#include <WiFi.h>
#include <PubSubClient.h>

const char* ssid = "MOVISTAR_0CD0"; // Replace with your SSID
const char* password = "6pN5745BmUSLphq"; // Replace with your password
const char* mqtt_server = "broker.emqx.io";

WiFiClient espClient;
PubSubClient client(espClient);

const int sensorPin = D0; // Infrared sensor Pin

void setup() {
  Serial.begin(115200);
  pinMode(sensorPin, INPUT);

  setup_wifi();
  client.setServer(mqtt_server, 1883);
}

void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();

  int sensorState = digitalRead(sensorPin);
  if (sensorState == HIGH) {
    Serial.println("Object detected");
    client.publish("cristian/test1", "1");
    delay(1000); // Wait to avoid multiple quick posts
  }
}

void reconnect() {
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    if (client.connect("ESP32Client")) {
      Serial.println("connected");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}