; generated by PrusaSlicer 2.3.0+ on 2021-03-03 at 06:09:43 UTC

; 

; external perimeters extrusion width = 0.60mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z8 E60 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E5.00 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107 ; disable fan
;TYPE:Custom
G90 ; use absolute coordinates
M83 ; extruder relative mode
M204 S1250 T1250
M104 S240 ; set extruder temp
M140 S70 ; set bed temp
G28 ; home all
G1 Y0 Z1 F100 ; move print head up
M190 S70 ; wait for bed temp
M109 S240 ; wait for extruder temp
G92 E0
G1 E38 F1000; deretract filament
G92 E0
G1 X60 Z0 E9 ; intro line
G1 X100 E12.5 ; intro line
G92 E0
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
; Filament gcode
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.2
G1 E-6.00000 F2400.000 ; retract
G1 Z0.075 F10800.000 ; lift Z
G1 Z0.200 ; move to next layer (0)
;AFTER_LAYER_CHANGE
;0.2
G1 Z0.275 ; lift Z
G1 X110.727 Y96.026 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
M204 S1250 ; adjust acceleration
;TYPE:External perimeter
;WIDTH:0.42
G1 F1800.000
G1 X111.080 Y96.156 E0.01179 ; perimeter
G1 X111.209 Y96.230 E0.00465 ; perimeter
G1 X110.715 Y96.047 E0.01651 ; perimeter
G1 X109.950 Y95.806 E0.02513 ; perimeter
G1 X109.012 Y95.990 E0.02997 ; perimeter
G1 X108.687 Y96.091 E0.01069 ; perimeter
G1 X107.830 Y96.528 E0.03016 ; perimeter
G1 X107.234 Y96.752 E0.01996 ; perimeter
G1 X106.860 Y97.100 E0.01601 ; perimeter
G1 X106.021 Y97.758 E0.03344 ; perimeter
G1 X105.430 Y98.352 E0.02625 ; perimeter
G1 X105.965 Y97.673 E0.02709 ; perimeter
G1 X106.313 Y97.388 E0.01411 ; perimeter
G1 X106.446 Y97.229 E0.00651 ; perimeter
G1 X107.244 Y96.467 E0.03461 ; perimeter
G1 X107.601 Y96.273 E0.01271 ; perimeter
G1 X108.322 Y95.937 E0.02494 ; perimeter
G1 X109.424 Y95.471 E0.03754 ; perimeter
G1 X109.549 Y95.436 E0.00406 ; perimeter
G1 X109.960 Y95.375 E0.01302 ; perimeter
G1 X110.065 Y95.392 E0.00335 ; perimeter
G1 X110.279 Y95.527 E0.00792 ; perimeter
G1 X110.385 Y95.651 E0.00511 ; perimeter
G1 X110.592 Y95.794 E0.00789 ; perimeter
G1 X110.697 Y95.975 E0.00656 ; perimeter
G1 X110.731 Y96.402 F10800.000 ; move inwards before travel
G1 X109.891 Y95.601 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.106328
G1 F1800.000
G1 X109.496 Y95.675 E0.00212 ; infill
;WIDTH:0.0978686
G1 X109.451 Y95.689 E0.00022 ; infill
;LAYER_CHANGE
;Z:0.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.496 Y95.675 E-0.01248 ; wipe and retract
;WIPE_END
G1 E-2.38752 F2400.000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 Z0.400 ; move to next layer (1)
;AFTER_LAYER_CHANGE
;0.4
G1 Z0.475 ; lift Z
G1 X109.776 Y104.281 ; move to first perimeter (bridge) point
G1 Z0.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X110.026 Y104.950 E0.02983 ; perimeter (bridge)
G1 X109.943 Y104.813 E0.00669 ; perimeter (bridge)
G1 X109.794 Y104.338 E0.02078 ; perimeter (bridge)
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.026 Y104.950 E-0.17250 ; wipe and retract
G1 X109.943 Y104.813 E-0.04224 ; wipe and retract
G1 X109.794 Y104.338 E-0.13117 ; wipe and retract
;WIPE_END
G1 E-2.05408 F2400.000 ; retract
G1 Z0.475 F10800.000 ; lift Z
G1 X109.332 Y95.969 ; move to first perimeter point
G1 Z0.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F1800.000
G1 X109.944 Y95.954 E0.02837 ; perimeter
G1 X110.630 Y96.198 E0.03369 ; perimeter
G1 X111.047 Y96.483 E0.02341 ; perimeter
G1 X111.206 Y96.736 E0.01383 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1
G1 X111.319 Y96.916 E0.00890 ; perimeter (bridge)
G1 X111.298 Y97.022 E0.00450 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.207 Y97.492 E0.02221 ; perimeter
G1 X111.059 Y97.712 E0.01226 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1
G1 X108.980 Y101.008 E0.16287 ; perimeter (bridge)
G1 X108.812 Y101.114 E0.00831 ; perimeter (bridge)
G1 X108.186 Y101.617 E0.03354 ; perimeter (bridge)
G1 X107.442 Y101.870 E0.03285 ; perimeter (bridge)
G1 X106.476 Y102.244 E0.04332 ; perimeter (bridge)
G1 X106.222 Y102.295 E0.01080 ; perimeter (bridge)
G1 X104.967 Y102.726 E0.05545 ; perimeter (bridge)
G1 X104.319 Y102.875 E0.02779 ; perimeter (bridge)
G1 X104.095 Y102.780 E0.01018 ; perimeter (bridge)
G1 X103.825 Y102.553 E0.01474 ; perimeter (bridge)
G1 X103.694 Y102.323 E0.01108 ; perimeter (bridge)
G1 X103.682 Y101.392 E0.03889 ; perimeter (bridge)
G1 X103.766 Y100.890 E0.02128 ; perimeter (bridge)
G1 X103.782 Y100.605 E0.01195 ; perimeter (bridge)
G1 X104.241 Y99.965 E0.03290 ; perimeter (bridge)
G1 X104.678 Y99.517 E0.02615 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.417 Y98.669 E0.05212 ; perimeter
G1 X105.972 Y98.087 E0.03725 ; perimeter
G1 X107.017 Y97.137 E0.06543 ; perimeter
G1 X107.690 Y96.682 E0.03761 ; perimeter
G1 X108.344 Y96.421 E0.03264 ; perimeter
G1 X109.277 Y95.994 E0.04753 ; perimeter
G1 X109.477 Y95.596 F10800.000 ; move inwards before travel
G1 X108.556 Y95.724 ; move to first perimeter point
G1 F2400.000
G1 X109.784 Y95.154 E0.06270 ; perimeter
G1 X110.235 Y95.037 E0.02158 ; perimeter
G1 X110.295 Y95.052 E0.00287 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X110.371 Y95.075 E0.00331 ; perimeter (bridge)
G1 X110.407 Y95.124 E0.00256 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X110.402 Y95.232 E0.00504 ; perimeter
G1 X110.762 Y95.662 E0.02595 ; perimeter
G1 X110.973 Y95.809 E0.01191 ; perimeter
G1 X110.958 Y95.874 E0.00306 ; perimeter
G1 X111.873 Y96.311 E0.04700 ; perimeter
G1 X111.903 Y96.310 E0.00140 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X112.114 Y96.301 E0.00880 ; perimeter (bridge)
G1 X112.630 Y96.348 E0.02167 ; perimeter (bridge)
G1 X112.606 Y96.396 E0.00224 ; perimeter (bridge)
G1 X112.115 Y96.883 E0.02890 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X112.009 Y96.987 E0.00688 ; perimeter
G1 X111.370 Y97.860 E0.05009 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X110.390 Y99.275 E0.07198 ; perimeter (bridge)
G1 X109.258 Y100.805 E0.07952 ; perimeter (bridge)
G1 X109.042 Y101.377 E0.02557 ; perimeter (bridge)
G1 X108.947 Y101.519 E0.00713 ; perimeter (bridge)
G1 X109.013 Y102.133 E0.02583 ; perimeter (bridge)
G1 X109.292 Y102.979 E0.03725 ; perimeter (bridge)
G1 X109.179 Y102.765 E0.01014 ; perimeter (bridge)
G1 X109.100 Y102.398 E0.01567 ; perimeter (bridge)
G1 X108.914 Y102.232 E0.01043 ; perimeter (bridge)
G1 X108.730 Y101.947 E0.01418 ; perimeter (bridge)
G1 X108.474 Y101.899 E0.01092 ; perimeter (bridge)
G1 X107.842 Y101.900 E0.02639 ; perimeter (bridge)
G1 X106.836 Y102.241 E0.04442 ; perimeter (bridge)
G1 X106.397 Y102.329 E0.01872 ; perimeter (bridge)
G1 X106.127 Y102.490 E0.01313 ; perimeter (bridge)
G1 X105.898 Y102.592 E0.01049 ; perimeter (bridge)
G1 X105.593 Y102.677 E0.01323 ; perimeter (bridge)
G1 X104.776 Y103.009 E0.03685 ; perimeter (bridge)
G1 X104.663 Y103.031 E0.00480 ; perimeter (bridge)
G1 X104.087 Y103.261 E0.02591 ; perimeter (bridge)
G1 X103.880 Y103.298 E0.00881 ; perimeter (bridge)
G1 X103.206 Y103.746 E0.03382 ; perimeter (bridge)
G1 X102.502 Y104.304 E0.03753 ; perimeter (bridge)
G1 X101.810 Y104.794 E0.03548 ; perimeter (bridge)
G1 X100.409 Y105.943 E0.07569 ; perimeter (bridge)
G1 X99.906 Y106.279 E0.02532 ; perimeter (bridge)
G1 X99.289 Y106.965 E0.03857 ; perimeter (bridge)
G1 X99.182 Y107.177 E0.00990 ; perimeter (bridge)
G1 X99.097 Y107.271 E0.00530 ; perimeter (bridge)
G1 X98.259 Y108.462 E0.06087 ; perimeter (bridge)
G1 X98.147 Y109.176 E0.03021 ; perimeter (bridge)
G1 X98.056 Y110.293 E0.04683 ; perimeter (bridge)
G1 X98.223 Y110.485 E0.01064 ; perimeter (bridge)
G1 X98.355 Y110.768 E0.01303 ; perimeter (bridge)
G1 X99.256 Y111.073 E0.03976 ; perimeter (bridge)
G1 X99.693 Y111.152 E0.01858 ; perimeter (bridge)
G1 X100.298 Y111.328 E0.02633 ; perimeter (bridge)
G1 X100.692 Y111.394 E0.01670 ; perimeter (bridge)
G1 X101.793 Y111.651 E0.04727 ; perimeter (bridge)
G1 X101.937 Y111.717 E0.00659 ; perimeter (bridge)
G1 X102.345 Y111.774 E0.01724 ; perimeter (bridge)
G1 X102.750 Y111.896 E0.01768 ; perimeter (bridge)
G1 X103.105 Y111.935 E0.01494 ; perimeter (bridge)
G1 X103.449 Y112.038 E0.01499 ; perimeter (bridge)
G1 X104.273 Y112.026 E0.03446 ; perimeter (bridge)
G1 X104.887 Y111.627 E0.03060 ; perimeter (bridge)
G1 X105.680 Y110.966 E0.04315 ; perimeter (bridge)
G1 X106.179 Y110.609 E0.02566 ; perimeter (bridge)
G1 X106.309 Y110.480 E0.00762 ; perimeter (bridge)
G1 X108.635 Y108.536 E0.12671 ; perimeter (bridge)
G1 X108.781 Y108.438 E0.00736 ; perimeter (bridge)
G1 X109.063 Y108.188 E0.01573 ; perimeter (bridge)
G1 X109.392 Y107.948 E0.01703 ; perimeter (bridge)
G1 X109.795 Y107.582 E0.02274 ; perimeter (bridge)
G1 X109.958 Y107.481 E0.00802 ; perimeter (bridge)
G1 X110.482 Y106.742 E0.03786 ; perimeter (bridge)
G1 X110.487 Y106.353 E0.01628 ; perimeter (bridge)
G1 X110.635 Y106.501 E0.00875 ; perimeter (bridge)
G1 X111.077 Y107.151 E0.03285 ; perimeter (bridge)
G1 X111.202 Y107.254 E0.00680 ; perimeter (bridge)
G1 X110.825 Y107.167 E0.01620 ; perimeter (bridge)
G1 X110.067 Y107.572 E0.03593 ; perimeter (bridge)
G1 X109.689 Y107.871 E0.02010 ; perimeter (bridge)
G1 X109.249 Y108.184 E0.02258 ; perimeter (bridge)
G1 X108.754 Y108.654 E0.02852 ; perimeter (bridge)
G1 X107.827 Y109.406 E0.04991 ; perimeter (bridge)
G1 X107.274 Y109.888 E0.03067 ; perimeter (bridge)
G1 X106.926 Y110.167 E0.01862 ; perimeter (bridge)
G1 X106.836 Y110.189 E0.00387 ; perimeter (bridge)
G1 X105.571 Y111.312 E0.07070 ; perimeter (bridge)
G1 X104.994 Y111.875 E0.03371 ; perimeter (bridge)
G1 X104.930 Y112.630 E0.03166 ; perimeter (bridge)
G1 X105.246 Y112.951 E0.01881 ; perimeter (bridge)
G1 X104.735 Y112.616 E0.02553 ; perimeter (bridge)
G1 X104.448 Y112.362 E0.01602 ; perimeter (bridge)
G1 X103.882 Y112.275 E0.02393 ; perimeter (bridge)
G1 X103.008 Y112.040 E0.03782 ; perimeter (bridge)
G1 X102.749 Y111.997 E0.01098 ; perimeter (bridge)
G1 X102.572 Y111.892 E0.00857 ; perimeter (bridge)
G1 X101.180 Y111.646 E0.05910 ; perimeter (bridge)
G1 X100.797 Y111.533 E0.01669 ; perimeter (bridge)
G1 X100.114 Y111.420 E0.02893 ; perimeter (bridge)
G1 X99.624 Y111.307 E0.02103 ; perimeter (bridge)
G1 X99.548 Y111.239 E0.00427 ; perimeter (bridge)
G1 X98.976 Y111.174 E0.02403 ; perimeter (bridge)
G1 X98.696 Y111.118 E0.01193 ; perimeter (bridge)
G1 X98.185 Y110.974 E0.02219 ; perimeter (bridge)
G1 X97.521 Y111.226 E0.02968 ; perimeter (bridge)
G1 X97.039 Y111.542 E0.02409 ; perimeter (bridge)
G1 X97.463 Y111.094 E0.02578 ; perimeter (bridge)
G1 X97.584 Y110.932 E0.00842 ; perimeter (bridge)
G1 X97.835 Y110.267 E0.02972 ; perimeter (bridge)
G1 X97.880 Y110.117 E0.00657 ; perimeter (bridge)
G1 X97.895 Y109.878 E0.00998 ; perimeter (bridge)
G1 X98.000 Y109.253 E0.02648 ; perimeter (bridge)
G1 X98.001 Y108.969 E0.01187 ; perimeter (bridge)
G1 X98.112 Y108.313 E0.02783 ; perimeter (bridge)
G1 X98.688 Y107.568 E0.03934 ; perimeter (bridge)
G1 X98.805 Y107.382 E0.00919 ; perimeter (bridge)
G1 X99.200 Y106.921 E0.02536 ; perimeter (bridge)
G1 X99.361 Y106.593 E0.01529 ; perimeter (bridge)
G1 X99.493 Y106.408 E0.00950 ; perimeter (bridge)
G1 X100.437 Y105.656 E0.05042 ; perimeter (bridge)
G1 X100.868 Y105.336 E0.02244 ; perimeter (bridge)
G1 X101.660 Y104.679 E0.04302 ; perimeter (bridge)
G1 X102.436 Y104.093 E0.04063 ; perimeter (bridge)
G1 X103.055 Y103.538 E0.03476 ; perimeter (bridge)
G1 X103.381 Y103.110 E0.02248 ; perimeter (bridge)
G1 X103.407 Y102.476 E0.02650 ; perimeter (bridge)
G1 X103.352 Y101.829 E0.02713 ; perimeter (bridge)
G1 X103.210 Y101.378 E0.01977 ; perimeter (bridge)
G1 X102.907 Y101.264 E0.01352 ; perimeter (bridge)
G1 X102.650 Y101.222 E0.01089 ; perimeter (bridge)
G1 X102.394 Y101.304 E0.01124 ; perimeter (bridge)
G1 X101.647 Y101.666 E0.03472 ; perimeter (bridge)
G1 X101.304 Y101.765 E0.01489 ; perimeter (bridge)
G1 X101.317 Y101.741 E0.00115 ; perimeter (bridge)
G1 X101.650 Y101.366 E0.02095 ; perimeter (bridge)
G1 X102.049 Y101.160 E0.01877 ; perimeter (bridge)
G1 X102.431 Y100.909 E0.01910 ; perimeter (bridge)
G1 X102.607 Y100.819 E0.00828 ; perimeter (bridge)
G1 X103.406 Y100.325 E0.03925 ; perimeter (bridge)
G1 X103.816 Y99.932 E0.02376 ; perimeter (bridge)
G1 X104.286 Y99.375 E0.03042 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X104.709 Y98.873 E0.03042 ; perimeter
G1 X104.841 Y98.620 E0.01324 ; perimeter
G1 X104.995 Y98.243 E0.01888 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X105.209 Y97.901 E0.01685 ; perimeter (bridge)
G1 X105.306 Y97.848 E0.00463 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X105.777 Y97.595 E0.02476 ; perimeter
G1 X106.218 Y97.231 E0.02646 ; perimeter
G1 X107.000 Y96.487 E0.05002 ; perimeter
G1 X107.180 Y96.359 E0.01023 ; perimeter
G1 X107.578 Y96.149 E0.02083 ; perimeter
G1 X108.501 Y95.748 E0.04663 ; perimeter
G1 X108.883 Y95.955 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.784 Y95.154 E-0.37301 ; wipe and retract
G1 X110.235 Y95.037 E-0.12297 ; wipe and retract
G1 X110.295 Y95.052 E-0.01634 ; wipe and retract
;WIPE_END
G1 E-1.88768 F2400.000 ; retract
G1 Z0.475 F10800.000 ; lift Z
G1 X107.170 Y114.473 ; move to first perimeter (bridge) point
G1 Z0.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X107.428 Y114.598 E0.01197 ; perimeter (bridge)
G1 X107.579 Y114.605 E0.00633 ; perimeter (bridge)
G1 X107.709 Y114.649 E0.00575 ; perimeter (bridge)
G1 X107.452 Y114.717 E0.01112 ; perimeter (bridge)
G1 X107.329 Y114.723 E0.00514 ; perimeter (bridge)
G1 X107.067 Y114.695 E0.01100 ; perimeter (bridge)
G1 X106.894 Y114.599 E0.00827 ; perimeter (bridge)
G1 X106.968 Y114.542 E0.00392 ; perimeter (bridge)
G1 X106.964 Y114.522 E0.00087 ; perimeter (bridge)
G1 X107.112 Y114.487 E0.00635 ; perimeter (bridge)
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.428 Y114.598 E-0.08839 ; wipe and retract
G1 X107.579 Y114.605 E-0.03994 ; wipe and retract
G1 X107.709 Y114.649 E-0.03631 ; wipe and retract
G1 X107.452 Y114.717 E-0.07024 ; wipe and retract
G1 X107.329 Y114.723 E-0.03245 ; wipe and retract
G1 X107.067 Y114.695 E-0.06946 ; wipe and retract
G1 X106.894 Y114.599 E-0.05222 ; wipe and retract
G1 X106.968 Y114.542 E-0.02478 ; wipe and retract
G1 X106.964 Y114.522 E-0.00549 ; wipe and retract
G1 X107.112 Y114.487 E-0.04010 ; wipe and retract
;WIPE_END
G1 E-1.94061 F2400.000 ; retract
G1 Z0.475 F10800.000 ; lift Z
G1 X103.620 Y103.155 ; move to first infill point
G1 Z0.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.280485
;HEIGHT:0.2
G1 F2400.000
G1 X103.747 Y102.958 E0.00463 ; infill
G1 X103.984 Y103.009 E0.00478 ; infill
G1 X103.441 Y101.243 F10800.000 ; move to first infill point
;WIDTH:0.111709
G1 F2400.000
G1 X103.437 Y101.184 E0.00034 ; infill
;WIDTH:0.15179
G1 X103.273 Y100.691 E0.00471 ; infill
G1 X103.524 Y100.878 F10800.000 ; move to first infill point
;WIDTH:0.203537
G1 F2400.000
G1 X102.799 Y100.984 E0.00979 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.524 Y100.878 E-0.19334 ; wipe and retract
;WIPE_END
G1 E-2.20666 F2400.000 ; retract
G1 Z0.475 F10800.000 ; lift Z
G1 X105.139 Y98.586 ; move to first infill point
G1 Z0.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.1304
G1 F2400.000
G1 X105.207 Y98.476 E0.00094 ; infill
;WIDTH:0.141492
G1 X105.445 Y98.153 E0.00329 ; infill
G1 X105.805 Y97.879 E0.00371 ; infill
G1 X107.098 Y96.761 F10800.000 ; move to first infill point
;WIDTH:0.113694
G1 F2400.000
G1 X107.478 Y96.503 E0.00271 ; infill
G1 X107.666 Y96.404 F10800.000 ; move to first infill point
;WIDTH:0.0972446
G1 F2400.000
G1 X107.694 Y96.391 E0.00014 ; infill
;WIDTH:0.112654
G1 X109.276 Y95.694 E0.01002 ; infill
G1 X109.344 Y95.624 F10800.000 ; move to first infill point
;WIDTH:0.396889
G1 F2400.000
G1 X109.979 Y95.535 E0.01887 ; infill
;WIDTH:0.425086
G1 X110.047 Y95.532 E0.00217 ; infill
;WIDTH:0.443913
G1 X110.350 Y95.545 E0.01012 ; infill
;LAYER_CHANGE
;Z:0.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.047 Y95.532 E-0.08008 ; wipe and retract
;WIPE_END
G1 E-2.31992 F2400.000 ; retract
G1 Z0.475 F10800.000 ; lift Z
G1 Z0.600 ; move to next layer (2)
;AFTER_LAYER_CHANGE
;0.6
G1 Z0.675 ; lift Z
G1 X104.015 Y102.986 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.833 Y103.057 E0.00662 ; perimeter
G1 X103.657 Y103.155 E0.00682 ; perimeter
G1 X103.663 Y102.897 E0.00873 ; perimeter
G1 X103.696 Y102.740 E0.00544 ; perimeter
G1 X103.880 Y102.938 E0.00914 ; perimeter
G1 X103.959 Y102.966 E0.00284 ; perimeter
G1 X103.369 Y101.351 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.191 Y101.027 E0.01250 ; perimeter
G1 X102.775 Y101.043 E0.01412 ; perimeter
G1 X103.446 Y100.641 E0.02649 ; perimeter
G1 X103.375 Y101.291 E0.02215 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.191 Y101.027 E-0.08498 ; wipe and retract
G1 X102.775 Y101.043 E-0.11006 ; wipe and retract
G1 X103.446 Y100.641 E-0.20652 ; wipe and retract
G1 X103.375 Y101.291 E-0.17265 ; wipe and retract
;WIPE_END
G1 E-1.82580 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X105.198 Y98.387 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.272 Y98.156 E0.00821 ; perimeter
G1 X105.490 Y98.072 E0.00790 ; perimeter
G1 X105.238 Y98.342 E0.01251 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.272 Y98.156 E-0.04994 ; wipe and retract
G1 X105.490 Y98.072 E-0.06159 ; wipe and retract
G1 X105.238 Y98.342 E-0.09756 ; wipe and retract
;WIPE_END
G1 E-2.19091 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X110.987 Y97.623 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.798 Y97.837 E0.01320 ; perimeter
G1 X109.573 Y99.727 E0.10435 ; perimeter
G1 X109.190 Y100.280 E0.03115 ; perimeter
G1 X108.897 Y100.751 E0.02568 ; perimeter
G1 X108.785 Y100.878 E0.00785 ; perimeter
G1 X108.670 Y101.063 E0.01010 ; perimeter
G1 X108.173 Y101.378 E0.02727 ; perimeter
G1 X106.486 Y101.978 E0.08294 ; perimeter
G1 X105.500 Y102.352 E0.04883 ; perimeter
G1 X104.968 Y102.514 E0.02580 ; perimeter
G1 X104.442 Y102.625 E0.02488 ; perimeter
G1 X104.153 Y102.523 E0.01422 ; perimeter
G1 X103.998 Y102.356 E0.01056 ; perimeter
G1 X103.868 Y102.056 E0.01513 ; perimeter
G1 X103.851 Y101.378 E0.03142 ; perimeter
G1 X103.924 Y100.708 E0.03120 ; perimeter
G1 X104.158 Y100.284 E0.02247 ; perimeter
G1 X105.687 Y98.562 E0.10663 ; perimeter
G1 X106.230 Y97.998 E0.03629 ; perimeter
G1 X107.202 Y97.083 E0.06185 ; perimeter
G1 X107.623 Y96.801 E0.02345 ; perimeter
G1 X108.749 Y96.339 E0.05638 ; perimeter
G1 X109.064 Y96.191 E0.01612 ; perimeter
G1 X109.341 Y96.112 E0.01334 ; perimeter
G1 X109.542 Y96.026 E0.01013 ; perimeter
G1 X110.122 Y96.077 E0.02697 ; perimeter
G1 X110.317 Y96.158 E0.00977 ; perimeter
G1 X110.844 Y96.467 E0.02831 ; perimeter
G1 X111.055 Y96.800 E0.01826 ; perimeter
G1 X111.118 Y97.253 E0.02121 ; perimeter
G1 X111.031 Y97.400 E0.00791 ; perimeter
G1 X110.999 Y97.564 E0.00775 ; perimeter
G1 X111.111 Y97.880 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.798 Y97.837 E-0.08922 ; wipe and retract
G1 X109.573 Y99.727 E-0.59449 ; wipe and retract
G1 X109.190 Y100.280 E-0.17746 ; wipe and retract
G1 X108.897 Y100.751 E-0.14630 ; wipe and retract
G1 X108.785 Y100.878 E-0.04474 ; wipe and retract
G1 X108.670 Y101.063 E-0.05752 ; wipe and retract
G1 X108.173 Y101.378 E-0.15537 ; wipe and retract
G1 X106.486 Y101.978 E-0.47247 ; wipe and retract
G1 X105.500 Y102.352 E-0.27815 ; wipe and retract
G1 X104.968 Y102.514 E-0.14698 ; wipe and retract
G1 X104.533 Y102.606 E-0.11729 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X110.372 Y95.659 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.239 Y95.603 E0.00491 ; perimeter
G1 X109.826 Y95.567 E0.01402 ; perimeter
G1 X110.183 Y95.337 E0.01439 ; perimeter
G1 X110.179 Y95.413 E0.00257 ; perimeter
G1 X110.341 Y95.609 E0.00859 ; perimeter
G1 X111.431 Y96.492 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X111.766 Y96.668 E0.01282 ; perimeter
G1 X111.875 Y96.663 E0.00367 ; perimeter
G1 X111.569 Y96.994 E0.01524 ; perimeter
G1 X111.519 Y96.630 E0.01243 ; perimeter
G1 X111.463 Y96.542 E0.00351 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.766 Y96.668 E-0.08658 ; wipe and retract
G1 X111.875 Y96.663 E-0.02860 ; wipe and retract
G1 X111.569 Y96.994 E-0.11880 ; wipe and retract
G1 X111.519 Y96.630 E-0.09688 ; wipe and retract
G1 X111.463 Y96.542 E-0.02740 ; wipe and retract
;WIPE_END
G1 E-2.04174 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X108.728 Y101.597 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.717 Y101.729 E0.00449 ; perimeter
G1 X108.660 Y101.676 E0.00265 ; perimeter
G1 X108.614 Y101.669 E0.00158 ; perimeter
G1 X108.677 Y101.629 E0.00254 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.717 Y101.729 E-0.02842 ; wipe and retract
G1 X108.660 Y101.676 E-0.02065 ; wipe and retract
G1 X108.614 Y101.669 E-0.01234 ; wipe and retract
G1 X108.677 Y101.629 E-0.01981 ; wipe and retract
;WIPE_END
G1 E-2.31879 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X98.466 Y110.596 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.321 Y110.054 E0.02598 ; perimeter
G1 X98.322 Y109.382 E0.03115 ; perimeter
G1 X98.478 Y108.432 E0.04458 ; perimeter
G1 X99.457 Y107.140 E0.07505 ; perimeter
G1 X99.889 Y106.622 E0.03126 ; perimeter
G1 X101.105 Y105.635 E0.07255 ; perimeter
G1 X101.391 Y105.378 E0.01783 ; perimeter
G1 X102.388 Y104.644 E0.05730 ; perimeter
G1 X103.005 Y104.137 E0.03704 ; perimeter
G1 X103.513 Y103.786 E0.02860 ; perimeter
G1 X104.040 Y103.494 E0.02788 ; perimeter
G1 X104.174 Y103.441 E0.00669 ; perimeter
G1 X105.872 Y102.819 E0.08376 ; perimeter
G1 X106.223 Y102.666 E0.01775 ; perimeter
G1 X106.465 Y102.609 E0.01150 ; perimeter
G1 X107.248 Y102.337 E0.03840 ; perimeter
G1 X107.250 Y102.293 E0.00202 ; perimeter
G1 X107.889 Y102.112 E0.03077 ; perimeter
G1 X108.139 Y102.091 E0.01162 ; perimeter
G1 X108.443 Y102.133 E0.01420 ; perimeter
G1 X108.806 Y102.473 E0.02308 ; perimeter
G1 X109.411 Y104.073 E0.07920 ; perimeter
G1 X110.050 Y105.841 E0.08710 ; perimeter
G1 X110.226 Y106.425 E0.02824 ; perimeter
G1 X110.265 Y106.616 E0.00902 ; perimeter
G1 X110.170 Y106.825 E0.01063 ; perimeter
G1 X109.929 Y107.178 E0.01979 ; perimeter
G1 X109.574 Y107.522 E0.02292 ; perimeter
G1 X109.149 Y107.852 E0.02492 ; perimeter
G1 X107.494 Y109.238 E0.09999 ; perimeter
G1 X105.163 Y111.142 E0.13942 ; perimeter
G1 X104.710 Y111.542 E0.02798 ; perimeter
G1 X104.307 Y111.810 E0.02245 ; perimeter
G1 X103.814 Y111.850 E0.02289 ; perimeter
G1 X103.546 Y111.821 E0.01248 ; perimeter
G1 X103.131 Y111.710 E0.01992 ; perimeter
G1 X102.859 Y111.666 E0.01276 ; perimeter
G1 X100.907 Y111.219 E0.09275 ; perimeter
G1 X100.312 Y111.112 E0.02800 ; perimeter
G1 X99.068 Y110.788 E0.05954 ; perimeter
G1 X98.524 Y110.614 E0.02649 ; perimeter
G1 X98.068 Y110.630 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.321 Y110.054 E-0.15715 ; wipe and retract
G1 X98.322 Y109.382 E-0.17746 ; wipe and retract
G1 X98.478 Y108.432 E-0.25398 ; wipe and retract
G1 X99.457 Y107.140 E-0.42758 ; wipe and retract
G1 X99.889 Y106.622 E-0.17809 ; wipe and retract
G1 X101.105 Y105.635 E-0.41331 ; wipe and retract
G1 X101.391 Y105.378 E-0.10158 ; wipe and retract
G1 X102.388 Y104.644 E-0.32645 ; wipe and retract
G1 X103.005 Y104.137 E-0.21100 ; wipe and retract
G1 X103.109 Y104.065 E-0.03338 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X114.196 Y109.347 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.137 Y109.063 E0.00982 ; perimeter
G1 X114.293 Y109.015 E0.00552 ; perimeter
G1 X114.228 Y109.297 E0.00978 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.137 Y109.063 E-0.06613 ; wipe and retract
G1 X114.293 Y109.015 E-0.04306 ; wipe and retract
G1 X114.228 Y109.297 E-0.07623 ; wipe and retract
;WIPE_END
G1 E-2.21458 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X105.148 Y112.443 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.248 Y111.936 E0.02392 ; perimeter
G1 X105.697 Y111.452 E0.03059 ; perimeter
G1 X107.631 Y109.838 E0.11666 ; perimeter
G1 X108.002 Y109.555 E0.02163 ; perimeter
G1 X108.285 Y109.288 E0.01803 ; perimeter
G1 X110.275 Y107.667 E0.11892 ; perimeter
G1 X110.429 Y107.627 E0.00736 ; perimeter
G1 X110.757 Y107.463 E0.01699 ; perimeter
G1 X111.221 Y107.609 E0.02254 ; perimeter
G1 X111.537 Y107.746 E0.01595 ; perimeter
G1 X113.158 Y108.826 E0.09022 ; perimeter
G1 X113.659 Y109.132 E0.02719 ; perimeter
G1 X113.727 Y109.458 E0.01542 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1
G1 X113.762 Y109.625 E0.00715 ; perimeter (bridge)
G1 X113.685 Y109.773 E0.00696 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.606 Y109.923 E0.00784 ; perimeter
G1 X113.140 Y110.397 E0.03081 ; perimeter
G1 X112.413 Y111.011 E0.04406 ; perimeter
G1 X111.912 Y111.392 E0.02916 ; perimeter
G1 X111.785 Y111.532 E0.00876 ; perimeter
G1 X111.315 Y111.923 E0.02831 ; perimeter
G1 X110.936 Y112.203 E0.02185 ; perimeter
G1 X110.579 Y112.539 E0.02269 ; perimeter
G1 X110.211 Y112.795 E0.02075 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1
G1 X109.630 Y113.296 E0.03207 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.299 Y113.585 E0.02037 ; perimeter
G1 X108.555 Y114.149 E0.04324 ; perimeter
G1 X108.152 Y114.326 E0.02039 ; perimeter
G1 X107.826 Y114.253 E0.01546 ; perimeter
G1 X107.634 Y114.267 E0.00894 ; perimeter
G1 X107.237 Y114.041 E0.02113 ; perimeter
G1 X107.138 Y113.966 E0.00577 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1
G1 X107.023 Y113.878 E0.00604 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.863 Y113.757 E0.00930 ; perimeter
G1 X106.503 Y113.536 E0.01959 ; perimeter
G1 X106.123 Y113.242 E0.02225 ; perimeter
G1 X105.726 Y113.004 E0.02143 ; perimeter
G1 X105.191 Y112.485 E0.03454 ; perimeter
G1 X104.773 Y112.302 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.248 Y111.936 E-0.14550 ; wipe and retract
G1 X105.697 Y111.452 E-0.17427 ; wipe and retract
G1 X107.631 Y109.838 E-0.66459 ; wipe and retract
G1 X108.002 Y109.555 E-0.12321 ; wipe and retract
G1 X108.285 Y109.288 E-0.10274 ; wipe and retract
G1 X110.275 Y107.667 E-0.67746 ; wipe and retract
G1 X110.429 Y107.627 E-0.04191 ; wipe and retract
G1 X110.757 Y107.463 E-0.09680 ; wipe and retract
G1 X111.221 Y107.609 E-0.12841 ; wipe and retract
G1 X111.537 Y107.746 E-0.09086 ; wipe and retract
G1 X111.645 Y107.818 E-0.03425 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X107.333 Y114.651 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X106.654 Y114.692 E0.02304 ; perimeter
G1 X106.619 Y114.177 E0.01746 ; perimeter
G1 X106.971 Y114.444 E0.01495 ; perimeter
G1 X107.281 Y114.621 E0.01210 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.654 Y114.692 E-0.16659 ; wipe and retract
G1 X106.619 Y114.177 E-0.13614 ; wipe and retract
G1 X106.971 Y114.444 E-0.11657 ; wipe and retract
G1 X107.281 Y114.621 E-0.09431 ; wipe and retract
;WIPE_END
G1 E-1.88638 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X104.722 Y112.113 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.677 Y112.337 E0.00774 ; perimeter
G1 X104.529 Y112.242 E0.00599 ; perimeter
G1 X104.672 Y112.146 E0.00583 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.677 Y112.337 E-0.05044 ; wipe and retract
G1 X104.529 Y112.242 E-0.04667 ; wipe and retract
G1 X104.672 Y112.146 E-0.04543 ; wipe and retract
;WIPE_END
G1 E-2.25745 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X98.027 Y110.818 ; move to first perimeter point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.014 Y110.818 E0.00043 ; perimeter
G1 X97.584 Y111.388 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X97.320 Y111.628 E0.01656 ; perimeter
G1 X96.030 Y112.586 E0.07442 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X95.426 Y113.033 E0.03141 ; perimeter (bridge)
G1 X95.363 Y113.175 E0.00647 ; perimeter (bridge)
G1 X94.966 Y113.490 E0.02119 ; perimeter (bridge)
G1 X94.958 Y113.624 E0.00564 ; perimeter (bridge)
G1 X94.852 Y113.518 E0.00626 ; perimeter (bridge)
G1 X94.816 Y113.406 E0.00494 ; perimeter (bridge)
G1 X94.886 Y113.294 E0.00552 ; perimeter (bridge)
G1 X95.175 Y112.949 E0.01883 ; perimeter (bridge)
G1 X96.314 Y111.854 E0.06603 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X96.785 Y111.411 E0.02994 ; perimeter
G1 X97.210 Y111.048 E0.02591 ; perimeter
G1 X97.558 Y110.626 E0.02529 ; perimeter
G1 X97.691 Y109.847 E0.03661 ; perimeter
G1 X97.761 Y109.108 E0.03438 ; perimeter
G1 X97.633 Y108.890 E0.01171 ; perimeter
G1 X97.581 Y108.714 E0.00849 ; perimeter
G1 X97.590 Y108.509 E0.00952 ; perimeter
G1 X97.785 Y108.216 E0.01628 ; perimeter
G1 X98.214 Y107.821 E0.02700 ; perimeter
G1 X98.809 Y107.105 E0.04316 ; perimeter
G1 X99.085 Y106.592 E0.02698 ; perimeter
G1 X99.098 Y106.351 E0.01118 ; perimeter
G1 X99.131 Y106.286 E0.00335 ; perimeter
G1 X99.352 Y106.069 E0.01434 ; perimeter
G1 X99.453 Y106.045 E0.00483 ; perimeter
G1 X100.034 Y105.725 E0.03071 ; perimeter
G1 X101.478 Y104.590 E0.08507 ; perimeter
G1 X101.840 Y104.336 E0.02047 ; perimeter
G1 X102.156 Y104.054 E0.01963 ; perimeter
G1 X102.779 Y103.554 E0.03700 ; perimeter
G1 X103.177 Y103.076 E0.02881 ; perimeter
G1 X103.182 Y102.841 E0.01090 ; perimeter
G1 X103.243 Y102.551 E0.01373 ; perimeter
G1 X103.175 Y102.000 E0.02571 ; perimeter
G1 X102.912 Y101.520 E0.02537 ; perimeter
G1 X102.342 Y101.542 E0.02640 ; perimeter
G1 X101.912 Y101.729 E0.02174 ; perimeter
G1 X101.018 Y102.257 E0.04809 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X100.856 Y102.341 E0.00763 ; perimeter (bridge)
G1 X100.727 Y102.383 E0.00566 ; perimeter (bridge)
G1 X100.729 Y102.287 E0.00401 ; perimeter (bridge)
G1 X100.802 Y102.128 E0.00730 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X100.919 Y101.933 E0.01057 ; perimeter
G1 X100.977 Y101.784 E0.00736 ; perimeter
G1 X101.153 Y101.514 E0.01494 ; perimeter
G1 X101.222 Y101.438 E0.00474 ; perimeter
G1 X101.543 Y101.184 E0.01897 ; perimeter
G1 X101.966 Y100.924 E0.02300 ; perimeter
G1 X102.696 Y100.539 E0.03821 ; perimeter
G1 X103.434 Y100.081 E0.04025 ; perimeter
G1 X103.812 Y99.700 E0.02488 ; perimeter
G1 X104.207 Y99.258 E0.02745 ; perimeter
G1 X104.422 Y98.958 E0.01712 ; perimeter
G1 X104.688 Y98.396 E0.02877 ; perimeter
G1 X104.841 Y97.923 E0.02306 ; perimeter
G1 X104.932 Y97.771 E0.00822 ; perimeter
G1 X105.644 Y97.495 E0.03537 ; perimeter
G1 X105.971 Y97.283 E0.01805 ; perimeter
G1 X106.768 Y96.526 E0.05089 ; perimeter
G1 X107.117 Y96.259 E0.02037 ; perimeter
G1 X109.471 Y95.205 E0.11946 ; perimeter
G1 X109.657 Y95.113 E0.00964 ; perimeter
G1 X109.798 Y94.997 E0.00844 ; perimeter
G1 X110.237 Y94.761 E0.02308 ; perimeter
G1 X110.439 Y94.716 E0.00959 ; perimeter
G1 X110.629 Y94.730 E0.00886 ; perimeter
G1 X110.691 Y94.885 E0.00776 ; perimeter
G1 X110.671 Y95.251 E0.01697 ; perimeter
G1 X110.779 Y95.382 E0.00783 ; perimeter
G1 X110.869 Y95.595 E0.01073 ; perimeter
G1 X111.147 Y95.803 E0.01608 ; perimeter
G1 X111.468 Y95.996 E0.01738 ; perimeter
G1 X111.595 Y96.033 E0.00610 ; perimeter
G1 X111.876 Y96.181 E0.01470 ; perimeter
G1 X112.159 Y96.169 E0.01314 ; perimeter
G1 X113.069 Y96.049 E0.04251 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X113.429 Y96.027 E0.01506 ; perimeter (bridge)
G1 X113.400 Y96.090 E0.00287 ; perimeter (bridge)
G1 X113.223 Y96.249 E0.00995 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X113.109 Y96.351 E0.00707 ; perimeter
G1 X112.332 Y96.883 E0.04364 ; perimeter
G1 X111.974 Y97.256 E0.02394 ; perimeter
G1 X111.856 Y97.416 E0.00922 ; perimeter
G1 X109.439 Y100.963 E0.19882 ; perimeter
G1 X109.225 Y101.435 E0.02403 ; perimeter
G1 X109.184 Y101.938 E0.02335 ; perimeter
G1 X109.382 Y102.458 E0.02578 ; perimeter
G1 X109.453 Y102.735 E0.01325 ; perimeter
G1 X109.674 Y103.283 E0.02736 ; perimeter
G1 X109.835 Y103.774 E0.02393 ; perimeter
G1 X109.980 Y104.084 E0.01585 ; perimeter
G1 X110.167 Y104.589 E0.02494 ; perimeter
G1 X110.197 Y104.745 E0.00736 ; perimeter
G1 X110.511 Y105.552 E0.04012 ; perimeter
G1 X110.622 Y105.899 E0.01688 ; perimeter
G1 X110.812 Y106.359 E0.02305 ; perimeter
G1 X111.069 Y106.784 E0.02300 ; perimeter
G1 X111.427 Y107.061 E0.02097 ; perimeter
G1 X111.482 Y107.144 E0.00464 ; perimeter
G1 X111.962 Y107.435 E0.02598 ; perimeter
G1 X113.107 Y108.257 E0.06531 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X113.827 Y108.654 E0.03435 ; perimeter (bridge)
G1 X114.289 Y108.512 E0.02021 ; perimeter (bridge)
G1 X114.477 Y108.491 E0.00791 ; perimeter (bridge)
G1 X114.826 Y108.091 E0.02220 ; perimeter (bridge)
G1 X114.834 Y108.660 E0.02378 ; perimeter (bridge)
G1 X114.810 Y108.895 E0.00988 ; perimeter (bridge)
G1 X114.694 Y109.462 E0.02420 ; perimeter (bridge)
G1 X114.609 Y109.596 E0.00662 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X114.570 Y109.657 E0.00336 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X114.490 Y109.784 E0.00626 ; perimeter (bridge)
G1 X114.418 Y109.841 E0.00384 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X112.286 Y111.625 E0.12877 ; perimeter
G1 X111.919 Y111.908 E0.02150 ; perimeter
G1 X111.424 Y112.339 E0.03035 ; perimeter
G1 X110.850 Y112.794 E0.03396 ; perimeter
G1 X110.509 Y113.108 E0.02147 ; perimeter
G1 X110.212 Y113.350 E0.01771 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X110.063 Y113.471 E0.00806 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X109.210 Y114.164 E0.05091 ; perimeter
G1 X108.661 Y114.634 E0.03343 ; perimeter
G1 X108.501 Y114.794 E0.01051 ; perimeter
G1 X108.190 Y115.007 E0.01743 ; perimeter
G1 X108.069 Y115.048 E0.00597 ; perimeter
G1 X107.749 Y115.100 E0.01501 ; perimeter
G1 X106.878 Y115.161 E0.04041 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
G1 F1800.000
G1 X105.713 Y115.231 E0.04878 ; perimeter (bridge)
G1 X102.747 Y115.283 E0.12398 ; perimeter (bridge)
G1 X102.041 Y115.253 E0.02954 ; perimeter (bridge)
G1 X103.454 Y115.147 E0.05923 ; perimeter (bridge)
G1 X104.408 Y115.016 E0.04022 ; perimeter (bridge)
G1 X105.486 Y114.911 E0.04528 ; perimeter (bridge)
G1 X106.164 Y114.587 E0.03141 ; perimeter (bridge)
G1 X106.129 Y114.076 E0.02140 ; perimeter (bridge)
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X106.127 Y114.036 E0.00188 ; perimeter
G1 X105.632 Y113.499 E0.03380 ; perimeter
G1 X105.337 Y113.334 E0.01563 ; perimeter
G1 X104.118 Y112.551 E0.06714 ; perimeter
G1 X103.192 Y112.315 E0.04425 ; perimeter
G1 X102.600 Y112.206 E0.02789 ; perimeter
G1 X101.472 Y111.950 E0.05360 ; perimeter
G1 X100.907 Y111.780 E0.02728 ; perimeter
G1 X100.401 Y111.693 E0.02381 ; perimeter
G1 X99.135 Y111.418 E0.05999 ; perimeter
G1 X98.270 Y111.263 E0.04070 ; perimeter
G1 X97.643 Y111.377 E0.02951 ; perimeter
G1 X97.282 Y111.197 F10800.000 ; move inwards before travel
G1 X98.302 Y110.912 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.209765
G1 F2400.000
G1 X98.982 Y111.080 E0.00972 ; infill
;WIDTH:0.107278
G1 X100.254 Y111.380 E0.00700 ; infill
G1 X100.972 Y111.514 E0.00391 ; infill
;WIDTH:0.12798
G1 X101.546 Y111.666 E0.00420 ; infill
G1 X103.497 Y112.101 E0.01414 ; infill
;WIDTH:0.173919
G1 X103.816 Y112.158 E0.00353 ; infill
;WIDTH:0.20741
G1 X103.917 Y112.166 E0.00139 ; infill
;WIDTH:0.240903
G1 X104.019 Y112.175 E0.00168 ; infill
G1 X104.865 Y112.633 F10800.000 ; move to first infill point
;WIDTH:0.1347
G1 F2400.000
G1 X105.405 Y113.063 E0.00527 ; infill
G1 X105.933 Y113.436 F10800.000 ; move to first infill point
;WIDTH:0.102881
G1 F2400.000
G1 X105.970 Y113.466 E0.00024 ; infill
;WIDTH:0.138497
G1 X106.162 Y113.642 E0.00207 ; infill
;WIDTH:0.174113
G1 X106.354 Y113.818 E0.00284 ; infill
G1 X106.423 Y114.844 F10800.000 ; move to first infill point
;WIDTH:0.214659
G1 F2400.000
G1 X106.287 Y114.879 E0.00200 ; infill
;WIDTH:0.175413
G1 X106.151 Y114.914 E0.00154 ; infill
;WIDTH:0.136166
G1 X106.015 Y114.949 E0.00109 ; infill
G1 X107.529 Y114.873 F10800.000 ; move to first infill point
;WIDTH:0.139882
G1 F2400.000
G1 X108.201 Y114.634 E0.00575 ; infill
G1 X108.433 Y114.490 E0.00221 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.201 Y114.634 E-0.07221 ; wipe and retract
G1 X107.529 Y114.873 E-0.18814 ; wipe and retract
;WIPE_END
G1 E-2.13965 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X105.056 Y111.668 ; move to first infill point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.106376
G1 F2400.000
G1 X105.500 Y111.240 E0.00326 ; infill
G1 X107.818 Y109.338 E0.01582 ; infill
G1 X108.105 Y109.082 E0.00203 ; infill
;WIDTH:0.114956
G1 X109.757 Y107.730 E0.01279 ; infill
;WIDTH:0.126731
G1 X110.104 Y107.423 E0.00323 ; infill
G1 X110.245 Y107.187 E0.00192 ; infill
G1 X110.909 Y107.117 F10800.000 ; move to first infill point
;WIDTH:0.0981852
G1 F2400.000
G1 X111.349 Y107.375 E0.00234 ; infill
G1 X111.357 Y107.359 F10800.000 ; move to first infill point
;WIDTH:0.218539
G1 F2400.000
G1 X111.017 Y107.181 E0.00560 ; infill
G1 X111.010 Y107.143 E0.00057 ; infill
;WIDTH:0.201481
G1 X111.004 Y107.107 E0.00049 ; infill
;WIDTH:0.152589
G1 X110.997 Y107.071 E0.00034 ; infill
;WIDTH:0.1037
G1 X110.967 Y107.037 E0.00023 ; infill
G1 X110.561 Y106.546 F10800.000 ; move to first infill point
;WIDTH:0.152842
G1 F2400.000
G1 X110.503 Y106.357 E0.00180 ; infill
;WIDTH:0.131125
G1 X110.378 Y106.006 E0.00273 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.503 Y106.357 E-0.09834 ; wipe and retract
;WIPE_END
G1 E-2.30166 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X112.577 Y96.357 ; move to first infill point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.134393
G1 F2400.000
G1 X112.354 Y96.546 E0.00223 ; infill
G1 X111.319 Y97.776 F10800.000 ; move to first infill point
;WIDTH:0.217333
G1 F2400.000
G1 X111.330 Y97.368 E0.00592 ; infill
G1 X111.398 Y97.523 F10800.000 ; move to first infill point
;WIDTH:0.160449
G1 F2400.000
G1 X111.253 Y97.772 E0.00282 ; infill
G1 X111.052 Y98.030 E0.00320 ; infill
G1 X109.816 Y99.889 E0.02182 ; infill
;WIDTH:0.145854
G1 X109.191 Y100.819 E0.00959 ; infill
;WIDTH:0.132748
G1 X109.043 Y101.066 E0.00215 ; infill
G1 X108.929 Y102.109 F10800.000 ; move to first infill point
;WIDTH:0.104498
G1 F2400.000
G1 X109.041 Y102.325 E0.00125 ; infill
G1 X109.151 Y102.632 E0.00167 ; infill
G1 X107.865 Y101.810 F10800.000 ; move to first infill point
;WIDTH:0.167754
G1 F2400.000
G1 X107.830 Y101.818 E0.00037 ; infill
;WIDTH:0.1596
G1 X107.420 Y101.949 E0.00418 ; infill
;WIDTH:0.131259
G1 X107.009 Y102.080 E0.00316 ; infill
G1 X106.962 Y102.123 E0.00047 ; infill
G1 X106.139 Y102.404 E0.00638 ; infill
;WIDTH:0.110514
G1 X105.593 Y102.620 E0.00330 ; infill
G1 X105.040 Y102.805 E0.00328 ; infill
;WIDTH:0.206103
G1 X104.592 Y102.934 E0.00632 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.040 Y102.805 E-0.12296 ; wipe and retract
;WIPE_END
G1 E-2.27704 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X103.737 Y100.118 ; move to first infill point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.129002
G1 F2400.000
G1 X103.768 Y100.128 E0.00023 ; infill
;WIDTH:0.172324
G1 X103.798 Y100.138 E0.00035 ; infill
;WIDTH:0.205026
G1 X103.841 Y100.154 E0.00062 ; infill
G1 X104.462 Y99.456 E0.01258 ; infill
;WIDTH:0.2511
G1 X104.725 Y99.125 E0.00732 ; infill
;WIDTH:0.292644
G1 X104.806 Y99.002 E0.00305 ; infill
;WIDTH:0.334238
G1 X104.887 Y98.879 E0.00357 ; infill
;WIDTH:0.382787
G1 X105.076 Y98.595 E0.00965 ; infill
G1 X105.587 Y97.782 F10800.000 ; move to first infill point
;WIDTH:0.263336
G1 F2400.000
G1 X105.820 Y97.852 E0.00446 ; infill
G1 X106.195 Y97.551 E0.00882 ; infill
G1 X106.990 Y96.801 E0.02002 ; infill
G1 X107.305 Y96.575 E0.00711 ; infill
G1 X107.448 Y96.495 E0.00299 ; infill
G1 X108.926 Y95.851 E0.02955 ; infill
G1 X109.444 Y95.645 E0.01022 ; infill
G1 X109.618 Y95.763 E0.00385 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.444 Y95.645 E-0.05549 ; wipe and retract
G1 X108.926 Y95.851 E-0.14713 ; wipe and retract
G1 X107.448 Y96.495 E-0.42553 ; wipe and retract
G1 X107.305 Y96.575 E-0.04308 ; wipe and retract
G1 X106.990 Y96.801 E-0.10243 ; wipe and retract
G1 X106.195 Y97.551 E-0.28826 ; wipe and retract
G1 X105.820 Y97.852 E-0.12695 ; wipe and retract
G1 X105.587 Y97.782 E-0.06424 ; wipe and retract
;WIPE_END
G1 E-1.14688 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 X101.283 Y101.775 ; move to first infill point
G1 Z0.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.162743
G1 F2400.000
G1 X101.428 Y101.659 E0.00185 ; infill
;WIDTH:0.190579
G1 X101.580 Y101.556 E0.00225 ; infill
;WIDTH:0.220234
G1 X101.768 Y101.432 E0.00333 ; infill
;WIDTH:0.249633
G1 X101.956 Y101.334 E0.00364 ; infill
;WIDTH:0.27903
G1 X102.144 Y101.237 E0.00415 ; infill
;WIDTH:0.286981
G1 X102.239 Y101.191 E0.00215 ; infill
;WIDTH:0.299245
G1 X102.535 Y101.082 E0.00673 ; infill
G1 X103.458 Y101.579 F10800.000 ; move to first infill point
;WIDTH:0.239508
G1 F2400.000
G1 X103.534 Y102.138 E0.00922 ; infill
G1 X103.411 Y103.392 F10800.000 ; move to first infill point
;WIDTH:0.280105
G1 F2400.000
G1 X103.273 Y103.518 E0.00367 ; infill
;WIDTH:0.244568
G1 X103.136 Y103.643 E0.00312 ; infill
;WIDTH:0.20903
G1 X102.999 Y103.769 E0.00257 ; infill
;WIDTH:0.173493
G1 X102.828 Y103.897 E0.00232 ; infill
;WIDTH:0.156952
G1 X102.020 Y104.559 E0.00990 ; infill
;WIDTH:0.133875
G1 X101.214 Y105.157 E0.00759 ; infill
;WIDTH:0.126733
G1 X100.204 Y105.973 E0.00905 ; infill
G1 X100.029 Y106.090 E0.00146 ; infill
;WIDTH:0.230037
G1 X99.573 Y106.407 E0.00865 ; infill
;WIDTH:0.339903
G1 X99.313 Y106.677 E0.00924 ; infill
G1 X99.655 Y106.209 F10800.000 ; move to first infill point
;WIDTH:0.231673
G1 F2400.000
G1 X99.399 Y106.699 E0.00868 ; infill
;WIDTH:0.214676
G1 X99.312 Y106.827 E0.00221 ; infill
;WIDTH:0.183798
G1 X99.226 Y106.955 E0.00181 ; infill
;WIDTH:0.15292
G1 X99.129 Y107.105 E0.00163 ; infill
;WIDTH:0.125357
G1 X99.034 Y107.253 E0.00121 ; infill
;WIDTH:0.0982403
G1 X98.304 Y108.155 E0.00534 ; infill
;WIDTH:0.205218
G1 X98.186 Y108.285 E0.00238 ; infill
G1 X97.848 Y108.765 E0.00792 ; infill
G1 X98.045 Y108.304 F10800.000 ; move to first infill point
;WIDTH:0.180988
G1 F2400.000
G1 X98.069 Y109.060 E0.00868 ; infill
;WIDTH:0.165302
G1 X98.031 Y109.353 E0.00301 ; infill
;WIDTH:0.145198
G1 X97.979 Y110.549 E0.01018 ; infill
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.031 Y109.353 E-0.31583 ; wipe and retract
;WIPE_END
G1 E-2.08417 F2400.000 ; retract
G1 Z0.675 F10800.000 ; lift Z
G1 Z0.800 ; move to next layer (3)
;AFTER_LAYER_CHANGE
;0.8
G1 Z0.875 ; lift Z
G1 X103.462 Y103.345 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.585 Y103.174 E0.00713 ; perimeter
G1 X103.640 Y102.495 E0.02308 ; perimeter
G1 X103.613 Y102.361 E0.00460 ; perimeter
G1 X104.168 Y103.010 E0.02889 ; perimeter
G1 X104.207 Y103.004 E0.00136 ; perimeter
G1 X103.689 Y103.206 E0.01882 ; perimeter
G1 X103.513 Y103.314 E0.00700 ; perimeter
G1 X103.447 Y101.650 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X102.884 Y101.104 E0.02657 ; perimeter
G1 X102.085 Y101.231 E0.02737 ; perimeter
G1 X102.338 Y101.073 E0.01010 ; perimeter
G1 X102.683 Y100.911 E0.01290 ; perimeter
G1 X102.897 Y100.784 E0.00841 ; perimeter
G1 X103.224 Y100.641 E0.01210 ; perimeter
G1 X103.669 Y100.328 E0.01841 ; perimeter
G1 X103.509 Y100.618 E0.01119 ; perimeter
G1 X103.426 Y101.374 E0.02576 ; perimeter
G1 X103.443 Y101.591 E0.00735 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.884 Y101.104 E-0.19561 ; wipe and retract
G1 X102.085 Y101.231 E-0.21339 ; wipe and retract
G1 X102.338 Y101.073 E-0.07877 ; wipe and retract
G1 X102.683 Y100.911 E-0.10053 ; wipe and retract
G1 X102.897 Y100.784 E-0.06558 ; wipe and retract
G1 X103.224 Y100.641 E-0.09432 ; wipe and retract
G1 X103.669 Y100.328 E-0.14349 ; wipe and retract
G1 X103.509 Y100.618 E-0.08725 ; wipe and retract
G1 X103.426 Y101.374 E-0.20084 ; wipe and retract
G1 X103.443 Y101.591 E-0.05727 ; wipe and retract
;WIPE_END
G1 E-1.16295 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X104.847 Y98.879 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.898 Y98.764 E0.00423 ; perimeter
G1 X105.068 Y98.205 E0.01978 ; perimeter
G1 X105.113 Y98.117 E0.00335 ; perimeter
G1 X105.197 Y98.041 E0.00381 ; perimeter
G1 X105.781 Y97.855 E0.02076 ; perimeter
G1 X105.404 Y98.248 E0.01843 ; perimeter
G1 X104.887 Y98.834 E0.02644 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.898 Y98.764 E-0.01853 ; wipe and retract
G1 X105.068 Y98.205 E-0.15420 ; wipe and retract
G1 X105.113 Y98.117 E-0.02608 ; wipe and retract
G1 X105.197 Y98.041 E-0.02967 ; wipe and retract
G1 X105.781 Y97.855 E-0.16187 ; wipe and retract
G1 X105.404 Y98.248 E-0.14368 ; wipe and retract
G1 X104.887 Y98.834 E-0.20609 ; wipe and retract
;WIPE_END
G1 E-1.65987 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X104.360 Y102.493 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.959 Y102.025 E0.02853 ; perimeter
G1 X103.910 Y101.382 E0.02984 ; perimeter
G1 X103.978 Y100.766 E0.02873 ; perimeter
G1 X104.232 Y100.305 E0.02438 ; perimeter
G1 X105.758 Y98.575 E0.10688 ; perimeter
G1 X106.293 Y98.019 E0.03571 ; perimeter
G1 X106.938 Y97.391 E0.04172 ; perimeter
G1 X107.448 Y96.967 E0.03069 ; perimeter
G1 X107.586 Y96.875 E0.00768 ; perimeter
G1 X108.165 Y96.605 E0.02958 ; perimeter
G1 X109.550 Y96.022 E0.06964 ; perimeter
G1 X110.284 Y96.179 E0.03476 ; perimeter
G1 X110.836 Y96.511 E0.02982 ; perimeter
G1 X111.065 Y96.971 E0.02383 ; perimeter
G1 X111.023 Y97.133 E0.00770 ; perimeter
G1 X111.048 Y97.287 E0.00727 ; perimeter
G1 X110.803 Y97.724 E0.02320 ; perimeter
G1 X109.290 Y99.994 E0.12636 ; perimeter
G1 X108.522 Y101.080 E0.06162 ; perimeter
G1 X107.915 Y101.390 E0.03155 ; perimeter
G1 X105.088 Y102.381 E0.13878 ; perimeter
G1 X104.419 Y102.484 E0.03135 ; perimeter
G1 X104.023 Y102.709 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.959 Y102.025 E-0.17143 ; wipe and retract
G1 X103.910 Y101.382 E-0.16999 ; wipe and retract
G1 X103.978 Y100.766 E-0.16365 ; wipe and retract
G1 X104.232 Y100.305 E-0.13890 ; wipe and retract
G1 X105.758 Y98.575 E-0.60891 ; wipe and retract
G1 X106.293 Y98.019 E-0.20345 ; wipe and retract
G1 X106.938 Y97.391 E-0.23770 ; wipe and retract
G1 X107.448 Y96.967 E-0.17484 ; wipe and retract
G1 X107.586 Y96.875 E-0.04376 ; wipe and retract
G1 X108.165 Y96.605 E-0.16854 ; wipe and retract
G1 X108.859 Y96.313 E-0.19884 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X109.737 Y95.569 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.919 Y95.472 E0.00696 ; perimeter
G1 X110.235 Y95.215 E0.01378 ; perimeter
G1 X110.613 Y95.814 E0.02398 ; perimeter
G1 X110.464 Y95.724 E0.00590 ; perimeter
G1 X109.796 Y95.582 E0.02311 ; perimeter
G1 X111.321 Y96.404 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X111.891 Y96.588 E0.02026 ; perimeter
G1 X112.109 Y96.556 E0.00746 ; perimeter
G1 X111.795 Y96.779 E0.01303 ; perimeter
G1 X111.519 Y97.179 E0.01644 ; perimeter
G1 X111.576 Y96.918 E0.00904 ; perimeter
G1 X111.348 Y96.458 E0.01737 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.891 Y96.588 E-0.14737 ; wipe and retract
G1 X112.109 Y96.556 E-0.05814 ; wipe and retract
G1 X111.795 Y96.779 E-0.10162 ; wipe and retract
G1 X111.519 Y97.179 E-0.12813 ; wipe and retract
G1 X111.576 Y96.918 E-0.07049 ; wipe and retract
G1 X111.348 Y96.458 E-0.13540 ; wipe and retract
;WIPE_END
G1 E-1.75885 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X108.274 Y102.187 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.555 Y102.378 E0.01577 ; perimeter
G1 X108.741 Y102.550 E0.01173 ; perimeter
G1 X109.261 Y103.990 E0.07090 ; perimeter
G1 X109.728 Y105.208 E0.06046 ; perimeter
G1 X110.066 Y106.181 E0.04772 ; perimeter
G1 X110.167 Y106.588 E0.01940 ; perimeter
G1 X110.017 Y106.942 E0.01781 ; perimeter
G1 X109.930 Y107.056 E0.00666 ; perimeter
G1 X109.284 Y107.638 E0.04026 ; perimeter
G1 X108.509 Y108.252 E0.04581 ; perimeter
G1 X107.681 Y108.948 E0.05010 ; perimeter
G1 X107.489 Y109.131 E0.01229 ; perimeter
G1 X106.822 Y109.650 E0.03915 ; perimeter
G1 X106.073 Y110.299 E0.04590 ; perimeter
G1 X104.365 Y111.668 E0.10140 ; perimeter
G1 X103.794 Y111.778 E0.02691 ; perimeter
G1 X103.136 Y111.653 E0.03102 ; perimeter
G1 X102.874 Y111.570 E0.01276 ; perimeter
G1 X101.919 Y111.353 E0.04534 ; perimeter
G1 X100.963 Y111.167 E0.04513 ; perimeter
G1 X100.703 Y111.076 E0.01278 ; perimeter
G1 X99.540 Y110.813 E0.05523 ; perimeter
G1 X98.605 Y110.557 E0.04488 ; perimeter
G1 X98.432 Y110.256 E0.01609 ; perimeter
G1 X98.383 Y109.867 E0.01817 ; perimeter
G1 X98.421 Y109.214 E0.03027 ; perimeter
G1 X98.553 Y108.689 E0.02509 ; perimeter
G1 X98.593 Y108.419 E0.01265 ; perimeter
G1 X98.872 Y108.015 E0.02275 ; perimeter
G1 X99.924 Y106.708 E0.07771 ; perimeter
G1 X100.397 Y106.284 E0.02943 ; perimeter
G1 X103.307 Y104.005 E0.17122 ; perimeter
G1 X103.905 Y103.639 E0.03243 ; perimeter
G1 X104.622 Y103.359 E0.03569 ; perimeter
G1 X106.395 Y102.718 E0.08734 ; perimeter
G1 X107.610 Y102.305 E0.05944 ; perimeter
G1 X108.215 Y102.197 E0.02844 ; perimeter
G1 X108.525 Y101.957 F10800.000 ; move inwards before travel
G1 X108.510 Y101.764 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.395 Y101.686 E0.00470 ; perimeter
G1 X108.808 Y101.475 E0.01568 ; perimeter
G1 X108.776 Y101.867 E0.01331 ; perimeter
G1 X108.811 Y101.970 E0.00368 ; perimeter
G1 X108.560 Y101.798 E0.01031 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.395 Y101.686 E-0.05249 ; wipe and retract
G1 X108.808 Y101.475 E-0.12222 ; wipe and retract
G1 X108.776 Y101.867 E-0.10376 ; wipe and retract
G1 X108.811 Y101.970 E-0.02870 ; wipe and retract
G1 X108.560 Y101.798 E-0.08041 ; wipe and retract
;WIPE_END
G1 E-2.01241 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X110.615 Y106.766 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.719 Y106.984 E0.00821 ; perimeter
G1 X110.904 Y107.127 E0.00789 ; perimeter
G1 X110.710 Y107.068 E0.00687 ; perimeter
G1 X110.422 Y107.208 E0.01085 ; perimeter
G1 X110.592 Y106.821 E0.01430 ; perimeter
G1 X110.750 Y107.584 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.383 Y107.778 E0.03066 ; perimeter
G1 X112.557 Y108.557 E0.06530 ; perimeter
G1 X113.088 Y108.941 E0.03032 ; perimeter
G1 X113.436 Y109.261 E0.02191 ; perimeter
G1 X113.507 Y109.531 E0.01293 ; perimeter
G1 X113.494 Y109.711 E0.00837 ; perimeter
G1 X113.136 Y110.188 E0.02761 ; perimeter
G1 X112.572 Y110.685 E0.03484 ; perimeter
G1 X109.869 Y112.900 E0.16188 ; perimeter
G1 X108.734 Y113.865 E0.06900 ; perimeter
G1 X108.254 Y114.146 E0.02574 ; perimeter
G1 X107.885 Y114.173 E0.01713 ; perimeter
G1 X107.518 Y114.050 E0.01797 ; perimeter
G1 X106.533 Y113.405 E0.05452 ; perimeter
G1 X105.671 Y112.790 E0.04904 ; perimeter
G1 X105.309 Y112.365 E0.02587 ; perimeter
G1 X105.371 Y111.921 E0.02076 ; perimeter
G1 X105.736 Y111.516 E0.02526 ; perimeter
G1 X106.352 Y111.022 E0.03655 ; perimeter
G1 X107.362 Y110.158 E0.06159 ; perimeter
G1 X107.785 Y109.839 E0.02453 ; perimeter
G1 X110.283 Y107.754 E0.15069 ; perimeter
G1 X110.536 Y107.688 E0.01215 ; perimeter
G1 X110.696 Y107.610 E0.00823 ; perimeter
G1 X110.978 Y107.255 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.383 Y107.778 E-0.18654 ; wipe and retract
G1 X112.557 Y108.557 E-0.37199 ; wipe and retract
G1 X113.088 Y108.941 E-0.17272 ; wipe and retract
G1 X113.436 Y109.261 E-0.12482 ; wipe and retract
G1 X113.507 Y109.531 E-0.07369 ; wipe and retract
G1 X113.494 Y109.711 E-0.04770 ; wipe and retract
G1 X113.136 Y110.188 E-0.15731 ; wipe and retract
G1 X112.572 Y110.685 E-0.19847 ; wipe and retract
G1 X109.869 Y112.900 E-0.92222 ; wipe and retract
G1 X109.798 Y112.961 E-0.02453 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X113.776 Y108.918 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.631 Y108.796 E0.02924 ; perimeter
G1 X114.610 Y108.988 E0.00656 ; perimeter
G1 X114.531 Y109.351 E0.01256 ; perimeter
G1 X114.482 Y109.413 E0.00268 ; perimeter
G1 X114.232 Y109.606 E0.01067 ; perimeter
G1 X113.974 Y109.756 E0.01013 ; perimeter
G1 X113.994 Y109.486 E0.00917 ; perimeter
G1 X113.866 Y109.001 E0.01698 ; perimeter
G1 X113.820 Y108.958 E0.00214 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.631 Y108.796 E-0.21822 ; wipe and retract
G1 X114.610 Y108.988 E-0.05115 ; wipe and retract
G1 X114.531 Y109.351 E-0.09795 ; wipe and retract
G1 X114.482 Y109.413 E-0.02087 ; wipe and retract
G1 X114.232 Y109.606 E-0.08321 ; wipe and retract
G1 X113.974 Y109.756 E-0.07894 ; wipe and retract
G1 X113.994 Y109.486 E-0.07150 ; wipe and retract
G1 X113.866 Y109.001 E-0.13240 ; wipe and retract
G1 X113.820 Y108.958 E-0.01671 ; wipe and retract
;WIPE_END
G1 E-1.62905 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X108.269 Y114.628 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.133 Y114.784 E0.00699 ; perimeter
G1 X107.936 Y114.874 E0.00732 ; perimeter
G1 X106.871 Y114.961 E0.03619 ; perimeter
G1 X105.834 Y114.998 E0.03510 ; perimeter
G1 X106.370 Y114.584 E0.02293 ; perimeter
G1 X106.238 Y113.787 E0.02735 ; perimeter
G1 X107.305 Y114.487 E0.04320 ; perimeter
G1 X107.824 Y114.661 E0.01852 ; perimeter
G1 X108.209 Y114.633 E0.01306 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.133 Y114.784 E-0.04463 ; wipe and retract
G1 X107.936 Y114.874 E-0.05704 ; wipe and retract
G1 X106.871 Y114.961 E-0.28216 ; wipe and retract
G1 X105.834 Y114.998 E-0.27366 ; wipe and retract
G1 X106.370 Y114.584 E-0.17874 ; wipe and retract
G1 X106.238 Y113.787 E-0.21320 ; wipe and retract
G1 X107.305 Y114.487 E-0.33677 ; wipe and retract
G1 X107.824 Y114.661 E-0.14436 ; wipe and retract
G1 X108.209 Y114.633 E-0.10179 ; wipe and retract
;WIPE_END
G1 E-0.76763 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X104.805 Y112.516 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.350 Y112.213 E0.01850 ; perimeter
G1 X104.234 Y112.184 E0.00406 ; perimeter
G1 X104.573 Y112.119 E0.01170 ; perimeter
G1 X104.892 Y111.863 E0.01385 ; perimeter
G1 X104.810 Y112.457 E0.02032 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.350 Y112.213 E-0.13736 ; wipe and retract
G1 X104.234 Y112.184 E-0.03162 ; wipe and retract
G1 X104.573 Y112.119 E-0.09120 ; wipe and retract
G1 X104.892 Y111.863 E-0.10796 ; wipe and retract
G1 X104.810 Y112.457 E-0.15842 ; wipe and retract
;WIPE_END
G1 E-1.87344 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X99.372 Y106.624 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.359 Y106.348 E0.00935 ; perimeter
G1 X99.672 Y106.286 E0.01083 ; perimeter
G1 X99.573 Y106.375 E0.00452 ; perimeter
G1 X99.410 Y106.577 E0.00879 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.359 Y106.348 E-0.06195 ; wipe and retract
G1 X99.672 Y106.286 E-0.08441 ; wipe and retract
G1 X99.573 Y106.375 E-0.03524 ; wipe and retract
G1 X99.410 Y106.577 E-0.06853 ; wipe and retract
;WIPE_END
G1 E-2.14987 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X98.108 Y108.402 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.080 Y108.595 E0.00658 ; perimeter
G1 X97.990 Y108.951 E0.01245 ; perimeter
G1 X97.795 Y108.598 E0.01366 ; perimeter
G1 X98.058 Y108.434 E0.01046 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.080 Y108.595 E-0.04279 ; wipe and retract
G1 X97.990 Y108.951 E-0.09704 ; wipe and retract
G1 X97.795 Y108.598 E-0.10650 ; wipe and retract
G1 X98.058 Y108.434 E-0.08155 ; wipe and retract
;WIPE_END
G1 E-2.07211 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X97.991 Y110.456 ; move to first perimeter point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.235 Y110.880 E0.01656 ; perimeter
G1 X97.786 Y110.962 E0.01543 ; perimeter
G1 X97.940 Y110.777 E0.00816 ; perimeter
G1 X97.982 Y110.515 E0.00895 ; perimeter
G1 X97.683 Y111.466 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.310 Y111.358 E0.02947 ; perimeter
G1 X99.325 Y111.521 E0.04762 ; perimeter
G1 X99.975 Y111.692 E0.03116 ; perimeter
G1 X100.909 Y111.888 E0.04420 ; perimeter
G1 X101.314 Y112.005 E0.01954 ; perimeter
G1 X103.085 Y112.398 E0.08401 ; perimeter
G1 X104.153 Y112.661 E0.05095 ; perimeter
G1 X105.511 Y113.566 E0.07560 ; perimeter
G1 X105.759 Y113.842 E0.01718 ; perimeter
G1 X105.848 Y114.379 E0.02520 ; perimeter
G1 X105.434 Y114.698 E0.02421 ; perimeter
G1 X103.770 Y114.903 E0.07766 ; perimeter
G1 X101.129 Y115.036 E0.12250 ; perimeter
G1 X99.706 Y115.077 E0.06595 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X97.425 Y115.143 E0.09535 ; perimeter (bridge)
G1 X96.660 Y115.112 E0.03200 ; perimeter (bridge)
G1 X96.308 Y115.126 E0.01472 ; perimeter (bridge)
G1 X96.142 Y115.046 E0.00770 ; perimeter (bridge)
G1 X95.959 Y114.885 E0.01018 ; perimeter (bridge)
G1 X95.724 Y114.721 E0.01199 ; perimeter (bridge)
G1 X95.455 Y114.340 E0.01949 ; perimeter (bridge)
G1 X95.426 Y114.160 E0.00759 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X95.289 Y113.741 E0.02046 ; perimeter
G1 X95.491 Y113.238 E0.02510 ; perimeter
G1 X96.291 Y112.551 E0.04883 ; perimeter
G1 X97.635 Y111.503 E0.07898 ; perimeter
G1 X97.756 Y111.072 F10800.000 ; move inwards before travel
G1 X97.485 Y110.571 ; move to first perimeter point
G1 F2400.000
G1 X97.608 Y109.793 E0.03647 ; perimeter
G1 X97.586 Y109.217 E0.02668 ; perimeter
G1 X97.320 Y108.735 E0.02553 ; perimeter
G1 X97.207 Y108.672 E0.00602 ; perimeter
G1 X97.136 Y108.548 E0.00658 ; perimeter
G1 X97.141 Y108.526 E0.00107 ; perimeter
G1 X97.293 Y108.343 E0.01098 ; perimeter
G1 X97.927 Y107.947 E0.03463 ; perimeter
G1 X98.354 Y107.501 E0.02862 ; perimeter
G1 X98.735 Y107.019 E0.02847 ; perimeter
G1 X98.798 Y106.832 E0.00912 ; perimeter
G1 X98.892 Y106.667 E0.00880 ; perimeter
G1 X98.871 Y106.394 E0.01269 ; perimeter
G1 X98.890 Y106.009 E0.01788 ; perimeter
G1 X98.934 Y105.955 E0.00321 ; perimeter
G1 X99.545 Y105.820 E0.02900 ; perimeter
G1 X100.034 Y105.597 E0.02488 ; perimeter
G1 X100.653 Y105.136 E0.03573 ; perimeter
G1 X102.383 Y103.775 E0.10200 ; perimeter
G1 X102.862 Y103.354 E0.02955 ; perimeter
G1 X103.115 Y103.002 E0.02007 ; perimeter
G1 X103.154 Y102.524 E0.02221 ; perimeter
G1 X103.121 Y102.363 E0.00760 ; perimeter
G1 X103.105 Y101.990 E0.01731 ; perimeter
G1 X102.721 Y101.618 E0.02473 ; perimeter
G1 X102.099 Y101.717 E0.02918 ; perimeter
G1 X101.487 Y102.093 E0.03328 ; perimeter
G1 X101.048 Y102.459 E0.02647 ; perimeter
G1 X100.619 Y102.744 E0.02387 ; perimeter
G1 X100.436 Y102.824 E0.00925 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X100.285 Y102.890 E0.00689 ; perimeter (bridge)
G1 X100.225 Y102.896 E0.00252 ; perimeter (bridge)
G1 X100.275 Y102.732 E0.00718 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X100.368 Y102.484 E0.01223 ; perimeter
G1 X100.656 Y102.001 E0.02610 ; perimeter
G1 X101.195 Y101.313 E0.04048 ; perimeter
G1 X101.690 Y100.910 E0.02956 ; perimeter
G1 X102.107 Y100.649 E0.02279 ; perimeter
G1 X102.457 Y100.485 E0.01788 ; perimeter
G1 X102.676 Y100.354 E0.01183 ; perimeter
G1 X102.986 Y100.219 E0.01570 ; perimeter
G1 X103.456 Y99.888 E0.02658 ; perimeter
G1 X104.148 Y99.132 E0.04750 ; perimeter
G1 X104.356 Y98.797 E0.01826 ; perimeter
G1 X104.445 Y98.596 E0.01019 ; perimeter
G1 X104.617 Y98.032 E0.02730 ; perimeter
G1 X104.690 Y97.877 E0.00794 ; perimeter
G1 X104.758 Y97.789 E0.00515 ; perimeter
G1 X104.950 Y97.614 E0.01201 ; perimeter
G1 X105.795 Y97.345 E0.04110 ; perimeter
G1 X106.255 Y96.964 E0.02766 ; perimeter
G1 X106.665 Y96.540 E0.02731 ; perimeter
G1 X107.023 Y96.246 E0.02146 ; perimeter
G1 X107.518 Y96.047 E0.02470 ; perimeter
G1 X109.218 Y95.300 E0.08604 ; perimeter
G1 X109.651 Y95.069 E0.02272 ; perimeter
G1 X110.121 Y94.686 E0.02808 ; perimeter
G1 X110.355 Y94.550 E0.01255 ; perimeter
G1 X110.697 Y94.420 E0.01696 ; perimeter
G1 X110.938 Y94.441 E0.01120 ; perimeter
G1 X111.071 Y94.562 E0.00834 ; perimeter
G1 X111.081 Y94.630 E0.00315 ; perimeter
G1 X110.981 Y94.765 E0.00779 ; perimeter
G1 X110.923 Y94.965 E0.00964 ; perimeter
G1 X110.753 Y95.133 E0.01105 ; perimeter
G1 X111.086 Y95.660 E0.02890 ; perimeter
G1 X111.452 Y95.940 E0.02134 ; perimeter
G1 X111.932 Y96.095 E0.02338 ; perimeter
G1 X112.616 Y95.995 E0.03202 ; perimeter
G1 X113.109 Y95.825 E0.02412 ; perimeter
G1 X113.722 Y95.676 E0.02925 ; perimeter
G1 X113.852 Y95.663 E0.00605 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X114.161 Y95.632 E0.01296 ; perimeter (bridge)
G1 X114.273 Y95.669 E0.00493 ; perimeter (bridge)
G1 X114.276 Y95.805 E0.00568 ; perimeter (bridge)
G1 X114.127 Y96.028 E0.01121 ; perimeter (bridge)
G1 X113.957 Y96.075 E0.00737 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X113.698 Y96.178 E0.01291 ; perimeter
G1 X113.097 Y96.504 E0.03166 ; perimeter
G1 X112.581 Y96.812 E0.02784 ; perimeter
G1 X112.144 Y97.123 E0.02486 ; perimeter
G1 X110.956 Y98.840 E0.09669 ; perimeter
G1 X109.411 Y101.168 E0.12946 ; perimeter
G1 X109.383 Y101.316 E0.00696 ; perimeter
G1 X109.284 Y101.574 E0.01281 ; perimeter
G1 X109.265 Y101.806 E0.01077 ; perimeter
G1 X109.721 Y103.138 E0.06522 ; perimeter
G1 X110.245 Y104.521 E0.06850 ; perimeter
G1 X110.749 Y105.929 E0.06928 ; perimeter
G1 X111.105 Y106.673 E0.03822 ; perimeter
G1 X111.526 Y106.999 E0.02468 ; perimeter
G1 X113.134 Y108.121 E0.09080 ; perimeter
G1 X113.768 Y108.432 E0.03273 ; perimeter
G1 X114.359 Y108.348 E0.02763 ; perimeter
G1 X114.667 Y107.701 E0.03315 ; perimeter
G1 X114.796 Y107.194 E0.02423 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.013 Y106.343 E0.03672 ; perimeter (bridge)
G1 X115.053 Y106.052 E0.01229 ; perimeter (bridge)
G1 X115.170 Y105.519 E0.02279 ; perimeter (bridge)
G1 X115.189 Y105.617 E0.00418 ; perimeter (bridge)
G1 X115.255 Y106.978 E0.05693 ; perimeter (bridge)
G1 X115.228 Y107.372 E0.01654 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X115.161 Y108.362 E0.04595 ; perimeter
G1 X115.087 Y109.065 E0.03275 ; perimeter
G1 X114.973 Y109.588 E0.02476 ; perimeter
G1 X114.851 Y109.737 E0.00895 ; perimeter
G1 X114.473 Y110.029 E0.02212 ; perimeter
G1 X114.011 Y110.301 E0.02482 ; perimeter
G1 X113.620 Y110.691 E0.02558 ; perimeter
G1 X112.620 Y111.494 E0.05941 ; perimeter
G1 X112.016 Y112.020 E0.03713 ; perimeter
G1 X111.821 Y112.152 E0.01091 ; perimeter
G1 X109.431 Y114.148 E0.14422 ; perimeter
G1 X108.997 Y114.527 E0.02671 ; perimeter
G1 X108.612 Y114.968 E0.02708 ; perimeter
G1 X108.615 Y115.031 E0.00295 ; perimeter
G1 X108.436 Y115.175 E0.01063 ; perimeter
G1 X108.060 Y115.347 E0.01917 ; perimeter
G1 X106.899 Y115.442 E0.05397 ; perimeter
G1 X104.974 Y115.511 E0.08924 ; perimeter
G1 X99.957 Y115.497 E0.23239 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X96.362 Y115.426 E0.15027 ; perimeter (bridge)
G1 X95.860 Y115.286 E0.02179 ; perimeter (bridge)
G1 X95.390 Y114.779 E0.02888 ; perimeter (bridge)
G1 X95.270 Y114.552 E0.01072 ; perimeter (bridge)
G1 X94.951 Y114.183 E0.02040 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X94.634 Y113.765 E0.02431 ; perimeter
G1 X94.498 Y113.446 E0.01605 ; perimeter
G1 X94.533 Y113.306 E0.00665 ; perimeter
G1 X94.678 Y113.095 E0.01186 ; perimeter
G1 X95.697 Y112.227 E0.06204 ; perimeter
G1 X96.986 Y111.089 E0.07965 ; perimeter
G1 X97.264 Y110.837 E0.01734 ; perimeter
G1 X97.446 Y110.617 E0.01327 ; perimeter
G1 X97.879 Y110.506 F10800.000 ; move inwards before travel
G1 X97.165 Y111.412 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.282264
G1 F2400.000
G1 X96.628 Y111.858 E0.01390 ; infill
;WIDTH:0.239454
G1 X96.091 Y112.304 E0.01141 ; infill
;WIDTH:0.196643
G1 X95.239 Y113.035 E0.01435 ; infill
G1 X94.793 Y113.522 E0.00844 ; infill
G1 X94.845 Y113.644 F10800.000 ; move to first infill point
;WIDTH:0.406036
G1 F2400.000
G1 X95.213 Y112.956 E0.02356 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.845 Y113.644 E-0.20596 ; wipe and retract
;WIPE_END
G1 E-2.19404 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X102.462 Y115.237 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.131578
G1 F2400.000
G1 X103.128 Y115.221 E0.00491 ; infill
;WIDTH:0.16658
G1 X103.797 Y115.205 E0.00688 ; infill
;WIDTH:0.2126
G1 X104.187 Y115.183 E0.00551 ; infill
;WIDTH:0.258622
G1 X104.577 Y115.161 E0.00701 ; infill
;WIDTH:0.304645
G1 X104.967 Y115.139 E0.00850 ; infill
;WIDTH:0.335342
G1 X105.348 Y115.110 E0.00928 ; infill
;WIDTH:0.352001
G1 X105.607 Y115.080 E0.00671 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.348 Y115.110 E-0.06891 ; wipe and retract
;WIPE_END
G1 E-2.33109 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X105.182 Y111.529 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.295454
G1 F2400.000
G1 X105.490 Y111.240 E0.00886 ; infill
G1 X106.305 Y110.581 E0.02201 ; infill
G1 X107.056 Y109.935 E0.02080 ; infill
G1 X107.724 Y109.413 E0.01780 ; infill
G1 X110.100 Y107.414 E0.06520 ; infill
G1 X110.325 Y107.471 E0.00487 ; infill
G1 X111.118 Y107.238 F10800.000 ; move to first infill point
;WIDTH:0.369246
G1 F2400.000
G1 X111.407 Y107.384 E0.00877 ; infill
;WIDTH:0.254512
G1 X111.553 Y107.458 E0.00289 ; infill
G1 X112.965 Y108.424 E0.03009 ; infill
;WIDTH:0.285067
G1 X113.211 Y108.572 E0.00578 ; infill
;WIDTH:0.315621
G1 X113.457 Y108.720 E0.00651 ; infill
G1 X114.726 Y108.539 F10800.000 ; move to first infill point
;WIDTH:0.334638
G1 F2400.000
G1 X114.785 Y108.330 E0.00527 ; infill
;WIDTH:0.232861
G1 X114.869 Y108.011 E0.00521 ; infill
;WIDTH:0.10757
G1 X114.939 Y107.707 E0.00168 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.869 Y108.011 E-0.08224 ; wipe and retract
;WIPE_END
G1 E-2.31776 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X113.704 Y110.266 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.137675
G1 F2400.000
G1 X113.620 Y110.240 E0.00069 ; infill
;WIDTH:0.250905
G1 X113.571 Y110.221 E0.00092 ; infill
G1 X113.387 Y110.431 E0.00482 ; infill
G1 X112.787 Y110.936 E0.01357 ; infill
;WIDTH:0.221824
G1 X110.086 Y113.160 E0.05205 ; infill
G1 X108.935 Y114.135 E0.02243 ; infill
G1 X108.623 Y114.360 E0.00573 ; infill
G1 X107.246 Y114.704 F10800.000 ; move to first infill point
;WIDTH:0.102084
G1 F2400.000
G1 X106.576 Y114.581 E0.00335 ; infill
G1 X106.553 Y114.769 F10800.000 ; move to first infill point
;WIDTH:0.187312
G1 F2400.000
G1 X106.676 Y114.672 E0.00188 ; infill
;WIDTH:0.225522
G1 X106.799 Y114.575 E0.00237 ; infill
;WIDTH:0.263732
G1 X106.921 Y114.479 E0.00287 ; infill
G1 X105.940 Y113.460 F10800.000 ; move to first infill point
;WIDTH:0.295815
G1 F2400.000
G1 X105.761 Y113.301 E0.00504 ; infill
;WIDTH:0.287548
G1 X105.408 Y113.053 E0.00877 ; infill
G1 X105.126 Y112.802 E0.00768 ; infill
;WIDTH:0.407744
G1 X104.985 Y112.676 E0.00573 ; infill
G1 X103.993 Y112.178 F10800.000 ; move to first infill point
;WIDTH:0.354994
G1 F2400.000
G1 X103.767 Y112.167 E0.00586 ; infill
;WIDTH:0.33551
G1 X103.171 Y112.037 E0.01485 ; infill
;WIDTH:0.302531
G1 X101.000 Y111.540 E0.04808 ; infill
;WIDTH:0.279063
G1 X98.767 Y111.021 E0.04501 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.000 Y111.540 E-0.60492 ; wipe and retract
;WIPE_END
G1 E-1.79508 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X98.533 Y107.851 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.29242
G1 F2400.000
G1 X99.052 Y107.208 E0.01714 ; infill
G1 X99.136 Y106.788 E0.00888 ; infill
G1 X99.877 Y106.155 F10800.000 ; move to first infill point
;WIDTH:0.311641
G1 F2400.000
G1 X100.242 Y105.919 E0.00971 ; infill
G1 X102.626 Y104.061 E0.06754 ; infill
;WIDTH:0.347087
G1 X103.090 Y103.677 E0.01524 ; infill
;WIDTH:0.365699
G1 X103.167 Y103.619 E0.00258 ; infill
G1 X103.155 Y103.369 E0.00671 ; infill
G1 X104.440 Y102.941 F10800.000 ; move to first infill point
;WIDTH:0.433282
G1 F2400.000
G1 X104.683 Y102.879 E0.00813 ; infill
;WIDTH:0.310915
G1 X105.193 Y102.748 E0.01174 ; infill
G1 X106.272 Y102.363 E0.02554 ; infill
;WIDTH:0.324949
G1 X107.525 Y101.932 E0.03108 ; infill
;WIDTH:0.354974
G1 X107.815 Y101.856 E0.00778 ; infill
;WIDTH:0.384997
G1 X108.105 Y101.780 E0.00852 ; infill
G1 X108.947 Y102.170 F10800.000 ; move to first infill point
;WIDTH:0.278913
G1 F2400.000
G1 X109.068 Y102.369 E0.00458 ; infill
G1 X109.382 Y103.262 E0.01857 ; infill
G1 X110.066 Y105.087 E0.03824 ; infill
;WIDTH:0.291148
G1 X110.418 Y106.083 E0.02181 ; infill
;WIDTH:0.312293
G1 X110.520 Y106.368 E0.00679 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.418 Y106.083 E-0.07996 ; wipe and retract
;WIPE_END
G1 E-2.32004 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X109.110 Y100.920 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.307133
G1 F2400.000
G1 X110.648 Y98.629 E0.06061 ; infill
;WIDTH:0.322664
G1 X111.130 Y97.919 E0.01997 ; infill
;WIDTH:0.338495
G1 X111.340 Y97.583 E0.00974 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.130 Y97.919 E-0.10453 ; wipe and retract
;WIPE_END
G1 E-2.29547 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X113.439 Y96.017 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.127616
G1 F2400.000
G1 X112.936 Y96.225 E0.00384 ; infill
;WIDTH:0.230415
G1 X112.339 Y96.482 E0.01013 ; infill
G1 X111.221 Y96.095 F10800.000 ; move to first infill point
;WIDTH:0.130814
G1 F2400.000
G1 X110.860 Y95.906 E0.00298 ; infill
G1 X110.964 Y95.870 F10800.000 ; move to first infill point
;WIDTH:0.124475
G1 F2400.000
G1 X110.815 Y96.005 E0.00136 ; infill
G1 X110.771 Y96.191 E0.00129 ; infill
G1 X109.465 Y95.784 F10800.000 ; move to first infill point
;WIDTH:0.335645
G1 F2400.000
G1 X109.018 Y95.814 E0.01092 ; infill
G1 X107.237 Y96.608 E0.04745 ; infill
G1 X106.946 Y96.845 E0.00914 ; infill
G1 X105.987 Y97.730 E0.03176 ; infill
G1 X104.712 Y99.078 F10800.000 ; move to first infill point
;WIDTH:0.430829
G1 F2400.000
G1 X104.493 Y99.373 E0.01184 ; infill
;WIDTH:0.40221
G1 X103.812 Y100.133 E0.03049 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.493 Y99.373 E-0.26930 ; wipe and retract
;WIPE_END
G1 E-2.13070 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 X101.868 Y101.338 ; move to first infill point
G1 Z0.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.423502
G1 F2400.000
G1 X101.492 Y101.604 E0.01456 ; infill
;WIDTH:0.388479
G1 X101.387 Y101.698 E0.00405 ; infill
;WIDTH:0.33853
G1 X101.282 Y101.792 E0.00347 ; infill
;WIDTH:0.288583
G1 X101.149 Y101.928 E0.00387 ; infill
;WIDTH:0.247228
G1 X101.029 Y102.051 E0.00292 ; infill
;WIDTH:0.210892
G1 X100.910 Y102.174 E0.00240 ; infill
;WIDTH:0.174556
G1 X100.769 Y102.340 E0.00238 ; infill
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.910 Y102.174 E-0.05737 ; wipe and retract
;WIPE_END
G1 E-2.34263 F2400.000 ; retract
G1 Z0.875 F10800.000 ; lift Z
G1 Z1.000 ; move to next layer (4)
;AFTER_LAYER_CHANGE
;1
G1 Z1.075 ; lift Z
G1 X103.597 Y102.325 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.835 Y102.699 E0.01503 ; perimeter
G1 X104.366 Y102.969 E0.02017 ; perimeter
G1 X103.720 Y103.210 E0.02332 ; perimeter
G1 X103.406 Y103.397 E0.01237 ; perimeter
G1 X103.562 Y103.209 E0.00825 ; perimeter
G1 X103.632 Y102.532 E0.02303 ; perimeter
G1 X103.607 Y102.384 E0.00510 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.835 Y102.699 E-0.10279 ; wipe and retract
G1 X104.366 Y102.969 E-0.15723 ; wipe and retract
G1 X103.720 Y103.210 E-0.18181 ; wipe and retract
G1 X103.406 Y103.397 E-0.09646 ; wipe and retract
G1 X103.562 Y103.209 E-0.06433 ; wipe and retract
G1 X103.632 Y102.532 E-0.17954 ; wipe and retract
G1 X103.607 Y102.384 E-0.03979 ; wipe and retract
;WIPE_END
G1 E-1.57806 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X108.308 Y102.218 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.735 Y102.642 E0.02783 ; perimeter
G1 X109.992 Y106.039 E0.16778 ; perimeter
G1 X110.136 Y106.626 E0.02803 ; perimeter
G1 X110.046 Y106.839 E0.01071 ; perimeter
G1 X109.801 Y107.158 E0.01860 ; perimeter
G1 X109.684 Y107.262 E0.00726 ; perimeter
G1 X106.903 Y109.551 E0.16685 ; perimeter
G1 X106.720 Y109.738 E0.01212 ; perimeter
G1 X106.330 Y110.030 E0.02256 ; perimeter
G1 X105.313 Y110.870 E0.06109 ; perimeter
G1 X105.132 Y111.055 E0.01201 ; perimeter
G1 X104.744 Y111.344 E0.02243 ; perimeter
G1 X104.393 Y111.651 E0.02161 ; perimeter
G1 X103.736 Y111.732 E0.03066 ; perimeter
G1 X103.207 Y111.650 E0.02478 ; perimeter
G1 X101.621 Y111.265 E0.07559 ; perimeter
G1 X99.301 Y110.757 E0.11002 ; perimeter
G1 X98.668 Y110.520 E0.03133 ; perimeter
G1 X98.418 Y110.167 E0.02006 ; perimeter
G1 X98.410 Y109.715 E0.02091 ; perimeter
G1 X98.437 Y109.313 E0.01870 ; perimeter
G1 X98.488 Y108.962 E0.01641 ; perimeter
G1 X98.619 Y108.452 E0.02438 ; perimeter
G1 X98.719 Y108.274 E0.00950 ; perimeter
G1 X99.733 Y106.955 E0.07703 ; perimeter
G1 X100.300 Y106.391 E0.03703 ; perimeter
G1 X103.385 Y103.971 E0.18165 ; perimeter
G1 X103.930 Y103.646 E0.02937 ; perimeter
G1 X106.614 Y102.647 E0.13267 ; perimeter
G1 X107.691 Y102.297 E0.05246 ; perimeter
G1 X108.250 Y102.231 E0.02608 ; perimeter
G1 X108.637 Y101.990 F10800.000 ; move inwards before travel
G1 X108.321 Y101.722 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.792 Y101.419 E0.01897 ; perimeter
G1 X108.877 Y101.325 E0.00429 ; perimeter
G1 X108.782 Y101.791 E0.01607 ; perimeter
G1 X108.896 Y102.123 E0.01189 ; perimeter
G1 X108.462 Y101.691 E0.02073 ; perimeter
G1 X108.379 Y101.709 E0.00287 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.792 Y101.419 E-0.13316 ; wipe and retract
G1 X108.877 Y101.325 E-0.03346 ; wipe and retract
G1 X108.782 Y101.791 E-0.12532 ; wipe and retract
G1 X108.896 Y102.123 E-0.09269 ; wipe and retract
G1 X108.462 Y101.691 E-0.16162 ; wipe and retract
G1 X108.379 Y101.709 E-0.02238 ; wipe and retract
;WIPE_END
G1 E-1.83137 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X102.942 Y101.133 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.077 Y101.180 E0.02931 ; perimeter
G1 X101.798 Y101.339 E0.01088 ; perimeter
G1 X101.957 Y101.187 E0.00744 ; perimeter
G1 X102.235 Y100.971 E0.01192 ; perimeter
G1 X103.026 Y100.526 E0.03073 ; perimeter
G1 X103.623 Y100.156 E0.02376 ; perimeter
G1 X103.882 Y99.945 E0.01131 ; perimeter
G1 X104.414 Y99.348 E0.02706 ; perimeter
G1 X104.720 Y98.820 E0.02065 ; perimeter
G1 X104.892 Y98.337 E0.01737 ; perimeter
G1 X105.000 Y98.136 E0.00772 ; perimeter
G1 X105.076 Y98.049 E0.00392 ; perimeter
G1 X105.219 Y97.984 E0.00530 ; perimeter
G1 X105.769 Y97.834 E0.01931 ; perimeter
G1 X103.798 Y100.084 E0.10125 ; perimeter
G1 X103.523 Y100.653 E0.02141 ; perimeter
G1 X103.436 Y101.328 E0.02301 ; perimeter
G1 X103.450 Y101.702 E0.01270 ; perimeter
G1 X102.982 Y101.177 E0.02380 ; perimeter
G1 X104.486 Y102.489 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.171 Y102.330 E0.01634 ; perimeter
G1 X103.942 Y101.968 E0.01984 ; perimeter
G1 X103.919 Y101.350 E0.02865 ; perimeter
G1 X103.991 Y100.793 E0.02603 ; perimeter
G1 X104.204 Y100.352 E0.02269 ; perimeter
G1 X105.951 Y98.339 E0.12345 ; perimeter
G1 X106.436 Y97.839 E0.03228 ; perimeter
G1 X106.968 Y97.331 E0.03403 ; perimeter
G1 X107.597 Y96.866 E0.03627 ; perimeter
G1 X109.041 Y96.195 E0.07372 ; perimeter
G1 X109.490 Y96.014 E0.02245 ; perimeter
G1 X110.272 Y96.155 E0.03683 ; perimeter
G1 X110.851 Y96.554 E0.03255 ; perimeter
G1 X111.072 Y96.977 E0.02212 ; perimeter
G1 X110.991 Y97.374 E0.01878 ; perimeter
G1 X110.798 Y97.721 E0.01838 ; perimeter
G1 X109.139 Y100.213 E0.13867 ; perimeter
G1 X108.755 Y100.746 E0.03041 ; perimeter
G1 X108.478 Y101.047 E0.01895 ; perimeter
G1 X108.005 Y101.352 E0.02606 ; perimeter
G1 X107.504 Y101.515 E0.02442 ; perimeter
G1 X107.225 Y101.635 E0.01408 ; perimeter
G1 X106.697 Y101.796 E0.02555 ; perimeter
G1 X105.978 Y102.071 E0.03566 ; perimeter
G1 X105.688 Y102.148 E0.01390 ; perimeter
G1 X105.198 Y102.339 E0.02438 ; perimeter
G1 X104.860 Y102.436 E0.01630 ; perimeter
G1 X104.545 Y102.481 E0.01473 ; perimeter
G1 X104.241 Y102.743 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.171 Y102.330 E-0.10644 ; wipe and retract
G1 X103.942 Y101.968 E-0.11306 ; wipe and retract
G1 X103.919 Y101.350 E-0.16320 ; wipe and retract
G1 X103.991 Y100.793 E-0.14827 ; wipe and retract
G1 X104.204 Y100.352 E-0.12926 ; wipe and retract
G1 X105.951 Y98.339 E-0.70330 ; wipe and retract
G1 X106.436 Y97.839 E-0.18391 ; wipe and retract
G1 X106.968 Y97.331 E-0.19387 ; wipe and retract
G1 X107.597 Y96.866 E-0.20663 ; wipe and retract
G1 X108.739 Y96.336 E-0.33207 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X109.732 Y95.568 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.920 Y95.450 E0.00750 ; perimeter
G1 X110.265 Y95.135 E0.01581 ; perimeter
G1 X110.551 Y95.588 E0.01811 ; perimeter
G1 X110.561 Y95.769 E0.00615 ; perimeter
G1 X110.460 Y95.700 E0.00415 ; perimeter
G1 X109.791 Y95.578 E0.02302 ; perimeter
G1 X111.339 Y96.446 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X111.683 Y96.500 E0.01180 ; perimeter
G1 X111.925 Y96.583 E0.00866 ; perimeter
G1 X112.186 Y96.533 E0.00896 ; perimeter
G1 X111.821 Y96.782 E0.01493 ; perimeter
G1 X111.520 Y97.192 E0.01723 ; perimeter
G1 X111.579 Y96.906 E0.00988 ; perimeter
G1 X111.367 Y96.499 E0.01554 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.683 Y96.500 E-0.08356 ; wipe and retract
G1 X111.925 Y96.583 E-0.06753 ; wipe and retract
G1 X112.186 Y96.533 E-0.06988 ; wipe and retract
G1 X111.821 Y96.782 E-0.11638 ; wipe and retract
G1 X111.520 Y97.192 E-0.13436 ; wipe and retract
G1 X111.579 Y96.906 E-0.07706 ; wipe and retract
G1 X111.367 Y96.499 E-0.12112 ; wipe and retract
;WIPE_END
G1 E-1.73011 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X114.951 Y107.898 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.878 Y109.292 E0.04726 ; perimeter
G1 X114.822 Y109.543 E0.00869 ; perimeter
G1 X114.606 Y109.562 E0.00737 ; perimeter
G1 X114.491 Y109.623 E0.00440 ; perimeter
G1 X114.224 Y109.656 E0.00910 ; perimeter
G1 X113.856 Y109.926 E0.01544 ; perimeter
G1 X113.908 Y109.240 E0.02327 ; perimeter
G1 X113.582 Y108.830 E0.01773 ; perimeter
G1 X114.467 Y108.702 E0.03028 ; perimeter
G1 X114.934 Y107.955 E0.02981 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.878 Y109.292 E-0.35315 ; wipe and retract
G1 X114.822 Y109.543 E-0.06771 ; wipe and retract
G1 X114.606 Y109.562 E-0.05745 ; wipe and retract
G1 X114.491 Y109.623 E-0.03430 ; wipe and retract
G1 X114.224 Y109.656 E-0.07097 ; wipe and retract
G1 X113.856 Y109.926 E-0.12038 ; wipe and retract
G1 X113.908 Y109.240 E-0.18143 ; wipe and retract
G1 X113.582 Y108.830 E-0.13820 ; wipe and retract
G1 X114.467 Y108.702 E-0.23609 ; wipe and retract
G1 X114.934 Y107.955 E-0.23239 ; wipe and retract
;WIPE_END
G1 E-0.90792 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X111.071 Y107.214 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.661 Y107.093 E0.01444 ; perimeter
G1 X110.338 Y107.250 E0.01217 ; perimeter
G1 X110.466 Y107.084 E0.00709 ; perimeter
G1 X110.628 Y106.700 E0.01410 ; perimeter
G1 X110.768 Y106.972 E0.01035 ; perimeter
G1 X111.024 Y107.177 E0.01109 ; perimeter
G1 X110.704 Y107.608 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.325 Y107.792 E0.03000 ; perimeter
G1 X111.638 Y107.979 E0.01687 ; perimeter
G1 X113.089 Y108.986 E0.08183 ; perimeter
G1 X113.413 Y109.392 E0.02408 ; perimeter
G1 X113.382 Y109.801 E0.01897 ; perimeter
G1 X113.050 Y110.210 E0.02441 ; perimeter
G1 X108.622 Y113.879 E0.26640 ; perimeter
G1 X108.146 Y114.101 E0.02433 ; perimeter
G1 X107.796 Y114.100 E0.01622 ; perimeter
G1 X107.410 Y113.937 E0.01941 ; perimeter
G1 X105.590 Y112.709 E0.10169 ; perimeter
G1 X105.407 Y112.421 E0.01581 ; perimeter
G1 X105.355 Y111.979 E0.02061 ; perimeter
G1 X105.615 Y111.671 E0.01865 ; perimeter
G1 X107.254 Y110.271 E0.09986 ; perimeter
G1 X107.849 Y109.822 E0.03451 ; perimeter
G1 X110.261 Y107.795 E0.14594 ; perimeter
G1 X110.422 Y107.746 E0.00778 ; perimeter
G1 X110.650 Y107.635 E0.01176 ; perimeter
G1 X110.924 Y107.274 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.325 Y107.792 E-0.18290 ; wipe and retract
G1 X111.638 Y107.979 E-0.09610 ; wipe and retract
G1 X113.089 Y108.986 E-0.46619 ; wipe and retract
G1 X113.413 Y109.392 E-0.13716 ; wipe and retract
G1 X113.382 Y109.801 E-0.10805 ; wipe and retract
G1 X113.050 Y110.210 E-0.13904 ; wipe and retract
G1 X109.693 Y112.992 E-1.15056 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X104.859 Y111.884 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.941 Y112.586 E0.02392 ; perimeter
G1 X105.005 Y112.686 E0.00400 ; perimeter
G1 X104.526 Y112.358 E0.01964 ; perimeter
G1 X104.267 Y112.230 E0.00977 ; perimeter
G1 X104.065 Y112.177 E0.00706 ; perimeter
G1 X104.598 Y112.112 E0.01818 ; perimeter
G1 X104.814 Y111.924 E0.00969 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.941 Y112.586 E-0.17803 ; wipe and retract
G1 X105.005 Y112.686 E-0.03116 ; wipe and retract
G1 X104.526 Y112.358 E-0.15308 ; wipe and retract
G1 X104.267 Y112.230 E-0.07621 ; wipe and retract
G1 X104.065 Y112.177 E-0.05505 ; wipe and retract
G1 X104.598 Y112.112 E-0.14174 ; wipe and retract
G1 X104.814 Y111.924 E-0.07553 ; wipe and retract
;WIPE_END
G1 E-1.68921 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X106.139 Y113.661 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.179 Y114.363 E0.04248 ; perimeter
G1 X107.698 Y114.582 E0.01905 ; perimeter
G1 X108.252 Y114.583 E0.01876 ; perimeter
G1 X108.662 Y114.392 E0.01530 ; perimeter
G1 X108.409 Y114.736 E0.01442 ; perimeter
G1 X108.446 Y115.111 E0.01275 ; perimeter
G1 X107.556 Y115.177 E0.03022 ; perimeter
G1 X104.968 Y115.196 E0.08760 ; perimeter
G1 X105.214 Y115.178 E0.00836 ; perimeter
G1 X105.327 Y115.126 E0.00421 ; perimeter
G1 X105.703 Y115.050 E0.01301 ; perimeter
G1 X106.267 Y114.407 E0.02894 ; perimeter
G1 X106.149 Y113.720 E0.02360 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.179 Y114.363 E-0.32041 ; wipe and retract
G1 X107.698 Y114.582 E-0.14853 ; wipe and retract
G1 X108.252 Y114.583 E-0.14628 ; wipe and retract
G1 X108.662 Y114.392 E-0.11930 ; wipe and retract
G1 X108.409 Y114.736 E-0.11246 ; wipe and retract
G1 X108.446 Y115.111 E-0.09941 ; wipe and retract
G1 X107.556 Y115.177 E-0.23559 ; wipe and retract
G1 X104.968 Y115.196 E-0.68297 ; wipe and retract
G1 X105.214 Y115.178 E-0.06514 ; wipe and retract
G1 X105.327 Y115.126 E-0.03281 ; wipe and retract
G1 X105.703 Y115.050 E-0.10142 ; wipe and retract
G1 X106.242 Y114.435 E-0.21568 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X99.245 Y106.799 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.349 Y106.439 E0.01269 ; perimeter
G1 X99.182 Y106.250 E0.00854 ; perimeter
G1 X99.669 Y106.225 E0.01651 ; perimeter
G1 X99.847 Y106.162 E0.00637 ; perimeter
G1 X99.370 Y106.636 E0.02275 ; perimeter
G1 X99.282 Y106.752 E0.00492 ; perimeter
G1 X98.145 Y108.360 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X98.014 Y108.868 E0.01774 ; perimeter
G1 X97.962 Y109.233 E0.01249 ; perimeter
G1 X97.709 Y108.581 E0.02365 ; perimeter
G1 X97.611 Y108.552 E0.00348 ; perimeter
G1 X98.102 Y108.402 E0.01736 ; perimeter
G1 X97.978 Y110.381 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X98.352 Y110.909 E0.02191 ; perimeter
G1 X98.231 Y110.889 E0.00415 ; perimeter
G1 X97.690 Y111.001 E0.01871 ; perimeter
G1 X97.838 Y110.850 E0.00715 ; perimeter
G1 X97.961 Y110.438 E0.01456 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.352 Y110.909 E-0.16151 ; wipe and retract
G1 X98.231 Y110.889 E-0.03238 ; wipe and retract
G1 X97.690 Y111.001 E-0.14585 ; wipe and retract
G1 X97.838 Y110.850 E-0.05577 ; wipe and retract
G1 X97.961 Y110.438 E-0.11353 ; wipe and retract
;WIPE_END
G1 E-1.89096 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X105.753 Y114.262 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.448 Y114.609 E0.02140 ; perimeter
G1 X105.175 Y114.664 E0.01291 ; perimeter
G1 X105.091 Y114.704 E0.00432 ; perimeter
G1 X103.498 Y114.820 E0.07398 ; perimeter
G1 X103.350 Y114.868 E0.00718 ; perimeter
G1 X102.069 Y114.917 E0.05940 ; perimeter
G1 X96.588 Y115.012 E0.25390 ; perimeter
G1 X96.149 Y114.881 E0.02122 ; perimeter
G1 X95.876 Y114.691 E0.01543 ; perimeter
G1 X95.777 Y114.502 E0.00988 ; perimeter
G1 X95.671 Y114.359 E0.00826 ; perimeter
G1 X95.551 Y114.118 E0.01247 ; perimeter
G1 X95.459 Y113.733 E0.01831 ; perimeter
G1 X95.582 Y113.261 E0.02260 ; perimeter
G1 X96.103 Y112.774 E0.03301 ; perimeter
G1 X96.643 Y112.364 E0.03141 ; perimeter
G1 X97.188 Y111.900 E0.03315 ; perimeter
G1 X97.724 Y111.485 E0.03140 ; perimeter
G1 X98.249 Y111.380 E0.02479 ; perimeter
G1 X99.521 Y111.593 E0.05976 ; perimeter
G1 X100.020 Y111.728 E0.02395 ; perimeter
G1 X101.401 Y112.041 E0.06557 ; perimeter
G1 X102.446 Y112.250 E0.04937 ; perimeter
G1 X104.097 Y112.684 E0.07907 ; perimeter
G1 X104.281 Y112.775 E0.00955 ; perimeter
G1 X105.539 Y113.635 E0.07058 ; perimeter
G1 X105.670 Y113.781 E0.00907 ; perimeter
G1 X105.743 Y114.203 E0.01984 ; perimeter
G1 X106.004 Y114.574 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.448 Y114.609 E-0.13243 ; wipe and retract
G1 X105.175 Y114.664 E-0.07354 ; wipe and retract
G1 X105.091 Y114.704 E-0.02464 ; wipe and retract
G1 X103.498 Y114.820 E-0.42147 ; wipe and retract
G1 X103.350 Y114.868 E-0.04092 ; wipe and retract
G1 X102.069 Y114.917 E-0.33842 ; wipe and retract
G1 X97.338 Y114.999 E-1.24859 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X95.128 Y113.093 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X94.982 Y113.652 E0.01954 ; perimeter
G1 X94.873 Y113.434 E0.00825 ; perimeter
G1 X94.868 Y113.365 E0.00237 ; perimeter
G1 X94.884 Y113.316 E0.00173 ; perimeter
G1 X94.965 Y113.214 E0.00441 ; perimeter
G1 X95.075 Y113.121 E0.00487 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.982 Y113.652 E-0.14216 ; wipe and retract
G1 X94.873 Y113.434 E-0.06432 ; wipe and retract
G1 X94.868 Y113.365 E-0.01845 ; wipe and retract
G1 X94.884 Y113.316 E-0.01351 ; wipe and retract
G1 X94.965 Y113.214 E-0.03436 ; wipe and retract
G1 X95.075 Y113.121 E-0.03796 ; wipe and retract
;WIPE_END
G1 E-2.08925 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X97.345 Y108.975 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X97.095 Y108.900 E0.01211 ; perimeter
G1 X96.667 Y108.670 E0.02250 ; perimeter
G1 X96.679 Y108.605 E0.00309 ; perimeter
G1 X96.832 Y108.441 E0.01037 ; perimeter
G1 X97.409 Y108.109 E0.03085 ; perimeter
G1 X97.849 Y107.975 E0.02128 ; perimeter
G1 X98.224 Y107.608 E0.02431 ; perimeter
G1 X98.555 Y107.203 E0.02422 ; perimeter
G1 X98.683 Y107.008 E0.01080 ; perimeter
G1 X98.812 Y106.560 E0.02162 ; perimeter
G1 X98.708 Y106.442 E0.00730 ; perimeter
G1 X98.660 Y106.160 E0.01323 ; perimeter
G1 X98.578 Y106.058 E0.00608 ; perimeter
G1 X98.527 Y105.815 E0.01151 ; perimeter
G1 X98.835 Y105.747 E0.01462 ; perimeter
G1 X99.088 Y105.777 E0.01177 ; perimeter
G1 X99.239 Y105.753 E0.00711 ; perimeter
G1 X99.581 Y105.744 E0.01586 ; perimeter
G1 X100.036 Y105.585 E0.02231 ; perimeter
G1 X102.431 Y103.730 E0.14035 ; perimeter
G1 X102.894 Y103.331 E0.02827 ; perimeter
G1 X102.993 Y103.140 E0.00997 ; perimeter
G1 X103.097 Y103.014 E0.00758 ; perimeter
G1 X103.145 Y102.548 E0.02173 ; perimeter
G1 X103.051 Y101.980 E0.02665 ; perimeter
G1 X102.736 Y101.627 E0.02192 ; perimeter
G1 X102.217 Y101.655 E0.02410 ; perimeter
G1 X101.903 Y101.833 E0.01670 ; perimeter
G1 X101.422 Y102.213 E0.02838 ; perimeter
G1 X100.917 Y102.685 E0.03202 ; perimeter
G1 X100.362 Y103.122 E0.03271 ; perimeter
G1 X100.020 Y103.286 E0.01758 ; perimeter
G1 X99.942 Y103.301 E0.00369 ; perimeter
G1 X99.888 Y103.283 E0.00264 ; perimeter
G1 X99.845 Y103.232 E0.00309 ; perimeter
G1 X99.853 Y103.106 E0.00587 ; perimeter
G1 X99.905 Y102.976 E0.00645 ; perimeter
G1 X100.227 Y102.430 E0.02936 ; perimeter
G1 X100.534 Y102.020 E0.02375 ; perimeter
G1 X101.221 Y101.223 E0.04872 ; perimeter
G1 X101.642 Y100.821 E0.02697 ; perimeter
G1 X101.968 Y100.569 E0.01911 ; perimeter
G1 X102.781 Y100.111 E0.04322 ; perimeter
G1 X103.343 Y99.763 E0.03060 ; perimeter
G1 X103.548 Y99.596 E0.01225 ; perimeter
G1 X104.022 Y99.064 E0.03300 ; perimeter
G1 X104.281 Y98.617 E0.02394 ; perimeter
G1 X104.450 Y98.141 E0.02341 ; perimeter
G1 X104.601 Y97.860 E0.01476 ; perimeter
G1 X104.808 Y97.641 E0.01395 ; perimeter
G1 X105.056 Y97.529 E0.01260 ; perimeter
G1 X105.795 Y97.327 E0.03552 ; perimeter
G1 X105.970 Y97.208 E0.00979 ; perimeter
G1 X106.355 Y96.864 E0.02395 ; perimeter
G1 X106.706 Y96.488 E0.02380 ; perimeter
G1 X106.978 Y96.260 E0.01646 ; perimeter
G1 X108.417 Y95.701 E0.07151 ; perimeter
G1 X109.240 Y95.306 E0.04227 ; perimeter
G1 X109.628 Y95.065 E0.02117 ; perimeter
G1 X110.064 Y94.666 E0.02739 ; perimeter
G1 X110.584 Y94.293 E0.02962 ; perimeter
G1 X110.715 Y94.248 E0.00643 ; perimeter
G1 X110.933 Y94.243 E0.01008 ; perimeter
G1 X111.229 Y94.315 E0.01410 ; perimeter
G1 X111.413 Y94.399 E0.00939 ; perimeter
G1 X111.496 Y94.489 E0.00568 ; perimeter
G1 X111.368 Y94.665 E0.01010 ; perimeter
G1 X111.171 Y94.829 E0.01186 ; perimeter
G1 X110.859 Y95.173 E0.02152 ; perimeter
G1 X111.024 Y95.435 E0.01437 ; perimeter
G1 X111.035 Y95.616 E0.00836 ; perimeter
G1 X111.458 Y95.977 E0.02576 ; perimeter
G1 X111.799 Y96.030 E0.01600 ; perimeter
G1 X111.961 Y96.085 E0.00790 ; perimeter
G1 X112.454 Y95.991 E0.02328 ; perimeter
G1 X113.606 Y95.560 E0.05696 ; perimeter
G1 X114.105 Y95.421 E0.02399 ; perimeter
G1 X114.294 Y95.310 E0.01017 ; perimeter
G1 X114.499 Y95.279 E0.00959 ; perimeter
G1 X114.720 Y95.524 E0.01529 ; perimeter
G1 X114.783 Y95.823 E0.01413 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X114.808 Y95.939 E0.00498 ; perimeter (bridge)
G1 X114.819 Y96.634 E0.02906 ; perimeter (bridge)
G1 X114.479 Y96.401 E0.01727 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X114.376 Y96.330 E0.00579 ; perimeter
G1 X114.153 Y96.273 E0.01064 ; perimeter
G1 X113.593 Y96.309 E0.02599 ; perimeter
G1 X113.051 Y96.608 E0.02869 ; perimeter
G1 X112.642 Y96.805 E0.02100 ; perimeter
G1 X112.161 Y97.133 E0.02698 ; perimeter
G1 X111.305 Y98.301 E0.06707 ; perimeter
G1 X110.687 Y99.277 E0.05351 ; perimeter
G1 X109.385 Y101.247 E0.10939 ; perimeter
G1 X109.281 Y101.758 E0.02416 ; perimeter
G1 X109.673 Y102.900 E0.05589 ; perimeter
G1 X110.819 Y106.021 E0.15401 ; perimeter
G1 X111.149 Y106.660 E0.03331 ; perimeter
G1 X111.565 Y106.992 E0.02466 ; perimeter
G1 X112.384 Y107.555 E0.04605 ; perimeter
G1 X113.002 Y107.962 E0.03426 ; perimeter
G1 X113.670 Y108.330 E0.03533 ; perimeter
G1 X114.178 Y108.257 E0.02378 ; perimeter
G1 X114.488 Y107.764 E0.02700 ; perimeter
G1 X114.659 Y107.214 E0.02664 ; perimeter
G1 X114.822 Y106.411 E0.03798 ; perimeter
G1 X115.012 Y104.437 E0.09185 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.100 Y103.518 E0.03860 ; perimeter (bridge)
G1 X115.156 Y103.289 E0.00982 ; perimeter (bridge)
G1 X115.230 Y102.810 E0.02026 ; perimeter (bridge)
G1 X115.258 Y102.981 E0.00721 ; perimeter (bridge)
G1 X115.353 Y104.193 E0.05083 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X115.446 Y106.314 E0.09835 ; perimeter
G1 X115.432 Y108.041 E0.08001 ; perimeter
G1 X115.357 Y109.358 E0.06111 ; perimeter
G1 X115.242 Y109.881 E0.02477 ; perimeter
G1 X114.908 Y110.037 E0.01706 ; perimeter
G1 X114.732 Y110.041 E0.00815 ; perimeter
G1 X114.640 Y110.091 E0.00487 ; perimeter
G1 X114.408 Y110.119 E0.01083 ; perimeter
G1 X113.996 Y110.421 E0.02364 ; perimeter
G1 X109.288 Y114.354 E0.28417 ; perimeter
G1 X108.907 Y114.873 E0.02981 ; perimeter
G1 X108.958 Y115.397 E0.02442 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X108.967 Y115.485 E0.00367 ; perimeter (bridge)
G1 X109.107 Y115.534 E0.00622 ; perimeter (bridge)
G1 X108.740 Y115.572 E0.01543 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X107.577 Y115.659 E0.05405 ; perimeter
G1 X105.386 Y115.685 E0.10147 ; perimeter
G1 X102.359 Y115.636 E0.14023 ; perimeter
G1 X97.626 Y115.650 E0.21923 ; perimeter
G1 X96.509 Y115.628 E0.05178 ; perimeter
G1 X95.941 Y115.557 E0.02650 ; perimeter
G1 X95.656 Y115.378 E0.01560 ; perimeter
G1 X95.204 Y114.806 E0.03380 ; perimeter
G1 X94.701 Y114.108 E0.03983 ; perimeter
G1 X94.499 Y113.791 E0.01742 ; perimeter
G1 X94.397 Y113.547 E0.01226 ; perimeter
G1 X94.381 Y113.305 E0.01124 ; perimeter
G1 X94.452 Y113.083 E0.01080 ; perimeter
G1 X94.618 Y112.877 E0.01226 ; perimeter
G1 X94.810 Y112.713 E0.01168 ; perimeter
G1 X95.234 Y112.501 E0.02195 ; perimeter
G1 X95.844 Y112.016 E0.03609 ; perimeter
G1 X96.934 Y111.082 E0.06649 ; perimeter
G1 X97.410 Y110.598 E0.03148 ; perimeter
G1 X97.568 Y110.069 E0.02556 ; perimeter
G1 X97.567 Y109.549 E0.02409 ; perimeter
G1 X97.367 Y109.031 E0.02572 ; perimeter
G1 X97.378 Y108.716 F10800.000 ; move inwards before travel
G1 X98.443 Y108.254 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343893
G1 F2400.000
G1 X98.390 Y108.024 E0.00590 ; infill
G1 X98.875 Y107.429 E0.01923 ; infill
;WIDTH:0.364887
G1 X99.039 Y107.199 E0.00756 ; infill
;WIDTH:0.373813
G1 X99.062 Y107.162 E0.00119 ; infill
G1 X98.961 Y106.926 E0.00706 ; infill
G1 X100.052 Y106.037 F10800.000 ; move to first infill point
;WIDTH:0.339114
G1 F2400.000
G1 X100.249 Y105.924 E0.00558 ; infill
G1 X102.681 Y104.029 E0.07594 ; infill
;WIDTH:0.365185
G1 X103.238 Y103.570 E0.01932 ; infill
G1 X104.504 Y102.764 F10800.000 ; move to first infill point
;WIDTH:0.325653
G1 F2400.000
G1 X104.975 Y102.825 E0.01118 ; infill
G1 X106.491 Y102.284 E0.03782 ; infill
;WIDTH:0.334589
G1 X107.366 Y101.995 E0.02235 ; infill
;WIDTH:0.357019
G1 X107.593 Y101.910 E0.00636 ; infill
;WIDTH:0.37065
G1 X107.647 Y101.894 E0.00152 ; infill
;WIDTH:0.399625
G1 X107.870 Y101.848 E0.00675 ; infill
;WIDTH:0.428598
G1 X108.093 Y101.803 E0.00730 ; infill
G1 X108.883 Y102.416 F10800.000 ; move to first infill point
;WIDTH:0.270313
G1 F2400.000
G1 X108.977 Y102.438 E0.00183 ; infill
;WIDTH:0.318706
G1 X109.072 Y102.460 E0.00222 ; infill
;WIDTH:0.344559
G1 X109.100 Y102.470 E0.00075 ; infill
G1 X110.369 Y105.932 E0.09248 ; infill
;WIDTH:0.367811
G1 X110.504 Y106.373 E0.01245 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.369 Y105.932 E-0.12163 ; wipe and retract
;WIPE_END
G1 E-2.27837 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X114.989 Y107.660 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.401853
G1 F2400.000
G1 X115.041 Y107.320 E0.01025 ; infill
;WIDTH:0.353885
G1 X115.066 Y107.094 E0.00589 ; infill
;WIDTH:0.309229
G1 X115.088 Y106.883 E0.00470 ; infill
;WIDTH:0.268397
G1 X115.110 Y106.672 E0.00398 ; infill
;WIDTH:0.227565
G1 X115.132 Y106.461 E0.00326 ; infill
;WIDTH:0.186731
G1 X115.139 Y106.320 E0.00169 ; infill
;WIDTH:0.173911
G1 X115.147 Y106.030 E0.00316 ; infill
;WIDTH:0.135416
G1 X115.154 Y105.740 E0.00223 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.147 Y106.030 E-0.07648 ; wipe and retract
;WIPE_END
G1 E-2.32352 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X108.833 Y101.032 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.28294
G1 F2400.000
G1 X109.082 Y100.979 E0.00507 ; infill
G1 X110.364 Y99.068 E0.04593 ; infill
G1 X111.350 Y97.558 E0.03599 ; infill
G1 X111.263 Y97.342 E0.00465 ; infill
G1 X112.337 Y96.269 F10800.000 ; move to first infill point
;WIDTH:0.350541
G1 F2400.000
G1 X112.568 Y96.386 E0.00663 ; infill
G1 X113.171 Y96.118 E0.01688 ; infill
;WIDTH:0.257262
G1 X113.517 Y95.965 E0.00674 ; infill
;WIDTH:0.288191
G1 X113.620 Y95.943 E0.00215 ; infill
;WIDTH:0.31912
G1 X113.723 Y95.920 E0.00242 ; infill
;WIDTH:0.365236
G1 X113.944 Y95.883 E0.00599 ; infill
;WIDTH:0.41135
G1 X114.164 Y95.846 E0.00685 ; infill
;WIDTH:0.433444
G1 X114.224 Y95.841 E0.00197 ; infill
;WIDTH:0.448515
G1 X114.254 Y95.840 E0.00098 ; infill
;WIDTH:0.486825
G1 X114.533 Y95.805 E0.01040 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.254 Y95.840 E-0.07434 ; wipe and retract
;WIPE_END
G1 E-2.32566 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X111.125 Y94.538 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.234741
G1 F2400.000
G1 X110.324 Y94.777 E0.01334 ; infill
G1 X109.241 Y95.724 F10800.000 ; move to first infill point
;WIDTH:0.291022
G1 F2400.000
G1 X108.910 Y95.862 E0.00740 ; infill
;WIDTH:0.27752
G1 X107.380 Y96.531 E0.03257 ; infill
;WIDTH:0.385538
G1 X107.198 Y96.631 E0.00594 ; infill
G1 X106.860 Y96.911 E0.01249 ; infill
;WIDTH:0.364378
G1 X106.726 Y97.030 E0.00479 ; infill
;WIDTH:0.331456
G1 X106.626 Y97.131 E0.00341 ; infill
;WIDTH:0.322071
G1 X105.977 Y97.711 E0.02021 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.626 Y97.131 E-0.22977 ; wipe and retract
;WIPE_END
G1 E-2.17023 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X101.605 Y101.483 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.442582
G1 F2400.000
G1 X101.385 Y101.693 E0.01011 ; infill
;WIDTH:0.40381
G1 X101.165 Y101.904 E0.00913 ; infill
;WIDTH:0.365035
G1 X100.992 Y102.084 E0.00671 ; infill
;WIDTH:0.337282
G1 X100.827 Y102.255 E0.00581 ; infill
;WIDTH:0.311513
G1 X100.685 Y102.414 E0.00475 ; infill
;WIDTH:0.273887
G1 X100.590 Y102.511 E0.00262 ; infill
;WIDTH:0.238478
G1 X100.494 Y102.609 E0.00222 ; infill
;WIDTH:0.20307
G1 X100.425 Y102.688 E0.00140 ; infill
;WIDTH:0.167687
G1 X100.356 Y102.767 E0.00109 ; infill
;WIDTH:0.132303
G1 X100.287 Y102.846 E0.00078 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.356 Y102.767 E-0.02767 ; wipe and retract
;WIPE_END
G1 E-2.37233 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 X103.824 Y112.174 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.389962
G1 F2400.000
G1 X103.481 Y112.103 E0.01011 ; infill
;WIDTH:0.362708
G1 X103.138 Y112.031 E0.00932 ; infill
;WIDTH:0.335454
G1 X102.536 Y111.879 E0.01510 ; infill
;WIDTH:0.322973
G1 X99.200 Y111.139 E0.07957 ; infill
G1 X98.720 Y111.011 E0.01157 ; infill
G1 X97.485 Y111.130 F10800.000 ; move to first infill point
;WIDTH:0.389949
G1 F2400.000
G1 X97.214 Y111.372 E0.01050 ; infill
;WIDTH:0.365025
G1 X96.943 Y111.593 E0.00937 ; infill
;WIDTH:0.347333
G1 X96.088 Y112.308 E0.02821 ; infill
;WIDTH:0.321695
G1 X95.441 Y112.846 E0.01950 ; infill
G1 X95.131 Y114.037 F10800.000 ; move to first infill point
;WIDTH:0.254143
G1 F2400.000
G1 X95.311 Y114.384 E0.00686 ; infill
;WIDTH:0.155502
G1 X95.658 Y114.901 E0.00583 ; infill
;WIDTH:0.17894
G1 X95.889 Y115.119 E0.00359 ; infill
G1 X96.014 Y115.199 E0.00168 ; infill
G1 X96.556 Y115.321 E0.00628 ; infill
;WIDTH:0.216817
G1 X97.629 Y115.322 E0.01551 ; infill
;WIDTH:0.248841
G1 X99.853 Y115.300 E0.03808 ; infill
;WIDTH:0.280927
G1 X102.080 Y115.277 E0.04407 ; infill
;WIDTH:0.290956
G1 X102.363 Y115.271 E0.00583 ; infill
;WIDTH:0.319419
G1 X102.886 Y115.265 E0.01203 ; infill
;WIDTH:0.347882
G1 X103.409 Y115.260 E0.01327 ; infill
;WIDTH:0.361185
G1 X103.465 Y115.254 E0.00149 ; infill
G1 X103.556 Y115.236 F10800.000 ; move to first infill point
;WIDTH:0.441542
G1 F2400.000
G1 X104.141 Y115.220 E0.01941 ; infill
;WIDTH:0.48389
G1 X104.727 Y115.203 E0.02148 ; infill
G1 X106.337 Y114.513 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.470951
G1 F3600.000
G1 X106.884 Y115.060 E0.02753 ; infill
G1 X107.302 Y114.853 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.223387
G1 F2400.000
G1 X107.656 Y114.875 E0.00532 ; infill
G1 X108.217 Y114.855 E0.00842 ; infill
G1 X108.848 Y114.240 F10800.000 ; move to first infill point
;WIDTH:0.331915
G1 F2400.000
G1 X109.012 Y114.069 E0.00568 ; infill
G1 X113.335 Y110.471 E0.13515 ; infill
;WIDTH:0.356296
G1 X113.594 Y110.209 E0.00961 ; infill
G1 X114.500 Y109.480 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.531415
G1 F3600.000
G1 X113.924 Y108.904 E0.03307 ; infill
G1 X113.092 Y108.484 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.388271
G1 F2400.000
G1 X112.802 Y108.304 E0.00978 ; infill
;WIDTH:0.353467
G1 X112.170 Y107.877 E0.01971 ; infill
;WIDTH:0.334803
G1 X111.503 Y107.434 E0.01942 ; infill
G1 X111.284 Y107.327 E0.00593 ; infill
G1 X110.249 Y107.522 F10800.000 ; move to first infill point
;WIDTH:0.248469
G1 F2400.000
G1 X110.045 Y107.486 E0.00354 ; infill
;WIDTH:0.343652
G1 X110.024 Y107.484 E0.00054 ; infill
G1 X107.021 Y109.973 E0.09754 ; infill
;WIDTH:0.318458
G1 X105.586 Y111.167 E0.04276 ; infill
G1 X105.073 Y111.640 E0.01600 ; infill
G1 X105.309 Y112.726 F10800.000 ; move to first infill point
;WIDTH:0.356136
G1 F2400.000
G1 X105.283 Y112.974 E0.00649 ; infill
G1 X105.842 Y113.360 E0.01768 ; infill
G1 X105.878 Y113.602 F10800.000 ; move to first infill point
;WIDTH:0.227557
G1 F2400.000
G1 X105.509 Y112.945 E0.01156 ; infill
;LAYER_CHANGE
;Z:1.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.878 Y113.602 E-0.19877 ; wipe and retract
;WIPE_END
G1 E-2.20123 F2400.000 ; retract
G1 Z1.075 F10800.000 ; lift Z
G1 Z1.200 ; move to next layer (5)
;AFTER_LAYER_CHANGE
;1.2
G1 Z1.275 ; lift Z
G1 X103.609 Y103.236 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.626 Y102.864 E0.01260 ; perimeter
G1 X103.660 Y102.718 E0.00509 ; perimeter
G1 X104.347 Y102.939 E0.02444 ; perimeter
G1 X103.738 Y103.162 E0.02196 ; perimeter
G1 X103.661 Y103.206 E0.00299 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.626 Y102.864 E-0.09074 ; wipe and retract
G1 X103.660 Y102.718 E-0.03969 ; wipe and retract
G1 X104.347 Y102.939 E-0.19054 ; wipe and retract
G1 X103.738 Y103.162 E-0.17117 ; wipe and retract
G1 X103.661 Y103.206 E-0.02331 ; wipe and retract
;WIPE_END
G1 E-1.88456 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X110.193 Y106.655 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.863 Y107.116 E0.02628 ; perimeter
G1 X109.331 Y107.598 E0.03327 ; perimeter
G1 X107.890 Y108.777 E0.08623 ; perimeter
G1 X106.957 Y109.582 E0.05705 ; perimeter
G1 X106.535 Y109.899 E0.02448 ; perimeter
G1 X105.706 Y110.615 E0.05072 ; perimeter
G1 X104.421 Y111.643 E0.07623 ; perimeter
G1 X103.701 Y111.771 E0.03390 ; perimeter
G1 X103.071 Y111.646 E0.02972 ; perimeter
G1 X101.182 Y111.202 E0.08992 ; perimeter
G1 X100.838 Y111.144 E0.01614 ; perimeter
G1 X100.339 Y111.018 E0.02382 ; perimeter
G1 X99.706 Y110.892 E0.02994 ; perimeter
G1 X99.030 Y110.717 E0.03233 ; perimeter
G1 X98.655 Y110.538 E0.01925 ; perimeter
G1 X98.368 Y110.139 E0.02276 ; perimeter
G1 X98.473 Y108.828 E0.06093 ; perimeter
G1 X98.568 Y108.521 E0.01489 ; perimeter
G1 X98.789 Y108.128 E0.02090 ; perimeter
G1 X99.821 Y106.797 E0.07799 ; perimeter
G1 X100.386 Y106.270 E0.03579 ; perimeter
G1 X103.387 Y103.919 E0.17660 ; perimeter
G1 X103.942 Y103.601 E0.02964 ; perimeter
G1 X106.842 Y102.540 E0.14303 ; perimeter
G1 X107.688 Y102.262 E0.04124 ; perimeter
G1 X108.235 Y102.156 E0.02580 ; perimeter
G1 X108.532 Y102.343 E0.01627 ; perimeter
G1 X108.664 Y102.475 E0.00863 ; perimeter
G1 X108.923 Y103.054 E0.02941 ; perimeter
G1 X109.378 Y104.293 E0.06110 ; perimeter
G1 X109.569 Y104.745 E0.02277 ; perimeter
G1 X109.675 Y105.093 E0.01685 ; perimeter
G1 X109.975 Y105.861 E0.03816 ; perimeter
G1 X110.060 Y106.243 E0.01815 ; perimeter
G1 X110.175 Y106.598 E0.01726 ; perimeter
G1 X110.458 Y106.955 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.863 Y107.116 E-0.15967 ; wipe and retract
G1 X109.331 Y107.598 E-0.18953 ; wipe and retract
G1 X107.890 Y108.777 E-0.49126 ; wipe and retract
G1 X106.957 Y109.582 E-0.32501 ; wipe and retract
G1 X106.535 Y109.899 E-0.13946 ; wipe and retract
G1 X105.706 Y110.615 E-0.28894 ; wipe and retract
G1 X104.421 Y111.643 E-0.43428 ; wipe and retract
G1 X103.701 Y111.771 E-0.19313 ; wipe and retract
G1 X103.482 Y111.727 E-0.05872 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X108.768 Y101.923 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.422 Y101.704 E0.01385 ; perimeter
G1 X108.831 Y101.425 E0.01678 ; perimeter
G1 X108.748 Y101.866 E0.01521 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.422 Y101.704 E-0.09592 ; wipe and retract
G1 X108.831 Y101.425 E-0.13078 ; wipe and retract
G1 X108.748 Y101.866 E-0.11858 ; wipe and retract
;WIPE_END
G1 E-2.05472 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X103.254 Y101.184 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.604 Y101.046 E0.02247 ; perimeter
G1 X102.120 Y101.150 E0.01678 ; perimeter
G1 X101.790 Y101.306 E0.01234 ; perimeter
G1 X102.257 Y100.831 E0.02253 ; perimeter
G1 X102.381 Y100.735 E0.00533 ; perimeter
G1 X102.634 Y100.591 E0.00985 ; perimeter
G1 X103.088 Y100.251 E0.01917 ; perimeter
G1 X103.359 Y100.083 E0.01079 ; perimeter
G1 X103.884 Y99.663 E0.02278 ; perimeter
G1 X104.159 Y99.400 E0.01286 ; perimeter
G1 X104.419 Y99.071 E0.01420 ; perimeter
G1 X104.623 Y98.651 E0.01580 ; perimeter
G1 X104.801 Y98.338 E0.01220 ; perimeter
G1 X105.036 Y98.075 E0.01191 ; perimeter
G1 X105.092 Y98.031 E0.00242 ; perimeter
G1 X105.360 Y97.913 E0.00992 ; perimeter
G1 X105.729 Y97.821 E0.01287 ; perimeter
G1 X104.144 Y99.556 E0.07956 ; perimeter
G1 X103.752 Y100.057 E0.02151 ; perimeter
G1 X103.471 Y100.590 E0.02040 ; perimeter
G1 X103.396 Y101.291 E0.02387 ; perimeter
G1 X103.402 Y101.482 E0.00645 ; perimeter
G1 X103.280 Y101.238 E0.00921 ; perimeter
G1 X104.006 Y102.323 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.968 Y102.068 E0.01192 ; perimeter
G1 X103.900 Y101.948 E0.00640 ; perimeter
G1 X103.879 Y101.309 E0.02962 ; perimeter
G1 X103.940 Y100.733 E0.02684 ; perimeter
G1 X104.158 Y100.320 E0.02162 ; perimeter
G1 X104.513 Y99.867 E0.02664 ; perimeter
G1 X105.955 Y98.274 E0.09956 ; perimeter
G1 X106.965 Y97.294 E0.06518 ; perimeter
G1 X107.649 Y96.800 E0.03906 ; perimeter
G1 X107.957 Y96.658 E0.01573 ; perimeter
G1 X108.191 Y96.472 E0.01386 ; perimeter
G1 X109.411 Y95.966 E0.06117 ; perimeter
G1 X110.090 Y95.986 E0.03145 ; perimeter
G1 X110.504 Y96.179 E0.02119 ; perimeter
G1 X110.688 Y96.291 E0.00994 ; perimeter
G1 X110.995 Y96.545 E0.01849 ; perimeter
G1 X111.185 Y96.983 E0.02211 ; perimeter
G1 X111.020 Y97.427 E0.02197 ; perimeter
G1 X110.770 Y97.867 E0.02340 ; perimeter
G1 X109.270 Y100.059 E0.12303 ; perimeter
G1 X109.127 Y100.337 E0.01448 ; perimeter
G1 X108.566 Y101.022 E0.04102 ; perimeter
G1 X108.153 Y101.304 E0.02319 ; perimeter
G1 X105.038 Y102.429 E0.15342 ; perimeter
G1 X104.572 Y102.505 E0.02187 ; perimeter
G1 X104.063 Y102.341 E0.02477 ; perimeter
G1 X103.749 Y102.340 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.968 Y102.068 E-0.07627 ; wipe and retract
G1 X103.900 Y101.948 E-0.03643 ; wipe and retract
G1 X103.879 Y101.309 E-0.16877 ; wipe and retract
G1 X103.940 Y100.733 E-0.15291 ; wipe and retract
G1 X104.158 Y100.320 E-0.12318 ; wipe and retract
G1 X104.513 Y99.867 E-0.15174 ; wipe and retract
G1 X105.955 Y98.274 E-0.56719 ; wipe and retract
G1 X106.965 Y97.294 E-0.37133 ; wipe and retract
G1 X107.649 Y96.800 E-0.22254 ; wipe and retract
G1 X107.957 Y96.658 E-0.08961 ; wipe and retract
G1 X108.191 Y96.472 E-0.07899 ; wipe and retract
G1 X109.035 Y96.122 E-0.24104 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X109.894 Y95.497 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.057 Y95.314 E0.00831 ; perimeter
G1 X110.519 Y94.874 E0.02159 ; perimeter
G1 X110.631 Y94.799 E0.00454 ; perimeter
G1 X110.478 Y95.423 E0.02174 ; perimeter
G1 X110.503 Y95.646 E0.00761 ; perimeter
G1 X110.204 Y95.507 E0.01118 ; perimeter
G1 X109.954 Y95.499 E0.00844 ; perimeter
G1 X111.521 Y96.545 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X111.873 Y96.646 E0.01241 ; perimeter
G1 X111.905 Y96.639 E0.00112 ; perimeter
G1 X111.664 Y96.875 E0.01142 ; perimeter
G1 X111.545 Y96.600 E0.01018 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.873 Y96.646 E-0.08752 ; wipe and retract
G1 X111.905 Y96.639 E-0.00876 ; wipe and retract
G1 X111.664 Y96.875 E-0.08907 ; wipe and retract
G1 X111.545 Y96.600 E-0.07935 ; wipe and retract
;WIPE_END
G1 E-2.13530 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X113.989 Y95.833 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.201 Y95.756 E0.00765 ; perimeter
G1 X114.437 Y95.618 E0.00923 ; perimeter
G1 X114.520 Y96.107 E0.01678 ; perimeter
G1 X114.048 Y95.821 E0.01870 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.201 Y95.756 E-0.04404 ; wipe and retract
G1 X114.437 Y95.618 E-0.07192 ; wipe and retract
G1 X114.520 Y96.107 E-0.13081 ; wipe and retract
G1 X114.048 Y95.821 E-0.14582 ; wipe and retract
;WIPE_END
G1 E-2.00740 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X115.058 Y107.361 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.077 Y109.770 E0.08157 ; perimeter
G1 X114.321 Y109.682 E0.02574 ; perimeter
G1 X113.865 Y109.965 E0.01819 ; perimeter
G1 X113.947 Y109.618 E0.01205 ; perimeter
G1 X113.905 Y109.123 E0.01682 ; perimeter
G1 X113.694 Y108.880 E0.01090 ; perimeter
G1 X113.973 Y108.787 E0.00995 ; perimeter
G1 X114.364 Y108.782 E0.01326 ; perimeter
G1 X114.872 Y108.047 E0.03024 ; perimeter
G1 X115.042 Y107.419 E0.02203 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.077 Y109.770 E-0.62069 ; wipe and retract
G1 X114.321 Y109.682 E-0.20067 ; wipe and retract
G1 X113.865 Y109.965 E-0.14181 ; wipe and retract
G1 X113.947 Y109.618 E-0.09398 ; wipe and retract
G1 X113.905 Y109.123 E-0.13117 ; wipe and retract
G1 X113.694 Y108.880 E-0.08499 ; wipe and retract
G1 X113.973 Y108.787 E-0.07761 ; wipe and retract
G1 X114.364 Y108.782 E-0.10334 ; wipe and retract
G1 X114.872 Y108.047 E-0.23577 ; wipe and retract
G1 X115.042 Y107.419 E-0.17172 ; wipe and retract
;WIPE_END
G1 E-0.53826 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X113.438 Y109.320 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.461 Y109.589 E0.01251 ; perimeter
G1 X113.427 Y109.756 E0.00787 ; perimeter
G1 X113.317 Y109.932 E0.00960 ; perimeter
G1 X113.154 Y110.113 E0.01132 ; perimeter
G1 X112.640 Y110.575 E0.03198 ; perimeter
G1 X112.095 Y110.996 E0.03192 ; perimeter
G1 X110.940 Y111.978 E0.07024 ; perimeter
G1 X110.370 Y112.430 E0.03368 ; perimeter
G1 X108.701 Y113.830 E0.10090 ; perimeter
G1 X108.061 Y114.127 E0.03270 ; perimeter
G1 X107.544 Y114.016 E0.02447 ; perimeter
G1 X107.278 Y113.884 E0.01374 ; perimeter
G1 X105.970 Y112.999 E0.07317 ; perimeter
G1 X105.461 Y112.599 E0.03001 ; perimeter
G1 X105.299 Y112.089 E0.02479 ; perimeter
G1 X105.492 Y111.711 E0.01964 ; perimeter
G1 X106.667 Y110.744 E0.07049 ; perimeter
G1 X107.179 Y110.288 E0.03174 ; perimeter
G1 X107.590 Y109.984 E0.02370 ; perimeter
G1 X108.627 Y109.108 E0.06286 ; perimeter
G1 X109.347 Y108.530 E0.04280 ; perimeter
G1 X110.213 Y107.771 E0.05333 ; perimeter
G1 X110.487 Y107.687 E0.01329 ; perimeter
G1 X110.647 Y107.592 E0.00859 ; perimeter
G1 X111.256 Y107.719 E0.02881 ; perimeter
G1 X111.672 Y107.974 E0.02261 ; perimeter
G1 X112.596 Y108.638 E0.05270 ; perimeter
G1 X112.903 Y108.824 E0.01660 ; perimeter
G1 X113.263 Y109.118 E0.02155 ; perimeter
G1 X113.399 Y109.275 E0.00960 ; perimeter
G1 X113.703 Y109.372 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.461 Y109.589 E-0.08461 ; wipe and retract
G1 X113.427 Y109.756 E-0.04481 ; wipe and retract
G1 X113.317 Y109.932 E-0.05466 ; wipe and retract
G1 X113.154 Y110.113 E-0.06447 ; wipe and retract
G1 X112.640 Y110.575 E-0.18221 ; wipe and retract
G1 X112.095 Y110.996 E-0.18184 ; wipe and retract
G1 X110.940 Y111.978 E-0.40013 ; wipe and retract
G1 X110.370 Y112.430 E-0.19187 ; wipe and retract
G1 X108.701 Y113.830 E-0.57480 ; wipe and retract
G1 X108.061 Y114.127 E-0.18629 ; wipe and retract
G1 X107.544 Y114.016 E-0.13941 ; wipe and retract
G1 X107.278 Y113.884 E-0.07825 ; wipe and retract
G1 X106.975 Y113.679 E-0.09664 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X110.941 Y107.161 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.563 Y107.082 E0.01309 ; perimeter
G1 X110.420 Y107.167 E0.00561 ; perimeter
G1 X110.657 Y106.836 E0.01377 ; perimeter
G1 X110.753 Y107.004 E0.00655 ; perimeter
G1 X110.895 Y107.123 E0.00629 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.563 Y107.082 E-0.08842 ; wipe and retract
G1 X110.420 Y107.167 E-0.04374 ; wipe and retract
G1 X110.657 Y106.836 E-0.10736 ; wipe and retract
G1 X110.753 Y107.004 E-0.05110 ; wipe and retract
G1 X110.895 Y107.123 E-0.04904 ; wipe and retract
;WIPE_END
G1 E-2.06035 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X108.711 Y114.357 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.614 Y114.639 E0.01010 ; perimeter
G1 X108.630 Y115.056 E0.01412 ; perimeter
G1 X108.723 Y115.318 E0.00943 ; perimeter
G1 X107.108 Y115.354 E0.05469 ; perimeter
G1 X103.438 Y115.289 E0.12424 ; perimeter
G1 X104.107 Y115.233 E0.02272 ; perimeter
G1 X105.346 Y115.176 E0.04199 ; perimeter
G1 X106.177 Y114.720 E0.03210 ; perimeter
G1 X106.326 Y113.960 E0.02624 ; perimeter
G1 X106.219 Y113.749 E0.00799 ; perimeter
G1 X107.035 Y114.302 E0.03335 ; perimeter
G1 X107.384 Y114.475 E0.01318 ; perimeter
G1 X108.117 Y114.632 E0.02538 ; perimeter
G1 X108.657 Y114.382 E0.02013 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.614 Y114.639 E-0.06870 ; wipe and retract
G1 X108.630 Y115.056 E-0.11008 ; wipe and retract
G1 X108.723 Y115.318 E-0.07349 ; wipe and retract
G1 X107.108 Y115.354 E-0.42635 ; wipe and retract
G1 X103.438 Y115.289 E-0.96859 ; wipe and retract
G1 X104.107 Y115.233 E-0.17713 ; wipe and retract
G1 X105.346 Y115.176 E-0.32732 ; wipe and retract
G1 X105.772 Y114.942 E-0.12834 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X104.959 Y112.611 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.709 Y112.438 E0.01030 ; perimeter
G1 X104.180 Y112.176 E0.01996 ; perimeter
G1 X104.626 Y112.097 E0.01534 ; perimeter
G1 X104.841 Y111.925 E0.00930 ; perimeter
G1 X104.779 Y112.045 E0.00458 ; perimeter
G1 X104.941 Y112.554 E0.01805 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.709 Y112.438 E-0.06850 ; wipe and retract
G1 X104.180 Y112.176 E-0.15561 ; wipe and retract
G1 X104.626 Y112.097 E-0.11959 ; wipe and retract
G1 X104.841 Y111.925 E-0.07253 ; wipe and retract
G1 X104.779 Y112.045 E-0.03571 ; wipe and retract
G1 X104.941 Y112.554 E-0.14072 ; wipe and retract
;WIPE_END
G1 E-1.80735 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X99.219 Y106.787 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.308 Y106.429 E0.01246 ; perimeter
G1 X99.095 Y106.189 E0.01086 ; perimeter
G1 X99.712 Y106.240 E0.02094 ; perimeter
G1 X99.464 Y106.471 E0.01148 ; perimeter
G1 X99.255 Y106.739 E0.01150 ; perimeter
G1 X98.117 Y108.345 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X97.997 Y108.736 E0.01386 ; perimeter
G1 X97.963 Y109.159 E0.01434 ; perimeter
G1 X97.868 Y109.037 E0.00522 ; perimeter
G1 X97.737 Y108.685 E0.01270 ; perimeter
G1 X97.440 Y108.586 E0.01061 ; perimeter
G1 X97.978 Y108.435 E0.01894 ; perimeter
G1 X98.067 Y108.378 E0.00357 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.997 Y108.736 E-0.09645 ; wipe and retract
G1 X97.963 Y109.159 E-0.11178 ; wipe and retract
G1 X97.868 Y109.037 E-0.04071 ; wipe and retract
G1 X97.737 Y108.685 E-0.09901 ; wipe and retract
G1 X97.440 Y108.586 E-0.08272 ; wipe and retract
G1 X97.978 Y108.435 E-0.14767 ; wipe and retract
G1 X98.067 Y108.378 E-0.02781 ; wipe and retract
;WIPE_END
G1 E-1.79385 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X98.025 Y110.489 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.296 Y110.864 E0.01565 ; perimeter
G1 X98.131 Y110.848 E0.00559 ; perimeter
G1 X97.800 Y110.956 E0.01181 ; perimeter
G1 X97.877 Y110.740 E0.00777 ; perimeter
G1 X97.995 Y110.540 E0.00785 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.296 Y110.864 E-0.11656 ; wipe and retract
G1 X98.131 Y110.848 E-0.04360 ; wipe and retract
G1 X97.800 Y110.956 E-0.09211 ; wipe and retract
G1 X97.877 Y110.740 E-0.06057 ; wipe and retract
G1 X97.995 Y110.540 E-0.06123 ; wipe and retract
;WIPE_END
G1 E-2.02593 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X105.748 Y114.406 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.212 Y114.699 E0.02829 ; perimeter
G1 X104.075 Y114.751 E0.05271 ; perimeter
G1 X102.847 Y114.855 E0.05709 ; perimeter
G1 X101.730 Y114.885 E0.05179 ; perimeter
G1 X96.869 Y114.934 E0.22516 ; perimeter
G1 X96.060 Y114.743 E0.03852 ; perimeter
G1 X95.741 Y114.364 E0.02293 ; perimeter
G1 X95.643 Y114.175 E0.00987 ; perimeter
G1 X95.519 Y113.826 E0.01715 ; perimeter
G1 X95.599 Y113.323 E0.02361 ; perimeter
G1 X95.860 Y113.051 E0.01748 ; perimeter
G1 X95.901 Y112.968 E0.00428 ; perimeter
G1 X96.081 Y112.838 E0.01031 ; perimeter
G1 X97.257 Y111.828 E0.07182 ; perimeter
G1 X97.744 Y111.457 E0.02833 ; perimeter
G1 X97.910 Y111.427 E0.00783 ; perimeter
G1 X98.185 Y111.337 E0.01340 ; perimeter
G1 X98.829 Y111.399 E0.02992 ; perimeter
G1 X99.198 Y111.501 E0.01774 ; perimeter
G1 X99.742 Y111.610 E0.02572 ; perimeter
G1 X101.505 Y112.027 E0.08390 ; perimeter
G1 X103.113 Y112.376 E0.07622 ; perimeter
G1 X103.968 Y112.608 E0.04104 ; perimeter
G1 X104.463 Y112.854 E0.02561 ; perimeter
G1 X105.636 Y113.665 E0.06605 ; perimeter
G1 X105.821 Y114.030 E0.01897 ; perimeter
G1 X105.759 Y114.347 E0.01496 ; perimeter
G1 X105.898 Y114.777 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.212 Y114.699 E-0.17175 ; wipe and retract
G1 X104.075 Y114.751 E-0.30027 ; wipe and retract
G1 X102.847 Y114.855 E-0.32523 ; wipe and retract
G1 X101.730 Y114.885 E-0.29502 ; wipe and retract
G1 X97.229 Y114.930 E-1.18773 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X95.303 Y112.935 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.147 Y113.098 E0.00762 ; perimeter
G1 X95.034 Y113.808 E0.02433 ; perimeter
G1 X94.945 Y113.687 E0.00508 ; perimeter
G1 X94.889 Y113.556 E0.00479 ; perimeter
G1 X94.811 Y113.314 E0.00861 ; perimeter
G1 X94.801 Y113.180 E0.00455 ; perimeter
G1 X94.845 Y113.077 E0.00380 ; perimeter
G1 X94.900 Y113.082 E0.00187 ; perimeter
G1 X95.246 Y112.956 E0.01248 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.147 Y113.098 E-0.04571 ; wipe and retract
G1 X95.034 Y113.808 E-0.18967 ; wipe and retract
G1 X94.945 Y113.687 E-0.03964 ; wipe and retract
G1 X94.889 Y113.556 E-0.03732 ; wipe and retract
G1 X94.811 Y113.314 E-0.06711 ; wipe and retract
G1 X94.801 Y113.180 E-0.03544 ; wipe and retract
G1 X94.845 Y113.077 E-0.02961 ; wipe and retract
G1 X94.900 Y113.082 E-0.01461 ; wipe and retract
G1 X95.246 Y112.956 E-0.09727 ; wipe and retract
;WIPE_END
G1 E-1.84361 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X97.594 Y109.470 ; move to first perimeter point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X97.442 Y109.274 E0.01152 ; perimeter
G1 X97.366 Y109.070 E0.01007 ; perimeter
G1 X96.973 Y108.940 E0.01921 ; perimeter
G1 X96.365 Y108.842 E0.02851 ; perimeter
G1 X96.222 Y108.763 E0.00756 ; perimeter
G1 X96.220 Y108.699 E0.00297 ; perimeter
G1 X96.368 Y108.534 E0.01028 ; perimeter
G1 X96.555 Y108.454 E0.00945 ; perimeter
G1 X96.998 Y108.210 E0.02341 ; perimeter
G1 X97.778 Y107.991 E0.03754 ; perimeter
G1 X98.077 Y107.798 E0.01647 ; perimeter
G1 X98.346 Y107.518 E0.01798 ; perimeter
G1 X98.653 Y107.113 E0.02353 ; perimeter
G1 X98.748 Y106.899 E0.01086 ; perimeter
G1 X98.711 Y106.786 E0.00550 ; perimeter
G1 X98.774 Y106.554 E0.01113 ; perimeter
G1 X98.582 Y106.336 E0.01347 ; perimeter
G1 X98.568 Y106.254 E0.00388 ; perimeter
G1 X98.369 Y106.045 E0.01333 ; perimeter
G1 X98.197 Y105.810 E0.01351 ; perimeter
G1 X98.175 Y105.695 E0.00541 ; perimeter
G1 X98.194 Y105.646 E0.00246 ; perimeter
G1 X98.260 Y105.605 E0.00355 ; perimeter
G1 X98.596 Y105.568 E0.01569 ; perimeter
G1 X98.893 Y105.622 E0.01399 ; perimeter
G1 X99.165 Y105.711 E0.01326 ; perimeter
G1 X99.654 Y105.751 E0.02273 ; perimeter
G1 X100.101 Y105.565 E0.02240 ; perimeter
G1 X100.615 Y105.195 E0.02936 ; perimeter
G1 X101.290 Y104.649 E0.04019 ; perimeter
G1 X102.538 Y103.691 E0.07292 ; perimeter
G1 X102.874 Y103.402 E0.02050 ; perimeter
G1 X103.134 Y103.075 E0.01936 ; perimeter
G1 X103.146 Y102.798 E0.01284 ; perimeter
G1 X103.196 Y102.587 E0.01005 ; perimeter
G1 X103.129 Y101.910 E0.03151 ; perimeter
G1 X103.035 Y101.824 E0.00591 ; perimeter
G1 X102.926 Y101.607 E0.01122 ; perimeter
G1 X102.605 Y101.539 E0.01521 ; perimeter
G1 X102.276 Y101.610 E0.01559 ; perimeter
G1 X101.789 Y101.840 E0.02495 ; perimeter
G1 X101.488 Y102.098 E0.01839 ; perimeter
G1 X101.267 Y102.372 E0.01628 ; perimeter
G1 X101.069 Y102.559 E0.01261 ; perimeter
G1 X100.741 Y102.920 E0.02261 ; perimeter
G1 X100.192 Y103.402 E0.03385 ; perimeter
G1 X99.959 Y103.530 E0.01230 ; perimeter
G1 X99.665 Y103.602 E0.01399 ; perimeter
G1 X99.614 Y103.581 E0.00257 ; perimeter
G1 X99.571 Y103.493 E0.00452 ; perimeter
G1 X99.616 Y103.226 E0.01256 ; perimeter
G1 X99.827 Y102.841 E0.02033 ; perimeter
G1 X100.232 Y102.329 E0.03025 ; perimeter
G1 X101.081 Y101.410 E0.05793 ; perimeter
G1 X101.466 Y100.942 E0.02809 ; perimeter
G1 X101.937 Y100.469 E0.03090 ; perimeter
G1 X102.113 Y100.333 E0.01031 ; perimeter
G1 X102.369 Y100.187 E0.01367 ; perimeter
G1 X102.816 Y99.852 E0.02584 ; perimeter
G1 X103.081 Y99.689 E0.01442 ; perimeter
G1 X103.566 Y99.300 E0.02880 ; perimeter
G1 X103.801 Y99.075 E0.01507 ; perimeter
G1 X104.008 Y98.813 E0.01548 ; perimeter
G1 X104.196 Y98.426 E0.01993 ; perimeter
G1 X104.408 Y98.055 E0.01978 ; perimeter
G1 X104.705 Y97.721 E0.02070 ; perimeter
G1 X104.843 Y97.615 E0.00808 ; perimeter
G1 X105.203 Y97.455 E0.01825 ; perimeter
G1 X105.791 Y97.309 E0.02804 ; perimeter
G1 X106.060 Y97.176 E0.01390 ; perimeter
G1 X106.404 Y96.881 E0.02102 ; perimeter
G1 X106.479 Y96.759 E0.00659 ; perimeter
G1 X106.759 Y96.425 E0.02021 ; perimeter
G1 X107.006 Y96.230 E0.01461 ; perimeter
G1 X107.195 Y96.158 E0.00937 ; perimeter
G1 X107.594 Y96.116 E0.01856 ; perimeter
G1 X109.089 Y95.496 E0.07497 ; perimeter
G1 X109.540 Y95.171 E0.02576 ; perimeter
G1 X109.710 Y94.979 E0.01187 ; perimeter
G1 X110.217 Y94.496 E0.03241 ; perimeter
G1 X110.676 Y94.188 E0.02563 ; perimeter
G1 X110.871 Y94.156 E0.00914 ; perimeter
G1 X111.238 Y94.160 E0.01700 ; perimeter
G1 X111.546 Y94.217 E0.01452 ; perimeter
G1 X111.876 Y94.367 E0.01681 ; perimeter
G1 X111.939 Y94.462 E0.00524 ; perimeter
G1 X111.784 Y94.606 E0.00980 ; perimeter
G1 X111.631 Y94.670 E0.00770 ; perimeter
G1 X111.465 Y94.802 E0.00979 ; perimeter
G1 X111.317 Y94.857 E0.00733 ; perimeter
G1 X111.054 Y95.074 E0.01579 ; perimeter
G1 X110.966 Y95.452 E0.01796 ; perimeter
G1 X110.997 Y95.726 E0.01276 ; perimeter
G1 X111.450 Y96.022 E0.02509 ; perimeter
G1 X111.888 Y96.149 E0.02112 ; perimeter
G1 X112.390 Y96.036 E0.02384 ; perimeter
G1 X113.617 Y95.498 E0.06205 ; perimeter
G1 X113.833 Y95.361 E0.01185 ; perimeter
G1 X114.009 Y95.310 E0.00847 ; perimeter
G1 X114.320 Y95.128 E0.01669 ; perimeter
G1 X114.482 Y94.962 E0.01077 ; perimeter
G1 X114.625 Y94.986 E0.00671 ; perimeter
G1 X114.772 Y95.154 E0.01033 ; perimeter
G1 X114.896 Y95.454 E0.01502 ; perimeter
G1 X114.984 Y95.911 E0.02158 ; perimeter
G1 X115.137 Y97.282 E0.06391 ; perimeter
G1 X115.150 Y97.620 E0.01567 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.180 Y98.684 E0.04448 ; perimeter (bridge)
G1 X115.153 Y98.571 E0.00488 ; perimeter (bridge)
G1 X115.056 Y98.444 E0.00666 ; perimeter (bridge)
G1 X114.973 Y98.093 E0.01507 ; perimeter (bridge)
G1 X114.789 Y97.603 E0.02186 ; perimeter (bridge)
G1 X114.769 Y97.488 E0.00490 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X114.699 Y97.098 E0.01834 ; perimeter
G1 X114.481 Y96.646 E0.02324 ; perimeter
G1 X113.963 Y96.333 E0.02805 ; perimeter
G1 X113.588 Y96.416 E0.01776 ; perimeter
G1 X113.491 Y96.419 E0.00449 ; perimeter
G1 X113.036 Y96.600 E0.02271 ; perimeter
G1 X112.422 Y96.880 E0.03124 ; perimeter
G1 X112.231 Y96.995 E0.01035 ; perimeter
G1 X111.975 Y97.246 E0.01662 ; perimeter
G1 X111.728 Y97.631 E0.02116 ; perimeter
G1 X111.268 Y98.268 E0.03638 ; perimeter
G1 X110.760 Y99.090 E0.04477 ; perimeter
G1 X109.492 Y101.018 E0.10689 ; perimeter
G1 X109.311 Y101.370 E0.01835 ; perimeter
G1 X109.320 Y101.495 E0.00582 ; perimeter
G1 X109.246 Y101.824 E0.01562 ; perimeter
G1 X110.835 Y106.177 E0.21464 ; perimeter
G1 X111.128 Y106.689 E0.02735 ; perimeter
G1 X111.486 Y106.988 E0.02162 ; perimeter
G1 X111.774 Y107.163 E0.01556 ; perimeter
G1 X112.287 Y107.524 E0.02910 ; perimeter
G1 X113.121 Y108.059 E0.04590 ; perimeter
G1 X113.718 Y108.363 E0.03103 ; perimeter
G1 X113.892 Y108.306 E0.00847 ; perimeter
G1 X114.109 Y108.303 E0.01009 ; perimeter
G1 X114.429 Y107.841 E0.02602 ; perimeter
G1 X114.650 Y107.025 E0.03915 ; perimeter
G1 X114.755 Y106.510 E0.02432 ; perimeter
G1 X114.827 Y104.656 E0.08598 ; perimeter
G1 X115.024 Y101.965 E0.12498 ; perimeter
G1 X115.089 Y101.488 E0.02227 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.138 Y100.787 E0.02938 ; perimeter (bridge)
G1 X115.215 Y100.299 E0.02066 ; perimeter (bridge)
G1 X115.281 Y100.093 E0.00903 ; perimeter (bridge)
G1 X115.350 Y100.666 E0.02409 ; perimeter (bridge)
G1 X115.395 Y101.339 E0.02820 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X115.470 Y102.460 E0.05205 ; perimeter
G1 X115.525 Y104.735 E0.10543 ; perimeter
G1 X115.525 Y106.100 E0.06323 ; perimeter
G1 X115.565 Y109.359 E0.15093 ; perimeter
G1 X115.540 Y110.416 E0.04901 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.440 Y111.493 E0.04519 ; perimeter (bridge)
G1 X115.394 Y111.191 E0.01278 ; perimeter (bridge)
G1 X115.329 Y111.061 E0.00605 ; perimeter (bridge)
G1 X115.263 Y110.629 E0.01829 ; perimeter (bridge)
G1 X115.144 Y110.478 E0.00801 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X114.956 Y110.242 E0.01400 ; perimeter
G1 X114.432 Y110.180 E0.02443 ; perimeter
G1 X113.863 Y110.532 E0.03100 ; perimeter
G1 X113.078 Y111.204 E0.04787 ; perimeter
G1 X112.222 Y111.885 E0.05067 ; perimeter
G1 X111.446 Y112.556 E0.04752 ; perimeter
G1 X110.914 Y112.974 E0.03135 ; perimeter
G1 X109.810 Y113.910 E0.06703 ; perimeter
G1 X109.214 Y114.379 E0.03513 ; perimeter
G1 X109.099 Y114.711 E0.01627 ; perimeter
G1 X109.109 Y114.964 E0.01174 ; perimeter
G1 X109.205 Y115.237 E0.01342 ; perimeter
G1 X109.603 Y115.308 E0.01871 ; perimeter
G1 X109.784 Y115.395 E0.00931 ; perimeter
G1 X109.854 Y115.396 E0.00323 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X110.901 Y115.414 E0.04377 ; perimeter (bridge)
G1 X111.898 Y115.517 E0.04192 ; perimeter (bridge)
G1 X110.471 Y115.714 E0.06022 ; perimeter (bridge)
G1 X110.134 Y115.732 E0.01410 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X108.890 Y115.797 E0.05774 ; perimeter
G1 X107.109 Y115.836 E0.08252 ; perimeter
G1 X102.059 Y115.746 E0.23394 ; perimeter
G1 X98.804 Y115.780 E0.15080 ; perimeter
G1 X96.410 Y115.780 E0.11088 ; perimeter
G1 X96.233 Y115.759 E0.00826 ; perimeter
G1 X95.954 Y115.689 E0.01333 ; perimeter
G1 X95.638 Y115.490 E0.01727 ; perimeter
G1 X95.437 Y115.241 E0.01486 ; perimeter
G1 X94.882 Y114.415 E0.04610 ; perimeter
G1 X94.523 Y113.927 E0.02804 ; perimeter
G1 X94.335 Y113.407 E0.02561 ; perimeter
G1 X94.326 Y113.075 E0.01541 ; perimeter
G1 X94.424 Y112.816 E0.01279 ; perimeter
G1 X94.516 Y112.709 E0.00654 ; perimeter
G1 X94.737 Y112.583 E0.01179 ; perimeter
G1 X94.836 Y112.592 E0.00459 ; perimeter
G1 X95.341 Y112.394 E0.02514 ; perimeter
G1 X95.639 Y112.173 E0.01719 ; perimeter
G1 X97.006 Y111.061 E0.08163 ; perimeter
G1 X97.378 Y110.703 E0.02390 ; perimeter
G1 X97.438 Y110.535 E0.00830 ; perimeter
G1 X97.563 Y110.324 E0.01135 ; perimeter
G1 X97.613 Y109.861 E0.02155 ; perimeter
G1 X97.597 Y109.530 E0.01534 ; perimeter
G1 X97.739 Y109.268 F10800.000 ; move inwards before travel
G1 X98.435 Y108.217 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.12291
G1 F2400.000
G1 X98.624 Y107.809 E0.00299 ; infill
;WIDTH:0.248448
G1 X98.646 Y107.721 E0.00155 ; infill
G1 X98.960 Y107.311 E0.00883 ; infill
G1 X99.075 Y107.123 E0.00376 ; infill
G1 X98.590 Y105.859 F10800.000 ; move to first infill point
;WIDTH:0.113087
G1 F2400.000
G1 X98.919 Y105.909 E0.00194 ; infill
G1 X100.046 Y106.025 F10800.000 ; move to first infill point
;WIDTH:0.264494
G1 F2400.000
G1 X100.292 Y105.879 E0.00528 ; infill
G1 X100.827 Y105.477 E0.01232 ; infill
G1 X102.763 Y103.962 E0.04529 ; infill
;WIDTH:0.289293
G1 X103.145 Y103.647 E0.01015 ; infill
;WIDTH:0.304469
G1 X103.187 Y103.606 E0.00128 ; infill
;WIDTH:0.318183
G1 X103.358 Y103.459 E0.00516 ; infill
G1 X104.588 Y102.923 F10800.000 ; move to first infill point
;WIDTH:0.278382
G1 F2400.000
G1 X105.140 Y102.777 E0.01117 ; infill
G1 X106.726 Y102.201 E0.03305 ; infill
;WIDTH:0.307976
G1 X107.623 Y101.893 E0.02090 ; infill
;WIDTH:0.33912
G1 X107.749 Y101.864 E0.00318 ; infill
;WIDTH:0.356503
G1 X107.876 Y101.827 E0.00346 ; infill
G1 X108.773 Y102.228 F10800.000 ; move to first infill point
;WIDTH:0.261382
G1 F2400.000
G1 X108.986 Y102.248 E0.00387 ; infill
G1 X108.999 Y102.276 E0.00056 ; infill
G1 X109.261 Y102.922 E0.01266 ; infill
G1 X110.312 Y105.766 E0.05509 ; infill
;WIDTH:0.286935
G1 X110.368 Y105.955 E0.00400 ; infill
;WIDTH:0.312487
G1 X110.423 Y106.144 E0.00441 ; infill
;WIDTH:0.322701
G1 X110.494 Y106.348 E0.00502 ; infill
;WIDTH:0.33014
G1 X110.576 Y106.533 E0.00485 ; infill
G1 X110.228 Y107.314 F10800.000 ; move to first infill point
;WIDTH:0.294111
G1 F2400.000
G1 X110.014 Y107.466 E0.00548 ; infill
;WIDTH:0.282422
G1 X109.565 Y107.866 E0.01198 ; infill
;WIDTH:0.272654
G1 X107.180 Y109.852 E0.05928 ; infill
;WIDTH:0.26056
G1 X106.761 Y110.179 E0.00962 ; infill
G1 X105.935 Y110.887 E0.01968 ; infill
G1 X105.224 Y111.464 E0.01657 ; infill
G1 X104.969 Y111.719 E0.00651 ; infill
G1 X105.093 Y112.811 F10800.000 ; move to first infill point
;WIDTH:0.301107
G1 F2400.000
G1 X105.896 Y113.395 E0.02132 ; infill
;WIDTH:0.318285
G1 X105.946 Y113.439 E0.00151 ; infill
;WIDTH:0.332285
G1 X106.060 Y113.569 E0.00416 ; infill
G1 X107.033 Y114.437 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.513518
G1 F3600.000
G1 X106.433 Y115.037 E0.03319 ; infill
G1 X107.087 Y115.048 E0.02559 ; infill
G1 X107.355 Y114.781 E0.01481 ; infill
G1 X107.903 Y114.898 E0.02193 ; infill
G1 X107.580 Y115.221 E0.01789 ; infill
G1 X109.043 Y115.500 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.126313
G1 F2400.000
G1 X109.243 Y115.513 E0.00139 ; infill
G1 X109.258 Y113.860 F10800.000 ; move to first infill point
;WIDTH:0.322978
G1 F2400.000
G1 X110.612 Y112.727 E0.04112 ; infill
G1 X111.202 Y112.260 E0.01752 ; infill
G1 X111.982 Y111.591 E0.02392 ; infill
G1 X112.888 Y110.864 E0.02706 ; infill
;WIDTH:0.342241
G1 X113.435 Y110.384 E0.01812 ; infill
;WIDTH:0.367892
G1 X113.693 Y110.133 E0.00970 ; infill
G1 X114.091 Y109.644 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.466119
G1 F3600.000
G1 X114.954 Y108.781 E0.04293 ; infill
G1 X113.444 Y108.709 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.379011
G1 F2400.000
G1 X113.139 Y108.509 E0.01020 ; infill
;WIDTH:0.34685
G1 X112.936 Y108.395 E0.00586 ; infill
;WIDTH:0.327966
G1 X112.087 Y107.826 E0.02423 ; infill
;WIDTH:0.285133
G1 X111.570 Y107.474 E0.01261 ; infill
G1 X111.294 Y107.328 E0.00628 ; infill
G1 X111.236 Y107.106 E0.00463 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.294 Y107.328 E-0.06064 ; wipe and retract
G1 X111.570 Y107.474 E-0.08225 ; wipe and retract
G1 X112.087 Y107.826 E-0.16518 ; wipe and retract
;WIPE_END
G1 E-2.09193 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X115.088 Y107.121 ; move to first infill point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.418815
G1 F2400.000
G1 X115.114 Y106.845 E0.00867 ; infill
;WIDTH:0.379661
G1 X115.141 Y106.569 E0.00777 ; infill
;WIDTH:0.340508
G1 X115.148 Y106.104 E0.01152 ; infill
;WIDTH:0.314589
G1 X115.161 Y105.421 E0.01543 ; infill
;WIDTH:0.288345
G1 X115.175 Y104.740 E0.01390 ; infill
;WIDTH:0.262179
G1 X115.186 Y104.255 E0.00884 ; infill
;WIDTH:0.21781
G1 X115.196 Y103.834 E0.00612 ; infill
;WIDTH:0.177513
G1 X115.206 Y103.413 E0.00471 ; infill
;WIDTH:0.137216
G1 X115.216 Y102.992 E0.00330 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.206 Y103.413 E-0.11106 ; wipe and retract
;WIPE_END
G1 E-2.28894 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X109.137 Y100.911 ; move to first infill point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.200424
G1 F2400.000
G1 X109.407 Y100.529 E0.00613 ; infill
G1 X109.577 Y100.242 E0.00437 ; infill
G1 X111.043 Y98.033 E0.03472 ; infill
;WIDTH:0.22941
G1 X111.188 Y97.808 E0.00415 ; infill
;WIDTH:0.261646
G1 X111.341 Y97.568 E0.00518 ; infill
;WIDTH:0.305997
G1 X111.420 Y97.421 E0.00364 ; infill
;WIDTH:0.322915
G1 X111.455 Y97.350 E0.00185 ; infill
G1 X112.126 Y96.540 F10800.000 ; move to first infill point
;WIDTH:0.336328
G1 F2400.000
G1 X112.526 Y96.403 E0.01032 ; infill
G1 X112.887 Y96.242 E0.00965 ; infill
;WIDTH:0.355619
G1 X113.384 Y96.034 E0.01401 ; infill
;WIDTH:0.367142
G1 X113.436 Y96.017 E0.00148 ; infill
;WIDTH:0.405565
G1 X113.535 Y95.995 E0.00306 ; infill
;WIDTH:0.416078
G1 X113.764 Y95.920 E0.00747 ; infill
G1 X114.754 Y96.530 F10800.000 ; move to first infill point
;WIDTH:0.132278
G1 F2400.000
G1 X114.809 Y96.720 E0.00147 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.754 Y96.530 E-0.05217 ; wipe and retract
;WIPE_END
G1 E-2.34783 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X111.500 Y94.466 ; move to first infill point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.296906
G1 F2400.000
G1 X111.151 Y94.527 E0.00749 ; infill
G1 X110.798 Y94.620 E0.00771 ; infill
G1 X109.542 Y95.496 F10800.000 ; move to first infill point
;WIDTH:0.123399
G1 F2400.000
G1 X109.344 Y95.674 E0.00178 ; infill
G1 X109.229 Y95.739 E0.00088 ; infill
G1 X108.054 Y96.227 E0.00852 ; infill
G1 X107.663 Y96.435 E0.00296 ; infill
;WIDTH:0.242533
G1 X106.847 Y96.695 E0.01421 ; infill
G1 X107.738 Y96.317 F10800.000 ; move to first infill point
;WIDTH:0.404944
G1 F2400.000
G1 X107.189 Y96.612 E0.01877 ; infill
G1 X107.055 Y96.718 E0.00513 ; infill
;WIDTH:0.390752
G1 X106.917 Y96.846 E0.00546 ; infill
;WIDTH:0.343878
G1 X106.778 Y96.975 E0.00473 ; infill
;WIDTH:0.297004
G1 X106.742 Y97.014 E0.00114 ; infill
;WIDTH:0.275811
G1 X106.678 Y97.093 E0.00196 ; infill
;WIDTH:0.249272
G1 X106.270 Y97.468 E0.00951 ; infill
