Equipment Details
Geppeto is a custom built desktop CNC designed for medium builds for machining waxh and wood for assignments such as moulding and casting. Gepetto is body is a combination of 3D printed and extruded alluminum, with Nema 17 motors and an Arduino CNC sheild as hardware and a GRBL controller for firmware. He was made from an open source machine available on Thingiverse. A photo of the original design and the specifications are included below.
| Custom DIY Dremel CNC | |
|---|---|
| Machine Type | 3030 Single Head CNC Router Woodworking Machine |
| Table Size | 300 x 500 mm |
| Work Plan | 300 x 300 x 100 mm |
| Number of Axes | Three |
| Maximum Empty Travel Speed | 4800 mm/min |
| Working Speed | 4800 mm/min |
| Operation type | Linear bearings with lead screw (all axes) |
| Spindle Power | 500 W airc cooled spindle |
| Spindle Speed | 0-12000 rmp |
| Motor | Nema 17 |
| Operating Voltage | AC220V, 50HZ |
| Run Command | G Code |
| Operating System | UGS platform |
| Support Software | FreeCAD, Inkscape, Mods |