I started by milling and
stuffing the hello 45 bridge and two nodes. Making the boards is
now becoming easy, but I have had trouble shooting problems with
my FABISP which has proved to be tricky. It turns out I needed
power on the board so adding the o ohm jumper SJ2 solved the
problem, so exciting to now have 2 ISP’s working well. Great!
I followed the Networking –
hello serial Bus tutorial carefully and all went according to
plan.
Workflow for programming boards
Download board files and code
Connect boards to FAB ISP and
FTDI header from computer to bridge board
Modify the c code for each
board and give each board a different ID number
What next
Practice programming the
network and designing my own example