<h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE>NAME>VALUE>NAME>VALUEGeneric Resistor Package<h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE>NAME>VALUE>NAME>VALUE<h3>1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><B>Wide Plastic Gull Wing Small Outline Package</B>>NAME>VALUE<b>OMRON SWITCH</b>>NAME>VALUE1234>NAMEATtiny45>NAME>VALUE<b>OMRON SWITCH</b><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 2x3 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3 Male Header with Keying Posts</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/15881.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 Pogo Pins</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:2.54mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle</h3>
tPlace shows angle of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>SMD - 6 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin Locking Header</h3>
Includes silk outline for 6 pin female header
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 6</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Header - 6 pin Female SMD</h3>
Right angle 0.1"
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin Holes</h3>
No silk, no plating
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p><h3> 6 Pin SMD Female Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header - Combined Footprint</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Male Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>JST SH Vertical 6-Pin Connector -SMD</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1mm</li>
<p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
<li>EM-406</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUEPlated Through Hole - 2x3 Shrouded Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Surface Mount - 2x3 Male Header with Keying Posts
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 Pogo Pins
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole - 2x3
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Surface Mount - 2x3
Specifications:
Pin count:6
Pin pitch:2.54mm
Example device(s):
CONN_03x2
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle
tPlace shows angle of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
SMD - 6 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint with Long Pads
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Plated Through Hole - 6 Pin Locking Header
Includes silk outline for 6 pin female header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Long Pads
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Screw Terminal 3.5mm Pitch -6 Pin PTH
Specifications:
Pin count: 6
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_06
Header - 6 pin Female SMD
Right angle 0.1"
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin Holes
No silk, no plating
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
6 Pin SMD Female Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header
Alternate pin configuration
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header - Combined Footprint
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Male Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
JST SH Vertical 6-Pin Connector -SMD
Specifications:
Pin count:6
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_06
EM-406
Plated Through Hole - 6 Pin No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:1.27mm
Example device(s):
CONN_06
<h3>6 Pin Connection</h3>
3x2 pin layout>NAME>VALUE<h3>6 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<p></p>
<b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/12807"> Header - 2x3 (Male, 0.1")</a> (PRT-12807)</li>
<li><a href="https://www.sparkfun.com/products/13010"> Header - 2x3 (Female, 0.1")</a> (PRT-13010)</li>
<li><a href="https://www.sparkfun.com/products/10877"> 2x3 Pin Shrouded Header</a> (PRT-10877)</li>
</ul>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b>Special note: the shrouded connector mates well with our 3x2 ribbon cables:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/10651"> Ribbon Crimp Connector - 6-pin (2x3, Female)</a> (PRT-10651)</li>
<li><a href="https://www.sparkfun.com/products/10646"> Ribbon Cable - 6 wire (15ft)</a> (PRT-10646)</li>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul><h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED</h3>
<p></p>>NAME>VALUE<h3>Green SMD LED</h3>
<p>Used in manufacturing of various products at SparkFun</p>
<p><b>Packages:</b>
<ul><li><b>0603</b> - SMD 0603 package <a href="http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/9894312-LTST-C190GKT.aspx?CrossPart=HSMG-C190&IM=0">[Product Link]</li>
<li><b>LilyPad 1206</b> - SMD1206 LilyPad package <a href="http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=IN150NGHARVATEKCORPORATION2049943&IM=0">[Product Link]</li>
<li><b> 1206</b> - SMD1206 package <a href=http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/8315665-LTST-C150KGKT.aspx?IM=0">[Product Link]</li>
<li><b> 1206 Bottom Mount</b> -SMD 1206 Bottom Mount <a href=http://www.digikey.com/product-detail/en/lite-on-inc/LTST-C230KGKT/160-1456-1-ND/386854">[Product Link]</li>
<ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/821”>Pro Mini 328 -5V</a></li>
<li><a href=”https://www.sparkfun.com/products/12757”>RedBoard</a></li>
<li><a href=”https://www.sparkfun.com/products/13720”>MP3 Trigger</a></li>
<li><a href=”https://www.sparkfun.com/products/11076”>Makey Makey</a></li>
</ul></p><h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>VCC Voltage Supply</h3>>VALUE<h3>VCC Voltage Supply</h3>
<p>Positive voltage supply (traditionally for a BJT device, C=collector).</p>Generated from <b>Air_Quality_Sensor.sch</b><p>
by exp-lbrs.ulp>VALUE<b>GND</b>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.