Final Project Development

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

What tasks have been completed, and what tasks remain?

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

Currently I've designed and milled a double-sided board, programmed it and embedded it with the 6 RGB LEDs, and I've finished creating the glasses frames. I also have a rough idea of how the battery will fit.

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯

What has worked? what hasn't?

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

So far what hasn't worked is the silicone encasing I made for the glasses, the old draft for my glasses worked but they weren't working out with the layout for my glasses frames, making the double-sided pcb without outlining the board first, and the very delicate ISP that I'm using for my glasses PCB is troubling. What has worked is the programming, soldering process, hinge making, and assembly process.

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯

What questions need to be resolved?

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

I need to resolve how I'll incorporate a sensor, what I can do if one of the LEDs stops working. I would also include "where the components will fit" but I have a place for them, I just have to figure out how to keep them in place.

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯

What will happen when?

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

Currently I've designed and milled a double-sided board, programmed it and embedded it with the 6 RGB LEDs, and I've finished creating the glasses frames. I also have a rough idea of how the battery will fit.

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯

What have you learned?

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

I've learned how to mill, design, and make a double-sided PCB, I also learned how to make hinges (and drill through them) + fitted clips, I learned how to cut bolts using and angle saw (with cutting and finishing) and also a dremel saw (with cutting and finishing).

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯

╭─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╮

You can find my documentation of the project here.

╰─━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━─╯