Computer aided design
Experiments with the with the FPE flexible filament for a jobin the Lab weren't as smooth as we hoped.
Lots of clogging and extruder disassembly.
When we were taking the extruder apart, whe heard a little cracking noise. Inspecting it, found that the piece of plastic used to support the extruders along the linear guides could be a possible guilty
When we were taking the extruder apart, whe heard a little cracking noise. Inspecting it, found that the piece of plastic used to support the extruders along the linear guides could be a possible guilty
I used Rhino and a calliper for modelling purposes, maybe this was better suited
for scanning, but the model was also easy enogh to model by hand. It also helped that a .STL file was available
so i could check for inconsistencies in measures.