14. Networking and Communications¶
In the group assignment, participants will establish communication between two projects by sending a message. They are required to document this process on the group work page and provide personal reflections on their individual pages regarding the lessons learned. Meanwhile, for the individual task, each member will design, construct, and connect wired or wireless node(s) with network or bus addresses and a local interface.
Assigmnent checklist¶
| Item | Activity | Status |
|---|---|---|
| 1 | Linked to the group assignment page. | Done |
| 2 | Documented your project and what you have learned from implementing networking and/or communication protocols. | Done |
| 3 | Explained the programming process(es) you used. | Done |
| 4 | Outlined problems and how you fixed them. | Done |
| 5 | Included design files (or linked to where they are located if you are using a board you have designed and fabricated earlier) and original source code. | Done |
| 6 | Included a ‘hero shot’ of your network and/or communications setup. | Done |
Group Assigmnents¶
In this assignment, we will address the following tasks:
- Send a message between two projects.
- Document your work to the group work page and reflect on your individual page what you learned.
Individual Assigmnents¶
In this assignment, we will address the following tasks:
- Design, build and connect wired or wireless node(s) with network or bus addresses and a local interface.
Last update:
April 19, 2024