06.electronics design


making circuit

I used EAGLE. First,I read the library data of components, and wire them.

circuit

circuit

designing board

I made a design pattern from circuit. Refering the template, added a LED and a switch. I add pull-up resistor to a switch.

designing board

designing board

After having been completed, I check the clearance using DRC, I made modifications until error disappeared.

cheked on DRC

cheked on DRC

soldering and making cable

I cut it in modela as having done it before. It was completed after soldering components.

board

board

I made a cable to connect ISP.

cable

cable