Assignments

Group assignment: Observing a Microcontroller with Test Equipment ✅

Used the Multicomp PRO MP720780 handheld oscilloscope/multimeter to observe the operation of an RP2040-based LED blinking circuit.

Individual assignment: Simulate a Circuit ✅

Used Wokwi to simulate a traffic light circuit on a Pi Pico with three LEDs.

Individual assignment: Design an Embedded Microcontroller System ✅

Used KiCad 9.0 to design a PCB with a Raspberry Pi Pico W and 3 LEDs with 220 ohm resistors, including schematic capture, footprint assignment, PCB layout and design rules check.