3. Computer controlled cutting¶
Hero Shot💡¶
My assignments for this week were :
Group assignment:
- Characterize your lasercutter’s focus, power, speed, rate, kerf, joint clearance and types.
- Document my work to the group work page and reflect on my individual page what I learned.
Individual assignment :
- Design, lasercut, and document a parametric construction kit, accounting for the lasercutter kerf, which can be assembled in multiple ways.
- Cut something on the vinyl cutter.
Group Assignment💡¶
Individual Assignment💡¶
Laser cutting
Parametric Design¶
Slicing with lasserbox¶
Machine
Logiciel configuration
Cutting¶
First configuration : Cube with an edge of 50 mm
L : 50 mm
e: 3 mm
Kerf : 0 mm
Second configuration : Cube with an edge of 100 mm
L: 100 mm
e: 3 mm
Kerf : 0 mm
Vinyl cutting
Design with Inscape¶
Slicing¶
Assembling¶
Last update:
May 9, 2024