#define PIR_PIN 2
#define LED_PIN 10
#define LED_PIN2 3

void setup() {
  Serial.begin(115200);

  pinMode(PIR_PIN, INPUT);
  pinMode(LED_PIN, OUTPUT);
  pinMode(LED_PIN2, OUTPUT);

  Serial.println("PIR Sensor Initializing...");
  delay(60000); // 1 minute stabilization
  Serial.println("Ready!");
}

void loop() {
  int motion = digitalRead(PIR_PIN);

  

  if (motion == HIGH) {
    Serial.println("Motion detected!");
    digitalWrite(LED_PIN, LOW);   // ON (inverted logic)
     digitalWrite(LED_PIN2, HIGH);
  } else {
    Serial.println("No motion");
    digitalWrite(LED_PIN, HIGH);  // OFF
     digitalWrite(LED_PIN2, LOW);
  }

  delay(500);
}