G1 X106.093 Y97.595 E0.00374 ; infill
;WIDTH:0.352252
G1 X105.940 Y97.704 E0.00484 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.093 Y97.595 E-0.04968 ; wipe and retract
;WIPE_END
G1 E-2.35032 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X103.336 Y100.353 ; move to first infill point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.179646
G1 F2400.000
G1 X103.212 Y100.498 E0.00217 ; infill
G1 X102.927 Y100.906 E0.00567 ; infill
G1 X102.624 Y100.842 F10800.000 ; move to first infill point
;WIDTH:0.168617
G1 F2400.000
G1 X103.252 Y100.724 E0.00668 ; infill
G1 X103.501 Y101.705 F10800.000 ; move to first infill point
;WIDTH:0.332812
G1 F2400.000
G1 X103.522 Y102.020 E0.00760 ; infill
G1 X103.602 Y102.446 E0.01045 ; infill
G1 X103.602 Y102.445 F10800.000 ; move to first infill point
;WIDTH:0.386988
G1 F2400.000
G1 X103.509 Y101.703 E0.02140 ; infill
G1 X101.596 Y101.449 F10800.000 ; move to first infill point
;WIDTH:0.376983
G1 F2400.000
G1 X101.382 Y101.667 E0.00848 ; infill
;WIDTH:0.353319
G1 X101.221 Y101.822 E0.00578 ; infill
;WIDTH:0.326942
G1 X100.290 Y102.836 E0.03252 ; infill
;WIDTH:0.281468
G1 X100.109 Y103.027 E0.00522 ; infill
;WIDTH:0.234342
G1 X100.005 Y103.156 E0.00264 ; infill
;WIDTH:0.20761
G1 X99.902 Y103.286 E0.00227 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.005 Y103.156 E-0.04369 ; wipe and retract
;WIPE_END
G1 E-2.35631 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 X103.936 Y112.180 ; move to first infill point
G1 Z1.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.315727
G1 F2400.000
G1 X103.673 Y112.144 E0.00603 ; infill
;WIDTH:0.303027
G1 X103.200 Y112.033 E0.01051 ; infill
;WIDTH:0.269381
G1 X99.818 Y111.270 E0.06527 ; infill
;WIDTH:0.257892
G1 X99.281 Y111.152 E0.00984 ; infill
G1 X98.683 Y110.989 E0.01107 ; infill
G1 X97.267 Y111.341 F10800.000 ; move to first infill point
;WIDTH:0.324457
G1 F2400.000
G1 X97.024 Y111.532 E0.00724 ; infill
;WIDTH:0.313649
G1 X95.885 Y112.484 E0.03341 ; infill
G1 X95.613 Y112.686 E0.00762 ; infill
G1 X95.598 Y112.948 E0.00591 ; infill
G1 X95.215 Y114.203 F10800.000 ; move to first infill point
;WIDTH:0.301262
G1 F2400.000
G1 X95.440 Y114.582 E0.00947 ; infill
;WIDTH:0.329983
G1 X95.599 Y114.793 E0.00631 ; infill
;WIDTH:0.36031
G1 X95.805 Y115.061 E0.00894 ; infill
;WIDTH:0.397393
G1 X95.886 Y115.132 E0.00315 ; infill
;WIDTH:0.431972
G1 X95.931 Y115.160 E0.00173 ; infill
;WIDTH:0.469347
G1 X96.037 Y115.204 E0.00405 ; infill
;WIDTH:0.509421
G1 X96.142 Y115.248 E0.00443 ; infill
G1 X96.438 Y115.313 E0.01175 ; infill
;WIDTH:0.411703
G1 X96.844 Y115.357 E0.01252 ; infill
;WIDTH:0.431055
G1 X102.063 Y115.311 E0.16846 ; infill
;WIDTH:0.468161
G1 X102.878 Y115.307 E0.02882 ; infill
;WIDTH:0.478397
G1 X103.197 Y115.297 E0.01153 ; infill
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.878 Y115.307 E-0.08405 ; wipe and retract
;WIPE_END
G1 E-2.31595 F2400.000 ; retract
G1 Z1.275 F10800.000 ; lift Z
G1 Z1.400 ; move to next layer (6)
;AFTER_LAYER_CHANGE
;1.4
G1 Z1.475 ; lift Z
G1 X103.715 Y103.045 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.726 Y102.877 E0.00571 ; perimeter
G1 X103.905 Y102.962 E0.00674 ; perimeter
G1 X103.769 Y103.019 E0.00501 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.726 Y102.877 E-0.03932 ; wipe and retract
G1 X103.905 Y102.962 E-0.05251 ; wipe and retract
G1 X103.769 Y103.019 E-0.03904 ; wipe and retract
;WIPE_END
G1 E-2.26912 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X110.344 Y106.575 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.130 Y106.946 E0.01984 ; perimeter
G1 X109.808 Y107.310 E0.02253 ; perimeter
G1 X108.900 Y108.095 E0.05563 ; perimeter
G1 X106.855 Y109.764 E0.12223 ; perimeter
G1 X105.724 Y110.727 E0.06881 ; perimeter
G1 X104.812 Y111.451 E0.05397 ; perimeter
G1 X104.647 Y111.627 E0.01116 ; perimeter
G1 X104.371 Y111.775 E0.01448 ; perimeter
G1 X103.681 Y111.873 E0.03230 ; perimeter
G1 X103.413 Y111.812 E0.01274 ; perimeter
G1 X103.056 Y111.766 E0.01666 ; perimeter
G1 X102.855 Y111.706 E0.00972 ; perimeter
G1 X102.617 Y111.669 E0.01117 ; perimeter
G1 X102.286 Y111.565 E0.01606 ; perimeter
G1 X101.463 Y111.367 E0.03923 ; perimeter
G1 X100.628 Y111.198 E0.03947 ; perimeter
G1 X99.544 Y110.947 E0.05152 ; perimeter
G1 X98.613 Y110.667 E0.04502 ; perimeter
G1 X98.538 Y110.533 E0.00709 ; perimeter
G1 X98.274 Y110.261 E0.01758 ; perimeter
G1 X98.273 Y109.837 E0.01965 ; perimeter
G1 X98.342 Y109.371 E0.02183 ; perimeter
G1 X98.362 Y108.988 E0.01773 ; perimeter
G1 X98.467 Y108.460 E0.02494 ; perimeter
G1 X99.316 Y107.288 E0.06706 ; perimeter
G1 X99.776 Y106.696 E0.03474 ; perimeter
G1 X100.283 Y106.230 E0.03185 ; perimeter
G1 X103.364 Y103.813 E0.18142 ; perimeter
G1 X103.950 Y103.466 E0.03152 ; perimeter
G1 X104.185 Y103.367 E0.01184 ; perimeter
G1 X104.790 Y103.182 E0.02928 ; perimeter
G1 X105.689 Y102.854 E0.04432 ; perimeter
G1 X105.770 Y102.810 E0.00427 ; perimeter
G1 X107.205 Y102.331 E0.07012 ; perimeter
G1 X107.615 Y102.162 E0.02051 ; perimeter
G1 X107.868 Y102.109 E0.01198 ; perimeter
G1 X108.153 Y102.082 E0.01325 ; perimeter
G1 X108.590 Y102.190 E0.02086 ; perimeter
G1 X108.786 Y102.462 E0.01555 ; perimeter
G1 X109.185 Y103.461 E0.04979 ; perimeter
G1 X109.574 Y104.566 E0.05427 ; perimeter
G1 X110.323 Y106.519 E0.09688 ; perimeter
G1 X110.636 Y106.848 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.130 Y106.946 E-0.12363 ; wipe and retract
G1 X109.808 Y107.310 E-0.12833 ; wipe and retract
G1 X108.900 Y108.095 E-0.31694 ; wipe and retract
G1 X106.855 Y109.764 E-0.69635 ; wipe and retract
G1 X105.724 Y110.727 E-0.39202 ; wipe and retract
G1 X104.812 Y111.451 E-0.30748 ; wipe and retract
G1 X104.647 Y111.627 E-0.06356 ; wipe and retract
G1 X104.371 Y111.775 E-0.08249 ; wipe and retract
G1 X103.736 Y111.865 E-0.16921 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X108.704 Y101.722 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.631 Y101.704 E0.00255 ; perimeter
G1 X108.701 Y101.662 E0.00277 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.631 Y101.704 E-0.02157 ; wipe and retract
G1 X108.701 Y101.662 E-0.02157 ; wipe and retract
;WIPE_END
G1 E-2.35685 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X105.558 Y97.919 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.399 Y98.020 E0.00637 ; perimeter
G1 X104.997 Y98.441 E0.01969 ; perimeter
G1 X103.938 Y99.611 E0.05342 ; perimeter
G1 X103.585 Y100.057 E0.01925 ; perimeter
G1 X103.318 Y100.642 E0.02177 ; perimeter
G1 X103.279 Y101.006 E0.01240 ; perimeter
G1 X102.769 Y100.885 E0.01776 ; perimeter
G1 X102.343 Y100.951 E0.01459 ; perimeter
G1 X102.180 Y101.042 E0.00630 ; perimeter
G1 X101.989 Y101.094 E0.00671 ; perimeter
G1 X102.118 Y100.931 E0.00702 ; perimeter
G1 X102.676 Y100.384 E0.02647 ; perimeter
G1 X103.144 Y100.031 E0.01986 ; perimeter
G1 X104.301 Y99.075 E0.05080 ; perimeter
G1 X104.600 Y98.556 E0.02025 ; perimeter
G1 X104.854 Y98.270 E0.01297 ; perimeter
G1 X105.215 Y97.976 E0.01574 ; perimeter
G1 X105.514 Y97.852 E0.01096 ; perimeter
G1 X105.682 Y97.807 E0.00590 ; perimeter
G1 X105.603 Y97.879 E0.00364 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.399 Y98.020 E-0.06533 ; wipe and retract
G1 X104.997 Y98.441 E-0.15352 ; wipe and retract
G1 X103.938 Y99.611 E-0.41648 ; wipe and retract
G1 X103.585 Y100.057 E-0.15006 ; wipe and retract
G1 X103.318 Y100.642 E-0.16973 ; wipe and retract
G1 X103.279 Y101.006 E-0.09668 ; wipe and retract
G1 X102.769 Y100.885 E-0.13843 ; wipe and retract
G1 X102.343 Y100.951 E-0.11376 ; wipe and retract
G1 X102.180 Y101.042 E-0.04915 ; wipe and retract
G1 X101.989 Y101.094 E-0.05228 ; wipe and retract
G1 X102.118 Y100.931 E-0.05470 ; wipe and retract
G1 X102.676 Y100.384 E-0.20633 ; wipe and retract
G1 X103.144 Y100.031 E-0.15481 ; wipe and retract
G1 X104.301 Y99.075 E-0.39603 ; wipe and retract
G1 X104.420 Y98.869 E-0.06270 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X111.430 Y96.968 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.279 Y97.195 E0.01264 ; perimeter
G1 X111.211 Y97.438 E0.01168 ; perimeter
G1 X110.638 Y98.265 E0.04661 ; perimeter
G1 X110.504 Y98.517 E0.01324 ; perimeter
G1 X110.124 Y99.012 E0.02889 ; perimeter
G1 X109.828 Y99.480 E0.02566 ; perimeter
G1 X109.448 Y99.999 E0.02976 ; perimeter
G1 X109.422 Y100.106 E0.00511 ; perimeter
G1 X109.201 Y100.361 E0.01564 ; perimeter
G1 X109.171 Y100.428 E0.00339 ; perimeter
G1 X109.070 Y100.541 E0.00704 ; perimeter
G1 X108.975 Y100.705 E0.00880 ; perimeter
G1 X108.811 Y100.922 E0.01258 ; perimeter
G1 X108.607 Y101.131 E0.01351 ; perimeter
G1 X108.382 Y101.289 E0.01278 ; perimeter
G1 X107.761 Y101.544 E0.03110 ; perimeter
G1 X107.503 Y101.674 E0.01338 ; perimeter
G1 X105.265 Y102.458 E0.10983 ; perimeter
G1 X104.685 Y102.644 E0.02822 ; perimeter
G1 X104.497 Y102.627 E0.00874 ; perimeter
G1 X104.289 Y102.661 E0.00975 ; perimeter
G1 X104.160 Y102.538 E0.00826 ; perimeter
G1 X103.903 Y102.428 E0.01296 ; perimeter
G1 X103.763 Y101.869 E0.02668 ; perimeter
G1 X103.753 Y101.113 E0.03506 ; perimeter
G1 X103.789 Y100.771 E0.01593 ; perimeter
G1 X104.000 Y100.310 E0.02346 ; perimeter
G1 X104.306 Y99.922 E0.02290 ; perimeter
G1 X105.707 Y98.396 E0.09598 ; perimeter
G1 X105.851 Y98.304 E0.00790 ; perimeter
G1 X106.040 Y98.133 E0.01182 ; perimeter
G1 X106.830 Y97.339 E0.05187 ; perimeter
G1 X107.046 Y97.209 E0.01165 ; perimeter
G1 X107.585 Y96.829 E0.03058 ; perimeter
G1 X107.632 Y96.741 E0.00461 ; perimeter
G1 X107.952 Y96.487 E0.01893 ; perimeter
G1 X108.017 Y96.355 E0.00680 ; perimeter
G1 X108.580 Y96.087 E0.02888 ; perimeter
G1 X108.711 Y95.979 E0.00789 ; perimeter
G1 X108.926 Y95.962 E0.01000 ; perimeter
G1 X109.336 Y95.818 E0.02009 ; perimeter
G1 X109.931 Y95.799 E0.02760 ; perimeter
G1 X110.373 Y95.879 E0.02078 ; perimeter
G1 X110.910 Y96.175 E0.02842 ; perimeter
G1 X111.065 Y96.356 E0.01106 ; perimeter
G1 X111.218 Y96.465 E0.00870 ; perimeter
G1 X111.272 Y96.666 E0.00961 ; perimeter
G1 X111.402 Y96.915 E0.01301 ; perimeter
G1 X111.624 Y97.160 F10800.000 ; move inwards before travel
G1 X110.309 Y95.378 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.046 Y95.330 E0.00905 ; perimeter
G1 X110.377 Y94.981 E0.01627 ; perimeter
G1 X110.557 Y94.823 E0.00810 ; perimeter
G1 X110.514 Y94.956 E0.00472 ; perimeter
G1 X110.256 Y95.151 E0.01096 ; perimeter
G1 X110.295 Y95.319 E0.00586 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.046 Y95.330 E-0.06584 ; wipe and retract
G1 X110.377 Y94.981 E-0.12688 ; wipe and retract
G1 X110.557 Y94.823 E-0.06319 ; wipe and retract
G1 X110.514 Y94.956 E-0.03678 ; wipe and retract
G1 X110.256 Y95.151 E-0.08546 ; wipe and retract
G1 X110.295 Y95.319 E-0.04566 ; wipe and retract
;WIPE_END
G1 E-1.97619 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X113.927 Y96.360 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.139 Y96.531 E0.01259 ; perimeter
G1 X114.400 Y96.670 E0.01372 ; perimeter
G1 X114.567 Y97.179 E0.02481 ; perimeter
G1 X114.794 Y98.314 E0.05363 ; perimeter
G1 X114.916 Y98.735 E0.02028 ; perimeter
G1 X114.929 Y98.851 E0.00540 ; perimeter
G1 X115.009 Y99.072 E0.01090 ; perimeter
G1 X115.014 Y99.968 E0.04149 ; perimeter
G1 X114.813 Y103.528 E0.16517 ; perimeter
G1 X114.759 Y105.605 E0.09624 ; perimeter
G1 X114.709 Y106.623 E0.04725 ; perimeter
G1 X114.552 Y107.429 E0.03803 ; perimeter
G1 X114.401 Y108.022 E0.02833 ; perimeter
G1 X114.202 Y108.258 E0.01432 ; perimeter
G1 X113.823 Y108.427 E0.01920 ; perimeter
G1 X113.353 Y108.288 E0.02269 ; perimeter
G1 X113.000 Y108.086 E0.01885 ; perimeter
G1 X112.126 Y107.499 E0.04878 ; perimeter
G1 X111.708 Y107.242 E0.02272 ; perimeter
G1 X111.006 Y106.713 E0.04072 ; perimeter
G1 X110.834 Y106.407 E0.01624 ; perimeter
G1 X110.618 Y105.925 E0.02448 ; perimeter
G1 X110.070 Y104.342 E0.07759 ; perimeter
G1 X109.422 Y102.654 E0.08375 ; perimeter
G1 X109.298 Y102.202 E0.02170 ; perimeter
G1 X109.197 Y101.958 E0.01227 ; perimeter
G1 X109.170 Y101.375 E0.02701 ; perimeter
G1 X110.070 Y99.921 E0.07919 ; perimeter
G1 X110.620 Y99.102 E0.04573 ; perimeter
G1 X111.233 Y98.119 E0.05367 ; perimeter
G1 X111.518 Y97.719 E0.02275 ; perimeter
G1 X111.751 Y97.349 E0.02022 ; perimeter
G1 X112.171 Y96.865 E0.02968 ; perimeter
G1 X112.634 Y96.687 E0.02296 ; perimeter
G1 X113.089 Y96.543 E0.02213 ; perimeter
G1 X113.450 Y96.381 E0.01832 ; perimeter
G1 X113.867 Y96.364 E0.01935 ; perimeter
G1 X114.141 Y96.192 F10800.000 ; move inwards before travel
G1 X113.908 Y95.878 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.493 Y95.466 E0.02422 ; perimeter
G1 X114.608 Y96.235 E0.02633 ; perimeter
G1 X114.406 Y96.127 E0.00776 ; perimeter
G1 X114.085 Y95.868 E0.01395 ; perimeter
G1 X113.968 Y95.875 E0.00396 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.493 Y95.466 E-0.17557 ; wipe and retract
G1 X114.608 Y96.235 E-0.20523 ; wipe and retract
G1 X114.406 Y96.127 E-0.06047 ; wipe and retract
G1 X114.085 Y95.868 E-0.10879 ; wipe and retract
G1 X113.968 Y95.875 E-0.03088 ; wipe and retract
;WIPE_END
G1 E-1.81905 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X115.101 Y107.132 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.192 Y109.851 E0.09210 ; perimeter
G1 X114.910 Y109.798 E0.00972 ; perimeter
G1 X114.609 Y109.529 E0.01366 ; perimeter
G1 X114.160 Y109.736 E0.01676 ; perimeter
G1 X113.970 Y108.978 E0.02646 ; perimeter
G1 X113.901 Y108.920 E0.00306 ; perimeter
G1 X114.499 Y108.654 E0.02216 ; perimeter
G1 X114.841 Y108.248 E0.01796 ; perimeter
G1 X115.022 Y107.535 E0.02491 ; perimeter
G1 X115.089 Y107.191 E0.01187 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.192 Y109.851 E-0.70257 ; wipe and retract
G1 X114.910 Y109.798 E-0.07579 ; wipe and retract
G1 X114.609 Y109.529 E-0.10649 ; wipe and retract
G1 X114.160 Y109.736 E-0.13063 ; wipe and retract
G1 X113.970 Y108.978 E-0.20631 ; wipe and retract
G1 X113.901 Y108.920 E-0.02383 ; wipe and retract
G1 X114.499 Y108.654 E-0.17278 ; wipe and retract
G1 X114.841 Y108.248 E-0.14003 ; wipe and retract
G1 X115.022 Y107.535 E-0.19421 ; wipe and retract
G1 X115.089 Y107.191 E-0.09251 ; wipe and retract
;WIPE_END
G1 E-0.55485 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X113.540 Y109.247 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.641 Y109.650 E0.01925 ; perimeter
G1 X113.301 Y110.058 E0.02458 ; perimeter
G1 X111.135 Y111.893 E0.13154 ; perimeter
G1 X108.789 Y113.820 E0.14061 ; perimeter
G1 X108.171 Y114.218 E0.03405 ; perimeter
G1 X107.905 Y114.179 E0.01245 ; perimeter
G1 X107.767 Y114.208 E0.00656 ; perimeter
G1 X107.545 Y114.100 E0.01144 ; perimeter
G1 X106.693 Y113.592 E0.04596 ; perimeter
G1 X106.348 Y113.347 E0.01959 ; perimeter
G1 X105.830 Y113.030 E0.02809 ; perimeter
G1 X105.416 Y112.721 E0.02396 ; perimeter
G1 X105.157 Y112.204 E0.02677 ; perimeter
G1 X105.283 Y111.946 E0.01332 ; perimeter
G1 X105.324 Y111.766 E0.00852 ; perimeter
G1 X105.759 Y111.359 E0.02761 ; perimeter
G1 X106.661 Y110.638 E0.05348 ; perimeter
G1 X107.842 Y109.639 E0.07166 ; perimeter
G1 X108.211 Y109.359 E0.02144 ; perimeter
G1 X108.916 Y108.742 E0.04341 ; perimeter
G1 X110.188 Y107.717 E0.07569 ; perimeter
G1 X110.251 Y107.697 E0.00306 ; perimeter
G1 X110.652 Y107.460 E0.02157 ; perimeter
G1 X111.023 Y107.536 E0.01754 ; perimeter
G1 X111.250 Y107.613 E0.01109 ; perimeter
G1 X113.072 Y108.854 E0.10215 ; perimeter
G1 X113.494 Y109.208 E0.02550 ; perimeter
G1 X113.940 Y109.264 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.641 Y109.650 E-0.12281 ; wipe and retract
G1 X113.301 Y110.058 E-0.14003 ; wipe and retract
G1 X111.135 Y111.893 E-0.74939 ; wipe and retract
G1 X108.789 Y113.820 E-0.80104 ; wipe and retract
G1 X108.171 Y114.218 E-0.19401 ; wipe and retract
G1 X107.905 Y114.179 E-0.07091 ; wipe and retract
G1 X107.767 Y114.208 E-0.03740 ; wipe and retract
G1 X107.545 Y114.100 E-0.06514 ; wipe and retract
G1 X107.222 Y113.907 E-0.09927 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X104.632 Y112.182 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.620 Y112.207 E0.00094 ; perimeter
G1 X104.682 Y112.332 E0.00471 ; perimeter
G1 X104.506 Y112.243 E0.00668 ; perimeter
G1 X104.579 Y112.211 E0.00270 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.620 Y112.207 E-0.01077 ; wipe and retract
G1 X104.682 Y112.332 E-0.03671 ; wipe and retract
G1 X104.506 Y112.243 E-0.05204 ; wipe and retract
G1 X104.579 Y112.211 E-0.02108 ; wipe and retract
;WIPE_END
G1 E-2.27940 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X106.529 Y114.055 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.315 Y114.525 E0.03100 ; perimeter
G1 X107.705 Y114.714 E0.01467 ; perimeter
G1 X107.921 Y114.668 E0.00746 ; perimeter
G1 X108.280 Y114.722 E0.01229 ; perimeter
G1 X108.644 Y114.487 E0.01466 ; perimeter
G1 X108.545 Y114.923 E0.01512 ; perimeter
G1 X108.905 Y115.387 E0.01991 ; perimeter
G1 X108.974 Y115.438 E0.00288 ; perimeter
G1 X107.343 Y115.468 E0.05521 ; perimeter
G1 X102.784 Y115.382 E0.15434 ; perimeter
G1 X96.988 Y115.431 E0.19618 ; perimeter
G1 X98.095 Y115.404 E0.03746 ; perimeter
G1 X102.082 Y115.375 E0.13497 ; perimeter
G1 X103.475 Y115.327 E0.04716 ; perimeter
G1 X105.482 Y115.172 E0.06815 ; perimeter
G1 X106.254 Y114.804 E0.02894 ; perimeter
G1 X106.508 Y114.112 E0.02496 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.315 Y114.525 E-0.23927 ; wipe and retract
G1 X107.705 Y114.714 E-0.11439 ; wipe and retract
G1 X107.921 Y114.668 E-0.05815 ; wipe and retract
G1 X108.280 Y114.722 E-0.09584 ; wipe and retract
G1 X108.644 Y114.487 E-0.11426 ; wipe and retract
G1 X108.545 Y114.923 E-0.11787 ; wipe and retract
G1 X108.905 Y115.387 E-0.15518 ; wipe and retract
G1 X108.974 Y115.438 E-0.02246 ; wipe and retract
G1 X107.343 Y115.468 E-0.43040 ; wipe and retract
G1 X103.811 Y115.402 E-0.93217 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X109.090 Y114.698 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.156 Y114.406 E0.01386 ; perimeter
G1 X109.463 Y114.107 E0.01984 ; perimeter
G1 X113.780 Y110.537 E0.25947 ; perimeter
G1 X114.206 Y110.246 E0.02395 ; perimeter
G1 X114.524 Y110.099 E0.01620 ; perimeter
G1 X114.689 Y110.246 E0.01024 ; perimeter
G1 X114.918 Y110.290 E0.01080 ; perimeter
G1 X115.088 Y110.724 E0.02162 ; perimeter
G1 X115.095 Y110.942 E0.01006 ; perimeter
G1 X115.144 Y111.195 E0.01194 ; perimeter
G1 X115.197 Y111.665 E0.02192 ; perimeter
G1 X115.121 Y113.089 E0.06606 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.000 Y114.764 E0.07021 ; perimeter (bridge)
G1 X114.878 Y114.933 E0.00869 ; perimeter (bridge)
G1 X114.685 Y115.072 E0.00997 ; perimeter (bridge)
G1 X114.657 Y115.123 E0.00241 ; perimeter (bridge)
G1 X114.451 Y115.284 E0.01094 ; perimeter (bridge)
G1 X114.184 Y115.262 E0.01118 ; perimeter (bridge)
G1 X113.116 Y115.282 E0.04467 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.961 Y115.246 E0.14616 ; perimeter
G1 X109.612 Y115.181 E0.01644 ; perimeter
G1 X109.430 Y115.176 E0.00842 ; perimeter
G1 X109.245 Y115.039 E0.01066 ; perimeter
G1 X109.065 Y114.807 E0.01360 ; perimeter
G1 X109.077 Y114.756 E0.00241 ; perimeter
G1 X108.832 Y114.547 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.156 Y114.406 E-0.09479 ; wipe and retract
G1 X109.463 Y114.107 E-0.11301 ; wipe and retract
G1 X113.780 Y110.537 E-1.47821 ; wipe and retract
G1 X114.206 Y110.246 E-0.13643 ; wipe and retract
G1 X114.524 Y110.099 E-0.09230 ; wipe and retract
G1 X114.689 Y110.246 E-0.05836 ; wipe and retract
G1 X114.918 Y110.290 E-0.06152 ; wipe and retract
G1 X115.088 Y110.724 E-0.12318 ; wipe and retract
G1 X115.095 Y110.942 E-0.05734 ; wipe and retract
G1 X115.142 Y111.183 E-0.06485 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X99.545 Y106.253 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.421 Y106.368 E0.00575 ; perimeter
G1 X99.280 Y106.548 E0.00773 ; perimeter
G1 X99.154 Y106.199 E0.01256 ; perimeter
G1 X99.486 Y106.245 E0.01135 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.421 Y106.368 E-0.03680 ; wipe and retract
G1 X99.280 Y106.548 E-0.06026 ; wipe and retract
G1 X99.154 Y106.199 E-0.09795 ; wipe and retract
G1 X99.486 Y106.245 E-0.08845 ; wipe and retract
;WIPE_END
G1 E-2.11654 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X97.968 Y108.498 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X97.888 Y108.899 E0.01387 ; perimeter
G1 X97.712 Y108.698 E0.00906 ; perimeter
G1 X97.468 Y108.589 E0.00906 ; perimeter
G1 X97.596 Y108.559 E0.00447 ; perimeter
G1 X97.873 Y108.547 E0.00935 ; perimeter
G1 X97.915 Y108.525 E0.00162 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.888 Y108.899 E-0.09895 ; wipe and retract
G1 X97.712 Y108.698 E-0.07062 ; wipe and retract
G1 X97.468 Y108.589 E-0.07060 ; wipe and retract
G1 X97.596 Y108.559 E-0.03483 ; wipe and retract
G1 X97.873 Y108.547 E-0.07293 ; wipe and retract
G1 X97.915 Y108.525 E-0.01262 ; wipe and retract
;WIPE_END
G1 E-2.03945 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X98.036 Y110.708 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.063 Y110.736 E0.00130 ; perimeter
G1 X98.012 Y110.754 E0.00184 ; perimeter
G1 X98.143 Y111.228 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.786 Y111.288 E0.02990 ; perimeter
G1 X101.441 Y111.901 E0.12624 ; perimeter
G1 X102.855 Y112.205 E0.06698 ; perimeter
G1 X103.897 Y112.475 E0.04985 ; perimeter
G1 X104.540 Y112.800 E0.03339 ; perimeter
G1 X105.723 Y113.627 E0.06685 ; perimeter
G1 X105.766 Y113.709 E0.00429 ; perimeter
G1 X106.040 Y113.989 E0.01814 ; perimeter
G1 X105.869 Y114.453 E0.02291 ; perimeter
G1 X105.356 Y114.698 E0.02636 ; perimeter
G1 X103.448 Y114.846 E0.08863 ; perimeter
G1 X102.072 Y114.893 E0.06376 ; perimeter
G1 X98.088 Y114.922 E0.18458 ; perimeter
G1 X96.961 Y114.949 E0.05219 ; perimeter
G1 X96.463 Y114.891 E0.02322 ; perimeter
G1 X96.042 Y114.722 E0.02103 ; perimeter
G1 X95.763 Y114.362 E0.02107 ; perimeter
G1 X95.550 Y113.954 E0.02133 ; perimeter
G1 X95.476 Y113.707 E0.01192 ; perimeter
G1 X95.535 Y113.409 E0.01411 ; perimeter
G1 X95.667 Y113.272 E0.00880 ; perimeter
G1 X95.812 Y112.972 E0.01541 ; perimeter
G1 X96.045 Y112.805 E0.01329 ; perimeter
G1 X97.328 Y111.677 E0.07912 ; perimeter
G1 X97.637 Y111.430 E0.01833 ; perimeter
G1 X97.902 Y111.349 E0.01282 ; perimeter
G1 X98.090 Y111.255 E0.00975 ; perimeter
G1 X98.321 Y110.869 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.786 Y111.288 E-0.18393 ; wipe and retract
G1 X101.441 Y111.901 E-0.71919 ; wipe and retract
G1 X102.855 Y112.205 E-0.38158 ; wipe and retract
G1 X103.897 Y112.475 E-0.28397 ; wipe and retract
G1 X104.540 Y112.800 E-0.19021 ; wipe and retract
G1 X105.723 Y113.627 E-0.38086 ; wipe and retract
G1 X105.766 Y113.709 E-0.02445 ; wipe and retract
G1 X106.040 Y113.989 E-0.10335 ; wipe and retract
G1 X106.023 Y114.033 E-0.01246 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X95.302 Y112.919 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.266 Y112.993 E0.00277 ; perimeter
G1 X95.090 Y113.176 E0.00861 ; perimeter
G1 X94.986 Y113.702 E0.01814 ; perimeter
G1 X94.916 Y113.602 E0.00413 ; perimeter
G1 X94.828 Y113.410 E0.00715 ; perimeter
G1 X94.749 Y113.165 E0.00872 ; perimeter
G1 X94.754 Y112.962 E0.00687 ; perimeter
G1 X94.763 Y112.943 E0.00070 ; perimeter
G1 X95.143 Y112.977 E0.01292 ; perimeter
G1 X95.245 Y112.940 E0.00367 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.266 Y112.993 E-0.01511 ; wipe and retract
G1 X95.090 Y113.176 E-0.06714 ; wipe and retract
G1 X94.986 Y113.702 E-0.14143 ; wipe and retract
G1 X94.916 Y113.602 E-0.03218 ; wipe and retract
G1 X94.828 Y113.410 E-0.05577 ; wipe and retract
G1 X94.749 Y113.165 E-0.06794 ; wipe and retract
G1 X94.754 Y112.962 E-0.05358 ; wipe and retract
G1 X94.763 Y112.943 E-0.00543 ; wipe and retract
G1 X95.143 Y112.977 E-0.10076 ; wipe and retract
G1 X95.245 Y112.940 E-0.02864 ; wipe and retract
;WIPE_END
G1 E-1.83203 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X96.072 Y115.253 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X96.343 Y115.363 E0.00989 ; perimeter
G1 X96.933 Y115.431 E0.02009 ; perimeter
G1 X96.420 Y115.397 E0.01738 ; perimeter
G1 X96.252 Y115.353 E0.00589 ; perimeter
G1 X96.124 Y115.283 E0.00493 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.343 Y115.363 E-0.06154 ; wipe and retract
G1 X96.933 Y115.431 E-0.15664 ; wipe and retract
G1 X96.420 Y115.397 E-0.13550 ; wipe and retract
G1 X96.252 Y115.353 E-0.04595 ; wipe and retract
G1 X96.124 Y115.283 E-0.03846 ; wipe and retract
;WIPE_END
G1 E-1.96192 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X109.065 Y95.843 ; move to first perimeter point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X109.186 Y95.499 E0.01690 ; perimeter
G1 X109.446 Y95.297 E0.01523 ; perimeter
G1 X109.730 Y94.957 E0.02054 ; perimeter
G1 X110.044 Y94.632 E0.02092 ; perimeter
G1 X110.287 Y94.418 E0.01503 ; perimeter
G1 X110.704 Y94.179 E0.02226 ; perimeter
G1 X111.151 Y94.114 E0.02089 ; perimeter
G1 X111.536 Y94.111 E0.01785 ; perimeter
G1 X111.704 Y94.147 E0.00794 ; perimeter
G1 X111.888 Y94.158 E0.00858 ; perimeter
G1 X112.325 Y94.289 E0.02113 ; perimeter
G1 X112.425 Y94.386 E0.00645 ; perimeter
G1 X112.418 Y94.427 E0.00189 ; perimeter
G1 X112.213 Y94.593 E0.01223 ; perimeter
G1 X111.763 Y94.786 E0.02266 ; perimeter
G1 X111.407 Y94.914 E0.01754 ; perimeter
G1 X111.301 Y94.916 E0.00491 ; perimeter
G1 X110.995 Y95.034 E0.01516 ; perimeter
G1 X110.927 Y95.248 E0.01042 ; perimeter
G1 X110.797 Y95.346 E0.00755 ; perimeter
G1 X110.920 Y95.870 E0.02493 ; perimeter
G1 X111.352 Y96.210 E0.02547 ; perimeter
G1 X111.842 Y96.269 E0.02284 ; perimeter
G1 X111.958 Y96.226 E0.00572 ; perimeter
G1 X112.257 Y96.183 E0.01401 ; perimeter
G1 X112.575 Y96.038 E0.01618 ; perimeter
G1 X112.718 Y95.937 E0.00814 ; perimeter
G1 X113.127 Y95.753 E0.02076 ; perimeter
G1 X113.635 Y95.481 E0.02666 ; perimeter
G1 X114.123 Y95.136 E0.02770 ; perimeter
G1 X114.102 Y94.977 E0.00742 ; perimeter
G1 X114.317 Y94.728 E0.01526 ; perimeter
G1 X114.301 Y94.673 E0.00265 ; perimeter
G1 X114.459 Y94.600 E0.00804 ; perimeter
G1 X114.609 Y94.655 E0.00742 ; perimeter
G1 X114.755 Y94.823 E0.01030 ; perimeter
G1 X114.811 Y95.018 E0.00941 ; perimeter
G1 X114.971 Y95.347 E0.01691 ; perimeter
G1 X115.262 Y97.352 E0.09387 ; perimeter
G1 X115.349 Y98.233 E0.04100 ; perimeter
G1 X115.449 Y98.863 E0.02956 ; perimeter
G1 X115.498 Y99.586 E0.03357 ; perimeter
G1 X115.565 Y101.735 E0.09956 ; perimeter
G1 X115.576 Y103.818 E0.09648 ; perimeter
G1 X115.554 Y105.781 E0.09095 ; perimeter
G1 X115.588 Y107.351 E0.07275 ; perimeter
G1 X115.705 Y110.713 E0.15582 ; perimeter
G1 X115.670 Y111.832 E0.05187 ; perimeter
G1 X115.543 Y112.835 E0.04683 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X115.343 Y114.065 E0.05208 ; perimeter (bridge)
G1 X115.075 Y115.245 E0.05058 ; perimeter (bridge)
G1 X114.952 Y115.375 E0.00749 ; perimeter (bridge)
G1 X114.697 Y115.469 E0.01136 ; perimeter (bridge)
G1 X114.449 Y115.521 E0.01057 ; perimeter (bridge)
G1 X113.269 Y115.667 E0.04971 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X112.398 Y115.748 E0.04050 ; perimeter
G1 X111.667 Y115.778 E0.03392 ; perimeter
G1 X109.802 Y115.904 E0.08658 ; perimeter
G1 X107.343 Y115.951 E0.11391 ; perimeter
G1 X102.782 Y115.864 E0.21132 ; perimeter
G1 X96.848 Y115.914 E0.27485 ; perimeter
G1 X96.341 Y115.874 E0.02356 ; perimeter
G1 X96.072 Y115.803 E0.01291 ; perimeter
G1 X95.771 Y115.640 E0.01585 ; perimeter
G1 X95.510 Y115.347 E0.01817 ; perimeter
G1 X95.280 Y115.040 E0.01777 ; perimeter
G1 X94.874 Y114.423 E0.03422 ; perimeter
G1 X94.784 Y114.256 E0.00879 ; perimeter
G1 X94.496 Y113.842 E0.02335 ; perimeter
G1 X94.378 Y113.585 E0.01312 ; perimeter
G1 X94.272 Y113.257 E0.01598 ; perimeter
G1 X94.257 Y113.034 E0.01032 ; perimeter
G1 X94.287 Y112.825 E0.00980 ; perimeter
G1 X94.406 Y112.564 E0.01329 ; perimeter
G1 X94.565 Y112.442 E0.00927 ; perimeter
G1 X95.079 Y112.487 E0.02392 ; perimeter
G1 X95.474 Y112.344 E0.01947 ; perimeter
G1 X95.828 Y112.104 E0.01979 ; perimeter
G1 X96.714 Y111.395 E0.05257 ; perimeter
G1 X97.217 Y111.024 E0.02897 ; perimeter
G1 X97.382 Y110.862 E0.01068 ; perimeter
G1 X97.624 Y110.459 E0.02177 ; perimeter
G1 X97.642 Y110.289 E0.00791 ; perimeter
G1 X97.722 Y110.020 E0.01304 ; perimeter
G1 X97.703 Y109.421 E0.02774 ; perimeter
G1 X97.419 Y109.095 E0.02005 ; perimeter
G1 X97.054 Y108.933 E0.01849 ; perimeter
G1 X96.664 Y108.997 E0.01830 ; perimeter
G1 X96.222 Y108.987 E0.02050 ; perimeter
G1 X95.845 Y108.938 E0.01761 ; perimeter
G1 X95.741 Y108.814 E0.00749 ; perimeter
G1 X95.908 Y108.618 E0.01194 ; perimeter
G1 X96.133 Y108.484 E0.01214 ; perimeter
G1 X96.487 Y108.355 E0.01747 ; perimeter
G1 X96.610 Y108.287 E0.00651 ; perimeter
G1 X97.026 Y108.167 E0.02004 ; perimeter
G1 X97.516 Y108.080 E0.02304 ; perimeter
G1 X97.745 Y108.070 E0.01061 ; perimeter
G1 X98.190 Y107.838 E0.02325 ; perimeter
G1 X98.357 Y107.667 E0.01109 ; perimeter
G1 X98.681 Y107.239 E0.02485 ; perimeter
G1 X98.864 Y106.828 E0.02085 ; perimeter
G1 X98.758 Y106.501 E0.01592 ; perimeter
G1 X98.596 Y106.374 E0.00954 ; perimeter
G1 X98.479 Y106.238 E0.00835 ; perimeter
G1 X98.153 Y106.018 E0.01820 ; perimeter
G1 X97.905 Y105.750 E0.01688 ; perimeter
G1 X97.870 Y105.550 E0.00942 ; perimeter
G1 X98.008 Y105.417 E0.00890 ; perimeter
G1 X98.100 Y105.375 E0.00463 ; perimeter
G1 X98.466 Y105.380 E0.01699 ; perimeter
G1 X98.673 Y105.467 E0.01036 ; perimeter
G1 X98.734 Y105.524 E0.00386 ; perimeter
G1 X99.257 Y105.727 E0.02600 ; perimeter
G1 X99.740 Y105.793 E0.02256 ; perimeter
G1 X100.063 Y105.660 E0.01619 ; perimeter
G1 X100.182 Y105.636 E0.00563 ; perimeter
G1 X100.618 Y105.327 E0.02477 ; perimeter
G1 X101.444 Y104.663 E0.04906 ; perimeter
G1 X102.369 Y103.972 E0.05349 ; perimeter
G1 X102.591 Y103.769 E0.01397 ; perimeter
G1 X102.858 Y103.572 E0.01534 ; perimeter
G1 X103.229 Y103.096 E0.02798 ; perimeter
G1 X103.247 Y102.806 E0.01342 ; perimeter
G1 X103.297 Y102.590 E0.01028 ; perimeter
G1 X103.280 Y102.437 E0.00716 ; perimeter
G1 X103.304 Y101.889 E0.02540 ; perimeter
G1 X103.070 Y101.452 E0.02298 ; perimeter
G1 X102.750 Y101.376 E0.01523 ; perimeter
G1 X102.502 Y101.414 E0.01160 ; perimeter
G1 X102.364 Y101.491 E0.00734 ; perimeter
G1 X102.155 Y101.549 E0.01005 ; perimeter
G1 X101.917 Y101.684 E0.01268 ; perimeter
G1 X101.614 Y101.898 E0.01717 ; perimeter
G1 X101.226 Y102.357 E0.02783 ; perimeter
G1 X101.068 Y102.586 E0.01289 ; perimeter
G1 X100.432 Y103.276 E0.04348 ; perimeter
G1 X100.147 Y103.537 E0.01790 ; perimeter
G1 X99.820 Y103.764 E0.01841 ; perimeter
G1 X99.497 Y103.840 E0.01541 ; perimeter
G1 X99.380 Y103.786 E0.00598 ; perimeter
G1 X99.354 Y103.632 E0.00723 ; perimeter
G1 X99.431 Y103.341 E0.01395 ; perimeter
G1 X99.573 Y103.086 E0.01351 ; perimeter
G1 X99.991 Y102.574 E0.03062 ; perimeter
G1 X100.245 Y102.338 E0.01609 ; perimeter
G1 X100.534 Y102.025 E0.01973 ; perimeter
G1 X100.753 Y101.831 E0.01355 ; perimeter
G1 X101.220 Y101.326 E0.03182 ; perimeter
G1 X101.269 Y101.229 E0.00504 ; perimeter
G1 X101.758 Y100.609 E0.03661 ; perimeter
G1 X102.361 Y100.018 E0.03907 ; perimeter
G1 X102.845 Y99.652 E0.02812 ; perimeter
G1 X103.927 Y98.759 E0.06499 ; perimeter
G1 X104.204 Y98.278 E0.02571 ; perimeter
G1 X104.288 Y98.180 E0.00597 ; perimeter
G1 X104.521 Y97.920 E0.01617 ; perimeter
G1 X104.965 Y97.558 E0.02652 ; perimeter
G1 X105.358 Y97.395 E0.01973 ; perimeter
G1 X105.837 Y97.266 E0.02298 ; perimeter
G1 X106.146 Y97.141 E0.01544 ; perimeter
G1 X106.407 Y96.957 E0.01480 ; perimeter
G1 X106.776 Y96.401 E0.03090 ; perimeter
G1 X106.923 Y96.262 E0.00937 ; perimeter
G1 X107.014 Y96.215 E0.00473 ; perimeter
G1 X107.448 Y96.156 E0.02029 ; perimeter
G1 X107.687 Y96.149 E0.01106 ; perimeter
G1 X107.808 Y96.193 E0.00598 ; perimeter
G1 X108.375 Y96.063 E0.02693 ; perimeter
G1 X108.650 Y95.923 E0.01432 ; perimeter
G1 X109.006 Y95.854 E0.01679 ; perimeter
G1 X109.427 Y95.888 F10800.000 ; move inwards before travel
G1 X109.538 Y95.554 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.1198
G1 F2400.000
G1 X109.598 Y95.533 E0.00041 ; infill
G1 X109.739 Y95.544 E0.00090 ; infill
G1 X110.971 Y94.578 F10800.000 ; move to first infill point
;WIDTH:0.428338
G1 F2400.000
G1 X111.182 Y94.523 E0.00698 ; infill
;WIDTH:0.334003
G1 X111.907 Y94.415 E0.01774 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.182 Y94.523 E-0.19342 ; wipe and retract
;WIPE_END
G1 E-2.20658 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X111.605 Y96.782 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.271493
G1 F2400.000
G1 X111.951 Y96.595 E0.00748 ; infill
;WIDTH:0.166947
G1 X112.351 Y96.472 E0.00432 ; infill
;WIDTH:0.17751
G1 X112.533 Y96.396 E0.00221 ; infill
;WIDTH:0.205837
G1 X112.743 Y96.315 E0.00304 ; infill
;WIDTH:0.231419
G1 X112.817 Y96.278 E0.00131 ; infill
;WIDTH:0.257001
G1 X112.892 Y96.240 E0.00148 ; infill
;WIDTH:0.270548
G1 X113.348 Y96.038 E0.00945 ; infill
;WIDTH:0.282715
G1 X113.667 Y95.918 E0.00679 ; infill
G1 X114.778 Y96.598 F10800.000 ; move to first infill point
;WIDTH:0.229305
G1 F2400.000
G1 X114.940 Y97.389 E0.01251 ; infill
;WIDTH:0.119045
G1 X115.068 Y98.247 E0.00549 ; infill
G1 X115.117 Y98.473 E0.00146 ; infill
G1 X115.256 Y100.402 F10800.000 ; move to first infill point
;WIDTH:0.135158
G1 F2400.000
G1 X115.251 Y100.848 E0.00342 ; infill
;WIDTH:0.173395
G1 X115.245 Y101.294 E0.00484 ; infill
;WIDTH:0.211632
G1 X115.240 Y101.741 E0.00626 ; infill
;WIDTH:0.248545
G1 X115.224 Y102.342 E0.01028 ; infill
;WIDTH:0.285457
G1 X115.209 Y102.942 E0.01212 ; infill
;WIDTH:0.322368
G1 X115.193 Y103.543 E0.01397 ; infill
;WIDTH:0.330921
G1 X115.191 Y103.817 E0.00655 ; infill
;WIDTH:0.364689
G1 X115.152 Y105.786 E0.05270 ; infill
;WIDTH:0.395476
G1 X115.146 Y106.224 E0.01284 ; infill
;WIDTH:0.431988
G1 X115.121 Y106.892 E0.02162 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.146 Y106.224 E-0.17636 ; wipe and retract
;WIPE_END
G1 E-2.22364 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X109.892 Y104.648 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.102109
G1 F2400.000
G1 X109.738 Y104.225 E0.00221 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.892 Y104.648 E-0.11870 ; wipe and retract
;WIPE_END
G1 E-2.28130 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X109.095 Y100.990 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.106867
G1 F2400.000
G1 X108.961 Y101.174 E0.00121 ; infill
G1 X108.942 Y101.250 E0.00042 ; infill
G1 X109.136 Y102.620 F10800.000 ; move to first infill point
;WIDTH:0.128213
G1 F2400.000
G1 X109.035 Y102.320 E0.00225 ; infill
G1 X108.864 Y102.010 E0.00251 ; infill
G1 X108.309 Y101.606 F10800.000 ; move to first infill point
;WIDTH:0.126399
G1 F2400.000
G1 X107.981 Y101.788 E0.00260 ; infill
G1 X107.690 Y101.876 E0.00212 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.981 Y101.788 E-0.08043 ; wipe and retract
G1 X108.309 Y101.606 E-0.09898 ; wipe and retract
;WIPE_END
G1 E-2.22059 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X104.874 Y102.864 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.104596
G1 F2400.000
G1 X104.708 Y102.921 E0.00090 ; infill
G1 X104.508 Y102.942 E0.00103 ; infill
;WIDTH:0.202964
G1 X104.288 Y102.993 E0.00301 ; infill
G1 X103.612 Y102.566 F10800.000 ; move to first infill point
;WIDTH:0.180779
G1 F2400.000
G1 X103.587 Y102.427 E0.00162 ; infill
;WIDTH:0.172709
G1 X103.572 Y102.282 E0.00157 ; infill
;WIDTH:0.134815
G1 X103.558 Y102.137 E0.00111 ; infill
G1 X103.453 Y103.363 F10800.000 ; move to first infill point
;WIDTH:0.202199
G1 F2400.000
G1 X103.331 Y103.472 E0.00217 ; infill
;WIDTH:0.1622
G1 X103.208 Y103.580 E0.00162 ; infill
;WIDTH:0.122202
G1 X103.116 Y103.671 E0.00085 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.208 Y103.580 E-0.03410 ; wipe and retract
;WIPE_END
G1 E-2.36590 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X103.216 Y100.231 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.310578
G1 F2400.000
G1 X102.909 Y100.709 E0.01263 ; infill
G1 X101.799 Y101.243 F10800.000 ; move to first infill point
;WIDTH:0.281177
G1 F2400.000
G1 X101.503 Y101.542 E0.00833 ; infill
;WIDTH:0.269664
G1 X101.393 Y101.639 E0.00276 ; infill
;WIDTH:0.23905
G1 X100.802 Y102.298 E0.01444 ; infill
;WIDTH:0.333582
G1 X99.916 Y103.249 E0.03140 ; infill
;WIDTH:0.298693
G1 X99.636 Y103.507 E0.00812 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.916 Y103.249 E-0.10070 ; wipe and retract
;WIPE_END
G1 E-2.29930 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X100.299 Y105.863 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.186163
G1 F2400.000
G1 X99.961 Y106.067 E0.00470 ; infill
G1 X98.129 Y105.637 F10800.000 ; move to first infill point
;WIDTH:0.258086
G1 F2400.000
G1 X98.370 Y105.740 E0.00470 ; infill
;WIDTH:0.272986
G1 X98.386 Y105.746 E0.00032 ; infill
;WIDTH:0.294686
G1 X98.558 Y105.849 E0.00420 ; infill
;WIDTH:0.335686
G1 X98.722 Y105.935 E0.00450 ; infill
;WIDTH:0.350222
G1 X98.757 Y105.956 E0.00104 ; infill
;WIDTH:0.376453
G1 X98.940 Y106.086 E0.00623 ; infill
G1 X99.161 Y106.959 F10800.000 ; move to first infill point
;WIDTH:0.18592
G1 F2400.000
G1 X99.074 Y107.104 E0.00201 ; infill
;WIDTH:0.168041
G1 X98.995 Y107.241 E0.00164 ; infill
;WIDTH:0.135597
G1 X98.918 Y107.375 E0.00120 ; infill
;WIDTH:0.103641
G1 X98.566 Y107.850 E0.00298 ; infill
G1 X98.377 Y108.075 E0.00148 ; infill
G1 X98.281 Y108.159 E0.00064 ; infill
G1 X97.090 Y108.544 F10800.000 ; move to first infill point
;WIDTH:0.321126
G1 F2400.000
G1 X96.748 Y108.620 E0.00811 ; infill
;WIDTH:0.277588
G1 X96.640 Y108.658 E0.00223 ; infill
;WIDTH:0.239049
G1 X96.619 Y108.662 E0.00035 ; infill
;WIDTH:0.22896
G1 X96.494 Y108.683 E0.00197 ; infill
;WIDTH:0.184947
G1 X96.368 Y108.704 E0.00151 ; infill
;WIDTH:0.140934
G1 X96.242 Y108.725 E0.00104 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.368 Y108.704 E-0.03364 ; wipe and retract
;WIPE_END
G1 E-2.36636 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X99.019 Y111.068 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.107899
G1 F2400.000
G1 X98.635 Y110.980 E0.00213 ; infill
G1 X98.015 Y109.491 F10800.000 ; move to first infill point
;WIDTH:0.173183
G1 F2400.000
G1 X98.005 Y109.726 E0.00255 ; infill
;WIDTH:0.123238
G1 X97.998 Y109.814 E0.00059 ; infill
;WIDTH:0.110549
G1 X97.998 Y110.056 E0.00136 ; infill
G1 X97.969 Y110.256 E0.00114 ; infill
G1 X97.831 Y110.920 F10800.000 ; move to first infill point
;WIDTH:0.156691
G1 F2400.000
G1 X97.408 Y111.242 E0.00503 ; infill
;WIDTH:0.139419
G1 X96.902 Y111.640 E0.00517 ; infill
G1 X96.024 Y112.377 E0.00920 ; infill
;WIDTH:0.254377
G1 X95.882 Y112.487 E0.00317 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.024 Y112.377 E-0.04757 ; wipe and retract
;WIPE_END
G1 E-2.35243 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X95.298 Y114.630 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.221165
G1 F2400.000
G1 X95.219 Y113.805 E0.01227 ; infill
G1 X95.154 Y114.094 F10800.000 ; move to first infill point
;WIDTH:0.336408
G1 F2400.000
G1 X95.443 Y114.583 E0.01388 ; infill
;WIDTH:0.362518
G1 X95.756 Y115.006 E0.01398 ; infill
G1 X95.782 Y115.006 E0.00071 ; infill
;WIDTH:0.241477
G1 X95.970 Y114.980 E0.00312 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.782 Y115.006 E-0.04994 ; wipe and retract
;WIPE_END
G1 E-2.35006 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X108.978 Y114.105 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.201896
G1 F2400.000
G1 X109.248 Y113.863 E0.00480 ; infill
G1 X112.548 Y111.127 E0.05667 ; infill
;WIDTH:0.22581
G1 X113.118 Y110.664 E0.01116 ; infill
;WIDTH:0.236486
G1 X113.539 Y110.298 E0.00897 ; infill
;WIDTH:0.24473
G1 X113.576 Y110.262 E0.00087 ; infill
;WIDTH:0.292385
G1 X113.766 Y110.089 E0.00533 ; infill
;WIDTH:0.34004
G1 X113.956 Y109.917 E0.00635 ; infill
G1 X115.421 Y111.273 F10800.000 ; move to first infill point
;WIDTH:0.110528
G1 F2400.000
G1 X115.416 Y111.152 E0.00068 ; infill
;WIDTH:0.137877
G1 X115.406 Y111.030 E0.00097 ; infill
;WIDTH:0.165225
G1 X115.396 Y110.908 E0.00124 ; infill
;WIDTH:0.180946
G1 X115.392 Y110.650 E0.00296 ; infill
;WIDTH:0.225944
G1 X115.355 Y110.471 E0.00278 ; infill
;WIDTH:0.270944
G1 X115.318 Y110.292 E0.00347 ; infill
;WIDTH:0.315944
G1 X115.281 Y110.113 E0.00415 ; infill
G1 X115.056 Y109.442 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.503996
G1 F3600.000
G1 X114.431 Y108.817 E0.03386 ; infill
G1 X113.625 Y108.779 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.205468
G1 F2400.000
G1 X113.237 Y108.584 E0.00587 ; infill
;WIDTH:0.19355
G1 X112.845 Y108.340 E0.00578 ; infill
;WIDTH:0.155755
G1 X111.967 Y107.746 E0.00994 ; infill
;WIDTH:0.148249
G1 X111.551 Y107.476 E0.00435 ; infill
;WIDTH:0.1254
G1 X111.245 Y107.283 E0.00248 ; infill
;WIDTH:0.229275
G1 X110.443 Y106.885 E0.01387 ; infill
G1 X110.795 Y106.829 F10800.000 ; move to first infill point
;WIDTH:0.305525
G1 F2400.000
G1 X110.421 Y107.171 E0.01105 ; infill
;WIDTH:0.294619
G1 X110.129 Y107.412 E0.00794 ; infill
;WIDTH:0.254918
G1 X109.836 Y107.654 E0.00669 ; infill
;WIDTH:0.215216
G1 X109.544 Y107.895 E0.00544 ; infill
G1 X108.220 Y108.995 F10800.000 ; move to first infill point
;WIDTH:0.104107
G1 F2400.000
G1 X107.856 Y109.292 E0.00239 ; infill
G1 X107.307 Y109.741 F10800.000 ; move to first infill point
;WIDTH:0.102777
G1 F2400.000
G1 X106.390 Y110.511 E0.00596 ; infill
G1 X105.426 Y111.305 F10800.000 ; move to first infill point
;WIDTH:0.13321
G1 F2400.000
G1 X105.075 Y111.608 E0.00349 ; infill
G1 X104.763 Y111.974 E0.00361 ; infill
G1 X104.687 Y111.901 F10800.000 ; move to first infill point
;WIDTH:0.274302
G1 F2400.000
G1 X104.787 Y111.907 E0.00192 ; infill
;WIDTH:0.300747
G1 X104.887 Y111.913 E0.00214 ; infill
G1 X105.211 Y111.442 E0.01226 ; infill
G1 X104.270 Y112.191 F10800.000 ; move to first infill point
;WIDTH:0.233233
G1 F2400.000
G1 X103.657 Y112.123 E0.00976 ; infill
G1 X105.308 Y113.036 F10800.000 ; move to first infill point
;WIDTH:0.181319
G1 F2400.000
G1 X104.849 Y112.506 E0.00807 ; infill
G1 X104.808 Y112.546 F10800.000 ; move to first infill point
;WIDTH:0.108853
G1 F2400.000
G1 X105.202 Y112.912 E0.00295 ; infill
G1 X105.678 Y113.258 E0.00323 ; infill
;WIDTH:0.136821
G1 X105.935 Y113.428 E0.00240 ; infill
G1 X106.368 Y113.795 E0.00443 ; infill
G1 X106.372 Y114.836 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.460794
G1 F3600.000
G1 X106.687 Y115.151 E0.01548 ; infill
G1 X107.290 Y115.162 E0.02093 ; infill
G1 X106.674 Y114.546 E0.03026 ; infill
G1 X106.689 Y114.506 E0.00149 ; infill
G1 X107.170 Y114.793 E0.01948 ; infill
G1 X107.666 Y115.035 E0.01917 ; infill
G1 X107.738 Y115.020 E0.00256 ; infill
G1 X108.052 Y115.333 E0.01540 ; infill
G1 X109.247 Y115.373 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.245961
G1 F2400.000
G1 X109.329 Y115.543 E0.00318 ; infill
G1 X109.922 Y115.570 E0.01001 ; infill
;WIDTH:0.134484
G1 X111.389 Y115.530 E0.01118 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.922 Y115.570 E-0.38745 ; wipe and retract
;WIPE_END
G1 E-2.01255 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 X105.907 Y97.716 ; move to first infill point
G1 Z1.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.126857
G1 F2400.000
G1 X106.306 Y97.416 E0.00349 ; infill
G1 X106.618 Y97.151 E0.00286 ; infill
;WIDTH:0.139676
G1 X106.655 Y97.106 E0.00046 ; infill
G1 X106.776 Y96.836 F10800.000 ; move to first infill point
;WIDTH:0.274339
G1 F2400.000
G1 X107.589 Y96.393 E0.01782 ; infill
;LAYER_CHANGE
;Z:1.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.776 Y96.836 E-0.24436 ; wipe and retract
;WIPE_END
G1 E-2.15564 F2400.000 ; retract
G1 Z1.475 F10800.000 ; lift Z
G1 Z1.600 ; move to next layer (7)
;AFTER_LAYER_CHANGE
;1.6
G1 Z1.675 ; lift Z
G1 X105.094 Y102.760 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.707 Y102.941 E0.01978 ; perimeter
G1 X104.350 Y103.052 E0.01731 ; perimeter
G1 X103.603 Y103.333 E0.03698 ; perimeter
G1 X102.625 Y104.104 E0.05769 ; perimeter
G1 X102.864 Y103.845 E0.01631 ; perimeter
G1 X103.248 Y103.546 E0.02256 ; perimeter
G1 X103.441 Y103.132 E0.02117 ; perimeter
G1 X103.572 Y102.752 E0.01860 ; perimeter
G1 X103.592 Y102.949 E0.00918 ; perimeter
G1 X104.297 Y103.010 E0.03277 ; perimeter
G1 X104.769 Y102.820 E0.02357 ; perimeter
G1 X105.035 Y102.771 E0.01256 ; perimeter
G1 X104.725 Y102.913 F10800.000 ; move inwards before travel
G1 X105.198 Y102.734 ; move to first perimeter point
G1 F1800.000
G1 X107.072 Y102.048 E0.09244 ; perimeter
G1 X107.225 Y102.041 E0.00708 ; perimeter
G1 X106.362 Y102.377 E0.04288 ; perimeter
G1 X105.963 Y102.501 E0.01934 ; perimeter
G1 X105.531 Y102.663 E0.02139 ; perimeter
G1 X105.257 Y102.722 E0.01298 ; perimeter
G1 X105.576 Y102.603 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.072 Y102.048 E-0.51093 ; wipe and retract
G1 X107.225 Y102.041 E-0.04036 ; wipe and retract
G1 X106.362 Y102.377 E-0.24431 ; wipe and retract
G1 X105.963 Y102.501 E-0.11021 ; wipe and retract
G1 X105.531 Y102.663 E-0.12188 ; wipe and retract
G1 X105.257 Y102.722 E-0.07393 ; wipe and retract
;WIPE_END
G1 E-1.29838 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X109.538 Y100.334 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.570 Y100.283 E0.00278 ; perimeter
G1 X108.882 Y101.438 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X109.005 Y101.953 E0.02450 ; perimeter
G1 X108.999 Y102.120 E0.00776 ; perimeter
G1 X109.340 Y103.094 E0.04779 ; perimeter
G1 X109.254 Y102.963 E0.00723 ; perimeter
G1 X109.037 Y102.295 E0.03255 ; perimeter
G1 X108.614 Y101.878 E0.02753 ; perimeter
G1 X108.305 Y101.789 E0.01488 ; perimeter
G1 X108.032 Y101.857 E0.01302 ; perimeter
G1 X107.718 Y101.849 E0.01455 ; perimeter
G1 X107.386 Y101.979 E0.01652 ; perimeter
G1 X108.535 Y101.467 E0.05827 ; perimeter
G1 X109.067 Y100.961 E0.03402 ; perimeter
G1 X109.304 Y100.707 E0.01609 ; perimeter
G1 X109.069 Y101.154 E0.02341 ; perimeter
G1 X108.915 Y101.388 E0.01297 ; perimeter
G1 X108.532 Y101.632 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.005 Y101.953 E-0.15085 ; wipe and retract
G1 X108.999 Y102.120 E-0.04421 ; wipe and retract
G1 X109.340 Y103.094 E-0.27225 ; wipe and retract
G1 X109.254 Y102.963 E-0.04120 ; wipe and retract
G1 X109.037 Y102.295 E-0.18543 ; wipe and retract
G1 X108.614 Y101.878 E-0.15683 ; wipe and retract
G1 X108.305 Y101.789 E-0.08476 ; wipe and retract
G1 X108.032 Y101.857 E-0.07419 ; wipe and retract
G1 X107.718 Y101.849 E-0.08291 ; wipe and retract
G1 X107.386 Y101.979 E-0.09413 ; wipe and retract
G1 X108.535 Y101.467 E-0.33195 ; wipe and retract
G1 X109.067 Y100.961 E-0.19381 ; wipe and retract
G1 X109.304 Y100.707 E-0.09166 ; wipe and retract
G1 X109.069 Y101.154 E-0.13337 ; wipe and retract
G1 X108.915 Y101.388 E-0.07387 ; wipe and retract
;WIPE_END
G1 E-0.38859 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X109.694 Y104.065 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.580 Y103.863 E0.01074 ; perimeter
G1 X109.502 Y103.558 E0.01461 ; perimeter
G1 X109.672 Y104.009 E0.02237 ; perimeter
G1 X109.925 Y104.069 F10800.000 ; move inwards before travel
G1 X110.010 Y104.926 ; move to first perimeter point
G1 F1800.000
G1 X110.088 Y105.122 E0.00977 ; perimeter
G1 X110.034 Y105.065 E0.00360 ; perimeter
G1 X110.020 Y104.985 E0.00378 ; perimeter
G1 X109.802 Y104.895 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.088 Y105.122 E-0.04029 ; wipe and retract
G1 X110.034 Y105.065 E-0.02054 ; wipe and retract
G1 X110.020 Y104.985 E-0.02153 ; wipe and retract
;WIPE_END
G1 E-2.31765 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X102.587 Y104.134 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.597 Y105.678 E0.11670 ; perimeter
G1 X100.911 Y105.368 E0.02046 ; perimeter
G1 X101.613 Y104.852 E0.04037 ; perimeter
G1 X102.146 Y104.429 E0.03151 ; perimeter
G1 X102.537 Y104.168 E0.02180 ; perimeter
G1 X102.269 Y104.377 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.597 Y105.678 E-0.64902 ; wipe and retract
G1 X100.911 Y105.368 E-0.11657 ; wipe and retract
G1 X101.613 Y104.852 E-0.22996 ; wipe and retract
G1 X102.146 Y104.429 E-0.17949 ; wipe and retract
G1 X102.537 Y104.168 E-0.12422 ; wipe and retract
;WIPE_END
G1 E-1.10074 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X100.580 Y105.691 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.879 Y106.284 E0.04253 ; perimeter
G1 X99.390 Y106.764 E0.03175 ; perimeter
G1 X98.257 Y108.356 E0.09049 ; perimeter
G1 X98.067 Y108.893 E0.02643 ; perimeter
G1 X98.074 Y109.309 E0.01925 ; perimeter
G1 X98.021 Y109.387 E0.00440 ; perimeter
G1 X98.015 Y109.327 E0.00283 ; perimeter
G1 X97.763 Y109.170 E0.01375 ; perimeter
G1 X97.586 Y108.976 E0.01215 ; perimeter
G1 X97.277 Y108.988 E0.01433 ; perimeter
G1 X97.144 Y108.938 E0.00658 ; perimeter
G1 X96.405 Y109.061 E0.03471 ; perimeter
G1 X95.870 Y109.113 E0.02489 ; perimeter
G1 X95.301 Y109.069 E0.02642 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X95.282 Y109.088 E0.00115 ; perimeter (bridge)
G1 X95.267 Y109.027 E0.00260 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X95.312 Y108.852 E0.00840 ; perimeter
G1 X95.481 Y108.680 E0.01114 ; perimeter
G1 X95.840 Y108.470 E0.01928 ; perimeter
G1 X96.275 Y108.338 E0.02105 ; perimeter
G1 X96.526 Y108.307 E0.01171 ; perimeter
G1 X96.783 Y108.224 E0.01252 ; perimeter
G1 X97.165 Y108.169 E0.01787 ; perimeter
G1 X97.782 Y108.129 E0.02866 ; perimeter
G1 X98.305 Y108.000 E0.02495 ; perimeter
G1 X98.731 Y107.521 E0.02967 ; perimeter
G1 X99.027 Y107.018 E0.02704 ; perimeter
G1 X99.031 Y106.525 E0.02286 ; perimeter
G1 X98.733 Y106.437 E0.01437 ; perimeter
G1 X98.470 Y106.252 E0.01490 ; perimeter
G1 X97.968 Y105.997 E0.02607 ; perimeter
G1 X97.813 Y105.948 E0.00754 ; perimeter
G1 X97.657 Y105.791 E0.01027 ; perimeter
G1 X97.594 Y105.538 E0.01206 ; perimeter
G1 X97.630 Y105.381 E0.00748 ; perimeter
G1 X97.748 Y105.272 E0.00743 ; perimeter
G1 X98.125 Y105.100 E0.01917 ; perimeter
G1 X98.273 Y105.048 E0.00726 ; perimeter
G1 X98.365 Y105.047 E0.00426 ; perimeter
G1 X98.458 Y105.156 E0.00664 ; perimeter
G1 X98.650 Y105.277 E0.01052 ; perimeter
G1 X98.672 Y105.332 E0.00275 ; perimeter
G1 X98.960 Y105.602 E0.01828 ; perimeter
G1 X99.148 Y105.706 E0.00995 ; perimeter
G1 X99.248 Y105.797 E0.00627 ; perimeter
G1 X99.554 Y105.858 E0.01443 ; perimeter
G1 X99.719 Y105.956 E0.00891 ; perimeter
G1 X100.001 Y105.897 E0.01336 ; perimeter
G1 X100.244 Y105.885 E0.01124 ; perimeter
G1 X100.528 Y105.721 E0.01521 ; perimeter
G1 X100.246 Y105.911 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.879 Y106.284 E-0.22672 ; wipe and retract
G1 X99.390 Y106.764 E-0.18089 ; wipe and retract
G1 X98.257 Y108.356 E-0.51553 ; wipe and retract
G1 X98.067 Y108.893 E-0.15059 ; wipe and retract
G1 X98.074 Y109.309 E-0.10969 ; wipe and retract
G1 X98.021 Y109.387 E-0.02504 ; wipe and retract
G1 X98.015 Y109.327 E-0.01614 ; wipe and retract
G1 X97.763 Y109.170 E-0.07833 ; wipe and retract
G1 X97.586 Y108.976 E-0.06921 ; wipe and retract
G1 X97.277 Y108.988 E-0.08162 ; wipe and retract
G1 X97.144 Y108.938 E-0.03749 ; wipe and retract
G1 X96.405 Y109.061 E-0.19774 ; wipe and retract
G1 X95.870 Y109.113 E-0.14179 ; wipe and retract
G1 X95.301 Y109.069 E-0.15051 ; wipe and retract
;WIPE_END
G1 E-0.41870 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X102.172 Y100.865 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.484 Y100.507 E0.01606 ; perimeter
G1 X104.274 Y98.952 E0.08026 ; perimeter
G1 X104.626 Y98.527 E0.01867 ; perimeter
G1 X105.133 Y98.116 E0.02211 ; perimeter
G1 X104.814 Y98.442 E0.01545 ; perimeter
G1 X104.318 Y99.004 E0.02539 ; perimeter
G1 X103.580 Y99.723 E0.03487 ; perimeter
G1 X103.422 Y99.949 E0.00932 ; perimeter
G1 X103.319 Y100.188 E0.00881 ; perimeter
G1 X103.075 Y100.500 E0.01342 ; perimeter
G1 X103.027 Y100.610 E0.00405 ; perimeter
G1 X102.771 Y100.649 E0.00877 ; perimeter
G1 X102.499 Y100.749 E0.00979 ; perimeter
G1 X102.336 Y100.775 E0.00558 ; perimeter
G1 X102.225 Y100.836 E0.00430 ; perimeter
G1 X103.361 Y101.046 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.892 Y101.118 E0.02197 ; perimeter
G1 X102.621 Y101.218 E0.01338 ; perimeter
G1 X102.495 Y101.238 E0.00593 ; perimeter
G1 X101.997 Y101.512 E0.02630 ; perimeter
G1 X101.645 Y101.770 E0.02022 ; perimeter
G1 X101.333 Y102.135 E0.02223 ; perimeter
G1 X100.844 Y102.845 E0.03993 ; perimeter
G1 X100.170 Y103.577 E0.04611 ; perimeter
G1 X100.033 Y103.703 E0.00860 ; perimeter
G1 X99.684 Y103.952 E0.01987 ; perimeter
G1 X99.219 Y104.077 E0.02229 ; perimeter
G1 X99.200 Y104.066 E0.00102 ; perimeter
G1 X99.158 Y103.819 E0.01161 ; perimeter
G1 X99.281 Y103.459 E0.01763 ; perimeter
G1 X99.421 Y103.228 E0.01248 ; perimeter
G1 X99.799 Y102.767 E0.02764 ; perimeter
G1 X100.924 Y101.743 E0.07046 ; perimeter
G1 X101.290 Y101.341 E0.02520 ; perimeter
G1 X101.409 Y101.115 E0.01180 ; perimeter
G1 X101.576 Y100.905 E0.01245 ; perimeter
G1 X101.727 Y100.643 E0.01401 ; perimeter
G1 X102.140 Y100.169 E0.02913 ; perimeter
G1 X102.664 Y99.696 E0.03272 ; perimeter
G1 X103.929 Y98.613 E0.07712 ; perimeter
G1 X104.285 Y98.183 E0.02586 ; perimeter
G1 X105.163 Y97.482 E0.05203 ; perimeter
G1 X105.552 Y97.319 E0.01953 ; perimeter
G1 X105.915 Y97.210 E0.01756 ; perimeter
G1 X106.246 Y97.076 E0.01656 ; perimeter
G1 X106.391 Y96.970 E0.00830 ; perimeter
G1 X106.776 Y96.394 E0.03211 ; perimeter
G1 X106.872 Y96.301 E0.00619 ; perimeter
G1 X107.027 Y96.215 E0.00821 ; perimeter
G1 X107.232 Y96.183 E0.00960 ; perimeter
G1 X107.335 Y96.224 E0.00515 ; perimeter
G1 X107.564 Y96.240 E0.01064 ; perimeter
G1 X107.789 Y96.336 E0.01132 ; perimeter
G1 X107.815 Y96.417 E0.00392 ; perimeter
G1 X107.718 Y96.496 E0.00578 ; perimeter
G1 X107.616 Y96.765 E0.01334 ; perimeter
G1 X107.540 Y96.868 E0.00592 ; perimeter
G1 X106.696 Y97.393 E0.04602 ; perimeter
G1 X106.429 Y97.715 E0.01941 ; perimeter
G1 X106.063 Y98.065 E0.02345 ; perimeter
G1 X105.568 Y98.361 E0.02670 ; perimeter
G1 X105.167 Y98.770 E0.02654 ; perimeter
G1 X104.667 Y99.337 E0.03498 ; perimeter
G1 X103.949 Y100.037 E0.04647 ; perimeter
G1 X103.845 Y100.185 E0.00837 ; perimeter
G1 X103.737 Y100.436 E0.01264 ; perimeter
G1 X103.492 Y100.750 E0.01849 ; perimeter
G1 X103.385 Y100.991 E0.01220 ; perimeter
G1 X103.032 Y100.818 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.892 Y101.118 E-0.13437 ; wipe and retract
G1 X102.621 Y101.218 E-0.07621 ; wipe and retract
G1 X102.495 Y101.238 E-0.03378 ; wipe and retract
G1 X101.997 Y101.512 E-0.14983 ; wipe and retract
G1 X101.645 Y101.770 E-0.11521 ; wipe and retract
G1 X101.333 Y102.135 E-0.12667 ; wipe and retract
G1 X100.844 Y102.845 E-0.22750 ; wipe and retract
G1 X100.170 Y103.577 E-0.26270 ; wipe and retract
G1 X100.033 Y103.703 E-0.04899 ; wipe and retract
G1 X99.684 Y103.952 E-0.11319 ; wipe and retract
G1 X99.219 Y104.077 E-0.12697 ; wipe and retract
G1 X99.200 Y104.066 E-0.00583 ; wipe and retract
G1 X99.158 Y103.819 E-0.06612 ; wipe and retract
G1 X99.281 Y103.459 E-0.10043 ; wipe and retract
G1 X99.421 Y103.228 E-0.07112 ; wipe and retract
G1 X99.799 Y102.767 E-0.15746 ; wipe and retract
G1 X100.924 Y101.743 E-0.40138 ; wipe and retract
G1 X101.083 Y101.569 E-0.06223 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X111.100 Y107.209 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.234 Y107.361 E0.00938 ; perimeter
G1 X111.435 Y107.417 E0.00963 ; perimeter
G1 X111.564 Y107.524 E0.00779 ; perimeter
G1 X111.859 Y107.678 E0.01539 ; perimeter
G1 X112.116 Y107.918 E0.01628 ; perimeter
G1 X112.757 Y108.397 E0.03708 ; perimeter
G1 X113.095 Y108.549 E0.01718 ; perimeter
G1 X113.218 Y108.741 E0.01055 ; perimeter
G1 X113.661 Y109.115 E0.02685 ; perimeter
G1 X113.882 Y109.554 E0.02278 ; perimeter
G1 X113.357 Y110.208 E0.03884 ; perimeter
G1 X112.474 Y110.963 E0.05383 ; perimeter
G1 X110.393 Y112.681 E0.12501 ; perimeter
G1 X109.631 Y113.341 E0.04667 ; perimeter
G1 X108.968 Y113.863 E0.03911 ; perimeter
G1 X108.758 Y113.999 E0.01159 ; perimeter
G1 X108.402 Y114.310 E0.02189 ; perimeter
G1 X107.863 Y114.421 E0.02552 ; perimeter
G1 X107.635 Y114.310 E0.01174 ; perimeter
G1 X107.308 Y114.217 E0.01575 ; perimeter
G1 X106.653 Y113.800 E0.03594 ; perimeter
G1 X106.463 Y113.746 E0.00916 ; perimeter
G1 X105.910 Y113.350 E0.03152 ; perimeter
G1 X105.742 Y113.264 E0.00875 ; perimeter
G1 X105.007 Y112.690 E0.04319 ; perimeter
G1 X104.913 Y112.034 E0.03071 ; perimeter
G1 X104.954 Y111.855 E0.00849 ; perimeter
G1 X105.869 Y110.926 E0.06039 ; perimeter
G1 X106.512 Y110.462 E0.03674 ; perimeter
G1 X107.548 Y109.619 E0.06187 ; perimeter
G1 X108.296 Y108.952 E0.04642 ; perimeter
G1 X109.149 Y108.303 E0.04964 ; perimeter
G1 X109.940 Y107.563 E0.05017 ; perimeter
G1 X110.251 Y107.445 E0.01541 ; perimeter
G1 X110.397 Y107.338 E0.00840 ; perimeter
G1 X111.041 Y107.220 E0.03034 ; perimeter
G1 X111.271 Y107.100 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.234 Y107.361 E-0.06309 ; wipe and retract
G1 X111.435 Y107.417 E-0.05489 ; wipe and retract
G1 X111.564 Y107.524 E-0.04439 ; wipe and retract
G1 X111.859 Y107.678 E-0.08765 ; wipe and retract
G1 X112.116 Y107.918 E-0.09275 ; wipe and retract
G1 X112.757 Y108.397 E-0.21126 ; wipe and retract
G1 X113.095 Y108.549 E-0.09786 ; wipe and retract
G1 X113.218 Y108.741 E-0.06009 ; wipe and retract
G1 X113.661 Y109.115 E-0.15295 ; wipe and retract
G1 X113.882 Y109.554 E-0.12975 ; wipe and retract
G1 X113.357 Y110.208 E-0.22125 ; wipe and retract
G1 X112.474 Y110.963 E-0.30666 ; wipe and retract
G1 X110.393 Y112.681 E-0.71217 ; wipe and retract
G1 X110.263 Y112.793 E-0.04524 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X114.482 Y110.034 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.906 Y110.377 E0.02524 ; perimeter
G1 X115.028 Y110.774 E0.01924 ; perimeter
G1 X115.066 Y111.943 E0.05418 ; perimeter
G1 X114.920 Y113.841 E0.08816 ; perimeter
G1 X114.800 Y114.598 E0.03550 ; perimeter
G1 X114.450 Y115.049 E0.02646 ; perimeter
G1 X113.535 Y115.145 E0.04260 ; perimeter
G1 X109.901 Y115.180 E0.16832 ; perimeter
G1 X109.478 Y115.168 E0.01961 ; perimeter
G1 X109.351 Y115.074 E0.00733 ; perimeter
G1 X109.246 Y115.058 E0.00492 ; perimeter
G1 X108.987 Y114.861 E0.01507 ; perimeter
G1 X108.981 Y114.699 E0.00752 ; perimeter
G1 X108.882 Y114.461 E0.01194 ; perimeter
G1 X109.494 Y113.889 E0.03881 ; perimeter
G1 X111.282 Y112.398 E0.10786 ; perimeter
G1 X113.485 Y110.605 E0.13156 ; perimeter
G1 X113.644 Y110.438 E0.01067 ; perimeter
G1 X114.149 Y110.095 E0.02831 ; perimeter
G1 X114.296 Y110.120 E0.00687 ; perimeter
G1 X114.428 Y110.059 E0.00674 ; perimeter
G1 X114.800 Y109.791 F10800.000 ; move inwards before travel
G1 X114.413 Y109.535 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.176 Y109.066 E0.01777 ; perimeter
G1 X114.312 Y109.073 E0.00460 ; perimeter
G1 X114.773 Y108.602 E0.02229 ; perimeter
G1 X114.959 Y108.211 E0.01467 ; perimeter
G1 X114.979 Y108.014 E0.00671 ; perimeter
G1 X115.051 Y107.764 E0.00878 ; perimeter
G1 X115.100 Y107.492 E0.00936 ; perimeter
G1 X115.272 Y110.053 E0.08689 ; perimeter
G1 X114.552 Y109.471 E0.03135 ; perimeter
G1 X114.467 Y109.510 E0.00317 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.176 Y109.066 E-0.14003 ; wipe and retract
G1 X114.312 Y109.073 E-0.03584 ; wipe and retract
G1 X114.773 Y108.602 E-0.17376 ; wipe and retract
G1 X114.959 Y108.211 E-0.11436 ; wipe and retract
G1 X114.979 Y108.014 E-0.05231 ; wipe and retract
G1 X115.051 Y107.764 E-0.06842 ; wipe and retract
G1 X115.100 Y107.492 E-0.07296 ; wipe and retract
G1 X115.272 Y110.053 E-0.67739 ; wipe and retract
G1 X114.552 Y109.471 E-0.24439 ; wipe and retract
G1 X114.467 Y109.510 E-0.02474 ; wipe and retract
;WIPE_END
G1 E-0.79580 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X108.494 Y114.784 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.514 Y115.107 E0.01096 ; perimeter
G1 X109.042 Y115.508 E0.02246 ; perimeter
G1 X107.933 Y115.540 E0.03757 ; perimeter
G1 X96.950 Y115.530 E0.37175 ; perimeter
G1 X96.410 Y115.469 E0.01841 ; perimeter
G1 X96.149 Y115.348 E0.00972 ; perimeter
G1 X96.082 Y115.272 E0.00342 ; perimeter
G1 X96.408 Y115.425 E0.01220 ; perimeter
G1 X97.034 Y115.446 E0.02120 ; perimeter
G1 X101.733 Y115.448 E0.15903 ; perimeter
G1 X103.908 Y115.404 E0.07365 ; perimeter
G1 X105.078 Y115.314 E0.03972 ; perimeter
G1 X105.216 Y115.278 E0.00483 ; perimeter
G1 X105.998 Y115.223 E0.02654 ; perimeter
G1 X106.487 Y114.852 E0.02076 ; perimeter
G1 X106.679 Y114.388 E0.01700 ; perimeter
G1 X107.108 Y114.662 E0.01722 ; perimeter
G1 X107.462 Y114.762 E0.01246 ; perimeter
G1 X107.799 Y114.926 E0.01268 ; perimeter
G1 X108.435 Y114.796 E0.02198 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.514 Y115.107 E-0.08470 ; wipe and retract
G1 X109.042 Y115.508 E-0.17512 ; wipe and retract
G1 X107.933 Y115.540 E-0.29288 ; wipe and retract
G1 X101.387 Y115.534 E-1.72730 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X95.141 Y112.999 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.961 Y113.367 E0.01386 ; perimeter
G1 X94.945 Y113.528 E0.00550 ; perimeter
G1 X94.794 Y113.223 E0.01152 ; perimeter
G1 X94.714 Y112.965 E0.00914 ; perimeter
G1 X94.724 Y112.783 E0.00618 ; perimeter
G1 X95.088 Y112.971 E0.01387 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.961 Y113.367 E-0.10958 ; wipe and retract
G1 X94.945 Y113.528 E-0.04289 ; wipe and retract
G1 X94.794 Y113.223 E-0.08980 ; wipe and retract
G1 X94.714 Y112.965 E-0.07124 ; wipe and retract
G1 X94.724 Y112.783 E-0.04818 ; wipe and retract
G1 X95.088 Y112.971 E-0.10810 ; wipe and retract
;WIPE_END
G1 E-1.93022 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X114.041 Y95.837 ; move to first perimeter point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.106 Y95.761 E0.00337 ; perimeter
G1 X114.446 Y95.522 E0.01408 ; perimeter
G1 X114.489 Y95.270 E0.00866 ; perimeter
G1 X114.522 Y95.375 E0.00376 ; perimeter
G1 X114.636 Y96.259 E0.03014 ; perimeter
G1 X114.138 Y95.837 E0.02208 ; perimeter
G1 X114.101 Y95.837 E0.00125 ; perimeter
G1 X113.961 Y96.319 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X113.461 Y96.317 E0.02316 ; perimeter
G1 X113.063 Y96.430 E0.01915 ; perimeter
G1 X112.896 Y96.446 E0.00776 ; perimeter
G1 X112.517 Y96.568 E0.01846 ; perimeter
G1 X112.245 Y96.551 E0.01260 ; perimeter
G1 X111.950 Y96.753 E0.01657 ; perimeter
G1 X111.950 Y96.653 E0.00462 ; perimeter
G1 X112.379 Y96.310 E0.02544 ; perimeter
G1 X112.697 Y96.106 E0.01750 ; perimeter
G1 X112.810 Y96.055 E0.00577 ; perimeter
G1 X113.158 Y95.818 E0.01946 ; perimeter
G1 X113.662 Y95.538 E0.02674 ; perimeter
G1 X113.778 Y95.402 E0.00825 ; perimeter
G1 X114.005 Y95.243 E0.01285 ; perimeter
G1 X114.058 Y94.932 E0.01460 ; perimeter
G1 X113.920 Y94.486 E0.02159 ; perimeter
G1 X113.788 Y94.454 E0.00630 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X113.332 Y94.342 E0.01962 ; perimeter (bridge)
G1 X112.912 Y94.497 E0.01869 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X112.078 Y94.803 E0.04115 ; perimeter
G1 X111.948 Y94.792 E0.00604 ; perimeter
G1 X111.625 Y94.890 E0.01566 ; perimeter
G1 X111.331 Y94.898 E0.01364 ; perimeter
G1 X110.907 Y95.061 E0.02104 ; perimeter
G1 X110.873 Y95.167 E0.00515 ; perimeter
G1 X110.620 Y95.358 E0.01468 ; perimeter
G1 X110.641 Y95.448 E0.00431 ; perimeter
G1 X110.533 Y95.612 E0.00908 ; perimeter
G1 X110.511 Y95.679 E0.00326 ; perimeter
G1 X110.272 Y95.690 E0.01112 ; perimeter
G1 X110.169 Y95.670 E0.00484 ; perimeter
G1 X109.562 Y95.709 E0.02817 ; perimeter
G1 X109.393 Y95.666 E0.00808 ; perimeter
G1 X109.346 Y95.556 E0.00557 ; perimeter
G1 X109.425 Y95.331 E0.01103 ; perimeter
G1 X109.642 Y95.020 E0.01755 ; perimeter
G1 X110.069 Y94.596 E0.02786 ; perimeter
G1 X110.359 Y94.398 E0.01629 ; perimeter
G1 X110.612 Y94.257 E0.01341 ; perimeter
G1 X110.854 Y94.165 E0.01199 ; perimeter
G1 X111.420 Y94.085 E0.02647 ; perimeter
G1 X111.839 Y94.070 E0.01944 ; perimeter
G1 X112.249 Y94.101 E0.01902 ; perimeter
G1 X112.863 Y94.221 E0.02903 ; perimeter
G1 X112.946 Y94.222 E0.00380 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X114.068 Y94.230 E0.04693 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X114.467 Y94.270 E0.01854 ; perimeter
G1 X114.592 Y94.342 E0.00669 ; perimeter
G1 X114.734 Y94.501 E0.00989 ; perimeter
G1 X114.832 Y94.723 E0.01124 ; perimeter
G1 X114.884 Y94.981 E0.01218 ; perimeter
G1 X114.959 Y95.134 E0.00792 ; perimeter
G1 X114.998 Y95.289 E0.00737 ; perimeter
G1 X115.089 Y96.062 E0.03604 ; perimeter
G1 X115.227 Y96.788 E0.03424 ; perimeter
G1 X115.501 Y98.489 E0.07983 ; perimeter
G1 X115.592 Y99.266 E0.03622 ; perimeter
G1 X115.622 Y100.871 E0.07437 ; perimeter
G1 X115.592 Y103.438 E0.11892 ; perimeter
G1 X115.539 Y105.690 E0.10433 ; perimeter
G1 X115.551 Y107.045 E0.06279 ; perimeter
G1 X115.748 Y109.814 E0.12856 ; perimeter
G1 X115.789 Y111.314 E0.06951 ; perimeter
G1 X115.767 Y112.035 E0.03345 ; perimeter
G1 X115.739 Y112.287 E0.01174 ; perimeter
G1 X115.407 Y114.778 E0.11640 ; perimeter
G1 X115.267 Y115.387 E0.02894 ; perimeter
G1 X115.155 Y115.562 E0.00962 ; perimeter
G1 X114.477 Y115.717 E0.03218 ; perimeter
G1 X114.144 Y115.757 E0.01558 ; perimeter
G1 X109.842 Y115.967 E0.19948 ; perimeter
G1 X107.940 Y116.022 E0.08817 ; perimeter
G1 X96.927 Y116.012 E0.51010 ; perimeter
G1 X96.390 Y115.961 E0.02498 ; perimeter
G1 X96.276 Y115.932 E0.00549 ; perimeter
G1 X96.135 Y115.886 E0.00684 ; perimeter
G1 X95.847 Y115.732 E0.01514 ; perimeter
G1 X95.628 Y115.487 E0.01522 ; perimeter
G1 X95.522 Y115.335 E0.00857 ; perimeter
G1 X95.446 Y115.186 E0.00775 ; perimeter
G1 X95.226 Y114.865 E0.01805 ; perimeter
G1 X94.934 Y114.384 E0.02607 ; perimeter
G1 X94.775 Y114.171 E0.01231 ; perimeter
G1 X94.462 Y113.664 E0.02760 ; perimeter
G1 X94.342 Y113.392 E0.01375 ; perimeter
G1 X94.238 Y113.057 E0.01628 ; perimeter
G1 X94.228 Y112.930 E0.00588 ; perimeter
G1 X94.256 Y112.592 E0.01574 ; perimeter
G1 X94.365 Y112.332 E0.01303 ; perimeter
G1 X94.545 Y112.182 E0.01087 ; perimeter
G1 X94.691 Y112.223 E0.00699 ; perimeter
G1 X95.230 Y112.502 E0.02815 ; perimeter
G1 X95.699 Y112.320 E0.02329 ; perimeter
G1 X97.292 Y111.196 E0.09031 ; perimeter
G1 X97.705 Y110.774 E0.02733 ; perimeter
G1 X97.879 Y110.556 E0.01294 ; perimeter
G1 X97.922 Y110.280 E0.01295 ; perimeter
G1 X98.033 Y109.835 E0.02123 ; perimeter
G1 X98.059 Y110.569 E0.03402 ; perimeter
G1 X98.274 Y110.677 E0.01114 ; perimeter
G1 X98.602 Y110.989 E0.02097 ; perimeter
G1 X98.873 Y111.055 E0.01294 ; perimeter
G1 X98.535 Y111.019 E0.01573 ; perimeter
G1 X98.286 Y110.948 E0.01202 ; perimeter
G1 X97.398 Y111.351 E0.04517 ; perimeter
G1 X96.532 Y112.202 E0.05626 ; perimeter
G1 X95.686 Y112.982 E0.05330 ; perimeter
G1 X95.432 Y113.501 E0.02674 ; perimeter
G1 X95.411 Y113.710 E0.00973 ; perimeter
G1 X95.502 Y113.864 E0.00829 ; perimeter
G1 X95.683 Y114.416 E0.02689 ; perimeter
G1 X96.072 Y114.770 E0.02436 ; perimeter
G1 X96.234 Y114.811 E0.00776 ; perimeter
G1 X96.523 Y114.947 E0.01481 ; perimeter
G1 X97.042 Y114.964 E0.02406 ; perimeter
G1 X101.728 Y114.966 E0.21703 ; perimeter
G1 X103.885 Y114.922 E0.09993 ; perimeter
G1 X104.998 Y114.837 E0.05170 ; perimeter
G1 X105.137 Y114.800 E0.00669 ; perimeter
G1 X105.821 Y114.752 E0.03176 ; perimeter
G1 X106.091 Y114.547 E0.01571 ; perimeter
G1 X106.296 Y114.055 E0.02470 ; perimeter
G1 X106.196 Y113.756 E0.01460 ; perimeter
G1 X105.756 Y113.330 E0.02838 ; perimeter
G1 X105.164 Y112.946 E0.03268 ; perimeter
G1 X104.727 Y112.540 E0.02760 ; perimeter
G1 X104.340 Y112.395 E0.01915 ; perimeter
G1 X103.811 Y112.138 E0.02725 ; perimeter
G1 X103.966 Y112.107 E0.00732 ; perimeter
G1 X104.392 Y112.086 E0.01974 ; perimeter
G1 X105.817 Y110.954 E0.08428 ; perimeter
G1 X108.263 Y108.878 E0.14863 ; perimeter
G1 X108.621 Y108.649 E0.01971 ; perimeter
G1 X109.564 Y107.794 E0.05895 ; perimeter
G1 X109.997 Y107.463 E0.02523 ; perimeter
G1 X110.265 Y107.183 E0.01798 ; perimeter
G1 X110.355 Y106.912 E0.01323 ; perimeter
G1 X110.533 Y106.727 E0.01187 ; perimeter
G1 X110.531 Y106.311 E0.01930 ; perimeter
G1 X110.338 Y105.874 E0.02210 ; perimeter
G1 X110.332 Y105.801 E0.00342 ; perimeter
G1 X110.407 Y106.009 E0.01028 ; perimeter
G1 X110.856 Y106.974 E0.04928 ; perimeter
G1 X111.067 Y107.085 E0.01105 ; perimeter
G1 X111.236 Y107.286 E0.01217 ; perimeter
G1 X111.665 Y107.469 E0.02163 ; perimeter
G1 X112.184 Y107.832 E0.02932 ; perimeter
G1 X112.549 Y108.037 E0.01939 ; perimeter
G1 X112.900 Y108.310 E0.02059 ; perimeter
G1 X113.720 Y108.642 E0.04100 ; perimeter
G1 X113.853 Y108.569 E0.00699 ; perimeter
G1 X114.118 Y108.581 E0.01232 ; perimeter
G1 X114.372 Y108.322 E0.01679 ; perimeter
G1 X114.488 Y108.078 E0.01251 ; perimeter
G1 X114.504 Y107.921 E0.00731 ; perimeter
G1 X114.581 Y107.655 E0.01283 ; perimeter
G1 X114.732 Y106.812 E0.03968 ; perimeter
G1 X114.762 Y106.419 E0.01823 ; perimeter
G1 X114.759 Y105.675 E0.03450 ; perimeter
G1 X114.797 Y104.875 E0.03710 ; perimeter
G1 X114.817 Y102.362 E0.11637 ; perimeter
G1 X114.913 Y100.055 E0.10696 ; perimeter
G1 X114.908 Y99.422 E0.02934 ; perimeter
G1 X114.846 Y98.835 E0.02733 ; perimeter
G1 X114.801 Y98.690 E0.00706 ; perimeter
G1 X114.401 Y96.692 E0.09438 ; perimeter
G1 X114.006 Y96.357 E0.02396 ; perimeter
G1 X113.916 Y95.921 F10800.000 ; move inwards before travel
G1 X113.633 Y95.946 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.165747
G1 F2400.000
G1 X113.308 Y96.062 E0.00353 ; infill
;WIDTH:0.133777
G1 X113.179 Y96.123 E0.00107 ; infill
G1 X113.377 Y96.090 F10800.000 ; move to first infill point
;WIDTH:0.130257
G1 F2400.000
G1 X113.723 Y95.806 E0.00326 ; infill
G1 X114.814 Y96.725 F10800.000 ; move to first infill point
;WIDTH:0.254859
G1 F2400.000
G1 X115.187 Y98.776 E0.03673 ; infill
G1 X115.251 Y99.397 E0.01101 ; infill
G1 X115.260 Y100.064 E0.01174 ; infill
;WIDTH:0.303269
G1 X115.251 Y100.873 E0.01751 ; infill
;WIDTH:0.321736
G1 X115.177 Y104.888 E0.09311 ; infill
;WIDTH:0.344656
G1 X115.149 Y105.683 E0.01996 ; infill
G1 X115.154 Y106.440 E0.01899 ; infill
;WIDTH:0.383
G1 X115.138 Y106.872 E0.01224 ; infill
;WIDTH:0.418872
G1 X115.122 Y107.064 E0.00600 ; infill
G1 X115.322 Y107.263 E0.00882 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.122 Y107.064 E-0.07445 ; wipe and retract
G1 X115.138 Y106.872 E-0.05068 ; wipe and retract
;WIPE_END
G1 E-2.27487 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X113.915 Y109.935 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.123002
G1 F2400.000
G1 X113.990 Y109.866 E0.00068 ; infill
;WIDTH:0.149084
G1 X114.065 Y109.797 E0.00090 ; infill
;WIDTH:0.182913
G1 X114.106 Y109.772 E0.00057 ; infill
;WIDTH:0.229605
G1 X114.237 Y109.722 E0.00217 ; infill
G1 X115.353 Y110.429 F10800.000 ; move to first infill point
;WIDTH:0.327286
G1 F2400.000
G1 X115.396 Y110.694 E0.00637 ; infill
;WIDTH:0.312247
G1 X115.417 Y111.313 E0.01386 ; infill
;WIDTH:0.304359
G1 X115.418 Y111.945 E0.01374 ; infill
;WIDTH:0.264189
G1 X115.307 Y113.059 E0.02061 ; infill
;WIDTH:0.213248
G1 X115.222 Y113.874 E0.01159 ; infill
;WIDTH:0.16754
G1 X115.098 Y114.722 E0.00889 ; infill
G1 X114.839 Y115.393 E0.00745 ; infill
G1 X115.068 Y115.176 F10800.000 ; move to first infill point
;WIDTH:0.233095
G1 F2400.000
G1 X114.586 Y115.361 E0.00817 ; infill
G1 X114.115 Y115.422 E0.00750 ; infill
G1 X113.557 Y115.465 E0.00885 ; infill
;WIDTH:0.201199
G1 X112.333 Y115.501 E0.01611 ; infill
;WIDTH:0.296969
G1 X109.901 Y115.572 E0.05141 ; infill
G1 X109.274 Y115.573 E0.01323 ; infill
G1 X108.372 Y115.324 F10800.000 ; move to first infill point
;WIDTH:0.221123
G1 F2400.000
G1 X108.178 Y115.194 E0.00346 ; infill
G1 X107.792 Y115.237 E0.00575 ; infill
G1 X107.469 Y115.216 E0.00480 ; infill
G1 X107.010 Y114.744 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.531415
G1 F3600.000
G1 X106.338 Y115.416 E0.03862 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.010 Y114.744 E-0.25093 ; wipe and retract
;WIPE_END
G1 E-2.14907 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X95.878 Y115.142 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.319434
G1 F2400.000
G1 X95.772 Y115.003 E0.00403 ; infill
;WIDTH:0.308195
G1 X95.630 Y114.839 E0.00478 ; infill
;WIDTH:0.257605
G1 X95.499 Y114.689 E0.00356 ; infill
;WIDTH:0.212166
G1 X95.428 Y114.601 E0.00159 ; infill
;WIDTH:0.179889
G1 X95.321 Y114.380 E0.00279 ; infill
;WIDTH:0.274338
G1 X95.148 Y114.025 E0.00761 ; infill
G1 X94.987 Y113.766 E0.00587 ; infill
G1 X95.453 Y112.889 F10800.000 ; move to first infill point
;WIDTH:0.135396
G1 F2400.000
G1 X95.425 Y112.777 E0.00088 ; infill
G1 X95.718 Y112.595 E0.00265 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.425 Y112.777 E-0.09107 ; wipe and retract
G1 X95.453 Y112.889 E-0.03024 ; wipe and retract
;WIPE_END
G1 E-2.27869 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X95.718 Y108.823 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.255646
G1 F2400.000
G1 X96.034 Y108.760 E0.00571 ; infill
;WIDTH:0.285181
G1 X96.615 Y108.659 E0.01187 ; infill
;WIDTH:0.323522
G1 X97.146 Y108.554 E0.01262 ; infill
;WIDTH:0.334916
G1 X97.902 Y108.637 E0.01847 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.146 Y108.554 E-0.20075 ; wipe and retract
;WIPE_END
G1 E-2.19925 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X99.385 Y106.431 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.394415
G1 F2400.000
G1 X98.904 Y106.048 E0.01797 ; infill
G1 X98.737 Y105.943 E0.00576 ; infill
;WIDTH:0.373548
G1 X98.453 Y105.741 E0.00960 ; infill
G1 X98.369 Y105.860 F10800.000 ; move to first infill point
;WIDTH:0.335284
G1 F2400.000
G1 X99.109 Y106.154 E0.01936 ; infill
G1 X99.314 Y106.205 E0.00514 ; infill
;WIDTH:0.353575
G1 X99.373 Y106.226 E0.00159 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.314 Y106.205 E-0.01629 ; wipe and retract
;WIPE_END
G1 E-2.38371 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X99.470 Y103.760 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.195848
G1 F2400.000
G1 X99.560 Y103.654 E0.00177 ; infill
;WIDTH:0.206261
G1 X99.570 Y103.642 E0.00021 ; infill
;WIDTH:0.232402
G1 X99.590 Y103.614 E0.00055 ; infill
;WIDTH:0.250961
G1 X99.605 Y103.591 E0.00047 ; infill
;WIDTH:0.287642
G1 X99.669 Y103.520 E0.00195 ; infill
;WIDTH:0.325736
G1 X100.684 Y102.445 E0.03478 ; infill
;WIDTH:0.228169
G1 X100.965 Y102.123 E0.00657 ; infill
;WIDTH:0.11252
G1 X101.460 Y101.564 E0.00432 ; infill
;WIDTH:0.132526
G1 X101.993 Y101.026 E0.00564 ; infill
G1 X101.996 Y101.030 F10800.000 ; move to first infill point
;WIDTH:0.290344
G1 F2400.000
G1 X101.303 Y101.685 E0.01962 ; infill
G1 X101.500 Y101.461 F10800.000 ; move to first infill point
;WIDTH:0.332921
G1 F2400.000
G1 X101.890 Y101.130 E0.01235 ; infill
G1 X101.880 Y100.886 E0.00588 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.890 Y101.130 E-0.06437 ; wipe and retract
G1 X101.500 Y101.461 E-0.13512 ; wipe and retract
;WIPE_END
G1 E-2.20051 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X106.309 Y97.483 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.471396
G1 F2400.000
G1 X105.706 Y97.748 E0.02347 ; infill
G1 X105.308 Y97.950 E0.01589 ; infill
G1 X105.346 Y97.992 F10800.000 ; move to first infill point
;WIDTH:0.282635
G1 F2400.000
G1 X106.471 Y97.287 E0.02645 ; infill
G1 X106.664 Y96.996 F10800.000 ; move to first infill point
;WIDTH:0.392671
G1 F2400.000
G1 X107.165 Y96.613 E0.01834 ; infill
;WIDTH:0.299373
G1 X107.285 Y96.591 E0.00261 ; infill
G1 X107.454 Y96.513 E0.00397 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.285 Y96.591 E-0.04911 ; wipe and retract
G1 X107.165 Y96.613 E-0.03225 ; wipe and retract
;WIPE_END
G1 E-2.31864 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 X110.523 Y94.817 ; move to first infill point
G1 Z1.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.354747
G1 F2400.000
G1 X110.580 Y94.756 E0.00217 ; infill
G1 X110.793 Y94.646 E0.00621 ; infill
G1 X110.961 Y94.582 E0.00466 ; infill
G1 X111.279 Y94.504 E0.00847 ; infill
;WIDTH:0.372786
G1 X111.683 Y94.466 E0.01113 ; infill
;WIDTH:0.27014
G1 X111.932 Y94.436 E0.00474 ; infill
G1 X112.306 Y94.463 E0.00709 ; infill
;LAYER_CHANGE
;Z:1.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.932 Y94.436 E-0.09903 ; wipe and retract
G1 X111.683 Y94.466 E-0.06619 ; wipe and retract
;WIPE_END
G1 E-2.23478 F2400.000 ; retract
G1 Z1.675 F10800.000 ; lift Z
G1 Z1.800 ; move to next layer (8)
;AFTER_LAYER_CHANGE
;1.8
G1 Z1.875 ; lift Z
G1 X97.813 Y108.359 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.736 Y108.619 E0.01258 ; perimeter
G1 X97.490 Y108.796 E0.01406 ; perimeter
G1 X97.284 Y108.796 E0.00951 ; perimeter
G1 X96.875 Y108.968 E0.02058 ; perimeter
G1 X96.134 Y109.151 E0.03533 ; perimeter
G1 X95.710 Y109.210 E0.01985 ; perimeter
G1 X95.511 Y109.307 E0.01025 ; perimeter
G1 X95.361 Y109.300 E0.00694 ; perimeter
G1 X95.125 Y109.611 E0.01812 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X94.900 Y109.933 E0.01641 ; perimeter (bridge)
G1 X94.893 Y109.463 E0.01965 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X94.890 Y109.259 E0.00948 ; perimeter
G1 X94.916 Y109.012 E0.01147 ; perimeter
G1 X94.989 Y108.873 E0.00730 ; perimeter
G1 X95.217 Y108.637 E0.01516 ; perimeter
G1 X95.616 Y108.425 E0.02096 ; perimeter
G1 X95.703 Y108.391 E0.00432 ; perimeter
G1 X95.923 Y108.386 E0.01021 ; perimeter
G1 X96.064 Y108.344 E0.00678 ; perimeter
G1 X96.654 Y108.277 E0.02752 ; perimeter
G1 X97.318 Y108.260 E0.03079 ; perimeter
G1 X97.755 Y108.345 E0.02059 ; perimeter
G1 X97.630 Y108.559 F10800.000 ; move inwards before travel
G1 X97.254 Y108.525 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.134775
G1 F2400.000
G1 X96.906 Y108.594 E0.00272 ; infill
;WIDTH:0.248338
G1 X96.411 Y108.689 E0.00860 ; infill
;WIDTH:0.35971
G1 X96.004 Y108.772 E0.01096 ; infill
;WIDTH:0.347676
G1 X95.783 Y108.792 E0.00561 ; infill
G1 X95.795 Y108.630 F10800.000 ; move to first infill point
;WIDTH:0.125717
G1 F2400.000
G1 X95.219 Y109.032 E0.00484 ; infill
;WIDTH:0.112496
G1 X95.179 Y109.092 E0.00042 ; infill
;WIDTH:0.10145
G1 X95.166 Y109.125 E0.00017 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.179 Y109.092 E-0.00935 ; wipe and retract
;WIPE_END
G1 E-2.39065 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X102.468 Y100.537 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.871 Y100.135 E0.01926 ; perimeter
G1 X103.033 Y100.007 E0.00698 ; perimeter
G1 X102.514 Y100.498 E0.02418 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.871 Y100.135 E-0.13434 ; wipe and retract
G1 X103.033 Y100.007 E-0.05445 ; wipe and retract
G1 X102.514 Y100.498 E-0.18851 ; wipe and retract
;WIPE_END
G1 E-2.02270 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X104.451 Y98.759 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.609 Y98.614 E0.00723 ; perimeter
G1 X104.498 Y98.721 E0.00521 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.609 Y98.614 E-0.04062 ; wipe and retract
G1 X104.498 Y98.721 E-0.04062 ; wipe and retract
;WIPE_END
G1 E-2.31877 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X98.252 Y105.360 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.283 Y105.393 E0.00153 ; perimeter
G1 X98.394 Y105.669 E0.01009 ; perimeter
G1 X98.086 Y105.627 E0.01051 ; perimeter
G1 X97.947 Y105.573 E0.00505 ; perimeter
G1 X98.070 Y105.466 E0.00548 ; perimeter
G1 X98.200 Y105.391 E0.00510 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.283 Y105.393 E-0.02198 ; wipe and retract
G1 X98.394 Y105.669 E-0.07868 ; wipe and retract
G1 X98.086 Y105.627 E-0.08198 ; wipe and retract
G1 X97.947 Y105.573 E-0.03933 ; wipe and retract
G1 X98.070 Y105.466 E-0.04272 ; wipe and retract
G1 X98.200 Y105.391 E-0.03974 ; wipe and retract
;WIPE_END
G1 E-2.09557 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X105.376 Y98.391 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.090 Y98.792 E0.02283 ; perimeter
G1 X104.895 Y99.021 E0.01393 ; perimeter
G1 X104.148 Y99.616 E0.04425 ; perimeter
G1 X102.829 Y100.863 E0.08404 ; perimeter
G1 X102.664 Y101.003 E0.01003 ; perimeter
G1 X101.675 Y101.641 E0.05456 ; perimeter
G1 X101.327 Y102.056 E0.02508 ; perimeter
G1 X101.073 Y102.470 E0.02248 ; perimeter
G1 X100.682 Y103.044 E0.03220 ; perimeter
G1 X100.260 Y103.518 E0.02938 ; perimeter
G1 X100.011 Y103.727 E0.01506 ; perimeter
G1 X99.697 Y104.042 E0.02060 ; perimeter
G1 X99.517 Y104.159 E0.00996 ; perimeter
G1 X99.198 Y104.256 E0.01542 ; perimeter
G1 X99.012 Y104.418 E0.01144 ; perimeter
G1 X98.874 Y104.437 E0.00647 ; perimeter
G1 X98.867 Y104.453 E0.00080 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.748 Y104.726 E0.01245 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.612 Y105.040 E0.01583 ; perimeter
G1 X98.723 Y105.154 E0.00738 ; perimeter
G1 X98.756 Y105.299 E0.00691 ; perimeter
G1 X98.901 Y105.620 E0.01632 ; perimeter
G1 X99.047 Y105.701 E0.00774 ; perimeter
G1 X99.155 Y105.798 E0.00671 ; perimeter
G1 X99.262 Y105.967 E0.00928 ; perimeter
G1 X99.408 Y106.099 E0.00912 ; perimeter
G1 X99.424 Y106.186 E0.00407 ; perimeter
G1 X99.336 Y106.279 E0.00596 ; perimeter
G1 X98.985 Y106.361 E0.01671 ; perimeter
G1 X98.621 Y106.256 E0.01754 ; perimeter
G1 X98.358 Y106.151 E0.01311 ; perimeter
G1 X97.964 Y106.097 E0.01840 ; perimeter
G1 X97.713 Y105.999 E0.01248 ; perimeter
G1 X97.545 Y105.974 E0.00787 ; perimeter
G1 X97.429 Y105.867 E0.00730 ; perimeter
G1 X97.394 Y105.766 E0.00496 ; perimeter
G1 X97.445 Y105.468 E0.01399 ; perimeter
G1 X97.559 Y105.272 E0.01053 ; perimeter
G1 X97.788 Y105.073 E0.01402 ; perimeter
G1 X98.139 Y104.868 E0.01883 ; perimeter
G1 X98.257 Y104.826 E0.00584 ; perimeter
G1 X98.647 Y104.608 E0.02066 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.691 Y104.584 E0.00211 ; perimeter (bridge)
G1 X98.793 Y104.433 E0.00763 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.878 Y104.307 E0.00704 ; perimeter
G1 X98.880 Y104.149 E0.00730 ; perimeter
G1 X98.964 Y103.902 E0.01209 ; perimeter
G1 X99.065 Y103.760 E0.00806 ; perimeter
G1 X99.141 Y103.579 E0.00912 ; perimeter
G1 X99.348 Y103.287 E0.01656 ; perimeter
G1 X99.774 Y102.809 E0.02966 ; perimeter
G1 X100.933 Y101.789 E0.07150 ; perimeter
G1 X101.365 Y101.323 E0.02943 ; perimeter
G1 X101.520 Y101.012 E0.01610 ; perimeter
G1 X101.760 Y100.603 E0.02200 ; perimeter
G1 X102.062 Y100.261 E0.02113 ; perimeter
G1 X102.550 Y99.774 E0.03191 ; perimeter
G1 X103.258 Y99.213 E0.04188 ; perimeter
G1 X103.490 Y98.959 E0.01591 ; perimeter
G1 X103.975 Y98.575 E0.02867 ; perimeter
G1 X104.167 Y98.347 E0.01383 ; perimeter
G1 X104.439 Y98.135 E0.01595 ; perimeter
G1 X104.722 Y98.002 E0.01448 ; perimeter
G1 X105.101 Y97.656 E0.02381 ; perimeter
G1 X105.156 Y97.579 E0.00435 ; perimeter
G1 X105.390 Y97.399 E0.01371 ; perimeter
G1 X106.068 Y97.125 E0.03385 ; perimeter
G1 X106.352 Y96.985 E0.01468 ; perimeter
G1 X106.763 Y96.403 E0.03298 ; perimeter
G1 X106.939 Y96.265 E0.01038 ; perimeter
G1 X107.078 Y96.205 E0.00700 ; perimeter
G1 X107.194 Y96.186 E0.00543 ; perimeter
G1 X107.309 Y96.191 E0.00531 ; perimeter
G1 X107.535 Y96.273 E0.01115 ; perimeter
G1 X107.654 Y96.415 E0.00860 ; perimeter
G1 X107.700 Y96.597 E0.00868 ; perimeter
G1 X107.644 Y96.734 E0.00688 ; perimeter
G1 X107.478 Y96.923 E0.01164 ; perimeter
G1 X106.830 Y97.351 E0.03600 ; perimeter
G1 X106.234 Y97.949 E0.03909 ; perimeter
G1 X105.784 Y98.231 E0.02459 ; perimeter
G1 X105.432 Y98.369 E0.01755 ; perimeter
G1 X104.988 Y98.290 F10800.000 ; move inwards before travel
G1 X105.477 Y97.882 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.437227
G1 F2400.000
G1 X106.484 Y97.356 E0.03726 ; infill
G1 X106.212 Y97.458 F10800.000 ; move to first infill point
;WIDTH:0.282356
G1 F2400.000
G1 X106.326 Y97.376 E0.00279 ; infill
;WIDTH:0.15393
G1 X106.558 Y97.205 E0.00266 ; infill
;WIDTH:0.174194
G1 X106.640 Y97.108 E0.00138 ; infill
;WIDTH:0.218362
G1 X106.726 Y97.026 E0.00174 ; infill
;WIDTH:0.26253
G1 X106.812 Y96.943 E0.00218 ; infill
;WIDTH:0.306697
G1 X106.897 Y96.860 E0.00262 ; infill
;WIDTH:0.350864
G1 X106.983 Y96.777 E0.00306 ; infill
;WIDTH:0.379785
G1 X107.157 Y96.631 E0.00635 ; infill
G1 X107.411 Y96.515 E0.00782 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.157 Y96.631 E-0.07372 ; wipe and retract
G1 X106.983 Y96.777 E-0.05985 ; wipe and retract
;WIPE_END
G1 E-2.26643 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X104.276 Y98.925 ; move to first infill point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.484253
G1 F2400.000
G1 X103.807 Y99.300 E0.02204 ; infill
G1 X103.579 Y99.532 E0.01194 ; infill
;WIDTH:0.464861
G1 X103.215 Y99.849 E0.01695 ; infill
G1 X102.289 Y100.698 F10800.000 ; move to first infill point
;WIDTH:0.426904
G1 F2400.000
G1 X101.688 Y101.215 E0.02531 ; infill
G1 X101.004 Y102.079 F10800.000 ; move to first infill point
;WIDTH:0.136504
G1 F2400.000
G1 X100.704 Y102.428 E0.00358 ; infill
;WIDTH:0.259488
G1 X100.373 Y102.803 E0.00902 ; infill
;WIDTH:0.369038
G1 X99.749 Y103.431 E0.02399 ; infill
;WIDTH:0.350904
G1 X99.654 Y103.531 E0.00355 ; infill
;WIDTH:0.342682
G1 X99.464 Y103.756 E0.00732 ; infill
;WIDTH:0.293899
G1 X99.233 Y103.978 E0.00670 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.464 Y103.756 E-0.08473 ; wipe and retract
;WIPE_END
G1 E-2.31527 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X96.215 Y115.433 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.411 Y115.487 E0.00691 ; perimeter
G1 X97.064 Y115.541 E0.02215 ; perimeter
G1 X99.350 Y115.533 E0.07740 ; perimeter
G1 X102.174 Y115.555 E0.09558 ; perimeter
G1 X104.369 Y115.515 E0.07432 ; perimeter
G1 X106.126 Y115.421 E0.05955 ; perimeter
G1 X106.774 Y115.230 E0.02287 ; perimeter
G1 X108.328 Y115.243 E0.05261 ; perimeter
G1 X108.360 Y115.379 E0.00473 ; perimeter
G1 X108.948 Y115.523 E0.02051 ; perimeter
G1 X105.368 Y115.588 E0.12122 ; perimeter
G1 X98.897 Y115.593 E0.21903 ; perimeter
G1 X96.478 Y115.542 E0.08191 ; perimeter
G1 X96.266 Y115.463 E0.00762 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.411 Y115.487 E-0.03877 ; wipe and retract
G1 X97.064 Y115.541 E-0.17271 ; wipe and retract
G1 X99.350 Y115.533 E-0.60342 ; wipe and retract
G1 X102.174 Y115.555 E-0.74517 ; wipe and retract
G1 X104.369 Y115.515 E-0.57938 ; wipe and retract
G1 X104.901 Y115.487 E-0.14055 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X114.655 Y115.306 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.798 Y115.254 E0.00515 ; perimeter
G1 X114.972 Y115.049 E0.00911 ; perimeter
G1 X114.913 Y115.277 E0.00798 ; perimeter
G1 X114.715 Y115.302 E0.00676 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.798 Y115.254 E-0.02533 ; wipe and retract
G1 X114.972 Y115.049 E-0.07105 ; wipe and retract
G1 X114.913 Y115.277 E-0.06225 ; wipe and retract
G1 X114.715 Y115.302 E-0.05273 ; wipe and retract
;WIPE_END
G1 E-2.18864 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X115.264 Y109.901 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.169 Y109.827 E0.00410 ; perimeter
G1 X114.987 Y109.443 E0.01438 ; perimeter
G1 X114.815 Y109.424 E0.00586 ; perimeter
G1 X114.696 Y109.219 E0.00802 ; perimeter
G1 X114.938 Y109.099 E0.00914 ; perimeter
G1 X115.049 Y108.426 E0.02309 ; perimeter
G1 X115.124 Y108.269 E0.00588 ; perimeter
G1 X115.259 Y109.842 E0.05343 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.169 Y109.827 E-0.02415 ; wipe and retract
G1 X114.987 Y109.443 E-0.11209 ; wipe and retract
G1 X114.815 Y109.424 E-0.04568 ; wipe and retract
G1 X114.696 Y109.219 E-0.06255 ; wipe and retract
G1 X114.938 Y109.099 E-0.07123 ; wipe and retract
G1 X115.049 Y108.426 E-0.18001 ; wipe and retract
G1 X115.124 Y108.269 E-0.04588 ; wipe and retract
G1 X115.259 Y109.842 E-0.41652 ; wipe and retract
;WIPE_END
G1 E-1.44191 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X114.544 Y95.988 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.375 Y95.733 E0.01037 ; perimeter
G1 X114.256 Y95.726 E0.00403 ; perimeter
G1 X114.416 Y95.454 E0.01070 ; perimeter
G1 X114.488 Y95.196 E0.00906 ; perimeter
G1 X114.540 Y95.929 E0.02485 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.375 Y95.733 E-0.06752 ; wipe and retract
G1 X114.256 Y95.726 E-0.03143 ; wipe and retract
G1 X114.416 Y95.454 E-0.08343 ; wipe and retract
G1 X114.488 Y95.196 E-0.07065 ; wipe and retract
G1 X114.540 Y95.929 E-0.19370 ; wipe and retract
;WIPE_END
G1 E-1.95327 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X94.941 Y112.825 ; move to first perimeter point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.797 Y113.062 E0.00938 ; perimeter
G1 X94.694 Y112.790 E0.00985 ; perimeter
G1 X94.696 Y112.681 E0.00368 ; perimeter
G1 X94.889 Y112.795 E0.00756 ; perimeter
G1 X95.416 Y112.546 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X95.542 Y112.493 E0.00635 ; perimeter
G1 X95.865 Y112.486 E0.01497 ; perimeter
G1 X95.796 Y112.590 E0.00581 ; perimeter
G1 X95.447 Y112.919 E0.02217 ; perimeter
G1 X95.187 Y113.350 E0.02333 ; perimeter
G1 X95.215 Y113.593 E0.01133 ; perimeter
G1 X95.196 Y113.784 E0.00890 ; perimeter
G1 X95.585 Y114.486 E0.03717 ; perimeter
G1 X95.779 Y114.645 E0.01163 ; perimeter
G1 X95.994 Y114.874 E0.01455 ; perimeter
G1 X96.495 Y115.010 E0.02407 ; perimeter
G1 X97.083 Y115.059 E0.02731 ; perimeter
G1 X99.351 Y115.051 E0.10508 ; perimeter
G1 X102.172 Y115.073 E0.13064 ; perimeter
G1 X104.352 Y115.033 E0.10101 ; perimeter
G1 X106.044 Y114.943 E0.07848 ; perimeter
G1 X106.706 Y114.747 E0.03200 ; perimeter
G1 X108.291 Y114.760 E0.07340 ; perimeter
G1 X108.517 Y114.628 E0.01212 ; perimeter
G1 X108.662 Y114.639 E0.00677 ; perimeter
G1 X108.703 Y114.722 E0.00428 ; perimeter
G1 X108.761 Y114.977 E0.01212 ; perimeter
G1 X109.143 Y115.065 E0.01812 ; perimeter
G1 X109.236 Y115.136 E0.00546 ; perimeter
G1 X109.493 Y115.177 E0.01201 ; perimeter
G1 X111.462 Y115.152 E0.09123 ; perimeter
G1 X113.368 Y115.082 E0.08836 ; perimeter
G1 X113.994 Y115.032 E0.02906 ; perimeter
G1 X114.513 Y114.845 E0.02558 ; perimeter
G1 X114.656 Y114.676 E0.01023 ; perimeter
G1 X114.779 Y114.387 E0.01456 ; perimeter
G1 X114.923 Y113.180 E0.05629 ; perimeter
G1 X115.030 Y111.960 E0.05674 ; perimeter
G1 X115.032 Y111.185 E0.03588 ; perimeter
G1 X115.012 Y110.794 E0.01813 ; perimeter
G1 X114.889 Y110.220 E0.02719 ; perimeter
G1 X114.782 Y110.136 E0.00631 ; perimeter
G1 X114.667 Y109.893 E0.01245 ; perimeter
G1 X114.352 Y109.859 E0.01467 ; perimeter
G1 X114.235 Y109.736 E0.00790 ; perimeter
G1 X114.342 Y109.569 E0.00918 ; perimeter
G1 X114.087 Y109.129 E0.02355 ; perimeter
G1 X114.251 Y109.030 E0.00885 ; perimeter
G1 X114.300 Y108.875 E0.00756 ; perimeter
G1 X114.503 Y108.776 E0.01046 ; perimeter
G1 X114.584 Y108.280 E0.02324 ; perimeter
G1 X114.695 Y108.047 E0.01199 ; perimeter
G1 X114.872 Y106.220 E0.08501 ; perimeter
G1 X114.826 Y102.617 E0.16689 ; perimeter
G1 X114.859 Y101.521 E0.05080 ; perimeter
G1 X114.876 Y99.944 E0.07304 ; perimeter
G1 X114.804 Y98.901 E0.04845 ; perimeter
G1 X114.663 Y97.955 E0.04428 ; perimeter
G1 X114.419 Y96.671 E0.06056 ; perimeter
G1 X114.107 Y96.201 E0.02615 ; perimeter
G1 X113.708 Y96.178 E0.01851 ; perimeter
G1 X113.664 Y96.144 E0.00258 ; perimeter
G1 X113.199 Y96.177 E0.02156 ; perimeter
G1 X113.089 Y96.152 E0.00523 ; perimeter
G1 X113.613 Y95.699 E0.03209 ; perimeter
G1 X113.885 Y95.417 E0.01813 ; perimeter
G1 X113.968 Y95.269 E0.00786 ; perimeter
G1 X114.078 Y94.873 E0.01902 ; perimeter
G1 X113.751 Y94.614 E0.01931 ; perimeter
G1 X113.369 Y94.562 E0.01787 ; perimeter
G1 X112.737 Y94.695 E0.02992 ; perimeter
G1 X112.326 Y94.853 E0.02041 ; perimeter
G1 X112.033 Y94.829 E0.01362 ; perimeter
G1 X111.858 Y94.874 E0.00835 ; perimeter
G1 X111.363 Y94.879 E0.02294 ; perimeter
G1 X111.233 Y94.929 E0.00646 ; perimeter
G1 X110.958 Y94.973 E0.01290 ; perimeter
G1 X110.643 Y95.237 E0.01903 ; perimeter
G1 X110.377 Y95.511 E0.01771 ; perimeter
G1 X110.020 Y95.678 E0.01825 ; perimeter
G1 X109.766 Y95.693 E0.01176 ; perimeter
G1 X109.520 Y95.767 E0.01190 ; perimeter
G1 X109.363 Y95.720 E0.00762 ; perimeter
G1 X109.310 Y95.645 E0.00426 ; perimeter
G1 X109.301 Y95.552 E0.00433 ; perimeter
G1 X109.412 Y95.279 E0.01363 ; perimeter
G1 X109.512 Y95.116 E0.00885 ; perimeter
G1 X109.870 Y94.762 E0.02333 ; perimeter
G1 X110.312 Y94.463 E0.02472 ; perimeter
G1 X111.181 Y94.140 E0.04293 ; perimeter
G1 X111.728 Y94.055 E0.02564 ; perimeter
G1 X112.235 Y94.025 E0.02352 ; perimeter
G1 X112.569 Y94.044 E0.01552 ; perimeter
G1 X112.836 Y94.023 E0.01238 ; perimeter
G1 X113.136 Y94.050 E0.01398 ; perimeter
G1 X113.764 Y93.981 E0.02927 ; perimeter
G1 X114.147 Y93.964 E0.01775 ; perimeter
G1 X114.454 Y94.013 E0.01442 ; perimeter
G1 X114.603 Y94.093 E0.00783 ; perimeter
G1 X114.759 Y94.329 E0.01311 ; perimeter
G1 X114.831 Y94.482 E0.00781 ; perimeter
G1 X114.930 Y94.851 E0.01769 ; perimeter
G1 X114.966 Y95.113 E0.01225 ; perimeter
G1 X115.029 Y96.010 E0.04164 ; perimeter
G1 X115.220 Y96.802 E0.03778 ; perimeter
G1 X115.490 Y98.478 E0.07862 ; perimeter
G1 X115.553 Y98.665 E0.00915 ; perimeter
G1 X115.649 Y99.330 E0.03109 ; perimeter
G1 X115.671 Y100.262 E0.04320 ; perimeter
G1 X115.641 Y100.500 E0.01112 ; perimeter
G1 X115.576 Y103.206 E0.12536 ; perimeter
G1 X115.487 Y105.355 E0.09966 ; perimeter
G1 X115.445 Y105.763 E0.01898 ; perimeter
G1 X115.465 Y106.824 E0.04916 ; perimeter
G1 X115.530 Y107.365 E0.02522 ; perimeter
G1 X115.746 Y109.879 E0.11691 ; perimeter
G1 X115.810 Y110.986 E0.05137 ; perimeter
G1 X115.826 Y111.829 E0.03905 ; perimeter
G1 X115.464 Y115.068 E0.15096 ; perimeter
G1 X115.356 Y115.490 E0.02014 ; perimeter
G1 X115.258 Y115.647 E0.00860 ; perimeter
G1 X115.155 Y115.719 E0.00583 ; perimeter
G1 X114.887 Y115.775 E0.01268 ; perimeter
G1 X114.303 Y115.810 E0.02713 ; perimeter
G1 X108.894 Y116.007 E0.25068 ; perimeter
G1 X105.372 Y116.070 E0.16318 ; perimeter
G1 X98.893 Y116.075 E0.30014 ; perimeter
G1 X96.412 Y116.021 E0.11494 ; perimeter
G1 X96.114 Y115.932 E0.01439 ; perimeter
G1 X95.905 Y115.811 E0.01122 ; perimeter
G1 X95.783 Y115.678 E0.00835 ; perimeter
G1 X95.684 Y115.506 E0.00919 ; perimeter
G1 X95.668 Y115.426 E0.00379 ; perimeter
G1 X95.523 Y115.142 E0.01474 ; perimeter
G1 X95.526 Y115.068 E0.00343 ; perimeter
G1 X94.962 Y114.125 E0.05092 ; perimeter
G1 X94.864 Y114.043 E0.00590 ; perimeter
G1 X94.570 Y113.564 E0.02604 ; perimeter
G1 X94.430 Y113.409 E0.00968 ; perimeter
G1 X94.311 Y113.164 E0.01262 ; perimeter
G1 X94.211 Y112.863 E0.01469 ; perimeter
G1 X94.220 Y112.369 E0.02290 ; perimeter
G1 X94.323 Y112.088 E0.01387 ; perimeter
G1 X94.432 Y111.913 E0.00955 ; perimeter
G1 X94.523 Y111.826 E0.00583 ; perimeter
G1 X94.626 Y111.826 E0.00475 ; perimeter
G1 X94.676 Y111.953 E0.00636 ; perimeter
G1 X94.967 Y112.281 E0.02027 ; perimeter
G1 X95.364 Y112.515 E0.02137 ; perimeter
G1 X95.489 Y112.662 F10800.000 ; move inwards before travel
G1 X94.699 Y112.376 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.14176
G1 F2400.000
G1 X94.526 Y112.234 E0.00184 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.699 Y112.376 E-0.05896 ; wipe and retract
;WIPE_END
G1 E-2.34104 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X95.769 Y115.029 ; move to first infill point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.132668
G1 F2400.000
G1 X95.832 Y115.119 E0.00082 ; infill
;WIDTH:0.148156
G1 X96.007 Y115.304 E0.00223 ; infill
G1 X95.940 Y115.431 F10800.000 ; move to first infill point
;WIDTH:0.146174
G1 F2400.000
G1 X95.950 Y115.111 E0.00274 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.940 Y115.431 E-0.08432 ; wipe and retract
;WIPE_END
G1 E-2.31568 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X110.050 Y115.724 ; move to first infill point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.222634
G1 F2400.000
G1 X109.212 Y115.408 E0.01338 ; infill
G1 X109.426 Y115.582 F10800.000 ; move to first infill point
;WIDTH:0.323007
G1 F2400.000
G1 X113.391 Y115.462 E0.09238 ; infill
;WIDTH:0.340685
G1 X113.905 Y115.435 E0.01275 ; infill
;WIDTH:0.360699
G1 X114.103 Y115.417 E0.00525 ; infill
;WIDTH:0.369805
G1 X114.242 Y115.391 E0.00385 ; infill
G1 X114.457 Y115.559 E0.00743 ; infill
G1 X115.060 Y114.823 F10800.000 ; move to first infill point
;WIDTH:0.307896
G1 F2400.000
G1 X115.151 Y114.466 E0.00812 ; infill
G1 X115.295 Y113.216 E0.02771 ; infill
;WIDTH:0.338731
G1 X115.418 Y111.971 E0.03078 ; infill
;WIDTH:0.348191
G1 X115.423 Y111.180 E0.02008 ; infill
G1 X115.401 Y110.731 E0.01141 ; infill
;WIDTH:0.382842
G1 X115.338 Y110.265 E0.01328 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.401 Y110.731 E-0.12400 ; wipe and retract
;WIPE_END
G1 E-2.27600 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 X115.142 Y108.027 ; move to first infill point
G1 Z1.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.412348
G1 F2400.000
G1 X115.144 Y107.716 E0.00957 ; infill
;WIDTH:0.37276
G1 X115.145 Y107.404 E0.00855 ; infill
;WIDTH:0.333172
G1 X115.143 Y107.220 E0.00445 ; infill
;WIDTH:0.293452
G1 X115.141 Y107.035 E0.00384 ; infill
;WIDTH:0.253733
G1 X115.139 Y106.851 E0.00323 ; infill
;WIDTH:0.214012
G1 X115.151 Y106.539 E0.00445 ; infill
;WIDTH:0.177662
G1 X115.162 Y106.235 E0.00341 ; infill
;WIDTH:0.142737
G1 X115.155 Y105.754 E0.00399 ; infill
G1 X115.184 Y104.619 E0.00942 ; infill
;WIDTH:0.265433
G1 X115.257 Y100.464 E0.07690 ; infill
;WIDTH:0.358987
G1 X115.270 Y99.939 E0.01379 ; infill
;WIDTH:0.34857
G1 X115.244 Y99.364 E0.01464 ; infill
G1 X115.190 Y98.865 E0.01275 ; infill
;WIDTH:0.335983
G1 X115.132 Y98.578 E0.00713 ; infill
;WIDTH:0.303373
G1 X115.025 Y97.897 E0.01494 ; infill
;WIDTH:0.29372
G1 X114.776 Y96.554 E0.02848 ; infill
G1 X114.633 Y96.213 E0.00771 ; infill
G1 X114.324 Y94.937 F10800.000 ; move to first infill point
;WIDTH:0.353684
G1 F2400.000
G1 X114.508 Y94.800 E0.00593 ; infill
G1 X114.487 Y94.709 E0.00240 ; infill
;WIDTH:0.375557
G1 X114.456 Y94.654 E0.00175 ; infill
;WIDTH:0.392721
G1 X114.155 Y94.207 E0.01568 ; infill
G1 X114.534 Y94.426 F10800.000 ; move to first infill point
;WIDTH:0.231339
G1 F2400.000
G1 X113.861 Y94.302 E0.01073 ; infill
;WIDTH:0.209536
G1 X113.789 Y94.298 E0.00099 ; infill
;WIDTH:0.19664
G1 X113.570 Y94.296 E0.00279 ; infill
;WIDTH:0.14678
G1 X113.352 Y94.293 E0.00189 ; infill
G1 X112.665 Y94.465 F10800.000 ; move to first infill point
;WIDTH:0.38027
G1 F2400.000
G1 X112.024 Y94.432 E0.01798 ; infill
;WIDTH:0.351314
G1 X111.315 Y94.502 E0.01828 ; infill
;WIDTH:0.317189
G1 X110.986 Y94.601 E0.00785 ; infill
;WIDTH:0.287728
G1 X110.837 Y94.640 E0.00313 ; infill
;WIDTH:0.261435
G1 X110.594 Y94.772 E0.00503 ; infill
;WIDTH:0.37349
G1 X110.367 Y94.927 E0.00756 ; infill
G1 X110.115 Y95.144 E0.00912 ; infill
G1 X109.629 Y95.482 E0.01628 ; infill
;LAYER_CHANGE
;Z:2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.115 Y95.144 E-0.15626 ; wipe and retract
G1 X110.367 Y94.927 E-0.08760 ; wipe and retract
G1 X110.594 Y94.772 E-0.07257 ; wipe and retract
;WIPE_END
G1 E-2.08357 F2400.000 ; retract
G1 Z1.875 F10800.000 ; lift Z
G1 Z2.000 ; move to next layer (9)
;AFTER_LAYER_CHANGE
;2
G1 Z2.075 ; lift Z
G1 X97.272 Y108.486 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.282 Y108.565 E0.00368 ; perimeter
G1 X97.101 Y108.755 E0.01215 ; perimeter
G1 X96.827 Y108.860 E0.01363 ; perimeter
G1 X96.646 Y108.973 E0.00987 ; perimeter
G1 X96.109 Y109.159 E0.02633 ; perimeter
G1 X95.620 Y109.299 E0.02353 ; perimeter
G1 X95.181 Y109.776 E0.03002 ; perimeter
G1 X95.028 Y110.218 E0.02170 ; perimeter
G1 X94.730 Y111.299 E0.05192 ; perimeter
G1 X94.763 Y111.733 E0.02017 ; perimeter
G1 X94.822 Y111.956 E0.01068 ; perimeter
G1 X94.878 Y112.019 E0.00390 ; perimeter
G1 X94.962 Y112.285 E0.01292 ; perimeter
G1 X95.091 Y112.357 E0.00684 ; perimeter
G1 X95.106 Y112.435 E0.00369 ; perimeter
G1 X95.189 Y112.540 E0.00622 ; perimeter
G1 X95.132 Y112.813 E0.01292 ; perimeter
G1 X95.148 Y112.840 E0.00145 ; perimeter
G1 X94.857 Y113.382 E0.02850 ; perimeter
G1 X94.800 Y113.407 E0.00286 ; perimeter
G1 X94.553 Y113.317 E0.01219 ; perimeter
G1 X94.398 Y113.155 E0.01038 ; perimeter
G1 X94.293 Y112.960 E0.01026 ; perimeter
G1 X94.175 Y112.609 E0.01715 ; perimeter
G1 X94.176 Y112.156 E0.02099 ; perimeter
G1 X94.207 Y111.982 E0.00822 ; perimeter
G1 X94.257 Y111.889 E0.00488 ; perimeter
G1 X94.459 Y111.193 E0.03356 ; perimeter
G1 X94.530 Y110.692 E0.02345 ; perimeter
G1 X94.556 Y110.247 E0.02065 ; perimeter
G1 X94.722 Y109.164 E0.05074 ; perimeter
G1 X94.766 Y109.004 E0.00771 ; perimeter
G1 X94.917 Y108.701 E0.01564 ; perimeter
G1 X95.169 Y108.497 E0.01506 ; perimeter
G1 X95.392 Y108.382 E0.01163 ; perimeter
G1 X95.641 Y108.286 E0.01235 ; perimeter
G1 X95.922 Y108.295 E0.01301 ; perimeter
G1 X96.162 Y108.362 E0.01154 ; perimeter
G1 X96.463 Y108.336 E0.01402 ; perimeter
G1 X96.836 Y108.387 E0.01743 ; perimeter
G1 X97.014 Y108.389 E0.00827 ; perimeter
G1 X97.216 Y108.465 E0.00999 ; perimeter
G1 X97.233 Y108.555 F10800.000 ; move inwards before travel
G1 X95.851 Y108.754 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.522486
G1 F2400.000
G1 X95.723 Y108.769 E0.00515 ; infill
G1 X95.587 Y108.815 E0.00570 ; infill
;WIDTH:0.509567
G1 X95.429 Y108.878 E0.00660 ; infill
;WIDTH:0.476124
G1 X95.290 Y108.980 E0.00622 ; infill
G1 X95.100 Y109.257 E0.01211 ; infill
;WIDTH:0.448045
G1 X94.909 Y109.534 E0.01132 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.100 Y109.257 E-0.08870 ; wipe and retract
;WIPE_END
G1 E-2.31130 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 X97.844 Y105.595 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X97.895 Y105.516 E0.00318 ; perimeter
G1 X98.153 Y105.290 E0.01162 ; perimeter
G1 X98.240 Y105.240 E0.00338 ; perimeter
G1 X98.355 Y105.610 E0.01313 ; perimeter
G1 X98.163 Y105.570 E0.00666 ; perimeter
G1 X97.903 Y105.590 E0.00881 ; perimeter
G1 X98.738 Y105.219 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.938 Y105.857 E0.03098 ; perimeter
G1 X98.966 Y105.895 E0.00215 ; perimeter
G1 X98.982 Y106.028 E0.00623 ; perimeter
G1 X98.920 Y106.084 E0.00385 ; perimeter
G1 X98.755 Y106.096 E0.00767 ; perimeter
G1 X98.664 Y106.124 E0.00441 ; perimeter
G1 X98.347 Y106.100 E0.01475 ; perimeter
G1 X98.132 Y106.056 E0.01016 ; perimeter
G1 X97.758 Y106.085 E0.01740 ; perimeter
G1 X97.569 Y106.142 E0.00914 ; perimeter
G1 X97.287 Y106.106 E0.01316 ; perimeter
G1 X97.246 Y106.030 E0.00400 ; perimeter
G1 X97.237 Y105.838 E0.00888 ; perimeter
G1 X97.265 Y105.662 E0.00824 ; perimeter
G1 X97.468 Y105.280 E0.02009 ; perimeter
G1 X97.542 Y105.184 E0.00557 ; perimeter
G1 X97.870 Y104.897 E0.02020 ; perimeter
G1 X97.995 Y104.824 E0.00669 ; perimeter
G1 X98.612 Y104.365 E0.03562 ; perimeter
G1 X98.691 Y104.158 E0.01027 ; perimeter
G1 X98.881 Y103.917 E0.01423 ; perimeter
G1 X99.101 Y103.571 E0.01897 ; perimeter
G1 X99.757 Y102.846 E0.04529 ; perimeter
G1 X100.613 Y102.076 E0.05332 ; perimeter
G1 X100.821 Y101.865 E0.01373 ; perimeter
G1 X101.290 Y101.341 E0.03257 ; perimeter
G1 X101.446 Y101.131 E0.01215 ; perimeter
G1 X101.792 Y100.565 E0.03072 ; perimeter
G1 X102.305 Y100.035 E0.03416 ; perimeter
G1 X104.086 Y98.480 E0.10952 ; perimeter
G1 X104.382 Y98.258 E0.01715 ; perimeter
G1 X104.928 Y98.008 E0.02780 ; perimeter
G1 X105.188 Y97.730 E0.01765 ; perimeter
G1 X105.312 Y97.557 E0.00982 ; perimeter
G1 X105.626 Y97.310 E0.01851 ; perimeter
G1 X105.818 Y97.228 E0.00968 ; perimeter
G1 X106.332 Y96.940 E0.02730 ; perimeter
G1 X106.771 Y96.390 E0.03259 ; perimeter
G1 X107.001 Y96.238 E0.01278 ; perimeter
G1 X107.163 Y96.190 E0.00778 ; perimeter
G1 X107.380 Y96.198 E0.01006 ; perimeter
G1 X107.550 Y96.261 E0.00840 ; perimeter
G1 X107.652 Y96.357 E0.00652 ; perimeter
G1 X107.717 Y96.638 E0.01335 ; perimeter
G1 X107.635 Y96.852 E0.01064 ; perimeter
G1 X107.571 Y96.932 E0.00475 ; perimeter
G1 X106.960 Y97.309 E0.03325 ; perimeter
G1 X106.286 Y97.951 E0.04312 ; perimeter
G1 X105.935 Y98.168 E0.01912 ; perimeter
G1 X105.394 Y98.439 E0.02804 ; perimeter
G1 X105.197 Y98.649 E0.01332 ; perimeter
G1 X105.009 Y98.957 E0.01674 ; perimeter
G1 X104.663 Y99.222 E0.02016 ; perimeter
G1 X104.277 Y99.383 E0.01937 ; perimeter
G1 X103.668 Y99.865 E0.03601 ; perimeter
G1 X103.103 Y100.389 E0.03565 ; perimeter
G1 X102.922 Y100.622 E0.01370 ; perimeter
G1 X102.777 Y100.761 E0.00930 ; perimeter
G1 X102.587 Y100.987 E0.01367 ; perimeter
G1 X102.363 Y101.169 E0.01338 ; perimeter
G1 X101.819 Y101.545 E0.03060 ; perimeter
G1 X101.616 Y101.744 E0.01320 ; perimeter
G1 X101.171 Y102.340 E0.03446 ; perimeter
G1 X100.694 Y103.077 E0.04065 ; perimeter
G1 X100.363 Y103.454 E0.02328 ; perimeter
G1 X100.254 Y103.523 E0.00597 ; perimeter
G1 X99.903 Y103.835 E0.02171 ; perimeter
G1 X99.743 Y103.991 E0.01038 ; perimeter
G1 X99.538 Y104.238 E0.01486 ; perimeter
G1 X99.227 Y104.446 E0.01734 ; perimeter
G1 X98.921 Y104.729 E0.01932 ; perimeter
G1 X98.810 Y104.956 E0.01168 ; perimeter
G1 X98.828 Y105.016 E0.00291 ; perimeter
G1 X98.762 Y105.164 E0.00751 ; perimeter
G1 X98.417 Y105.457 F10800.000 ; move inwards before travel
G1 X99.070 Y104.263 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318397
G1 F2400.000
G1 X99.469 Y103.728 E0.01529 ; infill
;WIDTH:0.334804
G1 X99.642 Y103.549 E0.00604 ; infill
;WIDTH:0.365757
G1 X100.082 Y103.127 E0.01638 ; infill
G1 X100.485 Y102.701 E0.01574 ; infill
;WIDTH:0.227913
G1 X100.825 Y102.302 E0.00805 ; infill
;WIDTH:0.126667
G1 X101.260 Y101.775 E0.00476 ; infill
G1 X101.600 Y101.422 F10800.000 ; move to first infill point
;WIDTH:0.399812
G1 F2400.000
G1 X102.130 Y100.818 E0.02383 ; infill
;WIDTH:0.43082
G1 X102.461 Y100.478 E0.01531 ; infill
;WIDTH:0.322954
G1 X102.820 Y100.112 E0.01194 ; infill
G1 X103.424 Y99.572 E0.01886 ; infill
;WIDTH:0.357689
G1 X104.056 Y99.049 E0.02148 ; infill
;WIDTH:0.365637
G1 X104.092 Y99.024 E0.00118 ; infill
;WIDTH:0.412152
G1 X104.217 Y98.947 E0.00451 ; infill
;WIDTH:0.458667
G1 X104.342 Y98.869 E0.00508 ; infill
;WIDTH:0.472313
G1 X104.370 Y98.850 E0.00123 ; infill
;WIDTH:0.483319
G1 X104.695 Y98.616 E0.01465 ; infill
G1 X105.039 Y98.222 F10800.000 ; move to first infill point
;WIDTH:0.382405
G1 F2400.000
G1 X105.855 Y97.695 E0.02739 ; infill
G1 X106.021 Y97.608 E0.00530 ; infill
G1 X106.283 Y97.415 E0.00918 ; infill
;WIDTH:0.260412
G1 X106.575 Y97.194 E0.00662 ; infill
;WIDTH:0.294207
G1 X106.745 Y97.011 E0.00523 ; infill
;WIDTH:0.34334
G1 X106.854 Y96.913 E0.00365 ; infill
;WIDTH:0.392473
G1 X106.963 Y96.816 E0.00425 ; infill
;WIDTH:0.445527
G1 X107.196 Y96.640 E0.00979 ; infill
G1 X107.444 Y96.524 E0.00916 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.196 Y96.640 E-0.07217 ; wipe and retract
G1 X106.963 Y96.816 E-0.07716 ; wipe and retract
;WIPE_END
G1 E-2.25067 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 X114.129 Y94.347 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.332 Y94.349 E0.00689 ; perimeter
G1 X114.396 Y94.559 E0.00742 ; perimeter
G1 X114.176 Y94.384 E0.00952 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.332 Y94.349 E-0.04231 ; wipe and retract
G1 X114.396 Y94.559 E-0.05781 ; wipe and retract
G1 X114.176 Y94.384 E-0.07422 ; wipe and retract
;WIPE_END
G1 E-2.22565 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 X115.025 Y114.906 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.011 Y115.071 E0.00561 ; perimeter
G1 X114.950 Y115.297 E0.00792 ; perimeter
G1 X114.553 Y115.329 E0.01346 ; perimeter
G1 X114.836 Y115.212 E0.01036 ; perimeter
G1 X114.994 Y114.957 E0.01015 ; perimeter
G1 X114.584 Y114.703 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.686 Y114.538 E0.00898 ; perimeter
G1 X114.803 Y114.143 E0.01911 ; perimeter
G1 X114.944 Y112.985 E0.05400 ; perimeter
G1 X115.041 Y111.946 E0.04834 ; perimeter
G1 X115.038 Y110.785 E0.05380 ; perimeter
G1 X115.002 Y110.615 E0.00804 ; perimeter
G1 X114.994 Y110.292 E0.01499 ; perimeter
G1 X114.874 Y109.730 E0.02661 ; perimeter
G1 X114.874 Y109.010 E0.03335 ; perimeter
G1 X114.927 Y108.661 E0.01632 ; perimeter
G1 X114.967 Y107.772 E0.04123 ; perimeter
G1 X115.065 Y106.715 E0.04917 ; perimeter
G1 X115.027 Y105.070 E0.07624 ; perimeter
G1 X114.961 Y104.176 E0.04150 ; perimeter
G1 X114.939 Y103.502 E0.03123 ; perimeter
G1 X114.920 Y102.544 E0.04438 ; perimeter
G1 X114.940 Y101.998 E0.02532 ; perimeter
G1 X114.912 Y101.220 E0.03604 ; perimeter
G1 X114.918 Y100.099 E0.05194 ; perimeter
G1 X114.803 Y98.822 E0.05940 ; perimeter
G1 X114.681 Y97.986 E0.03914 ; perimeter
G1 X114.565 Y96.972 E0.04730 ; perimeter
G1 X114.523 Y96.770 E0.00953 ; perimeter
G1 X114.529 Y96.555 E0.01000 ; perimeter
G1 X114.469 Y96.348 E0.00996 ; perimeter
G1 X114.282 Y96.121 E0.01366 ; perimeter
G1 X113.955 Y95.860 E0.01935 ; perimeter
G1 X113.886 Y95.779 E0.00495 ; perimeter
G1 X114.065 Y95.332 E0.02228 ; perimeter
G1 X114.022 Y95.159 E0.00826 ; perimeter
G1 X114.100 Y94.940 E0.01079 ; perimeter
G1 X113.818 Y94.716 E0.01670 ; perimeter
G1 X113.394 Y94.640 E0.01995 ; perimeter
G1 X112.566 Y94.906 E0.04027 ; perimeter
G1 X112.395 Y94.902 E0.00796 ; perimeter
G1 X112.129 Y94.861 E0.01246 ; perimeter
G1 X111.731 Y94.862 E0.01844 ; perimeter
G1 X111.484 Y94.792 E0.01188 ; perimeter
G1 X110.924 Y94.864 E0.02613 ; perimeter
G1 X110.487 Y95.267 E0.02756 ; perimeter
G1 X110.254 Y95.555 E0.01716 ; perimeter
G1 X109.922 Y95.705 E0.01685 ; perimeter
G1 X109.844 Y95.769 E0.00470 ; perimeter
G1 X109.391 Y95.911 E0.02195 ; perimeter
G1 X109.225 Y95.889 E0.00776 ; perimeter
G1 X109.150 Y95.758 E0.00700 ; perimeter
G1 X109.155 Y95.590 E0.00778 ; perimeter
G1 X109.375 Y95.221 E0.01989 ; perimeter
G1 X109.686 Y94.918 E0.02011 ; perimeter
G1 X110.125 Y94.639 E0.02411 ; perimeter
G1 X110.513 Y94.499 E0.01911 ; perimeter
G1 X110.694 Y94.484 E0.00839 ; perimeter
G1 X111.169 Y94.259 E0.02435 ; perimeter
G1 X111.525 Y94.133 E0.01751 ; perimeter
G1 X112.156 Y94.021 E0.02969 ; perimeter
G1 X114.328 Y93.853 E0.10090 ; perimeter
G1 X114.492 Y93.875 E0.00767 ; perimeter
G1 X114.698 Y94.015 E0.01150 ; perimeter
G1 X114.789 Y94.178 E0.00868 ; perimeter
G1 X114.876 Y94.484 E0.01473 ; perimeter
G1 X114.931 Y94.940 E0.02129 ; perimeter
G1 X114.927 Y95.457 E0.02391 ; perimeter
G1 X114.955 Y96.098 E0.02974 ; perimeter
G1 X115.203 Y97.097 E0.04769 ; perimeter
G1 X115.483 Y98.458 E0.06434 ; perimeter
G1 X115.704 Y99.379 E0.04389 ; perimeter
G1 X115.712 Y99.506 E0.00592 ; perimeter
G1 X115.720 Y99.720 E0.00992 ; perimeter
G1 X115.673 Y100.107 E0.01805 ; perimeter
G1 X115.649 Y100.153 E0.00241 ; perimeter
G1 X115.584 Y100.833 E0.03164 ; perimeter
G1 X115.574 Y101.616 E0.03625 ; perimeter
G1 X115.420 Y104.189 E0.11942 ; perimeter
G1 X115.266 Y105.825 E0.07612 ; perimeter
G1 X115.310 Y106.935 E0.05145 ; perimeter
G1 X115.438 Y107.769 E0.03909 ; perimeter
G1 X115.542 Y108.671 E0.04205 ; perimeter
G1 X115.660 Y109.978 E0.06079 ; perimeter
G1 X115.730 Y110.414 E0.02044 ; perimeter
G1 X115.757 Y110.733 E0.01482 ; perimeter
G1 X115.827 Y111.079 E0.01638 ; perimeter
G1 X115.840 Y111.795 E0.03314 ; perimeter
G1 X115.553 Y114.400 E0.12142 ; perimeter
G1 X115.488 Y115.155 E0.03512 ; perimeter
G1 X115.390 Y115.516 E0.01730 ; perimeter
G1 X115.283 Y115.683 E0.00918 ; perimeter
G1 X115.142 Y115.765 E0.00758 ; perimeter
G1 X114.273 Y115.836 E0.04038 ; perimeter
G1 X113.819 Y115.828 E0.02102 ; perimeter
G1 X111.508 Y115.884 E0.10709 ; perimeter
G1 X109.985 Y115.897 E0.07052 ; perimeter
G1 X107.708 Y116.002 E0.10561 ; perimeter
G1 X103.995 Y116.111 E0.17208 ; perimeter
G1 X96.533 Y116.061 E0.34565 ; perimeter
G1 X96.429 Y116.056 E0.00480 ; perimeter
G1 X96.106 Y115.982 E0.01537 ; perimeter
G1 X95.958 Y115.891 E0.00803 ; perimeter
G1 X95.816 Y115.728 E0.01002 ; perimeter
G1 X95.715 Y115.522 E0.01061 ; perimeter
G1 X95.771 Y115.047 E0.02216 ; perimeter
G1 X95.935 Y115.096 E0.00794 ; perimeter
G1 X96.154 Y115.068 E0.01025 ; perimeter
G1 X96.261 Y115.098 E0.00512 ; perimeter
G1 X97.126 Y115.167 E0.04020 ; perimeter
G1 X102.482 Y115.182 E0.24810 ; perimeter
G1 X103.393 Y115.155 E0.04223 ; perimeter
G1 X105.223 Y115.152 E0.08475 ; perimeter
G1 X107.179 Y115.115 E0.09063 ; perimeter
G1 X107.701 Y115.125 E0.02420 ; perimeter
G1 X108.165 Y115.093 E0.02155 ; perimeter
G1 X108.625 Y115.115 E0.02131 ; perimeter
G1 X109.121 Y115.241 E0.02370 ; perimeter
G1 X109.550 Y115.243 E0.01988 ; perimeter
G1 X111.029 Y115.195 E0.06854 ; perimeter
G1 X113.965 Y115.051 E0.13620 ; perimeter
G1 X114.508 Y114.826 E0.02720 ; perimeter
G1 X114.552 Y114.754 E0.00392 ; perimeter
G1 X114.774 Y114.741 F10800.000 ; move inwards before travel
G1 X115.096 Y114.675 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.389407
G1 F2400.000
G1 X115.155 Y114.363 E0.00916 ; infill
;WIDTH:0.360628
G1 X115.181 Y114.233 E0.00349 ; infill
;WIDTH:0.337103
G1 X115.322 Y113.028 E0.02969 ; infill
;WIDTH:0.321187
G1 X115.440 Y111.776 E0.02909 ; infill
G1 X115.433 Y111.122 E0.01514 ; infill
G1 X115.400 Y110.790 E0.00772 ; infill
;WIDTH:0.283562
G1 X115.347 Y110.261 E0.01065 ; infill
;WIDTH:0.268785
G1 X115.253 Y109.690 E0.01087 ; infill
G1 X115.224 Y109.036 E0.01229 ; infill
;WIDTH:0.259852
G1 X115.229 Y108.869 E0.00300 ; infill
;WIDTH:0.219914
G1 X115.234 Y108.703 E0.00245 ; infill
;WIDTH:0.179977
G1 X115.225 Y108.425 E0.00317 ; infill
;WIDTH:0.136616
G1 X115.216 Y108.162 E0.00205 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.225 Y108.425 E-0.06939 ; wipe and retract
;WIPE_END
G1 E-2.33061 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 X115.203 Y103.343 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.127744
G1 F2400.000
G1 X115.250 Y101.604 E0.01227 ; infill
;WIDTH:0.227613
G1 X115.249 Y100.819 E0.01206 ; infill
G1 X115.291 Y100.019 E0.01230 ; infill
;WIDTH:0.335046
G1 X115.302 Y99.703 E0.00769 ; infill
G1 X115.284 Y99.442 E0.00635 ; infill
G1 X115.176 Y98.782 E0.01625 ; infill
;WIDTH:0.309585
G1 X115.129 Y98.538 E0.00550 ; infill
;WIDTH:0.28716
G1 X115.024 Y97.941 E0.01231 ; infill
;WIDTH:0.252215
G1 X114.962 Y97.554 E0.00683 ; infill
;WIDTH:0.216956
G1 X114.900 Y97.166 E0.00568 ; infill
;WIDTH:0.181699
G1 X114.857 Y96.927 E0.00280 ; infill
;WIDTH:0.150186
G1 X114.794 Y96.548 E0.00343 ; infill
G1 X114.729 Y96.235 F10800.000 ; move to first infill point
;WIDTH:0.350743
G1 F2400.000
G1 X114.297 Y95.266 E0.02717 ; infill
G1 X114.548 Y94.748 F10800.000 ; move to first infill point
;WIDTH:0.374456
G1 F2400.000
G1 X114.485 Y95.184 E0.01215 ; infill
G1 X114.496 Y95.417 E0.00643 ; infill
G1 X114.405 Y95.911 E0.01384 ; infill
G1 X113.670 Y94.290 F10800.000 ; move to first infill point
;WIDTH:0.291701
G1 F2400.000
G1 X113.400 Y94.278 E0.00559 ; infill
;WIDTH:0.276996
G1 X112.993 Y94.348 E0.00803 ; infill
;WIDTH:0.38847
G1 X112.487 Y94.450 E0.01483 ; infill
G1 X112.174 Y94.444 E0.00900 ; infill
G1 X111.649 Y94.490 E0.01516 ; infill
;WIDTH:0.361098
G1 X111.151 Y94.534 E0.01322 ; infill
G1 X110.584 Y94.735 F10800.000 ; move to first infill point
;WIDTH:0.294449
G1 F2400.000
G1 X110.102 Y95.119 E0.01288 ; infill
;WIDTH:0.393717
G1 X109.943 Y95.243 E0.00589 ; infill
;WIDTH:0.385806
G1 X109.842 Y95.312 E0.00349 ; infill
;WIDTH:0.343368
G1 X109.741 Y95.381 E0.00306 ; infill
;WIDTH:0.300931
G1 X109.714 Y95.401 E0.00072 ; infill
;WIDTH:0.293631
G1 X109.432 Y95.584 E0.00701 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.714 Y95.401 E-0.08878 ; wipe and retract
;WIPE_END
G1 E-2.31122 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 X114.325 Y115.409 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.356359
G1 F2400.000
G1 X114.026 Y115.440 E0.00782 ; infill
;WIDTH:0.343705
G1 X113.820 Y115.444 E0.00515 ; infill
;WIDTH:0.330256
G1 X112.658 Y115.486 E0.02778 ; infill
;WIDTH:0.301408
G1 X111.502 Y115.528 E0.02487 ; infill
;WIDTH:0.27282
G1 X111.044 Y115.542 E0.00876 ; infill
;WIDTH:0.254272
G1 X109.978 Y115.564 E0.01873 ; infill
;WIDTH:0.228721
G1 X109.089 Y115.590 E0.01374 ; infill
G1 X108.896 Y115.572 E0.00300 ; infill
;WIDTH:0.361818
G1 X108.562 Y115.537 E0.00890 ; infill
G1 X107.691 Y115.564 E0.02309 ; infill
;WIDTH:0.463734
G1 X103.989 Y115.633 E0.12957 ; infill
G1 X102.491 Y115.642 E0.05241 ; infill
G1 X97.115 Y115.616 E0.18813 ; infill
G1 X96.493 Y115.588 E0.02179 ; infill
G1 X96.276 Y115.555 E0.00768 ; infill
G1 X95.962 Y115.449 E0.01160 ; infill
;LAYER_CHANGE
;Z:2.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.276 Y115.555 E-0.08749 ; wipe and retract
G1 X96.493 Y115.588 E-0.05789 ; wipe and retract
G1 X97.115 Y115.616 E-0.16434 ; wipe and retract
G1 X102.491 Y115.642 E-1.41878 ; wipe and retract
G1 X103.989 Y115.633 E-0.39524 ; wipe and retract
G1 X104.581 Y115.622 E-0.15626 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.075 F10800.000 ; lift Z
G1 Z2.200 ; move to next layer (10)
;AFTER_LAYER_CHANGE
;2.2
G1 Z2.275 ; lift Z
G1 X95.813 Y108.672 ; move to first perimeter point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.702 Y108.741 E0.00443 ; perimeter
G1 X95.466 Y108.805 E0.00825 ; perimeter
G1 X95.169 Y109.092 E0.01399 ; perimeter
G1 X95.186 Y109.029 E0.00221 ; perimeter
G1 X95.346 Y108.829 E0.00866 ; perimeter
G1 X95.472 Y108.735 E0.00533 ; perimeter
G1 X95.667 Y108.659 E0.00709 ; perimeter
G1 X95.753 Y108.667 E0.00292 ; perimeter
G1 X96.709 Y108.554 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.822 Y108.596 E0.00556 ; perimeter
G1 X96.836 Y108.621 E0.00133 ; perimeter
G1 X96.817 Y108.664 E0.00215 ; perimeter
G1 X96.623 Y108.843 E0.01226 ; perimeter
G1 X96.396 Y108.973 E0.01211 ; perimeter
G1 X96.041 Y109.098 E0.01746 ; perimeter
G1 X95.896 Y109.187 E0.00789 ; perimeter
G1 X95.712 Y109.238 E0.00880 ; perimeter
G1 X95.496 Y109.446 E0.01395 ; perimeter
G1 X95.329 Y109.668 E0.01284 ; perimeter
G1 X95.099 Y110.400 E0.03553 ; perimeter
G1 X94.977 Y110.875 E0.02273 ; perimeter
G1 X94.889 Y111.372 E0.02339 ; perimeter
G1 X94.873 Y111.780 E0.01889 ; perimeter
G1 X95.005 Y112.372 E0.02812 ; perimeter
G1 X94.975 Y112.653 E0.01306 ; perimeter
G1 X94.791 Y113.046 E0.02012 ; perimeter
G1 X94.669 Y113.095 E0.00611 ; perimeter
G1 X94.551 Y113.062 E0.00570 ; perimeter
G1 X94.382 Y112.933 E0.00981 ; perimeter
G1 X94.314 Y112.821 E0.00608 ; perimeter
G1 X94.253 Y112.641 E0.00884 ; perimeter
G1 X94.177 Y112.532 E0.00613 ; perimeter
G1 X94.134 Y112.313 E0.01036 ; perimeter
G1 X94.131 Y111.969 E0.01596 ; perimeter
G1 X94.192 Y111.586 E0.01793 ; perimeter
G1 X94.336 Y111.070 E0.02482 ; perimeter
G1 X94.385 Y110.650 E0.01960 ; perimeter
G1 X94.662 Y109.112 E0.07238 ; perimeter
G1 X94.741 Y108.834 E0.01340 ; perimeter
G1 X95.008 Y108.480 E0.02055 ; perimeter
G1 X95.237 Y108.310 E0.01319 ; perimeter
G1 X95.598 Y108.169 E0.01795 ; perimeter
G1 X95.924 Y108.198 E0.01518 ; perimeter
G1 X96.181 Y108.288 E0.01262 ; perimeter
G1 X96.286 Y108.409 E0.00742 ; perimeter
G1 X96.614 Y108.461 E0.01540 ; perimeter
G1 X96.667 Y108.512 E0.00340 ; perimeter
G1 X96.731 Y108.672 F10800.000 ; move inwards before travel
G1 X95.062 Y109.309 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.347297
G1 F2400.000
G1 X94.993 Y109.467 E0.00436 ; infill
;WIDTH:0.338562
G1 X94.977 Y109.514 E0.00122 ; infill
;WIDTH:0.3238
G1 X94.912 Y109.778 E0.00636 ; infill
;WIDTH:0.289585
G1 X94.847 Y110.043 E0.00558 ; infill
;WIDTH:0.255369
G1 X94.782 Y110.307 E0.00481 ; infill
;WIDTH:0.221154
G1 X94.697 Y110.696 E0.00590 ; infill
;WIDTH:0.191504
G1 X94.677 Y110.807 E0.00140 ; infill
;WIDTH:0.176122
G1 X94.630 Y111.123 E0.00354 ; infill
;WIDTH:0.157122
G1 X94.556 Y111.502 E0.00366 ; infill
;WIDTH:0.253748
G1 X94.518 Y111.797 E0.00522 ; infill
G1 X94.522 Y111.998 E0.00352 ; infill
;WIDTH:0.370468
G1 X94.553 Y112.271 E0.00747 ; infill
G1 X94.598 Y112.441 E0.00479 ; infill
;WIDTH:0.355018
G1 X94.660 Y112.776 E0.00884 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.598 Y112.441 E-0.08992 ; wipe and retract
;WIPE_END
G1 E-2.31008 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X97.799 Y105.620 ; move to first perimeter point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X98.294 Y105.116 E0.02389 ; perimeter
G1 X98.205 Y105.505 E0.01348 ; perimeter
G1 X97.857 Y105.604 E0.01226 ; perimeter
G1 X98.537 Y105.957 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.363 Y105.961 E0.00804 ; perimeter
G1 X97.671 Y106.158 E0.03334 ; perimeter
G1 X97.122 Y106.383 E0.02748 ; perimeter
G1 X97.043 Y106.149 E0.01143 ; perimeter
G1 X97.083 Y105.899 E0.01172 ; perimeter
G1 X97.177 Y105.661 E0.01184 ; perimeter
G1 X97.331 Y105.409 E0.01365 ; perimeter
G1 X98.020 Y104.706 E0.04562 ; perimeter
G1 X98.483 Y104.327 E0.02774 ; perimeter
G1 X98.978 Y103.721 E0.03624 ; perimeter
G1 X99.226 Y103.465 E0.01649 ; perimeter
G1 X99.314 Y103.406 E0.00490 ; perimeter
G1 X99.721 Y102.950 E0.02830 ; perimeter
G1 X99.821 Y102.808 E0.00806 ; perimeter
G1 X100.685 Y101.957 E0.05618 ; perimeter
G1 X101.231 Y101.342 E0.03809 ; perimeter
G1 X101.471 Y101.024 E0.01846 ; perimeter
G1 X101.649 Y100.731 E0.01587 ; perimeter
G1 X102.058 Y100.297 E0.02762 ; perimeter
G1 X102.288 Y100.102 E0.01399 ; perimeter
G1 X102.591 Y99.904 E0.01677 ; perimeter
G1 X103.361 Y99.297 E0.04544 ; perimeter
G1 X103.577 Y99.044 E0.01540 ; perimeter
G1 X104.134 Y98.520 E0.03543 ; perimeter
G1 X104.439 Y98.293 E0.01762 ; perimeter
G1 X104.816 Y98.156 E0.01857 ; perimeter
G1 X105.146 Y97.930 E0.01851 ; perimeter
G1 X105.466 Y97.536 E0.02350 ; perimeter
G1 X105.908 Y97.164 E0.02679 ; perimeter
G1 X106.312 Y96.895 E0.02249 ; perimeter
G1 X106.724 Y96.459 E0.02778 ; perimeter
G1 X106.889 Y96.320 E0.00998 ; perimeter
G1 X106.990 Y96.252 E0.00564 ; perimeter
G1 X107.163 Y96.198 E0.00839 ; perimeter
G1 X107.492 Y96.206 E0.01525 ; perimeter
G1 X107.626 Y96.257 E0.00666 ; perimeter
G1 X107.703 Y96.331 E0.00492 ; perimeter
G1 X107.839 Y96.392 E0.00690 ; perimeter
G1 X107.891 Y96.533 E0.00699 ; perimeter
G1 X107.775 Y96.835 E0.01498 ; perimeter
G1 X107.657 Y96.970 E0.00829 ; perimeter
G1 X107.572 Y96.997 E0.00414 ; perimeter
G1 X107.283 Y97.171 E0.01564 ; perimeter
G1 X106.989 Y97.275 E0.01444 ; perimeter
G1 X106.840 Y97.478 E0.01166 ; perimeter
G1 X106.518 Y97.810 E0.02139 ; perimeter
G1 X106.228 Y98.060 E0.01776 ; perimeter
G1 X105.427 Y98.491 E0.04211 ; perimeter
G1 X105.121 Y98.906 E0.02391 ; perimeter
G1 X104.871 Y99.107 E0.01483 ; perimeter
G1 X104.478 Y99.278 E0.01986 ; perimeter
G1 X104.336 Y99.297 E0.00667 ; perimeter
G1 X103.981 Y99.474 E0.01836 ; perimeter
G1 X103.656 Y99.690 E0.01808 ; perimeter
G1 X103.142 Y100.150 E0.03198 ; perimeter
G1 X102.865 Y100.524 E0.02154 ; perimeter
G1 X102.793 Y100.700 E0.00878 ; perimeter
G1 X102.686 Y100.827 E0.00774 ; perimeter
G1 X102.610 Y100.963 E0.00718 ; perimeter
G1 X102.433 Y101.110 E0.01068 ; perimeter
G1 X102.341 Y101.220 E0.00665 ; perimeter
G1 X101.891 Y101.559 E0.02609 ; perimeter
G1 X101.551 Y101.904 E0.02246 ; perimeter
G1 X101.088 Y102.521 E0.03571 ; perimeter
G1 X100.706 Y103.111 E0.03254 ; perimeter
G1 X100.590 Y103.255 E0.00858 ; perimeter
G1 X100.454 Y103.406 E0.00939 ; perimeter
G1 X100.180 Y103.579 E0.01505 ; perimeter
G1 X99.782 Y103.956 E0.02534 ; perimeter
G1 X99.380 Y104.439 E0.02913 ; perimeter
G1 X99.120 Y104.663 E0.01588 ; perimeter
G1 X98.971 Y104.828 E0.01032 ; perimeter
G1 X98.771 Y105.192 E0.01926 ; perimeter
G1 X98.700 Y105.504 E0.01478 ; perimeter
G1 X98.723 Y105.599 E0.00455 ; perimeter
G1 X98.612 Y105.795 E0.01044 ; perimeter
G1 X98.622 Y105.896 E0.00470 ; perimeter
G1 X98.586 Y105.922 E0.00207 ; perimeter
G1 X98.399 Y105.852 F10800.000 ; move inwards before travel
G1 X98.434 Y104.918 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.354092
G1 F2400.000
G1 X98.554 Y104.775 E0.00482 ; infill
;WIDTH:0.259285
G1 X98.738 Y104.566 E0.00502 ; infill
;WIDTH:0.269339
G1 X98.878 Y104.404 E0.00402 ; infill
;WIDTH:0.282457
G1 X99.563 Y103.668 E0.02003 ; infill
;WIDTH:0.330396
G1 X99.954 Y103.267 E0.01340 ; infill
;WIDTH:0.363256
G1 X100.041 Y103.192 E0.00305 ; infill
G1 X100.151 Y103.087 F10800.000 ; move to first infill point
;WIDTH:0.403042
G1 F2400.000
G1 X100.474 Y102.729 E0.01444 ; infill
;WIDTH:0.290286
G1 X100.803 Y102.326 E0.01069 ; infill
;WIDTH:0.172922
G1 X101.321 Y101.701 E0.00878 ; infill
;WIDTH:0.184453
G1 X101.474 Y101.538 E0.00264 ; infill
;WIDTH:0.226423
G1 X101.676 Y101.304 E0.00472 ; infill
;WIDTH:0.261535
G1 X101.764 Y101.216 E0.00225 ; infill
;WIDTH:0.301324
G1 X101.835 Y101.138 E0.00227 ; infill
;WIDTH:0.341113
G1 X101.906 Y101.060 E0.00262 ; infill
;WIDTH:0.380655
G1 X102.973 Y99.963 E0.04299 ; infill
G1 X104.366 Y98.873 F10800.000 ; move to first infill point
;WIDTH:0.410232
G1 F2400.000
G1 X104.407 Y98.846 E0.00150 ; infill
;WIDTH:0.439359
G1 X105.202 Y98.390 E0.03020 ; infill
G1 X105.770 Y97.835 F10800.000 ; move to first infill point
;WIDTH:0.430484
G1 F2400.000
G1 X105.845 Y97.785 E0.00290 ; infill
;WIDTH:0.442671
G1 X106.376 Y97.355 E0.02271 ; infill
;WIDTH:0.322044
G1 X106.552 Y97.206 E0.00536 ; infill
G1 X106.732 Y96.994 E0.00645 ; infill
G1 X107.355 Y96.444 E0.01929 ; infill
G1 X107.404 Y96.617 F10800.000 ; move to first infill point
;WIDTH:0.389416
G1 F2400.000
G1 X107.401 Y96.618 E0.00009 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.404 Y96.617 E-0.00086 ; wipe and retract
;WIPE_END
G1 E-2.39914 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X110.777 Y94.712 ; move to first perimeter point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.857 Y94.692 E0.00383 ; perimeter
G1 X110.512 Y94.977 E0.02074 ; perimeter
G1 X110.362 Y95.289 E0.01603 ; perimeter
G1 X110.135 Y95.598 E0.01776 ; perimeter
G1 X110.089 Y95.618 E0.00232 ; perimeter
G1 X109.773 Y95.897 E0.01955 ; perimeter
G1 X109.535 Y96.032 E0.01263 ; perimeter
G1 X109.261 Y96.099 E0.01310 ; perimeter
G1 X108.952 Y96.126 E0.01435 ; perimeter
G1 X108.834 Y96.077 E0.00593 ; perimeter
G1 X108.893 Y95.875 E0.00974 ; perimeter
G1 X109.137 Y95.439 E0.02313 ; perimeter
G1 X109.456 Y95.110 E0.02126 ; perimeter
G1 X109.923 Y94.825 E0.02532 ; perimeter
G1 X110.224 Y94.728 E0.01464 ; perimeter
G1 X110.564 Y94.699 E0.01583 ; perimeter
G1 X110.717 Y94.708 E0.00708 ; perimeter
G1 X110.830 Y94.775 F10800.000 ; move inwards before travel
G1 X112.571 Y94.481 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.759 Y94.451 E0.00647 ; perimeter
G1 X112.625 Y94.493 E0.00476 ; perimeter
G1 X113.856 Y94.318 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.327 Y94.294 E0.01594 ; perimeter
G1 X114.349 Y94.330 E0.00141 ; perimeter
G1 X114.390 Y94.655 E0.01109 ; perimeter
G1 X114.191 Y94.389 E0.01125 ; perimeter
G1 X113.915 Y94.330 E0.00954 ; perimeter
G1 X113.815 Y94.802 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.429 Y94.720 E0.01832 ; perimeter
G1 X113.058 Y94.837 E0.01801 ; perimeter
G1 X112.823 Y94.957 E0.01220 ; perimeter
G1 X112.500 Y95.002 E0.01510 ; perimeter
G1 X112.405 Y94.944 E0.00517 ; perimeter
G1 X112.234 Y94.924 E0.00795 ; perimeter
G1 X112.081 Y94.855 E0.00780 ; perimeter
G1 X111.736 Y94.766 E0.01650 ; perimeter
G1 X111.636 Y94.643 E0.00732 ; perimeter
G1 X111.169 Y94.599 E0.02173 ; perimeter
G1 X111.433 Y94.339 E0.01716 ; perimeter
G1 X111.887 Y94.123 E0.02330 ; perimeter
G1 X112.587 Y93.986 E0.03304 ; perimeter
G1 X113.750 Y93.841 E0.05430 ; perimeter
G1 X114.395 Y93.810 E0.02991 ; perimeter
G1 X114.593 Y93.860 E0.00943 ; perimeter
G1 X114.707 Y93.992 E0.00810 ; perimeter
G1 X114.804 Y94.148 E0.00850 ; perimeter
G1 X114.889 Y94.752 E0.02826 ; perimeter
G1 X114.836 Y94.960 E0.00993 ; perimeter
G1 X114.817 Y95.199 E0.01109 ; perimeter
G1 X114.655 Y95.608 E0.02040 ; perimeter
G1 X114.642 Y95.735 E0.00588 ; perimeter
G1 X114.530 Y95.740 E0.00522 ; perimeter
G1 X114.451 Y95.605 E0.00727 ; perimeter
G1 X114.344 Y95.497 E0.00704 ; perimeter
G1 X114.377 Y95.397 E0.00485 ; perimeter
G1 X114.183 Y95.247 E0.01137 ; perimeter
G1 X114.177 Y95.173 E0.00343 ; perimeter
G1 X113.914 Y94.823 E0.02028 ; perimeter
G1 X113.874 Y94.815 E0.00188 ; perimeter
G1 X113.769 Y94.409 F10800.000 ; move inwards before travel
G1 X114.730 Y96.246 ; move to first perimeter point
G1 F1800.000
G1 X114.949 Y96.753 E0.02560 ; perimeter
G1 X115.054 Y97.310 E0.02624 ; perimeter
G1 X115.193 Y97.597 E0.01479 ; perimeter
G1 X115.309 Y98.232 E0.02990 ; perimeter
G1 X115.386 Y98.401 E0.00857 ; perimeter
G1 X115.406 Y98.510 E0.00515 ; perimeter
G1 X115.581 Y98.953 E0.02205 ; perimeter
G1 X115.740 Y99.431 E0.02334 ; perimeter
G1 X115.749 Y99.693 E0.01217 ; perimeter
G1 X115.721 Y99.781 E0.00426 ; perimeter
G1 X115.694 Y100.012 E0.01078 ; perimeter
G1 X115.563 Y100.262 E0.01308 ; perimeter
G1 X115.539 Y100.576 E0.01459 ; perimeter
G1 X115.505 Y100.749 E0.00818 ; perimeter
G1 X115.436 Y101.816 E0.04954 ; perimeter
G1 X115.347 Y102.528 E0.03322 ; perimeter
G1 X115.321 Y102.926 E0.01846 ; perimeter
G1 X115.249 Y103.263 E0.01599 ; perimeter
G1 X115.207 Y103.605 E0.01596 ; perimeter
G1 X115.152 Y103.315 E0.01367 ; perimeter
G1 X115.026 Y101.533 E0.08276 ; perimeter
G1 X115.012 Y100.841 E0.03204 ; perimeter
G1 X114.904 Y99.581 E0.05859 ; perimeter
G1 X114.910 Y99.252 E0.01526 ; perimeter
G1 X114.882 Y98.936 E0.01471 ; perimeter
G1 X114.879 Y98.593 E0.01587 ; perimeter
G1 X114.778 Y97.782 E0.03785 ; perimeter
G1 X114.749 Y96.949 E0.03863 ; perimeter
G1 X114.799 Y96.520 E0.01998 ; perimeter
G1 X114.736 Y96.302 E0.01055 ; perimeter
G1 X114.841 Y96.630 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.949 Y96.753 E-0.13179 ; wipe and retract
G1 X115.054 Y97.310 E-0.14947 ; wipe and retract
G1 X115.193 Y97.597 E-0.08425 ; wipe and retract
G1 X115.309 Y98.232 E-0.17032 ; wipe and retract
G1 X115.386 Y98.401 E-0.04882 ; wipe and retract
G1 X115.406 Y98.510 E-0.02933 ; wipe and retract
G1 X115.581 Y98.953 E-0.12561 ; wipe and retract
G1 X115.740 Y99.431 E-0.13294 ; wipe and retract
G1 X115.749 Y99.693 E-0.06932 ; wipe and retract
G1 X115.721 Y99.781 E-0.02426 ; wipe and retract
G1 X115.694 Y100.012 E-0.06139 ; wipe and retract
G1 X115.563 Y100.262 E-0.07449 ; wipe and retract
G1 X115.539 Y100.576 E-0.08311 ; wipe and retract
G1 X115.505 Y100.749 E-0.04660 ; wipe and retract
G1 X115.436 Y101.816 E-0.28225 ; wipe and retract
G1 X115.347 Y102.528 E-0.18923 ; wipe and retract
G1 X115.321 Y102.926 E-0.10516 ; wipe and retract
G1 X115.249 Y103.263 E-0.09107 ; wipe and retract
G1 X115.207 Y103.605 E-0.09094 ; wipe and retract
G1 X115.152 Y103.315 E-0.07788 ; wipe and retract
G1 X115.095 Y102.515 E-0.21178 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X115.144 Y98.553 ; move to first infill point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.0988719
G1 F2400.000
G1 X115.148 Y98.587 E0.00016 ; infill
;WIDTH:0.140013
G1 X115.169 Y98.698 E0.00091 ; infill
;WIDTH:0.181156
G1 X115.191 Y98.809 E0.00130 ; infill
;WIDTH:0.222298
G1 X115.213 Y98.920 E0.00168 ; infill
;WIDTH:0.267564
G1 X115.249 Y99.073 E0.00295 ; infill
;WIDTH:0.309152
G1 X115.284 Y99.246 E0.00390 ; infill
;WIDTH:0.353422
G1 X115.304 Y99.376 E0.00339 ; infill
;WIDTH:0.370939
G1 X115.329 Y99.635 E0.00712 ; infill
G1 X115.311 Y100.401 E0.02089 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.329 Y99.635 E-0.20214 ; wipe and retract
G1 X115.304 Y99.376 E-0.06885 ; wipe and retract
;WIPE_END
G1 E-2.12901 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X112.386 Y94.691 ; move to first infill point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.140233
G1 F2400.000
G1 X111.923 Y94.474 E0.00414 ; infill
G1 X111.849 Y94.409 E0.00080 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.923 Y94.474 E-0.02611 ; wipe and retract
G1 X112.386 Y94.691 E-0.13503 ; wipe and retract
;WIPE_END
G1 E-2.23886 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X109.886 Y95.294 ; move to first infill point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.323913
G1 F2400.000
G1 X109.701 Y95.429 E0.00536 ; infill
G1 X109.181 Y95.871 E0.01594 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.701 Y95.429 E-0.18002 ; wipe and retract
G1 X109.886 Y95.294 E-0.06057 ; wipe and retract
;WIPE_END
G1 E-2.15941 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X114.976 Y115.071 ; move to first perimeter point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.985 Y115.220 E0.00508 ; perimeter
G1 X114.963 Y115.310 E0.00313 ; perimeter
G1 X114.766 Y115.334 E0.00673 ; perimeter
G1 X114.938 Y115.118 E0.00936 ; perimeter
G1 X114.561 Y114.817 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.616 Y114.748 E0.00408 ; perimeter
G1 X114.785 Y114.316 E0.02149 ; perimeter
G1 X115.038 Y112.737 E0.07407 ; perimeter
G1 X115.024 Y112.231 E0.02345 ; perimeter
G1 X115.052 Y111.924 E0.01429 ; perimeter
G1 X115.033 Y111.613 E0.01441 ; perimeter
G1 X115.043 Y111.002 E0.02834 ; perimeter
G1 X115.065 Y110.982 E0.00137 ; perimeter
G1 X115.143 Y110.461 E0.02438 ; perimeter
G1 X115.120 Y110.264 E0.00921 ; perimeter
G1 X115.169 Y109.653 E0.02838 ; perimeter
G1 X115.284 Y108.808 E0.03950 ; perimeter
G1 X115.344 Y108.913 E0.00559 ; perimeter
G1 X115.387 Y109.086 E0.00824 ; perimeter
G1 X115.506 Y109.910 E0.03859 ; perimeter
G1 X115.554 Y110.138 E0.01079 ; perimeter
G1 X115.591 Y110.213 E0.00389 ; perimeter
G1 X115.652 Y110.617 E0.01890 ; perimeter
G1 X115.752 Y110.815 E0.01028 ; perimeter
G1 X115.846 Y111.268 E0.02143 ; perimeter
G1 X115.853 Y111.623 E0.01645 ; perimeter
G1 X115.799 Y112.133 E0.02378 ; perimeter
G1 X115.775 Y112.171 E0.00208 ; perimeter
G1 X115.653 Y112.784 E0.02893 ; perimeter
G1 X115.459 Y115.074 E0.10645 ; perimeter
G1 X115.471 Y115.264 E0.00882 ; perimeter
G1 X115.406 Y115.527 E0.01259 ; perimeter
G1 X115.374 Y115.589 E0.00321 ; perimeter
G1 X115.303 Y115.695 E0.00590 ; perimeter
G1 X115.204 Y115.767 E0.00566 ; perimeter
G1 X114.683 Y115.829 E0.02432 ; perimeter
