# This is an example config file for pcb2gcode.
# Rename this file "millproject" and place it in the same directory as your
# gerber files to save typing
# <option>=false is implicit, it is present just for clearness

# You may want to uncomment and change those in local project files (or you
# can specify them directly as command line arguments)
#front=copper_top.gbr
back=copper_bottom.gbr
outline=profile.gbr
drill=drill_1_64.xln
#preamble=preamble.ngc
#preamble-text=preamble_text.txt
#postamble=postamble.ngc

# Common options
metric=true
metricoutput=true
#mirror-absolute=false
optimise=0
zchange=10.0000
zero-start=true
zsafe=5.0000

# Mill options
#extra-passes=0
extra-passes=100
mill-feed=240
mill-speed=10000
#offset=0.2500
offset=0.1000
#offset=20  # Uncomment (and comment the previous line) for voronoi regions
zwork=-0.1000
voronoi=false  # cuts the milling time significantly, but check with this on and off if everything looks ok
preserve-thermal-reliefs = true # has effect only if voronoi=true

# Drill options
drill-feed=100
drill-side=auto
drill-speed=10000
milldrill=true
milldrill-diameter=0.5
nog81=false
onedrill=false
zdrill=-1.7000

# Outline options
bridges=0.5000
bridgesnum=0
cut-feed=150
cut-side=auto
cut-infeed=10.0000
cut-speed=10000
cutter-diameter=0.8
fill-outline=1
zbridges=-0.6000
zcut=-1.7000

# Autoleveller options
# al-back=false
# al-front=false
# al-probefeed=100
# al-x=15.0000
# al-y=15.0000
# software=LinuxCNC