ASSEMBLYING AND DEMONSTRATION¶
7.Assemblying and testing.¶
7.1 Assemblying CLEAN device(MCU-2) Firstly, i have mounted the mini water pump into its slot of the base.The pump hose and terminals were sent up via the threaded hole of the connector to the top MCU-2 case.
The pump hose was further sent via the track outside to the nozzle and pump terminals connected to the terminal block.
The pump hose was connected to the nozzle and covered with the lid.
7.2 Assemblying CHIRP device(MCU-1)¶
Learning Outcomes from this assignment¶
Remaining tasks¶
- Adding Vinyl stickers, naming the two devices as CHIRP and CLEAN.
- Video compiling(presentation)