Embedded Programming

PHASE 1 |Programming the electronic design board

Since I am not familiar with programming languages, I chose the arduino software for embedded programming.

When you push the button the LED turns off as long as you are still pushing the button down.

This is the board:

Conneting it to the programmer and programming using Arduino.

1- Burn Bootloader to be able to upload the code on the IC

2- Choose the IC: ATtiny 44

3- Compile and upload the code

REFLECTION:

I chose to use arduino since this project can be fulfillingly programmed with arduino.
After designing the circuit board from scratch, I was curious no know wether it's going to work properly at the end, and fortunately it did.
Arduino programming language is also very easy to learn, so it was saticfying and it urged me to practice it more.

mariamwaelgado@gmail.com

http://mariamwaelgado.wix.com/
mariam-wael