Export SVG from Kicad¶
Kicad 9 was recently released. And it looked like the export or plot settings to SVG files changed.
The work around is this:
We need to export or plot the upper copper layer and the edge cut:
- Plot the traces:
-
Check the F.Cu in the “Include Layers” section as the Edge.Cuts in the “Plot on all layers” section.
-
Open the export SVG in Inkscape:
-
Go to: File –> Document Properties
-
Tick “Resize to content”
-
Delete the edge cut
-
Save to SVG file
Repeat all steps for the edge cuts:
- Import SVGs in mods