//****************************************************
// Alberto E. Cohaila B. - FabAcademy 2022
//****************************************************
// Water Sensor with Buzzer & ATTiny44A
//****************************************************

int sensor = 1;       // Signal of sensor level --> pin 1 (RX, FTDI)
int buzzer = 0;       // signal to buzzer       --> pin 0 (TX, FTDI)
int LEDGreen =  3;    // The number of the LED pin 3
int estadoSensor=0;

void setup() {
  pinMode(LEDGreen, OUTPUT);      
  pinMode(buzzer, OUTPUT);
  pinMode(sensor, INPUT);
}

void loop() {
  estadoSensor = digitalRead(sensor);
  
  if (estadoSensor == HIGH) {     
    digitalWrite(LEDGreen, HIGH);
    digitalWrite(buzzer, LOW);  
  } 
  else {
    digitalWrite(LEDGreen, LOW); 
    digitalWrite(buzzer, HIGH); 
  }
  delay(10);
}