dog bone in Fusion360¶
Sketch Parametric dogbone by you¶
Hole and pocket
- construction line
- Direction: inside the hole
- length: tool_dia/2
- angle: 45 deg
- circle
- Dia: tool_dia
Plug
- construction line
- Direction: outside the design
- length: tool_dia/2
- angle: 45 deg
- circle
- Dia: tool_dia
- Dia: tool_dia
Dogbone Addin¶
Install¶
Download site
Windows¶
Mac¶
-
If you installed Fusion360 directly from AutoDest - download self extracting file here
-
If you installed Fusion360 from Apple App Store - download self extracting file here
After insatll, re-boot Fusion360
Usage¶
Design joint t=12.0mm
Extrude to make body t=12.0mm
Use Dogbone Addin
- Tool Diameter = 6mm (depend on tool you use)
- Tool Diameter Offset may be needed
Measured Diameter of dogbone
Assemble
Other Dogbone Addin¶
- Nifty Dogbone for Autodesk® Fusion 360
- 60-day full functionality trial
- can purchase a perpetual license for $20 USD
Last update:
March 4, 2022