While working on the project, I kept all my parts in one box which led to a huge caos.
So I thought about it because I need a box where I can keep everything neatly.
This looks again like the robot system or the soapbox in small.
I built a box. The body is made of wood and I made it with the shaper origin like in week Computer-Controlled Machining Week. For the openings I cut colorful acry slices with the laiser cutter as in week Computer-Controlled Cutting.
In the box is a lot of space for the dice and also for finished robots.
Now I have a box but if I put everything in there it will be put back together again. Therefore I have like in the wildcad week with adapted bpxen deep-drawn.
First of all I cut shapes with the laser cutter as a basis for deepening.
Then I ahve all my molds deep-drawn.
I have deep-drawn boxes for the wheels, the circuit boards and the adapters.
The boards fit perfectly into the form.
The boxes all have a hole in the middle in the shape of a cross. So I can put them on a holder.
The lid is fixed at the top with a screw and keeps the boxes and the holder in the right position.