G1 X113.937 Y115.812 E0.03458 ; perimeter
G1 X113.875 Y115.796 E0.00294 ; perimeter
G1 X110.440 Y115.796 E0.15912 ; perimeter
G1 X109.542 Y115.768 E0.04164 ; perimeter
G1 X106.171 Y115.998 E0.15652 ; perimeter
G1 X104.078 Y116.076 E0.09700 ; perimeter
G1 X103.609 Y116.130 E0.02187 ; perimeter
G1 X102.741 Y116.100 E0.04021 ; perimeter
G1 X97.206 Y116.023 E0.25641 ; perimeter
G1 X97.056 Y116.067 E0.00726 ; perimeter
G1 X96.351 Y116.076 E0.03267 ; perimeter
G1 X95.958 Y115.986 E0.01868 ; perimeter
G1 X95.872 Y115.936 E0.00460 ; perimeter
G1 X95.796 Y115.828 E0.00612 ; perimeter
G1 X95.742 Y115.606 E0.01056 ; perimeter
G1 X95.783 Y115.402 E0.00968 ; perimeter
G1 X95.947 Y115.241 E0.01063 ; perimeter
G1 X96.229 Y115.184 E0.01330 ; perimeter
G1 X96.447 Y115.226 E0.01028 ; perimeter
G1 X96.970 Y115.268 E0.02431 ; perimeter
G1 X97.150 Y115.303 E0.00849 ; perimeter
G1 X102.506 Y115.296 E0.24813 ; perimeter
G1 X103.249 Y115.255 E0.03447 ; perimeter
G1 X105.352 Y115.306 E0.09743 ; perimeter
G1 X106.418 Y115.304 E0.04938 ; perimeter
G1 X108.611 Y115.382 E0.10166 ; perimeter
G1 X109.976 Y115.356 E0.06321 ; perimeter
G1 X111.604 Y115.247 E0.07560 ; perimeter
G1 X113.353 Y115.155 E0.08113 ; perimeter
G1 X113.991 Y115.071 E0.02979 ; perimeter
G1 X114.479 Y114.920 E0.02370 ; perimeter
G1 X114.524 Y114.864 E0.00330 ; perimeter
G1 X114.645 Y114.844 F10800.000 ; move inwards before travel
G1 X114.411 Y115.392 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350648
G1 F2400.000
G1 X114.083 Y115.438 E0.00849 ; infill
;WIDTH:0.315744
G1 X113.989 Y115.444 E0.00214 ; infill
;WIDTH:0.299244
G1 X113.936 Y115.440 E0.00112 ; infill
;WIDTH:0.279109
G1 X113.906 Y115.440 E0.00059 ; infill
;WIDTH:0.271376
G1 X113.646 Y115.458 E0.00496 ; infill
;WIDTH:0.237244
G1 X113.386 Y115.475 E0.00422 ; infill
;WIDTH:0.20311
G1 X112.500 Y115.498 E0.01180 ; infill
;WIDTH:0.156397
G1 X111.620 Y115.521 E0.00830 ; infill
;WIDTH:0.110257
G1 X111.396 Y115.528 E0.00126 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.620 Y115.521 E-0.05936 ; wipe and retract
;WIPE_END
G1 E-2.34064 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X107.797 Y115.620 ; move to first infill point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.143835
G1 F2400.000
G1 X106.874 Y115.635 E0.00775 ; infill
;WIDTH:0.237664
G1 X104.700 Y115.671 E0.03521 ; infill
;WIDTH:0.362208
G1 X103.591 Y115.697 E0.02944 ; infill
G1 X99.844 Y115.679 E0.09948 ; infill
;WIDTH:0.321319
G1 X97.175 Y115.662 E0.06179 ; infill
;WIDTH:0.285117
G1 X97.102 Y115.669 E0.00147 ; infill
G1 X96.997 Y115.674 F10800.000 ; move to first infill point
;WIDTH:0.3646
G1 F2400.000
G1 X96.396 Y115.649 E0.01608 ; infill
G1 X95.996 Y115.566 E0.01094 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.396 Y115.649 E-0.10792 ; wipe and retract
G1 X96.997 Y115.674 E-0.15865 ; wipe and retract
;WIPE_END
G1 E-2.13343 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 X115.156 Y114.310 ; move to first infill point
G1 Z2.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.292237
G1 F2400.000
G1 X115.219 Y113.795 E0.01077 ; infill
;WIDTH:0.178745
G1 X115.347 Y112.736 E0.01204 ; infill
;WIDTH:0.21578
G1 X115.361 Y112.572 E0.00237 ; infill
;WIDTH:0.252814
G1 X115.375 Y112.407 E0.00288 ; infill
;WIDTH:0.289849
G1 X115.389 Y112.243 E0.00339 ; infill
;WIDTH:0.310051
G1 X115.417 Y112.054 E0.00425 ; infill
;WIDTH:0.327696
G1 X115.436 Y111.919 E0.00322 ; infill
;WIDTH:0.353585
G1 X115.440 Y111.762 E0.00405 ; infill
;WIDTH:0.369573
G1 X115.427 Y111.154 E0.01652 ; infill
;LAYER_CHANGE
;Z:2.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.440 Y111.762 E-0.16054 ; wipe and retract
;WIPE_END
G1 E-2.23946 F2400.000 ; retract
G1 Z2.275 F10800.000 ; lift Z
G1 Z2.400 ; move to next layer (11)
;AFTER_LAYER_CHANGE
;2.4
G1 Z2.475 ; lift Z
G1 X107.809 Y115.611 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.463 Y115.686 E0.01641 ; perimeter
G1 X105.575 Y115.889 E0.08796 ; perimeter
G1 X104.615 Y115.952 E0.04455 ; perimeter
G1 X104.285 Y116.048 E0.01590 ; perimeter
G1 X103.612 Y116.135 E0.03146 ; perimeter
G1 X103.053 Y116.114 E0.02590 ; perimeter
G1 X102.693 Y116.005 E0.01744 ; perimeter
G1 X97.185 Y115.912 E0.25516 ; perimeter
G1 X96.968 Y115.942 E0.01015 ; perimeter
G1 X96.911 Y115.987 E0.00335 ; perimeter
G1 X96.668 Y116.057 E0.01171 ; perimeter
G1 X96.119 Y116.077 E0.02548 ; perimeter
G1 X95.902 Y116.031 E0.01027 ; perimeter
G1 X95.774 Y115.976 E0.00645 ; perimeter
G1 X95.702 Y115.877 E0.00566 ; perimeter
G1 X95.629 Y115.684 E0.00954 ; perimeter
G1 X95.655 Y115.549 E0.00640 ; perimeter
G1 X95.735 Y115.425 E0.00681 ; perimeter
G1 X95.915 Y115.331 E0.00942 ; perimeter
G1 X96.284 Y115.250 E0.01748 ; perimeter
G1 X96.682 Y115.330 E0.01883 ; perimeter
G1 X96.741 Y115.373 E0.00336 ; perimeter
G1 X97.188 Y115.454 E0.02106 ; perimeter
G1 X98.708 Y115.469 E0.07041 ; perimeter
G1 X101.233 Y115.416 E0.11698 ; perimeter
G1 X102.525 Y115.409 E0.05987 ; perimeter
G1 X102.711 Y115.401 E0.00860 ; perimeter
G1 X103.404 Y115.294 E0.03250 ; perimeter
G1 X103.606 Y115.322 E0.00945 ; perimeter
G1 X104.154 Y115.346 E0.02539 ; perimeter
G1 X104.508 Y115.444 E0.01702 ; perimeter
G1 X105.557 Y115.462 E0.04861 ; perimeter
G1 X106.956 Y115.535 E0.06487 ; perimeter
G1 X107.749 Y115.606 E0.03690 ; perimeter
G1 X107.457 Y115.654 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.463 Y115.686 E-0.07851 ; wipe and retract
G1 X105.575 Y115.889 E-0.50109 ; wipe and retract
G1 X104.615 Y115.952 E-0.25379 ; wipe and retract
G1 X104.285 Y116.048 E-0.09060 ; wipe and retract
G1 X103.612 Y116.135 E-0.17921 ; wipe and retract
G1 X103.053 Y116.114 E-0.14757 ; wipe and retract
G1 X102.693 Y116.005 E-0.09937 ; wipe and retract
G1 X99.169 Y115.946 E-0.92985 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X104.488 Y115.738 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.282062
G1 F2400.000
G1 X104.097 Y115.704 E0.00779 ; infill
G1 X103.563 Y115.726 E0.01064 ; infill
;WIDTH:0.389446
G1 X103.408 Y115.713 E0.00447 ; infill
G1 X102.982 Y115.738 E0.01229 ; infill
;WIDTH:0.361863
G1 X102.556 Y115.762 E0.01131 ; infill
G1 X102.749 Y115.704 F10800.000 ; move to first infill point
;WIDTH:0.170952
G1 F2400.000
G1 X102.533 Y115.706 E0.00229 ; infill
;WIDTH:0.154995
G1 X101.237 Y115.698 E0.01208 ; infill
;WIDTH:0.125454
G1 X100.459 Y115.700 E0.00534 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.237 Y115.698 E-0.20517 ; wipe and retract
;WIPE_END
G1 E-2.19483 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X96.948 Y115.698 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.265015
G1 F2400.000
G1 X96.612 Y115.707 E0.00621 ; infill
G1 X96.405 Y115.674 E0.00387 ; infill
;WIDTH:0.37254
G1 X96.289 Y115.665 E0.00319 ; infill
G1 X95.899 Y115.714 E0.01079 ; infill
G1 X95.929 Y115.779 F10800.000 ; move to first infill point
;WIDTH:0.218664
G1 F2400.000
G1 X95.992 Y115.714 E0.00132 ; infill
;WIDTH:0.251292
G1 X96.005 Y115.700 E0.00032 ; infill
;WIDTH:0.283921
G1 X96.017 Y115.686 E0.00037 ; infill
;WIDTH:0.301438
G1 X96.647 Y115.600 E0.01367 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.017 Y115.686 E-0.16780 ; wipe and retract
;WIPE_END
G1 E-2.23220 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X114.906 Y115.321 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.977 Y115.231 E0.00387 ; perimeter
G1 X114.964 Y115.311 E0.00274 ; perimeter
G1 X115.311 Y115.704 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.218 Y115.764 E0.00512 ; perimeter
G1 X114.824 Y115.819 E0.01844 ; perimeter
G1 X114.606 Y115.785 E0.01023 ; perimeter
G1 X114.331 Y115.781 E0.01274 ; perimeter
G1 X113.977 Y115.689 E0.01693 ; perimeter
G1 X113.451 Y115.695 E0.02439 ; perimeter
G1 X112.422 Y115.659 E0.04767 ; perimeter
G1 X111.158 Y115.586 E0.05867 ; perimeter
G1 X110.857 Y115.546 E0.01406 ; perimeter
G1 X112.088 Y115.377 E0.05755 ; perimeter
G1 X113.444 Y115.264 E0.06303 ; perimeter
G1 X114.195 Y115.160 E0.03512 ; perimeter
G1 X114.379 Y115.031 E0.01042 ; perimeter
G1 X114.567 Y114.973 E0.00909 ; perimeter
G1 X114.809 Y114.669 E0.01801 ; perimeter
G1 X114.894 Y114.447 E0.01102 ; perimeter
G1 X115.104 Y113.235 E0.05696 ; perimeter
G1 X115.200 Y112.475 E0.03550 ; perimeter
G1 X115.130 Y112.263 E0.01030 ; perimeter
G1 X115.110 Y111.890 E0.01730 ; perimeter
G1 X115.058 Y111.768 E0.00615 ; perimeter
G1 X115.036 Y111.460 E0.01430 ; perimeter
G1 X115.055 Y111.062 E0.01848 ; perimeter
G1 X115.118 Y111.005 E0.00392 ; perimeter
G1 X115.154 Y110.769 E0.01105 ; perimeter
G1 X115.188 Y110.684 E0.00425 ; perimeter
G1 X115.363 Y110.580 E0.00945 ; perimeter
G1 X115.385 Y110.403 E0.00828 ; perimeter
G1 X115.565 Y110.677 E0.01515 ; perimeter
G1 X115.609 Y110.712 E0.00263 ; perimeter
G1 X115.780 Y111.050 E0.01753 ; perimeter
G1 X115.862 Y111.440 E0.01848 ; perimeter
G1 X115.831 Y111.801 E0.01680 ; perimeter
G1 X115.720 Y111.999 E0.01052 ; perimeter
G1 X115.621 Y112.396 E0.01893 ; perimeter
G1 X115.544 Y112.516 E0.00659 ; perimeter
G1 X115.429 Y114.269 E0.08139 ; perimeter
G1 X115.451 Y114.605 E0.01559 ; perimeter
G1 X115.426 Y114.913 E0.01431 ; perimeter
G1 X115.459 Y115.330 E0.01940 ; perimeter
G1 X115.400 Y115.546 E0.01038 ; perimeter
G1 X115.341 Y115.652 E0.00562 ; perimeter
G1 X115.205 Y115.675 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.218 Y115.764 E-0.04376 ; wipe and retract
G1 X114.824 Y115.819 E-0.10504 ; wipe and retract
G1 X114.606 Y115.785 E-0.05829 ; wipe and retract
G1 X114.331 Y115.781 E-0.07257 ; wipe and retract
G1 X113.977 Y115.689 E-0.09645 ; wipe and retract
G1 X113.451 Y115.695 E-0.13894 ; wipe and retract
G1 X112.422 Y115.659 E-0.27156 ; wipe and retract
G1 X111.158 Y115.586 E-0.33426 ; wipe and retract
G1 X110.857 Y115.546 E-0.08008 ; wipe and retract
G1 X112.088 Y115.377 E-0.32785 ; wipe and retract
G1 X113.444 Y115.264 E-0.35909 ; wipe and retract
G1 X114.195 Y115.160 E-0.20010 ; wipe and retract
G1 X114.379 Y115.031 E-0.05935 ; wipe and retract
G1 X114.567 Y114.973 E-0.05179 ; wipe and retract
G1 X114.758 Y114.733 E-0.08086 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X115.392 Y112.221 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.142155
G1 F2400.000
G1 X115.408 Y112.057 E0.00137 ; infill
;WIDTH:0.18739
G1 X115.424 Y111.892 E0.00199 ; infill
;WIDTH:0.19619
G1 X115.427 Y111.872 E0.00026 ; infill
;WIDTH:0.220049
G1 X115.437 Y111.830 E0.00063 ; infill
;WIDTH:0.245648
G1 X115.538 Y111.110 E0.01226 ; infill
G1 X115.423 Y110.879 F10800.000 ; move to first infill point
;WIDTH:0.270157
G1 F2400.000
G1 X115.445 Y111.179 E0.00568 ; infill
;WIDTH:0.313474
G1 X115.433 Y111.229 E0.00115 ; infill
;WIDTH:0.325992
G1 X115.429 Y111.241 E0.00029 ; infill
;WIDTH:0.34911
G1 X115.446 Y111.675 E0.01105 ; infill
G1 X115.488 Y111.934 E0.00668 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.446 Y111.675 E-0.06921 ; wipe and retract
G1 X115.429 Y111.241 E-0.11455 ; wipe and retract
;WIPE_END
G1 E-2.21624 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X115.107 Y98.369 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.225 Y98.530 E0.00923 ; perimeter
G1 X115.289 Y98.559 E0.00326 ; perimeter
G1 X115.423 Y98.890 E0.01652 ; perimeter
G1 X115.585 Y99.047 E0.01048 ; perimeter
G1 X115.722 Y99.270 E0.01211 ; perimeter
G1 X115.771 Y99.437 E0.00808 ; perimeter
G1 X115.780 Y99.701 E0.01223 ; perimeter
G1 X115.726 Y99.896 E0.00939 ; perimeter
G1 X115.583 Y100.171 E0.01435 ; perimeter
G1 X115.544 Y100.184 E0.00191 ; perimeter
G1 X115.357 Y100.437 E0.01459 ; perimeter
G1 X115.247 Y100.775 E0.01644 ; perimeter
G1 X115.236 Y100.527 E0.01152 ; perimeter
G1 X115.090 Y100.261 E0.01403 ; perimeter
G1 X115.078 Y100.152 E0.00510 ; perimeter
G1 X114.995 Y100.009 E0.00764 ; perimeter
G1 X114.974 Y99.930 E0.00377 ; perimeter
G1 X114.944 Y99.570 E0.01675 ; perimeter
G1 X114.951 Y99.187 E0.01774 ; perimeter
G1 X115.049 Y99.048 E0.00787 ; perimeter
G1 X115.037 Y98.650 E0.01845 ; perimeter
G1 X115.103 Y98.584 E0.00434 ; perimeter
G1 X115.106 Y98.429 E0.00714 ; perimeter
G1 X115.173 Y98.557 F10800.000 ; move inwards before travel
G1 X115.307 Y99.113 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.388726
G1 F2400.000
G1 X115.365 Y99.652 E0.01557 ; infill
G1 X115.326 Y100.074 E0.01218 ; infill
G1 X115.281 Y100.021 F10800.000 ; move to first infill point
;WIDTH:0.291077
G1 F2400.000
G1 X115.322 Y99.128 E0.01844 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.281 Y100.021 E-0.23577 ; wipe and retract
;WIPE_END
G1 E-2.16423 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X112.649 Y94.632 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.549 Y94.557 E0.00423 ; perimeter
G1 X112.870 Y94.488 E0.01112 ; perimeter
G1 X112.700 Y94.599 E0.00690 ; perimeter
G1 X113.924 Y94.328 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.322 Y94.297 E0.01351 ; perimeter
G1 X114.358 Y94.555 E0.00883 ; perimeter
G1 X113.977 Y94.356 E0.01455 ; perimeter
G1 X113.384 Y94.729 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.870 Y95.063 E0.02840 ; perimeter
G1 X112.723 Y95.127 E0.00742 ; perimeter
G1 X112.499 Y95.119 E0.01038 ; perimeter
G1 X112.374 Y95.045 E0.00673 ; perimeter
G1 X112.078 Y94.807 E0.01759 ; perimeter
G1 X111.969 Y94.778 E0.00522 ; perimeter
G1 X111.915 Y94.708 E0.00412 ; perimeter
G1 X111.880 Y94.618 E0.00446 ; perimeter
G1 X111.735 Y94.471 E0.00960 ; perimeter
G1 X111.838 Y94.330 E0.00808 ; perimeter
G1 X112.218 Y94.135 E0.01981 ; perimeter
G1 X113.036 Y93.960 E0.03872 ; perimeter
G1 X113.745 Y93.859 E0.03319 ; perimeter
G1 X114.276 Y93.814 E0.02466 ; perimeter
G1 X114.442 Y93.817 E0.00771 ; perimeter
G1 X114.593 Y93.880 E0.00757 ; perimeter
G1 X114.652 Y93.930 E0.00361 ; perimeter
G1 X114.765 Y94.084 E0.00884 ; perimeter
G1 X114.851 Y94.602 E0.02429 ; perimeter
G1 X114.758 Y94.971 E0.01764 ; perimeter
G1 X114.693 Y95.098 E0.00661 ; perimeter
G1 X114.499 Y95.184 E0.00984 ; perimeter
G1 X114.423 Y95.169 E0.00356 ; perimeter
G1 X114.254 Y95.056 E0.00942 ; perimeter
G1 X114.169 Y95.038 E0.00402 ; perimeter
G1 X114.105 Y94.967 E0.00444 ; perimeter
G1 X113.766 Y94.789 E0.01773 ; perimeter
G1 X113.444 Y94.738 E0.01512 ; perimeter
G1 X113.097 Y94.451 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.870 Y95.063 E-0.17389 ; wipe and retract
G1 X112.723 Y95.127 E-0.04230 ; wipe and retract
G1 X112.499 Y95.119 E-0.05913 ; wipe and retract
G1 X112.374 Y95.045 E-0.03831 ; wipe and retract
G1 X112.078 Y94.807 E-0.10021 ; wipe and retract
G1 X111.969 Y94.778 E-0.02972 ; wipe and retract
G1 X111.915 Y94.708 E-0.02346 ; wipe and retract
G1 X111.880 Y94.618 E-0.02541 ; wipe and retract
G1 X111.735 Y94.471 E-0.05468 ; wipe and retract
G1 X111.838 Y94.330 E-0.04606 ; wipe and retract
G1 X112.218 Y94.135 E-0.11283 ; wipe and retract
G1 X113.036 Y93.960 E-0.22060 ; wipe and retract
G1 X113.745 Y93.859 E-0.18909 ; wipe and retract
G1 X114.276 Y93.814 E-0.14049 ; wipe and retract
G1 X114.442 Y93.817 E-0.04394 ; wipe and retract
G1 X114.593 Y93.880 E-0.04310 ; wipe and retract
G1 X114.652 Y93.930 E-0.02056 ; wipe and retract
G1 X114.765 Y94.084 E-0.05037 ; wipe and retract
G1 X114.851 Y94.602 E-0.13841 ; wipe and retract
G1 X114.758 Y94.971 E-0.10052 ; wipe and retract
G1 X114.693 Y95.098 E-0.03767 ; wipe and retract
G1 X114.499 Y95.184 E-0.05606 ; wipe and retract
G1 X114.423 Y95.169 E-0.02029 ; wipe and retract
G1 X114.254 Y95.056 E-0.05365 ; wipe and retract
G1 X114.169 Y95.038 E-0.02293 ; wipe and retract
G1 X114.105 Y94.967 E-0.02527 ; wipe and retract
G1 X113.766 Y94.789 E-0.10102 ; wipe and retract
G1 X113.444 Y94.738 E-0.08615 ; wipe and retract
;WIPE_END
G1 E-0.34389 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X98.112 Y105.317 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X98.049 Y105.382 E0.00309 ; perimeter
G1 X98.070 Y105.360 E0.00106 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.049 Y105.382 E-0.00823 ; wipe and retract
G1 X98.070 Y105.360 E-0.00823 ; wipe and retract
;WIPE_END
G1 E-2.38354 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X106.979 Y97.250 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.653 Y97.694 E0.02552 ; perimeter
G1 X106.407 Y97.951 E0.01645 ; perimeter
G1 X106.169 Y98.166 E0.01485 ; perimeter
G1 X105.608 Y98.520 E0.03072 ; perimeter
G1 X105.463 Y98.704 E0.01087 ; perimeter
G1 X105.108 Y99.012 E0.02175 ; perimeter
G1 X104.934 Y99.122 E0.00954 ; perimeter
G1 X104.555 Y99.246 E0.01848 ; perimeter
G1 X104.320 Y99.275 E0.01099 ; perimeter
G1 X104.233 Y99.232 E0.00450 ; perimeter
G1 X103.894 Y99.389 E0.01730 ; perimeter
G1 X103.879 Y99.378 E0.00087 ; perimeter
G1 X103.556 Y99.495 E0.01587 ; perimeter
G1 X103.322 Y99.755 E0.01621 ; perimeter
G1 X103.058 Y99.961 E0.01549 ; perimeter
G1 X102.874 Y100.389 E0.02163 ; perimeter
G1 X102.876 Y100.473 E0.00385 ; perimeter
G1 X102.802 Y100.680 E0.01021 ; perimeter
G1 X102.664 Y100.943 E0.01374 ; perimeter
G1 X102.441 Y101.198 E0.01572 ; perimeter
G1 X101.867 Y101.662 E0.03418 ; perimeter
G1 X101.473 Y102.081 E0.02665 ; perimeter
G1 X101.058 Y102.622 E0.03155 ; perimeter
G1 X100.722 Y103.138 E0.02856 ; perimeter
G1 X100.532 Y103.370 E0.01385 ; perimeter
G1 X100.356 Y103.498 E0.01010 ; perimeter
G1 X100.121 Y103.610 E0.01204 ; perimeter
G1 X99.849 Y103.839 E0.01648 ; perimeter
G1 X99.307 Y104.575 E0.04237 ; perimeter
G1 X99.004 Y104.866 E0.01945 ; perimeter
G1 X98.793 Y105.114 E0.01508 ; perimeter
G1 X98.696 Y105.304 E0.00989 ; perimeter
G1 X98.649 Y105.337 E0.00268 ; perimeter
G1 X98.484 Y105.642 E0.01603 ; perimeter
G1 X98.222 Y105.870 E0.01611 ; perimeter
G1 X98.168 Y105.940 E0.00411 ; perimeter
G1 X97.949 Y106.006 E0.01057 ; perimeter
G1 X97.901 Y106.059 E0.00334 ; perimeter
G1 X97.747 Y106.119 E0.00763 ; perimeter
G1 X97.633 Y106.258 E0.00834 ; perimeter
G1 X97.511 Y106.362 E0.00742 ; perimeter
G1 X97.390 Y106.411 E0.00607 ; perimeter
G1 X96.809 Y106.866 E0.03417 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X96.492 Y107.091 E0.01625 ; perimeter (bridge)
G1 X96.540 Y106.869 E0.00945 ; perimeter (bridge)
G1 X96.603 Y106.724 E0.00663 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X96.692 Y106.517 E0.01043 ; perimeter
G1 X96.805 Y106.326 E0.01031 ; perimeter
G1 X96.984 Y105.874 E0.02249 ; perimeter
G1 X97.179 Y105.586 E0.01610 ; perimeter
G1 X98.990 Y103.721 E0.12045 ; perimeter
G1 X99.420 Y103.427 E0.02414 ; perimeter
G1 X99.682 Y103.108 E0.01908 ; perimeter
G1 X99.915 Y102.745 E0.01999 ; perimeter
G1 X100.152 Y102.516 E0.01529 ; perimeter
G1 X100.399 Y102.224 E0.01770 ; perimeter
G1 X100.634 Y101.985 E0.01552 ; perimeter
G1 X101.200 Y101.313 E0.04071 ; perimeter
G1 X101.492 Y100.911 E0.02302 ; perimeter
G1 X101.805 Y100.567 E0.02154 ; perimeter
G1 X102.241 Y100.236 E0.02535 ; perimeter
G1 X103.011 Y99.853 E0.03985 ; perimeter
G1 X103.238 Y99.682 E0.01315 ; perimeter
G1 X103.888 Y99.000 E0.04365 ; perimeter
G1 X103.966 Y98.824 E0.00890 ; perimeter
G1 X104.209 Y98.547 E0.01711 ; perimeter
G1 X104.513 Y98.315 E0.01770 ; perimeter
G1 X104.986 Y98.124 E0.02363 ; perimeter
G1 X105.297 Y97.902 E0.01767 ; perimeter
G1 X105.493 Y97.608 E0.01640 ; perimeter
G1 X105.587 Y97.515 E0.00609 ; perimeter
G1 X106.180 Y97.013 E0.03601 ; perimeter
G1 X106.373 Y96.880 E0.01087 ; perimeter
G1 X106.758 Y96.484 E0.02558 ; perimeter
G1 X107.059 Y96.261 E0.01733 ; perimeter
G1 X107.330 Y96.203 E0.01282 ; perimeter
G1 X107.743 Y96.226 E0.01918 ; perimeter
G1 X108.057 Y96.380 E0.01622 ; perimeter
G1 X108.332 Y96.245 E0.01416 ; perimeter
G1 X108.612 Y96.161 E0.01356 ; perimeter
G1 X108.720 Y95.909 E0.01268 ; perimeter
G1 X108.856 Y95.695 E0.01175 ; perimeter
G1 X109.163 Y95.355 E0.02123 ; perimeter
G1 X109.455 Y95.147 E0.01657 ; perimeter
G1 X109.631 Y95.053 E0.00927 ; perimeter
G1 X109.942 Y94.945 E0.01524 ; perimeter
G1 X110.190 Y94.929 E0.01150 ; perimeter
G1 X110.264 Y95.120 E0.00948 ; perimeter
G1 X110.177 Y95.360 E0.01186 ; perimeter
G1 X110.180 Y95.444 E0.00387 ; perimeter
G1 X110.050 Y95.671 E0.01212 ; perimeter
G1 X110.027 Y95.765 E0.00450 ; perimeter
G1 X109.862 Y95.910 E0.01015 ; perimeter
G1 X109.834 Y95.998 E0.00428 ; perimeter
G1 X109.717 Y96.064 E0.00625 ; perimeter
G1 X109.652 Y96.138 E0.00455 ; perimeter
G1 X109.149 Y96.279 E0.02419 ; perimeter
G1 X108.885 Y96.301 E0.01229 ; perimeter
G1 X108.286 Y96.544 E0.02991 ; perimeter
G1 X108.053 Y96.757 E0.01463 ; perimeter
G1 X107.935 Y96.822 E0.00624 ; perimeter
G1 X107.775 Y96.995 E0.01091 ; perimeter
G1 X107.592 Y97.050 E0.00888 ; perimeter
G1 X107.274 Y97.183 E0.01594 ; perimeter
G1 X107.037 Y97.237 E0.01125 ; perimeter
G1 X106.599 Y97.125 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.653 Y97.694 E-0.15772 ; wipe and retract
G1 X106.407 Y97.951 E-0.09374 ; wipe and retract
G1 X106.169 Y98.166 E-0.08460 ; wipe and retract
G1 X105.608 Y98.520 E-0.17504 ; wipe and retract
G1 X105.463 Y98.704 E-0.06190 ; wipe and retract
G1 X105.108 Y99.012 E-0.12393 ; wipe and retract
G1 X104.934 Y99.122 E-0.05433 ; wipe and retract
G1 X104.555 Y99.246 E-0.10528 ; wipe and retract
G1 X104.320 Y99.275 E-0.06263 ; wipe and retract
G1 X104.233 Y99.232 E-0.02563 ; wipe and retract
G1 X103.894 Y99.389 E-0.09853 ; wipe and retract
G1 X103.879 Y99.378 E-0.00493 ; wipe and retract
G1 X103.556 Y99.495 E-0.09040 ; wipe and retract
G1 X103.322 Y99.755 E-0.09234 ; wipe and retract
G1 X103.058 Y99.961 E-0.08826 ; wipe and retract
G1 X102.874 Y100.389 E-0.12321 ; wipe and retract
G1 X102.876 Y100.473 E-0.02196 ; wipe and retract
G1 X102.802 Y100.680 E-0.05818 ; wipe and retract
G1 X102.664 Y100.943 E-0.07827 ; wipe and retract
G1 X102.441 Y101.198 E-0.08954 ; wipe and retract
G1 X101.867 Y101.662 E-0.19474 ; wipe and retract
G1 X101.473 Y102.081 E-0.15180 ; wipe and retract
G1 X101.058 Y102.622 E-0.17975 ; wipe and retract
G1 X100.927 Y102.823 E-0.06329 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X95.718 Y108.496 ; move to first perimeter point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.809 Y108.599 E0.00465 ; perimeter
G1 X95.443 Y108.805 E0.01419 ; perimeter
G1 X95.184 Y109.057 E0.01223 ; perimeter
G1 X95.228 Y108.921 E0.00484 ; perimeter
G1 X95.352 Y108.734 E0.00760 ; perimeter
G1 X95.502 Y108.579 E0.00730 ; perimeter
G1 X95.662 Y108.517 E0.00581 ; perimeter
G1 X96.429 Y108.582 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.426 Y108.662 E0.00374 ; perimeter
G1 X96.379 Y108.703 E0.00288 ; perimeter
G1 X96.307 Y108.827 E0.00665 ; perimeter
G1 X96.082 Y108.999 E0.01309 ; perimeter
G1 X95.734 Y109.194 E0.01851 ; perimeter
G1 X95.403 Y109.516 E0.02140 ; perimeter
G1 X95.182 Y110.258 E0.03584 ; perimeter
G1 X94.998 Y111.087 E0.03934 ; perimeter
G1 X94.919 Y111.683 E0.02785 ; perimeter
G1 X94.947 Y111.795 E0.00535 ; perimeter
G1 X94.921 Y112.410 E0.02850 ; perimeter
G1 X94.864 Y112.549 E0.00699 ; perimeter
G1 X94.738 Y112.751 E0.01102 ; perimeter
G1 X94.604 Y112.824 E0.00707 ; perimeter
G1 X94.497 Y112.805 E0.00499 ; perimeter
G1 X94.347 Y112.692 E0.00871 ; perimeter
G1 X94.175 Y112.433 E0.01440 ; perimeter
G1 X94.116 Y112.200 E0.01112 ; perimeter
G1 X94.119 Y111.842 E0.01659 ; perimeter
G1 X94.263 Y110.900 E0.04414 ; perimeter
G1 X94.442 Y110.059 E0.03984 ; perimeter
G1 X94.647 Y109.150 E0.04315 ; perimeter
G1 X94.790 Y108.709 E0.02148 ; perimeter
G1 X94.975 Y108.430 E0.01550 ; perimeter
G1 X95.185 Y108.213 E0.01402 ; perimeter
G1 X95.270 Y108.151 E0.00485 ; perimeter
G1 X95.479 Y108.071 E0.01034 ; perimeter
G1 X95.652 Y107.936 E0.01018 ; perimeter
G1 X95.887 Y107.861 E0.01142 ; perimeter
G1 X95.914 Y107.829 E0.00194 ; perimeter
G1 X96.051 Y108.066 E0.01269 ; perimeter
G1 X96.072 Y108.168 E0.00481 ; perimeter
G1 X96.260 Y108.384 E0.01327 ; perimeter
G1 X96.300 Y108.464 E0.00416 ; perimeter
G1 X96.385 Y108.541 E0.00530 ; perimeter
G1 X96.369 Y108.636 F10800.000 ; move inwards before travel
G1 X95.048 Y109.256 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.377977
G1 F2400.000
G1 X94.932 Y109.698 E0.01274 ; infill
;WIDTH:0.352842
G1 X94.816 Y110.141 E0.01179 ; infill
;WIDTH:0.327707
G1 X94.636 Y110.968 E0.02005 ; infill
;WIDTH:0.319088
G1 X94.532 Y111.679 E0.01649 ; infill
G1 X94.496 Y112.480 E0.01843 ; infill
G1 X94.566 Y112.555 F10800.000 ; move to first infill point
;WIDTH:0.376474
G1 F2400.000
G1 X94.524 Y112.151 E0.01129 ; infill
;WIDTH:0.385503
G1 X94.535 Y111.838 E0.00892 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.524 Y112.151 E-0.08262 ; wipe and retract
;WIPE_END
G1 E-2.31738 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X97.111 Y106.207 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.299961
G1 F2400.000
G1 X97.317 Y106.041 E0.00565 ; infill
;WIDTH:0.317786
G1 X97.362 Y105.992 E0.00152 ; infill
;WIDTH:0.337023
G1 X97.488 Y105.824 E0.00514 ; infill
;WIDTH:0.349516
G1 X97.844 Y105.517 E0.01199 ; infill
G1 X98.266 Y105.130 F10800.000 ; move to first infill point
;WIDTH:0.368358
G1 F2400.000
G1 X98.458 Y104.866 E0.00885 ; infill
G1 X98.716 Y104.583 E0.01037 ; infill
;WIDTH:0.382577
G1 X99.118 Y104.160 E0.01648 ; infill
;WIDTH:0.287464
G1 X99.428 Y103.835 E0.00913 ; infill
;WIDTH:0.153377
G1 X99.636 Y103.630 E0.00268 ; infill
;WIDTH:0.191608
G1 X99.783 Y103.482 E0.00258 ; infill
;WIDTH:0.229837
G1 X99.930 Y103.334 E0.00324 ; infill
;WIDTH:0.237528
G1 X99.948 Y103.317 E0.00040 ; infill
;WIDTH:0.246389
G1 X99.963 Y103.306 E0.00032 ; infill
G1 X100.146 Y103.145 F10800.000 ; move to first infill point
;WIDTH:0.382661
G1 F2400.000
G1 X100.448 Y102.803 E0.01288 ; infill
G1 X100.685 Y102.485 E0.01121 ; infill
;WIDTH:0.263941
G1 X101.209 Y101.849 E0.01514 ; infill
;WIDTH:0.287164
G1 X101.489 Y101.533 E0.00858 ; infill
;WIDTH:0.313803
G1 X101.617 Y101.379 E0.00451 ; infill
;WIDTH:0.351431
G1 X101.716 Y101.276 E0.00366 ; infill
;WIDTH:0.389059
G1 X101.814 Y101.172 E0.00411 ; infill
;WIDTH:0.424299
G1 X102.633 Y100.409 E0.03551 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.814 Y101.172 E-0.29546 ; wipe and retract
;WIPE_END
G1 E-2.10454 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X104.283 Y98.988 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.360536
G1 F2400.000
G1 X104.483 Y98.841 E0.00656 ; infill
;WIDTH:0.371685
G1 X104.524 Y98.817 E0.00128 ; infill
;WIDTH:0.378967
G1 X104.544 Y98.806 E0.00066 ; infill
;WIDTH:0.419796
G1 X104.641 Y98.758 E0.00339 ; infill
;WIDTH:0.461914
G1 X104.847 Y98.655 E0.00802 ; infill
;WIDTH:0.356489
G1 X105.156 Y98.467 E0.00943 ; infill
;WIDTH:0.252502
G1 X105.365 Y98.275 E0.00494 ; infill
G1 X105.534 Y98.158 E0.00358 ; infill
;WIDTH:0.261842
G1 X105.564 Y98.134 E0.00071 ; infill
G1 X105.823 Y97.881 F10800.000 ; move to first infill point
;WIDTH:0.360195
G1 F2400.000
G1 X106.106 Y97.641 E0.00977 ; infill
G1 X106.511 Y97.246 E0.01492 ; infill
;WIDTH:0.261002
G1 X106.757 Y96.976 E0.00664 ; infill
G1 X107.401 Y96.448 E0.01510 ; infill
G1 X106.922 Y96.662 F10800.000 ; move to first infill point
;WIDTH:0.203488
G1 F2400.000
G1 X107.876 Y96.559 E0.01281 ; infill
G1 X107.849 Y96.595 F10800.000 ; move to first infill point
;WIDTH:0.421938
G1 F2400.000
G1 X106.857 Y96.728 E0.03153 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.849 Y96.595 E-0.26398 ; wipe and retract
;WIPE_END
G1 E-2.13602 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 X109.646 Y95.534 ; move to first infill point
G1 Z2.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.42735
G1 F2400.000
G1 X109.462 Y95.693 E0.00777 ; infill
G1 X109.418 Y95.957 F10800.000 ; move to first infill point
;WIDTH:0.218775
G1 F2400.000
G1 X109.846 Y95.327 E0.01113 ; infill
G1 X109.953 Y95.197 E0.00247 ; infill
;LAYER_CHANGE
;Z:2.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.846 Y95.327 E-0.04456 ; wipe and retract
G1 X109.418 Y95.957 E-0.20086 ; wipe and retract
;WIPE_END
G1 E-2.15458 F2400.000 ; retract
G1 Z2.475 F10800.000 ; lift Z
G1 Z2.600 ; move to next layer (12)
;AFTER_LAYER_CHANGE
;2.6
G1 Z2.675 ; lift Z
G1 X104.783 Y115.683 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.882 Y115.695 E0.00461 ; perimeter
G1 X104.721 Y115.737 E0.00768 ; perimeter
G1 X104.618 Y115.814 E0.00596 ; perimeter
G1 X104.334 Y115.927 E0.01417 ; perimeter
G1 X104.159 Y115.969 E0.00832 ; perimeter
G1 X103.921 Y116.091 E0.01242 ; perimeter
G1 X103.625 Y116.140 E0.01388 ; perimeter
G1 X103.325 Y116.127 E0.01395 ; perimeter
G1 X102.876 Y115.990 E0.02172 ; perimeter
G1 X102.813 Y115.883 E0.00576 ; perimeter
G1 X102.361 Y115.820 E0.02111 ; perimeter
G1 X99.763 Y115.686 E0.12050 ; perimeter
G1 X101.065 Y115.644 E0.06032 ; perimeter
G1 X102.272 Y115.547 E0.05610 ; perimeter
G1 X102.737 Y115.531 E0.02156 ; perimeter
G1 X103.251 Y115.357 E0.02510 ; perimeter
G1 X103.552 Y115.329 E0.01403 ; perimeter
G1 X103.903 Y115.377 E0.01641 ; perimeter
G1 X104.184 Y115.453 E0.01345 ; perimeter
G1 X104.300 Y115.518 E0.00617 ; perimeter
G1 X104.728 Y115.659 E0.02088 ; perimeter
G1 X104.814 Y115.778 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.882 Y115.695 E-0.04163 ; wipe and retract
G1 X104.721 Y115.737 E-0.04373 ; wipe and retract
G1 X104.618 Y115.814 E-0.03393 ; wipe and retract
G1 X104.334 Y115.927 E-0.08072 ; wipe and retract
G1 X104.159 Y115.969 E-0.04738 ; wipe and retract
G1 X103.921 Y116.091 E-0.07077 ; wipe and retract
G1 X103.625 Y116.140 E-0.07907 ; wipe and retract
G1 X103.325 Y116.127 E-0.07946 ; wipe and retract
G1 X102.876 Y115.990 E-0.12375 ; wipe and retract
G1 X102.813 Y115.883 E-0.03280 ; wipe and retract
G1 X102.361 Y115.820 E-0.12026 ; wipe and retract
G1 X99.763 Y115.686 E-0.68649 ; wipe and retract
G1 X101.065 Y115.644 E-0.34363 ; wipe and retract
G1 X102.272 Y115.547 E-0.31962 ; wipe and retract
G1 X102.737 Y115.531 E-0.12284 ; wipe and retract
G1 X102.931 Y115.465 E-0.05391 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X97.202 Y115.704 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X96.903 Y115.787 E0.01437 ; perimeter
G1 X96.733 Y115.923 E0.01009 ; perimeter
G1 X96.561 Y115.971 E0.00829 ; perimeter
G1 X96.416 Y116.051 E0.00766 ; perimeter
G1 X95.893 Y116.079 E0.02424 ; perimeter
G1 X95.669 Y116.000 E0.01100 ; perimeter
G1 X95.569 Y115.902 E0.00651 ; perimeter
G1 X95.505 Y115.754 E0.00749 ; perimeter
G1 X95.512 Y115.572 E0.00842 ; perimeter
G1 X95.654 Y115.423 E0.00955 ; perimeter
G1 X95.836 Y115.340 E0.00927 ; perimeter
G1 X96.212 Y115.293 E0.01752 ; perimeter
G1 X96.534 Y115.372 E0.01537 ; perimeter
G1 X96.751 Y115.531 E0.01247 ; perimeter
G1 X96.945 Y115.566 E0.00914 ; perimeter
G1 X97.176 Y115.650 E0.01139 ; perimeter
G1 X96.893 Y115.722 F10800.000 ; move inwards before travel
G1 X96.577 Y115.703 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.182274
G1 F2400.000
G1 X95.778 Y115.642 E0.00928 ; infill
G1 X95.900 Y115.706 F10800.000 ; move to first infill point
;WIDTH:0.304724
G1 F2400.000
G1 X96.196 Y115.684 E0.00646 ; infill
G1 X96.553 Y115.723 E0.00782 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.196 Y115.684 E-0.09485 ; wipe and retract
G1 X95.900 Y115.706 E-0.07836 ; wipe and retract
;WIPE_END
G1 E-2.22679 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X102.998 Y115.697 ; move to first infill point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.299928
G1 F2400.000
G1 X103.392 Y115.738 E0.00845 ; infill
G1 X103.601 Y115.739 E0.00448 ; infill
G1 X103.803 Y115.736 E0.00432 ; infill
G1 X104.104 Y115.685 E0.00652 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.803 Y115.736 E-0.08049 ; wipe and retract
G1 X103.601 Y115.739 E-0.05334 ; wipe and retract
G1 X103.392 Y115.738 E-0.05533 ; wipe and retract
G1 X102.998 Y115.697 E-0.10437 ; wipe and retract
;WIPE_END
G1 E-2.10647 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X95.626 Y108.508 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.551 Y108.590 E0.00375 ; perimeter
G1 X95.365 Y108.695 E0.00723 ; perimeter
G1 X95.460 Y108.549 E0.00589 ; perimeter
G1 X95.688 Y108.310 E0.01117 ; perimeter
G1 X95.696 Y108.375 E0.00223 ; perimeter
G1 X95.660 Y108.459 E0.00307 ; perimeter
G1 X95.632 Y109.098 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.480 Y109.348 E0.01355 ; perimeter
G1 X95.332 Y109.481 E0.00921 ; perimeter
G1 X94.943 Y111.426 E0.09189 ; perimeter
G1 X94.898 Y112.245 E0.03801 ; perimeter
G1 X94.850 Y112.298 E0.00329 ; perimeter
G1 X94.764 Y112.483 E0.00948 ; perimeter
G1 X94.587 Y112.611 E0.01011 ; perimeter
G1 X94.471 Y112.608 E0.00538 ; perimeter
G1 X94.258 Y112.486 E0.01138 ; perimeter
G1 X94.153 Y112.354 E0.00777 ; perimeter
G1 X94.108 Y112.189 E0.00794 ; perimeter
G1 X94.116 Y111.644 E0.02524 ; perimeter
G1 X94.214 Y111.080 E0.02654 ; perimeter
G1 X94.297 Y110.832 E0.01209 ; perimeter
G1 X94.432 Y110.146 E0.03241 ; perimeter
G1 X94.686 Y109.111 E0.04934 ; perimeter
G1 X94.872 Y108.568 E0.02660 ; perimeter
G1 X95.080 Y108.248 E0.01768 ; perimeter
G1 X95.377 Y107.938 E0.01987 ; perimeter
G1 X95.709 Y107.678 E0.01956 ; perimeter
G1 X95.993 Y107.364 E0.01961 ; perimeter
G1 X96.742 Y106.173 E0.06516 ; perimeter
G1 X97.052 Y105.735 E0.02487 ; perimeter
G1 X97.281 Y105.526 E0.01433 ; perimeter
G1 X97.521 Y105.353 E0.01374 ; perimeter
G1 X97.910 Y104.921 E0.02691 ; perimeter
G1 X98.212 Y104.530 E0.02287 ; perimeter
G1 X98.731 Y103.994 E0.03458 ; perimeter
G1 X99.025 Y103.778 E0.01690 ; perimeter
G1 X99.204 Y103.706 E0.00893 ; perimeter
G1 X99.477 Y103.521 E0.01528 ; perimeter
G1 X99.734 Y103.194 E0.01927 ; perimeter
G1 X99.805 Y103.002 E0.00949 ; perimeter
G1 X100.015 Y102.674 E0.01800 ; perimeter
G1 X100.980 Y101.547 E0.06872 ; perimeter
G1 X101.215 Y101.224 E0.01853 ; perimeter
G1 X101.637 Y100.784 E0.02824 ; perimeter
G1 X101.758 Y100.662 E0.00795 ; perimeter
G1 X102.185 Y100.360 E0.02423 ; perimeter
G1 X102.568 Y100.240 E0.01858 ; perimeter
G1 X102.816 Y100.271 E0.01157 ; perimeter
G1 X102.857 Y100.372 E0.00505 ; perimeter
G1 X102.849 Y100.557 E0.00856 ; perimeter
G1 X102.867 Y100.665 E0.00509 ; perimeter
G1 X102.787 Y100.908 E0.01182 ; perimeter
G1 X102.544 Y101.173 E0.01666 ; perimeter
G1 X102.012 Y101.603 E0.03171 ; perimeter
G1 X101.925 Y101.647 E0.00448 ; perimeter
G1 X101.487 Y102.091 E0.02894 ; perimeter
G1 X101.059 Y102.646 E0.03245 ; perimeter
G1 X100.726 Y103.185 E0.02934 ; perimeter
G1 X100.545 Y103.425 E0.01391 ; perimeter
G1 X100.382 Y103.528 E0.00895 ; perimeter
G1 X100.049 Y103.649 E0.01642 ; perimeter
G1 X99.762 Y103.903 E0.01772 ; perimeter
G1 X99.601 Y104.130 E0.01289 ; perimeter
G1 X99.455 Y104.413 E0.01475 ; perimeter
G1 X99.257 Y104.693 E0.01588 ; perimeter
G1 X99.149 Y104.800 E0.00707 ; perimeter
G1 X98.827 Y105.050 E0.01886 ; perimeter
G1 X98.782 Y105.117 E0.00377 ; perimeter
G1 X98.489 Y105.324 E0.01658 ; perimeter
G1 X98.161 Y105.665 E0.02193 ; perimeter
G1 X97.908 Y105.998 E0.01937 ; perimeter
G1 X97.821 Y106.065 E0.00508 ; perimeter
G1 X97.608 Y106.324 E0.01555 ; perimeter
G1 X97.114 Y106.817 E0.03233 ; perimeter
G1 X96.816 Y107.084 E0.01849 ; perimeter
G1 X96.468 Y107.474 E0.02422 ; perimeter
G1 X96.152 Y107.748 E0.01936 ; perimeter
G1 X96.217 Y107.909 E0.00805 ; perimeter
G1 X96.147 Y108.099 E0.00936 ; perimeter
G1 X96.185 Y108.402 E0.01414 ; perimeter
G1 X96.134 Y108.620 E0.01040 ; perimeter
G1 X96.005 Y108.809 E0.01057 ; perimeter
G1 X95.854 Y108.973 E0.01031 ; perimeter
G1 X95.684 Y109.068 E0.00905 ; perimeter
G1 X95.342 Y109.056 F10800.000 ; move inwards before travel
G1 X95.237 Y108.910 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.295332
G1 F2400.000
G1 X94.998 Y109.333 E0.01018 ; infill
;WIDTH:0.311551
G1 X94.658 Y110.936 E0.03662 ; infill
;WIDTH:0.336614
G1 X94.555 Y111.393 E0.01142 ; infill
G1 X94.494 Y112.170 E0.01904 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.555 Y111.393 E-0.20575 ; wipe and retract
G1 X94.658 Y110.936 E-0.12343 ; wipe and retract
;WIPE_END
G1 E-2.07082 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X95.911 Y107.984 ; move to first infill point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.11784
G1 F2400.000
G1 X95.919 Y107.913 E0.00044 ; infill
G1 X95.897 Y107.830 E0.00054 ; infill
G1 X96.540 Y106.995 F10800.000 ; move to first infill point
;WIDTH:0.115393
G1 F2400.000
G1 X96.621 Y106.886 E0.00082 ; infill
;WIDTH:0.153172
G1 X96.709 Y106.782 E0.00125 ; infill
;WIDTH:0.19095
G1 X96.797 Y106.679 E0.00167 ; infill
;WIDTH:0.228729
G1 X96.884 Y106.575 E0.00210 ; infill
;WIDTH:0.257439
G1 X96.964 Y106.475 E0.00228 ; infill
;WIDTH:0.286149
G1 X97.044 Y106.375 E0.00259 ; infill
;WIDTH:0.321569
G1 X97.178 Y106.216 E0.00483 ; infill
;WIDTH:0.361961
G1 X97.523 Y105.824 E0.01384 ; infill
;WIDTH:0.246005
G1 X97.749 Y105.624 E0.00509 ; infill
G1 X97.905 Y105.438 E0.00410 ; infill
;WIDTH:0.258423
G1 X98.181 Y105.142 E0.00725 ; infill
;WIDTH:0.274168
G1 X98.265 Y105.046 E0.00245 ; infill
;WIDTH:0.32027
G1 X98.377 Y104.938 E0.00358 ; infill
;WIDTH:0.36334
G1 X98.551 Y104.757 E0.00670 ; infill
;WIDTH:0.392298
G1 X98.707 Y104.617 E0.00611 ; infill
;WIDTH:0.404091
G1 X98.864 Y104.476 E0.00631 ; infill
G1 X99.490 Y103.825 E0.02714 ; infill
G1 X100.719 Y102.737 F10800.000 ; move to first infill point
;WIDTH:0.38811
G1 F2400.000
G1 X99.855 Y103.430 E0.03180 ; infill
G1 X100.049 Y103.393 F10800.000 ; move to first infill point
;WIDTH:0.435103
G1 F2400.000
G1 X100.551 Y102.683 E0.02834 ; infill
;WIDTH:0.306422
G1 X100.744 Y102.419 E0.00717 ; infill
G1 X101.276 Y101.775 E0.01831 ; infill
;WIDTH:0.334984
G1 X101.400 Y101.628 E0.00466 ; infill
;WIDTH:0.366488
G1 X101.667 Y101.335 E0.01066 ; infill
;WIDTH:0.376127
G1 X101.707 Y101.300 E0.00149 ; infill
;WIDTH:0.407446
G1 X101.781 Y101.245 E0.00279 ; infill
;WIDTH:0.434505
G1 X102.609 Y100.532 E0.03559 ; infill
G1 X102.596 Y100.490 F10800.000 ; move to first infill point
;WIDTH:0.195532
G1 F2400.000
G1 X102.089 Y101.231 E0.01139 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.596 Y100.490 E-0.23691 ; wipe and retract
;WIPE_END
G1 E-2.16309 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X109.308 Y95.880 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.507 Y95.739 E0.00826 ; perimeter
G1 X109.561 Y95.724 E0.00190 ; perimeter
G1 X109.534 Y95.817 E0.00328 ; perimeter
G1 X109.366 Y95.864 E0.00591 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.507 Y95.739 E-0.04982 ; wipe and retract
G1 X109.561 Y95.724 E-0.01478 ; wipe and retract
G1 X109.534 Y95.817 E-0.02560 ; wipe and retract
G1 X109.366 Y95.864 E-0.04609 ; wipe and retract
;WIPE_END
G1 E-2.26370 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X106.957 Y97.242 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.448 Y97.932 E0.03972 ; perimeter
G1 X106.304 Y98.083 E0.00968 ; perimeter
G1 X105.799 Y98.498 E0.03027 ; perimeter
G1 X105.359 Y98.904 E0.02773 ; perimeter
G1 X104.991 Y99.139 E0.02021 ; perimeter
G1 X104.635 Y99.248 E0.01727 ; perimeter
G1 X104.485 Y99.220 E0.00707 ; perimeter
G1 X104.149 Y99.055 E0.01733 ; perimeter
G1 X104.106 Y98.955 E0.00504 ; perimeter
G1 X104.206 Y98.744 E0.01081 ; perimeter
G1 X104.333 Y98.549 E0.01078 ; perimeter
G1 X104.592 Y98.336 E0.01551 ; perimeter
G1 X105.114 Y98.100 E0.02656 ; perimeter
G1 X105.435 Y97.804 E0.02023 ; perimeter
G1 X105.497 Y97.702 E0.00550 ; perimeter
G1 X105.716 Y97.486 E0.01427 ; perimeter
G1 X106.121 Y97.163 E0.02399 ; perimeter
G1 X107.005 Y96.391 E0.05438 ; perimeter
G1 X107.210 Y96.262 E0.01121 ; perimeter
G1 X107.501 Y96.210 E0.01371 ; perimeter
G1 X108.063 Y96.235 E0.02605 ; perimeter
G1 X108.290 Y96.113 E0.01194 ; perimeter
G1 X108.502 Y96.049 E0.01025 ; perimeter
G1 X108.576 Y95.916 E0.00704 ; perimeter
G1 X108.828 Y95.683 E0.01592 ; perimeter
G1 X108.948 Y95.545 E0.00847 ; perimeter
G1 X109.298 Y95.295 E0.01993 ; perimeter
G1 X109.433 Y95.260 E0.00642 ; perimeter
G1 X109.675 Y95.156 E0.01223 ; perimeter
G1 X109.953 Y95.129 E0.01291 ; perimeter
G1 X110.021 Y95.153 E0.00335 ; perimeter
G1 X110.072 Y95.449 E0.01391 ; perimeter
G1 X110.064 Y95.719 E0.01251 ; perimeter
G1 X109.964 Y96.068 E0.01680 ; perimeter
G1 X109.846 Y96.204 E0.00835 ; perimeter
G1 X109.727 Y96.264 E0.00615 ; perimeter
G1 X109.295 Y96.384 E0.02080 ; perimeter
G1 X109.084 Y96.421 E0.00992 ; perimeter
G1 X108.838 Y96.536 E0.01256 ; perimeter
G1 X108.400 Y96.681 E0.02135 ; perimeter
G1 X108.292 Y96.780 E0.00678 ; perimeter
G1 X107.877 Y97.023 E0.02231 ; perimeter
G1 X107.016 Y97.228 E0.04100 ; perimeter
G1 X106.577 Y97.119 F10800.000 ; move inwards before travel
G1 X106.802 Y96.969 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.164316
G1 F2400.000
G1 X106.494 Y97.292 E0.00450 ; infill
;WIDTH:0.290645
G1 X106.137 Y97.670 E0.01071 ; infill
;WIDTH:0.394125
G1 X105.818 Y97.956 E0.01251 ; infill
;WIDTH:0.373691
G1 X105.750 Y98.034 E0.00285 ; infill
;WIDTH:0.338773
G1 X105.721 Y98.064 E0.00102 ; infill
;WIDTH:0.330583
G1 X105.553 Y98.210 E0.00533 ; infill
;WIDTH:0.318361
G1 X105.342 Y98.405 E0.00658 ; infill
G1 X105.101 Y98.569 E0.00668 ; infill
;WIDTH:0.448738
G1 X104.722 Y98.778 E0.01461 ; infill
;WIDTH:0.408506
G1 X104.639 Y98.823 E0.00285 ; infill
;WIDTH:0.371936
G1 X104.608 Y98.837 E0.00093 ; infill
;WIDTH:0.335562
G1 X104.584 Y98.846 E0.00062 ; infill
;WIDTH:0.30541
G1 X104.553 Y98.859 E0.00075 ; infill
;WIDTH:0.267729
G1 X104.544 Y98.897 E0.00072 ; infill
;WIDTH:0.234049
G1 X104.536 Y98.935 E0.00061 ; infill
;WIDTH:0.200369
G1 X104.527 Y98.972 E0.00050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.536 Y98.935 E-0.01018 ; wipe and retract
;WIPE_END
G1 E-2.38982 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X106.722 Y96.958 ; move to first infill point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.442759
G1 F2400.000
G1 X107.377 Y96.684 E0.02360 ; infill
G1 X107.530 Y96.652 E0.00517 ; infill
G1 X108.126 Y96.596 E0.01993 ; infill
G1 X108.116 Y96.536 F10800.000 ; move to first infill point
;WIDTH:0.108877
G1 F2400.000
G1 X108.265 Y96.437 E0.00098 ; infill
;WIDTH:0.139187
G1 X108.707 Y96.275 E0.00377 ; infill
;WIDTH:0.158595
G1 X109.082 Y95.966 E0.00467 ; infill
G1 X109.172 Y96.154 F10800.000 ; move to first infill point
;WIDTH:0.313518
G1 F2400.000
G1 X108.976 Y96.059 E0.00489 ; infill
G1 X108.955 Y96.071 E0.00055 ; infill
;WIDTH:0.303849
G1 X108.451 Y96.410 E0.01317 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.955 Y96.071 E-0.16024 ; wipe and retract
;WIPE_END
G1 E-2.23976 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X112.630 Y94.644 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.749 Y94.600 E0.00430 ; perimeter
G1 X112.678 Y94.715 E0.00458 ; perimeter
G1 X112.663 Y94.694 E0.00087 ; perimeter
G1 X113.936 Y94.376 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.135 Y94.352 E0.00678 ; perimeter
G1 X114.298 Y94.356 E0.00553 ; perimeter
G1 X114.326 Y94.526 E0.00583 ; perimeter
G1 X114.316 Y94.565 E0.00136 ; perimeter
G1 X113.991 Y94.400 E0.01234 ; perimeter
G1 X113.383 Y94.732 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.129 Y94.901 E0.01413 ; perimeter
G1 X112.970 Y95.144 E0.01347 ; perimeter
G1 X112.848 Y95.196 E0.00615 ; perimeter
G1 X112.736 Y95.288 E0.00672 ; perimeter
G1 X112.542 Y95.280 E0.00901 ; perimeter
G1 X112.355 Y95.168 E0.01008 ; perimeter
G1 X112.232 Y95.005 E0.00945 ; perimeter
G1 X112.225 Y94.906 E0.00459 ; perimeter
G1 X112.119 Y94.751 E0.00871 ; perimeter
G1 X112.085 Y94.508 E0.01134 ; perimeter
G1 X112.150 Y94.348 E0.00803 ; perimeter
G1 X112.539 Y94.150 E0.02024 ; perimeter
G1 X113.748 Y93.913 E0.05705 ; perimeter
G1 X114.112 Y93.869 E0.01699 ; perimeter
G1 X114.534 Y93.883 E0.01956 ; perimeter
G1 X114.693 Y94.010 E0.00944 ; perimeter
G1 X114.779 Y94.278 E0.01305 ; perimeter
G1 X114.816 Y94.555 E0.01293 ; perimeter
G1 X114.738 Y94.861 E0.01461 ; perimeter
G1 X114.623 Y95.040 E0.00989 ; perimeter
G1 X114.435 Y95.112 E0.00932 ; perimeter
G1 X114.210 Y95.052 E0.01079 ; perimeter
G1 X113.625 Y94.766 E0.03017 ; perimeter
G1 X113.443 Y94.740 E0.00852 ; perimeter
G1 X113.166 Y94.518 F10800.000 ; move inwards before travel
G1 X113.519 Y94.356 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350011
G1 F2400.000
G1 X113.696 Y94.351 E0.00451 ; infill
G1 X113.519 Y94.356 F10800.000 ; move to first infill point
;WIDTH:0.317434
G1 F2400.000
G1 X113.343 Y94.361 E0.00403 ; infill
;WIDTH:0.284858
G1 X113.315 Y94.363 E0.00057 ; infill
G1 X113.043 Y94.581 E0.00702 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.315 Y94.363 E-0.09205 ; wipe and retract
G1 X113.343 Y94.361 E-0.00742 ; wipe and retract
;WIPE_END
G1 E-2.30053 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X115.609 Y100.089 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.409 Y100.156 E0.00978 ; perimeter
G1 X115.212 Y100.086 E0.00967 ; perimeter
G1 X115.063 Y99.886 E0.01159 ; perimeter
G1 X114.994 Y99.658 E0.01100 ; perimeter
G1 X114.987 Y99.447 E0.00981 ; perimeter
G1 X115.034 Y99.221 E0.01069 ; perimeter
G1 X115.179 Y99.023 E0.01135 ; perimeter
G1 X115.356 Y98.938 E0.00909 ; perimeter
G1 X115.481 Y99.001 E0.00649 ; perimeter
G1 X115.550 Y99.069 E0.00450 ; perimeter
G1 X115.621 Y99.183 E0.00620 ; perimeter
G1 X115.774 Y99.349 E0.01046 ; perimeter
G1 X115.803 Y99.449 E0.00480 ; perimeter
G1 X115.810 Y99.694 E0.01136 ; perimeter
G1 X115.753 Y99.865 E0.00838 ; perimeter
G1 X115.688 Y99.935 E0.00440 ; perimeter
G1 X115.637 Y100.035 E0.00523 ; perimeter
G1 X115.424 Y99.988 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.409 Y100.156 E-0.06792 ; wipe and retract
G1 X115.212 Y100.086 E-0.05510 ; wipe and retract
G1 X115.063 Y99.886 E-0.06605 ; wipe and retract
G1 X114.994 Y99.658 E-0.06265 ; wipe and retract
G1 X114.987 Y99.447 E-0.05591 ; wipe and retract
G1 X115.034 Y99.221 E-0.06092 ; wipe and retract
G1 X115.179 Y99.023 E-0.06465 ; wipe and retract
G1 X115.356 Y98.938 E-0.05178 ; wipe and retract
G1 X115.481 Y99.001 E-0.03696 ; wipe and retract
G1 X115.550 Y99.069 E-0.02566 ; wipe and retract
G1 X115.621 Y99.183 E-0.03534 ; wipe and retract
G1 X115.774 Y99.349 E-0.05958 ; wipe and retract
G1 X115.803 Y99.449 E-0.02735 ; wipe and retract
G1 X115.810 Y99.694 E-0.06470 ; wipe and retract
G1 X115.753 Y99.865 E-0.04772 ; wipe and retract
G1 X115.688 Y99.935 E-0.02508 ; wipe and retract
G1 X115.637 Y100.035 E-0.02977 ; wipe and retract
;WIPE_END
G1 E-1.56286 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X115.058 Y111.130 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.136 Y110.988 E0.00747 ; perimeter
G1 X115.355 Y110.751 E0.01497 ; perimeter
G1 X115.496 Y110.744 E0.00654 ; perimeter
G1 X115.642 Y110.846 E0.00822 ; perimeter
G1 X115.780 Y110.994 E0.00939 ; perimeter
G1 X115.864 Y111.415 E0.01986 ; perimeter
G1 X115.852 Y111.566 E0.00702 ; perimeter
G1 X115.775 Y111.768 E0.01001 ; perimeter
G1 X115.594 Y111.977 E0.01283 ; perimeter
G1 X115.498 Y112.137 E0.00865 ; perimeter
G1 X115.378 Y112.183 E0.00595 ; perimeter
G1 X115.298 Y112.102 E0.00528 ; perimeter
G1 X115.250 Y111.962 E0.00683 ; perimeter
G1 X115.133 Y111.802 E0.00921 ; perimeter
G1 X115.068 Y111.654 E0.00748 ; perimeter
G1 X115.039 Y111.326 E0.01524 ; perimeter
G1 X115.052 Y111.189 E0.00636 ; perimeter
G1 X115.216 Y111.099 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.136 Y110.988 E-0.05745 ; wipe and retract
G1 X115.355 Y110.751 E-0.08529 ; wipe and retract
G1 X115.496 Y110.744 E-0.03723 ; wipe and retract
G1 X115.642 Y110.846 E-0.04683 ; wipe and retract
G1 X115.780 Y110.994 E-0.05348 ; wipe and retract
G1 X115.864 Y111.415 E-0.11312 ; wipe and retract
G1 X115.852 Y111.566 E-0.04002 ; wipe and retract
G1 X115.775 Y111.768 E-0.05704 ; wipe and retract
G1 X115.594 Y111.977 E-0.07307 ; wipe and retract
G1 X115.498 Y112.137 E-0.04926 ; wipe and retract
G1 X115.378 Y112.183 E-0.03391 ; wipe and retract
G1 X115.298 Y112.102 E-0.03008 ; wipe and retract
G1 X115.250 Y111.962 E-0.03890 ; wipe and retract
G1 X115.133 Y111.802 E-0.05248 ; wipe and retract
G1 X115.068 Y111.654 E-0.04263 ; wipe and retract
G1 X115.039 Y111.326 E-0.08684 ; wipe and retract
G1 X115.052 Y111.189 E-0.03621 ; wipe and retract
;WIPE_END
G1 E-1.46617 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X115.225 Y114.496 ; move to first perimeter point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.302 Y114.613 E0.00647 ; perimeter
G1 X115.324 Y114.857 E0.01136 ; perimeter
G1 X115.400 Y114.987 E0.00696 ; perimeter
G1 X115.452 Y115.288 E0.01417 ; perimeter
G1 X115.445 Y115.406 E0.00547 ; perimeter
G1 X115.401 Y115.546 E0.00679 ; perimeter
G1 X115.311 Y115.705 E0.00844 ; perimeter
G1 X115.210 Y115.771 E0.00562 ; perimeter
G1 X114.951 Y115.812 E0.01211 ; perimeter
G1 X114.685 Y115.772 E0.01248 ; perimeter
G1 X114.614 Y115.717 E0.00417 ; perimeter
G1 X114.295 Y115.632 E0.01528 ; perimeter
G1 X114.189 Y115.480 E0.00859 ; perimeter
G1 X113.978 Y115.460 E0.00982 ; perimeter
G1 X113.973 Y115.436 E0.00113 ; perimeter
G1 X114.335 Y115.277 E0.01835 ; perimeter
G1 X114.742 Y114.934 E0.02463 ; perimeter
G1 X114.894 Y114.740 E0.01143 ; perimeter
G1 X114.961 Y114.711 E0.00339 ; perimeter
G1 X115.223 Y114.316 E0.02197 ; perimeter
G1 X115.224 Y114.436 E0.00560 ; perimeter
G1 X115.238 Y114.635 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.302 Y114.613 E-0.05086 ; wipe and retract
G1 X115.324 Y114.857 E-0.06473 ; wipe and retract
G1 X115.400 Y114.987 E-0.03967 ; wipe and retract
G1 X115.452 Y115.288 E-0.08073 ; wipe and retract
G1 X115.445 Y115.406 E-0.03119 ; wipe and retract
G1 X115.401 Y115.546 E-0.03870 ; wipe and retract
G1 X115.311 Y115.705 E-0.04807 ; wipe and retract
G1 X115.210 Y115.771 E-0.03199 ; wipe and retract
G1 X114.951 Y115.812 E-0.06900 ; wipe and retract
G1 X114.685 Y115.772 E-0.07108 ; wipe and retract
G1 X114.614 Y115.717 E-0.02377 ; wipe and retract
G1 X114.295 Y115.632 E-0.08705 ; wipe and retract
G1 X114.189 Y115.480 E-0.04894 ; wipe and retract
G1 X113.978 Y115.460 E-0.05592 ; wipe and retract
G1 X113.973 Y115.436 E-0.00646 ; wipe and retract
G1 X114.335 Y115.277 E-0.10452 ; wipe and retract
G1 X114.742 Y114.934 E-0.14031 ; wipe and retract
G1 X114.894 Y114.740 E-0.06511 ; wipe and retract
G1 X114.961 Y114.711 E-0.01932 ; wipe and retract
G1 X115.223 Y114.316 E-0.12519 ; wipe and retract
G1 X115.224 Y114.436 E-0.03188 ; wipe and retract
;WIPE_END
G1 E-1.16552 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 X115.450 Y111.775 ; move to first infill point
G1 Z2.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.328363
G1 F2400.000
G1 X115.432 Y111.028 E0.01773 ; infill
G1 X115.492 Y111.039 F10800.000 ; move to first infill point
;WIDTH:0.303813
G1 F2400.000
G1 X115.443 Y111.205 E0.00376 ; infill
;WIDTH:0.337825
G1 X115.436 Y111.257 E0.00129 ; infill
;WIDTH:0.35847
G1 X115.440 Y111.328 E0.00186 ; infill
;WIDTH:0.371083
G1 X115.457 Y111.766 E0.01198 ; infill
;LAYER_CHANGE
;Z:2.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.440 Y111.328 E-0.11589 ; wipe and retract
;WIPE_END
G1 E-2.28411 F2400.000 ; retract
G1 Z2.675 F10800.000 ; lift Z
G1 Z2.800 ; move to next layer (13)
;AFTER_LAYER_CHANGE
;2.8
G1 Z2.875 ; lift Z
G1 X102.936 Y100.344 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.052 Y100.446 E0.00715 ; perimeter
G1 X103.070 Y100.575 E0.00606 ; perimeter
G1 X102.959 Y100.848 E0.01364 ; perimeter
G1 X102.752 Y101.079 E0.01434 ; perimeter
G1 X102.245 Y101.456 E0.02927 ; perimeter
G1 X102.014 Y101.573 E0.01199 ; perimeter
G1 X101.639 Y101.900 E0.02306 ; perimeter
G1 X101.133 Y102.503 E0.03648 ; perimeter
G1 X100.768 Y103.075 E0.03141 ; perimeter
G1 X100.668 Y103.342 E0.01325 ; perimeter
G1 X100.528 Y103.525 E0.01062 ; perimeter
G1 X100.388 Y103.615 E0.00775 ; perimeter
G1 X100.026 Y103.725 E0.01751 ; perimeter
G1 X99.713 Y103.951 E0.01788 ; perimeter
G1 X99.446 Y104.470 E0.02702 ; perimeter
G1 X99.205 Y104.805 E0.01913 ; perimeter
G1 X98.945 Y104.986 E0.01467 ; perimeter
G1 X98.760 Y105.007 E0.00861 ; perimeter
G1 X98.525 Y105.173 E0.01334 ; perimeter
G1 X98.344 Y105.230 E0.00879 ; perimeter
G1 X98.034 Y105.538 E0.02026 ; perimeter
G1 X97.862 Y105.873 E0.01740 ; perimeter
G1 X97.732 Y106.238 E0.01797 ; perimeter
G1 X97.510 Y106.497 E0.01580 ; perimeter
G1 X96.945 Y107.055 E0.03678 ; perimeter
G1 X96.791 Y107.257 E0.01176 ; perimeter
G1 X96.571 Y107.495 E0.01505 ; perimeter
G1 X96.252 Y107.931 E0.02500 ; perimeter
G1 X96.188 Y108.107 E0.00866 ; perimeter
G1 X96.195 Y108.159 E0.00245 ; perimeter
G1 X96.087 Y108.443 E0.01407 ; perimeter
G1 X95.648 Y108.934 E0.03051 ; perimeter
G1 X95.568 Y108.980 E0.00430 ; perimeter
G1 X95.241 Y109.488 E0.02798 ; perimeter
G1 X95.045 Y110.446 E0.04527 ; perimeter
G1 X94.936 Y111.138 E0.03247 ; perimeter
G1 X94.902 Y112.036 E0.04162 ; perimeter
G1 X94.870 Y112.238 E0.00950 ; perimeter
G1 X94.652 Y112.492 E0.01547 ; perimeter
G1 X94.508 Y112.529 E0.00687 ; perimeter
G1 X94.260 Y112.443 E0.01219 ; perimeter
G1 X94.130 Y112.293 E0.00919 ; perimeter
G1 X94.099 Y112.181 E0.00537 ; perimeter
G1 X94.107 Y111.729 E0.02093 ; perimeter
G1 X94.208 Y111.279 E0.02136 ; perimeter
G1 X94.346 Y110.814 E0.02247 ; perimeter
G1 X94.817 Y108.979 E0.08776 ; perimeter
G1 X94.978 Y108.476 E0.02449 ; perimeter
G1 X95.060 Y108.289 E0.00944 ; perimeter
G1 X95.233 Y108.022 E0.01474 ; perimeter
G1 X95.697 Y107.508 E0.03207 ; perimeter
G1 X95.998 Y107.124 E0.02262 ; perimeter
G1 X96.532 Y106.378 E0.04249 ; perimeter
G1 X96.728 Y106.172 E0.01319 ; perimeter
G1 X96.927 Y105.891 E0.01594 ; perimeter
G1 X97.187 Y105.668 E0.01583 ; perimeter
G1 X97.394 Y105.596 E0.01016 ; perimeter
G1 X97.508 Y105.499 E0.00695 ; perimeter
G1 X97.721 Y105.415 E0.01060 ; perimeter
G1 X97.969 Y105.108 E0.01829 ; perimeter
G1 X98.178 Y104.732 E0.01994 ; perimeter
G1 X98.410 Y104.373 E0.01980 ; perimeter
G1 X98.616 Y104.151 E0.01405 ; perimeter
G1 X98.869 Y103.958 E0.01473 ; perimeter
G1 X99.482 Y103.695 E0.03088 ; perimeter
G1 X99.766 Y103.302 E0.02245 ; perimeter
G1 X99.884 Y102.987 E0.01561 ; perimeter
G1 X100.078 Y102.692 E0.01635 ; perimeter
G1 X100.618 Y102.055 E0.03868 ; perimeter
G1 X100.991 Y101.548 E0.02916 ; perimeter
G1 X101.305 Y101.174 E0.02262 ; perimeter
G1 X101.723 Y100.747 E0.02767 ; perimeter
G1 X102.270 Y100.368 E0.03083 ; perimeter
G1 X102.521 Y100.293 E0.01214 ; perimeter
G1 X102.659 Y100.290 E0.00638 ; perimeter
G1 X102.876 Y100.336 E0.01030 ; perimeter
G1 X102.937 Y100.499 F10800.000 ; move inwards before travel
G1 X102.805 Y100.587 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.421965
G1 F2400.000
G1 X102.459 Y100.761 E0.01219 ; infill
G1 X101.908 Y101.157 E0.02141 ; infill
;WIDTH:0.398864
G1 X101.808 Y101.230 E0.00366 ; infill
;WIDTH:0.358251
G1 X101.778 Y101.255 E0.00103 ; infill
;WIDTH:0.350188
G1 X101.590 Y101.432 E0.00659 ; infill
;WIDTH:0.330246
G1 X101.387 Y101.640 E0.00694 ; infill
;WIDTH:0.285232
G1 X100.888 Y102.264 E0.01610 ; infill
;WIDTH:0.243334
G1 X100.639 Y102.596 E0.00692 ; infill
;WIDTH:0.341205
G1 X100.408 Y102.913 E0.00973 ; infill
G1 X100.243 Y103.214 E0.00852 ; infill
G1 X100.037 Y103.470 E0.00814 ; infill
G1 X99.361 Y104.009 F10800.000 ; move to first infill point
;WIDTH:0.394075
G1 F2400.000
G1 X98.895 Y104.490 E0.01956 ; infill
G1 X98.328 Y104.982 E0.02192 ; infill
G1 X97.359 Y106.052 F10800.000 ; move to first infill point
;WIDTH:0.342335
G1 F2400.000
G1 X96.831 Y106.625 E0.01940 ; infill
;WIDTH:0.242415
G1 X96.270 Y107.330 E0.01495 ; infill
;WIDTH:0.26193
G1 X95.949 Y107.752 E0.00965 ; infill
;WIDTH:0.269561
G1 X95.931 Y107.777 E0.00059 ; infill
;WIDTH:0.305706
G1 X95.882 Y107.859 E0.00207 ; infill
;WIDTH:0.341851
G1 X95.833 Y107.940 E0.00236 ; infill
;WIDTH:0.377997
G1 X95.784 Y108.021 E0.00264 ; infill
;WIDTH:0.401638
G1 X95.669 Y108.223 E0.00693 ; infill
G1 X95.382 Y108.602 E0.01420 ; infill
G1 X95.087 Y108.928 E0.01310 ; infill
G1 X95.113 Y108.844 F10800.000 ; move to first infill point
;WIDTH:0.121592
G1 F2400.000
G1 X94.652 Y110.900 E0.01378 ; infill
;WIDTH:0.223539
G1 X94.562 Y111.372 E0.00720 ; infill
;WIDTH:0.328907
G1 X94.509 Y111.777 E0.00973 ; infill
G1 X94.479 Y112.263 E0.01158 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.509 Y111.777 E-0.12846 ; wipe and retract
G1 X94.562 Y111.372 E-0.10801 ; wipe and retract
;WIPE_END
G1 E-2.16353 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X94.923 Y109.535 ; move to first infill point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.132554
G1 F2400.000
G1 X94.991 Y109.380 E0.00127 ; infill
;WIDTH:0.16911
G1 X95.059 Y109.224 E0.00178 ; infill
;WIDTH:0.205665
G1 X95.127 Y109.068 E0.00230 ; infill
;WIDTH:0.254925
G1 X95.207 Y108.898 E0.00331 ; infill
;WIDTH:0.304186
G1 X95.287 Y108.728 E0.00408 ; infill
;WIDTH:0.339446
G1 X95.325 Y108.670 E0.00171 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.287 Y108.728 E-0.01830 ; wipe and retract
;WIPE_END
G1 E-2.38170 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X109.210 Y95.991 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.352 Y95.886 E0.00598 ; perimeter
G1 X109.425 Y95.856 E0.00269 ; perimeter
G1 X109.581 Y95.836 E0.00530 ; perimeter
G1 X109.620 Y95.902 E0.00258 ; perimeter
G1 X109.615 Y95.920 E0.00065 ; perimeter
G1 X109.269 Y95.980 E0.01191 ; perimeter
G1 X108.098 Y96.206 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.115 Y95.463 E0.05832 ; perimeter
G1 X109.301 Y95.386 E0.00933 ; perimeter
G1 X109.570 Y95.352 E0.01256 ; perimeter
G1 X109.662 Y95.310 E0.00468 ; perimeter
G1 X109.715 Y95.305 E0.00247 ; perimeter
G1 X109.859 Y95.349 E0.00695 ; perimeter
G1 X109.915 Y95.487 E0.00694 ; perimeter
G1 X110.039 Y95.622 E0.00851 ; perimeter
G1 X110.124 Y95.868 E0.01205 ; perimeter
G1 X110.096 Y95.985 E0.00556 ; perimeter
G1 X110.106 Y96.201 E0.01003 ; perimeter
G1 X110.041 Y96.272 E0.00443 ; perimeter
G1 X109.846 Y96.370 E0.01010 ; perimeter
G1 X109.205 Y96.480 E0.03011 ; perimeter
G1 X108.899 Y96.590 E0.01510 ; perimeter
G1 X108.058 Y97.048 E0.04435 ; perimeter
G1 X107.619 Y97.124 E0.02061 ; perimeter
G1 X107.467 Y97.074 E0.00745 ; perimeter
G1 X107.168 Y97.155 E0.01432 ; perimeter
G1 X107.025 Y97.129 E0.00673 ; perimeter
G1 X106.801 Y97.315 E0.01350 ; perimeter
G1 X106.499 Y97.736 E0.02399 ; perimeter
G1 X106.407 Y97.917 E0.00940 ; perimeter
G1 X106.244 Y98.166 E0.01377 ; perimeter
G1 X105.969 Y98.408 E0.01700 ; perimeter
G1 X105.694 Y98.709 E0.01888 ; perimeter
G1 X105.353 Y98.990 E0.02045 ; perimeter
G1 X105.059 Y99.178 E0.01618 ; perimeter
G1 X104.939 Y99.229 E0.00602 ; perimeter
G1 X104.586 Y99.324 E0.01697 ; perimeter
G1 X104.418 Y99.218 E0.00917 ; perimeter
G1 X104.388 Y99.100 E0.00564 ; perimeter
G1 X104.329 Y99.015 E0.00481 ; perimeter
G1 X104.310 Y98.865 E0.00700 ; perimeter
G1 X104.441 Y98.568 E0.01505 ; perimeter
G1 X104.675 Y98.352 E0.01477 ; perimeter
G1 X105.128 Y98.107 E0.02384 ; perimeter
G1 X105.489 Y97.803 E0.02186 ; perimeter
G1 X105.690 Y97.600 E0.01323 ; perimeter
G1 X105.825 Y97.538 E0.00688 ; perimeter
G1 X106.050 Y97.331 E0.01417 ; perimeter
G1 X106.357 Y97.169 E0.01606 ; perimeter
G1 X106.657 Y96.878 E0.01937 ; perimeter
G1 X106.789 Y96.775 E0.00777 ; perimeter
G1 X107.118 Y96.431 E0.02205 ; perimeter
G1 X107.390 Y96.266 E0.01475 ; perimeter
G1 X107.747 Y96.191 E0.01687 ; perimeter
G1 X108.038 Y96.203 E0.01351 ; perimeter
G1 X108.428 Y96.431 F10800.000 ; move inwards before travel
G1 X108.240 Y96.543 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31153
G1 F2400.000
G1 X108.483 Y96.389 E0.00643 ; infill
;WIDTH:0.354679
G1 X108.747 Y96.223 E0.00808 ; infill
;WIDTH:0.384702
G1 X108.991 Y96.093 E0.00785 ; infill
G1 X107.526 Y96.840 F10800.000 ; move to first infill point
;WIDTH:0.289978
G1 F2400.000
G1 X108.240 Y96.543 E0.01588 ; infill
G1 X108.395 Y96.590 F10800.000 ; move to first infill point
;WIDTH:0.443759
G1 F2400.000
G1 X107.810 Y96.636 E0.01954 ; infill
G1 X107.132 Y96.765 E0.02301 ; infill
G1 X106.236 Y97.722 F10800.000 ; move to first infill point
;WIDTH:0.347684
G1 F2400.000
G1 X105.919 Y97.928 E0.00957 ; infill
G1 X105.755 Y98.083 E0.00573 ; infill
;WIDTH:0.332275
G1 X105.409 Y98.410 E0.01145 ; infill
G1 X105.219 Y98.545 E0.00561 ; infill
;WIDTH:0.448145
G1 X104.799 Y98.822 E0.01696 ; infill
;WIDTH:0.419401
G1 X104.574 Y98.946 E0.00803 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.799 Y98.822 E-0.06771 ; wipe and retract
;WIPE_END
G1 E-2.33229 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X114.092 Y94.494 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.282 Y94.462 E0.00652 ; perimeter
G1 X114.299 Y94.641 E0.00607 ; perimeter
G1 X114.141 Y94.529 E0.00654 ; perimeter
G1 X113.294 Y94.518 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.110 Y95.068 E0.02686 ; perimeter
G1 X112.994 Y95.288 E0.01154 ; perimeter
G1 X112.826 Y95.427 E0.01009 ; perimeter
G1 X112.631 Y95.460 E0.00916 ; perimeter
G1 X112.382 Y95.392 E0.01195 ; perimeter
G1 X112.374 Y95.308 E0.00392 ; perimeter
G1 X112.260 Y95.118 E0.01026 ; perimeter
G1 X112.233 Y94.881 E0.01105 ; perimeter
G1 X112.228 Y94.562 E0.01478 ; perimeter
G1 X112.310 Y94.440 E0.00681 ; perimeter
G1 X112.597 Y94.290 E0.01498 ; perimeter
G1 X114.175 Y93.987 E0.07444 ; perimeter
G1 X114.410 Y93.968 E0.01093 ; perimeter
G1 X114.594 Y94.055 E0.00944 ; perimeter
G1 X114.694 Y94.175 E0.00722 ; perimeter
G1 X114.766 Y94.385 E0.01028 ; perimeter
G1 X114.785 Y94.686 E0.01397 ; perimeter
G1 X114.714 Y94.938 E0.01210 ; perimeter
G1 X114.583 Y95.108 E0.00997 ; perimeter
G1 X114.446 Y95.162 E0.00681 ; perimeter
G1 X114.184 Y95.150 E0.01217 ; perimeter
G1 X113.343 Y94.553 E0.04776 ; perimeter
G1 X112.924 Y94.368 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.110 Y95.068 E-0.14918 ; wipe and retract
G1 X112.994 Y95.288 E-0.06576 ; wipe and retract
G1 X112.826 Y95.427 E-0.05751 ; wipe and retract
G1 X112.631 Y95.460 E-0.05218 ; wipe and retract
G1 X112.382 Y95.392 E-0.06809 ; wipe and retract
G1 X112.374 Y95.308 E-0.02233 ; wipe and retract
G1 X112.260 Y95.118 E-0.05843 ; wipe and retract
G1 X112.233 Y94.881 E-0.06295 ; wipe and retract
G1 X112.228 Y94.562 E-0.08418 ; wipe and retract
G1 X112.310 Y94.440 E-0.03882 ; wipe and retract
G1 X112.597 Y94.290 E-0.08536 ; wipe and retract
G1 X114.175 Y93.987 E-0.42410 ; wipe and retract
G1 X114.410 Y93.968 E-0.06227 ; wipe and retract
G1 X114.594 Y94.055 E-0.05380 ; wipe and retract
G1 X114.694 Y94.175 E-0.04115 ; wipe and retract
G1 X114.766 Y94.385 E-0.05858 ; wipe and retract
G1 X114.785 Y94.686 E-0.07959 ; wipe and retract
G1 X114.714 Y94.938 E-0.06894 ; wipe and retract
G1 X114.583 Y95.108 E-0.05680 ; wipe and retract
G1 X114.446 Y95.162 E-0.03878 ; wipe and retract
G1 X114.184 Y95.150 E-0.06933 ; wipe and retract
G1 X113.343 Y94.553 E-0.27210 ; wipe and retract
;WIPE_END
G1 E-0.42977 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X115.680 Y100.016 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.455 Y100.101 E0.01112 ; perimeter
G1 X115.395 Y100.103 E0.00280 ; perimeter
G1 X115.226 Y100.000 E0.00915 ; perimeter
G1 X115.077 Y99.782 E0.01224 ; perimeter
G1 X115.027 Y99.540 E0.01144 ; perimeter
G1 X115.075 Y99.279 E0.01231 ; perimeter
G1 X115.183 Y99.151 E0.00778 ; perimeter
G1 X115.294 Y99.083 E0.00601 ; perimeter
G1 X115.428 Y99.063 E0.00631 ; perimeter
G1 X115.608 Y99.143 E0.00912 ; perimeter
G1 X115.797 Y99.346 E0.01284 ; perimeter
G1 X115.834 Y99.463 E0.00569 ; perimeter
G1 X115.840 Y99.692 E0.01063 ; perimeter
G1 X115.757 Y99.928 E0.01159 ; perimeter
G1 X115.719 Y99.971 E0.00265 ; perimeter
G1 X115.462 Y99.915 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.455 Y100.101 E-0.07767 ; wipe and retract
G1 X115.395 Y100.103 E-0.01595 ; wipe and retract
G1 X115.226 Y100.000 E-0.05214 ; wipe and retract
G1 X115.077 Y99.782 E-0.06970 ; wipe and retract
G1 X115.027 Y99.540 E-0.06516 ; wipe and retract
G1 X115.075 Y99.279 E-0.07014 ; wipe and retract
G1 X115.183 Y99.151 E-0.04432 ; wipe and retract
G1 X115.294 Y99.083 E-0.03422 ; wipe and retract
G1 X115.428 Y99.063 E-0.03595 ; wipe and retract
G1 X115.608 Y99.143 E-0.05197 ; wipe and retract
G1 X115.797 Y99.346 E-0.07316 ; wipe and retract
G1 X115.834 Y99.463 E-0.03244 ; wipe and retract
G1 X115.840 Y99.692 E-0.06054 ; wipe and retract
G1 X115.757 Y99.928 E-0.06603 ; wipe and retract
G1 X115.719 Y99.971 E-0.01509 ; wipe and retract
;WIPE_END
G1 E-1.63553 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X115.608 Y110.790 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.785 Y110.945 E0.01091 ; perimeter
G1 X115.862 Y111.260 E0.01503 ; perimeter
G1 X115.854 Y111.462 E0.00936 ; perimeter
G1 X115.777 Y111.635 E0.00875 ; perimeter
G1 X115.645 Y111.788 E0.00937 ; perimeter
G1 X115.560 Y111.829 E0.00435 ; perimeter
G1 X115.373 Y111.840 E0.00870 ; perimeter
G1 X115.260 Y111.795 E0.00563 ; perimeter
G1 X115.222 Y111.735 E0.00328 ; perimeter
G1 X115.134 Y111.664 E0.00525 ; perimeter
G1 X115.102 Y111.601 E0.00327 ; perimeter
G1 X115.077 Y111.541 E0.00300 ; perimeter
G1 X115.045 Y111.279 E0.01226 ; perimeter
G1 X115.068 Y111.127 E0.00708 ; perimeter
G1 X115.214 Y110.870 E0.01372 ; perimeter
G1 X115.343 Y110.802 E0.00677 ; perimeter
G1 X115.548 Y110.797 E0.00947 ; perimeter
G1 X115.634 Y111.024 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.785 Y110.945 E-0.07371 ; wipe and retract
G1 X115.862 Y111.260 E-0.08565 ; wipe and retract
G1 X115.854 Y111.462 E-0.05333 ; wipe and retract
G1 X115.777 Y111.635 E-0.04983 ; wipe and retract
G1 X115.645 Y111.788 E-0.05341 ; wipe and retract
G1 X115.560 Y111.829 E-0.02479 ; wipe and retract
G1 X115.373 Y111.840 E-0.04955 ; wipe and retract
G1 X115.260 Y111.795 E-0.03205 ; wipe and retract
G1 X115.222 Y111.735 E-0.01871 ; wipe and retract
G1 X115.134 Y111.664 E-0.02989 ; wipe and retract
G1 X115.102 Y111.601 E-0.01863 ; wipe and retract
G1 X115.077 Y111.541 E-0.01711 ; wipe and retract
G1 X115.045 Y111.279 E-0.06984 ; wipe and retract
G1 X115.068 Y111.127 E-0.04034 ; wipe and retract
G1 X115.214 Y110.870 E-0.07815 ; wipe and retract
G1 X115.343 Y110.802 E-0.03859 ; wipe and retract
G1 X115.548 Y110.797 E-0.05398 ; wipe and retract
;WIPE_END
G1 E-1.61243 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X114.499 Y115.524 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.496 Y115.373 E0.00698 ; perimeter
G1 X114.655 Y115.122 E0.01376 ; perimeter
G1 X114.944 Y114.867 E0.01786 ; perimeter
G1 X115.124 Y114.790 E0.00904 ; perimeter
G1 X115.197 Y114.799 E0.00345 ; perimeter
G1 X115.362 Y115.033 E0.01322 ; perimeter
G1 X115.377 Y115.150 E0.00548 ; perimeter
G1 X115.448 Y115.293 E0.00739 ; perimeter
G1 X115.436 Y115.450 E0.00732 ; perimeter
G1 X115.323 Y115.688 E0.01222 ; perimeter
G1 X115.214 Y115.767 E0.00623 ; perimeter
G1 X115.057 Y115.803 E0.00748 ; perimeter
G1 X114.740 Y115.760 E0.01482 ; perimeter
G1 X114.554 Y115.614 E0.01094 ; perimeter
G1 X114.530 Y115.575 E0.00211 ; perimeter
G1 X114.604 Y115.415 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.496 Y115.373 E-0.05399 ; wipe and retract
G1 X114.655 Y115.122 E-0.07841 ; wipe and retract
G1 X114.944 Y114.867 E-0.10175 ; wipe and retract
G1 X115.124 Y114.790 E-0.05149 ; wipe and retract
G1 X115.197 Y114.799 E-0.01965 ; wipe and retract
G1 X115.362 Y115.033 E-0.07529 ; wipe and retract
G1 X115.377 Y115.150 E-0.03124 ; wipe and retract
G1 X115.448 Y115.293 E-0.04212 ; wipe and retract
G1 X115.436 Y115.450 E-0.04168 ; wipe and retract
G1 X115.323 Y115.688 E-0.06960 ; wipe and retract
G1 X115.214 Y115.767 E-0.03547 ; wipe and retract
G1 X115.057 Y115.803 E-0.04259 ; wipe and retract
G1 X114.740 Y115.760 E-0.08444 ; wipe and retract
G1 X114.554 Y115.614 E-0.06233 ; wipe and retract
G1 X114.530 Y115.575 E-0.01204 ; wipe and retract
;WIPE_END
G1 E-1.59793 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X104.335 Y115.746 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.248 Y115.784 E0.00442 ; perimeter
G1 X104.106 Y115.984 E0.01135 ; perimeter
G1 X103.907 Y116.106 E0.01083 ; perimeter
G1 X103.655 Y116.144 E0.01178 ; perimeter
G1 X103.427 Y116.117 E0.01064 ; perimeter
G1 X103.271 Y116.057 E0.00775 ; perimeter
G1 X103.135 Y115.929 E0.00865 ; perimeter
G1 X103.087 Y115.851 E0.00424 ; perimeter
G1 X103.115 Y115.656 E0.00912 ; perimeter
G1 X103.087 Y115.590 E0.00328 ; perimeter
G1 X103.139 Y115.466 E0.00625 ; perimeter
G1 X103.389 Y115.360 E0.01255 ; perimeter
G1 X103.594 Y115.341 E0.00955 ; perimeter
G1 X103.899 Y115.388 E0.01431 ; perimeter
G1 X104.064 Y115.474 E0.00859 ; perimeter
G1 X104.105 Y115.534 E0.00335 ; perimeter
G1 X104.314 Y115.689 E0.01209 ; perimeter
G1 X104.240 Y115.747 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.248 Y115.784 E-0.03057 ; wipe and retract
G1 X104.106 Y115.984 E-0.06467 ; wipe and retract
G1 X103.907 Y116.106 E-0.06168 ; wipe and retract
G1 X103.655 Y116.144 E-0.06710 ; wipe and retract
G1 X103.427 Y116.117 E-0.06064 ; wipe and retract
G1 X103.271 Y116.057 E-0.04417 ; wipe and retract
G1 X103.135 Y115.929 E-0.04927 ; wipe and retract
G1 X103.087 Y115.851 E-0.02418 ; wipe and retract
G1 X103.115 Y115.656 E-0.05197 ; wipe and retract
G1 X103.087 Y115.590 E-0.01871 ; wipe and retract
G1 X103.139 Y115.466 E-0.03561 ; wipe and retract
G1 X103.389 Y115.360 E-0.07151 ; wipe and retract
G1 X103.594 Y115.341 E-0.05442 ; wipe and retract
G1 X103.899 Y115.388 E-0.08150 ; wipe and retract
G1 X104.064 Y115.474 E-0.04896 ; wipe and retract
G1 X104.105 Y115.534 E-0.01906 ; wipe and retract
G1 X104.314 Y115.689 E-0.06885 ; wipe and retract
;WIPE_END
G1 E-1.54712 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 X96.643 Y115.719 ; move to first perimeter point
G1 Z2.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X96.621 Y115.784 E0.00317 ; perimeter
G1 X96.516 Y115.875 E0.00645 ; perimeter
G1 X96.476 Y115.950 E0.00391 ; perimeter
G1 X96.352 Y116.018 E0.00656 ; perimeter
G1 X96.111 Y116.084 E0.01159 ; perimeter
G1 X95.714 Y116.083 E0.01836 ; perimeter
G1 X95.530 Y116.018 E0.00905 ; perimeter
G1 X95.448 Y115.947 E0.00505 ; perimeter
G1 X95.358 Y115.750 E0.01001 ; perimeter
G1 X95.349 Y115.567 E0.00849 ; perimeter
G1 X95.361 Y115.526 E0.00197 ; perimeter
G1 X95.549 Y115.366 E0.01143 ; perimeter
G1 X95.621 Y115.337 E0.00361 ; perimeter
G1 X95.940 Y115.301 E0.01486 ; perimeter
G1 X96.178 Y115.338 E0.01117 ; perimeter
G1 X96.373 Y115.407 E0.00959 ; perimeter
G1 X96.554 Y115.547 E0.01059 ; perimeter
G1 X96.611 Y115.668 E0.00624 ; perimeter
G1 X96.584 Y115.755 F10800.000 ; move inwards before travel
G1 X96.348 Y115.692 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.13679
G1 F2400.000
G1 X96.228 Y115.710 E0.00095 ; infill
;WIDTH:0.235548
G1 X95.651 Y115.596 E0.00942 ; infill
G1 X95.616 Y115.626 F10800.000 ; move to first infill point
;WIDTH:0.306585
G1 F2400.000
G1 X95.744 Y115.698 E0.00322 ; infill
;WIDTH:0.320027
G1 X96.343 Y115.688 E0.01380 ; infill
;LAYER_CHANGE
;Z:3
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.744 Y115.698 E-0.15809 ; wipe and retract
;WIPE_END
G1 E-2.24191 F2400.000 ; retract
G1 Z2.875 F10800.000 ; lift Z
G1 Z3.000 ; move to next layer (14)
;AFTER_LAYER_CHANGE
;3
G1 Z3.075 ; lift Z
G1 X98.275 Y105.045 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.371 Y104.834 E0.01072 ; perimeter
G1 X98.401 Y104.537 E0.01385 ; perimeter
G1 X98.570 Y104.265 E0.01482 ; perimeter
G1 X98.826 Y104.058 E0.01527 ; perimeter
G1 X99.087 Y103.987 E0.01253 ; perimeter
G1 X99.512 Y103.802 E0.02148 ; perimeter
G1 X99.783 Y103.429 E0.02133 ; perimeter
G1 X99.912 Y103.039 E0.01903 ; perimeter
G1 X100.135 Y102.737 E0.01740 ; perimeter
G1 X100.222 Y102.623 E0.00663 ; perimeter
G1 X100.419 Y102.472 E0.01152 ; perimeter
G1 X100.810 Y101.960 E0.02982 ; perimeter
G1 X101.073 Y101.651 E0.01881 ; perimeter
G1 X101.281 Y101.336 E0.01748 ; perimeter
G1 X101.537 Y101.021 E0.01882 ; perimeter
G1 X101.853 Y100.722 E0.02013 ; perimeter
G1 X102.349 Y100.380 E0.02790 ; perimeter
G1 X102.900 Y100.255 E0.02620 ; perimeter
G1 X103.312 Y100.250 E0.01908 ; perimeter
G1 X103.434 Y100.326 E0.00667 ; perimeter
G1 X103.256 Y100.677 E0.01821 ; perimeter
G1 X102.966 Y100.983 E0.01953 ; perimeter
G1 X102.601 Y101.247 E0.02089 ; perimeter
G1 X102.092 Y101.504 E0.02638 ; perimeter
G1 X101.952 Y101.627 E0.00867 ; perimeter
G1 X101.640 Y101.784 E0.01616 ; perimeter
G1 X101.339 Y102.093 E0.01999 ; perimeter
G1 X101.035 Y102.460 E0.02209 ; perimeter
G1 X100.929 Y102.628 E0.00919 ; perimeter
G1 X100.782 Y102.982 E0.01777 ; perimeter
G1 X100.767 Y103.121 E0.00644 ; perimeter
G1 X100.705 Y103.314 E0.00942 ; perimeter
G1 X100.582 Y103.538 E0.01182 ; perimeter
G1 X100.514 Y103.623 E0.00505 ; perimeter
G1 X100.389 Y103.704 E0.00691 ; perimeter
G1 X99.956 Y103.825 E0.02080 ; perimeter
G1 X99.713 Y103.980 E0.01337 ; perimeter
G1 X99.439 Y104.552 E0.02937 ; perimeter
G1 X99.253 Y104.830 E0.01549 ; perimeter
G1 X99.021 Y104.964 E0.01243 ; perimeter
G1 X98.611 Y105.004 E0.01908 ; perimeter
G1 X98.544 Y105.035 E0.00341 ; perimeter
G1 X98.335 Y105.043 E0.00967 ; perimeter
G1 X98.436 Y104.878 F10800.000 ; move inwards before travel
G1 X97.820 Y105.616 ; move to first perimeter point
G1 F1800.000
G1 X97.744 Y105.823 E0.01022 ; perimeter
G1 X97.806 Y105.993 E0.00840 ; perimeter
G1 X97.781 Y106.058 E0.00319 ; perimeter
G1 X97.760 Y106.239 E0.00845 ; perimeter
G1 X97.667 Y106.393 E0.00832 ; perimeter
G1 X97.408 Y106.675 E0.01776 ; perimeter
G1 X96.961 Y107.087 E0.02816 ; perimeter
G1 X96.369 Y107.851 E0.04479 ; perimeter
G1 X96.131 Y108.257 E0.02179 ; perimeter
G1 X95.636 Y108.780 E0.03335 ; perimeter
G1 X95.395 Y108.863 E0.01180 ; perimeter
G1 X95.134 Y109.194 E0.01952 ; perimeter
G1 X94.923 Y109.519 E0.01795 ; perimeter
G1 X95.000 Y109.133 E0.01825 ; perimeter
G1 X95.021 Y108.735 E0.01844 ; perimeter
G1 X95.102 Y108.346 E0.01842 ; perimeter
G1 X95.232 Y108.048 E0.01504 ; perimeter
G1 X95.404 Y107.775 E0.01495 ; perimeter
G1 X96.214 Y106.745 E0.06071 ; perimeter
G1 X96.793 Y106.057 E0.04164 ; perimeter
G1 X97.130 Y105.777 E0.02028 ; perimeter
G1 X97.517 Y105.633 E0.01913 ; perimeter
G1 X97.761 Y105.624 E0.01129 ; perimeter
G1 X97.681 Y105.787 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.744 Y105.823 E-0.05272 ; wipe and retract
G1 X97.806 Y105.993 E-0.04788 ; wipe and retract
G1 X97.781 Y106.058 E-0.01819 ; wipe and retract
G1 X97.760 Y106.239 E-0.04812 ; wipe and retract
G1 X97.667 Y106.393 E-0.04738 ; wipe and retract
G1 X97.408 Y106.675 E-0.10117 ; wipe and retract
G1 X96.961 Y107.087 E-0.16043 ; wipe and retract
G1 X96.369 Y107.851 E-0.25514 ; wipe and retract
G1 X96.131 Y108.257 E-0.12412 ; wipe and retract
G1 X95.636 Y108.780 E-0.19002 ; wipe and retract
G1 X95.395 Y108.863 E-0.06721 ; wipe and retract
G1 X95.134 Y109.194 E-0.11121 ; wipe and retract
G1 X94.923 Y109.519 E-0.10225 ; wipe and retract
G1 X95.000 Y109.133 E-0.10395 ; wipe and retract
G1 X95.021 Y108.735 E-0.10508 ; wipe and retract
G1 X95.102 Y108.346 E-0.10491 ; wipe and retract
G1 X95.232 Y108.048 E-0.08568 ; wipe and retract
G1 X95.404 Y107.775 E-0.08518 ; wipe and retract
G1 X96.214 Y106.745 E-0.34588 ; wipe and retract
G1 X96.516 Y106.387 E-0.12349 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X94.909 Y109.590 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.933 Y110.123 E0.02469 ; perimeter
G1 X94.877 Y110.522 E0.01869 ; perimeter
G1 X94.813 Y111.517 E0.04617 ; perimeter
G1 X94.878 Y111.750 E0.01122 ; perimeter
G1 X94.883 Y112.054 E0.01406 ; perimeter
G1 X94.841 Y112.240 E0.00883 ; perimeter
G1 X94.664 Y112.467 E0.01335 ; perimeter
G1 X94.457 Y112.533 E0.01006 ; perimeter
G1 X94.278 Y112.476 E0.00869 ; perimeter
G1 X94.115 Y112.276 E0.01195 ; perimeter
G1 X94.092 Y112.180 E0.00455 ; perimeter
G1 X94.110 Y111.794 E0.01789 ; perimeter
G1 X94.193 Y111.514 E0.01353 ; perimeter
G1 X94.284 Y111.389 E0.00718 ; perimeter
G1 X94.411 Y110.949 E0.02122 ; perimeter
G1 X94.774 Y109.887 E0.05196 ; perimeter
G1 X94.885 Y109.645 E0.01235 ; perimeter
G1 X94.874 Y109.989 F10800.000 ; move inwards before travel
G1 X95.361 Y108.620 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.280794
G1 F2400.000
G1 X95.447 Y108.456 E0.00366 ; infill
;WIDTH:0.325522
G1 X95.519 Y108.347 E0.00306 ; infill
;WIDTH:0.352996
G1 X96.045 Y107.620 E0.02314 ; infill
G1 X96.678 Y106.810 E0.02651 ; infill
;WIDTH:0.384664
G1 X97.101 Y106.367 E0.01741 ; infill
G1 X97.541 Y105.971 E0.01681 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.101 Y106.367 E-0.15609 ; wipe and retract
G1 X96.678 Y106.810 E-0.16168 ; wipe and retract
;WIPE_END
G1 E-2.08224 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X99.256 Y104.176 ; move to first infill point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.419374
G1 F2400.000
G1 X98.952 Y104.508 E0.01408 ; infill
G1 X98.891 Y104.549 E0.00231 ; infill
;WIDTH:0.407976
G1 X98.679 Y104.755 E0.00897 ; infill
G1 X98.687 Y104.754 F10800.000 ; move to first infill point
;WIDTH:0.224471
G1 F2400.000
G1 X99.367 Y104.144 E0.01379 ; infill
G1 X100.071 Y103.543 F10800.000 ; move to first infill point
;WIDTH:0.36496
G1 F2400.000
G1 X100.241 Y103.322 E0.00748 ; infill
G1 X100.319 Y103.187 E0.00416 ; infill
G1 X100.579 Y102.653 E0.01593 ; infill
G1 X100.596 Y102.637 F10800.000 ; move to first infill point
;WIDTH:0.244047
G1 F2400.000
G1 X100.440 Y102.910 E0.00527 ; infill
G1 X100.200 Y103.507 E0.01075 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.440 Y102.910 E-0.16967 ; wipe and retract
G1 X100.596 Y102.637 E-0.08324 ; wipe and retract
;WIPE_END
G1 E-2.14710 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X101.504 Y101.583 ; move to first infill point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.290977
G1 F2400.000
G1 X101.806 Y101.269 E0.00897 ; infill
;WIDTH:0.300145
G1 X101.899 Y101.187 E0.00265 ; infill
;WIDTH:0.337727
G1 X102.004 Y101.113 E0.00316 ; infill
;WIDTH:0.375309
G1 X102.110 Y101.039 E0.00356 ; infill
;WIDTH:0.417545
G1 X102.377 Y100.880 E0.00969 ; infill
G1 X102.916 Y100.500 E0.02055 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.377 Y100.880 E-0.17407 ; wipe and retract
G1 X102.110 Y101.039 E-0.08210 ; wipe and retract
;WIPE_END
G1 E-2.14383 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X94.613 Y111.697 ; move to first infill point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.210995
G1 F2400.000
G1 X94.441 Y112.275 E0.00842 ; infill
G1 X94.413 Y112.260 F10800.000 ; move to first infill point
;WIDTH:0.333048
G1 F2400.000
G1 X94.484 Y112.070 E0.00488 ; infill
G1 X94.494 Y111.859 E0.00510 ; infill
G1 X94.555 Y111.412 E0.01089 ; infill
G1 X94.554 Y111.412 F10800.000 ; move to first infill point
;WIDTH:0.111623
G1 F2400.000
G1 X94.355 Y112.188 E0.00458 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.554 Y111.412 E-0.21142 ; wipe and retract
;WIPE_END
G1 E-2.18858 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X106.424 Y97.395 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.384 Y97.518 E0.00601 ; perimeter
G1 X106.404 Y97.626 E0.00508 ; perimeter
G1 X106.213 Y98.127 E0.02483 ; perimeter
G1 X105.959 Y98.499 E0.02084 ; perimeter
G1 X105.681 Y98.796 E0.01887 ; perimeter
G1 X105.139 Y99.219 E0.03186 ; perimeter
G1 X105.026 Y99.267 E0.00569 ; perimeter
G1 X104.736 Y99.443 E0.01570 ; perimeter
G1 X104.358 Y99.565 E0.01844 ; perimeter
G1 X104.311 Y99.537 E0.00255 ; perimeter
G1 X104.391 Y99.255 E0.01357 ; perimeter
G1 X104.369 Y99.172 E0.00399 ; perimeter
G1 X104.421 Y98.998 E0.00838 ; perimeter
G1 X104.401 Y98.863 E0.00635 ; perimeter
G1 X104.545 Y98.591 E0.01426 ; perimeter
G1 X104.782 Y98.351 E0.01559 ; perimeter
G1 X105.567 Y97.808 E0.04423 ; perimeter
G1 X105.643 Y97.731 E0.00504 ; perimeter
G1 X105.983 Y97.573 E0.01735 ; perimeter
G1 X106.040 Y97.507 E0.00405 ; perimeter
G1 X106.303 Y97.369 E0.01373 ; perimeter
G1 X106.365 Y97.382 E0.00295 ; perimeter
G1 X106.347 Y97.499 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.384 Y97.518 E-0.03622 ; wipe and retract
G1 X106.404 Y97.626 E-0.02892 ; wipe and retract
G1 X106.213 Y98.127 E-0.14148 ; wipe and retract
G1 X105.959 Y98.499 E-0.11872 ; wipe and retract
G1 X105.681 Y98.796 E-0.10748 ; wipe and retract
G1 X105.139 Y99.219 E-0.18150 ; wipe and retract
G1 X105.026 Y99.267 E-0.03241 ; wipe and retract
G1 X104.736 Y99.443 E-0.08942 ; wipe and retract
G1 X104.358 Y99.565 E-0.10507 ; wipe and retract
G1 X104.311 Y99.537 E-0.01454 ; wipe and retract
G1 X104.391 Y99.255 E-0.07729 ; wipe and retract
G1 X104.369 Y99.172 E-0.02271 ; wipe and retract
G1 X104.421 Y98.998 E-0.04775 ; wipe and retract
G1 X104.401 Y98.863 E-0.03615 ; wipe and retract
G1 X104.545 Y98.591 E-0.08125 ; wipe and retract
G1 X104.782 Y98.351 E-0.08879 ; wipe and retract
G1 X105.567 Y97.808 E-0.25198 ; wipe and retract
G1 X105.643 Y97.731 E-0.02874 ; wipe and retract
G1 X105.983 Y97.573 E-0.09884 ; wipe and retract
G1 X106.040 Y97.507 E-0.02306 ; wipe and retract
G1 X106.303 Y97.369 E-0.07824 ; wipe and retract
G1 X106.365 Y97.382 E-0.01682 ; wipe and retract
;WIPE_END
G1 E-0.69261 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X109.277 Y96.022 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.371 Y95.980 E0.00348 ; perimeter
G1 X109.571 Y95.949 E0.00686 ; perimeter
G1 X109.643 Y95.986 E0.00273 ; perimeter
G1 X109.336 Y96.016 E0.01044 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.371 Y95.980 E-0.01308 ; wipe and retract
G1 X109.571 Y95.949 E-0.05345 ; wipe and retract
G1 X109.643 Y95.986 E-0.02131 ; wipe and retract
G1 X109.336 Y96.016 E-0.08139 ; wipe and retract
;WIPE_END
G1 E-2.23076 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X107.034 Y96.977 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.157 Y96.601 E0.01834 ; perimeter
G1 X107.327 Y96.419 E0.01154 ; perimeter
G1 X107.612 Y96.263 E0.01504 ; perimeter
G1 X107.786 Y96.232 E0.00821 ; perimeter
G1 X107.971 Y96.170 E0.00902 ; perimeter
G1 X108.112 Y96.176 E0.00655 ; perimeter
G1 X108.337 Y96.007 E0.01303 ; perimeter
G1 X108.878 Y95.671 E0.02952 ; perimeter
G1 X109.234 Y95.514 E0.01803 ; perimeter
G1 X109.590 Y95.459 E0.01669 ; perimeter
G1 X109.862 Y95.524 E0.01294 ; perimeter
G1 X110.051 Y95.716 E0.01248 ; perimeter
G1 X110.164 Y95.788 E0.00619 ; perimeter
G1 X110.230 Y95.935 E0.00747 ; perimeter
G1 X110.323 Y96.055 E0.00705 ; perimeter
G1 X110.333 Y96.243 E0.00871 ; perimeter
G1 X110.185 Y96.389 E0.00963 ; perimeter
G1 X110.083 Y96.440 E0.00531 ; perimeter
G1 X109.873 Y96.471 E0.00981 ; perimeter
G1 X109.710 Y96.463 E0.00757 ; perimeter
G1 X109.195 Y96.514 E0.02397 ; perimeter
G1 X108.753 Y96.753 E0.02326 ; perimeter
G1 X108.138 Y97.126 E0.03331 ; perimeter
G1 X107.933 Y97.114 E0.00949 ; perimeter
G1 X107.756 Y97.149 E0.00841 ; perimeter
G1 X107.449 Y97.048 E0.01493 ; perimeter
G1 X107.093 Y96.987 E0.01677 ; perimeter
G1 X107.321 Y96.705 F10800.000 ; move inwards before travel
G1 X107.624 Y96.852 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.416587
G1 F2400.000
G1 X108.290 Y96.555 E0.02266 ; infill
G1 X108.574 Y96.364 E0.01065 ; infill
;WIDTH:0.427897
G1 X109.047 Y96.098 E0.01737 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.574 Y96.364 E-0.14321 ; wipe and retract
;WIPE_END
G1 E-2.25679 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X106.020 Y97.822 ; move to first infill point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.284568
G1 F2400.000
G1 X105.644 Y98.245 E0.01139 ; infill
;WIDTH:0.405344
G1 X104.921 Y98.835 E0.02811 ; infill
G1 X104.666 Y99.008 E0.00928 ; infill
G1 X104.653 Y99.212 F10800.000 ; move to first infill point
;WIDTH:0.272469
G1 F2400.000
G1 X105.145 Y98.393 E0.01825 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.653 Y99.212 E-0.25234 ; wipe and retract
;WIPE_END
G1 E-2.14766 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X112.746 Y95.123 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.738 Y94.924 E0.00675 ; perimeter
G1 X112.883 Y94.905 E0.00496 ; perimeter
G1 X112.831 Y95.106 E0.00704 ; perimeter
G1 X112.805 Y95.111 E0.00090 ; perimeter
G1 X113.760 Y94.792 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.271 Y94.632 E0.01814 ; perimeter
G1 X114.272 Y94.752 E0.00407 ; perimeter
G1 X114.222 Y94.846 E0.00361 ; perimeter
G1 X113.865 Y94.869 E0.01211 ; perimeter
G1 X113.808 Y94.827 E0.00239 ; perimeter
G1 X113.321 Y94.520 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.459 Y94.381 E0.00905 ; perimeter
G1 X114.283 Y94.123 E0.04002 ; perimeter
G1 X114.485 Y94.140 E0.00937 ; perimeter
G1 X114.588 Y94.200 E0.00553 ; perimeter
G1 X114.688 Y94.330 E0.00760 ; perimeter
G1 X114.753 Y94.537 E0.01004 ; perimeter
G1 X114.754 Y94.817 E0.01296 ; perimeter
G1 X114.697 Y95.021 E0.00983 ; perimeter
G1 X114.514 Y95.276 E0.01450 ; perimeter
G1 X114.392 Y95.333 E0.00624 ; perimeter
G1 X114.208 Y95.328 E0.00856 ; perimeter
G1 X113.723 Y95.362 E0.02250 ; perimeter
G1 X113.336 Y95.079 E0.02223 ; perimeter
G1 X113.237 Y95.461 E0.01827 ; perimeter
G1 X112.985 Y95.567 E0.01267 ; perimeter
G1 X112.464 Y95.673 E0.02460 ; perimeter
G1 X112.389 Y95.645 E0.00371 ; perimeter
G1 X112.212 Y95.509 E0.01036 ; perimeter
G1 X112.224 Y95.372 E0.00634 ; perimeter
G1 X112.275 Y95.256 E0.00588 ; perimeter
G1 X112.243 Y94.959 E0.01386 ; perimeter
G1 X112.278 Y94.751 E0.00973 ; perimeter
G1 X112.381 Y94.563 E0.00998 ; perimeter
G1 X112.605 Y94.452 E0.01158 ; perimeter
G1 X112.999 Y94.410 E0.01832 ; perimeter
G1 X113.144 Y94.424 E0.00676 ; perimeter
G1 X113.268 Y94.491 E0.00656 ; perimeter
G1 X113.479 Y94.635 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.459 Y94.381 E-0.05803 ; wipe and retract
G1 X114.283 Y94.123 E-0.22800 ; wipe and retract
G1 X114.485 Y94.140 E-0.05340 ; wipe and retract
G1 X114.588 Y94.200 E-0.03153 ; wipe and retract
G1 X114.688 Y94.330 E-0.04331 ; wipe and retract
G1 X114.753 Y94.537 E-0.05720 ; wipe and retract
G1 X114.754 Y94.817 E-0.07384 ; wipe and retract
G1 X114.697 Y95.021 E-0.05601 ; wipe and retract
G1 X114.514 Y95.276 E-0.08261 ; wipe and retract
G1 X114.392 Y95.333 E-0.03554 ; wipe and retract
G1 X114.208 Y95.328 E-0.04876 ; wipe and retract
G1 X113.723 Y95.362 E-0.12819 ; wipe and retract
G1 X113.336 Y95.079 E-0.12665 ; wipe and retract
G1 X113.237 Y95.461 E-0.10409 ; wipe and retract
G1 X112.985 Y95.567 E-0.07220 ; wipe and retract
G1 X112.464 Y95.673 E-0.14014 ; wipe and retract
G1 X112.389 Y95.645 E-0.02116 ; wipe and retract
G1 X112.212 Y95.509 E-0.05902 ; wipe and retract
G1 X112.224 Y95.372 E-0.03613 ; wipe and retract
G1 X112.275 Y95.256 E-0.03350 ; wipe and retract
G1 X112.243 Y94.959 E-0.07898 ; wipe and retract
G1 X112.278 Y94.751 E-0.05542 ; wipe and retract
G1 X112.381 Y94.563 E-0.05683 ; wipe and retract
G1 X112.605 Y94.452 E-0.06596 ; wipe and retract
G1 X112.999 Y94.410 E-0.10437 ; wipe and retract
G1 X113.144 Y94.424 E-0.03849 ; wipe and retract
G1 X113.268 Y94.491 E-0.03735 ; wipe and retract
;WIPE_END
G1 E-0.47330 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X115.343 Y99.088 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.477 Y99.066 E0.00630 ; perimeter
G1 X115.647 Y99.159 E0.00899 ; perimeter
G1 X115.813 Y99.322 E0.01077 ; perimeter
G1 X115.859 Y99.472 E0.00725 ; perimeter
G1 X115.868 Y99.726 E0.01178 ; perimeter
G1 X115.767 Y100.011 E0.01400 ; perimeter
G1 X115.675 Y100.135 E0.00715 ; perimeter
G1 X115.546 Y100.158 E0.00608 ; perimeter
G1 X115.424 Y100.128 E0.00582 ; perimeter
G1 X115.243 Y99.997 E0.01035 ; perimeter
G1 X115.097 Y99.733 E0.01397 ; perimeter
G1 X115.060 Y99.508 E0.01060 ; perimeter
G1 X115.076 Y99.417 E0.00428 ; perimeter
G1 X115.135 Y99.258 E0.00786 ; perimeter
G1 X115.289 Y99.114 E0.00974 ; perimeter
G1 X115.451 Y99.169 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.477 Y99.066 E-0.05111 ; wipe and retract
G1 X115.647 Y99.159 E-0.05124 ; wipe and retract
G1 X115.813 Y99.322 E-0.06137 ; wipe and retract
G1 X115.859 Y99.472 E-0.04133 ; wipe and retract
G1 X115.868 Y99.726 E-0.06712 ; wipe and retract
G1 X115.767 Y100.011 E-0.07975 ; wipe and retract
G1 X115.675 Y100.135 E-0.04073 ; wipe and retract
G1 X115.546 Y100.158 E-0.03462 ; wipe and retract
G1 X115.424 Y100.128 E-0.03316 ; wipe and retract
G1 X115.243 Y99.997 E-0.05898 ; wipe and retract
G1 X115.097 Y99.733 E-0.07956 ; wipe and retract
G1 X115.060 Y99.508 E-0.06037 ; wipe and retract
G1 X115.076 Y99.417 E-0.02437 ; wipe and retract
G1 X115.135 Y99.258 E-0.04477 ; wipe and retract
G1 X115.289 Y99.114 E-0.05551 ; wipe and retract
;WIPE_END
G1 E-1.61602 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X115.383 Y110.722 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.624 Y110.759 E0.01128 ; perimeter
G1 X115.793 Y110.909 E0.01044 ; perimeter
G1 X115.861 Y111.154 E0.01179 ; perimeter
G1 X115.856 Y111.365 E0.00976 ; perimeter
G1 X115.789 Y111.519 E0.00775 ; perimeter
G1 X115.643 Y111.660 E0.00943 ; perimeter
G1 X115.490 Y111.717 E0.00757 ; perimeter
G1 X115.360 Y111.715 E0.00599 ; perimeter
G1 X115.161 Y111.572 E0.01135 ; perimeter
G1 X115.096 Y111.445 E0.00661 ; perimeter
G1 X115.050 Y111.211 E0.01102 ; perimeter
G1 X115.068 Y111.053 E0.00737 ; perimeter
G1 X115.202 Y110.851 E0.01123 ; perimeter
G1 X115.334 Y110.757 E0.00753 ; perimeter
G1 X115.538 Y110.910 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.624 Y110.759 E-0.07639 ; wipe and retract
G1 X115.793 Y110.909 E-0.05950 ; wipe and retract
G1 X115.861 Y111.154 E-0.06718 ; wipe and retract
G1 X115.856 Y111.365 E-0.05560 ; wipe and retract
G1 X115.789 Y111.519 E-0.04416 ; wipe and retract
G1 X115.643 Y111.660 E-0.05372 ; wipe and retract
G1 X115.490 Y111.717 E-0.04313 ; wipe and retract
G1 X115.360 Y111.715 E-0.03411 ; wipe and retract
G1 X115.161 Y111.572 E-0.06469 ; wipe and retract
G1 X115.096 Y111.445 E-0.03768 ; wipe and retract
G1 X115.050 Y111.211 E-0.06280 ; wipe and retract
G1 X115.068 Y111.053 E-0.04199 ; wipe and retract
G1 X115.202 Y110.851 E-0.06399 ; wipe and retract
G1 X115.334 Y110.757 E-0.04291 ; wipe and retract
;WIPE_END
G1 E-1.65216 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X115.215 Y115.767 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.096 Y115.797 E0.00568 ; perimeter
G1 X114.800 Y115.751 E0.01387 ; perimeter
G1 X114.678 Y115.653 E0.00725 ; perimeter
G1 X114.588 Y115.466 E0.00960 ; perimeter
G1 X114.596 Y115.366 E0.00464 ; perimeter
G1 X114.631 Y115.268 E0.00484 ; perimeter
G1 X114.703 Y115.146 E0.00655 ; perimeter
G1 X114.944 Y114.944 E0.01458 ; perimeter
G1 X115.068 Y114.887 E0.00634 ; perimeter
G1 X115.189 Y114.943 E0.00617 ; perimeter
G1 X115.367 Y115.141 E0.01237 ; perimeter
G1 X115.447 Y115.300 E0.00824 ; perimeter
G1 X115.437 Y115.450 E0.00694 ; perimeter
G1 X115.400 Y115.552 E0.00505 ; perimeter
G1 X115.329 Y115.681 E0.00680 ; perimeter
G1 X115.263 Y115.731 E0.00385 ; perimeter
G1 X115.113 Y115.699 F10800.000 ; move inwards before travel
G1 X114.960 Y115.414 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.32232
G1 F2400.000
G1 X115.043 Y115.377 E0.00213 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.960 Y115.414 E-0.02415 ; wipe and retract
;WIPE_END
G1 E-2.37585 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X104.209 Y115.740 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.039 Y116.036 E0.01580 ; perimeter
G1 X103.919 Y116.118 E0.00675 ; perimeter
G1 X103.716 Y116.145 E0.00946 ; perimeter
G1 X103.568 Y116.102 E0.00715 ; perimeter
G1 X103.425 Y116.089 E0.00665 ; perimeter
G1 X103.361 Y116.065 E0.00317 ; perimeter
G1 X103.316 Y115.955 E0.00547 ; perimeter
G1 X103.263 Y115.904 E0.00343 ; perimeter
G1 X103.246 Y115.671 E0.01081 ; perimeter
G1 X103.266 Y115.546 E0.00590 ; perimeter
G1 X103.335 Y115.479 E0.00443 ; perimeter
G1 X103.351 Y115.434 E0.00225 ; perimeter
G1 X103.516 Y115.363 E0.00830 ; perimeter
G1 X103.641 Y115.352 E0.00583 ; perimeter
G1 X103.927 Y115.403 E0.01346 ; perimeter
G1 X104.085 Y115.486 E0.00828 ; perimeter
G1 X104.201 Y115.681 E0.01050 ; perimeter
G1 X103.896 Y115.876 F10800.000 ; move inwards before travel
G1 X103.618 Y115.740 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311197
G1 F2400.000
G1 X103.626 Y115.731 E0.00027 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.618 Y115.740 E-0.00322 ; wipe and retract
;WIPE_END
G1 E-2.39678 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 X96.399 Y115.713 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.398 Y115.809 E0.00442 ; perimeter
G1 X96.339 Y115.919 E0.00581 ; perimeter
G1 X96.244 Y116.004 E0.00591 ; perimeter
G1 X96.039 Y116.082 E0.01014 ; perimeter
G1 X95.690 Y116.101 E0.01623 ; perimeter
G1 X95.440 Y116.033 E0.01197 ; perimeter
G1 X95.297 Y115.903 E0.00899 ; perimeter
G1 X95.220 Y115.763 E0.00739 ; perimeter
G1 X95.193 Y115.565 E0.00923 ; perimeter
G1 X95.220 Y115.470 E0.00459 ; perimeter
G1 X95.436 Y115.317 E0.01229 ; perimeter
G1 X95.685 Y115.263 E0.01178 ; perimeter
G1 X96.199 Y115.410 E0.02476 ; perimeter
G1 X96.288 Y115.523 E0.00665 ; perimeter
G1 X96.394 Y115.608 E0.00629 ; perimeter
G1 X96.399 Y115.653 E0.00211 ; perimeter
G1 X96.325 Y115.775 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.398 Y115.809 E-0.04100 ; wipe and retract
G1 X96.339 Y115.919 E-0.03308 ; wipe and retract
G1 X96.244 Y116.004 E-0.03365 ; wipe and retract
G1 X96.039 Y116.082 E-0.05776 ; wipe and retract
G1 X95.690 Y116.101 E-0.09244 ; wipe and retract
G1 X95.440 Y116.033 E-0.06818 ; wipe and retract
G1 X95.297 Y115.903 E-0.05121 ; wipe and retract
G1 X95.220 Y115.763 E-0.04212 ; wipe and retract
G1 X95.193 Y115.565 E-0.05259 ; wipe and retract
G1 X95.220 Y115.470 E-0.02613 ; wipe and retract
G1 X95.436 Y115.317 E-0.07002 ; wipe and retract
G1 X95.685 Y115.263 E-0.06711 ; wipe and retract
G1 X96.199 Y115.410 E-0.14104 ; wipe and retract
G1 X96.288 Y115.523 E-0.03790 ; wipe and retract
G1 X96.394 Y115.608 E-0.03584 ; wipe and retract
G1 X96.399 Y115.653 E-0.01203 ; wipe and retract
;WIPE_END
G1 E-1.53789 F2400.000 ; retract
G1 Z3.075 F10800.000 ; lift Z
G1 Z3.200 ; move to next layer (15)
;AFTER_LAYER_CHANGE
;3.2
G1 Z3.275 ; lift Z
G1 X95.421 Y108.670 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.293 Y108.636 E0.00613 ; perimeter
G1 X95.233 Y108.447 E0.00917 ; perimeter
G1 X95.273 Y108.107 E0.01588 ; perimeter
G1 X95.338 Y107.961 E0.00740 ; perimeter
G1 X95.693 Y107.418 E0.03007 ; perimeter
G1 X96.441 Y106.525 E0.05391 ; perimeter
G1 X96.858 Y106.057 E0.02906 ; perimeter
G1 X97.174 Y105.795 E0.01903 ; perimeter
G1 X97.396 Y105.721 E0.01084 ; perimeter
G1 X97.573 Y105.771 E0.00851 ; perimeter
G1 X97.741 Y105.878 E0.00923 ; perimeter
G1 X97.801 Y106.055 E0.00863 ; perimeter
G1 X97.773 Y106.287 E0.01086 ; perimeter
G1 X97.723 Y106.418 E0.00646 ; perimeter
G1 X97.533 Y106.619 E0.01285 ; perimeter
G1 X97.172 Y106.829 E0.01936 ; perimeter
G1 X96.878 Y107.121 E0.01918 ; perimeter
G1 X96.672 Y107.490 E0.01955 ; perimeter
G1 X96.524 Y107.679 E0.01115 ; perimeter
G1 X96.252 Y108.128 E0.02432 ; perimeter
G1 X95.743 Y108.562 E0.03096 ; perimeter
G1 X95.476 Y108.648 E0.01298 ; perimeter
G1 X95.352 Y108.557 F10800.000 ; move inwards before travel
G1 X95.490 Y108.326 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.322741
G1 F2400.000
G1 X95.636 Y108.164 E0.00508 ; infill
;WIDTH:0.350718
G1 X95.783 Y108.002 E0.00558 ; infill
;WIDTH:0.38272
G1 X95.830 Y107.959 E0.00180 ; infill
;WIDTH:0.407748
G1 X96.186 Y107.458 E0.01865 ; infill
;WIDTH:0.278657
G1 X96.602 Y106.891 E0.01378 ; infill
;WIDTH:0.292626
G1 X96.718 Y106.765 E0.00356 ; infill
;WIDTH:0.317564
G1 X96.955 Y106.518 E0.00782 ; infill
;WIDTH:0.328223
G1 X97.263 Y106.279 E0.00925 ; infill
G1 X97.406 Y106.121 E0.00506 ; infill
G1 X97.539 Y106.035 E0.00375 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.406 Y106.121 E-0.04173 ; wipe and retract
G1 X97.263 Y106.279 E-0.05623 ; wipe and retract
G1 X96.955 Y106.518 E-0.10290 ; wipe and retract
;WIPE_END
G1 E-2.19913 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X94.598 Y111.242 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.633 Y111.389 E0.00697 ; perimeter
G1 X94.703 Y111.424 E0.00365 ; perimeter
G1 X94.767 Y111.696 E0.01294 ; perimeter
G1 X94.850 Y111.925 E0.01125 ; perimeter
G1 X94.864 Y112.128 E0.00942 ; perimeter
G1 X94.832 Y112.260 E0.00629 ; perimeter
G1 X94.718 Y112.457 E0.01055 ; perimeter
G1 X94.566 Y112.568 E0.00872 ; perimeter
G1 X94.392 Y112.582 E0.00809 ; perimeter
G1 X94.273 Y112.552 E0.00570 ; perimeter
G1 X94.172 Y112.456 E0.00644 ; perimeter
G1 X94.113 Y112.341 E0.00599 ; perimeter
G1 X94.086 Y112.199 E0.00672 ; perimeter
G1 X94.106 Y111.908 E0.01352 ; perimeter
G1 X94.189 Y111.683 E0.01112 ; perimeter
G1 X94.323 Y111.507 E0.01025 ; perimeter
G1 X94.541 Y111.377 E0.01172 ; perimeter
G1 X94.575 Y111.298 E0.00400 ; perimeter
G1 X94.581 Y111.392 F10800.000 ; move inwards before travel
G1 X94.506 Y111.665 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.152351
G1 F2400.000
G1 X94.385 Y112.326 E0.00612 ; infill
G1 X94.401 Y112.336 F10800.000 ; move to first infill point
;WIDTH:0.160153
G1 F2400.000
G1 X94.413 Y112.301 E0.00036 ; infill
;WIDTH:0.185629
G1 X94.426 Y112.266 E0.00044 ; infill
;WIDTH:0.214481
G1 X94.434 Y112.251 E0.00025 ; infill
;WIDTH:0.243333
G1 X94.442 Y112.236 E0.00029 ; infill
;WIDTH:0.255922
G1 X94.445 Y112.226 E0.00017 ; infill
;WIDTH:0.296342
G1 X94.458 Y112.190 E0.00082 ; infill
;WIDTH:0.304657
G1 X94.460 Y112.177 E0.00029 ; infill
;WIDTH:0.314955
G1 X94.477 Y112.003 E0.00394 ; infill
G1 X94.442 Y111.749 E0.00581 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.477 Y112.003 E-0.06773 ; wipe and retract
G1 X94.460 Y112.177 E-0.04597 ; wipe and retract
;WIPE_END
G1 E-2.28630 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X96.161 Y115.990 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.006 Y116.072 E0.00812 ; perimeter
G1 X95.650 Y116.115 E0.01659 ; perimeter
G1 X95.352 Y116.050 E0.01416 ; perimeter
G1 X95.156 Y115.867 E0.01239 ; perimeter
G1 X95.084 Y115.728 E0.00724 ; perimeter
G1 X95.033 Y115.472 E0.01209 ; perimeter
G1 X95.071 Y115.329 E0.00684 ; perimeter
G1 X95.212 Y115.230 E0.00797 ; perimeter
G1 X95.441 Y115.226 E0.01062 ; perimeter
G1 X95.740 Y115.284 E0.01411 ; perimeter
G1 X96.017 Y115.395 E0.01384 ; perimeter
G1 X96.173 Y115.501 E0.00874 ; perimeter
G1 X96.221 Y115.573 E0.00401 ; perimeter
G1 X96.262 Y115.809 E0.01108 ; perimeter
G1 X96.197 Y115.943 E0.00690 ; perimeter
G1 X95.991 Y115.947 F10800.000 ; move inwards before travel
G1 X95.308 Y115.619 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.390901
G1 F2400.000
G1 X95.622 Y115.684 E0.00927 ; infill
G1 X95.998 Y115.800 E0.01140 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.622 Y115.684 E-0.10393 ; wipe and retract
G1 X95.308 Y115.619 E-0.08450 ; wipe and retract
;WIPE_END
G1 E-2.21158 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X103.318 Y115.834 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.317 Y115.694 E0.00652 ; perimeter
G1 X103.413 Y115.486 E0.01060 ; perimeter
G1 X103.461 Y115.438 E0.00314 ; perimeter
G1 X103.639 Y115.367 E0.00887 ; perimeter
G1 X103.973 Y115.417 E0.01566 ; perimeter
G1 X104.099 Y115.489 E0.00674 ; perimeter
G1 X104.190 Y115.632 E0.00782 ; perimeter
G1 X104.227 Y115.746 E0.00558 ; perimeter
G1 X104.164 Y115.936 E0.00923 ; perimeter
G1 X104.103 Y116.032 E0.00528 ; perimeter
G1 X103.941 Y116.125 E0.00865 ; perimeter
G1 X103.743 Y116.148 E0.00928 ; perimeter
G1 X103.473 Y116.078 E0.01289 ; perimeter
G1 X103.397 Y116.033 E0.00408 ; perimeter
G1 X103.338 Y115.890 E0.00717 ; perimeter
G1 X103.424 Y115.742 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.317 Y115.694 E-0.05220 ; wipe and retract
G1 X103.413 Y115.486 E-0.06038 ; wipe and retract
G1 X103.461 Y115.438 E-0.01790 ; wipe and retract
G1 X103.639 Y115.367 E-0.05051 ; wipe and retract
G1 X103.973 Y115.417 E-0.08919 ; wipe and retract
G1 X104.099 Y115.489 E-0.03842 ; wipe and retract
G1 X104.190 Y115.632 E-0.04453 ; wipe and retract
G1 X104.227 Y115.746 E-0.03180 ; wipe and retract
G1 X104.164 Y115.936 E-0.05259 ; wipe and retract
G1 X104.103 Y116.032 E-0.03008 ; wipe and retract
G1 X103.941 Y116.125 E-0.04928 ; wipe and retract
G1 X103.743 Y116.148 E-0.05285 ; wipe and retract
G1 X103.473 Y116.078 E-0.07340 ; wipe and retract
G1 X103.397 Y116.033 E-0.02323 ; wipe and retract
G1 X103.338 Y115.890 E-0.04087 ; wipe and retract
;WIPE_END
G1 E-1.69277 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X114.744 Y115.677 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.663 Y115.402 E0.01328 ; perimeter
G1 X114.739 Y115.156 E0.01192 ; perimeter
G1 X114.908 Y115.008 E0.01044 ; perimeter
G1 X115.067 Y114.943 E0.00795 ; perimeter
G1 X115.160 Y114.982 E0.00464 ; perimeter
G1 X115.371 Y115.152 E0.01256 ; perimeter
G1 X115.446 Y115.307 E0.00795 ; perimeter
G1 X115.438 Y115.450 E0.00666 ; perimeter
G1 X115.400 Y115.553 E0.00510 ; perimeter
G1 X115.309 Y115.706 E0.00820 ; perimeter
G1 X115.229 Y115.762 E0.00456 ; perimeter
G1 X115.095 Y115.795 E0.00638 ; perimeter
G1 X114.829 Y115.747 E0.01252 ; perimeter
G1 X114.790 Y115.715 E0.00233 ; perimeter
G1 X114.866 Y115.418 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.663 Y115.402 E-0.08919 ; wipe and retract
G1 X114.739 Y115.156 E-0.06788 ; wipe and retract
G1 X114.908 Y115.008 E-0.05949 ; wipe and retract
G1 X115.067 Y114.943 E-0.04531 ; wipe and retract
G1 X115.160 Y114.982 E-0.02646 ; wipe and retract
G1 X115.371 Y115.152 E-0.07153 ; wipe and retract
G1 X115.446 Y115.307 E-0.04530 ; wipe and retract
G1 X115.438 Y115.450 E-0.03792 ; wipe and retract
G1 X115.400 Y115.553 E-0.02905 ; wipe and retract
G1 X115.309 Y115.706 E-0.04673 ; wipe and retract
G1 X115.229 Y115.762 E-0.02595 ; wipe and retract
G1 X115.095 Y115.795 E-0.03635 ; wipe and retract
G1 X114.829 Y115.747 E-0.07132 ; wipe and retract
G1 X114.790 Y115.715 E-0.01330 ; wipe and retract
;WIPE_END
G1 E-1.73423 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X115.517 Y110.648 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.638 Y110.677 E0.00576 ; perimeter
G1 X115.802 Y110.854 E0.01117 ; perimeter
G1 X115.859 Y111.042 E0.00907 ; perimeter
G1 X115.858 Y111.268 E0.01048 ; perimeter
G1 X115.762 Y111.467 E0.01026 ; perimeter
G1 X115.661 Y111.555 E0.00619 ; perimeter
G1 X115.491 Y111.616 E0.00836 ; perimeter
G1 X115.370 Y111.613 E0.00559 ; perimeter
G1 X115.278 Y111.561 E0.00488 ; perimeter
G1 X115.184 Y111.477 E0.00585 ; perimeter
G1 X115.092 Y111.313 E0.00871 ; perimeter
G1 X115.054 Y111.150 E0.00776 ; perimeter
G1 X115.080 Y110.952 E0.00925 ; perimeter
G1 X115.223 Y110.753 E0.01135 ; perimeter
G1 X115.370 Y110.657 E0.00812 ; perimeter
G1 X115.457 Y110.652 E0.00406 ; perimeter
G1 X115.574 Y110.759 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.638 Y110.677 E-0.04821 ; wipe and retract
G1 X115.802 Y110.854 E-0.06366 ; wipe and retract
G1 X115.859 Y111.042 E-0.05166 ; wipe and retract
G1 X115.858 Y111.268 E-0.05970 ; wipe and retract
G1 X115.762 Y111.467 E-0.05844 ; wipe and retract
G1 X115.661 Y111.555 E-0.03527 ; wipe and retract
G1 X115.491 Y111.616 E-0.04764 ; wipe and retract
G1 X115.370 Y111.613 E-0.03185 ; wipe and retract
G1 X115.278 Y111.561 E-0.02782 ; wipe and retract
G1 X115.184 Y111.477 E-0.03333 ; wipe and retract
G1 X115.092 Y111.313 E-0.04964 ; wipe and retract
G1 X115.054 Y111.150 E-0.04422 ; wipe and retract
G1 X115.080 Y110.952 E-0.05269 ; wipe and retract
G1 X115.223 Y110.753 E-0.06467 ; wipe and retract
G1 X115.370 Y110.657 E-0.04627 ; wipe and retract
G1 X115.457 Y110.652 E-0.02313 ; wipe and retract
;WIPE_END
G1 E-1.66183 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X115.443 Y100.308 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.305 Y100.177 E0.00881 ; perimeter
G1 X115.284 Y100.061 E0.00546 ; perimeter
G1 X115.113 Y99.736 E0.01700 ; perimeter
G1 X115.089 Y99.484 E0.01172 ; perimeter
G1 X115.161 Y99.200 E0.01359 ; perimeter
G1 X115.331 Y98.977 E0.01300 ; perimeter
G1 X115.469 Y98.985 E0.00636 ; perimeter
G1 X115.615 Y99.054 E0.00749 ; perimeter
G1 X115.678 Y99.139 E0.00493 ; perimeter
G1 X115.776 Y99.217 E0.00577 ; perimeter
G1 X115.847 Y99.354 E0.00715 ; perimeter
G1 X115.893 Y99.670 E0.01481 ; perimeter
G1 X115.895 Y99.775 E0.00485 ; perimeter
G1 X115.821 Y99.972 E0.00978 ; perimeter
G1 X115.809 Y100.102 E0.00603 ; perimeter
G1 X115.756 Y100.195 E0.00496 ; perimeter
G1 X115.615 Y100.354 E0.00985 ; perimeter
G1 X115.557 Y100.377 E0.00289 ; perimeter
G1 X115.494 Y100.339 E0.00340 ; perimeter
G1 X115.456 Y100.118 F10800.000 ; move inwards before travel
G1 X115.549 Y100.043 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.112191
G1 F2400.000
G1 X115.545 Y99.966 E0.00045 ; infill
;WIDTH:0.142145
G1 X115.534 Y99.913 E0.00044 ; infill
;WIDTH:0.152627
G1 X115.448 Y99.234 E0.00625 ; infill
G1 X115.425 Y99.251 F10800.000 ; move to first infill point
;WIDTH:0.188322
G1 F2400.000
G1 X115.446 Y99.352 E0.00126 ; infill
;WIDTH:0.210822
G1 X115.593 Y99.893 E0.00783 ; infill
G1 X115.581 Y99.945 F10800.000 ; move to first infill point
;WIDTH:0.311128
G1 F2400.000
G1 X115.480 Y99.514 E0.00987 ; infill
G1 X115.483 Y99.465 E0.00108 ; infill
G1 X115.543 Y99.430 E0.00156 ; infill
;WIDTH:0.26641
G1 X115.604 Y99.396 E0.00130 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.543 Y99.430 E-0.01841 ; wipe and retract
;WIPE_END
G1 E-2.38159 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X112.805 Y95.299 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.695 Y95.320 E0.00379 ; perimeter
G1 X112.718 Y95.208 E0.00387 ; perimeter
G1 X112.764 Y95.256 E0.00223 ; perimeter
G1 X113.509 Y95.337 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.893 Y94.575 E0.03956 ; perimeter
G1 X114.034 Y94.396 E0.01055 ; perimeter
G1 X114.306 Y94.279 E0.01371 ; perimeter
G1 X114.471 Y94.292 E0.00766 ; perimeter
G1 X114.577 Y94.350 E0.00560 ; perimeter
G1 X114.687 Y94.497 E0.00852 ; perimeter
G1 X114.731 Y94.639 E0.00687 ; perimeter
G1 X114.744 Y94.897 E0.01199 ; perimeter
G1 X114.698 Y95.049 E0.00733 ; perimeter
G1 X114.689 Y95.161 E0.00521 ; perimeter
G1 X114.640 Y95.224 E0.00370 ; perimeter
G1 X114.606 Y95.348 E0.00596 ; perimeter
G1 X114.539 Y95.464 E0.00620 ; perimeter
G1 X114.367 Y95.542 E0.00872 ; perimeter
G1 X113.901 Y95.581 E0.02169 ; perimeter
G1 X112.252 Y95.895 E0.07772 ; perimeter
G1 X111.901 Y95.878 E0.01632 ; perimeter
G1 X111.998 Y95.588 E0.01421 ; perimeter
G1 X112.087 Y95.494 E0.00597 ; perimeter
G1 X112.238 Y95.162 E0.01691 ; perimeter
G1 X112.245 Y94.980 E0.00842 ; perimeter
G1 X112.295 Y94.867 E0.00574 ; perimeter
G1 X112.443 Y94.689 E0.01070 ; perimeter
G1 X112.622 Y94.615 E0.00897 ; perimeter
G1 X112.882 Y94.634 E0.01210 ; perimeter
G1 X113.021 Y94.709 E0.00731 ; perimeter
G1 X113.000 Y94.805 E0.00455 ; perimeter
G1 X113.467 Y95.294 E0.03135 ; perimeter
G1 X113.835 Y95.568 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.893 Y94.575 E-0.22055 ; wipe and retract
G1 X114.034 Y94.396 E-0.06010 ; wipe and retract
G1 X114.306 Y94.279 E-0.07809 ; wipe and retract
G1 X114.471 Y94.292 E-0.04367 ; wipe and retract
G1 X114.577 Y94.350 E-0.03189 ; wipe and retract
G1 X114.687 Y94.497 E-0.04856 ; wipe and retract
G1 X114.731 Y94.639 E-0.03912 ; wipe and retract
G1 X114.744 Y94.897 E-0.06832 ; wipe and retract
G1 X114.698 Y95.049 E-0.04175 ; wipe and retract
G1 X114.689 Y95.161 E-0.02967 ; wipe and retract
G1 X114.640 Y95.224 E-0.02110 ; wipe and retract
G1 X114.606 Y95.348 E-0.03397 ; wipe and retract
G1 X114.539 Y95.464 E-0.03533 ; wipe and retract
G1 X114.367 Y95.542 E-0.04968 ; wipe and retract
G1 X113.901 Y95.581 E-0.12357 ; wipe and retract
G1 X112.252 Y95.895 E-0.44279 ; wipe and retract
G1 X111.901 Y95.878 E-0.09295 ; wipe and retract
G1 X111.998 Y95.588 E-0.08093 ; wipe and retract
G1 X112.087 Y95.494 E-0.03399 ; wipe and retract
G1 X112.238 Y95.162 E-0.09633 ; wipe and retract
G1 X112.245 Y94.980 E-0.04800 ; wipe and retract
G1 X112.295 Y94.867 E-0.03267 ; wipe and retract
G1 X112.443 Y94.689 E-0.06098 ; wipe and retract
G1 X112.622 Y94.615 E-0.05108 ; wipe and retract
G1 X112.882 Y94.634 E-0.06896 ; wipe and retract
G1 X113.021 Y94.709 E-0.04162 ; wipe and retract
G1 X113.000 Y94.805 E-0.02591 ; wipe and retract
G1 X113.467 Y95.294 E-0.17861 ; wipe and retract
;WIPE_END
G1 E-0.21980 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X108.186 Y96.661 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.100 Y96.714 E0.00341 ; perimeter
G1 X108.025 Y96.708 E0.00255 ; perimeter
G1 X108.128 Y96.677 E0.00364 ; perimeter
G1 X107.450 Y96.493 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.561 Y96.393 E0.00690 ; perimeter
G1 X107.864 Y96.251 E0.01552 ; perimeter
G1 X108.049 Y96.199 E0.00889 ; perimeter
G1 X108.369 Y96.067 E0.01602 ; perimeter
G1 X108.711 Y95.853 E0.01870 ; perimeter
G1 X109.065 Y95.691 E0.01801 ; perimeter
G1 X109.444 Y95.592 E0.01818 ; perimeter
G1 X109.649 Y95.566 E0.00954 ; perimeter
G1 X109.698 Y95.565 E0.00227 ; perimeter
G1 X109.814 Y95.607 E0.00574 ; perimeter
G1 X110.214 Y95.785 E0.02024 ; perimeter
G1 X110.295 Y95.873 E0.00556 ; perimeter
G1 X110.407 Y95.939 E0.00599 ; perimeter
G1 X110.594 Y96.187 E0.01441 ; perimeter
G1 X110.626 Y96.201 E0.00163 ; perimeter
G1 X110.640 Y96.240 E0.00195 ; perimeter
G1 X110.582 Y96.264 E0.00289 ; perimeter
G1 X110.318 Y96.512 E0.01678 ; perimeter
G1 X110.079 Y96.543 E0.01116 ; perimeter
G1 X109.889 Y96.507 E0.00899 ; perimeter
G1 X109.712 Y96.515 E0.00822 ; perimeter
G1 X109.577 Y96.483 E0.00639 ; perimeter
G1 X109.119 Y96.533 E0.02134 ; perimeter
G1 X108.942 Y96.636 E0.00951 ; perimeter
G1 X108.732 Y96.815 E0.01276 ; perimeter
G1 X108.556 Y97.000 E0.01183 ; perimeter
G1 X108.224 Y97.204 E0.01803 ; perimeter
G1 X107.934 Y97.188 E0.01348 ; perimeter
G1 X107.671 Y97.092 E0.01296 ; perimeter
G1 X107.407 Y96.888 E0.01545 ; perimeter
G1 X107.376 Y96.687 E0.00944 ; perimeter
G1 X107.429 Y96.549 E0.00684 ; perimeter
G1 X107.599 Y96.503 F10800.000 ; move inwards before travel
G1 X108.392 Y96.530 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352993
G1 F2400.000
G1 X108.726 Y96.307 E0.01035 ; infill
G1 X109.026 Y96.145 E0.00879 ; infill
;WIDTH:0.383422
G1 X109.117 Y96.120 E0.00269 ; infill
;WIDTH:0.413852
G1 X109.209 Y96.094 E0.00293 ; infill
;WIDTH:0.462279
G1 X109.570 Y96.031 E0.01280 ; infill
;WIDTH:0.472112
G1 X109.643 Y96.030 E0.00259 ; infill
G1 X110.265 Y96.233 E0.02337 ; infill
G1 X110.259 Y96.239 F10800.000 ; move to first infill point
;WIDTH:0.2941
G1 F2400.000
G1 X109.398 Y95.853 E0.01970 ; infill
G1 X109.159 Y95.916 F10800.000 ; move to first infill point
;WIDTH:0.376652
G1 F2400.000
G1 X109.937 Y96.101 E0.02221 ; infill
G1 X110.291 Y96.208 E0.01026 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.937 Y96.101 E-0.09759 ; wipe and retract
G1 X109.159 Y95.916 E-0.21125 ; wipe and retract
;WIPE_END
G1 E-2.09116 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X100.690 Y102.568 ; move to first perimeter point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.074 Y102.024 E0.03085 ; perimeter
G1 X100.804 Y102.420 E0.02222 ; perimeter
G1 X100.673 Y102.871 E0.02172 ; perimeter
G1 X100.724 Y102.957 E0.00462 ; perimeter
G1 X100.686 Y103.395 E0.02037 ; perimeter
G1 X100.593 Y103.601 E0.01046 ; perimeter
G1 X100.495 Y103.724 E0.00727 ; perimeter
G1 X100.381 Y103.800 E0.00638 ; perimeter
G1 X99.879 Y103.968 E0.02453 ; perimeter
G1 X99.718 Y104.083 E0.00911 ; perimeter
G1 X99.450 Y104.665 E0.02971 ; perimeter
G1 X99.317 Y104.856 E0.01077 ; perimeter
G1 X99.121 Y104.965 E0.01040 ; perimeter
G1 X98.965 Y104.980 E0.00726 ; perimeter
G1 X98.630 Y104.923 E0.01576 ; perimeter
G1 X98.521 Y104.807 E0.00736 ; perimeter
G1 X98.520 Y104.571 E0.01093 ; perimeter
G1 X98.553 Y104.417 E0.00729 ; perimeter
G1 X98.630 Y104.294 E0.00672 ; perimeter
G1 X98.797 Y104.143 E0.01045 ; perimeter
G1 X99.096 Y104.039 E0.01464 ; perimeter
G1 X99.331 Y103.987 E0.01118 ; perimeter
G1 X99.554 Y103.889 E0.01127 ; perimeter
G1 X99.795 Y103.534 E0.01984 ; perimeter
G1 X99.924 Y103.124 E0.01992 ; perimeter
G1 X99.991 Y103.003 E0.00642 ; perimeter
G1 X100.168 Y102.807 E0.01223 ; perimeter
G1 X100.475 Y102.574 E0.01783 ; perimeter
G1 X100.630 Y102.570 E0.00720 ; perimeter
G1 X101.076 Y102.674 F10800.000 ; move inwards before travel
G1 X101.142 Y101.951 ; move to first perimeter point
G1 F1800.000
G1 X101.307 Y101.772 E0.01127 ; perimeter
G1 X101.390 Y101.472 E0.01443 ; perimeter
G1 X101.793 Y100.897 E0.03253 ; perimeter
G1 X102.032 Y100.663 E0.01548 ; perimeter
G1 X102.467 Y100.365 E0.02444 ; perimeter
G1 X103.160 Y100.110 E0.03421 ; perimeter
G1 X103.395 Y100.098 E0.01091 ; perimeter
G1 X103.824 Y99.875 E0.02237 ; perimeter
G1 X104.083 Y99.569 E0.01858 ; perimeter
G1 X104.170 Y99.375 E0.00986 ; perimeter
G1 X104.351 Y99.142 E0.01365 ; perimeter
G1 X104.410 Y98.903 E0.01140 ; perimeter
G1 X104.468 Y98.771 E0.00670 ; perimeter
G1 X104.552 Y98.664 E0.00627 ; perimeter
G1 X104.877 Y98.363 E0.02055 ; perimeter
G1 X105.523 Y97.903 E0.03671 ; perimeter
G1 X105.885 Y97.737 E0.01844 ; perimeter
G1 X106.034 Y97.722 E0.00696 ; perimeter
G1 X106.102 Y97.760 E0.00358 ; perimeter
G1 X106.140 Y97.892 E0.00640 ; perimeter
G1 X106.099 Y98.132 E0.01126 ; perimeter
G1 X106.019 Y98.338 E0.01027 ; perimeter
G1 X105.811 Y98.656 E0.01756 ; perimeter
G1 X105.661 Y98.833 E0.01077 ; perimeter
G1 X105.519 Y98.980 E0.00943 ; perimeter
G1 X104.923 Y99.481 E0.03608 ; perimeter
G1 X104.107 Y100.005 E0.04493 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.980 Y100.120 E0.00716 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.184 Y100.884 E0.05110 ; perimeter
G1 X102.957 Y101.038 E0.01271 ; perimeter
G1 X102.366 Y101.335 E0.03068 ; perimeter
G1 X102.205 Y101.372 E0.00764 ; perimeter
G1 X101.850 Y101.539 E0.01817 ; perimeter
G1 X101.671 Y101.564 E0.00836 ; perimeter
G1 X101.190 Y101.916 E0.02761 ; perimeter
G1 X101.323 Y101.790 F10800.000 ; move inwards before travel
G1 X101.868 Y101.236 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323268
G1 F2400.000
G1 X102.275 Y100.958 E0.01149 ; infill
;WIDTH:0.341069
G1 X102.656 Y100.732 E0.01100 ; infill
G1 X103.369 Y100.373 E0.01978 ; infill
G1 X104.494 Y99.350 F10800.000 ; move to first infill point
;WIDTH:0.359335
G1 F2400.000
G1 X104.872 Y98.958 E0.01432 ; infill
G1 X105.559 Y98.345 E0.02421 ; infill
;WIDTH:0.249512
G1 X105.862 Y98.059 E0.00716 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.559 Y98.345 E-0.11005 ; wipe and retract
;WIPE_END
G1 E-2.28995 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 X100.442 Y102.952 ; move to first infill point
G1 Z3.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.21213
G1 F2400.000
G1 X100.054 Y103.655 E0.01129 ; infill
G1 X100.070 Y103.650 F10800.000 ; move to first infill point
;WIDTH:0.333796
G1 F2400.000
G1 X100.231 Y103.436 E0.00648 ; infill
;WIDTH:0.351279
G1 X100.253 Y103.393 E0.00122 ; infill
;WIDTH:0.363877
G1 X100.292 Y103.293 E0.00288 ; infill
G1 X100.356 Y102.967 E0.00887 ; infill
;LAYER_CHANGE
;Z:3.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.292 Y103.293 E-0.08767 ; wipe and retract
G1 X100.253 Y103.393 E-0.02844 ; wipe and retract
;WIPE_END
G1 E-2.28389 F2400.000 ; retract
G1 Z3.275 F10800.000 ; lift Z
G1 Z3.400 ; move to next layer (16)
;AFTER_LAYER_CHANGE
;3.4
G1 Z3.475 ; lift Z
G1 X115.057 Y99.331 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.133 Y99.074 E0.01241 ; perimeter
G1 X115.135 Y98.940 E0.00620 ; perimeter
G1 X115.208 Y98.732 E0.01022 ; perimeter
G1 X115.255 Y98.692 E0.00283 ; perimeter
G1 X115.326 Y98.683 E0.00333 ; perimeter
G1 X115.478 Y98.824 E0.00960 ; perimeter
G1 X115.583 Y98.885 E0.00564 ; perimeter
G1 X115.749 Y99.105 E0.01274 ; perimeter
G1 X115.842 Y99.275 E0.00898 ; perimeter
G1 X115.882 Y99.470 E0.00925 ; perimeter
G1 X115.918 Y99.840 E0.01719 ; perimeter
G1 X115.896 Y99.897 E0.00286 ; perimeter
G1 X115.870 Y100.186 E0.01341 ; perimeter
G1 X115.755 Y100.546 E0.01750 ; perimeter
G1 X115.637 Y100.699 E0.00900 ; perimeter
G1 X115.570 Y100.726 E0.00334 ; perimeter
G1 X115.459 Y100.651 E0.00621 ; perimeter
G1 X115.319 Y100.451 E0.01130 ; perimeter
G1 X115.262 Y100.200 E0.01191 ; perimeter
G1 X115.228 Y99.929 E0.01266 ; perimeter
G1 X115.124 Y99.731 E0.01038 ; perimeter
G1 X115.071 Y99.390 E0.01599 ; perimeter
G1 X115.301 Y99.220 F10800.000 ; move inwards before travel
G1 X115.418 Y99.067 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.305203
G1 F2400.000
G1 X115.448 Y99.344 E0.00608 ; infill
G1 X115.557 Y99.792 E0.01005 ; infill
;WIDTH:0.180621
G1 X115.565 Y100.124 E0.00381 ; infill
G1 X115.547 Y100.313 E0.00218 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.565 Y100.124 E-0.05015 ; wipe and retract
G1 X115.557 Y99.792 E-0.08773 ; wipe and retract
;WIPE_END
G1 E-2.26211 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X108.224 Y96.725 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.164 Y96.804 E0.00334 ; perimeter
G1 X108.140 Y96.763 E0.00158 ; perimeter
G1 X108.169 Y96.750 E0.00109 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.164 Y96.804 E-0.01418 ; wipe and retract
G1 X108.140 Y96.763 E-0.01233 ; wipe and retract
G1 X108.169 Y96.750 E-0.00847 ; wipe and retract
;WIPE_END
G1 E-2.36502 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X112.607 Y95.459 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.726 Y95.258 E0.00791 ; perimeter
G1 X112.958 Y95.377 E0.00881 ; perimeter
G1 X112.665 Y95.445 E0.01015 ; perimeter
G1 X114.038 Y95.268 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.237 Y95.108 E0.00866 ; perimeter
G1 X114.213 Y95.316 E0.00709 ; perimeter
G1 X114.096 Y95.283 E0.00413 ; perimeter
G1 X113.377 Y95.052 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.590 Y94.997 E0.01020 ; perimeter
G1 X113.857 Y94.804 E0.01525 ; perimeter
G1 X113.893 Y94.742 E0.00332 ; perimeter
G1 X114.121 Y94.523 E0.01465 ; perimeter
G1 X114.275 Y94.449 E0.00792 ; perimeter
G1 X114.422 Y94.443 E0.00680 ; perimeter
G1 X114.572 Y94.519 E0.00779 ; perimeter
G1 X114.666 Y94.645 E0.00731 ; perimeter
G1 X114.710 Y94.771 E0.00618 ; perimeter
G1 X114.733 Y94.945 E0.00813 ; perimeter
G1 X114.703 Y95.343 E0.01846 ; perimeter
G1 X114.659 Y95.520 E0.00847 ; perimeter
G1 X114.557 Y95.677 E0.00869 ; perimeter
G1 X114.537 Y95.752 E0.00361 ; perimeter
G1 X114.464 Y95.817 E0.00451 ; perimeter
G1 X114.225 Y95.819 E0.01108 ; perimeter
G1 X113.966 Y95.748 E0.01247 ; perimeter
G1 X113.584 Y95.798 E0.01783 ; perimeter
G1 X113.235 Y95.807 E0.01616 ; perimeter
G1 X112.037 Y96.088 E0.05703 ; perimeter
G1 X111.941 Y96.145 E0.00517 ; perimeter
G1 X111.876 Y96.161 E0.00309 ; perimeter
G1 X111.511 Y96.225 E0.01716 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.357 Y96.252 E0.00652 ; perimeter (bridge)
G1 X111.161 Y96.333 E0.00888 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.561 Y96.583 E0.03010 ; perimeter
G1 X110.259 Y96.620 E0.01412 ; perimeter
G1 X109.920 Y96.566 E0.01587 ; perimeter
G1 X109.483 Y96.451 E0.02097 ; perimeter
G1 X109.127 Y96.450 E0.01647 ; perimeter
G1 X108.928 Y96.600 E0.01155 ; perimeter
G1 X108.480 Y97.183 E0.03408 ; perimeter
G1 X108.291 Y97.296 E0.01018 ; perimeter
G1 X107.999 Y97.276 E0.01357 ; perimeter
G1 X107.831 Y97.188 E0.00880 ; perimeter
G1 X107.695 Y96.958 E0.01234 ; perimeter
G1 X107.581 Y96.861 E0.00694 ; perimeter
G1 X107.556 Y96.692 E0.00792 ; perimeter
G1 X107.613 Y96.522 E0.00830 ; perimeter
G1 X107.699 Y96.436 E0.00561 ; perimeter
G1 X108.672 Y95.993 E0.04954 ; perimeter
G1 X109.578 Y95.693 E0.04421 ; perimeter
G1 X109.821 Y95.678 E0.01128 ; perimeter
G1 X109.897 Y95.705 E0.00371 ; perimeter
G1 X110.058 Y95.718 E0.00749 ; perimeter
G1 X110.362 Y95.843 E0.01523 ; perimeter
G1 X110.430 Y95.851 E0.00316 ; perimeter
G1 X110.701 Y96.014 E0.01467 ; perimeter
G1 X110.791 Y96.012 E0.00416 ; perimeter
G1 X111.054 Y96.129 E0.01335 ; perimeter
G1 X111.121 Y96.096 E0.00346 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.318 Y95.997 E0.00924 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.605 Y95.852 E0.01487 ; perimeter
G1 X111.738 Y95.684 E0.00995 ; perimeter
G1 X111.996 Y95.483 E0.01516 ; perimeter
G1 X112.076 Y95.316 E0.00854 ; perimeter
G1 X112.191 Y95.214 E0.00715 ; perimeter
G1 X112.323 Y94.974 E0.01271 ; perimeter
G1 X112.490 Y94.821 E0.01049 ; perimeter
G1 X112.688 Y94.756 E0.00964 ; perimeter
G1 X112.754 Y94.761 E0.00307 ; perimeter
G1 X112.924 Y94.815 E0.00825 ; perimeter
G1 X113.323 Y95.024 E0.02090 ; perimeter
G1 X113.491 Y95.240 F10800.000 ; move inwards before travel
G1 X113.421 Y95.347 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.133574
G1 F2400.000
G1 X113.587 Y95.269 E0.00138 ; infill
G1 X113.437 Y95.514 F10800.000 ; move to first infill point
;WIDTH:0.0973525
G1 F2400.000
G1 X113.660 Y95.442 E0.00106 ; infill
G1 X113.697 Y95.483 E0.00025 ; infill
G1 X113.440 Y95.537 E0.00119 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.697 Y95.483 E-0.06941 ; wipe and retract
G1 X113.660 Y95.442 E-0.01451 ; wipe and retract
G1 X113.437 Y95.514 E-0.06196 ; wipe and retract
;WIPE_END
G1 E-2.25412 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X108.739 Y96.228 ; move to first infill point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.292075
G1 F2400.000
G1 X109.523 Y96.085 E0.01649 ; infill
;WIDTH:0.302285
G1 X110.238 Y96.053 E0.01544 ; infill
G1 X110.583 Y96.224 F10800.000 ; move to first infill point
;WIDTH:0.33786
G1 F2400.000
G1 X110.266 Y96.225 E0.00777 ; infill
G1 X109.762 Y96.096 E0.01277 ; infill
G1 X109.284 Y96.050 E0.01177 ; infill
G1 X109.224 Y96.144 F10800.000 ; move to first infill point
;WIDTH:0.172006
G1 F2400.000
G1 X109.132 Y96.158 E0.00100 ; infill
;WIDTH:0.144098
G1 X109.047 Y96.171 E0.00073 ; infill
;WIDTH:0.119084
G1 X108.905 Y96.238 E0.00099 ; infill
;WIDTH:0.212013
G1 X108.699 Y96.351 E0.00330 ; infill
G1 X108.399 Y96.558 E0.00513 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.699 Y96.351 E-0.09626 ; wipe and retract
G1 X108.905 Y96.238 E-0.06201 ; wipe and retract
;WIPE_END
G1 E-2.24172 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X105.894 Y98.024 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.921 Y98.138 E0.00546 ; perimeter
G1 X105.897 Y98.333 E0.00908 ; perimeter
G1 X105.826 Y98.543 E0.01026 ; perimeter
G1 X105.594 Y98.877 E0.01884 ; perimeter
G1 X105.134 Y99.362 E0.03098 ; perimeter
G1 X104.747 Y99.677 E0.02309 ; perimeter
G1 X104.620 Y99.813 E0.00863 ; perimeter
G1 X104.347 Y99.984 E0.01491 ; perimeter
G1 X103.811 Y100.462 E0.03328 ; perimeter
G1 X103.413 Y100.780 E0.02358 ; perimeter
G1 X102.967 Y101.023 E0.02354 ; perimeter
G1 X102.841 Y101.054 E0.00602 ; perimeter
G1 X102.638 Y101.161 E0.01059 ; perimeter
G1 X102.281 Y101.243 E0.01697 ; perimeter
G1 X101.903 Y101.300 E0.01771 ; perimeter
G1 X101.848 Y101.263 E0.00308 ; perimeter
G1 X101.881 Y101.088 E0.00820 ; perimeter
G1 X101.994 Y100.880 E0.01100 ; perimeter
G1 X102.320 Y100.518 E0.02256 ; perimeter
G1 X102.696 Y100.249 E0.02140 ; perimeter
G1 X102.879 Y100.144 E0.00977 ; perimeter
G1 X103.298 Y99.986 E0.02078 ; perimeter
G1 X103.685 Y99.758 E0.02078 ; perimeter
G1 X103.943 Y99.554 E0.01524 ; perimeter
G1 X103.989 Y99.454 E0.00510 ; perimeter
G1 X104.569 Y98.727 E0.04308 ; perimeter
G1 X104.973 Y98.374 E0.02484 ; perimeter
G1 X105.319 Y98.135 E0.01951 ; perimeter
G1 X105.623 Y97.996 E0.01547 ; perimeter
G1 X105.781 Y97.977 E0.00738 ; perimeter
G1 X105.836 Y98.008 E0.00291 ; perimeter
G1 X105.848 Y98.132 F10800.000 ; move inwards before travel
G1 X105.669 Y98.255 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.271305
G1 F2400.000
G1 X105.221 Y98.689 E0.01185 ; infill
;WIDTH:0.405331
G1 X104.732 Y99.169 E0.02063 ; infill
;WIDTH:0.366808
G1 X104.617 Y99.285 E0.00441 ; infill
;WIDTH:0.33198
G1 X104.502 Y99.402 E0.00393 ; infill
;WIDTH:0.297153
G1 X104.388 Y99.532 E0.00366 ; infill
;WIDTH:0.282766
G1 X104.278 Y99.631 E0.00295 ; infill
G1 X104.191 Y99.730 F10800.000 ; move to first infill point
;WIDTH:0.156463
G1 F2400.000
G1 X104.174 Y99.746 E0.00022 ; infill
;WIDTH:0.147715
G1 X103.593 Y100.204 E0.00645 ; infill
;WIDTH:0.25896
G1 X103.317 Y100.378 E0.00586 ; infill
;WIDTH:0.352504
G1 X102.721 Y100.695 E0.01740 ; infill
;WIDTH:0.315535
G1 X102.692 Y100.711 E0.00073 ; infill
;WIDTH:0.307263
G1 X102.563 Y100.790 E0.00333 ; infill
;WIDTH:0.286678
G1 X102.307 Y100.990 E0.00658 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.563 Y100.790 E-0.08566 ; wipe and retract
;WIPE_END
G1 E-2.31434 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X100.470 Y102.865 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.640 Y103.048 E0.01156 ; perimeter
G1 X100.672 Y103.403 E0.01652 ; perimeter
G1 X100.571 Y103.723 E0.01555 ; perimeter
G1 X100.492 Y103.831 E0.00619 ; perimeter
G1 X100.370 Y103.917 E0.00692 ; perimeter
G1 X100.027 Y104.041 E0.01689 ; perimeter
G1 X99.751 Y104.238 E0.01572 ; perimeter
G1 X99.468 Y104.765 E0.02770 ; perimeter
G1 X99.359 Y104.895 E0.00785 ; perimeter
G1 X99.220 Y104.968 E0.00728 ; perimeter
G1 X99.077 Y104.983 E0.00669 ; perimeter
G1 X98.782 Y104.889 E0.01435 ; perimeter
G1 X98.664 Y104.756 E0.00823 ; perimeter
G1 X98.617 Y104.554 E0.00960 ; perimeter
G1 X98.679 Y104.351 E0.00984 ; perimeter
G1 X98.815 Y104.203 E0.00933 ; perimeter
G1 X99.064 Y104.095 E0.01256 ; perimeter
G1 X99.514 Y103.983 E0.02146 ; perimeter
G1 X99.657 Y103.828 E0.00978 ; perimeter
G1 X99.799 Y103.570 E0.01365 ; perimeter
G1 X99.930 Y103.218 E0.01742 ; perimeter
G1 X100.027 Y103.041 E0.00931 ; perimeter
G1 X100.120 Y102.964 E0.00561 ; perimeter
G1 X100.230 Y102.919 E0.00550 ; perimeter
G1 X100.339 Y102.838 E0.00628 ; perimeter
G1 X100.412 Y102.853 E0.00345 ; perimeter
G1 X100.483 Y103.114 F10800.000 ; move inwards before travel
G1 X100.374 Y103.116 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.126377
G1 F2400.000
G1 X100.367 Y103.167 E0.00036 ; infill
G1 X100.000 Y103.794 E0.00505 ; infill
G1 X99.954 Y103.811 F10800.000 ; move to first infill point
;WIDTH:0.177067
G1 F2400.000
G1 X100.427 Y103.375 E0.00718 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.954 Y103.811 E-0.16981 ; wipe and retract
;WIPE_END
G1 E-2.23019 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X97.836 Y105.903 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.892 Y106.060 E0.00772 ; perimeter
G1 X97.870 Y106.245 E0.00863 ; perimeter
G1 X97.812 Y106.407 E0.00797 ; perimeter
G1 X97.643 Y106.581 E0.01125 ; perimeter
G1 X97.239 Y106.762 E0.02048 ; perimeter
G1 X97.092 Y106.798 E0.00704 ; perimeter
G1 X96.939 Y106.925 E0.00920 ; perimeter
G1 X96.781 Y107.162 E0.01316 ; perimeter
G1 X96.572 Y107.572 E0.02134 ; perimeter
G1 X96.537 Y107.745 E0.00819 ; perimeter
G1 X96.342 Y108.068 E0.01745 ; perimeter
G1 X96.122 Y108.289 E0.01445 ; perimeter
G1 X95.912 Y108.358 E0.01027 ; perimeter
G1 X95.669 Y108.404 E0.01145 ; perimeter
G1 X95.510 Y108.412 E0.00735 ; perimeter
G1 X95.451 Y108.370 E0.00336 ; perimeter
G1 X95.406 Y108.224 E0.00709 ; perimeter
G1 X95.438 Y107.900 E0.01508 ; perimeter
G1 X95.719 Y107.455 E0.02437 ; perimeter
G1 X95.949 Y107.181 E0.01657 ; perimeter
G1 X96.032 Y107.112 E0.00501 ; perimeter
G1 X96.560 Y106.536 E0.03620 ; perimeter
G1 X96.664 Y106.382 E0.00859 ; perimeter
G1 X97.002 Y105.992 E0.02390 ; perimeter
G1 X97.205 Y105.823 E0.01227 ; perimeter
G1 X97.384 Y105.751 E0.00894 ; perimeter
G1 X97.694 Y105.805 E0.01456 ; perimeter
G1 X97.787 Y105.869 E0.00521 ; perimeter
G1 X97.770 Y106.056 F10800.000 ; move inwards before travel
G1 X97.585 Y106.030 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.181974
G1 F2400.000
G1 X96.940 Y106.528 E0.00942 ; infill
;WIDTH:0.169948
G1 X96.902 Y106.565 E0.00056 ; infill
;WIDTH:0.161264
G1 X96.840 Y106.635 E0.00092 ; infill
;WIDTH:0.134818
G1 X96.777 Y106.704 E0.00071 ; infill
;WIDTH:0.108372
G1 X96.739 Y106.740 E0.00028 ; infill
;WIDTH:0.101006
G1 X96.443 Y107.131 E0.00237 ; infill
;WIDTH:0.229754
G1 X96.273 Y107.375 E0.00463 ; infill
G1 X96.227 Y107.433 F10800.000 ; move to first infill point
;WIDTH:0.31174
G1 F2400.000
G1 X95.864 Y108.120 E0.01737 ; infill
G1 X95.660 Y108.104 F10800.000 ; move to first infill point
;WIDTH:0.306711
G1 F2400.000
G1 X96.302 Y107.668 E0.01702 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.660 Y108.104 E-0.20477 ; wipe and retract
;WIPE_END
G1 E-2.19523 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X94.623 Y111.629 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.692 Y111.708 E0.00488 ; perimeter
G1 X94.839 Y112.064 E0.01783 ; perimeter
G1 X94.847 Y112.195 E0.00607 ; perimeter
G1 X94.700 Y112.555 E0.01803 ; perimeter
G1 X94.590 Y112.660 E0.00705 ; perimeter
G1 X94.478 Y112.702 E0.00552 ; perimeter
G1 X94.278 Y112.649 E0.00958 ; perimeter
G1 X94.195 Y112.582 E0.00495 ; perimeter
G1 X94.099 Y112.370 E0.01081 ; perimeter
G1 X94.086 Y112.302 E0.00319 ; perimeter
G1 X94.096 Y112.061 E0.01119 ; perimeter
G1 X94.176 Y111.836 E0.01104 ; perimeter
G1 X94.346 Y111.672 E0.01096 ; perimeter
G1 X94.389 Y111.646 E0.00231 ; perimeter
G1 X94.564 Y111.621 E0.00817 ; perimeter
G1 X94.624 Y111.734 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.692 Y111.708 E-0.04103 ; wipe and retract
G1 X94.839 Y112.064 E-0.10155 ; wipe and retract
G1 X94.847 Y112.195 E-0.03460 ; wipe and retract
G1 X94.700 Y112.555 E-0.10272 ; wipe and retract
G1 X94.590 Y112.660 E-0.04017 ; wipe and retract
G1 X94.478 Y112.702 E-0.03145 ; wipe and retract
G1 X94.278 Y112.649 E-0.05458 ; wipe and retract
G1 X94.195 Y112.582 E-0.02817 ; wipe and retract
G1 X94.099 Y112.370 E-0.06157 ; wipe and retract
G1 X94.086 Y112.302 E-0.01819 ; wipe and retract
G1 X94.096 Y112.061 E-0.06377 ; wipe and retract
G1 X94.176 Y111.836 E-0.06289 ; wipe and retract
G1 X94.346 Y111.672 E-0.06244 ; wipe and retract
G1 X94.389 Y111.646 E-0.01318 ; wipe and retract
G1 X94.564 Y111.621 E-0.04657 ; wipe and retract
;WIPE_END
G1 E-1.63712 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X95.041 Y115.110 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.218 Y115.107 E0.00822 ; perimeter
G1 X95.319 Y115.151 E0.00510 ; perimeter
G1 X95.589 Y115.219 E0.01288 ; perimeter
G1 X95.950 Y115.392 E0.01859 ; perimeter
G1 X96.101 Y115.532 E0.00952 ; perimeter
G1 X96.170 Y115.695 E0.00821 ; perimeter
G1 X96.160 Y115.803 E0.00502 ; perimeter
G1 X96.076 Y115.978 E0.00895 ; perimeter
G1 X95.927 Y116.080 E0.00836 ; perimeter
G1 X95.662 Y116.125 E0.01247 ; perimeter
G1 X95.340 Y116.052 E0.01531 ; perimeter
G1 X95.043 Y115.804 E0.01792 ; perimeter
G1 X94.948 Y115.641 E0.00874 ; perimeter
G1 X94.869 Y115.376 E0.01280 ; perimeter
G1 X94.905 Y115.200 E0.00834 ; perimeter
G1 X94.988 Y115.137 E0.00478 ; perimeter
G1 X95.176 Y115.224 F10800.000 ; move inwards before travel
G1 X95.120 Y115.354 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.198724
G1 F2400.000
G1 X95.638 Y115.872 E0.00950 ; infill
G1 X95.819 Y115.854 F10800.000 ; move to first infill point
;WIDTH:0.125597
G1 F2400.000
G1 X95.119 Y115.360 E0.00589 ; infill
G1 X95.119 Y115.395 F10800.000 ; move to first infill point
;WIDTH:0.407742
G1 F2400.000
G1 X95.533 Y115.662 E0.01495 ; infill
G1 X95.899 Y115.789 E0.01177 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.533 Y115.662 E-0.10235 ; wipe and retract
G1 X95.119 Y115.395 E-0.13003 ; wipe and retract
;WIPE_END
G1 E-2.16763 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X103.425 Y116.002 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.358 Y115.871 E0.00683 ; perimeter
G1 X103.382 Y115.622 E0.01157 ; perimeter
G1 X103.427 Y115.522 E0.00507 ; perimeter
G1 X103.512 Y115.445 E0.00533 ; perimeter
G1 X103.742 Y115.382 E0.01106 ; perimeter
G1 X104.051 Y115.430 E0.01448 ; perimeter
G1 X104.170 Y115.509 E0.00662 ; perimeter
G1 X104.250 Y115.703 E0.00969 ; perimeter
G1 X104.223 Y115.936 E0.01089 ; perimeter
G1 X104.160 Y116.037 E0.00553 ; perimeter
G1 X103.992 Y116.136 E0.00901 ; perimeter
G1 X103.779 Y116.153 E0.00988 ; perimeter
G1 X103.517 Y116.082 E0.01260 ; perimeter
G1 X103.474 Y116.037 E0.00289 ; perimeter
G1 X103.474 Y115.863 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.358 Y115.871 E-0.05341 ; wipe and retract
G1 X103.382 Y115.622 E-0.06592 ; wipe and retract
G1 X103.427 Y115.522 E-0.02886 ; wipe and retract
G1 X103.512 Y115.445 E-0.03039 ; wipe and retract
G1 X103.742 Y115.382 E-0.06301 ; wipe and retract
G1 X104.051 Y115.430 E-0.08247 ; wipe and retract
G1 X104.170 Y115.509 E-0.03772 ; wipe and retract
G1 X104.250 Y115.703 E-0.05521 ; wipe and retract
G1 X104.223 Y115.936 E-0.06202 ; wipe and retract
G1 X104.160 Y116.037 E-0.03148 ; wipe and retract
G1 X103.992 Y116.136 E-0.05132 ; wipe and retract
G1 X103.779 Y116.153 E-0.05630 ; wipe and retract
G1 X103.517 Y116.082 E-0.07175 ; wipe and retract
G1 X103.474 Y116.037 E-0.01648 ; wipe and retract
;WIPE_END
G1 E-1.69366 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X114.671 Y115.391 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.743 Y115.148 E0.01173 ; perimeter
G1 X114.881 Y115.028 E0.00846 ; perimeter
G1 X115.053 Y114.990 E0.00816 ; perimeter
G1 X115.205 Y115.014 E0.00716 ; perimeter
G1 X115.363 Y115.141 E0.00937 ; perimeter
G1 X115.444 Y115.313 E0.00883 ; perimeter
G1 X115.439 Y115.451 E0.00636 ; perimeter
G1 X115.399 Y115.557 E0.00529 ; perimeter
G1 X115.309 Y115.706 E0.00805 ; perimeter
G1 X115.235 Y115.759 E0.00419 ; perimeter
G1 X115.092 Y115.794 E0.00684 ; perimeter
G1 X114.829 Y115.744 E0.01241 ; perimeter
G1 X114.756 Y115.685 E0.00433 ; perimeter
G1 X114.688 Y115.449 E0.01140 ; perimeter
G1 X114.897 Y115.276 F10800.000 ; move inwards before travel
G1 X115.064 Y115.384 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.309583
G1 F2400.000
G1 X115.057 Y115.359 E0.00058 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.064 Y115.384 E-0.00693 ; wipe and retract
;WIPE_END
G1 E-2.39307 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 X115.544 Y110.565 ; move to first perimeter point
G1 Z3.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.695 Y110.630 E0.00761 ; perimeter
