10. Molding and casting¶
Assignment¶
Please note documentation is incomplete and will be updated ASAP
Group Assignment review the safety data sheets for each of your molding and casting materials, then make and compare test casts with each of them
- extra credit: try other molding and casting processes
Individual Assignment design a mold around the stock and tooling that you’ll be using mill it (rough cut + three-axis finish cut), and use it to cast parts
- extra credit: try other programming languages and development environments
Tools Used at 3DEXPERIENCE Lab at Dassault Systèmes¶
Tools¶
Software¶
Materials¶
Group Assignment¶
Review the safety data sheets for each of your molding and casting materials, then make and compare test casts with each of them¶
Creating the paths for Wax Block Cut
Adding correct bits It is necessary to use an upcut bit with wax, and then used a ballnose for design work.
Individual Assignment¶
Incomplete - I will update this section as my computer kept on crashing stopping me from using my time effectively.
Design a mold around the stock and tooling that you’ll be using mill it (rough cut + three-axis finish cut), and use it to cast parts¶
3D Design¶
SPACE HOLDER CAD MODEL
.