Inspiration

Inspired by the RoboCar - An autonomous racing car founded by Denis Sverdlov Founder of Arrival - a British EV manufacturer in 2015. The world’s First purpose-built autonomous racing car was designed by Daniel Simon, who worked in Tron:Legacy Movie.

Scope of Build

With experience in building SAE event-baja cars for more than 5 years, I have full confidence in building the roll cage and mechanism design. FabLab Salem and with support from the mechanical fabrication laboratory, we can build roll cage and other required parts. For electronics component developer kits can be retrofitted to the design. RoS developers are required to develop open-source software.

#	Hardware Components	Expert	Cost
1	Chassis Design and Fabrication	Self	$500
2	Sensor	Of the Shelf	$1000
3	Computing Platform	Developer	$500
4	Other Cost		$1000
		Total	$3000

The project is possible with 60% sponsorship or contribution from external stakeholders

Final Project Concept 02

TableTop Wind-Tunnel

Wind tunnel to test the aerodynamics of 1:64 Diecast cars

Inspiration

I am a mechanical engineer with computational fluid dynamics as my area of expertise also a hobby Diecast collector with over 100 models. I always wanted to build a wind tunnel to test the aerodynamics of diecast cars. Recently Fun-Tech-Lab has built a desktop model “Windsible” priced at about $250 = 21,500 INR, an expensive model.

Few models from the Collection

Proof of Concept

Fun-Tech-Lab “Windsible”

Scope of Build

With knowledge on Fluid Dynamics and Product Design can build an affordable DIY tabletop AeroDyno kit to test Diecast models.

#	List of Materials required	Cost
1	Acrylic Sheets 4x4 ft	$10
2	Ultrasonic mist creator	$10
3	Electronics controller (Build-in-lab)	$5
4	Other Cost	$10
	Total	$35

<<Back to Home