G1 X115.766 Y110.702 E0.00468 ; perimeter
G1 X115.824 Y110.803 E0.00543 ; perimeter
G1 X115.858 Y110.913 E0.00529 ; perimeter
G1 X115.860 Y111.170 E0.01194 ; perimeter
G1 X115.793 Y111.332 E0.00808 ; perimeter
G1 X115.676 Y111.452 E0.00779 ; perimeter
G1 X115.494 Y111.515 E0.00895 ; perimeter
G1 X115.376 Y111.510 E0.00545 ; perimeter
G1 X115.275 Y111.459 E0.00524 ; perimeter
G1 X115.206 Y111.396 E0.00433 ; perimeter
G1 X115.103 Y111.233 E0.00896 ; perimeter
G1 X115.058 Y111.084 E0.00718 ; perimeter
G1 X115.063 Y110.933 E0.00702 ; perimeter
G1 X115.095 Y110.845 E0.00434 ; perimeter
G1 X115.238 Y110.651 E0.01114 ; perimeter
G1 X115.380 Y110.572 E0.00754 ; perimeter
G1 X115.484 Y110.567 E0.00483 ; perimeter
G1 X115.600 Y110.720 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:3.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.695 Y110.630 E-0.05804 ; wipe and retract
G1 X115.766 Y110.702 E-0.02666 ; wipe and retract
G1 X115.824 Y110.803 E-0.03092 ; wipe and retract
G1 X115.858 Y110.913 E-0.03015 ; wipe and retract
G1 X115.860 Y111.170 E-0.06805 ; wipe and retract
G1 X115.793 Y111.332 E-0.04603 ; wipe and retract
G1 X115.676 Y111.452 E-0.04439 ; wipe and retract
G1 X115.494 Y111.515 E-0.05099 ; wipe and retract
G1 X115.376 Y111.510 E-0.03106 ; wipe and retract
G1 X115.275 Y111.459 E-0.02985 ; wipe and retract
G1 X115.206 Y111.396 E-0.02467 ; wipe and retract
G1 X115.103 Y111.233 E-0.05103 ; wipe and retract
G1 X115.058 Y111.084 E-0.04091 ; wipe and retract
G1 X115.063 Y110.933 E-0.04001 ; wipe and retract
G1 X115.095 Y110.845 E-0.02470 ; wipe and retract
G1 X115.238 Y110.651 E-0.06344 ; wipe and retract
G1 X115.380 Y110.572 E-0.04297 ; wipe and retract
G1 X115.484 Y110.567 E-0.02754 ; wipe and retract
;WIPE_END
G1 E-1.66860 F2400.000 ; retract
G1 Z3.475 F10800.000 ; lift Z
G1 Z3.600 ; move to next layer (17)
;AFTER_LAYER_CHANGE
;3.6
G1 Z3.675 ; lift Z
G1 X115.763 Y99.001 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.869 Y99.352 E0.01698 ; perimeter
G1 X115.938 Y99.976 E0.02907 ; perimeter
G1 X115.874 Y100.535 E0.02607 ; perimeter
G1 X115.755 Y100.943 E0.01966 ; perimeter
G1 X115.615 Y101.160 E0.01198 ; perimeter
G1 X115.542 Y101.196 E0.00377 ; perimeter
G1 X115.470 Y101.135 E0.00439 ; perimeter
G1 X115.334 Y100.876 E0.01356 ; perimeter
G1 X115.235 Y100.357 E0.02443 ; perimeter
G1 X115.169 Y99.790 E0.02647 ; perimeter
G1 X115.126 Y99.709 E0.00424 ; perimeter
G1 X115.019 Y99.193 E0.02440 ; perimeter
G1 X115.069 Y99.022 E0.00823 ; perimeter
G1 X115.021 Y98.885 E0.00675 ; perimeter
G1 X115.019 Y98.671 E0.00991 ; perimeter
G1 X115.082 Y98.343 E0.01548 ; perimeter
G1 X115.175 Y98.245 E0.00625 ; perimeter
G1 X115.365 Y98.368 E0.01050 ; perimeter
G1 X115.518 Y98.561 E0.01141 ; perimeter
G1 X115.731 Y98.951 E0.02058 ; perimeter
G1 X115.537 Y99.290 F10800.000 ; move inwards before travel
G1 X115.408 Y98.880 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.306149
G1 F2400.000
G1 X115.423 Y99.209 E0.00720 ; infill
G1 X115.554 Y99.840 E0.01411 ; infill
G1 X115.564 Y100.135 E0.00646 ; infill
;WIDTH:0.202361
G1 X115.578 Y100.673 E0.00714 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.564 Y100.135 E-0.14209 ; wipe and retract
;WIPE_END
G1 E-2.25791 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X108.208 Y96.880 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.207 Y96.845 E0.00118 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.207 Y96.845 E0.00000 ; wipe and retract
;WIPE_END
G1 E-2.40000 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X112.597 Y95.525 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.805 Y95.384 E0.00851 ; perimeter
G1 X112.933 Y95.400 E0.00438 ; perimeter
G1 X112.978 Y95.422 E0.00169 ; perimeter
G1 X112.654 Y95.507 E0.01133 ; perimeter
G1 X113.919 Y95.393 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X114.243 Y95.153 E0.01368 ; perimeter
G1 X114.255 Y95.432 E0.00946 ; perimeter
G1 X114.239 Y95.523 E0.00313 ; perimeter
G1 X114.024 Y95.394 E0.00847 ; perimeter
G1 X113.979 Y95.394 E0.00154 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.243 Y95.153 E-0.09447 ; wipe and retract
G1 X114.255 Y95.432 E-0.07376 ; wipe and retract
G1 X114.239 Y95.523 E-0.02441 ; wipe and retract
G1 X114.024 Y95.394 E-0.06600 ; wipe and retract
G1 X113.979 Y95.394 E-0.01202 ; wipe and retract
;WIPE_END
G1 E-2.12934 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X109.357 Y96.145 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.948 Y96.347 E0.02115 ; perimeter
G1 X108.853 Y96.586 E0.01187 ; perimeter
G1 X108.780 Y96.653 E0.00461 ; perimeter
G1 X108.654 Y97.072 E0.02026 ; perimeter
G1 X108.485 Y97.323 E0.01402 ; perimeter
G1 X108.330 Y97.414 E0.00833 ; perimeter
G1 X108.212 Y97.428 E0.00551 ; perimeter
G1 X108.071 Y97.365 E0.00715 ; perimeter
G1 X108.003 Y97.360 E0.00315 ; perimeter
G1 X107.880 Y97.274 E0.00697 ; perimeter
G1 X107.754 Y97.057 E0.01165 ; perimeter
G1 X107.669 Y96.774 E0.01366 ; perimeter
G1 X107.734 Y96.593 E0.00893 ; perimeter
G1 X107.820 Y96.504 E0.00574 ; perimeter
G1 X108.115 Y96.348 E0.01548 ; perimeter
G1 X108.274 Y96.329 E0.00740 ; perimeter
G1 X108.539 Y96.203 E0.01357 ; perimeter
G1 X108.751 Y96.193 E0.00986 ; perimeter
G1 X108.972 Y96.113 E0.01086 ; perimeter
G1 X109.273 Y96.062 E0.01415 ; perimeter
G1 X109.394 Y95.943 E0.00788 ; perimeter
G1 X109.745 Y95.790 E0.01769 ; perimeter
G1 X109.993 Y95.775 E0.01151 ; perimeter
G1 X110.252 Y95.797 E0.01208 ; perimeter
G1 X110.362 Y95.842 E0.00547 ; perimeter
G1 X110.670 Y95.877 E0.01439 ; perimeter
G1 X110.735 Y95.916 E0.00351 ; perimeter
G1 X111.143 Y95.911 E0.01887 ; perimeter
G1 X111.538 Y95.730 E0.02013 ; perimeter
G1 X111.733 Y95.583 E0.01134 ; perimeter
G1 X111.881 Y95.508 E0.00769 ; perimeter
G1 X112.239 Y95.197 E0.02193 ; perimeter
G1 X112.271 Y95.143 E0.00291 ; perimeter
G1 X112.496 Y95.014 E0.01203 ; perimeter
G1 X112.590 Y94.932 E0.00579 ; perimeter
G1 X112.783 Y94.896 E0.00910 ; perimeter
G1 X113.076 Y94.931 E0.01365 ; perimeter
G1 X113.321 Y95.056 E0.01276 ; perimeter
G1 X113.694 Y94.959 E0.01782 ; perimeter
G1 X113.974 Y94.747 E0.01631 ; perimeter
G1 X114.251 Y94.614 E0.01421 ; perimeter
G1 X114.391 Y94.606 E0.00648 ; perimeter
G1 X114.565 Y94.692 E0.00903 ; perimeter
G1 X114.641 Y94.791 E0.00578 ; perimeter
G1 X114.691 Y94.912 E0.00608 ; perimeter
G1 X114.740 Y95.197 E0.01337 ; perimeter
G1 X114.737 Y95.478 E0.01304 ; perimeter
G1 X114.707 Y95.640 E0.00758 ; perimeter
G1 X114.693 Y95.899 E0.01202 ; perimeter
G1 X114.661 Y96.023 E0.00594 ; perimeter
G1 X114.576 Y96.109 E0.00560 ; perimeter
G1 X114.436 Y96.117 E0.00652 ; perimeter
G1 X114.336 Y96.056 E0.00541 ; perimeter
G1 X114.066 Y95.982 E0.01297 ; perimeter
G1 X113.889 Y95.875 E0.00955 ; perimeter
G1 X113.521 Y95.874 E0.01706 ; perimeter
G1 X113.263 Y95.847 E0.01203 ; perimeter
G1 X112.795 Y95.968 E0.02241 ; perimeter
G1 X112.128 Y96.181 E0.03242 ; perimeter
G1 X111.511 Y96.439 E0.03099 ; perimeter
G1 X111.353 Y96.471 E0.00746 ; perimeter
G1 X110.724 Y96.701 E0.03105 ; perimeter
G1 X110.460 Y96.700 E0.01220 ; perimeter
G1 X110.140 Y96.646 E0.01502 ; perimeter
G1 X109.924 Y96.530 E0.01138 ; perimeter
G1 X109.762 Y96.482 E0.00784 ; perimeter
G1 X109.639 Y96.380 E0.00739 ; perimeter
G1 X109.517 Y96.366 E0.00569 ; perimeter
G1 X109.392 Y96.193 E0.00988 ; perimeter
G1 X109.131 Y95.814 F10800.000 ; move inwards before travel
G1 X109.803 Y96.028 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.378967
G1 F2400.000
G1 X110.237 Y96.233 E0.01340 ; infill
;WIDTH:0.388713
G1 X110.281 Y96.250 E0.00137 ; infill
;WIDTH:0.40045
G1 X110.496 Y96.280 E0.00645 ; infill
G1 X111.080 Y96.314 E0.01738 ; infill
G1 X110.587 Y96.297 F10800.000 ; move to first infill point
;WIDTH:0.293726
G1 F2400.000
G1 X110.655 Y96.309 E0.00145 ; infill
G1 X110.935 Y96.258 E0.00592 ; infill
;WIDTH:0.162095
G1 X111.276 Y96.180 E0.00346 ; infill
;WIDTH:0.195736
G1 X111.417 Y96.134 E0.00189 ; infill
;WIDTH:0.207883
G1 X111.712 Y96.004 E0.00442 ; infill
;WIDTH:0.237937
G1 X111.816 Y95.944 E0.00196 ; infill
;WIDTH:0.267993
G1 X111.921 Y95.884 E0.00226 ; infill
;WIDTH:0.275516
G1 X112.009 Y95.843 E0.00187 ; infill
;WIDTH:0.286414
G1 X112.072 Y95.818 E0.00137 ; infill
;WIDTH:0.295086
G1 X112.396 Y95.661 E0.00756 ; infill
G1 X113.660 Y95.287 F10800.000 ; move to first infill point
;WIDTH:0.128161
G1 F2400.000
G1 X113.667 Y95.537 E0.00177 ; infill
G1 X113.651 Y95.566 E0.00024 ; infill
G1 X113.369 Y95.593 E0.00201 ; infill
G1 X113.399 Y95.619 F10800.000 ; move to first infill point
;WIDTH:0.226221
G1 F2400.000
G1 X113.555 Y95.332 E0.00497 ; infill
;WIDTH:0.125292
G1 X113.610 Y95.273 E0.00056 ; infill
G1 X113.700 Y95.229 E0.00068 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.610 Y95.273 E-0.02633 ; wipe and retract
G1 X113.555 Y95.332 E-0.02155 ; wipe and retract
;WIPE_END
G1 E-2.35212 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X105.638 Y98.263 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.673 Y98.399 E0.00651 ; perimeter
G1 X105.661 Y98.572 E0.00801 ; perimeter
G1 X105.441 Y98.965 E0.02089 ; perimeter
G1 X105.126 Y99.314 E0.02178 ; perimeter
G1 X104.944 Y99.564 E0.01429 ; perimeter
G1 X104.783 Y99.695 E0.00967 ; perimeter
G1 X104.453 Y100.077 E0.02337 ; perimeter
G1 X104.032 Y100.445 E0.02586 ; perimeter
G1 X103.891 Y100.506 E0.00713 ; perimeter
G1 X103.625 Y100.708 E0.01547 ; perimeter
G1 X103.401 Y100.782 E0.01091 ; perimeter
G1 X103.223 Y100.881 E0.00946 ; perimeter
G1 X103.010 Y100.953 E0.01042 ; perimeter
G1 X102.810 Y100.976 E0.00932 ; perimeter
G1 X102.716 Y101.028 E0.00496 ; perimeter
G1 X102.621 Y101.050 E0.00450 ; perimeter
G1 X102.337 Y101.035 E0.01320 ; perimeter
G1 X102.225 Y100.960 E0.00622 ; perimeter
G1 X102.333 Y100.694 E0.01330 ; perimeter
G1 X102.626 Y100.359 E0.02063 ; perimeter
G1 X102.942 Y100.122 E0.01829 ; perimeter
G1 X103.281 Y99.928 E0.01808 ; perimeter
G1 X103.741 Y99.628 E0.02542 ; perimeter
G1 X104.573 Y98.802 E0.05435 ; perimeter
G1 X104.855 Y98.575 E0.01678 ; perimeter
G1 X105.339 Y98.287 E0.02607 ; perimeter
G1 X105.594 Y98.233 E0.01207 ; perimeter
G1 X105.606 Y98.400 F10800.000 ; move inwards before travel
G1 X105.366 Y98.611 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.265193
G1 F2400.000
G1 X105.057 Y98.864 E0.00738 ; infill
G1 X104.826 Y99.084 E0.00589 ; infill
;WIDTH:0.359671
G1 X104.652 Y99.287 E0.00704 ; infill
G1 X104.519 Y99.406 E0.00469 ; infill
;WIDTH:0.342213
G1 X104.162 Y99.788 E0.01302 ; infill
G1 X103.805 Y100.086 E0.01157 ; infill
G1 X103.427 Y100.330 E0.01120 ; infill
G1 X103.227 Y100.421 E0.00547 ; infill
G1 X102.586 Y100.772 E0.01819 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.227 Y100.421 E-0.19293 ; wipe and retract
G1 X103.427 Y100.330 E-0.05797 ; wipe and retract
G1 X103.805 Y100.086 E-0.11878 ; wipe and retract
G1 X104.162 Y99.788 E-0.12270 ; wipe and retract
G1 X104.519 Y99.406 E-0.13808 ; wipe and retract
;WIPE_END
G1 E-1.76955 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X100.554 Y103.116 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.594 Y103.197 E0.00419 ; perimeter
G1 X100.651 Y103.455 E0.01222 ; perimeter
G1 X100.580 Y103.809 E0.01671 ; perimeter
G1 X100.492 Y103.940 E0.00733 ; perimeter
G1 X100.359 Y104.041 E0.00775 ; perimeter
G1 X100.163 Y104.114 E0.00965 ; perimeter
G1 X99.792 Y104.386 E0.02133 ; perimeter
G1 X99.551 Y104.782 E0.02148 ; perimeter
G1 X99.376 Y104.948 E0.01115 ; perimeter
G1 X99.316 Y104.976 E0.00307 ; perimeter
G1 X99.086 Y104.997 E0.01069 ; perimeter
G1 X98.873 Y104.924 E0.01046 ; perimeter
G1 X98.752 Y104.798 E0.00809 ; perimeter
G1 X98.699 Y104.557 E0.01143 ; perimeter
G1 X98.763 Y104.339 E0.01052 ; perimeter
G1 X98.843 Y104.252 E0.00549 ; perimeter
G1 X98.934 Y104.196 E0.00495 ; perimeter
G1 X99.479 Y104.006 E0.02673 ; perimeter
G1 X99.753 Y103.710 E0.01868 ; perimeter
G1 X99.925 Y103.307 E0.02027 ; perimeter
G1 X100.020 Y103.151 E0.00847 ; perimeter
G1 X100.118 Y103.075 E0.00575 ; perimeter
G1 X100.248 Y103.031 E0.00634 ; perimeter
G1 X100.512 Y103.073 E0.01240 ; perimeter
G1 X100.532 Y103.204 F10800.000 ; move inwards before travel
G1 X100.255 Y103.283 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.248504
G1 F2400.000
G1 X100.281 Y103.383 E0.00176 ; infill
G1 X100.091 Y103.884 E0.00915 ; infill
G1 X99.795 Y104.055 F10800.000 ; move to first infill point
;WIDTH:0.143039
G1 F2400.000
G1 X99.995 Y103.877 E0.00223 ; infill
;WIDTH:0.155807
G1 X100.015 Y103.854 E0.00028 ; infill
;WIDTH:0.167175
G1 X100.396 Y103.439 E0.00583 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.015 Y103.854 E-0.14883 ; wipe and retract
;WIPE_END
G1 E-2.25117 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X97.935 Y105.930 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.990 Y106.069 E0.00697 ; perimeter
G1 X97.978 Y106.192 E0.00570 ; perimeter
G1 X97.903 Y106.393 E0.00993 ; perimeter
G1 X97.750 Y106.546 E0.01005 ; perimeter
G1 X97.594 Y106.603 E0.00770 ; perimeter
G1 X97.016 Y106.741 E0.02752 ; perimeter
G1 X96.757 Y106.956 E0.01558 ; perimeter
G1 X96.544 Y107.410 E0.02321 ; perimeter
G1 X96.567 Y107.627 E0.01012 ; perimeter
G1 X96.527 Y107.854 E0.01066 ; perimeter
G1 X96.373 Y108.122 E0.01431 ; perimeter
G1 X96.218 Y108.252 E0.00940 ; perimeter
G1 X96.003 Y108.329 E0.01057 ; perimeter
G1 X95.859 Y108.300 E0.00681 ; perimeter
G1 X95.816 Y108.309 E0.00205 ; perimeter
G1 X95.617 Y108.238 E0.00978 ; perimeter
G1 X95.528 Y108.059 E0.00924 ; perimeter
G1 X95.562 Y107.775 E0.01325 ; perimeter
G1 X95.734 Y107.507 E0.01477 ; perimeter
G1 X95.811 Y107.431 E0.00500 ; perimeter
G1 X95.857 Y107.422 E0.00218 ; perimeter
G1 X96.148 Y107.167 E0.01792 ; perimeter
G1 X96.477 Y106.948 E0.01832 ; perimeter
G1 X96.735 Y106.592 E0.02038 ; perimeter
G1 X96.841 Y106.308 E0.01403 ; perimeter
G1 X97.005 Y106.107 E0.01200 ; perimeter
G1 X97.076 Y105.989 E0.00637 ; perimeter
G1 X97.238 Y105.850 E0.00992 ; perimeter
G1 X97.372 Y105.781 E0.00700 ; perimeter
G1 X97.479 Y105.798 E0.00499 ; perimeter
G1 X97.688 Y105.783 E0.00974 ; perimeter
G1 X97.782 Y105.817 E0.00460 ; perimeter
G1 X97.886 Y105.894 E0.00601 ; perimeter
G1 X97.869 Y106.065 F10800.000 ; move inwards before travel
G1 X97.032 Y106.490 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.275132
G1 F2400.000
G1 X97.685 Y106.045 E0.01525 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.032 Y106.490 E-0.20836 ; wipe and retract
;WIPE_END
G1 E-2.19164 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X94.694 Y111.875 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.828 Y112.171 E0.01505 ; perimeter
G1 X94.830 Y112.236 E0.00302 ; perimeter
G1 X94.788 Y112.342 E0.00525 ; perimeter
G1 X94.739 Y112.578 E0.01117 ; perimeter
G1 X94.615 Y112.769 E0.01054 ; perimeter
G1 X94.503 Y112.821 E0.00574 ; perimeter
G1 X94.279 Y112.786 E0.01050 ; perimeter
G1 X94.167 Y112.681 E0.00711 ; perimeter
G1 X94.086 Y112.392 E0.01390 ; perimeter
G1 X94.089 Y112.196 E0.00908 ; perimeter
G1 X94.175 Y111.947 E0.01219 ; perimeter
G1 X94.292 Y111.841 E0.00732 ; perimeter
G1 X94.490 Y111.775 E0.00967 ; perimeter
G1 X94.561 Y111.792 E0.00336 ; perimeter
G1 X94.643 Y111.844 E0.00451 ; perimeter
G1 X94.570 Y112.175 F10800.000 ; move inwards before travel
G1 X94.500 Y112.038 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.203019
G1 F2400.000
G1 X94.420 Y112.564 E0.00708 ; infill
G1 X94.410 Y112.562 F10800.000 ; move to first infill point
;WIDTH:0.269884
G1 F2400.000
G1 X94.443 Y112.260 E0.00574 ; infill
G1 X94.514 Y112.062 E0.00398 ; infill
G1 X94.475 Y112.034 F10800.000 ; move to first infill point
;WIDTH:0.20999
G1 F2400.000
G1 X94.373 Y112.522 E0.00692 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.475 Y112.034 E-0.13138 ; wipe and retract
;WIPE_END
G1 E-2.26862 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X96.070 Y116.012 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.921 Y116.101 E0.00804 ; perimeter
G1 X95.712 Y116.132 E0.00980 ; perimeter
G1 X95.332 Y116.052 E0.01799 ; perimeter
G1 X94.963 Y115.765 E0.02164 ; perimeter
G1 X94.841 Y115.612 E0.00907 ; perimeter
G1 X94.711 Y115.246 E0.01799 ; perimeter
G1 X94.735 Y115.070 E0.00820 ; perimeter
G1 X94.776 Y115.017 E0.00312 ; perimeter
G1 X94.870 Y114.975 E0.00478 ; perimeter
G1 X95.086 Y114.972 E0.00998 ; perimeter
G1 X95.330 Y115.080 E0.01238 ; perimeter
G1 X95.972 Y115.416 E0.03356 ; perimeter
G1 X96.126 Y115.552 E0.00948 ; perimeter
G1 X96.171 Y115.666 E0.00572 ; perimeter
G1 X96.106 Y115.964 E0.01411 ; perimeter
G1 X95.900 Y115.977 F10800.000 ; move inwards before travel
G1 X95.898 Y115.831 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.213412
G1 F2400.000
G1 X95.802 Y115.766 E0.00164 ; infill
;WIDTH:0.306465
G1 X95.620 Y115.694 E0.00430 ; infill
;WIDTH:0.410567
G1 X95.515 Y115.656 E0.00338 ; infill
G1 X95.252 Y115.487 E0.00957 ; infill
;WIDTH:0.381398
G1 X94.989 Y115.317 E0.00881 ; infill
G1 X94.973 Y115.269 F10800.000 ; move to first infill point
;WIDTH:0.311919
G1 F2400.000
G1 X95.768 Y115.880 E0.02242 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.973 Y115.269 E-0.26447 ; wipe and retract
;WIPE_END
G1 E-2.13553 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X103.354 Y115.877 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.365 Y115.766 E0.00516 ; perimeter
G1 X103.450 Y115.553 E0.01064 ; perimeter
G1 X103.593 Y115.430 E0.00870 ; perimeter
G1 X103.790 Y115.380 E0.00943 ; perimeter
G1 X104.165 Y115.449 E0.01764 ; perimeter
G1 X104.228 Y115.511 E0.00411 ; perimeter
G1 X104.325 Y115.733 E0.01124 ; perimeter
G1 X104.306 Y115.894 E0.00749 ; perimeter
G1 X104.208 Y116.055 E0.00873 ; perimeter
G1 X104.080 Y116.145 E0.00724 ; perimeter
G1 X103.811 Y116.158 E0.01247 ; perimeter
G1 X103.506 Y116.083 E0.01456 ; perimeter
G1 X103.415 Y115.994 E0.00589 ; perimeter
G1 X103.382 Y115.931 E0.00331 ; perimeter
G1 X103.442 Y115.808 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.365 Y115.766 E-0.04354 ; wipe and retract
G1 X103.450 Y115.553 E-0.06062 ; wipe and retract
G1 X103.593 Y115.430 E-0.04957 ; wipe and retract
G1 X103.790 Y115.380 E-0.05372 ; wipe and retract
G1 X104.165 Y115.449 E-0.10049 ; wipe and retract
G1 X104.228 Y115.511 E-0.02342 ; wipe and retract
G1 X104.325 Y115.733 E-0.06405 ; wipe and retract
G1 X104.306 Y115.894 E-0.04268 ; wipe and retract
G1 X104.208 Y116.055 E-0.04975 ; wipe and retract
G1 X104.080 Y116.145 E-0.04126 ; wipe and retract
G1 X103.811 Y116.158 E-0.07104 ; wipe and retract
G1 X103.506 Y116.083 E-0.08293 ; wipe and retract
G1 X103.415 Y115.994 E-0.03353 ; wipe and retract
G1 X103.382 Y115.931 E-0.01884 ; wipe and retract
;WIPE_END
G1 E-1.66454 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X114.671 Y115.388 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.745 Y115.143 E0.01185 ; perimeter
G1 X114.869 Y115.035 E0.00762 ; perimeter
G1 X115.088 Y114.994 E0.01032 ; perimeter
G1 X115.213 Y115.016 E0.00590 ; perimeter
G1 X115.355 Y115.129 E0.00842 ; perimeter
G1 X115.443 Y115.320 E0.00972 ; perimeter
G1 X115.440 Y115.451 E0.00606 ; perimeter
G1 X115.397 Y115.561 E0.00548 ; perimeter
G1 X115.308 Y115.707 E0.00790 ; perimeter
G1 X115.242 Y115.756 E0.00384 ; perimeter
G1 X115.088 Y115.792 E0.00728 ; perimeter
G1 X114.830 Y115.741 E0.01222 ; perimeter
G1 X114.741 Y115.670 E0.00528 ; perimeter
G1 X114.686 Y115.446 E0.01067 ; perimeter
G1 X114.899 Y115.272 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.745 Y115.143 E-0.08153 ; wipe and retract
G1 X114.869 Y115.035 E-0.04341 ; wipe and retract
G1 X115.088 Y114.994 E-0.05880 ; wipe and retract
G1 X115.213 Y115.016 E-0.03359 ; wipe and retract
G1 X115.355 Y115.129 E-0.04799 ; wipe and retract
G1 X115.443 Y115.320 E-0.05536 ; wipe and retract
G1 X115.440 Y115.451 E-0.03454 ; wipe and retract
G1 X115.397 Y115.561 E-0.03119 ; wipe and retract
G1 X115.308 Y115.707 E-0.04498 ; wipe and retract
G1 X115.242 Y115.756 E-0.02186 ; wipe and retract
G1 X115.088 Y115.792 E-0.04149 ; wipe and retract
G1 X114.830 Y115.741 E-0.06961 ; wipe and retract
G1 X114.741 Y115.670 E-0.03008 ; wipe and retract
G1 X114.686 Y115.446 E-0.06076 ; wipe and retract
;WIPE_END
G1 E-1.74480 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 X115.682 Y111.355 ; move to first perimeter point
G1 Z3.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.499 Y111.418 E0.00900 ; perimeter
G1 X115.387 Y111.411 E0.00520 ; perimeter
G1 X115.278 Y111.360 E0.00556 ; perimeter
G1 X115.171 Y111.253 E0.00702 ; perimeter
G1 X115.073 Y111.063 E0.00988 ; perimeter
G1 X115.062 Y110.870 E0.00895 ; perimeter
G1 X115.110 Y110.737 E0.00656 ; perimeter
G1 X115.254 Y110.548 E0.01100 ; perimeter
G1 X115.423 Y110.466 E0.00870 ; perimeter
G1 X115.530 Y110.465 E0.00496 ; perimeter
G1 X115.659 Y110.511 E0.00636 ; perimeter
G1 X115.736 Y110.573 E0.00458 ; perimeter
G1 X115.856 Y110.785 E0.01127 ; perimeter
G1 X115.862 Y111.073 E0.01338 ; perimeter
G1 X115.799 Y111.229 E0.00777 ; perimeter
G1 X115.727 Y111.314 E0.00519 ; perimeter
G1 X115.511 Y111.263 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:3.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.499 Y111.418 E-0.06604 ; wipe and retract
G1 X115.387 Y111.411 E-0.02962 ; wipe and retract
G1 X115.278 Y111.360 E-0.03170 ; wipe and retract
G1 X115.171 Y111.253 E-0.03997 ; wipe and retract
G1 X115.073 Y111.063 E-0.05630 ; wipe and retract
G1 X115.062 Y110.870 E-0.05098 ; wipe and retract
G1 X115.110 Y110.737 E-0.03735 ; wipe and retract
G1 X115.254 Y110.548 E-0.06268 ; wipe and retract
G1 X115.423 Y110.466 E-0.04958 ; wipe and retract
G1 X115.530 Y110.465 E-0.02823 ; wipe and retract
G1 X115.659 Y110.511 E-0.03625 ; wipe and retract
G1 X115.736 Y110.573 E-0.02609 ; wipe and retract
G1 X115.856 Y110.785 E-0.06418 ; wipe and retract
G1 X115.862 Y111.073 E-0.07624 ; wipe and retract
G1 X115.799 Y111.229 E-0.04426 ; wipe and retract
G1 X115.727 Y111.314 E-0.02954 ; wipe and retract
;WIPE_END
G1 E-1.67100 F2400.000 ; retract
G1 Z3.675 F10800.000 ; lift Z
G1 Z3.800 ; move to next layer (18)
;AFTER_LAYER_CHANGE
;3.8
G1 X115.671 Y111.264 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.501 Y111.322 E0.00829 ; perimeter
G1 X115.403 Y111.317 E0.00455 ; perimeter
G1 X115.275 Y111.259 E0.00653 ; perimeter
G1 X115.160 Y111.138 E0.00770 ; perimeter
G1 X115.081 Y110.976 E0.00836 ; perimeter
G1 X115.069 Y110.769 E0.00959 ; perimeter
G1 X115.123 Y110.627 E0.00705 ; perimeter
G1 X115.284 Y110.431 E0.01177 ; perimeter
G1 X115.419 Y110.369 E0.00687 ; perimeter
G1 X115.522 Y110.367 E0.00475 ; perimeter
G1 X115.669 Y110.423 E0.00732 ; perimeter
G1 X115.756 Y110.499 E0.00535 ; perimeter
G1 X115.855 Y110.692 E0.01002 ; perimeter
G1 X115.860 Y110.992 E0.01394 ; perimeter
G1 X115.800 Y111.134 E0.00713 ; perimeter
G1 X115.713 Y111.221 E0.00569 ; perimeter
G1 X115.514 Y111.177 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.501 Y111.322 E-0.06184 ; wipe and retract
G1 X115.403 Y111.317 E-0.02591 ; wipe and retract
G1 X115.275 Y111.259 E-0.03723 ; wipe and retract
G1 X115.160 Y111.138 E-0.04389 ; wipe and retract
G1 X115.081 Y110.976 E-0.04765 ; wipe and retract
G1 X115.069 Y110.769 E-0.05462 ; wipe and retract
G1 X115.123 Y110.627 E-0.04017 ; wipe and retract
G1 X115.284 Y110.431 E-0.06703 ; wipe and retract
G1 X115.419 Y110.369 E-0.03914 ; wipe and retract
G1 X115.522 Y110.367 E-0.02704 ; wipe and retract
G1 X115.669 Y110.423 E-0.04168 ; wipe and retract
G1 X115.756 Y110.499 E-0.03047 ; wipe and retract
G1 X115.855 Y110.692 E-0.05711 ; wipe and retract
G1 X115.860 Y110.992 E-0.07942 ; wipe and retract
G1 X115.800 Y111.134 E-0.04060 ; wipe and retract
G1 X115.713 Y111.221 E-0.03243 ; wipe and retract
;WIPE_END
G1 E-1.67376 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X115.092 Y114.993 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.221 Y115.017 E0.00609 ; perimeter
G1 X115.363 Y115.130 E0.00841 ; perimeter
G1 X115.441 Y115.318 E0.00940 ; perimeter
G1 X115.440 Y115.452 E0.00621 ; perimeter
G1 X115.396 Y115.565 E0.00565 ; perimeter
G1 X115.307 Y115.707 E0.00775 ; perimeter
G1 X115.248 Y115.753 E0.00349 ; perimeter
G1 X115.078 Y115.792 E0.00804 ; perimeter
G1 X114.855 Y115.756 E0.01046 ; perimeter
G1 X114.746 Y115.670 E0.00647 ; perimeter
G1 X114.672 Y115.381 E0.01381 ; perimeter
G1 X114.747 Y115.138 E0.01179 ; perimeter
G1 X114.878 Y115.023 E0.00805 ; perimeter
G1 X115.033 Y115.001 E0.00725 ; perimeter
G1 X115.159 Y115.106 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.221 Y115.017 E-0.04997 ; wipe and retract
G1 X115.363 Y115.130 E-0.04789 ; wipe and retract
G1 X115.441 Y115.318 E-0.05358 ; wipe and retract
G1 X115.440 Y115.452 E-0.03539 ; wipe and retract
G1 X115.396 Y115.565 E-0.03219 ; wipe and retract
G1 X115.307 Y115.707 E-0.04416 ; wipe and retract
G1 X115.248 Y115.753 E-0.01986 ; wipe and retract
G1 X115.078 Y115.792 E-0.04579 ; wipe and retract
G1 X114.855 Y115.756 E-0.05960 ; wipe and retract
G1 X114.746 Y115.670 E-0.03686 ; wipe and retract
G1 X114.672 Y115.381 E-0.07869 ; wipe and retract
G1 X114.747 Y115.138 E-0.06717 ; wipe and retract
G1 X114.878 Y115.023 E-0.04586 ; wipe and retract
G1 X115.033 Y115.001 E-0.04129 ; wipe and retract
;WIPE_END
G1 E-1.74168 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X104.431 Y115.720 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.413 Y115.840 E0.00562 ; perimeter
G1 X104.347 Y116.022 E0.00897 ; perimeter
G1 X104.256 Y116.111 E0.00589 ; perimeter
G1 X104.147 Y116.156 E0.00544 ; perimeter
G1 X103.801 Y116.163 E0.01604 ; perimeter
G1 X103.499 Y116.086 E0.01445 ; perimeter
G1 X103.357 Y115.960 E0.00876 ; perimeter
G1 X103.321 Y115.875 E0.00430 ; perimeter
G1 X103.345 Y115.656 E0.01022 ; perimeter
G1 X103.378 Y115.593 E0.00329 ; perimeter
G1 X103.596 Y115.483 E0.01130 ; perimeter
G1 X103.669 Y115.420 E0.00446 ; perimeter
G1 X103.751 Y115.390 E0.00406 ; perimeter
G1 X103.952 Y115.385 E0.00932 ; perimeter
G1 X104.279 Y115.470 E0.01564 ; perimeter
G1 X104.362 Y115.555 E0.00550 ; perimeter
G1 X104.413 Y115.663 E0.00554 ; perimeter
G1 X104.331 Y115.789 F10800.000 ; move inwards before travel
G1 X104.183 Y115.734 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.151733
G1 F2400.000
G1 X104.085 Y115.772 E0.00095 ; infill
;WIDTH:0.249895
G1 X104.043 Y115.795 E0.00083 ; infill
G1 X103.853 Y115.775 E0.00329 ; infill
G1 X103.582 Y115.824 E0.00475 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.853 Y115.775 E-0.07283 ; wipe and retract
G1 X104.043 Y115.795 E-0.05042 ; wipe and retract
G1 X104.085 Y115.772 E-0.01267 ; wipe and retract
;WIPE_END
G1 E-2.26408 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X96.144 Y115.552 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.189 Y115.666 E0.00565 ; perimeter
G1 X96.169 Y115.891 E0.01048 ; perimeter
G1 X96.054 Y116.051 E0.00911 ; perimeter
G1 X95.908 Y116.126 E0.00763 ; perimeter
G1 X95.775 Y116.140 E0.00619 ; perimeter
G1 X95.398 Y116.060 E0.01783 ; perimeter
G1 X94.978 Y115.769 E0.02367 ; perimeter
G1 X94.855 Y115.667 E0.00744 ; perimeter
G1 X94.691 Y115.484 E0.01136 ; perimeter
G1 X94.547 Y115.105 E0.01876 ; perimeter
G1 X94.556 Y114.909 E0.00909 ; perimeter
G1 X94.628 Y114.801 E0.00603 ; perimeter
G1 X94.654 Y114.819 E0.00145 ; perimeter
G1 X94.737 Y114.777 E0.00428 ; perimeter
G1 X94.920 Y114.822 E0.00877 ; perimeter
G1 X95.192 Y114.936 E0.01365 ; perimeter
G1 X95.446 Y115.130 E0.01480 ; perimeter
G1 X96.051 Y115.448 E0.03169 ; perimeter
G1 X96.104 Y115.508 E0.00368 ; perimeter
G1 X96.091 Y115.662 F10800.000 ; move inwards before travel
G1 X94.850 Y115.054 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3189
G1 F2400.000
G1 X95.014 Y115.276 E0.00633 ; infill
G1 X95.226 Y115.461 E0.00645 ; infill
G1 X95.561 Y115.665 E0.00900 ; infill
G1 X95.795 Y115.752 E0.00574 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.561 Y115.665 E-0.06602 ; wipe and retract
G1 X95.226 Y115.461 E-0.10348 ; wipe and retract
G1 X95.014 Y115.276 E-0.07413 ; wipe and retract
G1 X94.850 Y115.054 E-0.07281 ; wipe and retract
;WIPE_END
G1 E-2.08357 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X94.804 Y112.219 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.815 Y112.380 E0.00746 ; perimeter
G1 X94.768 Y112.641 E0.01227 ; perimeter
G1 X94.639 Y113.025 E0.01875 ; perimeter
G1 X94.486 Y113.141 E0.00892 ; perimeter
G1 X94.443 Y113.283 E0.00688 ; perimeter
G1 X94.402 Y113.257 E0.00225 ; perimeter
G1 X94.314 Y113.044 E0.01064 ; perimeter
G1 X94.155 Y112.810 E0.01314 ; perimeter
G1 X94.088 Y112.521 E0.01372 ; perimeter
G1 X94.115 Y112.198 E0.01501 ; perimeter
G1 X94.169 Y112.056 E0.00706 ; perimeter
G1 X94.269 Y111.958 E0.00650 ; perimeter
G1 X94.422 Y111.912 E0.00739 ; perimeter
G1 X94.613 Y111.933 E0.00890 ; perimeter
G1 X94.674 Y111.968 E0.00322 ; perimeter
G1 X94.765 Y112.175 E0.01047 ; perimeter
G1 X94.688 Y112.331 F10800.000 ; move inwards before travel
G1 X94.460 Y112.159 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.270119
G1 F2400.000
G1 X94.457 Y112.367 E0.00393 ; infill
G1 X94.407 Y112.751 E0.00733 ; infill
G1 X94.457 Y112.810 F10800.000 ; move to first infill point
;WIDTH:0.228271
G1 F2400.000
G1 X94.443 Y112.242 E0.00875 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.457 Y112.810 E-0.14986 ; wipe and retract
;WIPE_END
G1 E-2.25014 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X96.988 Y106.592 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.002 Y106.343 E0.01154 ; perimeter
G1 X97.110 Y106.081 E0.01315 ; perimeter
G1 X97.185 Y105.957 E0.00671 ; perimeter
G1 X97.273 Y105.877 E0.00551 ; perimeter
G1 X97.436 Y105.792 E0.00853 ; perimeter
G1 X97.791 Y105.768 E0.01645 ; perimeter
G1 X97.918 Y105.821 E0.00641 ; perimeter
G1 X98.023 Y105.927 E0.00691 ; perimeter
G1 X98.090 Y106.081 E0.00778 ; perimeter
G1 X98.084 Y106.184 E0.00476 ; perimeter
G1 X98.005 Y106.375 E0.00956 ; perimeter
G1 X97.855 Y106.515 E0.00951 ; perimeter
G1 X97.559 Y106.607 E0.01441 ; perimeter
G1 X97.271 Y106.588 E0.01335 ; perimeter
G1 X97.195 Y106.609 E0.00366 ; perimeter
G1 X97.042 Y106.565 E0.00735 ; perimeter
G1 X97.120 Y106.380 F10800.000 ; move inwards before travel
G1 X96.466 Y107.256 ; move to first perimeter point
G1 F1800.000
G1 X96.456 Y107.366 E0.00509 ; perimeter
G1 X96.513 Y107.468 E0.00543 ; perimeter
G1 X96.550 Y107.753 E0.01328 ; perimeter
G1 X96.527 Y107.954 E0.00939 ; perimeter
G1 X96.429 Y108.152 E0.01024 ; perimeter
G1 X96.312 Y108.243 E0.00686 ; perimeter
G1 X96.206 Y108.259 E0.00498 ; perimeter
G1 X96.040 Y108.319 E0.00817 ; perimeter
G1 X95.917 Y108.294 E0.00579 ; perimeter
G1 X95.738 Y108.214 E0.00911 ; perimeter
G1 X95.624 Y107.935 E0.01395 ; perimeter
G1 X95.627 Y107.786 E0.00693 ; perimeter
G1 X95.757 Y107.554 E0.01233 ; perimeter
G1 X95.853 Y107.475 E0.00573 ; perimeter
G1 X96.036 Y107.440 E0.00863 ; perimeter
G1 X96.152 Y107.340 E0.00713 ; perimeter
G1 X96.283 Y107.327 E0.00606 ; perimeter
G1 X96.407 Y107.248 E0.00683 ; perimeter
G1 X96.414 Y107.353 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.456 Y107.366 E-0.03359 ; wipe and retract
G1 X96.513 Y107.468 E-0.03093 ; wipe and retract
G1 X96.550 Y107.753 E-0.07563 ; wipe and retract
G1 X96.527 Y107.954 E-0.05350 ; wipe and retract
G1 X96.429 Y108.152 E-0.05836 ; wipe and retract
G1 X96.312 Y108.243 E-0.03907 ; wipe and retract
G1 X96.206 Y108.259 E-0.02837 ; wipe and retract
G1 X96.040 Y108.319 E-0.04656 ; wipe and retract
G1 X95.917 Y108.294 E-0.03300 ; wipe and retract
G1 X95.738 Y108.214 E-0.05189 ; wipe and retract
G1 X95.624 Y107.935 E-0.07944 ; wipe and retract
G1 X95.627 Y107.786 E-0.03946 ; wipe and retract
G1 X95.757 Y107.554 E-0.07026 ; wipe and retract
G1 X95.853 Y107.475 E-0.03265 ; wipe and retract
G1 X96.036 Y107.440 E-0.04914 ; wipe and retract
G1 X96.152 Y107.340 E-0.04063 ; wipe and retract
G1 X96.283 Y107.327 E-0.03453 ; wipe and retract
G1 X96.407 Y107.248 E-0.03893 ; wipe and retract
;WIPE_END
G1 E-1.56407 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X98.935 Y104.958 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.832 Y104.843 E0.00715 ; perimeter
G1 X98.760 Y104.578 E0.01270 ; perimeter
G1 X98.842 Y104.333 E0.01196 ; perimeter
G1 X99.065 Y104.182 E0.01249 ; perimeter
G1 X99.431 Y104.037 E0.01821 ; perimeter
G1 X99.745 Y103.730 E0.02036 ; perimeter
G1 X99.841 Y103.583 E0.00810 ; perimeter
G1 X99.921 Y103.390 E0.00969 ; perimeter
G1 X100.006 Y103.267 E0.00694 ; perimeter
G1 X100.145 Y103.178 E0.00764 ; perimeter
G1 X100.312 Y103.153 E0.00780 ; perimeter
G1 X100.454 Y103.172 E0.00664 ; perimeter
G1 X100.513 Y103.223 E0.00363 ; perimeter
G1 X100.539 Y103.305 E0.00400 ; perimeter
G1 X100.633 Y103.464 E0.00854 ; perimeter
G1 X100.626 Y103.521 E0.00266 ; perimeter
G1 X100.657 Y103.655 E0.00636 ; perimeter
G1 X100.591 Y103.889 E0.01127 ; perimeter
G1 X100.497 Y104.043 E0.00836 ; perimeter
G1 X99.844 Y104.523 E0.03754 ; perimeter
G1 X99.737 Y104.699 E0.00952 ; perimeter
G1 X99.451 Y104.974 E0.01838 ; perimeter
G1 X99.360 Y105.015 E0.00461 ; perimeter
G1 X99.112 Y105.021 E0.01152 ; perimeter
G1 X98.991 Y104.978 E0.00590 ; perimeter
G1 X98.948 Y104.804 F10800.000 ; move inwards before travel
G1 X99.081 Y104.754 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.193279
G1 F2400.000
G1 X99.618 Y104.297 E0.00882 ; infill
;WIDTH:0.229587
G1 X99.814 Y104.130 E0.00400 ; infill
;WIDTH:0.272057
G1 X100.028 Y103.946 E0.00538 ; infill
;WIDTH:0.312469
G1 X100.106 Y103.864 E0.00254 ; infill
;WIDTH:0.352882
G1 X100.184 Y103.781 E0.00292 ; infill
;WIDTH:0.367198
G1 X100.326 Y103.418 E0.01052 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.184 Y103.781 E-0.10292 ; wipe and retract
;WIPE_END
G1 E-2.29708 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X103.944 Y100.053 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.027 Y99.976 E0.00384 ; perimeter
G1 X103.993 Y100.019 E0.00187 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.027 Y99.976 E-0.01457 ; wipe and retract
G1 X103.993 Y100.019 E-0.01457 ; wipe and retract
;WIPE_END
G1 E-2.37086 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X105.355 Y98.536 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.407 Y98.688 E0.00748 ; perimeter
G1 X105.340 Y98.867 E0.00885 ; perimeter
G1 X105.050 Y99.309 E0.02448 ; perimeter
G1 X105.043 Y99.381 E0.00332 ; perimeter
G1 X104.760 Y99.770 E0.02228 ; perimeter
G1 X104.740 Y99.850 E0.00381 ; perimeter
G1 X104.613 Y100.047 E0.01090 ; perimeter
G1 X104.404 Y100.297 E0.01510 ; perimeter
G1 X104.230 Y100.454 E0.01085 ; perimeter
G1 X103.872 Y100.610 E0.01805 ; perimeter
G1 X103.812 Y100.656 E0.00352 ; perimeter
G1 X103.087 Y100.869 E0.03500 ; perimeter
G1 X102.960 Y100.884 E0.00591 ; perimeter
G1 X102.670 Y100.871 E0.01345 ; perimeter
G1 X102.588 Y100.809 E0.00477 ; perimeter
G1 X102.576 Y100.731 E0.00365 ; perimeter
G1 X102.669 Y100.505 E0.01130 ; perimeter
G1 X102.930 Y100.201 E0.01858 ; perimeter
G1 X103.314 Y99.905 E0.02243 ; perimeter
G1 X103.559 Y99.754 E0.01334 ; perimeter
G1 X103.697 Y99.620 E0.00889 ; perimeter
G1 X104.069 Y99.347 E0.02142 ; perimeter
G1 X104.376 Y99.057 E0.01955 ; perimeter
G1 X104.528 Y98.962 E0.00830 ; perimeter
G1 X104.703 Y98.817 E0.01052 ; perimeter
G1 X105.067 Y98.607 E0.01946 ; perimeter
G1 X105.297 Y98.550 E0.01099 ; perimeter
G1 X105.328 Y98.695 F10800.000 ; move inwards before travel
G1 X104.952 Y98.963 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.167447
G1 F2400.000
G1 X104.710 Y99.254 E0.00391 ; infill
;WIDTH:0.276737
G1 X104.410 Y99.573 E0.00851 ; infill
;WIDTH:0.382405
G1 X104.339 Y99.681 E0.00365 ; infill
G1 X104.062 Y99.654 E0.00786 ; infill
G1 X103.603 Y100.011 F10800.000 ; move to first infill point
;WIDTH:0.444714
G1 F2400.000
G1 X103.560 Y100.274 E0.00891 ; infill
G1 X103.216 Y100.456 E0.01300 ; infill
;WIDTH:0.411329
G1 X102.873 Y100.639 E0.01192 ; infill
G1 X102.895 Y100.612 F10800.000 ; move to first infill point
;WIDTH:0.291003
G1 F2400.000
G1 X103.219 Y100.440 E0.00756 ; infill
;WIDTH:0.299726
G1 X103.744 Y100.187 E0.01245 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.219 Y100.440 E-0.15384 ; wipe and retract
;WIPE_END
G1 E-2.24616 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X107.947 Y97.395 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.869 Y97.259 E0.00726 ; perimeter
G1 X107.852 Y97.121 E0.00642 ; perimeter
G1 X107.773 Y96.873 E0.01206 ; perimeter
G1 X107.844 Y96.672 E0.00987 ; perimeter
G1 X107.936 Y96.575 E0.00620 ; perimeter
G1 X108.189 Y96.453 E0.01302 ; perimeter
G1 X108.386 Y96.404 E0.00939 ; perimeter
G1 X108.626 Y96.443 E0.01123 ; perimeter
G1 X108.658 Y96.535 E0.00450 ; perimeter
G1 X108.685 Y96.825 E0.01350 ; perimeter
G1 X108.628 Y97.225 E0.01872 ; perimeter
G1 X108.576 Y97.347 E0.00615 ; perimeter
G1 X108.490 Y97.464 E0.00672 ; perimeter
G1 X108.349 Y97.548 E0.00760 ; perimeter
G1 X108.209 Y97.555 E0.00651 ; perimeter
G1 X108.053 Y97.487 E0.00790 ; perimeter
G1 X107.992 Y97.434 E0.00371 ; perimeter
G1 X108.002 Y97.248 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.869 Y97.259 E-0.05655 ; wipe and retract
G1 X107.852 Y97.121 E-0.03660 ; wipe and retract
G1 X107.773 Y96.873 E-0.06872 ; wipe and retract
G1 X107.844 Y96.672 E-0.05625 ; wipe and retract
G1 X107.936 Y96.575 E-0.03534 ; wipe and retract
G1 X108.189 Y96.453 E-0.07415 ; wipe and retract
G1 X108.386 Y96.404 E-0.05349 ; wipe and retract
G1 X108.626 Y96.443 E-0.06399 ; wipe and retract
G1 X108.658 Y96.535 E-0.02562 ; wipe and retract
G1 X108.685 Y96.825 E-0.07689 ; wipe and retract
G1 X108.628 Y97.225 E-0.10663 ; wipe and retract
G1 X108.576 Y97.347 E-0.03505 ; wipe and retract
G1 X108.490 Y97.464 E-0.03829 ; wipe and retract
G1 X108.349 Y97.548 E-0.04329 ; wipe and retract
G1 X108.209 Y97.555 E-0.03709 ; wipe and retract
G1 X108.053 Y97.487 E-0.04501 ; wipe and retract
G1 X107.992 Y97.434 E-0.02115 ; wipe and retract
;WIPE_END
G1 E-1.52587 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X113.820 Y95.435 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.984 Y95.403 E0.00565 ; perimeter
G1 X114.233 Y95.287 E0.00931 ; perimeter
G1 X114.293 Y95.542 E0.00888 ; perimeter
G1 X114.300 Y95.671 E0.00436 ; perimeter
G1 X114.123 Y95.469 E0.00907 ; perimeter
G1 X113.880 Y95.442 E0.00828 ; perimeter
G1 X113.827 Y95.921 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.258 Y95.858 E0.02653 ; perimeter
G1 X112.742 Y95.987 E0.02464 ; perimeter
G1 X112.373 Y96.114 E0.01805 ; perimeter
G1 X111.689 Y96.451 E0.03536 ; perimeter
G1 X111.406 Y96.553 E0.01391 ; perimeter
G1 X111.282 Y96.659 E0.00756 ; perimeter
G1 X111.117 Y96.738 E0.00848 ; perimeter
G1 X110.863 Y96.826 E0.01243 ; perimeter
G1 X110.643 Y96.825 E0.01021 ; perimeter
G1 X110.533 Y96.774 E0.00561 ; perimeter
G1 X110.338 Y96.742 E0.00915 ; perimeter
G1 X109.938 Y96.496 E0.02175 ; perimeter
G1 X109.803 Y96.382 E0.00818 ; perimeter
G1 X109.694 Y96.222 E0.00899 ; perimeter
G1 X109.662 Y96.083 E0.00657 ; perimeter
G1 X109.738 Y95.989 E0.00558 ; perimeter
G1 X110.001 Y95.856 E0.01366 ; perimeter
G1 X110.167 Y95.845 E0.00771 ; perimeter
G1 X110.878 Y95.892 E0.03300 ; perimeter
G1 X111.080 Y95.827 E0.00984 ; perimeter
G1 X111.237 Y95.827 E0.00728 ; perimeter
G1 X111.923 Y95.480 E0.03561 ; perimeter
G1 X112.127 Y95.310 E0.01228 ; perimeter
G1 X112.526 Y95.088 E0.02117 ; perimeter
G1 X112.716 Y95.044 E0.00901 ; perimeter
G1 X112.989 Y95.024 E0.01270 ; perimeter
G1 X113.332 Y95.041 E0.01588 ; perimeter
G1 X113.820 Y94.944 E0.02308 ; perimeter
G1 X114.000 Y94.848 E0.00943 ; perimeter
G1 X114.238 Y94.774 E0.01154 ; perimeter
G1 X114.362 Y94.770 E0.00577 ; perimeter
G1 X114.539 Y94.853 E0.00904 ; perimeter
G1 X114.621 Y94.944 E0.00571 ; perimeter
G1 X114.675 Y95.057 E0.00577 ; perimeter
G1 X114.773 Y95.474 E0.01985 ; perimeter
G1 X114.803 Y96.075 E0.02787 ; perimeter
G1 X114.765 Y96.419 E0.01601 ; perimeter
G1 X114.734 Y96.518 E0.00483 ; perimeter
G1 X114.671 Y96.525 E0.00293 ; perimeter
G1 X114.369 Y96.346 E0.01628 ; perimeter
G1 X114.290 Y96.235 E0.00627 ; perimeter
G1 X113.995 Y96.055 E0.01602 ; perimeter
G1 X113.886 Y95.930 E0.00770 ; perimeter
G1 X113.728 Y95.534 F10800.000 ; move inwards before travel
G1 X113.580 Y95.446 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.397888
G1 F2400.000
G1 X113.341 Y95.453 E0.00703 ; infill
;WIDTH:0.38444
G1 X112.995 Y95.468 E0.00986 ; infill
;WIDTH:0.483094
G1 X112.785 Y95.501 E0.00775 ; infill
G1 X112.622 Y95.552 E0.00625 ; infill
;WIDTH:0.464427
G1 X112.369 Y95.664 E0.00969 ; infill
;WIDTH:0.415293
G1 X112.300 Y95.703 E0.00248 ; infill
;WIDTH:0.386022
G1 X112.230 Y95.742 E0.00229 ; infill
;WIDTH:0.356752
G1 X112.150 Y95.794 E0.00248 ; infill
;WIDTH:0.332743
G1 X111.539 Y96.100 E0.01646 ; infill
;WIDTH:0.322082
G1 X111.352 Y96.181 E0.00473 ; infill
;WIDTH:0.304322
G1 X111.183 Y96.223 E0.00379 ; infill
G1 X110.415 Y96.506 E0.01780 ; infill
G1 X110.033 Y96.261 F10800.000 ; move to first infill point
;WIDTH:0.469496
G1 F2400.000
G1 X110.639 Y96.331 E0.02162 ; infill
;WIDTH:0.482922
G1 X110.696 Y96.342 E0.00212 ; infill
;WIDTH:0.502093
G1 X111.246 Y96.373 E0.02105 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.696 Y96.342 E-0.14547 ; wipe and retract
;WIPE_END
G1 E-2.25453 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 X115.180 Y99.748 ; move to first perimeter point
G1 Z3.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.102 Y99.553 E0.00974 ; perimeter
G1 X115.010 Y99.178 E0.01790 ; perimeter
G1 X114.904 Y98.619 E0.02637 ; perimeter
G1 X114.919 Y97.966 E0.03022 ; perimeter
G1 X115.029 Y97.736 E0.01181 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.043 Y97.721 E0.00087 ; perimeter (bridge)
G1 X115.058 Y97.735 E0.00086 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.279 Y97.949 E0.01425 ; perimeter
G1 X115.460 Y98.281 E0.01751 ; perimeter
G1 X115.525 Y98.340 E0.00407 ; perimeter
G1 X115.611 Y98.519 E0.00919 ; perimeter
G1 X115.762 Y98.926 E0.02011 ; perimeter
G1 X115.892 Y99.446 E0.02484 ; perimeter
G1 X115.932 Y100.188 E0.03441 ; perimeter
G1 X115.869 Y100.936 E0.03477 ; perimeter
G1 X115.736 Y101.412 E0.02292 ; perimeter
G1 X115.564 Y101.659 E0.01393 ; perimeter
G1 X115.507 Y101.642 E0.00276 ; perimeter
G1 X115.344 Y101.363 E0.01496 ; perimeter
G1 X115.240 Y100.852 E0.02415 ; perimeter
G1 X115.214 Y100.335 E0.02399 ; perimeter
G1 X115.173 Y100.056 E0.01304 ; perimeter
G1 X115.179 Y99.808 E0.01149 ; perimeter
G1 X115.327 Y99.598 F10800.000 ; move inwards before travel
G1 X115.567 Y100.295 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.201042
G1 F2400.000
G1 X115.558 Y100.812 E0.00680 ; infill
G1 X115.575 Y101.088 E0.00364 ; infill
G1 X115.567 Y100.295 F10800.000 ; move to first infill point
;WIDTH:0.295932
G1 F2400.000
G1 X115.538 Y99.659 E0.01338 ; infill
G1 X115.278 Y98.660 E0.02172 ; infill
;WIDTH:0.281691
G1 X115.255 Y98.590 E0.00147 ; infill
;WIDTH:0.262491
G1 X115.192 Y98.295 E0.00551 ; infill
;LAYER_CHANGE
;Z:4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.255 Y98.590 E-0.07963 ; wipe and retract
;WIPE_END
G1 E-2.32037 F2400.000 ; retract
G1 Z3.875 F10800.000 ; lift Z
G1 Z4.000 ; move to next layer (19)
;AFTER_LAYER_CHANGE
;4
G1 Z4.075 ; lift Z
G1 X115.516 Y110.271 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.691 Y110.339 E0.00867 ; perimeter
G1 X115.794 Y110.444 E0.00683 ; perimeter
G1 X115.859 Y110.587 E0.00724 ; perimeter
G1 X115.873 Y110.840 E0.01176 ; perimeter
G1 X115.797 Y111.049 E0.01029 ; perimeter
G1 X115.676 Y111.167 E0.00785 ; perimeter
G1 X115.505 Y111.226 E0.00835 ; perimeter
G1 X115.420 Y111.223 E0.00395 ; perimeter
G1 X115.271 Y111.158 E0.00752 ; perimeter
G1 X115.150 Y111.024 E0.00836 ; perimeter
G1 X115.078 Y110.865 E0.00811 ; perimeter
G1 X115.063 Y110.712 E0.00711 ; perimeter
G1 X115.138 Y110.507 E0.01010 ; perimeter
G1 X115.269 Y110.339 E0.00985 ; perimeter
G1 X115.398 Y110.276 E0.00669 ; perimeter
G1 X115.456 Y110.274 E0.00269 ; perimeter
G1 X115.583 Y110.446 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.691 Y110.339 E-0.06417 ; wipe and retract
G1 X115.794 Y110.444 E-0.03888 ; wipe and retract
G1 X115.859 Y110.587 E-0.04126 ; wipe and retract
G1 X115.873 Y110.840 E-0.06698 ; wipe and retract
G1 X115.797 Y111.049 E-0.05864 ; wipe and retract
G1 X115.676 Y111.167 E-0.04470 ; wipe and retract
G1 X115.505 Y111.226 E-0.04758 ; wipe and retract
G1 X115.420 Y111.223 E-0.02248 ; wipe and retract
G1 X115.271 Y111.158 E-0.04284 ; wipe and retract
G1 X115.150 Y111.024 E-0.04765 ; wipe and retract
G1 X115.078 Y110.865 E-0.04618 ; wipe and retract
G1 X115.063 Y110.712 E-0.04050 ; wipe and retract
G1 X115.138 Y110.507 E-0.05754 ; wipe and retract
G1 X115.269 Y110.339 E-0.05613 ; wipe and retract
G1 X115.398 Y110.276 E-0.03808 ; wipe and retract
G1 X115.456 Y110.274 E-0.01531 ; wipe and retract
;WIPE_END
G1 E-1.67107 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X115.229 Y115.018 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.357 Y115.120 E0.00756 ; perimeter
G1 X115.440 Y115.321 E0.01009 ; perimeter
G1 X115.441 Y115.452 E0.00608 ; perimeter
G1 X115.395 Y115.569 E0.00582 ; perimeter
G1 X115.307 Y115.708 E0.00761 ; perimeter
G1 X115.253 Y115.750 E0.00314 ; perimeter
G1 X115.073 Y115.791 E0.00857 ; perimeter
G1 X114.851 Y115.751 E0.01042 ; perimeter
G1 X114.754 Y115.672 E0.00582 ; perimeter
G1 X114.725 Y115.617 E0.00289 ; perimeter
G1 X114.666 Y115.397 E0.01057 ; perimeter
G1 X114.749 Y115.132 E0.01285 ; perimeter
G1 X114.880 Y115.019 E0.00801 ; perimeter
G1 X115.100 Y114.992 E0.01027 ; perimeter
G1 X115.170 Y115.006 E0.00333 ; perimeter
G1 X115.242 Y115.181 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.357 Y115.120 E-0.05762 ; wipe and retract
G1 X115.440 Y115.321 E-0.05748 ; wipe and retract
G1 X115.441 Y115.452 E-0.03464 ; wipe and retract
G1 X115.395 Y115.569 E-0.03313 ; wipe and retract
G1 X115.307 Y115.708 E-0.04338 ; wipe and retract
G1 X115.253 Y115.750 E-0.01791 ; wipe and retract
G1 X115.073 Y115.791 E-0.04884 ; wipe and retract
G1 X114.851 Y115.751 E-0.05934 ; wipe and retract
G1 X114.754 Y115.672 E-0.03313 ; wipe and retract
G1 X114.725 Y115.617 E-0.01646 ; wipe and retract
G1 X114.666 Y115.397 E-0.06020 ; wipe and retract
G1 X114.749 Y115.132 E-0.07318 ; wipe and retract
G1 X114.880 Y115.019 E-0.04562 ; wipe and retract
G1 X115.100 Y114.992 E-0.05853 ; wipe and retract
G1 X115.170 Y115.006 E-0.01895 ; wipe and retract
;WIPE_END
G1 E-1.74158 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X104.562 Y115.742 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.529 Y115.949 E0.00967 ; perimeter
G1 X104.401 Y116.085 E0.00868 ; perimeter
G1 X104.211 Y116.168 E0.00961 ; perimeter
G1 X103.762 Y116.169 E0.02080 ; perimeter
G1 X103.396 Y116.081 E0.01739 ; perimeter
G1 X103.227 Y115.979 E0.00920 ; perimeter
G1 X103.118 Y115.834 E0.00837 ; perimeter
G1 X103.148 Y115.689 E0.00687 ; perimeter
G1 X103.308 Y115.539 E0.01014 ; perimeter
G1 X103.488 Y115.446 E0.00940 ; perimeter
G1 X103.646 Y115.400 E0.00762 ; perimeter
G1 X104.115 Y115.389 E0.02173 ; perimeter
G1 X104.385 Y115.476 E0.01311 ; perimeter
G1 X104.526 Y115.613 E0.00910 ; perimeter
G1 X104.546 Y115.685 E0.00346 ; perimeter
G1 X104.391 Y115.863 F10800.000 ; move inwards before travel
G1 X104.296 Y115.726 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.265964
G1 F2400.000
G1 X104.198 Y115.786 E0.00214 ; infill
G1 X103.723 Y115.909 E0.00909 ; infill
G1 X104.220 Y115.676 F10800.000 ; move to first infill point
;WIDTH:0.186017
G1 F2400.000
G1 X103.510 Y115.782 E0.00854 ; infill
;WIDTH:0.177879
G1 X103.494 Y115.785 E0.00019 ; infill
;WIDTH:0.168529
G1 X103.401 Y115.782 E0.00097 ; infill
G1 X103.448 Y115.738 F10800.000 ; move to first infill point
;WIDTH:0.338271
G1 F2400.000
G1 X103.813 Y115.783 E0.00902 ; infill
G1 X104.059 Y115.780 E0.00605 ; infill
G1 X104.306 Y115.818 E0.00614 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.059 Y115.780 E-0.06595 ; wipe and retract
G1 X103.813 Y115.783 E-0.06497 ; wipe and retract
G1 X103.448 Y115.738 E-0.09692 ; wipe and retract
;WIPE_END
G1 E-2.17215 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X96.213 Y115.548 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.270 Y115.698 E0.00741 ; perimeter
G1 X96.232 Y115.936 E0.01120 ; perimeter
G1 X96.146 Y116.048 E0.00653 ; perimeter
G1 X95.918 Y116.141 E0.01137 ; perimeter
G1 X95.825 Y116.146 E0.00435 ; perimeter
G1 X95.501 Y116.074 E0.01536 ; perimeter
G1 X94.891 Y115.682 E0.03362 ; perimeter
G1 X94.745 Y115.560 E0.00880 ; perimeter
G1 X94.464 Y115.225 E0.02024 ; perimeter
G1 X94.385 Y114.979 E0.01197 ; perimeter
G1 X94.380 Y114.622 E0.01654 ; perimeter
G1 X94.335 Y114.313 E0.01449 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X94.317 Y114.181 E0.00558 ; perimeter (bridge)
G1 X94.321 Y113.999 E0.00760 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X94.236 Y113.605 E0.01867 ; perimeter
G1 X94.191 Y113.214 E0.01824 ; perimeter
G1 X94.132 Y113.102 E0.00585 ; perimeter
G1 X94.084 Y112.746 E0.01663 ; perimeter
G1 X94.086 Y112.538 E0.00967 ; perimeter
G1 X94.126 Y112.419 E0.00578 ; perimeter
G1 X94.160 Y112.147 E0.01273 ; perimeter
G1 X94.249 Y112.065 E0.00561 ; perimeter
G1 X94.450 Y111.986 E0.00999 ; perimeter
G1 X94.517 Y111.993 E0.00314 ; perimeter
G1 X94.656 Y112.062 E0.00716 ; perimeter
G1 X94.675 Y112.106 E0.00221 ; perimeter
G1 X94.775 Y112.207 E0.00658 ; perimeter
G1 X94.780 Y112.295 E0.00407 ; perimeter
G1 X94.828 Y112.387 E0.00481 ; perimeter
G1 X94.794 Y112.583 E0.00924 ; perimeter
G1 X94.792 Y112.775 E0.00888 ; perimeter
G1 X94.657 Y113.241 E0.02249 ; perimeter
G1 X94.674 Y113.555 E0.01456 ; perimeter
G1 X94.659 Y113.763 E0.00964 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X94.641 Y114.016 E0.01062 ; perimeter (bridge)
G1 X94.689 Y114.238 E0.00947 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X94.703 Y114.487 E0.01158 ; perimeter
G1 X94.990 Y114.750 E0.01803 ; perimeter
G1 X95.608 Y115.212 E0.03576 ; perimeter
G1 X96.129 Y115.464 E0.02678 ; perimeter
G1 X96.170 Y115.506 E0.00273 ; perimeter
G1 X96.143 Y115.692 F10800.000 ; move inwards before travel
G1 X96.014 Y115.814 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.377778
G1 F2400.000
G1 X95.661 Y115.691 E0.01043 ; infill
G1 X95.417 Y115.555 E0.00779 ; infill
;WIDTH:0.343838
G1 X95.129 Y115.356 E0.00874 ; infill
G1 X94.917 Y115.176 E0.00695 ; infill
;WIDTH:0.331271
G1 X94.813 Y115.081 E0.00339 ; infill
;WIDTH:0.303543
G1 X94.770 Y115.025 E0.00154 ; infill
;WIDTH:0.26543
G1 X94.624 Y114.809 E0.00482 ; infill
G1 X94.388 Y113.071 F10800.000 ; move to first infill point
;WIDTH:0.26884
G1 F2400.000
G1 X94.446 Y112.560 E0.00967 ; infill
;WIDTH:0.257017
G1 X94.460 Y112.500 E0.00109 ; infill
;WIDTH:0.246269
G1 X94.461 Y112.405 E0.00162 ; infill
;WIDTH:0.226746
G1 X94.457 Y112.366 E0.00059 ; infill
;WIDTH:0.213279
G1 X94.423 Y112.256 E0.00164 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.457 Y112.366 E-0.03052 ; wipe and retract
;WIPE_END
G1 E-2.36948 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X95.929 Y108.279 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.793 Y108.208 E0.00711 ; perimeter
G1 X95.747 Y108.120 E0.00460 ; perimeter
G1 X95.703 Y108.009 E0.00556 ; perimeter
G1 X95.688 Y107.909 E0.00468 ; perimeter
G1 X95.708 Y107.757 E0.00710 ; perimeter
G1 X95.806 Y107.595 E0.00875 ; perimeter
G1 X95.905 Y107.517 E0.00586 ; perimeter
G1 X96.301 Y107.448 E0.01862 ; perimeter
G1 X96.431 Y107.509 E0.00668 ; perimeter
G1 X96.508 Y107.613 E0.00596 ; perimeter
G1 X96.568 Y107.871 E0.01227 ; perimeter
G1 X96.558 Y108.022 E0.00702 ; perimeter
G1 X96.474 Y108.191 E0.00875 ; perimeter
G1 X96.333 Y108.284 E0.00783 ; perimeter
G1 X96.112 Y108.317 E0.01033 ; perimeter
G1 X95.988 Y108.292 E0.00586 ; perimeter
G1 X95.899 Y108.129 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.793 Y108.208 E-0.05590 ; wipe and retract
G1 X95.747 Y108.120 E-0.02621 ; wipe and retract
G1 X95.703 Y108.009 E-0.03168 ; wipe and retract
G1 X95.688 Y107.909 E-0.02665 ; wipe and retract
G1 X95.708 Y107.757 E-0.04042 ; wipe and retract
G1 X95.806 Y107.595 E-0.04982 ; wipe and retract
G1 X95.905 Y107.517 E-0.03338 ; wipe and retract
G1 X96.301 Y107.448 E-0.10606 ; wipe and retract
G1 X96.431 Y107.509 E-0.03805 ; wipe and retract
G1 X96.508 Y107.613 E-0.03393 ; wipe and retract
G1 X96.568 Y107.871 E-0.06991 ; wipe and retract
G1 X96.558 Y108.022 E-0.04001 ; wipe and retract
G1 X96.474 Y108.191 E-0.04985 ; wipe and retract
G1 X96.333 Y108.284 E-0.04463 ; wipe and retract
G1 X96.112 Y108.317 E-0.05884 ; wipe and retract
G1 X95.988 Y108.292 E-0.03341 ; wipe and retract
;WIPE_END
G1 E-1.66126 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X97.292 Y106.521 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X97.224 Y106.425 E0.00543 ; perimeter
G1 X97.193 Y106.210 E0.01007 ; perimeter
G1 X97.221 Y106.079 E0.00621 ; perimeter
G1 X97.299 Y105.928 E0.00787 ; perimeter
G1 X97.344 Y105.886 E0.00284 ; perimeter
G1 X97.533 Y105.774 E0.01020 ; perimeter
G1 X97.888 Y105.753 E0.01648 ; perimeter
G1 X98.079 Y105.835 E0.00963 ; perimeter
G1 X98.115 Y105.871 E0.00237 ; perimeter
G1 X98.191 Y106.044 E0.00873 ; perimeter
G1 X98.189 Y106.189 E0.00674 ; perimeter
G1 X98.112 Y106.357 E0.00857 ; perimeter
G1 X97.968 Y106.485 E0.00893 ; perimeter
G1 X97.705 Y106.565 E0.01271 ; perimeter
G1 X97.350 Y106.539 E0.01650 ; perimeter
G1 X97.303 Y106.404 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.224 Y106.425 E-0.04462 ; wipe and retract
G1 X97.193 Y106.210 E-0.05734 ; wipe and retract
G1 X97.221 Y106.079 E-0.03536 ; wipe and retract
G1 X97.299 Y105.928 E-0.04482 ; wipe and retract
G1 X97.344 Y105.886 E-0.01615 ; wipe and retract
G1 X97.533 Y105.774 E-0.05812 ; wipe and retract
G1 X97.888 Y105.753 E-0.09389 ; wipe and retract
G1 X98.079 Y105.835 E-0.05488 ; wipe and retract
G1 X98.115 Y105.871 E-0.01350 ; wipe and retract
G1 X98.191 Y106.044 E-0.04972 ; wipe and retract
G1 X98.189 Y106.189 E-0.03837 ; wipe and retract
G1 X98.112 Y106.357 E-0.04880 ; wipe and retract
G1 X97.968 Y106.485 E-0.05086 ; wipe and retract
G1 X97.705 Y106.565 E-0.07242 ; wipe and retract
G1 X97.350 Y106.539 E-0.09402 ; wipe and retract
;WIPE_END
G1 E-1.62711 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X98.986 Y104.992 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.865 Y104.858 E0.00836 ; perimeter
G1 X98.807 Y104.598 E0.01235 ; perimeter
G1 X98.906 Y104.359 E0.01200 ; perimeter
G1 X99.122 Y104.198 E0.01246 ; perimeter
G1 X99.371 Y104.084 E0.01270 ; perimeter
G1 X99.708 Y103.797 E0.02048 ; perimeter
G1 X99.999 Y103.369 E0.02399 ; perimeter
G1 X100.123 Y103.290 E0.00680 ; perimeter
G1 X100.284 Y103.265 E0.00756 ; perimeter
G1 X100.387 Y103.270 E0.00477 ; perimeter
G1 X100.465 Y103.332 E0.00460 ; perimeter
G1 X100.571 Y103.379 E0.00538 ; perimeter
G1 X100.661 Y103.521 E0.00780 ; perimeter
G1 X100.701 Y103.722 E0.00949 ; perimeter
G1 X100.670 Y103.920 E0.00930 ; perimeter
G1 X100.527 Y104.125 E0.01159 ; perimeter
G1 X99.921 Y104.617 E0.03614 ; perimeter
G1 X99.496 Y105.019 E0.02709 ; perimeter
G1 X99.400 Y105.058 E0.00481 ; perimeter
G1 X99.154 Y105.062 E0.01141 ; perimeter
G1 X99.041 Y105.015 E0.00566 ; perimeter
G1 X99.001 Y104.812 F10800.000 ; move inwards before travel
G1 X99.129 Y104.790 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.408618
G1 F2400.000
G1 X99.250 Y104.637 E0.00595 ; infill
;WIDTH:0.422671
G1 X99.453 Y104.496 E0.00780 ; infill
;WIDTH:0.32365
G1 X99.674 Y104.327 E0.00650 ; infill
;WIDTH:0.338207
G1 X99.983 Y104.070 E0.00987 ; infill
G1 X100.208 Y103.829 E0.00810 ; infill
G1 X100.268 Y103.731 E0.00281 ; infill
G1 X100.260 Y103.643 E0.00218 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.268 Y103.731 E-0.02348 ; wipe and retract
G1 X100.208 Y103.829 E-0.03020 ; wipe and retract
G1 X99.983 Y104.070 E-0.08704 ; wipe and retract
G1 X99.674 Y104.327 E-0.10603 ; wipe and retract
;WIPE_END
G1 E-2.15325 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X103.814 Y100.210 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.284 Y99.851 E0.01999 ; perimeter
G1 X104.204 Y100.018 E0.00625 ; perimeter
G1 X104.167 Y100.051 E0.00170 ; perimeter
G1 X103.873 Y100.197 E0.01111 ; perimeter
G1 X103.014 Y100.724 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.929 Y100.645 E0.00538 ; perimeter
G1 X102.922 Y100.487 E0.00731 ; perimeter
G1 X103.004 Y100.316 E0.00878 ; perimeter
G1 X103.168 Y100.125 E0.01166 ; perimeter
G1 X103.690 Y99.683 E0.03166 ; perimeter
G1 X104.078 Y99.406 E0.02213 ; perimeter
G1 X104.172 Y99.317 E0.00595 ; perimeter
G1 X104.547 Y99.082 E0.02053 ; perimeter
G1 X105.015 Y98.909 E0.02308 ; perimeter
G1 X105.001 Y99.074 E0.00763 ; perimeter
G1 X104.864 Y99.404 E0.01658 ; perimeter
G1 X104.897 Y99.545 E0.00670 ; perimeter
G1 X104.791 Y99.692 E0.00842 ; perimeter
G1 X104.812 Y99.889 E0.00917 ; perimeter
G1 X104.672 Y100.146 E0.01359 ; perimeter
G1 X104.609 Y100.303 E0.00780 ; perimeter
G1 X104.430 Y100.462 E0.01111 ; perimeter
G1 X104.033 Y100.661 E0.02054 ; perimeter
G1 X103.268 Y100.794 E0.03597 ; perimeter
G1 X103.151 Y100.737 E0.00604 ; perimeter
G1 X103.074 Y100.730 E0.00360 ; perimeter
G1 X103.021 Y100.608 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.929 Y100.645 E-0.04434 ; wipe and retract
G1 X102.922 Y100.487 E-0.04164 ; wipe and retract
G1 X103.004 Y100.316 E-0.05003 ; wipe and retract
G1 X103.168 Y100.125 E-0.06643 ; wipe and retract
G1 X103.690 Y99.683 E-0.18039 ; wipe and retract
G1 X104.078 Y99.406 E-0.12609 ; wipe and retract
G1 X104.172 Y99.317 E-0.03391 ; wipe and retract
G1 X104.547 Y99.082 E-0.11698 ; wipe and retract
G1 X105.015 Y98.909 E-0.13147 ; wipe and retract
G1 X105.001 Y99.074 E-0.04348 ; wipe and retract
G1 X104.864 Y99.404 E-0.09443 ; wipe and retract
G1 X104.897 Y99.545 E-0.03815 ; wipe and retract
G1 X104.791 Y99.692 E-0.04796 ; wipe and retract
G1 X104.812 Y99.889 E-0.05227 ; wipe and retract
G1 X104.672 Y100.146 E-0.07739 ; wipe and retract
G1 X104.609 Y100.303 E-0.04444 ; wipe and retract
G1 X104.430 Y100.462 E-0.06332 ; wipe and retract
G1 X104.033 Y100.661 E-0.11699 ; wipe and retract
G1 X103.268 Y100.794 E-0.20491 ; wipe and retract
G1 X103.151 Y100.737 E-0.03439 ; wipe and retract
G1 X103.074 Y100.730 E-0.02053 ; wipe and retract
;WIPE_END
G1 E-0.77047 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X108.092 Y97.643 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.971 Y97.528 E0.00773 ; perimeter
G1 X107.924 Y97.375 E0.00742 ; perimeter
G1 X107.869 Y97.280 E0.00505 ; perimeter
G1 X107.838 Y97.000 E0.01307 ; perimeter
G1 X107.886 Y96.809 E0.00909 ; perimeter
G1 X108.041 Y96.654 E0.01017 ; perimeter
G1 X108.211 Y96.591 E0.00836 ; perimeter
G1 X108.364 Y96.574 E0.00715 ; perimeter
G1 X108.516 Y96.611 E0.00724 ; perimeter
G1 X108.635 Y96.953 E0.01679 ; perimeter
G1 X108.656 Y97.132 E0.00836 ; perimeter
G1 X108.616 Y97.422 E0.01353 ; perimeter
G1 X108.496 Y97.609 E0.01030 ; perimeter
G1 X108.364 Y97.687 E0.00711 ; perimeter
G1 X108.214 Y97.693 E0.00695 ; perimeter
G1 X108.147 Y97.665 E0.00335 ; perimeter
G1 X108.098 Y97.476 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.971 Y97.528 E-0.05909 ; wipe and retract
G1 X107.924 Y97.375 E-0.04227 ; wipe and retract
G1 X107.869 Y97.280 E-0.02879 ; wipe and retract
G1 X107.838 Y97.000 E-0.07446 ; wipe and retract
G1 X107.886 Y96.809 E-0.05180 ; wipe and retract
G1 X108.041 Y96.654 E-0.05794 ; wipe and retract
G1 X108.211 Y96.591 E-0.04764 ; wipe and retract
G1 X108.364 Y96.574 E-0.04073 ; wipe and retract
G1 X108.516 Y96.611 E-0.04122 ; wipe and retract
G1 X108.635 Y96.953 E-0.09565 ; wipe and retract
G1 X108.656 Y97.132 E-0.04765 ; wipe and retract
G1 X108.616 Y97.422 E-0.07708 ; wipe and retract
G1 X108.496 Y97.609 E-0.05868 ; wipe and retract
G1 X108.364 Y97.687 E-0.04048 ; wipe and retract
G1 X108.214 Y97.693 E-0.03961 ; wipe and retract
G1 X108.147 Y97.665 E-0.01907 ; wipe and retract
;WIPE_END
G1 E-1.57784 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X110.698 Y96.382 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.812 Y96.365 E0.00389 ; perimeter
G1 X110.937 Y96.378 E0.00423 ; perimeter
G1 X111.092 Y96.331 E0.00551 ; perimeter
G1 X111.024 Y96.389 E0.00303 ; perimeter
G1 X110.873 Y96.466 E0.00574 ; perimeter
G1 X110.751 Y96.411 E0.00453 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.812 Y96.365 E-0.02040 ; wipe and retract
G1 X110.937 Y96.378 E-0.03298 ; wipe and retract
G1 X111.092 Y96.331 E-0.04293 ; wipe and retract
G1 X111.024 Y96.389 E-0.02364 ; wipe and retract
G1 X110.873 Y96.466 E-0.04471 ; wipe and retract
G1 X110.751 Y96.411 E-0.03534 ; wipe and retract
;WIPE_END
G1 E-2.20001 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X114.006 Y95.470 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.227 Y95.429 E0.00764 ; perimeter
G1 X114.296 Y95.659 E0.00812 ; perimeter
G1 X114.176 Y95.522 E0.00614 ; perimeter
G1 X114.063 Y95.488 E0.00401 ; perimeter
G1 X113.904 Y95.944 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.380 Y95.785 E0.02536 ; perimeter
G1 X113.100 Y95.785 E0.01296 ; perimeter
G1 X112.674 Y95.939 E0.02103 ; perimeter
G1 X112.174 Y96.187 E0.02581 ; perimeter
G1 X111.548 Y96.574 E0.03411 ; perimeter
G1 X111.295 Y96.793 E0.01552 ; perimeter
G1 X110.966 Y96.958 E0.01703 ; perimeter
G1 X110.785 Y96.951 E0.00843 ; perimeter
G1 X110.553 Y96.854 E0.01164 ; perimeter
G1 X110.304 Y96.712 E0.01328 ; perimeter
G1 X110.203 Y96.577 E0.00780 ; perimeter
G1 X110.039 Y96.453 E0.00953 ; perimeter
G1 X109.952 Y96.262 E0.00972 ; perimeter
G1 X109.944 Y96.089 E0.00800 ; perimeter
G1 X110.128 Y95.962 E0.01032 ; perimeter
G1 X110.277 Y95.922 E0.00715 ; perimeter
G1 X110.479 Y95.927 E0.00940 ; perimeter
G1 X110.802 Y95.879 E0.01512 ; perimeter
G1 X110.890 Y95.888 E0.00408 ; perimeter
G1 X111.370 Y95.742 E0.02325 ; perimeter
G1 X111.920 Y95.501 E0.02779 ; perimeter
G1 X112.264 Y95.321 E0.01801 ; perimeter
G1 X113.045 Y95.140 E0.03712 ; perimeter
G1 X113.352 Y95.136 E0.01421 ; perimeter
G1 X114.103 Y94.950 E0.03584 ; perimeter
G1 X114.366 Y94.943 E0.01219 ; perimeter
G1 X114.482 Y94.996 E0.00589 ; perimeter
G1 X114.602 Y95.110 E0.00770 ; perimeter
G1 X114.687 Y95.264 E0.00813 ; perimeter
G1 X114.841 Y95.824 E0.02690 ; perimeter
G1 X114.941 Y96.595 E0.03605 ; perimeter
G1 X114.925 Y96.862 E0.01237 ; perimeter
G1 X114.988 Y97.031 E0.00838 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.023 Y97.124 E0.00414 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.078 Y97.379 E0.01205 ; perimeter
G1 X115.238 Y97.600 E0.01267 ; perimeter
G1 X115.469 Y98.037 E0.02290 ; perimeter
G1 X115.710 Y98.721 E0.03358 ; perimeter
G1 X115.802 Y99.204 E0.02277 ; perimeter
G1 X115.920 Y100.422 E0.05667 ; perimeter
G1 X115.870 Y101.319 E0.04163 ; perimeter
G1 X115.715 Y101.893 E0.02752 ; perimeter
G1 X115.561 Y102.099 E0.01194 ; perimeter
G1 X115.489 Y102.085 E0.00336 ; perimeter
G1 X115.348 Y101.861 E0.01226 ; perimeter
G1 X115.327 Y101.688 E0.00807 ; perimeter
G1 X115.251 Y101.485 E0.01002 ; perimeter
G1 X115.221 Y101.046 E0.02037 ; perimeter
G1 X115.239 Y100.919 E0.00597 ; perimeter
G1 X115.211 Y100.497 E0.01961 ; perimeter
G1 X115.247 Y99.742 E0.03499 ; perimeter
G1 X115.040 Y99.220 E0.02604 ; perimeter
G1 X114.947 Y98.834 E0.01839 ; perimeter
G1 X114.871 Y98.690 E0.00752 ; perimeter
G1 X114.776 Y98.225 E0.02198 ; perimeter
G1 X114.755 Y97.550 E0.03131 ; perimeter
G1 X114.779 Y97.446 E0.00494 ; perimeter
G1 X114.727 Y97.269 E0.00852 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.694 Y97.025 E0.01029 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.685 Y96.963 E0.00289 ; perimeter
G1 X114.480 Y96.709 E0.01513 ; perimeter
G1 X114.204 Y96.286 E0.02340 ; perimeter
G1 X113.944 Y95.989 E0.01831 ; perimeter
G1 X113.897 Y95.544 F10800.000 ; move inwards before travel
G1 X114.419 Y95.866 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.305722
G1 F2400.000
G1 X114.682 Y96.510 E0.01520 ; infill
G1 X115.062 Y97.783 F10800.000 ; move to first infill point
;WIDTH:0.284417
G1 F2400.000
G1 X115.137 Y98.185 E0.00822 ; infill
G1 X115.241 Y98.557 E0.00776 ; infill
G1 X115.338 Y98.821 E0.00565 ; infill
G1 X115.478 Y99.397 E0.01189 ; infill
;WIDTH:0.162197
G1 X115.549 Y99.705 E0.00313 ; infill
;WIDTH:0.195606
G1 X115.555 Y99.946 E0.00307 ; infill
;WIDTH:0.230734
G1 X115.561 Y100.187 E0.00377 ; infill
;WIDTH:0.265358
G1 X115.565 Y100.708 E0.00963 ; infill
;WIDTH:0.170213
G1 X115.554 Y101.268 E0.00593 ; infill
G1 X115.529 Y101.528 E0.00276 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.554 Y101.268 E-0.06891 ; wipe and retract
G1 X115.565 Y100.708 E-0.14785 ; wipe and retract
;WIPE_END
G1 E-2.18324 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 X113.765 Y95.441 ; move to first infill point
G1 Z4.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.226109
G1 F2400.000
G1 X113.416 Y95.457 E0.00533 ; infill
;WIDTH:0.21574
G1 X113.080 Y95.462 E0.00482 ; infill
;WIDTH:0.206223
G1 X112.528 Y95.615 E0.00778 ; infill
G1 X111.992 Y95.869 E0.00806 ; infill
;WIDTH:0.330427
G1 X111.304 Y96.215 E0.01841 ; infill
;LAYER_CHANGE
;Z:4.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.992 Y95.869 E-0.20319 ; wipe and retract
;WIPE_END
G1 E-2.19681 F2400.000 ; retract
G1 Z4.075 F10800.000 ; lift Z
G1 Z4.200 ; move to next layer (20)
;AFTER_LAYER_CHANGE
;4.2
G1 Z4.275 ; lift Z
G1 X115.379 Y110.184 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.525 Y110.175 E0.00678 ; perimeter
G1 X115.688 Y110.243 E0.00817 ; perimeter
G1 X115.802 Y110.358 E0.00753 ; perimeter
G1 X115.861 Y110.491 E0.00670 ; perimeter
G1 X115.877 Y110.706 E0.01000 ; perimeter
G1 X115.864 Y110.812 E0.00496 ; perimeter
G1 X115.794 Y110.964 E0.00773 ; perimeter
G1 X115.680 Y111.071 E0.00726 ; perimeter
G1 X115.521 Y111.128 E0.00784 ; perimeter
G1 X115.435 Y111.127 E0.00399 ; perimeter
G1 X115.268 Y111.056 E0.00839 ; perimeter
G1 X115.145 Y110.916 E0.00863 ; perimeter
G1 X115.077 Y110.756 E0.00805 ; perimeter
G1 X115.073 Y110.582 E0.00808 ; perimeter
G1 X115.152 Y110.391 E0.00955 ; perimeter
G1 X115.255 Y110.259 E0.00778 ; perimeter
G1 X115.326 Y110.211 E0.00395 ; perimeter
G1 X115.485 Y110.285 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.525 Y110.175 E-0.05336 ; wipe and retract
G1 X115.688 Y110.243 E-0.04655 ; wipe and retract
G1 X115.802 Y110.358 E-0.04290 ; wipe and retract
G1 X115.861 Y110.491 E-0.03820 ; wipe and retract
G1 X115.877 Y110.706 E-0.05698 ; wipe and retract
G1 X115.864 Y110.812 E-0.02823 ; wipe and retract
G1 X115.794 Y110.964 E-0.04406 ; wipe and retract
G1 X115.680 Y111.071 E-0.04136 ; wipe and retract
G1 X115.521 Y111.128 E-0.04469 ; wipe and retract
G1 X115.435 Y111.127 E-0.02275 ; wipe and retract
G1 X115.268 Y111.056 E-0.04778 ; wipe and retract
G1 X115.145 Y110.916 E-0.04915 ; wipe and retract
G1 X115.077 Y110.756 E-0.04589 ; wipe and retract
G1 X115.073 Y110.582 E-0.04604 ; wipe and retract
G1 X115.152 Y110.391 E-0.05442 ; wipe and retract
G1 X115.255 Y110.259 E-0.04434 ; wipe and retract
G1 X115.326 Y110.211 E-0.02248 ; wipe and retract
;WIPE_END
G1 E-1.67082 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X115.237 Y115.020 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.352 Y115.111 E0.00682 ; perimeter
G1 X115.396 Y115.181 E0.00383 ; perimeter
G1 X115.438 Y115.324 E0.00692 ; perimeter
G1 X115.441 Y115.453 E0.00599 ; perimeter
G1 X115.394 Y115.573 E0.00597 ; perimeter
G1 X115.307 Y115.707 E0.00736 ; perimeter
G1 X115.254 Y115.749 E0.00315 ; perimeter
G1 X115.067 Y115.790 E0.00885 ; perimeter
G1 X114.852 Y115.748 E0.01016 ; perimeter
G1 X114.734 Y115.645 E0.00725 ; perimeter
G1 X114.666 Y115.399 E0.01185 ; perimeter
G1 X114.734 Y115.142 E0.01231 ; perimeter
G1 X114.892 Y115.014 E0.00942 ; perimeter
G1 X115.108 Y114.991 E0.01004 ; perimeter
G1 X115.178 Y115.007 E0.00335 ; perimeter
G1 X115.247 Y115.166 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.352 Y115.111 E-0.05351 ; wipe and retract
G1 X115.396 Y115.181 E-0.02180 ; wipe and retract
G1 X115.438 Y115.324 E-0.03941 ; wipe and retract
G1 X115.441 Y115.453 E-0.03412 ; wipe and retract
G1 X115.394 Y115.573 E-0.03401 ; wipe and retract
G1 X115.307 Y115.707 E-0.04193 ; wipe and retract
G1 X115.254 Y115.749 E-0.01796 ; wipe and retract
G1 X115.067 Y115.790 E-0.05043 ; wipe and retract
G1 X114.852 Y115.748 E-0.05790 ; wipe and retract
G1 X114.734 Y115.645 E-0.04128 ; wipe and retract
G1 X114.666 Y115.399 E-0.06749 ; wipe and retract
G1 X114.734 Y115.142 E-0.07014 ; wipe and retract
G1 X114.892 Y115.014 E-0.05367 ; wipe and retract
G1 X115.108 Y114.991 E-0.05718 ; wipe and retract
G1 X115.178 Y115.007 E-0.01907 ; wipe and retract
;WIPE_END
G1 E-1.74008 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X104.691 Y115.972 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.589 Y116.085 E0.00699 ; perimeter
G1 X104.273 Y116.181 E0.01530 ; perimeter
G1 X103.719 Y116.174 E0.02568 ; perimeter
G1 X103.597 Y116.141 E0.00586 ; perimeter
G1 X103.252 Y116.109 E0.01603 ; perimeter
G1 X103.118 Y116.045 E0.00690 ; perimeter
G1 X102.905 Y115.985 E0.01025 ; perimeter
G1 X102.654 Y115.745 E0.01609 ; perimeter
G1 X102.906 Y115.587 E0.01375 ; perimeter
G1 X103.483 Y115.412 E0.02792 ; perimeter
G1 X104.285 Y115.394 E0.03718 ; perimeter
G1 X104.585 Y115.475 E0.01441 ; perimeter
G1 X104.722 Y115.638 E0.00985 ; perimeter
G1 X104.762 Y115.801 E0.00778 ; perimeter
G1 X104.723 Y115.922 E0.00589 ; perimeter
G1 X104.540 Y115.973 F10800.000 ; move inwards before travel
G1 X104.511 Y115.806 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.194308
G1 F2400.000
G1 X103.920 Y115.643 E0.00772 ; infill
G1 X104.495 Y115.743 F10800.000 ; move to first infill point
;WIDTH:0.345686
G1 F2400.000
G1 X104.217 Y115.788 E0.00708 ; infill
G1 X103.773 Y115.790 E0.01119 ; infill
;WIDTH:0.330127
G1 X103.674 Y115.778 E0.00238 ; infill
;WIDTH:0.301586
G1 X103.540 Y115.773 E0.00287 ; infill
;WIDTH:0.284267
G1 X103.356 Y115.791 E0.00371 ; infill
;WIDTH:0.245337
G1 X103.172 Y115.810 E0.00311 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.356 Y115.791 E-0.04883 ; wipe and retract
;WIPE_END
G1 E-2.35117 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X96.277 Y115.531 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.344 Y115.712 E0.00896 ; perimeter
G1 X96.288 Y115.978 E0.01262 ; perimeter
G1 X96.214 Y116.063 E0.00519 ; perimeter
G1 X96.025 Y116.143 E0.00953 ; perimeter
G1 X95.874 Y116.152 E0.00698 ; perimeter
G1 X95.604 Y116.089 E0.01287 ; perimeter
G1 X94.687 Y115.495 E0.05061 ; perimeter
G1 X94.388 Y115.179 E0.02011 ; perimeter
G1 X94.272 Y114.953 E0.01179 ; perimeter
G1 X94.212 Y114.571 E0.01789 ; perimeter
G1 X94.097 Y113.373 E0.05576 ; perimeter
G1 X94.070 Y112.809 E0.02617 ; perimeter
G1 X94.084 Y112.514 E0.01365 ; perimeter
G1 X94.175 Y112.205 E0.01492 ; perimeter
G1 X94.253 Y112.125 E0.00516 ; perimeter
G1 X94.446 Y112.067 E0.00938 ; perimeter
G1 X94.604 Y112.142 E0.00808 ; perimeter
G1 X94.705 Y112.159 E0.00473 ; perimeter
G1 X94.746 Y112.195 E0.00252 ; perimeter
G1 X94.842 Y112.393 E0.01019 ; perimeter
G1 X94.825 Y112.489 E0.00453 ; perimeter
G1 X94.839 Y112.647 E0.00735 ; perimeter
G1 X94.826 Y112.873 E0.01051 ; perimeter
G1 X94.768 Y113.075 E0.00973 ; perimeter
G1 X94.795 Y113.934 E0.03979 ; perimeter
G1 X94.829 Y114.118 E0.00867 ; perimeter
G1 X94.844 Y114.510 E0.01818 ; perimeter
G1 X94.983 Y114.632 E0.00857 ; perimeter
G1 X95.096 Y114.810 E0.00976 ; perimeter
G1 X95.210 Y114.900 E0.00671 ; perimeter
G1 X95.312 Y115.058 E0.00873 ; perimeter
G1 X95.635 Y115.249 E0.01738 ; perimeter
G1 X95.885 Y115.319 E0.01204 ; perimeter
G1 X96.182 Y115.450 E0.01502 ; perimeter
G1 X96.231 Y115.492 E0.00299 ; perimeter
G1 X96.192 Y115.704 F10800.000 ; move inwards before travel
G1 X96.065 Y115.667 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.206849
G1 F2400.000
G1 X95.966 Y115.750 E0.00176 ; infill
;WIDTH:0.325243
G1 X95.908 Y115.757 E0.00138 ; infill
G1 X95.765 Y115.709 E0.00354 ; infill
G1 X95.506 Y115.591 E0.00667 ; infill
;WIDTH:0.289887
G1 X95.084 Y115.332 E0.01017 ; infill
;WIDTH:0.275361
G1 X94.503 Y114.871 E0.01434 ; infill
G1 X94.462 Y114.610 F10800.000 ; move to first infill point
;WIDTH:0.328373
G1 F2400.000
G1 X94.826 Y115.084 E0.01419 ; infill
;WIDTH:0.344316
G1 X94.916 Y115.167 E0.00305 ; infill
G1 X95.219 Y115.552 E0.01229 ; infill
G1 X94.707 Y115.165 F10800.000 ; move to first infill point
;WIDTH:0.201048
G1 F2400.000
G1 X94.536 Y114.626 E0.00744 ; infill
G1 X94.475 Y113.962 E0.00876 ; infill
;WIDTH:0.240256
G1 X94.436 Y113.348 E0.01009 ; infill
;WIDTH:0.251252
G1 X94.425 Y113.016 E0.00576 ; infill
;WIDTH:0.285524
G1 X94.438 Y112.912 E0.00210 ; infill
;WIDTH:0.321645
G1 X94.458 Y112.653 E0.00603 ; infill
G1 X94.451 Y112.336 E0.00734 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.458 Y112.653 E-0.08360 ; wipe and retract
G1 X94.438 Y112.912 E-0.06868 ; wipe and retract
;WIPE_END
G1 E-2.24772 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X95.983 Y108.290 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.865 Y108.212 E0.00654 ; perimeter
G1 X95.781 Y108.059 E0.00811 ; perimeter
G1 X95.757 Y107.857 E0.00939 ; perimeter
G1 X95.786 Y107.744 E0.00540 ; perimeter
G1 X95.853 Y107.637 E0.00587 ; perimeter
G1 X95.962 Y107.556 E0.00628 ; perimeter
G1 X96.168 Y107.509 E0.00982 ; perimeter
G1 X96.441 Y107.562 E0.01288 ; perimeter
G1 X96.534 Y107.671 E0.00661 ; perimeter
G1 X96.627 Y107.911 E0.01192 ; perimeter
G1 X96.621 Y108.048 E0.00637 ; perimeter
G1 X96.577 Y108.162 E0.00565 ; perimeter
G1 X96.522 Y108.230 E0.00405 ; perimeter
G1 X96.368 Y108.323 E0.00833 ; perimeter
G1 X96.225 Y108.341 E0.00664 ; perimeter
G1 X96.041 Y108.302 E0.00871 ; perimeter
G1 X95.968 Y108.150 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.865 Y108.212 E-0.05231 ; wipe and retract
G1 X95.781 Y108.059 E-0.04618 ; wipe and retract
G1 X95.757 Y107.857 E-0.05350 ; wipe and retract
G1 X95.786 Y107.744 E-0.03079 ; wipe and retract
G1 X95.853 Y107.637 E-0.03342 ; wipe and retract
G1 X95.962 Y107.556 E-0.03578 ; wipe and retract
G1 X96.168 Y107.509 E-0.05592 ; wipe and retract
G1 X96.441 Y107.562 E-0.07335 ; wipe and retract
G1 X96.534 Y107.671 E-0.03767 ; wipe and retract
G1 X96.627 Y107.911 E-0.06793 ; wipe and retract
G1 X96.621 Y108.048 E-0.03631 ; wipe and retract
G1 X96.577 Y108.162 E-0.03217 ; wipe and retract
G1 X96.522 Y108.230 E-0.02310 ; wipe and retract
G1 X96.368 Y108.323 E-0.04748 ; wipe and retract
G1 X96.225 Y108.341 E-0.03785 ; wipe and retract
G1 X96.041 Y108.302 E-0.04964 ; wipe and retract
;WIPE_END
G1 E-1.68659 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X98.304 Y106.174 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.218 Y106.341 E0.00872 ; perimeter
G1 X98.083 Y106.457 E0.00825 ; perimeter
G1 X97.808 Y106.540 E0.01332 ; perimeter
G1 X97.548 Y106.528 E0.01207 ; perimeter
G1 X97.468 Y106.499 E0.00393 ; perimeter
G1 X97.332 Y106.334 E0.00991 ; perimeter
G1 X97.301 Y106.173 E0.00758 ; perimeter
G1 X97.409 Y105.905 E0.01340 ; perimeter
G1 X97.660 Y105.744 E0.01383 ; perimeter
G1 X97.731 Y105.732 E0.00332 ; perimeter
G1 X97.988 Y105.732 E0.01189 ; perimeter
G1 X98.215 Y105.826 E0.01138 ; perimeter
G1 X98.310 Y106.012 E0.00968 ; perimeter
G1 X98.311 Y106.114 E0.00475 ; perimeter
G1 X98.124 Y106.228 F10800.000 ; move inwards before travel
G1 X99.017 Y105.017 ; move to first perimeter point
G1 F1800.000
G1 X98.967 Y104.976 E0.00300 ; perimeter
G1 X98.889 Y104.845 E0.00706 ; perimeter
G1 X98.855 Y104.647 E0.00928 ; perimeter
G1 X98.861 Y104.586 E0.00288 ; perimeter
G1 X98.947 Y104.394 E0.00970 ; perimeter
G1 X99.166 Y104.221 E0.01296 ; perimeter
G1 X99.282 Y104.168 E0.00589 ; perimeter
G1 X99.558 Y103.958 E0.01606 ; perimeter
G1 X99.682 Y103.849 E0.00765 ; perimeter
G1 X99.768 Y103.717 E0.00731 ; perimeter
G1 X99.969 Y103.486 E0.01418 ; perimeter
G1 X100.157 Y103.376 E0.01011 ; perimeter
G1 X100.433 Y103.365 E0.01277 ; perimeter
G1 X100.643 Y103.459 E0.01068 ; perimeter
G1 X100.742 Y103.574 E0.00701 ; perimeter
G1 X100.801 Y103.748 E0.00853 ; perimeter
G1 X100.754 Y103.958 E0.00997 ; perimeter
G1 X100.683 Y104.075 E0.00632 ; perimeter
G1 X99.965 Y104.671 E0.04324 ; perimeter
G1 X99.541 Y105.064 E0.02676 ; perimeter
G1 X99.439 Y105.101 E0.00502 ; perimeter
G1 X99.195 Y105.104 E0.01131 ; perimeter
G1 X99.071 Y105.044 E0.00640 ; perimeter
G1 X99.017 Y104.953 F10800.000 ; move inwards before travel
G1 X99.299 Y104.669 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.374437
G1 F2400.000
G1 X99.514 Y104.517 E0.00724 ; infill
G1 X99.975 Y104.133 E0.01654 ; infill
;WIDTH:0.381931
G1 X100.008 Y104.101 E0.00129 ; infill
;WIDTH:0.430536
G1 X100.116 Y103.980 E0.00525 ; infill
;WIDTH:0.463548
G1 X100.261 Y103.838 E0.00710 ; infill
G1 X100.504 Y103.667 E0.01038 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.261 Y103.838 E-0.07830 ; wipe and retract
G1 X100.116 Y103.980 E-0.05360 ; wipe and retract
;WIPE_END
G1 E-2.26810 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X103.841 Y100.322 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.234 Y100.003 E0.01713 ; perimeter
G1 X104.401 Y99.929 E0.00619 ; perimeter
G1 X104.387 Y100.040 E0.00378 ; perimeter
G1 X104.324 Y100.094 E0.00280 ; perimeter
G1 X104.012 Y100.280 E0.01228 ; perimeter
G1 X103.900 Y100.310 E0.00394 ; perimeter
G1 X103.445 Y100.832 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.266 Y100.695 E0.01042 ; perimeter
G1 X103.210 Y100.551 E0.00717 ; perimeter
G1 X103.198 Y100.364 E0.00864 ; perimeter
G1 X103.296 Y100.179 E0.00971 ; perimeter
G1 X103.379 Y100.082 E0.00594 ; perimeter
G1 X104.023 Y99.558 E0.03845 ; perimeter
G1 X104.119 Y99.535 E0.00455 ; perimeter
G1 X104.379 Y99.390 E0.01379 ; perimeter
G1 X104.514 Y99.394 E0.00627 ; perimeter
G1 X104.641 Y99.340 E0.00640 ; perimeter
G1 X104.732 Y99.442 E0.00633 ; perimeter
G1 X104.769 Y99.599 E0.00748 ; perimeter
G1 X104.862 Y99.765 E0.00882 ; perimeter
G1 X104.898 Y99.957 E0.00905 ; perimeter
G1 X104.815 Y100.307 E0.01665 ; perimeter
G1 X104.608 Y100.486 E0.01270 ; perimeter
G1 X104.200 Y100.730 E0.02198 ; perimeter
G1 X103.932 Y100.799 E0.01282 ; perimeter
G1 X103.504 Y100.828 E0.01987 ; perimeter
G1 X103.415 Y100.609 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.266 Y100.695 E-0.07200 ; wipe and retract
G1 X103.210 Y100.551 E-0.04083 ; wipe and retract
G1 X103.198 Y100.364 E-0.04923 ; wipe and retract
G1 X103.296 Y100.179 E-0.05533 ; wipe and retract
G1 X103.379 Y100.082 E-0.03384 ; wipe and retract
G1 X104.023 Y99.558 E-0.21906 ; wipe and retract
G1 X104.119 Y99.535 E-0.02594 ; wipe and retract
G1 X104.379 Y99.390 E-0.07854 ; wipe and retract
G1 X104.514 Y99.394 E-0.03572 ; wipe and retract
G1 X104.641 Y99.340 E-0.03644 ; wipe and retract
G1 X104.732 Y99.442 E-0.03606 ; wipe and retract
G1 X104.769 Y99.599 E-0.04261 ; wipe and retract
G1 X104.862 Y99.765 E-0.05024 ; wipe and retract
G1 X104.898 Y99.957 E-0.05156 ; wipe and retract
G1 X104.815 Y100.307 E-0.09485 ; wipe and retract
G1 X104.608 Y100.486 E-0.07232 ; wipe and retract
G1 X104.200 Y100.730 E-0.12523 ; wipe and retract
G1 X103.932 Y100.799 E-0.07303 ; wipe and retract
G1 X103.504 Y100.828 E-0.11317 ; wipe and retract
;WIPE_END
G1 E-1.09399 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X107.992 Y97.690 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.878 Y97.353 E0.01649 ; perimeter
G1 X107.871 Y97.101 E0.01168 ; perimeter
G1 X107.919 Y96.940 E0.00777 ; perimeter
G1 X108.036 Y96.817 E0.00789 ; perimeter
G1 X108.210 Y96.744 E0.00872 ; perimeter
G1 X108.389 Y96.749 E0.00827 ; perimeter
G1 X108.451 Y96.796 E0.00363 ; perimeter
G1 X108.594 Y96.979 E0.01077 ; perimeter
G1 X108.629 Y97.070 E0.00449 ; perimeter
G1 X108.650 Y97.198 E0.00602 ; perimeter
G1 X108.646 Y97.466 E0.01241 ; perimeter
G1 X108.611 Y97.603 E0.00654 ; perimeter
G1 X108.504 Y97.761 E0.00885 ; perimeter
G1 X108.383 Y97.828 E0.00640 ; perimeter
G1 X108.231 Y97.835 E0.00703 ; perimeter
G1 X108.093 Y97.778 E0.00694 ; perimeter
G1 X108.037 Y97.730 E0.00341 ; perimeter
G1 X108.159 Y97.376 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.878 Y97.353 E-0.10784 ; wipe and retract
G1 X107.871 Y97.101 E-0.06655 ; wipe and retract
G1 X107.919 Y96.940 E-0.04427 ; wipe and retract
G1 X108.036 Y96.817 E-0.04495 ; wipe and retract
G1 X108.210 Y96.744 E-0.04965 ; wipe and retract
G1 X108.389 Y96.749 E-0.04714 ; wipe and retract
G1 X108.451 Y96.796 E-0.02070 ; wipe and retract
G1 X108.594 Y96.979 E-0.06136 ; wipe and retract
G1 X108.629 Y97.070 E-0.02559 ; wipe and retract
G1 X108.650 Y97.198 E-0.03427 ; wipe and retract
G1 X108.646 Y97.466 E-0.07071 ; wipe and retract
G1 X108.611 Y97.603 E-0.03727 ; wipe and retract
G1 X108.504 Y97.761 E-0.05043 ; wipe and retract
G1 X108.383 Y97.828 E-0.03645 ; wipe and retract
G1 X108.231 Y97.835 E-0.04003 ; wipe and retract
G1 X108.093 Y97.778 E-0.03956 ; wipe and retract
G1 X108.037 Y97.730 E-0.01943 ; wipe and retract
;WIPE_END
G1 E-1.60380 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X110.794 Y96.432 ; move to first perimeter point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.088 Y96.394 E0.01002 ; perimeter
G1 X110.939 Y96.560 E0.00753 ; perimeter
G1 X110.846 Y96.462 E0.00457 ; perimeter
G1 X110.913 Y97.097 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.670 Y96.975 E0.01260 ; perimeter
G1 X110.544 Y96.844 E0.00844 ; perimeter
G1 X110.421 Y96.775 E0.00653 ; perimeter
G1 X110.263 Y96.563 E0.01222 ; perimeter
G1 X110.156 Y96.305 E0.01296 ; perimeter
G1 X110.186 Y96.150 E0.00732 ; perimeter
G1 X110.317 Y96.055 E0.00751 ; perimeter
G1 X110.618 Y95.968 E0.01448 ; perimeter
G1 X111.034 Y95.915 E0.01947 ; perimeter
G1 X111.489 Y95.727 E0.02280 ; perimeter
G1 X111.942 Y95.571 E0.02220 ; perimeter
G1 X112.428 Y95.435 E0.02334 ; perimeter
G1 X113.437 Y95.231 E0.04772 ; perimeter
G1 X114.288 Y95.139 E0.03964 ; perimeter
G1 X114.442 Y95.164 E0.00722 ; perimeter
G1 X114.580 Y95.301 E0.00897 ; perimeter
G1 X114.705 Y95.485 E0.01031 ; perimeter
G1 X114.985 Y96.321 E0.04087 ; perimeter
G1 X115.030 Y96.723 E0.01874 ; perimeter
G1 X115.198 Y97.269 E0.02647 ; perimeter
G1 X115.363 Y97.627 E0.01825 ; perimeter
G1 X115.532 Y98.113 E0.02381 ; perimeter
G1 X115.609 Y98.414 E0.01439 ; perimeter
G1 X115.630 Y98.642 E0.01061 ; perimeter
G1 X115.703 Y98.957 E0.01500 ; perimeter
G1 X115.785 Y99.831 E0.04065 ; perimeter
G1 X115.875 Y100.387 E0.02610 ; perimeter
G1 X115.902 Y100.676 E0.01345 ; perimeter
G1 X115.885 Y101.558 E0.04084 ; perimeter
G1 X115.806 Y101.860 E0.01445 ; perimeter
G1 X115.797 Y102.058 E0.00922 ; perimeter
G1 X115.734 Y102.262 E0.00988 ; perimeter
G1 X115.601 Y102.453 E0.01079 ; perimeter
G1 X115.471 Y102.465 E0.00602 ; perimeter
G1 X115.415 Y102.432 E0.00305 ; perimeter
G1 X115.320 Y102.264 E0.00893 ; perimeter
G1 X115.248 Y102.026 E0.01150 ; perimeter
G1 X115.228 Y101.635 E0.01815 ; perimeter
G1 X115.199 Y101.562 E0.00364 ; perimeter
G1 X115.193 Y101.187 E0.01739 ; perimeter
G1 X115.234 Y100.884 E0.01417 ; perimeter
G1 X115.224 Y100.731 E0.00709 ; perimeter
G1 X115.246 Y100.474 E0.01197 ; perimeter
G1 X115.288 Y100.256 E0.01028 ; perimeter
G1 X115.331 Y99.745 E0.02373 ; perimeter
G1 X114.987 Y98.910 E0.04182 ; perimeter
G1 X114.947 Y98.744 E0.00792 ; perimeter
G1 X114.775 Y98.416 E0.01718 ; perimeter
G1 X114.717 Y98.139 E0.01309 ; perimeter
G1 X114.650 Y98.003 E0.00701 ; perimeter
G1 X114.621 Y97.897 E0.00512 ; perimeter
G1 X114.601 Y97.461 E0.02020 ; perimeter
G1 X114.503 Y96.997 E0.02196 ; perimeter
G1 X114.007 Y96.020 E0.05076 ; perimeter
G1 X113.859 Y95.853 E0.01032 ; perimeter
G1 X113.447 Y95.698 E0.02039 ; perimeter
G1 X112.964 Y95.706 E0.02237 ; perimeter
G1 X112.378 Y95.979 E0.02993 ; perimeter
G1 X111.796 Y96.380 E0.03277 ; perimeter
G1 X111.507 Y96.649 E0.01830 ; perimeter
G1 X111.302 Y96.877 E0.01416 ; perimeter
G1 X111.247 Y97.011 E0.00673 ; perimeter
G1 X111.078 Y97.122 E0.00936 ; perimeter
G1 X110.972 Y97.108 E0.00493 ; perimeter
G1 X110.833 Y96.837 F10800.000 ; move inwards before travel
G1 X111.269 Y96.104 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.138367
G1 F2400.000
G1 X111.691 Y95.995 E0.00346 ; infill
;WIDTH:0.240052
G1 X111.760 Y95.993 E0.00112 ; infill
G1 X111.895 Y95.924 E0.00250 ; infill
;WIDTH:0.198792
G1 X112.031 Y95.856 E0.00197 ; infill
;WIDTH:0.157532
G1 X112.127 Y95.811 E0.00101 ; infill
;WIDTH:0.127226
G1 X112.223 Y95.766 E0.00074 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.127 Y95.811 E-0.02788 ; wipe and retract
;WIPE_END
G1 E-2.37212 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 X114.679 Y96.166 ; move to first infill point
G1 Z4.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.46516
G1 F2400.000
G1 X114.231 Y95.592 E0.02555 ; infill
G1 X114.237 Y95.575 E0.00062 ; infill
;WIDTH:0.433551
G1 X114.276 Y95.482 E0.00330 ; infill
;WIDTH:0.390105
G1 X114.315 Y95.388 E0.00293 ; infill
G1 X114.162 Y95.388 F10800.000 ; move to first infill point
;WIDTH:0.354586
G1 F2400.000
G1 X114.368 Y95.802 E0.01199 ; infill
G1 X114.619 Y96.402 E0.01685 ; infill
;WIDTH:0.260099
G1 X114.694 Y96.654 E0.00474 ; infill
;WIDTH:0.144446
G1 X114.781 Y96.906 E0.00225 ; infill
;WIDTH:0.188933
G1 X114.906 Y97.386 E0.00602 ; infill
;WIDTH:0.199435
G1 X114.919 Y97.427 E0.00056 ; infill
;WIDTH:0.244937
G1 X114.947 Y97.542 E0.00199 ; infill
;WIDTH:0.290438
G1 X114.975 Y97.657 E0.00244 ; infill
;WIDTH:0.338479
G1 X115.023 Y97.861 E0.00515 ; infill
G1 X115.091 Y98.030 E0.00446 ; infill
;WIDTH:0.367382
G1 X115.158 Y98.278 E0.00694 ; infill
G1 X115.474 Y99.100 E0.02376 ; infill
G1 X115.565 Y100.127 F10800.000 ; move to first infill point
;WIDTH:0.13057
G1 F2400.000
G1 X115.565 Y100.518 E0.00285 ; infill
;WIDTH:0.233926
G1 X115.567 Y100.886 E0.00585 ; infill
;WIDTH:0.223918
G1 X115.543 Y101.208 E0.00486 ; infill
G1 X115.547 Y101.579 E0.00557 ; infill
;WIDTH:0.204391
G1 X115.535 Y101.695 E0.00157 ; infill
;WIDTH:0.168219
G1 X115.523 Y101.812 E0.00122 ; infill
;WIDTH:0.132046
G1 X115.523 Y101.979 E0.00124 ; infill
;WIDTH:0.115077
G1 X115.527 Y102.012 E0.00020 ; infill
;WIDTH:0.10396
G1 X115.527 Y102.051 E0.00020 ; infill
;LAYER_CHANGE
;Z:4.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.527 Y102.012 E-0.01030 ; wipe and retract
;WIPE_END
G1 E-2.38970 F2400.000 ; retract
G1 Z4.275 F10800.000 ; lift Z
G1 Z4.400 ; move to next layer (21)
;AFTER_LAYER_CHANGE
;4.4
G1 Z4.475 ; lift Z
G1 X115.558 Y110.088 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.666 Y110.130 E0.00540 ; perimeter
G1 X115.801 Y110.259 E0.00864 ; perimeter
G1 X115.863 Y110.395 E0.00690 ; perimeter
G1 X115.881 Y110.586 E0.00892 ; perimeter
G1 X115.862 Y110.731 E0.00677 ; perimeter
G1 X115.792 Y110.879 E0.00757 ; perimeter
G1 X115.686 Y110.976 E0.00662 ; perimeter
G1 X115.540 Y111.029 E0.00721 ; perimeter
G1 X115.434 Y111.029 E0.00493 ; perimeter
G1 X115.262 Y110.953 E0.00870 ; perimeter
G1 X115.146 Y110.815 E0.00836 ; perimeter
G1 X115.065 Y110.577 E0.01162 ; perimeter
G1 X115.077 Y110.489 E0.00412 ; perimeter
G1 X115.166 Y110.275 E0.01074 ; perimeter
G1 X115.243 Y110.178 E0.00573 ; perimeter
G1 X115.385 Y110.093 E0.00769 ; perimeter
G1 X115.498 Y110.090 E0.00522 ; perimeter
G1 X115.600 Y110.197 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.666 Y110.130 E-0.04577 ; wipe and retract
G1 X115.801 Y110.259 E-0.04920 ; wipe and retract
G1 X115.863 Y110.395 E-0.03932 ; wipe and retract
G1 X115.881 Y110.586 E-0.05083 ; wipe and retract
G1 X115.862 Y110.731 E-0.03854 ; wipe and retract
G1 X115.792 Y110.879 E-0.04313 ; wipe and retract
G1 X115.686 Y110.976 E-0.03774 ; wipe and retract
G1 X115.540 Y111.029 E-0.04110 ; wipe and retract
G1 X115.434 Y111.029 E-0.02810 ; wipe and retract
G1 X115.262 Y110.953 E-0.04954 ; wipe and retract
G1 X115.146 Y110.815 E-0.04760 ; wipe and retract
G1 X115.065 Y110.577 E-0.06618 ; wipe and retract
G1 X115.077 Y110.489 E-0.02345 ; wipe and retract
G1 X115.166 Y110.275 E-0.06116 ; wipe and retract
G1 X115.243 Y110.178 E-0.03262 ; wipe and retract
G1 X115.385 Y110.093 E-0.04379 ; wipe and retract
G1 X115.498 Y110.090 E-0.02974 ; wipe and retract
;WIPE_END
G1 E-1.67218 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X115.092 Y114.985 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.245 Y115.021 E0.00729 ; perimeter
G1 X115.347 Y115.102 E0.00606 ; perimeter
G1 X115.404 Y115.190 E0.00485 ; perimeter
G1 X115.444 Y115.325 E0.00651 ; perimeter
G1 X115.444 Y115.449 E0.00574 ; perimeter
G1 X115.393 Y115.577 E0.00642 ; perimeter
G1 X115.308 Y115.705 E0.00710 ; perimeter
G1 X115.254 Y115.747 E0.00318 ; perimeter
G1 X115.062 Y115.788 E0.00910 ; perimeter
G1 X114.851 Y115.744 E0.00998 ; perimeter
G1 X114.753 Y115.665 E0.00581 ; perimeter
G1 X114.667 Y115.408 E0.01253 ; perimeter
G1 X114.732 Y115.139 E0.01281 ; perimeter
G1 X114.862 Y115.024 E0.00805 ; perimeter
G1 X115.032 Y114.989 E0.00803 ; perimeter
G1 X115.168 Y115.122 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.245 Y115.021 E-0.05677 ; wipe and retract
G1 X115.347 Y115.102 E-0.03450 ; wipe and retract
G1 X115.404 Y115.190 E-0.02764 ; wipe and retract
G1 X115.444 Y115.325 E-0.03711 ; wipe and retract
G1 X115.444 Y115.449 E-0.03270 ; wipe and retract
G1 X115.393 Y115.577 E-0.03657 ; wipe and retract
G1 X115.308 Y115.705 E-0.04045 ; wipe and retract
G1 X115.254 Y115.747 E-0.01814 ; wipe and retract
G1 X115.062 Y115.788 E-0.05185 ; wipe and retract
G1 X114.851 Y115.744 E-0.05683 ; wipe and retract
G1 X114.753 Y115.665 E-0.03309 ; wipe and retract
G1 X114.667 Y115.408 E-0.07140 ; wipe and retract
G1 X114.732 Y115.139 E-0.07297 ; wipe and retract
G1 X114.862 Y115.024 E-0.04586 ; wipe and retract
G1 X115.032 Y114.989 E-0.04572 ; wipe and retract
;WIPE_END
G1 E-1.73840 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X104.801 Y116.088 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.506 Y116.178 E0.01429 ; perimeter
G1 X103.732 Y116.178 E0.03585 ; perimeter
G1 X102.996 Y116.128 E0.03418 ; perimeter
G1 X102.580 Y116.016 E0.01998 ; perimeter
G1 X102.329 Y115.982 E0.01172 ; perimeter
G1 X102.233 Y115.945 E0.00476 ; perimeter
G1 X102.070 Y115.833 E0.00918 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.019 Y115.798 E0.00259 ; perimeter (bridge)
G1 X102.083 Y115.722 E0.00414 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.323 Y115.600 E0.01250 ; perimeter
G1 X102.782 Y115.493 E0.02182 ; perimeter
G1 X103.352 Y115.423 E0.02661 ; perimeter
G1 X104.497 Y115.395 E0.05305 ; perimeter
G1 X104.817 Y115.481 E0.01533 ; perimeter
G1 X104.939 Y115.641 E0.00933 ; perimeter
G1 X104.966 Y115.837 E0.00917 ; perimeter
G1 X104.840 Y116.043 E0.01118 ; perimeter
G1 X104.520 Y115.961 F10800.000 ; move inwards before travel
G1 X104.439 Y115.786 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.345469
G1 F2400.000
G1 X103.745 Y115.795 E0.01746 ; infill
;WIDTH:0.326049
G1 X103.380 Y115.788 E0.00861 ; infill
;WIDTH:0.291296
G1 X103.215 Y115.792 E0.00339 ; infill
;WIDTH:0.260242
G1 X103.051 Y115.797 E0.00297 ; infill
;WIDTH:0.229188
G1 X102.879 Y115.785 E0.00268 ; infill
;WIDTH:0.187349
G1 X102.706 Y115.773 E0.00208 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.879 Y115.785 E-0.04569 ; wipe and retract
;WIPE_END
G1 E-2.35431 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X96.394 Y115.956 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.284 Y116.077 E0.00755 ; perimeter
G1 X96.131 Y116.144 E0.00777 ; perimeter
G1 X95.928 Y116.157 E0.00939 ; perimeter
G1 X95.706 Y116.102 E0.01060 ; perimeter
G1 X95.399 Y115.899 E0.01706 ; perimeter
G1 X95.228 Y115.699 E0.01217 ; perimeter
G1 X94.830 Y115.517 E0.02028 ; perimeter
G1 X94.528 Y115.338 E0.01628 ; perimeter
G1 X94.253 Y115.045 E0.01859 ; perimeter
G1 X94.191 Y114.882 E0.00810 ; perimeter
G1 X94.128 Y114.447 E0.02036 ; perimeter
G1 X94.062 Y112.943 E0.06972 ; perimeter
G1 X94.083 Y112.488 E0.02110 ; perimeter
G1 X94.160 Y112.275 E0.01048 ; perimeter
G1 X94.283 Y112.145 E0.00831 ; perimeter
G1 X94.479 Y112.097 E0.00933 ; perimeter
G1 X94.582 Y112.119 E0.00488 ; perimeter
G1 X94.781 Y112.256 E0.01123 ; perimeter
G1 X94.872 Y112.429 E0.00905 ; perimeter
G1 X94.880 Y112.600 E0.00794 ; perimeter
G1 X94.845 Y113.076 E0.02208 ; perimeter
G1 X94.877 Y114.025 E0.04399 ; perimeter
G1 X94.953 Y114.513 E0.02288 ; perimeter
G1 X95.306 Y115.106 E0.03198 ; perimeter
G1 X95.486 Y115.213 E0.00971 ; perimeter
G1 X96.161 Y115.402 E0.03247 ; perimeter
G1 X96.220 Y115.428 E0.00294 ; perimeter
G1 X96.365 Y115.550 E0.00878 ; perimeter
G1 X96.441 Y115.740 E0.00948 ; perimeter
G1 X96.407 Y115.898 E0.00749 ; perimeter
G1 X96.231 Y115.965 F10800.000 ; move inwards before travel
G1 X95.404 Y115.478 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.116269
G1 F2400.000
G1 X95.382 Y115.468 E0.00015 ; infill
;WIDTH:0.109122
G1 X95.110 Y115.327 E0.00169 ; infill
G1 X94.443 Y114.871 E0.00445 ; infill
G1 X94.401 Y114.649 F10800.000 ; move to first infill point
;WIDTH:0.295384
G1 F2400.000
G1 X95.170 Y115.408 E0.02269 ; infill
G1 X95.014 Y115.336 F10800.000 ; move to first infill point
;WIDTH:0.334725
G1 F2400.000
G1 X94.609 Y114.776 E0.01675 ; infill
G1 X94.561 Y114.619 E0.00398 ; infill
G1 X94.491 Y114.052 E0.01386 ; infill
;WIDTH:0.346042
G1 X94.456 Y113.076 E0.02463 ; infill
G1 X94.484 Y112.534 E0.01367 ; infill
G1 X94.471 Y112.352 E0.00461 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.484 Y112.534 E-0.04828 ; wipe and retract
G1 X94.456 Y113.076 E-0.14310 ; wipe and retract
G1 X94.491 Y114.052 E-0.25789 ; wipe and retract
;WIPE_END
G1 E-1.95073 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X96.052 Y108.312 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.932 Y108.216 E0.00713 ; perimeter
G1 X95.839 Y108.063 E0.00830 ; perimeter
G1 X95.820 Y107.885 E0.00826 ; perimeter
G1 X95.861 Y107.737 E0.00714 ; perimeter
G1 X95.900 Y107.678 E0.00327 ; perimeter
G1 X96.027 Y107.587 E0.00720 ; perimeter
G1 X96.209 Y107.538 E0.00874 ; perimeter
G1 X96.420 Y107.580 E0.00999 ; perimeter
G1 X96.613 Y107.766 E0.01241 ; perimeter
G1 X96.685 Y107.947 E0.00901 ; perimeter
G1 X96.683 Y108.076 E0.00597 ; perimeter
G1 X96.640 Y108.192 E0.00575 ; perimeter
G1 X96.558 Y108.280 E0.00554 ; perimeter
G1 X96.439 Y108.349 E0.00639 ; perimeter
G1 X96.330 Y108.365 E0.00511 ; perimeter
G1 X96.111 Y108.323 E0.01033 ; perimeter
G1 X96.045 Y108.158 F10800.000 ; move inwards before travel
G1 X96.328 Y108.005 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.292624
G1 F2400.000
G1 X96.308 Y107.989 E0.00054 ; infill
;WIDTH:0.317293
G1 X96.263 Y107.967 E0.00113 ; infill
;WIDTH:0.328899
G1 X96.245 Y107.958 E0.00049 ; infill
;WIDTH:0.342651
G1 X96.220 Y107.939 E0.00078 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.245 Y107.958 E-0.00829 ; wipe and retract
;WIPE_END
G1 E-2.39171 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X98.440 Y106.033 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.420 Y106.161 E0.00598 ; perimeter
G1 X98.325 Y106.324 E0.00874 ; perimeter
G1 X98.199 Y106.429 E0.00762 ; perimeter
G1 X97.910 Y106.516 E0.01396 ; perimeter
G1 X97.720 Y106.509 E0.00883 ; perimeter
G1 X97.611 Y106.463 E0.00547 ; perimeter
G1 X97.439 Y106.306 E0.01080 ; perimeter
G1 X97.418 Y106.209 E0.00461 ; perimeter
G1 X97.426 Y106.097 E0.00520 ; perimeter
G1 X97.510 Y105.902 E0.00985 ; perimeter
G1 X97.759 Y105.723 E0.01419 ; perimeter
G1 X97.885 Y105.697 E0.00599 ; perimeter
G1 X98.179 Y105.700 E0.01361 ; perimeter
G1 X98.330 Y105.807 E0.00858 ; perimeter
G1 X98.417 Y105.930 E0.00699 ; perimeter
G1 X98.427 Y105.975 E0.00211 ; perimeter
G1 X98.331 Y106.103 F10800.000 ; move inwards before travel
G1 X98.935 Y104.903 ; move to first perimeter point
G1 F1800.000
G1 X98.905 Y104.706 E0.00925 ; perimeter
G1 X98.935 Y104.542 E0.00769 ; perimeter
G1 X99.021 Y104.409 E0.00736 ; perimeter
G1 X99.240 Y104.220 E0.01337 ; perimeter
G1 X99.629 Y103.939 E0.02224 ; perimeter
G1 X99.967 Y103.582 E0.02278 ; perimeter
G1 X100.214 Y103.437 E0.01328 ; perimeter
G1 X100.436 Y103.404 E0.01038 ; perimeter
G1 X100.510 Y103.437 E0.00376 ; perimeter
G1 X100.747 Y103.439 E0.01098 ; perimeter
G1 X100.818 Y103.469 E0.00359 ; perimeter
G1 X100.910 Y103.554 E0.00581 ; perimeter
G1 X100.944 Y103.749 E0.00915 ; perimeter
G1 X100.905 Y103.912 E0.00775 ; perimeter
G1 X100.843 Y104.019 E0.00575 ; perimeter
G1 X100.004 Y104.714 E0.05045 ; perimeter
G1 X99.584 Y105.110 E0.02675 ; perimeter
G1 X99.474 Y105.146 E0.00535 ; perimeter
G1 X99.233 Y105.154 E0.01116 ; perimeter
G1 X99.047 Y105.051 E0.00988 ; perimeter
G1 X98.971 Y104.951 E0.00581 ; perimeter
G1 X99.057 Y104.745 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.905 Y104.706 E-0.06704 ; wipe and retract
G1 X98.935 Y104.542 E-0.04379 ; wipe and retract
G1 X99.021 Y104.409 E-0.04193 ; wipe and retract
G1 X99.240 Y104.220 E-0.07617 ; wipe and retract
G1 X99.629 Y103.939 E-0.12670 ; wipe and retract
G1 X99.967 Y103.582 E-0.12978 ; wipe and retract
G1 X100.214 Y103.437 E-0.07564 ; wipe and retract
G1 X100.436 Y103.404 E-0.05912 ; wipe and retract
G1 X100.510 Y103.437 E-0.02139 ; wipe and retract
G1 X100.747 Y103.439 E-0.06255 ; wipe and retract
G1 X100.818 Y103.469 E-0.02046 ; wipe and retract
G1 X100.910 Y103.554 E-0.03309 ; wipe and retract
G1 X100.944 Y103.749 E-0.05213 ; wipe and retract
G1 X100.905 Y103.912 E-0.04418 ; wipe and retract
G1 X100.843 Y104.019 E-0.03277 ; wipe and retract
G1 X100.004 Y104.714 E-0.28740 ; wipe and retract
G1 X99.584 Y105.110 E-0.15242 ; wipe and retract
G1 X99.474 Y105.146 E-0.03050 ; wipe and retract
G1 X99.233 Y105.154 E-0.06356 ; wipe and retract
G1 X99.047 Y105.051 E-0.05626 ; wipe and retract
G1 X98.971 Y104.951 E-0.03308 ; wipe and retract
;WIPE_END
G1 E-0.89004 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X100.690 Y103.774 ; move to first infill point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.381402
G1 F2400.000
G1 X100.374 Y103.849 E0.00915 ; infill
G1 X100.248 Y103.934 E0.00429 ; infill
G1 X99.892 Y104.265 E0.01367 ; infill
G1 X99.336 Y104.728 E0.02036 ; infill
G1 X99.184 Y104.833 E0.00520 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.336 Y104.728 E-0.04871 ; wipe and retract
G1 X99.892 Y104.265 E-0.19094 ; wipe and retract
G1 X100.248 Y103.934 E-0.12817 ; wipe and retract
G1 X100.374 Y103.849 E-0.04018 ; wipe and retract
G1 X100.690 Y103.774 E-0.08581 ; wipe and retract
;WIPE_END
G1 E-1.90619 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X103.930 Y100.493 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.952 Y100.373 E0.00415 ; perimeter
G1 X104.225 Y100.157 E0.01178 ; perimeter
G1 X104.492 Y100.092 E0.00930 ; perimeter
G1 X104.514 Y100.102 E0.00084 ; perimeter
G1 X103.983 Y100.465 E0.02178 ; perimeter
G1 X104.553 Y99.591 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.899 Y99.758 E0.01782 ; perimeter
G1 X104.909 Y99.786 E0.00135 ; perimeter
G1 X105.188 Y99.998 E0.01626 ; perimeter
G1 X105.033 Y100.300 E0.01570 ; perimeter
G1 X104.772 Y100.514 E0.01565 ; perimeter
G1 X104.303 Y100.840 E0.02642 ; perimeter
G1 X103.668 Y101.182 E0.03341 ; perimeter
G1 X103.389 Y101.241 E0.01322 ; perimeter
G1 X103.418 Y101.142 E0.00478 ; perimeter
G1 X103.383 Y100.902 E0.01124 ; perimeter
G1 X103.420 Y100.739 E0.00773 ; perimeter
G1 X103.404 Y100.592 E0.00685 ; perimeter
G1 X103.469 Y100.350 E0.01162 ; perimeter
G1 X103.468 Y100.249 E0.00466 ; perimeter
G1 X103.566 Y100.073 E0.00936 ; perimeter
G1 X103.753 Y99.902 E0.01173 ; perimeter
G1 X104.020 Y99.710 E0.01524 ; perimeter
G1 X104.378 Y99.610 E0.01723 ; perimeter
G1 X104.493 Y99.598 E0.00534 ; perimeter
G1 X104.665 Y99.959 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.899 Y99.758 E-0.11520 ; wipe and retract
G1 X104.909 Y99.786 E-0.00770 ; wipe and retract
G1 X105.188 Y99.998 E-0.09261 ; wipe and retract
G1 X105.033 Y100.300 E-0.08943 ; wipe and retract
G1 X104.772 Y100.514 E-0.08915 ; wipe and retract
G1 X104.303 Y100.840 E-0.15051 ; wipe and retract
G1 X103.668 Y101.182 E-0.19036 ; wipe and retract
G1 X103.389 Y101.241 E-0.07529 ; wipe and retract
G1 X103.418 Y101.142 E-0.02725 ; wipe and retract
G1 X103.383 Y100.902 E-0.06403 ; wipe and retract
G1 X103.420 Y100.739 E-0.04403 ; wipe and retract
G1 X103.404 Y100.592 E-0.03903 ; wipe and retract
G1 X103.469 Y100.350 E-0.06618 ; wipe and retract
G1 X103.468 Y100.249 E-0.02655 ; wipe and retract
G1 X103.566 Y100.073 E-0.05331 ; wipe and retract
G1 X103.753 Y99.902 E-0.06684 ; wipe and retract
G1 X104.020 Y99.710 E-0.08680 ; wipe and retract
G1 X104.378 Y99.610 E-0.09818 ; wipe and retract
G1 X104.493 Y99.598 E-0.03041 ; wipe and retract
;WIPE_END
G1 E-0.98714 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X107.966 Y97.765 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.890 Y97.491 E0.01315 ; perimeter
G1 X107.900 Y97.211 E0.01298 ; perimeter
G1 X107.940 Y97.099 E0.00552 ; perimeter
G1 X108.035 Y96.984 E0.00693 ; perimeter
G1 X108.212 Y96.899 E0.00908 ; perimeter
G1 X108.340 Y96.906 E0.00592 ; perimeter
G1 X108.461 Y96.966 E0.00625 ; perimeter
G1 X108.614 Y97.184 E0.01234 ; perimeter
G1 X108.657 Y97.583 E0.01861 ; perimeter
G1 X108.611 Y97.771 E0.00895 ; perimeter
G1 X108.525 Y97.896 E0.00705 ; perimeter
G1 X108.402 Y97.969 E0.00664 ; perimeter
G1 X108.253 Y97.977 E0.00688 ; perimeter
G1 X108.071 Y97.895 E0.00927 ; perimeter
G1 X108.002 Y97.813 E0.00496 ; perimeter
G1 X108.116 Y97.524 F10800.000 ; move inwards before travel
G1 X108.268 Y97.143 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.135141
G1 F2400.000
G1 X108.265 Y97.718 E0.00441 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.268 Y97.143 E-0.15188 ; wipe and retract
;WIPE_END
G1 E-2.24812 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X110.918 Y96.530 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.025 Y96.497 E0.00380 ; perimeter
G1 X110.987 Y96.656 E0.00551 ; perimeter
G1 X110.952 Y96.579 E0.00286 ; perimeter
G1 X112.238 Y95.778 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.264 Y95.772 E0.00125 ; perimeter
G1 X111.683 Y96.354 E0.03814 ; perimeter
G1 X111.478 Y96.674 E0.01759 ; perimeter
G1 X111.432 Y96.871 E0.00935 ; perimeter
G1 X111.300 Y97.190 E0.01599 ; perimeter
G1 X111.207 Y97.271 E0.00572 ; perimeter
G1 X111.127 Y97.292 E0.00380 ; perimeter
G1 X110.922 Y97.244 E0.00978 ; perimeter
G1 X110.750 Y97.120 E0.00981 ; perimeter
G1 X110.565 Y96.903 E0.01320 ; perimeter
G1 X110.528 Y96.814 E0.00449 ; perimeter
G1 X110.407 Y96.645 E0.00959 ; perimeter
G1 X110.371 Y96.362 E0.01324 ; perimeter
G1 X110.408 Y96.229 E0.00637 ; perimeter
G1 X110.512 Y96.150 E0.00607 ; perimeter
G1 X111.050 Y95.985 E0.02608 ; perimeter
G1 X111.154 Y95.972 E0.00482 ; perimeter
G1 X111.390 Y95.884 E0.01167 ; perimeter
G1 X111.689 Y95.824 E0.01411 ; perimeter
G1 X112.178 Y95.783 E0.02276 ; perimeter
G1 X112.256 Y95.798 F10800.000 ; move inwards before travel
G1 X113.636 Y95.469 ; move to first perimeter point
G1 F1800.000
G1 X114.210 Y95.353 E0.02711 ; perimeter
G1 X114.438 Y95.420 E0.01100 ; perimeter
G1 X114.560 Y95.504 E0.00689 ; perimeter
G1 X114.708 Y95.733 E0.01263 ; perimeter
G1 X114.747 Y95.762 E0.00223 ; perimeter
G1 X114.896 Y96.061 E0.01546 ; perimeter
G1 X115.420 Y97.742 E0.08155 ; perimeter
G1 X115.512 Y98.126 E0.01829 ; perimeter
G1 X115.578 Y98.829 E0.03274 ; perimeter
G1 X115.492 Y99.219 E0.01845 ; perimeter
G1 X115.491 Y99.608 E0.01805 ; perimeter
G1 X115.416 Y99.281 E0.01553 ; perimeter
G1 X115.219 Y99.089 E0.01276 ; perimeter
G1 X115.060 Y98.857 E0.01302 ; perimeter
G1 X114.678 Y98.137 E0.03777 ; perimeter
G1 X114.632 Y98.104 E0.00264 ; perimeter
G1 X114.548 Y97.938 E0.00858 ; perimeter
G1 X114.454 Y97.597 E0.01639 ; perimeter
G1 X114.409 Y97.203 E0.01840 ; perimeter
G1 X114.452 Y97.110 E0.00472 ; perimeter
G1 X114.263 Y96.617 E0.02447 ; perimeter
G1 X114.117 Y96.052 E0.02703 ; perimeter
G1 X113.837 Y95.592 E0.02496 ; perimeter
G1 X113.687 Y95.500 E0.00813 ; perimeter
G1 X114.031 Y95.533 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.210 Y95.353 E-0.14325 ; wipe and retract
G1 X114.438 Y95.420 E-0.06267 ; wipe and retract
G1 X114.560 Y95.504 E-0.03924 ; wipe and retract
G1 X114.708 Y95.733 E-0.07197 ; wipe and retract
G1 X114.747 Y95.762 E-0.01271 ; wipe and retract
G1 X114.896 Y96.061 E-0.08810 ; wipe and retract
G1 X115.420 Y97.742 E-0.46457 ; wipe and retract
G1 X115.512 Y98.126 E-0.10421 ; wipe and retract
G1 X115.578 Y98.829 E-0.18652 ; wipe and retract
G1 X115.492 Y99.219 E-0.10513 ; wipe and retract
G1 X115.491 Y99.608 E-0.10281 ; wipe and retract
G1 X115.416 Y99.281 E-0.08847 ; wipe and retract
G1 X115.219 Y99.089 E-0.07270 ; wipe and retract
G1 X115.060 Y98.857 E-0.07418 ; wipe and retract
G1 X114.678 Y98.137 E-0.21518 ; wipe and retract
G1 X114.632 Y98.104 E-0.01505 ; wipe and retract
G1 X114.548 Y97.938 E-0.04886 ; wipe and retract
G1 X114.454 Y97.597 E-0.09335 ; wipe and retract
G1 X114.409 Y97.203 E-0.10484 ; wipe and retract
G1 X114.452 Y97.110 E-0.02689 ; wipe and retract
G1 X114.263 Y96.617 E-0.13938 ; wipe and retract
G1 X114.244 Y96.544 E-0.01993 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X115.580 Y99.913 ; move to first perimeter point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.721 Y100.373 E0.02227 ; perimeter
G1 X115.763 Y100.441 E0.00370 ; perimeter
G1 X115.859 Y100.895 E0.02152 ; perimeter
G1 X115.876 Y101.260 E0.01693 ; perimeter
G1 X115.899 Y101.379 E0.00560 ; perimeter
G1 X115.897 Y101.811 E0.02001 ; perimeter
G1 X115.849 Y102.200 E0.01815 ; perimeter
G1 X115.752 Y102.520 E0.01549 ; perimeter
G1 X115.666 Y102.652 E0.00732 ; perimeter
G1 X115.508 Y102.712 E0.00781 ; perimeter
G1 X115.346 Y102.611 E0.00882 ; perimeter
G1 X115.245 Y102.491 E0.00727 ; perimeter
G1 X115.155 Y102.086 E0.01925 ; perimeter
G1 X115.139 Y101.676 E0.01899 ; perimeter
G1 X115.206 Y101.066 E0.02845 ; perimeter
G1 X115.271 Y100.873 E0.00941 ; perimeter
G1 X115.350 Y100.490 E0.01813 ; perimeter
G1 X115.559 Y99.969 E0.02598 ; perimeter
G1 X115.617 Y100.311 F10800.000 ; move inwards before travel
G1 X115.576 Y100.759 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.16054
G1 F2400.000
G1 X115.535 Y101.138 E0.00373 ; infill
;WIDTH:0.254835
G1 X115.510 Y102.040 E0.01589 ; infill
G1 X115.529 Y102.427 E0.00683 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y102.040 E-0.10231 ; wipe and retract
G1 X115.535 Y101.138 E-0.23801 ; wipe and retract
;WIPE_END
G1 E-2.05969 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X115.315 Y98.769 ; move to first infill point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.114041
G1 F2400.000
G1 X115.247 Y98.546 E0.00138 ; infill
;WIDTH:0.22899
G1 X115.137 Y98.192 E0.00573 ; infill
;WIDTH:0.361017
G1 X114.965 Y97.777 E0.01188 ; infill
G1 X114.837 Y97.273 E0.01376 ; infill
G1 X114.843 Y97.180 F10800.000 ; move to first infill point
;WIDTH:0.328212
G1 F2400.000
G1 X114.830 Y97.075 E0.00251 ; infill
G1 X114.545 Y96.202 E0.02178 ; infill
;WIDTH:0.315417
G1 X114.467 Y95.995 E0.00503 ; infill
;WIDTH:0.26856
G1 X114.444 Y95.954 E0.00087 ; infill
;WIDTH:0.24428
G1 X114.435 Y95.933 E0.00039 ; infill
;WIDTH:0.236925
G1 X114.317 Y95.741 E0.00364 ; infill
;WIDTH:0.226422
G1 X114.187 Y95.603 E0.00289 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.317 Y95.741 E-0.04992 ; wipe and retract
;WIPE_END
G1 E-2.35008 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 X111.548 Y96.111 ; move to first infill point
G1 Z4.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.140802
G1 F2400.000
G1 X111.411 Y96.206 E0.00136 ; infill
G1 X111.305 Y96.456 E0.00221 ; infill
;LAYER_CHANGE
;Z:4.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.411 Y96.206 E-0.07149 ; wipe and retract
G1 X111.548 Y96.111 E-0.04415 ; wipe and retract
;WIPE_END
G1 E-2.28436 F2400.000 ; retract
G1 Z4.475 F10800.000 ; lift Z
G1 Z4.600 ; move to next layer (22)
;AFTER_LAYER_CHANGE
;4.6
G1 Z4.675 ; lift Z
G1 X105.073 Y115.521 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.178 Y115.657 E0.00797 ; perimeter
G1 X105.201 Y115.834 E0.00826 ; perimeter
G1 X105.089 Y116.027 E0.01037 ; perimeter
G1 X105.015 Y116.089 E0.00446 ; perimeter
G1 X104.677 Y116.184 E0.01629 ; perimeter
G1 X104.035 Y116.179 E0.02973 ; perimeter
G1 X103.225 Y116.130 E0.03760 ; perimeter
G1 X102.845 Y116.144 E0.01762 ; perimeter
G1 X102.516 Y116.132 E0.01523 ; perimeter
G1 X101.880 Y116.033 E0.02981 ; perimeter
G1 X101.543 Y115.914 E0.01656 ; perimeter
G1 X101.479 Y115.860 E0.00389 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.392 Y115.787 E0.00473 ; perimeter (bridge)
G1 X101.461 Y115.749 E0.00330 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.741 Y115.595 E0.01481 ; perimeter
G1 X102.343 Y115.481 E0.02836 ; perimeter
G1 X103.134 Y115.429 E0.03674 ; perimeter
G1 X103.542 Y115.447 E0.01888 ; perimeter
G1 X103.721 Y115.416 E0.00845 ; perimeter
G1 X104.556 Y115.392 E0.03869 ; perimeter
G1 X104.726 Y115.398 E0.00788 ; perimeter
G1 X105.028 Y115.480 E0.01450 ; perimeter
G1 X105.044 Y115.691 F10800.000 ; move inwards before travel
G1 X104.946 Y115.751 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.34994
G1 F2400.000
G1 X104.624 Y115.789 E0.00828 ; infill
G1 X104.048 Y115.793 E0.01469 ; infill
;WIDTH:0.333005
G1 X103.759 Y115.788 E0.00698 ; infill
;WIDTH:0.307486
G1 X103.576 Y115.799 E0.00403 ; infill
;WIDTH:0.265166
G1 X103.234 Y115.782 E0.00633 ; infill
;WIDTH:0.257458
G1 X102.548 Y115.801 E0.01224 ; infill
;WIDTH:0.225707
G1 X102.383 Y115.793 E0.00252 ; infill
;WIDTH:0.189219
G1 X102.234 Y115.796 E0.00181 ; infill
;WIDTH:0.143069
G1 X102.084 Y115.798 E0.00124 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.234 Y115.796 E-0.03934 ; wipe and retract
;WIPE_END
G1 E-2.36066 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X96.550 Y115.803 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.506 Y115.938 E0.00661 ; perimeter
G1 X96.399 Y116.080 E0.00819 ; perimeter
G1 X96.243 Y116.145 E0.00785 ; perimeter
G1 X96.008 Y116.159 E0.01088 ; perimeter
G1 X95.783 Y116.098 E0.01079 ; perimeter
G1 X95.618 Y115.987 E0.00923 ; perimeter
G1 X95.456 Y115.807 E0.01123 ; perimeter
G1 X95.374 Y115.609 E0.00992 ; perimeter
G1 X94.875 Y115.377 E0.02549 ; perimeter
G1 X94.641 Y115.334 E0.01104 ; perimeter
G1 X94.461 Y115.246 E0.00926 ; perimeter
G1 X94.223 Y115.016 E0.01532 ; perimeter
G1 X94.148 Y114.859 E0.00810 ; perimeter
G1 X94.117 Y114.534 E0.01512 ; perimeter
G1 X94.084 Y113.656 E0.04070 ; perimeter
G1 X94.102 Y112.502 E0.05344 ; perimeter
G1 X94.193 Y112.238 E0.01292 ; perimeter
G1 X94.308 Y112.148 E0.00675 ; perimeter
G1 X94.532 Y112.058 E0.01118 ; perimeter
G1 X94.644 Y112.085 E0.00534 ; perimeter
G1 X94.818 Y112.201 E0.00969 ; perimeter
G1 X94.909 Y112.393 E0.00987 ; perimeter
G1 X94.920 Y112.531 E0.00638 ; perimeter
G1 X94.856 Y112.915 E0.01803 ; perimeter
G1 X94.846 Y113.361 E0.02068 ; perimeter
G1 X94.865 Y113.901 E0.02504 ; perimeter
G1 X95.001 Y114.592 E0.03262 ; perimeter
G1 X95.179 Y114.920 E0.01726 ; perimeter
G1 X95.184 Y115.024 E0.00483 ; perimeter
G1 X95.337 Y115.222 E0.01159 ; perimeter
G1 X95.745 Y115.371 E0.02010 ; perimeter
G1 X96.005 Y115.347 E0.01209 ; perimeter
G1 X96.316 Y115.426 E0.01487 ; perimeter
G1 X96.382 Y115.507 E0.00487 ; perimeter
G1 X96.516 Y115.619 E0.00808 ; perimeter
G1 X96.541 Y115.744 E0.00589 ; perimeter
G1 X96.424 Y115.869 F10800.000 ; move inwards before travel
G1 X96.301 Y115.764 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.17311
G1 F2400.000
G1 X96.176 Y115.793 E0.00139 ; infill
;WIDTH:0.278763
G1 X95.973 Y115.743 E0.00408 ; infill
G1 X95.702 Y115.720 E0.00535 ; infill
G1 X95.636 Y115.612 F10800.000 ; move to first infill point
;WIDTH:0.126061
G1 F2400.000
G1 X95.699 Y115.655 E0.00052 ; infill
;WIDTH:0.140898
G1 X96.185 Y115.907 E0.00446 ; infill
G1 X94.874 Y115.132 F10800.000 ; move to first infill point
;WIDTH:0.411377
G1 F2400.000
G1 X94.737 Y114.950 E0.00698 ; infill
;WIDTH:0.420279
G1 X94.581 Y114.738 E0.00826 ; infill
G1 X94.514 Y114.231 E0.01605 ; infill
;WIDTH:0.318632
G1 X94.470 Y113.651 E0.01333 ; infill
G1 X94.476 Y112.889 E0.01748 ; infill
G1 X94.503 Y112.587 E0.00695 ; infill
G1 X94.580 Y112.331 E0.00612 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.503 Y112.587 E-0.07042 ; wipe and retract
G1 X94.476 Y112.889 E-0.08001 ; wipe and retract
G1 X94.470 Y113.651 E-0.20121 ; wipe and retract
G1 X94.514 Y114.231 E-0.15348 ; wipe and retract
;WIPE_END
G1 E-1.89488 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X96.108 Y108.334 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.995 Y108.248 E0.00659 ; perimeter
G1 X95.899 Y108.078 E0.00903 ; perimeter
G1 X95.883 Y107.903 E0.00816 ; perimeter
G1 X95.967 Y107.703 E0.01003 ; perimeter
G1 X96.108 Y107.598 E0.00815 ; perimeter
G1 X96.240 Y107.566 E0.00628 ; perimeter
G1 X96.496 Y107.615 E0.01206 ; perimeter
G1 X96.613 Y107.697 E0.00666 ; perimeter
G1 X96.689 Y107.786 E0.00541 ; perimeter
G1 X96.754 Y107.971 E0.00906 ; perimeter
G1 X96.748 Y108.095 E0.00578 ; perimeter
G1 X96.701 Y108.224 E0.00633 ; perimeter
G1 X96.528 Y108.371 E0.01056 ; perimeter
G1 X96.412 Y108.396 E0.00547 ; perimeter
G1 X96.167 Y108.346 E0.01160 ; perimeter
G1 X96.100 Y108.192 F10800.000 ; move inwards before travel
G1 X96.272 Y107.962 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.340753
G1 F2400.000
G1 X96.342 Y107.984 E0.00182 ; infill
G1 X96.272 Y107.962 F10800.000 ; move to first infill point
;WIDTH:0.325291
G1 F2400.000
G1 X96.259 Y107.948 E0.00044 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.272 Y107.962 E-0.00499 ; wipe and retract
;WIPE_END
G1 E-2.39501 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X97.537 Y106.240 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.529 Y106.103 E0.00633 ; perimeter
G1 X97.621 Y105.872 E0.01153 ; perimeter
G1 X97.842 Y105.704 E0.01287 ; perimeter
G1 X98.010 Y105.661 E0.00801 ; perimeter
G1 X98.378 Y105.680 E0.01710 ; perimeter
G1 X98.533 Y105.825 E0.00982 ; perimeter
G1 X98.561 Y106.019 E0.00905 ; perimeter
G1 X98.525 Y106.174 E0.00739 ; perimeter
G1 X98.467 Y106.272 E0.00525 ; perimeter
G1 X98.309 Y106.403 E0.00953 ; perimeter
G1 X98.008 Y106.500 E0.01464 ; perimeter
G1 X97.892 Y106.497 E0.00538 ; perimeter
G1 X97.730 Y106.441 E0.00795 ; perimeter
G1 X97.567 Y106.292 E0.01023 ; perimeter
G1 X97.624 Y106.134 F10800.000 ; move inwards before travel
G1 X99.102 Y105.194 ; move to first perimeter point
G1 F1800.000
G1 X98.995 Y105.029 E0.00914 ; perimeter
G1 X98.955 Y104.753 E0.01291 ; perimeter
G1 X98.998 Y104.545 E0.00985 ; perimeter
G1 X99.072 Y104.446 E0.00570 ; perimeter
G1 X99.618 Y104.011 E0.03235 ; perimeter
G1 X100.060 Y103.586 E0.02842 ; perimeter
G1 X100.324 Y103.425 E0.01432 ; perimeter
G1 X100.514 Y103.407 E0.00881 ; perimeter
G1 X100.584 Y103.380 E0.00351 ; perimeter
G1 X100.867 Y103.389 E0.01308 ; perimeter
G1 X101.096 Y103.421 E0.01072 ; perimeter
G1 X101.178 Y103.527 E0.00624 ; perimeter
G1 X101.101 Y103.813 E0.01373 ; perimeter
G1 X101.012 Y103.957 E0.00784 ; perimeter
G1 X100.711 Y104.202 E0.01798 ; perimeter
G1 X100.566 Y104.270 E0.00737 ; perimeter
G1 X100.331 Y104.425 E0.01306 ; perimeter
G1 X99.962 Y104.731 E0.02222 ; perimeter
G1 X99.923 Y104.859 E0.00617 ; perimeter
G1 X99.768 Y105.033 E0.01079 ; perimeter
G1 X99.621 Y105.163 E0.00913 ; perimeter
G1 X99.483 Y105.219 E0.00690 ; perimeter
G1 X99.233 Y105.239 E0.01162 ; perimeter
G1 X99.159 Y105.214 E0.00361 ; perimeter
G1 X99.134 Y105.000 F10800.000 ; move inwards before travel
G1 X99.230 Y104.948 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334808
G1 F2400.000
G1 X99.657 Y104.478 E0.01542 ; infill
G1 X99.878 Y104.298 E0.00692 ; infill
;WIDTH:0.357165
G1 X100.101 Y104.099 E0.00779 ; infill
;WIDTH:0.383041
G1 X100.211 Y104.011 E0.00398 ; infill
;WIDTH:0.408829
G1 X100.371 Y103.893 E0.00607 ; infill
;WIDTH:0.420365
G1 X100.463 Y103.844 E0.00328 ; infill
G1 X100.867 Y103.734 E0.01311 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.463 Y103.844 E-0.11025 ; wipe and retract
G1 X100.371 Y103.893 E-0.02759 ; wipe and retract
;WIPE_END
G1 E-2.26216 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X104.014 Y100.565 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.128 Y100.379 E0.00736 ; perimeter
G1 X104.307 Y100.248 E0.00752 ; perimeter
G1 X104.448 Y100.207 E0.00496 ; perimeter
G1 X104.555 Y100.209 E0.00363 ; perimeter
G1 X104.061 Y100.527 E0.01989 ; perimeter
G1 X103.410 Y100.905 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.511 Y100.463 E0.02101 ; perimeter
G1 X103.767 Y100.046 E0.02267 ; perimeter
G1 X104.085 Y99.814 E0.01822 ; perimeter
G1 X104.384 Y99.723 E0.01447 ; perimeter
G1 X104.728 Y99.731 E0.01597 ; perimeter
G1 X105.079 Y99.799 E0.01652 ; perimeter
G1 X105.231 Y99.772 E0.00718 ; perimeter
G1 X105.400 Y99.852 E0.00866 ; perimeter
G1 X105.529 Y99.866 E0.00598 ; perimeter
G1 X105.577 Y99.922 E0.00343 ; perimeter
G1 X105.550 Y99.989 E0.00335 ; perimeter
G1 X105.368 Y100.223 E0.01371 ; perimeter
G1 X104.951 Y100.530 E0.02399 ; perimeter
G1 X104.382 Y100.888 E0.03112 ; perimeter
G1 X103.910 Y101.262 E0.02792 ; perimeter
G1 X103.590 Y101.456 E0.01732 ; perimeter
G1 X103.327 Y101.654 E0.01527 ; perimeter
G1 X103.181 Y101.737 E0.00777 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.827 Y101.912 E0.01649 ; perimeter (bridge)
G1 X102.874 Y101.770 E0.00627 ; perimeter (bridge)
G1 X102.986 Y101.614 E0.00799 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.031 Y101.552 E0.00354 ; perimeter
G1 X103.092 Y101.334 E0.01050 ; perimeter
G1 X103.375 Y100.953 E0.02197 ; perimeter
G1 X103.803 Y100.826 F10800.000 ; move inwards before travel
G1 X103.530 Y101.185 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.13186
G1 F2400.000
G1 X103.607 Y101.115 E0.00077 ; infill
;WIDTH:0.1668
G1 X103.684 Y101.045 E0.00107 ; infill
;WIDTH:0.183746
G1 X103.703 Y101.023 E0.00033 ; infill
;WIDTH:0.211857
G1 X103.884 Y100.772 E0.00436 ; infill
G1 X104.796 Y100.175 F10800.000 ; move to first infill point
;WIDTH:0.133759
G1 F2400.000
G1 X105.164 Y100.057 E0.00292 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.796 Y100.175 E-0.10209 ; wipe and retract
;WIPE_END
G1 E-2.29791 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X108.097 Y98.047 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.954 Y97.859 E0.01092 ; perimeter
G1 X107.901 Y97.628 E0.01098 ; perimeter
G1 X107.922 Y97.335 E0.01363 ; perimeter
G1 X107.946 Y97.261 E0.00360 ; perimeter
G1 X108.056 Y97.123 E0.00817 ; perimeter
G1 X108.210 Y97.052 E0.00784 ; perimeter
G1 X108.426 Y97.078 E0.01006 ; perimeter
G1 X108.476 Y97.106 E0.00266 ; perimeter
G1 X108.600 Y97.264 E0.00930 ; perimeter
G1 X108.642 Y97.374 E0.00545 ; perimeter
G1 X108.668 Y97.731 E0.01657 ; perimeter
G1 X108.585 Y97.981 E0.01222 ; perimeter
G1 X108.406 Y98.109 E0.01022 ; perimeter
G1 X108.204 Y98.105 E0.00936 ; perimeter
G1 X108.150 Y98.076 E0.00286 ; perimeter
G1 X108.134 Y97.814 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.954 Y97.859 E-0.07697 ; wipe and retract
G1 X107.901 Y97.628 E-0.06254 ; wipe and retract
G1 X107.922 Y97.335 E-0.07764 ; wipe and retract
G1 X107.946 Y97.261 E-0.02049 ; wipe and retract
G1 X108.056 Y97.123 E-0.04657 ; wipe and retract
G1 X108.210 Y97.052 E-0.04467 ; wipe and retract
G1 X108.426 Y97.078 E-0.05733 ; wipe and retract
G1 X108.476 Y97.106 E-0.01515 ; wipe and retract
G1 X108.600 Y97.264 E-0.05301 ; wipe and retract
G1 X108.642 Y97.374 E-0.03107 ; wipe and retract
G1 X108.668 Y97.731 E-0.09439 ; wipe and retract
G1 X108.585 Y97.981 E-0.06963 ; wipe and retract
G1 X108.406 Y98.109 E-0.05820 ; wipe and retract
G1 X108.204 Y98.105 E-0.05335 ; wipe and retract
G1 X108.150 Y98.076 E-0.01630 ; wipe and retract
;WIPE_END
G1 E-1.62270 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X111.481 Y96.322 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.511 Y96.574 E0.01176 ; perimeter
G1 X111.427 Y96.790 E0.01070 ; perimeter
G1 X111.462 Y96.988 E0.00934 ; perimeter
G1 X111.420 Y97.210 E0.01046 ; perimeter
G1 X111.351 Y97.378 E0.00843 ; perimeter
G1 X111.286 Y97.444 E0.00429 ; perimeter
G1 X111.184 Y97.465 E0.00481 ; perimeter
G1 X110.967 Y97.407 E0.01041 ; perimeter
G1 X110.794 Y97.260 E0.01052 ; perimeter
G1 X110.626 Y96.976 E0.01530 ; perimeter
G1 X110.524 Y96.731 E0.01229 ; perimeter
G1 X110.500 Y96.537 E0.00903 ; perimeter
G1 X110.542 Y96.371 E0.00794 ; perimeter
G1 X110.669 Y96.270 E0.00751 ; perimeter
G1 X111.114 Y96.134 E0.02155 ; perimeter
G1 X111.417 Y96.077 E0.01428 ; perimeter
G1 X111.628 Y96.071 E0.00980 ; perimeter
G1 X111.628 Y96.098 E0.00125 ; perimeter
G1 X111.514 Y96.272 E0.00962 ; perimeter
G1 X111.249 Y96.427 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.511 Y96.574 E-0.07978 ; wipe and retract
G1 X111.427 Y96.790 E-0.06093 ; wipe and retract
G1 X111.462 Y96.988 E-0.05320 ; wipe and retract
G1 X111.420 Y97.210 E-0.05957 ; wipe and retract
G1 X111.351 Y97.378 E-0.04800 ; wipe and retract
G1 X111.286 Y97.444 E-0.02441 ; wipe and retract
G1 X111.184 Y97.465 E-0.02743 ; wipe and retract
G1 X110.967 Y97.407 E-0.05929 ; wipe and retract
G1 X110.794 Y97.260 E-0.05996 ; wipe and retract
G1 X110.626 Y96.976 E-0.08716 ; wipe and retract
G1 X110.524 Y96.731 E-0.07003 ; wipe and retract
G1 X110.500 Y96.537 E-0.05143 ; wipe and retract
G1 X110.542 Y96.371 E-0.04523 ; wipe and retract
G1 X110.669 Y96.270 E-0.04281 ; wipe and retract
G1 X111.114 Y96.134 E-0.12276 ; wipe and retract
G1 X111.417 Y96.077 E-0.08138 ; wipe and retract
G1 X111.628 Y96.071 E-0.05585 ; wipe and retract
G1 X111.628 Y96.098 E-0.00713 ; wipe and retract
G1 X111.514 Y96.272 E-0.05478 ; wipe and retract
;WIPE_END
G1 E-1.30888 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X114.788 Y97.394 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.800 Y97.369 E0.00092 ; perimeter
G1 X114.877 Y97.646 E0.00975 ; perimeter
G1 X114.817 Y97.572 E0.00325 ; perimeter
G1 X114.788 Y97.454 E0.00411 ; perimeter
G1 X114.389 Y97.109 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.276 Y96.808 E0.01487 ; perimeter
G1 X114.294 Y96.733 E0.00357 ; perimeter
G1 X114.298 Y96.423 E0.01439 ; perimeter
G1 X114.257 Y96.253 E0.00809 ; perimeter
G1 X114.285 Y95.803 E0.02091 ; perimeter
G1 X114.326 Y95.735 E0.00363 ; perimeter
G1 X114.488 Y95.737 E0.00750 ; perimeter
G1 X114.573 Y95.781 E0.00446 ; perimeter
G1 X114.650 Y95.903 E0.00666 ; perimeter
G1 X114.750 Y95.979 E0.00585 ; perimeter
G1 X114.784 Y96.050 E0.00362 ; perimeter
G1 X114.888 Y96.175 E0.00753 ; perimeter
G1 X115.033 Y96.489 E0.01601 ; perimeter
G1 X115.335 Y97.471 E0.04760 ; perimeter
G1 X115.405 Y97.850 E0.01786 ; perimeter
G1 X115.425 Y98.327 E0.02210 ; perimeter
G1 X115.334 Y98.758 E0.02043 ; perimeter
G1 X115.197 Y98.714 E0.00664 ; perimeter
G1 X115.029 Y98.545 E0.01106 ; perimeter
G1 X114.757 Y98.202 E0.02026 ; perimeter
G1 X114.550 Y98.055 E0.01179 ; perimeter
G1 X114.473 Y97.913 E0.00746 ; perimeter
G1 X114.396 Y97.847 E0.00471 ; perimeter
G1 X114.306 Y97.527 E0.01540 ; perimeter
G1 X114.306 Y97.287 E0.01115 ; perimeter
G1 X114.364 Y97.163 E0.00632 ; perimeter
G1 X114.635 Y96.902 F10800.000 ; move inwards before travel
G1 X114.725 Y96.961 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343149
G1 F2400.000
G1 X114.620 Y96.230 E0.01845 ; infill
G1 X114.763 Y96.880 F10800.000 ; move to first infill point
;WIDTH:0.218883
G1 F2400.000
G1 X114.622 Y96.375 E0.00767 ; infill
;WIDTH:0.21179
G1 X114.531 Y96.115 E0.00386 ; infill
G1 X114.527 Y96.113 F10800.000 ; move to first infill point
;WIDTH:0.122829
G1 F2400.000
G1 X114.543 Y96.198 E0.00058 ; infill
;WIDTH:0.12995
G1 X114.545 Y96.209 E0.00008 ; infill
;WIDTH:0.145962
G1 X114.761 Y96.884 E0.00608 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.545 Y96.209 E-0.18713 ; wipe and retract
;WIPE_END
G1 E-2.21287 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X115.597 Y100.639 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.713 Y100.797 E0.00907 ; perimeter
G1 X115.796 Y101.062 E0.01288 ; perimeter
G1 X115.877 Y101.570 E0.02381 ; perimeter
G1 X115.896 Y102.049 E0.02221 ; perimeter
G1 X115.871 Y102.396 E0.01611 ; perimeter
G1 X115.777 Y102.684 E0.01405 ; perimeter
G1 X115.709 Y102.768 E0.00500 ; perimeter
G1 X115.625 Y102.818 E0.00452 ; perimeter
G1 X115.563 Y102.827 E0.00291 ; perimeter
G1 X115.398 Y102.813 E0.00768 ; perimeter
G1 X115.329 Y102.771 E0.00374 ; perimeter
G1 X115.198 Y102.613 E0.00950 ; perimeter
G1 X115.108 Y102.306 E0.01482 ; perimeter
G1 X115.054 Y101.952 E0.01658 ; perimeter
G1 X115.065 Y101.724 E0.01060 ; perimeter
G1 X115.306 Y100.985 E0.03599 ; perimeter
G1 X115.363 Y100.923 E0.00392 ; perimeter
G1 X115.472 Y100.716 E0.01081 ; perimeter
G1 X115.546 Y100.671 E0.00402 ; perimeter
G1 X115.635 Y100.831 F10800.000 ; move inwards before travel
G1 X115.556 Y101.112 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.354747
G1 F2400.000
G1 X115.473 Y101.792 E0.01776 ; infill
G1 X115.492 Y102.233 E0.01145 ; infill
;WIDTH:0.341425
G1 X115.499 Y102.323 E0.00226 ; infill
;WIDTH:0.314584
G1 X115.487 Y102.579 E0.00578 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.499 Y102.323 E-0.06747 ; wipe and retract
;WIPE_END
G1 E-2.33253 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X115.538 Y109.981 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.626 Y110.012 E0.00431 ; perimeter
G1 X115.802 Y110.164 E0.01077 ; perimeter
G1 X115.864 Y110.297 E0.00680 ; perimeter
G1 X115.883 Y110.489 E0.00892 ; perimeter
G1 X115.861 Y110.649 E0.00750 ; perimeter
G1 X115.789 Y110.791 E0.00735 ; perimeter
G1 X115.691 Y110.880 E0.00616 ; perimeter
G1 X115.568 Y110.927 E0.00607 ; perimeter
G1 X115.360 Y110.913 E0.00967 ; perimeter
G1 X115.262 Y110.860 E0.00517 ; perimeter
G1 X115.147 Y110.713 E0.00862 ; perimeter
G1 X115.079 Y110.544 E0.00845 ; perimeter
G1 X115.069 Y110.468 E0.00357 ; perimeter
G1 X115.162 Y110.196 E0.01331 ; perimeter
G1 X115.247 Y110.083 E0.00656 ; perimeter
G1 X115.406 Y109.991 E0.00850 ; perimeter
G1 X115.478 Y109.986 E0.00334 ; perimeter
G1 X115.575 Y110.066 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.626 Y110.012 E-0.03955 ; wipe and retract
G1 X115.802 Y110.164 E-0.06136 ; wipe and retract
G1 X115.864 Y110.297 E-0.03875 ; wipe and retract
G1 X115.883 Y110.489 E-0.05083 ; wipe and retract
G1 X115.861 Y110.649 E-0.04274 ; wipe and retract
G1 X115.789 Y110.791 E-0.04190 ; wipe and retract
G1 X115.691 Y110.880 E-0.03512 ; wipe and retract
G1 X115.568 Y110.927 E-0.03455 ; wipe and retract
G1 X115.360 Y110.913 E-0.05508 ; wipe and retract
G1 X115.262 Y110.860 E-0.02943 ; wipe and retract
G1 X115.147 Y110.713 E-0.04911 ; wipe and retract
G1 X115.079 Y110.544 E-0.04816 ; wipe and retract
G1 X115.069 Y110.468 E-0.02035 ; wipe and retract
G1 X115.162 Y110.196 E-0.07584 ; wipe and retract
G1 X115.247 Y110.083 E-0.03739 ; wipe and retract
G1 X115.406 Y109.991 E-0.04844 ; wipe and retract
G1 X115.478 Y109.986 E-0.01904 ; wipe and retract
;WIPE_END
G1 E-1.67238 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 X115.102 Y114.984 ; move to first perimeter point
G1 Z4.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.253 Y115.022 E0.00720 ; perimeter
G1 X115.342 Y115.092 E0.00528 ; perimeter
G1 X115.412 Y115.199 E0.00590 ; perimeter
G1 X115.451 Y115.325 E0.00610 ; perimeter
G1 X115.447 Y115.443 E0.00548 ; perimeter
G1 X115.392 Y115.581 E0.00690 ; perimeter
G1 X115.309 Y115.703 E0.00684 ; perimeter
G1 X115.254 Y115.746 E0.00322 ; perimeter
G1 X115.057 Y115.787 E0.00931 ; perimeter
G1 X114.849 Y115.739 E0.00988 ; perimeter
G1 X114.761 Y115.667 E0.00524 ; perimeter
G1 X114.706 Y115.556 E0.00574 ; perimeter
G1 X114.668 Y115.367 E0.00894 ; perimeter
G1 X114.732 Y115.136 E0.01112 ; perimeter
G1 X114.857 Y115.025 E0.00774 ; perimeter
G1 X115.042 Y114.985 E0.00877 ; perimeter
G1 X115.175 Y115.121 F10800.000 ; move inwards before travel
G1 X115.056 Y115.400 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323955
G1 F2400.000
G1 X115.064 Y115.369 E0.00076 ; infill
;LAYER_CHANGE
;Z:4.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.056 Y115.400 E-0.00858 ; wipe and retract
;WIPE_END
G1 E-2.39142 F2400.000 ; retract
G1 Z4.675 F10800.000 ; lift Z
G1 Z4.800 ; move to next layer (23)
;AFTER_LAYER_CHANGE
;4.8
G1 Z4.875 ; lift Z
G1 X96.854 Y108.083 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.758 Y108.263 E0.00945 ; perimeter
G1 X96.591 Y108.401 E0.01004 ; perimeter
G1 X96.466 Y108.438 E0.00603 ; perimeter
G1 X96.169 Y108.370 E0.01412 ; perimeter
G1 X96.061 Y108.284 E0.00636 ; perimeter
G1 X95.958 Y108.093 E0.01007 ; perimeter
G1 X95.947 Y107.932 E0.00748 ; perimeter
G1 X96.018 Y107.735 E0.00969 ; perimeter
G1 X96.147 Y107.631 E0.00768 ; perimeter
G1 X96.303 Y107.589 E0.00751 ; perimeter
G1 X96.480 Y107.596 E0.00820 ; perimeter
G1 X96.638 Y107.661 E0.00791 ; perimeter
G1 X96.793 Y107.817 E0.01016 ; perimeter
G1 X96.860 Y108.024 E0.01008 ; perimeter
G1 X96.663 Y108.154 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.758 Y108.263 E-0.06877 ; wipe and retract
G1 X96.591 Y108.401 E-0.05721 ; wipe and retract
G1 X96.466 Y108.438 E-0.03433 ; wipe and retract
G1 X96.169 Y108.370 E-0.08043 ; wipe and retract
G1 X96.061 Y108.284 E-0.03624 ; wipe and retract
G1 X95.958 Y108.093 E-0.05737 ; wipe and retract
G1 X95.947 Y107.932 E-0.04263 ; wipe and retract
G1 X96.018 Y107.735 E-0.05522 ; wipe and retract
G1 X96.147 Y107.631 E-0.04377 ; wipe and retract
G1 X96.303 Y107.589 E-0.04278 ; wipe and retract
G1 X96.480 Y107.596 E-0.04672 ; wipe and retract
G1 X96.638 Y107.661 E-0.04509 ; wipe and retract
G1 X96.793 Y107.817 E-0.05788 ; wipe and retract
G1 X96.860 Y108.024 E-0.05741 ; wipe and retract
;WIPE_END
G1 E-1.67416 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X94.716 Y112.049 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.862 Y112.147 E0.00815 ; perimeter
G1 X94.957 Y112.339 E0.00990 ; perimeter
G1 X94.957 Y112.476 E0.00638 ; perimeter
G1 X94.880 Y112.752 E0.01324 ; perimeter
G1 X94.864 Y112.966 E0.00995 ; perimeter
G1 X94.781 Y113.205 E0.01174 ; perimeter
G1 X94.761 Y113.416 E0.00983 ; perimeter
G1 X94.938 Y114.105 E0.03294 ; perimeter
G1 X95.047 Y114.669 E0.02660 ; perimeter
G1 X95.079 Y114.728 E0.00311 ; perimeter
G1 X95.096 Y115.041 E0.01451 ; perimeter
G1 X95.239 Y115.243 E0.01146 ; perimeter
G1 X94.789 Y115.244 E0.02086 ; perimeter
G1 X94.553 Y115.213 E0.01101 ; perimeter
G1 X94.415 Y115.150 E0.00704 ; perimeter
G1 X94.217 Y114.963 E0.01264 ; perimeter
G1 X94.129 Y114.706 E0.01258 ; perimeter
G1 X94.125 Y112.514 E0.10152 ; perimeter
G1 X94.219 Y112.195 E0.01540 ; perimeter
G1 X94.317 Y112.114 E0.00589 ; perimeter
G1 X94.582 Y112.017 E0.01310 ; perimeter
G1 X94.658 Y112.035 E0.00360 ; perimeter
G1 X94.748 Y112.222 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.862 Y112.147 E-0.06149 ; wipe and retract
G1 X94.957 Y112.339 E-0.05639 ; wipe and retract
G1 X94.957 Y112.476 E-0.03633 ; wipe and retract
G1 X94.880 Y112.752 E-0.07540 ; wipe and retract
G1 X94.864 Y112.966 E-0.05669 ; wipe and retract
G1 X94.781 Y113.205 E-0.06687 ; wipe and retract
G1 X94.761 Y113.416 E-0.05597 ; wipe and retract
G1 X94.938 Y114.105 E-0.18765 ; wipe and retract
G1 X95.047 Y114.669 E-0.15154 ; wipe and retract
G1 X95.079 Y114.728 E-0.01771 ; wipe and retract
G1 X95.096 Y115.041 E-0.08264 ; wipe and retract
G1 X95.239 Y115.243 E-0.06528 ; wipe and retract
G1 X94.789 Y115.244 E-0.11883 ; wipe and retract
G1 X94.553 Y115.213 E-0.06272 ; wipe and retract
G1 X94.415 Y115.150 E-0.04010 ; wipe and retract
G1 X94.217 Y114.963 E-0.07198 ; wipe and retract
G1 X94.129 Y114.706 E-0.07170 ; wipe and retract
G1 X94.125 Y112.514 E-0.57837 ; wipe and retract
G1 X94.219 Y112.195 E-0.08775 ; wipe and retract
G1 X94.317 Y112.114 E-0.03354 ; wipe and retract
G1 X94.582 Y112.017 E-0.07461 ; wipe and retract
G1 X94.658 Y112.035 E-0.02048 ; wipe and retract
;WIPE_END
G1 E-0.32596 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X95.409 Y115.429 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X96.157 Y115.342 E0.03488 ; perimeter
G1 X96.365 Y115.395 E0.00997 ; perimeter
G1 X96.525 Y115.477 E0.00832 ; perimeter
G1 X96.667 Y115.668 E0.01103 ; perimeter
G1 X96.693 Y115.843 E0.00819 ; perimeter
G1 X96.677 Y115.919 E0.00358 ; perimeter
G1 X96.535 Y116.077 E0.00989 ; perimeter
G1 X96.398 Y116.151 E0.00721 ; perimeter
G1 X96.091 Y116.161 E0.01420 ; perimeter
G1 X95.860 Y116.094 E0.01117 ; perimeter
G1 X95.766 Y116.032 E0.00519 ; perimeter
G1 X95.660 Y115.900 E0.00784 ; perimeter
G1 X95.588 Y115.763 E0.00715 ; perimeter
G1 X95.501 Y115.473 E0.01406 ; perimeter
G1 X95.463 Y115.454 E0.00197 ; perimeter
G1 X95.793 Y115.540 F10800.000 ; move inwards before travel
G1 X94.412 Y114.808 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.390914
G1 F2400.000
G1 X94.594 Y114.699 E0.00613 ; infill
G1 X94.509 Y114.011 E0.02007 ; infill
;WIDTH:0.297653
G1 X94.463 Y113.641 E0.00790 ; infill
;WIDTH:0.204392
G1 X94.438 Y113.428 E0.00287 ; infill
;WIDTH:0.233509
G1 X94.454 Y113.123 E0.00485 ; infill
;WIDTH:0.272786
G1 X94.474 Y113.006 E0.00227 ; infill
;WIDTH:0.292033
G1 X94.518 Y112.580 E0.00888 ; infill
G1 X94.631 Y112.282 E0.00659 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.518 Y112.580 E-0.08390 ; wipe and retract
G1 X94.474 Y113.006 E-0.11311 ; wipe and retract
;WIPE_END
G1 E-2.20299 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X105.318 Y115.545 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.424 Y115.679 E0.00788 ; perimeter
G1 X105.448 Y115.812 E0.00626 ; perimeter
