Final Project Idea¶
This page describes my final project idea.
INITIAL IDEA¶
First I had decided to make a vaccum cleaner for my final project But We haven’t all components required and also It was a quite complicate for me according the delay to make it so I change my Idea and I finally decided to make a DUAL AXIS SOLAR TRACKER
where my innovation is about the manual control optiion provided to my system.
I show a sketch of my idea below
After I start the project by designing the mechanical structure
and then I defined the equipments needed
1. OUTPUTS¶
Microstep driver DM542S 5-24VDC
or Any other driver2 stepper motors NEMA
1 LCD screen 1604
2. INPUTS¶
1 Rotary encoder module
1 joystick
The goal of this project is to provide a small system to the photovoltaic study. That’s mean that we will use it for testing how better is to get a dual axis solar tracker that we can control automatically or manually. What is the impact on the efficiency of the pannel according to its energy production All about my final project at this page
Change Project Idea¶
Because of the little time remaining and the subtle complexity of the project, I change my final project to do something that I think is very important as project Idea which is score board display.
below is the sketch
the different components integrate in the project
INPUT :
- 4 push button
- Bluetooth module
- infrared module
OUTPUT :
- P10 module LED matrix
- LCD screen
- Bluetooth module
The project will be very useful In our school cause we can use it for small competitions. I think It’s funnier to use it for friendly game.
More about my final project at this page