Week 19


Project Development


Assignment.


Complete your final project, tracking your progress:



As I start my Fab Academy I made the Gantt chart that help me alot to make almost possible the Final Project with in Time. And I can say that the overall works complete atleast 80% according to the Gantt chart I made to follow during the Fab Academy. In Gantt Chart I Decide to fully Understand the Fabacadmy and Fab lab in First 8 weeks and after that I focused On the Final Project as inGiven Grant chart.




Gantt Chart for Fabacademy final project.


what tasks have been completed, and what tasks remain?




* Laser cutting of the structure is complete

* 3D printing of the nozzle is complete

* Atmega 328p board is working

* Testing of on/off button is complete

* Testing of microcontroller board and sensors is complete

* Testing of Pump is Complete

* 3D printing of the Circular part is remainig

* Assembly of all the components are remaining

* Lcd Testing is remaining


WHAT HAS WORKED? WHAT HASN'T?


Microcontroller board, all other electronic parts are working perfect. Chasis of the projected are complete. 3D printed Nozzle is complete . The LCD Interfacing has some problem and not working well. So Working on it.

WHAT QUESTIONS NEED TO BE RESOLVED?



* How to design and print the circular part of the project.

* How to Interface the LCD with with the Microcontroller.

* how to make slot for hanging the project in wall


WHAT WILL HAPPEN WHEN?



Most of my final project work is done. I have planned weeks in this way that my weekly assignment should cover portion of my final project. *Need 3 hours to design and print the circular part.

*Need 2 hours to interface the LCD with Micro Controller.

* Need 2 hours to Assemble the different Parts.

*Final project poster is remeaning. I need 3 to 4 hours to make it.

* Final project video is remeaning. . I need 2 to 3 hours to record it and then edit it.


What have you learned?



As being an Electrical engineer I have some basic know how of electronics part but there were a lot of things which are completely new to me like web desining, wood work, composite, Molding and casting. I have learned so many new things as

* 2D 3D Designing

* 3D Printing

* Networking

* * Vinyl Cutting

*PCB Designing, Milling and Soldering

*Press-Fit Techniques

*Manual Drilling

*Arduino Programming on differnet boards

* Laser Cutting

* Making application and Interface it with circuits