G1 X105.345 Y116.005 E0.01013 ; perimeter
G1 X105.228 Y116.093 E0.00679 ; perimeter
G1 X104.894 Y116.186 E0.01604 ; perimeter
G1 X103.331 Y116.136 E0.07244 ; perimeter
G1 X102.661 Y116.160 E0.03109 ; perimeter
G1 X102.120 Y116.146 E0.02502 ; perimeter
G1 X101.518 Y116.079 E0.02810 ; perimeter
G1 X101.385 Y116.030 E0.00656 ; perimeter
G1 X101.139 Y115.997 E0.01150 ; perimeter
G1 X100.958 Y115.925 E0.00899 ; perimeter
G1 X100.884 Y115.857 E0.00468 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.852 Y115.828 E0.00181 ; perimeter (bridge)
G1 X100.880 Y115.753 E0.00332 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.894 Y115.718 E0.00175 ; perimeter
G1 X101.133 Y115.596 E0.01247 ; perimeter
G1 X101.916 Y115.461 E0.03679 ; perimeter
G1 X102.780 Y115.431 E0.04006 ; perimeter
G1 X103.764 Y115.471 E0.04562 ; perimeter
G1 X104.073 Y115.443 E0.01436 ; perimeter
G1 X104.175 Y115.406 E0.00505 ; perimeter
G1 X104.846 Y115.386 E0.03107 ; perimeter
G1 X105.243 Y115.480 E0.01890 ; perimeter
G1 X105.273 Y115.506 E0.00186 ; perimeter
G1 X105.287 Y115.713 F10800.000 ; move inwards before travel
G1 X105.185 Y115.804 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.354704
G1 F2400.000
G1 X104.827 Y115.786 E0.00929 ; infill
G1 X104.346 Y115.790 E0.01246 ; infill
;WIDTH:0.340334
G1 X104.249 Y115.790 E0.00241 ; infill
;WIDTH:0.333153
G1 X104.170 Y115.802 E0.00193 ; infill
;WIDTH:0.302155
G1 X104.137 Y115.805 E0.00071 ; infill
;WIDTH:0.293511
G1 X103.779 Y115.813 E0.00745 ; infill
;WIDTH:0.245581
G1 X103.329 Y115.795 E0.00760 ; infill
G1 X101.950 Y115.795 E0.02323 ; infill
;WIDTH:0.230343
G1 X101.790 Y115.802 E0.00250 ; infill
;WIDTH:0.189326
G1 X101.648 Y115.803 E0.00173 ; infill
;WIDTH:0.157219
G1 X101.505 Y115.805 E0.00135 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.648 Y115.803 E-0.03756 ; wipe and retract
;WIPE_END
G1 E-2.36244 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X114.698 Y115.528 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.669 Y115.357 E0.00805 ; perimeter
G1 X114.727 Y115.145 E0.01018 ; perimeter
G1 X114.852 Y115.025 E0.00801 ; perimeter
G1 X115.064 Y114.980 E0.01006 ; perimeter
G1 X115.261 Y115.023 E0.00933 ; perimeter
G1 X115.337 Y115.083 E0.00449 ; perimeter
G1 X115.420 Y115.208 E0.00694 ; perimeter
G1 X115.457 Y115.325 E0.00568 ; perimeter
G1 X115.450 Y115.437 E0.00524 ; perimeter
G1 X115.391 Y115.585 E0.00737 ; perimeter
G1 X115.309 Y115.702 E0.00658 ; perimeter
G1 X115.247 Y115.750 E0.00368 ; perimeter
G1 X115.076 Y115.788 E0.00808 ; perimeter
G1 X114.907 Y115.760 E0.00794 ; perimeter
G1 X114.769 Y115.670 E0.00763 ; perimeter
G1 X114.717 Y115.585 E0.00462 ; perimeter
G1 X114.809 Y115.394 F10800.000 ; move inwards before travel
G1 X115.064 Y115.368 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.329056
G1 F2400.000
G1 X115.056 Y115.400 E0.00079 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.064 Y115.368 E-0.00882 ; wipe and retract
;WIPE_END
G1 E-2.39118 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X115.534 Y109.883 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.653 Y109.926 E0.00587 ; perimeter
G1 X115.797 Y110.057 E0.00903 ; perimeter
G1 X115.865 Y110.199 E0.00728 ; perimeter
G1 X115.885 Y110.391 E0.00893 ; perimeter
G1 X115.859 Y110.566 E0.00820 ; perimeter
G1 X115.787 Y110.700 E0.00705 ; perimeter
G1 X115.691 Y110.787 E0.00602 ; perimeter
G1 X115.584 Y110.829 E0.00531 ; perimeter
G1 X115.362 Y110.821 E0.01028 ; perimeter
G1 X115.266 Y110.771 E0.00500 ; perimeter
G1 X115.153 Y110.619 E0.00879 ; perimeter
G1 X115.082 Y110.405 E0.01045 ; perimeter
G1 X115.080 Y110.340 E0.00301 ; perimeter
G1 X115.157 Y110.117 E0.01093 ; perimeter
G1 X115.251 Y109.988 E0.00740 ; perimeter
G1 X115.426 Y109.892 E0.00923 ; perimeter
G1 X115.474 Y109.888 E0.00225 ; perimeter
G1 X115.585 Y109.999 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.653 Y109.926 E-0.04835 ; wipe and retract
G1 X115.797 Y110.057 E-0.05145 ; wipe and retract
G1 X115.865 Y110.199 E-0.04148 ; wipe and retract
G1 X115.885 Y110.391 E-0.05088 ; wipe and retract
G1 X115.859 Y110.566 E-0.04672 ; wipe and retract
G1 X115.787 Y110.700 E-0.04014 ; wipe and retract
G1 X115.691 Y110.787 E-0.03430 ; wipe and retract
G1 X115.584 Y110.829 E-0.03025 ; wipe and retract
G1 X115.362 Y110.821 E-0.05858 ; wipe and retract
G1 X115.266 Y110.771 E-0.02849 ; wipe and retract
G1 X115.153 Y110.619 E-0.05008 ; wipe and retract
G1 X115.082 Y110.405 E-0.05954 ; wipe and retract
G1 X115.080 Y110.340 E-0.01713 ; wipe and retract
G1 X115.157 Y110.117 E-0.06229 ; wipe and retract
G1 X115.251 Y109.988 E-0.04214 ; wipe and retract
G1 X115.426 Y109.892 E-0.05259 ; wipe and retract
G1 X115.474 Y109.888 E-0.01281 ; wipe and retract
;WIPE_END
G1 E-1.67278 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X115.552 Y102.941 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.372 Y102.902 E0.00851 ; perimeter
G1 X115.288 Y102.846 E0.00468 ; perimeter
G1 X115.170 Y102.690 E0.00907 ; perimeter
G1 X115.041 Y102.415 E0.01407 ; perimeter
G1 X114.960 Y101.926 E0.02295 ; perimeter
G1 X115.059 Y101.488 E0.02078 ; perimeter
G1 X115.379 Y101.166 E0.02102 ; perimeter
G1 X115.416 Y101.166 E0.00175 ; perimeter
G1 X115.557 Y101.066 E0.00801 ; perimeter
G1 X115.675 Y101.152 E0.00677 ; perimeter
G1 X115.763 Y101.337 E0.00948 ; perimeter
G1 X115.862 Y101.815 E0.02260 ; perimeter
G1 X115.894 Y102.261 E0.02072 ; perimeter
G1 X115.838 Y102.691 E0.02011 ; perimeter
G1 X115.734 Y102.862 E0.00926 ; perimeter
G1 X115.609 Y102.921 E0.00641 ; perimeter
G1 X115.445 Y102.791 F10800.000 ; move inwards before travel
G1 X115.476 Y102.682 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.432056
G1 F2400.000
G1 X115.457 Y102.260 E0.01366 ; infill
G1 X115.417 Y101.925 E0.01093 ; infill
G1 X115.411 Y101.489 E0.01409 ; infill
G1 X115.531 Y101.408 F10800.000 ; move to first infill point
;WIDTH:0.280228
G1 F2400.000
G1 X115.487 Y101.522 E0.00242 ; infill
;WIDTH:0.308708
G1 X115.443 Y101.637 E0.00271 ; infill
;WIDTH:0.353567
G1 X115.427 Y101.670 E0.00094 ; infill
;WIDTH:0.367253
G1 X115.264 Y102.287 E0.01721 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.427 Y101.670 E-0.16836 ; wipe and retract
;WIPE_END
G1 E-2.23164 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X114.805 Y97.614 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.666 Y97.539 E0.00534 ; perimeter
G1 X114.761 Y97.312 E0.00835 ; perimeter
G1 X114.798 Y97.554 E0.00830 ; perimeter
G1 X114.675 Y96.148 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.786 Y96.236 E0.00656 ; perimeter
G1 X114.934 Y96.420 E0.01095 ; perimeter
G1 X115.081 Y96.740 E0.01629 ; perimeter
G1 X115.247 Y97.247 E0.02470 ; perimeter
G1 X115.297 Y97.664 E0.01946 ; perimeter
G1 X115.267 Y98.091 E0.01985 ; perimeter
G1 X115.223 Y98.236 E0.00702 ; perimeter
G1 X115.136 Y98.317 E0.00550 ; perimeter
G1 X115.012 Y98.220 E0.00732 ; perimeter
G1 X114.928 Y98.212 E0.00389 ; perimeter
G1 X114.814 Y98.100 E0.00739 ; perimeter
G1 X114.629 Y98.078 E0.00863 ; perimeter
G1 X114.515 Y98.007 E0.00620 ; perimeter
G1 X114.322 Y97.986 E0.00900 ; perimeter
G1 X114.225 Y97.892 E0.00625 ; perimeter
G1 X114.169 Y97.636 E0.01214 ; perimeter
G1 X114.199 Y97.383 E0.01177 ; perimeter
G1 X114.326 Y97.104 E0.01421 ; perimeter
G1 X114.263 Y96.936 E0.00833 ; perimeter
G1 X114.386 Y96.687 E0.01287 ; perimeter
G1 X114.384 Y96.450 E0.01096 ; perimeter
G1 X114.490 Y96.118 E0.01616 ; perimeter
G1 X114.616 Y96.138 E0.00590 ; perimeter
G1 X114.723 Y96.281 F10800.000 ; move inwards before travel
G1 X114.556 Y97.029 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.164495
G1 F2400.000
G1 X114.680 Y96.768 E0.00293 ; infill
G1 X114.743 Y96.581 E0.00199 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.680 Y96.768 E-0.05206 ; wipe and retract
G1 X114.556 Y97.029 E-0.07641 ; wipe and retract
;WIPE_END
G1 E-2.27154 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X111.352 Y96.440 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.383 Y96.632 E0.00899 ; perimeter
G1 X111.468 Y96.908 E0.01338 ; perimeter
G1 X111.501 Y97.089 E0.00853 ; perimeter
G1 X111.491 Y97.405 E0.01462 ; perimeter
G1 X111.436 Y97.585 E0.00876 ; perimeter
G1 X111.396 Y97.615 E0.00229 ; perimeter
G1 X111.206 Y97.646 E0.00891 ; perimeter
G1 X110.890 Y97.466 E0.01685 ; perimeter
G1 X110.812 Y97.368 E0.00581 ; perimeter
G1 X110.701 Y97.138 E0.01182 ; perimeter
G1 X110.686 Y97.029 E0.00511 ; perimeter
G1 X110.619 Y96.863 E0.00827 ; perimeter
G1 X110.615 Y96.722 E0.00655 ; perimeter
G1 X110.673 Y96.514 E0.00999 ; perimeter
G1 X110.774 Y96.425 E0.00625 ; perimeter
G1 X111.000 Y96.351 E0.01102 ; perimeter
G1 X111.249 Y96.369 E0.01156 ; perimeter
G1 X111.302 Y96.406 E0.00301 ; perimeter
G1 X111.259 Y96.611 F10800.000 ; move inwards before travel
G1 X111.105 Y96.600 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.257547
G1 F2400.000
G1 X111.042 Y96.704 E0.00217 ; infill
;WIDTH:0.28657
G1 X111.031 Y96.723 E0.00043 ; infill
;WIDTH:0.316179
G1 X111.021 Y96.741 E0.00048 ; infill
;WIDTH:0.343602
G1 X111.014 Y96.780 E0.00099 ; infill
G1 X111.070 Y96.946 E0.00437 ; infill
;WIDTH:0.353903
G1 X111.197 Y97.365 E0.01134 ; infill
G1 X111.180 Y97.356 F10800.000 ; move to first infill point
;WIDTH:0.295026
G1 F2400.000
G1 X110.958 Y96.618 E0.01614 ; infill
G1 X110.864 Y96.725 F10800.000 ; move to first infill point
;WIDTH:0.185433
G1 F2400.000
G1 X111.240 Y97.391 E0.00905 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.864 Y96.725 E-0.20163 ; wipe and retract
;WIPE_END
G1 E-2.19837 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X108.032 Y98.185 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.015 Y98.048 E0.00638 ; perimeter
G1 X107.932 Y97.939 E0.00635 ; perimeter
G1 X107.909 Y97.766 E0.00806 ; perimeter
G1 X107.927 Y97.512 E0.01180 ; perimeter
G1 X107.953 Y97.425 E0.00422 ; perimeter
G1 X108.087 Y97.254 E0.01009 ; perimeter
G1 X108.237 Y97.190 E0.00757 ; perimeter
G1 X108.435 Y97.219 E0.00923 ; perimeter
G1 X108.499 Y97.254 E0.00340 ; perimeter
G1 X108.588 Y97.350 E0.00606 ; perimeter
G1 X108.638 Y97.448 E0.00512 ; perimeter
G1 X108.675 Y97.593 E0.00692 ; perimeter
G1 X108.673 Y97.926 E0.01542 ; perimeter
G1 X108.613 Y98.099 E0.00847 ; perimeter
G1 X108.454 Y98.254 E0.01032 ; perimeter
G1 X108.377 Y98.283 E0.00380 ; perimeter
G1 X108.130 Y98.244 E0.01155 ; perimeter
G1 X108.083 Y98.216 E0.00256 ; perimeter
G1 X108.102 Y98.066 F10800.000 ; move inwards before travel
G1 X108.292 Y98.026 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.189745
G1 F2400.000
G1 X108.320 Y97.946 E0.00104 ; infill
;WIDTH:0.220386
G1 X108.327 Y97.917 E0.00044 ; infill
;WIDTH:0.239359
G1 X108.325 Y97.895 E0.00036 ; infill
;WIDTH:0.276766
G1 X108.253 Y97.445 E0.00886 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.325 Y97.895 E-0.12022 ; wipe and retract
;WIPE_END
G1 E-2.27978 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X104.467 Y100.298 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.195 Y100.493 E0.01133 ; perimeter
G1 X104.411 Y100.320 E0.00938 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.195 Y100.493 E-0.07315 ; wipe and retract
G1 X104.411 Y100.320 E-0.07315 ; wipe and retract
;WIPE_END
G1 E-2.25370 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X99.043 Y105.182 ; move to first perimeter point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.992 Y104.813 E0.01725 ; perimeter
G1 X99.051 Y104.581 E0.01110 ; perimeter
G1 X99.133 Y104.474 E0.00625 ; perimeter
G1 X99.662 Y104.057 E0.03120 ; perimeter
G1 X100.205 Y103.548 E0.03448 ; perimeter
G1 X100.470 Y103.390 E0.01426 ; perimeter
G1 X100.671 Y103.320 E0.00985 ; perimeter
G1 X100.884 Y103.322 E0.00985 ; perimeter
G1 X100.986 Y103.265 E0.00542 ; perimeter
G1 X101.244 Y103.255 E0.01196 ; perimeter
G1 X101.523 Y103.145 E0.01389 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.639 Y103.100 E0.00523 ; perimeter (bridge)
G1 X101.975 Y102.698 E0.02190 ; perimeter (bridge)
G1 X102.133 Y102.438 E0.01270 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.253 Y102.242 E0.01067 ; perimeter
G1 X102.475 Y101.989 E0.01559 ; perimeter
G1 X102.697 Y101.654 E0.01858 ; perimeter
G1 X103.102 Y101.169 E0.02929 ; perimeter
G1 X103.364 Y100.817 E0.02030 ; perimeter
G1 X103.494 Y100.712 E0.00774 ; perimeter
G1 X103.811 Y100.196 E0.02806 ; perimeter
G1 X103.916 Y100.083 E0.00713 ; perimeter
G1 X104.196 Y99.882 E0.01597 ; perimeter
G1 X104.475 Y99.785 E0.01371 ; perimeter
G1 X104.555 Y99.786 E0.00370 ; perimeter
G1 X104.920 Y99.707 E0.01729 ; perimeter
G1 X105.000 Y99.720 E0.00377 ; perimeter
G1 X105.453 Y99.642 E0.02130 ; perimeter
G1 X105.936 Y99.696 E0.02247 ; perimeter
G1 X105.975 Y99.740 E0.00273 ; perimeter
G1 X105.958 Y99.855 E0.00537 ; perimeter
G1 X105.726 Y100.129 E0.01664 ; perimeter
G1 X105.378 Y100.368 E0.01952 ; perimeter
G1 X104.871 Y100.601 E0.02586 ; perimeter
G1 X104.377 Y100.956 E0.02818 ; perimeter
G1 X104.259 Y101.077 E0.00783 ; perimeter
G1 X103.764 Y101.491 E0.02989 ; perimeter
G1 X103.512 Y101.672 E0.01436 ; perimeter
G1 X103.032 Y102.086 E0.02936 ; perimeter
G1 X102.583 Y102.431 E0.02624 ; perimeter
G1 X102.346 Y102.583 E0.01303 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.685 Y103.119 E0.03558 ; perimeter (bridge)
G1 X101.599 Y103.252 E0.00660 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.178 Y103.896 E0.03567 ; perimeter
G1 X100.941 Y104.088 E0.01414 ; perimeter
G1 X100.653 Y104.222 E0.01470 ; perimeter
G1 X100.542 Y104.296 E0.00617 ; perimeter
G1 X100.291 Y104.393 E0.01247 ; perimeter
G1 X99.977 Y104.712 E0.02073 ; perimeter
G1 X99.916 Y104.913 E0.00970 ; perimeter
G1 X99.818 Y105.015 E0.00657 ; perimeter
G1 X99.771 Y105.116 E0.00517 ; perimeter
G1 X99.651 Y105.226 E0.00753 ; perimeter
G1 X99.496 Y105.295 E0.00784 ; perimeter
G1 X99.332 Y105.312 E0.00762 ; perimeter
G1 X98.903 Y105.423 E0.02055 ; perimeter
G1 X99.013 Y105.234 E0.01011 ; perimeter
G1 X99.245 Y104.869 F10800.000 ; move inwards before travel
G1 X97.695 Y106.296 ; move to first perimeter point
G1 F1800.000
G1 X97.647 Y106.200 E0.00500 ; perimeter
G1 X97.636 Y106.061 E0.00643 ; perimeter
G1 X97.704 Y105.883 E0.00881 ; perimeter
G1 X97.885 Y105.714 E0.01149 ; perimeter
G1 X98.132 Y105.625 E0.01216 ; perimeter
G1 X98.753 Y105.632 E0.02875 ; perimeter
G1 X98.626 Y106.193 E0.02665 ; perimeter
G1 X98.406 Y106.404 E0.01413 ; perimeter
G1 X98.084 Y106.493 E0.01545 ; perimeter
G1 X97.847 Y106.423 E0.01145 ; perimeter
G1 X97.744 Y106.330 E0.00643 ; perimeter
G1 X97.734 Y106.196 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.647 Y106.200 E-0.04296 ; wipe and retract
G1 X97.636 Y106.061 E-0.03664 ; wipe and retract
G1 X97.704 Y105.883 E-0.05017 ; wipe and retract
G1 X97.885 Y105.714 E-0.06545 ; wipe and retract
G1 X98.132 Y105.625 E-0.06925 ; wipe and retract
G1 X98.753 Y105.632 E-0.16380 ; wipe and retract
G1 X98.626 Y106.193 E-0.15183 ; wipe and retract
G1 X98.406 Y106.404 E-0.08052 ; wipe and retract
G1 X98.084 Y106.493 E-0.08802 ; wipe and retract
G1 X97.847 Y106.423 E-0.06525 ; wipe and retract
G1 X97.744 Y106.330 E-0.03664 ; wipe and retract
;WIPE_END
G1 E-1.54947 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X99.259 Y104.984 ; move to first infill point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.24141
G1 F2400.000
G1 X99.679 Y104.502 E0.01055 ; infill
G1 X100.119 Y104.095 E0.00990 ; infill
;WIDTH:0.277403
G1 X100.200 Y104.044 E0.00185 ; infill
;WIDTH:0.313395
G1 X100.280 Y103.994 E0.00213 ; infill
;WIDTH:0.349388
G1 X100.360 Y103.943 E0.00242 ; infill
;WIDTH:0.369743
G1 X100.466 Y103.863 E0.00361 ; infill
;WIDTH:0.381785
G1 X101.149 Y103.500 E0.02179 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.466 Y103.863 E-0.20407 ; wipe and retract
;WIPE_END
G1 E-2.19593 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 X102.862 Y101.883 ; move to first infill point
G1 Z4.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.112798
G1 F2400.000
G1 X102.919 Y101.819 E0.00049 ; infill
;WIDTH:0.158751
G1 X103.114 Y101.620 E0.00269 ; infill
;WIDTH:0.206152
G1 X103.315 Y101.417 E0.00388 ; infill
;WIDTH:0.222737
G1 X103.363 Y101.372 E0.00099 ; infill
;WIDTH:0.259817
G1 X103.451 Y101.286 E0.00221 ; infill
;WIDTH:0.296896
G1 X103.538 Y101.200 E0.00258 ; infill
;WIDTH:0.337794
G1 X103.804 Y100.951 E0.00893 ; infill
;WIDTH:0.367338
G1 X103.921 Y100.814 E0.00487 ; infill
;WIDTH:0.39688
G1 X104.039 Y100.678 E0.00531 ; infill
G1 X104.689 Y100.204 F10800.000 ; move to first infill point
;WIDTH:0.331498
G1 F2400.000
G1 X105.573 Y99.936 E0.02216 ; infill
;LAYER_CHANGE
;Z:5
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;5
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.689 Y100.204 E-0.24368 ; wipe and retract
;WIPE_END
G1 E-2.15632 F2400.000 ; retract
G1 Z4.875 F10800.000 ; lift Z
G1 Z5.000 ; move to next layer (24)
;AFTER_LAYER_CHANGE
;5
G1 Z5.075 ; lift Z
G1 X96.833 Y107.679 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.962 Y107.839 E0.00952 ; perimeter
G1 X96.980 Y107.994 E0.00722 ; perimeter
G1 X96.977 Y108.092 E0.00454 ; perimeter
G1 X96.854 Y108.280 E0.01040 ; perimeter
G1 X96.675 Y108.437 E0.01102 ; perimeter
G1 X96.527 Y108.483 E0.00722 ; perimeter
G1 X96.229 Y108.413 E0.01415 ; perimeter
G1 X96.123 Y108.320 E0.00656 ; perimeter
G1 X96.041 Y108.180 E0.00752 ; perimeter
G1 X96.018 Y108.100 E0.00385 ; perimeter
G1 X96.010 Y107.959 E0.00653 ; perimeter
G1 X96.100 Y107.745 E0.01073 ; perimeter
G1 X96.242 Y107.627 E0.00856 ; perimeter
G1 X96.446 Y107.583 E0.00967 ; perimeter
G1 X96.621 Y107.634 E0.00845 ; perimeter
G1 X96.759 Y107.632 E0.00641 ; perimeter
G1 X96.783 Y107.647 E0.00128 ; perimeter
G1 X96.804 Y107.883 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.962 Y107.839 E-0.06946 ; wipe and retract
G1 X96.980 Y107.994 E-0.04116 ; wipe and retract
G1 X96.977 Y108.092 E-0.02587 ; wipe and retract
G1 X96.854 Y108.280 E-0.05924 ; wipe and retract
G1 X96.675 Y108.437 E-0.06276 ; wipe and retract
G1 X96.527 Y108.483 E-0.04111 ; wipe and retract
G1 X96.229 Y108.413 E-0.08058 ; wipe and retract
G1 X96.123 Y108.320 E-0.03738 ; wipe and retract
G1 X96.041 Y108.180 E-0.04286 ; wipe and retract
G1 X96.018 Y108.100 E-0.02194 ; wipe and retract
G1 X96.010 Y107.959 E-0.03719 ; wipe and retract
G1 X96.100 Y107.745 E-0.06112 ; wipe and retract
G1 X96.242 Y107.627 E-0.04878 ; wipe and retract
G1 X96.446 Y107.583 E-0.05511 ; wipe and retract
G1 X96.621 Y107.634 E-0.04815 ; wipe and retract
G1 X96.759 Y107.632 E-0.03653 ; wipe and retract
G1 X96.783 Y107.647 E-0.00729 ; wipe and retract
;WIPE_END
G1 E-1.62347 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X94.808 Y111.979 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.907 Y112.062 E0.00599 ; perimeter
G1 X95.005 Y112.275 E0.01087 ; perimeter
G1 X94.990 Y112.442 E0.00777 ; perimeter
G1 X94.932 Y112.654 E0.01015 ; perimeter
G1 X94.863 Y112.750 E0.00548 ; perimeter
G1 X94.780 Y112.964 E0.01062 ; perimeter
G1 X94.634 Y113.072 E0.00844 ; perimeter
G1 X94.691 Y113.332 E0.01233 ; perimeter
G1 X94.681 Y113.445 E0.00526 ; perimeter
G1 X94.717 Y113.606 E0.00763 ; perimeter
G1 X94.877 Y113.894 E0.01527 ; perimeter
G1 X94.959 Y114.105 E0.01049 ; perimeter
G1 X95.052 Y114.506 E0.01909 ; perimeter
G1 X95.005 Y114.650 E0.00700 ; perimeter
G1 X95.022 Y114.867 E0.01010 ; perimeter
G1 X94.986 Y114.953 E0.00431 ; perimeter
G1 X94.915 Y115.028 E0.00480 ; perimeter
G1 X94.647 Y115.114 E0.01301 ; perimeter
G1 X94.520 Y115.101 E0.00592 ; perimeter
G1 X94.395 Y115.047 E0.00630 ; perimeter
G1 X94.212 Y114.839 E0.01285 ; perimeter
G1 X94.164 Y114.593 E0.01161 ; perimeter
G1 X94.184 Y113.912 E0.03154 ; perimeter
G1 X94.316 Y113.269 E0.03044 ; perimeter
G1 X94.201 Y112.929 E0.01658 ; perimeter
G1 X94.155 Y112.521 E0.01903 ; perimeter
G1 X94.244 Y112.166 E0.01698 ; perimeter
G1 X94.353 Y112.049 E0.00741 ; perimeter
G1 X94.625 Y111.953 E0.01334 ; perimeter
G1 X94.749 Y111.970 E0.00578 ; perimeter
G1 X94.822 Y112.107 F10800.000 ; move inwards before travel
G1 X94.719 Y112.232 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333236
G1 F2400.000
G1 X94.597 Y112.381 E0.00466 ; infill
G1 X94.541 Y112.547 E0.00423 ; infill
;WIDTH:0.320971
G1 X94.473 Y112.891 E0.00811 ; infill
G1 X94.530 Y113.766 F10800.000 ; move to first infill point
;WIDTH:0.383281
G1 F2400.000
G1 X94.623 Y114.869 E0.03133 ; infill
G1 X95.717 Y115.558 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.841 Y115.454 E0.00751 ; perimeter
G1 X96.100 Y115.359 E0.01277 ; perimeter
G1 X96.305 Y115.336 E0.00955 ; perimeter
G1 X96.415 Y115.364 E0.00526 ; perimeter
G1 X96.743 Y115.532 E0.01708 ; perimeter
G1 X96.927 Y115.781 E0.01436 ; perimeter
G1 X96.881 Y115.909 E0.00628 ; perimeter
G1 X96.723 Y116.072 E0.01052 ; perimeter
G1 X96.596 Y116.156 E0.00706 ; perimeter
G1 X96.173 Y116.164 E0.01963 ; perimeter
G1 X95.935 Y116.089 E0.01155 ; perimeter
G1 X95.849 Y116.033 E0.00473 ; perimeter
G1 X95.741 Y115.888 E0.00840 ; perimeter
G1 X95.723 Y115.837 E0.00251 ; perimeter
G1 X95.733 Y115.747 E0.00420 ; perimeter
G1 X95.702 Y115.617 E0.00619 ; perimeter
G1 X95.879 Y115.567 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.841 Y115.454 E-0.05640 ; wipe and retract
G1 X96.100 Y115.359 E-0.07272 ; wipe and retract
G1 X96.305 Y115.336 E-0.05438 ; wipe and retract
G1 X96.415 Y115.364 E-0.02998 ; wipe and retract
G1 X96.743 Y115.532 E-0.09730 ; wipe and retract
G1 X96.927 Y115.781 E-0.08180 ; wipe and retract
G1 X96.881 Y115.909 E-0.03580 ; wipe and retract
G1 X96.723 Y116.072 E-0.05993 ; wipe and retract
G1 X96.596 Y116.156 E-0.04020 ; wipe and retract
G1 X96.173 Y116.164 E-0.11182 ; wipe and retract
G1 X95.935 Y116.089 E-0.06581 ; wipe and retract
G1 X95.849 Y116.033 E-0.02696 ; wipe and retract
G1 X95.741 Y115.888 E-0.04786 ; wipe and retract
G1 X95.723 Y115.837 E-0.01430 ; wipe and retract
G1 X95.733 Y115.747 E-0.02395 ; wipe and retract
G1 X95.702 Y115.617 E-0.03524 ; wipe and retract
;WIPE_END
G1 E-1.54555 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X103.872 Y115.620 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.296 Y115.507 E0.02032 ; perimeter
G1 X104.593 Y115.396 E0.01468 ; perimeter
G1 X105.026 Y115.383 E0.02007 ; perimeter
G1 X105.171 Y115.401 E0.00677 ; perimeter
G1 X105.449 Y115.477 E0.01336 ; perimeter
G1 X105.568 Y115.563 E0.00679 ; perimeter
G1 X105.657 Y115.671 E0.00647 ; perimeter
G1 X105.691 Y115.783 E0.00541 ; perimeter
G1 X105.669 Y115.869 E0.00413 ; perimeter
G1 X105.522 Y116.047 E0.01068 ; perimeter
G1 X105.444 Y116.093 E0.00423 ; perimeter
G1 X105.083 Y116.186 E0.01729 ; perimeter
G1 X104.610 Y116.178 E0.02190 ; perimeter
G1 X104.155 Y116.037 E0.02207 ; perimeter
G1 X103.720 Y115.999 E0.02023 ; perimeter
G1 X103.186 Y116.068 E0.02492 ; perimeter
G1 X102.870 Y116.131 E0.01494 ; perimeter
G1 X101.746 Y116.161 E0.05207 ; perimeter
G1 X101.012 Y116.099 E0.03413 ; perimeter
G1 X100.830 Y116.064 E0.00857 ; perimeter
G1 X100.344 Y115.919 E0.02353 ; perimeter
G1 X100.305 Y115.887 E0.00232 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.201 Y115.786 E0.00604 ; perimeter (bridge)
G1 X100.240 Y115.739 E0.00258 ; perimeter (bridge)
G1 X100.376 Y115.671 E0.00638 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.530 Y115.595 E0.00795 ; perimeter
G1 X101.315 Y115.460 E0.03691 ; perimeter
G1 X102.233 Y115.429 E0.04255 ; perimeter
G1 X103.045 Y115.474 E0.03766 ; perimeter
G1 X103.813 Y115.610 E0.03614 ; perimeter
G1 X104.118 Y115.936 F10800.000 ; move inwards before travel
G1 X103.302 Y115.787 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.137457
G1 F2400.000
G1 X103.009 Y115.785 E0.00230 ; infill
;WIDTH:0.230719
G1 X101.201 Y115.799 E0.02824 ; infill
;WIDTH:0.19079
G1 X101.052 Y115.806 E0.00183 ; infill
;WIDTH:0.153048
G1 X100.960 Y115.805 E0.00084 ; infill
;WIDTH:0.124984
G1 X100.868 Y115.804 E0.00063 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.960 Y115.805 E-0.02426 ; wipe and retract
;WIPE_END
G1 E-2.37574 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X104.347 Y115.743 ; move to first infill point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.346319
G1 F2400.000
G1 X104.673 Y115.787 E0.00830 ; infill
;WIDTH:0.359394
G1 X105.420 Y115.762 E0.01968 ; infill
G1 X105.311 Y115.792 F10800.000 ; move to first infill point
;WIDTH:0.217449
G1 F2400.000
G1 X104.685 Y115.635 E0.00937 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.311 Y115.792 E-0.17030 ; wipe and retract
;WIPE_END
G1 E-2.22970 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X114.690 Y115.500 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.670 Y115.347 E0.00717 ; perimeter
G1 X114.723 Y115.150 E0.00943 ; perimeter
G1 X114.846 Y115.026 E0.00808 ; perimeter
G1 X114.906 Y115.000 E0.00303 ; perimeter
G1 X115.060 Y114.978 E0.00723 ; perimeter
G1 X115.268 Y115.024 E0.00988 ; perimeter
G1 X115.334 Y115.075 E0.00386 ; perimeter
G1 X115.428 Y115.216 E0.00780 ; perimeter
G1 X115.463 Y115.324 E0.00530 ; perimeter
G1 X115.454 Y115.429 E0.00487 ; perimeter
G1 X115.372 Y115.621 E0.00967 ; perimeter
G1 X115.246 Y115.750 E0.00832 ; perimeter
G1 X115.067 Y115.787 E0.00847 ; perimeter
G1 X114.847 Y115.730 E0.01051 ; perimeter
G1 X114.773 Y115.669 E0.00446 ; perimeter
G1 X114.709 Y115.557 E0.00597 ; perimeter
G1 X114.797 Y115.388 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.670 Y115.347 E-0.05645 ; wipe and retract
G1 X114.723 Y115.150 E-0.05374 ; wipe and retract
G1 X114.846 Y115.026 E-0.04600 ; wipe and retract
G1 X114.906 Y115.000 E-0.01724 ; wipe and retract
G1 X115.060 Y114.978 E-0.04119 ; wipe and retract
G1 X115.268 Y115.024 E-0.05630 ; wipe and retract
G1 X115.334 Y115.075 E-0.02200 ; wipe and retract
G1 X115.428 Y115.216 E-0.04445 ; wipe and retract
G1 X115.463 Y115.324 E-0.03022 ; wipe and retract
G1 X115.454 Y115.429 E-0.02772 ; wipe and retract
G1 X115.372 Y115.621 E-0.05508 ; wipe and retract
G1 X115.246 Y115.750 E-0.04743 ; wipe and retract
G1 X115.067 Y115.787 E-0.04824 ; wipe and retract
G1 X114.847 Y115.730 E-0.05986 ; wipe and retract
G1 X114.773 Y115.669 E-0.02540 ; wipe and retract
G1 X114.709 Y115.557 E-0.03402 ; wipe and retract
;WIPE_END
G1 E-1.73466 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X115.586 Y110.734 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.423 Y110.733 E0.00757 ; perimeter
G1 X115.247 Y110.648 E0.00906 ; perimeter
G1 X115.159 Y110.525 E0.00699 ; perimeter
G1 X115.088 Y110.243 E0.01348 ; perimeter
G1 X115.153 Y110.035 E0.01007 ; perimeter
G1 X115.241 Y109.903 E0.00737 ; perimeter
G1 X115.440 Y109.795 E0.01049 ; perimeter
G1 X115.532 Y109.788 E0.00428 ; perimeter
G1 X115.657 Y109.832 E0.00615 ; perimeter
G1 X115.796 Y109.956 E0.00860 ; perimeter
G1 X115.867 Y110.101 E0.00750 ; perimeter
G1 X115.888 Y110.294 E0.00900 ; perimeter
G1 X115.863 Y110.462 E0.00787 ; perimeter
G1 X115.783 Y110.609 E0.00776 ; perimeter
G1 X115.642 Y110.712 E0.00809 ; perimeter
G1 X115.471 Y110.618 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.423 Y110.733 E-0.05817 ; wipe and retract
G1 X115.247 Y110.648 E-0.05163 ; wipe and retract
G1 X115.159 Y110.525 E-0.03981 ; wipe and retract
G1 X115.088 Y110.243 E-0.07681 ; wipe and retract
G1 X115.153 Y110.035 E-0.05734 ; wipe and retract
G1 X115.241 Y109.903 E-0.04199 ; wipe and retract
G1 X115.440 Y109.795 E-0.05975 ; wipe and retract
G1 X115.532 Y109.788 E-0.02436 ; wipe and retract
G1 X115.657 Y109.832 E-0.03502 ; wipe and retract
G1 X115.796 Y109.956 E-0.04898 ; wipe and retract
G1 X115.867 Y110.101 E-0.04274 ; wipe and retract
G1 X115.888 Y110.294 E-0.05129 ; wipe and retract
G1 X115.863 Y110.462 E-0.04484 ; wipe and retract
G1 X115.783 Y110.609 E-0.04419 ; wipe and retract
G1 X115.642 Y110.712 E-0.04611 ; wipe and retract
;WIPE_END
G1 E-1.67696 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X115.533 Y103.033 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.385 Y103.008 E0.00695 ; perimeter
G1 X115.263 Y102.927 E0.00678 ; perimeter
G1 X115.212 Y102.852 E0.00421 ; perimeter
G1 X115.117 Y102.689 E0.00877 ; perimeter
G1 X114.953 Y102.298 E0.01963 ; perimeter
G1 X114.910 Y102.180 E0.00579 ; perimeter
G1 X114.869 Y101.959 E0.01043 ; perimeter
G1 X114.854 Y101.767 E0.00895 ; perimeter
G1 X114.870 Y101.683 E0.00393 ; perimeter
G1 X114.947 Y101.535 E0.00775 ; perimeter
G1 X115.009 Y101.470 E0.00411 ; perimeter
G1 X115.135 Y101.437 E0.00603 ; perimeter
G1 X115.316 Y101.348 E0.00934 ; perimeter
G1 X115.499 Y101.347 E0.00850 ; perimeter
G1 X115.610 Y101.426 E0.00629 ; perimeter
G1 X115.754 Y101.692 E0.01402 ; perimeter
G1 X115.831 Y101.933 E0.01171 ; perimeter
G1 X115.891 Y102.450 E0.02411 ; perimeter
G1 X115.869 Y102.674 E0.01043 ; perimeter
G1 X115.813 Y102.862 E0.00911 ; perimeter
G1 X115.720 Y102.964 E0.00640 ; perimeter
G1 X115.590 Y103.012 E0.00642 ; perimeter
G1 X115.449 Y102.909 F10800.000 ; move inwards before travel
G1 X115.554 Y102.769 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.443448
G1 F2400.000
G1 X115.327 Y101.874 E0.03073 ; infill
G1 X115.285 Y101.834 E0.00193 ; infill
;WIDTH:0.409538
G1 X115.260 Y101.818 E0.00090 ; infill
;WIDTH:0.362013
G1 X115.191 Y101.769 E0.00224 ; infill
;WIDTH:0.335661
G1 X115.123 Y101.721 E0.00205 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.191 Y101.769 E-0.02227 ; wipe and retract
;WIPE_END
G1 E-2.37773 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X114.580 Y97.565 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.681 Y97.329 E0.00866 ; perimeter
G1 X114.687 Y97.523 E0.00657 ; perimeter
G1 X114.634 Y97.537 E0.00187 ; perimeter
G1 X114.986 Y98.029 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.763 Y98.012 E0.01033 ; perimeter
G1 X114.675 Y98.058 E0.00459 ; perimeter
G1 X114.526 Y98.053 E0.00691 ; perimeter
G1 X114.379 Y98.124 E0.00753 ; perimeter
G1 X114.128 Y98.089 E0.01174 ; perimeter
G1 X114.064 Y98.032 E0.00399 ; perimeter
G1 X114.029 Y97.756 E0.01287 ; perimeter
G1 X114.091 Y97.489 E0.01273 ; perimeter
G1 X114.211 Y97.192 E0.01481 ; perimeter
G1 X114.469 Y96.676 E0.02674 ; perimeter
G1 X114.614 Y96.475 E0.01148 ; perimeter
G1 X114.766 Y96.483 E0.00703 ; perimeter
G1 X115.014 Y96.787 E0.01817 ; perimeter
G1 X115.149 Y97.187 E0.01958 ; perimeter
G1 X115.171 Y97.541 E0.01641 ; perimeter
G1 X115.126 Y97.881 E0.01590 ; perimeter
G1 X115.035 Y97.995 E0.00677 ; perimeter
G1 X114.814 Y97.886 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.763 Y98.012 E-0.07189 ; wipe and retract
G1 X114.675 Y98.058 E-0.02615 ; wipe and retract
G1 X114.526 Y98.053 E-0.03937 ; wipe and retract
G1 X114.379 Y98.124 E-0.04288 ; wipe and retract
G1 X114.128 Y98.089 E-0.06688 ; wipe and retract
G1 X114.064 Y98.032 E-0.02274 ; wipe and retract
G1 X114.029 Y97.756 E-0.07331 ; wipe and retract
G1 X114.091 Y97.489 E-0.07255 ; wipe and retract
G1 X114.211 Y97.192 E-0.08436 ; wipe and retract
G1 X114.469 Y96.676 E-0.15235 ; wipe and retract
G1 X114.614 Y96.475 E-0.06538 ; wipe and retract
G1 X114.766 Y96.483 E-0.04007 ; wipe and retract
G1 X115.014 Y96.787 E-0.10350 ; wipe and retract
G1 X115.149 Y97.187 E-0.11154 ; wipe and retract
G1 X115.171 Y97.541 E-0.09348 ; wipe and retract
G1 X115.126 Y97.881 E-0.09059 ; wipe and retract
G1 X115.035 Y97.995 E-0.03856 ; wipe and retract
;WIPE_END
G1 E-1.20439 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X110.773 Y96.684 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.868 Y96.589 E0.00622 ; perimeter
G1 X111.079 Y96.552 E0.00990 ; perimeter
G1 X111.175 Y96.556 E0.00449 ; perimeter
G1 X111.247 Y96.600 E0.00386 ; perimeter
G1 X111.256 Y96.650 E0.00236 ; perimeter
G1 X111.421 Y96.822 E0.01104 ; perimeter
G1 X111.455 Y96.944 E0.00588 ; perimeter
G1 X111.517 Y97.066 E0.00634 ; perimeter
G1 X111.568 Y97.255 E0.00908 ; perimeter
G1 X111.578 Y97.554 E0.01383 ; perimeter
G1 X111.528 Y97.756 E0.00967 ; perimeter
G1 X111.464 Y97.810 E0.00389 ; perimeter
G1 X111.332 Y97.842 E0.00628 ; perimeter
G1 X111.249 Y97.820 E0.00396 ; perimeter
G1 X110.957 Y97.619 E0.01642 ; perimeter
G1 X110.754 Y97.269 E0.01871 ; perimeter
G1 X110.710 Y97.021 E0.01170 ; perimeter
G1 X110.714 Y96.842 E0.00826 ; perimeter
G1 X110.753 Y96.740 E0.00506 ; perimeter
G1 X110.907 Y96.692 F10800.000 ; move inwards before travel
G1 X110.986 Y96.813 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.250091
G1 F2400.000
G1 X111.087 Y97.012 E0.00385 ; infill
G1 X111.213 Y97.351 E0.00624 ; infill
G1 X111.329 Y97.556 E0.00406 ; infill
G1 X111.157 Y97.455 F10800.000 ; move to first infill point
;WIDTH:0.221625
G1 F2400.000
G1 X111.023 Y96.806 E0.00985 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.157 Y97.455 E-0.17486 ; wipe and retract
;WIPE_END
G1 E-2.22514 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X108.534 Y98.382 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.232 Y98.487 E0.01482 ; perimeter
G1 X108.057 Y98.473 E0.00813 ; perimeter
G1 X107.918 Y98.297 E0.01042 ; perimeter
G1 X107.884 Y97.986 E0.01449 ; perimeter
G1 X107.921 Y97.891 E0.00472 ; perimeter
G1 X107.931 Y97.697 E0.00898 ; perimeter
G1 X107.981 Y97.551 E0.00718 ; perimeter
G1 X108.109 Y97.391 E0.00947 ; perimeter
G1 X108.267 Y97.328 E0.00787 ; perimeter
G1 X108.410 Y97.349 E0.00669 ; perimeter
G1 X108.558 Y97.437 E0.00798 ; perimeter
G1 X108.645 Y97.579 E0.00773 ; perimeter
G1 X108.710 Y97.820 E0.01155 ; perimeter
G1 X108.716 Y98.035 E0.00996 ; perimeter
G1 X108.639 Y98.273 E0.01161 ; perimeter
G1 X108.576 Y98.339 E0.00421 ; perimeter
G1 X108.248 Y98.239 F10800.000 ; move inwards before travel
G1 X108.405 Y98.169 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.320806
G1 F2400.000
G1 X108.292 Y98.053 E0.00373 ; infill
G1 X108.316 Y97.949 E0.00247 ; infill
G1 X108.307 Y97.730 E0.00508 ; infill
;WIDTH:0.292772
G1 X108.311 Y97.711 E0.00039 ; infill
;WIDTH:0.275681
G1 X108.312 Y97.698 E0.00026 ; infill
;WIDTH:0.260714
G1 X108.308 Y97.676 E0.00040 ; infill
;WIDTH:0.227314
G1 X108.304 Y97.654 E0.00034 ; infill
;WIDTH:0.193913
G1 X108.310 Y97.578 E0.00096 ; infill
G1 X108.386 Y97.615 F10800.000 ; move to first infill point
;WIDTH:0.1677
G1 F2400.000
G1 X108.190 Y98.242 E0.00681 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.386 Y97.615 E-0.17333 ; wipe and retract
;WIPE_END
G1 E-2.22667 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 X99.858 Y104.757 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.918 Y104.916 E0.00789 ; perimeter
G1 X99.892 Y105.017 E0.00478 ; perimeter
G1 X99.809 Y105.171 E0.00812 ; perimeter
G1 X99.669 Y105.314 E0.00926 ; perimeter
G1 X99.483 Y105.392 E0.00935 ; perimeter
G1 X99.423 Y105.440 E0.00356 ; perimeter
G1 X99.122 Y105.548 E0.01481 ; perimeter
G1 X98.899 Y105.855 E0.01759 ; perimeter
G1 X98.762 Y106.102 E0.01306 ; perimeter
G1 X98.731 Y106.194 E0.00451 ; perimeter
G1 X98.511 Y106.432 E0.01499 ; perimeter
G1 X98.248 Y106.480 E0.01239 ; perimeter
G1 X97.943 Y106.400 E0.01461 ; perimeter
G1 X97.823 Y106.332 E0.00642 ; perimeter
G1 X97.741 Y106.173 E0.00825 ; perimeter
G1 X97.737 Y106.031 E0.00657 ; perimeter
G1 X97.770 Y105.932 E0.00483 ; perimeter
G1 X97.919 Y105.744 E0.01112 ; perimeter
G1 X98.080 Y105.643 E0.00880 ; perimeter
G1 X98.252 Y105.589 E0.00835 ; perimeter
G1 X98.376 Y105.590 E0.00573 ; perimeter
G1 X98.770 Y105.469 E0.01912 ; perimeter
G1 X99.039 Y105.059 E0.02270 ; perimeter
G1 X99.015 Y104.887 E0.00808 ; perimeter
G1 X99.102 Y104.620 E0.01300 ; perimeter
G1 X99.162 Y104.543 E0.00453 ; perimeter
G1 X99.459 Y104.327 E0.01697 ; perimeter
G1 X99.750 Y104.157 E0.01566 ; perimeter
G1 X99.972 Y103.966 E0.01355 ; perimeter
G1 X100.131 Y103.815 E0.01015 ; perimeter
G1 X100.226 Y103.656 E0.00858 ; perimeter
G1 X100.368 Y103.497 E0.00985 ; perimeter
G1 X100.688 Y103.292 E0.01760 ; perimeter
G1 X100.765 Y103.262 E0.00382 ; perimeter
G1 X100.884 Y103.263 E0.00553 ; perimeter
G1 X101.078 Y103.154 E0.01030 ; perimeter
G1 X101.154 Y103.152 E0.00351 ; perimeter
G1 X101.364 Y103.069 E0.01047 ; perimeter
G1 X101.960 Y102.401 E0.04149 ; perimeter
G1 X102.183 Y102.087 E0.01782 ; perimeter
G1 X102.651 Y101.541 E0.03332 ; perimeter
G1 X103.206 Y100.969 E0.03690 ; perimeter
G1 X103.660 Y100.605 E0.02695 ; perimeter
G1 X103.823 Y100.365 E0.01345 ; perimeter
G1 X104.054 Y100.139 E0.01497 ; perimeter
G1 X104.368 Y99.911 E0.01799 ; perimeter
G1 X104.705 Y99.761 E0.01708 ; perimeter
G1 X105.077 Y99.679 E0.01763 ; perimeter
G1 X105.288 Y99.587 E0.01069 ; perimeter
G1 X105.895 Y99.485 E0.02847 ; perimeter
G1 X106.292 Y99.522 E0.01849 ; perimeter
G1 X106.401 Y99.594 E0.00604 ; perimeter
G1 X106.361 Y99.683 E0.00450 ; perimeter
G1 X106.348 Y99.773 E0.00423 ; perimeter
G1 X106.261 Y99.879 E0.00632 ; perimeter
G1 X106.077 Y100.036 E0.01124 ; perimeter
G1 X105.793 Y100.215 E0.01554 ; perimeter
G1 X104.732 Y100.673 E0.05353 ; perimeter
G1 X104.578 Y100.817 E0.00977 ; perimeter
G1 X104.328 Y100.990 E0.01407 ; perimeter
G1 X103.936 Y101.392 E0.02601 ; perimeter
G1 X103.564 Y101.736 E0.02346 ; perimeter
G1 X102.606 Y102.595 E0.05962 ; perimeter
G1 X102.476 Y102.688 E0.00739 ; perimeter
G1 X102.097 Y103.058 E0.02455 ; perimeter
G1 X101.783 Y103.326 E0.01911 ; perimeter
G1 X101.670 Y103.496 E0.00948 ; perimeter
G1 X101.311 Y103.880 E0.02431 ; perimeter
G1 X101.164 Y103.989 E0.00849 ; perimeter
G1 X100.829 Y104.133 E0.01691 ; perimeter
G1 X100.760 Y104.132 E0.00316 ; perimeter
G1 X100.259 Y104.321 E0.02483 ; perimeter
G1 X100.045 Y104.468 E0.01202 ; perimeter
G1 X99.890 Y104.707 E0.01317 ; perimeter
G1 X99.709 Y104.841 F10800.000 ; move inwards before travel
G1 X99.726 Y104.466 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.181364
G1 F2400.000
G1 X99.495 Y104.727 E0.00401 ; infill
;WIDTH:0.295423
G1 X99.344 Y105.195 E0.01032 ; infill
G1 X100.349 Y103.919 F10800.000 ; move to first infill point
;WIDTH:0.324889
G1 F2400.000
G1 X100.669 Y103.758 E0.00838 ; infill
;WIDTH:0.347133
G1 X100.721 Y103.738 E0.00141 ; infill
;WIDTH:0.363938
G1 X100.749 Y103.730 E0.00078 ; infill
;WIDTH:0.383425
G1 X101.485 Y103.338 E0.02363 ; infill
G1 X101.488 Y103.334 F10800.000 ; move to first infill point
;WIDTH:0.243316
G1 F2400.000
G1 X101.176 Y103.505 E0.00593 ; infill
G1 X101.014 Y103.626 E0.00337 ; infill
;WIDTH:0.336749
G1 X100.438 Y103.780 E0.01457 ; infill
G1 X101.869 Y102.902 F10800.000 ; move to first infill point
;WIDTH:0.101777
G1 F2400.000
G1 X101.914 Y102.858 E0.00031 ; infill
;WIDTH:0.128933
G1 X102.184 Y102.576 E0.00279 ; infill
;WIDTH:0.158192
G1 X102.288 Y102.455 E0.00152 ; infill
;WIDTH:0.185203
G1 X102.345 Y102.398 E0.00096 ; infill
;WIDTH:0.212216
G1 X102.402 Y102.341 E0.00114 ; infill
;WIDTH:0.226625
G1 X102.446 Y102.292 E0.00099 ; infill
;WIDTH:0.271954
G1 X102.688 Y102.044 E0.00661 ; infill
;WIDTH:0.307681
G1 X103.478 Y101.268 E0.02437 ; infill
G1 X103.948 Y100.845 E0.01392 ; infill
;WIDTH:0.340209
G1 X104.065 Y100.702 E0.00458 ; infill
;WIDTH:0.34801
G1 X104.085 Y100.680 E0.00073 ; infill
;WIDTH:0.375136
G1 X104.137 Y100.627 E0.00206 ; infill
;WIDTH:0.392981
G1 X104.529 Y100.308 E0.01472 ; infill
;WIDTH:0.408712
G1 X104.838 Y100.166 E0.01034 ; infill
G1 X105.011 Y100.110 E0.00552 ; infill
;WIDTH:0.309171
G1 X105.400 Y99.962 E0.00922 ; infill
G1 X106.000 Y99.785 E0.01384 ; infill
;LAYER_CHANGE
;Z:5.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;5.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.400 Y99.962 E-0.16497 ; wipe and retract
G1 X105.011 Y100.110 E-0.10992 ; wipe and retract
;WIPE_END
G1 E-2.12511 F2400.000 ; retract
G1 Z5.075 F10800.000 ; lift Z
G1 Z5.200 ; move to next layer (25)
;AFTER_LAYER_CHANGE
;5.2
G1 Z5.275 ; lift Z
G1 X96.183 Y108.358 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.119 Y108.245 E0.00601 ; perimeter
G1 X96.080 Y107.991 E0.01191 ; perimeter
G1 X96.168 Y107.765 E0.01125 ; perimeter
G1 X96.293 Y107.652 E0.00780 ; perimeter
G1 X96.601 Y107.563 E0.01485 ; perimeter
G1 X96.835 Y107.551 E0.01082 ; perimeter
G1 X96.907 Y107.590 E0.00379 ; perimeter
G1 X97.121 Y107.642 E0.01021 ; perimeter
G1 X97.216 Y107.807 E0.00882 ; perimeter
G1 X97.130 Y108.063 E0.01248 ; perimeter
G1 X96.927 Y108.351 E0.01634 ; perimeter
G1 X96.762 Y108.498 E0.01023 ; perimeter
G1 X96.603 Y108.532 E0.00753 ; perimeter
G1 X96.287 Y108.456 E0.01504 ; perimeter
G1 X96.227 Y108.399 E0.00385 ; perimeter
G1 X96.223 Y108.234 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.119 Y108.245 E-0.04963 ; wipe and retract
G1 X96.080 Y107.991 E-0.06783 ; wipe and retract
G1 X96.168 Y107.765 E-0.06407 ; wipe and retract
G1 X96.293 Y107.652 E-0.04443 ; wipe and retract
G1 X96.601 Y107.563 E-0.08460 ; wipe and retract
G1 X96.835 Y107.551 E-0.06166 ; wipe and retract
G1 X96.907 Y107.590 E-0.02157 ; wipe and retract
G1 X97.121 Y107.642 E-0.05816 ; wipe and retract
G1 X97.216 Y107.807 E-0.05025 ; wipe and retract
G1 X97.130 Y108.063 E-0.07108 ; wipe and retract
G1 X96.927 Y108.351 E-0.09308 ; wipe and retract
G1 X96.762 Y108.498 E-0.05826 ; wipe and retract
G1 X96.603 Y108.532 E-0.04289 ; wipe and retract
G1 X96.287 Y108.456 E-0.08569 ; wipe and retract
G1 X96.227 Y108.399 E-0.02191 ; wipe and retract
;WIPE_END
G1 E-1.52490 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X94.883 Y111.899 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.960 Y111.974 E0.00497 ; perimeter
G1 X95.043 Y112.184 E0.01046 ; perimeter
G1 X95.002 Y112.487 E0.01415 ; perimeter
G1 X94.825 Y112.750 E0.01468 ; perimeter
G1 X94.491 Y112.997 E0.01922 ; perimeter
G1 X94.452 Y112.964 E0.00238 ; perimeter
G1 X94.242 Y112.661 E0.01709 ; perimeter
G1 X94.212 Y112.358 E0.01410 ; perimeter
G1 X94.270 Y112.129 E0.01095 ; perimeter
G1 X94.320 Y112.037 E0.00486 ; perimeter
G1 X94.419 Y111.938 E0.00647 ; perimeter
G1 X94.634 Y111.853 E0.01072 ; perimeter
G1 X94.695 Y111.848 E0.00284 ; perimeter
G1 X94.823 Y111.891 E0.00625 ; perimeter
G1 X94.878 Y112.007 F10800.000 ; move inwards before travel
G1 X94.504 Y113.687 ; move to first perimeter point
G1 F1800.000
G1 X94.775 Y113.765 E0.01305 ; perimeter
G1 X94.829 Y113.857 E0.00496 ; perimeter
G1 X94.920 Y113.939 E0.00569 ; perimeter
G1 X95.023 Y114.133 E0.01015 ; perimeter
G1 X95.081 Y114.418 E0.01349 ; perimeter
G1 X95.043 Y114.572 E0.00735 ; perimeter
G1 X94.952 Y114.767 E0.00995 ; perimeter
G1 X94.957 Y114.841 E0.00346 ; perimeter
G1 X94.881 Y114.928 E0.00538 ; perimeter
G1 X94.616 Y115.004 E0.01275 ; perimeter
G1 X94.560 Y114.998 E0.00260 ; perimeter
G1 X94.369 Y114.914 E0.00969 ; perimeter
G1 X94.275 Y114.806 E0.00663 ; perimeter
G1 X94.213 Y114.499 E0.01452 ; perimeter
G1 X94.235 Y114.182 E0.01473 ; perimeter
G1 X94.287 Y114.093 E0.00475 ; perimeter
G1 X94.333 Y113.860 E0.01101 ; perimeter
G1 X94.499 Y113.747 E0.00930 ; perimeter
G1 X94.685 Y113.903 F10800.000 ; move inwards before travel
G1 X94.608 Y113.973 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301353
G1 F2400.000
G1 X94.642 Y114.204 E0.00503 ; infill
;WIDTH:0.343364
G1 X94.645 Y114.255 E0.00126 ; infill
;WIDTH:0.356389
G1 X94.645 Y114.268 E0.00035 ; infill
;WIDTH:0.387842
G1 X94.638 Y114.312 E0.00127 ; infill
;WIDTH:0.40882
G1 X94.642 Y114.430 E0.00360 ; infill
G1 X94.564 Y114.737 E0.00962 ; infill
G1 X95.790 Y115.840 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.797 Y115.707 E0.00616 ; perimeter
G1 X95.882 Y115.485 E0.01100 ; perimeter
G1 X96.119 Y115.351 E0.01261 ; perimeter
G1 X96.447 Y115.328 E0.01522 ; perimeter
G1 X96.667 Y115.437 E0.01139 ; perimeter
G1 X96.983 Y115.518 E0.01511 ; perimeter
G1 X97.219 Y115.602 E0.01160 ; perimeter
G1 X97.351 Y115.732 E0.00855 ; perimeter
G1 X97.383 Y115.792 E0.00318 ; perimeter
G1 X97.363 Y115.845 E0.00259 ; perimeter
G1 X97.229 Y115.955 E0.00803 ; perimeter
G1 X97.019 Y116.066 E0.01104 ; perimeter
G1 X96.857 Y116.105 E0.00769 ; perimeter
G1 X96.779 Y116.162 E0.00451 ; perimeter
G1 X96.253 Y116.166 E0.02435 ; perimeter
G1 X96.009 Y116.084 E0.01190 ; perimeter
G1 X95.929 Y116.033 E0.00444 ; perimeter
G1 X95.825 Y115.889 E0.00823 ; perimeter
G1 X95.889 Y115.751 F10800.000 ; move inwards before travel
G1 X96.062 Y115.805 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33791
G1 F2400.000
G1 X96.210 Y115.742 E0.00396 ; infill
;WIDTH:0.352591
G1 X96.228 Y115.740 E0.00045 ; infill
;WIDTH:0.391242
G1 X96.319 Y115.752 E0.00266 ; infill
G1 X96.847 Y115.732 E0.01530 ; infill
G1 X96.977 Y115.771 F10800.000 ; move to first infill point
;WIDTH:0.248037
G1 F2400.000
G1 X96.661 Y115.805 E0.00542 ; infill
G1 X96.065 Y115.705 E0.01030 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.661 Y115.805 E-0.15936 ; wipe and retract
G1 X96.977 Y115.771 E-0.08387 ; wipe and retract
;WIPE_END
G1 E-2.15677 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X104.204 Y115.790 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.290 Y115.619 E0.00887 ; perimeter
G1 X104.669 Y115.447 E0.01929 ; perimeter
G1 X104.985 Y115.387 E0.01487 ; perimeter
G1 X105.207 Y115.380 E0.01030 ; perimeter
G1 X105.345 Y115.397 E0.00645 ; perimeter
G1 X105.692 Y115.486 E0.01659 ; perimeter
G1 X105.792 Y115.547 E0.00543 ; perimeter
G1 X105.900 Y115.674 E0.00770 ; perimeter
G1 X105.927 Y115.773 E0.00476 ; perimeter
G1 X105.896 Y115.887 E0.00547 ; perimeter
G1 X105.754 Y116.044 E0.00981 ; perimeter
G1 X105.654 Y116.097 E0.00523 ; perimeter
G1 X105.286 Y116.187 E0.01757 ; perimeter
G1 X104.846 Y116.176 E0.02039 ; perimeter
G1 X104.530 Y116.082 E0.01526 ; perimeter
G1 X104.475 Y116.057 E0.00283 ; perimeter
G1 X104.247 Y115.833 E0.01480 ; perimeter
G1 X104.373 Y115.700 F10800.000 ; move inwards before travel
G1 X103.463 Y115.782 ; move to first perimeter point
G1 F1800.000
G1 X102.999 Y115.998 E0.02372 ; perimeter
G1 X102.369 Y116.123 E0.02975 ; perimeter
G1 X101.473 Y116.165 E0.04152 ; perimeter
G1 X100.837 Y116.149 E0.02951 ; perimeter
G1 X100.394 Y116.098 E0.02063 ; perimeter
G1 X100.186 Y116.059 E0.00980 ; perimeter
G1 X100.052 Y116.004 E0.00671 ; perimeter
G1 X99.778 Y115.936 E0.01307 ; perimeter
G1 X99.713 Y115.889 E0.00373 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.588 Y115.798 E0.00647 ; perimeter (bridge)
G1 X99.667 Y115.726 E0.00448 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.931 Y115.593 E0.01371 ; perimeter
G1 X100.544 Y115.478 E0.02888 ; perimeter
G1 X101.388 Y115.430 E0.03918 ; perimeter
G1 X102.395 Y115.474 E0.04667 ; perimeter
G1 X102.925 Y115.563 E0.02491 ; perimeter
G1 X103.407 Y115.761 E0.02414 ; perimeter
G1 X103.071 Y115.860 F10800.000 ; move inwards before travel
G1 X102.692 Y115.790 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.133411
G1 F2400.000
G1 X102.329 Y115.798 E0.00273 ; infill
;WIDTH:0.252914
G1 X100.583 Y115.797 E0.03049 ; infill
;WIDTH:0.202627
G1 X100.439 Y115.802 E0.00191 ; infill
;WIDTH:0.159638
G1 X100.342 Y115.802 E0.00095 ; infill
;WIDTH:0.12828
G1 X100.244 Y115.802 E0.00069 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.342 Y115.802 E-0.02571 ; wipe and retract
;WIPE_END
G1 E-2.37429 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X104.578 Y115.820 ; move to first infill point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.359512
G1 F2400.000
G1 X105.029 Y115.784 E0.01191 ; infill
G1 X105.659 Y115.763 E0.01661 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.029 Y115.784 E-0.16651 ; wipe and retract
G1 X104.578 Y115.820 E-0.11934 ; wipe and retract
;WIPE_END
G1 E-2.11414 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X114.720 Y115.155 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.840 Y115.027 E0.00814 ; perimeter
G1 X114.906 Y114.997 E0.00336 ; perimeter
G1 X115.057 Y114.976 E0.00703 ; perimeter
G1 X115.273 Y115.023 E0.01026 ; perimeter
G1 X115.336 Y115.072 E0.00370 ; perimeter
G1 X115.435 Y115.222 E0.00835 ; perimeter
G1 X115.469 Y115.325 E0.00500 ; perimeter
G1 X115.457 Y115.426 E0.00472 ; perimeter
G1 X115.379 Y115.610 E0.00928 ; perimeter
G1 X115.313 Y115.696 E0.00501 ; perimeter
G1 X115.245 Y115.749 E0.00397 ; perimeter
G1 X115.139 Y115.777 E0.00508 ; perimeter
G1 X114.988 Y115.772 E0.00699 ; perimeter
G1 X114.847 Y115.726 E0.00690 ; perimeter
G1 X114.772 Y115.663 E0.00453 ; perimeter
G1 X114.721 Y115.588 E0.00423 ; perimeter
G1 X114.690 Y115.496 E0.00450 ; perimeter
G1 X114.674 Y115.327 E0.00785 ; perimeter
G1 X114.704 Y115.213 E0.00546 ; perimeter
G1 X114.895 Y115.157 F10800.000 ; move inwards before travel
G1 X115.059 Y115.397 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.331809
G1 F2400.000
G1 X115.067 Y115.362 E0.00085 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.059 Y115.397 E-0.00935 ; wipe and retract
;WIPE_END
G1 E-2.39065 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X115.523 Y109.697 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.645 Y109.735 E0.00595 ; perimeter
G1 X115.806 Y109.871 E0.00976 ; perimeter
G1 X115.868 Y110.000 E0.00661 ; perimeter
G1 X115.890 Y110.198 E0.00921 ; perimeter
G1 X115.867 Y110.360 E0.00758 ; perimeter
G1 X115.783 Y110.516 E0.00822 ; perimeter
G1 X115.677 Y110.606 E0.00645 ; perimeter
G1 X115.589 Y110.640 E0.00435 ; perimeter
G1 X115.443 Y110.643 E0.00676 ; perimeter
G1 X115.267 Y110.577 E0.00874 ; perimeter
G1 X115.154 Y110.412 E0.00926 ; perimeter
G1 X115.088 Y110.152 E0.01240 ; perimeter
G1 X115.147 Y109.955 E0.00954 ; perimeter
G1 X115.240 Y109.800 E0.00836 ; perimeter
G1 X115.422 Y109.705 E0.00952 ; perimeter
G1 X115.463 Y109.702 E0.00189 ; perimeter
G1 X115.577 Y109.813 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.645 Y109.735 E-0.04895 ; wipe and retract
G1 X115.806 Y109.871 E-0.05561 ; wipe and retract
G1 X115.868 Y110.000 E-0.03768 ; wipe and retract
G1 X115.890 Y110.198 E-0.05248 ; wipe and retract
G1 X115.867 Y110.360 E-0.04317 ; wipe and retract
G1 X115.783 Y110.516 E-0.04685 ; wipe and retract
G1 X115.677 Y110.606 E-0.03672 ; wipe and retract
G1 X115.589 Y110.640 E-0.02476 ; wipe and retract
G1 X115.443 Y110.643 E-0.03853 ; wipe and retract
G1 X115.267 Y110.577 E-0.04982 ; wipe and retract
G1 X115.154 Y110.412 E-0.05276 ; wipe and retract
G1 X115.088 Y110.152 E-0.07065 ; wipe and retract
G1 X115.147 Y109.955 E-0.05437 ; wipe and retract
G1 X115.240 Y109.800 E-0.04763 ; wipe and retract
G1 X115.422 Y109.705 E-0.05425 ; wipe and retract
G1 X115.463 Y109.702 E-0.01077 ; wipe and retract
;WIPE_END
G1 E-1.67500 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X115.522 Y103.125 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.411 Y103.111 E0.00516 ; perimeter
G1 X115.271 Y103.024 E0.00763 ; perimeter
G1 X115.155 Y102.835 E0.01027 ; perimeter
G1 X115.121 Y102.724 E0.00536 ; perimeter
G1 X114.875 Y102.193 E0.02710 ; perimeter
G1 X114.776 Y101.907 E0.01405 ; perimeter
G1 X114.755 Y101.569 E0.01567 ; perimeter
G1 X114.802 Y101.476 E0.00484 ; perimeter
G1 X114.923 Y101.369 E0.00749 ; perimeter
G1 X115.106 Y101.336 E0.00861 ; perimeter
G1 X115.427 Y101.512 E0.01694 ; perimeter
G1 X115.500 Y101.511 E0.00335 ; perimeter
G1 X115.668 Y101.713 E0.01222 ; perimeter
G1 X115.807 Y102.092 E0.01867 ; perimeter
G1 X115.884 Y102.606 E0.02408 ; perimeter
G1 X115.806 Y102.956 E0.01661 ; perimeter
G1 X115.697 Y103.071 E0.00737 ; perimeter
G1 X115.579 Y103.108 E0.00572 ; perimeter
G1 X115.457 Y103.034 F10800.000 ; move inwards before travel
G1 X115.501 Y102.880 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.340063
G1 F2400.000
G1 X115.488 Y102.592 E0.00712 ; infill
G1 X115.409 Y102.327 E0.00683 ; infill
;WIDTH:0.454385
G1 X115.264 Y101.938 E0.01420 ; infill
G1 X115.283 Y101.911 E0.00110 ; infill
;WIDTH:0.410889
G1 X115.300 Y101.886 E0.00094 ; infill
;WIDTH:0.360948
G1 X115.318 Y101.861 E0.00081 ; infill
;WIDTH:0.311007
G1 X115.335 Y101.835 E0.00069 ; infill
;WIDTH:0.261065
G1 X115.352 Y101.810 E0.00056 ; infill
;WIDTH:0.211124
G1 X115.370 Y101.785 E0.00043 ; infill
;WIDTH:0.161183
G1 X115.387 Y101.759 E0.00030 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.370 Y101.785 E-0.00812 ; wipe and retract
;WIPE_END
G1 E-2.39188 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X114.640 Y96.767 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.709 Y96.767 E0.00320 ; perimeter
G1 X114.834 Y96.823 E0.00635 ; perimeter
G1 X114.946 Y96.975 E0.00874 ; perimeter
G1 X114.995 Y97.091 E0.00583 ; perimeter
G1 X115.022 Y97.228 E0.00645 ; perimeter
G1 X115.026 Y97.502 E0.01272 ; perimeter
G1 X114.960 Y97.811 E0.01464 ; perimeter
G1 X114.829 Y97.948 E0.00879 ; perimeter
G1 X114.472 Y98.159 E0.01919 ; perimeter
G1 X114.210 Y98.286 E0.01348 ; perimeter
G1 X113.949 Y98.311 E0.01215 ; perimeter
G1 X113.830 Y98.200 E0.00755 ; perimeter
G1 X113.827 Y98.137 E0.00292 ; perimeter
G1 X113.941 Y97.671 E0.02222 ; perimeter
G1 X113.999 Y97.601 E0.00421 ; perimeter
G1 X114.093 Y97.401 E0.01024 ; perimeter
G1 X114.219 Y97.258 E0.00883 ; perimeter
G1 X114.287 Y97.131 E0.00668 ; perimeter
G1 X114.595 Y96.807 E0.02070 ; perimeter
G1 X114.690 Y96.815 F10800.000 ; move inwards before travel
G1 X114.736 Y97.097 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.424545
G1 F2400.000
G1 X114.392 Y97.914 E0.02813 ; infill
G1 X114.162 Y98.041 F10800.000 ; move to first infill point
;WIDTH:0.29023
G1 F2400.000
G1 X114.275 Y97.840 E0.00474 ; infill
;WIDTH:0.301527
G1 X114.303 Y97.815 E0.00082 ; infill
;WIDTH:0.319529
G1 X114.783 Y97.364 E0.01515 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.303 Y97.815 E-0.17385 ; wipe and retract
;WIPE_END
G1 E-2.22615 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X110.832 Y96.884 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.881 Y96.813 E0.00400 ; perimeter
G1 X110.946 Y96.767 E0.00367 ; perimeter
G1 X111.147 Y96.747 E0.00935 ; perimeter
G1 X111.279 Y96.811 E0.00680 ; perimeter
G1 X111.474 Y97.015 E0.01307 ; perimeter
G1 X111.537 Y97.145 E0.00670 ; perimeter
G1 X111.622 Y97.411 E0.01295 ; perimeter
G1 X111.708 Y97.496 E0.00556 ; perimeter
G1 X111.803 Y98.002 E0.02389 ; perimeter
G1 X111.590 Y98.062 E0.01027 ; perimeter
G1 X111.245 Y98.000 E0.01623 ; perimeter
G1 X111.201 Y97.982 E0.00221 ; perimeter
G1 X111.047 Y97.846 E0.00952 ; perimeter
G1 X110.825 Y97.445 E0.02122 ; perimeter
G1 X110.789 Y97.129 E0.01476 ; perimeter
G1 X110.811 Y96.940 E0.00880 ; perimeter
G1 X110.918 Y96.874 F10800.000 ; move inwards before travel
G1 X111.517 Y97.738 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.267964
G1 F2400.000
G1 X111.375 Y97.664 E0.00300 ; infill
G1 X111.303 Y97.576 E0.00213 ; infill
G1 X111.195 Y97.327 E0.00508 ; infill
G1 X111.101 Y96.994 E0.00648 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.195 Y97.327 E-0.09134 ; wipe and retract
G1 X111.303 Y97.576 E-0.07167 ; wipe and retract
G1 X111.375 Y97.664 E-0.03009 ; wipe and retract
G1 X111.517 Y97.738 E-0.04226 ; wipe and retract
;WIPE_END
G1 E-2.16464 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X99.870 Y104.547 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.790 Y104.670 E0.00680 ; perimeter
G1 X99.906 Y104.979 E0.01530 ; perimeter
G1 X99.893 Y105.082 E0.00480 ; perimeter
G1 X99.829 Y105.243 E0.00801 ; perimeter
G1 X99.687 Y105.403 E0.00992 ; perimeter
G1 X99.583 Y105.447 E0.00525 ; perimeter
G1 X99.396 Y105.595 E0.01105 ; perimeter
G1 X99.208 Y105.663 E0.00925 ; perimeter
G1 X98.972 Y106.045 E0.02079 ; perimeter
G1 X98.585 Y106.486 E0.02721 ; perimeter
G1 X98.414 Y106.549 E0.00844 ; perimeter
G1 X98.123 Y106.489 E0.01373 ; perimeter
G1 X97.952 Y106.373 E0.00959 ; perimeter
G1 X97.840 Y106.180 E0.01034 ; perimeter
G1 X97.843 Y105.992 E0.00869 ; perimeter
G1 X97.883 Y105.904 E0.00450 ; perimeter
G1 X98.061 Y105.689 E0.01294 ; perimeter
G1 X98.229 Y105.591 E0.00898 ; perimeter
G1 X98.422 Y105.537 E0.00928 ; perimeter
G1 X98.817 Y105.359 E0.02009 ; perimeter
G1 X99.023 Y104.999 E0.01917 ; perimeter
G1 X99.132 Y104.687 E0.01534 ; perimeter
G1 X99.235 Y104.591 E0.00649 ; perimeter
G1 X99.338 Y104.524 E0.00573 ; perimeter
G1 X99.451 Y104.516 E0.00526 ; perimeter
G1 X99.715 Y104.412 E0.01314 ; perimeter
G1 X99.767 Y104.406 E0.00241 ; perimeter
G1 X99.834 Y104.498 E0.00530 ; perimeter
G1 X99.736 Y104.607 F10800.000 ; move inwards before travel
G1 X100.260 Y104.102 ; move to first perimeter point
G1 F1800.000
G1 X100.337 Y103.729 E0.01763 ; perimeter
G1 X100.539 Y103.437 E0.01644 ; perimeter
G1 X100.713 Y103.298 E0.01033 ; perimeter
G1 X101.280 Y102.980 E0.03011 ; perimeter
G1 X102.715 Y101.438 E0.09759 ; perimeter
G1 X103.162 Y100.999 E0.02898 ; perimeter
G1 X103.810 Y100.523 E0.03730 ; perimeter
G1 X104.328 Y100.100 E0.03094 ; perimeter
G1 X104.630 Y99.882 E0.01728 ; perimeter
G1 X104.932 Y99.720 E0.01585 ; perimeter
G1 X105.095 Y99.684 E0.00774 ; perimeter
G1 X105.630 Y99.452 E0.02700 ; perimeter
G1 X106.415 Y99.316 E0.03694 ; perimeter
G1 X106.599 Y99.328 E0.00852 ; perimeter
G1 X106.830 Y99.313 E0.01073 ; perimeter
G1 X106.935 Y99.393 E0.00612 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.966 Y99.417 E0.00162 ; perimeter (bridge)
G1 X106.933 Y99.448 E0.00189 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.878 Y99.549 E0.00532 ; perimeter
G1 X106.707 Y99.681 E0.01001 ; perimeter
G1 X106.491 Y99.887 E0.01383 ; perimeter
G1 X105.991 Y100.165 E0.02651 ; perimeter
G1 X104.576 Y100.699 E0.07007 ; perimeter
G1 X104.255 Y100.977 E0.01965 ; perimeter
G1 X104.168 Y101.124 E0.00793 ; perimeter
G1 X103.836 Y101.463 E0.02199 ; perimeter
G1 X103.771 Y101.552 E0.00510 ; perimeter
G1 X102.156 Y103.100 E0.10361 ; perimeter
G1 X101.415 Y103.889 E0.05013 ; perimeter
G1 X101.340 Y103.944 E0.00431 ; perimeter
G1 X101.245 Y103.979 E0.00470 ; perimeter
G1 X101.065 Y104.005 E0.00844 ; perimeter
G1 X100.916 Y104.074 E0.00760 ; perimeter
G1 X100.646 Y104.070 E0.01250 ; perimeter
G1 X100.432 Y104.133 E0.01033 ; perimeter
G1 X100.319 Y104.112 E0.00533 ; perimeter
G1 X100.485 Y103.795 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.337 Y103.729 E-0.10122 ; wipe and retract
G1 X100.539 Y103.437 E-0.09368 ; wipe and retract
G1 X100.713 Y103.298 E-0.05882 ; wipe and retract
G1 X101.280 Y102.980 E-0.17151 ; wipe and retract
G1 X102.715 Y101.438 E-0.55598 ; wipe and retract
G1 X103.162 Y100.999 E-0.16507 ; wipe and retract
G1 X103.810 Y100.523 E-0.21250 ; wipe and retract
G1 X104.328 Y100.100 E-0.17627 ; wipe and retract
G1 X104.630 Y99.882 E-0.09844 ; wipe and retract
G1 X104.932 Y99.720 E-0.09029 ; wipe and retract
G1 X105.095 Y99.684 E-0.04412 ; wipe and retract
G1 X105.630 Y99.452 E-0.15379 ; wipe and retract
G1 X106.415 Y99.316 E-0.21045 ; wipe and retract
G1 X106.599 Y99.328 E-0.04853 ; wipe and retract
G1 X106.830 Y99.313 E-0.06114 ; wipe and retract
G1 X106.935 Y99.393 E-0.03488 ; wipe and retract
;WIPE_END
G1 E-0.12331 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 X107.849 Y98.379 ; move to first perimeter point
G1 Z5.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.837 Y98.179 E0.00927 ; perimeter
G1 X107.942 Y97.908 E0.01348 ; perimeter
G1 X107.945 Y97.822 E0.00400 ; perimeter
G1 X108.040 Y97.627 E0.01006 ; perimeter
G1 X108.167 Y97.504 E0.00817 ; perimeter
G1 X108.257 Y97.470 E0.00446 ; perimeter
G1 X108.386 Y97.479 E0.00597 ; perimeter
G1 X108.607 Y97.618 E0.01211 ; perimeter
G1 X108.664 Y97.709 E0.00495 ; perimeter
G1 X108.773 Y98.074 E0.01765 ; perimeter
G1 X108.774 Y98.136 E0.00289 ; perimeter
G1 X108.682 Y98.440 E0.01471 ; perimeter
G1 X108.632 Y98.500 E0.00363 ; perimeter
G1 X108.226 Y98.715 E0.02130 ; perimeter
G1 X107.930 Y98.788 E0.01409 ; perimeter
G1 X107.712 Y98.898 E0.01130 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.627 Y98.941 E0.00399 ; perimeter (bridge)
G1 X107.649 Y98.866 E0.00327 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.700 Y98.694 E0.00829 ; perimeter
G1 X107.824 Y98.433 E0.01338 ; perimeter
G1 X108.031 Y98.295 F10800.000 ; move inwards before travel
G1 X106.449 Y99.592 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.209113
G1 F2400.000
G1 X105.983 Y99.757 E0.00684 ; infill
;WIDTH:0.337591
G1 X105.226 Y100.045 E0.01984 ; infill
;WIDTH:0.327638
G1 X105.055 Y100.097 E0.00423 ; infill
G1 X104.838 Y100.197 E0.00565 ; infill
;WIDTH:0.315217
G1 X104.684 Y100.280 E0.00397 ; infill
;WIDTH:0.269155
G1 X104.529 Y100.363 E0.00330 ; infill
;WIDTH:0.223093
G1 X104.425 Y100.422 E0.00179 ; infill
;WIDTH:0.184312
G1 X104.000 Y100.780 E0.00653 ; infill
G1 X103.885 Y100.907 F10800.000 ; move to first infill point
;WIDTH:0.305078
G1 F2400.000
G1 X103.545 Y101.202 E0.00984 ; infill
G1 X103.007 Y101.722 E0.01629 ; infill
G1 X101.901 Y102.843 E0.03433 ; infill
;WIDTH:0.284716
G1 X101.518 Y103.253 E0.01128 ; infill
G1 X101.371 Y103.372 E0.00380 ; infill
;WIDTH:0.379468
G1 X101.132 Y103.559 E0.00849 ; infill
G1 X99.560 Y104.742 F10800.000 ; move to first infill point
;WIDTH:0.19942
G1 F2400.000
G1 X99.192 Y105.412 E0.00995 ; infill
G1 X99.112 Y105.441 F10800.000 ; move to first infill point
;WIDTH:0.259217
G1 F2400.000
G1 X99.232 Y105.301 E0.00330 ; infill
;WIDTH:0.293998
G1 X99.352 Y105.162 E0.00383 ; infill
;WIDTH:0.30538
G1 X99.367 Y105.143 E0.00053 ; infill
;WIDTH:0.312992
G1 X99.375 Y105.132 E0.00031 ; infill
;WIDTH:0.340898
G1 X99.602 Y104.855 E0.00888 ; infill
G1 X98.926 Y105.660 F10800.000 ; move to first infill point
;WIDTH:0.364965
G1 F2400.000
G1 X98.132 Y106.203 E0.02575 ; infill
;LAYER_CHANGE
;Z:5.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;5.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.926 Y105.660 E-0.25373 ; wipe and retract
;WIPE_END
G1 E-2.14627 F2400.000 ; retract
G1 Z5.275 F10800.000 ; lift Z
G1 Z5.400 ; move to next layer (26)
;AFTER_LAYER_CHANGE
;5.4
G1 X98.846 Y105.291 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.095 Y104.930 E0.02030 ; perimeter
G1 X99.143 Y104.793 E0.00675 ; perimeter
G1 X99.361 Y104.608 E0.01322 ; perimeter
G1 X99.593 Y104.597 E0.01080 ; perimeter
G1 X99.707 Y104.648 E0.00578 ; perimeter
G1 X99.796 Y104.771 E0.00702 ; perimeter
G1 X99.919 Y105.048 E0.01403 ; perimeter
G1 X99.855 Y105.311 E0.01253 ; perimeter
G1 X99.706 Y105.491 E0.01086 ; perimeter
G1 X99.299 Y105.799 E0.02365 ; perimeter
G1 X98.886 Y106.255 E0.02847 ; perimeter
G1 X98.640 Y106.562 E0.01823 ; perimeter
G1 X98.436 Y106.650 E0.01030 ; perimeter
G1 X98.212 Y106.653 E0.01036 ; perimeter
G1 X98.065 Y106.535 E0.00873 ; perimeter
G1 X98.039 Y106.358 E0.00827 ; perimeter
G1 X97.924 Y106.167 E0.01033 ; perimeter
G1 X97.937 Y106.012 E0.00719 ; perimeter
G1 X98.045 Y105.807 E0.01074 ; perimeter
G1 X98.137 Y105.696 E0.00668 ; perimeter
G1 X98.386 Y105.535 E0.01373 ; perimeter
G1 X98.486 Y105.507 E0.00480 ; perimeter
G1 X98.795 Y105.322 E0.01669 ; perimeter
G1 X99.235 Y105.386 F10800.000 ; move inwards before travel
G1 X99.096 Y105.527 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.239859
G1 F2400.000
G1 X98.931 Y105.664 E0.00350 ; infill
;WIDTH:0.336928
G1 X98.670 Y105.878 E0.00826 ; infill
G1 X98.224 Y106.197 E0.01341 ; infill
G1 X99.096 Y105.527 F10800.000 ; move to first infill point
;WIDTH:0.277486
G1 F2400.000
G1 X99.180 Y105.438 E0.00239 ; infill
;WIDTH:0.315113
G1 X99.265 Y105.349 E0.00278 ; infill
;WIDTH:0.352739
G1 X99.349 Y105.259 E0.00316 ; infill
;WIDTH:0.390365
G1 X99.433 Y105.170 E0.00355 ; infill
;WIDTH:0.400202
G1 X99.477 Y105.108 E0.00225 ; infill
G1 X99.560 Y104.856 E0.00790 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.477 Y105.108 E-0.07016 ; wipe and retract
G1 X99.433 Y105.170 E-0.02000 ; wipe and retract
;WIPE_END
G1 E-2.30984 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X96.691 Y108.036 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.647 Y108.091 E0.00238 ; perimeter
G1 X96.645 Y108.071 E0.00066 ; perimeter
G1 X96.812 Y108.600 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.658 Y108.650 E0.00750 ; perimeter
G1 X96.365 Y108.527 E0.01473 ; perimeter
G1 X96.239 Y108.417 E0.00776 ; perimeter
G1 X96.208 Y108.298 E0.00570 ; perimeter
G1 X96.159 Y108.218 E0.00433 ; perimeter
G1 X96.142 Y108.044 E0.00812 ; perimeter
G1 X96.237 Y107.785 E0.01280 ; perimeter
G1 X96.355 Y107.672 E0.00757 ; perimeter
G1 X96.551 Y107.561 E0.01044 ; perimeter
G1 X96.713 Y107.513 E0.00781 ; perimeter
G1 X97.013 Y107.457 E0.01416 ; perimeter
G1 X97.532 Y107.461 E0.02404 ; perimeter
G1 X97.563 Y107.552 E0.00444 ; perimeter
G1 X97.467 Y107.821 E0.01324 ; perimeter
G1 X96.999 Y108.422 E0.03527 ; perimeter
G1 X96.856 Y108.558 E0.00917 ; perimeter
G1 X96.674 Y108.516 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.658 Y108.650 E-0.05743 ; wipe and retract
G1 X96.365 Y108.527 E-0.08389 ; wipe and retract
G1 X96.239 Y108.417 E-0.04420 ; wipe and retract
G1 X96.208 Y108.298 E-0.03246 ; wipe and retract
G1 X96.159 Y108.218 E-0.02464 ; wipe and retract
G1 X96.142 Y108.044 E-0.04628 ; wipe and retract
G1 X96.237 Y107.785 E-0.07290 ; wipe and retract
G1 X96.355 Y107.672 E-0.04313 ; wipe and retract
G1 X96.551 Y107.561 E-0.05950 ; wipe and retract
G1 X96.713 Y107.513 E-0.04447 ; wipe and retract
G1 X97.013 Y107.457 E-0.08068 ; wipe and retract
G1 X97.532 Y107.461 E-0.13694 ; wipe and retract
G1 X97.563 Y107.552 E-0.02529 ; wipe and retract
G1 X97.467 Y107.821 E-0.07541 ; wipe and retract
G1 X96.999 Y108.422 E-0.20093 ; wipe and retract
G1 X96.856 Y108.558 E-0.05227 ; wipe and retract
;WIPE_END
G1 E-1.31957 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X94.925 Y111.795 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.020 Y111.891 E0.00625 ; perimeter
G1 X95.088 Y112.089 E0.00972 ; perimeter
G1 X95.059 Y112.346 E0.01196 ; perimeter
G1 X94.897 Y112.623 E0.01489 ; perimeter
G1 X94.825 Y112.651 E0.00354 ; perimeter
G1 X94.744 Y112.715 E0.00478 ; perimeter
G1 X94.594 Y112.752 E0.00714 ; perimeter
G1 X94.442 Y112.735 E0.00711 ; perimeter
G1 X94.385 Y112.670 E0.00401 ; perimeter
G1 X94.274 Y112.451 E0.01140 ; perimeter
G1 X94.275 Y112.173 E0.01286 ; perimeter
G1 X94.294 Y112.097 E0.00364 ; perimeter
G1 X94.366 Y111.947 E0.00770 ; perimeter
G1 X94.482 Y111.829 E0.00766 ; perimeter
G1 X94.656 Y111.755 E0.00874 ; perimeter
G1 X94.792 Y111.748 E0.00635 ; perimeter
G1 X94.868 Y111.775 E0.00374 ; perimeter
G1 X94.918 Y111.930 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.020 Y111.891 E-0.05035 ; wipe and retract
G1 X95.088 Y112.089 E-0.05535 ; wipe and retract
G1 X95.059 Y112.346 E-0.06816 ; wipe and retract
G1 X94.897 Y112.623 E-0.08481 ; wipe and retract
G1 X94.825 Y112.651 E-0.02019 ; wipe and retract
G1 X94.744 Y112.715 E-0.02724 ; wipe and retract
G1 X94.594 Y112.752 E-0.04067 ; wipe and retract
G1 X94.442 Y112.735 E-0.04048 ; wipe and retract
G1 X94.385 Y112.670 E-0.02282 ; wipe and retract
G1 X94.274 Y112.451 E-0.06494 ; wipe and retract
G1 X94.275 Y112.173 E-0.07324 ; wipe and retract
G1 X94.294 Y112.097 E-0.02075 ; wipe and retract
G1 X94.366 Y111.947 E-0.04385 ; wipe and retract
G1 X94.482 Y111.829 E-0.04364 ; wipe and retract
G1 X94.656 Y111.755 E-0.04979 ; wipe and retract
G1 X94.792 Y111.748 E-0.03617 ; wipe and retract
G1 X94.868 Y111.775 E-0.02131 ; wipe and retract
;WIPE_END
G1 E-1.63625 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X94.848 Y113.819 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X94.959 Y113.886 E0.00601 ; perimeter
G1 X95.077 Y114.090 E0.01091 ; perimeter
G1 X95.108 Y114.313 E0.01043 ; perimeter
G1 X95.035 Y114.613 E0.01429 ; perimeter
G1 X94.981 Y114.711 E0.00520 ; perimeter
G1 X94.852 Y114.836 E0.00833 ; perimeter
G1 X94.748 Y114.875 E0.00514 ; perimeter
G1 X94.596 Y114.891 E0.00709 ; perimeter
G1 X94.372 Y114.778 E0.01161 ; perimeter
G1 X94.295 Y114.649 E0.00696 ; perimeter
G1 X94.263 Y114.413 E0.01106 ; perimeter
G1 X94.301 Y114.140 E0.01276 ; perimeter
G1 X94.392 Y113.982 E0.00843 ; perimeter
G1 X94.566 Y113.835 E0.01056 ; perimeter
G1 X94.791 Y113.799 E0.01054 ; perimeter
G1 X94.883 Y113.944 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.959 Y113.886 E-0.04985 ; wipe and retract
G1 X95.077 Y114.090 E-0.06216 ; wipe and retract
G1 X95.108 Y114.313 E-0.05940 ; wipe and retract
G1 X95.035 Y114.613 E-0.08142 ; wipe and retract
G1 X94.981 Y114.711 E-0.02962 ; wipe and retract
G1 X94.852 Y114.836 E-0.04744 ; wipe and retract
G1 X94.748 Y114.875 E-0.02926 ; wipe and retract
G1 X94.596 Y114.891 E-0.04037 ; wipe and retract
G1 X94.372 Y114.778 E-0.06613 ; wipe and retract
G1 X94.295 Y114.649 E-0.03965 ; wipe and retract
G1 X94.263 Y114.413 E-0.06301 ; wipe and retract
G1 X94.301 Y114.140 E-0.07269 ; wipe and retract
G1 X94.392 Y113.982 E-0.04805 ; wipe and retract
G1 X94.566 Y113.835 E-0.06016 ; wipe and retract
G1 X94.791 Y113.799 E-0.06006 ; wipe and retract
;WIPE_END
G1 E-1.59072 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X95.920 Y115.464 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.944 Y115.401 E0.00312 ; perimeter
G1 X96.128 Y115.284 E0.01012 ; perimeter
G1 X96.563 Y115.313 E0.02022 ; perimeter
G1 X97.121 Y115.454 E0.02666 ; perimeter
G1 X97.671 Y115.628 E0.02670 ; perimeter
G1 X97.854 Y115.710 E0.00928 ; perimeter
G1 X97.884 Y115.788 E0.00386 ; perimeter
G1 X97.911 Y115.801 E0.00137 ; perimeter
G1 X97.795 Y115.852 E0.00586 ; perimeter
G1 X97.638 Y115.981 E0.00944 ; perimeter
G1 X97.486 Y116.046 E0.00765 ; perimeter
G1 X96.968 Y116.168 E0.02462 ; perimeter
G1 X96.410 Y116.170 E0.02586 ; perimeter
G1 X96.086 Y116.080 E0.01560 ; perimeter
G1 X96.000 Y116.024 E0.00474 ; perimeter
G1 X95.866 Y115.817 E0.01144 ; perimeter
G1 X95.840 Y115.634 E0.00856 ; perimeter
G1 X95.894 Y115.519 E0.00590 ; perimeter
G1 X95.985 Y115.449 F10800.000 ; move inwards before travel
G1 X97.306 Y115.839 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.353886
G1 F2400.000
G1 X96.376 Y115.728 E0.02423 ; infill
G1 X96.251 Y115.686 E0.00340 ; infill
G1 X96.094 Y115.697 E0.00407 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.251 Y115.686 E-0.04154 ; wipe and retract
G1 X96.376 Y115.728 E-0.03473 ; wipe and retract
G1 X97.306 Y115.839 E-0.24726 ; wipe and retract
;WIPE_END
G1 E-2.07647 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X102.667 Y115.698 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.775 Y115.816 E0.00743 ; perimeter
G1 X102.472 Y115.975 E0.01585 ; perimeter
G1 X102.289 Y116.034 E0.00890 ; perimeter
G1 X101.771 Y116.123 E0.02436 ; perimeter
G1 X100.947 Y116.165 E0.03821 ; perimeter
G1 X100.661 Y116.165 E0.01326 ; perimeter
G1 X99.781 Y116.097 E0.04090 ; perimeter
G1 X99.258 Y115.974 E0.02488 ; perimeter
G1 X99.064 Y115.843 E0.01085 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.963 Y115.774 E0.00511 ; perimeter (bridge)
G1 X99.048 Y115.730 E0.00401 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.305 Y115.596 E0.01346 ; perimeter
G1 X99.844 Y115.489 E0.02543 ; perimeter
G1 X100.562 Y115.432 E0.03336 ; perimeter
G1 X101.782 Y115.473 E0.05653 ; perimeter
G1 X102.317 Y115.563 E0.02512 ; perimeter
G1 X102.611 Y115.676 E0.01461 ; perimeter
G1 X102.649 Y115.857 F10800.000 ; move inwards before travel
G1 X102.116 Y115.796 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.134983
G1 F2400.000
G1 X101.735 Y115.798 E0.00292 ; infill
;WIDTH:0.250833
G1 X100.116 Y115.795 E0.02799 ; infill
;WIDTH:0.214622
G1 X99.886 Y115.795 E0.00328 ; infill
;WIDTH:0.178491
G1 X99.645 Y115.809 E0.00273 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.886 Y115.795 E-0.06396 ; wipe and retract
;WIPE_END
G1 E-2.33604 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X104.593 Y115.687 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.746 Y115.532 E0.01009 ; perimeter
G1 X104.909 Y115.449 E0.00846 ; perimeter
G1 X105.309 Y115.381 E0.01878 ; perimeter
G1 X105.460 Y115.385 E0.00700 ; perimeter
G1 X105.620 Y115.399 E0.00744 ; perimeter
G1 X105.916 Y115.486 E0.01431 ; perimeter
G1 X106.029 Y115.547 E0.00595 ; perimeter
G1 X106.113 Y115.641 E0.00584 ; perimeter
G1 X106.164 Y115.770 E0.00643 ; perimeter
G1 X106.125 Y115.893 E0.00599 ; perimeter
G1 X105.982 Y116.046 E0.00969 ; perimeter
G1 X105.871 Y116.102 E0.00576 ; perimeter
G1 X105.490 Y116.188 E0.01810 ; perimeter
G1 X105.078 Y116.174 E0.01910 ; perimeter
G1 X104.767 Y116.057 E0.01542 ; perimeter
G1 X104.615 Y115.924 E0.00931 ; perimeter
G1 X104.568 Y115.784 E0.00687 ; perimeter
G1 X104.578 Y115.745 E0.00185 ; perimeter
G1 X104.811 Y115.680 F10800.000 ; move inwards before travel
G1 X104.837 Y115.783 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.320762
G1 F2400.000
G1 X105.133 Y115.796 E0.00685 ; infill
;WIDTH:0.361261
G1 X105.893 Y115.756 E0.02014 ; infill
G1 X105.735 Y115.885 F10800.000 ; move to first infill point
;WIDTH:0.190531
G1 F2400.000
G1 X104.844 Y115.776 E0.01102 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.735 Y115.885 E-0.23690 ; wipe and retract
;WIPE_END
G1 E-2.16310 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X114.716 Y115.160 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.834 Y115.028 E0.00820 ; perimeter
G1 X114.907 Y114.994 E0.00369 ; perimeter
G1 X115.053 Y114.974 E0.00684 ; perimeter
G1 X115.276 Y115.020 E0.01055 ; perimeter
G1 X115.338 Y115.068 E0.00364 ; perimeter
G1 X115.443 Y115.229 E0.00890 ; perimeter
G1 X115.476 Y115.325 E0.00471 ; perimeter
G1 X115.465 Y115.404 E0.00368 ; perimeter
G1 X115.384 Y115.602 E0.00989 ; perimeter
G1 X115.315 Y115.693 E0.00531 ; perimeter
G1 X115.244 Y115.748 E0.00416 ; perimeter
G1 X115.142 Y115.775 E0.00490 ; perimeter
G1 X115.007 Y115.774 E0.00622 ; perimeter
G1 X114.851 Y115.724 E0.00758 ; perimeter
G1 X114.768 Y115.656 E0.00501 ; perimeter
G1 X114.725 Y115.592 E0.00356 ; perimeter
G1 X114.683 Y115.471 E0.00593 ; perimeter
G1 X114.674 Y115.321 E0.00694 ; perimeter
G1 X114.701 Y115.218 E0.00495 ; perimeter
G1 X114.893 Y115.160 F10800.000 ; move inwards before travel
G1 X115.059 Y115.391 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334105
G1 F2400.000
G1 X115.064 Y115.363 E0.00069 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.059 Y115.391 E-0.00750 ; wipe and retract
;WIPE_END
G1 E-2.39250 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X115.526 Y109.607 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.662 Y109.645 E0.00651 ; perimeter
G1 X115.813 Y109.779 E0.00938 ; perimeter
G1 X115.870 Y109.899 E0.00613 ; perimeter
G1 X115.892 Y110.101 E0.00943 ; perimeter
G1 X115.871 Y110.258 E0.00733 ; perimeter
G1 X115.786 Y110.418 E0.00839 ; perimeter
G1 X115.670 Y110.516 E0.00707 ; perimeter
G1 X115.593 Y110.544 E0.00377 ; perimeter
G1 X115.438 Y110.547 E0.00719 ; perimeter
G1 X115.270 Y110.481 E0.00832 ; perimeter
G1 X115.146 Y110.286 E0.01075 ; perimeter
G1 X115.103 Y110.120 E0.00793 ; perimeter
G1 X115.096 Y110.038 E0.00378 ; perimeter
G1 X115.153 Y109.842 E0.00946 ; perimeter
G1 X115.221 Y109.724 E0.00633 ; perimeter
G1 X115.308 Y109.654 E0.00517 ; perimeter
G1 X115.467 Y109.611 E0.00760 ; perimeter
G1 X115.590 Y109.733 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.662 Y109.645 E-0.05232 ; wipe and retract
G1 X115.813 Y109.779 E-0.05345 ; wipe and retract
G1 X115.870 Y109.899 E-0.03495 ; wipe and retract
G1 X115.892 Y110.101 E-0.05372 ; wipe and retract
G1 X115.871 Y110.258 E-0.04177 ; wipe and retract
G1 X115.786 Y110.418 E-0.04777 ; wipe and retract
G1 X115.670 Y110.516 E-0.04027 ; wipe and retract
G1 X115.593 Y110.544 E-0.02150 ; wipe and retract
G1 X115.438 Y110.547 E-0.04098 ; wipe and retract
G1 X115.270 Y110.481 E-0.04739 ; wipe and retract
G1 X115.146 Y110.286 E-0.06126 ; wipe and retract
G1 X115.103 Y110.120 E-0.04519 ; wipe and retract
G1 X115.096 Y110.038 E-0.02154 ; wipe and retract
G1 X115.153 Y109.842 E-0.05391 ; wipe and retract
G1 X115.221 Y109.724 E-0.03609 ; wipe and retract
G1 X115.308 Y109.654 E-0.02948 ; wipe and retract
G1 X115.467 Y109.611 E-0.04330 ; wipe and retract
;WIPE_END
G1 E-1.67511 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X115.507 Y103.217 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.429 Y103.210 E0.00361 ; perimeter
G1 X115.275 Y103.119 E0.00828 ; perimeter
G1 X115.152 Y102.882 E0.01240 ; perimeter
G1 X115.056 Y102.567 E0.01522 ; perimeter
G1 X114.795 Y102.065 E0.02622 ; perimeter
G1 X114.669 Y101.755 E0.01551 ; perimeter
G1 X114.647 Y101.445 E0.01437 ; perimeter
G1 X114.698 Y101.312 E0.00660 ; perimeter
G1 X114.782 Y101.240 E0.00515 ; perimeter
G1 X115.007 Y101.247 E0.01043 ; perimeter
G1 X115.140 Y101.288 E0.00642 ; perimeter
G1 X115.207 Y101.348 E0.00418 ; perimeter
G1 X115.374 Y101.440 E0.00880 ; perimeter
G1 X115.561 Y101.670 E0.01374 ; perimeter
G1 X115.783 Y102.244 E0.02851 ; perimeter
G1 X115.885 Y102.694 E0.02137 ; perimeter
G1 X115.828 Y103.005 E0.01465 ; perimeter
G1 X115.699 Y103.166 E0.00959 ; perimeter
G1 X115.565 Y103.202 E0.00642 ; perimeter
G1 X115.459 Y103.156 F10800.000 ; move inwards before travel
G1 X115.552 Y102.956 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333415
G1 F2400.000
G1 X115.495 Y102.680 E0.00680 ; infill
G1 X115.401 Y102.365 E0.00794 ; infill
G1 X115.186 Y101.888 E0.01265 ; infill
G1 X114.947 Y101.485 E0.01131 ; infill
G1 X114.904 Y101.483 F10800.000 ; move to first infill point
;WIDTH:0.21209
G1 F2400.000
G1 X114.977 Y101.579 E0.00169 ; infill
;WIDTH:0.25314
G1 X114.999 Y101.625 E0.00090 ; infill
;WIDTH:0.27593
G1 X115.514 Y102.216 E0.01518 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.999 Y101.625 E-0.20680 ; wipe and retract
;WIPE_END
G1 E-2.19320 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X110.963 Y96.978 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.064 Y96.924 E0.00531 ; perimeter
G1 X111.318 Y96.979 E0.01204 ; perimeter
G1 X111.518 Y97.160 E0.01248 ; perimeter
G1 X111.578 Y97.305 E0.00725 ; perimeter
G1 X111.772 Y97.529 E0.01374 ; perimeter
G1 X111.887 Y97.626 E0.00697 ; perimeter
G1 X111.912 Y97.707 E0.00395 ; perimeter
G1 X112.086 Y97.930 E0.01308 ; perimeter
G1 X112.393 Y98.112 E0.01653 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.624 Y98.249 E0.01123 ; perimeter (bridge)
G1 X112.637 Y98.306 E0.00243 ; perimeter (bridge)
G1 X112.461 Y98.339 E0.00746 ; perimeter (bridge)
G1 X112.217 Y98.294 E0.01039 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.909 Y98.289 E0.01423 ; perimeter
G1 X111.227 Y98.166 E0.03211 ; perimeter
G1 X111.058 Y98.022 E0.01029 ; perimeter
G1 X111.010 Y97.864 E0.00766 ; perimeter
G1 X110.902 Y97.670 E0.01028 ; perimeter
G1 X110.865 Y97.460 E0.00988 ; perimeter
G1 X110.859 Y97.230 E0.01068 ; perimeter
G1 X110.895 Y97.086 E0.00685 ; perimeter
G1 X110.931 Y97.029 E0.00315 ; perimeter
G1 X111.071 Y97.015 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.064 Y96.924 E-0.04472 ; wipe and retract
G1 X111.318 Y96.979 E-0.06857 ; wipe and retract
G1 X111.518 Y97.160 E-0.07111 ; wipe and retract
G1 X111.578 Y97.305 E-0.04129 ; wipe and retract
G1 X111.772 Y97.529 E-0.07827 ; wipe and retract
G1 X111.887 Y97.626 E-0.03970 ; wipe and retract
G1 X111.912 Y97.707 E-0.02252 ; wipe and retract
G1 X112.086 Y97.930 E-0.07451 ; wipe and retract
G1 X112.393 Y98.112 E-0.09415 ; wipe and retract
;WIPE_END
G1 E-1.86515 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X113.677 Y98.150 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.773 Y97.835 E0.01525 ; perimeter
G1 X114.232 Y97.282 E0.03329 ; perimeter
G1 X114.363 Y97.170 E0.00797 ; perimeter
G1 X114.457 Y97.124 E0.00485 ; perimeter
G1 X114.545 Y97.044 E0.00553 ; perimeter
G1 X114.724 Y97.063 E0.00834 ; perimeter
G1 X114.827 Y97.172 E0.00696 ; perimeter
G1 X114.881 Y97.482 E0.01455 ; perimeter
G1 X114.800 Y97.823 E0.01625 ; perimeter
G1 X114.636 Y98.089 E0.01445 ; perimeter
G1 X114.531 Y98.147 E0.00556 ; perimeter
G1 X114.314 Y98.366 E0.01431 ; perimeter
G1 X114.111 Y98.503 E0.01135 ; perimeter
G1 X113.885 Y98.570 E0.01092 ; perimeter
G1 X113.687 Y98.526 E0.00940 ; perimeter
G1 X113.337 Y98.348 E0.01818 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X113.277 Y98.331 E0.00261 ; perimeter (bridge)
G1 X113.335 Y98.318 E0.00249 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.418 Y98.299 E0.00394 ; perimeter
G1 X113.625 Y98.180 E0.01106 ; perimeter
G1 X114.006 Y98.165 F10800.000 ; move inwards before travel
G1 X113.894 Y98.267 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.348062
G1 F2400.000
G1 X114.276 Y97.845 E0.01444 ; infill
;WIDTH:0.358255
G1 X114.308 Y97.815 E0.00115 ; infill
;WIDTH:0.376261
G1 X114.626 Y97.393 E0.01465 ; infill
G1 X114.587 Y97.329 F10800.000 ; move to first infill point
;WIDTH:0.229618
G1 F2400.000
G1 X114.369 Y97.969 E0.01049 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.587 Y97.329 E-0.17836 ; wipe and retract
;WIPE_END
G1 E-2.22164 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X111.557 Y97.981 ; move to first infill point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.381786
G1 F2400.000
G1 X111.376 Y97.690 E0.00966 ; infill
;WIDTH:0.370558
G1 X111.270 Y97.539 E0.00501 ; infill
;WIDTH:0.332496
G1 X111.264 Y97.526 E0.00036 ; infill
;WIDTH:0.324421
G1 X111.248 Y97.484 E0.00105 ; infill
;WIDTH:0.30749
G1 X111.230 Y97.424 E0.00138 ; infill
;WIDTH:0.293915
G1 X111.182 Y97.197 E0.00485 ; infill
G1 X111.106 Y97.440 F10800.000 ; move to first infill point
;WIDTH:0.292233
G1 F2400.000
G1 X111.576 Y97.857 E0.01303 ; infill
G1 X111.801 Y98.025 E0.00582 ; infill
G1 X111.820 Y97.981 F10800.000 ; move to first infill point
;WIDTH:0.361191
G1 F2400.000
G1 X111.159 Y97.637 E0.01970 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.820 Y97.981 E-0.19642 ; wipe and retract
;WIPE_END
G1 E-2.20358 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X104.472 Y100.537 ; move to first perimeter point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.302 Y100.785 E0.01392 ; perimeter
G1 X104.237 Y100.840 E0.00394 ; perimeter
G1 X103.977 Y101.279 E0.02364 ; perimeter
G1 X103.750 Y101.570 E0.01710 ; perimeter
G1 X103.395 Y101.924 E0.02324 ; perimeter
G1 X102.752 Y102.512 E0.04034 ; perimeter
G1 X102.584 Y102.717 E0.01226 ; perimeter
G1 X102.126 Y103.204 E0.03097 ; perimeter
G1 X102.084 Y103.278 E0.00395 ; perimeter
G1 X101.727 Y103.687 E0.02514 ; perimeter
G1 X101.492 Y103.912 E0.01507 ; perimeter
G1 X101.285 Y103.988 E0.01025 ; perimeter
G1 X101.054 Y104.022 E0.01079 ; perimeter
G1 X100.818 Y104.015 E0.01095 ; perimeter
G1 X100.708 Y103.941 E0.00612 ; perimeter
G1 X100.568 Y103.891 E0.00690 ; perimeter
G1 X100.527 Y103.805 E0.00440 ; perimeter
G1 X100.590 Y103.548 E0.01227 ; perimeter
G1 X100.694 Y103.386 E0.00891 ; perimeter
G1 X100.828 Y103.250 E0.00883 ; perimeter
G1 X101.227 Y102.947 E0.02322 ; perimeter
G1 X101.385 Y102.857 E0.00843 ; perimeter
G1 X101.916 Y102.283 E0.03622 ; perimeter
G1 X102.197 Y102.010 E0.01813 ; perimeter
G1 X102.802 Y101.334 E0.04203 ; perimeter
G1 X103.123 Y101.025 E0.02063 ; perimeter
G1 X103.387 Y100.834 E0.01511 ; perimeter
G1 X103.532 Y100.793 E0.00695 ; perimeter
G1 X103.676 Y100.702 E0.00790 ; perimeter
G1 X103.953 Y100.630 E0.01329 ; perimeter
G1 X104.415 Y100.292 E0.02649 ; perimeter
G1 X104.841 Y99.894 E0.02703 ; perimeter
G1 X105.230 Y99.645 E0.02139 ; perimeter
G1 X105.405 Y99.556 E0.00912 ; perimeter
G1 X105.949 Y99.332 E0.02725 ; perimeter
G1 X106.225 Y99.287 E0.01291 ; perimeter
G1 X106.403 Y99.217 E0.00887 ; perimeter
G1 X106.531 Y99.199 E0.00601 ; perimeter
G1 X106.920 Y99.075 E0.01891 ; perimeter
G1 X107.182 Y99.044 E0.01220 ; perimeter
G1 X107.601 Y98.616 E0.02775 ; perimeter
G1 X107.702 Y98.404 E0.01088 ; perimeter
G1 X107.848 Y98.222 E0.01083 ; perimeter
G1 X108.005 Y97.822 E0.01987 ; perimeter
G1 X108.073 Y97.735 E0.00513 ; perimeter
G1 X108.221 Y97.622 E0.00861 ; perimeter
G1 X108.411 Y97.621 E0.00884 ; perimeter
G1 X108.592 Y97.716 E0.00946 ; perimeter
G1 X108.668 Y97.793 E0.00500 ; perimeter
G1 X108.829 Y98.304 E0.02483 ; perimeter
G1 X108.804 Y98.539 E0.01096 ; perimeter
G1 X108.743 Y98.611 E0.00437 ; perimeter
G1 X108.247 Y98.867 E0.02582 ; perimeter
G1 X108.065 Y98.940 E0.00910 ; perimeter
G1 X107.369 Y99.378 E0.03808 ; perimeter
G1 X107.001 Y99.669 E0.02175 ; perimeter
G1 X106.486 Y99.978 E0.02779 ; perimeter
G1 X105.895 Y100.214 E0.02949 ; perimeter
G1 X105.516 Y100.314 E0.01815 ; perimeter
G1 X105.070 Y100.382 E0.02090 ; perimeter
G1 X104.974 Y100.422 E0.00482 ; perimeter
G1 X104.531 Y100.524 E0.02110 ; perimeter
G1 X104.186 Y100.444 F10800.000 ; move inwards before travel
G1 X104.972 Y100.102 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.297246
G1 F2400.000
G1 X105.770 Y99.836 E0.01781 ; infill
G1 X106.059 Y99.718 E0.00659 ; infill
G1 X106.321 Y99.645 E0.00576 ; infill
G1 X107.005 Y99.309 E0.01612 ; infill
G1 X107.806 Y98.809 F10800.000 ; move to first infill point
;WIDTH:0.397975
G1 F2400.000
G1 X108.523 Y98.122 E0.02933 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.806 Y98.809 E-0.26217 ; wipe and retract
;WIPE_END
G1 E-2.13783 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 X103.850 Y100.906 ; move to first infill point
G1 Z5.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.379051
G1 F2400.000
G1 X102.795 Y101.936 E0.04122 ; infill
;WIDTH:0.353046
G1 X102.486 Y102.248 E0.01131 ; infill
;WIDTH:0.308782
G1 X101.619 Y103.192 E0.02834 ; infill
;WIDTH:0.40711
G1 X101.243 Y103.513 E0.01498 ; infill
G1 X100.836 Y103.736 E0.01407 ; infill
G1 X100.798 Y103.712 F10800.000 ; move to first infill point
;WIDTH:0.36667
G1 F2400.000
G1 X101.704 Y103.348 E0.02627 ; infill
;LAYER_CHANGE
;Z:5.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;5.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.798 Y103.712 E-0.25753 ; wipe and retract
;WIPE_END
G1 E-2.14247 F2400.000 ; retract
G1 Z5.475 F10800.000 ; lift Z
G1 Z5.600 ; move to next layer (27)
;AFTER_LAYER_CHANGE
;5.6
G1 Z5.675 ; lift Z
G1 X104.848 Y115.678 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.955 Y115.557 E0.00749 ; perimeter
G1 X105.148 Y115.450 E0.01020 ; perimeter
G1 X105.578 Y115.379 E0.02019 ; perimeter
G1 X105.709 Y115.404 E0.00616 ; perimeter
G1 X105.855 Y115.401 E0.00679 ; perimeter
G1 X106.159 Y115.487 E0.01465 ; perimeter
G1 X106.271 Y115.551 E0.00594 ; perimeter
G1 X106.349 Y115.634 E0.00527 ; perimeter
G1 X106.393 Y115.774 E0.00678 ; perimeter
G1 X106.345 Y115.910 E0.00668 ; perimeter
G1 X106.215 Y116.046 E0.00873 ; perimeter
G1 X106.089 Y116.106 E0.00648 ; perimeter
G1 X105.695 Y116.189 E0.01867 ; perimeter
G1 X105.320 Y116.173 E0.01737 ; perimeter
G1 X105.020 Y116.065 E0.01478 ; perimeter
G1 X104.864 Y115.930 E0.00953 ; perimeter
G1 X104.817 Y115.776 E0.00747 ; perimeter
G1 X104.830 Y115.735 E0.00199 ; perimeter
G1 X105.009 Y115.668 F10800.000 ; move inwards before travel
G1 X105.092 Y115.766 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.272965
G1 F2400.000
G1 X105.992 Y115.880 E0.01735 ; infill
G1 X106.121 Y115.744 F10800.000 ; move to first infill point
;WIDTH:0.338002
G1 F2400.000
G1 X105.692 Y115.793 E0.01058 ; infill
G1 X105.097 Y115.813 E0.01461 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.692 Y115.793 E-0.15713 ; wipe and retract
G1 X106.121 Y115.744 E-0.11381 ; wipe and retract
;WIPE_END
G1 E-2.12906 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X102.153 Y115.791 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.141 Y115.838 E0.00225 ; perimeter
G1 X101.887 Y115.967 E0.01320 ; perimeter
G1 X101.166 Y116.122 E0.03415 ; perimeter
G1 X100.188 Y116.164 E0.04535 ; perimeter
G1 X99.897 Y116.150 E0.01348 ; perimeter
G1 X99.199 Y116.100 E0.03241 ; perimeter
G1 X98.617 Y115.984 E0.02747 ; perimeter
G1 X97.884 Y116.058 E0.03413 ; perimeter
G1 X97.646 Y116.119 E0.01139 ; perimeter
G1 X97.286 Y116.175 E0.01686 ; perimeter
G1 X96.769 Y116.178 E0.02396 ; perimeter
G1 X96.548 Y116.153 E0.01029 ; perimeter
G1 X96.164 Y116.066 E0.01827 ; perimeter
G1 X95.997 Y115.950 E0.00939 ; perimeter
G1 X95.878 Y115.758 E0.01044 ; perimeter
G1 X95.858 Y115.553 E0.00957 ; perimeter
G1 X95.873 Y115.432 E0.00562 ; perimeter
G1 X96.016 Y115.285 E0.00951 ; perimeter
G1 X96.040 Y115.222 E0.00312 ; perimeter
G1 X96.084 Y115.189 E0.00257 ; perimeter
G1 X96.255 Y115.174 E0.00793 ; perimeter
G1 X96.437 Y115.193 E0.00847 ; perimeter
G1 X96.553 Y115.267 E0.00639 ; perimeter
G1 X97.220 Y115.430 E0.03179 ; perimeter
G1 X97.413 Y115.431 E0.00893 ; perimeter
G1 X97.768 Y115.482 E0.01659 ; perimeter
G1 X97.965 Y115.540 E0.00954 ; perimeter
G1 X98.174 Y115.632 E0.01056 ; perimeter
G1 X98.568 Y115.578 E0.01843 ; perimeter
G1 X98.760 Y115.588 E0.00890 ; perimeter
G1 X99.302 Y115.482 E0.02560 ; perimeter
G1 X100.002 Y115.433 E0.03248 ; perimeter
G1 X100.649 Y115.437 E0.02996 ; perimeter
G1 X101.193 Y115.477 E0.02528 ; perimeter
G1 X101.708 Y115.563 E0.02419 ; perimeter
G1 X102.041 Y115.681 E0.01638 ; perimeter
G1 X102.110 Y115.749 E0.00447 ; perimeter
G1 X102.116 Y115.823 F10800.000 ; move inwards before travel
G1 X101.465 Y115.789 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.132464
G1 F2400.000
G1 X101.124 Y115.798 E0.00254 ; infill
;WIDTH:0.240172
G1 X99.631 Y115.795 E0.02449 ; infill
;WIDTH:0.231214
G1 X99.344 Y115.795 E0.00450 ; infill
;WIDTH:0.190336
G1 X99.240 Y115.801 E0.00128 ; infill
;WIDTH:0.162602
G1 X99.141 Y115.801 E0.00098 ; infill
;WIDTH:0.129761
G1 X99.043 Y115.801 E0.00071 ; infill
G1 X97.894 Y115.790 F10800.000 ; move to first infill point
;WIDTH:0.256578
G1 F2400.000
G1 X97.162 Y115.801 E0.01302 ; infill
;WIDTH:0.353524
G1 X96.714 Y115.747 E0.01164 ; infill
G1 X96.345 Y115.656 E0.00982 ; infill
G1 X96.297 Y115.614 E0.00164 ; infill
G1 X96.274 Y115.417 E0.00513 ; infill
G1 X94.998 Y114.646 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.902 Y114.725 E0.00576 ; perimeter
G1 X94.722 Y114.788 E0.00882 ; perimeter
G1 X94.624 Y114.788 E0.00455 ; perimeter
G1 X94.418 Y114.692 E0.01053 ; perimeter
G1 X94.333 Y114.533 E0.00835 ; perimeter
G1 X94.312 Y114.327 E0.00962 ; perimeter
G1 X94.357 Y114.097 E0.01085 ; perimeter
G1 X94.434 Y113.941 E0.00805 ; perimeter
G1 X94.694 Y113.798 E0.01374 ; perimeter
G1 X94.843 Y113.784 E0.00692 ; perimeter
G1 X95.020 Y113.870 E0.00911 ; perimeter
G1 X95.137 Y114.059 E0.01029 ; perimeter
G1 X95.169 Y114.246 E0.00881 ; perimeter
G1 X95.101 Y114.499 E0.01213 ; perimeter
G1 X95.032 Y114.597 E0.00553 ; perimeter
G1 X94.876 Y114.621 F10800.000 ; move inwards before travel
G1 X94.641 Y112.686 ; move to first perimeter point
G1 F1800.000
G1 X94.517 Y112.633 E0.00626 ; perimeter
G1 X94.406 Y112.525 E0.00716 ; perimeter
G1 X94.322 Y112.329 E0.00988 ; perimeter
G1 X94.333 Y112.034 E0.01367 ; perimeter
G1 X94.410 Y111.861 E0.00878 ; perimeter
G1 X94.547 Y111.720 E0.00909 ; perimeter
G1 X94.710 Y111.649 E0.00825 ; perimeter
G1 X94.908 Y111.650 E0.00916 ; perimeter
G1 X95.002 Y111.680 E0.00458 ; perimeter
G1 X95.095 Y111.786 E0.00650 ; perimeter
G1 X95.163 Y112.034 E0.01192 ; perimeter
G1 X95.118 Y112.313 E0.01308 ; perimeter
G1 X94.966 Y112.558 E0.01338 ; perimeter
G1 X94.698 Y112.666 E0.01338 ; perimeter
G1 X94.579 Y112.566 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.517 Y112.633 E-0.04856 ; wipe and retract
G1 X94.406 Y112.525 E-0.04076 ; wipe and retract
G1 X94.322 Y112.329 E-0.05628 ; wipe and retract
G1 X94.333 Y112.034 E-0.07785 ; wipe and retract
G1 X94.410 Y111.861 E-0.05002 ; wipe and retract
G1 X94.547 Y111.720 E-0.05179 ; wipe and retract
G1 X94.710 Y111.649 E-0.04699 ; wipe and retract
G1 X94.908 Y111.650 E-0.05218 ; wipe and retract
G1 X95.002 Y111.680 E-0.02612 ; wipe and retract
G1 X95.095 Y111.786 E-0.03706 ; wipe and retract
G1 X95.163 Y112.034 E-0.06792 ; wipe and retract
G1 X95.118 Y112.313 E-0.07453 ; wipe and retract
G1 X94.966 Y112.558 E-0.07624 ; wipe and retract
G1 X94.698 Y112.666 E-0.07624 ; wipe and retract
;WIPE_END
G1 E-1.61746 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X96.690 Y108.159 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.705 Y108.117 E0.00153 ; perimeter
G1 X96.787 Y108.035 E0.00390 ; perimeter
G1 X96.727 Y108.112 E0.00329 ; perimeter
G1 X96.752 Y108.778 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.631 Y108.763 E0.00566 ; perimeter
G1 X96.423 Y108.645 E0.01105 ; perimeter
G1 X96.262 Y108.451 E0.01167 ; perimeter
G1 X96.205 Y108.246 E0.00990 ; perimeter
G1 X96.203 Y108.092 E0.00713 ; perimeter
G1 X96.286 Y107.853 E0.01171 ; perimeter
G1 X96.529 Y107.611 E0.01590 ; perimeter
G1 X96.780 Y107.477 E0.01314 ; perimeter
G1 X96.895 Y107.452 E0.00549 ; perimeter
G1 X97.223 Y107.320 E0.01636 ; perimeter
G1 X97.404 Y107.269 E0.00873 ; perimeter
G1 X97.591 Y107.259 E0.00866 ; perimeter
G1 X97.868 Y107.066 E0.01566 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X97.901 Y107.043 E0.00167 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.075 Y106.922 E0.00983 ; perimeter
G1 X98.019 Y106.590 E0.01557 ; perimeter
G1 X98.035 Y106.554 E0.00182 ; perimeter
G1 X98.005 Y106.228 E0.01516 ; perimeter
G1 X98.015 Y106.053 E0.00815 ; perimeter
G1 X98.218 Y105.704 E0.01867 ; perimeter
G1 X98.362 Y105.589 E0.00857 ; perimeter
G1 X98.881 Y105.250 E0.02869 ; perimeter
G1 X99.126 Y104.909 E0.01948 ; perimeter
G1 X99.376 Y104.706 E0.01489 ; perimeter
G1 X99.529 Y104.689 E0.00715 ; perimeter
G1 X99.668 Y104.735 E0.00677 ; perimeter
G1 X99.764 Y104.845 E0.00678 ; perimeter
G1 X99.832 Y104.880 E0.00349 ; perimeter
G1 X99.921 Y105.058 E0.00925 ; perimeter
G1 X99.937 Y105.140 E0.00388 ; perimeter
G1 X99.875 Y105.409 E0.01280 ; perimeter
G1 X99.720 Y105.600 E0.01137 ; perimeter
G1 X99.336 Y105.901 E0.02258 ; perimeter
G1 X98.919 Y106.337 E0.02797 ; perimeter
G1 X98.587 Y106.779 E0.02560 ; perimeter
G1 X98.432 Y106.888 E0.00879 ; perimeter
G1 X98.294 Y106.900 E0.00640 ; perimeter
G1 X98.056 Y107.155 E0.01616 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X97.980 Y107.237 E0.00469 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X97.935 Y107.286 E0.00306 ; perimeter
G1 X97.845 Y107.540 E0.01248 ; perimeter
G1 X97.690 Y107.768 E0.01277 ; perimeter
G1 X97.483 Y107.998 E0.01433 ; perimeter
G1 X97.287 Y108.178 E0.01233 ; perimeter
G1 X97.047 Y108.485 E0.01806 ; perimeter
G1 X97.006 Y108.585 E0.00498 ; perimeter
G1 X96.846 Y108.750 E0.01065 ; perimeter
G1 X96.809 Y108.761 E0.00178 ; perimeter
G1 X96.677 Y108.681 F10800.000 ; move inwards before travel
G1 X96.750 Y108.503 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.123972
G1 F2400.000
G1 X96.541 Y108.393 E0.00159 ; infill
G1 X96.976 Y107.881 F10800.000 ; move to first infill point
;WIDTH:0.358601
G1 F2400.000
G1 X97.578 Y107.501 E0.01868 ; infill
G1 X97.550 Y107.503 F10800.000 ; move to first infill point
;WIDTH:0.177105
G1 F2400.000
G1 X96.998 Y107.900 E0.00759 ; infill
G1 X98.299 Y106.657 F10800.000 ; move to first infill point
;WIDTH:0.473407
G1 F2400.000
G1 X98.464 Y106.188 E0.01782 ; infill
;WIDTH:0.487132
G1 X98.579 Y106.015 E0.00765 ; infill
G1 X98.776 Y105.847 E0.00958 ; infill
;WIDTH:0.356888
G1 X99.178 Y105.519 E0.01353 ; infill
;WIDTH:0.403363
G1 X99.292 Y105.400 E0.00496 ; infill
;WIDTH:0.451685
G1 X99.481 Y105.181 E0.00981 ; infill
G1 X100.806 Y103.868 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.739 Y103.745 E0.00649 ; perimeter
G1 X100.731 Y103.625 E0.00555 ; perimeter
G1 X100.835 Y103.355 E0.01339 ; perimeter
G1 X101.114 Y103.076 E0.01826 ; perimeter
G1 X101.810 Y102.465 E0.04291 ; perimeter
G1 X102.199 Y102.070 E0.02568 ; perimeter
G1 X102.696 Y101.507 E0.03476 ; perimeter
G1 X102.749 Y101.414 E0.00498 ; perimeter
G1 X103.137 Y101.012 E0.02587 ; perimeter
G1 X103.345 Y100.868 E0.01174 ; perimeter
G1 X103.585 Y100.795 E0.01161 ; perimeter
G1 X103.700 Y100.795 E0.00536 ; perimeter
G1 X103.975 Y100.729 E0.01309 ; perimeter
G1 X104.025 Y100.748 E0.00248 ; perimeter
G1 X104.149 Y100.718 E0.00590 ; perimeter
G1 X104.085 Y100.945 E0.01090 ; perimeter
G1 X104.022 Y101.052 E0.00576 ; perimeter
G1 X103.913 Y101.347 E0.01458 ; perimeter
G1 X103.726 Y101.590 E0.01419 ; perimeter
G1 X103.553 Y101.763 E0.01133 ; perimeter
G1 X102.759 Y102.458 E0.04889 ; perimeter
G1 X102.430 Y102.826 E0.02288 ; perimeter
G1 X102.332 Y102.967 E0.00796 ; perimeter
G1 X102.110 Y103.202 E0.01498 ; perimeter
G1 X101.923 Y103.539 E0.01783 ; perimeter
G1 X101.632 Y103.893 E0.02123 ; perimeter
G1 X101.397 Y104.004 E0.01204 ; perimeter
G1 X101.189 Y104.031 E0.00973 ; perimeter
G1 X101.012 Y103.956 E0.00888 ; perimeter
G1 X100.929 Y103.955 E0.00385 ; perimeter
G1 X100.855 Y103.903 E0.00419 ; perimeter
G1 X100.851 Y103.735 F10800.000 ; move inwards before travel
G1 X100.990 Y103.700 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.467598
G1 F2400.000
G1 X101.268 Y103.563 E0.01095 ; infill
;WIDTH:0.483493
G1 X101.337 Y103.514 E0.00310 ; infill
G1 X101.552 Y103.286 E0.01148 ; infill
;WIDTH:0.368272
G1 X101.790 Y102.990 E0.01028 ; infill
;WIDTH:0.2385
G1 X102.049 Y102.738 E0.00588 ; infill
G1 X102.525 Y102.213 E0.01152 ; infill
;WIDTH:0.28131
G1 X102.762 Y101.977 E0.00662 ; infill
;WIDTH:0.330845
G1 X103.018 Y101.720 E0.00869 ; infill
;WIDTH:0.358435
G1 X103.070 Y101.655 E0.00219 ; infill
;WIDTH:0.382214
G1 X103.714 Y101.036 E0.02520 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.070 Y101.655 E-0.23574 ; wipe and retract
;WIPE_END
G1 E-2.16426 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X108.214 Y98.489 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.365 Y98.294 E0.00835 ; perimeter
G1 X108.418 Y98.397 E0.00393 ; perimeter
G1 X108.270 Y98.467 E0.00553 ; perimeter
G1 X108.946 Y98.620 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.876 Y98.712 E0.00533 ; perimeter
G1 X108.483 Y98.901 E0.02021 ; perimeter
G1 X108.004 Y99.093 E0.02388 ; perimeter
G1 X107.556 Y99.420 E0.02570 ; perimeter
G1 X106.823 Y99.859 E0.03957 ; perimeter
G1 X106.275 Y100.073 E0.02728 ; perimeter
G1 X105.691 Y100.193 E0.02761 ; perimeter
G1 X105.427 Y100.217 E0.01227 ; perimeter
G1 X105.123 Y100.173 E0.01421 ; perimeter
G1 X104.949 Y100.217 E0.00833 ; perimeter
G1 X104.952 Y100.103 E0.00527 ; perimeter
G1 X105.186 Y99.884 E0.01482 ; perimeter
G1 X105.251 Y99.777 E0.00579 ; perimeter
G1 X105.357 Y99.678 E0.00673 ; perimeter
G1 X105.910 Y99.345 E0.02990 ; perimeter
G1 X107.172 Y98.874 E0.06238 ; perimeter
G1 X107.676 Y98.411 E0.03174 ; perimeter
G1 X108.120 Y97.833 E0.03375 ; perimeter
G1 X108.228 Y97.767 E0.00585 ; perimeter
G1 X108.405 Y97.751 E0.00824 ; perimeter
G1 X108.558 Y97.804 E0.00748 ; perimeter
G1 X108.755 Y97.998 E0.01282 ; perimeter
G1 X108.955 Y98.390 E0.02039 ; perimeter
G1 X108.968 Y98.463 E0.00345 ; perimeter
G1 X108.954 Y98.561 E0.00456 ; perimeter
G1 X108.831 Y98.629 F10800.000 ; move inwards before travel
G1 X108.028 Y98.643 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.326985
G1 F2400.000
G1 X107.839 Y98.762 E0.00528 ; infill
;WIDTH:0.29794
G1 X107.814 Y98.780 E0.00067 ; infill
;WIDTH:0.290465
G1 X107.591 Y98.962 E0.00591 ; infill
;WIDTH:0.25815
G1 X107.369 Y99.144 E0.00514 ; infill
;WIDTH:0.225838
G1 X106.982 Y99.341 E0.00661 ; infill
;WIDTH:0.342066
G1 X106.657 Y99.494 E0.00893 ; infill
G1 X105.923 Y99.768 E0.01950 ; infill
;WIDTH:0.31803
G1 X105.762 Y99.831 E0.00395 ; infill
;WIDTH:0.278181
G1 X105.602 Y99.894 E0.00338 ; infill
;WIDTH:0.238332
G1 X105.441 Y99.957 E0.00280 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.602 Y99.894 E-0.04555 ; wipe and retract
;WIPE_END
G1 E-2.35445 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X111.451 Y97.881 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.445 Y97.839 E0.00143 ; perimeter
G1 X111.471 Y97.869 E0.00133 ; perimeter
G1 X113.199 Y98.179 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.439 Y98.073 E0.01214 ; perimeter
G1 X113.565 Y98.064 E0.00586 ; perimeter
G1 X113.844 Y97.746 E0.01958 ; perimeter
G1 X113.927 Y97.690 E0.00468 ; perimeter
G1 X114.113 Y97.483 E0.01285 ; perimeter
G1 X114.438 Y97.313 E0.01699 ; perimeter
G1 X114.635 Y97.333 E0.00919 ; perimeter
G1 X114.686 Y97.390 E0.00353 ; perimeter
G1 X114.727 Y97.598 E0.00984 ; perimeter
G1 X114.626 Y97.986 E0.01856 ; perimeter
G1 X114.468 Y98.265 E0.01488 ; perimeter
G1 X114.251 Y98.493 E0.01455 ; perimeter
G1 X114.215 Y98.599 E0.00523 ; perimeter
G1 X114.039 Y98.720 E0.00986 ; perimeter
G1 X113.976 Y98.855 E0.00692 ; perimeter
G1 X113.824 Y98.923 E0.00773 ; perimeter
G1 X113.493 Y98.744 E0.01742 ; perimeter
G1 X112.867 Y98.638 E0.02939 ; perimeter
G1 X112.189 Y98.451 E0.03257 ; perimeter
G1 X111.566 Y98.388 E0.02903 ; perimeter
G1 X111.227 Y98.334 E0.01589 ; perimeter
G1 X111.018 Y98.164 E0.01247 ; perimeter
G1 X110.955 Y97.943 E0.01063 ; perimeter
G1 X110.967 Y97.905 E0.00186 ; perimeter
G1 X110.915 Y97.528 E0.01764 ; perimeter
G1 X110.930 Y97.349 E0.00830 ; perimeter
G1 X111.018 Y97.170 E0.00924 ; perimeter
G1 X111.128 Y97.102 E0.00598 ; perimeter
G1 X111.442 Y97.177 E0.01496 ; perimeter
G1 X111.680 Y97.375 E0.01434 ; perimeter
G1 X111.827 Y97.544 E0.01037 ; perimeter
G1 X112.002 Y97.691 E0.01060 ; perimeter
G1 X112.524 Y97.997 E0.02803 ; perimeter
G1 X112.703 Y98.073 E0.00901 ; perimeter
G1 X113.140 Y98.166 E0.02072 ; perimeter
G1 X113.371 Y98.377 F10800.000 ; move inwards before travel
G1 X113.305 Y98.396 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.253279
G1 F2400.000
G1 X113.590 Y98.409 E0.00498 ; infill
;WIDTH:0.267978
G1 X113.990 Y98.461 E0.00755 ; infill
G1 X113.755 Y98.434 F10800.000 ; move to first infill point
;WIDTH:0.330237
G1 F2400.000
G1 X113.870 Y98.338 E0.00358 ; infill
G1 X114.170 Y97.998 E0.01085 ; infill
G1 X114.488 Y97.560 E0.01291 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.170 Y97.998 E-0.14263 ; wipe and retract
G1 X113.870 Y98.338 E-0.11988 ; wipe and retract
G1 X113.755 Y98.434 E-0.03953 ; wipe and retract
;WIPE_END
G1 E-2.09796 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X112.414 Y98.239 ; move to first infill point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.137367
G1 F2400.000
G1 X111.956 Y98.060 E0.00386 ; infill
G1 X111.858 Y97.913 F10800.000 ; move to first infill point
;WIDTH:0.146413
G1 F2400.000
G1 X112.039 Y98.063 E0.00202 ; infill
;WIDTH:0.195905
G1 X112.219 Y98.212 E0.00298 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.039 Y98.063 E-0.06186 ; wipe and retract
;WIPE_END
G1 E-2.33814 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X114.539 Y101.244 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.593 Y101.106 E0.00688 ; perimeter
G1 X114.617 Y101.088 E0.00139 ; perimeter
G1 X114.839 Y101.061 E0.01037 ; perimeter
G1 X114.942 Y101.087 E0.00492 ; perimeter
G1 X115.120 Y101.187 E0.00946 ; perimeter
G1 X115.434 Y101.518 E0.02114 ; perimeter
G1 X115.548 Y101.891 E0.01806 ; perimeter
G1 X115.670 Y102.210 E0.01580 ; perimeter
G1 X115.804 Y102.442 E0.01241 ; perimeter
G1 X115.872 Y102.667 E0.01090 ; perimeter
G1 X115.883 Y102.766 E0.00461 ; perimeter
G1 X115.846 Y103.054 E0.01345 ; perimeter
G1 X115.724 Y103.238 E0.01025 ; perimeter
G1 X115.684 Y103.267 E0.00229 ; perimeter
G1 X115.513 Y103.308 E0.00816 ; perimeter
G1 X115.423 Y103.300 E0.00416 ; perimeter
G1 X115.294 Y103.227 E0.00687 ; perimeter
G1 X115.146 Y102.918 E0.01587 ; perimeter
G1 X115.078 Y102.697 E0.01071 ; perimeter
G1 X115.059 Y102.457 E0.01117 ; perimeter
G1 X114.712 Y101.929 E0.02927 ; perimeter
G1 X114.569 Y101.612 E0.01610 ; perimeter
G1 X114.532 Y101.460 E0.00725 ; perimeter
G1 X114.537 Y101.304 E0.00722 ; perimeter
G1 X114.681 Y101.200 F10800.000 ; move inwards before travel
G1 X114.811 Y101.307 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.28468
G1 F2400.000
G1 X114.912 Y101.494 E0.00427 ; infill
;WIDTH:0.335467
G1 X115.071 Y101.730 E0.00692 ; infill
G1 X115.201 Y102.006 E0.00743 ; infill
;WIDTH:0.218672
G1 X115.373 Y102.344 E0.00554 ; infill
G1 X115.600 Y102.988 E0.00999 ; infill
G1 X115.523 Y103.057 F10800.000 ; move to first infill point
;WIDTH:0.325323
G1 F2400.000
G1 X115.498 Y102.763 E0.00694 ; infill
G1 X115.348 Y102.043 E0.01727 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.498 Y102.763 E-0.19407 ; wipe and retract
G1 X115.523 Y103.057 E-0.07796 ; wipe and retract
;WIPE_END
G1 E-2.12797 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X115.555 Y109.515 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.656 Y109.545 E0.00488 ; perimeter
G1 X115.822 Y109.691 E0.01026 ; perimeter
G1 X115.871 Y109.798 E0.00543 ; perimeter
G1 X115.895 Y110.005 E0.00966 ; perimeter
G1 X115.875 Y110.157 E0.00708 ; perimeter
G1 X115.790 Y110.320 E0.00855 ; perimeter
G1 X115.666 Y110.423 E0.00745 ; perimeter
G1 X115.596 Y110.448 E0.00344 ; perimeter
G1 X115.462 Y110.450 E0.00622 ; perimeter
G1 X115.271 Y110.369 E0.00959 ; perimeter
G1 X115.136 Y110.155 E0.01170 ; perimeter
G1 X115.119 Y110.089 E0.00317 ; perimeter
G1 X115.103 Y109.924 E0.00767 ; perimeter
G1 X115.158 Y109.733 E0.00923 ; perimeter
G1 X115.200 Y109.660 E0.00387 ; perimeter
G1 X115.291 Y109.574 E0.00579 ; perimeter
G1 X115.402 Y109.524 E0.00568 ; perimeter
G1 X115.495 Y109.518 E0.00429 ; perimeter
G1 X115.596 Y109.612 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.656 Y109.545 E-0.04304 ; wipe and retract
G1 X115.822 Y109.691 E-0.05845 ; wipe and retract
G1 X115.871 Y109.798 E-0.03091 ; wipe and retract
G1 X115.895 Y110.005 E-0.05501 ; wipe and retract
G1 X115.875 Y110.157 E-0.04036 ; wipe and retract
G1 X115.790 Y110.320 E-0.04873 ; wipe and retract
G1 X115.666 Y110.423 E-0.04246 ; wipe and retract
G1 X115.596 Y110.448 E-0.01959 ; wipe and retract
G1 X115.462 Y110.450 E-0.03544 ; wipe and retract
G1 X115.271 Y110.369 E-0.05463 ; wipe and retract
G1 X115.136 Y110.155 E-0.06664 ; wipe and retract
G1 X115.119 Y110.089 E-0.01807 ; wipe and retract
G1 X115.103 Y109.924 E-0.04370 ; wipe and retract
G1 X115.158 Y109.733 E-0.05261 ; wipe and retract
G1 X115.200 Y109.660 E-0.02207 ; wipe and retract
G1 X115.291 Y109.574 E-0.03298 ; wipe and retract
G1 X115.402 Y109.524 E-0.03236 ; wipe and retract
G1 X115.495 Y109.518 E-0.02447 ; wipe and retract
;WIPE_END
G1 E-1.67849 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 X115.095 Y114.976 ; move to first perimeter point
G1 Z5.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.279 Y115.017 E0.00874 ; perimeter
G1 X115.340 Y115.064 E0.00359 ; perimeter
G1 X115.445 Y115.227 E0.00898 ; perimeter
G1 X115.478 Y115.324 E0.00473 ; perimeter
G1 X115.469 Y115.392 E0.00321 ; perimeter
G1 X115.383 Y115.602 E0.01050 ; perimeter
G1 X115.318 Y115.689 E0.00502 ; perimeter
G1 X115.243 Y115.748 E0.00443 ; perimeter
G1 X115.144 Y115.774 E0.00474 ; perimeter
G1 X115.026 Y115.775 E0.00545 ; perimeter
G1 X114.858 Y115.724 E0.00814 ; perimeter
G1 X114.764 Y115.648 E0.00561 ; perimeter
G1 X114.678 Y115.450 E0.01000 ; perimeter
G1 X114.674 Y115.318 E0.00609 ; perimeter
G1 X114.713 Y115.165 E0.00735 ; perimeter
G1 X114.746 Y115.105 E0.00317 ; perimeter
G1 X114.828 Y115.029 E0.00517 ; perimeter
G1 X114.907 Y114.992 E0.00402 ; perimeter
G1 X115.035 Y114.974 E0.00600 ; perimeter
G1 X115.176 Y115.146 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:5.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;5.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.279 Y115.017 E-0.06533 ; wipe and retract
G1 X115.340 Y115.064 E-0.02045 ; wipe and retract
G1 X115.445 Y115.227 E-0.05115 ; wipe and retract
G1 X115.478 Y115.324 E-0.02693 ; wipe and retract
G1 X115.469 Y115.392 E-0.01830 ; wipe and retract
G1 X115.383 Y115.602 E-0.05984 ; wipe and retract
G1 X115.318 Y115.689 E-0.02859 ; wipe and retract
G1 X115.243 Y115.748 E-0.02524 ; wipe and retract
G1 X115.144 Y115.774 E-0.02701 ; wipe and retract
G1 X115.026 Y115.775 E-0.03106 ; wipe and retract
G1 X114.858 Y115.724 E-0.04636 ; wipe and retract
G1 X114.764 Y115.648 E-0.03196 ; wipe and retract
G1 X114.678 Y115.450 E-0.05697 ; wipe and retract
G1 X114.674 Y115.318 E-0.03467 ; wipe and retract
G1 X114.713 Y115.165 E-0.04190 ; wipe and retract
G1 X114.746 Y115.105 E-0.01807 ; wipe and retract
G1 X114.828 Y115.029 E-0.02945 ; wipe and retract
G1 X114.907 Y114.992 E-0.02288 ; wipe and retract
G1 X115.035 Y114.974 E-0.03418 ; wipe and retract
;WIPE_END
G1 E-1.72966 F2400.000 ; retract
G1 Z5.675 F10800.000 ; lift Z
G1 Z5.800 ; move to next layer (28)
;AFTER_LAYER_CHANGE
;5.8
G1 Z5.875 ; lift Z
G1 X105.064 Y115.808 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.057 Y115.750 E0.00270 ; perimeter
G1 X105.077 Y115.688 E0.00301 ; perimeter
G1 X105.165 Y115.580 E0.00646 ; perimeter
G1 X105.388 Y115.450 E0.01196 ; perimeter
G1 X105.759 Y115.383 E0.01745 ; perimeter
G1 X105.860 Y115.401 E0.00478 ; perimeter
G1 X106.075 Y115.397 E0.00995 ; perimeter
G1 X106.402 Y115.489 E0.01574 ; perimeter
G1 X106.553 Y115.593 E0.00846 ; perimeter
G1 X106.614 Y115.696 E0.00556 ; perimeter
G1 X106.625 Y115.767 E0.00335 ; perimeter
G1 X106.568 Y115.926 E0.00778 ; perimeter
G1 X106.449 Y116.047 E0.00787 ; perimeter
G1 X106.307 Y116.111 E0.00725 ; perimeter
G1 X105.899 Y116.190 E0.01923 ; perimeter
G1 X105.566 Y116.171 E0.01545 ; perimeter
G1 X105.263 Y116.065 E0.01486 ; perimeter
G1 X105.123 Y115.944 E0.00857 ; perimeter
G1 X105.088 Y115.863 E0.00411 ; perimeter
G1 X105.104 Y115.765 F10800.000 ; move inwards before travel
G1 X105.339 Y115.812 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.347511
G1 F2400.000
G1 X105.759 Y115.785 E0.01066 ; infill
G1 X105.872 Y115.795 E0.00289 ; infill
G1 X106.357 Y115.743 E0.01234 ; infill
G1 X106.370 Y115.766 F10800.000 ; move to first infill point
;WIDTH:0.15482
G1 F2400.000
G1 X105.680 Y115.936 E0.00662 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.370 Y115.766 E-0.18761 ; wipe and retract
;WIPE_END
G1 E-2.21239 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X114.734 Y115.601 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.676 Y115.439 E0.00797 ; perimeter
G1 X114.673 Y115.326 E0.00527 ; perimeter
G1 X114.710 Y115.168 E0.00751 ; perimeter
G1 X114.749 Y115.099 E0.00368 ; perimeter
G1 X114.824 Y115.029 E0.00472 ; perimeter
G1 X114.906 Y114.989 E0.00424 ; perimeter
G1 X115.045 Y114.971 E0.00650 ; perimeter
G1 X115.172 Y114.980 E0.00586 ; perimeter
G1 X115.282 Y115.013 E0.00534 ; perimeter
G1 X115.342 Y115.061 E0.00355 ; perimeter
G1 X115.447 Y115.224 E0.00899 ; perimeter
G1 X115.481 Y115.322 E0.00482 ; perimeter
G1 X115.400 Y115.575 E0.01232 ; perimeter
G1 X115.319 Y115.686 E0.00633 ; perimeter
G1 X115.241 Y115.747 E0.00460 ; perimeter
G1 X115.044 Y115.776 E0.00923 ; perimeter
G1 X114.865 Y115.724 E0.00866 ; perimeter
G1 X114.771 Y115.648 E0.00558 ; perimeter
G1 X114.812 Y115.448 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.676 Y115.439 E-0.06052 ; wipe and retract
G1 X114.673 Y115.326 E-0.03000 ; wipe and retract
G1 X114.710 Y115.168 E-0.04279 ; wipe and retract
G1 X114.749 Y115.099 E-0.02095 ; wipe and retract
G1 X114.824 Y115.029 E-0.02691 ; wipe and retract
G1 X114.906 Y114.989 E-0.02416 ; wipe and retract
G1 X115.045 Y114.971 E-0.03702 ; wipe and retract
G1 X115.172 Y114.980 E-0.03339 ; wipe and retract
G1 X115.282 Y115.013 E-0.03042 ; wipe and retract
G1 X115.342 Y115.061 E-0.02021 ; wipe and retract
G1 X115.447 Y115.224 E-0.05119 ; wipe and retract
G1 X115.481 Y115.322 E-0.02746 ; wipe and retract
G1 X115.400 Y115.575 E-0.07017 ; wipe and retract
G1 X115.319 Y115.686 E-0.03605 ; wipe and retract
G1 X115.241 Y115.747 E-0.02622 ; wipe and retract
G1 X115.044 Y115.776 E-0.05261 ; wipe and retract
G1 X114.865 Y115.724 E-0.04932 ; wipe and retract
G1 X114.771 Y115.648 E-0.03180 ; wipe and retract
;WIPE_END
G1 E-1.72881 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X115.286 Y109.486 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.411 Y109.423 E0.00648 ; perimeter
G1 X115.588 Y109.422 E0.00818 ; perimeter
G1 X115.662 Y109.449 E0.00366 ; perimeter
G1 X115.830 Y109.600 E0.01046 ; perimeter
G1 X115.873 Y109.696 E0.00489 ; perimeter
G1 X115.897 Y109.908 E0.00990 ; perimeter
G1 X115.878 Y110.056 E0.00690 ; perimeter
G1 X115.792 Y110.230 E0.00900 ; perimeter
G1 X115.673 Y110.334 E0.00730 ; perimeter
G1 X115.581 Y110.360 E0.00445 ; perimeter
G1 X115.488 Y110.360 E0.00428 ; perimeter
G1 X115.291 Y110.284 E0.00977 ; perimeter
G1 X115.138 Y110.043 E0.01326 ; perimeter
G1 X115.111 Y109.808 E0.01096 ; perimeter
G1 X115.164 Y109.623 E0.00890 ; perimeter
G1 X115.251 Y109.535 E0.00575 ; perimeter
G1 X115.417 Y109.538 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.411 Y109.423 E-0.05149 ; wipe and retract
G1 X115.588 Y109.422 E-0.04660 ; wipe and retract
G1 X115.662 Y109.449 E-0.02088 ; wipe and retract
G1 X115.830 Y109.600 E-0.05957 ; wipe and retract
G1 X115.873 Y109.696 E-0.02784 ; wipe and retract
G1 X115.897 Y109.908 E-0.05640 ; wipe and retract
G1 X115.878 Y110.056 E-0.03929 ; wipe and retract
G1 X115.792 Y110.230 E-0.05128 ; wipe and retract
G1 X115.673 Y110.334 E-0.04159 ; wipe and retract
G1 X115.581 Y110.360 E-0.02534 ; wipe and retract
G1 X115.488 Y110.360 E-0.02437 ; wipe and retract
G1 X115.291 Y110.284 E-0.05568 ; wipe and retract
G1 X115.138 Y110.043 E-0.07553 ; wipe and retract
G1 X115.111 Y109.808 E-0.06246 ; wipe and retract
G1 X115.164 Y109.623 E-0.05068 ; wipe and retract
G1 X115.251 Y109.535 E-0.03275 ; wipe and retract
;WIPE_END
G1 E-1.67826 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X115.670 Y103.368 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.539 Y103.398 E0.00620 ; perimeter
G1 X115.413 Y103.389 E0.00588 ; perimeter
G1 X115.264 Y103.298 E0.00809 ; perimeter
G1 X115.124 Y102.895 E0.01975 ; perimeter
G1 X115.109 Y102.755 E0.00653 ; perimeter
G1 X115.132 Y102.606 E0.00698 ; perimeter
G1 X115.066 Y102.314 E0.01384 ; perimeter
G1 X114.623 Y101.775 E0.03233 ; perimeter
G1 X114.477 Y101.490 E0.01486 ; perimeter
G1 X114.421 Y101.334 E0.00766 ; perimeter
G1 X114.425 Y101.207 E0.00590 ; perimeter
G1 X114.387 Y101.113 E0.00466 ; perimeter
G1 X114.473 Y100.919 E0.00984 ; perimeter
G1 X114.649 Y100.830 E0.00914 ; perimeter
G1 X114.983 Y100.978 E0.01693 ; perimeter
G1 X115.311 Y101.338 E0.02256 ; perimeter
G1 X115.473 Y101.849 E0.02483 ; perimeter
G1 X115.496 Y102.103 E0.01182 ; perimeter
G1 X115.601 Y102.249 E0.00833 ; perimeter
G1 X115.693 Y102.441 E0.00985 ; perimeter
G1 X115.819 Y102.614 E0.00992 ; perimeter
G1 X115.873 Y102.798 E0.00885 ; perimeter
G1 X115.855 Y103.108 E0.01441 ; perimeter
G1 X115.777 Y103.283 E0.00883 ; perimeter
G1 X115.718 Y103.332 E0.00359 ; perimeter
G1 X115.558 Y103.295 F10800.000 ; move inwards before travel
G1 X115.580 Y103.132 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.167688
G1 F2400.000
G1 X115.434 Y102.590 E0.00583 ; infill
;WIDTH:0.157539
G1 X115.364 Y102.390 E0.00202 ; infill
;WIDTH:0.108993
G1 X115.341 Y102.337 E0.00032 ; infill
G1 X115.327 Y102.375 F10800.000 ; move to first infill point
;WIDTH:0.303091
G1 F2400.000
G1 X115.592 Y103.105 E0.01681 ; infill
G1 X115.522 Y103.076 F10800.000 ; move to first infill point
;WIDTH:0.226256
G1 F2400.000
G1 X115.526 Y103.029 E0.00073 ; infill
;WIDTH:0.248776
G1 X115.465 Y102.523 E0.00871 ; infill
G1 X115.250 Y102.054 F10800.000 ; move to first infill point
;WIDTH:0.366238
G1 F2400.000
G1 X114.961 Y101.552 E0.01557 ; infill
G1 X114.804 Y101.325 E0.00742 ; infill
;WIDTH:0.332849
G1 X114.647 Y101.098 E0.00665 ; infill
G1 X114.725 Y101.136 F10800.000 ; move to first infill point
;WIDTH:0.269468
G1 F2400.000
G1 X114.982 Y101.832 E0.01396 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.725 Y101.136 E-0.19561 ; wipe and retract
;WIPE_END
G1 E-2.20439 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X111.590 Y97.968 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.546 Y97.960 E0.00152 ; perimeter
G1 X111.427 Y97.991 E0.00414 ; perimeter
G1 X111.457 Y97.880 E0.00391 ; perimeter
G1 X111.537 Y97.938 E0.00338 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.546 Y97.960 E-0.00622 ; wipe and retract
G1 X111.427 Y97.991 E-0.03229 ; wipe and retract
G1 X111.457 Y97.880 E-0.03051 ; wipe and retract
G1 X111.537 Y97.938 E-0.02638 ; wipe and retract
;WIPE_END
G1 E-2.30461 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X113.593 Y98.512 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.775 Y98.498 E0.00617 ; perimeter
G1 X113.726 Y98.629 E0.00475 ; perimeter
G1 X113.638 Y98.552 E0.00395 ; perimeter
G1 X113.607 Y98.028 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.758 Y97.855 E0.01063 ; perimeter
G1 X113.964 Y97.717 E0.01144 ; perimeter
G1 X114.017 Y97.658 E0.00373 ; perimeter
G1 X114.229 Y97.544 E0.01113 ; perimeter
G1 X114.345 Y97.522 E0.00548 ; perimeter
G1 X114.475 Y97.539 E0.00606 ; perimeter
G1 X114.544 Y97.612 E0.00466 ; perimeter
G1 X114.578 Y97.811 E0.00936 ; perimeter
G1 X114.484 Y98.192 E0.01816 ; perimeter
G1 X114.376 Y98.426 E0.01192 ; perimeter
G1 X114.278 Y98.528 E0.00657 ; perimeter
G1 X114.127 Y98.932 E0.01995 ; perimeter
G1 X114.031 Y99.308 E0.01799 ; perimeter
G1 X114.035 Y99.376 E0.00315 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.031 Y99.546 E0.00713 ; perimeter (bridge)
G1 X113.910 Y99.431 E0.00698 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.644 Y99.174 E0.01712 ; perimeter
G1 X113.568 Y99.132 E0.00401 ; perimeter
G1 X113.348 Y98.939 E0.01360 ; perimeter
G1 X112.145 Y98.546 E0.05859 ; perimeter
G1 X111.568 Y98.453 E0.02706 ; perimeter
G1 X111.423 Y98.490 E0.00694 ; perimeter
G1 X111.250 Y98.461 E0.00814 ; perimeter
G1 X111.099 Y98.481 E0.00706 ; perimeter
G1 X110.973 Y98.366 E0.00789 ; perimeter
G1 X110.976 Y98.266 E0.00465 ; perimeter
G1 X110.910 Y98.023 E0.01165 ; perimeter
G1 X110.967 Y97.848 E0.00851 ; perimeter
G1 X110.950 Y97.715 E0.00622 ; perimeter
G1 X110.999 Y97.601 E0.00575 ; perimeter
G1 X111.016 Y97.431 E0.00790 ; perimeter
G1 X111.054 Y97.360 E0.00377 ; perimeter
G1 X111.165 Y97.285 E0.00618 ; perimeter
G1 X111.292 Y97.267 E0.00596 ; perimeter
G1 X111.470 Y97.311 E0.00849 ; perimeter
G1 X111.991 Y97.640 E0.02855 ; perimeter
G1 X112.886 Y98.026 E0.04513 ; perimeter
G1 X113.264 Y98.056 E0.01755 ; perimeter
G1 X113.547 Y98.032 E0.01318 ; perimeter
G1 X113.811 Y98.134 F10800.000 ; move inwards before travel
G1 X113.160 Y98.452 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.306503
G1 F2400.000
G1 X112.818 Y98.384 E0.00764 ; infill
;WIDTH:0.28645
G1 X112.022 Y98.106 E0.01708 ; infill
;WIDTH:0.399831
G1 X111.818 Y98.046 E0.00631 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.022 Y98.106 E-0.05610 ; wipe and retract
;WIPE_END
G1 E-2.34390 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X108.481 Y98.449 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.236 Y98.526 E0.00871 ; perimeter
G1 X108.402 Y98.378 E0.00753 ; perimeter
G1 X108.438 Y98.406 E0.00157 ; perimeter
G1 X109.070 Y98.424 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.110 Y98.583 E0.00759 ; perimeter
G1 X109.094 Y98.711 E0.00599 ; perimeter
G1 X109.033 Y98.808 E0.00531 ; perimeter
G1 X108.871 Y98.897 E0.00858 ; perimeter
G1 X108.695 Y98.941 E0.00841 ; perimeter
G1 X108.552 Y98.932 E0.00660 ; perimeter
G1 X108.302 Y99.011 E0.01215 ; perimeter
G1 X108.043 Y99.137 E0.01336 ; perimeter
G1 X107.333 Y99.633 E0.04013 ; perimeter
G1 X107.030 Y99.799 E0.01602 ; perimeter
G1 X106.562 Y99.967 E0.02304 ; perimeter
G1 X106.118 Y100.068 E0.02108 ; perimeter
G1 X105.940 Y100.032 E0.00838 ; perimeter
G1 X105.732 Y100.050 E0.00970 ; perimeter
G1 X105.573 Y99.981 E0.00800 ; perimeter
G1 X105.491 Y99.968 E0.00387 ; perimeter
G1 X105.483 Y99.862 E0.00492 ; perimeter
G1 X105.535 Y99.773 E0.00478 ; perimeter
G1 X105.870 Y99.454 E0.02141 ; perimeter
G1 X106.161 Y99.253 E0.01640 ; perimeter
G1 X107.042 Y98.894 E0.04407 ; perimeter
G1 X107.361 Y98.661 E0.01829 ; perimeter
G1 X108.158 Y97.950 E0.04947 ; perimeter
G1 X108.213 Y97.919 E0.00293 ; perimeter
G1 X108.378 Y97.876 E0.00792 ; perimeter
G1 X108.652 Y97.939 E0.01298 ; perimeter
G1 X108.978 Y98.263 E0.02131 ; perimeter
G1 X109.040 Y98.372 E0.00580 ; perimeter
G1 X108.971 Y98.555 F10800.000 ; move inwards before travel
G1 X108.830 Y98.617 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.10426
G1 F2400.000
G1 X108.641 Y98.674 E0.00101 ; infill
G1 X108.030 Y98.653 F10800.000 ; move to first infill point
;WIDTH:0.393284
G1 F2400.000
G1 X107.847 Y98.776 E0.00645 ; infill
;WIDTH:0.38073
G1 X107.612 Y98.960 E0.00836 ; infill
;WIDTH:0.343623
G1 X107.246 Y99.223 E0.01127 ; infill
;WIDTH:0.336517
G1 X106.859 Y99.418 E0.01060 ; infill
G1 X106.233 Y99.658 E0.01636 ; infill
;WIDTH:0.308957
G1 X106.113 Y99.711 E0.00288 ; infill
;WIDTH:0.259329
G1 X105.905 Y99.754 E0.00383 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.113 Y99.711 E-0.05619 ; wipe and retract
;WIPE_END
G1 E-2.34381 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X104.051 Y100.833 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.037 Y101.049 E0.01003 ; perimeter
G1 X103.916 Y101.353 E0.01514 ; perimeter
G1 X103.717 Y101.593 E0.01443 ; perimeter
G1 X103.428 Y101.824 E0.01715 ; perimeter
G1 X103.238 Y101.906 E0.00959 ; perimeter
G1 X102.869 Y102.134 E0.02007 ; perimeter
G1 X102.574 Y102.457 E0.02026 ; perimeter
G1 X102.265 Y102.871 E0.02395 ; perimeter
G1 X102.246 Y102.930 E0.00288 ; perimeter
G1 X102.039 Y103.238 E0.01719 ; perimeter
G1 X102.034 Y103.316 E0.00359 ; perimeter
G1 X101.867 Y103.627 E0.01638 ; perimeter
G1 X101.852 Y103.743 E0.00542 ; perimeter
G1 X101.672 Y103.974 E0.01356 ; perimeter
G1 X101.468 Y104.054 E0.01015 ; perimeter
G1 X101.264 Y104.043 E0.00945 ; perimeter
G1 X101.100 Y103.969 E0.00836 ; perimeter
G1 X101.021 Y103.870 E0.00588 ; perimeter
G1 X100.934 Y103.803 E0.00507 ; perimeter
G1 X100.877 Y103.688 E0.00593 ; perimeter
G1 X100.885 Y103.547 E0.00657 ; perimeter
G1 X100.989 Y103.315 E0.01175 ; perimeter
G1 X101.369 Y102.946 E0.02454 ; perimeter
G1 X102.459 Y101.998 E0.06692 ; perimeter
G1 X102.939 Y101.219 E0.04238 ; perimeter
G1 X103.152 Y100.999 E0.01420 ; perimeter
G1 X103.372 Y100.849 E0.01233 ; perimeter
G1 X103.603 Y100.787 E0.01108 ; perimeter
G1 X103.901 Y100.784 E0.01379 ; perimeter
G1 X103.994 Y100.815 E0.00454 ; perimeter
G1 X103.929 Y101.012 F10800.000 ; move inwards before travel
G1 X103.731 Y101.027 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.374425
G1 F2400.000
G1 X103.251 Y101.462 E0.01785 ; infill
;WIDTH:0.347493
G1 X102.954 Y101.798 E0.01136 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.251 Y101.462 E-0.11838 ; wipe and retract
;WIPE_END
G1 E-2.28162 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X101.122 Y103.621 ; move to first infill point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.336581
G1 F2400.000
G1 X101.192 Y103.608 E0.00175 ; infill
;WIDTH:0.372215
G1 X101.263 Y103.595 E0.00196 ; infill
;WIDTH:0.407848
G1 X101.333 Y103.582 E0.00217 ; infill
;WIDTH:0.434063
G1 X101.348 Y103.580 E0.00050 ; infill
;WIDTH:0.460278
G1 X101.364 Y103.578 E0.00053 ; infill
;WIDTH:0.467786
G1 X101.407 Y103.558 E0.00168 ; infill
G1 X101.463 Y103.461 E0.00396 ; infill
;WIDTH:0.343558
G1 X102.072 Y102.686 E0.02464 ; infill
G1 X102.078 Y102.691 F10800.000 ; move to first infill point
;WIDTH:0.180263
G1 F2400.000
G1 X101.716 Y103.101 E0.00623 ; infill
;WIDTH:0.282482
G1 X101.266 Y103.779 E0.01623 ; infill
G1 X99.919 Y105.062 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.953 Y105.201 E0.00664 ; perimeter
G1 X99.895 Y105.518 E0.01495 ; perimeter
G1 X99.794 Y105.655 E0.00786 ; perimeter
G1 X99.363 Y106.004 E0.02569 ; perimeter
G1 X99.189 Y106.182 E0.01153 ; perimeter
G1 X98.978 Y106.353 E0.01255 ; perimeter
G1 X98.680 Y106.849 E0.02683 ; perimeter
G1 X98.415 Y107.130 E0.01786 ; perimeter
G1 X98.335 Y107.171 E0.00417 ; perimeter
G1 X98.222 Y107.293 E0.00769 ; perimeter
G1 X98.151 Y107.420 E0.00675 ; perimeter
G1 X97.809 Y107.791 E0.02335 ; perimeter
G1 X97.562 Y107.980 E0.01443 ; perimeter
G1 X97.164 Y108.396 E0.02666 ; perimeter
G1 X97.064 Y108.706 E0.01512 ; perimeter
G1 X97.023 Y108.775 E0.00371 ; perimeter
G1 X96.892 Y108.898 E0.00832 ; perimeter
G1 X96.799 Y108.924 E0.00444 ; perimeter
G1 X96.674 Y108.913 E0.00583 ; perimeter
G1 X96.461 Y108.762 E0.01208 ; perimeter
G1 X96.310 Y108.554 E0.01193 ; perimeter
G1 X96.251 Y108.323 E0.01100 ; perimeter
G1 X96.264 Y108.138 E0.00861 ; perimeter
G1 X96.328 Y107.946 E0.00938 ; perimeter
G1 X96.712 Y107.544 E0.02575 ; perimeter
G1 X97.237 Y107.252 E0.02783 ; perimeter
G1 X97.534 Y107.146 E0.01460 ; perimeter
G1 X97.859 Y106.887 E0.01927 ; perimeter
G1 X98.036 Y106.481 E0.02053 ; perimeter
G1 X98.031 Y106.220 E0.01206 ; perimeter
G1 X98.115 Y106.012 E0.01041 ; perimeter
G1 X98.238 Y105.808 E0.01100 ; perimeter
G1 X98.384 Y105.646 E0.01012 ; perimeter
G1 X98.951 Y105.225 E0.03274 ; perimeter
G1 X99.119 Y105.007 E0.01274 ; perimeter
G1 X99.386 Y104.796 E0.01577 ; perimeter
G1 X99.504 Y104.774 E0.00555 ; perimeter
G1 X99.630 Y104.795 E0.00592 ; perimeter
G1 X99.660 Y104.830 E0.00212 ; perimeter
G1 X99.808 Y104.905 E0.00769 ; perimeter
G1 X99.895 Y105.007 E0.00620 ; perimeter
G1 X99.837 Y105.179 F10800.000 ; move inwards before travel
G1 X99.668 Y105.112 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.488593
G1 F2400.000
G1 X99.364 Y105.426 E0.01622 ; infill
;WIDTH:0.459079
G1 X99.275 Y105.517 E0.00438 ; infill
;WIDTH:0.429511
G1 X98.658 Y106.024 E0.02569 ; infill
G1 X98.483 Y106.304 E0.01060 ; infill
G1 X97.896 Y107.341 F10800.000 ; move to first infill point
;WIDTH:0.317588
G1 F2400.000
G1 X97.390 Y107.615 E0.01312 ; infill
G1 X97.153 Y107.793 E0.00678 ; infill
;WIDTH:0.443017
G1 X96.991 Y107.915 E0.00672 ; infill
G1 X96.739 Y108.193 E0.01250 ; infill
G1 X96.654 Y108.603 E0.01393 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.739 Y108.193 E-0.11046 ; wipe and retract
G1 X96.991 Y107.915 E-0.09916 ; wipe and retract
G1 X97.153 Y107.793 E-0.05331 ; wipe and retract
;WIPE_END
G1 E-2.13707 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X95.100 Y111.568 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.170 Y111.666 E0.00557 ; perimeter
G1 X95.234 Y111.958 E0.01388 ; perimeter
G1 X95.175 Y112.293 E0.01576 ; perimeter
G1 X95.003 Y112.547 E0.01420 ; perimeter
G1 X94.846 Y112.647 E0.00862 ; perimeter
G1 X94.688 Y112.676 E0.00742 ; perimeter
G1 X94.622 Y112.653 E0.00325 ; perimeter
G1 X94.401 Y112.386 E0.01605 ; perimeter
G1 X94.361 Y112.255 E0.00634 ; perimeter
G1 X94.371 Y111.974 E0.01305 ; perimeter
G1 X94.454 Y111.772 E0.01008 ; perimeter
G1 X94.621 Y111.602 E0.01107 ; perimeter
G1 X94.782 Y111.535 E0.00809 ; perimeter
G1 X94.989 Y111.516 E0.00960 ; perimeter
G1 X95.045 Y111.543 E0.00290 ; perimeter
G1 X95.083 Y111.687 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.170 Y111.666 E-0.04617 ; wipe and retract
G1 X95.234 Y111.958 E-0.07905 ; wipe and retract
G1 X95.175 Y112.293 E-0.08981 ; wipe and retract
G1 X95.003 Y112.547 E-0.08087 ; wipe and retract
G1 X94.846 Y112.647 E-0.04910 ; wipe and retract
G1 X94.688 Y112.676 E-0.04227 ; wipe and retract
G1 X94.622 Y112.653 E-0.01853 ; wipe and retract
G1 X94.401 Y112.386 E-0.09144 ; wipe and retract
G1 X94.361 Y112.255 E-0.03614 ; wipe and retract
G1 X94.371 Y111.974 E-0.07435 ; wipe and retract
G1 X94.454 Y111.772 E-0.05741 ; wipe and retract
G1 X94.621 Y111.602 E-0.06306 ; wipe and retract
G1 X94.782 Y111.535 E-0.04611 ; wipe and retract
G1 X94.989 Y111.516 E-0.05471 ; wipe and retract
G1 X95.045 Y111.543 E-0.01651 ; wipe and retract
;WIPE_END
G1 E-1.55447 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 X94.912 Y113.645 ; move to first perimeter point
G1 Z5.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.050 Y113.706 E0.00698 ; perimeter
G1 X95.191 Y113.971 E0.01390 ; perimeter
G1 X95.234 Y114.190 E0.01035 ; perimeter
G1 X95.201 Y114.342 E0.00721 ; perimeter
G1 X94.987 Y114.608 E0.01579 ; perimeter
G1 X94.757 Y114.693 E0.01137 ; perimeter
G1 X94.643 Y114.690 E0.00526 ; perimeter
G1 X94.540 Y114.651 E0.00512 ; perimeter
G1 X94.455 Y114.583 E0.00506 ; perimeter
G1 X94.374 Y114.414 E0.00867 ; perimeter
G1 X94.359 Y114.237 E0.00822 ; perimeter
G1 X94.442 Y113.935 E0.01449 ; perimeter
G1 X94.703 Y113.698 E0.01635 ; perimeter
G1 X94.796 Y113.645 E0.00499 ; perimeter
G1 X94.861 Y113.632 E0.00305 ; perimeter
G1 X94.960 Y113.788 F10800.000 ; move inwards before travel
G1 X96.049 Y115.074 ; move to first perimeter point
G1 F1800.000
G1 X96.196 Y115.057 E0.00687 ; perimeter
G1 X96.370 Y115.085 E0.00812 ; perimeter
G1 X96.610 Y115.238 E0.01319 ; perimeter
G1 X97.248 Y115.401 E0.03051 ; perimeter
G1 X97.674 Y115.405 E0.01971 ; perimeter
G1 X98.220 Y115.472 E0.02549 ; perimeter
G1 X98.748 Y115.493 E0.02447 ; perimeter
G1 X99.016 Y115.440 E0.01269 ; perimeter
G1 X99.517 Y115.432 E0.02318 ; perimeter
G1 X100.269 Y115.452 E0.03486 ; perimeter
G1 X101.080 Y115.561 E0.03792 ; perimeter
G1 X101.486 Y115.710 E0.02003 ; perimeter
G1 X101.561 Y115.779 E0.00472 ; perimeter
G1 X101.269 Y115.963 E0.01601 ; perimeter
G1 X101.128 Y116.018 E0.00699 ; perimeter
G1 X100.570 Y116.121 E0.02631 ; perimeter
G1 X99.569 Y116.164 E0.04640 ; perimeter
G1 X98.826 Y116.133 E0.03442 ; perimeter
G1 X97.867 Y116.149 E0.04444 ; perimeter
G1 X97.618 Y116.183 E0.01161 ; perimeter
G1 X97.182 Y116.186 E0.02019 ; perimeter
G1 X96.725 Y116.139 E0.02129 ; perimeter
G1 X96.303 Y116.051 E0.01996 ; perimeter
G1 X96.134 Y115.974 E0.00865 ; perimeter
G1 X95.987 Y115.868 E0.00838 ; perimeter
G1 X95.838 Y115.645 E0.01244 ; perimeter
G1 X95.827 Y115.506 E0.00645 ; perimeter
G1 X95.831 Y115.433 E0.00341 ; perimeter
G1 X95.864 Y115.399 E0.00217 ; perimeter
G1 X95.974 Y115.116 E0.01404 ; perimeter
G1 X95.996 Y115.099 E0.00131 ; perimeter
G1 X96.170 Y115.160 F10800.000 ; move inwards before travel
G1 X96.127 Y115.387 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.4254
G1 F2400.000
G1 X96.305 Y115.560 E0.00791 ; infill
G1 X96.466 Y115.645 E0.00578 ; infill
;WIDTH:0.330742
G1 X97.201 Y115.793 E0.01794 ; infill
G1 X97.833 Y115.789 E0.01512 ; infill
;WIDTH:0.202962
G1 X98.782 Y115.813 E0.01263 ; infill
;WIDTH:0.212207
G1 X98.833 Y115.808 E0.00072 ; infill
;WIDTH:0.244696
G1 X99.053 Y115.791 E0.00371 ; infill
G1 X100.388 Y115.799 E0.02239 ; infill
;WIDTH:0.144943
G1 X100.866 Y115.798 E0.00405 ; infill
;LAYER_CHANGE
;Z:6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.388 Y115.799 E-0.12611 ; wipe and retract
;WIPE_END
G1 E-2.27389 F2400.000 ; retract
G1 Z5.875 F10800.000 ; lift Z
G1 Z6.000 ; move to next layer (29)
;AFTER_LAYER_CHANGE
;6
G1 Z6.075 ; lift Z
G1 X115.137 Y109.969 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.115 Y109.687 E0.01314 ; perimeter
G1 X115.162 Y109.533 E0.00744 ; perimeter
G1 X115.254 Y109.408 E0.00718 ; perimeter
G1 X115.429 Y109.310 E0.00931 ; perimeter
G1 X115.598 Y109.329 E0.00786 ; perimeter
G1 X115.742 Y109.409 E0.00765 ; perimeter
G1 X115.836 Y109.493 E0.00580 ; perimeter
G1 X115.879 Y109.591 E0.00497 ; perimeter
G1 X115.901 Y109.842 E0.01167 ; perimeter
G1 X115.878 Y109.987 E0.00682 ; perimeter
G1 X115.799 Y110.137 E0.00785 ; perimeter
G1 X115.681 Y110.247 E0.00745 ; perimeter
G1 X115.539 Y110.274 E0.00668 ; perimeter
G1 X115.286 Y110.190 E0.01236 ; perimeter
G1 X115.171 Y110.019 E0.00955 ; perimeter
G1 X115.317 Y109.750 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.115 Y109.687 E-0.08896 ; wipe and retract
G1 X115.162 Y109.533 E-0.04238 ; wipe and retract
G1 X115.254 Y109.408 E-0.04088 ; wipe and retract
G1 X115.429 Y109.310 E-0.05302 ; wipe and retract
G1 X115.598 Y109.329 E-0.04478 ; wipe and retract
G1 X115.742 Y109.409 E-0.04356 ; wipe and retract
G1 X115.836 Y109.493 E-0.03305 ; wipe and retract
G1 X115.879 Y109.591 E-0.02832 ; wipe and retract
G1 X115.901 Y109.842 E-0.06651 ; wipe and retract
G1 X115.878 Y109.987 E-0.03886 ; wipe and retract
G1 X115.799 Y110.137 E-0.04471 ; wipe and retract
G1 X115.681 Y110.247 E-0.04242 ; wipe and retract
G1 X115.539 Y110.274 E-0.03806 ; wipe and retract
G1 X115.286 Y110.190 E-0.07040 ; wipe and retract
G1 X115.171 Y110.019 E-0.05439 ; wipe and retract
;WIPE_END
G1 E-1.66970 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X114.905 Y114.987 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.042 Y114.969 E0.00638 ; perimeter
G1 X115.290 Y115.014 E0.01167 ; perimeter
G1 X115.344 Y115.057 E0.00322 ; perimeter
G1 X115.448 Y115.221 E0.00899 ; perimeter
G1 X115.484 Y115.319 E0.00483 ; perimeter
G1 X115.468 Y115.426 E0.00500 ; perimeter
G1 X115.413 Y115.555 E0.00651 ; perimeter
G1 X115.321 Y115.682 E0.00723 ; perimeter
G1 X115.240 Y115.747 E0.00483 ; perimeter
G1 X115.062 Y115.777 E0.00835 ; perimeter
G1 X114.872 Y115.724 E0.00917 ; perimeter
G1 X114.739 Y115.606 E0.00820 ; perimeter
G1 X114.675 Y115.429 E0.00873 ; perimeter
G1 X114.672 Y115.333 E0.00444 ; perimeter
G1 X114.708 Y115.171 E0.00767 ; perimeter
G1 X114.752 Y115.093 E0.00417 ; perimeter
G1 X114.851 Y115.013 E0.00589 ; perimeter
G1 X115.010 Y115.077 F10800.000 ; move inwards before travel
G1 X115.068 Y115.364 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.344202
G1 F2400.000
G1 X115.065 Y115.361 E0.00009 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.068 Y115.364 E-0.00099 ; wipe and retract
;WIPE_END
G1 E-2.39901 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X105.314 Y115.845 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.308 Y115.696 E0.00689 ; perimeter
G1 X105.408 Y115.566 E0.00759 ; perimeter
G1 X105.621 Y115.452 E0.01121 ; perimeter
G1 X105.941 Y115.386 E0.01511 ; perimeter
G1 X106.295 Y115.393 E0.01642 ; perimeter
G1 X106.645 Y115.491 E0.01683 ; perimeter
G1 X106.789 Y115.593 E0.00817 ; perimeter
G1 X106.851 Y115.691 E0.00538 ; perimeter
G1 X106.860 Y115.772 E0.00375 ; perimeter
G1 X106.813 Y115.921 E0.00724 ; perimeter
G1 X106.684 Y116.047 E0.00838 ; perimeter
G1 X106.523 Y116.117 E0.00810 ; perimeter
G1 X106.119 Y116.190 E0.01906 ; perimeter
G1 X105.802 Y116.170 E0.01469 ; perimeter
G1 X105.515 Y116.073 E0.01405 ; perimeter
G1 X105.360 Y115.940 E0.00942 ; perimeter
G1 X105.340 Y115.899 E0.00213 ; perimeter
G1 X105.418 Y115.739 F10800.000 ; move inwards before travel
G1 X105.580 Y115.811 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.34283
G1 F2400.000
G1 X105.996 Y115.791 E0.01038 ; infill
