Skip to content

Task 1: Group Assignment

Link to Group Assignment here

Weekly Reflection
  • The multimeter is a great tool to check your freshly produced and stuffed board. Testing for continuity after you produce or stuff will make sure you are on the right track.
  • I always found the multimeter most useful measuring resistors because I still don’t really understand much about the coloured rings in resistors
  • The multimeter is great tool but if you are looking for a real-time accuracy, the oscilloscope is better for that purpose
  • Make sure to adjust the signal display with the time scale and voltage scale.
  • The sinewave difference between digital and analog is also interesting to see - if you have no oscilloscope - you can also use check sinewaves in Serial Plotter in Arduino IDE (although that means you need to upload code into an MCU)