Reflection

Here are my downloadable files for this week.

Throughout this week, I learned that it was really important to thoroughly think through every step of what I do. For instance, I forgot to look up the melting point of acrylic to make sure that it was suitable under a heat gun before I made the box.

I was also reminded the saving my work is more important that ever, as I did not take a picture of the offset values for the roughing toolpath of the wheels, and had to pull them out of memory for the finishing toolpath. Luckily, it turned out to be fine. But it would have been ruined if I had been 1 mm off.

In the future, I will definitely improve based on these mistakes.

---

Last update: December 30, 2023