4. Computer controlled cutting

This week I worked on defining my final project idea and started to getting used to the documentation process.

Research

As far as research went I didn’t have much inspiration however the teacher at my fabacademy sent me a link for a ton of lasercut parametric cloth designs, which sent me on a spiral looking for a toy i have. And I took inspiration from this to make a design that i thought could make some fun dress or underwear designs.

Work

Useful links

• Jekyll
• Google
• Markdown

Code Example

Use the three backticks to separate code.

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);                       // wait for a second
  digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);                       // wait for a second
}

Gallery

Video

From Vimeo

Sound Waves from George Gally (Radarboy) on Vimeo.

From Youtube

3D Models

Dita's Gown by Francis Bitonti Studio on Sketchfab

---

Last update: April 11, 2022