Andrew Mark

Portland OR, USA

Artist, Design Engineer, and Professional fabricator

[ Early Stage Product Development] [ Museum Grade Exhibit Fabrication ] [ 3D printing ]

Check out my other work

Google Home / Chrome — Convention Booth

Part of the team at PVS graphics Portland responsible for the design for build as well as fabrication of the google home and chrome large format convention booths.

Nike Campus Shoe Box—Event Piece/Activation

Part of the team at PVS graphics Portland responsible for the design for build and fabrication of a large format printed cardboard Nike shoe box.

Keen Footwear WK400— Shoe Display

I was the lead in developing the pendulum gear cassette for fabrication using our in house CNCs. The mechanism allows the user, through a single downward pull to raise and release the shoe carrier so it swings freely.

Spirit of 77 — Custom Pop A Shot Scoreboards

I was commissioned to rebuild a custom project that had seen 8 years of non stop abuse. I completely redesigned the 4 scoreboard displays from the ground up ensuring reliability and repairability. The front polycarbonate frame uses a custom 3D printed low infill TPU as a shock absorber to reduce the impact force on the front plastic.

Akrasia

Akrasia is an art project I have been developing about the passage of time. Is is composed of a stepper motor and hub less gear that rotate the hour glass over a 1 minute and 45 second cycle time. The hour glass is 2 minutes so it never quite completes its full cylce.