I prepared this Fusion reference with Codex assistance from the original DXF files.
It extrudes the largest closed region in each drawing through a reference 18 mm.
Part 1 has a 400 x 400 mm envelope; parts 2 and 3 are 400 x 410 mm. These are
model dimensions, not caliper measurements of cut parts. The selected top region
has openings through its full thickness; this does not reconstruct the original
VCarve pocket depths. Use the saved VCarve project for that machining history.

The .f3d contains imported sketches and a stock_thickness parameter. It is not
recovered SolidWorks history. The layout spaces the three parts for inspection;
it is not an assembly, actual stock nesting or evidence of a larger new build.
The script in ../Fusion_DXF_Reference can regenerate the exports inside Fusion.