;WIDTH:0.350887
G1 X106.593 Y115.743 E0.01534 ; infill
G1 X106.606 Y115.754 F10800.000 ; move to first infill point
;WIDTH:0.193233
G1 F2400.000
G1 X105.902 Y115.934 E0.00908 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.606 Y115.754 E-0.19174 ; wipe and retract
;WIPE_END
G1 E-2.20826 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X100.979 Y115.783 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.906 Y115.859 E0.00489 ; perimeter
G1 X100.538 Y116.012 E0.01846 ; perimeter
G1 X99.910 Y116.124 E0.02956 ; perimeter
G1 X99.131 Y116.166 E0.03612 ; perimeter
G1 X98.798 Y116.156 E0.01545 ; perimeter
G1 X97.967 Y116.190 E0.03852 ; perimeter
G1 X97.498 Y116.178 E0.02171 ; perimeter
G1 X97.289 Y116.132 E0.00995 ; perimeter
G1 X96.929 Y116.103 E0.01673 ; perimeter
G1 X96.359 Y115.971 E0.02709 ; perimeter
G1 X96.100 Y115.872 E0.01286 ; perimeter
G1 X95.942 Y115.755 E0.00909 ; perimeter
G1 X95.810 Y115.578 E0.01021 ; perimeter
G1 X95.786 Y115.309 E0.01254 ; perimeter
G1 X95.835 Y115.098 E0.01003 ; perimeter
G1 X95.908 Y114.970 E0.00681 ; perimeter
G1 X96.005 Y114.923 E0.00500 ; perimeter
G1 X96.303 Y114.979 E0.01405 ; perimeter
G1 X96.686 Y115.231 E0.02123 ; perimeter
G1 X97.336 Y115.415 E0.03133 ; perimeter
G1 X97.467 Y115.377 E0.00631 ; perimeter
G1 X97.905 Y115.382 E0.02029 ; perimeter
G1 X97.956 Y115.367 E0.00246 ; perimeter
G1 X99.862 Y115.467 E0.08841 ; perimeter
G1 X100.314 Y115.530 E0.02115 ; perimeter
G1 X100.856 Y115.693 E0.02623 ; perimeter
G1 X100.931 Y115.748 E0.00427 ; perimeter
G1 X100.883 Y115.826 F10800.000 ; move inwards before travel
G1 X100.276 Y115.791 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.136066
G1 F2400.000
G1 X99.829 Y115.797 E0.00346 ; infill
;WIDTH:0.263307
G1 X98.259 Y115.786 E0.02878 ; infill
;WIDTH:0.377159
G1 X97.964 Y115.785 E0.00820 ; infill
;WIDTH:0.369849
G1 X97.547 Y115.779 E0.01134 ; infill
;WIDTH:0.36155
G1 X97.522 Y115.776 E0.00067 ; infill
G1 X97.370 Y115.781 F10800.000 ; move to first infill point
;WIDTH:0.281806
G1 F2400.000
G1 X97.349 Y115.781 E0.00043 ; infill
;WIDTH:0.273037
G1 X96.988 Y115.719 E0.00700 ; infill
G1 X96.541 Y115.604 E0.00883 ; infill
;WIDTH:0.368162
G1 X96.307 Y115.493 E0.00701 ; infill
G1 X96.045 Y115.261 E0.00948 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.307 Y115.493 E-0.09253 ; wipe and retract
G1 X96.541 Y115.604 E-0.06838 ; wipe and retract
;WIPE_END
G1 E-2.23908 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X94.754 Y112.696 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X94.637 Y112.656 E0.00572 ; perimeter
G1 X94.451 Y112.384 E0.01526 ; perimeter
G1 X94.400 Y112.173 E0.01006 ; perimeter
G1 X94.409 Y111.901 E0.01261 ; perimeter
G1 X94.433 Y111.818 E0.00400 ; perimeter
G1 X94.538 Y111.630 E0.00998 ; perimeter
G1 X94.716 Y111.474 E0.01094 ; perimeter
G1 X94.834 Y111.428 E0.00587 ; perimeter
G1 X95.101 Y111.388 E0.01252 ; perimeter
G1 X95.297 Y111.446 E0.00947 ; perimeter
G1 X95.253 Y111.638 E0.00914 ; perimeter
G1 X95.303 Y111.891 E0.01195 ; perimeter
G1 X95.230 Y112.281 E0.01837 ; perimeter
G1 X95.140 Y112.413 E0.00740 ; perimeter
G1 X95.084 Y112.634 E0.01057 ; perimeter
G1 X95.007 Y112.685 E0.00429 ; perimeter
G1 X94.954 Y113.198 E0.02388 ; perimeter
G1 X94.776 Y112.752 E0.02222 ; perimeter
G1 X94.715 Y112.579 F10800.000 ; move inwards before travel
G1 X95.259 Y114.404 ; move to first perimeter point
G1 F1800.000
G1 X95.100 Y114.495 E0.00851 ; perimeter
G1 X94.810 Y114.596 E0.01425 ; perimeter
G1 X94.667 Y114.592 E0.00662 ; perimeter
G1 X94.503 Y114.480 E0.00919 ; perimeter
G1 X94.418 Y114.290 E0.00963 ; perimeter
G1 X94.407 Y114.144 E0.00676 ; perimeter
G1 X94.473 Y113.898 E0.01180 ; perimeter
G1 X94.633 Y113.647 E0.01378 ; perimeter
G1 X94.754 Y113.564 E0.00681 ; perimeter
G1 X94.951 Y113.226 E0.01813 ; perimeter
G1 X94.939 Y113.347 E0.00564 ; perimeter
G1 X95.119 Y113.524 E0.01173 ; perimeter
G1 X95.174 Y113.694 E0.00827 ; perimeter
G1 X95.240 Y113.814 E0.00635 ; perimeter
G1 X95.297 Y114.117 E0.01425 ; perimeter
G1 X95.274 Y114.206 E0.00426 ; perimeter
G1 X95.272 Y114.347 E0.00653 ; perimeter
G1 X95.080 Y114.364 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.100 Y114.495 E-0.05994 ; wipe and retract
G1 X94.810 Y114.596 E-0.08115 ; wipe and retract
G1 X94.667 Y114.592 E-0.03773 ; wipe and retract
G1 X94.503 Y114.480 E-0.05235 ; wipe and retract
G1 X94.418 Y114.290 E-0.05487 ; wipe and retract
G1 X94.407 Y114.144 E-0.03852 ; wipe and retract
G1 X94.473 Y113.898 E-0.06722 ; wipe and retract
G1 X94.633 Y113.647 E-0.07852 ; wipe and retract
G1 X94.754 Y113.564 E-0.03879 ; wipe and retract
G1 X94.951 Y113.226 E-0.10328 ; wipe and retract
G1 X94.939 Y113.347 E-0.03211 ; wipe and retract
G1 X95.119 Y113.524 E-0.06681 ; wipe and retract
G1 X95.174 Y113.694 E-0.04710 ; wipe and retract
G1 X95.240 Y113.814 E-0.03617 ; wipe and retract
G1 X95.297 Y114.117 E-0.08118 ; wipe and retract
G1 X95.274 Y114.206 E-0.02425 ; wipe and retract
G1 X95.272 Y114.347 E-0.03720 ; wipe and retract
;WIPE_END
G1 E-1.46279 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X96.812 Y109.100 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X96.693 Y109.064 E0.00577 ; perimeter
G1 X96.498 Y108.904 E0.01169 ; perimeter
G1 X96.360 Y108.664 E0.01281 ; perimeter
G1 X96.298 Y108.426 E0.01142 ; perimeter
G1 X96.328 Y108.182 E0.01135 ; perimeter
G1 X96.375 Y108.041 E0.00693 ; perimeter
G1 X96.650 Y107.719 E0.01960 ; perimeter
G1 X96.890 Y107.480 E0.01565 ; perimeter
G1 X97.245 Y107.233 E0.02004 ; perimeter
G1 X97.504 Y107.106 E0.01336 ; perimeter
G1 X97.880 Y106.818 E0.02195 ; perimeter
G1 X98.233 Y105.970 E0.04258 ; perimeter
G1 X98.652 Y105.503 E0.02905 ; perimeter
G1 X99.035 Y105.207 E0.02239 ; perimeter
G1 X99.120 Y105.097 E0.00647 ; perimeter
G1 X99.407 Y104.871 E0.01693 ; perimeter
G1 X99.547 Y104.850 E0.00657 ; perimeter
G1 X99.657 Y104.867 E0.00513 ; perimeter
G1 X99.785 Y104.930 E0.00661 ; perimeter
G1 X99.913 Y105.069 E0.00873 ; perimeter
G1 X99.983 Y105.298 E0.01109 ; perimeter
G1 X99.919 Y105.626 E0.01548 ; perimeter
G1 X99.866 Y105.713 E0.00474 ; perimeter
G1 X99.568 Y105.956 E0.01778 ; perimeter
G1 X99.355 Y106.060 E0.01100 ; perimeter
G1 X99.065 Y106.294 E0.01725 ; perimeter
G1 X98.728 Y106.907 E0.03239 ; perimeter
G1 X98.690 Y107.022 E0.00561 ; perimeter
G1 X98.102 Y107.641 E0.03958 ; perimeter
G1 X97.838 Y107.823 E0.01485 ; perimeter
G1 X97.653 Y107.924 E0.00974 ; perimeter
G1 X97.284 Y108.312 E0.02480 ; perimeter
G1 X97.115 Y108.833 E0.02540 ; perimeter
G1 X97.053 Y108.957 E0.00643 ; perimeter
G1 X96.920 Y109.079 E0.00833 ; perimeter
G1 X96.871 Y109.089 E0.00233 ; perimeter
G1 X96.752 Y108.991 F10800.000 ; move inwards before travel
G1 X96.692 Y108.744 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.509849
G1 F2400.000
G1 X96.793 Y108.288 E0.01815 ; infill
G1 X96.975 Y107.736 E0.02255 ; infill
G1 X96.579 Y108.548 F10800.000 ; move to first infill point
;WIDTH:0.400866
G1 F2400.000
G1 X96.933 Y108.053 E0.01811 ; infill
G1 X97.147 Y107.831 E0.00917 ; infill
G1 X97.391 Y107.622 E0.00956 ; infill
;WIDTH:0.289289
G1 X97.845 Y107.341 E0.01093 ; infill
G1 X98.192 Y107.018 E0.00972 ; infill
;WIDTH:0.335363
G1 X98.261 Y106.911 E0.00308 ; infill
;WIDTH:0.378256
G1 X98.360 Y106.729 E0.00579 ; infill
;WIDTH:0.396957
G1 X98.611 Y106.208 E0.01703 ; infill
G1 X98.766 Y106.000 E0.00765 ; infill
;WIDTH:0.436536
G1 X98.951 Y105.825 E0.00833 ; infill
G1 X99.152 Y105.670 E0.00828 ; infill
;WIDTH:0.483034
G1 X99.381 Y105.513 E0.01018 ; infill
;WIDTH:0.509979
G1 X99.709 Y105.227 E0.01691 ; infill
G1 X101.151 Y103.952 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.061 Y103.836 E0.00678 ; perimeter
G1 X101.004 Y103.642 E0.00938 ; perimeter
G1 X101.015 Y103.505 E0.00636 ; perimeter
G1 X101.104 Y103.331 E0.00906 ; perimeter
G1 X101.547 Y102.955 E0.02689 ; perimeter
G1 X102.049 Y102.667 E0.02680 ; perimeter
G1 X102.228 Y102.606 E0.00878 ; perimeter
G1 X102.186 Y102.711 E0.00522 ; perimeter
G1 X102.075 Y102.860 E0.00861 ; perimeter
G1 X102.001 Y103.091 E0.01123 ; perimeter
G1 X101.987 Y103.400 E0.01431 ; perimeter
G1 X101.913 Y103.537 E0.00721 ; perimeter
G1 X101.895 Y103.830 E0.01360 ; perimeter
G1 X101.727 Y104.040 E0.01246 ; perimeter
G1 X101.518 Y104.114 E0.01027 ; perimeter
G1 X101.393 Y104.100 E0.00581 ; perimeter
G1 X101.204 Y103.979 E0.01040 ; perimeter
G1 X101.183 Y103.809 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.061 Y103.836 E-0.05334 ; wipe and retract
G1 X101.004 Y103.642 E-0.05346 ; wipe and retract
G1 X101.015 Y103.505 E-0.03622 ; wipe and retract
G1 X101.104 Y103.331 E-0.05163 ; wipe and retract
G1 X101.547 Y102.955 E-0.15321 ; wipe and retract
G1 X102.049 Y102.667 E-0.15267 ; wipe and retract
G1 X102.228 Y102.606 E-0.05002 ; wipe and retract
G1 X102.186 Y102.711 E-0.02974 ; wipe and retract
G1 X102.075 Y102.860 E-0.04907 ; wipe and retract
G1 X102.001 Y103.091 E-0.06400 ; wipe and retract
G1 X101.987 Y103.400 E-0.08154 ; wipe and retract
G1 X101.913 Y103.537 E-0.04108 ; wipe and retract
G1 X101.895 Y103.830 E-0.07749 ; wipe and retract
G1 X101.727 Y104.040 E-0.07099 ; wipe and retract
G1 X101.518 Y104.114 E-0.05853 ; wipe and retract
G1 X101.393 Y104.100 E-0.03309 ; wipe and retract
G1 X101.204 Y103.979 E-0.05927 ; wipe and retract
;WIPE_END
G1 E-1.28465 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X102.858 Y101.835 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.880 Y101.796 E0.00212 ; perimeter
G1 X102.950 Y101.331 E0.02175 ; perimeter
G1 X103.129 Y101.028 E0.01630 ; perimeter
G1 X103.406 Y100.779 E0.01727 ; perimeter
G1 X103.499 Y100.735 E0.00475 ; perimeter
G1 X103.719 Y100.685 E0.01047 ; perimeter
G1 X103.936 Y100.711 E0.01011 ; perimeter
G1 X104.054 Y100.765 E0.00602 ; perimeter
G1 X104.100 Y100.835 E0.00387 ; perimeter
G1 X104.082 Y101.004 E0.00787 ; perimeter
G1 X103.926 Y101.350 E0.01757 ; perimeter
G1 X103.761 Y101.533 E0.01140 ; perimeter
G1 X103.504 Y101.718 E0.01470 ; perimeter
G1 X103.402 Y101.762 E0.00512 ; perimeter
G1 X103.254 Y101.794 E0.00700 ; perimeter
G1 X102.991 Y101.799 E0.01218 ; perimeter
G1 X102.916 Y101.819 E0.00364 ; perimeter
G1 X102.892 Y101.805 F10800.000 ; move inwards before travel
G1 X103.165 Y101.524 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.255774
G1 F2400.000
G1 X103.295 Y101.430 E0.00285 ; infill
;WIDTH:0.280268
G1 X103.844 Y100.946 E0.01443 ; infill
G1 X103.782 Y100.935 F10800.000 ; move to first infill point
;WIDTH:0.324074
G1 F2400.000
G1 X103.494 Y101.235 E0.00973 ; infill
G1 X103.169 Y101.496 E0.00975 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.494 Y101.235 E-0.11001 ; wipe and retract
G1 X103.782 Y100.935 E-0.10981 ; wipe and retract
;WIPE_END
G1 E-2.18018 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X108.384 Y98.532 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.474 Y98.499 E0.00327 ; perimeter
G1 X108.500 Y98.506 E0.00090 ; perimeter
G1 X108.441 Y98.514 E0.00203 ; perimeter
G1 X108.145 Y99.065 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.864 Y99.291 E0.01670 ; perimeter
G1 X107.237 Y99.703 E0.03473 ; perimeter
G1 X106.696 Y99.918 E0.02697 ; perimeter
G1 X106.340 Y99.995 E0.01690 ; perimeter
G1 X105.909 Y99.916 E0.02028 ; perimeter
G1 X105.797 Y99.824 E0.00671 ; perimeter
G1 X105.858 Y99.624 E0.00967 ; perimeter
G1 X106.099 Y99.379 E0.01594 ; perimeter
G1 X106.401 Y99.166 E0.01712 ; perimeter
G1 X107.049 Y98.901 E0.03245 ; perimeter
G1 X107.469 Y98.573 E0.02468 ; perimeter
G1 X108.197 Y98.076 E0.04081 ; perimeter
G1 X108.458 Y98.003 E0.01257 ; perimeter
G1 X108.732 Y98.061 E0.01299 ; perimeter
G1 X108.796 Y98.124 E0.00415 ; perimeter
G1 X109.078 Y98.312 E0.01572 ; perimeter
G1 X109.217 Y98.509 E0.01117 ; perimeter
G1 X109.255 Y98.603 E0.00471 ; perimeter
G1 X109.259 Y98.808 E0.00949 ; perimeter
G1 X109.199 Y98.904 E0.00522 ; perimeter
G1 X109.131 Y98.950 E0.00382 ; perimeter
G1 X109.023 Y98.956 E0.00501 ; perimeter
G1 X108.809 Y99.010 E0.01022 ; perimeter
G1 X108.531 Y98.991 E0.01292 ; perimeter
G1 X108.323 Y99.057 E0.01007 ; perimeter
G1 X108.205 Y99.062 E0.00550 ; perimeter
G1 X107.834 Y98.882 F10800.000 ; move inwards before travel
G1 X108.245 Y98.799 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352004
G1 F2400.000
G1 X108.015 Y98.679 E0.00666 ; infill
G1 X107.261 Y99.226 E0.02395 ; infill
;WIDTH:0.334686
G1 X107.040 Y99.345 E0.00607 ; infill
G1 X106.596 Y99.523 E0.01161 ; infill
G1 X106.207 Y99.726 E0.01065 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.596 Y99.523 E-0.11584 ; wipe and retract
G1 X107.040 Y99.345 E-0.12626 ; wipe and retract
G1 X107.261 Y99.226 E-0.06606 ; wipe and retract
;WIPE_END
G1 E-2.09184 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X111.412 Y98.066 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.456 Y97.965 E0.00375 ; perimeter
G1 X111.562 Y98.013 E0.00393 ; perimeter
G1 X111.468 Y98.046 E0.00336 ; perimeter
G1 X113.316 Y98.521 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X113.435 Y98.505 E0.00404 ; perimeter
G1 X113.708 Y98.522 E0.00926 ; perimeter
G1 X113.810 Y98.458 E0.00409 ; perimeter
G1 X113.760 Y98.601 E0.00515 ; perimeter
G1 X113.773 Y98.751 E0.00508 ; perimeter
G1 X113.758 Y98.837 E0.00296 ; perimeter
G1 X113.531 Y98.623 E0.01055 ; perimeter
G1 X113.371 Y98.547 E0.00601 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.435 Y98.505 E-0.02022 ; wipe and retract
G1 X113.708 Y98.522 E-0.07221 ; wipe and retract
G1 X113.810 Y98.458 E-0.03192 ; wipe and retract
G1 X113.760 Y98.601 E-0.04013 ; wipe and retract
G1 X113.773 Y98.751 E-0.03959 ; wipe and retract
G1 X113.758 Y98.837 E-0.02305 ; wipe and retract
G1 X113.531 Y98.623 E-0.08227 ; wipe and retract
G1 X113.371 Y98.547 E-0.04685 ; wipe and retract
;WIPE_END
G1 E-2.04375 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X115.042 Y102.032 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.746 Y101.839 E0.01638 ; perimeter
G1 X114.564 Y101.662 E0.01176 ; perimeter
G1 X114.378 Y101.378 E0.01573 ; perimeter
G1 X114.228 Y100.988 E0.01934 ; perimeter
G1 X114.274 Y100.883 E0.00532 ; perimeter
G1 X114.306 Y100.610 E0.01272 ; perimeter
G1 X114.250 Y100.466 E0.00718 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.094 Y100.114 E0.01607 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.915 Y99.919 E0.01225 ; perimeter
G1 X113.716 Y99.573 E0.01847 ; perimeter
G1 X113.370 Y99.124 E0.02626 ; perimeter
G1 X113.263 Y99.029 E0.00665 ; perimeter
G1 X112.812 Y98.814 E0.02314 ; perimeter
G1 X112.092 Y98.567 E0.03526 ; perimeter
G1 X111.627 Y98.501 E0.02175 ; perimeter
G1 X111.281 Y98.624 E0.01699 ; perimeter
G1 X111.103 Y98.649 E0.00836 ; perimeter
G1 X110.963 Y98.629 E0.00655 ; perimeter
G1 X110.853 Y98.482 E0.00847 ; perimeter
G1 X110.853 Y98.139 E0.01588 ; perimeter
G1 X110.915 Y97.943 E0.00952 ; perimeter
G1 X110.973 Y97.866 E0.00450 ; perimeter
G1 X111.096 Y97.584 E0.01423 ; perimeter
G1 X111.101 Y97.527 E0.00266 ; perimeter
G1 X111.169 Y97.484 E0.00370 ; perimeter
G1 X111.490 Y97.460 E0.01493 ; perimeter
G1 X111.554 Y97.474 E0.00303 ; perimeter
G1 X111.711 Y97.554 E0.00817 ; perimeter
G1 X111.907 Y97.603 E0.00936 ; perimeter
G1 X112.165 Y97.748 E0.01369 ; perimeter
G1 X112.354 Y97.795 E0.00901 ; perimeter
G1 X112.950 Y98.036 E0.02980 ; perimeter
G1 X113.172 Y98.054 E0.01034 ; perimeter
G1 X113.418 Y98.021 E0.01148 ; perimeter
G1 X113.582 Y98.031 E0.00762 ; perimeter
G1 X113.837 Y97.869 E0.01399 ; perimeter
G1 X113.917 Y97.858 E0.00372 ; perimeter
G1 X114.073 Y97.767 E0.00837 ; perimeter
G1 X114.303 Y97.737 E0.01073 ; perimeter
G1 X114.403 Y97.839 E0.00663 ; perimeter
G1 X114.430 Y98.028 E0.00885 ; perimeter
G1 X114.370 Y98.313 E0.01349 ; perimeter
G1 X114.249 Y98.662 E0.01712 ; perimeter
G1 X114.259 Y98.773 E0.00516 ; perimeter
G1 X114.203 Y99.086 E0.01472 ; perimeter
G1 X114.209 Y99.453 E0.01698 ; perimeter
G1 X114.271 Y99.645 E0.00936 ; perimeter
G1 X114.276 Y99.821 E0.00817 ; perimeter
G1 X114.354 Y100.078 E0.01242 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.342 Y100.272 E0.00811 ; perimeter (bridge)
G1 X114.432 Y100.379 E0.00586 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.521 Y100.486 E0.00644 ; perimeter
G1 X114.726 Y100.623 E0.01142 ; perimeter
G1 X114.851 Y100.771 E0.00898 ; perimeter
G1 X114.991 Y100.901 E0.00884 ; perimeter
G1 X115.184 Y101.155 E0.01477 ; perimeter
G1 X115.282 Y101.416 E0.01295 ; perimeter
G1 X115.279 Y101.606 E0.00877 ; perimeter
G1 X115.318 Y102.024 E0.01948 ; perimeter
G1 X115.467 Y102.328 E0.01567 ; perimeter
G1 X115.646 Y102.504 E0.01164 ; perimeter
G1 X115.808 Y102.712 E0.01220 ; perimeter
G1 X115.879 Y102.944 E0.01123 ; perimeter
G1 X115.870 Y103.134 E0.00882 ; perimeter
G1 X115.772 Y103.374 E0.01202 ; perimeter
G1 X115.673 Y103.458 E0.00600 ; perimeter
G1 X115.560 Y103.488 E0.00543 ; perimeter
G1 X115.403 Y103.479 E0.00725 ; perimeter
G1 X115.307 Y103.434 E0.00494 ; perimeter
G1 X115.242 Y103.364 E0.00442 ; perimeter
G1 X115.187 Y103.231 E0.00667 ; perimeter
G1 X115.157 Y103.058 E0.00811 ; perimeter
G1 X115.142 Y102.840 E0.01012 ; perimeter
G1 X115.180 Y102.607 E0.01096 ; perimeter
G1 X115.144 Y102.318 E0.01348 ; perimeter
G1 X115.062 Y102.088 E0.01129 ; perimeter
G1 X115.149 Y101.694 F10800.000 ; move inwards before travel
G1 X115.028 Y101.735 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35023
G1 F2400.000
G1 X114.806 Y101.320 E0.01203 ; infill
;WIDTH:0.340957
G1 X114.525 Y100.816 E0.01431 ; infill
G1 X113.948 Y99.452 F10800.000 ; move to first infill point
;WIDTH:0.0972363
G1 F2400.000
G1 X113.941 Y99.322 E0.00059 ; infill
G1 X113.052 Y98.651 F10800.000 ; move to first infill point
;WIDTH:0.309373
G1 F2400.000
G1 X112.928 Y98.433 E0.00556 ; infill
G1 X112.227 Y98.183 E0.01647 ; infill
G1 X111.805 Y98.068 E0.00969 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.227 Y98.183 E-0.11547 ; wipe and retract
G1 X112.928 Y98.433 E-0.19621 ; wipe and retract
G1 X113.052 Y98.651 E-0.06620 ; wipe and retract
;WIPE_END
G1 E-2.02211 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 X115.414 Y102.668 ; move to first infill point
G1 Z6.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.257416
G1 F2400.000
G1 X115.493 Y102.875 E0.00397 ; infill
;WIDTH:0.281558
G1 X115.530 Y103.245 E0.00736 ; infill
G1 X115.566 Y103.233 F10800.000 ; move to first infill point
;WIDTH:0.147714
G1 F2400.000
G1 X115.530 Y103.192 E0.00047 ; infill
;WIDTH:0.178795
G1 X115.519 Y103.176 E0.00022 ; infill
;WIDTH:0.209875
G1 X115.509 Y103.160 E0.00027 ; infill
;WIDTH:0.227274
G1 X115.509 Y102.721 E0.00673 ; infill
;LAYER_CHANGE
;Z:6.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;6.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.509 Y103.160 E-0.11591 ; wipe and retract
;WIPE_END
G1 E-2.28409 F2400.000 ; retract
G1 Z6.075 F10800.000 ; lift Z
G1 Z6.200 ; move to next layer (30)
;AFTER_LAYER_CHANGE
;6.2
G1 Z6.275 ; lift Z
G1 X115.450 Y109.187 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.589 Y109.199 E0.00648 ; perimeter
G1 X115.661 Y109.279 E0.00495 ; perimeter
G1 X115.842 Y109.386 E0.00977 ; perimeter
G1 X115.890 Y109.494 E0.00550 ; perimeter
G1 X115.906 Y109.768 E0.01268 ; perimeter
G1 X115.872 Y109.950 E0.00861 ; perimeter
G1 X115.817 Y110.036 E0.00473 ; perimeter
G1 X115.689 Y110.160 E0.00826 ; perimeter
G1 X115.554 Y110.184 E0.00635 ; perimeter
G1 X115.275 Y110.130 E0.01314 ; perimeter
G1 X115.135 Y109.923 E0.01159 ; perimeter
G1 X115.111 Y109.550 E0.01733 ; perimeter
G1 X115.158 Y109.414 E0.00665 ; perimeter
G1 X115.243 Y109.289 E0.00700 ; perimeter
G1 X115.396 Y109.214 E0.00791 ; perimeter
G1 X115.538 Y109.295 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.589 Y109.199 E-0.05112 ; wipe and retract
G1 X115.661 Y109.279 E-0.02822 ; wipe and retract
G1 X115.842 Y109.386 E-0.05569 ; wipe and retract
G1 X115.890 Y109.494 E-0.03131 ; wipe and retract
G1 X115.906 Y109.768 E-0.07226 ; wipe and retract
G1 X115.872 Y109.950 E-0.04905 ; wipe and retract
G1 X115.817 Y110.036 E-0.02694 ; wipe and retract
G1 X115.689 Y110.160 E-0.04704 ; wipe and retract
G1 X115.554 Y110.184 E-0.03617 ; wipe and retract
G1 X115.275 Y110.130 E-0.07488 ; wipe and retract
G1 X115.135 Y109.923 E-0.06603 ; wipe and retract
G1 X115.111 Y109.550 E-0.09873 ; wipe and retract
G1 X115.158 Y109.414 E-0.03790 ; wipe and retract
G1 X115.243 Y109.289 E-0.03986 ; wipe and retract
G1 X115.396 Y109.214 E-0.04508 ; wipe and retract
;WIPE_END
G1 E-1.63972 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X115.187 Y114.974 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.286 Y115.006 E0.00484 ; perimeter
G1 X115.346 Y115.054 E0.00354 ; perimeter
G1 X115.450 Y115.218 E0.00900 ; perimeter
G1 X115.486 Y115.317 E0.00491 ; perimeter
G1 X115.470 Y115.427 E0.00513 ; perimeter
G1 X115.422 Y115.540 E0.00568 ; perimeter
G1 X115.324 Y115.678 E0.00786 ; perimeter
G1 X115.238 Y115.746 E0.00506 ; perimeter
G1 X115.059 Y115.778 E0.00842 ; perimeter
G1 X114.881 Y115.725 E0.00862 ; perimeter
G1 X114.752 Y115.624 E0.00759 ; perimeter
G1 X114.674 Y115.418 E0.01020 ; perimeter
G1 X114.671 Y115.339 E0.00369 ; perimeter
G1 X114.703 Y115.174 E0.00779 ; perimeter
G1 X114.752 Y115.089 E0.00450 ; perimeter
G1 X114.821 Y115.025 E0.00438 ; perimeter
G1 X114.896 Y114.988 E0.00388 ; perimeter
G1 X115.127 Y114.972 E0.01072 ; perimeter
G1 X115.224 Y115.072 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.286 Y115.006 E-0.04303 ; wipe and retract
G1 X115.346 Y115.054 E-0.02019 ; wipe and retract
G1 X115.450 Y115.218 E-0.05126 ; wipe and retract
G1 X115.486 Y115.317 E-0.02795 ; wipe and retract
G1 X115.470 Y115.427 E-0.02921 ; wipe and retract
G1 X115.422 Y115.540 E-0.03236 ; wipe and retract
G1 X115.324 Y115.678 E-0.04476 ; wipe and retract
G1 X115.238 Y115.746 E-0.02880 ; wipe and retract
G1 X115.059 Y115.778 E-0.04797 ; wipe and retract
G1 X114.881 Y115.725 E-0.04909 ; wipe and retract
G1 X114.752 Y115.624 E-0.04327 ; wipe and retract
G1 X114.674 Y115.418 E-0.05809 ; wipe and retract
G1 X114.671 Y115.339 E-0.02100 ; wipe and retract
G1 X114.703 Y115.174 E-0.04437 ; wipe and retract
G1 X114.752 Y115.089 E-0.02564 ; wipe and retract
G1 X114.821 Y115.025 E-0.02496 ; wipe and retract
G1 X114.896 Y114.988 E-0.02210 ; wipe and retract
G1 X115.127 Y114.972 E-0.06106 ; wipe and retract
;WIPE_END
G1 E-1.72489 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X106.882 Y115.491 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.003 Y115.577 E0.00689 ; perimeter
G1 X107.087 Y115.689 E0.00648 ; perimeter
G1 X107.077 Y115.872 E0.00848 ; perimeter
G1 X107.036 Y115.938 E0.00359 ; perimeter
G1 X106.919 Y116.047 E0.00743 ; perimeter
G1 X106.738 Y116.123 E0.00909 ; perimeter
G1 X106.394 Y116.186 E0.01617 ; perimeter
G1 X106.036 Y116.167 E0.01664 ; perimeter
G1 X105.758 Y116.076 E0.01353 ; perimeter
G1 X105.584 Y115.926 E0.01065 ; perimeter
G1 X105.549 Y115.858 E0.00353 ; perimeter
G1 X105.554 Y115.682 E0.00815 ; perimeter
G1 X105.611 Y115.597 E0.00474 ; perimeter
G1 X105.662 Y115.545 E0.00341 ; perimeter
G1 X105.819 Y115.465 E0.00816 ; perimeter
G1 X106.125 Y115.390 E0.01456 ; perimeter
G1 X106.515 Y115.390 E0.01808 ; perimeter
G1 X106.825 Y115.475 E0.01488 ; perimeter
G1 X106.892 Y115.639 F10800.000 ; move inwards before travel
G1 X106.820 Y115.743 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352195
G1 F2400.000
G1 X106.369 Y115.789 E0.01166 ; infill
G1 X106.147 Y115.785 E0.00571 ; infill
;WIDTH:0.335461
G1 X106.140 Y115.785 E0.00017 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.147 Y115.785 E-0.00182 ; wipe and retract
;WIPE_END
G1 E-2.39818 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X95.423 Y114.362 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.200 Y114.473 E0.01153 ; perimeter
G1 X94.904 Y114.500 E0.01379 ; perimeter
G1 X94.701 Y114.494 E0.00939 ; perimeter
G1 X94.560 Y114.383 E0.00834 ; perimeter
G1 X94.462 Y114.163 E0.01116 ; perimeter
G1 X94.454 Y114.048 E0.00530 ; perimeter
G1 X94.505 Y113.867 E0.00870 ; perimeter
G1 X94.540 Y113.631 E0.01108 ; perimeter
G1 X94.680 Y113.417 E0.01185 ; perimeter
G1 X94.786 Y113.055 E0.01745 ; perimeter
G1 X94.706 Y112.877 E0.00908 ; perimeter
G1 X94.683 Y112.686 E0.00890 ; perimeter
G1 X94.500 Y112.386 E0.01628 ; perimeter
G1 X94.440 Y112.100 E0.01356 ; perimeter
G1 X94.447 Y111.844 E0.01185 ; perimeter
G1 X94.488 Y111.703 E0.00680 ; perimeter
G1 X94.633 Y111.483 E0.01220 ; perimeter
G1 X94.824 Y111.349 E0.01081 ; perimeter
G1 X94.910 Y111.334 E0.00404 ; perimeter
G1 X95.394 Y111.155 E0.02389 ; perimeter
G1 X95.517 Y111.211 E0.00627 ; perimeter
G1 X95.512 Y111.423 E0.00979 ; perimeter
G1 X95.475 Y111.581 E0.00753 ; perimeter
G1 X95.389 Y111.752 E0.00885 ; perimeter
G1 X95.170 Y112.850 E0.05188 ; perimeter
G1 X95.173 Y113.203 E0.01634 ; perimeter
G1 X95.282 Y113.622 E0.02006 ; perimeter
G1 X95.412 Y114.303 E0.03211 ; perimeter
G1 X95.177 Y114.326 F10800.000 ; move inwards before travel
G1 X96.785 Y115.382 ; move to first perimeter point
G1 F1800.000
G1 X97.023 Y115.372 E0.01104 ; perimeter
G1 X97.419 Y115.467 E0.01886 ; perimeter
G1 X97.792 Y115.359 E0.01798 ; perimeter
G1 X97.960 Y115.361 E0.00776 ; perimeter
G1 X98.152 Y115.302 E0.00933 ; perimeter
G1 X98.339 Y115.318 E0.00868 ; perimeter
G1 X98.642 Y115.312 E0.01403 ; perimeter
G1 X99.106 Y115.437 E0.02228 ; perimeter
G1 X99.697 Y115.526 E0.02767 ; perimeter
G1 X100.213 Y115.677 E0.02491 ; perimeter
G1 X100.392 Y115.801 E0.01009 ; perimeter
G1 X100.125 Y115.952 E0.01419 ; perimeter
G1 X99.676 Y116.072 E0.02156 ; perimeter
G1 X98.759 Y116.162 E0.04265 ; perimeter
G1 X98.097 Y116.174 E0.03067 ; perimeter
G1 X97.645 Y116.141 E0.02100 ; perimeter
G1 X97.342 Y116.058 E0.01455 ; perimeter
G1 X97.163 Y116.044 E0.00834 ; perimeter
G1 X96.066 Y115.769 E0.05238 ; perimeter
G1 X95.904 Y115.655 E0.00918 ; perimeter
G1 X95.760 Y115.450 E0.01159 ; perimeter
G1 X95.755 Y115.288 E0.00750 ; perimeter
G1 X95.719 Y115.177 E0.00542 ; perimeter
G1 X95.743 Y114.939 E0.01107 ; perimeter
G1 X95.683 Y114.820 E0.00617 ; perimeter
G1 X95.703 Y114.741 E0.00376 ; perimeter
G1 X96.227 Y114.846 E0.02477 ; perimeter
G1 X96.420 Y114.965 E0.01050 ; perimeter
G1 X96.549 Y115.110 E0.00899 ; perimeter
G1 X96.721 Y115.230 E0.00972 ; perimeter
G1 X96.762 Y115.326 E0.00485 ; perimeter
G1 X96.847 Y115.612 F10800.000 ; move inwards before travel
G1 X96.619 Y115.659 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316184
G1 F2400.000
G1 X96.415 Y115.477 E0.00620 ; infill
G1 X96.263 Y115.402 E0.00385 ; infill
G1 X96.197 Y115.346 E0.00197 ; infill
G1 X96.115 Y115.208 E0.00365 ; infill
;WIDTH:0.295304
G1 X95.986 Y115.043 E0.00439 ; infill
G1 X94.888 Y114.259 F10800.000 ; move to first infill point
;WIDTH:0.164381
G1 F2400.000
G1 X94.966 Y113.404 E0.00867 ; infill
G1 X94.784 Y111.692 F10800.000 ; move to first infill point
;WIDTH:0.36722
G1 F2400.000
G1 X94.883 Y112.252 E0.01533 ; infill
;WIDTH:0.35523
G1 X94.952 Y112.638 E0.01019 ; infill
G1 X94.833 Y112.469 F10800.000 ; move to first infill point
;WIDTH:0.461036
G1 F2400.000
G1 X94.896 Y111.914 E0.01943 ; infill
G1 X95.048 Y111.539 E0.01409 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.896 Y111.914 E-0.10693 ; wipe and retract
G1 X94.833 Y112.469 E-0.14746 ; wipe and retract
;WIPE_END
G1 E-2.14560 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X97.310 Y115.814 ; move to first infill point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.356027
G1 F2400.000
G1 X98.198 Y115.740 E0.02320 ; infill
G1 X98.546 Y115.740 E0.00905 ; infill
G1 X98.885 Y115.772 E0.00888 ; infill
;WIDTH:0.314337
G1 X99.035 Y115.782 E0.00337 ; infill
;WIDTH:0.264988
G1 X99.238 Y115.787 E0.00375 ; infill
;WIDTH:0.214404
G1 X99.432 Y115.792 E0.00277 ; infill
;WIDTH:0.166526
G1 X99.626 Y115.797 E0.00199 ; infill
;WIDTH:0.118648
G1 X99.696 Y115.797 E0.00044 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.626 Y115.797 E-0.01847 ; wipe and retract
;WIPE_END
G1 E-2.38153 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X96.675 Y109.260 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.553 Y109.110 E0.00894 ; perimeter
G1 X96.404 Y108.787 E0.01649 ; perimeter
G1 X96.357 Y108.599 E0.00894 ; perimeter
G1 X96.380 Y108.314 E0.01328 ; perimeter
G1 X96.442 Y108.163 E0.00751 ; perimeter
G1 X96.718 Y107.812 E0.02070 ; perimeter
G1 X96.860 Y107.670 E0.00931 ; perimeter
G1 X96.891 Y107.607 E0.00327 ; perimeter
G1 X97.102 Y107.396 E0.01381 ; perimeter
G1 X97.308 Y107.223 E0.01247 ; perimeter
G1 X97.525 Y107.075 E0.01217 ; perimeter
G1 X97.885 Y106.753 E0.02235 ; perimeter
G1 X98.098 Y106.424 E0.01818 ; perimeter
G1 X98.201 Y106.184 E0.01211 ; perimeter
G1 X98.845 Y105.447 E0.04532 ; perimeter
G1 X99.102 Y105.202 E0.01648 ; perimeter
G1 X99.330 Y105.006 E0.01394 ; perimeter
G1 X99.444 Y104.948 E0.00590 ; perimeter
G1 X99.612 Y104.930 E0.00782 ; perimeter
G1 X99.844 Y105.007 E0.01133 ; perimeter
G1 X99.938 Y105.121 E0.00683 ; perimeter
G1 X100.043 Y105.436 E0.01539 ; perimeter
G1 X100.025 Y105.596 E0.00747 ; perimeter
G1 X99.941 Y105.765 E0.00871 ; perimeter
G1 X99.675 Y105.964 E0.01539 ; perimeter
G1 X99.529 Y106.004 E0.00704 ; perimeter
G1 X99.180 Y106.203 E0.01859 ; perimeter
G1 X98.864 Y106.688 E0.02680 ; perimeter
G1 X98.858 Y106.842 E0.00715 ; perimeter
G1 X98.795 Y107.092 E0.01196 ; perimeter
G1 X98.746 Y107.177 E0.00455 ; perimeter
G1 X98.628 Y107.307 E0.00810 ; perimeter
G1 X98.406 Y107.485 E0.01320 ; perimeter
G1 X98.206 Y107.613 E0.01100 ; perimeter
G1 X97.634 Y107.924 E0.03019 ; perimeter
G1 X97.365 Y108.156 E0.01640 ; perimeter
G1 X97.241 Y108.372 E0.01158 ; perimeter
G1 X97.265 Y108.570 E0.00924 ; perimeter
G1 X97.161 Y108.944 E0.01795 ; perimeter
G1 X97.164 Y108.993 E0.00227 ; perimeter
G1 X97.112 Y109.117 E0.00622 ; perimeter
G1 X96.920 Y109.300 E0.01231 ; perimeter
G1 X96.765 Y109.330 E0.00731 ; perimeter
G1 X96.722 Y109.297 E0.00251 ; perimeter
G1 X96.698 Y109.068 F10800.000 ; move inwards before travel
G1 X96.806 Y108.531 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.38218
G1 F2400.000
G1 X96.813 Y108.380 E0.00428 ; infill
G1 X96.866 Y108.249 E0.00397 ; infill
;WIDTH:0.261994
G1 X97.137 Y107.890 E0.00820 ; infill
;WIDTH:0.271031
G1 X97.162 Y107.862 E0.00071 ; infill
;WIDTH:0.291643
G1 X97.193 Y107.822 E0.00105 ; infill
;WIDTH:0.310109
G1 X97.432 Y107.608 E0.00712 ; infill
;WIDTH:0.337045
G1 X97.542 Y107.532 E0.00327 ; infill
;WIDTH:0.36641
G1 X97.781 Y107.386 E0.00754 ; infill
;WIDTH:0.395348
G1 X97.884 Y107.313 E0.00368 ; infill
;WIDTH:0.424287
G1 X97.987 Y107.241 E0.00399 ; infill
;WIDTH:0.460653
G1 X98.208 Y107.067 E0.00977 ; infill
;WIDTH:0.471007
G1 X98.249 Y107.028 E0.00200 ; infill
;WIDTH:0.497937
G1 X98.306 Y106.965 E0.00323 ; infill
;WIDTH:0.510396
G1 X98.408 Y106.778 E0.00829 ; infill
G1 X98.275 Y107.282 F10800.000 ; move to first infill point
;WIDTH:0.312537
G1 F2400.000
G1 X98.492 Y106.524 E0.01767 ; infill
G1 X98.555 Y106.406 E0.00301 ; infill
G1 X98.943 Y105.905 E0.01420 ; infill
;WIDTH:0.356601
G1 X99.046 Y105.822 E0.00345 ; infill
;WIDTH:0.400665
G1 X99.148 Y105.738 E0.00394 ; infill
;WIDTH:0.428633
G1 X99.241 Y105.669 E0.00370 ; infill
;WIDTH:0.4566
G1 X99.333 Y105.600 E0.00397 ; infill
;WIDTH:0.476466
G1 X99.379 Y105.571 E0.00195 ; infill
;WIDTH:0.497819
G1 X99.417 Y105.549 E0.00165 ; infill
;WIDTH:0.526063
G1 X99.741 Y105.300 E0.01645 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.417 Y105.549 E-0.10807 ; wipe and retract
;WIPE_END
G1 E-2.29193 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X101.421 Y104.166 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.247 Y104.041 E0.00995 ; perimeter
G1 X101.132 Y103.839 E0.01076 ; perimeter
G1 X101.087 Y103.700 E0.00677 ; perimeter
G1 X101.119 Y103.513 E0.00880 ; perimeter
G1 X101.225 Y103.336 E0.00956 ; perimeter
G1 X101.399 Y103.193 E0.01040 ; perimeter
G1 X101.826 Y103.091 E0.02034 ; perimeter
G1 X101.909 Y103.194 E0.00614 ; perimeter
G1 X101.916 Y103.491 E0.01377 ; perimeter
G1 X101.968 Y103.595 E0.00539 ; perimeter
G1 X101.965 Y103.781 E0.00859 ; perimeter
G1 X101.923 Y103.935 E0.00743 ; perimeter
G1 X101.760 Y104.139 E0.01209 ; perimeter
G1 X101.598 Y104.208 E0.00819 ; perimeter
G1 X101.481 Y104.174 E0.00565 ; perimeter
G1 X101.392 Y103.953 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.247 Y104.041 E-0.07100 ; wipe and retract
G1 X101.132 Y103.839 E-0.06132 ; wipe and retract
G1 X101.087 Y103.700 E-0.03858 ; wipe and retract
G1 X101.119 Y103.513 E-0.05013 ; wipe and retract
G1 X101.225 Y103.336 E-0.05444 ; wipe and retract
G1 X101.399 Y103.193 E-0.05924 ; wipe and retract
G1 X101.826 Y103.091 E-0.11588 ; wipe and retract
G1 X101.909 Y103.194 E-0.03500 ; wipe and retract
G1 X101.916 Y103.491 E-0.07842 ; wipe and retract
G1 X101.968 Y103.595 E-0.03073 ; wipe and retract
G1 X101.965 Y103.781 E-0.04896 ; wipe and retract
G1 X101.923 Y103.935 E-0.04230 ; wipe and retract
G1 X101.760 Y104.139 E-0.06886 ; wipe and retract
G1 X101.598 Y104.208 E-0.04666 ; wipe and retract
G1 X101.481 Y104.174 E-0.03217 ; wipe and retract
;WIPE_END
G1 E-1.56630 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X103.086 Y101.601 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.051 Y101.473 E0.00611 ; perimeter
G1 X103.087 Y101.194 E0.01306 ; perimeter
G1 X103.228 Y100.924 E0.01408 ; perimeter
G1 X103.448 Y100.712 E0.01416 ; perimeter
G1 X103.688 Y100.603 E0.01222 ; perimeter
G1 X103.885 Y100.563 E0.00930 ; perimeter
G1 X104.125 Y100.558 E0.01113 ; perimeter
G1 X104.280 Y100.644 E0.00821 ; perimeter
G1 X104.263 Y100.758 E0.00534 ; perimeter
G1 X104.078 Y101.179 E0.02131 ; perimeter
G1 X103.810 Y101.466 E0.01823 ; perimeter
G1 X103.602 Y101.595 E0.01129 ; perimeter
G1 X103.283 Y101.651 E0.01502 ; perimeter
G1 X103.144 Y101.615 E0.00665 ; perimeter
G1 X103.130 Y101.476 F10800.000 ; move inwards before travel
G1 X103.927 Y100.803 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301427
G1 F2400.000
G1 X103.761 Y100.976 E0.00516 ; infill
G1 X103.310 Y101.349 E0.01257 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.761 Y100.976 E-0.15431 ; wipe and retract
G1 X103.927 Y100.803 E-0.06339 ; wipe and retract
;WIPE_END
G1 E-2.18230 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X108.102 Y99.024 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.722 Y99.312 E0.02208 ; perimeter
G1 X107.518 Y99.501 E0.01290 ; perimeter
G1 X107.196 Y99.717 E0.01796 ; perimeter
G1 X106.822 Y99.870 E0.01874 ; perimeter
G1 X106.519 Y99.939 E0.01440 ; perimeter
G1 X105.964 Y99.889 E0.02578 ; perimeter
G1 X105.898 Y99.813 E0.00468 ; perimeter
G1 X105.993 Y99.558 E0.01263 ; perimeter
G1 X106.043 Y99.487 E0.00400 ; perimeter
G1 X106.214 Y99.308 E0.01151 ; perimeter
G1 X106.388 Y99.185 E0.00984 ; perimeter
G1 X107.097 Y98.908 E0.03527 ; perimeter
G1 X107.194 Y98.830 E0.00576 ; perimeter
G1 X107.342 Y98.777 E0.00728 ; perimeter
G1 X108.062 Y98.315 E0.03961 ; perimeter
G1 X108.288 Y98.195 E0.01187 ; perimeter
G1 X108.528 Y98.125 E0.01159 ; perimeter
G1 X108.907 Y98.181 E0.01774 ; perimeter
G1 X109.174 Y98.344 E0.01447 ; perimeter
G1 X109.323 Y98.498 E0.00992 ; perimeter
G1 X109.418 Y98.658 E0.00864 ; perimeter
G1 X109.447 Y98.920 E0.01223 ; perimeter
G1 X109.429 Y98.966 E0.00229 ; perimeter
G1 X109.307 Y99.051 E0.00688 ; perimeter
G1 X108.963 Y99.079 E0.01603 ; perimeter
G1 X108.577 Y99.017 E0.01809 ; perimeter
G1 X108.162 Y99.023 E0.01922 ; perimeter
G1 X107.780 Y98.786 F10800.000 ; move inwards before travel
G1 X107.961 Y98.666 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.402339
G1 F2400.000
G1 X108.591 Y98.581 E0.01900 ; infill
G1 X108.759 Y98.603 E0.00506 ; infill
G1 X109.187 Y98.761 E0.01364 ; infill
G1 X108.680 Y98.395 F10800.000 ; move to first infill point
;WIDTH:0.184504
G1 F2400.000
G1 X107.980 Y98.732 E0.00914 ; infill
G1 X107.481 Y99.081 E0.00717 ; infill
G1 X107.843 Y98.742 F10800.000 ; move to first infill point
;WIDTH:0.285829
G1 F2400.000
G1 X107.264 Y99.234 E0.01535 ; infill
G1 X107.009 Y99.366 E0.00580 ; infill
G1 X106.268 Y99.665 E0.01613 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.009 Y99.366 E-0.21079 ; wipe and retract
G1 X107.264 Y99.234 E-0.07580 ; wipe and retract
G1 X107.843 Y98.742 E-0.20049 ; wipe and retract
;WIPE_END
G1 E-1.91292 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X113.315 Y98.555 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.746 Y98.581 E0.01463 ; perimeter
G1 X113.769 Y98.936 E0.01202 ; perimeter
G1 X113.626 Y98.772 E0.00737 ; perimeter
G1 X113.364 Y98.590 E0.01078 ; perimeter
G1 X111.715 Y98.496 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.468 Y98.639 E0.01326 ; perimeter
G1 X111.387 Y98.661 E0.00388 ; perimeter
G1 X111.189 Y98.808 E0.01142 ; perimeter
G1 X111.106 Y98.816 E0.00388 ; perimeter
G1 X110.863 Y98.782 E0.01133 ; perimeter
G1 X110.739 Y98.608 E0.00989 ; perimeter
G1 X110.746 Y98.419 E0.00878 ; perimeter
G1 X110.858 Y98.041 E0.01823 ; perimeter
G1 X111.099 Y97.718 E0.01868 ; perimeter
G1 X111.196 Y97.640 E0.00577 ; perimeter
G1 X111.234 Y97.623 E0.00194 ; perimeter
G1 X111.729 Y97.665 E0.02300 ; perimeter
G1 X113.023 Y98.055 E0.06259 ; perimeter
G1 X113.627 Y98.091 E0.02802 ; perimeter
G1 X113.736 Y98.022 E0.00600 ; perimeter
G1 X113.982 Y97.986 E0.01149 ; perimeter
G1 X114.075 Y97.946 E0.00472 ; perimeter
G1 X114.151 Y97.947 E0.00351 ; perimeter
G1 X114.253 Y98.034 E0.00624 ; perimeter
G1 X114.290 Y98.280 E0.01152 ; perimeter
G1 X114.226 Y98.523 E0.01165 ; perimeter
G1 X114.277 Y99.328 E0.03734 ; perimeter
G1 X114.570 Y100.282 E0.04623 ; perimeter
G1 X114.717 Y100.443 E0.01009 ; perimeter
G1 X115.038 Y100.917 E0.02653 ; perimeter
G1 X115.182 Y101.298 E0.01885 ; perimeter
G1 X115.197 Y101.403 E0.00492 ; perimeter
G1 X115.161 Y101.734 E0.01545 ; perimeter
G1 X115.096 Y101.858 E0.00648 ; perimeter
G1 X114.974 Y101.825 E0.00583 ; perimeter
G1 X114.676 Y101.678 E0.01539 ; perimeter
G1 X114.429 Y101.479 E0.01469 ; perimeter
G1 X114.274 Y101.290 E0.01132 ; perimeter
G1 X114.138 Y101.056 E0.01254 ; perimeter
G1 X114.030 Y100.768 E0.01428 ; perimeter
G1 X113.898 Y100.267 E0.02400 ; perimeter
G1 X113.791 Y99.960 E0.01505 ; perimeter
G1 X113.477 Y99.334 E0.03245 ; perimeter
G1 X113.302 Y99.134 E0.01230 ; perimeter
G1 X112.863 Y98.828 E0.02480 ; perimeter
G1 X112.204 Y98.573 E0.03272 ; perimeter
G1 X111.775 Y98.505 E0.02011 ; perimeter
G1 X111.514 Y98.292 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.468 Y98.639 E-0.08842 ; wipe and retract
G1 X111.387 Y98.661 E-0.02212 ; wipe and retract
G1 X111.189 Y98.808 E-0.06503 ; wipe and retract
G1 X111.106 Y98.816 E-0.02212 ; wipe and retract
G1 X110.863 Y98.782 E-0.06455 ; wipe and retract
G1 X110.739 Y98.608 E-0.05635 ; wipe and retract
G1 X110.746 Y98.419 E-0.05003 ; wipe and retract
G1 X110.858 Y98.041 E-0.10387 ; wipe and retract
G1 X111.099 Y97.718 E-0.10639 ; wipe and retract
G1 X111.196 Y97.640 E-0.03289 ; wipe and retract
G1 X111.234 Y97.623 E-0.01107 ; wipe and retract
G1 X111.729 Y97.665 E-0.13105 ; wipe and retract
G1 X113.023 Y98.055 E-0.35655 ; wipe and retract
G1 X113.627 Y98.091 E-0.15963 ; wipe and retract
G1 X113.736 Y98.022 E-0.03417 ; wipe and retract
G1 X113.982 Y97.986 E-0.06546 ; wipe and retract
G1 X114.075 Y97.946 E-0.02688 ; wipe and retract
G1 X114.151 Y97.947 E-0.01998 ; wipe and retract
G1 X114.253 Y98.034 E-0.03556 ; wipe and retract
G1 X114.290 Y98.280 E-0.06565 ; wipe and retract
G1 X114.226 Y98.523 E-0.06637 ; wipe and retract
G1 X114.277 Y99.328 E-0.21271 ; wipe and retract
G1 X114.570 Y100.282 E-0.26339 ; wipe and retract
G1 X114.717 Y100.443 E-0.05748 ; wipe and retract
G1 X115.038 Y100.917 E-0.15116 ; wipe and retract
G1 X115.053 Y100.957 E-0.01111 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 X115.327 Y102.491 ; move to first perimeter point
G1 Z6.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.481 Y102.622 E0.00939 ; perimeter
G1 X115.713 Y102.695 E0.01127 ; perimeter
G1 X115.781 Y102.767 E0.00457 ; perimeter
G1 X115.878 Y103.051 E0.01390 ; perimeter
G1 X115.874 Y103.208 E0.00729 ; perimeter
G1 X115.793 Y103.433 E0.01110 ; perimeter
G1 X115.671 Y103.551 E0.00784 ; perimeter
G1 X115.571 Y103.580 E0.00482 ; perimeter
G1 X115.422 Y103.576 E0.00692 ; perimeter
G1 X115.306 Y103.527 E0.00586 ; perimeter
G1 X115.244 Y103.459 E0.00426 ; perimeter
G1 X115.189 Y103.294 E0.00803 ; perimeter
G1 X115.164 Y102.951 E0.01593 ; perimeter
G1 X115.214 Y102.772 E0.00863 ; perimeter
G1 X115.345 Y102.579 E0.01078 ; perimeter
G1 X115.339 Y102.549 E0.00143 ; perimeter
G1 X115.415 Y102.673 F10800.000 ; move inwards before travel
G1 X115.499 Y102.881 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.239013
G1 F2400.000
G1 X115.503 Y103.001 E0.00195 ; infill
;WIDTH:0.256414
G1 X115.510 Y103.050 E0.00089 ; infill
;WIDTH:0.263789
G1 X115.546 Y103.337 E0.00531 ; infill
G1 X114.903 Y101.521 F10800.000 ; move to first infill point
;WIDTH:0.393938
G1 F2400.000
G1 X114.462 Y100.781 E0.02514 ; infill
;WIDTH:0.36183
G1 X114.412 Y100.683 E0.00291 ; infill
;WIDTH:0.335948
G1 X114.140 Y100.240 E0.01268 ; infill
G1 X114.290 Y100.465 F10800.000 ; move to first infill point
;WIDTH:0.219224
G1 F2400.000
G1 X114.276 Y100.429 E0.00056 ; infill
;WIDTH:0.209123
G1 X114.204 Y100.176 E0.00363 ; infill
;WIDTH:0.198704
G1 X114.090 Y99.828 E0.00475 ; infill
G1 X113.921 Y99.407 E0.00586 ; infill
;WIDTH:0.29692
G1 X113.841 Y99.167 E0.00536 ; infill
G1 X113.142 Y98.320 F10800.000 ; move to first infill point
;WIDTH:0.343017
G1 F2400.000
G1 X112.942 Y98.439 E0.00581 ; infill
G1 X112.624 Y98.330 E0.00837 ; infill
;WIDTH:0.317588
G1 X112.312 Y98.223 E0.00755 ; infill
;WIDTH:0.293376
G1 X111.666 Y98.075 E0.01378 ; infill
;WIDTH:0.407499
G1 X111.060 Y98.208 E0.01882 ; infill
G1 X110.992 Y98.547 F10800.000 ; move to first infill point
;WIDTH:0.377865
G1 F2400.000
G1 X111.112 Y98.406 E0.00516 ; infill
;WIDTH:0.405838
G1 X111.232 Y98.265 E0.00559 ; infill
;WIDTH:0.439259
G1 X111.257 Y98.241 E0.00113 ; infill
;WIDTH:0.467359
G1 X111.733 Y97.918 E0.02030 ; infill
;LAYER_CHANGE
;Z:6.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;6.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.257 Y98.241 E-0.15180 ; wipe and retract
;WIPE_END
G1 E-2.24820 F2400.000 ; retract
G1 Z6.275 F10800.000 ; lift Z
G1 Z6.400 ; move to next layer (31)
;AFTER_LAYER_CHANGE
;6.4
G1 Z6.475 ; lift Z
G1 X107.152 Y116.050 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.984 Y116.121 E0.00842 ; perimeter
G1 X106.669 Y116.183 E0.01486 ; perimeter
G1 X106.272 Y116.164 E0.01845 ; perimeter
G1 X105.961 Y116.060 E0.01516 ; perimeter
G1 X105.882 Y116.002 E0.00455 ; perimeter
G1 X105.795 Y115.890 E0.00656 ; perimeter
G1 X105.774 Y115.774 E0.00548 ; perimeter
G1 X105.800 Y115.653 E0.00573 ; perimeter
G1 X105.905 Y115.533 E0.00738 ; perimeter
G1 X106.179 Y115.418 E0.01376 ; perimeter
G1 X106.326 Y115.386 E0.00698 ; perimeter
G1 X106.729 Y115.386 E0.01864 ; perimeter
G1 X107.131 Y115.494 E0.01932 ; perimeter
G1 X107.199 Y115.541 E0.00379 ; perimeter
G1 X107.328 Y115.692 E0.00922 ; perimeter
G1 X107.338 Y115.824 E0.00615 ; perimeter
G1 X107.259 Y115.956 E0.00711 ; perimeter
G1 X107.197 Y116.010 E0.00385 ; perimeter
G1 X106.991 Y115.965 F10800.000 ; move inwards before travel
G1 X107.054 Y115.743 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.355962
G1 F2400.000
G1 X106.640 Y115.783 E0.01084 ; infill
G1 X106.369 Y115.777 E0.00707 ; infill
;WIDTH:0.343009
G1 X106.023 Y115.762 E0.00863 ; infill
G1 X106.351 Y115.927 F10800.000 ; move to first infill point
;WIDTH:0.190045
G1 F2400.000
G1 X106.995 Y115.777 E0.00809 ; infill
;WIDTH:0.177323
G1 X107.014 Y115.748 E0.00038 ; infill
;WIDTH:0.141221
G1 X107.032 Y115.719 E0.00028 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.014 Y115.748 E-0.00909 ; wipe and retract
;WIPE_END
G1 E-2.39091 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X114.671 Y115.344 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.698 Y115.174 E0.00797 ; perimeter
G1 X114.745 Y115.092 E0.00438 ; perimeter
G1 X114.819 Y115.023 E0.00470 ; perimeter
G1 X114.902 Y114.982 E0.00429 ; perimeter
G1 X115.044 Y114.965 E0.00664 ; perimeter
G1 X115.188 Y114.969 E0.00665 ; perimeter
G1 X115.288 Y115.002 E0.00490 ; perimeter
G1 X115.348 Y115.050 E0.00356 ; perimeter
G1 X115.452 Y115.215 E0.00900 ; perimeter
G1 X115.489 Y115.316 E0.00498 ; perimeter
G1 X115.472 Y115.428 E0.00525 ; perimeter
G1 X115.431 Y115.524 E0.00485 ; perimeter
G1 X115.326 Y115.674 E0.00848 ; perimeter
G1 X115.237 Y115.746 E0.00529 ; perimeter
G1 X115.057 Y115.779 E0.00847 ; perimeter
G1 X114.891 Y115.727 E0.00807 ; perimeter
G1 X114.749 Y115.616 E0.00837 ; perimeter
G1 X114.672 Y115.404 E0.01045 ; perimeter
G1 X114.813 Y115.248 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.698 Y115.174 E-0.06101 ; wipe and retract
G1 X114.745 Y115.092 E-0.02493 ; wipe and retract
G1 X114.819 Y115.023 E-0.02675 ; wipe and retract
G1 X114.902 Y114.982 E-0.02446 ; wipe and retract
G1 X115.044 Y114.965 E-0.03781 ; wipe and retract
G1 X115.188 Y114.969 E-0.03791 ; wipe and retract
G1 X115.288 Y115.002 E-0.02793 ; wipe and retract
G1 X115.348 Y115.050 E-0.02027 ; wipe and retract
G1 X115.452 Y115.215 E-0.05129 ; wipe and retract
G1 X115.489 Y115.316 E-0.02839 ; wipe and retract
G1 X115.472 Y115.428 E-0.02992 ; wipe and retract
G1 X115.431 Y115.524 E-0.02762 ; wipe and retract
G1 X115.326 Y115.674 E-0.04831 ; wipe and retract
G1 X115.237 Y115.746 E-0.03014 ; wipe and retract
G1 X115.057 Y115.779 E-0.04825 ; wipe and retract
G1 X114.891 Y115.727 E-0.04598 ; wipe and retract
G1 X114.749 Y115.616 E-0.04767 ; wipe and retract
G1 X114.672 Y115.404 E-0.05955 ; wipe and retract
;WIPE_END
G1 E-1.72179 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X115.654 Y109.070 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.844 Y109.268 E0.01275 ; perimeter
G1 X115.895 Y109.383 E0.00580 ; perimeter
G1 X115.909 Y109.714 E0.01534 ; perimeter
G1 X115.865 Y109.917 E0.00965 ; perimeter
G1 X115.773 Y110.043 E0.00721 ; perimeter
G1 X115.725 Y110.073 E0.00262 ; perimeter
G1 X115.474 Y110.118 E0.01184 ; perimeter
G1 X115.305 Y110.083 E0.00798 ; perimeter
G1 X115.226 Y110.019 E0.00472 ; perimeter
G1 X115.134 Y109.879 E0.00778 ; perimeter
G1 X115.107 Y109.695 E0.00860 ; perimeter
G1 X115.111 Y109.393 E0.01397 ; perimeter
G1 X115.148 Y109.288 E0.00515 ; perimeter
G1 X115.229 Y109.167 E0.00677 ; perimeter
G1 X115.461 Y109.025 E0.01259 ; perimeter
G1 X115.595 Y109.056 E0.00638 ; perimeter
G1 X115.670 Y109.344 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.844 Y109.268 E-0.08627 ; wipe and retract
G1 X115.895 Y109.383 E-0.03303 ; wipe and retract
G1 X115.909 Y109.714 E-0.08737 ; wipe and retract
G1 X115.865 Y109.917 E-0.05497 ; wipe and retract
G1 X115.773 Y110.043 E-0.04107 ; wipe and retract
G1 X115.725 Y110.073 E-0.01495 ; wipe and retract
G1 X115.474 Y110.118 E-0.06748 ; wipe and retract
G1 X115.305 Y110.083 E-0.04549 ; wipe and retract
G1 X115.226 Y110.019 E-0.02690 ; wipe and retract
G1 X115.134 Y109.879 E-0.04433 ; wipe and retract
G1 X115.107 Y109.695 E-0.04899 ; wipe and retract
G1 X115.111 Y109.393 E-0.07959 ; wipe and retract
G1 X115.148 Y109.288 E-0.02933 ; wipe and retract
G1 X115.229 Y109.167 E-0.03858 ; wipe and retract
G1 X115.461 Y109.025 E-0.07170 ; wipe and retract
G1 X115.595 Y109.056 E-0.03634 ; wipe and retract
;WIPE_END
G1 E-1.59362 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X115.569 Y103.673 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.442 Y103.674 E0.00588 ; perimeter
G1 X115.304 Y103.620 E0.00685 ; perimeter
G1 X115.249 Y103.559 E0.00382 ; perimeter
G1 X115.176 Y103.314 E0.01182 ; perimeter
G1 X115.171 Y103.047 E0.01240 ; perimeter
G1 X115.262 Y102.833 E0.01073 ; perimeter
G1 X115.313 Y102.774 E0.00362 ; perimeter
G1 X115.465 Y102.718 E0.00754 ; perimeter
G1 X115.713 Y102.794 E0.01200 ; perimeter
G1 X115.778 Y102.861 E0.00434 ; perimeter
G1 X115.877 Y103.149 E0.01408 ; perimeter
G1 X115.873 Y103.308 E0.00738 ; perimeter
G1 X115.813 Y103.493 E0.00902 ; perimeter
G1 X115.666 Y103.645 E0.00979 ; perimeter
G1 X115.627 Y103.656 E0.00190 ; perimeter
G1 X115.484 Y103.579 F10800.000 ; move inwards before travel
G1 X115.468 Y103.425 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.169756
G1 F2400.000
G1 X115.510 Y103.369 E0.00074 ; infill
;WIDTH:0.195774
G1 X115.516 Y103.344 E0.00033 ; infill
;WIDTH:0.226265
G1 X115.530 Y103.212 E0.00202 ; infill
G1 X115.509 Y103.102 E0.00170 ; infill
G1 X115.513 Y102.984 E0.00180 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.509 Y103.102 E-0.03118 ; wipe and retract
G1 X115.530 Y103.212 E-0.02942 ; wipe and retract
G1 X115.516 Y103.344 E-0.03504 ; wipe and retract
;WIPE_END
G1 E-2.30435 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X103.247 Y101.448 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.163 Y101.242 E0.01029 ; perimeter
G1 X103.179 Y101.024 E0.01010 ; perimeter
G1 X103.239 Y100.908 E0.00607 ; perimeter
G1 X103.496 Y100.639 E0.01724 ; perimeter
G1 X103.861 Y100.454 E0.01896 ; perimeter
G1 X104.687 Y100.287 E0.03903 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.759 Y100.271 E0.00305 ; perimeter (bridge)
G1 X104.890 Y100.287 E0.00553 ; perimeter (bridge)
G1 X104.754 Y100.442 E0.00862 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.388 Y100.806 E0.02390 ; perimeter
G1 X104.295 Y100.975 E0.00893 ; perimeter
G1 X103.830 Y101.419 E0.02979 ; perimeter
G1 X103.667 Y101.494 E0.00831 ; perimeter
G1 X103.447 Y101.533 E0.01034 ; perimeter
G1 X103.301 Y101.473 E0.00729 ; perimeter
G1 X103.313 Y101.236 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.163 Y101.242 E-0.07106 ; wipe and retract
G1 X103.179 Y101.024 E-0.05752 ; wipe and retract
G1 X103.239 Y100.908 E-0.03458 ; wipe and retract
G1 X103.496 Y100.639 E-0.09822 ; wipe and retract
G1 X103.861 Y100.454 E-0.10799 ; wipe and retract
G1 X104.687 Y100.287 E-0.22238 ; wipe and retract
;WIPE_END
G1 E-1.80826 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X105.923 Y99.900 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.728 Y99.910 E0.00907 ; perimeter
G1 X105.854 Y99.756 E0.00922 ; perimeter
G1 X105.919 Y99.611 E0.00740 ; perimeter
G1 X106.142 Y99.378 E0.01492 ; perimeter
G1 X106.334 Y99.219 E0.01157 ; perimeter
G1 X106.897 Y98.998 E0.02799 ; perimeter
G1 X107.066 Y98.976 E0.00789 ; perimeter
G1 X107.604 Y98.775 E0.02660 ; perimeter
G1 X108.175 Y98.474 E0.02990 ; perimeter
G1 X108.216 Y98.415 E0.00335 ; perimeter
G1 X108.452 Y98.290 E0.01238 ; perimeter
G1 X108.663 Y98.222 E0.01030 ; perimeter
G1 X109.048 Y98.271 E0.01798 ; perimeter
G1 X109.411 Y98.477 E0.01932 ; perimeter
G1 X109.487 Y98.589 E0.00626 ; perimeter
G1 X109.635 Y98.693 E0.00839 ; perimeter
G1 X109.762 Y98.898 E0.01117 ; perimeter
G1 X109.905 Y98.939 E0.00691 ; perimeter
G1 X109.570 Y99.138 E0.01805 ; perimeter
G1 X109.163 Y99.178 E0.01894 ; perimeter
G1 X108.729 Y99.029 E0.02123 ; perimeter
G1 X108.493 Y99.004 E0.01102 ; perimeter
G1 X108.297 Y98.939 E0.00957 ; perimeter
G1 X108.022 Y98.909 E0.01279 ; perimeter
G1 X107.695 Y99.150 E0.01880 ; perimeter
G1 X107.565 Y99.350 E0.01107 ; perimeter
G1 X107.345 Y99.578 E0.01468 ; perimeter
G1 X106.947 Y99.823 E0.02165 ; perimeter
G1 X106.541 Y99.947 E0.01967 ; perimeter
G1 X106.354 Y99.948 E0.00864 ; perimeter
G1 X105.983 Y99.907 E0.01731 ; perimeter
G1 X105.824 Y99.732 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.728 Y99.910 E-0.06733 ; wipe and retract
G1 X105.854 Y99.756 E-0.05251 ; wipe and retract
G1 X105.919 Y99.611 E-0.04214 ; wipe and retract
G1 X106.142 Y99.378 E-0.08499 ; wipe and retract
G1 X106.334 Y99.219 E-0.06594 ; wipe and retract
G1 X106.897 Y98.998 E-0.15943 ; wipe and retract
G1 X107.066 Y98.976 E-0.04497 ; wipe and retract
G1 X107.604 Y98.775 E-0.15152 ; wipe and retract
G1 X108.175 Y98.474 E-0.17032 ; wipe and retract
G1 X108.216 Y98.415 E-0.01908 ; wipe and retract
G1 X108.452 Y98.290 E-0.07051 ; wipe and retract
G1 X108.663 Y98.222 E-0.05865 ; wipe and retract
G1 X109.048 Y98.271 E-0.10241 ; wipe and retract
G1 X109.411 Y98.477 E-0.11004 ; wipe and retract
G1 X109.487 Y98.589 E-0.03564 ; wipe and retract
G1 X109.635 Y98.693 E-0.04778 ; wipe and retract
G1 X109.762 Y98.898 E-0.06363 ; wipe and retract
G1 X109.905 Y98.939 E-0.03935 ; wipe and retract
G1 X109.570 Y99.138 E-0.10285 ; wipe and retract
G1 X109.163 Y99.178 E-0.10789 ; wipe and retract
G1 X108.729 Y99.029 E-0.12096 ; wipe and retract
G1 X108.493 Y99.004 E-0.06276 ; wipe and retract
G1 X108.297 Y98.939 E-0.05455 ; wipe and retract
G1 X108.022 Y98.909 E-0.07284 ; wipe and retract
G1 X107.695 Y99.150 E-0.10709 ; wipe and retract
G1 X107.565 Y99.350 E-0.06307 ; wipe and retract
G1 X107.345 Y99.578 E-0.08362 ; wipe and retract
G1 X106.964 Y99.813 E-0.11816 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X114.288 Y100.552 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.417 Y100.787 E0.00907 ; perimeter
G1 X114.300 Y100.610 E0.00715 ; perimeter
G1 X113.736 Y98.876 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X113.547 Y98.669 E0.00948 ; perimeter
G1 X113.692 Y98.653 E0.00493 ; perimeter
G1 X113.732 Y98.816 E0.00568 ; perimeter
G1 X114.123 Y98.284 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.148 Y98.497 E0.00992 ; perimeter
G1 X114.207 Y98.697 E0.00967 ; perimeter
G1 X114.235 Y99.134 E0.02028 ; perimeter
G1 X114.598 Y100.113 E0.04837 ; perimeter
G1 X114.874 Y100.617 E0.02662 ; perimeter
G1 X114.976 Y100.849 E0.01175 ; perimeter
G1 X115.070 Y101.139 E0.01410 ; perimeter
G1 X115.079 Y101.272 E0.00619 ; perimeter
G1 X115.041 Y101.480 E0.00981 ; perimeter
G1 X114.942 Y101.584 E0.00662 ; perimeter
G1 X114.781 Y101.588 E0.00749 ; perimeter
G1 X114.501 Y101.468 E0.01410 ; perimeter
G1 X114.350 Y101.364 E0.00851 ; perimeter
G1 X114.262 Y101.249 E0.00670 ; perimeter
G1 X114.066 Y101.148 E0.01020 ; perimeter
G1 X113.970 Y100.977 E0.00907 ; perimeter
G1 X113.877 Y100.915 E0.00518 ; perimeter
G1 X113.829 Y100.838 E0.00423 ; perimeter
G1 X113.830 Y100.715 E0.00566 ; perimeter
G1 X113.672 Y99.946 E0.03640 ; perimeter
G1 X113.662 Y99.757 E0.00873 ; perimeter
G1 X113.489 Y99.451 E0.01631 ; perimeter
G1 X113.395 Y99.219 E0.01158 ; perimeter
G1 X113.242 Y99.042 E0.01084 ; perimeter
G1 X112.796 Y98.712 E0.02569 ; perimeter
G1 X112.263 Y98.484 E0.02685 ; perimeter
G1 X111.906 Y98.456 E0.01659 ; perimeter
G1 X111.705 Y98.513 E0.00969 ; perimeter
G1 X111.624 Y98.589 E0.00512 ; perimeter
G1 X111.443 Y98.681 E0.00940 ; perimeter
G1 X111.360 Y98.811 E0.00715 ; perimeter
G1 X111.121 Y98.999 E0.01407 ; perimeter
G1 X110.949 Y99.032 E0.00814 ; perimeter
G1 X110.531 Y98.980 E0.01951 ; perimeter
G1 X110.398 Y98.906 E0.00705 ; perimeter
G1 X110.627 Y98.634 E0.01649 ; perimeter
G1 X110.634 Y98.458 E0.00816 ; perimeter
G1 X110.783 Y98.164 E0.01523 ; perimeter
G1 X110.925 Y97.974 E0.01100 ; perimeter
G1 X111.214 Y97.785 E0.01599 ; perimeter
G1 X111.302 Y97.763 E0.00423 ; perimeter
G1 X111.572 Y97.795 E0.01260 ; perimeter
G1 X112.048 Y97.893 E0.02249 ; perimeter
G1 X112.552 Y98.028 E0.02418 ; perimeter
G1 X112.806 Y98.064 E0.01187 ; perimeter
G1 X113.042 Y98.138 E0.01148 ; perimeter
G1 X113.308 Y98.147 E0.01232 ; perimeter
G1 X113.565 Y98.184 E0.01201 ; perimeter
G1 X113.828 Y98.146 E0.01232 ; perimeter
G1 X114.007 Y98.158 E0.00830 ; perimeter
G1 X114.090 Y98.234 E0.00523 ; perimeter
G1 X114.004 Y98.462 F10800.000 ; move inwards before travel
G1 X113.966 Y99.042 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29029
G1 F2400.000
G1 X113.916 Y99.137 E0.00222 ; infill
;WIDTH:0.314971
G1 X113.852 Y99.266 E0.00326 ; infill
G1 X114.036 Y99.681 E0.01028 ; infill
;WIDTH:0.347655
G1 X114.058 Y99.787 E0.00274 ; infill
;WIDTH:0.380338
G1 X114.079 Y99.894 E0.00304 ; infill
;WIDTH:0.42011
G1 X114.203 Y100.326 E0.01411 ; infill
G1 X113.317 Y98.595 F10800.000 ; move to first infill point
;WIDTH:0.207212
G1 F2400.000
G1 X112.979 Y98.451 E0.00501 ; infill
;WIDTH:0.196931
G1 X112.945 Y98.435 E0.00048 ; infill
;WIDTH:0.186392
G1 X112.739 Y98.359 E0.00262 ; infill
;WIDTH:0.163901
G1 X112.619 Y98.326 E0.00125 ; infill
;WIDTH:0.131461
G1 X112.500 Y98.292 E0.00092 ; infill
;WIDTH:0.0990211
G1 X112.461 Y98.279 E0.00019 ; infill
G1 X112.222 Y98.214 F10800.000 ; move to first infill point
;WIDTH:0.137171
G1 F2400.000
G1 X111.886 Y98.160 E0.00267 ; infill
G1 X111.147 Y98.123 E0.00580 ; infill
G1 X111.326 Y98.008 F10800.000 ; move to first infill point
;WIDTH:0.395917
G1 F2400.000
G1 X111.380 Y98.215 E0.00627 ; infill
G1 X111.191 Y98.330 E0.00648 ; infill
G1 X111.138 Y98.385 E0.00224 ; infill
G1 X111.053 Y98.533 E0.00501 ; infill
;WIDTH:0.376869
G1 X110.854 Y98.777 E0.00875 ; infill
G1 X110.975 Y98.318 F10800.000 ; move to first infill point
;WIDTH:0.328391
G1 F2400.000
G1 X111.511 Y98.174 E0.01317 ; infill
G1 X111.986 Y98.126 E0.01133 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.511 Y98.174 E-0.12594 ; wipe and retract
G1 X110.975 Y98.318 E-0.14640 ; wipe and retract
;WIPE_END
G1 E-2.12767 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X109.051 Y98.550 ; move to first infill point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.312118
G1 F2400.000
G1 X108.317 Y98.692 E0.01672 ; infill
G1 X108.390 Y98.595 F10800.000 ; move to first infill point
;WIDTH:0.352137
G1 F2400.000
G1 X108.897 Y98.655 E0.01311 ; infill
G1 X109.457 Y98.907 E0.01580 ; infill
G1 X109.447 Y98.908 F10800.000 ; move to first infill point
;WIDTH:0.274059
G1 F2400.000
G1 X109.207 Y98.815 E0.00495 ; infill
G1 X108.584 Y98.501 E0.01342 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.207 Y98.815 E-0.18428 ; wipe and retract
G1 X109.447 Y98.908 E-0.06793 ; wipe and retract
;WIPE_END
G1 E-2.14780 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X106.789 Y99.619 ; move to first infill point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.125643
G1 F2400.000
G1 X107.400 Y99.128 E0.00539 ; infill
G1 X107.400 Y99.162 F10800.000 ; move to first infill point
;WIDTH:0.352578
G1 F2400.000
G1 X106.783 Y99.459 E0.01764 ; infill
G1 X106.187 Y99.680 E0.01637 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.783 Y99.459 E-0.16774 ; wipe and retract
G1 X107.400 Y99.162 E-0.18077 ; wipe and retract
;WIPE_END
G1 E-2.05149 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X104.187 Y100.673 ; move to first infill point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.263396
G1 F2400.000
G1 X103.986 Y100.785 E0.00420 ; infill
G1 X103.736 Y100.961 E0.00562 ; infill
G1 X103.551 Y101.130 E0.00459 ; infill
G1 X103.425 Y101.074 E0.00253 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.551 Y101.130 E-0.03643 ; wipe and retract
G1 X103.736 Y100.961 E-0.06605 ; wipe and retract
G1 X103.986 Y100.785 E-0.08085 ; wipe and retract
G1 X104.187 Y100.673 E-0.06051 ; wipe and retract
;WIPE_END
G1 E-2.15615 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X101.909 Y103.286 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.032 Y103.557 E0.01379 ; perimeter
G1 X102.035 Y103.757 E0.00929 ; perimeter
G1 X101.954 Y104.052 E0.01414 ; perimeter
G1 X101.797 Y104.249 E0.01167 ; perimeter
G1 X101.719 Y104.289 E0.00407 ; perimeter
G1 X101.616 Y104.303 E0.00480 ; perimeter
G1 X101.469 Y104.262 E0.00706 ; perimeter
G1 X101.301 Y104.130 E0.00991 ; perimeter
G1 X101.208 Y103.944 E0.00965 ; perimeter
G1 X101.208 Y103.888 E0.00260 ; perimeter
G1 X101.153 Y103.739 E0.00735 ; perimeter
G1 X101.215 Y103.492 E0.01176 ; perimeter
G1 X101.333 Y103.355 E0.00841 ; perimeter
G1 X101.549 Y103.219 E0.01181 ; perimeter
G1 X101.669 Y103.212 E0.00557 ; perimeter
G1 X101.866 Y103.244 E0.00922 ; perimeter
G1 X101.821 Y103.570 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.032 Y103.557 E-0.09345 ; wipe and retract
G1 X102.035 Y103.757 E-0.05291 ; wipe and retract
G1 X101.954 Y104.052 E-0.08056 ; wipe and retract
G1 X101.797 Y104.249 E-0.06651 ; wipe and retract
G1 X101.719 Y104.289 E-0.02320 ; wipe and retract
G1 X101.616 Y104.303 E-0.02736 ; wipe and retract
G1 X101.469 Y104.262 E-0.04022 ; wipe and retract
G1 X101.301 Y104.130 E-0.05647 ; wipe and retract
G1 X101.208 Y103.944 E-0.05495 ; wipe and retract
G1 X101.208 Y103.888 E-0.01481 ; wipe and retract
G1 X101.153 Y103.739 E-0.04190 ; wipe and retract
G1 X101.215 Y103.492 E-0.06700 ; wipe and retract
G1 X101.333 Y103.355 E-0.04792 ; wipe and retract
G1 X101.549 Y103.219 E-0.06727 ; wipe and retract
G1 X101.669 Y103.212 E-0.03171 ; wipe and retract
G1 X101.866 Y103.244 E-0.05254 ; wipe and retract
;WIPE_END
G1 E-1.58123 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X98.416 Y106.907 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X98.423 Y106.990 E0.00284 ; perimeter
G1 X98.355 Y107.006 E0.00238 ; perimeter
G1 X98.385 Y106.958 E0.00193 ; perimeter
G1 X98.842 Y106.655 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.927 Y106.920 E0.01288 ; perimeter
G1 X98.885 Y107.187 E0.01254 ; perimeter
G1 X98.778 Y107.351 E0.00902 ; perimeter
G1 X98.667 Y107.443 E0.00670 ; perimeter
G1 X98.521 Y107.463 E0.00681 ; perimeter
G1 X98.077 Y107.696 E0.02322 ; perimeter
G1 X97.785 Y107.780 E0.01411 ; perimeter
G1 X97.493 Y107.910 E0.01480 ; perimeter
G1 X97.350 Y108.059 E0.00954 ; perimeter
G1 X97.213 Y108.372 E0.01585 ; perimeter
G1 X97.299 Y109.017 E0.03013 ; perimeter
G1 X97.185 Y109.264 E0.01260 ; perimeter
G1 X96.865 Y109.582 E0.02085 ; perimeter
G1 X96.671 Y109.844 E0.01512 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X96.627 Y109.904 E0.00312 ; perimeter (bridge)
G1 X96.607 Y109.812 E0.00394 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X96.587 Y109.722 E0.00427 ; perimeter
G1 X96.605 Y109.562 E0.00747 ; perimeter
G1 X96.500 Y109.298 E0.01314 ; perimeter
G1 X96.488 Y108.993 E0.01414 ; perimeter
G1 X96.444 Y108.882 E0.00552 ; perimeter
G1 X96.418 Y108.565 E0.01473 ; perimeter
G1 X96.514 Y108.282 E0.01386 ; perimeter
G1 X97.088 Y107.694 E0.03807 ; perimeter
G1 X97.212 Y107.438 E0.01317 ; perimeter
G1 X97.542 Y107.141 E0.02060 ; perimeter
G1 X97.737 Y106.924 E0.01350 ; perimeter
G1 X97.953 Y106.740 E0.01313 ; perimeter
G1 X98.143 Y106.434 E0.01669 ; perimeter
G1 X98.312 Y106.248 E0.01162 ; perimeter
G1 X98.421 Y106.187 E0.00579 ; perimeter
G1 X98.834 Y105.669 E0.03070 ; perimeter
G1 X98.851 Y105.614 E0.00267 ; perimeter
G1 X99.229 Y105.194 E0.02617 ; perimeter
G1 X99.345 Y105.092 E0.00716 ; perimeter
G1 X99.483 Y105.024 E0.00713 ; perimeter
G1 X99.668 Y105.011 E0.00861 ; perimeter
G1 X99.885 Y105.060 E0.01031 ; perimeter
G1 X99.960 Y105.130 E0.00474 ; perimeter
G1 X100.007 Y105.278 E0.00719 ; perimeter
G1 X100.121 Y105.425 E0.00862 ; perimeter
G1 X100.133 Y105.567 E0.00657 ; perimeter
G1 X100.024 Y105.810 E0.01233 ; perimeter
G1 X99.818 Y105.953 E0.01161 ; perimeter
G1 X99.576 Y106.027 E0.01173 ; perimeter
G1 X99.149 Y106.110 E0.02018 ; perimeter
G1 X98.942 Y106.360 E0.01500 ; perimeter
G1 X98.929 Y106.469 E0.00507 ; perimeter
G1 X98.867 Y106.601 E0.00677 ; perimeter
G1 X98.616 Y106.817 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.927 Y106.920 E-0.08566 ; wipe and retract
G1 X98.885 Y107.187 E-0.07146 ; wipe and retract
G1 X98.778 Y107.351 E-0.05140 ; wipe and retract
G1 X98.667 Y107.443 E-0.03814 ; wipe and retract
G1 X98.521 Y107.463 E-0.03878 ; wipe and retract
G1 X98.077 Y107.696 E-0.13226 ; wipe and retract
G1 X97.785 Y107.780 E-0.08040 ; wipe and retract
G1 X97.493 Y107.910 E-0.08431 ; wipe and retract
G1 X97.350 Y108.059 E-0.05436 ; wipe and retract
G1 X97.213 Y108.372 E-0.09031 ; wipe and retract
G1 X97.299 Y109.017 E-0.17164 ; wipe and retract
G1 X97.185 Y109.264 E-0.07178 ; wipe and retract
G1 X96.865 Y109.582 E-0.11881 ; wipe and retract
G1 X96.671 Y109.844 E-0.08616 ; wipe and retract
;WIPE_END
G1 E-1.22453 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X96.968 Y115.561 ; move to first perimeter point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X97.584 Y115.545 E0.02855 ; perimeter
G1 X97.697 Y115.447 E0.00692 ; perimeter
G1 X98.065 Y115.333 E0.01785 ; perimeter
G1 X98.129 Y115.292 E0.00351 ; perimeter
G1 X98.358 Y115.232 E0.01099 ; perimeter
G1 X98.644 Y115.226 E0.01323 ; perimeter
G1 X98.786 Y115.300 E0.00743 ; perimeter
G1 X98.878 Y115.318 E0.00436 ; perimeter
G1 X99.264 Y115.555 E0.02097 ; perimeter
G1 X99.421 Y115.578 E0.00732 ; perimeter
G1 X99.571 Y115.712 E0.00931 ; perimeter
G1 X99.786 Y115.775 E0.01038 ; perimeter
G1 X99.742 Y115.833 E0.00335 ; perimeter
G1 X99.462 Y115.981 E0.01469 ; perimeter
G1 X98.833 Y116.122 E0.02989 ; perimeter
G1 X98.234 Y116.151 E0.02779 ; perimeter
G1 X97.866 Y116.115 E0.01710 ; perimeter
G1 X97.468 Y116.005 E0.01915 ; perimeter
G1 X97.004 Y115.685 E0.02607 ; perimeter
G1 X96.330 Y115.731 E0.03132 ; perimeter
G1 X96.050 Y115.677 E0.01320 ; perimeter
G1 X95.870 Y115.555 E0.01005 ; perimeter
G1 X95.765 Y115.433 E0.00748 ; perimeter
G1 X95.702 Y115.307 E0.00652 ; perimeter
G1 X95.650 Y115.111 E0.00939 ; perimeter
G1 X95.670 Y114.909 E0.00941 ; perimeter
G1 X95.546 Y114.743 E0.00956 ; perimeter
G1 X95.479 Y114.591 E0.00772 ; perimeter
G1 X95.269 Y114.439 E0.01201 ; perimeter
G1 X94.954 Y114.454 E0.01463 ; perimeter
G1 X94.770 Y114.412 E0.00875 ; perimeter
G1 X94.633 Y114.318 E0.00768 ; perimeter
G1 X94.522 Y114.087 E0.01186 ; perimeter
G1 X94.502 Y113.924 E0.00763 ; perimeter
G1 X94.598 Y113.308 E0.02885 ; perimeter
G1 X94.670 Y113.161 E0.00761 ; perimeter
G1 X94.573 Y112.453 E0.03309 ; perimeter
G1 X94.492 Y112.162 E0.01398 ; perimeter
G1 X94.487 Y111.782 E0.01763 ; perimeter
G1 X94.509 Y111.703 E0.00380 ; perimeter
G1 X94.541 Y111.609 E0.00457 ; perimeter
G1 X94.672 Y111.427 E0.01041 ; perimeter
G1 X95.011 Y111.148 E0.02033 ; perimeter
G1 X95.789 Y110.786 E0.03974 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X95.942 Y110.714 E0.00708 ; perimeter (bridge)
G1 X96.067 Y110.717 E0.00523 ; perimeter (bridge)
G1 X95.987 Y110.907 E0.00859 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X95.831 Y111.212 E0.01586 ; perimeter
G1 X95.674 Y111.382 E0.01073 ; perimeter
G1 X95.607 Y111.546 E0.00822 ; perimeter
G1 X95.458 Y111.735 E0.01114 ; perimeter
G1 X95.309 Y112.370 E0.03023 ; perimeter
G1 X95.329 Y112.758 E0.01799 ; perimeter
G1 X95.298 Y112.900 E0.00671 ; perimeter
G1 X95.300 Y113.062 E0.00754 ; perimeter
G1 X95.334 Y113.201 E0.00663 ; perimeter
G1 X95.344 Y113.548 E0.01606 ; perimeter
G1 X95.420 Y113.741 E0.00960 ; perimeter
G1 X95.474 Y114.011 E0.01276 ; perimeter
G1 X95.571 Y114.304 E0.01428 ; perimeter
G1 X95.850 Y114.632 E0.01996 ; perimeter
G1 X96.136 Y114.689 E0.01355 ; perimeter
G1 X96.280 Y114.789 E0.00808 ; perimeter
G1 X96.527 Y115.067 E0.01726 ; perimeter
G1 X96.584 Y115.107 E0.00317 ; perimeter
G1 X96.638 Y115.236 E0.00650 ; perimeter
G1 X96.925 Y115.519 E0.01868 ; perimeter
G1 X97.068 Y115.949 F10800.000 ; move inwards before travel
G1 X96.505 Y115.477 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.206055
G1 F2400.000
G1 X95.903 Y115.124 E0.00947 ; infill
G1 X95.911 Y114.917 F10800.000 ; move to first infill point
;WIDTH:0.37513
G1 F2400.000
G1 X96.106 Y115.206 E0.00961 ; infill
G1 X96.401 Y115.484 E0.01121 ; infill
G1 X97.656 Y115.802 F10800.000 ; move to first infill point
;WIDTH:0.414333
G1 F2400.000
G1 X98.244 Y115.723 E0.01833 ; infill
;WIDTH:0.426706
G1 X98.271 Y115.715 E0.00088 ; infill
;WIDTH:0.447387
G1 X98.309 Y115.703 E0.00134 ; infill
;WIDTH:0.471149
G1 X98.986 Y115.667 E0.02416 ; infill
G1 X99.105 Y115.740 F10800.000 ; move to first infill point
;WIDTH:0.405419
G1 F2400.000
G1 X98.670 Y115.707 E0.01314 ; infill
G1 X97.992 Y115.608 E0.02068 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.670 Y115.707 E-0.18102 ; wipe and retract
G1 X99.105 Y115.740 E-0.11503 ; wipe and retract
;WIPE_END
G1 E-2.10395 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X95.000 Y113.247 ; move to first infill point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.197321
G1 F2400.000
G1 X94.982 Y113.093 E0.00199 ; infill
;WIDTH:0.229878
G1 X94.966 Y112.854 E0.00372 ; infill
;WIDTH:0.273956
G1 X94.971 Y112.728 E0.00242 ; infill
;WIDTH:0.308343
G1 X94.934 Y112.355 E0.00827 ; infill
;WIDTH:0.322357
G1 X94.864 Y111.581 E0.01807 ; infill
G1 X94.731 Y112.048 F10800.000 ; move to first infill point
;WIDTH:0.317726
G1 F2400.000
G1 X95.128 Y111.542 E0.01469 ; infill
G1 X95.458 Y111.205 E0.01078 ; infill
G1 X95.181 Y111.335 F10800.000 ; move to first infill point
;WIDTH:0.49077
G1 F2400.000
G1 X94.959 Y111.824 E0.01999 ; infill
G1 X94.905 Y112.295 E0.01766 ; infill
;WIDTH:0.46156
G1 X94.856 Y112.745 E0.01577 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X94.905 Y112.295 E-0.11952 ; wipe and retract
;WIPE_END
G1 E-2.28048 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 X96.677 Y108.775 ; move to first infill point
G1 Z6.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.136049
G1 F2400.000
G1 X96.904 Y108.311 E0.00400 ; infill
G1 X97.039 Y108.115 E0.00185 ; infill
G1 X96.918 Y108.204 F10800.000 ; move to first infill point
;WIDTH:0.315335
G1 F2400.000
G1 X96.721 Y108.929 E0.01702 ; infill
G1 X96.910 Y109.197 F10800.000 ; move to first infill point
;WIDTH:0.363818
G1 F2400.000
G1 X96.800 Y108.322 E0.02355 ; infill
G1 X97.370 Y107.665 F10800.000 ; move to first infill point
;WIDTH:0.178809
G1 F2400.000
G1 X97.518 Y107.569 E0.00200 ; infill
;WIDTH:0.224484
G1 X98.175 Y107.167 E0.01163 ; infill
G1 X98.180 Y107.173 F10800.000 ; move to first infill point
;WIDTH:0.291388
G1 F2400.000
G1 X97.379 Y107.646 E0.01923 ; infill
G1 X97.520 Y107.634 F10800.000 ; move to first infill point
;WIDTH:0.370699
G1 F2400.000
G1 X98.008 Y107.255 E0.01685 ; infill
G1 X98.006 Y107.011 E0.00664 ; infill
G1 X98.541 Y106.505 F10800.000 ; move to first infill point
;WIDTH:0.160391
G1 F2400.000
G1 X98.710 Y106.275 E0.00279 ; infill
;LAYER_CHANGE
;Z:6.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;6.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.541 Y106.505 E-0.07539 ; wipe and retract
;WIPE_END
G1 E-2.32461 F2400.000 ; retract
G1 Z6.475 F10800.000 ; lift Z
G1 Z6.600 ; move to next layer (32)
;AFTER_LAYER_CHANGE
;6.6
G1 Z6.675 ; lift Z
G1 X101.343 Y104.246 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.227 Y103.997 E0.01274 ; perimeter
G1 X101.216 Y103.779 E0.01010 ; perimeter
G1 X101.295 Y103.490 E0.01389 ; perimeter
G1 X101.454 Y103.308 E0.01120 ; perimeter
G1 X101.629 Y103.233 E0.00878 ; perimeter
G1 X101.869 Y103.170 E0.01150 ; perimeter
G1 X102.032 Y103.186 E0.00761 ; perimeter
G1 X102.138 Y103.658 E0.02241 ; perimeter
G1 X102.051 Y104.002 E0.01643 ; perimeter
G1 X101.963 Y104.203 E0.01018 ; perimeter
G1 X101.841 Y104.352 E0.00893 ; perimeter
G1 X101.689 Y104.430 E0.00791 ; perimeter
G1 X101.464 Y104.368 E0.01081 ; perimeter
G1 X101.385 Y104.289 E0.00517 ; perimeter
G1 X101.449 Y103.993 F10800.000 ; move inwards before travel
G1 X101.822 Y103.432 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.330483
G1 F2400.000
G1 X101.684 Y103.699 E0.00720 ; infill
G1 X101.589 Y104.153 E0.01107 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.684 Y103.699 E-0.12212 ; wipe and retract
G1 X101.822 Y103.432 E-0.07948 ; wipe and retract
;WIPE_END
G1 E-2.19840 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X98.496 Y107.036 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X98.365 Y107.056 E0.00447 ; perimeter
G1 X98.438 Y106.985 E0.00343 ; perimeter
G1 X98.451 Y106.997 E0.00058 ; perimeter
G1 X98.929 Y106.085 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.826 Y106.684 E0.02816 ; perimeter
G1 X98.916 Y106.763 E0.00555 ; perimeter
G1 X99.015 Y107.051 E0.01409 ; perimeter
G1 X99.030 Y107.269 E0.01016 ; perimeter
G1 X98.977 Y107.347 E0.00437 ; perimeter
G1 X98.849 Y107.473 E0.00831 ; perimeter
G1 X98.508 Y107.521 E0.01595 ; perimeter
G1 X98.379 Y107.581 E0.00659 ; perimeter
G1 X98.215 Y107.592 E0.00760 ; perimeter
G1 X97.948 Y107.648 E0.01264 ; perimeter
G1 X97.744 Y107.727 E0.01013 ; perimeter
G1 X97.492 Y107.787 E0.01200 ; perimeter
G1 X97.224 Y107.930 E0.01406 ; perimeter
G1 X97.384 Y107.640 E0.01533 ; perimeter
G1 X97.380 Y107.580 E0.00279 ; perimeter
G1 X97.543 Y107.248 E0.01712 ; perimeter
G1 X98.021 Y106.718 E0.03307 ; perimeter
G1 X98.305 Y106.442 E0.01836 ; perimeter
G1 X98.732 Y106.216 E0.02233 ; perimeter
G1 X98.777 Y106.093 E0.00607 ; perimeter
G1 X98.973 Y105.856 E0.01428 ; perimeter
G1 X99.085 Y105.503 E0.01713 ; perimeter
G1 X99.374 Y105.172 E0.02037 ; perimeter
G1 X99.547 Y105.092 E0.00884 ; perimeter
G1 X99.714 Y105.074 E0.00776 ; perimeter
G1 X99.920 Y105.113 E0.00973 ; perimeter
G1 X100.037 Y105.206 E0.00688 ; perimeter
G1 X100.208 Y105.428 E0.01300 ; perimeter
G1 X100.258 Y105.625 E0.00945 ; perimeter
G1 X100.165 Y105.855 E0.01150 ; perimeter
G1 X99.992 Y105.954 E0.00924 ; perimeter
G1 X99.783 Y106.013 E0.01007 ; perimeter
G1 X99.480 Y105.993 E0.01406 ; perimeter
G1 X98.988 Y106.075 E0.02309 ; perimeter
G1 X98.530 Y106.051 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.826 Y106.684 E-0.16635 ; wipe and retract
G1 X98.916 Y106.763 E-0.03161 ; wipe and retract
G1 X99.015 Y107.051 E-0.08027 ; wipe and retract
G1 X99.030 Y107.269 E-0.05790 ; wipe and retract
G1 X98.977 Y107.347 E-0.02488 ; wipe and retract
G1 X98.849 Y107.473 E-0.04736 ; wipe and retract
G1 X98.508 Y107.521 E-0.09088 ; wipe and retract
G1 X98.379 Y107.581 E-0.03757 ; wipe and retract
G1 X98.215 Y107.592 E-0.04332 ; wipe and retract
G1 X97.948 Y107.648 E-0.07202 ; wipe and retract
G1 X97.744 Y107.727 E-0.05771 ; wipe and retract
G1 X97.492 Y107.787 E-0.06834 ; wipe and retract
G1 X97.224 Y107.930 E-0.08011 ; wipe and retract
G1 X97.384 Y107.640 E-0.08735 ; wipe and retract
G1 X97.380 Y107.580 E-0.01591 ; wipe and retract
G1 X97.543 Y107.248 E-0.09755 ; wipe and retract
G1 X98.021 Y106.718 E-0.18838 ; wipe and retract
G1 X98.305 Y106.442 E-0.10460 ; wipe and retract
G1 X98.732 Y106.216 E-0.12721 ; wipe and retract
G1 X98.777 Y106.093 E-0.03461 ; wipe and retract
G1 X98.973 Y105.856 E-0.08138 ; wipe and retract
G1 X99.085 Y105.503 E-0.09758 ; wipe and retract
G1 X99.374 Y105.172 E-0.11606 ; wipe and retract
G1 X99.547 Y105.092 E-0.05035 ; wipe and retract
G1 X99.714 Y105.074 E-0.04420 ; wipe and retract
G1 X99.920 Y105.113 E-0.05542 ; wipe and retract
G1 X100.037 Y105.206 E-0.03922 ; wipe and retract
G1 X100.208 Y105.428 E-0.07406 ; wipe and retract
G1 X100.258 Y105.625 E-0.05382 ; wipe and retract
G1 X100.165 Y105.855 E-0.06551 ; wipe and retract
G1 X99.992 Y105.954 E-0.05265 ; wipe and retract
G1 X99.861 Y105.991 E-0.03583 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X95.044 Y113.869 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.068 Y113.931 E0.00226 ; perimeter
G1 X95.056 Y113.928 E0.00044 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.068 Y113.931 E-0.00341 ; wipe and retract
G1 X95.056 Y113.928 E-0.00341 ; wipe and retract
;WIPE_END
G1 E-2.39318 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X97.119 Y108.409 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.375 Y108.866 E0.02427 ; perimeter
G1 X97.447 Y108.935 E0.00464 ; perimeter
G1 X97.449 Y109.082 E0.00682 ; perimeter
G1 X97.406 Y109.287 E0.00966 ; perimeter
G1 X97.032 Y109.681 E0.02518 ; perimeter
G1 X96.648 Y110.280 E0.03295 ; perimeter
G1 X96.256 Y110.958 E0.03629 ; perimeter
G1 X96.021 Y111.226 E0.01651 ; perimeter
G1 X95.781 Y111.424 E0.01441 ; perimeter
G1 X95.520 Y111.748 E0.01925 ; perimeter
G1 X95.354 Y112.371 E0.02986 ; perimeter
G1 X95.373 Y113.013 E0.02976 ; perimeter
G1 X95.404 Y113.158 E0.00688 ; perimeter
G1 X95.414 Y113.484 E0.01512 ; perimeter
G1 X95.687 Y114.203 E0.03562 ; perimeter
G1 X95.971 Y114.479 E0.01837 ; perimeter
G1 X96.300 Y114.728 E0.01909 ; perimeter
G1 X96.433 Y114.917 E0.01071 ; perimeter
G1 X96.521 Y115.149 E0.01149 ; perimeter
G1 X96.538 Y115.388 E0.01108 ; perimeter
G1 X96.561 Y115.435 E0.00242 ; perimeter
G1 X96.439 Y115.559 E0.00805 ; perimeter
G1 X96.194 Y115.607 E0.01158 ; perimeter
G1 X96.065 Y115.594 E0.00598 ; perimeter
G1 X95.975 Y115.556 E0.00451 ; perimeter
G1 X95.726 Y115.336 E0.01541 ; perimeter
G1 X95.627 Y115.165 E0.00915 ; perimeter
G1 X95.581 Y115.029 E0.00667 ; perimeter
G1 X95.593 Y114.910 E0.00552 ; perimeter
G1 X95.367 Y114.598 E0.01784 ; perimeter
G1 X95.125 Y114.423 E0.01384 ; perimeter
G1 X94.922 Y114.400 E0.00946 ; perimeter
G1 X94.806 Y114.353 E0.00582 ; perimeter
G1 X94.711 Y114.291 E0.00523 ; perimeter
G1 X94.658 Y114.222 E0.00405 ; perimeter
G1 X94.607 Y114.104 E0.00593 ; perimeter
G1 X94.573 Y114.006 E0.00479 ; perimeter
G1 X94.553 Y113.795 E0.00984 ; perimeter
G1 X94.553 Y113.622 E0.00801 ; perimeter
G1 X94.596 Y113.332 E0.01356 ; perimeter
G1 X94.617 Y112.816 E0.02393 ; perimeter
G1 X94.578 Y112.379 E0.02035 ; perimeter
G1 X94.546 Y112.245 E0.00637 ; perimeter
G1 X94.549 Y111.744 E0.02322 ; perimeter
G1 X94.604 Y111.559 E0.00896 ; perimeter
G1 X94.729 Y111.376 E0.01026 ; perimeter
G1 X95.005 Y111.113 E0.01766 ; perimeter
G1 X95.238 Y110.929 E0.01374 ; perimeter
G1 X95.854 Y110.569 E0.03304 ; perimeter
G1 X96.243 Y110.102 E0.02819 ; perimeter
G1 X96.351 Y109.944 E0.00884 ; perimeter
G1 X96.357 Y109.855 E0.00413 ; perimeter
G1 X96.482 Y109.581 E0.01396 ; perimeter
G1 X96.414 Y109.411 E0.00845 ; perimeter
G1 X96.411 Y109.332 E0.00367 ; perimeter
G1 X96.469 Y109.095 E0.01132 ; perimeter
G1 X96.465 Y108.719 E0.01742 ; perimeter
G1 X96.549 Y108.466 E0.01235 ; perimeter
G1 X96.672 Y108.336 E0.00826 ; perimeter
G1 X96.870 Y108.267 E0.00973 ; perimeter
G1 X97.123 Y108.068 E0.01489 ; perimeter
G1 X97.196 Y108.216 E0.00764 ; perimeter
G1 X97.141 Y108.353 E0.00682 ; perimeter
G1 X96.858 Y108.712 F10800.000 ; move inwards before travel
G1 X97.714 Y107.446 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.17744
G1 F2400.000
G1 X98.151 Y107.171 E0.00577 ; infill
G1 X98.275 Y107.340 F10800.000 ; move to first infill point
;WIDTH:0.159527
G1 F2400.000
G1 X97.920 Y107.190 E0.00374 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.275 Y107.340 E-0.10172 ; wipe and retract
;WIPE_END
G1 E-2.29828 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X94.782 Y112.048 ; move to first infill point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.337866
G1 F2400.000
G1 X95.167 Y111.529 E0.01584 ; infill
G1 X95.449 Y111.239 E0.00992 ; infill
;WIDTH:0.220635
G1 X95.908 Y110.891 E0.00851 ; infill
;WIDTH:0.113975
G1 X96.031 Y110.789 E0.00094 ; infill
G1 X96.113 Y110.674 E0.00083 ; infill
G1 X95.293 Y111.193 F10800.000 ; move to first infill point
;WIDTH:0.49694
G1 F2400.000
G1 X95.032 Y111.763 E0.02368 ; infill
G1 X94.989 Y112.002 E0.00917 ; infill
;WIDTH:0.457147
G1 X94.977 Y112.096 E0.00325 ; infill
;WIDTH:0.430659
G1 X94.966 Y112.190 E0.00304 ; infill
G1 X94.965 Y112.302 F10800.000 ; move to first infill point
;WIDTH:0.348163
G1 F2400.000
G1 X94.965 Y112.326 E0.00059 ; infill
;WIDTH:0.33992
G1 X94.992 Y112.799 E0.01170 ; infill
;WIDTH:0.310237
G1 X95.003 Y113.362 E0.01253 ; infill
G1 X94.987 Y113.635 E0.00608 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.003 Y113.362 E-0.07213 ; wipe and retract
G1 X94.992 Y112.799 E-0.14871 ; wipe and retract
;WIPE_END
G1 E-2.17916 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X96.253 Y115.350 ; move to first infill point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.208677
G1 F2400.000
G1 X95.895 Y114.805 E0.00899 ; infill
;WIDTH:0.171771
G1 X95.788 Y114.696 E0.00163 ; infill
;WIDTH:0.127327
G1 X95.654 Y114.542 E0.00143 ; infill
G1 X95.662 Y114.536 F10800.000 ; move to first infill point
;WIDTH:0.362069
G1 F2400.000
G1 X95.994 Y115.000 E0.01514 ; infill
;WIDTH:0.375772
G1 X96.287 Y115.343 E0.01250 ; infill
G1 X97.668 Y115.769 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.741 Y115.602 E0.00845 ; perimeter
G1 X98.044 Y115.344 E0.01843 ; perimeter
G1 X98.266 Y115.212 E0.01197 ; perimeter
G1 X98.522 Y115.154 E0.01213 ; perimeter
G1 X98.653 Y115.145 E0.00610 ; perimeter
G1 X98.788 Y115.214 E0.00705 ; perimeter
G1 X98.951 Y115.361 E0.01017 ; perimeter
G1 X99.153 Y115.485 E0.01097 ; perimeter
G1 X99.170 Y115.645 E0.00746 ; perimeter
G1 X99.276 Y115.735 E0.00643 ; perimeter
G1 X99.272 Y115.801 E0.00303 ; perimeter
G1 X99.178 Y115.907 E0.00657 ; perimeter
G1 X99.047 Y115.983 E0.00700 ; perimeter
G1 X98.613 Y116.078 E0.02059 ; perimeter
G1 X98.291 Y116.093 E0.01492 ; perimeter
G1 X98.048 Y116.062 E0.01136 ; perimeter
G1 X97.797 Y115.987 E0.01213 ; perimeter
G1 X97.765 Y115.962 E0.00186 ; perimeter
G1 X97.702 Y115.818 E0.00726 ; perimeter
G1 X97.834 Y115.693 F10800.000 ; move inwards before travel
G1 X97.947 Y115.749 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.397511
G1 F2400.000
G1 X98.825 Y115.567 E0.02644 ; infill
G1 X98.939 Y115.759 F10800.000 ; move to first infill point
;WIDTH:0.48173
G1 F2400.000
G1 X98.550 Y115.620 E0.01508 ; infill
G1 X98.005 Y115.694 E0.02007 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.550 Y115.620 E-0.14517 ; wipe and retract
G1 X98.939 Y115.759 E-0.10906 ; wipe and retract
;WIPE_END
G1 E-2.14577 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X106.056 Y115.618 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.141 Y115.526 E0.00581 ; perimeter
G1 X106.474 Y115.396 E0.01657 ; perimeter
G1 X106.966 Y115.383 E0.02278 ; perimeter
G1 X107.352 Y115.490 E0.01853 ; perimeter
G1 X107.572 Y115.701 E0.01414 ; perimeter
G1 X107.586 Y115.851 E0.00698 ; perimeter
G1 X107.539 Y115.944 E0.00485 ; perimeter
G1 X107.382 Y116.063 E0.00914 ; perimeter
G1 X107.279 Y116.107 E0.00517 ; perimeter
G1 X106.944 Y116.179 E0.01588 ; perimeter
G1 X106.507 Y116.162 E0.02022 ; perimeter
G1 X106.148 Y116.033 E0.01768 ; perimeter
G1 X106.045 Y115.919 E0.00711 ; perimeter
G1 X106.003 Y115.831 E0.00454 ; perimeter
G1 X105.997 Y115.800 E0.00145 ; perimeter
G1 X106.038 Y115.675 E0.00610 ; perimeter
G1 X106.181 Y115.625 F10800.000 ; move inwards before travel
G1 X106.275 Y115.736 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.157597
G1 F2400.000
G1 X106.318 Y115.777 E0.00057 ; infill
;WIDTH:0.170663
G1 X106.963 Y115.928 E0.00704 ; infill
G1 X107.265 Y115.741 F10800.000 ; move to first infill point
;WIDTH:0.353987
G1 F2400.000
G1 X106.909 Y115.781 E0.00926 ; infill
G1 X106.579 Y115.776 E0.00855 ; infill
;WIDTH:0.337153
G1 X106.283 Y115.729 E0.00733 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.579 Y115.776 E-0.07910 ; wipe and retract
;WIPE_END
G1 E-2.32090 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X114.671 Y115.398 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.705 Y115.152 E0.01151 ; perimeter
G1 X114.738 Y115.094 E0.00304 ; perimeter
G1 X114.817 Y115.021 E0.00501 ; perimeter
G1 X114.903 Y114.979 E0.00441 ; perimeter
G1 X115.040 Y114.961 E0.00644 ; perimeter
G1 X115.196 Y114.966 E0.00719 ; perimeter
G1 X115.290 Y114.998 E0.00465 ; perimeter
G1 X115.350 Y115.046 E0.00357 ; perimeter
G1 X115.454 Y115.212 E0.00905 ; perimeter
G1 X115.492 Y115.314 E0.00502 ; perimeter
G1 X115.474 Y115.429 E0.00538 ; perimeter
G1 X115.440 Y115.508 E0.00401 ; perimeter
G1 X115.329 Y115.670 E0.00910 ; perimeter
G1 X115.244 Y115.739 E0.00505 ; perimeter
G1 X115.046 Y115.777 E0.00931 ; perimeter
G1 X114.901 Y115.730 E0.00709 ; perimeter
G1 X114.750 Y115.613 E0.00883 ; perimeter
G1 X114.692 Y115.454 E0.00783 ; perimeter
G1 X114.871 Y115.251 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.705 Y115.152 E-0.07986 ; wipe and retract
G1 X114.738 Y115.094 E-0.01734 ; wipe and retract
G1 X114.817 Y115.021 E-0.02855 ; wipe and retract
G1 X114.903 Y114.979 E-0.02515 ; wipe and retract
G1 X115.040 Y114.961 E-0.03669 ; wipe and retract
G1 X115.196 Y114.966 E-0.04096 ; wipe and retract
G1 X115.290 Y114.998 E-0.02648 ; wipe and retract
G1 X115.350 Y115.046 E-0.02032 ; wipe and retract
G1 X115.454 Y115.212 E-0.05157 ; wipe and retract
G1 X115.492 Y115.314 E-0.02860 ; wipe and retract
G1 X115.474 Y115.429 E-0.03066 ; wipe and retract
G1 X115.440 Y115.508 E-0.02286 ; wipe and retract
G1 X115.329 Y115.670 E-0.05187 ; wipe and retract
G1 X115.244 Y115.739 E-0.02877 ; wipe and retract
G1 X115.046 Y115.777 E-0.05306 ; wipe and retract
G1 X114.901 Y115.730 E-0.04040 ; wipe and retract
G1 X114.750 Y115.613 E-0.05031 ; wipe and retract
G1 X114.692 Y115.454 E-0.04463 ; wipe and retract
;WIPE_END
G1 E-1.72196 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X115.464 Y110.106 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.326 Y110.067 E0.00664 ; perimeter
G1 X115.225 Y109.999 E0.00563 ; perimeter
G1 X115.137 Y109.848 E0.00809 ; perimeter
G1 X115.105 Y109.584 E0.01233 ; perimeter
G1 X115.111 Y109.237 E0.01604 ; perimeter
G1 X115.139 Y109.158 E0.00389 ; perimeter
G1 X115.247 Y108.983 E0.00954 ; perimeter
G1 X115.431 Y108.853 E0.01041 ; perimeter
G1 X115.483 Y108.838 E0.00253 ; perimeter
G1 X115.642 Y108.875 E0.00756 ; perimeter
G1 X115.829 Y109.071 E0.01253 ; perimeter
G1 X115.903 Y109.269 E0.00980 ; perimeter
G1 X115.913 Y109.652 E0.01774 ; perimeter
G1 X115.858 Y109.890 E0.01131 ; perimeter
G1 X115.740 Y110.038 E0.00878 ; perimeter
G1 X115.520 Y110.087 E0.01042 ; perimeter
G1 X115.394 Y109.981 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.326 Y110.067 E-0.05165 ; wipe and retract
G1 X115.225 Y109.999 E-0.03209 ; wipe and retract
G1 X115.137 Y109.848 E-0.04608 ; wipe and retract
G1 X115.105 Y109.584 E-0.07023 ; wipe and retract
G1 X115.111 Y109.237 E-0.09139 ; wipe and retract
G1 X115.139 Y109.158 E-0.02216 ; wipe and retract
G1 X115.247 Y108.983 E-0.05435 ; wipe and retract
G1 X115.431 Y108.853 E-0.05930 ; wipe and retract
G1 X115.483 Y108.838 E-0.01444 ; wipe and retract
G1 X115.642 Y108.875 E-0.04309 ; wipe and retract
G1 X115.829 Y109.071 E-0.07140 ; wipe and retract
G1 X115.903 Y109.269 E-0.05581 ; wipe and retract
G1 X115.913 Y109.652 E-0.10108 ; wipe and retract
G1 X115.858 Y109.890 E-0.06443 ; wipe and retract
G1 X115.740 Y110.038 E-0.05004 ; wipe and retract
G1 X115.520 Y110.087 E-0.05937 ; wipe and retract
;WIPE_END
G1 E-1.51309 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X115.485 Y103.766 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.439 Y103.766 E0.00213 ; perimeter
G1 X115.305 Y103.715 E0.00663 ; perimeter
G1 X115.243 Y103.648 E0.00421 ; perimeter
G1 X115.191 Y103.509 E0.00689 ; perimeter
G1 X115.160 Y103.339 E0.00801 ; perimeter
G1 X115.166 Y103.156 E0.00850 ; perimeter
G1 X115.262 Y102.945 E0.01072 ; perimeter
G1 X115.370 Y102.858 E0.00641 ; perimeter
G1 X115.564 Y102.835 E0.00906 ; perimeter
G1 X115.699 Y102.878 E0.00658 ; perimeter
G1 X115.785 Y102.968 E0.00574 ; perimeter
G1 X115.875 Y103.245 E0.01350 ; perimeter
G1 X115.871 Y103.404 E0.00740 ; perimeter
G1 X115.805 Y103.609 E0.00997 ; perimeter
G1 X115.671 Y103.736 E0.00853 ; perimeter
G1 X115.545 Y103.765 E0.00603 ; perimeter
G1 X115.456 Y103.730 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.439 Y103.766 E-0.02795 ; wipe and retract
G1 X115.305 Y103.715 E-0.03776 ; wipe and retract
G1 X115.243 Y103.648 E-0.02398 ; wipe and retract
G1 X115.191 Y103.509 E-0.03926 ; wipe and retract
G1 X115.160 Y103.339 E-0.04564 ; wipe and retract
G1 X115.166 Y103.156 E-0.04840 ; wipe and retract
G1 X115.262 Y102.945 E-0.06108 ; wipe and retract
G1 X115.370 Y102.858 E-0.03652 ; wipe and retract
G1 X115.564 Y102.835 E-0.05160 ; wipe and retract
G1 X115.699 Y102.878 E-0.03751 ; wipe and retract
G1 X115.785 Y102.968 E-0.03268 ; wipe and retract
G1 X115.875 Y103.245 E-0.07688 ; wipe and retract
G1 X115.871 Y103.404 E-0.04215 ; wipe and retract
G1 X115.805 Y103.609 E-0.05682 ; wipe and retract
G1 X115.671 Y103.736 E-0.04857 ; wipe and retract
G1 X115.545 Y103.765 E-0.03437 ; wipe and retract
;WIPE_END
G1 E-1.69884 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X107.427 Y99.228 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.288 Y99.490 E0.01375 ; perimeter
G1 X107.152 Y99.660 E0.01005 ; perimeter
G1 X106.814 Y99.874 E0.01853 ; perimeter
G1 X106.589 Y99.950 E0.01101 ; perimeter
G1 X106.449 Y99.950 E0.00650 ; perimeter
G1 X106.133 Y100.029 E0.01507 ; perimeter
G1 X105.822 Y100.033 E0.01441 ; perimeter
G1 X105.081 Y100.467 E0.03979 ; perimeter
G1 X104.492 Y100.856 E0.03270 ; perimeter
G1 X104.163 Y101.172 E0.02111 ; perimeter
G1 X104.009 Y101.274 E0.00857 ; perimeter
G1 X103.717 Y101.396 E0.01463 ; perimeter
G1 X103.635 Y101.410 E0.00385 ; perimeter
G1 X103.459 Y101.405 E0.00816 ; perimeter
G1 X103.361 Y101.352 E0.00518 ; perimeter
G1 X103.254 Y101.085 E0.01334 ; perimeter
G1 X103.266 Y100.883 E0.00936 ; perimeter
G1 X103.456 Y100.615 E0.01523 ; perimeter
G1 X103.532 Y100.553 E0.00453 ; perimeter
G1 X104.062 Y100.298 E0.02728 ; perimeter
G1 X104.700 Y100.080 E0.03121 ; perimeter
G1 X105.176 Y99.987 E0.02248 ; perimeter
G1 X105.826 Y99.600 E0.03505 ; perimeter
G1 X105.999 Y99.417 E0.01162 ; perimeter
G1 X106.199 Y99.277 E0.01135 ; perimeter
G1 X106.548 Y99.130 E0.01753 ; perimeter
G1 X106.814 Y99.069 E0.01265 ; perimeter
G1 X107.091 Y99.075 E0.01280 ; perimeter
G1 X107.182 Y99.041 E0.00450 ; perimeter
G1 X107.392 Y99.058 E0.00974 ; perimeter
G1 X107.426 Y99.088 E0.00211 ; perimeter
G1 X107.427 Y99.168 E0.00373 ; perimeter
G1 X107.141 Y99.307 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.288 Y99.490 E-0.09254 ; wipe and retract
G1 X107.152 Y99.660 E-0.05723 ; wipe and retract
G1 X106.814 Y99.874 E-0.10557 ; wipe and retract
G1 X106.589 Y99.950 E-0.06275 ; wipe and retract
G1 X106.449 Y99.950 E-0.03700 ; wipe and retract
G1 X106.133 Y100.029 E-0.08584 ; wipe and retract
G1 X105.822 Y100.033 E-0.08212 ; wipe and retract
G1 X105.081 Y100.467 E-0.22667 ; wipe and retract
G1 X104.492 Y100.856 E-0.18631 ; wipe and retract
G1 X104.163 Y101.172 E-0.12025 ; wipe and retract
G1 X104.009 Y101.274 E-0.04880 ; wipe and retract
G1 X103.717 Y101.396 E-0.08336 ; wipe and retract
G1 X103.635 Y101.410 E-0.02193 ; wipe and retract
G1 X103.459 Y101.405 E-0.04649 ; wipe and retract
G1 X103.361 Y101.352 E-0.02951 ; wipe and retract
G1 X103.254 Y101.085 E-0.07599 ; wipe and retract
G1 X103.266 Y100.883 E-0.05334 ; wipe and retract
G1 X103.456 Y100.615 E-0.08676 ; wipe and retract
G1 X103.532 Y100.553 E-0.02579 ; wipe and retract
G1 X104.062 Y100.298 E-0.15538 ; wipe and retract
G1 X104.700 Y100.080 E-0.17779 ; wipe and retract
G1 X105.176 Y99.987 E-0.12809 ; wipe and retract
G1 X105.826 Y99.600 E-0.19968 ; wipe and retract
G1 X105.999 Y99.417 E-0.06618 ; wipe and retract
G1 X106.075 Y99.364 E-0.02460 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X114.101 Y100.628 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.175 Y100.289 E0.01176 ; perimeter
G1 X114.380 Y100.765 E0.01754 ; perimeter
G1 X114.155 Y100.654 E0.00850 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.175 Y100.289 E-0.09664 ; wipe and retract
G1 X114.380 Y100.765 E-0.13671 ; wipe and retract
G1 X114.155 Y100.654 E-0.06624 ; wipe and retract
;WIPE_END
G1 E-2.10041 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X110.459 Y98.617 ; move to first perimeter point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.670 Y98.296 E0.01776 ; perimeter
G1 X110.806 Y98.156 E0.00903 ; perimeter
G1 X110.985 Y98.029 E0.01020 ; perimeter
G1 X111.131 Y97.952 E0.00761 ; perimeter
G1 X111.339 Y97.935 E0.00969 ; perimeter
G1 X111.760 Y98.053 E0.02024 ; perimeter
G1 X111.830 Y98.143 E0.00528 ; perimeter
G1 X112.103 Y98.162 E0.01267 ; perimeter
G1 X112.559 Y98.250 E0.02155 ; perimeter
G1 X112.825 Y98.248 E0.01229 ; perimeter
G1 X113.531 Y98.315 E0.03288 ; perimeter
G1 X113.916 Y98.423 E0.01850 ; perimeter
G1 X114.024 Y98.581 E0.00890 ; perimeter
G1 X114.159 Y99.030 E0.02170 ; perimeter
G1 X114.897 Y100.746 E0.08651 ; perimeter
G1 X114.959 Y100.981 E0.01127 ; perimeter
G1 X114.962 Y101.136 E0.00719 ; perimeter
G1 X114.916 Y101.290 E0.00743 ; perimeter
G1 X114.797 Y101.407 E0.00775 ; perimeter
G1 X114.660 Y101.410 E0.00632 ; perimeter
G1 X114.406 Y101.297 E0.01290 ; perimeter
G1 X114.333 Y101.293 E0.00338 ; perimeter
G1 X113.819 Y101.027 E0.02682 ; perimeter
G1 X113.611 Y100.887 E0.01160 ; perimeter
G1 X113.608 Y100.622 E0.01224 ; perimeter
G1 X113.681 Y100.291 E0.01571 ; perimeter
G1 X113.630 Y100.071 E0.01045 ; perimeter
G1 X113.624 Y99.956 E0.00537 ; perimeter
G1 X113.655 Y99.697 E0.01206 ; perimeter
G1 X113.413 Y99.115 E0.02922 ; perimeter
G1 X113.183 Y98.855 E0.01608 ; perimeter
G1 X112.887 Y98.662 E0.01638 ; perimeter
G1 X112.812 Y98.567 E0.00561 ; perimeter
G1 X112.210 Y98.286 E0.03077 ; perimeter
G1 X111.720 Y98.434 E0.02370 ; perimeter
G1 X111.630 Y98.518 E0.00568 ; perimeter
G1 X111.467 Y98.709 E0.01165 ; perimeter
G1 X111.235 Y99.212 E0.02567 ; perimeter
G1 X111.159 Y99.294 E0.00519 ; perimeter
G1 X110.221 Y99.171 E0.04383 ; perimeter
G1 X109.785 Y99.263 E0.02060 ; perimeter
G1 X109.354 Y99.297 E0.02003 ; perimeter
G1 X108.946 Y99.168 E0.01983 ; perimeter
G1 X108.867 Y99.119 E0.00432 ; perimeter
G1 X108.774 Y99.026 E0.00608 ; perimeter
G1 X108.545 Y98.876 E0.01268 ; perimeter
G1 X108.465 Y98.793 E0.00533 ; perimeter
G1 X108.332 Y98.735 E0.00674 ; perimeter
G1 X108.328 Y98.707 E0.00131 ; perimeter
G1 X108.510 Y98.440 E0.01498 ; perimeter
G1 X108.815 Y98.311 E0.01536 ; perimeter
G1 X109.016 Y98.324 E0.00933 ; perimeter
G1 X109.214 Y98.371 E0.00942 ; perimeter
G1 X109.664 Y98.584 E0.02304 ; perimeter
G1 X109.782 Y98.598 E0.00549 ; perimeter
G1 X109.923 Y98.696 E0.00798 ; perimeter
G1 X110.400 Y98.625 E0.02232 ; perimeter
G1 X110.813 Y98.765 F10800.000 ; move inwards before travel
G1 X110.791 Y99.003 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.503573
G1 F2400.000
G1 X111.026 Y98.581 E0.01847 ; infill
;WIDTH:0.387836
G1 X111.121 Y98.456 E0.00451 ; infill
G1 X111.431 Y98.200 E0.01153 ; infill
G1 X113.191 Y98.532 F10800.000 ; move to first infill point
;WIDTH:0.193883
G1 F2400.000
G1 X113.841 Y98.810 E0.00887 ; infill
G1 X113.580 Y98.579 F10800.000 ; move to first infill point
;WIDTH:0.287855
G1 F2400.000
G1 X114.015 Y99.616 E0.02291 ; infill
;WIDTH:0.305607
G1 X114.135 Y100.050 E0.00984 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.015 Y99.616 E-0.11887 ; wipe and retract
;WIPE_END
G1 E-2.28113 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 X108.952 Y98.864 ; move to first infill point
G1 Z6.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.260641
G1 F2400.000
G1 X109.584 Y98.928 E0.01150 ; infill
G1 X109.841 Y98.932 E0.00465 ; infill
G1 X109.751 Y99.024 F10800.000 ; move to first infill point
;WIDTH:0.377658
G1 F2400.000
G1 X109.297 Y98.862 E0.01342 ; infill
G1 X109.033 Y98.731 E0.00818 ; infill
;WIDTH:0.344616
G1 X109.005 Y98.717 E0.00079 ; infill
;WIDTH:0.330614
G1 X108.729 Y98.599 E0.00718 ; infill
G1 X107.117 Y99.317 F10800.000 ; move to first infill point
;WIDTH:0.309119
G1 F2400.000
G1 X106.644 Y99.516 E0.01136 ; infill
G1 X106.418 Y99.583 E0.00523 ; infill
;WIDTH:0.295633
G1 X106.389 Y99.591 E0.00063 ; infill
;WIDTH:0.287527
G1 X106.188 Y99.681 E0.00448 ; infill
;WIDTH:0.253265
G1 X106.000 Y99.767 E0.00361 ; infill
G1 X104.563 Y100.382 F10800.000 ; move to first infill point
;WIDTH:0.324512
G1 F2400.000
G1 X103.900 Y100.842 E0.01889 ; infill
G1 X103.768 Y100.912 E0.00349 ; infill
G1 X103.648 Y100.769 E0.00437 ; infill
;LAYER_CHANGE
;Z:6.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;6.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.768 Y100.912 E-0.04925 ; wipe and retract
G1 X103.900 Y100.842 E-0.03931 ; wipe and retract
G1 X104.563 Y100.382 E-0.21291 ; wipe and retract
;WIPE_END
G1 E-2.09853 F2400.000 ; retract
G1 Z6.675 F10800.000 ; lift Z
G1 Z6.800 ; move to next layer (33)
;AFTER_LAYER_CHANGE
;6.8
G1 Z6.875 ; lift Z
G1 X106.252 Y115.642 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.374 Y115.516 E0.00814 ; perimeter
G1 X106.704 Y115.382 E0.01650 ; perimeter
G1 X107.126 Y115.364 E0.01957 ; perimeter
G1 X107.255 Y115.380 E0.00603 ; perimeter
G1 X107.634 Y115.494 E0.01832 ; perimeter
G1 X107.902 Y115.725 E0.01638 ; perimeter
G1 X107.889 Y115.850 E0.00583 ; perimeter
G1 X107.799 Y115.952 E0.00632 ; perimeter
G1 X107.610 Y116.077 E0.01049 ; perimeter
G1 X107.210 Y116.177 E0.01910 ; perimeter
G1 X107.107 Y116.179 E0.00477 ; perimeter
G1 X106.671 Y116.146 E0.02027 ; perimeter
G1 X106.374 Y116.022 E0.01489 ; perimeter
G1 X106.274 Y115.914 E0.00681 ; perimeter
G1 X106.220 Y115.768 E0.00724 ; perimeter
G1 X106.237 Y115.700 E0.00322 ; perimeter
G1 X106.427 Y115.635 F10800.000 ; move inwards before travel
G1 X106.477 Y115.767 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.158082
G1 F2400.000
G1 X106.543 Y115.768 E0.00064 ; infill
G1 X107.237 Y115.923 E0.00681 ; infill
G1 X106.712 Y115.894 F10800.000 ; move to first infill point
;WIDTH:0.213917
G1 F2400.000
G1 X107.580 Y115.766 E0.01247 ; infill
G1 X107.566 Y115.753 F10800.000 ; move to first infill point
;WIDTH:0.367748
G1 F2400.000
G1 X107.160 Y115.774 E0.01098 ; infill
G1 X106.790 Y115.766 E0.00999 ; infill
;WIDTH:0.336219
G1 X106.511 Y115.721 E0.00690 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.790 Y115.766 E-0.07465 ; wipe and retract
;WIPE_END
G1 E-2.32535 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X114.700 Y115.226 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.698 Y115.156 E0.00325 ; perimeter
G1 X114.731 Y115.097 E0.00314 ; perimeter
G1 X114.815 Y115.019 E0.00533 ; perimeter
G1 X114.903 Y114.976 E0.00451 ; perimeter
G1 X115.197 Y114.960 E0.01364 ; perimeter
G1 X115.292 Y114.994 E0.00471 ; perimeter
G1 X115.352 Y115.043 E0.00357 ; perimeter
G1 X115.453 Y115.207 E0.00892 ; perimeter
G1 X115.493 Y115.321 E0.00559 ; perimeter
G1 X115.477 Y115.429 E0.00510 ; perimeter
G1 X115.331 Y115.666 E0.01287 ; perimeter
G1 X115.232 Y115.746 E0.00589 ; perimeter
G1 X115.057 Y115.782 E0.00829 ; perimeter
G1 X114.911 Y115.732 E0.00716 ; perimeter
G1 X114.767 Y115.621 E0.00844 ; perimeter
G1 X114.670 Y115.382 E0.01191 ; perimeter
G1 X114.688 Y115.285 E0.00459 ; perimeter
G1 X114.758 Y115.186 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.698 Y115.156 E-0.03408 ; wipe and retract
G1 X114.731 Y115.097 E-0.01790 ; wipe and retract
G1 X114.815 Y115.019 E-0.03034 ; wipe and retract
G1 X114.903 Y114.976 E-0.02571 ; wipe and retract
G1 X115.197 Y114.960 E-0.07772 ; wipe and retract
G1 X115.292 Y114.994 E-0.02682 ; wipe and retract
G1 X115.352 Y115.043 E-0.02036 ; wipe and retract
G1 X115.453 Y115.207 E-0.05080 ; wipe and retract
G1 X115.493 Y115.321 E-0.03183 ; wipe and retract
G1 X115.477 Y115.429 E-0.02905 ; wipe and retract
G1 X115.331 Y115.666 E-0.07332 ; wipe and retract
G1 X115.232 Y115.746 E-0.03353 ; wipe and retract
G1 X115.057 Y115.782 E-0.04723 ; wipe and retract
G1 X114.911 Y115.732 E-0.04077 ; wipe and retract
G1 X114.767 Y115.621 E-0.04808 ; wipe and retract
G1 X114.670 Y115.382 E-0.06786 ; wipe and retract
G1 X114.688 Y115.285 E-0.02616 ; wipe and retract
;WIPE_END
G1 E-1.71844 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X115.506 Y110.129 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.324 Y110.096 E0.00854 ; perimeter
G1 X115.222 Y110.021 E0.00588 ; perimeter
G1 X115.141 Y109.804 E0.01071 ; perimeter
G1 X115.103 Y109.300 E0.02342 ; perimeter
G1 X115.111 Y109.083 E0.01004 ; perimeter
G1 X115.264 Y108.788 E0.01543 ; perimeter
G1 X115.392 Y108.689 E0.00750 ; perimeter
G1 X115.520 Y108.655 E0.00612 ; perimeter
G1 X115.643 Y108.691 E0.00594 ; perimeter
G1 X115.806 Y108.844 E0.01033 ; perimeter
G1 X115.912 Y109.156 E0.01525 ; perimeter
G1 X115.917 Y109.598 E0.02049 ; perimeter
G1 X115.854 Y109.919 E0.01518 ; perimeter
G1 X115.721 Y110.060 E0.00894 ; perimeter
G1 X115.563 Y110.111 E0.00771 ; perimeter
G1 X115.404 Y109.975 F10800.000 ; move inwards before travel
G1 X115.632 Y109.799 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.258908
G1 F2400.000
G1 X115.564 Y109.357 E0.00804 ; infill
;WIDTH:0.226428
G1 X115.496 Y108.914 E0.00683 ; infill
G1 X115.473 Y108.931 F10800.000 ; move to first infill point
;WIDTH:0.367008
G1 F2400.000
G1 X115.509 Y109.216 E0.00775 ; infill
G1 X115.520 Y109.562 E0.00931 ; infill
;WIDTH:0.353164
G1 X115.512 Y109.698 E0.00353 ; infill
;WIDTH:0.316309
G1 X115.515 Y109.741 E0.00097 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.512 Y109.698 E-0.01123 ; wipe and retract
;WIPE_END
G1 E-2.38877 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X115.576 Y103.857 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.421 Y103.854 E0.00717 ; perimeter
G1 X115.290 Y103.799 E0.00661 ; perimeter
G1 X115.219 Y103.705 E0.00544 ; perimeter
G1 X115.166 Y103.541 E0.00797 ; perimeter
G1 X115.153 Y103.430 E0.00517 ; perimeter
G1 X115.174 Y103.227 E0.00948 ; perimeter
G1 X115.264 Y103.031 E0.00997 ; perimeter
G1 X115.369 Y102.961 E0.00587 ; perimeter
G1 X115.606 Y102.935 E0.01103 ; perimeter
G1 X115.701 Y102.975 E0.00478 ; perimeter
G1 X115.786 Y103.063 E0.00568 ; perimeter
G1 X115.872 Y103.325 E0.01278 ; perimeter
G1 X115.868 Y103.503 E0.00823 ; perimeter
G1 X115.817 Y103.678 E0.00844 ; perimeter
G1 X115.778 Y103.739 E0.00336 ; perimeter
G1 X115.678 Y103.827 E0.00619 ; perimeter
G1 X115.633 Y103.840 E0.00213 ; perimeter
G1 X115.477 Y103.737 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.421 Y103.854 E-0.05618 ; wipe and retract
G1 X115.290 Y103.799 E-0.03764 ; wipe and retract
G1 X115.219 Y103.705 E-0.03101 ; wipe and retract
G1 X115.166 Y103.541 E-0.04540 ; wipe and retract
G1 X115.153 Y103.430 E-0.02948 ; wipe and retract
G1 X115.174 Y103.227 E-0.05402 ; wipe and retract
G1 X115.264 Y103.031 E-0.05678 ; wipe and retract
G1 X115.369 Y102.961 E-0.03342 ; wipe and retract
G1 X115.606 Y102.935 E-0.06285 ; wipe and retract
G1 X115.701 Y102.975 E-0.02722 ; wipe and retract
G1 X115.786 Y103.063 E-0.03237 ; wipe and retract
G1 X115.872 Y103.325 E-0.07282 ; wipe and retract
G1 X115.868 Y103.503 E-0.04689 ; wipe and retract
G1 X115.817 Y103.678 E-0.04810 ; wipe and retract
G1 X115.778 Y103.739 E-0.01917 ; wipe and retract
G1 X115.678 Y103.827 E-0.03525 ; wipe and retract
G1 X115.633 Y103.840 E-0.01214 ; wipe and retract
;WIPE_END
G1 E-1.69926 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X114.286 Y100.678 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.993 Y100.636 E0.01003 ; perimeter
G1 X114.090 Y100.221 E0.01442 ; perimeter
G1 X114.263 Y100.622 E0.01477 ; perimeter
G1 X113.549 Y98.935 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.244 Y98.581 E0.02164 ; perimeter
G1 X113.668 Y98.646 E0.01984 ; perimeter
G1 X113.811 Y98.748 E0.00815 ; perimeter
G1 X114.037 Y99.041 E0.01713 ; perimeter
G1 X114.556 Y100.075 E0.05359 ; perimeter
G1 X114.804 Y100.666 E0.02968 ; perimeter
G1 X114.841 Y100.883 E0.01022 ; perimeter
G1 X114.840 Y100.991 E0.00499 ; perimeter
G1 X114.784 Y101.131 E0.00698 ; perimeter
G1 X114.684 Y101.220 E0.00620 ; perimeter
G1 X114.586 Y101.250 E0.00474 ; perimeter
G1 X114.501 Y101.212 E0.00429 ; perimeter
G1 X114.243 Y101.197 E0.01200 ; perimeter
G1 X114.145 Y101.145 E0.00513 ; perimeter
G1 X113.592 Y101.066 E0.02590 ; perimeter
G1 X113.544 Y101.047 E0.00238 ; perimeter
G1 X113.366 Y100.886 E0.01112 ; perimeter
G1 X113.332 Y100.747 E0.00664 ; perimeter
G1 X113.461 Y100.436 E0.01562 ; perimeter
G1 X113.550 Y100.411 E0.00428 ; perimeter
G1 X113.665 Y99.924 E0.02316 ; perimeter
G1 X113.693 Y99.523 E0.01861 ; perimeter
G1 X113.551 Y99.186 E0.01692 ; perimeter
G1 X113.524 Y99.077 E0.00524 ; perimeter
G1 X113.539 Y98.994 E0.00390 ; perimeter
G1 X113.765 Y98.598 F10800.000 ; move inwards before travel
G1 X113.950 Y99.655 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.113889
G1 F2400.000
G1 X113.970 Y99.523 E0.00078 ; infill
G1 X113.958 Y99.465 E0.00035 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.970 Y99.523 E-0.01560 ; wipe and retract
G1 X113.950 Y99.655 E-0.03499 ; wipe and retract
;WIPE_END
G1 E-2.34941 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X110.941 Y98.991 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.704 Y98.925 E0.00833 ; perimeter
G1 X110.899 Y98.776 E0.00829 ; perimeter
G1 X110.929 Y98.933 E0.00539 ; perimeter
G1 X111.399 Y98.823 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.462 Y99.145 E0.01521 ; perimeter
G1 X111.408 Y99.257 E0.00573 ; perimeter
G1 X111.576 Y99.543 E0.01536 ; perimeter
G1 X111.516 Y99.645 E0.00552 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.576 Y99.739 E0.00468 ; perimeter (bridge)
G1 X111.468 Y99.696 E0.00486 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.303 Y99.600 E0.00887 ; perimeter
G1 X110.621 Y99.400 E0.03292 ; perimeter
G1 X110.200 Y99.339 E0.01968 ; perimeter
G1 X110.012 Y99.378 E0.00893 ; perimeter
G1 X109.530 Y99.425 E0.02242 ; perimeter
G1 X109.279 Y99.351 E0.01210 ; perimeter
G1 X109.030 Y99.195 E0.01365 ; perimeter
G1 X108.811 Y98.988 E0.01393 ; perimeter
G1 X108.665 Y98.763 E0.01244 ; perimeter
G1 X108.654 Y98.645 E0.00548 ; perimeter
G1 X108.786 Y98.480 E0.00978 ; perimeter
G1 X109.023 Y98.398 E0.01162 ; perimeter
G1 X109.521 Y98.469 E0.02329 ; perimeter
G1 X109.729 Y98.567 E0.01067 ; perimeter
G1 X110.136 Y98.617 E0.01901 ; perimeter
G1 X110.468 Y98.498 E0.01634 ; perimeter
G1 X110.743 Y98.289 E0.01598 ; perimeter
G1 X110.958 Y98.152 E0.01182 ; perimeter
G1 X111.094 Y98.107 E0.00664 ; perimeter
G1 X111.245 Y98.113 E0.00699 ; perimeter
G1 X111.446 Y98.174 E0.00975 ; perimeter
G1 X111.489 Y98.283 E0.00540 ; perimeter
G1 X111.515 Y98.526 E0.01131 ; perimeter
G1 X111.475 Y98.710 E0.00872 ; perimeter
G1 X111.433 Y98.773 E0.00356 ; perimeter
G1 X111.116 Y98.989 F10800.000 ; move inwards before travel
G1 X110.454 Y98.784 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.139158
G1 F2400.000
G1 X110.187 Y98.929 E0.00242 ; infill
G1 X109.551 Y99.181 E0.00547 ; infill
G1 X110.059 Y99.122 F10800.000 ; move to first infill point
;WIDTH:0.116125
G1 F2400.000
G1 X110.018 Y99.055 E0.00048 ; infill
;WIDTH:0.247805
G1 X109.981 Y98.989 E0.00129 ; infill
;WIDTH:0.34553
G1 X109.577 Y98.980 E0.01017 ; infill
;WIDTH:0.444458
G1 X109.469 Y98.941 E0.00381 ; infill
G1 X108.966 Y98.665 E0.01918 ; infill
G1 X107.129 Y99.395 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.092 Y99.555 E0.00761 ; perimeter
G1 X106.962 Y99.737 E0.01036 ; perimeter
G1 X106.660 Y99.933 E0.01667 ; perimeter
G1 X106.410 Y100.031 E0.01243 ; perimeter
G1 X106.184 Y100.076 E0.01069 ; perimeter
G1 X105.873 Y100.187 E0.01527 ; perimeter
G1 X105.352 Y100.440 E0.02685 ; perimeter
G1 X104.444 Y100.955 E0.04836 ; perimeter
G1 X104.143 Y101.153 E0.01670 ; perimeter
G1 X103.775 Y101.295 E0.01824 ; perimeter
G1 X103.446 Y101.333 E0.01538 ; perimeter
G1 X103.273 Y101.258 E0.00871 ; perimeter
G1 X103.224 Y101.135 E0.00615 ; perimeter
G1 X103.234 Y100.826 E0.01431 ; perimeter
G1 X103.347 Y100.650 E0.00971 ; perimeter
G1 X103.586 Y100.452 E0.01433 ; perimeter
G1 X104.348 Y100.122 E0.03849 ; perimeter
G1 X105.236 Y99.786 E0.04398 ; perimeter
G1 X105.849 Y99.461 E0.03213 ; perimeter
G1 X106.035 Y99.336 E0.01037 ; perimeter
G1 X106.428 Y99.190 E0.01944 ; perimeter
G1 X106.683 Y99.157 E0.01188 ; perimeter
G1 X106.891 Y99.164 E0.00965 ; perimeter
G1 X107.047 Y99.233 E0.00790 ; perimeter
G1 X107.102 Y99.342 E0.00565 ; perimeter
G1 X106.997 Y99.493 F10800.000 ; move inwards before travel
G1 X106.840 Y99.405 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.339049
G1 F2400.000
G1 X106.482 Y99.585 E0.00987 ; infill
G1 X106.211 Y99.680 E0.00706 ; infill
;WIDTH:0.327311
G1 X106.096 Y99.727 E0.00293 ; infill
;WIDTH:0.279082
G1 X106.033 Y99.758 E0.00138 ; infill
;WIDTH:0.260587
G1 X105.751 Y99.883 E0.00558 ; infill
;WIDTH:0.215247
G1 X105.373 Y100.075 E0.00608 ; infill
;WIDTH:0.199127
G1 X104.963 Y100.261 E0.00585 ; infill
;WIDTH:0.295529
G1 X104.229 Y100.613 E0.01709 ; infill
;WIDTH:0.395616
G1 X103.678 Y100.900 E0.01823 ; infill
;WIDTH:0.367905
G1 X103.645 Y100.914 E0.00096 ; infill
;WIDTH:0.347778
G1 X103.469 Y101.024 E0.00527 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.645 Y100.914 E-0.05487 ; wipe and retract
;WIPE_END
G1 E-2.34513 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X101.652 Y104.576 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.481 Y104.516 E0.00838 ; perimeter
G1 X101.317 Y104.311 E0.01216 ; perimeter
G1 X101.289 Y104.134 E0.00831 ; perimeter
G1 X101.249 Y104.059 E0.00392 ; perimeter
G1 X101.258 Y103.858 E0.00932 ; perimeter
G1 X101.386 Y103.472 E0.01885 ; perimeter
G1 X101.611 Y103.222 E0.01556 ; perimeter
G1 X101.676 Y103.196 E0.00324 ; perimeter
G1 X102.121 Y102.826 E0.02680 ; perimeter
G1 X102.282 Y102.808 E0.00752 ; perimeter
G1 X102.291 Y102.971 E0.00754 ; perimeter
G1 X102.252 Y103.512 E0.02517 ; perimeter
G1 X102.130 Y103.990 E0.02282 ; perimeter
G1 X101.974 Y104.351 E0.01825 ; perimeter
G1 X101.863 Y104.475 E0.00767 ; perimeter
G1 X101.706 Y104.550 E0.00809 ; perimeter
G1 X101.565 Y104.418 F10800.000 ; move inwards before travel
G1 X101.666 Y104.302 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.401911
G1 F2400.000
G1 X101.679 Y103.974 E0.00982 ; infill
;WIDTH:0.41056
G1 X101.679 Y103.963 E0.00031 ; infill
;WIDTH:0.420338
G1 X101.685 Y103.937 E0.00085 ; infill
;WIDTH:0.428664
G1 X101.863 Y103.355 E0.01952 ; infill
G1 X102.025 Y103.308 F10800.000 ; move to first infill point
;WIDTH:0.324794
G1 F2400.000
G1 X101.851 Y103.537 E0.00674 ; infill
G1 X101.496 Y103.945 E0.01269 ; infill
G1 X100.296 Y105.441 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.327 Y105.466 E0.00184 ; perimeter
G1 X100.377 Y105.606 E0.00687 ; perimeter
G1 X100.382 Y105.710 E0.00484 ; perimeter
G1 X100.317 Y105.880 E0.00843 ; perimeter
G1 X100.275 Y105.926 E0.00289 ; perimeter
G1 X100.178 Y105.982 E0.00515 ; perimeter
G1 X99.906 Y106.042 E0.01291 ; perimeter
G1 X99.731 Y106.001 E0.00836 ; perimeter
G1 X99.607 Y105.997 E0.00571 ; perimeter
G1 X99.417 Y105.877 E0.01042 ; perimeter
G1 X99.267 Y105.873 E0.00695 ; perimeter
G1 X99.217 Y105.685 E0.00901 ; perimeter
G1 X99.314 Y105.395 E0.01415 ; perimeter
G1 X99.437 Y105.239 E0.00920 ; perimeter
G1 X99.628 Y105.158 E0.00963 ; perimeter
G1 X99.755 Y105.139 E0.00595 ; perimeter
G1 X99.931 Y105.160 E0.00820 ; perimeter
G1 X100.178 Y105.291 E0.01294 ; perimeter
G1 X100.259 Y105.394 E0.00606 ; perimeter
G1 X100.290 Y105.480 F10800.000 ; move inwards before travel
G1 X98.684 Y106.524 ; move to first perimeter point
G1 F1800.000
G1 X98.890 Y106.770 E0.01484 ; perimeter
G1 X98.986 Y106.854 E0.00591 ; perimeter
G1 X99.015 Y106.944 E0.00438 ; perimeter
G1 X99.161 Y107.156 E0.01196 ; perimeter
G1 X99.174 Y107.326 E0.00787 ; perimeter
G1 X99.160 Y107.362 E0.00178 ; perimeter
G1 X99.014 Y107.523 E0.01007 ; perimeter
G1 X98.712 Y107.577 E0.01422 ; perimeter
G1 X98.593 Y107.555 E0.00559 ; perimeter
G1 X98.313 Y107.566 E0.01299 ; perimeter
G1 X97.872 Y107.485 E0.02079 ; perimeter
G1 X97.728 Y107.506 E0.00672 ; perimeter
G1 X97.720 Y107.321 E0.00855 ; perimeter
G1 X97.813 Y107.130 E0.00985 ; perimeter
G1 X98.123 Y106.776 E0.02181 ; perimeter
G1 X98.251 Y106.657 E0.00810 ; perimeter
G1 X98.464 Y106.522 E0.01165 ; perimeter
G1 X98.624 Y106.524 E0.00744 ; perimeter
G1 X98.697 Y106.844 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.890 Y106.770 E-0.09554 ; wipe and retract
G1 X98.986 Y106.854 E-0.03366 ; wipe and retract
G1 X99.015 Y106.944 E-0.02496 ; wipe and retract
G1 X99.161 Y107.156 E-0.06813 ; wipe and retract
G1 X99.174 Y107.326 E-0.04484 ; wipe and retract
G1 X99.160 Y107.362 E-0.01015 ; wipe and retract
G1 X99.014 Y107.523 E-0.05738 ; wipe and retract
G1 X98.712 Y107.577 E-0.08102 ; wipe and retract
G1 X98.593 Y107.555 E-0.03185 ; wipe and retract
G1 X98.313 Y107.566 E-0.07397 ; wipe and retract
G1 X97.872 Y107.485 E-0.11843 ; wipe and retract
G1 X97.728 Y107.506 E-0.03826 ; wipe and retract
G1 X97.720 Y107.321 E-0.04871 ; wipe and retract
G1 X97.813 Y107.130 E-0.05609 ; wipe and retract
G1 X98.123 Y106.776 E-0.12424 ; wipe and retract
G1 X98.251 Y106.657 E-0.04616 ; wipe and retract
G1 X98.464 Y106.522 E-0.06638 ; wipe and retract
G1 X98.624 Y106.524 E-0.04240 ; wipe and retract
;WIPE_END
G1 E-1.33783 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X96.977 Y109.044 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X97.107 Y109.160 E0.00590 ; perimeter
G1 X96.929 Y109.297 E0.00759 ; perimeter
G1 X96.952 Y109.214 E0.00292 ; perimeter
G1 X96.950 Y109.067 E0.00497 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.107 Y109.160 E-0.04798 ; wipe and retract
G1 X96.929 Y109.297 E-0.05920 ; wipe and retract
G1 X96.952 Y109.214 E-0.02277 ; wipe and retract
G1 X96.950 Y109.067 E-0.03875 ; wipe and retract
;WIPE_END
G1 E-2.23130 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X95.107 Y113.829 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.125 Y113.886 E0.00202 ; perimeter
G1 X95.364 Y114.628 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.149 Y114.492 E0.01178 ; perimeter
G1 X94.985 Y114.354 E0.00995 ; perimeter
G1 X94.808 Y114.269 E0.00908 ; perimeter
G1 X94.692 Y114.112 E0.00901 ; perimeter
G1 X94.634 Y113.944 E0.00827 ; perimeter
G1 X94.609 Y113.681 E0.01224 ; perimeter
G1 X94.600 Y112.356 E0.06138 ; perimeter
G1 X94.621 Y111.694 E0.03066 ; perimeter
G1 X94.669 Y111.506 E0.00897 ; perimeter
G1 X94.780 Y111.334 E0.00951 ; perimeter
G1 X95.242 Y110.893 E0.02959 ; perimeter
G1 X95.858 Y110.432 E0.03562 ; perimeter
G1 X96.060 Y110.163 E0.01558 ; perimeter
G1 X96.174 Y109.912 E0.01278 ; perimeter
G1 X96.332 Y109.661 E0.01374 ; perimeter
G1 X96.469 Y109.152 E0.02440 ; perimeter
G1 X96.468 Y109.010 E0.00661 ; perimeter
G1 X96.556 Y108.681 E0.01576 ; perimeter
G1 X96.676 Y108.549 E0.00827 ; perimeter
G1 X96.931 Y108.453 E0.01260 ; perimeter
G1 X97.065 Y108.467 E0.00628 ; perimeter
G1 X97.114 Y108.565 E0.00505 ; perimeter
G1 X97.263 Y108.653 E0.00802 ; perimeter
G1 X97.608 Y108.983 E0.02213 ; perimeter
G1 X97.713 Y109.155 E0.00933 ; perimeter
G1 X97.685 Y109.251 E0.00461 ; perimeter
G1 X97.394 Y109.558 E0.01959 ; perimeter
G1 X97.125 Y109.750 E0.01533 ; perimeter
G1 X96.913 Y110.041 E0.01666 ; perimeter
G1 X96.781 Y110.266 E0.01210 ; perimeter
G1 X96.700 Y110.668 E0.01897 ; perimeter
G1 X96.559 Y110.907 E0.01284 ; perimeter
G1 X96.468 Y111.016 E0.00659 ; perimeter
G1 X96.091 Y111.232 E0.02013 ; perimeter
G1 X95.867 Y111.417 E0.01345 ; perimeter
G1 X95.802 Y111.496 E0.00475 ; perimeter
G1 X95.545 Y111.680 E0.01466 ; perimeter
G1 X95.470 Y111.867 E0.00932 ; perimeter
G1 X95.335 Y112.384 E0.02475 ; perimeter
G1 X95.390 Y112.844 E0.02148 ; perimeter
G1 X95.393 Y113.046 E0.00934 ; perimeter
G1 X95.478 Y113.506 E0.02167 ; perimeter
G1 X95.527 Y113.565 E0.00354 ; perimeter
G1 X95.641 Y113.899 E0.01639 ; perimeter
G1 X96.058 Y114.341 E0.02815 ; perimeter
G1 X96.258 Y114.621 E0.01594 ; perimeter
G1 X96.365 Y114.703 E0.00622 ; perimeter
G1 X96.427 Y114.875 E0.00847 ; perimeter
G1 X96.456 Y115.031 E0.00735 ; perimeter
G1 X96.428 Y115.258 E0.01059 ; perimeter
G1 X96.309 Y115.420 E0.00931 ; perimeter
G1 X96.314 Y115.457 E0.00173 ; perimeter
G1 X96.068 Y115.484 E0.01146 ; perimeter
G1 X95.920 Y115.437 E0.00717 ; perimeter
G1 X95.725 Y115.281 E0.01156 ; perimeter
G1 X95.645 Y115.144 E0.00736 ; perimeter
G1 X95.526 Y114.998 E0.00873 ; perimeter
G1 X95.388 Y114.683 E0.01593 ; perimeter
G1 X95.417 Y114.379 F10800.000 ; move inwards before travel
G1 X95.708 Y114.503 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325211
G1 F2400.000
G1 X95.762 Y114.585 E0.00231 ; infill
;WIDTH:0.3548
G1 X95.876 Y114.784 E0.00595 ; infill
G1 X96.017 Y114.959 E0.00581 ; infill
G1 X96.127 Y115.242 E0.00789 ; infill
G1 X95.708 Y114.503 F10800.000 ; move to first infill point
;WIDTH:0.291489
G1 F2400.000
G1 X95.654 Y114.421 E0.00203 ; infill
;WIDTH:0.257767
G1 X95.636 Y114.398 E0.00051 ; infill
G1 X95.048 Y113.595 F10800.000 ; move to first infill point
;WIDTH:0.407327
G1 F2400.000
G1 X95.024 Y113.346 E0.00758 ; infill
;WIDTH:0.295404
G1 X94.968 Y112.335 E0.02126 ; infill
;WIDTH:0.33899
G1 X94.996 Y112.142 E0.00481 ; infill
;WIDTH:0.382575
G1 X95.024 Y111.948 E0.00552 ; infill
;WIDTH:0.432985
G1 X95.074 Y111.683 E0.00875 ; infill
G1 X95.376 Y111.099 E0.02134 ; infill
G1 X94.857 Y111.855 F10800.000 ; move to first infill point
;WIDTH:0.341678
G1 F2400.000
G1 X95.263 Y111.406 E0.01503 ; infill
G1 X95.879 Y110.904 E0.01975 ; infill
;WIDTH:0.378317
G1 X96.130 Y110.738 E0.00838 ; infill
;WIDTH:0.391012
G1 X96.168 Y110.709 E0.00140 ; infill
;WIDTH:0.405898
G1 X96.681 Y109.962 E0.02735 ; infill
G1 X96.528 Y110.007 F10800.000 ; move to first infill point
;WIDTH:0.262657
G1 F2400.000
G1 X96.447 Y110.157 E0.00313 ; infill
G1 X96.167 Y110.911 E0.01468 ; infill
G1 X96.279 Y110.265 F10800.000 ; move to first infill point
;WIDTH:0.136439
G1 F2400.000
G1 X96.852 Y109.677 E0.00639 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.279 Y110.265 E-0.21677 ; wipe and retract
;WIPE_END
G1 E-2.18323 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 X98.637 Y115.060 ; move to first perimeter point
G1 Z6.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.786 Y115.101 E0.00715 ; perimeter
G1 X98.990 Y115.285 E0.01272 ; perimeter
G1 X99.048 Y115.481 E0.00946 ; perimeter
G1 X99.107 Y115.548 E0.00411 ; perimeter
G1 X99.050 Y115.705 E0.00776 ; perimeter
G1 X99.056 Y115.770 E0.00300 ; perimeter
G1 X98.732 Y115.966 E0.01759 ; perimeter
G1 X98.419 Y116.025 E0.01475 ; perimeter
G1 X98.095 Y115.954 E0.01534 ; perimeter
G1 X98.050 Y115.922 E0.00255 ; perimeter
G1 X97.951 Y115.780 E0.00803 ; perimeter
G1 X97.899 Y115.638 E0.00704 ; perimeter
G1 X97.962 Y115.502 E0.00694 ; perimeter
G1 X98.074 Y115.410 E0.00671 ; perimeter
G1 X98.177 Y115.255 E0.00857 ; perimeter
G1 X98.227 Y115.213 E0.00305 ; perimeter
G1 X98.376 Y115.129 E0.00794 ; perimeter
G1 X98.579 Y115.076 E0.00971 ; perimeter
G1 X98.706 Y115.199 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:7
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;7
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.786 Y115.101 E-0.05501 ; wipe and retract
G1 X98.990 Y115.285 E-0.07246 ; wipe and retract
G1 X99.048 Y115.481 E-0.05389 ; wipe and retract
G1 X99.107 Y115.548 E-0.02340 ; wipe and retract
G1 X99.050 Y115.705 E-0.04422 ; wipe and retract
G1 X99.056 Y115.770 E-0.01707 ; wipe and retract
G1 X98.732 Y115.966 E-0.10020 ; wipe and retract
G1 X98.419 Y116.025 E-0.08404 ; wipe and retract
G1 X98.095 Y115.954 E-0.08739 ; wipe and retract
G1 X98.050 Y115.922 E-0.01453 ; wipe and retract
G1 X97.951 Y115.780 E-0.04577 ; wipe and retract
G1 X97.899 Y115.638 E-0.04009 ; wipe and retract
G1 X97.962 Y115.502 E-0.03956 ; wipe and retract
G1 X98.074 Y115.410 E-0.03825 ; wipe and retract
G1 X98.177 Y115.255 E-0.04883 ; wipe and retract
G1 X98.227 Y115.213 E-0.01739 ; wipe and retract
G1 X98.376 Y115.129 E-0.04523 ; wipe and retract
G1 X98.579 Y115.076 E-0.05531 ; wipe and retract
;WIPE_END
G1 E-1.51734 F2400.000 ; retract
G1 Z6.875 F10800.000 ; lift Z
G1 Z7.000 ; move to next layer (34)
;AFTER_LAYER_CHANGE
;7
G1 Z7.075 ; lift Z
G1 X100.385 Y105.994 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.276 Y106.046 E0.00559 ; perimeter
G1 X100.037 Y106.073 E0.01113 ; perimeter
G1 X99.800 Y106.019 E0.01129 ; perimeter
G1 X99.617 Y105.931 E0.00937 ; perimeter
G1 X99.515 Y105.856 E0.00587 ; perimeter
G1 X99.437 Y105.529 E0.01556 ; perimeter
G1 X99.459 Y105.422 E0.00505 ; perimeter
G1 X99.559 Y105.288 E0.00774 ; perimeter
G1 X99.789 Y105.205 E0.01137 ; perimeter
G1 X100.052 Y105.231 E0.01224 ; perimeter
G1 X100.320 Y105.359 E0.01376 ; perimeter
G1 X100.439 Y105.465 E0.00740 ; perimeter
G1 X100.512 Y105.634 E0.00852 ; perimeter
G1 X100.508 Y105.787 E0.00708 ; perimeter
G1 X100.470 Y105.899 E0.00548 ; perimeter
G1 X100.425 Y105.949 E0.00312 ; perimeter
G1 X100.274 Y105.946 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.276 Y106.046 E-0.04689 ; wipe and retract
G1 X100.037 Y106.073 E-0.06343 ; wipe and retract
G1 X99.800 Y106.019 E-0.06429 ; wipe and retract
G1 X99.617 Y105.931 E-0.05337 ; wipe and retract
G1 X99.515 Y105.856 E-0.03344 ; wipe and retract
G1 X99.437 Y105.529 E-0.08867 ; wipe and retract
G1 X99.459 Y105.422 E-0.02879 ; wipe and retract
G1 X99.559 Y105.288 E-0.04409 ; wipe and retract
G1 X99.789 Y105.205 E-0.06477 ; wipe and retract
G1 X100.052 Y105.231 E-0.06972 ; wipe and retract
G1 X100.320 Y105.359 E-0.07838 ; wipe and retract
G1 X100.439 Y105.465 E-0.04216 ; wipe and retract
G1 X100.512 Y105.634 E-0.04852 ; wipe and retract
G1 X100.508 Y105.787 E-0.04035 ; wipe and retract
G1 X100.470 Y105.899 E-0.03120 ; wipe and retract
G1 X100.425 Y105.949 E-0.01780 ; wipe and retract
;WIPE_END
G1 E-1.58413 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X99.041 Y107.659 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.850 Y107.664 E0.00886 ; perimeter
G1 X98.591 Y107.575 E0.01270 ; perimeter
G1 X98.457 Y107.580 E0.00622 ; perimeter
G1 X98.278 Y107.435 E0.01067 ; perimeter
G1 X98.104 Y107.395 E0.00825 ; perimeter
G1 X97.996 Y107.275 E0.00745 ; perimeter
G1 X97.998 Y107.182 E0.00431 ; perimeter
G1 X98.060 Y107.052 E0.00672 ; perimeter
G1 X98.231 Y106.849 E0.01230 ; perimeter
G1 X98.452 Y106.703 E0.01223 ; perimeter
G1 X98.680 Y106.687 E0.01062 ; perimeter
G1 X98.815 Y106.787 E0.00776 ; perimeter
G1 X98.969 Y106.844 E0.00761 ; perimeter
G1 X99.130 Y106.976 E0.00965 ; perimeter
G1 X99.306 Y107.246 E0.01495 ; perimeter
G1 X99.319 Y107.400 E0.00713 ; perimeter
G1 X99.305 Y107.455 E0.00266 ; perimeter
G1 X99.220 Y107.585 E0.00715 ; perimeter
G1 X99.099 Y107.643 E0.00621 ; perimeter
G1 X98.909 Y107.520 F10800.000 ; move inwards before travel
G1 X98.425 Y107.010 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.377438
G1 F2400.000
G1 X98.599 Y107.153 E0.00626 ; infill
G1 X98.764 Y107.203 E0.00479 ; infill
G1 X99.070 Y107.374 E0.00976 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.764 Y107.203 E-0.09260 ; wipe and retract
G1 X98.599 Y107.153 E-0.04541 ; wipe and retract
G1 X98.425 Y107.010 E-0.05942 ; wipe and retract
;WIPE_END
G1 E-2.20258 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X97.158 Y109.220 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.927 Y109.397 E0.00984 ; perimeter
G1 X97.006 Y109.139 E0.00911 ; perimeter
G1 X97.038 Y109.137 E0.00109 ; perimeter
G1 X97.109 Y109.185 E0.00290 ; perimeter
G1 X96.383 Y110.454 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X96.344 Y110.612 E0.00553 ; perimeter
G1 X96.354 Y110.689 E0.00263 ; perimeter
G1 X96.050 Y110.837 E0.01147 ; perimeter
G1 X96.241 Y110.674 E0.00851 ; perimeter
G1 X96.350 Y110.504 E0.00683 ; perimeter
G1 X96.707 Y108.713 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.883 Y108.626 E0.00909 ; perimeter
G1 X97.021 Y108.654 E0.00656 ; perimeter
G1 X97.139 Y108.647 E0.00546 ; perimeter
G1 X97.235 Y108.686 E0.00479 ; perimeter
G1 X97.406 Y108.805 E0.00962 ; perimeter
G1 X97.719 Y108.887 E0.01503 ; perimeter
G1 X97.943 Y109.057 E0.01302 ; perimeter
G1 X97.990 Y109.168 E0.00557 ; perimeter
G1 X97.961 Y109.240 E0.00358 ; perimeter
G1 X97.783 Y109.421 E0.01177 ; perimeter
G1 X97.622 Y109.471 E0.00782 ; perimeter
G1 X97.109 Y109.865 E0.02995 ; perimeter
G1 X96.902 Y110.228 E0.01938 ; perimeter
G1 X96.905 Y110.349 E0.00560 ; perimeter
G1 X96.834 Y110.637 E0.01374 ; perimeter
G1 X96.855 Y110.787 E0.00699 ; perimeter
G1 X96.799 Y110.957 E0.00832 ; perimeter
G1 X96.744 Y111.037 E0.00452 ; perimeter
G1 X96.215 Y111.297 E0.02730 ; perimeter
G1 X96.004 Y111.336 E0.00992 ; perimeter
G1 X95.762 Y111.468 E0.01277 ; perimeter
G1 X95.507 Y111.650 E0.01449 ; perimeter
G1 X95.439 Y111.822 E0.00859 ; perimeter
G1 X95.348 Y111.951 E0.00730 ; perimeter
G1 X95.286 Y112.386 E0.02038 ; perimeter
G1 X95.319 Y112.868 E0.02234 ; perimeter
G1 X95.444 Y113.502 E0.02993 ; perimeter
G1 X95.648 Y113.749 E0.01486 ; perimeter
G1 X95.678 Y113.837 E0.00431 ; perimeter
G1 X95.788 Y113.949 E0.00727 ; perimeter
G1 X96.130 Y114.191 E0.01941 ; perimeter
G1 X96.366 Y114.495 E0.01784 ; perimeter
G1 X96.357 Y114.569 E0.00345 ; perimeter
G1 X96.434 Y114.878 E0.01475 ; perimeter
G1 X96.422 Y114.997 E0.00551 ; perimeter
G1 X96.340 Y115.198 E0.01009 ; perimeter
G1 X96.253 Y115.316 E0.00677 ; perimeter
G1 X96.192 Y115.349 E0.00322 ; perimeter
G1 X96.043 Y115.367 E0.00696 ; perimeter
G1 X95.880 Y115.326 E0.00778 ; perimeter
G1 X95.763 Y115.259 E0.00625 ; perimeter
G1 X95.669 Y115.168 E0.00605 ; perimeter
G1 X95.638 Y115.105 E0.00327 ; perimeter
G1 X95.442 Y114.865 E0.01434 ; perimeter
G1 X95.353 Y114.662 E0.01029 ; perimeter
G1 X94.988 Y114.374 E0.02151 ; perimeter
G1 X94.834 Y114.182 E0.01143 ; perimeter
G1 X94.715 Y113.938 E0.01254 ; perimeter
G1 X94.665 Y113.569 E0.01728 ; perimeter
G1 X94.667 Y112.500 E0.04952 ; perimeter
G1 X94.716 Y112.081 E0.01954 ; perimeter
G1 X94.719 Y111.803 E0.01289 ; perimeter
G1 X94.797 Y111.492 E0.01485 ; perimeter
G1 X94.952 Y111.254 E0.01315 ; perimeter
G1 X95.121 Y111.043 E0.01255 ; perimeter
G1 X95.506 Y110.668 E0.02487 ; perimeter
G1 X95.874 Y110.353 E0.02243 ; perimeter
G1 X96.090 Y110.018 E0.01849 ; perimeter
G1 X96.317 Y109.624 E0.02105 ; perimeter
G1 X96.384 Y109.414 E0.01021 ; perimeter
G1 X96.500 Y109.173 E0.01240 ; perimeter
G1 X96.577 Y108.874 E0.01429 ; perimeter
G1 X96.667 Y108.758 E0.00682 ; perimeter
G1 X96.890 Y108.781 F10800.000 ; move inwards before travel
G1 X97.420 Y109.080 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.124374
G1 F2400.000
G1 X97.503 Y109.119 E0.00063 ; infill
;WIDTH:0.150988
G1 X97.602 Y109.168 E0.00099 ; infill
G1 X97.680 Y109.182 E0.00071 ; infill
G1 X96.777 Y109.585 F10800.000 ; move to first infill point
;WIDTH:0.378374
G1 F2400.000
G1 X96.679 Y109.803 E0.00667 ; infill
;WIDTH:0.369217
G1 X96.524 Y110.075 E0.00849 ; infill
G1 X96.530 Y110.094 E0.00055 ; infill
;WIDTH:0.339129
G1 X96.562 Y110.161 E0.00184 ; infill
;WIDTH:0.302157
G1 X96.594 Y110.229 E0.00161 ; infill
;WIDTH:0.265184
G1 X96.626 Y110.296 E0.00138 ; infill
G1 X95.833 Y110.944 F10800.000 ; move to first infill point
;WIDTH:0.367926
G1 F2400.000
G1 X95.567 Y111.141 E0.00896 ; infill
;WIDTH:0.323089
G1 X95.391 Y111.287 E0.00533 ; infill
;WIDTH:0.286782
G1 X95.322 Y111.352 E0.00190 ; infill
;WIDTH:0.26096
G1 X95.254 Y111.416 E0.00170 ; infill
;WIDTH:0.235139
G1 X95.050 Y111.813 E0.00713 ; infill
;WIDTH:0.208196
G1 X95.020 Y112.097 E0.00393 ; infill
;WIDTH:0.168922
G1 X94.981 Y112.518 E0.00444 ; infill
G1 X95.015 Y113.127 E0.00639 ; infill
;WIDTH:0.30001
G1 X95.068 Y113.638 E0.01097 ; infill
G1 X95.245 Y114.269 E0.01402 ; infill
G1 X94.906 Y113.455 F10800.000 ; move to first infill point
;WIDTH:0.390381
G1 F2400.000
G1 X95.298 Y114.062 E0.02088 ; infill
G1 X95.531 Y114.275 E0.00910 ; infill
;WIDTH:0.397763
G1 X95.659 Y114.371 E0.00474 ; infill
;WIDTH:0.425043
G1 X96.185 Y114.877 E0.02318 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.659 Y114.371 E-0.19255 ; wipe and retract
;WIPE_END
G1 E-2.20745 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X98.089 Y115.524 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.138 Y115.365 E0.00771 ; perimeter
G1 X98.232 Y115.212 E0.00834 ; perimeter
G1 X98.428 Y115.055 E0.01160 ; perimeter
G1 X98.714 Y114.977 E0.01373 ; perimeter
G1 X98.785 Y114.988 E0.00337 ; perimeter
G1 X98.987 Y115.163 E0.01236 ; perimeter
G1 X99.069 Y115.452 E0.01393 ; perimeter
G1 X98.995 Y115.669 E0.01061 ; perimeter
G1 X98.825 Y115.834 E0.01098 ; perimeter
G1 X98.742 Y115.888 E0.00457 ; perimeter
G1 X98.554 Y115.924 E0.00886 ; perimeter
G1 X98.343 Y115.909 E0.00980 ; perimeter
G1 X98.216 Y115.849 E0.00653 ; perimeter
G1 X98.114 Y115.700 E0.00836 ; perimeter
G1 X98.098 Y115.583 E0.00544 ; perimeter
G1 X98.239 Y115.452 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.138 Y115.365 E-0.05861 ; wipe and retract
G1 X98.232 Y115.212 E-0.04754 ; wipe and retract
G1 X98.428 Y115.055 E-0.06609 ; wipe and retract
G1 X98.714 Y114.977 E-0.07823 ; wipe and retract
G1 X98.785 Y114.988 E-0.01918 ; wipe and retract
G1 X98.987 Y115.163 E-0.07043 ; wipe and retract
G1 X99.069 Y115.452 E-0.07937 ; wipe and retract
G1 X98.995 Y115.669 E-0.06043 ; wipe and retract
G1 X98.825 Y115.834 E-0.06255 ; wipe and retract
G1 X98.742 Y115.888 E-0.02605 ; wipe and retract
G1 X98.554 Y115.924 E-0.05048 ; wipe and retract
G1 X98.343 Y115.909 E-0.05585 ; wipe and retract
G1 X98.216 Y115.849 E-0.03719 ; wipe and retract
G1 X98.114 Y115.700 E-0.04761 ; wipe and retract
G1 X98.098 Y115.583 E-0.03098 ; wipe and retract
;WIPE_END
G1 E-1.60944 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X106.420 Y115.758 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.441 Y115.650 E0.00509 ; perimeter
G1 X106.575 Y115.488 E0.00974 ; perimeter
G1 X106.850 Y115.361 E0.01402 ; perimeter
G1 X107.282 Y115.346 E0.02001 ; perimeter
G1 X107.571 Y115.383 E0.01353 ; perimeter
G1 X108.022 Y115.507 E0.02164 ; perimeter
G1 X108.224 Y115.695 E0.01280 ; perimeter
G1 X108.301 Y115.738 E0.00409 ; perimeter
G1 X108.303 Y115.827 E0.00412 ; perimeter
G1 X108.162 Y115.958 E0.00893 ; perimeter
G1 X107.870 Y116.078 E0.01462 ; perimeter
G1 X107.492 Y116.171 E0.01801 ; perimeter
G1 X107.104 Y116.162 E0.01799 ; perimeter
G1 X106.774 Y116.128 E0.01538 ; perimeter
G1 X106.687 Y116.056 E0.00522 ; perimeter
G1 X106.609 Y116.026 E0.00387 ; perimeter
G1 X106.467 Y115.885 E0.00927 ; perimeter
G1 X106.441 Y115.814 E0.00351 ; perimeter
G1 X106.511 Y115.696 F10800.000 ; move inwards before travel
G1 X106.682 Y115.736 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.295977
G1 F2400.000
G1 X106.890 Y115.747 E0.00439 ; infill
;WIDTH:0.345535
G1 X106.942 Y115.751 E0.00131 ; infill
;WIDTH:0.360795
G1 X107.449 Y115.770 E0.01340 ; infill
G1 X107.921 Y115.742 E0.01250 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.449 Y115.770 E-0.12478 ; wipe and retract
G1 X106.942 Y115.751 E-0.13378 ; wipe and retract
;WIPE_END
G1 E-2.14144 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X114.693 Y115.249 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.690 Y115.161 E0.00410 ; perimeter
G1 X114.724 Y115.100 E0.00324 ; perimeter
G1 X114.813 Y115.016 E0.00564 ; perimeter
G1 X114.902 Y114.973 E0.00461 ; perimeter
G1 X115.198 Y114.955 E0.01370 ; perimeter
G1 X115.295 Y114.990 E0.00477 ; perimeter
G1 X115.354 Y115.039 E0.00358 ; perimeter
G1 X115.453 Y115.201 E0.00879 ; perimeter
G1 X115.495 Y115.328 E0.00618 ; perimeter
G1 X115.459 Y115.477 E0.00710 ; perimeter
G1 X115.334 Y115.662 E0.01035 ; perimeter
G1 X115.230 Y115.747 E0.00621 ; perimeter
G1 X115.058 Y115.783 E0.00815 ; perimeter
G1 X114.926 Y115.736 E0.00648 ; perimeter
G1 X114.747 Y115.589 E0.01073 ; perimeter
G1 X114.676 Y115.398 E0.00944 ; perimeter
G1 X114.686 Y115.309 E0.00415 ; perimeter
G1 X114.766 Y115.199 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.690 Y115.161 E-0.03911 ; wipe and retract
G1 X114.724 Y115.100 E-0.01846 ; wipe and retract
G1 X114.813 Y115.016 E-0.03213 ; wipe and retract
G1 X114.902 Y114.973 E-0.02626 ; wipe and retract
G1 X115.198 Y114.955 E-0.07807 ; wipe and retract
G1 X115.295 Y114.990 E-0.02717 ; wipe and retract
G1 X115.354 Y115.039 E-0.02039 ; wipe and retract
G1 X115.453 Y115.201 E-0.05008 ; wipe and retract
G1 X115.495 Y115.328 E-0.03521 ; wipe and retract
G1 X115.459 Y115.477 E-0.04045 ; wipe and retract
G1 X115.334 Y115.662 E-0.05895 ; wipe and retract
G1 X115.230 Y115.747 E-0.03537 ; wipe and retract
G1 X115.058 Y115.783 E-0.04642 ; wipe and retract
G1 X114.926 Y115.736 E-0.03693 ; wipe and retract
G1 X114.747 Y115.589 E-0.06114 ; wipe and retract
G1 X114.676 Y115.398 E-0.05376 ; wipe and retract
G1 X114.686 Y115.309 E-0.02364 ; wipe and retract
;WIPE_END
G1 E-1.71644 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X115.360 Y110.141 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.263 Y110.082 E0.00525 ; perimeter
G1 X115.209 Y110.020 E0.00383 ; perimeter
G1 X115.145 Y109.818 E0.00977 ; perimeter
G1 X115.101 Y109.208 E0.02834 ; perimeter
G1 X115.111 Y108.932 E0.01281 ; perimeter
G1 X115.169 Y108.780 E0.00753 ; perimeter
G1 X115.275 Y108.595 E0.00988 ; perimeter
G1 X115.387 Y108.506 E0.00659 ; perimeter
G1 X115.527 Y108.470 E0.00671 ; perimeter
G1 X115.641 Y108.505 E0.00553 ; perimeter
G1 X115.796 Y108.649 E0.00981 ; perimeter
G1 X115.848 Y108.750 E0.00525 ; perimeter
G1 X115.920 Y109.038 E0.01374 ; perimeter
G1 X115.919 Y109.517 E0.02218 ; perimeter
G1 X115.838 Y109.996 E0.02252 ; perimeter
G1 X115.724 Y110.111 E0.00748 ; perimeter
G1 X115.523 Y110.162 E0.00963 ; perimeter
G1 X115.419 Y110.149 E0.00483 ; perimeter
G1 X115.339 Y110.030 F10800.000 ; move inwards before travel
G1 X115.450 Y109.910 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.281013
G1 F2400.000
G1 X115.515 Y109.793 E0.00265 ; infill
;WIDTH:0.300791
G1 X115.511 Y109.748 E0.00095 ; infill
;WIDTH:0.329291
G1 X115.516 Y109.618 E0.00311 ; infill
;WIDTH:0.357792
G1 X115.521 Y109.487 E0.00342 ; infill
;WIDTH:0.37473
G1 X115.513 Y109.087 E0.01104 ; infill
G1 X115.477 Y108.742 E0.00957 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.513 Y109.087 E-0.09152 ; wipe and retract
G1 X115.521 Y109.487 E-0.10559 ; wipe and retract
;WIPE_END
G1 E-2.20289 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X115.584 Y103.949 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.408 Y103.943 E0.00817 ; perimeter
G1 X115.253 Y103.865 E0.00802 ; perimeter
G1 X115.180 Y103.723 E0.00739 ; perimeter
G1 X115.144 Y103.597 E0.00609 ; perimeter
G1 X115.138 Y103.469 E0.00592 ; perimeter
G1 X115.194 Y103.389 E0.00455 ; perimeter
G1 X115.212 Y103.221 E0.00782 ; perimeter
G1 X115.326 Y103.067 E0.00886 ; perimeter
G1 X115.368 Y103.046 E0.00218 ; perimeter
G1 X115.620 Y103.035 E0.01168 ; perimeter
G1 X115.703 Y103.069 E0.00418 ; perimeter
