First week

INTRODUCTION : PRINCIPLES AND PRACTICES

<< Back

ASSESSESMENTS

HAVE YOU TASK COMPLETED
Described and made a sketch of your Final Project Yes
Described what it will do and who will use it Yes

NEIL´S LESSON

Fab-20180117B_Introduction: principles and practices from Academany on Vimeo.

First Task : Sketch a possible Final Project :

A Kite for use as an enviroment measure tool in robotics summer camps.

The Kite should to detect toxic gases at the atmosphere for use this data as a tool for experiments.

Draw is not my best skill but... here is the sketch :

  • The Kite will to have high bright leds for indicate the high presence of CO2 in the sky during the nights and write data values from the sensors with the possibility to show later for my little students conclusions.

  • The sensors will to detect the temperature and the presence of CO2 as i mentioned.

  • The assembled should to be soft so the idea is work in soft circuits for wire the electronics.

    Also i develope a web page about my proposal where i included a fabric sketch and with references and researches made which you can visit here :

    MY FINAL PROJECT PROPOSAL
    <

    • THINGS LEARNED

    First of all, as i made an intensive research, i learned lot references about Kites: Types, models,researches, looking in what ways make sense to continue....

    << Back