Laser Gauge Tool

Laser Gauge Tool
Parametric Generator

Laser Gauge Tool

Generate precision laser-cut pressfit gauges to dial in kerf, compression and power settings for any material.

Parameters

Material & Kerf

mm
mm
mm
 

Power Scale

%

Board Dimensions

mm
mm
mm
mm

Kerf Test Square

mm
SVG Preview
Click Generate Preview to see your gauge

Gauge tip: First slot = thickness (t), then t-k, t-k-c, t-k-2c… The snug fit with no force is your ideal setting.  |  Kerf test: Outer border is square size + 20 mm (10 mm padding each side). Measure the cut square and compare with nominal to calculate real kerf.

Note on the AI prompt: I hadn’t noted down the AI prompt I used to generate this page. That was a mistake on my part, and I’ll make sure to record prompts for future ai related works.