//Defining which pin to use for LED and button
    #define LED 4
    #define BUTTON 0
    
    //Variable to keep track of how many button presses
    uint8_t buttonPresses = 0;

    //Defining what is input and what is output or input and pullup
   
    void setup() { 
        pinMode(LED, OUTPUT);
        pinMode(BUTTON, INPUT_PULLUP);
    }

    //Creating a loop that follows a pattern and then repeats itself
    void loop() { 
      //Defining what happens if button is pressed  
      if (digitalRead(BUTTON) == HIGH) {  
      // Increment buttonPresses
        buttonPresses++;

    //If buttonPresses is greater than 4, reset it to 0
    if (buttonPresses > 4) {
      buttonPresses = 0; 
    }

    // Blink LED based on buttonPresses count
    for (uint8_t i = 0; i < buttonPresses; i++) {
      digitalWrite(LED, HIGH);
      delay(200);
      digitalWrite(LED, LOW);
      delay(200);
  }  

    // Wait for button to be released
       while (digitalRead(BUTTON) == HIGH) {
       } 
     }  
  }