JIN`s Fab Academy 2018:
How to make almost everything

what tasks have been completed, and what tasks remain?

I used an acceleration sensor and a neopixels using an aduino.
I have used an acceleration sensor in week 11 input.
I was concerned about having to stabilize the acceleration sensor because there were occasions when it would be high values.
And week 12 output seems to make better result by using RGB LED.

I wanted to connect to Bluetooth and receive data with a cell phone application, but I could not implement it because I did not have enough time to make one.
I'm so sorry about this. I also wanted to collect human heart data by connecting a heart sensor but could not implement it due to lack of time.
I will continue to develop and upgrade my Final project.

what has worked? what hasn't?

borrowed a CPR manekin and tried CPR. The accuracy was checked while checking the acceleration sensor values.
So I collected data. However, it was not able to verify the exact value.
It was difficult to know how to verify this and whether it was actually right to measure the accuracy of CPR at the value of acceleration.
I could not create a verified device because it was difficult to find information on this part.

what questions need to be resolved?

I wonder if the accuracy of CPR can be implemented as an acceleration sensor from above.
If you see my Final project and know about it, please send me an email. njh@tideinstitute.org

what will happen when?

I dream of saving a life when a patient with a heart attack collapses in front of me.

what have you learned?

I learned about various digital fabrication, electricity, PCB, and others through FabAcademy.
But I could learn not only technology but also what I could do, what I wanted to do, and the value of others.
I was able to understand the culture of SharePoint through Messing, and it seems that I have created a CPR band, which is my final project, through its sharing and value. I learned all this.

How will I compleat the remaining tasks in time?

-5,6,7,8,9,10th: cording and pcb design -11th: gather data (CPR Manekin) -12,13th: 3D modeing (my CPR band design) -14th:Making watchband (molding and Casting, lasercutting) -15th:Making CNC (CPR band appearance) -16th: Making CPR band (My HOTSET) -17th: Debugging -18th: Presentations