Week17. Invention, Intellectual Property, and Income¶
| Assignment | |
|---|---|
| group | - |
| individual | develop a plan for dissemination of your final project, prepare drafts of your summary slide (presentation.png, 1920x1080) and video clip (presentation.mp4, 1080p HTML5, < ~minute, < ~10 MB) and put them in your root directory |
Photo of the week¶
Lecture Notes¶
Dissamination Plan¶
- by 01/06 struture fabricated
- by 03/06 PCB Slave attached to model and reading height
- by 06/06 signaling the height: physically- diode and remote BLE communication with HOST
- by 08/06 visual interpretation read by the HOST board
- by 10/06 integration of the design, additional sensor for presense?
- by 13/06 video
Murphy Law- what can go wrong -Risk Management¶
- structure of the model can break -> change of the material or scale –> rather change of the scale, as I have only a lot of PET material available
- the calibration of the gyroscope and accelometer of the nRF52840 can be not callibrated enough to measure real height -> check what values it shows, when model fully assembled and mark the heighest point as assembled stage
- BLE communication between SLAVE and HOST can be lost/not working -> focus on the physical signal
- PCBs destroyed (connecting wrong the cables from battery?) -> reading the height with other sensors available
licensed¶
This project is licensed under Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
CC - Creative Common License:
“© Judy Curie, 2023 This work may be reproduced, modified, distributed, performed and displayed for any purpose, but must acknowledge “MOREvLESS”. Copyright is retained and must be preserved. The work is provided as is; no warranty is provided, and users accept all liability.”
Drafts of Slide and Video¶
This slide and video were referenced in the final directory for the presentation:
Now the final video and slide are in the root directory and these files are referenced from the files for week 17.
Last update:
June 26, 2023