Output Devices - RGB LED (Week 12)
This assignment was the easiest and fun to make. The basic process documentation can be found here.
I chose RGB LED to complete the assignment and began by milling the board, which by now, has become my expertise !
Next up was soldering the components. This step was quick too, as the number of components on this board are very less.
I used AVRISP2 to program my board, as I wasnt successful in completing the fabISP excercise. The AVRISP2 gave me a green light, which indicated correct soldering.
I changed the sudo command to reflect avrisp2 and successfully managed to program the board. The LED blinked immediately, as seen in the video here.