{
  "controller": "Standard Seeed Studio XIAO RP2040",
  "firmware": "grblHAL",
  "upstream_revision": "2f5bc4a06ecea3b1f78c1644623810f9b6416376",
  "core_revision": "4ec1ae44b857a70d2f9298344feac4b43ed0eb6b",
  "servo_plugin_revision": "265711922037cab6b6e47a9560ef11da3a6e5f83",
  "pico_sdk": "2.2.0",
  "compiler": "arm-none-eabi-gcc 9.3.1",
  "cmake_board": "seeed_xiao_rp2040",
  "build_result": "success",
  "usb_serial": true,
  "servo_plugin_linked": true,
  "uf2_bytes": 502272,
  "uf2_sha256": "88e0180144e5ff657941eecd36f9078538eabe8a17ec81df982a764151330543",
  "physical_tests_performed": false,
  "limitations": [
    "Driver model and input interface are not confirmed.",
    "No board was flashed and no machine motion was tested.",
    "Motor scaling, directions, enable polarity, switches and servo angles require commissioning."
  ],
  "calculated_starting_steps_per_mm": 49.6873969
}