G1 X115.785 Y103.153 E0.00542 ; perimeter
G1 X115.862 Y103.366 E0.01049 ; perimeter
G1 X115.865 Y103.605 E0.01109 ; perimeter
G1 X115.823 Y103.757 E0.00728 ; perimeter
G1 X115.758 Y103.863 E0.00578 ; perimeter
G1 X115.643 Y103.935 E0.00629 ; perimeter
G1 X115.467 Y103.817 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.408 Y103.943 E-0.06194 ; wipe and retract
G1 X115.253 Y103.865 E-0.04567 ; wipe and retract
G1 X115.180 Y103.723 E-0.04207 ; wipe and retract
G1 X115.144 Y103.597 E-0.03470 ; wipe and retract
G1 X115.138 Y103.469 E-0.03374 ; wipe and retract
G1 X115.194 Y103.389 E-0.02591 ; wipe and retract
G1 X115.212 Y103.221 E-0.04457 ; wipe and retract
G1 X115.326 Y103.067 E-0.05047 ; wipe and retract
G1 X115.368 Y103.046 E-0.01243 ; wipe and retract
G1 X115.620 Y103.035 E-0.06654 ; wipe and retract
G1 X115.703 Y103.069 E-0.02379 ; wipe and retract
G1 X115.785 Y103.153 E-0.03089 ; wipe and retract
G1 X115.862 Y103.366 E-0.05979 ; wipe and retract
G1 X115.865 Y103.605 E-0.06316 ; wipe and retract
G1 X115.823 Y103.757 E-0.04150 ; wipe and retract
G1 X115.758 Y103.863 E-0.03292 ; wipe and retract
G1 X115.643 Y103.935 E-0.03583 ; wipe and retract
;WIPE_END
G1 E-1.69409 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X109.905 Y99.057 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.659 Y99.075 E0.00834 ; perimeter
G1 X109.608 Y99.021 E0.00254 ; perimeter
G1 X109.845 Y99.050 E0.00810 ; perimeter
G1 X110.462 Y99.014 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X110.885 Y98.851 E0.01533 ; perimeter
G1 X110.872 Y98.905 E0.00190 ; perimeter
G1 X110.989 Y99.118 E0.00822 ; perimeter
G1 X110.805 Y99.029 E0.00692 ; perimeter
G1 X110.522 Y99.017 E0.00957 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.885 Y98.851 E-0.10532 ; wipe and retract
G1 X110.872 Y98.905 E-0.01478 ; wipe and retract
G1 X110.989 Y99.118 E-0.06407 ; wipe and retract
G1 X110.805 Y99.029 E-0.05395 ; wipe and retract
G1 X110.522 Y99.017 E-0.07461 ; wipe and retract
;WIPE_END
G1 E-2.08726 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X113.996 Y100.496 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.060 Y100.454 E0.00260 ; perimeter
G1 X114.167 Y100.659 E0.00779 ; perimeter
G1 X113.957 Y100.676 E0.00710 ; perimeter
G1 X113.983 Y100.555 E0.00420 ; perimeter
G1 X113.535 Y100.342 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.566 Y100.199 E0.00677 ; perimeter
G1 X113.750 Y100.081 E0.01015 ; perimeter
G1 X113.756 Y99.913 E0.00778 ; perimeter
G1 X113.805 Y99.850 E0.00369 ; perimeter
G1 X113.931 Y99.533 E0.01580 ; perimeter
G1 X113.907 Y99.376 E0.00734 ; perimeter
G1 X114.007 Y99.445 E0.00560 ; perimeter
G1 X114.259 Y99.793 E0.01990 ; perimeter
G1 X114.696 Y100.631 E0.04381 ; perimeter
G1 X114.708 Y100.840 E0.00967 ; perimeter
G1 X114.593 Y101.064 E0.01171 ; perimeter
G1 X114.568 Y101.087 E0.00155 ; perimeter
G1 X114.348 Y101.134 E0.01041 ; perimeter
G1 X114.087 Y101.144 E0.01212 ; perimeter
G1 X113.841 Y101.181 E0.01151 ; perimeter
G1 X113.429 Y101.135 E0.01919 ; perimeter
G1 X113.245 Y101.060 E0.00918 ; perimeter
G1 X112.993 Y100.871 E0.01461 ; perimeter
G1 X112.822 Y100.694 E0.01140 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.686 Y100.553 E0.00819 ; perimeter (bridge)
G1 X112.271 Y100.370 E0.01897 ; perimeter (bridge)
G1 X112.117 Y100.260 E0.00791 ; perimeter (bridge)
G1 X111.951 Y100.200 E0.00741 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.764 Y100.134 E0.00918 ; perimeter
G1 X111.070 Y99.691 E0.03815 ; perimeter
G1 X110.686 Y99.507 E0.01972 ; perimeter
G1 X110.380 Y99.494 E0.01415 ; perimeter
G1 X110.253 Y99.454 E0.00617 ; perimeter
G1 X110.002 Y99.531 E0.01219 ; perimeter
G1 X109.728 Y99.565 E0.01278 ; perimeter
G1 X109.514 Y99.548 E0.00993 ; perimeter
G1 X109.388 Y99.500 E0.00622 ; perimeter
G1 X109.295 Y99.392 E0.00664 ; perimeter
G1 X109.186 Y99.318 E0.00609 ; perimeter
G1 X109.090 Y99.182 E0.00770 ; perimeter
G1 X108.988 Y99.079 E0.00673 ; perimeter
G1 X108.936 Y98.920 E0.00774 ; perimeter
G1 X108.876 Y98.822 E0.00532 ; perimeter
G1 X108.898 Y98.657 E0.00774 ; perimeter
G1 X108.972 Y98.571 E0.00525 ; perimeter
G1 X109.254 Y98.493 E0.01359 ; perimeter
G1 X110.185 Y98.605 E0.04340 ; perimeter
G1 X110.990 Y98.274 E0.04035 ; perimeter
G1 X111.233 Y98.331 E0.01156 ; perimeter
G1 X111.323 Y98.446 E0.00672 ; perimeter
G1 X111.328 Y98.497 E0.00240 ; perimeter
G1 X111.416 Y98.701 E0.01029 ; perimeter
G1 X111.384 Y98.835 E0.00639 ; perimeter
G1 X111.544 Y99.126 E0.01536 ; perimeter
G1 X111.573 Y99.260 E0.00636 ; perimeter
G1 X111.852 Y99.560 E0.01894 ; perimeter
G1 X111.928 Y99.694 E0.00719 ; perimeter
G1 X112.172 Y99.963 E0.01679 ; perimeter
G1 X112.242 Y100.070 E0.00592 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.315 Y100.181 E0.00557 ; perimeter (bridge)
G1 X112.652 Y100.381 E0.01638 ; perimeter (bridge)
G1 X112.863 Y100.584 E0.01223 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X112.892 Y100.612 E0.00184 ; perimeter
G1 X113.269 Y100.434 E0.01932 ; perimeter
G1 X113.277 Y100.415 E0.00095 ; perimeter
G1 X113.478 Y100.358 E0.00967 ; perimeter
G1 X113.681 Y100.346 F10800.000 ; move inwards before travel
G1 X114.031 Y100.187 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.147425
G1 F2400.000
G1 X114.048 Y99.995 E0.00167 ; infill
;WIDTH:0.122623
G1 X114.050 Y99.912 E0.00055 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.048 Y99.995 E-0.02186 ; wipe and retract
;WIPE_END
G1 E-2.37814 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X111.665 Y99.760 ; move to first infill point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.108952
G1 F2400.000
G1 X111.400 Y99.532 E0.00192 ; infill
;WIDTH:0.222317
G1 X111.286 Y99.437 E0.00222 ; infill
G1 X111.163 Y99.285 E0.00292 ; infill
G1 X110.194 Y99.220 F10800.000 ; move to first infill point
;WIDTH:0.128367
G1 F2400.000
G1 X110.172 Y98.846 E0.00266 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.194 Y99.220 E-0.09873 ; wipe and retract
;WIPE_END
G1 E-2.30127 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X106.928 Y99.594 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.794 Y99.802 E0.01143 ; perimeter
G1 X106.510 Y99.990 E0.01579 ; perimeter
G1 X105.699 Y100.325 E0.04065 ; perimeter
G1 X104.839 Y100.749 E0.04440 ; perimeter
G1 X104.658 Y100.814 E0.00892 ; perimeter
G1 X104.232 Y101.054 E0.02267 ; perimeter
G1 X103.826 Y101.220 E0.02033 ; perimeter
G1 X103.440 Y101.280 E0.01806 ; perimeter
G1 X102.957 Y101.518 E0.02494 ; perimeter
G1 X102.890 Y101.646 E0.00670 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.841 Y101.742 E0.00450 ; perimeter (bridge)
G1 X102.526 Y102.096 E0.01980 ; perimeter (bridge)
G1 X102.534 Y102.128 E0.00140 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.600 Y102.408 E0.01330 ; perimeter
G1 X102.456 Y102.927 E0.02497 ; perimeter
G1 X102.424 Y103.196 E0.01253 ; perimeter
G1 X102.110 Y104.166 E0.04725 ; perimeter
G1 X101.928 Y104.548 E0.01959 ; perimeter
G1 X101.814 Y104.663 E0.00754 ; perimeter
G1 X101.628 Y104.727 E0.00911 ; perimeter
G1 X101.454 Y104.688 E0.00827 ; perimeter
G1 X101.315 Y104.468 E0.01203 ; perimeter
G1 X101.263 Y104.190 E0.01310 ; perimeter
G1 X101.307 Y103.832 E0.01675 ; perimeter
G1 X101.361 Y103.668 E0.00799 ; perimeter
G1 X101.522 Y103.295 E0.01880 ; perimeter
G1 X101.683 Y103.123 E0.01090 ; perimeter
G1 X101.762 Y102.965 E0.00819 ; perimeter
G1 X101.989 Y102.761 E0.01412 ; perimeter
G1 X102.086 Y102.578 E0.00960 ; perimeter
G1 X102.215 Y102.442 E0.00867 ; perimeter
G1 X102.323 Y102.262 E0.00974 ; perimeter
G1 X102.447 Y102.156 E0.00758 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.761 Y101.678 E0.02389 ; perimeter (bridge)
G1 X102.840 Y101.523 E0.00728 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.945 Y101.357 E0.00906 ; perimeter
G1 X103.083 Y101.002 E0.01765 ; perimeter
G1 X103.111 Y100.862 E0.00662 ; perimeter
G1 X103.266 Y100.579 E0.01495 ; perimeter
G1 X103.530 Y100.401 E0.01475 ; perimeter
G1 X103.755 Y100.342 E0.01079 ; perimeter
G1 X104.719 Y99.946 E0.04825 ; perimeter
G1 X105.196 Y99.735 E0.02417 ; perimeter
G1 X105.858 Y99.400 E0.03437 ; perimeter
G1 X106.304 Y99.250 E0.02177 ; perimeter
G1 X106.763 Y99.256 E0.02130 ; perimeter
G1 X106.886 Y99.335 E0.00674 ; perimeter
G1 X106.957 Y99.471 E0.00713 ; perimeter
G1 X106.942 Y99.536 E0.00308 ; perimeter
G1 X106.686 Y99.642 F10800.000 ; move inwards before travel
G1 X106.641 Y99.495 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.331405
G1 F2400.000
G1 X106.328 Y99.648 E0.00836 ; infill
G1 X106.012 Y99.767 E0.00811 ; infill
G1 X105.549 Y99.979 E0.01221 ; infill
;WIDTH:0.315013
G1 X103.878 Y100.744 E0.04159 ; infill
;WIDTH:0.427714
G1 X103.343 Y100.939 E0.01820 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.878 Y100.744 E-0.15010 ; wipe and retract
;WIPE_END
G1 E-2.24990 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 X102.072 Y103.011 ; move to first infill point
G1 Z7.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.426972
G1 F2400.000
G1 X101.767 Y103.822 E0.02766 ; infill
G1 X101.714 Y104.008 E0.00619 ; infill
;WIDTH:0.411925
G1 X101.650 Y104.227 E0.00700 ; infill
;WIDTH:0.383692
G1 X101.586 Y104.446 E0.00646 ; infill
;LAYER_CHANGE
;Z:7.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;7.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.650 Y104.227 E-0.06018 ; wipe and retract
;WIPE_END
G1 E-2.33982 F2400.000 ; retract
G1 Z7.075 F10800.000 ; lift Z
G1 Z7.200 ; move to next layer (35)
;AFTER_LAYER_CHANGE
;7.2
G1 Z7.275 ; lift Z
G1 X106.699 Y115.436 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.959 Y115.339 E0.01285 ; perimeter
G1 X107.436 Y115.329 E0.02213 ; perimeter
G1 X107.889 Y115.385 E0.02113 ; perimeter
G1 X108.527 Y115.541 E0.03041 ; perimeter
G1 X108.828 Y115.709 E0.01597 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.864 Y115.742 E0.00205 ; perimeter (bridge)
G1 X108.834 Y115.822 E0.00356 ; perimeter (bridge)
G1 X108.804 Y115.841 E0.00149 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.617 Y115.959 E0.01023 ; perimeter
G1 X108.234 Y116.091 E0.01877 ; perimeter
G1 X107.826 Y116.165 E0.01920 ; perimeter
G1 X107.594 Y116.173 E0.01079 ; perimeter
G1 X106.862 Y116.104 E0.03404 ; perimeter
G1 X106.776 Y116.042 E0.00491 ; perimeter
G1 X106.638 Y115.894 E0.00937 ; perimeter
G1 X106.553 Y115.715 E0.00920 ; perimeter
G1 X106.591 Y115.556 E0.00756 ; perimeter
G1 X106.659 Y115.481 E0.00469 ; perimeter
G1 X106.949 Y115.556 F10800.000 ; move inwards before travel
G1 X106.838 Y115.754 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3418
G1 F2400.000
G1 X107.033 Y115.728 E0.00490 ; infill
;WIDTH:0.351957
G1 X107.785 Y115.771 E0.01934 ; infill
G1 X108.366 Y115.755 E0.01494 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.785 Y115.771 E-0.15345 ; wipe and retract
G1 X107.033 Y115.728 E-0.19862 ; wipe and retract
;WIPE_END
G1 E-2.04793 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X114.677 Y115.174 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.717 Y115.102 E0.00383 ; perimeter
G1 X114.811 Y115.014 E0.00596 ; perimeter
G1 X114.895 Y114.974 E0.00430 ; perimeter
G1 X115.199 Y114.950 E0.01414 ; perimeter
G1 X115.297 Y114.987 E0.00483 ; perimeter
G1 X115.357 Y115.036 E0.00358 ; perimeter
G1 X115.454 Y115.196 E0.00868 ; perimeter
G1 X115.497 Y115.336 E0.00677 ; perimeter
G1 X115.481 Y115.430 E0.00445 ; perimeter
G1 X115.336 Y115.658 E0.01249 ; perimeter
G1 X115.227 Y115.747 E0.00653 ; perimeter
G1 X115.059 Y115.785 E0.00800 ; perimeter
G1 X114.935 Y115.738 E0.00615 ; perimeter
G1 X114.751 Y115.592 E0.01087 ; perimeter
G1 X114.671 Y115.376 E0.01067 ; perimeter
G1 X114.675 Y115.234 E0.00655 ; perimeter
G1 X114.757 Y115.154 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.717 Y115.102 E-0.03662 ; wipe and retract
G1 X114.811 Y115.014 E-0.03393 ; wipe and retract
G1 X114.895 Y114.974 E-0.02451 ; wipe and retract
G1 X115.199 Y114.950 E-0.08057 ; wipe and retract
G1 X115.297 Y114.987 E-0.02752 ; wipe and retract
G1 X115.357 Y115.036 E-0.02042 ; wipe and retract
G1 X115.454 Y115.196 E-0.04945 ; wipe and retract
G1 X115.497 Y115.336 E-0.03859 ; wipe and retract
G1 X115.481 Y115.430 E-0.02533 ; wipe and retract
G1 X115.336 Y115.658 E-0.07116 ; wipe and retract
G1 X115.227 Y115.747 E-0.03722 ; wipe and retract
G1 X115.059 Y115.785 E-0.04558 ; wipe and retract
G1 X114.935 Y115.738 E-0.03502 ; wipe and retract
G1 X114.751 Y115.592 E-0.06192 ; wipe and retract
G1 X114.671 Y115.376 E-0.06080 ; wipe and retract
G1 X114.675 Y115.234 E-0.03731 ; wipe and retract
;WIPE_END
G1 E-1.71405 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X115.558 Y110.228 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.369 Y110.207 E0.00878 ; perimeter
G1 X115.274 Y110.150 E0.00512 ; perimeter
G1 X115.204 Y110.043 E0.00593 ; perimeter
G1 X115.151 Y109.841 E0.00969 ; perimeter
G1 X115.163 Y109.674 E0.00775 ; perimeter
G1 X115.099 Y109.129 E0.02541 ; perimeter
G1 X115.112 Y108.769 E0.01669 ; perimeter
G1 X115.171 Y108.596 E0.00846 ; perimeter
G1 X115.288 Y108.395 E0.01077 ; perimeter
G1 X115.381 Y108.322 E0.00550 ; perimeter
G1 X115.501 Y108.288 E0.00579 ; perimeter
G1 X115.643 Y108.321 E0.00675 ; perimeter
G1 X115.786 Y108.453 E0.00900 ; perimeter
G1 X115.859 Y108.593 E0.00734 ; perimeter
G1 X115.913 Y108.824 E0.01096 ; perimeter
G1 X115.902 Y109.584 E0.03520 ; perimeter
G1 X115.860 Y110.000 E0.01940 ; perimeter
G1 X115.809 Y110.086 E0.00461 ; perimeter
G1 X115.714 Y110.175 E0.00605 ; perimeter
G1 X115.614 Y110.208 E0.00485 ; perimeter
G1 X115.447 Y110.074 F10800.000 ; move inwards before travel
G1 X115.524 Y109.865 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.294744
G1 F2400.000
G1 X115.530 Y109.654 E0.00442 ; infill
;WIDTH:0.309596
G1 X115.528 Y109.570 E0.00186 ; infill
;WIDTH:0.339531
G1 X115.516 Y109.341 E0.00564 ; infill
;WIDTH:0.364448
G1 X115.510 Y108.867 E0.01268 ; infill
G1 X115.480 Y108.551 E0.00848 ; infill
G1 X115.542 Y108.556 F10800.000 ; move to first infill point
;WIDTH:0.308473
G1 F2400.000
G1 X115.392 Y109.554 E0.02229 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.542 Y108.556 E-0.26639 ; wipe and retract
;WIPE_END
G1 E-2.13361 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X115.532 Y104.062 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.402 Y104.048 E0.00608 ; perimeter
G1 X115.244 Y103.945 E0.00871 ; perimeter
G1 X115.145 Y103.746 E0.01031 ; perimeter
G1 X115.118 Y103.627 E0.00564 ; perimeter
G1 X115.126 Y103.473 E0.00716 ; perimeter
G1 X115.240 Y103.310 E0.00922 ; perimeter
G1 X115.249 Y103.233 E0.00358 ; perimeter
G1 X115.413 Y103.120 E0.00925 ; perimeter
G1 X115.559 Y103.107 E0.00678 ; perimeter
G1 X115.704 Y103.163 E0.00718 ; perimeter
G1 X115.785 Y103.245 E0.00534 ; perimeter
G1 X115.852 Y103.408 E0.00819 ; perimeter
G1 X115.864 Y103.671 E0.01217 ; perimeter
G1 X115.830 Y103.828 E0.00745 ; perimeter
G1 X115.745 Y103.978 E0.00798 ; perimeter
G1 X115.673 Y104.032 E0.00418 ; perimeter
G1 X115.591 Y104.050 E0.00387 ; perimeter
G1 X115.461 Y103.952 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.402 Y104.048 E-0.04990 ; wipe and retract
G1 X115.244 Y103.945 E-0.04960 ; wipe and retract
G1 X115.145 Y103.746 E-0.05876 ; wipe and retract
G1 X115.118 Y103.627 E-0.03211 ; wipe and retract
G1 X115.126 Y103.473 E-0.04082 ; wipe and retract
G1 X115.240 Y103.310 E-0.05253 ; wipe and retract
G1 X115.249 Y103.233 E-0.02042 ; wipe and retract
G1 X115.413 Y103.120 E-0.05268 ; wipe and retract
G1 X115.559 Y103.107 E-0.03865 ; wipe and retract
G1 X115.704 Y103.163 E-0.04088 ; wipe and retract
G1 X115.785 Y103.245 E-0.03043 ; wipe and retract
G1 X115.852 Y103.408 E-0.04666 ; wipe and retract
G1 X115.864 Y103.671 E-0.06935 ; wipe and retract
G1 X115.830 Y103.828 E-0.04247 ; wipe and retract
G1 X115.745 Y103.978 E-0.04548 ; wipe and retract
G1 X115.673 Y104.032 E-0.02379 ; wipe and retract
G1 X115.591 Y104.050 E-0.02207 ; wipe and retract
;WIPE_END
G1 E-1.68342 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X110.176 Y99.069 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.768 Y99.219 E0.01472 ; perimeter
G1 X109.724 Y99.214 E0.00151 ; perimeter
G1 X109.619 Y99.065 E0.00617 ; perimeter
G1 X110.116 Y99.069 E0.01683 ; perimeter
G1 X110.455 Y99.029 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X110.866 Y98.931 E0.01430 ; perimeter
G1 X110.988 Y99.184 E0.00953 ; perimeter
G1 X110.513 Y99.046 E0.01675 ; perimeter
G1 X110.378 Y99.508 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.123 Y99.614 E0.01277 ; perimeter
G1 X109.812 Y99.710 E0.01509 ; perimeter
G1 X109.538 Y99.677 E0.01278 ; perimeter
G1 X109.456 Y99.639 E0.00421 ; perimeter
G1 X109.317 Y99.481 E0.00972 ; perimeter
G1 X109.117 Y99.181 E0.01671 ; perimeter
G1 X109.038 Y98.892 E0.01386 ; perimeter
G1 X109.053 Y98.744 E0.00691 ; perimeter
G1 X109.137 Y98.664 E0.00537 ; perimeter
G1 X109.422 Y98.582 E0.01373 ; perimeter
G1 X110.229 Y98.587 E0.03741 ; perimeter
G1 X110.852 Y98.438 E0.02967 ; perimeter
G1 X110.956 Y98.430 E0.00484 ; perimeter
G1 X111.126 Y98.474 E0.00810 ; perimeter
G1 X111.284 Y98.669 E0.01165 ; perimeter
G1 X111.374 Y98.889 E0.01099 ; perimeter
G1 X111.488 Y99.004 E0.00749 ; perimeter
G1 X111.645 Y99.282 E0.01480 ; perimeter
G1 X111.918 Y99.491 E0.01591 ; perimeter
G1 X112.139 Y99.741 E0.01548 ; perimeter
G1 X112.314 Y99.884 E0.01045 ; perimeter
G1 X112.497 Y100.092 E0.01285 ; perimeter
G1 X113.046 Y100.444 E0.03021 ; perimeter
G1 X113.264 Y100.374 E0.01062 ; perimeter
G1 X113.399 Y100.395 E0.00630 ; perimeter
G1 X113.567 Y100.287 E0.00927 ; perimeter
G1 X113.714 Y100.295 E0.00682 ; perimeter
G1 X113.827 Y100.175 E0.00764 ; perimeter
G1 X114.000 Y100.159 E0.00806 ; perimeter
G1 X114.050 Y100.112 E0.00317 ; perimeter
G1 X114.234 Y100.193 E0.00934 ; perimeter
G1 X114.427 Y100.485 E0.01621 ; perimeter
G1 X114.508 Y100.685 E0.01001 ; perimeter
G1 X114.519 Y100.792 E0.00495 ; perimeter
G1 X114.413 Y100.973 E0.00969 ; perimeter
G1 X114.362 Y100.981 E0.00243 ; perimeter
G1 X114.221 Y101.074 E0.00780 ; perimeter
G1 X114.064 Y101.093 E0.00732 ; perimeter
G1 X113.880 Y101.164 E0.00913 ; perimeter
G1 X113.584 Y101.222 E0.01401 ; perimeter
G1 X113.246 Y101.196 E0.01569 ; perimeter
G1 X113.092 Y101.133 E0.00768 ; perimeter
G1 X112.661 Y100.891 E0.02294 ; perimeter
G1 X112.219 Y100.567 E0.02536 ; perimeter
G1 X112.027 Y100.470 E0.00996 ; perimeter
G1 X111.442 Y100.044 E0.03356 ; perimeter
G1 X110.818 Y99.637 E0.03450 ; perimeter
G1 X110.436 Y99.525 E0.01845 ; perimeter
G1 X110.215 Y99.286 F10800.000 ; move inwards before travel
G1 X111.162 Y99.364 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314201
G1 F2400.000
G1 X111.377 Y99.552 E0.00644 ; infill
G1 X111.646 Y99.742 E0.00744 ; infill
;WIDTH:0.205668
G1 X112.188 Y100.207 E0.00966 ; infill
;WIDTH:0.109746
G1 X112.365 Y100.333 E0.00121 ; infill
;WIDTH:0.150243
G1 X112.987 Y100.746 E0.00666 ; infill
G1 X113.658 Y100.962 E0.00629 ; infill
G1 X114.184 Y100.554 F10800.000 ; move to first infill point
;WIDTH:0.458313
G1 F2400.000
G1 X113.981 Y100.656 E0.00782 ; infill
;WIDTH:0.446416
G1 X113.952 Y100.673 E0.00112 ; infill
;WIDTH:0.426244
G1 X113.559 Y100.796 E0.01315 ; infill
;WIDTH:0.406932
G1 X113.426 Y100.807 E0.00402 ; infill
;WIDTH:0.371808
G1 X113.295 Y100.784 E0.00363 ; infill
;WIDTH:0.361089
G1 X112.938 Y100.770 E0.00947 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.295 Y100.784 E-0.09448 ; wipe and retract
;WIPE_END
G1 E-2.30552 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X106.712 Y99.819 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.282 Y100.089 E0.02352 ; perimeter
G1 X105.800 Y100.310 E0.02456 ; perimeter
G1 X104.754 Y100.741 E0.05241 ; perimeter
G1 X104.655 Y100.799 E0.00531 ; perimeter
G1 X104.349 Y100.913 E0.01515 ; perimeter
G1 X104.053 Y101.076 E0.01565 ; perimeter
G1 X103.897 Y101.140 E0.00782 ; perimeter
G1 X103.673 Y101.193 E0.01065 ; perimeter
G1 X103.219 Y101.429 E0.02371 ; perimeter
G1 X103.131 Y101.570 E0.00767 ; perimeter
G1 X103.016 Y101.691 E0.00775 ; perimeter
G1 X102.802 Y102.203 E0.02571 ; perimeter
G1 X102.664 Y102.699 E0.02384 ; perimeter
G1 X102.384 Y103.453 E0.03725 ; perimeter
G1 X102.290 Y103.644 E0.00985 ; perimeter
G1 X102.048 Y104.425 E0.03788 ; perimeter
G1 X101.882 Y104.746 E0.01674 ; perimeter
G1 X101.750 Y104.868 E0.00835 ; perimeter
G1 X101.548 Y104.940 E0.00991 ; perimeter
G1 X101.512 Y104.946 E0.00173 ; perimeter
G1 X101.400 Y104.898 E0.00560 ; perimeter
G1 X101.327 Y104.802 E0.00561 ; perimeter
G1 X101.340 Y104.717 E0.00399 ; perimeter
G1 X101.257 Y104.351 E0.01739 ; perimeter
G1 X101.345 Y103.858 E0.02321 ; perimeter
G1 X101.685 Y103.065 E0.03995 ; perimeter
G1 X101.858 Y102.722 E0.01778 ; perimeter
G1 X102.284 Y102.019 E0.03813 ; perimeter
G1 X102.946 Y100.836 E0.06279 ; perimeter
G1 X103.153 Y100.516 E0.01766 ; perimeter
G1 X103.460 Y100.355 E0.01603 ; perimeter
G1 X104.009 Y100.260 E0.02583 ; perimeter
G1 X104.342 Y100.132 E0.01653 ; perimeter
G1 X105.720 Y99.471 E0.07076 ; perimeter
G1 X105.922 Y99.353 E0.01086 ; perimeter
G1 X106.228 Y99.255 E0.01487 ; perimeter
G1 X106.381 Y99.303 E0.00742 ; perimeter
G1 X106.621 Y99.321 E0.01116 ; perimeter
G1 X106.736 Y99.402 E0.00650 ; perimeter
G1 X106.783 Y99.542 E0.00686 ; perimeter
G1 X106.797 Y99.674 E0.00614 ; perimeter
G1 X106.737 Y99.765 E0.00502 ; perimeter
G1 X106.323 Y99.726 F10800.000 ; move inwards before travel
G1 X106.545 Y99.609 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288715
G1 F2400.000
G1 X105.584 Y99.803 E0.02002 ; infill
G1 X106.471 Y99.552 F10800.000 ; move to first infill point
;WIDTH:0.358352
G1 F2400.000
G1 X105.121 Y100.179 E0.03903 ; infill
;WIDTH:0.320264
G1 X104.600 Y100.411 E0.01316 ; infill
;WIDTH:0.288118
G1 X103.981 Y100.664 E0.01363 ; infill
;WIDTH:0.393787
G1 X103.547 Y100.787 E0.01318 ; infill
G1 X103.129 Y101.003 E0.01370 ; infill
G1 X102.590 Y102.018 F10800.000 ; move to first infill point
;WIDTH:0.105777
G1 F2400.000
G1 X102.462 Y102.304 E0.00164 ; infill
;WIDTH:0.203802
G1 X102.262 Y102.749 E0.00653 ; infill
;WIDTH:0.312452
G1 X101.921 Y103.510 E0.01868 ; infill
G1 X101.750 Y103.974 E0.01109 ; infill
G1 X101.681 Y104.274 E0.00691 ; infill
G1 X101.559 Y104.595 E0.00768 ; infill
G1 X100.541 Y105.429 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.657 Y105.687 E0.01311 ; perimeter
G1 X100.656 Y105.837 E0.00693 ; perimeter
G1 X100.606 Y105.949 E0.00569 ; perimeter
G1 X100.500 Y106.059 E0.00710 ; perimeter
G1 X100.370 Y106.111 E0.00650 ; perimeter
G1 X100.167 Y106.127 E0.00942 ; perimeter
G1 X99.961 Y106.084 E0.00974 ; perimeter
G1 X99.751 Y105.980 E0.01087 ; perimeter
G1 X99.651 Y105.901 E0.00589 ; perimeter
G1 X99.567 Y105.591 E0.01488 ; perimeter
G1 X99.595 Y105.458 E0.00631 ; perimeter
G1 X99.661 Y105.363 E0.00538 ; perimeter
G1 X99.811 Y105.286 E0.00781 ; perimeter
G1 X99.902 Y105.263 E0.00432 ; perimeter
G1 X100.188 Y105.284 E0.01330 ; perimeter
G1 X100.399 Y105.387 E0.01086 ; perimeter
G1 X100.493 Y105.397 E0.00437 ; perimeter
G1 X100.438 Y105.693 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.657 Y105.687 E-0.08797 ; wipe and retract
G1 X100.656 Y105.837 E-0.03947 ; wipe and retract
G1 X100.606 Y105.949 E-0.03242 ; wipe and retract
G1 X100.500 Y106.059 E-0.04046 ; wipe and retract
G1 X100.370 Y106.111 E-0.03701 ; wipe and retract
G1 X100.167 Y106.127 E-0.05367 ; wipe and retract
G1 X99.961 Y106.084 E-0.05546 ; wipe and retract
G1 X99.751 Y105.980 E-0.06195 ; wipe and retract
G1 X99.651 Y105.901 E-0.03355 ; wipe and retract
G1 X99.567 Y105.591 E-0.08479 ; wipe and retract
G1 X99.595 Y105.458 E-0.03592 ; wipe and retract
G1 X99.661 Y105.363 E-0.03063 ; wipe and retract
G1 X99.811 Y105.286 E-0.04450 ; wipe and retract
G1 X99.902 Y105.263 E-0.02463 ; wipe and retract
G1 X100.188 Y105.284 E-0.07577 ; wipe and retract
G1 X100.399 Y105.387 E-0.06186 ; wipe and retract
G1 X100.493 Y105.397 E-0.02489 ; wipe and retract
;WIPE_END
G1 E-1.57505 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X98.230 Y107.217 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.225 Y107.139 E0.00362 ; perimeter
G1 X98.265 Y107.059 E0.00418 ; perimeter
G1 X98.370 Y106.935 E0.00751 ; perimeter
G1 X98.514 Y106.837 E0.00807 ; perimeter
G1 X98.818 Y106.817 E0.01410 ; perimeter
G1 X99.065 Y106.908 E0.01220 ; perimeter
G1 X99.290 Y107.074 E0.01295 ; perimeter
G1 X99.417 Y107.248 E0.00998 ; perimeter
G1 X99.452 Y107.344 E0.00475 ; perimeter
G1 X99.463 Y107.460 E0.00540 ; perimeter
G1 X99.446 Y107.554 E0.00442 ; perimeter
G1 X99.385 Y107.662 E0.00577 ; perimeter
G1 X99.302 Y107.720 E0.00465 ; perimeter
G1 X99.143 Y107.760 E0.00761 ; perimeter
G1 X98.854 Y107.717 E0.01351 ; perimeter
G1 X98.650 Y107.637 E0.01016 ; perimeter
G1 X98.327 Y107.380 E0.01910 ; perimeter
G1 X98.261 Y107.269 E0.00601 ; perimeter
G1 X98.283 Y107.160 F10800.000 ; move inwards before travel
G1 X98.553 Y107.101 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.330086
G1 F2400.000
G1 X99.209 Y107.484 E0.01812 ; infill
G1 X99.206 Y107.488 F10800.000 ; move to first infill point
;WIDTH:0.156689
G1 F2400.000
G1 X99.122 Y107.419 E0.00103 ; infill
;WIDTH:0.251747
G1 X98.649 Y107.067 E0.01024 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.122 Y107.419 E-0.15556 ; wipe and retract
;WIPE_END
G1 E-2.24444 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X97.152 Y109.235 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.996 Y109.350 E0.00655 ; perimeter
G1 X97.095 Y109.232 E0.00522 ; perimeter
G1 X96.466 Y110.351 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X96.459 Y110.416 E0.00222 ; perimeter
G1 X96.522 Y110.746 E0.01137 ; perimeter
G1 X96.084 Y110.816 E0.01503 ; perimeter
G1 X96.214 Y110.695 E0.00602 ; perimeter
G1 X96.431 Y110.399 E0.01242 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.459 Y110.416 E-0.00859 ; wipe and retract
G1 X96.522 Y110.746 E-0.08865 ; wipe and retract
G1 X96.084 Y110.816 E-0.11720 ; wipe and retract
G1 X96.214 Y110.695 E-0.04690 ; wipe and retract
G1 X96.431 Y110.399 E-0.09681 ; wipe and retract
;WIPE_END
G1 E-2.04185 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X95.705 Y114.395 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.856 Y114.450 E0.00544 ; perimeter
G1 X95.977 Y114.536 E0.00501 ; perimeter
G1 X95.963 Y114.719 E0.00624 ; perimeter
G1 X95.742 Y114.442 E0.01201 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.856 Y114.450 E-0.03010 ; wipe and retract
G1 X95.977 Y114.536 E-0.03908 ; wipe and retract
G1 X95.963 Y114.719 E-0.04862 ; wipe and retract
G1 X95.742 Y114.442 E-0.09361 ; wipe and retract
;WIPE_END
G1 E-2.18859 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X95.404 Y111.568 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.181 Y111.965 E0.02113 ; perimeter
G1 X95.115 Y112.150 E0.00911 ; perimeter
G1 X95.163 Y112.368 E0.01032 ; perimeter
G1 X95.166 Y112.798 E0.01992 ; perimeter
G1 X95.209 Y113.035 E0.01117 ; perimeter
G1 X95.385 Y113.559 E0.02563 ; perimeter
G1 X95.544 Y113.668 E0.00891 ; perimeter
G1 X95.722 Y113.887 E0.01309 ; perimeter
G1 X96.082 Y114.020 E0.01777 ; perimeter
G1 X96.225 Y114.121 E0.00812 ; perimeter
G1 X96.406 Y114.186 E0.00888 ; perimeter
G1 X96.489 Y114.345 E0.00832 ; perimeter
G1 X96.445 Y114.674 E0.01540 ; perimeter
G1 X96.461 Y114.763 E0.00416 ; perimeter
G1 X96.427 Y114.886 E0.00593 ; perimeter
G1 X96.344 Y115.054 E0.00865 ; perimeter
G1 X96.205 Y115.199 E0.00934 ; perimeter
G1 X96.115 Y115.236 E0.00446 ; perimeter
G1 X95.867 Y115.227 E0.01151 ; perimeter
G1 X95.718 Y115.144 E0.00792 ; perimeter
G1 X95.609 Y115.050 E0.00665 ; perimeter
G1 X95.001 Y114.281 E0.04541 ; perimeter
G1 X94.818 Y113.908 E0.01923 ; perimeter
G1 X94.779 Y113.569 E0.01581 ; perimeter
G1 X94.788 Y112.802 E0.03557 ; perimeter
G1 X94.952 Y111.629 E0.05486 ; perimeter
G1 X95.000 Y111.471 E0.00765 ; perimeter
G1 X95.184 Y111.124 E0.01819 ; perimeter
G1 X95.682 Y110.531 E0.03587 ; perimeter
G1 X95.852 Y110.373 E0.01073 ; perimeter
G1 X96.089 Y110.050 E0.01857 ; perimeter
G1 X96.365 Y109.564 E0.02590 ; perimeter
G1 X96.555 Y109.141 E0.02149 ; perimeter
G1 X96.733 Y108.883 E0.01452 ; perimeter
G1 X96.980 Y108.744 E0.01314 ; perimeter
G1 X97.136 Y108.730 E0.00722 ; perimeter
G1 X97.299 Y108.776 E0.00787 ; perimeter
G1 X97.496 Y108.768 E0.00911 ; perimeter
G1 X98.027 Y108.915 E0.02551 ; perimeter
G1 X98.226 Y109.051 E0.01117 ; perimeter
G1 X98.271 Y109.157 E0.00534 ; perimeter
G1 X98.226 Y109.260 E0.00522 ; perimeter
G1 X98.036 Y109.436 E0.01200 ; perimeter
G1 X97.436 Y109.624 E0.02913 ; perimeter
G1 X97.279 Y109.740 E0.00900 ; perimeter
G1 X97.054 Y109.976 E0.01513 ; perimeter
G1 X96.980 Y110.104 E0.00686 ; perimeter
G1 X96.946 Y110.398 E0.01368 ; perimeter
G1 X97.047 Y110.921 E0.02470 ; perimeter
G1 X96.984 Y111.119 E0.00959 ; perimeter
G1 X96.832 Y111.214 E0.00832 ; perimeter
G1 X96.547 Y111.227 E0.01322 ; perimeter
G1 X95.926 Y111.332 E0.02918 ; perimeter
G1 X95.659 Y111.480 E0.01417 ; perimeter
G1 X95.461 Y111.548 E0.00967 ; perimeter
G1 X95.012 Y111.488 F10800.000 ; move inwards before travel
G1 X95.376 Y111.322 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.223092
G1 F2400.000
G1 X95.766 Y111.001 E0.00757 ; infill
G1 X95.939 Y111.068 E0.00278 ; infill
G1 X96.707 Y110.187 F10800.000 ; move to first infill point
;WIDTH:0.33264
G1 F2400.000
G1 X96.652 Y110.079 E0.00293 ; infill
;WIDTH:0.362471
G1 X96.596 Y109.971 E0.00323 ; infill
G1 X96.720 Y109.751 E0.00669 ; infill
;WIDTH:0.370642
G1 X96.741 Y109.717 E0.00108 ; infill
;WIDTH:0.381453
G1 X96.854 Y109.548 E0.00573 ; infill
G1 X97.417 Y109.035 F10800.000 ; move to first infill point
;WIDTH:0.104138
G1 F2400.000
G1 X97.699 Y109.106 E0.00148 ; infill
;WIDTH:0.146275
G1 X97.763 Y109.180 E0.00084 ; infill
G1 X97.446 Y109.345 E0.00307 ; infill
G1 X97.512 Y109.269 F10800.000 ; move to first infill point
;WIDTH:0.142524
G1 F2400.000
G1 X97.959 Y109.160 E0.00381 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.512 Y109.269 E-0.12148 ; wipe and retract
;WIPE_END
G1 E-2.27852 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X95.045 Y113.374 ; move to first infill point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.122825
G1 F2400.000
G1 X95.059 Y113.464 E0.00061 ; infill
;WIDTH:0.148731
G1 X95.073 Y113.554 E0.00080 ; infill
;WIDTH:0.187623
G1 X95.114 Y113.736 E0.00224 ; infill
;WIDTH:0.21598
G1 X95.134 Y113.784 E0.00075 ; infill
;WIDTH:0.242051
G1 X95.459 Y114.324 E0.01043 ; infill
G1 X95.504 Y114.262 F10800.000 ; move to first infill point
;WIDTH:0.370577
G1 F2400.000
G1 X95.345 Y114.064 E0.00691 ; infill
G1 X95.020 Y113.557 E0.01640 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.345 Y114.064 E-0.15888 ; wipe and retract
G1 X95.504 Y114.262 E-0.06695 ; wipe and retract
;WIPE_END
G1 E-2.17417 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 X98.867 Y114.891 ; move to first perimeter point
G1 Z7.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.972 Y114.963 E0.00589 ; perimeter
G1 X99.050 Y115.049 E0.00538 ; perimeter
G1 X99.131 Y115.307 E0.01253 ; perimeter
G1 X99.055 Y115.557 E0.01211 ; perimeter
G1 X98.922 Y115.698 E0.00900 ; perimeter
G1 X98.736 Y115.812 E0.01011 ; perimeter
G1 X98.467 Y115.823 E0.01245 ; perimeter
G1 X98.336 Y115.772 E0.00651 ; perimeter
G1 X98.210 Y115.611 E0.00945 ; perimeter
G1 X98.177 Y115.469 E0.00675 ; perimeter
G1 X98.204 Y115.326 E0.00674 ; perimeter
G1 X98.293 Y115.162 E0.00866 ; perimeter
G1 X98.508 Y114.968 E0.01338 ; perimeter
G1 X98.771 Y114.876 E0.01291 ; perimeter
G1 X98.808 Y114.882 E0.00174 ; perimeter
G1 X98.892 Y115.015 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:7.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;7.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.972 Y114.963 E-0.04830 ; wipe and retract
G1 X99.050 Y115.049 E-0.03063 ; wipe and retract
G1 X99.131 Y115.307 E-0.07136 ; wipe and retract
G1 X99.055 Y115.557 E-0.06901 ; wipe and retract
G1 X98.922 Y115.698 E-0.05125 ; wipe and retract
G1 X98.736 Y115.812 E-0.05761 ; wipe and retract
G1 X98.467 Y115.823 E-0.07093 ; wipe and retract
G1 X98.336 Y115.772 E-0.03711 ; wipe and retract
G1 X98.210 Y115.611 E-0.05385 ; wipe and retract
G1 X98.177 Y115.469 E-0.03846 ; wipe and retract
G1 X98.204 Y115.326 E-0.03842 ; wipe and retract
G1 X98.293 Y115.162 E-0.04936 ; wipe and retract
G1 X98.508 Y114.968 E-0.07622 ; wipe and retract
G1 X98.771 Y114.876 E-0.07353 ; wipe and retract
G1 X98.808 Y114.882 E-0.00992 ; wipe and retract
;WIPE_END
G1 E-1.62404 F2400.000 ; retract
G1 Z7.275 F10800.000 ; lift Z
G1 Z7.400 ; move to next layer (36)
;AFTER_LAYER_CHANGE
;7.4
G1 Z7.475 ; lift Z
G1 X103.301 Y100.870 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.348 Y100.784 E0.00330 ; perimeter
G1 X103.442 Y100.798 E0.00323 ; perimeter
G1 X103.354 Y100.843 E0.00332 ; perimeter
G1 X103.298 Y101.412 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.049 Y101.823 E0.02226 ; perimeter
G1 X102.850 Y102.287 E0.02336 ; perimeter
G1 X102.712 Y102.704 E0.02037 ; perimeter
G1 X102.511 Y103.169 E0.02346 ; perimeter
G1 X102.231 Y103.730 E0.02904 ; perimeter
G1 X102.055 Y104.342 E0.02949 ; perimeter
G1 X101.998 Y104.631 E0.01366 ; perimeter
G1 X101.844 Y104.937 E0.01589 ; perimeter
G1 X101.726 Y105.054 E0.00770 ; perimeter
G1 X101.521 Y105.140 E0.01030 ; perimeter
G1 X101.117 Y105.207 E0.01896 ; perimeter
G1 X100.804 Y105.658 E0.02542 ; perimeter
G1 X100.807 Y105.877 E0.01017 ; perimeter
G1 X100.719 Y106.026 E0.00800 ; perimeter
G1 X100.629 Y106.120 E0.00603 ; perimeter
G1 X100.460 Y106.178 E0.00828 ; perimeter
G1 X100.302 Y106.187 E0.00730 ; perimeter
G1 X100.124 Y106.151 E0.00841 ; perimeter
G1 X99.885 Y106.028 E0.01247 ; perimeter
G1 X99.780 Y105.941 E0.00632 ; perimeter
G1 X99.719 Y105.786 E0.00774 ; perimeter
G1 X99.699 Y105.639 E0.00686 ; perimeter
G1 X99.731 Y105.498 E0.00668 ; perimeter
G1 X99.832 Y105.385 E0.00704 ; perimeter
G1 X100.021 Y105.319 E0.00929 ; perimeter
G1 X100.306 Y105.329 E0.01319 ; perimeter
G1 X100.344 Y105.347 E0.00197 ; perimeter
G1 X100.910 Y105.396 E0.02632 ; perimeter
G1 X101.201 Y105.022 E0.02196 ; perimeter
G1 X101.270 Y104.605 E0.01958 ; perimeter
G1 X101.245 Y104.496 E0.00518 ; perimeter
G1 X101.310 Y104.256 E0.01149 ; perimeter
G1 X101.344 Y104.036 E0.01033 ; perimeter
G1 X101.446 Y103.861 E0.00939 ; perimeter
G1 X101.517 Y103.619 E0.01167 ; perimeter
G1 X101.669 Y103.265 E0.01784 ; perimeter
G1 X101.712 Y102.950 E0.01471 ; perimeter
G1 X102.637 Y101.092 E0.09615 ; perimeter
G1 X102.834 Y100.744 E0.01856 ; perimeter
G1 X102.872 Y100.633 E0.00541 ; perimeter
G1 X103.074 Y100.347 E0.01623 ; perimeter
G1 X103.239 Y100.264 E0.00858 ; perimeter
G1 X103.301 Y100.290 E0.00307 ; perimeter
G1 X103.695 Y100.349 E0.01849 ; perimeter
G1 X104.189 Y100.280 E0.02309 ; perimeter
G1 X104.852 Y99.963 E0.03402 ; perimeter
G1 X105.047 Y99.831 E0.01091 ; perimeter
G1 X105.567 Y99.555 E0.02727 ; perimeter
G1 X105.867 Y99.359 E0.01661 ; perimeter
G1 X106.191 Y99.232 E0.01609 ; perimeter
G1 X106.251 Y99.227 E0.00280 ; perimeter
G1 X106.531 Y99.312 E0.01355 ; perimeter
G1 X106.656 Y99.418 E0.00760 ; perimeter
G1 X106.718 Y99.545 E0.00655 ; perimeter
G1 X106.671 Y99.807 E0.01230 ; perimeter
G1 X106.391 Y100.015 E0.01616 ; perimeter
G1 X106.111 Y100.159 E0.01456 ; perimeter
G1 X105.475 Y100.405 E0.03162 ; perimeter
G1 X104.841 Y100.619 E0.03099 ; perimeter
G1 X104.416 Y100.799 E0.02138 ; perimeter
G1 X103.885 Y101.089 E0.02803 ; perimeter
G1 X103.789 Y101.163 E0.00559 ; perimeter
G1 X103.351 Y101.385 E0.02275 ; perimeter
G1 X102.905 Y101.335 F10800.000 ; move inwards before travel
G1 X102.850 Y101.463 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273543
G1 F2400.000
G1 X102.743 Y101.658 E0.00426 ; infill
;WIDTH:0.255454
G1 X102.344 Y102.564 E0.01749 ; infill
;WIDTH:0.373327
G1 X102.105 Y103.072 E0.01542 ; infill
G1 X102.063 Y103.209 E0.00395 ; infill
;WIDTH:0.326361
G1 X102.020 Y103.346 E0.00339 ; infill
;WIDTH:0.279554
G1 X101.908 Y103.593 E0.00534 ; infill
;WIDTH:0.260106
G1 X101.709 Y104.166 E0.01095 ; infill
G1 X101.622 Y104.615 E0.00826 ; infill
G1 X101.533 Y104.873 E0.00493 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.622 Y104.615 E-0.07205 ; wipe and retract
G1 X101.709 Y104.166 E-0.12070 ; wipe and retract
G1 X101.908 Y103.593 E-0.15994 ; wipe and retract
;WIPE_END
G1 E-2.04731 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X103.678 Y100.751 ; move to first infill point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.261404
G1 F2400.000
G1 X103.972 Y100.654 E0.00562 ; infill
;WIDTH:0.12711
G1 X104.294 Y100.543 E0.00239 ; infill
;WIDTH:0.149487
G1 X104.738 Y100.343 E0.00431 ; infill
;WIDTH:0.185693
G1 X105.012 Y100.232 E0.00351 ; infill
;WIDTH:0.21748
G1 X105.118 Y100.179 E0.00172 ; infill
;WIDTH:0.249269
G1 X105.225 Y100.126 E0.00204 ; infill
;WIDTH:0.272105
G1 X105.353 Y100.071 E0.00268 ; infill
;WIDTH:0.298339
G1 X105.555 Y99.979 E0.00470 ; infill
;WIDTH:0.326644
G1 X105.767 Y99.881 E0.00552 ; infill
;WIDTH:0.368323
G1 X105.945 Y99.790 E0.00543 ; infill
;WIDTH:0.37648
G1 X106.417 Y99.532 E0.01491 ; infill
G1 X106.463 Y99.615 F10800.000 ; move to first infill point
;WIDTH:0.215848
G1 F2400.000
G1 X106.374 Y99.609 E0.00127 ; infill
G1 X105.771 Y99.709 E0.00880 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.374 Y99.609 E-0.16149 ; wipe and retract
G1 X106.463 Y99.615 E-0.02336 ; wipe and retract
;WIPE_END
G1 E-2.21516 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X109.707 Y99.237 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.715 Y99.152 E0.00288 ; perimeter
G1 X110.356 Y99.112 E0.02174 ; perimeter
G1 X109.918 Y99.292 E0.01601 ; perimeter
G1 X109.788 Y99.365 E0.00505 ; perimeter
G1 X109.739 Y99.288 E0.00309 ; perimeter
G1 X110.585 Y99.098 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X110.823 Y99.084 E0.00808 ; perimeter
G1 X110.891 Y99.150 E0.00321 ; perimeter
G1 X110.644 Y99.108 E0.00847 ; perimeter
G1 X110.502 Y99.573 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.128 Y99.727 E0.01875 ; perimeter
G1 X109.897 Y99.856 E0.01225 ; perimeter
G1 X109.781 Y99.877 E0.00547 ; perimeter
G1 X109.609 Y99.842 E0.00813 ; perimeter
G1 X109.519 Y99.781 E0.00504 ; perimeter
G1 X109.401 Y99.657 E0.00792 ; perimeter
G1 X109.224 Y99.372 E0.01555 ; perimeter
G1 X109.236 Y99.090 E0.01306 ; perimeter
G1 X109.186 Y98.924 E0.00805 ; perimeter
G1 X109.231 Y98.808 E0.00577 ; perimeter
G1 X109.323 Y98.752 E0.00500 ; perimeter
G1 X109.578 Y98.677 E0.01231 ; perimeter
G1 X110.922 Y98.595 E0.06236 ; perimeter
G1 X111.063 Y98.643 E0.00690 ; perimeter
G1 X111.602 Y99.175 E0.03507 ; perimeter
G1 X111.669 Y99.294 E0.00633 ; perimeter
G1 X111.912 Y99.456 E0.01353 ; perimeter
G1 X112.667 Y100.124 E0.04669 ; perimeter
G1 X113.092 Y100.344 E0.02218 ; perimeter
G1 X113.510 Y100.411 E0.01959 ; perimeter
G1 X113.562 Y100.377 E0.00287 ; perimeter
G1 X113.876 Y100.393 E0.01458 ; perimeter
G1 X113.889 Y100.380 E0.00087 ; perimeter
G1 X114.114 Y100.466 E0.01117 ; perimeter
G1 X114.289 Y100.752 E0.01550 ; perimeter
G1 X114.282 Y100.826 E0.00343 ; perimeter
G1 X114.210 Y100.933 E0.00598 ; perimeter
G1 X114.024 Y101.066 E0.01061 ; perimeter
G1 X113.566 Y101.240 E0.02268 ; perimeter
G1 X113.429 Y101.278 E0.00657 ; perimeter
G1 X113.275 Y101.266 E0.00716 ; perimeter
G1 X113.187 Y101.312 E0.00460 ; perimeter
G1 X112.977 Y101.222 E0.01058 ; perimeter
G1 X112.515 Y100.950 E0.02483 ; perimeter
G1 X110.875 Y99.637 E0.09734 ; perimeter
G1 X110.562 Y99.583 E0.01471 ; perimeter
G1 X110.282 Y99.239 F10800.000 ; move inwards before travel
G1 X111.099 Y99.273 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301461
G1 F2400.000
G1 X111.411 Y99.578 E0.00939 ; infill
G1 X111.671 Y99.769 E0.00694 ; infill
G1 X112.470 Y100.439 E0.02242 ; infill
;WIDTH:0.333852
G1 X112.608 Y100.528 E0.00396 ; infill
;WIDTH:0.366244
G1 X112.745 Y100.617 E0.00440 ; infill
;WIDTH:0.378741
G1 X112.939 Y100.725 E0.00620 ; infill
;WIDTH:0.390487
G1 X112.989 Y100.747 E0.00157 ; infill
;WIDTH:0.427786
G1 X113.083 Y100.781 E0.00321 ; infill
;WIDTH:0.465084
G1 X113.177 Y100.815 E0.00352 ; infill
G1 X113.025 Y100.970 F10800.000 ; move to first infill point
;WIDTH:0.351227
G1 F2400.000
G1 X113.645 Y100.791 E0.01655 ; infill
G1 X113.911 Y100.656 E0.00766 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.645 Y100.791 E-0.07881 ; wipe and retract
G1 X113.025 Y100.970 E-0.17032 ; wipe and retract
;WIPE_END
G1 E-2.15087 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X115.402 Y103.185 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.495 Y103.180 E0.00430 ; perimeter
G1 X115.706 Y103.234 E0.01009 ; perimeter
G1 X115.778 Y103.311 E0.00491 ; perimeter
G1 X115.843 Y103.451 E0.00713 ; perimeter
G1 X115.859 Y103.833 E0.01770 ; perimeter
G1 X115.752 Y104.077 E0.01233 ; perimeter
G1 X115.664 Y104.140 E0.00504 ; perimeter
G1 X115.482 Y104.175 E0.00858 ; perimeter
G1 X115.336 Y104.129 E0.00708 ; perimeter
G1 X115.233 Y104.043 E0.00622 ; perimeter
G1 X115.108 Y103.771 E0.01384 ; perimeter
G1 X115.085 Y103.643 E0.00604 ; perimeter
G1 X115.112 Y103.479 E0.00773 ; perimeter
G1 X115.219 Y103.323 E0.00872 ; perimeter
G1 X115.354 Y103.221 E0.00788 ; perimeter
G1 X115.470 Y103.248 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.495 Y103.180 E-0.03865 ; wipe and retract
G1 X115.706 Y103.234 E-0.05747 ; wipe and retract
G1 X115.778 Y103.311 E-0.02799 ; wipe and retract
G1 X115.843 Y103.451 E-0.04060 ; wipe and retract
G1 X115.859 Y103.833 E-0.10086 ; wipe and retract
G1 X115.752 Y104.077 E-0.07025 ; wipe and retract
G1 X115.664 Y104.140 E-0.02873 ; wipe and retract
G1 X115.482 Y104.175 E-0.04891 ; wipe and retract
G1 X115.336 Y104.129 E-0.04031 ; wipe and retract
G1 X115.233 Y104.043 E-0.03541 ; wipe and retract
G1 X115.108 Y103.771 E-0.07885 ; wipe and retract
G1 X115.085 Y103.643 E-0.03439 ; wipe and retract
G1 X115.112 Y103.479 E-0.04404 ; wipe and retract
G1 X115.219 Y103.323 E-0.04970 ; wipe and retract
G1 X115.354 Y103.221 E-0.04486 ; wipe and retract
;WIPE_END
G1 E-1.65896 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X115.349 Y108.162 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.463 Y108.109 E0.00582 ; perimeter
G1 X115.576 Y108.115 E0.00523 ; perimeter
G1 X115.651 Y108.142 E0.00369 ; perimeter
G1 X115.775 Y108.256 E0.00780 ; perimeter
G1 X115.869 Y108.436 E0.00942 ; perimeter
G1 X115.906 Y108.610 E0.00825 ; perimeter
G1 X115.878 Y109.949 E0.06202 ; perimeter
G1 X115.863 Y110.040 E0.00430 ; perimeter
G1 X115.798 Y110.162 E0.00640 ; perimeter
G1 X115.716 Y110.241 E0.00527 ; perimeter
G1 X115.551 Y110.304 E0.00819 ; perimeter
G1 X115.410 Y110.291 E0.00654 ; perimeter
G1 X115.280 Y110.218 E0.00694 ; perimeter
G1 X115.195 Y110.073 E0.00777 ; perimeter
G1 X115.150 Y109.844 E0.01080 ; perimeter
G1 X115.172 Y109.532 E0.01452 ; perimeter
G1 X115.100 Y108.939 E0.02766 ; perimeter
G1 X115.112 Y108.608 E0.01534 ; perimeter
G1 X115.172 Y108.411 E0.00953 ; perimeter
G1 X115.302 Y108.199 E0.01153 ; perimeter
G1 X115.465 Y108.211 F10800.000 ; move inwards before travel
G1 X115.554 Y108.380 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35588
G1 F2400.000
G1 X115.507 Y108.675 E0.00776 ; infill
G1 X115.515 Y109.216 E0.01410 ; infill
;WIDTH:0.317822
G1 X115.530 Y109.511 E0.00674 ; infill
;WIDTH:0.275638
G1 X115.525 Y109.925 E0.00801 ; infill
;WIDTH:0.265559
G1 X115.521 Y109.950 E0.00047 ; infill
;WIDTH:0.248717
G1 X115.513 Y109.981 E0.00055 ; infill
;WIDTH:0.202294
G1 X115.509 Y110.062 E0.00108 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.513 Y109.981 E-0.02143 ; wipe and retract
;WIPE_END
G1 E-2.37857 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X115.200 Y114.945 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.299 Y114.983 E0.00489 ; perimeter
G1 X115.359 Y115.032 E0.00359 ; perimeter
G1 X115.454 Y115.191 E0.00858 ; perimeter
G1 X115.498 Y115.343 E0.00737 ; perimeter
G1 X115.484 Y115.431 E0.00410 ; perimeter
G1 X115.339 Y115.653 E0.01230 ; perimeter
G1 X115.225 Y115.748 E0.00686 ; perimeter
G1 X115.056 Y115.787 E0.00803 ; perimeter
G1 X114.933 Y115.741 E0.00609 ; perimeter
G1 X114.756 Y115.598 E0.01051 ; perimeter
G1 X114.668 Y115.363 E0.01164 ; perimeter
G1 X114.671 Y115.176 E0.00864 ; perimeter
G1 X114.710 Y115.105 E0.00379 ; perimeter
G1 X114.809 Y115.012 E0.00627 ; perimeter
G1 X114.896 Y114.970 E0.00445 ; perimeter
G1 X115.140 Y114.946 E0.01139 ; perimeter
G1 X115.235 Y115.044 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.299 Y114.983 E-0.04295 ; wipe and retract
G1 X115.359 Y115.032 E-0.02044 ; wipe and retract
G1 X115.454 Y115.191 E-0.04888 ; wipe and retract
G1 X115.498 Y115.343 E-0.04197 ; wipe and retract
G1 X115.484 Y115.431 E-0.02335 ; wipe and retract
G1 X115.339 Y115.653 E-0.07009 ; wipe and retract
G1 X115.225 Y115.748 E-0.03909 ; wipe and retract
G1 X115.056 Y115.787 E-0.04575 ; wipe and retract
G1 X114.933 Y115.741 E-0.03470 ; wipe and retract
G1 X114.756 Y115.598 E-0.05987 ; wipe and retract
G1 X114.668 Y115.363 E-0.06632 ; wipe and retract
G1 X114.671 Y115.176 E-0.04921 ; wipe and retract
G1 X114.710 Y115.105 E-0.02158 ; wipe and retract
G1 X114.809 Y115.012 E-0.03573 ; wipe and retract
G1 X114.896 Y114.970 E-0.02534 ; wipe and retract
G1 X115.140 Y114.946 E-0.06489 ; wipe and retract
;WIPE_END
G1 E-1.70984 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X106.579 Y115.478 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.736 Y115.359 E0.00915 ; perimeter
G1 X106.921 Y115.296 E0.00902 ; perimeter
G1 X107.351 Y115.300 E0.01995 ; perimeter
G1 X108.113 Y115.387 E0.03550 ; perimeter
G1 X108.352 Y115.393 E0.01107 ; perimeter
G1 X108.902 Y115.499 E0.02597 ; perimeter
G1 X109.163 Y115.579 E0.01264 ; perimeter
G1 X109.385 Y115.726 E0.01235 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.398 Y115.771 E0.00195 ; perimeter (bridge)
G1 X109.383 Y115.786 E0.00086 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.206 Y115.930 E0.01059 ; perimeter
G1 X109.033 Y116.007 E0.00875 ; perimeter
G1 X108.439 Y116.140 E0.02820 ; perimeter
G1 X108.155 Y116.169 E0.01324 ; perimeter
G1 X107.841 Y116.170 E0.01453 ; perimeter
G1 X106.949 Y116.081 E0.04151 ; perimeter
G1 X106.822 Y116.005 E0.00688 ; perimeter
G1 X106.777 Y115.950 E0.00328 ; perimeter
G1 X106.657 Y115.869 E0.00671 ; perimeter
G1 X106.563 Y115.653 E0.01092 ; perimeter
G1 X106.580 Y115.538 E0.00537 ; perimeter
G1 X106.777 Y115.483 F10800.000 ; move inwards before travel
G1 X106.814 Y115.616 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.171347
G1 F2400.000
G1 X106.881 Y115.632 E0.00074 ; infill
;WIDTH:0.218288
G1 X107.506 Y115.894 E0.00988 ; infill
G1 X107.083 Y115.695 F10800.000 ; move to first infill point
;WIDTH:0.319898
G1 F2400.000
G1 X107.860 Y115.765 E0.01798 ; infill
G1 X108.870 Y115.797 E0.02326 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.860 Y115.765 E-0.26656 ; wipe and retract
G1 X107.083 Y115.695 E-0.20605 ; wipe and retract
;WIPE_END
G1 E-1.92739 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X99.170 Y115.280 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.116 Y115.444 E0.00796 ; perimeter
G1 X98.956 Y115.625 E0.01122 ; perimeter
G1 X98.761 Y115.724 E0.01011 ; perimeter
G1 X98.592 Y115.739 E0.00787 ; perimeter
G1 X98.412 Y115.684 E0.00871 ; perimeter
G1 X98.299 Y115.547 E0.00822 ; perimeter
G1 X98.271 Y115.449 E0.00474 ; perimeter
G1 X98.273 Y115.287 E0.00749 ; perimeter
G1 X98.361 Y115.067 E0.01097 ; perimeter
G1 X98.543 Y114.885 E0.01193 ; perimeter
G1 X98.647 Y114.822 E0.00564 ; perimeter
G1 X98.782 Y114.778 E0.00660 ; perimeter
G1 X98.927 Y114.792 E0.00673 ; perimeter
G1 X99.024 Y114.839 E0.00500 ; perimeter
G1 X99.114 Y114.947 E0.00649 ; perimeter
G1 X99.181 Y115.148 E0.00981 ; perimeter
G1 X99.175 Y115.221 E0.00340 ; perimeter
G1 X99.010 Y115.342 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.116 Y115.444 E-0.06086 ; wipe and retract
G1 X98.956 Y115.625 E-0.06393 ; wipe and retract
G1 X98.761 Y115.724 E-0.05757 ; wipe and retract
G1 X98.592 Y115.739 E-0.04481 ; wipe and retract
G1 X98.412 Y115.684 E-0.04960 ; wipe and retract
G1 X98.299 Y115.547 E-0.04684 ; wipe and retract
G1 X98.271 Y115.449 E-0.02702 ; wipe and retract
G1 X98.273 Y115.287 E-0.04270 ; wipe and retract
G1 X98.361 Y115.067 E-0.06251 ; wipe and retract
G1 X98.543 Y114.885 E-0.06795 ; wipe and retract
G1 X98.647 Y114.822 E-0.03212 ; wipe and retract
G1 X98.782 Y114.778 E-0.03760 ; wipe and retract
G1 X98.927 Y114.792 E-0.03837 ; wipe and retract
G1 X99.024 Y114.839 E-0.02851 ; wipe and retract
G1 X99.114 Y114.947 E-0.03699 ; wipe and retract
G1 X99.181 Y115.148 E-0.05587 ; wipe and retract
G1 X99.175 Y115.221 E-0.01935 ; wipe and retract
;WIPE_END
G1 E-1.62740 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X96.047 Y114.527 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X95.995 Y114.600 E0.00307 ; perimeter
G1 X95.946 Y114.621 E0.00178 ; perimeter
G1 X95.800 Y114.431 E0.00810 ; perimeter
G1 X95.991 Y114.505 E0.00694 ; perimeter
G1 X96.164 Y114.055 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.484 Y113.987 E0.01514 ; perimeter
G1 X96.690 Y114.071 E0.01029 ; perimeter
G1 X96.754 Y114.183 E0.00598 ; perimeter
G1 X96.623 Y114.547 E0.01794 ; perimeter
G1 X96.356 Y114.924 E0.02140 ; perimeter
G1 X96.136 Y115.108 E0.01327 ; perimeter
G1 X95.815 Y115.100 E0.01488 ; perimeter
G1 X95.699 Y115.045 E0.00594 ; perimeter
G1 X95.565 Y114.928 E0.00824 ; perimeter
G1 X95.150 Y114.344 E0.03319 ; perimeter
G1 X95.028 Y114.043 E0.01503 ; perimeter
G1 X94.974 Y113.736 E0.01441 ; perimeter
G1 X95.017 Y113.366 E0.01728 ; perimeter
G1 X95.031 Y113.350 E0.00099 ; perimeter
G1 X95.086 Y113.401 E0.00346 ; perimeter
G1 X95.238 Y113.665 E0.01415 ; perimeter
G1 X95.389 Y113.703 E0.00719 ; perimeter
G1 X95.728 Y113.935 E0.01903 ; perimeter
G1 X95.838 Y113.930 E0.00513 ; perimeter
G1 X96.108 Y114.034 E0.01340 ; perimeter
G1 X96.342 Y114.330 F10800.000 ; move inwards before travel
G1 X95.591 Y114.308 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.289371
G1 F2400.000
G1 X95.478 Y114.199 E0.00322 ; infill
;WIDTH:0.278143
G1 X95.255 Y113.942 E0.00664 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X95.478 Y114.199 E-0.08960 ; wipe and retract
;WIPE_END
G1 E-2.31040 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X96.252 Y110.762 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.490 Y110.401 E0.01464 ; perimeter
G1 X96.562 Y110.766 E0.01257 ; perimeter
G1 X96.525 Y110.748 E0.00139 ; perimeter
G1 X96.312 Y110.759 E0.00722 ; perimeter
G1 X96.979 Y109.960 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.944 Y110.214 E0.01191 ; perimeter
G1 X97.038 Y110.688 E0.02237 ; perimeter
G1 X97.202 Y110.842 E0.01044 ; perimeter
G1 X97.222 Y110.965 E0.00574 ; perimeter
G1 X97.286 Y111.078 E0.00602 ; perimeter
G1 X97.255 Y111.205 E0.00604 ; perimeter
G1 X97.216 Y111.245 E0.00261 ; perimeter
G1 X97.109 Y111.272 E0.00506 ; perimeter
G1 X97.027 Y111.329 E0.00464 ; perimeter
G1 X96.853 Y111.341 E0.00810 ; perimeter
G1 X96.511 Y111.279 E0.01606 ; perimeter
G1 X96.424 Y111.236 E0.00451 ; perimeter
G1 X95.672 Y111.277 E0.03487 ; perimeter
G1 X95.419 Y111.371 E0.01253 ; perimeter
G1 X95.375 Y111.363 E0.00206 ; perimeter
G1 X95.366 Y111.315 E0.00228 ; perimeter
G1 X95.501 Y110.967 E0.01726 ; perimeter
G1 X95.595 Y110.803 E0.00878 ; perimeter
G1 X95.913 Y110.415 E0.02322 ; perimeter
G1 X96.505 Y109.467 E0.05176 ; perimeter
G1 X96.729 Y109.147 E0.01812 ; perimeter
G1 X96.755 Y109.082 E0.00324 ; perimeter
G1 X96.927 Y108.926 E0.01077 ; perimeter
G1 X97.139 Y108.820 E0.01098 ; perimeter
G1 X97.228 Y108.825 E0.00414 ; perimeter
G1 X97.581 Y108.773 E0.01652 ; perimeter
G1 X97.923 Y108.796 E0.01588 ; perimeter
G1 X98.354 Y108.918 E0.02077 ; perimeter
G1 X98.497 Y109.026 E0.00829 ; perimeter
G1 X98.546 Y109.159 E0.00657 ; perimeter
G1 X98.490 Y109.284 E0.00634 ; perimeter
G1 X98.297 Y109.448 E0.01173 ; perimeter
G1 X97.840 Y109.593 E0.02220 ; perimeter
G1 X97.706 Y109.619 E0.00635 ; perimeter
G1 X97.343 Y109.637 E0.01682 ; perimeter
G1 X97.024 Y109.920 E0.01974 ; perimeter
G1 X96.722 Y109.974 F10800.000 ; move inwards before travel
G1 X96.692 Y109.957 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.134272
G1 F2400.000
G1 X96.696 Y110.084 E0.00097 ; infill
G1 X96.692 Y109.957 F10800.000 ; move to first infill point
;WIDTH:0.171625
G1 F2400.000
G1 X96.689 Y109.830 E0.00136 ; infill
;WIDTH:0.212809
G1 X96.698 Y109.773 E0.00082 ; infill
;WIDTH:0.255382
G1 X96.794 Y109.659 E0.00263 ; infill
;WIDTH:0.303672
G1 X96.932 Y109.505 E0.00449 ; infill
;WIDTH:0.351961
G1 X97.070 Y109.350 E0.00532 ; infill
;WIDTH:0.368352
G1 X97.138 Y109.279 E0.00268 ; infill
;WIDTH:0.375533
G1 X97.212 Y109.235 E0.00236 ; infill
G1 X98.233 Y109.135 E0.02840 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.212 Y109.235 E-0.27093 ; wipe and retract
G1 X97.138 Y109.279 E-0.02249 ; wipe and retract
;WIPE_END
G1 E-2.10657 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 X98.431 Y107.138 ; move to first perimeter point
G1 Z7.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.507 Y107.022 E0.00644 ; perimeter
G1 X98.646 Y106.927 E0.00779 ; perimeter
G1 X98.828 Y106.897 E0.00853 ; perimeter
G1 X99.054 Y106.933 E0.01062 ; perimeter
G1 X99.165 Y106.974 E0.00546 ; perimeter
G1 X99.233 Y107.034 E0.00421 ; perimeter
G1 X99.367 Y107.092 E0.00675 ; perimeter
G1 X99.426 Y107.141 E0.00355 ; perimeter
G1 X99.549 Y107.300 E0.00934 ; perimeter
G1 X99.605 Y107.427 E0.00639 ; perimeter
G1 X99.592 Y107.636 E0.00973 ; perimeter
G1 X99.508 Y107.773 E0.00746 ; perimeter
G1 X99.442 Y107.814 E0.00357 ; perimeter
G1 X99.263 Y107.856 E0.00854 ; perimeter
G1 X99.133 Y107.844 E0.00606 ; perimeter
G1 X98.950 Y107.789 E0.00885 ; perimeter
G1 X98.782 Y107.709 E0.00859 ; perimeter
G1 X98.511 Y107.469 E0.01679 ; perimeter
G1 X98.419 Y107.286 E0.00949 ; perimeter
G1 X98.426 Y107.198 E0.00408 ; perimeter
G1 X98.567 Y107.108 F10800.000 ; move inwards before travel
G1 X98.678 Y107.197 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.276874
G1 F2400.000
G1 X98.808 Y107.263 E0.00284 ; infill
;WIDTH:0.286315
G1 X98.818 Y107.266 E0.00020 ; infill
;WIDTH:0.2956
G1 X99.326 Y107.406 E0.01108 ; infill
G1 X99.365 Y107.512 F10800.000 ; move to first infill point
;WIDTH:0.365767
G1 F2400.000
G1 X99.038 Y107.386 E0.00942 ; infill
G1 X98.702 Y107.181 E0.01058 ; infill
G1 X98.691 Y107.188 F10800.000 ; move to first infill point
;WIDTH:0.315104
G1 F2400.000
G1 X99.234 Y107.488 E0.01404 ; infill
;WIDTH:0.215709
G1 X99.345 Y107.578 E0.00206 ; infill
;LAYER_CHANGE
;Z:7.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;7.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.234 Y107.488 E-0.03777 ; wipe and retract
;WIPE_END
G1 E-2.36223 F2400.000 ; retract
G1 Z7.475 F10800.000 ; lift Z
G1 Z7.600 ; move to next layer (37)
;AFTER_LAYER_CHANGE
;7.6
G1 Z7.675 ; lift Z
G1 X103.197 Y100.925 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.259 Y100.697 E0.00800 ; perimeter
G1 X103.360 Y100.713 E0.00344 ; perimeter
G1 X103.424 Y100.754 E0.00259 ; perimeter
G1 X103.245 Y100.889 E0.00759 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.259 Y100.697 E-0.05076 ; wipe and retract
G1 X103.360 Y100.713 E-0.02683 ; wipe and retract
G1 X103.424 Y100.754 E-0.02017 ; wipe and retract
G1 X103.245 Y100.889 E-0.05920 ; wipe and retract
;WIPE_END
G1 E-2.24303 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X100.893 Y105.305 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.081 Y105.063 E0.01420 ; perimeter
G1 X101.121 Y104.859 E0.00961 ; perimeter
G1 X101.207 Y104.691 E0.00876 ; perimeter
G1 X101.272 Y104.498 E0.00944 ; perimeter
G1 X101.340 Y104.205 E0.01392 ; perimeter
G1 X101.423 Y104.064 E0.00760 ; perimeter
G1 X101.565 Y103.916 E0.00947 ; perimeter
G1 X101.683 Y103.442 E0.02263 ; perimeter
G1 X101.671 Y103.279 E0.00758 ; perimeter
G1 X101.727 Y102.860 E0.01959 ; perimeter
G1 X102.356 Y101.569 E0.06654 ; perimeter
G1 X102.568 Y101.087 E0.02440 ; perimeter
G1 X102.741 Y100.764 E0.01697 ; perimeter
G1 X102.895 Y100.282 E0.02342 ; perimeter
G1 X103.044 Y100.102 E0.01081 ; perimeter
G1 X103.134 Y100.063 E0.00454 ; perimeter
G1 X103.252 Y100.074 E0.00551 ; perimeter
G1 X103.435 Y100.237 E0.01131 ; perimeter
G1 X103.535 Y100.253 E0.00472 ; perimeter
G1 X103.791 Y100.417 E0.01410 ; perimeter
G1 X104.020 Y100.388 E0.01069 ; perimeter
G1 X104.229 Y100.440 E0.00997 ; perimeter
G1 X104.822 Y100.188 E0.02989 ; perimeter
G1 X105.383 Y99.776 E0.03224 ; perimeter
G1 X105.636 Y99.562 E0.01532 ; perimeter
G1 X105.691 Y99.469 E0.00501 ; perimeter
G1 X105.894 Y99.335 E0.01128 ; perimeter
G1 X106.151 Y99.215 E0.01315 ; perimeter
G1 X106.345 Y99.201 E0.00899 ; perimeter
G1 X106.515 Y99.238 E0.00808 ; perimeter
G1 X106.600 Y99.327 E0.00567 ; perimeter
G1 X106.694 Y99.504 E0.00928 ; perimeter
G1 X106.694 Y99.675 E0.00792 ; perimeter
G1 X106.624 Y99.812 E0.00713 ; perimeter
G1 X106.395 Y99.994 E0.01356 ; perimeter
G1 X105.755 Y100.234 E0.03168 ; perimeter
G1 X105.506 Y100.260 E0.01157 ; perimeter
G1 X104.482 Y100.569 E0.04957 ; perimeter
G1 X104.208 Y100.736 E0.01485 ; perimeter
G1 X103.918 Y100.987 E0.01777 ; perimeter
G1 X103.363 Y101.403 E0.03214 ; perimeter
G1 X102.845 Y102.350 E0.05000 ; perimeter
G1 X102.797 Y102.501 E0.00730 ; perimeter
G1 X102.569 Y103.008 E0.02576 ; perimeter
G1 X102.324 Y103.440 E0.02302 ; perimeter
G1 X102.117 Y103.674 E0.01446 ; perimeter
G1 X102.012 Y104.072 E0.01910 ; perimeter
G1 X102.015 Y104.399 E0.01514 ; perimeter
G1 X101.984 Y104.707 E0.01430 ; perimeter
G1 X101.867 Y105.031 E0.01598 ; perimeter
G1 X101.827 Y105.103 E0.00382 ; perimeter
G1 X101.702 Y105.244 E0.00874 ; perimeter
G1 X101.501 Y105.355 E0.01063 ; perimeter
G1 X101.313 Y105.386 E0.00880 ; perimeter
G1 X101.010 Y105.808 E0.02408 ; perimeter
G1 X100.834 Y106.103 E0.01590 ; perimeter
G1 X100.760 Y106.183 E0.00503 ; perimeter
G1 X100.663 Y106.215 E0.00476 ; perimeter
G1 X100.426 Y106.243 E0.01106 ; perimeter
G1 X100.269 Y106.212 E0.00738 ; perimeter
G1 X100.010 Y106.075 E0.01361 ; perimeter
G1 X99.914 Y105.987 E0.00605 ; perimeter
G1 X99.851 Y105.848 E0.00705 ; perimeter
G1 X99.829 Y105.680 E0.00784 ; perimeter
G1 X99.857 Y105.571 E0.00521 ; perimeter
G1 X100.025 Y105.405 E0.01095 ; perimeter
G1 X100.146 Y105.373 E0.00577 ; perimeter
G1 X100.522 Y105.342 E0.01746 ; perimeter
G1 X100.656 Y105.293 E0.00662 ; perimeter
G1 X100.834 Y105.302 E0.00824 ; perimeter
G1 X101.175 Y105.426 F10800.000 ; move inwards before travel
G1 X101.315 Y105.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.267338
G1 F2400.000
G1 X101.474 Y104.958 E0.00426 ; infill
G1 X101.550 Y104.826 E0.00285 ; infill
G1 X101.624 Y104.605 E0.00435 ; infill
G1 X101.689 Y104.135 E0.00885 ; infill
G1 X101.919 Y103.360 F10800.000 ; move to first infill point
;WIDTH:0.343384
G1 F2400.000
G1 X102.202 Y102.821 E0.01520 ; infill
G1 X102.491 Y102.184 E0.01748 ; infill
;WIDTH:0.365736
G1 X102.722 Y101.736 E0.01354 ; infill
;WIDTH:0.40955
G1 X103.039 Y101.109 E0.02140 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.722 Y101.736 E-0.18521 ; wipe and retract
;WIPE_END
G1 E-2.21479 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X105.540 Y100.014 ; move to first infill point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.219984
G1 F2400.000
G1 X105.716 Y99.909 E0.00302 ; infill
;WIDTH:0.25968
G1 X105.892 Y99.803 E0.00370 ; infill
;WIDTH:0.278488
G1 X105.924 Y99.780 E0.00076 ; infill
;WIDTH:0.285929
G1 X105.932 Y99.773 E0.00023 ; infill
;WIDTH:0.294818
G1 X105.942 Y99.764 E0.00027 ; infill
;WIDTH:0.324653
G1 X105.974 Y99.740 E0.00095 ; infill
;WIDTH:0.362862
G1 X106.090 Y99.686 E0.00340 ; infill
;WIDTH:0.372057
G1 X106.419 Y99.500 E0.01032 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.090 Y99.686 E-0.09953 ; wipe and retract
;WIPE_END
G1 E-2.30047 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X109.779 Y99.316 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.782 Y99.283 E0.00112 ; perimeter
G1 X110.027 Y99.273 E0.00832 ; perimeter
G1 X109.972 Y99.361 E0.00352 ; perimeter
G1 X109.836 Y99.472 E0.00593 ; perimeter
G1 X109.785 Y99.376 E0.00369 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.782 Y99.283 E-0.02450 ; wipe and retract
G1 X110.027 Y99.273 E-0.06488 ; wipe and retract
G1 X109.972 Y99.361 E-0.02748 ; wipe and retract
G1 X109.836 Y99.472 E-0.04623 ; wipe and retract
G1 X109.785 Y99.376 E-0.02873 ; wipe and retract
;WIPE_END
G1 E-2.20817 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X113.085 Y100.868 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.158 Y100.874 E0.00247 ; perimeter
G1 X113.137 Y100.882 E0.00076 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.158 Y100.874 E-0.00592 ; wipe and retract
G1 X113.137 Y100.882 E-0.00592 ; wipe and retract
;WIPE_END
G1 E-2.38815 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X110.408 Y99.573 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.296 Y99.749 E0.00969 ; perimeter
G1 X110.209 Y99.785 E0.00437 ; perimeter
G1 X109.967 Y100.001 E0.01504 ; perimeter
G1 X109.795 Y100.035 E0.00812 ; perimeter
G1 X109.638 Y99.988 E0.00758 ; perimeter
G1 X109.523 Y99.903 E0.00662 ; perimeter
G1 X109.480 Y99.847 E0.00329 ; perimeter
G1 X109.460 Y99.783 E0.00311 ; perimeter
G1 X109.316 Y99.538 E0.01313 ; perimeter
G1 X109.295 Y99.318 E0.01027 ; perimeter
G1 X109.315 Y99.087 E0.01072 ; perimeter
G1 X109.385 Y98.918 E0.00846 ; perimeter
G1 X109.495 Y98.850 E0.00599 ; perimeter
G1 X109.707 Y98.803 E0.01007 ; perimeter
G1 X110.699 Y98.763 E0.04598 ; perimeter
G1 X110.901 Y98.792 E0.00946 ; perimeter
G1 X110.993 Y98.827 E0.00457 ; perimeter
G1 X111.415 Y99.092 E0.02305 ; perimeter
G1 X111.720 Y99.385 E0.01963 ; perimeter
G1 X112.180 Y99.686 E0.02546 ; perimeter
G1 X112.442 Y99.920 E0.01626 ; perimeter
G1 X112.753 Y100.155 E0.01807 ; perimeter
G1 X113.195 Y100.394 E0.02325 ; perimeter
G1 X113.503 Y100.419 E0.01432 ; perimeter
G1 X113.927 Y100.573 E0.02090 ; perimeter
G1 X114.008 Y100.663 E0.00559 ; perimeter
G1 X114.045 Y100.753 E0.00452 ; perimeter
G1 X114.035 Y100.866 E0.00525 ; perimeter
G1 X113.919 Y100.944 E0.00646 ; perimeter
G1 X113.820 Y101.098 E0.00847 ; perimeter
G1 X113.669 Y101.198 E0.00840 ; perimeter
G1 X113.255 Y101.353 E0.02048 ; perimeter
G1 X113.213 Y101.415 E0.00348 ; perimeter
G1 X113.140 Y101.433 E0.00350 ; perimeter
G1 X112.897 Y101.327 E0.01227 ; perimeter
G1 X112.701 Y101.186 E0.01119 ; perimeter
G1 X110.928 Y99.626 E0.10939 ; perimeter
G1 X110.468 Y99.579 E0.02143 ; perimeter
G1 X110.233 Y99.458 F10800.000 ; move inwards before travel
G1 X110.377 Y99.172 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.389848
G1 F2400.000
G1 X110.797 Y99.196 E0.01215 ; infill
G1 X111.299 Y99.314 E0.01487 ; infill
G1 X110.533 Y99.011 F10800.000 ; move to first infill point
;WIDTH:0.264886
G1 F2400.000
G1 X111.103 Y99.311 E0.01187 ; infill
G1 X111.508 Y99.667 E0.00997 ; infill
;WIDTH:0.303336
G1 X111.725 Y99.832 E0.00590 ; infill
;WIDTH:0.340752
G1 X112.199 Y100.225 E0.01525 ; infill
;WIDTH:0.375544
G1 X112.544 Y100.505 E0.01226 ; infill
;WIDTH:0.422893
G1 X112.877 Y100.737 E0.01283 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.544 Y100.505 E-0.10719 ; wipe and retract
;WIPE_END
G1 E-2.29281 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X115.076 Y103.515 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.177 Y103.358 E0.00862 ; perimeter
G1 X115.360 Y103.230 E0.01037 ; perimeter
G1 X115.475 Y103.220 E0.00534 ; perimeter
G1 X115.693 Y103.291 E0.01062 ; perimeter
G1 X115.776 Y103.366 E0.00521 ; perimeter
G1 X115.833 Y103.486 E0.00613 ; perimeter
G1 X115.867 Y103.785 E0.01395 ; perimeter
G1 X115.856 Y103.938 E0.00707 ; perimeter
G1 X115.758 Y104.179 E0.01204 ; perimeter
G1 X115.656 Y104.254 E0.00586 ; perimeter
G1 X115.498 Y104.288 E0.00753 ; perimeter
G1 X115.312 Y104.226 E0.00906 ; perimeter
G1 X115.191 Y104.092 E0.00835 ; perimeter
G1 X115.072 Y103.799 E0.01469 ; perimeter
G1 X115.051 Y103.653 E0.00680 ; perimeter
G1 X115.065 Y103.574 E0.00375 ; perimeter
G1 X115.260 Y103.489 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.177 Y103.358 E-0.06402 ; wipe and retract
G1 X115.360 Y103.230 E-0.05911 ; wipe and retract
G1 X115.475 Y103.220 E-0.03043 ; wipe and retract
G1 X115.693 Y103.291 E-0.06051 ; wipe and retract
G1 X115.776 Y103.366 E-0.02967 ; wipe and retract
G1 X115.833 Y103.486 E-0.03493 ; wipe and retract
G1 X115.867 Y103.785 E-0.07948 ; wipe and retract
G1 X115.856 Y103.938 E-0.04027 ; wipe and retract
G1 X115.758 Y104.179 E-0.06859 ; wipe and retract
G1 X115.656 Y104.254 E-0.03340 ; wipe and retract
G1 X115.498 Y104.288 E-0.04291 ; wipe and retract
G1 X115.312 Y104.226 E-0.05163 ; wipe and retract
G1 X115.191 Y104.092 E-0.04759 ; wipe and retract
G1 X115.072 Y103.799 E-0.08368 ; wipe and retract
G1 X115.051 Y103.653 E-0.03873 ; wipe and retract
G1 X115.065 Y103.574 E-0.02134 ; wipe and retract
;WIPE_END
G1 E-1.61371 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X115.587 Y107.964 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.667 Y107.974 E0.00373 ; perimeter
G1 X115.792 Y108.109 E0.00854 ; perimeter
G1 X115.874 Y108.281 E0.00881 ; perimeter
G1 X115.901 Y108.404 E0.00583 ; perimeter
G1 X115.902 Y108.818 E0.01918 ; perimeter
G1 X115.843 Y109.456 E0.02965 ; perimeter
G1 X115.849 Y109.639 E0.00849 ; perimeter
G1 X115.878 Y109.723 E0.00413 ; perimeter
G1 X115.879 Y109.990 E0.01236 ; perimeter
G1 X115.865 Y110.087 E0.00454 ; perimeter
G1 X115.803 Y110.226 E0.00705 ; perimeter
G1 X115.727 Y110.308 E0.00515 ; perimeter
G1 X115.639 Y110.358 E0.00471 ; perimeter
G1 X115.464 Y110.371 E0.00812 ; perimeter
G1 X115.279 Y110.279 E0.00956 ; perimeter
G1 X115.184 Y110.101 E0.00936 ; perimeter
G1 X115.150 Y109.848 E0.01181 ; perimeter
G1 X115.176 Y109.523 E0.01511 ; perimeter
G1 X115.215 Y109.412 E0.00543 ; perimeter
G1 X115.176 Y109.276 E0.00658 ; perimeter
G1 X115.146 Y108.866 E0.01903 ; perimeter
G1 X115.102 Y108.707 E0.00763 ; perimeter
G1 X115.112 Y108.448 E0.01200 ; perimeter
G1 X115.177 Y108.216 E0.01116 ; perimeter
G1 X115.277 Y108.043 E0.00928 ; perimeter
G1 X115.458 Y107.934 E0.00978 ; perimeter
G1 X115.529 Y107.951 E0.00337 ; perimeter
G1 X115.628 Y108.034 F10800.000 ; move inwards before travel
G1 X115.497 Y108.192 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.313457
G1 F2400.000
G1 X115.516 Y108.403 E0.00478 ; infill
G1 X115.503 Y108.661 E0.00580 ; infill
G1 X115.520 Y109.015 E0.00797 ; infill
;WIDTH:0.285017
G1 X115.518 Y109.215 E0.00403 ; infill
;WIDTH:0.251709
G1 X115.527 Y109.308 E0.00162 ; infill
;WIDTH:0.217174
G1 X115.535 Y109.401 E0.00136 ; infill
;WIDTH:0.182638
G1 X115.507 Y109.686 E0.00333 ; infill
G1 X115.530 Y110.131 E0.00517 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.507 Y109.686 E-0.11749 ; wipe and retract
G1 X115.535 Y109.401 E-0.07554 ; wipe and retract
;WIPE_END
G1 E-2.20697 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X115.195 Y114.939 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.361 Y115.028 E0.00873 ; perimeter
G1 X115.454 Y115.186 E0.00849 ; perimeter
G1 X115.498 Y115.343 E0.00754 ; perimeter
G1 X115.472 Y115.451 E0.00517 ; perimeter
G1 X115.342 Y115.649 E0.01097 ; perimeter
G1 X115.222 Y115.748 E0.00719 ; perimeter
G1 X115.051 Y115.789 E0.00815 ; perimeter
G1 X114.927 Y115.745 E0.00611 ; perimeter
G1 X114.748 Y115.591 E0.01093 ; perimeter
G1 X114.666 Y115.353 E0.01164 ; perimeter
G1 X114.664 Y115.178 E0.00814 ; perimeter
G1 X114.703 Y115.107 E0.00373 ; perimeter
G1 X114.807 Y115.010 E0.00659 ; perimeter
G1 X114.902 Y114.964 E0.00490 ; perimeter
G1 X115.135 Y114.939 E0.01084 ; perimeter
G1 X115.242 Y115.121 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.361 Y115.028 E-0.06407 ; wipe and retract
G1 X115.454 Y115.186 E-0.04838 ; wipe and retract
G1 X115.498 Y115.343 E-0.04295 ; wipe and retract
G1 X115.472 Y115.451 E-0.02948 ; wipe and retract
G1 X115.342 Y115.649 E-0.06249 ; wipe and retract
G1 X115.222 Y115.748 E-0.04097 ; wipe and retract
G1 X115.051 Y115.789 E-0.04645 ; wipe and retract
G1 X114.927 Y115.745 E-0.03479 ; wipe and retract
G1 X114.748 Y115.591 E-0.06229 ; wipe and retract
G1 X114.666 Y115.353 E-0.06631 ; wipe and retract
G1 X114.664 Y115.178 E-0.04635 ; wipe and retract
G1 X114.703 Y115.107 E-0.02125 ; wipe and retract
G1 X114.807 Y115.010 E-0.03753 ; wipe and retract
G1 X114.902 Y114.964 E-0.02790 ; wipe and retract
G1 X115.135 Y114.939 E-0.06173 ; wipe and retract
;WIPE_END
G1 E-1.70705 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X106.537 Y115.304 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.890 Y115.254 E0.01648 ; perimeter
G1 X107.317 Y115.276 E0.01981 ; perimeter
G1 X107.673 Y115.341 E0.01676 ; perimeter
G1 X108.056 Y115.356 E0.01778 ; perimeter
G1 X108.260 Y115.384 E0.00951 ; perimeter
G1 X108.838 Y115.397 E0.02680 ; perimeter
G1 X109.359 Y115.484 E0.02446 ; perimeter
G1 X109.687 Y115.581 E0.01587 ; perimeter
G1 X109.896 Y115.725 E0.01177 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.922 Y115.763 E0.00190 ; perimeter (bridge)
G1 X109.899 Y115.788 E0.00146 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.718 Y115.930 E0.01062 ; perimeter
G1 X109.448 Y116.038 E0.01345 ; perimeter
G1 X108.988 Y116.126 E0.02172 ; perimeter
G1 X108.513 Y116.169 E0.02209 ; perimeter
G1 X108.083 Y116.167 E0.01993 ; perimeter
G1 X107.391 Y116.108 E0.03216 ; perimeter
G1 X106.946 Y116.048 E0.02081 ; perimeter
G1 X106.734 Y115.941 E0.01101 ; perimeter
G1 X106.668 Y115.926 E0.00313 ; perimeter
G1 X106.569 Y115.848 E0.00583 ; perimeter
G1 X106.546 Y115.787 E0.00304 ; perimeter
G1 X106.365 Y115.561 E0.01337 ; perimeter
G1 X106.374 Y115.455 E0.00493 ; perimeter
G1 X106.494 Y115.345 E0.00753 ; perimeter
G1 X106.826 Y115.512 F10800.000 ; move inwards before travel
G1 X106.730 Y115.631 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.305511
G1 F2400.000
G1 X107.640 Y115.734 E0.02000 ; infill
G1 X108.221 Y115.775 E0.01271 ; infill
G1 X108.938 Y115.774 E0.01567 ; infill
;WIDTH:0.187717
G1 X109.416 Y115.768 E0.00576 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.938 Y115.774 E-0.12620 ; wipe and retract
;WIPE_END
G1 E-2.27380 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X99.258 Y114.997 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.246 Y115.166 E0.00787 ; perimeter
G1 X99.186 Y115.327 E0.00795 ; perimeter
G1 X98.982 Y115.562 E0.01439 ; perimeter
G1 X98.820 Y115.629 E0.00813 ; perimeter
G1 X98.669 Y115.648 E0.00704 ; perimeter
G1 X98.483 Y115.597 E0.00896 ; perimeter
G1 X98.388 Y115.486 E0.00673 ; perimeter
G1 X98.351 Y115.377 E0.00535 ; perimeter
G1 X98.349 Y115.199 E0.00825 ; perimeter
G1 X98.406 Y115.070 E0.00655 ; perimeter
G1 X98.432 Y114.937 E0.00626 ; perimeter
G1 X98.547 Y114.827 E0.00735 ; perimeter
G1 X98.782 Y114.684 E0.01275 ; perimeter
G1 X98.961 Y114.692 E0.00831 ; perimeter
G1 X99.124 Y114.761 E0.00820 ; perimeter
G1 X99.237 Y114.941 E0.00985 ; perimeter
G1 X99.132 Y115.111 F10800.000 ; move inwards before travel
G1 X98.878 Y115.063 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.329606
G1 F2400.000
G1 X98.867 Y115.082 E0.00052 ; infill
;WIDTH:0.343618
G1 X98.805 Y115.145 E0.00221 ; infill
G1 X98.749 Y115.243 E0.00281 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.805 Y115.145 E-0.02969 ; wipe and retract
G1 X98.867 Y115.082 E-0.02334 ; wipe and retract
;WIPE_END
G1 E-2.34697 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X96.059 Y114.478 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.025 Y114.506 E0.00148 ; perimeter
G1 X95.931 Y114.502 E0.00319 ; perimeter
G1 X95.914 Y114.485 E0.00084 ; perimeter
G1 X95.999 Y114.481 E0.00291 ; perimeter
G1 X95.431 Y113.950 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X95.623 Y114.015 E0.00939 ; perimeter
G1 X96.043 Y113.996 E0.01945 ; perimeter
G1 X96.738 Y113.844 E0.03297 ; perimeter
G1 X96.955 Y113.919 E0.01065 ; perimeter
G1 X97.001 Y113.989 E0.00387 ; perimeter
G1 X96.992 Y114.141 E0.00705 ; perimeter
G1 X96.956 Y114.243 E0.00500 ; perimeter
G1 X96.802 Y114.458 E0.01227 ; perimeter
G1 X96.653 Y114.565 E0.00849 ; perimeter
G1 X96.506 Y114.773 E0.01180 ; perimeter
G1 X96.380 Y114.839 E0.00657 ; perimeter
G1 X96.254 Y114.941 E0.00750 ; perimeter
G1 X96.151 Y114.989 E0.00529 ; perimeter
G1 X95.786 Y114.979 E0.01690 ; perimeter
G1 X95.704 Y114.949 E0.00403 ; perimeter
G1 X95.518 Y114.776 E0.01177 ; perimeter
G1 X95.371 Y114.467 E0.01587 ; perimeter
G1 X95.263 Y114.159 E0.01511 ; perimeter
G1 X95.289 Y113.998 E0.00757 ; perimeter
G1 X95.374 Y113.969 E0.00417 ; perimeter
G1 X95.546 Y114.117 F10800.000 ; move inwards before travel
G1 X96.743 Y114.126 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.302842
G1 F2400.000
G1 X96.389 Y114.300 E0.00854 ; infill
G1 X96.345 Y114.550 E0.00548 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.389 Y114.300 E-0.06697 ; wipe and retract
G1 X96.743 Y114.126 E-0.10432 ; wipe and retract
;WIPE_END
G1 E-2.22871 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X96.600 Y110.777 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X96.471 Y110.713 E0.00486 ; perimeter
G1 X96.518 Y110.640 E0.00297 ; perimeter
G1 X96.579 Y110.723 E0.00348 ; perimeter
G1 X96.876 Y109.830 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.897 Y110.341 E0.02366 ; perimeter
G1 X97.056 Y110.558 E0.01247 ; perimeter
G1 X97.065 Y110.626 E0.00316 ; perimeter
G1 X97.394 Y110.934 E0.02089 ; perimeter
G1 X97.505 Y111.134 E0.01057 ; perimeter
G1 X97.525 Y111.218 E0.00403 ; perimeter
G1 X97.466 Y111.355 E0.00688 ; perimeter
G1 X97.245 Y111.448 E0.01112 ; perimeter
G1 X97.086 Y111.453 E0.00739 ; perimeter
G1 X96.766 Y111.398 E0.01503 ; perimeter
G1 X96.201 Y111.118 E0.02918 ; perimeter
G1 X95.940 Y111.130 E0.01212 ; perimeter
G1 X95.818 Y111.058 E0.00659 ; perimeter
G1 X95.787 Y111.004 E0.00285 ; perimeter
G1 X95.821 Y110.832 E0.00813 ; perimeter
G1 X96.868 Y109.225 E0.08886 ; perimeter
G1 X97.049 Y109.042 E0.01192 ; perimeter
G1 X97.197 Y108.932 E0.00853 ; perimeter
G1 X97.403 Y108.845 E0.01035 ; perimeter
G1 X97.591 Y108.804 E0.00892 ; perimeter
G1 X97.732 Y108.783 E0.00662 ; perimeter
G1 X98.103 Y108.775 E0.01720 ; perimeter
G1 X98.385 Y108.819 E0.01319 ; perimeter
G1 X98.707 Y108.925 E0.01573 ; perimeter
G1 X98.821 Y108.990 E0.00606 ; perimeter
G1 X98.852 Y109.138 E0.00703 ; perimeter
G1 X98.792 Y109.280 E0.00713 ; perimeter
G1 X98.574 Y109.457 E0.01300 ; perimeter
G1 X98.316 Y109.537 E0.01254 ; perimeter
G1 X98.043 Y109.580 E0.01281 ; perimeter
G1 X97.282 Y109.613 E0.03527 ; perimeter
G1 X97.166 Y109.704 E0.00683 ; perimeter
G1 X96.931 Y109.807 E0.01189 ; perimeter
G1 X96.483 Y109.907 F10800.000 ; move inwards before travel
G1 X96.998 Y109.493 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.102005
G1 F2400.000
G1 X97.026 Y109.470 E0.00018 ; infill
;WIDTH:0.126612
G1 X97.086 Y109.408 E0.00060 ; infill
;WIDTH:0.140026
G1 X97.164 Y109.338 E0.00085 ; infill
;WIDTH:0.15451
G1 X97.628 Y109.042 E0.00510 ; infill
G1 X97.129 Y109.305 F10800.000 ; move to first infill point
;WIDTH:0.309236
G1 F2400.000
G1 X97.325 Y109.260 E0.00445 ; infill
;WIDTH:0.335456
G1 X97.521 Y109.215 E0.00489 ; infill
;WIDTH:0.355065
G1 X98.076 Y109.173 E0.01446 ; infill
G1 X98.541 Y109.173 E0.01205 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.076 Y109.173 E-0.12253 ; wipe and retract
G1 X97.521 Y109.215 E-0.14698 ; wipe and retract
;WIPE_END
G1 E-2.13049 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X97.250 Y111.174 ; move to first infill point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.223282
G1 F2400.000
G1 X96.879 Y111.034 E0.00595 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.250 Y111.174 E-0.10464 ; wipe and retract
;WIPE_END
G1 E-2.29536 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 X98.612 Y107.178 ; move to first perimeter point
G1 Z7.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.663 Y107.096 E0.00448 ; perimeter
G1 X98.778 Y107.017 E0.00648 ; perimeter
G1 X98.931 Y106.980 E0.00729 ; perimeter
G1 X99.302 Y107.058 E0.01755 ; perimeter
G1 X99.585 Y107.237 E0.01553 ; perimeter
G1 X99.697 Y107.376 E0.00826 ; perimeter
G1 X99.757 Y107.502 E0.00649 ; perimeter
G1 X99.739 Y107.717 E0.01000 ; perimeter
G1 X99.624 Y107.891 E0.00965 ; perimeter
G1 X99.371 Y107.954 E0.01210 ; perimeter
G1 X99.195 Y107.939 E0.00818 ; perimeter
G1 X99.127 Y107.915 E0.00334 ; perimeter
G1 X98.911 Y107.790 E0.01157 ; perimeter
G1 X98.681 Y107.549 E0.01540 ; perimeter
G1 X98.592 Y107.346 E0.01028 ; perimeter
G1 X98.605 Y107.238 E0.00505 ; perimeter
G1 X98.706 Y107.158 F10800.000 ; move inwards before travel
G1 X98.842 Y107.287 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.345346
G1 F2400.000
G1 X99.362 Y107.565 E0.01484 ; infill
;WIDTH:0.251236
G1 X99.488 Y107.662 E0.00275 ; infill
G1 X99.398 Y107.699 F10800.000 ; move to first infill point
;WIDTH:0.28716
G1 F2400.000
G1 X98.866 Y107.248 E0.01416 ; infill
;LAYER_CHANGE
;Z:7.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;7.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.398 Y107.699 E-0.18394 ; wipe and retract
;WIPE_END
G1 E-2.21606 F2400.000 ; retract
G1 Z7.675 F10800.000 ; lift Z
G1 Z7.800 ; move to next layer (38)
;AFTER_LAYER_CHANGE
;7.8
G1 Z7.875 ; lift Z
G1 X101.759 Y104.016 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.802 Y103.788 E0.01078 ; perimeter
G1 X101.852 Y103.728 E0.00358 ; perimeter
G1 X101.846 Y103.902 E0.00807 ; perimeter
G1 X101.797 Y104.039 E0.00673 ; perimeter
G1 X101.964 Y104.555 E0.02513 ; perimeter
G1 X101.963 Y104.792 E0.01099 ; perimeter
G1 X101.950 Y104.901 E0.00507 ; perimeter
G1 X101.808 Y105.286 E0.01902 ; perimeter
G1 X101.645 Y105.480 E0.01172 ; perimeter
G1 X101.434 Y105.609 E0.01146 ; perimeter
G1 X101.209 Y105.845 E0.01511 ; perimeter
G1 X101.100 Y106.027 E0.00979 ; perimeter
G1 X100.896 Y106.245 E0.01385 ; perimeter
G1 X100.553 Y106.300 E0.01605 ; perimeter
G1 X100.341 Y106.255 E0.01005 ; perimeter
G1 X100.227 Y106.199 E0.00590 ; perimeter
G1 X100.146 Y106.139 E0.00467 ; perimeter
G1 X100.029 Y106.005 E0.00824 ; perimeter
G1 X99.983 Y105.912 E0.00479 ; perimeter
G1 X99.958 Y105.714 E0.00925 ; perimeter
G1 X99.985 Y105.615 E0.00477 ; perimeter
G1 X100.182 Y105.434 E0.01236 ; perimeter
G1 X100.396 Y105.369 E0.01035 ; perimeter
G1 X100.597 Y105.343 E0.00942 ; perimeter
G1 X100.975 Y105.176 E0.01915 ; perimeter
G1 X101.204 Y104.724 E0.02348 ; perimeter
G1 X101.323 Y104.412 E0.01546 ; perimeter
G1 X101.523 Y104.174 E0.01439 ; perimeter
G1 X101.710 Y104.050 E0.01040 ; perimeter
G1 X101.990 Y103.988 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.802 Y103.788 E-0.07333 ; wipe and retract
G1 X101.852 Y103.728 E-0.02038 ; wipe and retract
G1 X101.846 Y103.902 E-0.04597 ; wipe and retract
G1 X101.797 Y104.039 E-0.03837 ; wipe and retract
G1 X101.964 Y104.555 E-0.14314 ; wipe and retract
G1 X101.963 Y104.792 E-0.06263 ; wipe and retract
G1 X101.950 Y104.901 E-0.02886 ; wipe and retract
G1 X101.808 Y105.286 E-0.10835 ; wipe and retract
G1 X101.645 Y105.480 E-0.06676 ; wipe and retract
G1 X101.434 Y105.609 E-0.06531 ; wipe and retract
G1 X101.209 Y105.845 E-0.08610 ; wipe and retract
G1 X101.100 Y106.027 E-0.05579 ; wipe and retract
G1 X100.896 Y106.245 E-0.07892 ; wipe and retract
G1 X100.553 Y106.300 E-0.09146 ; wipe and retract
G1 X100.341 Y106.255 E-0.05725 ; wipe and retract
G1 X100.227 Y106.199 E-0.03364 ; wipe and retract
G1 X100.146 Y106.139 E-0.02659 ; wipe and retract
G1 X100.029 Y106.005 E-0.04695 ; wipe and retract
G1 X99.983 Y105.912 E-0.02732 ; wipe and retract
G1 X99.958 Y105.714 E-0.05268 ; wipe and retract
G1 X99.985 Y105.615 E-0.02717 ; wipe and retract
G1 X100.182 Y105.434 E-0.07042 ; wipe and retract
G1 X100.396 Y105.369 E-0.05896 ; wipe and retract
G1 X100.597 Y105.343 E-0.05369 ; wipe and retract
G1 X100.975 Y105.176 E-0.10908 ; wipe and retract
G1 X101.204 Y104.724 E-0.13379 ; wipe and retract
G1 X101.323 Y104.412 E-0.08807 ; wipe and retract
G1 X101.523 Y104.174 E-0.08197 ; wipe and retract
G1 X101.710 Y104.050 E-0.05924 ; wipe and retract
;WIPE_END
G1 E-0.50784 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X103.150 Y100.859 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.211 Y100.568 E0.01006 ; perimeter
G1 X103.250 Y100.593 E0.00156 ; perimeter
G1 X103.317 Y100.726 E0.00504 ; perimeter
G1 X103.198 Y100.823 E0.00518 ; perimeter
G1 X103.901 Y100.739 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.795 Y100.906 E0.00916 ; perimeter
G1 X103.637 Y101.094 E0.01136 ; perimeter
G1 X103.499 Y101.199 E0.00806 ; perimeter
G1 X103.146 Y101.723 E0.02927 ; perimeter
G1 X102.923 Y102.113 E0.02077 ; perimeter
G1 X102.806 Y102.440 E0.01611 ; perimeter
G1 X102.508 Y103.059 E0.03181 ; perimeter
G1 X102.409 Y103.201 E0.00803 ; perimeter
G1 X102.309 Y103.273 E0.00571 ; perimeter
G1 X102.164 Y103.422 E0.00964 ; perimeter
G1 X101.858 Y103.526 E0.01494 ; perimeter
G1 X101.802 Y103.438 E0.00482 ; perimeter
G1 X101.775 Y103.314 E0.00590 ; perimeter
G1 X101.771 Y103.102 E0.00980 ; perimeter
G1 X101.728 Y102.939 E0.00783 ; perimeter
G1 X101.736 Y102.783 E0.00724 ; perimeter
G1 X101.970 Y102.306 E0.02463 ; perimeter
G1 X102.340 Y101.649 E0.03491 ; perimeter
G1 X102.501 Y101.277 E0.01878 ; perimeter
G1 X102.676 Y100.771 E0.02481 ; perimeter
G1 X102.759 Y100.374 E0.01880 ; perimeter
G1 X102.883 Y99.993 E0.01855 ; perimeter
G1 X103.052 Y99.778 E0.01264 ; perimeter
G1 X103.119 Y99.745 E0.00349 ; perimeter
G1 X103.197 Y99.768 E0.00375 ; perimeter
G1 X103.373 Y99.943 E0.01150 ; perimeter
G1 X103.495 Y100.177 E0.01223 ; perimeter
G1 X103.621 Y100.259 E0.00696 ; perimeter
G1 X103.725 Y100.465 E0.01069 ; perimeter
G1 X103.824 Y100.501 E0.00488 ; perimeter
G1 X103.834 Y100.598 E0.00449 ; perimeter
G1 X103.927 Y100.685 E0.00590 ; perimeter
G1 X103.710 Y100.788 F10800.000 ; move inwards before travel
G1 X102.785 Y101.584 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325682
G1 F2400.000
G1 X102.674 Y101.805 E0.00581 ; infill
;WIDTH:0.297774
G1 X102.135 Y102.886 E0.02561 ; infill
G1 X102.088 Y103.154 E0.00577 ; infill
G1 X101.622 Y104.436 F10800.000 ; move to first infill point
;WIDTH:0.252894
G1 F2400.000
G1 X101.618 Y104.609 E0.00303 ; infill
G1 X101.550 Y104.884 E0.00495 ; infill
;WIDTH:0.348351
G1 X101.462 Y105.085 E0.00556 ; infill
G1 X101.151 Y105.556 E0.01434 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.462 Y105.085 E-0.14904 ; wipe and retract
G1 X101.550 Y104.884 E-0.05782 ; wipe and retract
;WIPE_END
G1 E-2.19313 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X105.560 Y100.012 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.537 Y100.017 E0.00111 ; perimeter
G1 X105.631 Y99.681 E0.01614 ; perimeter
G1 X105.703 Y99.621 E0.00435 ; perimeter
G1 X105.850 Y99.373 E0.01336 ; perimeter
G1 X106.224 Y99.159 E0.01993 ; perimeter
G1 X106.406 Y99.139 E0.00849 ; perimeter
G1 X106.534 Y99.172 E0.00613 ; perimeter
G1 X106.686 Y99.301 E0.00925 ; perimeter
G1 X106.758 Y99.468 E0.00844 ; perimeter
G1 X106.746 Y99.595 E0.00591 ; perimeter
G1 X106.669 Y99.768 E0.00879 ; perimeter
G1 X106.444 Y99.945 E0.01323 ; perimeter
G1 X106.036 Y100.068 E0.01978 ; perimeter
G1 X105.741 Y100.064 E0.01364 ; perimeter
G1 X105.618 Y100.028 E0.00595 ; perimeter
G1 X105.546 Y99.992 F10800.000 ; move inwards before travel
G1 X105.851 Y99.825 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.104883
G1 F2400.000
G1 X106.511 Y99.521 E0.00374 ; infill
G1 X106.368 Y99.515 F10800.000 ; move to first infill point
;WIDTH:0.325608
G1 F2400.000
G1 X106.337 Y99.539 E0.00091 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.368 Y99.515 E-0.01019 ; wipe and retract
;WIPE_END
G1 E-2.38981 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X109.850 Y99.494 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.907 Y99.470 E0.00208 ; perimeter
G1 X109.858 Y99.553 E0.00327 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.907 Y99.470 E-0.02549 ; wipe and retract
G1 X109.858 Y99.553 E-0.02549 ; wipe and retract
;WIPE_END
G1 E-2.34902 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X113.004 Y100.867 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.129 Y100.925 E0.00467 ; perimeter
G1 X113.108 Y100.939 E0.00084 ; perimeter
G1 X113.053 Y100.901 E0.00227 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.129 Y100.925 E-0.02098 ; wipe and retract
G1 X113.108 Y100.939 E-0.00659 ; wipe and retract
G1 X113.053 Y100.901 E-0.01767 ; wipe and retract
;WIPE_END
G1 E-2.35476 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X110.819 Y99.413 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.357 Y99.652 E0.02411 ; perimeter
G1 X110.179 Y100.005 E0.01831 ; perimeter
G1 X110.041 Y100.175 E0.01014 ; perimeter
G1 X109.888 Y100.206 E0.00720 ; perimeter
G1 X109.674 Y100.141 E0.01041 ; perimeter
G1 X109.516 Y100.017 E0.00929 ; perimeter
G1 X109.449 Y99.927 E0.00517 ; perimeter
G1 X109.396 Y99.755 E0.00834 ; perimeter
G1 X109.355 Y99.406 E0.01631 ; perimeter
G1 X109.385 Y99.352 E0.00285 ; perimeter
G1 X109.437 Y99.092 E0.01231 ; perimeter
G1 X109.555 Y99.018 E0.00645 ; perimeter
G1 X109.791 Y99.001 E0.01098 ; perimeter
G1 X109.896 Y98.966 E0.00510 ; perimeter
G1 X110.264 Y98.954 E0.01707 ; perimeter
G1 X110.851 Y99.039 E0.02746 ; perimeter
G1 X111.035 Y99.099 E0.00901 ; perimeter
G1 X111.356 Y99.251 E0.01646 ; perimeter
G1 X111.631 Y99.434 E0.01526 ; perimeter
G1 X111.729 Y99.540 E0.00671 ; perimeter
G1 X112.004 Y99.675 E0.01418 ; perimeter
G1 X112.452 Y99.973 E0.02493 ; perimeter
G1 X112.666 Y100.142 E0.01264 ; perimeter
G1 X113.274 Y100.465 E0.03187 ; perimeter
G1 X113.525 Y100.552 E0.01233 ; perimeter
G1 X113.696 Y100.645 E0.00899 ; perimeter
G1 X113.796 Y100.807 E0.00883 ; perimeter
G1 X113.785 Y100.916 E0.00506 ; perimeter
G1 X113.619 Y101.197 E0.01513 ; perimeter
G1 X113.550 Y101.274 E0.00481 ; perimeter
G1 X113.431 Y101.322 E0.00593 ; perimeter
G1 X113.310 Y101.502 E0.01002 ; perimeter
G1 X113.169 Y101.548 E0.00688 ; perimeter
G1 X113.062 Y101.543 E0.00494 ; perimeter
G1 X112.973 Y101.503 E0.00452 ; perimeter
G1 X112.900 Y101.454 E0.00406 ; perimeter
G1 X112.796 Y101.309 E0.00827 ; perimeter
G1 X112.677 Y101.228 E0.00667 ; perimeter
G1 X112.470 Y100.977 E0.01506 ; perimeter
G1 X112.288 Y100.818 E0.01120 ; perimeter
G1 X111.949 Y100.453 E0.02308 ; perimeter
G1 X111.766 Y100.289 E0.01138 ; perimeter
G1 X111.396 Y99.891 E0.02520 ; perimeter
G1 X111.241 Y99.651 E0.01319 ; perimeter
G1 X110.872 Y99.442 E0.01967 ; perimeter
G1 X110.590 Y99.085 F10800.000 ; move inwards before travel
G1 X110.541 Y99.264 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.126718
G1 F2400.000
G1 X110.269 Y99.311 E0.00192 ; infill
G1 X109.874 Y99.883 F10800.000 ; move to first infill point
;WIDTH:0.187551
G1 F2400.000
G1 X109.887 Y99.878 E0.00017 ; infill
G1 X109.917 Y99.945 F10800.000 ; move to first infill point
;WIDTH:0.122336
G1 F2400.000
G1 X109.656 Y99.780 E0.00204 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.917 Y99.945 E-0.08145 ; wipe and retract
;WIPE_END
G1 E-2.31855 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X111.678 Y99.808 ; move to first infill point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.131448
G1 F2400.000
G1 X111.766 Y99.873 E0.00080 ; infill
;WIDTH:0.165976
G1 X111.853 Y99.938 E0.00111 ; infill
;WIDTH:0.209403
G1 X111.993 Y100.057 E0.00255 ; infill
;WIDTH:0.245967
G1 X112.193 Y100.212 E0.00425 ; infill
;WIDTH:0.262491
G1 X112.246 Y100.257 E0.00128 ; infill
;WIDTH:0.311076
G1 X112.471 Y100.464 E0.00681 ; infill
;WIDTH:0.350013
G1 X112.564 Y100.535 E0.00298 ; infill
;WIDTH:0.382695
G1 X112.820 Y100.711 E0.00879 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.564 Y100.535 E-0.08210 ; wipe and retract
;WIPE_END
G1 E-2.31790 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X115.120 Y103.384 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.313 Y103.274 E0.01029 ; perimeter
G1 X115.488 Y103.249 E0.00817 ; perimeter
G1 X115.758 Y103.390 E0.01411 ; perimeter
G1 X115.824 Y103.525 E0.00699 ; perimeter
G1 X115.867 Y103.831 E0.01430 ; perimeter
G1 X115.850 Y104.069 E0.01104 ; perimeter
G1 X115.759 Y104.295 E0.01132 ; perimeter
G1 X115.672 Y104.373 E0.00539 ; perimeter
G1 X115.494 Y104.423 E0.00858 ; perimeter
G1 X115.418 Y104.414 E0.00353 ; perimeter
G1 X115.297 Y104.345 E0.00644 ; perimeter
G1 X115.153 Y104.153 E0.01115 ; perimeter
G1 X115.027 Y103.772 E0.01857 ; perimeter
G1 X115.014 Y103.647 E0.00584 ; perimeter
G1 X115.041 Y103.510 E0.00647 ; perimeter
G1 X115.088 Y103.435 E0.00411 ; perimeter
G1 X115.332 Y103.451 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.313 Y103.274 E-0.07291 ; wipe and retract
G1 X115.488 Y103.249 E-0.04653 ; wipe and retract
G1 X115.758 Y103.390 E-0.08038 ; wipe and retract
G1 X115.824 Y103.525 E-0.03979 ; wipe and retract
G1 X115.867 Y103.831 E-0.08144 ; wipe and retract
G1 X115.850 Y104.069 E-0.06291 ; wipe and retract
G1 X115.759 Y104.295 E-0.06447 ; wipe and retract
G1 X115.672 Y104.373 E-0.03070 ; wipe and retract
G1 X115.494 Y104.423 E-0.04885 ; wipe and retract
G1 X115.418 Y104.414 E-0.02013 ; wipe and retract
G1 X115.297 Y104.345 E-0.03667 ; wipe and retract
G1 X115.153 Y104.153 E-0.06352 ; wipe and retract
G1 X115.027 Y103.772 E-0.10579 ; wipe and retract
G1 X115.014 Y103.647 E-0.03325 ; wipe and retract
G1 X115.041 Y103.510 E-0.03688 ; wipe and retract
G1 X115.088 Y103.435 E-0.02341 ; wipe and retract
;WIPE_END
G1 E-1.55236 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X115.284 Y107.847 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.408 Y107.759 E0.00707 ; perimeter
G1 X115.533 Y107.738 E0.00589 ; perimeter
G1 X115.641 Y107.773 E0.00524 ; perimeter
G1 X115.824 Y107.990 E0.01315 ; perimeter
G1 X115.895 Y108.197 E0.01012 ; perimeter
G1 X115.902 Y108.574 E0.01749 ; perimeter
G1 X115.762 Y109.072 E0.02395 ; perimeter
G1 X115.780 Y109.573 E0.02321 ; perimeter
G1 X115.879 Y109.832 E0.01285 ; perimeter
G1 X115.863 Y110.148 E0.01465 ; perimeter
G1 X115.809 Y110.289 E0.00701 ; perimeter
G1 X115.750 Y110.363 E0.00437 ; perimeter
G1 X115.583 Y110.445 E0.00863 ; perimeter
G1 X115.442 Y110.443 E0.00655 ; perimeter
G1 X115.278 Y110.362 E0.00844 ; perimeter
G1 X115.170 Y110.124 E0.01211 ; perimeter
G1 X115.155 Y110.009 E0.00541 ; perimeter
G1 X115.181 Y109.692 E0.01471 ; perimeter
G1 X115.331 Y109.307 E0.01917 ; perimeter
G1 X115.104 Y108.497 E0.03894 ; perimeter
G1 X115.111 Y108.300 E0.00914 ; perimeter
G1 X115.183 Y108.019 E0.01343 ; perimeter
G1 X115.253 Y107.899 E0.00645 ; perimeter
G1 X115.432 Y107.882 F10800.000 ; move inwards before travel
G1 X115.474 Y108.008 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.279593
G1 F2400.000
G1 X115.626 Y108.669 E0.01335 ; infill
G1 X115.566 Y108.879 F10800.000 ; move to first infill point
;WIDTH:0.354928
G1 F2400.000
G1 X115.503 Y108.450 E0.01124 ; infill
G1 X115.517 Y108.241 E0.00545 ; infill
;WIDTH:0.317734
G1 X115.522 Y108.006 E0.00537 ; infill
G1 X115.517 Y109.553 F10800.000 ; move to first infill point
;WIDTH:0.116305
G1 F2400.000
G1 X115.504 Y109.627 E0.00046 ; infill
;WIDTH:0.1248
G1 X115.462 Y110.185 E0.00381 ; infill
G1 X115.477 Y110.192 F10800.000 ; move to first infill point
;WIDTH:0.196482
G1 F2400.000
G1 X115.520 Y110.127 E0.00100 ; infill
;WIDTH:0.218559
G1 X115.525 Y110.111 E0.00024 ; infill
;WIDTH:0.256347
G1 X115.524 Y110.062 E0.00087 ; infill
;WIDTH:0.283188
G1 X115.535 Y109.556 E0.01011 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.524 Y110.062 E-0.13360 ; wipe and retract
;WIPE_END
G1 E-2.26640 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X115.198 Y114.934 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.368 Y115.034 E0.00913 ; perimeter
G1 X115.455 Y115.182 E0.00795 ; perimeter
G1 X115.500 Y115.351 E0.00811 ; perimeter
G1 X115.481 Y115.436 E0.00406 ; perimeter
G1 X115.345 Y115.645 E0.01153 ; perimeter
G1 X115.220 Y115.749 E0.00752 ; perimeter
G1 X115.046 Y115.791 E0.00827 ; perimeter
G1 X114.909 Y115.746 E0.00670 ; perimeter
G1 X114.732 Y115.607 E0.01042 ; perimeter
G1 X114.664 Y115.351 E0.01226 ; perimeter
G1 X114.658 Y115.179 E0.00797 ; perimeter
G1 X114.696 Y115.110 E0.00366 ; perimeter
G1 X114.805 Y115.008 E0.00690 ; perimeter
G1 X114.902 Y114.961 E0.00499 ; perimeter
G1 X115.138 Y114.934 E0.01100 ; perimeter
G1 X115.243 Y115.126 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.368 Y115.034 E-0.06612 ; wipe and retract
G1 X115.455 Y115.182 E-0.04529 ; wipe and retract
G1 X115.500 Y115.351 E-0.04623 ; wipe and retract
G1 X115.481 Y115.436 E-0.02315 ; wipe and retract
G1 X115.345 Y115.645 E-0.06571 ; wipe and retract
G1 X115.220 Y115.749 E-0.04285 ; wipe and retract
G1 X115.046 Y115.791 E-0.04713 ; wipe and retract
G1 X114.909 Y115.746 E-0.03817 ; wipe and retract
G1 X114.732 Y115.607 E-0.05936 ; wipe and retract
G1 X114.664 Y115.351 E-0.06987 ; wipe and retract
G1 X114.658 Y115.179 E-0.04542 ; wipe and retract
G1 X114.696 Y115.110 E-0.02084 ; wipe and retract
G1 X114.805 Y115.008 E-0.03934 ; wipe and retract
G1 X114.902 Y114.961 E-0.02844 ; wipe and retract
G1 X115.138 Y114.934 E-0.06268 ; wipe and retract
;WIPE_END
G1 E-1.69940 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X106.529 Y115.897 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.399 Y115.790 E0.00779 ; perimeter
G1 X106.253 Y115.740 E0.00716 ; perimeter
G1 X106.048 Y115.508 E0.01435 ; perimeter
G1 X106.033 Y115.358 E0.00700 ; perimeter
G1 X106.057 Y115.330 E0.00170 ; perimeter
G1 X106.254 Y115.239 E0.01008 ; perimeter
G1 X106.695 Y115.196 E0.02050 ; perimeter
G1 X107.058 Y115.228 E0.01687 ; perimeter
G1 X107.790 Y115.402 E0.03485 ; perimeter
G1 X108.417 Y115.398 E0.02907 ; perimeter
G1 X108.526 Y115.381 E0.00509 ; perimeter
G1 X109.260 Y115.395 E0.03399 ; perimeter
G1 X109.850 Y115.479 E0.02759 ; perimeter
G1 X110.179 Y115.572 E0.01587 ; perimeter
G1 X110.401 Y115.728 E0.01256 ; perimeter
G1 X110.417 Y115.778 E0.00245 ; perimeter
G1 X110.389 Y115.821 E0.00239 ; perimeter
G1 X110.114 Y115.980 E0.01473 ; perimeter
G1 X109.865 Y116.060 E0.01207 ; perimeter
G1 X109.386 Y116.137 E0.02249 ; perimeter
G1 X108.869 Y116.167 E0.02400 ; perimeter
G1 X108.368 Y116.153 E0.02318 ; perimeter
G1 X107.501 Y116.061 E0.04040 ; perimeter
G1 X107.359 Y116.069 E0.00659 ; perimeter
G1 X106.841 Y115.999 E0.02422 ; perimeter
G1 X106.727 Y115.941 E0.00589 ; perimeter
G1 X106.588 Y115.910 E0.00663 ; perimeter
G1 X106.536 Y115.729 F10800.000 ; move inwards before travel
G1 X106.702 Y115.563 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.307472
G1 F2400.000
G1 X106.839 Y115.584 E0.00303 ; infill
;WIDTH:0.316092
G1 X106.871 Y115.591 E0.00076 ; infill
;WIDTH:0.352617
G1 X107.374 Y115.691 E0.01321 ; infill
;WIDTH:0.246406
G1 X107.763 Y115.744 E0.00664 ; infill
;WIDTH:0.28126
G1 X108.078 Y115.760 E0.00626 ; infill
;WIDTH:0.288428
G1 X108.437 Y115.776 E0.00733 ; infill
G1 X109.493 Y115.773 E0.02157 ; infill
;WIDTH:0.156371
G1 X109.920 Y115.778 E0.00403 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.493 Y115.773 E-0.11264 ; wipe and retract
;WIPE_END
G1 E-2.28736 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X106.702 Y115.563 ; move to first infill point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.289194
G1 F2400.000
G1 X106.441 Y115.551 E0.00536 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.702 Y115.563 E-0.06906 ; wipe and retract
;WIPE_END
G1 E-2.33094 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X99.330 Y115.050 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.266 Y115.235 E0.00906 ; perimeter
G1 X99.029 Y115.477 E0.01569 ; perimeter
G1 X98.828 Y115.547 E0.00982 ; perimeter
G1 X98.704 Y115.554 E0.00576 ; perimeter
G1 X98.540 Y115.495 E0.00808 ; perimeter
G1 X98.471 Y115.419 E0.00475 ; perimeter
G1 X98.414 Y115.248 E0.00836 ; perimeter
G1 X98.407 Y115.141 E0.00494 ; perimeter
G1 X98.485 Y114.817 E0.01544 ; perimeter
G1 X98.665 Y114.629 E0.01208 ; perimeter
G1 X98.831 Y114.568 E0.00817 ; perimeter
G1 X99.053 Y114.581 E0.01033 ; perimeter
G1 X99.214 Y114.664 E0.00839 ; perimeter
G1 X99.341 Y114.859 E0.01076 ; perimeter
G1 X99.333 Y114.991 E0.00613 ; perimeter
G1 X99.150 Y115.126 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.266 Y115.235 E-0.06698 ; wipe and retract
G1 X99.029 Y115.477 E-0.08941 ; wipe and retract
G1 X98.828 Y115.547 E-0.05593 ; wipe and retract
G1 X98.704 Y115.554 E-0.03279 ; wipe and retract
G1 X98.540 Y115.495 E-0.04604 ; wipe and retract
G1 X98.471 Y115.419 E-0.02704 ; wipe and retract
G1 X98.414 Y115.248 E-0.04764 ; wipe and retract
G1 X98.407 Y115.141 E-0.02815 ; wipe and retract
G1 X98.485 Y114.817 E-0.08798 ; wipe and retract
G1 X98.665 Y114.629 E-0.06885 ; wipe and retract
G1 X98.831 Y114.568 E-0.04653 ; wipe and retract
G1 X99.053 Y114.581 E-0.05884 ; wipe and retract
G1 X99.214 Y114.664 E-0.04781 ; wipe and retract
G1 X99.341 Y114.859 E-0.06127 ; wipe and retract
G1 X99.333 Y114.991 E-0.03489 ; wipe and retract
;WIPE_END
G1 E-1.59984 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X95.565 Y114.231 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.907 Y114.008 E0.01892 ; perimeter
G1 X96.166 Y113.978 E0.01206 ; perimeter
G1 X96.310 Y113.883 E0.00800 ; perimeter
G1 X96.551 Y113.781 E0.01213 ; perimeter
G1 X96.762 Y113.724 E0.01014 ; perimeter
G1 X97.005 Y113.680 E0.01142 ; perimeter
G1 X97.187 Y113.713 E0.00858 ; perimeter
G1 X97.301 Y113.822 E0.00731 ; perimeter
G1 X97.302 Y113.873 E0.00236 ; perimeter
G1 X97.219 Y113.997 E0.00690 ; perimeter
G1 X97.196 Y114.137 E0.00658 ; perimeter
G1 X96.973 Y114.384 E0.01540 ; perimeter
G1 X96.696 Y114.578 E0.01565 ; perimeter
G1 X96.646 Y114.649 E0.00405 ; perimeter
G1 X96.207 Y114.858 E0.02250 ; perimeter
G1 X95.843 Y114.857 E0.01685 ; perimeter
G1 X95.677 Y114.743 E0.00934 ; perimeter
G1 X95.556 Y114.487 E0.01311 ; perimeter
G1 X95.563 Y114.291 E0.00907 ; perimeter
G1 X95.964 Y114.258 F10800.000 ; move inwards before travel
G1 X95.993 Y114.454 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.387899
G1 F2400.000
G1 X96.770 Y114.232 E0.02316 ; infill
G1 X96.975 Y113.994 F10800.000 ; move to first infill point
;WIDTH:0.310132
G1 F2400.000
G1 X96.674 Y114.136 E0.00740 ; infill
G1 X96.270 Y114.376 E0.01044 ; infill
;WIDTH:0.407489
G1 X96.089 Y114.429 E0.00571 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.270 Y114.376 E-0.04974 ; wipe and retract
;WIPE_END
G1 E-2.35026 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X97.163 Y109.509 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.068 Y109.391 E0.00699 ; perimeter
G1 X97.077 Y109.364 E0.00131 ; perimeter
G1 X97.360 Y109.003 E0.02125 ; perimeter
G1 X97.630 Y108.865 E0.01405 ; perimeter
G1 X97.949 Y108.783 E0.01528 ; perimeter
G1 X98.347 Y108.766 E0.01841 ; perimeter
G1 X98.493 Y108.789 E0.00688 ; perimeter
G1 X98.703 Y108.780 E0.00971 ; perimeter
G1 X98.874 Y108.844 E0.00846 ; perimeter
G1 X98.984 Y108.823 E0.00520 ; perimeter
G1 X99.120 Y108.910 E0.00743 ; perimeter
G1 X99.169 Y108.992 E0.00445 ; perimeter
G1 X99.179 Y109.140 E0.00685 ; perimeter
G1 X99.107 Y109.273 E0.00701 ; perimeter
G1 X98.859 Y109.463 E0.01446 ; perimeter
G1 X98.622 Y109.532 E0.01142 ; perimeter
G1 X98.288 Y109.576 E0.01563 ; perimeter
G1 X98.005 Y109.578 E0.01307 ; perimeter
G1 X97.834 Y109.545 E0.00809 ; perimeter
G1 X97.551 Y109.531 E0.01311 ; perimeter
G1 X97.292 Y109.440 E0.01270 ; perimeter
G1 X97.216 Y109.481 E0.00401 ; perimeter
G1 X97.177 Y109.358 F10800.000 ; move inwards before travel
G1 X96.675 Y110.231 ; move to first perimeter point
G1 F1800.000
G1 X96.718 Y110.399 E0.00799 ; perimeter
G1 X96.894 Y110.461 E0.00867 ; perimeter
G1 X97.076 Y110.645 E0.01199 ; perimeter
G1 X97.292 Y110.751 E0.01116 ; perimeter
G1 X97.625 Y111.043 E0.02047 ; perimeter
G1 X97.745 Y111.236 E0.01052 ; perimeter
G1 X97.763 Y111.320 E0.00398 ; perimeter
G1 X97.679 Y111.512 E0.00972 ; perimeter
G1 X97.541 Y111.609 E0.00785 ; perimeter
G1 X97.312 Y111.606 E0.01058 ; perimeter
G1 X97.119 Y111.533 E0.00955 ; perimeter
G1 X97.014 Y111.516 E0.00494 ; perimeter
G1 X96.826 Y111.433 E0.00950 ; perimeter
G1 X96.357 Y111.162 E0.02512 ; perimeter
G1 X96.295 Y111.077 E0.00485 ; perimeter
G1 X96.187 Y111.034 E0.00536 ; perimeter
G1 X96.165 Y110.938 E0.00456 ; perimeter
G1 X96.116 Y110.854 E0.00451 ; perimeter
G1 X96.119 Y110.820 E0.00158 ; perimeter
G1 X96.388 Y110.387 E0.02363 ; perimeter
G1 X96.622 Y110.260 E0.01234 ; perimeter
G1 X96.660 Y110.403 F10800.000 ; move inwards before travel
G1 X96.476 Y110.703 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.37501
G1 F2400.000
G1 X96.862 Y110.988 E0.01326 ; infill
G1 X97.487 Y111.350 E0.01993 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.862 Y110.988 E-0.19049 ; wipe and retract
G1 X96.476 Y110.703 E-0.12672 ; wipe and retract
;WIPE_END
G1 E-2.08279 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X98.105 Y109.336 ; move to first infill point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.102901
G1 F2400.000
G1 X98.894 Y109.106 E0.00410 ; infill
G1 X98.894 Y109.106 F10800.000 ; move to first infill point
;WIDTH:0.312979
G1 F2400.000
G1 X98.458 Y109.169 E0.00989 ; infill
G1 X98.043 Y109.179 E0.00932 ; infill
G1 X97.610 Y109.146 E0.00975 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.043 Y109.179 E-0.11462 ; wipe and retract
G1 X98.458 Y109.169 E-0.10957 ; wipe and retract
G1 X98.894 Y109.106 E-0.11625 ; wipe and retract
;WIPE_END
G1 E-2.05956 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 X99.338 Y108.065 ; move to first perimeter point
G1 Z7.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.015 Y107.847 E0.01804 ; perimeter
G1 X98.844 Y107.633 E0.01270 ; perimeter
G1 X98.764 Y107.409 E0.01101 ; perimeter
G1 X98.794 Y107.206 E0.00951 ; perimeter
G1 X98.905 Y107.110 E0.00680 ; perimeter
G1 X99.034 Y107.073 E0.00621 ; perimeter
G1 X99.206 Y107.071 E0.00796 ; perimeter
G1 X99.424 Y107.128 E0.01047 ; perimeter
G1 X99.719 Y107.303 E0.01589 ; perimeter
G1 X99.849 Y107.458 E0.00937 ; perimeter
G1 X99.899 Y107.555 E0.00507 ; perimeter
G1 X99.889 Y107.801 E0.01140 ; perimeter
G1 X99.761 Y107.988 E0.01049 ; perimeter
G1 X99.493 Y108.093 E0.01333 ; perimeter
G1 X99.397 Y108.076 E0.00453 ; perimeter
G1 X99.265 Y107.682 F10800.000 ; move inwards before travel
G1 X99.049 Y107.319 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343103
G1 F2400.000
G1 X99.300 Y107.538 E0.00831 ; infill
G1 X99.625 Y107.759 E0.00982 ; infill
;LAYER_CHANGE
;Z:8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.300 Y107.538 E-0.10377 ; wipe and retract
G1 X99.049 Y107.319 E-0.08785 ; wipe and retract
;WIPE_END
G1 E-2.20837 F2400.000 ; retract
G1 Z7.875 F10800.000 ; lift Z
G1 Z8.000 ; move to next layer (39)
;AFTER_LAYER_CHANGE
;8
G1 Z8.075 ; lift Z
G1 X106.084 Y115.754 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.948 Y115.672 E0.00736 ; perimeter
G1 X105.783 Y115.512 E0.01065 ; perimeter
G1 X105.698 Y115.347 E0.00861 ; perimeter
G1 X105.705 Y115.288 E0.00273 ; perimeter
G1 X105.881 Y115.180 E0.00955 ; perimeter
G1 X105.997 Y115.144 E0.00563 ; perimeter
G1 X106.528 Y115.139 E0.02460 ; perimeter
G1 X106.853 Y115.193 E0.01529 ; perimeter
G1 X107.094 Y115.285 E0.01191 ; perimeter
G1 X107.311 Y115.337 E0.01035 ; perimeter
G1 X107.399 Y115.392 E0.00483 ; perimeter
G1 X107.896 Y115.499 E0.02355 ; perimeter
G1 X108.326 Y115.502 E0.01989 ; perimeter
G1 X108.769 Y115.412 E0.02096 ; perimeter
G1 X109.134 Y115.379 E0.01695 ; perimeter
G1 X109.609 Y115.386 E0.02204 ; perimeter
G1 X110.350 Y115.475 E0.03456 ; perimeter
G1 X110.682 Y115.566 E0.01593 ; perimeter
G1 X110.875 Y115.689 E0.01060 ; perimeter
G1 X110.902 Y115.782 E0.00452 ; perimeter
G1 X110.758 Y115.924 E0.00937 ; perimeter
G1 X110.595 Y115.998 E0.00830 ; perimeter
G1 X110.305 Y116.075 E0.01391 ; perimeter
G1 X109.783 Y116.148 E0.02438 ; perimeter
G1 X109.194 Y116.160 E0.02731 ; perimeter
G1 X108.690 Y116.129 E0.02339 ; perimeter
G1 X107.568 Y115.962 E0.05253 ; perimeter
G1 X107.032 Y115.991 E0.02488 ; perimeter
G1 X106.702 Y115.945 E0.01543 ; perimeter
G1 X106.389 Y115.869 E0.01490 ; perimeter
G1 X106.346 Y115.834 E0.00257 ; perimeter
G1 X106.142 Y115.771 E0.00991 ; perimeter
G1 X106.078 Y115.595 F10800.000 ; move inwards before travel
G1 X106.275 Y115.469 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.241559
G1 F2400.000
G1 X106.052 Y115.437 E0.00372 ; infill
G1 X106.275 Y115.469 F10800.000 ; move to first infill point
;WIDTH:0.267284
G1 F2400.000
G1 X106.500 Y115.501 E0.00423 ; infill
G1 X107.047 Y115.637 E0.01051 ; infill
G1 X107.564 Y115.683 E0.00969 ; infill
G1 X108.060 Y115.766 F10800.000 ; move to first infill point
;WIDTH:0.136407
G1 F2400.000
G1 X108.358 Y115.789 E0.00233 ; infill
;WIDTH:0.178884
G1 X108.481 Y115.786 E0.00139 ; infill
;WIDTH:0.22136
G1 X108.604 Y115.783 E0.00182 ; infill
;WIDTH:0.263835
G1 X108.727 Y115.779 E0.00226 ; infill
;WIDTH:0.288725
G1 X108.822 Y115.773 E0.00195 ; infill
;WIDTH:0.303388
G1 X109.917 Y115.775 E0.02372 ; infill
;WIDTH:0.1768
G1 X110.438 Y115.759 E0.00581 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.917 Y115.775 E-0.13766 ; wipe and retract
;WIPE_END
G1 E-2.26234 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X99.225 Y115.291 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.086 Y115.392 E0.00799 ; perimeter
G1 X98.870 Y115.455 E0.01041 ; perimeter
G1 X98.733 Y115.451 E0.00637 ; perimeter
G1 X98.592 Y115.389 E0.00711 ; perimeter
G1 X98.507 Y115.301 E0.00568 ; perimeter
G1 X98.461 Y115.059 E0.01141 ; perimeter
G1 X98.497 Y114.903 E0.00741 ; perimeter
G1 X98.476 Y114.550 E0.01638 ; perimeter
G1 X98.519 Y114.500 E0.00305 ; perimeter
G1 X98.532 Y114.387 E0.00526 ; perimeter
G1 X98.561 Y114.377 E0.00143 ; perimeter
G1 X98.707 Y114.452 E0.00759 ; perimeter
G1 X98.915 Y114.379 E0.01023 ; perimeter
G1 X98.959 Y114.381 E0.00201 ; perimeter
G1 X99.351 Y114.486 E0.01880 ; perimeter
G1 X99.580 Y114.644 E0.01290 ; perimeter
G1 X99.517 Y114.712 E0.00429 ; perimeter
G1 X99.492 Y114.871 E0.00744 ; perimeter
G1 X99.404 Y114.971 E0.00617 ; perimeter
G1 X99.341 Y115.159 E0.00917 ; perimeter
G1 X99.265 Y115.246 E0.00536 ; perimeter
G1 X99.059 Y115.244 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.086 Y115.392 E-0.06107 ; wipe and retract
G1 X98.870 Y115.455 E-0.05932 ; wipe and retract
G1 X98.733 Y115.451 E-0.03631 ; wipe and retract
G1 X98.592 Y115.389 E-0.04053 ; wipe and retract
G1 X98.507 Y115.301 E-0.03238 ; wipe and retract
G1 X98.461 Y115.059 E-0.06499 ; wipe and retract
G1 X98.497 Y114.903 E-0.04224 ; wipe and retract
G1 X98.476 Y114.550 E-0.09332 ; wipe and retract
G1 X98.519 Y114.500 E-0.01739 ; wipe and retract
G1 X98.532 Y114.387 E-0.02996 ; wipe and retract
G1 X98.561 Y114.377 E-0.00816 ; wipe and retract
G1 X98.707 Y114.452 E-0.04322 ; wipe and retract
G1 X98.915 Y114.379 E-0.05826 ; wipe and retract
G1 X98.959 Y114.381 E-0.01147 ; wipe and retract
G1 X99.351 Y114.486 E-0.10712 ; wipe and retract
G1 X99.580 Y114.644 E-0.07348 ; wipe and retract
G1 X99.517 Y114.712 E-0.02444 ; wipe and retract
G1 X99.492 Y114.871 E-0.04238 ; wipe and retract
G1 X99.404 Y114.971 E-0.03516 ; wipe and retract
G1 X99.341 Y115.159 E-0.05224 ; wipe and retract
G1 X99.265 Y115.246 E-0.03053 ; wipe and retract
;WIPE_END
G1 E-1.43605 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X95.885 Y114.666 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X95.821 Y114.561 E0.00570 ; perimeter
G1 X95.808 Y114.431 E0.00607 ; perimeter
G1 X95.809 Y114.357 E0.00341 ; perimeter
G1 X95.871 Y114.218 E0.00705 ; perimeter
G1 X96.247 Y113.929 E0.02195 ; perimeter
G1 X96.469 Y113.784 E0.01231 ; perimeter
G1 X96.869 Y113.597 E0.02042 ; perimeter
G1 X97.036 Y113.564 E0.00791 ; perimeter
G1 X97.380 Y113.372 E0.01825 ; perimeter
G1 X97.537 Y113.359 E0.00730 ; perimeter
G1 X97.772 Y113.799 E0.02310 ; perimeter
G1 X97.768 Y113.845 E0.00215 ; perimeter
G1 X97.678 Y113.842 E0.00414 ; perimeter
G1 X97.554 Y114.025 E0.01020 ; perimeter
G1 X97.381 Y114.064 E0.00824 ; perimeter
G1 X97.120 Y114.333 E0.01735 ; perimeter
G1 X96.920 Y114.470 E0.01122 ; perimeter
G1 X96.390 Y114.712 E0.02699 ; perimeter
G1 X96.133 Y114.737 E0.01198 ; perimeter
G1 X95.940 Y114.690 E0.00918 ; perimeter
G1 X95.909 Y114.545 F10800.000 ; move inwards before travel
G1 X96.079 Y114.483 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.319665
G1 F2400.000
G1 X96.866 Y114.031 E0.02088 ; infill
G1 X97.414 Y113.641 E0.01549 ; infill
G1 X96.824 Y114.243 F10800.000 ; move to first infill point
;WIDTH:0.202634
G1 F2400.000
G1 X96.125 Y114.418 E0.00958 ; infill
;WIDTH:0.187198
G1 X96.117 Y114.422 E0.00011 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.125 Y114.418 E-0.00240 ; wipe and retract
;WIPE_END
G1 E-2.39760 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X96.401 Y110.839 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X96.485 Y110.689 E0.00793 ; perimeter
G1 X96.551 Y110.644 E0.00370 ; perimeter
G1 X96.859 Y110.623 E0.01431 ; perimeter
G1 X97.136 Y110.686 E0.01315 ; perimeter
G1 X97.495 Y110.859 E0.01846 ; perimeter
G1 X97.776 Y111.057 E0.01591 ; perimeter
G1 X97.861 Y111.179 E0.00689 ; perimeter
G1 X98.030 Y111.319 E0.01017 ; perimeter
G1 X98.029 Y111.456 E0.00634 ; perimeter
G1 X97.976 Y111.710 E0.01201 ; perimeter
G1 X97.767 Y111.834 E0.01129 ; perimeter
G1 X97.741 Y111.934 E0.00476 ; perimeter
G1 X97.681 Y111.911 E0.00296 ; perimeter
G1 X97.590 Y111.797 E0.00675 ; perimeter
G1 X97.189 Y111.635 E0.02004 ; perimeter
G1 X97.017 Y111.546 E0.00897 ; perimeter
G1 X96.579 Y111.217 E0.02537 ; perimeter
G1 X96.419 Y111.000 E0.01251 ; perimeter
G1 X96.395 Y110.899 E0.00483 ; perimeter
G1 X96.563 Y110.783 F10800.000 ; move inwards before travel
G1 X96.661 Y110.923 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.256213
G1 F2400.000
G1 X97.530 Y111.179 E0.01606 ; infill
G1 X97.775 Y111.490 F10800.000 ; move to first infill point
;WIDTH:0.377934
G1 F2400.000
G1 X96.975 Y111.035 E0.02564 ; infill
;WIDTH:0.362333
G1 X96.712 Y110.875 E0.00816 ; infill
G1 X97.643 Y109.414 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.530 Y109.265 E0.00862 ; perimeter
G1 X97.532 Y109.146 E0.00553 ; perimeter
G1 X97.630 Y109.018 E0.00748 ; perimeter
G1 X97.836 Y108.893 E0.01114 ; perimeter
G1 X98.208 Y108.775 E0.01806 ; perimeter
G1 X98.987 Y108.722 E0.03618 ; perimeter
G1 X99.053 Y108.663 E0.00413 ; perimeter
G1 X99.545 Y108.579 E0.02310 ; perimeter
G1 X99.217 Y108.106 E0.02670 ; perimeter
G1 X99.210 Y108.038 E0.00317 ; perimeter
G1 X99.089 Y107.834 E0.01096 ; perimeter
G1 X98.985 Y107.705 E0.00766 ; perimeter
G1 X98.908 Y107.507 E0.00987 ; perimeter
G1 X98.967 Y107.272 E0.01119 ; perimeter
G1 X99.052 Y107.196 E0.00525 ; perimeter
G1 X99.143 Y107.165 E0.00448 ; perimeter
G1 X99.373 Y107.158 E0.01064 ; perimeter
G1 X99.564 Y107.206 E0.00912 ; perimeter
G1 X99.794 Y107.348 E0.01255 ; perimeter
G1 X99.861 Y107.370 E0.00325 ; perimeter
G1 X99.997 Y107.517 E0.00927 ; perimeter
G1 X100.064 Y107.652 E0.00698 ; perimeter
G1 X100.087 Y107.828 E0.00823 ; perimeter
G1 X99.969 Y107.999 E0.00963 ; perimeter
G1 X99.822 Y108.301 E0.01557 ; perimeter
G1 X99.695 Y108.345 E0.00620 ; perimeter
G1 X99.586 Y108.595 E0.01263 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.565 Y108.642 E0.00215 ; perimeter (bridge)
G1 X99.607 Y108.751 E0.00489 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.522 Y109.126 E0.01784 ; perimeter
G1 X99.371 Y109.364 E0.01302 ; perimeter
G1 X99.189 Y109.430 E0.00898 ; perimeter
G1 X99.138 Y109.471 E0.00303 ; perimeter
G1 X98.928 Y109.528 E0.01005 ; perimeter
G1 X98.535 Y109.572 E0.01835 ; perimeter
G1 X98.178 Y109.555 E0.01652 ; perimeter
G1 X97.699 Y109.434 E0.02289 ; perimeter
G1 X97.671 Y109.230 F10800.000 ; move inwards before travel
G1 X97.829 Y109.170 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341194
G1 F2400.000
G1 X98.521 Y109.163 E0.01716 ; infill
G1 X98.981 Y109.106 E0.01149 ; infill
;WIDTH:0.247531
G1 X99.132 Y109.067 E0.00265 ; infill
G1 X99.272 Y108.870 E0.00411 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.132 Y109.067 E-0.06375 ; wipe and retract
G1 X98.981 Y109.106 E-0.04113 ; wipe and retract
;WIPE_END
G1 E-2.29512 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X100.658 Y105.866 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.832 Y105.806 E0.00622 ; perimeter
G1 X100.756 Y105.890 E0.00384 ; perimeter
G1 X100.715 Y105.885 E0.00138 ; perimeter
G1 X100.722 Y106.397 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.405 Y106.289 E0.01550 ; perimeter
G1 X100.237 Y106.158 E0.00989 ; perimeter
G1 X100.114 Y105.965 E0.01059 ; perimeter
G1 X100.088 Y105.765 E0.00936 ; perimeter
G1 X100.143 Y105.628 E0.00685 ; perimeter
G1 X100.363 Y105.458 E0.01288 ; perimeter
G1 X100.690 Y105.346 E0.01599 ; perimeter
G1 X101.019 Y105.132 E0.01818 ; perimeter
G1 X101.208 Y104.729 E0.02063 ; perimeter
G1 X101.351 Y104.485 E0.01311 ; perimeter
G1 X101.507 Y104.378 E0.00873 ; perimeter
G1 X101.651 Y104.353 E0.00678 ; perimeter
G1 X101.835 Y104.474 E0.01018 ; perimeter
G1 X101.944 Y104.725 E0.01273 ; perimeter
G1 X101.898 Y105.193 E0.02176 ; perimeter
G1 X101.821 Y105.478 E0.01370 ; perimeter
G1 X101.560 Y105.756 E0.01766 ; perimeter
G1 X101.493 Y105.797 E0.00362 ; perimeter
G1 X101.027 Y106.308 E0.03201 ; perimeter
G1 X100.781 Y106.390 E0.01204 ; perimeter
G1 X100.554 Y106.107 F10800.000 ; move inwards before travel
G1 X100.398 Y105.927 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.115502
G1 F2400.000
G1 X100.377 Y105.802 E0.00076 ; infill
G1 X100.390 Y105.733 E0.00042 ; infill
G1 X101.022 Y105.657 F10800.000 ; move to first infill point
;WIDTH:0.359943
G1 F2400.000
G1 X101.305 Y105.434 E0.00948 ; infill
G1 X101.428 Y105.276 E0.00528 ; infill
G1 X101.628 Y104.626 E0.01792 ; infill
G1 X102.012 Y103.307 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.925 Y103.270 E0.00439 ; perimeter
G1 X101.806 Y103.161 E0.00746 ; perimeter
G1 X101.734 Y102.943 E0.01065 ; perimeter
G1 X101.745 Y102.706 E0.01098 ; perimeter
G1 X101.912 Y102.374 E0.01721 ; perimeter
G1 X102.078 Y102.212 E0.01074 ; perimeter
G1 X102.157 Y102.064 E0.00779 ; perimeter
G1 X102.357 Y101.788 E0.01579 ; perimeter
G1 X102.623 Y101.147 E0.03213 ; perimeter
G1 X102.642 Y101.013 E0.00627 ; perimeter
G1 X102.716 Y100.808 E0.01009 ; perimeter
G1 X102.707 Y100.504 E0.01411 ; perimeter
G1 X102.773 Y100.230 E0.01303 ; perimeter
G1 X102.763 Y100.027 E0.00945 ; perimeter
G1 X102.787 Y99.908 E0.00559 ; perimeter
G1 X102.892 Y99.614 E0.01446 ; perimeter
G1 X102.993 Y99.453 E0.00882 ; perimeter
G1 X103.118 Y99.404 E0.00620 ; perimeter
G1 X103.219 Y99.425 E0.00479 ; perimeter
G1 X103.343 Y99.572 E0.00890 ; perimeter
G1 X103.503 Y99.943 E0.01874 ; perimeter
G1 X103.522 Y100.089 E0.00681 ; perimeter
G1 X103.632 Y100.309 E0.01139 ; perimeter
G1 X103.666 Y100.683 E0.01740 ; perimeter
G1 X103.471 Y101.055 E0.01944 ; perimeter
G1 X102.980 Y101.844 E0.04305 ; perimeter
G1 X102.785 Y102.303 E0.02310 ; perimeter
G1 X102.710 Y102.562 E0.01248 ; perimeter
G1 X102.476 Y103.060 E0.02550 ; perimeter
G1 X102.329 Y103.208 E0.00966 ; perimeter
G1 X102.247 Y103.257 E0.00441 ; perimeter
G1 X102.069 Y103.288 E0.00836 ; perimeter
G1 X101.979 Y103.218 F10800.000 ; move inwards before travel
G1 X102.085 Y103.030 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.379175
G1 F2400.000
G1 X102.148 Y102.811 E0.00638 ; infill
G1 X102.243 Y102.617 E0.00604 ; infill
;WIDTH:0.280239
G1 X102.368 Y102.437 E0.00432 ; infill
G1 X102.447 Y102.245 E0.00410 ; infill
;WIDTH:0.158777
G1 X102.616 Y101.940 E0.00336 ; infill
G1 X102.717 Y101.702 E0.00249 ; infill
;WIDTH:0.200332
G1 X102.833 Y101.476 E0.00333 ; infill
;WIDTH:0.241887
G1 X102.949 Y101.249 E0.00421 ; infill
;WIDTH:0.24933
G1 X102.960 Y101.226 E0.00044 ; infill
G1 X103.004 Y101.103 F10800.000 ; move to first infill point
;WIDTH:0.350716
G1 F2400.000
G1 X103.103 Y100.899 E0.00580 ; infill
;WIDTH:0.373943
G1 X103.292 Y100.169 E0.02075 ; infill
G1 X103.226 Y99.924 F10800.000 ; move to first infill point
;WIDTH:0.506231
G1 F2400.000
G1 X103.181 Y100.553 E0.02429 ; infill
G1 X103.209 Y101.021 E0.01806 ; infill
G1 X103.284 Y100.893 F10800.000 ; move to first infill point
;WIDTH:0.366256
G1 F2400.000
G1 X103.164 Y100.246 E0.01768 ; infill
;WIDTH:0.341157
G1 X103.159 Y100.225 E0.00055 ; infill
;WIDTH:0.331892
G1 X103.150 Y100.178 E0.00115 ; infill
;WIDTH:0.319927
G1 X103.140 Y100.055 E0.00283 ; infill
;WIDTH:0.310164
G1 X103.101 Y99.746 E0.00692 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.140 Y100.055 E-0.08218 ; wipe and retract
;WIPE_END
G1 E-2.31782 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X105.823 Y99.765 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.865 Y99.641 E0.00606 ; perimeter
G1 X105.871 Y99.476 E0.00764 ; perimeter
G1 X106.013 Y99.264 E0.01185 ; perimeter
G1 X106.219 Y99.127 E0.01147 ; perimeter
G1 X106.295 Y99.098 E0.00376 ; perimeter
G1 X106.495 Y99.082 E0.00928 ; perimeter
G1 X106.623 Y99.121 E0.00622 ; perimeter
G1 X106.766 Y99.255 E0.00906 ; perimeter
G1 X106.827 Y99.421 E0.00819 ; perimeter
G1 X106.773 Y99.678 E0.01215 ; perimeter
G1 X106.564 Y99.866 E0.01306 ; perimeter
G1 X106.265 Y99.963 E0.01452 ; perimeter
G1 X105.952 Y99.934 E0.01459 ; perimeter
G1 X105.862 Y99.901 E0.00446 ; perimeter
G1 X105.840 Y99.823 E0.00375 ; perimeter
G1 X105.937 Y99.700 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.865 Y99.641 E-0.04838 ; wipe and retract
G1 X105.871 Y99.476 E-0.04351 ; wipe and retract
G1 X106.013 Y99.264 E-0.06752 ; wipe and retract
G1 X106.219 Y99.127 E-0.06532 ; wipe and retract
G1 X106.295 Y99.098 E-0.02140 ; wipe and retract
G1 X106.495 Y99.082 E-0.05289 ; wipe and retract
G1 X106.623 Y99.121 E-0.03543 ; wipe and retract
G1 X106.766 Y99.255 E-0.05164 ; wipe and retract
G1 X106.827 Y99.421 E-0.04668 ; wipe and retract
G1 X106.773 Y99.678 E-0.06920 ; wipe and retract
G1 X106.564 Y99.866 E-0.07441 ; wipe and retract
G1 X106.265 Y99.963 E-0.08274 ; wipe and retract
G1 X105.952 Y99.934 E-0.08309 ; wipe and retract
G1 X105.862 Y99.901 E-0.02541 ; wipe and retract
G1 X105.840 Y99.823 E-0.02137 ; wipe and retract
;WIPE_END
G1 E-1.61100 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X110.355 Y99.248 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.393 Y99.298 E0.00292 ; perimeter
G1 X110.406 Y99.437 E0.00645 ; perimeter
G1 X110.302 Y99.491 E0.00547 ; perimeter
G1 X110.320 Y99.667 E0.00822 ; perimeter
G1 X110.262 Y99.777 E0.00576 ; perimeter
G1 X110.280 Y99.863 E0.00405 ; perimeter
G1 X110.239 Y99.928 E0.00360 ; perimeter
G1 X110.259 Y100.166 E0.01104 ; perimeter
G1 X110.238 Y100.215 E0.00246 ; perimeter
G1 X110.156 Y100.320 E0.00618 ; perimeter
G1 X110.051 Y100.368 E0.00536 ; perimeter
G1 X109.823 Y100.349 E0.01056 ; perimeter
G1 X109.679 Y100.280 E0.00740 ; perimeter
G1 X109.505 Y100.128 E0.01074 ; perimeter
G1 X109.421 Y100.011 E0.00666 ; perimeter
G1 X109.362 Y99.795 E0.01035 ; perimeter
G1 X109.382 Y99.605 E0.00885 ; perimeter
G1 X109.368 Y99.492 E0.00529 ; perimeter
G1 X109.401 Y99.460 E0.00212 ; perimeter
G1 X109.471 Y99.289 E0.00855 ; perimeter
G1 X109.581 Y99.198 E0.00659 ; perimeter
G1 X109.669 Y99.171 E0.00430 ; perimeter
G1 X109.907 Y99.154 E0.01104 ; perimeter
G1 X110.296 Y99.237 E0.01841 ; perimeter
G1 X110.347 Y99.311 F10800.000 ; move inwards before travel
G1 X109.814 Y99.780 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.44327
G1 F2400.000
G1 X109.837 Y99.613 E0.00560 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.814 Y99.780 E-0.04437 ; wipe and retract
;WIPE_END
G1 E-2.35563 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X113.037 Y100.994 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.124 Y101.034 E0.00327 ; perimeter
G1 X113.100 Y101.076 E0.00163 ; perimeter
G1 X113.073 Y101.041 E0.00147 ; perimeter
G1 X113.032 Y101.666 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.853 Y101.546 E0.01000 ; perimeter
G1 X112.627 Y101.252 E0.01718 ; perimeter
G1 X112.422 Y100.863 E0.02036 ; perimeter
G1 X112.245 Y100.672 E0.01207 ; perimeter
G1 X112.167 Y100.513 E0.00818 ; perimeter
G1 X111.888 Y100.213 E0.01902 ; perimeter
G1 X111.817 Y100.089 E0.00660 ; perimeter
G1 X111.766 Y99.888 E0.00960 ; perimeter
G1 X111.652 Y99.761 E0.00790 ; perimeter
G1 X111.679 Y99.745 E0.00145 ; perimeter
G1 X112.024 Y99.930 E0.01814 ; perimeter
G1 X112.276 Y100.010 E0.01221 ; perimeter
G1 X112.894 Y100.396 E0.03379 ; perimeter
G1 X113.409 Y100.635 E0.02631 ; perimeter
G1 X113.582 Y100.764 E0.00998 ; perimeter
G1 X113.654 Y100.904 E0.00731 ; perimeter
G1 X113.660 Y101.005 E0.00468 ; perimeter
G1 X113.642 Y101.107 E0.00477 ; perimeter
G1 X113.477 Y101.385 E0.01499 ; perimeter
G1 X113.470 Y101.486 E0.00468 ; perimeter
G1 X113.381 Y101.624 E0.00761 ; perimeter
G1 X113.224 Y101.705 E0.00821 ; perimeter
G1 X113.091 Y101.678 E0.00626 ; perimeter
G1 X112.995 Y101.453 F10800.000 ; move inwards before travel
G1 X112.861 Y100.827 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291321
G1 F2400.000
G1 X112.734 Y100.706 E0.00364 ; infill
;WIDTH:0.2585
G1 X112.724 Y100.696 E0.00024 ; infill
;WIDTH:0.250638
G1 X112.706 Y100.677 E0.00046 ; infill
;WIDTH:0.236806
G1 X112.688 Y100.659 E0.00041 ; infill
;WIDTH:0.226754
G1 X112.536 Y100.534 E0.00301 ; infill
;WIDTH:0.193946
G1 X112.384 Y100.409 E0.00247 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.536 Y100.534 E-0.05190 ; wipe and retract
;WIPE_END
G1 E-2.34810 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X115.054 Y103.378 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.253 Y103.276 E0.01035 ; perimeter
G1 X115.477 Y103.268 E0.01037 ; perimeter
G1 X115.658 Y103.331 E0.00889 ; perimeter
G1 X115.729 Y103.390 E0.00429 ; perimeter
G1 X115.813 Y103.596 E0.01029 ; perimeter
G1 X115.867 Y103.898 E0.01422 ; perimeter
G1 X115.839 Y104.244 E0.01611 ; perimeter
G1 X115.768 Y104.412 E0.00846 ; perimeter
G1 X115.692 Y104.493 E0.00514 ; perimeter
G1 X115.519 Y104.553 E0.00845 ; perimeter
G1 X115.408 Y104.539 E0.00521 ; perimeter
G1 X115.247 Y104.427 E0.00906 ; perimeter
G1 X115.154 Y104.283 E0.00795 ; perimeter
G1 X114.976 Y103.719 E0.02742 ; perimeter
G1 X114.967 Y103.634 E0.00396 ; perimeter
G1 X114.989 Y103.485 E0.00697 ; perimeter
G1 X115.023 Y103.429 E0.00302 ; perimeter
G1 X115.267 Y103.447 F10800.000 ; move inwards before travel
G1 X115.329 Y103.514 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.296158
G1 F2400.000
G1 X115.493 Y104.159 E0.01401 ; infill
;WIDTH:0.264794
G1 X115.495 Y104.187 E0.00052 ; infill
;WIDTH:0.238318
G1 X115.526 Y104.295 E0.00183 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.495 Y104.187 E-0.02969 ; wipe and retract
;WIPE_END
G1 E-2.37031 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X115.652 Y107.598 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.795 Y107.761 E0.01004 ; perimeter
G1 X115.890 Y108.012 E0.01246 ; perimeter
G1 X115.903 Y108.360 E0.01612 ; perimeter
G1 X115.803 Y108.712 E0.01694 ; perimeter
G1 X115.660 Y108.851 E0.00922 ; perimeter
G1 X115.634 Y108.946 E0.00457 ; perimeter
G1 X115.503 Y109.030 E0.00722 ; perimeter
G1 X115.298 Y108.806 E0.01403 ; perimeter
G1 X115.170 Y108.535 E0.01389 ; perimeter
G1 X115.105 Y108.290 E0.01175 ; perimeter
G1 X115.111 Y108.139 E0.00700 ; perimeter
G1 X115.185 Y107.830 E0.01474 ; perimeter
G1 X115.288 Y107.658 E0.00929 ; perimeter
G1 X115.388 Y107.583 E0.00578 ; perimeter
G1 X115.538 Y107.554 E0.00708 ; perimeter
G1 X115.596 Y107.576 E0.00289 ; perimeter
G1 X115.639 Y107.814 F10800.000 ; move inwards before travel
G1 X115.472 Y109.319 ; move to first perimeter point
G1 F1800.000
G1 X115.650 Y109.466 E0.01073 ; perimeter
G1 X115.704 Y109.606 E0.00695 ; perimeter
G1 X115.801 Y109.710 E0.00659 ; perimeter
G1 X115.859 Y109.848 E0.00690 ; perimeter
G1 X115.880 Y109.963 E0.00543 ; perimeter
G1 X115.880 Y110.055 E0.00425 ; perimeter
G1 X115.822 Y110.348 E0.01386 ; perimeter
G1 X115.767 Y110.426 E0.00441 ; perimeter
G1 X115.629 Y110.510 E0.00752 ; perimeter
G1 X115.431 Y110.516 E0.00918 ; perimeter
G1 X115.269 Y110.439 E0.00829 ; perimeter
G1 X115.199 Y110.326 E0.00615 ; perimeter
G1 X115.163 Y110.184 E0.00677 ; perimeter
G1 X115.180 Y109.872 E0.01449 ; perimeter
G1 X115.280 Y109.634 E0.01195 ; perimeter
G1 X115.403 Y109.520 E0.00778 ; perimeter
G1 X115.452 Y109.376 E0.00709 ; perimeter
G1 X115.563 Y109.532 F10800.000 ; move inwards before travel
G1 X115.558 Y108.614 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352229
G1 F2400.000
G1 X115.503 Y108.246 E0.00956 ; infill
G1 X115.506 Y108.116 E0.00334 ; infill
;WIDTH:0.336002
G1 X115.540 Y107.832 E0.00697 ; infill
G1 X115.505 Y107.806 F10800.000 ; move to first infill point
;WIDTH:0.124999
G1 F2400.000
G1 X115.438 Y108.538 E0.00502 ; infill
G1 X115.451 Y108.565 F10800.000 ; move to first infill point
;WIDTH:0.251264
G1 F2400.000
G1 X115.509 Y107.921 E0.01121 ; infill
;WIDTH:0.209511
G1 X115.580 Y107.876 E0.00116 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.509 Y107.921 E-0.02216 ; wipe and retract
;WIPE_END
G1 E-2.37784 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 X115.202 Y114.929 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.371 Y115.028 E0.00909 ; perimeter
G1 X115.466 Y115.183 E0.00843 ; perimeter
G1 X115.507 Y115.343 E0.00762 ; perimeter
G1 X115.490 Y115.421 E0.00372 ; perimeter
G1 X115.347 Y115.640 E0.01212 ; perimeter
G1 X115.217 Y115.749 E0.00786 ; perimeter
G1 X115.042 Y115.793 E0.00839 ; perimeter
G1 X114.895 Y115.748 E0.00710 ; perimeter
G1 X114.716 Y115.613 E0.01040 ; perimeter
G1 X114.644 Y115.359 E0.01222 ; perimeter
G1 X114.647 Y115.190 E0.00782 ; perimeter
G1 X114.689 Y115.112 E0.00411 ; perimeter
G1 X114.803 Y115.006 E0.00722 ; perimeter
G1 X114.902 Y114.958 E0.00509 ; perimeter
G1 X115.142 Y114.929 E0.01117 ; perimeter
G1 X115.247 Y115.120 F10800.000 ; move inwards before travel
G1 X115.058 Y115.342 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.371807
G1 F2400.000
G1 X115.093 Y115.319 E0.00117 ; infill
;LAYER_CHANGE
;Z:8.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;8.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.058 Y115.342 E-0.01125 ; wipe and retract
;WIPE_END
G1 E-2.38875 F2400.000 ; retract
G1 Z8.075 F10800.000 ; lift Z
G1 Z8.200 ; move to next layer (40)
;AFTER_LAYER_CHANGE
;8.2
G1 Z8.275 ; lift Z
G1 X108.165 Y115.755 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.462 Y115.562 E0.01642 ; perimeter
G1 X109.045 Y115.441 E0.02758 ; perimeter
G1 X109.530 Y115.387 E0.02260 ; perimeter
G1 X109.967 Y115.377 E0.02024 ; perimeter
G1 X110.523 Y115.421 E0.02585 ; perimeter
G1 X110.865 Y115.473 E0.01603 ; perimeter
G1 X111.210 Y115.569 E0.01656 ; perimeter
G1 X111.386 Y115.677 E0.00958 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.440 Y115.785 E0.00504 ; perimeter (bridge)
G1 X111.426 Y115.794 E0.00067 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.101 Y116.000 E0.01785 ; perimeter
G1 X110.746 Y116.089 E0.01694 ; perimeter
G1 X110.080 Y116.152 E0.03099 ; perimeter
G1 X109.517 Y116.154 E0.02607 ; perimeter
G1 X108.911 Y116.092 E0.02823 ; perimeter
G1 X108.699 Y116.046 E0.01003 ; perimeter
G1 X108.287 Y115.874 E0.02071 ; perimeter
G1 X108.164 Y115.863 E0.00572 ; perimeter
G1 X107.953 Y115.686 E0.01273 ; perimeter
G1 X107.508 Y115.758 E0.02091 ; perimeter
G1 X107.244 Y115.865 E0.01322 ; perimeter
G1 X106.838 Y115.906 E0.01890 ; perimeter
G1 X106.635 Y115.878 E0.00947 ; perimeter
G1 X106.498 Y115.886 E0.00636 ; perimeter
G1 X106.093 Y115.800 E0.01918 ; perimeter
G1 X105.865 Y115.722 E0.01115 ; perimeter
G1 X105.657 Y115.615 E0.01083 ; perimeter
G1 X105.479 Y115.464 E0.01081 ; perimeter
G1 X105.383 Y115.274 E0.00989 ; perimeter
G1 X105.395 Y115.231 E0.00207 ; perimeter
G1 X105.502 Y115.140 E0.00649 ; perimeter
G1 X105.781 Y115.056 E0.01354 ; perimeter
G1 X106.056 Y115.059 E0.01273 ; perimeter
G1 X106.346 Y115.091 E0.01350 ; perimeter
G1 X106.592 Y115.143 E0.01164 ; perimeter
G1 X107.080 Y115.322 E0.02410 ; perimeter
G1 X107.723 Y115.714 E0.03487 ; perimeter
G1 X107.929 Y115.678 E0.00969 ; perimeter
G1 X108.108 Y115.736 E0.00871 ; perimeter
G1 X108.437 Y115.982 F10800.000 ; move inwards before travel
G1 X108.716 Y115.792 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23358
G1 F2400.000
G1 X109.097 Y115.773 E0.00605 ; infill
;WIDTH:0.279966
G1 X109.317 Y115.772 E0.00432 ; infill
;WIDTH:0.327429
G1 X110.272 Y115.767 E0.02261 ; infill
;WIDTH:0.228429
G1 X110.952 Y115.779 E0.01048 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.272 Y115.767 E-0.17937 ; wipe and retract
;WIPE_END
G1 E-2.22063 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X106.994 Y115.648 ; move to first infill point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.306683
G1 F2400.000
G1 X106.489 Y115.502 E0.01154 ; infill
G1 X106.191 Y115.444 E0.00666 ; infill
;WIDTH:0.296784
G1 X106.035 Y115.409 E0.00338 ; infill
;WIDTH:0.262402
G1 X105.724 Y115.356 E0.00574 ; infill
G1 X105.728 Y115.324 F10800.000 ; move to first infill point
;WIDTH:0.169509
G1 F2400.000
G1 X106.576 Y115.640 E0.00953 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.728 Y115.324 E-0.23893 ; wipe and retract
;WIPE_END
G1 E-2.16107 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X114.659 Y115.533 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.627 Y115.394 E0.00665 ; perimeter
G1 X114.647 Y115.309 E0.00401 ; perimeter
G1 X114.643 Y115.188 E0.00564 ; perimeter
G1 X114.682 Y115.115 E0.00383 ; perimeter
G1 X114.802 Y115.004 E0.00754 ; perimeter
G1 X114.903 Y114.955 E0.00521 ; perimeter
G1 X115.205 Y114.924 E0.01407 ; perimeter
G1 X115.381 Y115.020 E0.00931 ; perimeter
G1 X115.479 Y115.181 E0.00871 ; perimeter
G1 X115.515 Y115.332 E0.00720 ; perimeter
G1 X115.499 Y115.406 E0.00349 ; perimeter
G1 X115.350 Y115.636 E0.01269 ; perimeter
G1 X115.215 Y115.750 E0.00819 ; perimeter
G1 X115.037 Y115.796 E0.00849 ; perimeter
G1 X114.882 Y115.751 E0.00751 ; perimeter
G1 X114.703 Y115.621 E0.01021 ; perimeter
G1 X114.686 Y115.587 E0.00177 ; perimeter
G1 X114.744 Y115.417 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.627 Y115.394 E-0.05340 ; wipe and retract
G1 X114.647 Y115.309 E-0.02287 ; wipe and retract
G1 X114.643 Y115.188 E-0.03215 ; wipe and retract
G1 X114.682 Y115.115 E-0.02181 ; wipe and retract
G1 X114.802 Y115.004 E-0.04294 ; wipe and retract
G1 X114.903 Y114.955 E-0.02971 ; wipe and retract
G1 X115.205 Y114.924 E-0.08015 ; wipe and retract
G1 X115.381 Y115.020 E-0.05307 ; wipe and retract
G1 X115.479 Y115.181 E-0.04963 ; wipe and retract
G1 X115.515 Y115.332 E-0.04100 ; wipe and retract
G1 X115.499 Y115.406 E-0.01989 ; wipe and retract
G1 X115.350 Y115.636 E-0.07231 ; wipe and retract
G1 X115.215 Y115.750 E-0.04665 ; wipe and retract
G1 X115.037 Y115.796 E-0.04839 ; wipe and retract
G1 X114.882 Y115.751 E-0.04277 ; wipe and retract
G1 X114.703 Y115.621 E-0.05816 ; wipe and retract
G1 X114.686 Y115.587 E-0.01008 ; wipe and retract
;WIPE_END
G1 E-1.67501 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X115.434 Y110.596 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.294 Y110.532 E0.00715 ; perimeter
G1 X115.246 Y110.486 E0.00304 ; perimeter
G1 X115.187 Y110.352 E0.00678 ; perimeter
G1 X115.163 Y110.259 E0.00448 ; perimeter
G1 X115.186 Y109.952 E0.01423 ; perimeter
G1 X115.267 Y109.799 E0.00802 ; perimeter
G1 X115.324 Y109.776 E0.00285 ; perimeter
G1 X115.408 Y109.697 E0.00535 ; perimeter
G1 X115.568 Y109.646 E0.00777 ; perimeter
G1 X115.700 Y109.708 E0.00675 ; perimeter
G1 X115.772 Y109.771 E0.00443 ; perimeter
G1 X115.847 Y109.915 E0.00752 ; perimeter
G1 X115.877 Y110.109 E0.00908 ; perimeter
G1 X115.821 Y110.421 E0.01469 ; perimeter
G1 X115.775 Y110.491 E0.00389 ; perimeter
G1 X115.674 Y110.566 E0.00584 ; perimeter
G1 X115.564 Y110.599 E0.00529 ; perimeter
G1 X115.494 Y110.598 E0.00328 ; perimeter
G1 X115.391 Y110.448 F10800.000 ; move inwards before travel
G1 X115.512 Y110.266 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.240061
G1 F2400.000
G1 X115.537 Y110.017 E0.00411 ; infill
;WIDTH:0.20342
G1 X115.542 Y109.989 E0.00038 ; infill
G1 X115.523 Y108.726 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.433 Y108.695 E0.00439 ; perimeter
G1 X115.275 Y108.538 E0.01031 ; perimeter
G1 X115.175 Y108.348 E0.00994 ; perimeter
G1 X115.107 Y108.082 E0.01273 ; perimeter
G1 X115.135 Y107.821 E0.01217 ; perimeter
G1 X115.189 Y107.637 E0.00888 ; perimeter
G1 X115.291 Y107.470 E0.00907 ; perimeter
G1 X115.380 Y107.404 E0.00513 ; perimeter
G1 X115.518 Y107.368 E0.00663 ; perimeter
G1 X115.656 Y107.421 E0.00684 ; perimeter
G1 X115.780 Y107.554 E0.00844 ; perimeter
G1 X115.883 Y107.802 E0.01242 ; perimeter
G1 X115.904 Y108.150 E0.01617 ; perimeter
G1 X115.852 Y108.376 E0.01072 ; perimeter
G1 X115.791 Y108.501 E0.00648 ; perimeter
G1 X115.574 Y108.695 E0.01348 ; perimeter
G1 X115.472 Y108.646 F10800.000 ; move inwards before travel
G1 X115.504 Y108.426 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.181661
G1 F2400.000
G1 X115.513 Y108.367 E0.00069 ; infill
;WIDTH:0.213053
G1 X115.522 Y108.308 E0.00084 ; infill
;WIDTH:0.25785
G1 X115.522 Y108.259 E0.00088 ; infill
;WIDTH:0.287652
G1 X115.445 Y107.680 E0.01188 ; infill
G1 X115.537 Y107.646 F10800.000 ; move to first infill point
;WIDTH:0.321813
G1 F2400.000
G1 X115.508 Y107.902 E0.00598 ; infill
;WIDTH:0.348971
G1 X115.503 Y108.040 E0.00353 ; infill
