Fab Academy 2014,
Masato Takemura
Weekly Assingments
Sketch of my final presentaition
Jan 29,2014
[Sketch]
I would like to make a vending machine connected to internet.
It helps people who want to sell personal products.
This vending machine have a special function below.
>Function1: Make sumnail automaticaly.
>Function2: Upload information of stock to shoping site.
[Concept]
If you have something not-need, you will want to sell at recycle-shop or by auction site like e-bay.
If you are small farmer, you want to sell vegetables you picked up as soon as possible.
If you are Maker, you want to sell something you made.
If you are ...
You have something to sell. However the way to sell something is not covenient. I'll make a box that makes your stuff sold easily.
My concept is connecting "unattended sales place" to internet. I was inspired by coin-operated locker type of unattended sales place.
 |
 |
 |
 |
 |
 |
[Description]
How to use
1.Put something you want to sell into box.
2.You decide value and input it.
3.This machine take pictures automaticaly and send them to website.
4.After it is sold, you open the box and put out the stock and send it.
Feature
-Web-Camera and turn table
-7 segments LED for value panel
-connected to PC
-I make demo web shop
fig. Hardware description
[Final Project Schedule]
| item | Apr1 | Apr2 | Apr3 | Apr4 | May1 | May2 | May3 | May4 | Jun1 |
| Make Case | * | ||||||||
| Make Circuit | * | ||||||||
| Make embudded program | * | ||||||||
| Make WebSite | * | ||||||||
| Make raspberry-pi program | * | ||||||||
| Debug | * | ||||||||
| Debug | * | ||||||||
| Documentation | * | ||||||||
| Debug | * | ||||||||
| Presentation | * |
[Web Site]
FabAcademy require us to make our own website. It's for recording our load of learning. I construct this web site by using "Aptana Studio". It's an Open source project IDE. I installed Aptana osx version. It's my first try to use this software.
