#include <IRremote.h>

int RECV_PIN = 26; // define input pin on Arduino 
IRrecv irrecv(RECV_PIN); 
decode_results results; // decode_results class is defined in IRremote.h

void setup() { 
	Serial.begin(9600); 
	irrecv.enableIRIn(); // Start the receiver 
} 

void loop() { 
	if (irrecv.decode(&results)) {
		unsigned long hexValueRead = results.value;

    Serial.println(hexValueRead);
    delay(1000);
		irrecv.resume(); // Receive the next value 
	}
	delay (100); // small delay to prevent reading errors
}