'VECTRIC POST REVISION
'90F96787DA0D140DD9CF843C14DAE4D8
'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN INCHES
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = 0.000
'Maximum extent in X = 41.000 Maximum extent in Y = 48.000 Maximum extent in Z = 0.490
'Length of material in X = 41.000
'Length of material in Y = 48.000
'Depth of material in Z = 0.490
'Home Position Information = Bottom Left Corner, Table Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 1.290000
'Rapid clearance gap or Safe Z = 0.690
'UNITS:Inches
'
IF %(25)=1 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = dorian-edge-Profile-1/4spiral
'Tool Name   = #46202 SC DOWN CUT SPIRAL 1/4" DIA.

&PWSafeZ = 0.690
&PWZorigin = Table Surface
&PWMaterial = 0.490
'&ToolName = "#46202 SC DOWN CUT SPIRAL 1/4" DIA."
&Tool =1           'Tool number to change to
C9                   'Change tool
TR,18000               'Set spindle RPM
C6                   'Spindle on
PAUSE 2
'
MS,1.0,0.5
JZ,1.290000
J3,1.128656,1.795169,
J3,1.128656,1.795169,0.690000
M3,1.128656,1.795169,0.245000
CG, ,1.003656,1.920169,0.000000,0.125000,T,1
M3,1.003656,13.576277,0.245000
M3,1.003656,14.326277,0.245000
M3,1.003656,23.920170,0.245000
CG, ,1.128656,24.045170,0.125000,0.000000,T,1
M3,17.596027,24.045170,0.245000
M3,18.346027,24.045170,0.245000
M3,34.128654,24.045170,0.245000
CG, ,34.253654,23.920170,0.000000,-0.125000,T,1
M3,34.253654,15.089414,0.245000
M3,34.253654,14.339414,0.245000
M3,34.253654,1.920169,0.245000
CG, ,34.128654,1.795169,-0.125000,0.000000,T,1
M3,17.752476,1.795169,0.245000
M3,17.002476,1.795169,0.245000
M3,1.128656,1.795169,0.245000
M3,1.128656,1.795169,0.000000
CG, ,1.003656,1.920169,0.000000,0.125000,T,1
M3,1.003656,13.576277,0.000000
M3,1.003656,13.576277,0.125000
M3,1.003656,14.326277,0.125000
M3,1.003656,14.326277,0.000000
M3,1.003656,23.920170,0.000000
CG, ,1.128656,24.045170,0.125000,0.000000,T,1
M3,17.596027,24.045170,0.000000
M3,17.596027,24.045170,0.125000
M3,18.346027,24.045170,0.125000
M3,18.346027,24.045170,0.000000
M3,34.128654,24.045170,0.000000
CG, ,34.253654,23.920170,0.000000,-0.125000,T,1
M3,34.253654,15.089414,0.000000
M3,34.253654,15.089414,0.125000
M3,34.253654,14.339414,0.125000
M3,34.253654,14.339414,0.000000
M3,34.253654,1.920169,0.000000
CG, ,34.128654,1.795169,-0.125000,0.000000,T,1
M3,17.752476,1.795169,0.000000
M3,17.752476,1.795169,0.125000
M3,17.002476,1.795169,0.125000
M3,17.002476,1.795169,0.000000
M3,1.128656,1.795169,0.000000
J3,1.128656,1.795169,0.690000
J3,1.128656,24.649094,0.690000
M3,1.128656,24.649094,0.245000
CG, ,1.003656,24.774094,0.000000,0.125000,T,1
M3,1.003656,34.774525,0.245000
M3,1.003656,35.524525,0.245000
M3,1.003656,46.774094,0.245000
CG, ,1.128656,46.899094,0.125000,0.000000,T,1
M3,17.256855,46.899094,0.245000
M3,18.006855,46.899094,0.245000
M3,34.128654,46.899094,0.245000
CG, ,34.253654,46.774094,0.000000,-0.125000,T,1
M3,34.253654,35.694111,0.245000
M3,34.253654,34.944111,0.245000
M3,34.253654,24.774094,0.245000
CG, ,34.128654,24.649094,-0.125000,0.000000,T,1
M3,18.346027,24.649094,0.245000
M3,17.596027,24.649094,0.245000
M3,1.128656,24.649094,0.245000
M3,1.128656,24.649094,0.000000
CG, ,1.003656,24.774094,0.000000,0.125000,T,1
M3,1.003656,34.774525,0.000000
M3,1.003656,34.774525,0.125000
M3,1.003656,35.524525,0.125000
M3,1.003656,35.524525,0.000000
M3,1.003656,46.774094,0.000000
CG, ,1.128656,46.899094,0.125000,0.000000,T,1
M3,17.256855,46.899094,0.000000
M3,17.256855,46.899094,0.125000
M3,18.006855,46.899094,0.125000
M3,18.006855,46.899094,0.000000
M3,34.128654,46.899094,0.000000
CG, ,34.253654,46.774094,0.000000,-0.125000,T,1
M3,34.253654,35.694111,0.000000
M3,34.253654,35.694111,0.125000
M3,34.253654,34.944111,0.125000
M3,34.253654,34.944111,0.000000
M3,34.253654,24.774094,0.000000
CG, ,34.128654,24.649094,-0.125000,0.000000,T,1
M3,18.346027,24.649094,0.000000
M3,18.346027,24.649094,0.125000
M3,17.596027,24.649094,0.125000
M3,17.596027,24.649094,0.000000
M3,1.128656,24.649094,0.000000
J3,1.128656,24.649094,0.690000
JZ,1.290000
J3,0.000000,0.000000,1.290000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END