In this section we list the activities to be solved in the following table:
Checklist | Estatus |
---|---|
What tasks been completed? | Finished |
What tasks remain? | Finished |
What has worked? what hasn't? | Finished |
What questions need to be resolved? | Finished |
What will happen when? | Finished |
What have you learned? | Finished |
In the following assignment I must answer the following questions:
To develop my project I need a base for the lamp where the electronic part and the connections will go, and also the different sheets that will be placed on the lamp (lithophane, acrylic engraving, 3D printing) and most importantly the electronic part with FAB card XIAO RP2040, the KY-038 sound sensor and the WS2812B led strip.
Design stage:
Software for 2D and 3D design (GIMP, INKSCAPE, FREECAD, SOLIDWORKS, 3DP ROCKS), software for electronic design and production (EASYEDA, MODSPROJECT), software for Arduino IDE programming were used.
Manufacturing:
The tasks in their entirety were completed.
All tasks have been completed.
During the project tests, everything worked as expected with the FAB XIAO RP2040 card, the KY-038 sound sensor and the WS2812B led strip.
After finishing a project, new questions always appear. Some of the questions I have asked myself are: What improvements could be made to my project? What other materials could be used for the structure? In order to answer these questions it will be necessary to continue working on my project and why not, make a second version of it.
The objective of Fab Academy is that at the end of the course we present a final project that covers everything or almost everything learned in each week. The implementation of the project includes from its design, modeling, search for resources to its assembly, programming, tests, process documentation and final presentation.
Based on that, I organized the activities to be carried out as follows:
A detailed waterfall plan is shown in the following figure:
created with
Website Builder Software .