Skip to content

Final Project Summarized

Summary

The Tred Deck is my final project. It is a tredmill for the Tech Deck / finger skateboard. All electronics are run on an Attiny412, programmed in Arduino IDE. The input is a honeywell switch to change speeds and a Tetrix DC Motor to turn the tred. The tred, made with cardstock, is equipped with magnets which allows one to switch out the features on it allowing one to create their own ‘parks.’ Each feature is 3D printed and attach to themselves to make them as long as one wishes. There are also vinyl stickers on the sides for asthetics.

Last update: June 26, 2024