{
  "units": "mm",
  "status": "CAD prototype; not fabricated",
  "stock_mm": {
    "base": 12,
    "bed": 6
  },
  "printed_adapters": [
    {
      "part": "cnc_end_riser",
      "quantity": 2,
      "size_mm": [
        36.0,
        70.0,
        15.0
      ],
      "valid": true,
      "watertight": true
    },
    {
      "part": "cnc_centre_riser",
      "quantity": 1,
      "size_mm": [
        32.0,
        64.0,
        15.0
      ],
      "valid": true,
      "watertight": true
    },
    {
      "part": "cnc_bed_spacer",
      "quantity": 4,
      "size_mm": [
        12.0,
        12.0,
        16.0
      ],
      "valid": true,
      "watertight": true
    },
    {
      "part": "cnc_corner_foot",
      "quantity": 4,
      "size_mm": [
        28.0,
        28.0,
        8.0
      ],
      "valid": true,
      "watertight": true
    }
  ],
  "motion_checks": [
    {
      "x": -100,
      "bed_y": -75,
      "collisions": []
    },
    {
      "x": -100,
      "bed_y": 0,
      "collisions": []
    },
    {
      "x": -100,
      "bed_y": 75,
      "collisions": []
    },
    {
      "x": 0,
      "bed_y": -75,
      "collisions": []
    },
    {
      "x": 0,
      "bed_y": 0,
      "collisions": []
    },
    {
      "x": 0,
      "bed_y": 75,
      "collisions": []
    },
    {
      "x": 100,
      "bed_y": -75,
      "collisions": []
    },
    {
      "x": 100,
      "bed_y": 0,
      "collisions": []
    },
    {
      "x": 100,
      "bed_y": 75,
      "collisions": []
    }
  ],
  "scope": "Checks printed and plywood solids at nine X/Y poses. Hardware, cutting feeds, cord behaviour and physical accuracy are not validated."
}