#include <DHT.h>

#define DHTTYPE DHT11
#define DHTPIN D7

DHT dht(DHTPIN, DHTTYPE);

void setup() {
  Serial.begin(115200);
  delay(1000);

  dht.begin();
  Serial.println("DHT11 sensor ready");
}

void loop() {
  float humidity = dht.readHumidity();
  float temperature = dht.readTemperature();

  if (isnan(humidity) || isnan(temperature)) {
    Serial.println("ERROR reading DHT11");
    delay(2000);
    return;
  }

  Serial.print("TEMP:");
  Serial.print(temperature);
  Serial.print(",HUM:");
  Serial.println(humidity);

  delay(2000);
}