/*
  Modified by Anith Ghalley
  Fabacademy 2022
  Bhutan
*/

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 2(LED) and 3(Push Button) as an output and input respectivly.
  pinMode(2, OUTPUT);
  pinMode(3, INPUT);
}

// the loop function runs over and over again forever
void loop() {
  int buttonState = digitalRead(3); // Read push button
  if(buttonState == HIGH){
    digitalWrite(2, HIGH);   // turn the LED on (HIGH is the voltage level)
    delay(1000);                       // wait for a second
    digitalWrite(2, LOW);    // turn the LED off by making the voltage LOW
    delay(1000);                       // wait for a second
  }
}