#include  <Wire.h>
#include  <LiquidCrystal_I2C.h>
#include <DFRobot_DHT11.h>
DFRobot_DHT11 DHT;
#define DHT11_PIN 3

LiquidCrystal_I2C lcd(0x27, 16,2);  // Ganti 0x3F dengan address I2C anda

void setup() 
{
  Serial.begin(115200);
 
  lcd.begin();
 
  lcd.backlight();
  delay(250);
  lcd.noBacklight();
  delay(250);
  lcd.backlight();
 
  lcd.setCursor(0,0);
  lcd.print("Fablab Kamakura");
  delay(1000);
  lcd.setCursor(0,1);
  lcd.print("Setyawan UGM");
  delay(3000);
      lcd.clear();
}

void loop() 
{

  DHT.read(DHT11_PIN);
  Serial.print("temp:");
  Serial.print(DHT.temperature);
  Serial.print("  humi:");
  Serial.println(DHT.humidity);
  lcd.setCursor(0,0);
  lcd.print("Temperature:");
  lcd.setCursor(13,0);
  lcd.print(DHT.temperature);
  lcd.setCursor(0,1);
  lcd.print("Humidity   :");
  lcd.setCursor(13,1);
  lcd.print(DHT.humidity);  
  delay(1000);
  
}