Locus Pocus - Bill of Materials
The following materials were used in creating the Locus Pocus system.
| # | Item | Unit Cost | Total | Source |
|---|---|---|---|---|
| 1 | Prusament PLA Filament | USD 35.99 | USD 35.99 | Lab Inventory, Printed Solid |
| 3 | 1/8" Baltic Birch Plywood 12x24 | USD 3.75 | USD 11.25 | Lab Inventory, Makerstock |
| 1 | 1/4" Threaded Rod, 6" length (x8) | USD 9.56 | USD 9.56 | Purchased, Amazon |
| 1 | 1.4" Tee Nut (x13) | USD 11.12 | USD 11.12 | Purchased, Amazon |
| 1 | 1/4" Hex Nut (x100) | USD 12.49 | USD 12.49 | Purchased, Amazon |
| 5 | 1/4" Jam Nut (x4) | USD 1.98 | USD 9.90 | Purchased Amazon |
| 1 | 28BYJ-48 Stepper Motor / Driver Board (x5) | USD 14.99 | USD 14.99 | Purchased, Amazon |
| 1 | XIAO ESP32C3 | USD 4.99 | USD 4.99 | Lab Inventory, DigiKey |
| 1 | PCB Milling Stock (x25) | USD 44.99 | USD 44.99 | Lab Inventory, Bantam Tools |
| 4 | 2 Position Female Header | USD 0.45 | USD 1.80 | Lab Inventory, DigiKey |
| 1 | 3 Position Female Header | USD 0.51 | USD 0.51 | Lab Inventory, DigiKey |
| 1 | 4 Position Female Header | USD 0.67 | USD 0.67 | Lab Inventory DigiKey |
| 1 | LED - Orange | USD 0.34 | USD 0.34 | Lab Inventory, DigiKey |
| 1 | Tactile Switch (Button) | USD 0.75 | USD 0.75 | Lab Inventory, DigiKey |
| 1 | Arduino UNO R4 WiFi | USD 27.50 | USD 27.50 | Lab Inventory, DigiKey |
| 1 | Sunfounder Case - Arduino UNO R4 WiFi | USD 8.99 | USD 8.99 | Lab Inventory, Amazon |
| 1 | 2-in-8-out Terminal Block (x6) | USD 10.99 | USD 10.99 | Purchased, Amazon |
| 2 | Ribbon Cable Kit | USD 6.98 | USD 13.96 | Purchased, Amazon |
| 1 | Crimp Connector Kit | USD 14.99 | USD 14.99 | Purchased, Amazon |