Final Project¶
My Final Project will be a sensor used at public doors that will warn people about the presence of persons at the another side, so they would be able to avoid hitting them.
I also hope to be able to design a flamboyant sticker to go with it and make sure everybody notice the warning!
To have a glance to the “Proof of Concept” of this project please have a look at my week 12 assignment page “Output Devices”
Research¶
I got the idea from the minute 0:52 of the attached You Tube video:
2D and 3D Modeling¶
This is the box that will contain the ultrasound sensor of my project…
Some other section¶
This will follow later…
Materials¶
Qty | Description | Price | Link | Notes |
---|---|---|---|---|
1 | Material one | 22.00 $ | http://amazon.com/test | Order many |
1 | Material two | 22.00 $ | http://amazon.com/test | |
1 | Material three | 22.00 $ | http://amazon.com/test | |
1 | Material five | 22.00 $ | http://amazon.com/test | |
1 | Material eight | 22.00 $ | http://amazon.com/test | |
1 | Material twelve | 22.00 $ | http://amazon.com/test | |
1 | Material eleven | 22.00 $ | http://amazon.com/test |
Useful links¶
Code Example¶
Use the three backticks to separate code.
// the setup function runs once when you press reset or power the board void setup() { // initialize digital pin LED_BUILTIN as an output. pinMode(LED_BUILTIN, OUTPUT); } // the loop function runs over and over again forever void loop() { digitalWrite(LED_BUILTIN, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }
Gallery¶
Video¶
From Vimeo¶
Sound Waves from George Gally (Radarboy) on Vimeo.