G1 X115.558 Y108.393 E0.00908 ; infill
G1 X115.457 Y108.366 F10800.000 ; move to first infill point
;WIDTH:0.24284
G1 F2400.000
G1 X115.515 Y107.625 E0.01236 ; infill
G1 X115.510 Y107.623 F10800.000 ; move to first infill point
;WIDTH:0.116432
G1 F2400.000
G1 X115.440 Y108.334 E0.00437 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y107.623 E-0.18851 ; wipe and retract
;WIPE_END
G1 E-2.21149 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X115.537 Y104.681 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.388 Y104.665 E0.00692 ; perimeter
G1 X115.270 Y104.583 E0.00668 ; perimeter
G1 X115.168 Y104.430 E0.00850 ; perimeter
G1 X115.073 Y104.194 E0.01181 ; perimeter
G1 X114.925 Y103.654 E0.02591 ; perimeter
G1 X114.936 Y103.461 E0.00899 ; perimeter
G1 X114.994 Y103.363 E0.00528 ; perimeter
G1 X115.180 Y103.228 E0.01062 ; perimeter
G1 X115.389 Y103.216 E0.00972 ; perimeter
G1 X115.590 Y103.287 E0.00989 ; perimeter
G1 X115.732 Y103.448 E0.00993 ; perimeter
G1 X115.803 Y103.687 E0.01153 ; perimeter
G1 X115.864 Y104.003 E0.01492 ; perimeter
G1 X115.831 Y104.408 E0.01882 ; perimeter
G1 X115.779 Y104.526 E0.00595 ; perimeter
G1 X115.694 Y104.625 E0.00605 ; perimeter
G1 X115.593 Y104.661 E0.00495 ; perimeter
G1 X115.448 Y104.561 F10800.000 ; move inwards before travel
G1 X115.483 Y104.433 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.376687
G1 F2400.000
G1 X115.453 Y104.025 E0.01135 ; infill
G1 X115.396 Y103.766 E0.00735 ; infill
G1 X115.339 Y103.619 E0.00440 ; infill
;WIDTH:0.36886
G1 X115.202 Y103.516 E0.00464 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.339 Y103.619 E-0.04516 ; wipe and retract
;WIPE_END
G1 E-2.35484 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X113.235 Y101.869 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.048 Y101.818 E0.00899 ; perimeter
G1 X112.814 Y101.649 E0.01337 ; perimeter
G1 X112.663 Y101.463 E0.01111 ; perimeter
G1 X112.653 Y101.379 E0.00393 ; perimeter
G1 X112.594 Y101.231 E0.00735 ; perimeter
G1 X112.606 Y101.171 E0.00283 ; perimeter
G1 X112.480 Y100.733 E0.02113 ; perimeter
G1 X112.495 Y100.684 E0.00238 ; perimeter
G1 X112.392 Y100.396 E0.01418 ; perimeter
G1 X112.752 Y100.490 E0.01727 ; perimeter
G1 X112.991 Y100.619 E0.01255 ; perimeter
G1 X113.337 Y100.751 E0.01719 ; perimeter
G1 X113.484 Y100.894 E0.00947 ; perimeter
G1 X113.550 Y101.016 E0.00643 ; perimeter
G1 X113.523 Y101.258 E0.01129 ; perimeter
G1 X113.557 Y101.459 E0.00945 ; perimeter
G1 X113.550 Y101.571 E0.00519 ; perimeter
G1 X113.457 Y101.714 E0.00790 ; perimeter
G1 X113.436 Y101.816 E0.00482 ; perimeter
G1 X113.295 Y101.870 E0.00697 ; perimeter
G1 X113.134 Y101.704 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.048 Y101.818 E-0.06667 ; wipe and retract
G1 X112.814 Y101.649 E-0.07619 ; wipe and retract
G1 X112.663 Y101.463 E-0.06328 ; wipe and retract
G1 X112.653 Y101.379 E-0.02238 ; wipe and retract
G1 X112.594 Y101.231 E-0.04187 ; wipe and retract
G1 X112.606 Y101.171 E-0.01614 ; wipe and retract
G1 X112.480 Y100.733 E-0.12039 ; wipe and retract
G1 X112.495 Y100.684 E-0.01357 ; wipe and retract
G1 X112.392 Y100.396 E-0.08078 ; wipe and retract
G1 X112.752 Y100.490 E-0.09838 ; wipe and retract
G1 X112.991 Y100.619 E-0.07149 ; wipe and retract
G1 X113.337 Y100.751 E-0.09795 ; wipe and retract
G1 X113.484 Y100.894 E-0.05393 ; wipe and retract
G1 X113.550 Y101.016 E-0.03665 ; wipe and retract
G1 X113.523 Y101.258 E-0.06432 ; wipe and retract
G1 X113.557 Y101.459 E-0.05384 ; wipe and retract
G1 X113.550 Y101.571 E-0.02958 ; wipe and retract
G1 X113.457 Y101.714 E-0.04500 ; wipe and retract
G1 X113.436 Y101.816 E-0.02744 ; wipe and retract
G1 X113.295 Y101.870 E-0.03973 ; wipe and retract
;WIPE_END
G1 E-1.28042 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X109.420 Y99.487 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.571 Y99.367 E0.00896 ; perimeter
G1 X109.784 Y99.325 E0.01002 ; perimeter
G1 X110.152 Y99.479 E0.01849 ; perimeter
G1 X110.266 Y99.652 E0.00960 ; perimeter
G1 X110.326 Y100.003 E0.01650 ; perimeter
G1 X110.353 Y100.327 E0.01507 ; perimeter
G1 X110.345 Y100.429 E0.00474 ; perimeter
G1 X110.281 Y100.508 E0.00472 ; perimeter
G1 X110.142 Y100.535 E0.00653 ; perimeter
G1 X109.879 Y100.505 E0.01227 ; perimeter
G1 X109.663 Y100.403 E0.01106 ; perimeter
G1 X109.431 Y100.196 E0.01440 ; perimeter
G1 X109.340 Y100.067 E0.00734 ; perimeter
G1 X109.304 Y99.868 E0.00937 ; perimeter
G1 X109.344 Y99.724 E0.00695 ; perimeter
G1 X109.353 Y99.553 E0.00792 ; perimeter
G1 X109.377 Y99.529 E0.00156 ; perimeter
G1 X109.610 Y99.522 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.571 Y99.367 E-0.06680 ; wipe and retract
G1 X109.784 Y99.325 E-0.05710 ; wipe and retract
G1 X110.152 Y99.479 E-0.10535 ; wipe and retract
G1 X110.266 Y99.652 E-0.05472 ; wipe and retract
G1 X110.326 Y100.003 E-0.09401 ; wipe and retract
G1 X110.353 Y100.327 E-0.08584 ; wipe and retract
G1 X110.345 Y100.429 E-0.02698 ; wipe and retract
G1 X110.281 Y100.508 E-0.02688 ; wipe and retract
G1 X110.142 Y100.535 E-0.03722 ; wipe and retract
G1 X109.879 Y100.505 E-0.06991 ; wipe and retract
G1 X109.663 Y100.403 E-0.06299 ; wipe and retract
G1 X109.431 Y100.196 E-0.08202 ; wipe and retract
G1 X109.340 Y100.067 E-0.04181 ; wipe and retract
G1 X109.304 Y99.868 E-0.05335 ; wipe and retract
G1 X109.344 Y99.724 E-0.03958 ; wipe and retract
G1 X109.353 Y99.553 E-0.04510 ; wipe and retract
G1 X109.377 Y99.529 E-0.00888 ; wipe and retract
;WIPE_END
G1 E-1.44148 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X106.959 Y99.420 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.893 Y99.574 E0.00776 ; perimeter
G1 X106.679 Y99.785 E0.01392 ; perimeter
G1 X106.435 Y99.883 E0.01218 ; perimeter
G1 X106.168 Y99.875 E0.01237 ; perimeter
G1 X106.019 Y99.802 E0.00767 ; perimeter
G1 X105.976 Y99.697 E0.00526 ; perimeter
G1 X105.994 Y99.363 E0.01552 ; perimeter
G1 X106.090 Y99.196 E0.00890 ; perimeter
G1 X106.237 Y99.093 E0.00832 ; perimeter
G1 X106.389 Y99.034 E0.00755 ; perimeter
G1 X106.582 Y99.026 E0.00894 ; perimeter
G1 X106.812 Y99.112 E0.01141 ; perimeter
G1 X106.928 Y99.228 E0.00757 ; perimeter
G1 X106.938 Y99.364 E0.00632 ; perimeter
G1 X106.805 Y99.485 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.893 Y99.574 E-0.05662 ; wipe and retract
G1 X106.679 Y99.785 E-0.07932 ; wipe and retract
G1 X106.435 Y99.883 E-0.06938 ; wipe and retract
G1 X106.168 Y99.875 E-0.07048 ; wipe and retract
G1 X106.019 Y99.802 E-0.04367 ; wipe and retract
G1 X105.976 Y99.697 E-0.02998 ; wipe and retract
G1 X105.994 Y99.363 E-0.08843 ; wipe and retract
G1 X106.090 Y99.196 E-0.05072 ; wipe and retract
G1 X106.237 Y99.093 E-0.04742 ; wipe and retract
G1 X106.389 Y99.034 E-0.04304 ; wipe and retract
G1 X106.582 Y99.026 E-0.05091 ; wipe and retract
G1 X106.812 Y99.112 E-0.06501 ; wipe and retract
G1 X106.928 Y99.228 E-0.04313 ; wipe and retract
G1 X106.938 Y99.364 E-0.03600 ; wipe and retract
;WIPE_END
G1 E-1.62591 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X101.788 Y103.084 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.724 Y102.951 E0.00685 ; perimeter
G1 X101.740 Y102.651 E0.01396 ; perimeter
G1 X101.852 Y102.444 E0.01085 ; perimeter
G1 X101.917 Y102.381 E0.00420 ; perimeter
G1 X101.976 Y102.341 E0.00332 ; perimeter
G1 X102.066 Y102.321 E0.00429 ; perimeter
G1 X102.397 Y102.018 E0.02076 ; perimeter
G1 X102.709 Y101.339 E0.03464 ; perimeter
G1 X102.697 Y101.224 E0.00536 ; perimeter
G1 X102.751 Y100.835 E0.01816 ; perimeter
G1 X102.729 Y100.330 E0.02344 ; perimeter
G1 X102.751 Y100.238 E0.00437 ; perimeter
G1 X102.732 Y99.826 E0.01913 ; perimeter
G1 X102.781 Y99.580 E0.01162 ; perimeter
G1 X102.775 Y99.516 E0.00299 ; perimeter
G1 X102.885 Y99.192 E0.01585 ; perimeter
G1 X102.926 Y99.124 E0.00369 ; perimeter
G1 X103.054 Y99.074 E0.00634 ; perimeter
G1 X103.283 Y99.093 E0.01064 ; perimeter
G1 X103.381 Y99.209 E0.00706 ; perimeter
G1 X103.412 Y99.405 E0.00916 ; perimeter
G1 X103.492 Y99.613 E0.01032 ; perimeter
G1 X103.538 Y99.997 E0.01795 ; perimeter
G1 X103.528 Y100.069 E0.00334 ; perimeter
G1 X103.569 Y100.536 E0.02173 ; perimeter
G1 X103.501 Y100.705 E0.00841 ; perimeter
G1 X103.292 Y101.071 E0.01952 ; perimeter
G1 X102.940 Y101.549 E0.02752 ; perimeter
G1 X102.789 Y101.824 E0.01451 ; perimeter
G1 X102.743 Y102.025 E0.00958 ; perimeter
G1 X102.645 Y102.223 E0.01019 ; perimeter
G1 X102.654 Y102.435 E0.00982 ; perimeter
G1 X102.611 Y102.694 E0.01218 ; perimeter
G1 X102.522 Y102.924 E0.01141 ; perimeter
G1 X102.445 Y103.063 E0.00736 ; perimeter
G1 X102.290 Y103.175 E0.00887 ; perimeter
G1 X102.030 Y103.204 E0.01210 ; perimeter
G1 X101.842 Y103.111 E0.00973 ; perimeter
G1 X101.829 Y102.942 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.724 Y102.951 E-0.05242 ; wipe and retract
G1 X101.740 Y102.651 E-0.07952 ; wipe and retract
G1 X101.852 Y102.444 E-0.06182 ; wipe and retract
G1 X101.917 Y102.381 E-0.02393 ; wipe and retract
G1 X101.976 Y102.341 E-0.01892 ; wipe and retract
G1 X102.066 Y102.321 E-0.02445 ; wipe and retract
G1 X102.397 Y102.018 E-0.11826 ; wipe and retract
G1 X102.709 Y101.339 E-0.19733 ; wipe and retract
G1 X102.697 Y101.224 E-0.03053 ; wipe and retract
G1 X102.751 Y100.835 E-0.10343 ; wipe and retract
G1 X102.729 Y100.330 E-0.13351 ; wipe and retract
G1 X102.751 Y100.238 E-0.02488 ; wipe and retract
G1 X102.732 Y99.826 E-0.10897 ; wipe and retract
G1 X102.781 Y99.580 E-0.06622 ; wipe and retract
G1 X102.775 Y99.516 E-0.01701 ; wipe and retract
G1 X102.885 Y99.192 E-0.09029 ; wipe and retract
G1 X102.926 Y99.124 E-0.02100 ; wipe and retract
G1 X103.054 Y99.074 E-0.03610 ; wipe and retract
G1 X103.283 Y99.093 E-0.06064 ; wipe and retract
G1 X103.381 Y99.209 E-0.04024 ; wipe and retract
G1 X103.412 Y99.405 E-0.05218 ; wipe and retract
G1 X103.492 Y99.613 E-0.05881 ; wipe and retract
G1 X103.538 Y99.997 E-0.10225 ; wipe and retract
G1 X103.528 Y100.069 E-0.01903 ; wipe and retract
G1 X103.569 Y100.536 E-0.12382 ; wipe and retract
G1 X103.501 Y100.705 E-0.04793 ; wipe and retract
G1 X103.292 Y101.071 E-0.11121 ; wipe and retract
G1 X102.940 Y101.549 E-0.15675 ; wipe and retract
G1 X102.789 Y101.824 E-0.08265 ; wipe and retract
G1 X102.743 Y102.025 E-0.05460 ; wipe and retract
G1 X102.645 Y102.223 E-0.05807 ; wipe and retract
G1 X102.654 Y102.435 E-0.05595 ; wipe and retract
G1 X102.625 Y102.611 E-0.04726 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X102.994 Y101.050 ; move to first infill point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.183699
G1 F2400.000
G1 X103.287 Y100.075 E0.01192 ; infill
G1 X103.170 Y100.799 F10800.000 ; move to first infill point
;WIDTH:0.386781
G1 F2400.000
G1 X103.147 Y100.298 E0.01434 ; infill
;WIDTH:0.359393
G1 X103.147 Y100.254 E0.00116 ; infill
;WIDTH:0.35139
G1 X103.126 Y99.856 E0.01024 ; infill
G1 X103.147 Y99.316 E0.01385 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.126 Y99.856 E-0.14250 ; wipe and retract
G1 X103.147 Y100.254 E-0.10534 ; wipe and retract
;WIPE_END
G1 E-2.15215 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X101.282 Y105.540 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.235 Y105.592 E0.00239 ; perimeter
G1 X101.242 Y105.581 E0.00043 ; perimeter
G1 X101.219 Y105.615 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X101.038 Y105.866 E0.01050 ; perimeter
G1 X100.907 Y106.013 E0.00667 ; perimeter
G1 X100.859 Y105.999 E0.00170 ; perimeter
G1 X100.759 Y105.922 E0.00426 ; perimeter
G1 X100.903 Y105.869 E0.00519 ; perimeter
G1 X101.172 Y105.652 E0.01169 ; perimeter
G1 X100.280 Y105.674 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.543 Y105.483 E0.01504 ; perimeter
G1 X100.667 Y105.440 E0.00607 ; perimeter
G1 X100.855 Y105.289 E0.01117 ; perimeter
G1 X100.908 Y105.200 E0.00483 ; perimeter
G1 X101.042 Y105.122 E0.00716 ; perimeter
G1 X101.164 Y104.870 E0.01295 ; perimeter
G1 X101.204 Y104.809 E0.00342 ; perimeter
G1 X101.278 Y104.752 E0.00430 ; perimeter
G1 X101.392 Y104.558 E0.01042 ; perimeter
G1 X101.502 Y104.533 E0.00524 ; perimeter
G1 X101.637 Y104.469 E0.00692 ; perimeter
G1 X101.816 Y104.618 E0.01082 ; perimeter
G1 X101.919 Y104.865 E0.01239 ; perimeter
G1 X101.918 Y105.366 E0.02318 ; perimeter
G1 X101.884 Y105.561 E0.00918 ; perimeter
G1 X101.858 Y105.630 E0.00341 ; perimeter
G1 X101.616 Y105.888 E0.01643 ; perimeter
G1 X101.414 Y106.168 E0.01597 ; perimeter
G1 X101.164 Y106.450 E0.01745 ; perimeter
G1 X101.017 Y106.511 E0.00737 ; perimeter
G1 X100.852 Y106.500 E0.00763 ; perimeter
G1 X100.607 Y106.427 E0.01189 ; perimeter
G1 X100.382 Y106.243 E0.01346 ; perimeter
G1 X100.235 Y105.999 E0.01316 ; perimeter
G1 X100.215 Y105.815 E0.00857 ; perimeter
G1 X100.255 Y105.729 E0.00441 ; perimeter
G1 X100.601 Y105.723 F10800.000 ; move inwards before travel
G1 X101.620 Y104.774 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.258131
G1 F2400.000
G1 X101.423 Y105.330 E0.01054 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.620 Y104.774 E-0.15550 ; wipe and retract
;WIPE_END
G1 E-2.24450 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X99.688 Y107.823 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.733 Y107.876 E0.00235 ; perimeter
G1 X99.709 Y107.927 E0.00191 ; perimeter
G1 X99.673 Y107.843 E0.00307 ; perimeter
G1 X99.389 Y108.948 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.385 Y109.036 E0.00298 ; perimeter
G1 X99.223 Y109.070 E0.00562 ; perimeter
G1 X99.341 Y108.983 E0.00494 ; perimeter
G1 X99.269 Y108.438 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.239 Y108.053 E0.01788 ; perimeter
G1 X99.060 Y107.631 E0.02124 ; perimeter
G1 X99.058 Y107.531 E0.00462 ; perimeter
G1 X99.117 Y107.352 E0.00873 ; perimeter
G1 X99.162 Y107.311 E0.00282 ; perimeter
G1 X99.295 Y107.253 E0.00671 ; perimeter
G1 X99.552 Y107.248 E0.01191 ; perimeter
G1 X99.698 Y107.279 E0.00694 ; perimeter
G1 X99.834 Y107.363 E0.00741 ; perimeter
G1 X99.967 Y107.408 E0.00648 ; perimeter
G1 X100.053 Y107.508 E0.00611 ; perimeter
G1 X100.154 Y107.548 E0.00507 ; perimeter
G1 X100.262 Y107.690 E0.00824 ; perimeter
G1 X100.274 Y107.873 E0.00847 ; perimeter
G1 X100.015 Y108.406 E0.02746 ; perimeter
G1 X99.870 Y108.979 E0.02740 ; perimeter
G1 X99.857 Y109.296 E0.01468 ; perimeter
G1 X99.660 Y109.471 E0.01222 ; perimeter
G1 X99.216 Y109.563 E0.02100 ; perimeter
G1 X98.943 Y109.551 E0.01266 ; perimeter
G1 X98.721 Y109.569 E0.01032 ; perimeter
G1 X98.399 Y109.537 E0.01499 ; perimeter
G1 X98.110 Y109.462 E0.01379 ; perimeter
G1 X97.928 Y109.374 E0.00939 ; perimeter
G1 X97.841 Y109.259 E0.00669 ; perimeter
G1 X97.827 Y109.163 E0.00448 ; perimeter
G1 X97.839 Y109.112 E0.00246 ; perimeter
G1 X97.883 Y109.055 E0.00333 ; perimeter
G1 X98.092 Y108.899 E0.01204 ; perimeter
G1 X98.444 Y108.770 E0.01738 ; perimeter
G1 X98.688 Y108.758 E0.01130 ; perimeter
G1 X98.944 Y108.676 E0.01249 ; perimeter
G1 X99.221 Y108.474 E0.01586 ; perimeter
G1 X99.646 Y108.354 F10800.000 ; move inwards before travel
G1 X99.554 Y108.314 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.183816
G1 F2400.000
G1 X99.598 Y108.496 E0.00219 ; infill
G1 X99.670 Y108.507 F10800.000 ; move to first infill point
;WIDTH:0.118268
G1 F2400.000
G1 X99.683 Y108.581 E0.00047 ; infill
G1 X99.665 Y108.711 E0.00082 ; infill
G1 X99.554 Y108.314 F10800.000 ; move to first infill point
;WIDTH:0.140368
G1 F2400.000
G1 X99.510 Y108.133 E0.00151 ; infill
G1 X98.945 Y109.038 F10800.000 ; move to first infill point
;WIDTH:0.181896
G1 F2400.000
G1 X98.120 Y109.199 E0.00971 ; infill
G1 X98.161 Y109.148 F10800.000 ; move to first infill point
;WIDTH:0.371725
G1 F2400.000
G1 X98.739 Y109.161 E0.01581 ; infill
;WIDTH:0.381808
G1 X98.980 Y109.116 E0.00690 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.739 Y109.161 E-0.06458 ; wipe and retract
;WIPE_END
G1 E-2.33542 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X97.600 Y113.664 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X97.619 Y113.701 E0.00139 ; perimeter
G1 X97.478 Y113.732 E0.00488 ; perimeter
G1 X97.547 Y113.693 E0.00269 ; perimeter
G1 X98.931 Y114.711 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.060 Y114.748 E0.00455 ; perimeter
G1 X98.974 Y114.838 E0.00423 ; perimeter
G1 X98.960 Y114.763 E0.00260 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.060 Y114.748 E-0.02662 ; wipe and retract
G1 X98.974 Y114.838 E-0.03300 ; wipe and retract
G1 X98.960 Y114.763 E-0.02028 ; wipe and retract
;WIPE_END
G1 E-2.32010 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X97.446 Y111.810 ; move to first perimeter point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.252 Y111.723 E0.00981 ; perimeter
G1 X96.802 Y111.312 E0.02825 ; perimeter
G1 X96.672 Y111.125 E0.01055 ; perimeter
G1 X96.642 Y111.006 E0.00568 ; perimeter
G1 X96.706 Y110.850 E0.00781 ; perimeter
G1 X96.824 Y110.780 E0.00634 ; perimeter
G1 X97.115 Y110.763 E0.01350 ; perimeter
G1 X97.407 Y110.836 E0.01396 ; perimeter
G1 X97.699 Y110.968 E0.01483 ; perimeter
G1 X98.446 Y111.424 E0.04056 ; perimeter
G1 X98.574 Y111.481 E0.00649 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.496 Y111.665 E0.00839 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.476 Y111.710 E0.00228 ; perimeter
G1 X98.222 Y111.928 E0.01549 ; perimeter
G1 X98.045 Y112.503 E0.02789 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X97.992 Y112.674 E0.00748 ; perimeter (bridge)
G1 X97.969 Y113.104 E0.01801 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X97.959 Y113.308 E0.00944 ; perimeter
G1 X98.180 Y113.738 E0.02241 ; perimeter
G1 X98.272 Y113.817 E0.00563 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.380 Y113.911 E0.00597 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.534 Y114.044 E0.00942 ; perimeter
G1 X98.904 Y114.201 E0.01863 ; perimeter
G1 X99.415 Y114.348 E0.02461 ; perimeter
G1 X99.654 Y114.343 E0.01110 ; perimeter
G1 X99.900 Y114.304 E0.01155 ; perimeter
G1 X99.963 Y114.328 E0.00312 ; perimeter
G1 X100.019 Y114.320 E0.00262 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.414 Y114.262 E0.01669 ; perimeter (bridge)
G1 X100.398 Y114.308 E0.00204 ; perimeter (bridge)
G1 X100.071 Y114.502 E0.01591 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.957 Y114.610 E0.00724 ; perimeter
G1 X99.749 Y114.718 E0.01084 ; perimeter
G1 X99.507 Y114.997 E0.01713 ; perimeter
G1 X99.260 Y115.236 E0.01590 ; perimeter
G1 X99.096 Y115.323 E0.00865 ; perimeter
G1 X98.870 Y115.365 E0.01061 ; perimeter
G1 X98.773 Y115.351 E0.00456 ; perimeter
G1 X98.667 Y115.306 E0.00536 ; perimeter
G1 X98.543 Y115.172 E0.00844 ; perimeter
G1 X98.501 Y114.932 E0.01131 ; perimeter
G1 X98.431 Y114.821 E0.00607 ; perimeter
G1 X98.394 Y114.574 E0.01155 ; perimeter
G1 X98.297 Y114.483 E0.00616 ; perimeter
G1 X98.236 Y114.249 E0.01118 ; perimeter
G1 X97.886 Y114.135 E0.01707 ; perimeter
G1 X97.484 Y114.225 E0.01904 ; perimeter
G1 X97.386 Y114.223 E0.00455 ; perimeter
G1 X96.868 Y114.458 E0.02638 ; perimeter
G1 X96.579 Y114.565 E0.01424 ; perimeter
G1 X96.377 Y114.587 E0.00942 ; perimeter
G1 X96.256 Y114.579 E0.00564 ; perimeter
G1 X96.141 Y114.541 E0.00559 ; perimeter
G1 X96.089 Y114.483 E0.00365 ; perimeter
G1 X96.084 Y114.308 E0.00811 ; perimeter
G1 X96.191 Y114.091 E0.01117 ; perimeter
G1 X96.476 Y113.802 E0.01883 ; perimeter
G1 X96.705 Y113.629 E0.01329 ; perimeter
G1 X97.074 Y113.459 E0.01884 ; perimeter
G1 X97.177 Y113.347 E0.00703 ; perimeter
G1 X97.486 Y113.176 E0.01632 ; perimeter
G1 X97.568 Y112.856 E0.01531 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X97.665 Y112.479 E0.01627 ; perimeter (bridge)
G1 X97.657 Y112.437 E0.00179 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X97.598 Y112.144 E0.01387 ; perimeter
G1 X97.470 Y111.864 E0.01423 ; perimeter
G1 X97.482 Y111.601 F10800.000 ; move inwards before travel
G1 X97.436 Y111.311 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.435098
G1 F2400.000
G1 X97.700 Y111.462 E0.00993 ; infill
G1 X98.061 Y111.747 E0.01500 ; infill
G1 X97.436 Y111.311 F10800.000 ; move to first infill point
;WIDTH:0.402123
G1 F2400.000
G1 X97.377 Y111.270 E0.00216 ; infill
;WIDTH:0.375802
G1 X97.354 Y111.255 E0.00074 ; infill
;WIDTH:0.368171
G1 X97.275 Y111.209 E0.00248 ; infill
;WIDTH:0.34939
G1 X96.902 Y111.032 E0.01054 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.275 Y111.209 E-0.10912 ; wipe and retract
;WIPE_END
G1 E-2.29088 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 X97.256 Y113.829 ; move to first infill point
G1 Z8.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.384348
G1 F2400.000
G1 X96.862 Y114.024 E0.01248 ; infill
;WIDTH:0.356368
G1 X96.721 Y114.102 E0.00420 ; infill
;WIDTH:0.33055
G1 X96.366 Y114.280 E0.00950 ; infill
;LAYER_CHANGE
;Z:8.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;8.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X96.721 Y114.102 E-0.10477 ; wipe and retract
;WIPE_END
G1 E-2.29523 F2400.000 ; retract
G1 Z8.275 F10800.000 ; lift Z
G1 Z8.400 ; move to next layer (41)
;AFTER_LAYER_CHANGE
;8.4
G1 Z8.475 ; lift Z
G1 X107.107 Y115.646 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.004 Y115.689 E0.00515 ; perimeter
G1 X106.923 Y115.757 E0.00493 ; perimeter
G1 X106.656 Y115.822 E0.01273 ; perimeter
G1 X106.298 Y115.833 E0.01656 ; perimeter
G1 X105.989 Y115.782 E0.01452 ; perimeter
G1 X105.628 Y115.677 E0.01743 ; perimeter
G1 X105.376 Y115.567 E0.01272 ; perimeter
G1 X105.229 Y115.456 E0.00852 ; perimeter
G1 X105.113 Y115.329 E0.00797 ; perimeter
G1 X105.073 Y115.180 E0.00715 ; perimeter
G1 X105.095 Y115.135 E0.00235 ; perimeter
G1 X105.233 Y115.047 E0.00756 ; perimeter
G1 X105.612 Y114.984 E0.01777 ; perimeter
G1 X106.300 Y115.071 E0.03211 ; perimeter
G1 X106.743 Y115.247 E0.02210 ; perimeter
G1 X107.009 Y115.438 E0.01516 ; perimeter
G1 X107.081 Y115.592 E0.00790 ; perimeter
G1 X106.996 Y115.644 F10800.000 ; move inwards before travel
G1 X106.696 Y115.573 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311366
G1 F2400.000
G1 X106.205 Y115.437 E0.01136 ; infill
G1 X105.908 Y115.384 E0.00673 ; infill
;WIDTH:0.280073
G1 X105.745 Y115.350 E0.00328 ; infill
;WIDTH:0.253786
G1 X105.419 Y115.261 E0.00594 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.745 Y115.350 E-0.08940 ; wipe and retract
;WIPE_END
G1 E-2.31060 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X108.714 Y115.754 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.982 Y115.570 E0.01506 ; perimeter
G1 X109.354 Y115.473 E0.01777 ; perimeter
G1 X109.893 Y115.396 E0.02525 ; perimeter
G1 X110.382 Y115.372 E0.02268 ; perimeter
G1 X110.762 Y115.393 E0.01764 ; perimeter
G1 X111.300 Y115.459 E0.02510 ; perimeter
G1 X111.738 Y115.573 E0.02094 ; perimeter
G1 X111.919 Y115.707 E0.01043 ; perimeter
G1 X111.929 Y115.753 E0.00219 ; perimeter
G1 X111.921 Y115.820 E0.00316 ; perimeter
G1 X111.754 Y115.931 E0.00927 ; perimeter
G1 X111.559 Y116.019 E0.00989 ; perimeter
G1 X111.121 Y116.108 E0.02071 ; perimeter
G1 X110.350 Y116.155 E0.03580 ; perimeter
G1 X110.050 Y116.154 E0.01387 ; perimeter
G1 X109.370 Y116.074 E0.03173 ; perimeter
G1 X109.115 Y116.018 E0.01209 ; perimeter
G1 X108.825 Y115.891 E0.01468 ; perimeter
G1 X108.745 Y115.805 E0.00543 ; perimeter
G1 X109.032 Y115.687 F10800.000 ; move inwards before travel
G1 X109.231 Y115.765 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.17196
G1 F2400.000
G1 X109.421 Y115.772 E0.00204 ; infill
;WIDTH:0.215769
G1 X109.590 Y115.770 E0.00243 ; infill
;WIDTH:0.259578
G1 X109.759 Y115.768 E0.00305 ; infill
;WIDTH:0.303386
G1 X109.929 Y115.766 E0.00367 ; infill
;WIDTH:0.327356
G1 X110.073 Y115.771 E0.00343 ; infill
;WIDTH:0.340681
G1 X110.730 Y115.762 E0.01625 ; infill
;WIDTH:0.210836
G1 X111.465 Y115.759 E0.01027 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.730 Y115.762 E-0.19411 ; wipe and retract
;WIPE_END
G1 E-2.20589 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X114.622 Y115.493 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.601 Y115.395 E0.00461 ; perimeter
G1 X114.635 Y115.192 E0.00955 ; perimeter
G1 X114.676 Y115.117 E0.00393 ; perimeter
G1 X114.802 Y115.000 E0.00801 ; perimeter
G1 X114.914 Y114.942 E0.00581 ; perimeter
G1 X115.051 Y114.916 E0.00648 ; perimeter
G1 X115.213 Y114.918 E0.00749 ; perimeter
G1 X115.328 Y114.963 E0.00571 ; perimeter
G1 X115.391 Y115.009 E0.00364 ; perimeter
G1 X115.492 Y115.178 E0.00909 ; perimeter
G1 X115.522 Y115.321 E0.00676 ; perimeter
G1 X115.506 Y115.399 E0.00370 ; perimeter
G1 X115.354 Y115.631 E0.01287 ; perimeter
G1 X115.213 Y115.750 E0.00854 ; perimeter
G1 X115.031 Y115.798 E0.00873 ; perimeter
G1 X114.858 Y115.754 E0.00824 ; perimeter
G1 X114.692 Y115.633 E0.00953 ; perimeter
G1 X114.649 Y115.546 E0.00448 ; perimeter
G1 X114.683 Y115.414 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.601 Y115.395 E-0.04177 ; wipe and retract
G1 X114.635 Y115.192 E-0.05441 ; wipe and retract
G1 X114.676 Y115.117 E-0.02237 ; wipe and retract
G1 X114.802 Y115.000 E-0.04565 ; wipe and retract
G1 X114.914 Y114.942 E-0.03310 ; wipe and retract
G1 X115.051 Y114.916 E-0.03690 ; wipe and retract
G1 X115.213 Y114.918 E-0.04267 ; wipe and retract
G1 X115.328 Y114.963 E-0.03254 ; wipe and retract
G1 X115.391 Y115.009 E-0.02073 ; wipe and retract
G1 X115.492 Y115.178 E-0.05177 ; wipe and retract
G1 X115.522 Y115.321 E-0.03853 ; wipe and retract
G1 X115.506 Y115.399 E-0.02109 ; wipe and retract
G1 X115.354 Y115.631 E-0.07331 ; wipe and retract
G1 X115.213 Y115.750 E-0.04865 ; wipe and retract
G1 X115.031 Y115.798 E-0.04971 ; wipe and retract
G1 X114.858 Y115.754 E-0.04697 ; wipe and retract
G1 X114.692 Y115.633 E-0.05427 ; wipe and retract
G1 X114.649 Y115.546 E-0.02554 ; wipe and retract
;WIPE_END
G1 E-1.66004 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X115.432 Y110.672 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.307 Y110.613 E0.00642 ; perimeter
G1 X115.231 Y110.526 E0.00534 ; perimeter
G1 X115.163 Y110.321 E0.01001 ; perimeter
G1 X115.186 Y110.025 E0.01378 ; perimeter
G1 X115.249 Y109.887 E0.00698 ; perimeter
G1 X115.489 Y109.771 E0.01236 ; perimeter
G1 X115.666 Y109.790 E0.00825 ; perimeter
G1 X115.761 Y109.857 E0.00539 ; perimeter
G1 X115.840 Y109.990 E0.00717 ; perimeter
G1 X115.877 Y110.170 E0.00851 ; perimeter
G1 X115.835 Y110.458 E0.01349 ; perimeter
G1 X115.780 Y110.558 E0.00526 ; perimeter
G1 X115.682 Y110.636 E0.00583 ; perimeter
G1 X115.560 Y110.676 E0.00593 ; perimeter
G1 X115.492 Y110.674 E0.00317 ; perimeter
G1 X115.394 Y110.539 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.307 Y110.613 E-0.05150 ; wipe and retract
G1 X115.231 Y110.526 E-0.03042 ; wipe and retract
G1 X115.163 Y110.321 E-0.05703 ; wipe and retract
G1 X115.186 Y110.025 E-0.07852 ; wipe and retract
G1 X115.249 Y109.887 E-0.03977 ; wipe and retract
G1 X115.489 Y109.771 E-0.07042 ; wipe and retract
G1 X115.666 Y109.790 E-0.04698 ; wipe and retract
G1 X115.761 Y109.857 E-0.03069 ; wipe and retract
G1 X115.840 Y109.990 E-0.04087 ; wipe and retract
G1 X115.877 Y110.170 E-0.04850 ; wipe and retract
G1 X115.835 Y110.458 E-0.07682 ; wipe and retract
G1 X115.780 Y110.558 E-0.02999 ; wipe and retract
G1 X115.682 Y110.636 E-0.03319 ; wipe and retract
G1 X115.560 Y110.676 E-0.03380 ; wipe and retract
G1 X115.492 Y110.674 E-0.01804 ; wipe and retract
;WIPE_END
G1 E-1.71344 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X115.638 Y108.445 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.504 Y108.480 E0.00646 ; perimeter
G1 X115.411 Y108.453 E0.00450 ; perimeter
G1 X115.281 Y108.353 E0.00756 ; perimeter
G1 X115.180 Y108.167 E0.00981 ; perimeter
G1 X115.111 Y107.886 E0.01339 ; perimeter
G1 X115.145 Y107.603 E0.01319 ; perimeter
G1 X115.186 Y107.465 E0.00670 ; perimeter
G1 X115.283 Y107.300 E0.00886 ; perimeter
G1 X115.376 Y107.223 E0.00558 ; perimeter
G1 X115.508 Y107.183 E0.00640 ; perimeter
G1 X115.650 Y107.236 E0.00703 ; perimeter
G1 X115.787 Y107.380 E0.00921 ; perimeter
G1 X115.883 Y107.613 E0.01168 ; perimeter
G1 X115.906 Y107.940 E0.01519 ; perimeter
G1 X115.875 Y108.111 E0.00805 ; perimeter
G1 X115.792 Y108.297 E0.00943 ; perimeter
G1 X115.682 Y108.404 E0.00711 ; perimeter
G1 X115.520 Y108.371 F10800.000 ; move inwards before travel
G1 X115.559 Y108.187 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343281
G1 F2400.000
G1 X115.508 Y107.862 E0.00822 ; infill
G1 X115.512 Y107.699 E0.00406 ; infill
;WIDTH:0.312728
G1 X115.479 Y107.451 E0.00562 ; infill
G1 X115.517 Y107.445 F10800.000 ; move to first infill point
;WIDTH:0.25221
G1 F2400.000
G1 X115.464 Y108.183 E0.01288 ; infill
G1 X115.603 Y107.565 F10800.000 ; move to first infill point
;WIDTH:0.215053
G1 F2400.000
G1 X115.552 Y107.892 E0.00473 ; infill
;WIDTH:0.183515
G1 X115.502 Y108.219 E0.00387 ; infill
G1 X115.501 Y108.218 F10800.000 ; move to first infill point
;WIDTH:0.298814
G1 F2400.000
G1 X115.565 Y107.496 E0.01542 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.501 Y108.218 E-0.19124 ; wipe and retract
;WIPE_END
G1 E-2.20876 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X115.553 Y104.809 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.383 Y104.793 E0.00792 ; perimeter
G1 X115.286 Y104.723 E0.00554 ; perimeter
G1 X115.163 Y104.523 E0.01084 ; perimeter
G1 X115.096 Y104.354 E0.00845 ; perimeter
G1 X114.881 Y103.622 E0.03535 ; perimeter
G1 X114.886 Y103.424 E0.00917 ; perimeter
G1 X114.949 Y103.304 E0.00628 ; perimeter
G1 X115.091 Y103.193 E0.00833 ; perimeter
G1 X115.310 Y103.166 E0.01026 ; perimeter
G1 X115.422 Y103.182 E0.00521 ; perimeter
G1 X115.531 Y103.243 E0.00579 ; perimeter
G1 X115.681 Y103.398 E0.00999 ; perimeter
G1 X115.794 Y103.777 E0.01830 ; perimeter
G1 X115.864 Y104.138 E0.01704 ; perimeter
G1 X115.870 Y104.259 E0.00561 ; perimeter
G1 X115.849 Y104.454 E0.00908 ; perimeter
G1 X115.794 Y104.632 E0.00865 ; perimeter
G1 X115.677 Y104.767 E0.00829 ; perimeter
G1 X115.610 Y104.790 E0.00328 ; perimeter
G1 X115.447 Y104.675 F10800.000 ; move inwards before travel
G1 X115.532 Y104.562 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.136366
G1 F2400.000
G1 X115.519 Y104.529 E0.00027 ; infill
;WIDTH:0.172812
G1 X115.506 Y104.497 E0.00038 ; infill
;WIDTH:0.21583
G1 X115.561 Y103.840 E0.00949 ; infill
G1 X115.291 Y103.577 F10800.000 ; move to first infill point
;WIDTH:0.35378
G1 F2400.000
G1 X115.390 Y103.876 E0.00815 ; infill
G1 X115.543 Y104.554 E0.01796 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.390 Y103.876 E-0.18340 ; wipe and retract
G1 X115.291 Y103.577 E-0.08316 ; wipe and retract
;WIPE_END
G1 E-2.13344 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X113.574 Y101.904 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.510 Y101.993 E0.00509 ; perimeter
G1 X113.436 Y102.023 E0.00370 ; perimeter
G1 X113.232 Y102.029 E0.00947 ; perimeter
G1 X113.061 Y101.971 E0.00836 ; perimeter
G1 X112.791 Y101.780 E0.01529 ; perimeter
G1 X112.602 Y101.571 E0.01306 ; perimeter
G1 X112.577 Y101.393 E0.00831 ; perimeter
G1 X112.655 Y101.007 E0.01827 ; perimeter
G1 X112.647 Y100.976 E0.00146 ; perimeter
G1 X112.717 Y100.863 E0.00618 ; perimeter
G1 X112.792 Y100.878 E0.00356 ; perimeter
G1 X113.032 Y100.788 E0.01187 ; perimeter
G1 X113.082 Y100.796 E0.00232 ; perimeter
G1 X113.282 Y100.873 E0.00993 ; perimeter
G1 X113.444 Y101.026 E0.01035 ; perimeter
G1 X113.556 Y101.285 E0.01306 ; perimeter
G1 X113.623 Y101.684 E0.01873 ; perimeter
G1 X113.587 Y101.845 E0.00766 ; perimeter
G1 X113.465 Y101.917 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.510 Y101.993 E-0.04397 ; wipe and retract
G1 X113.436 Y102.023 E-0.02107 ; wipe and retract
G1 X113.232 Y102.029 E-0.05393 ; wipe and retract
G1 X113.061 Y101.971 E-0.04764 ; wipe and retract
G1 X112.791 Y101.780 E-0.08712 ; wipe and retract
G1 X112.602 Y101.571 E-0.07441 ; wipe and retract
G1 X112.577 Y101.393 E-0.04732 ; wipe and retract
G1 X112.655 Y101.007 E-0.10410 ; wipe and retract
G1 X112.647 Y100.976 E-0.00832 ; wipe and retract
G1 X112.717 Y100.863 E-0.03522 ; wipe and retract
G1 X112.792 Y100.878 E-0.02028 ; wipe and retract
G1 X113.032 Y100.788 E-0.06762 ; wipe and retract
G1 X113.082 Y100.796 E-0.01320 ; wipe and retract
G1 X113.282 Y100.873 E-0.05657 ; wipe and retract
G1 X113.444 Y101.026 E-0.05897 ; wipe and retract
G1 X113.556 Y101.285 E-0.07439 ; wipe and retract
G1 X113.623 Y101.684 E-0.10668 ; wipe and retract
G1 X113.587 Y101.845 E-0.04361 ; wipe and retract
;WIPE_END
G1 E-1.43558 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X110.152 Y99.634 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.203 Y99.695 E0.00370 ; perimeter
G1 X110.228 Y99.841 E0.00684 ; perimeter
G1 X110.328 Y99.938 E0.00646 ; perimeter
G1 X110.343 Y100.007 E0.00329 ; perimeter
G1 X110.490 Y100.276 E0.01421 ; perimeter
G1 X110.556 Y100.472 E0.00959 ; perimeter
G1 X110.543 Y100.554 E0.00384 ; perimeter
G1 X110.431 Y100.674 E0.00762 ; perimeter
G1 X110.272 Y100.698 E0.00743 ; perimeter
G1 X110.048 Y100.671 E0.01046 ; perimeter
G1 X109.584 Y100.448 E0.02384 ; perimeter
G1 X109.335 Y100.243 E0.01496 ; perimeter
G1 X109.207 Y100.073 E0.00984 ; perimeter
G1 X109.131 Y99.826 E0.01195 ; perimeter
G1 X109.134 Y99.730 E0.00446 ; perimeter
G1 X109.162 Y99.671 E0.00304 ; perimeter
G1 X109.276 Y99.673 E0.00527 ; perimeter
G1 X109.456 Y99.504 E0.01143 ; perimeter
G1 X109.583 Y99.515 E0.00590 ; perimeter
G1 X109.790 Y99.476 E0.00975 ; perimeter
G1 X110.099 Y99.605 E0.01554 ; perimeter
G1 X110.142 Y99.713 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.203 Y99.695 E-0.03628 ; wipe and retract
G1 X110.228 Y99.841 E-0.03899 ; wipe and retract
G1 X110.328 Y99.938 E-0.03678 ; wipe and retract
G1 X110.343 Y100.007 E-0.01876 ; wipe and retract
G1 X110.490 Y100.276 E-0.08096 ; wipe and retract
G1 X110.556 Y100.472 E-0.05461 ; wipe and retract
G1 X110.543 Y100.554 E-0.02188 ; wipe and retract
G1 X110.431 Y100.674 E-0.04342 ; wipe and retract
G1 X110.272 Y100.698 E-0.04231 ; wipe and retract
G1 X110.048 Y100.671 E-0.05960 ; wipe and retract
G1 X109.584 Y100.448 E-0.13580 ; wipe and retract
G1 X109.335 Y100.243 E-0.08521 ; wipe and retract
G1 X109.207 Y100.073 E-0.05607 ; wipe and retract
G1 X109.131 Y99.826 E-0.06809 ; wipe and retract
G1 X109.134 Y99.730 E-0.02541 ; wipe and retract
G1 X109.162 Y99.671 E-0.01729 ; wipe and retract
G1 X109.276 Y99.673 E-0.03001 ; wipe and retract
G1 X109.456 Y99.504 E-0.06512 ; wipe and retract
G1 X109.583 Y99.515 E-0.03363 ; wipe and retract
G1 X109.790 Y99.476 E-0.05554 ; wipe and retract
G1 X110.099 Y99.605 E-0.08853 ; wipe and retract
;WIPE_END
G1 E-1.30569 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X106.128 Y99.146 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.257 Y99.049 E0.00747 ; perimeter
G1 X106.471 Y98.963 E0.01068 ; perimeter
G1 X106.647 Y98.956 E0.00819 ; perimeter
G1 X107.021 Y99.105 E0.01864 ; perimeter
G1 X107.184 Y99.278 E0.01100 ; perimeter
G1 X107.194 Y99.321 E0.00206 ; perimeter
G1 X107.141 Y99.345 E0.00269 ; perimeter
G1 X107.006 Y99.615 E0.01401 ; perimeter
G1 X106.929 Y99.680 E0.00466 ; perimeter
G1 X106.587 Y99.833 E0.01736 ; perimeter
G1 X106.341 Y99.826 E0.01139 ; perimeter
G1 X106.126 Y99.732 E0.01088 ; perimeter
G1 X106.054 Y99.612 E0.00647 ; perimeter
G1 X106.042 Y99.556 E0.00266 ; perimeter
G1 X106.061 Y99.294 E0.01216 ; perimeter
G1 X106.103 Y99.201 E0.00472 ; perimeter
G1 X106.287 Y99.172 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.257 Y99.049 E-0.05697 ; wipe and retract
G1 X106.471 Y98.963 E-0.06083 ; wipe and retract
G1 X106.647 Y98.956 E-0.04667 ; wipe and retract
G1 X107.021 Y99.105 E-0.10618 ; wipe and retract
G1 X107.184 Y99.278 E-0.06265 ; wipe and retract
G1 X107.194 Y99.321 E-0.01175 ; wipe and retract
G1 X107.141 Y99.345 E-0.01530 ; wipe and retract
G1 X107.006 Y99.615 E-0.07979 ; wipe and retract
G1 X106.929 Y99.680 E-0.02654 ; wipe and retract
G1 X106.587 Y99.833 E-0.09891 ; wipe and retract
G1 X106.341 Y99.826 E-0.06489 ; wipe and retract
G1 X106.126 Y99.732 E-0.06199 ; wipe and retract
G1 X106.054 Y99.612 E-0.03687 ; wipe and retract
G1 X106.042 Y99.556 E-0.01513 ; wipe and retract
G1 X106.061 Y99.294 E-0.06928 ; wipe and retract
G1 X106.103 Y99.201 E-0.02691 ; wipe and retract
;WIPE_END
G1 E-1.55933 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X102.934 Y101.129 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.793 Y100.215 E0.04287 ; perimeter
G1 X102.726 Y100.025 E0.00933 ; perimeter
G1 X102.699 Y99.571 E0.02107 ; perimeter
G1 X102.652 Y99.191 E0.01773 ; perimeter
G1 X102.623 Y99.097 E0.00455 ; perimeter
G1 X102.643 Y99.065 E0.00176 ; perimeter
G1 X102.645 Y98.880 E0.00857 ; perimeter
G1 X102.901 Y98.770 E0.01294 ; perimeter
G1 X103.451 Y98.775 E0.02548 ; perimeter
G1 X103.474 Y98.849 E0.00355 ; perimeter
G1 X103.516 Y98.899 E0.00303 ; perimeter
G1 X103.560 Y99.159 E0.01222 ; perimeter
G1 X103.500 Y99.553 E0.01849 ; perimeter
G1 X103.530 Y99.833 E0.01304 ; perimeter
G1 X103.470 Y100.377 E0.02535 ; perimeter
G1 X103.382 Y100.608 E0.01144 ; perimeter
G1 X103.163 Y100.918 E0.01760 ; perimeter
G1 X102.978 Y101.089 E0.01167 ; perimeter
G1 X102.987 Y100.733 F10800.000 ; move inwards before travel
G1 X103.093 Y100.581 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.364647
G1 F2400.000
G1 X103.121 Y99.828 E0.02017 ; infill
G1 X103.098 Y99.523 E0.00817 ; infill
;WIDTH:0.406548
G1 X103.102 Y99.268 E0.00772 ; infill
;WIDTH:0.44845
G1 X103.106 Y99.013 E0.00861 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.102 Y99.268 E-0.06736 ; wipe and retract
;WIPE_END
G1 E-2.33264 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X102.432 Y102.264 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.522 Y102.381 E0.00684 ; perimeter
G1 X102.540 Y102.512 E0.00613 ; perimeter
G1 X102.529 Y102.810 E0.01379 ; perimeter
G1 X102.496 Y102.921 E0.00540 ; perimeter
G1 X102.402 Y103.087 E0.00882 ; perimeter
G1 X102.272 Y103.188 E0.00762 ; perimeter
G1 X102.017 Y103.246 E0.01212 ; perimeter
G1 X101.954 Y103.248 E0.00292 ; perimeter
G1 X101.767 Y103.154 E0.00966 ; perimeter
G1 X101.670 Y102.978 E0.00935 ; perimeter
G1 X101.662 Y102.916 E0.00287 ; perimeter
G1 X101.690 Y102.667 E0.01161 ; perimeter
G1 X101.771 Y102.541 E0.00695 ; perimeter
G1 X101.983 Y102.394 E0.01194 ; perimeter
G1 X102.156 Y102.355 E0.00823 ; perimeter
G1 X102.247 Y102.272 E0.00573 ; perimeter
G1 X102.372 Y102.266 E0.00580 ; perimeter
G1 X102.435 Y102.411 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.522 Y102.381 E-0.04978 ; wipe and retract
G1 X102.540 Y102.512 E-0.03491 ; wipe and retract
G1 X102.529 Y102.810 E-0.07857 ; wipe and retract
G1 X102.496 Y102.921 E-0.03079 ; wipe and retract
G1 X102.402 Y103.087 E-0.05023 ; wipe and retract
G1 X102.272 Y103.188 E-0.04342 ; wipe and retract
G1 X102.017 Y103.246 E-0.06904 ; wipe and retract
G1 X101.954 Y103.248 E-0.01665 ; wipe and retract
G1 X101.767 Y103.154 E-0.05504 ; wipe and retract
G1 X101.670 Y102.978 E-0.05328 ; wipe and retract
G1 X101.662 Y102.916 E-0.01632 ; wipe and retract
G1 X101.690 Y102.667 E-0.06611 ; wipe and retract
G1 X101.771 Y102.541 E-0.03961 ; wipe and retract
G1 X101.983 Y102.394 E-0.06800 ; wipe and retract
G1 X102.156 Y102.355 E-0.04686 ; wipe and retract
G1 X102.247 Y102.272 E-0.03263 ; wipe and retract
G1 X102.372 Y102.266 E-0.03305 ; wipe and retract
;WIPE_END
G1 E-1.61569 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X101.476 Y105.326 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.479 Y105.441 E0.00391 ; perimeter
G1 X101.449 Y105.587 E0.00502 ; perimeter
G1 X101.015 Y106.164 E0.02442 ; perimeter
G1 X100.926 Y106.079 E0.00417 ; perimeter
G1 X100.869 Y105.970 E0.00416 ; perimeter
G1 X101.014 Y105.870 E0.00594 ; perimeter
G1 X101.275 Y105.628 E0.01207 ; perimeter
G1 X101.443 Y105.376 E0.01023 ; perimeter
G1 X101.643 Y104.591 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.723 Y104.598 E0.00372 ; perimeter
G1 X101.801 Y104.671 E0.00498 ; perimeter
G1 X101.942 Y104.933 E0.01375 ; perimeter
G1 X101.962 Y105.472 E0.02498 ; perimeter
G1 X101.931 Y105.673 E0.00943 ; perimeter
G1 X101.875 Y105.821 E0.00733 ; perimeter
G1 X101.299 Y106.589 E0.04447 ; perimeter
G1 X101.126 Y106.739 E0.01062 ; perimeter
G1 X101.036 Y106.753 E0.00420 ; perimeter
G1 X100.808 Y106.612 E0.01245 ; perimeter
G1 X100.617 Y106.465 E0.01117 ; perimeter
G1 X100.519 Y106.342 E0.00725 ; perimeter
G1 X100.348 Y106.009 E0.01733 ; perimeter
G1 X100.338 Y105.892 E0.00544 ; perimeter
G1 X100.444 Y105.677 E0.01113 ; perimeter
G1 X100.712 Y105.493 E0.01504 ; perimeter
G1 X100.905 Y105.313 E0.01223 ; perimeter
G1 X101.267 Y104.769 E0.03027 ; perimeter
G1 X101.426 Y104.641 E0.00948 ; perimeter
G1 X101.584 Y104.605 E0.00749 ; perimeter
G1 X101.689 Y104.657 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.723 Y104.598 E-0.03661 ; wipe and retract
G1 X101.801 Y104.671 E-0.02838 ; wipe and retract
G1 X101.942 Y104.933 E-0.07832 ; wipe and retract
G1 X101.962 Y105.472 E-0.14230 ; wipe and retract
G1 X101.931 Y105.673 E-0.05370 ; wipe and retract
G1 X101.875 Y105.821 E-0.04177 ; wipe and retract
G1 X101.299 Y106.589 E-0.25334 ; wipe and retract
G1 X101.126 Y106.739 E-0.06050 ; wipe and retract
G1 X101.036 Y106.753 E-0.02391 ; wipe and retract
G1 X100.808 Y106.612 E-0.07090 ; wipe and retract
G1 X100.617 Y106.465 E-0.06366 ; wipe and retract
G1 X100.519 Y106.342 E-0.04133 ; wipe and retract
G1 X100.348 Y106.009 E-0.09876 ; wipe and retract
G1 X100.338 Y105.892 E-0.03100 ; wipe and retract
G1 X100.444 Y105.677 E-0.06339 ; wipe and retract
G1 X100.712 Y105.493 E-0.08570 ; wipe and retract
G1 X100.905 Y105.313 E-0.06968 ; wipe and retract
G1 X101.267 Y104.769 E-0.17245 ; wipe and retract
G1 X101.426 Y104.641 E-0.05399 ; wipe and retract
G1 X101.584 Y104.605 E-0.04267 ; wipe and retract
;WIPE_END
G1 E-0.88765 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X99.958 Y107.918 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.836 Y108.062 E0.00639 ; perimeter
G1 X99.755 Y108.265 E0.00740 ; perimeter
G1 X99.742 Y107.843 E0.01430 ; perimeter
G1 X99.901 Y107.898 E0.00571 ; perimeter
G1 X99.528 Y108.869 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.579 Y109.114 E0.00848 ; perimeter
G1 X99.435 Y109.131 E0.00491 ; perimeter
G1 X99.163 Y109.112 E0.00921 ; perimeter
G1 X99.478 Y108.902 E0.01281 ; perimeter
G1 X99.210 Y108.501 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.279 Y108.455 E0.00382 ; perimeter
G1 X99.261 Y107.881 E0.02663 ; perimeter
G1 X99.212 Y107.762 E0.00594 ; perimeter
G1 X99.209 Y107.568 E0.00898 ; perimeter
G1 X99.269 Y107.430 E0.00701 ; perimeter
G1 X99.447 Y107.342 E0.00921 ; perimeter
G1 X99.796 Y107.346 E0.01617 ; perimeter
G1 X100.377 Y107.553 E0.02854 ; perimeter
G1 X100.498 Y107.686 E0.00837 ; perimeter
G1 X100.509 Y107.878 E0.00887 ; perimeter
G1 X100.372 Y108.175 E0.01517 ; perimeter
G1 X100.255 Y108.313 E0.00837 ; perimeter
G1 X100.025 Y108.890 E0.02876 ; perimeter
G1 X100.076 Y109.133 E0.01153 ; perimeter
G1 X100.231 Y109.356 E0.01256 ; perimeter
G1 X100.227 Y109.462 E0.00493 ; perimeter
G1 X100.256 Y109.609 E0.00692 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.260 Y109.628 E0.00083 ; perimeter (bridge)
G1 X100.238 Y109.624 E0.00093 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.152 Y109.608 E0.00404 ; perimeter
G1 X99.960 Y109.658 E0.00917 ; perimeter
G1 X99.559 Y109.598 E0.01879 ; perimeter
G1 X99.465 Y109.617 E0.00445 ; perimeter
G1 X99.059 Y109.588 E0.01883 ; perimeter
G1 X98.962 Y109.553 E0.00478 ; perimeter
G1 X98.615 Y109.518 E0.01617 ; perimeter
G1 X98.459 Y109.470 E0.00757 ; perimeter
G1 X98.209 Y109.330 E0.01327 ; perimeter
G1 X98.145 Y109.250 E0.00473 ; perimeter
G1 X98.124 Y109.164 E0.00410 ; perimeter
G1 X98.150 Y109.087 E0.00378 ; perimeter
G1 X98.370 Y108.885 E0.01381 ; perimeter
G1 X98.701 Y108.758 E0.01642 ; perimeter
G1 X98.864 Y108.732 E0.00767 ; perimeter
G1 X99.160 Y108.534 E0.01648 ; perimeter
G1 X99.283 Y108.541 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.279 Y108.455 E-0.03762 ; wipe and retract
G1 X99.261 Y107.881 E-0.15170 ; wipe and retract
G1 X99.212 Y107.762 E-0.03385 ; wipe and retract
G1 X99.209 Y107.568 E-0.05117 ; wipe and retract
G1 X99.269 Y107.430 E-0.03991 ; wipe and retract
G1 X99.447 Y107.342 E-0.05247 ; wipe and retract
G1 X99.796 Y107.346 E-0.09212 ; wipe and retract
G1 X100.377 Y107.553 E-0.16260 ; wipe and retract
G1 X100.498 Y107.686 E-0.04767 ; wipe and retract
G1 X100.509 Y107.878 E-0.05055 ; wipe and retract
G1 X100.372 Y108.175 E-0.08640 ; wipe and retract
G1 X100.255 Y108.313 E-0.04766 ; wipe and retract
G1 X100.025 Y108.890 E-0.16384 ; wipe and retract
G1 X100.076 Y109.133 E-0.06570 ; wipe and retract
G1 X100.231 Y109.356 E-0.07158 ; wipe and retract
G1 X100.227 Y109.462 E-0.02809 ; wipe and retract
G1 X100.256 Y109.609 E-0.03944 ; wipe and retract
;WIPE_END
G1 E-1.17763 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X97.854 Y111.540 ; move to first perimeter point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X97.950 Y111.599 E0.00382 ; perimeter
G1 X98.080 Y111.639 E0.00461 ; perimeter
G1 X98.032 Y111.671 E0.00196 ; perimeter
G1 X97.930 Y111.834 E0.00651 ; perimeter
G1 X97.924 Y111.761 E0.00250 ; perimeter
G1 X97.745 Y111.509 E0.01043 ; perimeter
G1 X97.796 Y111.524 E0.00179 ; perimeter
G1 X97.661 Y113.464 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X97.776 Y113.637 E0.00704 ; perimeter
G1 X97.817 Y113.765 E0.00456 ; perimeter
G1 X97.405 Y113.757 E0.01394 ; perimeter
G1 X97.621 Y113.509 E0.01114 ; perimeter
G1 X98.860 Y114.529 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.111 Y114.631 E0.00919 ; perimeter
G1 X99.241 Y114.632 E0.00438 ; perimeter
G1 X99.003 Y114.763 E0.00920 ; perimeter
G1 X98.891 Y114.580 E0.00726 ; perimeter
G1 X98.068 Y114.308 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.764 Y114.247 E0.01436 ; perimeter
G1 X97.467 Y114.241 E0.01377 ; perimeter
G1 X97.151 Y114.350 E0.01548 ; perimeter
G1 X96.615 Y114.431 E0.02513 ; perimeter
G1 X96.441 Y114.408 E0.00811 ; perimeter
G1 X96.373 Y114.335 E0.00462 ; perimeter
G1 X96.388 Y114.095 E0.01110 ; perimeter
G1 X96.499 Y113.888 E0.01089 ; perimeter
G1 X96.704 Y113.665 E0.01402 ; perimeter
G1 X96.915 Y113.486 E0.01283 ; perimeter
G1 X97.060 Y113.420 E0.00736 ; perimeter
G1 X97.342 Y113.096 E0.01992 ; perimeter
G1 X97.540 Y112.450 E0.03128 ; perimeter
G1 X97.486 Y112.298 E0.00746 ; perimeter
G1 X97.455 Y111.933 E0.01697 ; perimeter
G1 X97.309 Y111.727 E0.01169 ; perimeter
G1 X97.155 Y111.588 E0.00960 ; perimeter
G1 X97.015 Y111.415 E0.01029 ; perimeter
G1 X96.904 Y111.247 E0.00934 ; perimeter
G1 X96.889 Y111.147 E0.00467 ; perimeter
G1 X96.960 Y110.965 E0.00904 ; perimeter
G1 X97.069 Y110.908 E0.00571 ; perimeter
G1 X97.356 Y110.891 E0.01331 ; perimeter
G1 X97.572 Y110.934 E0.01020 ; perimeter
G1 X97.719 Y111.001 E0.00746 ; perimeter
G1 X98.050 Y111.095 E0.01594 ; perimeter
G1 X98.150 Y111.157 E0.00547 ; perimeter
G1 X98.406 Y111.235 E0.01238 ; perimeter
G1 X99.055 Y111.314 E0.03028 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.175 Y111.329 E0.00504 ; perimeter (bridge)
G1 X99.348 Y111.397 E0.00778 ; perimeter (bridge)
G1 X99.097 Y111.530 E0.01184 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.818 Y111.679 E0.01465 ; perimeter
G1 X98.567 Y111.898 E0.01543 ; perimeter
G1 X98.384 Y112.017 E0.01010 ; perimeter
G1 X98.315 Y112.127 E0.00603 ; perimeter
G1 X98.146 Y112.521 E0.01987 ; perimeter
G1 X98.119 Y113.283 E0.03531 ; perimeter
G1 X98.215 Y113.426 E0.00796 ; perimeter
G1 X98.301 Y113.699 E0.01324 ; perimeter
G1 X98.726 Y113.954 E0.02295 ; perimeter
G1 X99.208 Y114.150 E0.02412 ; perimeter
G1 X99.757 Y114.157 E0.02544 ; perimeter
G1 X99.934 Y114.110 E0.00845 ; perimeter
G1 X100.321 Y114.052 E0.01813 ; perimeter
G1 X100.919 Y113.892 E0.02869 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.418 Y113.759 E0.02157 ; perimeter (bridge)
G1 X101.554 Y113.790 E0.00583 ; perimeter (bridge)
G1 X101.693 Y113.890 E0.00713 ; perimeter (bridge)
G1 X101.726 Y113.942 E0.00258 ; perimeter (bridge)
G1 X101.723 Y114.012 E0.00297 ; perimeter (bridge)
G1 X101.536 Y114.063 E0.00809 ; perimeter (bridge)
G1 X101.211 Y114.188 E0.01455 ; perimeter (bridge)
G1 X101.174 Y114.218 E0.00198 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.730 Y114.371 E0.02177 ; perimeter
G1 X100.559 Y114.474 E0.00924 ; perimeter
G1 X100.119 Y114.673 E0.02234 ; perimeter
G1 X99.811 Y114.772 E0.01501 ; perimeter
G1 X99.665 Y114.940 E0.01033 ; perimeter
G1 X99.420 Y115.087 E0.01321 ; perimeter
G1 X99.099 Y115.258 E0.01687 ; perimeter
G1 X98.969 Y115.275 E0.00606 ; perimeter
G1 X98.768 Y115.236 E0.00947 ; perimeter
G1 X98.625 Y115.120 E0.00858 ; perimeter
G1 X98.572 Y115.032 E0.00475 ; perimeter
G1 X98.560 Y114.964 E0.00320 ; perimeter
G1 X98.334 Y114.592 E0.02018 ; perimeter
G1 X98.109 Y114.351 E0.01524 ; perimeter
G1 X98.042 Y113.999 F10800.000 ; move inwards before travel
G1 X98.348 Y114.117 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23007
G1 F2400.000
G1 X98.246 Y114.035 E0.00203 ; infill
;WIDTH:0.194058
G1 X98.223 Y114.019 E0.00036 ; infill
G1 X98.348 Y114.117 F10800.000 ; move to first infill point
;WIDTH:0.266083
G1 F2400.000
G1 X98.449 Y114.199 E0.00242 ; infill
;WIDTH:0.302096
G1 X98.551 Y114.281 E0.00281 ; infill
;WIDTH:0.309626
G1 X98.678 Y114.370 E0.00344 ; infill
G1 X97.303 Y114.019 F10800.000 ; move to first infill point
;WIDTH:0.132311
G1 F2400.000
G1 X97.191 Y114.036 E0.00085 ; infill
;WIDTH:0.167702
G1 X97.078 Y114.054 E0.00118 ; infill
;WIDTH:0.201001
G1 X96.882 Y114.067 E0.00258 ; infill
;WIDTH:0.244655
G1 X96.809 Y114.056 E0.00124 ; infill
G1 X96.826 Y114.004 E0.00092 ; infill
;WIDTH:0.116716
G1 X96.842 Y113.952 E0.00034 ; infill
G1 X96.908 Y113.878 E0.00061 ; infill
G1 X97.126 Y113.678 E0.00181 ; infill
G1 X97.764 Y112.969 F10800.000 ; move to first infill point
;WIDTH:0.293528
G1 F2400.000
G1 X97.792 Y112.801 E0.00355 ; infill
;WIDTH:0.161547
G1 X97.853 Y112.444 E0.00357 ; infill
;WIDTH:0.173982
G1 X97.896 Y112.074 E0.00407 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.853 Y112.444 E-0.09844 ; wipe and retract
;WIPE_END
G1 E-2.30156 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 X100.195 Y114.339 ; move to first infill point
G1 Z8.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.119003
G1 F2400.000
G1 X99.472 Y114.564 E0.00479 ; infill
G1 X99.469 Y114.554 F10800.000 ; move to first infill point
;WIDTH:0.266989
G1 F2400.000
G1 X99.597 Y114.497 E0.00261 ; infill
;WIDTH:0.154554
G1 X100.199 Y114.353 E0.00574 ; infill
;LAYER_CHANGE
;Z:8.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;8.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.597 Y114.497 E-0.16323 ; wipe and retract
;WIPE_END
G1 E-2.23677 F2400.000 ; retract
G1 Z8.475 F10800.000 ; lift Z
G1 Z8.600 ; move to next layer (42)
;AFTER_LAYER_CHANGE
;8.6
G1 Z8.675 ; lift Z
G1 X97.954 Y111.961 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X97.949 Y111.789 E0.00583 ; perimeter
G1 X97.764 Y111.524 E0.01096 ; perimeter
G1 X98.220 Y111.623 E0.01579 ; perimeter
G1 X98.127 Y111.683 E0.00373 ; perimeter
G1 X97.986 Y111.910 E0.00907 ; perimeter
G1 X97.735 Y113.277 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X97.752 Y113.482 E0.00694 ; perimeter
G1 X98.009 Y113.878 E0.01601 ; perimeter
G1 X97.798 Y113.776 E0.00794 ; perimeter
G1 X97.390 Y113.742 E0.01384 ; perimeter
G1 X97.545 Y113.597 E0.00718 ; perimeter
G1 X97.637 Y113.399 E0.00739 ; perimeter
G1 X97.698 Y113.324 E0.00325 ; perimeter
G1 X98.858 Y114.486 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.243 Y114.617 E0.01377 ; perimeter
G1 X99.117 Y114.678 E0.00475 ; perimeter
G1 X99.041 Y114.689 E0.00258 ; perimeter
G1 X98.901 Y114.528 E0.00724 ; perimeter
G1 X98.148 Y114.398 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X97.849 Y114.338 E0.01412 ; perimeter
G1 X97.668 Y114.249 E0.00937 ; perimeter
G1 X97.372 Y114.224 E0.01375 ; perimeter
G1 X96.944 Y114.276 E0.01995 ; perimeter
G1 X96.671 Y114.228 E0.01285 ; perimeter
G1 X96.620 Y114.161 E0.00391 ; perimeter
G1 X96.637 Y113.957 E0.00950 ; perimeter
G1 X96.730 Y113.778 E0.00935 ; perimeter
G1 X96.944 Y113.500 E0.01625 ; perimeter
G1 X97.147 Y113.309 E0.01292 ; perimeter
G1 X97.225 Y113.142 E0.00853 ; perimeter
G1 X97.320 Y113.024 E0.00701 ; perimeter
G1 X97.487 Y112.508 E0.02514 ; perimeter
G1 X97.471 Y111.949 E0.02588 ; perimeter
G1 X97.353 Y111.782 E0.00950 ; perimeter
G1 X97.230 Y111.522 E0.01331 ; perimeter
G1 X97.133 Y111.364 E0.00858 ; perimeter
G1 X97.122 Y111.242 E0.00569 ; perimeter
G1 X97.194 Y111.083 E0.00811 ; perimeter
G1 X97.297 Y111.027 E0.00542 ; perimeter
G1 X97.555 Y111.006 E0.01196 ; perimeter
G1 X97.836 Y111.041 E0.01314 ; perimeter
G1 X98.292 Y111.145 E0.02166 ; perimeter
G1 X98.525 Y111.123 E0.01084 ; perimeter
G1 X99.053 Y111.153 E0.02452 ; perimeter
G1 X99.448 Y111.128 E0.01833 ; perimeter
G1 X99.746 Y111.147 E0.01380 ; perimeter
G1 X99.913 Y111.192 E0.00804 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.254 Y111.214 E0.01425 ; perimeter (bridge)
G1 X100.254 Y111.239 E0.00104 ; perimeter (bridge)
G1 X99.902 Y111.443 E0.01701 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.742 Y111.536 E0.00857 ; perimeter
G1 X99.542 Y111.586 E0.00955 ; perimeter
G1 X99.030 Y111.786 E0.02548 ; perimeter
G1 X98.722 Y111.871 E0.01482 ; perimeter
G1 X98.480 Y112.029 E0.01335 ; perimeter
G1 X98.333 Y112.265 E0.01288 ; perimeter
G1 X98.173 Y112.707 E0.02178 ; perimeter
G1 X98.222 Y113.321 E0.02855 ; perimeter
G1 X98.464 Y113.693 E0.02050 ; perimeter
G1 X98.890 Y113.988 E0.02404 ; perimeter
G1 X99.354 Y114.145 E0.02270 ; perimeter
G1 X99.773 Y114.034 E0.02006 ; perimeter
G1 X99.925 Y114.036 E0.00705 ; perimeter
G1 X100.144 Y113.978 E0.01050 ; perimeter
G1 X101.224 Y113.644 E0.05235 ; perimeter
G1 X101.461 Y113.465 E0.01374 ; perimeter
G1 X101.527 Y113.450 E0.00316 ; perimeter
G1 X101.760 Y113.325 E0.01223 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.815 Y113.296 E0.00259 ; perimeter (bridge)
G1 X101.896 Y113.312 E0.00347 ; perimeter (bridge)
G1 X101.929 Y113.444 E0.00566 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.223 Y114.020 E0.02995 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.475 Y114.188 E0.01266 ; perimeter (bridge)
G1 X102.539 Y114.304 E0.00552 ; perimeter (bridge)
G1 X102.219 Y114.336 E0.01345 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.584 Y114.308 E0.02942 ; perimeter
G1 X101.163 Y114.373 E0.01974 ; perimeter
G1 X100.626 Y114.550 E0.02618 ; perimeter
G1 X99.906 Y114.831 E0.03579 ; perimeter
G1 X99.260 Y115.144 E0.03327 ; perimeter
G1 X99.012 Y115.180 E0.01162 ; perimeter
G1 X98.835 Y115.140 E0.00839 ; perimeter
G1 X98.692 Y115.032 E0.00830 ; perimeter
G1 X98.618 Y114.923 E0.00611 ; perimeter
G1 X98.375 Y114.693 E0.01548 ; perimeter
G1 X98.185 Y114.445 E0.01448 ; perimeter
G1 X98.114 Y114.095 F10800.000 ; move inwards before travel
G1 X98.318 Y114.223 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.259979
G1 F2400.000
G1 X98.541 Y114.335 E0.00450 ; infill
G1 X98.623 Y114.217 E0.00259 ; infill
;WIDTH:0.241365
G1 X98.595 Y114.181 E0.00074 ; infill
;WIDTH:0.213543
G1 X98.519 Y114.102 E0.00156 ; infill
;WIDTH:0.174669
G1 X98.443 Y114.024 E0.00120 ; infill
;WIDTH:0.135795
G1 X98.366 Y113.945 E0.00085 ; infill
G1 X99.494 Y114.358 F10800.000 ; move to first infill point
;WIDTH:0.337085
G1 F2400.000
G1 X99.883 Y114.423 E0.00964 ; infill
G1 X99.954 Y114.410 E0.00178 ; infill
;WIDTH:0.239765
G1 X101.091 Y114.040 E0.01957 ; infill
;WIDTH:0.281806
G1 X101.371 Y113.976 E0.00570 ; infill
;WIDTH:0.29567
G1 X101.849 Y113.820 E0.01057 ; infill
G1 X101.749 Y113.626 F10800.000 ; move to first infill point
;WIDTH:0.376226
G1 F2400.000
G1 X101.702 Y113.745 E0.00353 ; infill
;WIDTH:0.42511
G1 X101.656 Y113.863 E0.00405 ; infill
;WIDTH:0.437484
G1 X101.122 Y113.928 E0.01766 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.656 Y113.863 E-0.14207 ; wipe and retract
;WIPE_END
G1 E-2.25793 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X99.287 Y111.403 ; move to first infill point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.128836
G1 F2400.000
G1 X98.787 Y111.505 E0.00365 ; infill
G1 X98.910 Y111.476 F10800.000 ; move to first infill point
;WIDTH:0.222633
G1 F2400.000
G1 X98.843 Y111.449 E0.00107 ; infill
;WIDTH:0.176234
G1 X98.686 Y111.427 E0.00175 ; infill
;WIDTH:0.149728
G1 X98.530 Y111.405 E0.00140 ; infill
;WIDTH:0.123221
G1 X98.420 Y111.398 E0.00074 ; infill
G1 X97.904 Y112.198 F10800.000 ; move to first infill point
;WIDTH:0.354228
G1 F2400.000
G1 X97.877 Y112.368 E0.00447 ; infill
;WIDTH:0.319043
G1 X97.850 Y112.539 E0.00397 ; infill
;WIDTH:0.283857
G1 X97.840 Y112.578 E0.00081 ; infill
;WIDTH:0.275565
G1 X97.778 Y112.693 E0.00252 ; infill
;WIDTH:0.23088
G1 X97.717 Y112.806 E0.00202 ; infill
;WIDTH:0.186227
G1 X97.655 Y112.920 E0.00154 ; infill
;WIDTH:0.141574
G1 X97.594 Y113.034 E0.00106 ; infill
G1 X97.131 Y113.986 F10800.000 ; move to first infill point
;WIDTH:0.128113
G1 F2400.000
G1 X96.892 Y113.982 E0.00169 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X97.131 Y113.986 E-0.06300 ; wipe and retract
;WIPE_END
G1 E-2.33700 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X101.109 Y106.316 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.013 Y106.180 E0.00565 ; perimeter
G1 X100.951 Y106.035 E0.00532 ; perimeter
G1 X101.112 Y105.907 E0.00699 ; perimeter
G1 X101.384 Y105.577 E0.01448 ; perimeter
G1 X101.516 Y105.318 E0.00983 ; perimeter
G1 X101.524 Y105.588 E0.00914 ; perimeter
G1 X101.508 Y105.740 E0.00519 ; perimeter
G1 X101.139 Y106.264 E0.02168 ; perimeter
G1 X100.092 Y107.910 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.830 Y108.259 E0.01476 ; perimeter
G1 X99.773 Y108.410 E0.00547 ; perimeter
G1 X99.771 Y108.243 E0.00566 ; perimeter
G1 X99.824 Y107.908 E0.01148 ; perimeter
G1 X100.032 Y107.910 E0.00703 ; perimeter
G1 X99.669 Y108.801 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.654 Y108.995 E0.00661 ; perimeter
G1 X99.740 Y109.206 E0.00769 ; perimeter
G1 X99.648 Y109.164 E0.00340 ; perimeter
G1 X99.361 Y109.142 E0.00976 ; perimeter
G1 X99.258 Y109.104 E0.00369 ; perimeter
G1 X99.396 Y108.973 E0.00643 ; perimeter
G1 X99.618 Y108.833 E0.00889 ; perimeter
G1 X99.292 Y108.468 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.288 Y108.203 E0.01228 ; perimeter
G1 X99.341 Y107.911 E0.01374 ; perimeter
G1 X99.332 Y107.725 E0.00865 ; perimeter
G1 X99.417 Y107.529 E0.00989 ; perimeter
G1 X99.607 Y107.424 E0.01005 ; perimeter
G1 X100.089 Y107.428 E0.02233 ; perimeter
G1 X100.136 Y107.405 E0.00243 ; perimeter
G1 X100.292 Y107.414 E0.00723 ; perimeter
G1 X100.377 Y107.448 E0.00426 ; perimeter
G1 X100.696 Y107.403 E0.01493 ; perimeter
G1 X100.779 Y107.251 E0.00802 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.809 Y107.198 E0.00255 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.909 Y107.014 E0.00970 ; perimeter
G1 X100.710 Y106.585 E0.02189 ; perimeter
G1 X100.590 Y106.417 E0.00955 ; perimeter
G1 X100.474 Y106.147 E0.01362 ; perimeter
G1 X100.460 Y105.956 E0.00889 ; perimeter
G1 X100.551 Y105.744 E0.01065 ; perimeter
G1 X100.603 Y105.672 E0.00414 ; perimeter
G1 X100.783 Y105.548 E0.01013 ; perimeter
G1 X100.978 Y105.311 E0.01421 ; perimeter
G1 X101.137 Y104.999 E0.01623 ; perimeter
G1 X101.324 Y104.736 E0.01496 ; perimeter
G1 X101.500 Y104.609 E0.01004 ; perimeter
G1 X101.599 Y104.570 E0.00494 ; perimeter
G1 X101.726 Y104.592 E0.00597 ; perimeter
G1 X101.827 Y104.675 E0.00605 ; perimeter
G1 X101.956 Y104.888 E0.01154 ; perimeter
G1 X101.990 Y105.065 E0.00833 ; perimeter
G1 X101.998 Y105.783 E0.03326 ; perimeter
G1 X101.934 Y105.974 E0.00935 ; perimeter
G1 X101.589 Y106.448 E0.02715 ; perimeter
G1 X101.247 Y107.043 E0.03180 ; perimeter
G1 X101.000 Y107.271 E0.01556 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.944 Y107.323 E0.00319 ; perimeter (bridge)
G1 X100.954 Y107.446 E0.00515 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.960 Y107.517 E0.00333 ; perimeter
G1 X100.704 Y107.991 E0.02496 ; perimeter
G1 X100.630 Y108.081 E0.00538 ; perimeter
G1 X100.461 Y108.222 E0.01022 ; perimeter
G1 X100.257 Y108.493 E0.01571 ; perimeter
G1 X100.155 Y108.765 E0.01344 ; perimeter
G1 X100.143 Y108.919 E0.00713 ; perimeter
G1 X100.254 Y109.190 E0.01357 ; perimeter
G1 X100.548 Y109.573 E0.02239 ; perimeter
G1 X100.665 Y109.679 E0.00730 ; perimeter
G1 X100.709 Y109.892 E0.01008 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.712 Y109.907 E0.00063 ; perimeter (bridge)
G1 X100.651 Y109.948 E0.00308 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.596 Y109.985 E0.00306 ; perimeter
G1 X100.232 Y109.905 E0.01726 ; perimeter
G1 X100.134 Y109.850 E0.00521 ; perimeter
G1 X99.811 Y109.769 E0.01543 ; perimeter
G1 X99.525 Y109.638 E0.01458 ; perimeter
G1 X99.258 Y109.617 E0.01243 ; perimeter
G1 X98.983 Y109.517 E0.01357 ; perimeter
G1 X98.774 Y109.479 E0.00981 ; perimeter
G1 X98.527 Y109.350 E0.01294 ; perimeter
G1 X98.442 Y109.247 E0.00618 ; perimeter
G1 X98.417 Y109.169 E0.00379 ; perimeter
G1 X98.453 Y109.066 E0.00507 ; perimeter
G1 X98.651 Y108.869 E0.01293 ; perimeter
G1 X98.914 Y108.767 E0.01305 ; perimeter
G1 X99.097 Y108.591 E0.01179 ; perimeter
G1 X99.241 Y108.500 E0.00788 ; perimeter
G1 X99.550 Y108.407 F10800.000 ; move inwards before travel
G1 X98.907 Y109.028 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.145181
G1 F2400.000
G1 X98.750 Y109.195 E0.00195 ; infill
G1 X100.129 Y109.462 F10800.000 ; move to first infill point
;WIDTH:0.124468
G1 F2400.000
G1 X100.194 Y109.574 E0.00088 ; infill
G1 X100.251 Y109.612 E0.00047 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.194 Y109.574 E-0.01818 ; wipe and retract
G1 X100.129 Y109.462 E-0.03420 ; wipe and retract
;WIPE_END
G1 E-2.34763 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X101.872 Y103.287 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.763 Y103.226 E0.00579 ; perimeter
G1 X101.626 Y103.011 E0.01180 ; perimeter
G1 X101.609 Y102.870 E0.00660 ; perimeter
G1 X101.639 Y102.679 E0.00892 ; perimeter
G1 X101.730 Y102.556 E0.00710 ; perimeter
G1 X101.938 Y102.458 E0.01065 ; perimeter
G1 X102.093 Y102.429 E0.00732 ; perimeter
G1 X102.259 Y102.453 E0.00775 ; perimeter
G1 X102.348 Y102.444 E0.00416 ; perimeter
G1 X102.376 Y102.460 E0.00149 ; perimeter
G1 X102.387 Y102.522 E0.00292 ; perimeter
G1 X102.454 Y102.618 E0.00540 ; perimeter
G1 X102.450 Y102.736 E0.00546 ; perimeter
G1 X102.475 Y102.825 E0.00429 ; perimeter
G1 X102.437 Y102.991 E0.00790 ; perimeter
G1 X102.371 Y103.098 E0.00580 ; perimeter
G1 X102.215 Y103.237 E0.00971 ; perimeter
G1 X102.078 Y103.280 E0.00661 ; perimeter
G1 X101.932 Y103.285 E0.00680 ; perimeter
G1 X101.843 Y103.165 F10800.000 ; move inwards before travel
G1 X102.060 Y102.835 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.348118
G1 F2400.000
G1 X102.010 Y102.875 E0.00163 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.060 Y102.835 E-0.01690 ; wipe and retract
;WIPE_END
G1 E-2.38310 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X103.115 Y99.271 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.961 Y99.052 E0.00906 ; perimeter
G1 X103.156 Y99.013 E0.00673 ; perimeter
G1 X103.124 Y99.212 E0.00683 ; perimeter
G1 X102.690 Y99.508 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.515 Y99.270 E0.01368 ; perimeter
G1 X102.431 Y99.044 E0.01114 ; perimeter
G1 X102.160 Y98.787 E0.01730 ; perimeter
G1 X102.151 Y98.684 E0.00477 ; perimeter
G1 X102.343 Y98.677 E0.00888 ; perimeter
G1 X102.556 Y98.588 E0.01071 ; perimeter
G1 X102.796 Y98.593 E0.01114 ; perimeter
G1 X103.530 Y98.446 E0.03468 ; perimeter
G1 X103.634 Y98.461 E0.00488 ; perimeter
G1 X103.678 Y98.493 E0.00249 ; perimeter
G1 X103.698 Y98.546 E0.00262 ; perimeter
G1 X103.691 Y98.720 E0.00806 ; perimeter
G1 X103.573 Y99.459 E0.03469 ; perimeter
G1 X103.516 Y99.641 E0.00882 ; perimeter
G1 X103.436 Y100.116 E0.02233 ; perimeter
G1 X103.368 Y100.288 E0.00853 ; perimeter
G1 X103.204 Y100.492 E0.01212 ; perimeter
G1 X103.070 Y100.535 E0.00656 ; perimeter
G1 X102.908 Y100.338 E0.01179 ; perimeter
G1 X102.808 Y99.967 E0.01780 ; perimeter
G1 X102.705 Y99.748 E0.01121 ; perimeter
G1 X102.694 Y99.567 E0.00838 ; perimeter
G1 X102.842 Y99.254 F10800.000 ; move inwards before travel
G1 X102.933 Y99.529 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.230405
G1 F2400.000
G1 X103.120 Y99.844 E0.00570 ; infill
;WIDTH:0.239514
G1 X103.207 Y100.023 E0.00325 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.120 Y99.844 E-0.05250 ; wipe and retract
;WIPE_END
G1 E-2.34750 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X106.140 Y99.553 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.104 Y99.408 E0.00694 ; perimeter
G1 X106.108 Y99.241 E0.00773 ; perimeter
G1 X106.158 Y99.108 E0.00661 ; perimeter
G1 X106.223 Y99.061 E0.00369 ; perimeter
G1 X106.315 Y98.941 E0.00703 ; perimeter
G1 X106.461 Y98.870 E0.00753 ; perimeter
G1 X106.667 Y98.869 E0.00955 ; perimeter
G1 X106.918 Y98.932 E0.01197 ; perimeter
G1 X107.443 Y99.144 E0.02623 ; perimeter
G1 X107.500 Y99.204 E0.00385 ; perimeter
G1 X107.699 Y99.290 E0.01005 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.047 Y99.439 E0.01580 ; perimeter (bridge)
G1 X108.187 Y99.474 E0.00603 ; perimeter (bridge)
G1 X107.755 Y99.516 E0.01812 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.588 Y99.532 E0.00779 ; perimeter
G1 X107.437 Y99.584 E0.00739 ; perimeter
G1 X107.311 Y99.565 E0.00589 ; perimeter
G1 X106.747 Y99.786 E0.02808 ; perimeter
G1 X106.478 Y99.783 E0.01248 ; perimeter
G1 X106.339 Y99.743 E0.00667 ; perimeter
G1 X106.221 Y99.671 E0.00639 ; perimeter
G1 X106.174 Y99.603 E0.00385 ; perimeter
G1 X106.226 Y99.431 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.104 Y99.408 E-0.05466 ; wipe and retract
G1 X106.108 Y99.241 E-0.04401 ; wipe and retract
G1 X106.158 Y99.108 E-0.03766 ; wipe and retract
G1 X106.223 Y99.061 E-0.02102 ; wipe and retract
G1 X106.315 Y98.941 E-0.04005 ; wipe and retract
G1 X106.461 Y98.870 E-0.04287 ; wipe and retract
G1 X106.667 Y98.869 E-0.05441 ; wipe and retract
G1 X106.918 Y98.932 E-0.06822 ; wipe and retract
G1 X107.443 Y99.144 E-0.14945 ; wipe and retract
G1 X107.500 Y99.204 E-0.02192 ; wipe and retract
G1 X107.699 Y99.290 E-0.05724 ; wipe and retract
;WIPE_END
G1 E-1.80848 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X109.828 Y99.598 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.159 Y99.780 E0.01750 ; perimeter
G1 X110.385 Y100.014 E0.01506 ; perimeter
G1 X110.421 Y100.093 E0.00405 ; perimeter
G1 X110.675 Y100.383 E0.01786 ; perimeter
G1 X110.771 Y100.609 E0.01136 ; perimeter
G1 X110.757 Y100.738 E0.00601 ; perimeter
G1 X110.641 Y100.845 E0.00734 ; perimeter
G1 X110.458 Y100.851 E0.00846 ; perimeter
G1 X110.299 Y100.832 E0.00745 ; perimeter
G1 X109.800 Y100.645 E0.02465 ; perimeter
G1 X109.496 Y100.466 E0.01638 ; perimeter
G1 X109.216 Y100.271 E0.01579 ; perimeter
G1 X108.960 Y100.036 E0.01607 ; perimeter
G1 X108.757 Y99.802 E0.01439 ; perimeter
G1 X108.626 Y99.724 E0.00705 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.208 Y99.479 E0.02025 ; perimeter (bridge)
G1 X108.637 Y99.584 E0.01845 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.760 Y99.615 E0.00586 ; perimeter
G1 X109.037 Y99.567 E0.01306 ; perimeter
G1 X109.405 Y99.558 E0.01703 ; perimeter
G1 X109.768 Y99.592 E0.01691 ; perimeter
G1 X109.894 Y99.970 F10800.000 ; move inwards before travel
G1 X110.425 Y100.605 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.395108
G1 F2400.000
G1 X109.844 Y100.134 E0.02191 ; infill
G1 X109.316 Y99.811 E0.01813 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.844 Y100.134 E-0.16333 ; wipe and retract
G1 X110.425 Y100.605 E-0.19743 ; wipe and retract
;WIPE_END
G1 E-2.03924 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X113.042 Y101.504 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.058 Y101.485 E0.00083 ; perimeter
G1 X113.104 Y101.547 E0.00260 ; perimeter
G1 X113.090 Y101.539 E0.00052 ; perimeter
G1 X112.531 Y101.230 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.722 Y101.136 E0.00986 ; perimeter
G1 X112.819 Y101.021 E0.00696 ; perimeter
G1 X113.005 Y100.964 E0.00899 ; perimeter
G1 X113.264 Y101.009 E0.01219 ; perimeter
G1 X113.421 Y101.120 E0.00889 ; perimeter
G1 X113.475 Y101.239 E0.00608 ; perimeter
G1 X113.587 Y101.363 E0.00775 ; perimeter
G1 X113.624 Y101.539 E0.00832 ; perimeter
G1 X113.695 Y101.633 E0.00545 ; perimeter
G1 X113.738 Y101.850 E0.01026 ; perimeter
G1 X113.706 Y102.022 E0.00811 ; perimeter
G1 X113.653 Y102.133 E0.00568 ; perimeter
G1 X113.559 Y102.166 E0.00461 ; perimeter
G1 X113.281 Y102.164 E0.01287 ; perimeter
G1 X112.990 Y102.041 E0.01467 ; perimeter
G1 X112.753 Y101.898 E0.01281 ; perimeter
G1 X112.526 Y101.665 E0.01506 ; perimeter
G1 X112.464 Y101.326 E0.01595 ; perimeter
G1 X112.497 Y101.280 E0.00263 ; perimeter
G1 X112.739 Y101.277 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.722 Y101.136 E-0.07049 ; wipe and retract
G1 X112.819 Y101.021 E-0.03963 ; wipe and retract
G1 X113.005 Y100.964 E-0.05124 ; wipe and retract
G1 X113.264 Y101.009 E-0.06947 ; wipe and retract
G1 X113.421 Y101.120 E-0.05066 ; wipe and retract
G1 X113.475 Y101.239 E-0.03463 ; wipe and retract
G1 X113.587 Y101.363 E-0.04412 ; wipe and retract
G1 X113.624 Y101.539 E-0.04738 ; wipe and retract
G1 X113.695 Y101.633 E-0.03104 ; wipe and retract
G1 X113.738 Y101.850 E-0.05844 ; wipe and retract
G1 X113.706 Y102.022 E-0.04622 ; wipe and retract
G1 X113.653 Y102.133 E-0.03236 ; wipe and retract
G1 X113.559 Y102.166 E-0.02625 ; wipe and retract
G1 X113.281 Y102.164 E-0.07335 ; wipe and retract
G1 X112.990 Y102.041 E-0.08359 ; wipe and retract
G1 X112.753 Y101.898 E-0.07300 ; wipe and retract
G1 X112.526 Y101.665 E-0.08578 ; wipe and retract
G1 X112.464 Y101.326 E-0.09085 ; wipe and retract
G1 X112.497 Y101.280 E-0.01500 ; wipe and retract
;WIPE_END
G1 E-1.37649 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X114.885 Y103.248 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.004 Y103.152 E0.00704 ; perimeter
G1 X115.230 Y103.115 E0.01062 ; perimeter
G1 X115.403 Y103.147 E0.00817 ; perimeter
G1 X115.482 Y103.196 E0.00428 ; perimeter
G1 X115.616 Y103.339 E0.00909 ; perimeter
G1 X115.757 Y103.772 E0.02108 ; perimeter
G1 X115.860 Y104.250 E0.02268 ; perimeter
G1 X115.863 Y104.494 E0.01129 ; perimeter
G1 X115.791 Y104.760 E0.01276 ; perimeter
G1 X115.664 Y104.907 E0.00899 ; perimeter
G1 X115.562 Y104.938 E0.00498 ; perimeter
G1 X115.380 Y104.922 E0.00844 ; perimeter
G1 X115.291 Y104.859 E0.00503 ; perimeter
G1 X115.118 Y104.508 E0.01813 ; perimeter
G1 X114.826 Y103.527 E0.04742 ; perimeter
G1 X114.830 Y103.389 E0.00639 ; perimeter
G1 X114.863 Y103.303 E0.00426 ; perimeter
G1 X115.036 Y103.269 F10800.000 ; move inwards before travel
G1 X115.527 Y104.693 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.349667
G1 F2400.000
G1 X115.467 Y104.295 E0.01027 ; infill
G1 X115.360 Y103.879 E0.01096 ; infill
G1 X115.246 Y103.531 E0.00932 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.360 Y103.879 E-0.09645 ; wipe and retract
G1 X115.467 Y104.295 E-0.11334 ; wipe and retract
G1 X115.527 Y104.693 E-0.10626 ; wipe and retract
;WIPE_END
G1 E-2.08395 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X115.518 Y107.003 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.639 Y107.043 E0.00589 ; perimeter
G1 X115.790 Y107.196 E0.00994 ; perimeter
G1 X115.882 Y107.419 E0.01119 ; perimeter
G1 X115.907 Y107.726 E0.01428 ; perimeter
G1 X115.876 Y107.921 E0.00915 ; perimeter
G1 X115.796 Y108.107 E0.00937 ; perimeter
G1 X115.633 Y108.257 E0.01029 ; perimeter
G1 X115.518 Y108.288 E0.00552 ; perimeter
G1 X115.405 Y108.263 E0.00538 ; perimeter
G1 X115.294 Y108.181 E0.00638 ; perimeter
G1 X115.182 Y107.983 E0.01056 ; perimeter
G1 X115.114 Y107.666 E0.01498 ; perimeter
G1 X115.182 Y107.294 E0.01752 ; perimeter
G1 X115.256 Y107.161 E0.00707 ; perimeter
G1 X115.460 Y107.016 E0.01160 ; perimeter
G1 X115.585 Y107.112 F10800.000 ; move inwards before travel
G1 X115.541 Y107.279 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.225738
G1 F2400.000
G1 X115.510 Y107.388 E0.00172 ; infill
;WIDTH:0.261888
G1 X115.508 Y107.430 E0.00076 ; infill
;WIDTH:0.293631
G1 X115.521 Y107.819 E0.00812 ; infill
G1 X115.501 Y108.034 E0.00451 ; infill
G1 X115.511 Y108.042 F10800.000 ; move to first infill point
;WIDTH:0.201365
G1 F2400.000
G1 X115.585 Y107.332 E0.00940 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.511 Y108.042 E-0.18837 ; wipe and retract
;WIPE_END
G1 E-2.21163 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X115.289 Y110.680 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.210 Y110.565 E0.00648 ; perimeter
G1 X115.162 Y110.400 E0.00792 ; perimeter
G1 X115.186 Y110.106 E0.01366 ; perimeter
G1 X115.241 Y109.983 E0.00626 ; perimeter
G1 X115.282 Y109.933 E0.00302 ; perimeter
G1 X115.465 Y109.858 E0.00914 ; perimeter
G1 X115.689 Y109.899 E0.01055 ; perimeter
G1 X115.771 Y109.953 E0.00454 ; perimeter
G1 X115.834 Y110.057 E0.00567 ; perimeter
G1 X115.877 Y110.243 E0.00882 ; perimeter
G1 X115.850 Y110.491 E0.01155 ; perimeter
G1 X115.788 Y110.623 E0.00676 ; perimeter
G1 X115.693 Y110.706 E0.00585 ; perimeter
G1 X115.560 Y110.750 E0.00648 ; perimeter
G1 X115.412 Y110.739 E0.00690 ; perimeter
G1 X115.343 Y110.706 E0.00352 ; perimeter
G1 X115.318 Y110.543 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.210 Y110.565 E-0.05128 ; wipe and retract
G1 X115.162 Y110.400 E-0.04515 ; wipe and retract
G1 X115.186 Y110.106 E-0.07782 ; wipe and retract
G1 X115.241 Y109.983 E-0.03565 ; wipe and retract
G1 X115.282 Y109.933 E-0.01721 ; wipe and retract
G1 X115.465 Y109.858 E-0.05206 ; wipe and retract
G1 X115.689 Y109.899 E-0.06008 ; wipe and retract
G1 X115.771 Y109.953 E-0.02587 ; wipe and retract
G1 X115.834 Y110.057 E-0.03228 ; wipe and retract
G1 X115.877 Y110.243 E-0.05027 ; wipe and retract
G1 X115.850 Y110.491 E-0.06578 ; wipe and retract
G1 X115.788 Y110.623 E-0.03853 ; wipe and retract
G1 X115.693 Y110.706 E-0.03332 ; wipe and retract
G1 X115.560 Y110.750 E-0.03689 ; wipe and retract
G1 X115.412 Y110.739 E-0.03932 ; wipe and retract
G1 X115.343 Y110.706 E-0.02007 ; wipe and retract
;WIPE_END
G1 E-1.71842 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X115.340 Y114.954 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.411 Y115.005 E0.00404 ; perimeter
G1 X115.475 Y115.097 E0.00518 ; perimeter
G1 X115.532 Y115.300 E0.00979 ; perimeter
G1 X115.511 Y115.396 E0.00453 ; perimeter
G1 X115.381 Y115.600 E0.01120 ; perimeter
G1 X115.208 Y115.751 E0.01067 ; perimeter
G1 X115.123 Y115.784 E0.00420 ; perimeter
G1 X115.022 Y115.801 E0.00476 ; perimeter
G1 X114.824 Y115.760 E0.00939 ; perimeter
G1 X114.675 Y115.645 E0.00871 ; perimeter
G1 X114.588 Y115.467 E0.00916 ; perimeter
G1 X114.575 Y115.394 E0.00344 ; perimeter
G1 X114.609 Y115.230 E0.00775 ; perimeter
G1 X114.668 Y115.121 E0.00572 ; perimeter
G1 X114.810 Y114.992 E0.00891 ; perimeter
G1 X114.964 Y114.919 E0.00790 ; perimeter
G1 X115.050 Y114.904 E0.00403 ; perimeter
G1 X115.222 Y114.913 E0.00796 ; perimeter
G1 X115.283 Y114.934 E0.00302 ; perimeter
G1 X115.344 Y115.041 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.411 Y115.005 E-0.03847 ; wipe and retract
G1 X115.475 Y115.097 E-0.02951 ; wipe and retract
G1 X115.532 Y115.300 E-0.05577 ; wipe and retract
G1 X115.511 Y115.396 E-0.02578 ; wipe and retract
G1 X115.381 Y115.600 E-0.06381 ; wipe and retract
G1 X115.208 Y115.751 E-0.06079 ; wipe and retract
G1 X115.123 Y115.784 E-0.02393 ; wipe and retract
G1 X115.022 Y115.801 E-0.02709 ; wipe and retract
G1 X114.824 Y115.760 E-0.05347 ; wipe and retract
G1 X114.675 Y115.645 E-0.04964 ; wipe and retract
G1 X114.588 Y115.467 E-0.05221 ; wipe and retract
G1 X114.575 Y115.394 E-0.01959 ; wipe and retract
G1 X114.609 Y115.230 E-0.04413 ; wipe and retract
G1 X114.668 Y115.121 E-0.03260 ; wipe and retract
G1 X114.810 Y114.992 E-0.05075 ; wipe and retract
G1 X114.964 Y114.919 E-0.04503 ; wipe and retract
G1 X115.050 Y114.904 E-0.02295 ; wipe and retract
G1 X115.222 Y114.913 E-0.04535 ; wipe and retract
G1 X115.283 Y114.934 E-0.01723 ; wipe and retract
;WIPE_END
G1 E-1.64189 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X109.252 Y115.739 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.492 Y115.578 E0.01340 ; perimeter
G1 X110.265 Y115.407 E0.03668 ; perimeter
G1 X110.841 Y115.371 E0.02670 ; perimeter
G1 X111.189 Y115.408 E0.01624 ; perimeter
G1 X111.570 Y115.420 E0.01764 ; perimeter
G1 X112.132 Y115.561 E0.02684 ; perimeter
G1 X112.280 Y115.678 E0.00873 ; perimeter
G1 X112.321 Y115.737 E0.00333 ; perimeter
G1 X112.274 Y115.864 E0.00623 ; perimeter
G1 X112.107 Y115.970 E0.00919 ; perimeter
G1 X111.863 Y116.061 E0.01204 ; perimeter
G1 X111.376 Y116.136 E0.02285 ; perimeter
G1 X110.658 Y116.158 E0.03325 ; perimeter
G1 X110.170 Y116.117 E0.02268 ; perimeter
G1 X110.006 Y116.067 E0.00795 ; perimeter
G1 X109.600 Y116.004 E0.01904 ; perimeter
G1 X109.383 Y115.906 E0.01104 ; perimeter
G1 X109.249 Y115.794 E0.00810 ; perimeter
G1 X109.537 Y115.688 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.492 Y115.578 E-0.08585 ; wipe and retract
G1 X110.265 Y115.407 E-0.20896 ; wipe and retract
G1 X110.841 Y115.371 E-0.15213 ; wipe and retract
G1 X111.189 Y115.408 E-0.09251 ; wipe and retract
G1 X111.570 Y115.420 E-0.10048 ; wipe and retract
G1 X112.132 Y115.561 E-0.15292 ; wipe and retract
G1 X112.280 Y115.678 E-0.04976 ; wipe and retract
G1 X112.321 Y115.737 E-0.01899 ; wipe and retract
G1 X112.274 Y115.864 E-0.03549 ; wipe and retract
G1 X112.107 Y115.970 E-0.05237 ; wipe and retract
G1 X111.863 Y116.061 E-0.06859 ; wipe and retract
G1 X111.376 Y116.136 E-0.13016 ; wipe and retract
G1 X110.658 Y116.158 E-0.18940 ; wipe and retract
G1 X110.170 Y116.117 E-0.12921 ; wipe and retract
G1 X110.006 Y116.067 E-0.04529 ; wipe and retract
G1 X109.600 Y116.004 E-0.10848 ; wipe and retract
G1 X109.383 Y115.906 E-0.06289 ; wipe and retract
G1 X109.249 Y115.794 E-0.04614 ; wipe and retract
;WIPE_END
G1 E-0.67039 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X111.866 Y115.743 ; move to first infill point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.284151
G1 F2400.000
G1 X111.343 Y115.775 E0.01052 ; infill
G1 X110.316 Y115.766 E0.02059 ; infill
G1 X109.844 Y115.798 E0.00948 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.316 Y115.766 E-0.12474 ; wipe and retract
G1 X111.343 Y115.775 E-0.27095 ; wipe and retract
G1 X111.866 Y115.743 E-0.13836 ; wipe and retract
;WIPE_END
G1 E-1.86595 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 X106.770 Y115.525 ; move to first perimeter point
G1 Z8.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.755 Y115.594 E0.00329 ; perimeter
G1 X106.698 Y115.647 E0.00359 ; perimeter
G1 X106.336 Y115.757 E0.01752 ; perimeter
G1 X106.102 Y115.772 E0.01086 ; perimeter
G1 X105.808 Y115.744 E0.01366 ; perimeter
G1 X105.389 Y115.632 E0.02009 ; perimeter
G1 X105.098 Y115.523 E0.01439 ; perimeter
G1 X104.972 Y115.433 E0.00718 ; perimeter
G1 X104.847 Y115.297 E0.00856 ; perimeter
G1 X104.777 Y115.249 E0.00392 ; perimeter
G1 X104.761 Y115.210 E0.00197 ; perimeter
G1 X104.807 Y115.052 E0.00762 ; perimeter
G1 X105.058 Y114.930 E0.01295 ; perimeter
G1 X105.396 Y114.900 E0.01571 ; perimeter
G1 X106.009 Y115.000 E0.02874 ; perimeter
G1 X106.344 Y115.131 E0.01669 ; perimeter
G1 X106.536 Y115.242 E0.01027 ; perimeter
G1 X106.722 Y115.414 E0.01172 ; perimeter
G1 X106.748 Y115.469 E0.00282 ; perimeter
G1 X106.711 Y115.566 F10800.000 ; move inwards before travel
G1 X106.420 Y115.487 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310205
G1 F2400.000
G1 X105.574 Y115.302 E0.01924 ; infill
;WIDTH:0.29409
G1 X105.099 Y115.178 E0.01025 ; infill
;LAYER_CHANGE
;Z:8.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;8.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.574 Y115.302 E-0.12947 ; wipe and retract
;WIPE_END
G1 E-2.27053 F2400.000 ; retract
G1 Z8.675 F10800.000 ; lift Z
G1 Z8.800 ; move to next layer (43)
;AFTER_LAYER_CHANGE
;8.8
G1 Z8.875 ; lift Z
G1 X101.178 Y106.490 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.069 Y106.259 E0.00865 ; perimeter
G1 X101.054 Y106.145 E0.00388 ; perimeter
G1 X101.125 Y106.003 E0.00539 ; perimeter
G1 X101.181 Y105.964 E0.00229 ; perimeter
G1 X101.557 Y105.466 E0.02112 ; perimeter
G1 X101.584 Y105.689 E0.00760 ; perimeter
G1 X101.575 Y105.860 E0.00578 ; perimeter
G1 X101.553 Y105.920 E0.00216 ; perimeter
G1 X101.287 Y106.268 E0.01483 ; perimeter
G1 X101.205 Y106.436 E0.00634 ; perimeter
G1 X100.159 Y107.946 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.891 Y108.221 E0.01299 ; perimeter
G1 X99.938 Y107.944 E0.00950 ; perimeter
G1 X100.099 Y107.946 E0.00544 ; perimeter
G1 X99.743 Y108.716 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.718 Y109.060 E0.01168 ; perimeter
G1 X99.846 Y109.292 E0.00898 ; perimeter
G1 X99.379 Y109.100 E0.01709 ; perimeter
G1 X99.702 Y108.760 E0.01588 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.718 Y109.060 E-0.07945 ; wipe and retract
G1 X99.846 Y109.292 E-0.07003 ; wipe and retract
G1 X99.379 Y109.100 E-0.13327 ; wipe and retract
G1 X99.702 Y108.760 E-0.12382 ; wipe and retract
;WIPE_END
G1 E-1.99342 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X98.365 Y111.597 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X97.975 Y111.908 E0.01689 ; perimeter
G1 X97.886 Y111.599 E0.01089 ; perimeter
G1 X98.305 Y111.597 E0.01418 ; perimeter
G1 X97.726 Y113.310 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X97.855 Y113.677 E0.01316 ; perimeter
G1 X97.915 Y113.775 E0.00388 ; perimeter
G1 X97.877 Y113.757 E0.00141 ; perimeter
G1 X97.552 Y113.729 E0.01104 ; perimeter
G1 X97.487 Y113.706 E0.00233 ; perimeter
G1 X97.524 Y113.631 E0.00282 ; perimeter
G1 X97.617 Y113.544 E0.00432 ; perimeter
G1 X97.701 Y113.365 E0.00669 ; perimeter
G1 X99.050 Y114.554 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.236 Y114.567 E0.00631 ; perimeter
G1 X99.099 Y114.588 E0.00469 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.236 Y114.567 E-0.03659 ; wipe and retract
G1 X99.099 Y114.588 E-0.03659 ; wipe and retract
;WIPE_END
G1 E-2.32681 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X101.444 Y113.942 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.682 Y113.771 E0.00991 ; perimeter
G1 X101.863 Y113.967 E0.00903 ; perimeter
G1 X101.650 Y113.920 E0.00738 ; perimeter
G1 X101.504 Y113.935 E0.00497 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.682 Y113.771 E-0.06397 ; wipe and retract
G1 X101.863 Y113.967 E-0.07039 ; wipe and retract
G1 X101.650 Y113.920 E-0.05756 ; wipe and retract
G1 X101.504 Y113.935 E-0.03875 ; wipe and retract
;WIPE_END
G1 E-2.16933 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X100.513 Y107.374 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X100.717 Y107.079 E0.01664 ; perimeter
G1 X100.753 Y106.718 E0.01678 ; perimeter
G1 X100.607 Y106.409 E0.01586 ; perimeter
G1 X100.567 Y106.198 E0.00994 ; perimeter
G1 X100.578 Y106.036 E0.00749 ; perimeter
G1 X100.668 Y105.811 E0.01124 ; perimeter
G1 X101.086 Y105.290 E0.03094 ; perimeter
G1 X101.081 Y105.192 E0.00453 ; perimeter
G1 X101.204 Y104.904 E0.01450 ; perimeter
G1 X101.392 Y104.652 E0.01456 ; perimeter
G1 X101.639 Y104.511 E0.01319 ; perimeter
G1 X101.716 Y104.501 E0.00361 ; perimeter
G1 X101.834 Y104.624 E0.00790 ; perimeter
G1 X101.971 Y104.841 E0.01189 ; perimeter
G1 X102.028 Y105.120 E0.01319 ; perimeter
G1 X102.041 Y105.519 E0.01847 ; perimeter
G1 X102.071 Y105.663 E0.00683 ; perimeter
G1 X102.058 Y105.798 E0.00629 ; perimeter
G1 X102.080 Y105.878 E0.00384 ; perimeter
G1 X102.043 Y105.982 E0.00512 ; perimeter
G1 X102.048 Y106.039 E0.00263 ; perimeter
G1 X101.996 Y106.135 E0.00510 ; perimeter
G1 X101.699 Y106.523 E0.02262 ; perimeter
G1 X101.538 Y106.850 E0.01686 ; perimeter
G1 X101.496 Y107.005 E0.00745 ; perimeter
G1 X101.363 Y107.228 E0.01203 ; perimeter
G1 X101.310 Y107.377 E0.00731 ; perimeter
G1 X101.042 Y107.822 E0.02405 ; perimeter
G1 X100.886 Y107.992 E0.01069 ; perimeter
G1 X100.687 Y108.148 E0.01171 ; perimeter
G1 X100.589 Y108.195 E0.00504 ; perimeter
G1 X100.297 Y108.495 E0.01940 ; perimeter
G1 X100.230 Y108.672 E0.00874 ; perimeter
G1 X100.209 Y108.953 E0.01305 ; perimeter
G1 X100.382 Y109.265 E0.01652 ; perimeter
G1 X100.649 Y109.472 E0.01567 ; perimeter
G1 X100.786 Y109.552 E0.00735 ; perimeter
G1 X100.973 Y109.716 E0.01153 ; perimeter
G1 X101.155 Y109.950 E0.01371 ; perimeter
G1 X101.211 Y110.146 E0.00945 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X101.132 Y110.456 E0.01336 ; perimeter (bridge)
G1 X100.931 Y110.979 E0.02342 ; perimeter (bridge)
G1 X101.183 Y111.529 E0.02528 ; perimeter (bridge)
G1 X100.852 Y111.535 E0.01383 ; perimeter (bridge)
G1 X100.771 Y111.499 E0.00371 ; perimeter (bridge)
G1 X100.726 Y111.503 E0.00191 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X100.238 Y111.553 E0.02269 ; perimeter
G1 X99.851 Y111.635 E0.01832 ; perimeter
G1 X98.657 Y111.980 E0.05758 ; perimeter
G1 X98.312 Y112.256 E0.02049 ; perimeter
G1 X98.190 Y112.718 E0.02210 ; perimeter
G1 X98.185 Y113.161 E0.02055 ; perimeter
G1 X98.293 Y113.470 E0.01515 ; perimeter
G1 X98.396 Y113.639 E0.00918 ; perimeter
G1 X98.627 Y113.833 E0.01396 ; perimeter
G1 X99.051 Y114.072 E0.02257 ; perimeter
G1 X99.259 Y114.070 E0.00961 ; perimeter
G1 X99.449 Y114.127 E0.00920 ; perimeter
G1 X100.081 Y113.963 E0.03027 ; perimeter
G1 X100.308 Y113.876 E0.01124 ; perimeter
G1 X100.802 Y113.736 E0.02379 ; perimeter
G1 X101.246 Y113.501 E0.02329 ; perimeter
G1 X101.633 Y113.196 E0.02282 ; perimeter
G1 X101.699 Y113.100 E0.00541 ; perimeter
G1 X101.994 Y112.942 E0.01550 ; perimeter
G1 X102.034 Y112.827 E0.00563 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X102.091 Y112.665 E0.00716 ; perimeter (bridge)
G1 X102.246 Y112.744 E0.00728 ; perimeter (bridge)
G1 X102.265 Y112.769 E0.00130 ; perimeter (bridge)
G1 X102.246 Y112.835 E0.00285 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X102.193 Y113.025 E0.00917 ; perimeter
G1 X102.168 Y113.587 E0.02606 ; perimeter
G1 X102.404 Y113.843 E0.01611 ; perimeter
G1 X102.453 Y113.939 E0.00501 ; perimeter
G1 X103.106 Y114.365 E0.03608 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X103.358 Y114.545 E0.01297 ; perimeter (bridge)
G1 X103.460 Y114.710 E0.00812 ; perimeter (bridge)
G1 X103.111 Y114.682 E0.01465 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X102.852 Y114.662 E0.01204 ; perimeter
G1 X102.498 Y114.556 E0.01712 ; perimeter
G1 X102.068 Y114.507 E0.02001 ; perimeter
G1 X101.622 Y114.408 E0.02119 ; perimeter
G1 X101.093 Y114.463 E0.02465 ; perimeter
G1 X99.710 Y114.896 E0.06709 ; perimeter
G1 X99.440 Y115.023 E0.01384 ; perimeter
G1 X99.061 Y115.081 E0.01776 ; perimeter
G1 X98.893 Y115.037 E0.00807 ; perimeter
G1 X98.619 Y114.836 E0.01571 ; perimeter
G1 X98.273 Y114.507 E0.02210 ; perimeter
G1 X98.037 Y114.371 E0.01262 ; perimeter
G1 X97.747 Y114.230 E0.01497 ; perimeter
G1 X97.448 Y114.204 E0.01389 ; perimeter
G1 X97.274 Y114.141 E0.00860 ; perimeter
G1 X96.936 Y114.077 E0.01590 ; perimeter
G1 X96.872 Y114.000 E0.00465 ; perimeter
G1 X96.866 Y113.881 E0.00554 ; perimeter
G1 X96.905 Y113.749 E0.00635 ; perimeter
G1 X96.982 Y113.640 E0.00618 ; perimeter
G1 X97.131 Y113.339 E0.01556 ; perimeter
G1 X97.220 Y113.256 E0.00563 ; perimeter
G1 X97.318 Y113.045 E0.01076 ; perimeter
G1 X97.464 Y112.532 E0.02472 ; perimeter
G1 X97.507 Y112.026 E0.02352 ; perimeter
G1 X97.361 Y111.519 E0.02444 ; perimeter
G1 X97.354 Y111.335 E0.00856 ; perimeter
G1 X97.422 Y111.205 E0.00678 ; perimeter
G1 X97.537 Y111.142 E0.00608 ; perimeter
G1 X97.776 Y111.118 E0.01115 ; perimeter
G1 X98.356 Y111.115 E0.02685 ; perimeter
G1 X99.656 Y111.010 E0.06044 ; perimeter
G1 X99.810 Y110.954 E0.00760 ; perimeter
G1 X100.126 Y110.905 E0.01481 ; perimeter
G1 X100.532 Y110.722 E0.02064 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X100.636 Y110.675 E0.00475 ; perimeter (bridge)
G1 X100.502 Y110.476 E0.00999 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X100.427 Y110.364 E0.00625 ; perimeter
G1 X100.424 Y110.159 E0.00950 ; perimeter
G1 X100.085 Y109.977 E0.01779 ; perimeter
G1 X100.010 Y109.903 E0.00490 ; perimeter
G1 X99.496 Y109.660 E0.02634 ; perimeter
G1 X99.140 Y109.529 E0.01759 ; perimeter
G1 X98.846 Y109.372 E0.01543 ; perimeter
G1 X98.744 Y109.251 E0.00730 ; perimeter
G1 X98.718 Y109.173 E0.00385 ; perimeter
G1 X98.750 Y109.037 E0.00645 ; perimeter
G1 X99.362 Y108.418 E0.04033 ; perimeter
G1 X99.454 Y107.943 E0.02242 ; perimeter
G1 X99.451 Y107.882 E0.00282 ; perimeter
G1 X99.512 Y107.700 E0.00889 ; perimeter
G1 X99.575 Y107.581 E0.00624 ; perimeter
G1 X99.789 Y107.461 E0.01135 ; perimeter
G1 X100.068 Y107.463 E0.01294 ; perimeter
G1 X100.261 Y107.366 E0.01000 ; perimeter
G1 X100.453 Y107.372 E0.00889 ; perimeter
G1 X100.852 Y107.493 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.717 Y107.079 E-0.10422 ; wipe and retract
G1 X100.753 Y106.718 E-0.09559 ; wipe and retract
G1 X100.607 Y106.409 E-0.09032 ; wipe and retract
G1 X100.567 Y106.198 E-0.05665 ; wipe and retract
G1 X100.578 Y106.036 E-0.04267 ; wipe and retract
G1 X100.668 Y105.811 E-0.06406 ; wipe and retract
G1 X101.086 Y105.290 E-0.17624 ; wipe and retract
G1 X101.081 Y105.192 E-0.02582 ; wipe and retract
G1 X101.204 Y104.904 E-0.08259 ; wipe and retract
G1 X101.392 Y104.652 E-0.08295 ; wipe and retract
G1 X101.639 Y104.511 E-0.07514 ; wipe and retract
G1 X101.716 Y104.501 E-0.02057 ; wipe and retract
G1 X101.834 Y104.624 E-0.04501 ; wipe and retract
G1 X101.971 Y104.841 E-0.06772 ; wipe and retract
G1 X102.028 Y105.120 E-0.07513 ; wipe and retract
G1 X102.041 Y105.519 E-0.10524 ; wipe and retract
G1 X102.071 Y105.663 E-0.03890 ; wipe and retract
G1 X102.058 Y105.798 E-0.03581 ; wipe and retract
G1 X102.080 Y105.878 E-0.02186 ; wipe and retract
G1 X102.043 Y105.982 E-0.02915 ; wipe and retract
G1 X102.048 Y106.039 E-0.01498 ; wipe and retract
G1 X101.996 Y106.135 E-0.02903 ; wipe and retract
G1 X101.699 Y106.523 E-0.12889 ; wipe and retract
G1 X101.538 Y106.850 E-0.09606 ; wipe and retract
G1 X101.496 Y107.005 E-0.04245 ; wipe and retract
G1 X101.363 Y107.228 E-0.06855 ; wipe and retract
G1 X101.310 Y107.377 E-0.04165 ; wipe and retract
G1 X101.042 Y107.822 E-0.13698 ; wipe and retract
G1 X100.886 Y107.992 E-0.06092 ; wipe and retract
G1 X100.687 Y108.148 E-0.06671 ; wipe and retract
G1 X100.589 Y108.195 E-0.02874 ; wipe and retract
G1 X100.297 Y108.495 E-0.11053 ; wipe and retract
G1 X100.230 Y108.672 E-0.04980 ; wipe and retract
G1 X100.211 Y108.933 E-0.06907 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X106.422 Y115.370 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.455 Y115.504 E0.00642 ; perimeter
G1 X106.366 Y115.597 E0.00596 ; perimeter
G1 X105.981 Y115.696 E0.01840 ; perimeter
G1 X105.558 Y115.683 E0.01963 ; perimeter
G1 X105.087 Y115.574 E0.02236 ; perimeter
G1 X104.901 Y115.505 E0.00919 ; perimeter
G1 X104.700 Y115.401 E0.01051 ; perimeter
G1 X104.463 Y115.235 E0.01337 ; perimeter
G1 X104.434 Y115.170 E0.00332 ; perimeter
G1 X104.301 Y115.020 E0.00928 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.292 Y114.936 E0.00351 ; perimeter (bridge)
G1 X104.336 Y114.917 E0.00197 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.408 Y114.885 E0.00367 ; perimeter
G1 X104.812 Y114.806 E0.01909 ; perimeter
G1 X105.190 Y114.817 E0.01750 ; perimeter
G1 X105.731 Y114.939 E0.02569 ; perimeter
G1 X106.070 Y115.076 E0.01693 ; perimeter
G1 X106.264 Y115.200 E0.01066 ; perimeter
G1 X106.381 Y115.326 E0.00798 ; perimeter
G1 X106.344 Y115.485 F10800.000 ; move inwards before travel
G1 X106.088 Y115.419 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.214157
G1 F2400.000
G1 X105.718 Y115.325 E0.00544 ; infill
;WIDTH:0.322772
G1 X105.143 Y115.193 E0.01373 ; infill
;WIDTH:0.315176
G1 X104.700 Y115.107 E0.01022 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.143 Y115.193 E-0.11909 ; wipe and retract
;WIPE_END
G1 E-2.28091 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X102.450 Y114.308 ; move to first infill point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.274164
G1 F2400.000
G1 X102.164 Y114.159 E0.00619 ; infill
G1 X102.080 Y114.201 E0.00182 ; infill
;WIDTH:0.249452
G1 X101.996 Y114.244 E0.00162 ; infill
G1 X101.214 Y114.012 F10800.000 ; move to first infill point
;WIDTH:0.371446
G1 F2400.000
G1 X101.027 Y114.068 E0.00533 ; infill
;WIDTH:0.35982
G1 X100.998 Y114.079 E0.00082 ; infill
;WIDTH:0.351008
G1 X100.209 Y114.331 E0.02122 ; infill
;WIDTH:0.340278
G1 X99.480 Y114.541 E0.01875 ; infill
G1 X98.833 Y114.444 F10800.000 ; move to first infill point
;WIDTH:0.379623
G1 F2400.000
G1 X98.674 Y114.327 E0.00550 ; infill
;WIDTH:0.353052
G1 X98.516 Y114.210 E0.00507 ; infill
;WIDTH:0.326483
G1 X98.231 Y114.022 E0.00807 ; infill
G1 X97.976 Y114.066 E0.00609 ; infill
G1 X97.840 Y112.565 F10800.000 ; move to first infill point
;WIDTH:0.332364
G1 F2400.000
G1 X97.857 Y112.466 E0.00241 ; infill
G1 X98.599 Y111.538 F10800.000 ; move to first infill point
;WIDTH:0.406056
G1 F2400.000
G1 X98.878 Y111.487 E0.00856 ; infill
;WIDTH:0.310531
G1 X99.436 Y111.385 E0.01262 ; infill
;WIDTH:0.215784
G1 X99.769 Y111.318 E0.00487 ; infill
;WIDTH:0.222926
G1 X100.233 Y111.221 E0.00709 ; infill
;WIDTH:0.260878
G1 X100.394 Y111.177 E0.00303 ; infill
;WIDTH:0.298832
G1 X100.555 Y111.134 E0.00356 ; infill
;WIDTH:0.336785
G1 X100.717 Y111.090 E0.00409 ; infill
G1 X100.926 Y110.289 F10800.000 ; move to first infill point
;WIDTH:0.248861
G1 F2400.000
G1 X100.726 Y109.946 E0.00680 ; infill
;WIDTH:0.232859
G1 X100.127 Y109.542 E0.01141 ; infill
G1 X100.127 Y109.345 E0.00311 ; infill
G1 X100.222 Y107.656 F10800.000 ; move to first infill point
;WIDTH:0.140015
G1 F2400.000
G1 X100.635 Y107.664 E0.00334 ; infill
G1 X100.726 Y107.630 E0.00079 ; infill
;WIDTH:0.249145
G1 X100.765 Y107.614 E0.00071 ; infill
G1 X101.010 Y107.235 E0.00774 ; infill
;WIDTH:0.220496
G1 X101.112 Y106.914 E0.00497 ; infill
G1 X101.329 Y105.312 F10800.000 ; move to first infill point
;WIDTH:0.155988
G1 F2400.000
G1 X101.447 Y105.118 E0.00214 ; infill
;WIDTH:0.176218
G1 X101.614 Y104.879 E0.00322 ; infill
G1 X101.676 Y104.825 E0.00090 ; infill
G1 X101.924 Y103.437 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.892 Y103.475 E0.00228 ; perimeter
G1 X101.836 Y103.476 E0.00263 ; perimeter
G1 X101.751 Y103.412 E0.00489 ; perimeter
G1 X101.599 Y103.144 E0.01429 ; perimeter
G1 X101.544 Y102.816 E0.01538 ; perimeter
G1 X101.579 Y102.699 E0.00569 ; perimeter
G1 X101.712 Y102.533 E0.00983 ; perimeter
G1 X101.838 Y102.479 E0.00636 ; perimeter
G1 X102.070 Y102.502 E0.01081 ; perimeter
G1 X102.173 Y102.490 E0.00478 ; perimeter
G1 X102.274 Y102.559 E0.00565 ; perimeter
G1 X102.346 Y102.584 E0.00357 ; perimeter
G1 X102.378 Y102.632 E0.00269 ; perimeter
G1 X102.423 Y102.844 E0.01002 ; perimeter
G1 X102.396 Y103.030 E0.00872 ; perimeter
G1 X102.322 Y103.135 E0.00595 ; perimeter
G1 X102.036 Y103.412 E0.01845 ; perimeter
G1 X101.982 Y103.424 E0.00254 ; perimeter
G1 X101.876 Y103.425 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.892 Y103.475 E-0.02726 ; wipe and retract
G1 X101.836 Y103.476 E-0.01499 ; wipe and retract
G1 X101.751 Y103.412 E-0.02788 ; wipe and retract
G1 X101.599 Y103.144 E-0.08141 ; wipe and retract
G1 X101.544 Y102.816 E-0.08764 ; wipe and retract
G1 X101.579 Y102.699 E-0.03244 ; wipe and retract
G1 X101.712 Y102.533 E-0.05598 ; wipe and retract
G1 X101.838 Y102.479 E-0.03621 ; wipe and retract
G1 X102.070 Y102.502 E-0.06159 ; wipe and retract
G1 X102.173 Y102.490 E-0.02724 ; wipe and retract
G1 X102.274 Y102.559 E-0.03218 ; wipe and retract
G1 X102.346 Y102.584 E-0.02032 ; wipe and retract
G1 X102.378 Y102.632 E-0.01534 ; wipe and retract
G1 X102.423 Y102.844 E-0.05707 ; wipe and retract
G1 X102.396 Y103.030 E-0.04966 ; wipe and retract
G1 X102.322 Y103.135 E-0.03387 ; wipe and retract
G1 X102.036 Y103.412 E-0.10509 ; wipe and retract
G1 X101.982 Y103.424 E-0.01447 ; wipe and retract
;WIPE_END
G1 E-1.61935 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X103.095 Y99.246 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.002 Y99.059 E0.00707 ; perimeter
G1 X102.885 Y98.993 E0.00455 ; perimeter
G1 X103.190 Y98.891 E0.01088 ; perimeter
G1 X103.115 Y99.190 E0.01043 ; perimeter
G1 X102.793 Y98.515 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.421 Y98.305 E0.03068 ; perimeter
G1 X103.522 Y98.246 E0.00541 ; perimeter
G1 X103.806 Y98.175 E0.01356 ; perimeter
G1 X103.927 Y98.249 E0.00657 ; perimeter
G1 X103.955 Y98.319 E0.00350 ; perimeter
G1 X103.815 Y98.798 E0.02310 ; perimeter
G1 X103.741 Y98.936 E0.00725 ; perimeter
G1 X103.647 Y99.050 E0.00687 ; perimeter
G1 X103.553 Y99.423 E0.01781 ; perimeter
G1 X103.451 Y99.583 E0.00879 ; perimeter
G1 X103.403 Y99.871 E0.01349 ; perimeter
G1 X103.374 Y99.937 E0.00337 ; perimeter
G1 X103.190 Y100.167 E0.01363 ; perimeter
G1 X103.017 Y100.122 E0.00828 ; perimeter
G1 X102.954 Y100.054 E0.00430 ; perimeter
G1 X102.636 Y99.407 E0.03340 ; perimeter
G1 X102.513 Y99.337 E0.00658 ; perimeter
G1 X102.311 Y99.108 E0.01416 ; perimeter
G1 X101.901 Y98.853 E0.02232 ; perimeter
G1 X101.795 Y98.838 E0.00497 ; perimeter
G1 X101.642 Y98.733 E0.00859 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.596 Y98.701 E0.00237 ; perimeter (bridge)
G1 X101.600 Y98.598 E0.00430 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.696 Y98.447 E0.00829 ; perimeter
G1 X101.860 Y98.401 E0.00790 ; perimeter
G1 X102.435 Y98.423 E0.02667 ; perimeter
G1 X102.735 Y98.500 E0.01432 ; perimeter
G1 X103.050 Y98.822 F10800.000 ; move inwards before travel
G1 X102.580 Y98.841 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.250653
G1 F2400.000
G1 X102.140 Y98.653 E0.00826 ; infill
G1 X103.476 Y98.857 F10800.000 ; move to first infill point
;WIDTH:0.153606
G1 F2400.000
G1 X103.600 Y98.480 E0.00366 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.476 Y98.857 E-0.10491 ; wipe and retract
;WIPE_END
G1 E-2.29509 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X106.332 Y98.847 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.452 Y98.777 E0.00645 ; perimeter
G1 X106.651 Y98.784 E0.00921 ; perimeter
G1 X106.867 Y98.828 E0.01021 ; perimeter
G1 X107.114 Y98.904 E0.01199 ; perimeter
G1 X107.472 Y99.055 E0.01796 ; perimeter
G1 X107.927 Y99.161 E0.02165 ; perimeter
G1 X108.682 Y99.395 E0.03663 ; perimeter
G1 X109.035 Y99.483 E0.01686 ; perimeter
G1 X109.157 Y99.485 E0.00566 ; perimeter
G1 X109.348 Y99.566 E0.00959 ; perimeter
G1 X109.652 Y99.592 E0.01411 ; perimeter
G1 X110.296 Y99.954 E0.03421 ; perimeter
G1 X110.452 Y100.105 E0.01007 ; perimeter
G1 X110.608 Y100.189 E0.00820 ; perimeter
G1 X110.869 Y100.458 E0.01739 ; perimeter
G1 X111.025 Y100.702 E0.01340 ; perimeter
G1 X110.996 Y100.975 E0.01271 ; perimeter
G1 X110.941 Y101.015 E0.00317 ; perimeter
G1 X110.577 Y100.994 E0.01687 ; perimeter
G1 X110.182 Y100.867 E0.01921 ; perimeter
G1 X109.737 Y100.597 E0.02414 ; perimeter
G1 X109.515 Y100.500 E0.01122 ; perimeter
G1 X109.260 Y100.336 E0.01406 ; perimeter
G1 X108.977 Y100.191 E0.01470 ; perimeter
G1 X108.791 Y100.048 E0.01089 ; perimeter
G1 X108.467 Y99.921 E0.01610 ; perimeter
G1 X108.399 Y99.874 E0.00385 ; perimeter
G1 X107.903 Y99.736 E0.02385 ; perimeter
G1 X107.418 Y99.661 E0.02272 ; perimeter
G1 X107.241 Y99.715 E0.00857 ; perimeter
G1 X106.670 Y99.742 E0.02651 ; perimeter
G1 X106.378 Y99.664 E0.01398 ; perimeter
G1 X106.253 Y99.569 E0.00727 ; perimeter
G1 X106.183 Y99.479 E0.00529 ; perimeter
G1 X106.155 Y99.390 E0.00432 ; perimeter
G1 X106.154 Y99.189 E0.00929 ; perimeter
G1 X106.203 Y99.017 E0.00829 ; perimeter
G1 X106.296 Y98.895 E0.00710 ; perimeter
G1 X106.463 Y98.893 F10800.000 ; move inwards before travel
G1 X107.369 Y99.350 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.101869
G1 F2400.000
G1 X107.959 Y99.463 E0.00294 ; infill
G1 X108.520 Y99.628 E0.00286 ; infill
;WIDTH:0.13042
G1 X108.607 Y99.670 E0.00070 ; infill
;WIDTH:0.179527
G1 X108.952 Y99.781 E0.00412 ; infill
;WIDTH:0.194807
G1 X108.986 Y99.798 E0.00047 ; infill
;WIDTH:0.204498
G1 X109.003 Y99.805 E0.00025 ; infill
G1 X109.032 Y99.724 F10800.000 ; move to first infill point
;WIDTH:0.359354
G1 F2400.000
G1 X109.949 Y100.238 E0.02768 ; infill
G1 X110.233 Y100.441 E0.00919 ; infill
G1 X110.709 Y100.655 E0.01372 ; infill
G1 X110.230 Y100.226 F10800.000 ; move to first infill point
;WIDTH:0.377465
G1 F2400.000
G1 X109.455 Y99.982 E0.02260 ; infill
;WIDTH:0.370325
G1 X109.367 Y99.956 E0.00251 ; infill
;WIDTH:0.33466
G1 X109.278 Y99.930 E0.00224 ; infill
;WIDTH:0.298996
G1 X109.241 Y99.916 E0.00084 ; infill
;WIDTH:0.289796
G1 X108.817 Y99.677 E0.00999 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.241 Y99.916 E-0.12844 ; wipe and retract
;WIPE_END
G1 E-2.27156 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X113.034 Y101.599 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.069 Y101.595 E0.00118 ; perimeter
G1 X113.102 Y101.632 E0.00169 ; perimeter
G1 X113.088 Y101.625 E0.00052 ; perimeter
G1 X113.224 Y101.125 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.405 Y101.231 E0.00972 ; perimeter
G1 X113.823 Y101.749 E0.03081 ; perimeter
G1 X113.875 Y101.975 E0.01075 ; perimeter
G1 X113.859 Y102.154 E0.00835 ; perimeter
G1 X113.795 Y102.274 E0.00626 ; perimeter
G1 X113.683 Y102.310 E0.00547 ; perimeter
G1 X113.486 Y102.314 E0.00910 ; perimeter
G1 X113.335 Y102.281 E0.00716 ; perimeter
G1 X112.785 Y102.014 E0.02836 ; perimeter
G1 X112.391 Y101.776 E0.02131 ; perimeter
G1 X112.178 Y101.514 E0.01561 ; perimeter
G1 X112.168 Y101.373 E0.00659 ; perimeter
G1 X112.291 Y101.258 E0.00781 ; perimeter
G1 X112.407 Y101.243 E0.00540 ; perimeter
G1 X112.604 Y101.144 E0.01020 ; perimeter
G1 X112.857 Y101.148 E0.01173 ; perimeter
G1 X113.035 Y101.098 E0.00858 ; perimeter
G1 X113.165 Y101.122 E0.00608 ; perimeter
G1 X113.264 Y101.331 F10800.000 ; move inwards before travel
G1 X112.595 Y101.445 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.106501
G1 F2400.000
G1 X112.727 Y101.410 E0.00072 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.595 Y101.445 E-0.03596 ; wipe and retract
;WIPE_END
G1 E-2.36404 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X114.803 Y103.212 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.920 Y103.113 E0.00711 ; perimeter
G1 X115.181 Y103.067 E0.01227 ; perimeter
G1 X115.386 Y103.115 E0.00979 ; perimeter
G1 X115.437 Y103.147 E0.00277 ; perimeter
G1 X115.586 Y103.323 E0.01069 ; perimeter
G1 X115.675 Y103.612 E0.01401 ; perimeter
G1 X115.684 Y103.717 E0.00486 ; perimeter
G1 X115.859 Y104.377 E0.03164 ; perimeter
G1 X115.868 Y104.610 E0.01081 ; perimeter
G1 X115.785 Y104.906 E0.01422 ; perimeter
G1 X115.671 Y105.035 E0.00796 ; perimeter
G1 X115.507 Y105.072 E0.00778 ; perimeter
G1 X115.383 Y105.056 E0.00578 ; perimeter
G1 X115.285 Y104.987 E0.00554 ; perimeter
G1 X115.147 Y104.692 E0.01511 ; perimeter
G1 X115.006 Y104.023 E0.03168 ; perimeter
G1 X114.928 Y103.843 E0.00908 ; perimeter
G1 X114.867 Y103.765 E0.00459 ; perimeter
G1 X114.774 Y103.486 E0.01360 ; perimeter
G1 X114.762 Y103.311 E0.00812 ; perimeter
G1 X114.780 Y103.268 E0.00217 ; perimeter
G1 X114.956 Y103.226 F10800.000 ; move inwards before travel
G1 X115.489 Y104.826 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29901
G1 F2400.000
G1 X115.498 Y104.564 E0.00558 ; infill
G1 X115.481 Y104.436 E0.00276 ; infill
G1 X115.352 Y103.899 E0.01176 ; infill
G1 X115.219 Y103.524 E0.00847 ; infill
G1 X115.037 Y103.337 E0.00555 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.219 Y103.524 E-0.06878 ; wipe and retract
G1 X115.352 Y103.899 E-0.10499 ; wipe and retract
G1 X115.481 Y104.436 E-0.14578 ; wipe and retract
G1 X115.498 Y104.564 E-0.03422 ; wipe and retract
G1 X115.489 Y104.826 E-0.06919 ; wipe and retract
;WIPE_END
G1 E-1.97703 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X115.469 Y106.844 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.553 Y106.833 E0.00392 ; perimeter
G1 X115.641 Y106.862 E0.00430 ; perimeter
G1 X115.787 Y107.007 E0.00953 ; perimeter
G1 X115.882 Y107.226 E0.01105 ; perimeter
G1 X115.908 Y107.511 E0.01327 ; perimeter
G1 X115.878 Y107.730 E0.01023 ; perimeter
G1 X115.805 Y107.906 E0.00883 ; perimeter
G1 X115.666 Y108.054 E0.00938 ; perimeter
G1 X115.503 Y108.103 E0.00792 ; perimeter
G1 X115.416 Y108.084 E0.00410 ; perimeter
G1 X115.271 Y107.968 E0.00860 ; perimeter
G1 X115.179 Y107.797 E0.00899 ; perimeter
G1 X115.113 Y107.484 E0.01486 ; perimeter
G1 X115.162 Y107.181 E0.01421 ; perimeter
G1 X115.235 Y107.011 E0.00857 ; perimeter
G1 X115.420 Y106.879 E0.01053 ; perimeter
G1 X115.534 Y106.898 F10800.000 ; move inwards before travel
G1 X115.524 Y107.101 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.344643
G1 F2400.000
G1 X115.520 Y107.633 E0.01336 ; infill
;WIDTH:0.296053
G1 X115.501 Y107.843 E0.00444 ; infill
G1 X115.522 Y107.846 F10800.000 ; move to first infill point
;WIDTH:0.156865
G1 F2400.000
G1 X115.519 Y107.805 E0.00038 ; infill
;WIDTH:0.182893
G1 X115.515 Y107.765 E0.00047 ; infill
;WIDTH:0.224618
G1 X115.585 Y107.147 E0.00939 ; infill
G1 X115.513 Y107.109 F10800.000 ; move to first infill point
;WIDTH:0.271545
G1 F2400.000
G1 X115.545 Y107.837 E0.01386 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.513 Y107.109 E-0.19238 ; wipe and retract
;WIPE_END
G1 E-2.20762 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X115.434 Y109.938 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.498 Y109.931 E0.00295 ; perimeter
G1 X115.635 Y109.956 E0.00646 ; perimeter
G1 X115.701 Y109.974 E0.00317 ; perimeter
G1 X115.775 Y110.029 E0.00427 ; perimeter
G1 X115.831 Y110.124 E0.00512 ; perimeter
G1 X115.879 Y110.315 E0.00912 ; perimeter
G1 X115.865 Y110.522 E0.00962 ; perimeter
G1 X115.801 Y110.682 E0.00798 ; perimeter
G1 X115.684 Y110.784 E0.00716 ; perimeter
G1 X115.559 Y110.823 E0.00605 ; perimeter
G1 X115.390 Y110.805 E0.00789 ; perimeter
G1 X115.286 Y110.753 E0.00538 ; perimeter
G1 X115.190 Y110.604 E0.00823 ; perimeter
G1 X115.161 Y110.467 E0.00648 ; perimeter
G1 X115.176 Y110.221 E0.01141 ; perimeter
G1 X115.271 Y110.026 E0.01003 ; perimeter
G1 X115.379 Y109.963 E0.00583 ; perimeter
G1 X115.483 Y109.979 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.498 Y109.931 E-0.03227 ; wipe and retract
G1 X115.635 Y109.956 E-0.03678 ; wipe and retract
G1 X115.701 Y109.974 E-0.01804 ; wipe and retract
G1 X115.775 Y110.029 E-0.02433 ; wipe and retract
G1 X115.831 Y110.124 E-0.02919 ; wipe and retract
G1 X115.879 Y110.315 E-0.05196 ; wipe and retract
G1 X115.865 Y110.522 E-0.05480 ; wipe and retract
G1 X115.801 Y110.682 E-0.04544 ; wipe and retract
G1 X115.684 Y110.784 E-0.04080 ; wipe and retract
G1 X115.559 Y110.823 E-0.03446 ; wipe and retract
G1 X115.390 Y110.805 E-0.04494 ; wipe and retract
G1 X115.286 Y110.753 E-0.03063 ; wipe and retract
G1 X115.190 Y110.604 E-0.04690 ; wipe and retract
G1 X115.161 Y110.467 E-0.03691 ; wipe and retract
G1 X115.176 Y110.221 E-0.06502 ; wipe and retract
G1 X115.271 Y110.026 E-0.05716 ; wipe and retract
G1 X115.379 Y109.963 E-0.03323 ; wipe and retract
;WIPE_END
G1 E-1.71715 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X115.354 Y114.946 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.423 Y114.996 E0.00396 ; perimeter
G1 X115.481 Y115.076 E0.00459 ; perimeter
G1 X115.524 Y115.188 E0.00557 ; perimeter
G1 X115.538 Y115.292 E0.00485 ; perimeter
G1 X115.517 Y115.392 E0.00475 ; perimeter
G1 X115.402 Y115.576 E0.01004 ; perimeter
G1 X115.204 Y115.752 E0.01226 ; perimeter
G1 X115.121 Y115.786 E0.00417 ; perimeter
G1 X115.015 Y115.804 E0.00498 ; perimeter
G1 X114.788 Y115.766 E0.01066 ; perimeter
G1 X114.636 Y115.644 E0.00901 ; perimeter
G1 X114.564 Y115.482 E0.00823 ; perimeter
G1 X114.550 Y115.399 E0.00388 ; perimeter
G1 X114.580 Y115.271 E0.00611 ; perimeter
G1 X114.653 Y115.130 E0.00737 ; perimeter
G1 X114.787 Y114.998 E0.00867 ; perimeter
G1 X114.993 Y114.902 E0.01054 ; perimeter
G1 X115.195 Y114.900 E0.00937 ; perimeter
G1 X115.296 Y114.929 E0.00489 ; perimeter
G1 X115.360 Y115.031 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.423 Y114.996 E-0.03785 ; wipe and retract
G1 X115.481 Y115.076 E-0.02613 ; wipe and retract
G1 X115.524 Y115.188 E-0.03175 ; wipe and retract
G1 X115.538 Y115.292 E-0.02765 ; wipe and retract
G1 X115.517 Y115.392 E-0.02707 ; wipe and retract
G1 X115.402 Y115.576 E-0.05722 ; wipe and retract
G1 X115.204 Y115.752 E-0.06985 ; wipe and retract
G1 X115.121 Y115.786 E-0.02375 ; wipe and retract
G1 X115.015 Y115.804 E-0.02840 ; wipe and retract
G1 X114.788 Y115.766 E-0.06071 ; wipe and retract
G1 X114.636 Y115.644 E-0.05132 ; wipe and retract
G1 X114.564 Y115.482 E-0.04688 ; wipe and retract
G1 X114.550 Y115.399 E-0.02212 ; wipe and retract
G1 X114.580 Y115.271 E-0.03483 ; wipe and retract
G1 X114.653 Y115.130 E-0.04199 ; wipe and retract
G1 X114.787 Y114.998 E-0.04937 ; wipe and retract
G1 X114.993 Y114.902 E-0.06004 ; wipe and retract
G1 X115.195 Y114.900 E-0.05337 ; wipe and retract
G1 X115.296 Y114.929 E-0.02786 ; wipe and retract
;WIPE_END
G1 E-1.62186 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 X112.414 Y116.016 ; move to first perimeter point
G1 Z8.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.135 Y116.097 E0.01347 ; perimeter
G1 X111.633 Y116.159 E0.02344 ; perimeter
G1 X111.062 Y116.161 E0.02641 ; perimeter
G1 X110.820 Y116.114 E0.01145 ; perimeter
G1 X110.478 Y116.092 E0.01589 ; perimeter
G1 X110.123 Y116.002 E0.01695 ; perimeter
G1 X109.797 Y115.828 E0.01712 ; perimeter
G1 X109.755 Y115.756 E0.00385 ; perimeter
G1 X110.001 Y115.581 E0.01399 ; perimeter
G1 X110.645 Y115.425 E0.03069 ; perimeter
G1 X111.283 Y115.366 E0.02965 ; perimeter
G1 X111.803 Y115.387 E0.02414 ; perimeter
G1 X112.220 Y115.463 E0.01963 ; perimeter
G1 X112.476 Y115.541 E0.01237 ; perimeter
G1 X112.544 Y115.601 E0.00421 ; perimeter
G1 X112.586 Y115.686 E0.00440 ; perimeter
G1 X112.590 Y115.778 E0.00423 ; perimeter
G1 X112.535 Y115.897 E0.00609 ; perimeter
G1 X112.457 Y115.974 E0.00507 ; perimeter
G1 X112.166 Y115.864 F10800.000 ; move inwards before travel
G1 X112.311 Y115.779 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.269165
G1 F2400.000
G1 X110.702 Y115.764 E0.03028 ; infill
;WIDTH:0.245382
G1 X110.501 Y115.781 E0.00339 ; infill
;WIDTH:0.218971
G1 X110.301 Y115.799 E0.00295 ; infill
;LAYER_CHANGE
;Z:9
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;9
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.501 Y115.781 E-0.05310 ; wipe and retract
;WIPE_END
G1 E-2.34690 F2400.000 ; retract
G1 Z8.875 F10800.000 ; lift Z
G1 Z9.000 ; move to next layer (44)
;AFTER_LAYER_CHANGE
;9
G1 Z9.075 ; lift Z
G1 X102.257 Y102.568 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.326 Y102.681 E0.00615 ; perimeter
G1 X102.379 Y102.889 E0.00991 ; perimeter
G1 X102.358 Y103.070 E0.00845 ; perimeter
G1 X102.299 Y103.154 E0.00478 ; perimeter
G1 X102.261 Y103.263 E0.00534 ; perimeter
G1 X101.865 Y103.794 E0.03070 ; perimeter
G1 X101.683 Y103.573 E0.01325 ; perimeter
G1 X101.592 Y103.401 E0.00902 ; perimeter
G1 X101.527 Y103.140 E0.01246 ; perimeter
G1 X101.471 Y102.752 E0.01816 ; perimeter
G1 X101.547 Y102.589 E0.00835 ; perimeter
G1 X101.592 Y102.536 E0.00322 ; perimeter
G1 X101.753 Y102.487 E0.00780 ; perimeter
G1 X102.078 Y102.500 E0.01507 ; perimeter
G1 X102.201 Y102.546 E0.00608 ; perimeter
G1 X102.229 Y102.697 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.326 Y102.681 E-0.04851 ; wipe and retract
G1 X102.379 Y102.889 E-0.05648 ; wipe and retract
G1 X102.358 Y103.070 E-0.04813 ; wipe and retract
G1 X102.299 Y103.154 E-0.02724 ; wipe and retract
G1 X102.261 Y103.263 E-0.03044 ; wipe and retract
G1 X101.865 Y103.794 E-0.17487 ; wipe and retract
G1 X101.683 Y103.573 E-0.07550 ; wipe and retract
G1 X101.592 Y103.401 E-0.05141 ; wipe and retract
G1 X101.527 Y103.140 E-0.07098 ; wipe and retract
G1 X101.471 Y102.752 E-0.10344 ; wipe and retract
G1 X101.547 Y102.589 E-0.04758 ; wipe and retract
G1 X101.592 Y102.536 E-0.01832 ; wipe and retract
G1 X101.753 Y102.487 E-0.04444 ; wipe and retract
G1 X102.078 Y102.500 E-0.08586 ; wipe and retract
G1 X102.201 Y102.546 E-0.03466 ; wipe and retract
;WIPE_END
G1 E-1.48212 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X101.612 Y105.537 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.678 Y105.983 E0.01526 ; perimeter
G1 X101.385 Y106.356 E0.01607 ; perimeter
G1 X101.281 Y106.567 E0.00798 ; perimeter
G1 X101.116 Y107.194 E0.02192 ; perimeter
G1 X101.025 Y107.386 E0.00721 ; perimeter
G1 X101.188 Y106.815 E0.02010 ; perimeter
G1 X101.204 Y106.508 E0.01042 ; perimeter
G1 X101.163 Y106.292 E0.00743 ; perimeter
G1 X101.171 Y106.244 E0.00164 ; perimeter
G1 X101.243 Y106.089 E0.00580 ; perimeter
G1 X101.448 Y105.798 E0.01205 ; perimeter
G1 X101.459 Y105.737 E0.00208 ; perimeter
G1 X101.575 Y105.585 E0.00649 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.678 Y105.983 E-0.10850 ; wipe and retract
G1 X101.385 Y106.356 E-0.12529 ; wipe and retract
G1 X101.281 Y106.567 E-0.06220 ; wipe and retract
G1 X101.116 Y107.194 E-0.17087 ; wipe and retract
G1 X101.025 Y107.386 E-0.05618 ; wipe and retract
G1 X101.188 Y106.815 E-0.15668 ; wipe and retract
G1 X101.204 Y106.508 E-0.08121 ; wipe and retract
G1 X101.163 Y106.292 E-0.05796 ; wipe and retract
G1 X101.171 Y106.244 E-0.01278 ; wipe and retract
G1 X101.243 Y106.089 E-0.04522 ; wipe and retract
G1 X101.448 Y105.798 E-0.09395 ; wipe and retract
G1 X101.459 Y105.737 E-0.01619 ; wipe and retract
G1 X101.575 Y105.585 E-0.05060 ; wipe and retract
;WIPE_END
G1 E-1.36237 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X100.237 Y107.943 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.082 Y108.029 E0.00600 ; perimeter
G1 X100.103 Y107.981 E0.00179 ; perimeter
G1 X100.183 Y107.969 E0.00273 ; perimeter
G1 X99.740 Y108.809 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X99.712 Y109.015 E0.00701 ; perimeter
G1 X99.825 Y109.219 E0.00791 ; perimeter
G1 X99.617 Y109.143 E0.00751 ; perimeter
G1 X99.561 Y109.100 E0.00237 ; perimeter
G1 X99.626 Y109.018 E0.00351 ; perimeter
G1 X99.706 Y108.859 E0.00606 ; perimeter
G1 X100.718 Y109.999 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X101.032 Y110.170 E0.01209 ; perimeter
G1 X100.965 Y110.302 E0.00501 ; perimeter
G1 X100.822 Y110.443 E0.00679 ; perimeter
G1 X100.732 Y110.058 E0.01338 ; perimeter
G1 X100.747 Y111.055 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X100.768 Y111.171 E0.00397 ; perimeter
G1 X100.716 Y111.149 E0.00192 ; perimeter
G1 X100.460 Y111.175 E0.00872 ; perimeter
G1 X100.692 Y111.078 E0.00850 ; perimeter
G1 X100.642 Y111.641 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.061 Y111.818 E0.02109 ; perimeter
G1 X101.593 Y112.148 E0.02897 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.697 Y112.212 E0.00510 ; perimeter (bridge)
G1 X101.704 Y112.250 E0.00161 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.808 Y112.746 E0.02349 ; perimeter
G1 X101.270 Y113.465 E0.04157 ; perimeter
G1 X100.803 Y113.704 E0.02431 ; perimeter
G1 X99.582 Y114.149 E0.06020 ; perimeter
G1 X99.102 Y114.141 E0.02225 ; perimeter
G1 X98.707 Y113.940 E0.02055 ; perimeter
G1 X98.324 Y113.624 E0.02299 ; perimeter
G1 X98.143 Y113.326 E0.01613 ; perimeter
G1 X98.092 Y112.853 E0.02202 ; perimeter
G1 X98.286 Y112.267 E0.02861 ; perimeter
G1 X98.395 Y112.184 E0.00634 ; perimeter
G1 X98.570 Y111.972 E0.01273 ; perimeter
G1 X99.462 Y111.801 E0.04205 ; perimeter
G1 X99.996 Y111.663 E0.02558 ; perimeter
G1 X100.326 Y111.681 E0.01528 ; perimeter
G1 X100.582 Y111.647 E0.01198 ; perimeter
G1 X100.923 Y111.356 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.061 Y111.818 E-0.13426 ; wipe and retract
G1 X101.593 Y112.148 E-0.16506 ; wipe and retract
;WIPE_END
G1 E-2.10068 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X101.837 Y113.513 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.831 Y113.759 E0.00835 ; perimeter
G1 X102.112 Y114.076 E0.01435 ; perimeter
G1 X101.637 Y113.947 E0.01667 ; perimeter
G1 X101.320 Y113.981 E0.01079 ; perimeter
G1 X101.590 Y113.843 E0.01024 ; perimeter
G1 X101.801 Y113.561 E0.01193 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.831 Y113.759 E-0.05302 ; wipe and retract
G1 X102.112 Y114.076 E-0.11191 ; wipe and retract
G1 X101.637 Y113.947 E-0.12995 ; wipe and retract
G1 X101.320 Y113.981 E-0.08412 ; wipe and retract
G1 X101.590 Y113.843 E-0.07986 ; wipe and retract
G1 X101.801 Y113.561 E-0.09302 ; wipe and retract
;WIPE_END
G1 E-1.84812 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X97.773 Y113.646 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X97.652 Y113.600 E0.00439 ; perimeter
G1 X97.685 Y113.501 E0.00352 ; perimeter
G1 X97.742 Y113.595 E0.00371 ; perimeter
G1 X98.049 Y111.842 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X98.022 Y111.706 E0.00469 ; perimeter
G1 X98.216 Y111.645 E0.00688 ; perimeter
G1 X98.089 Y111.798 E0.00674 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.022 Y111.706 E-0.02996 ; wipe and retract
G1 X98.216 Y111.645 E-0.05367 ; wipe and retract
G1 X98.089 Y111.798 E-0.05258 ; wipe and retract
;WIPE_END
G1 E-2.26379 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X100.383 Y110.684 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.263 Y110.168 E0.02457 ; perimeter
G1 X99.983 Y109.924 E0.01715 ; perimeter
G1 X99.903 Y109.888 E0.00408 ; perimeter
G1 X99.619 Y109.657 E0.01698 ; perimeter
G1 X99.380 Y109.569 E0.01176 ; perimeter
G1 X99.185 Y109.418 E0.01143 ; perimeter
G1 X99.062 Y109.280 E0.00860 ; perimeter
G1 X99.035 Y109.205 E0.00367 ; perimeter
G1 X99.086 Y108.923 E0.01328 ; perimeter
G1 X99.217 Y108.758 E0.00979 ; perimeter
G1 X99.321 Y108.552 E0.01067 ; perimeter
G1 X99.480 Y108.381 E0.01083 ; perimeter
G1 X99.529 Y108.142 E0.01130 ; perimeter
G1 X99.665 Y107.764 E0.01860 ; perimeter
G1 X99.779 Y107.606 E0.00902 ; perimeter
G1 X99.970 Y107.497 E0.01018 ; perimeter
G1 X100.048 Y107.498 E0.00360 ; perimeter
G1 X100.566 Y107.237 E0.02690 ; perimeter
G1 X100.709 Y106.736 E0.02414 ; perimeter
G1 X100.719 Y106.541 E0.00904 ; perimeter
G1 X100.673 Y106.297 E0.01148 ; perimeter
G1 X100.706 Y106.101 E0.00922 ; perimeter
G1 X100.824 Y105.846 E0.01299 ; perimeter
G1 X100.993 Y105.606 E0.01360 ; perimeter
G1 X101.006 Y105.537 E0.00325 ; perimeter
G1 X101.145 Y105.355 E0.01062 ; perimeter
G1 X101.134 Y105.147 E0.00965 ; perimeter
G1 X101.259 Y104.822 E0.01614 ; perimeter
G1 X101.319 Y104.745 E0.00450 ; perimeter
G1 X101.430 Y104.511 E0.01199 ; perimeter
G1 X101.568 Y104.434 E0.00734 ; perimeter
G1 X101.744 Y104.168 E0.01479 ; perimeter
G1 X101.798 Y104.005 E0.00795 ; perimeter
G1 X101.795 Y104.317 E0.01446 ; perimeter
G1 X101.929 Y104.622 E0.01543 ; perimeter
G1 X102.014 Y104.755 E0.00733 ; perimeter
G1 X102.044 Y104.896 E0.00669 ; perimeter
G1 X102.074 Y105.391 E0.02297 ; perimeter
G1 X102.141 Y105.712 E0.01518 ; perimeter
G1 X102.134 Y105.777 E0.00301 ; perimeter
G1 X102.178 Y105.935 E0.00760 ; perimeter
G1 X102.162 Y105.979 E0.00217 ; perimeter
G1 X102.171 Y106.084 E0.00489 ; perimeter
G1 X102.058 Y106.295 E0.01109 ; perimeter
G1 X101.793 Y106.618 E0.01936 ; perimeter
G1 X101.732 Y106.742 E0.00638 ; perimeter
G1 X101.611 Y107.161 E0.02019 ; perimeter
G1 X101.585 Y107.316 E0.00730 ; perimeter
G1 X101.520 Y107.498 E0.00892 ; perimeter
G1 X101.351 Y107.779 E0.01521 ; perimeter
G1 X101.251 Y107.829 E0.00517 ; perimeter
G1 X101.142 Y107.938 E0.00713 ; perimeter
G1 X100.660 Y108.206 E0.02559 ; perimeter
G1 X100.513 Y108.345 E0.00938 ; perimeter
G1 X100.373 Y108.420 E0.00731 ; perimeter
G1 X100.257 Y108.583 E0.00929 ; perimeter
G1 X100.211 Y108.921 E0.01579 ; perimeter
G1 X100.320 Y109.118 E0.01045 ; perimeter
G1 X100.427 Y109.201 E0.00625 ; perimeter
G1 X100.487 Y109.297 E0.00524 ; perimeter
G1 X100.608 Y109.390 E0.00708 ; perimeter
G1 X101.402 Y109.823 E0.04186 ; perimeter
G1 X101.589 Y109.945 E0.01034 ; perimeter
G1 X101.627 Y110.055 E0.00539 ; perimeter
G1 X101.610 Y110.147 E0.00438 ; perimeter
G1 X101.348 Y110.602 E0.02429 ; perimeter
G1 X101.183 Y110.763 E0.01068 ; perimeter
G1 X101.289 Y111.336 E0.02698 ; perimeter
G1 X101.813 Y111.772 E0.03155 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.094 Y112.005 E0.01525 ; perimeter (bridge)
G1 X102.764 Y112.249 E0.02983 ; perimeter (bridge)
G1 X102.696 Y112.299 E0.00353 ; perimeter (bridge)
G1 X102.638 Y112.435 E0.00619 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.327 Y113.169 E0.03694 ; perimeter
G1 X102.317 Y113.581 E0.01909 ; perimeter
G1 X102.656 Y113.962 E0.02364 ; perimeter
G1 X102.985 Y114.142 E0.01738 ; perimeter
G1 X103.335 Y114.292 E0.01761 ; perimeter
G1 X103.707 Y114.534 E0.02056 ; perimeter
G1 X104.166 Y114.673 E0.02223 ; perimeter
G1 X104.649 Y114.617 E0.02253 ; perimeter
G1 X105.002 Y114.621 E0.01635 ; perimeter
G1 X105.349 Y114.795 E0.01796 ; perimeter
G1 X105.502 Y114.899 E0.00857 ; perimeter
G1 X105.823 Y115.032 E0.01608 ; perimeter
G1 X105.922 Y115.099 E0.00554 ; perimeter
G1 X106.005 Y115.166 E0.00496 ; perimeter
G1 X106.126 Y115.322 E0.00914 ; perimeter
G1 X106.133 Y115.439 E0.00543 ; perimeter
G1 X106.014 Y115.543 E0.00729 ; perimeter
G1 X105.655 Y115.629 E0.01709 ; perimeter
G1 X105.298 Y115.618 E0.01656 ; perimeter
G1 X104.793 Y115.518 E0.02384 ; perimeter
G1 X104.363 Y115.336 E0.02162 ; perimeter
G1 X104.091 Y115.171 E0.01475 ; perimeter
G1 X103.410 Y114.943 E0.03327 ; perimeter
G1 X103.070 Y114.868 E0.01611 ; perimeter
G1 X102.450 Y114.667 E0.03018 ; perimeter
G1 X101.598 Y114.436 E0.04089 ; perimeter
G1 X101.241 Y114.474 E0.01665 ; perimeter
G1 X101.156 Y114.462 E0.00394 ; perimeter
G1 X100.964 Y114.505 E0.00912 ; perimeter
G1 X99.684 Y114.880 E0.06179 ; perimeter
G1 X99.209 Y114.954 E0.02228 ; perimeter
G1 X99.031 Y114.925 E0.00836 ; perimeter
G1 X98.890 Y114.882 E0.00684 ; perimeter
G1 X97.923 Y114.219 E0.05429 ; perimeter
G1 X97.433 Y114.032 E0.02429 ; perimeter
G1 X97.224 Y113.932 E0.01072 ; perimeter
G1 X97.137 Y113.833 E0.00610 ; perimeter
G1 X97.123 Y113.714 E0.00558 ; perimeter
G1 X97.218 Y113.354 E0.01724 ; perimeter
G1 X97.346 Y113.108 E0.01282 ; perimeter
G1 X97.478 Y112.740 E0.01814 ; perimeter
G1 X97.567 Y112.327 E0.01954 ; perimeter
G1 X97.602 Y112.042 E0.01330 ; perimeter
G1 X97.537 Y111.783 E0.01237 ; perimeter
G1 X97.543 Y111.619 E0.00762 ; perimeter
G1 X97.570 Y111.484 E0.00635 ; perimeter
G1 X97.638 Y111.346 E0.00712 ; perimeter
G1 X97.790 Y111.252 E0.00829 ; perimeter
G1 X97.893 Y111.242 E0.00479 ; perimeter
G1 X98.134 Y111.165 E0.01171 ; perimeter
G1 X98.663 Y111.104 E0.02470 ; perimeter
G1 X99.187 Y111.029 E0.02450 ; perimeter
G1 X99.532 Y110.951 E0.01639 ; perimeter
G1 X99.800 Y110.927 E0.01244 ; perimeter
G1 X100.328 Y110.707 E0.02650 ; perimeter
G1 X100.771 Y110.584 F10800.000 ; move inwards before travel
G1 X100.220 Y111.212 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.338231
G1 F2400.000
G1 X99.937 Y111.283 E0.00718 ; infill
;WIDTH:0.32494
G1 X99.254 Y111.428 E0.01637 ; infill
G1 X98.449 Y111.560 E0.01912 ; infill
G1 X97.903 Y112.352 F10800.000 ; move to first infill point
;WIDTH:0.234999
G1 F2400.000
G1 X97.782 Y112.805 E0.00749 ; infill
;WIDTH:0.181254
G1 X97.737 Y113.123 E0.00369 ; infill
G1 X98.055 Y113.684 F10800.000 ; move to first infill point
;WIDTH:0.227667
G1 F2400.000
G1 X98.057 Y113.878 E0.00298 ; infill
G1 X98.532 Y114.225 E0.00903 ; infill
;WIDTH:0.254017
G1 X98.726 Y114.339 E0.00396 ; infill
;WIDTH:0.281588
G1 X98.928 Y114.457 E0.00464 ; infill
;WIDTH:0.293933
G1 X99.080 Y114.533 E0.00355 ; infill
G1 X99.211 Y114.546 E0.00274 ; infill
G1 X99.665 Y114.507 E0.00951 ; infill
;WIDTH:0.31842
G1 X100.927 Y114.094 E0.03042 ; infill
G1 X101.035 Y113.867 E0.00576 ; infill
G1 X102.286 Y112.331 F10800.000 ; move to first infill point
;WIDTH:0.199015
G1 F2400.000
G1 X102.124 Y112.847 E0.00701 ; infill
G1 X101.974 Y113.114 E0.00398 ; infill
;WIDTH:0.300146
G1 X101.915 Y113.285 E0.00385 ; infill
G1 X102.400 Y114.069 F10800.000 ; move to first infill point
;WIDTH:0.257302
G1 F2400.000
G1 X102.435 Y114.272 E0.00367 ; infill
G1 X102.835 Y114.441 E0.00774 ; infill
;WIDTH:0.143993
G1 X103.454 Y114.683 E0.00558 ; infill
G1 X104.196 Y114.925 F10800.000 ; move to first infill point
;WIDTH:0.415895
G1 F2400.000
G1 X104.538 Y114.996 E0.01083 ; infill
;WIDTH:0.426957
G1 X104.880 Y115.068 E0.01115 ; infill
G1 X105.769 Y115.354 E0.02983 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.880 Y115.068 E-0.24650 ; wipe and retract
G1 X104.538 Y114.996 E-0.09218 ; wipe and retract
;WIPE_END
G1 E-2.06132 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X99.859 Y109.512 ; move to first infill point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.13122
G1 F2400.000
G1 X99.961 Y109.570 E0.00086 ; infill
;WIDTH:0.165521
G1 X100.063 Y109.629 E0.00120 ; infill
;WIDTH:0.17584
G1 X100.159 Y109.669 E0.00115 ; infill
;WIDTH:0.208403
G1 X100.295 Y109.750 E0.00218 ; infill
;WIDTH:0.240967
G1 X100.431 Y109.831 E0.00261 ; infill
G1 X100.364 Y109.645 F10800.000 ; move to first infill point
;WIDTH:0.125885
G1 F2400.000
G1 X100.286 Y109.487 E0.00121 ; infill
;WIDTH:0.107555
G1 X100.225 Y109.385 E0.00064 ; infill
;WIDTH:0.0988159
G1 X100.204 Y109.360 E0.00015 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.225 Y109.385 E-0.00838 ; wipe and retract
;WIPE_END
G1 E-2.39162 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X101.385 Y105.330 ; move to first infill point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.217559
G1 F2400.000
G1 X101.501 Y105.139 E0.00325 ; infill
;WIDTH:0.232851
G1 X101.659 Y104.876 E0.00485 ; infill
G1 X101.720 Y104.901 E0.00103 ; infill
;WIDTH:0.110391
G1 X101.762 Y104.934 E0.00030 ; infill
G1 X101.789 Y105.082 E0.00084 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.762 Y104.934 E-0.03958 ; wipe and retract
G1 X101.720 Y104.901 E-0.01424 ; wipe and retract
;WIPE_END
G1 E-2.34618 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X103.086 Y99.130 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.007 Y99.016 E0.00470 ; perimeter
G1 X102.891 Y98.951 E0.00448 ; perimeter
G1 X103.211 Y98.853 E0.01132 ; perimeter
G1 X103.152 Y98.925 E0.00316 ; perimeter
G1 X103.113 Y99.077 E0.00533 ; perimeter
G1 X103.263 Y99.773 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.164 Y99.824 E0.00520 ; perimeter
G1 X103.030 Y99.801 E0.00629 ; perimeter
G1 X102.959 Y99.701 E0.00566 ; perimeter
G1 X102.826 Y99.601 E0.00772 ; perimeter
G1 X102.674 Y99.382 E0.01233 ; perimeter
G1 X102.149 Y99.089 E0.02789 ; perimeter
G1 X101.673 Y98.975 E0.02265 ; perimeter
G1 X101.325 Y98.957 E0.01617 ; perimeter
G1 X101.161 Y99.024 E0.00817 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.132 Y99.036 E0.00135 ; perimeter (bridge)
G1 X101.145 Y98.920 E0.00488 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.206 Y98.691 E0.01098 ; perimeter
G1 X101.387 Y98.246 E0.02229 ; perimeter
G1 X101.479 Y98.169 E0.00556 ; perimeter
G1 X101.653 Y98.163 E0.00805 ; perimeter
G1 X102.524 Y98.401 E0.04182 ; perimeter
G1 X102.850 Y98.460 E0.01534 ; perimeter
G1 X103.041 Y98.400 E0.00927 ; perimeter
G1 X103.750 Y97.974 E0.03831 ; perimeter
G1 X103.983 Y97.906 E0.01124 ; perimeter
G1 X104.064 Y97.918 E0.00382 ; perimeter
G1 X104.192 Y98.024 E0.00766 ; perimeter
G1 X104.203 Y98.057 E0.00164 ; perimeter
G1 X104.137 Y98.328 E0.01293 ; perimeter
G1 X103.835 Y98.853 E0.02805 ; perimeter
G1 X103.593 Y99.147 E0.01762 ; perimeter
G1 X103.558 Y99.286 E0.00664 ; perimeter
G1 X103.297 Y99.723 E0.02357 ; perimeter
G1 X103.159 Y99.733 F10800.000 ; move inwards before travel
G1 X103.398 Y98.698 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.194484
G1 F2400.000
G1 X103.916 Y98.177 E0.00926 ; infill
G1 X103.923 Y98.189 F10800.000 ; move to first infill point
;WIDTH:0.121936
G1 F2400.000
G1 X103.346 Y98.620 E0.00473 ; infill
G1 X102.779 Y98.720 F10800.000 ; move to first infill point
;WIDTH:0.242518
G1 F2400.000
G1 X101.803 Y98.758 E0.01621 ; infill
G1 X101.522 Y98.555 F10800.000 ; move to first infill point
;WIDTH:0.324352
G1 F2400.000
G1 X101.742 Y98.591 E0.00523 ; infill
G1 X102.298 Y98.735 E0.01344 ; infill
G1 X102.285 Y98.887 E0.00356 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.298 Y98.735 E-0.04014 ; wipe and retract
G1 X101.742 Y98.591 E-0.15160 ; wipe and retract
G1 X101.522 Y98.555 E-0.05894 ; wipe and retract
;WIPE_END
G1 E-2.14932 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X106.393 Y98.656 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.625 Y98.672 E0.01079 ; perimeter
G1 X106.809 Y98.758 E0.00937 ; perimeter
G1 X109.027 Y99.395 E0.10692 ; perimeter
G1 X109.432 Y99.563 E0.02028 ; perimeter
G1 X109.821 Y99.750 E0.02001 ; perimeter
G1 X110.277 Y100.036 E0.02496 ; perimeter
G1 X110.381 Y100.065 E0.00497 ; perimeter
G1 X110.441 Y100.124 E0.00392 ; perimeter
G1 X110.809 Y100.315 E0.01920 ; perimeter
G1 X111.222 Y100.698 E0.02608 ; perimeter
G1 X111.382 Y100.890 E0.01156 ; perimeter
G1 X111.576 Y101.079 E0.01256 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.668 Y101.154 E0.00498 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X112.237 Y101.137 E0.02637 ; perimeter
G1 X112.392 Y101.166 E0.00729 ; perimeter
G1 X112.665 Y101.156 E0.01266 ; perimeter
G1 X113.090 Y101.181 E0.01972 ; perimeter
G1 X113.422 Y101.352 E0.01729 ; perimeter
G1 X113.698 Y101.610 E0.01750 ; perimeter
G1 X113.814 Y101.692 E0.00658 ; perimeter
G1 X113.954 Y101.873 E0.01062 ; perimeter
G1 X114.029 Y102.101 E0.01109 ; perimeter
G1 X114.038 Y102.295 E0.00902 ; perimeter
G1 X114.020 Y102.356 E0.00293 ; perimeter
G1 X113.952 Y102.433 E0.00476 ; perimeter
G1 X113.663 Y102.453 E0.01345 ; perimeter
G1 X113.422 Y102.384 E0.01159 ; perimeter
G1 X112.443 Y101.904 E0.05052 ; perimeter
G1 X112.029 Y101.670 E0.02203 ; perimeter
G1 X111.666 Y101.354 E0.02229 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.547 Y101.250 E0.00660 ; perimeter (bridge)
G1 X111.483 Y101.242 E0.00271 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.830 Y101.159 E0.03048 ; perimeter
G1 X110.414 Y101.013 E0.02043 ; perimeter
G1 X110.159 Y100.872 E0.01351 ; perimeter
G1 X109.684 Y100.556 E0.02640 ; perimeter
G1 X109.204 Y100.350 E0.02419 ; perimeter
G1 X108.768 Y100.125 E0.02274 ; perimeter
G1 X108.284 Y99.922 E0.02431 ; perimeter
G1 X107.899 Y99.850 E0.01814 ; perimeter
G1 X107.556 Y99.757 E0.01645 ; perimeter
G1 X107.419 Y99.774 E0.00642 ; perimeter
G1 X106.839 Y99.711 E0.02699 ; perimeter
G1 X106.563 Y99.645 E0.01316 ; perimeter
G1 X106.404 Y99.577 E0.00800 ; perimeter
G1 X106.241 Y99.428 E0.01022 ; perimeter
G1 X106.183 Y99.296 E0.00669 ; perimeter
G1 X106.141 Y99.131 E0.00790 ; perimeter
G1 X106.177 Y99.007 E0.00596 ; perimeter
G1 X106.158 Y98.891 E0.00546 ; perimeter
G1 X106.220 Y98.809 E0.00472 ; perimeter
G1 X106.247 Y98.705 E0.00501 ; perimeter
G1 X106.336 Y98.675 E0.00436 ; perimeter
G1 X106.546 Y98.831 F10800.000 ; move inwards before travel
G1 X106.426 Y98.937 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.400358
G1 F2400.000
G1 X106.653 Y99.187 E0.01004 ; infill
G1 X106.908 Y99.261 E0.00790 ; infill
G1 X107.426 Y99.363 E0.01568 ; infill
G1 X107.558 Y99.374 F10800.000 ; move to first infill point
;WIDTH:0.269538
G1 F2400.000
G1 X108.398 Y99.585 E0.01633 ; infill
;WIDTH:0.302163
G1 X108.649 Y99.673 E0.00573 ; infill
;WIDTH:0.317201
G1 X108.937 Y99.777 E0.00698 ; infill
G1 X109.875 Y100.229 E0.02376 ; infill
;WIDTH:0.329997
G1 X110.140 Y100.397 E0.00748 ; infill
;WIDTH:0.338693
G1 X110.240 Y100.459 E0.00291 ; infill
;WIDTH:0.365223
G1 X110.564 Y100.636 E0.00988 ; infill
G1 X110.975 Y100.935 E0.01361 ; infill
G1 X112.143 Y101.450 F10800.000 ; move to first infill point
;WIDTH:0.366567
G1 F2400.000
G1 X112.656 Y101.559 E0.01410 ; infill
;WIDTH:0.408464
G1 X112.765 Y101.589 E0.00345 ; infill
;WIDTH:0.450362
G1 X112.874 Y101.620 E0.00385 ; infill
;WIDTH:0.488958
G1 X112.984 Y101.650 E0.00421 ; infill
G1 X113.153 Y101.735 E0.00701 ; infill
G1 X113.290 Y101.829 E0.00618 ; infill
;WIDTH:0.349696
G1 X113.591 Y102.033 E0.00927 ; infill
G1 X114.706 Y103.194 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.703 Y103.099 E0.00439 ; perimeter
G1 X114.729 Y103.066 E0.00195 ; perimeter
G1 X115.062 Y102.996 E0.01576 ; perimeter
G1 X115.349 Y103.070 E0.01374 ; perimeter
G1 X115.396 Y103.100 E0.00257 ; perimeter
G1 X115.537 Y103.275 E0.01043 ; perimeter
G1 X115.599 Y103.474 E0.00966 ; perimeter
G1 X115.615 Y103.657 E0.00848 ; perimeter
G1 X115.675 Y103.873 E0.01041 ; perimeter
G1 X115.708 Y104.093 E0.01032 ; perimeter
G1 X115.782 Y104.238 E0.00752 ; perimeter
G1 X115.854 Y104.488 E0.01207 ; perimeter
G1 X115.863 Y104.798 E0.01438 ; perimeter
G1 X115.835 Y104.910 E0.00534 ; perimeter
G1 X115.771 Y105.069 E0.00795 ; perimeter
G1 X115.680 Y105.165 E0.00611 ; perimeter
G1 X115.474 Y105.202 E0.00972 ; perimeter
G1 X115.330 Y105.152 E0.00704 ; perimeter
G1 X115.285 Y105.122 E0.00250 ; perimeter
G1 X115.259 Y105.073 E0.00256 ; perimeter
G1 X115.168 Y104.878 E0.00997 ; perimeter
G1 X115.066 Y104.084 E0.03709 ; perimeter
G1 X114.926 Y103.823 E0.01373 ; perimeter
G1 X114.801 Y103.663 E0.00938 ; perimeter
G1 X114.694 Y103.395 E0.01337 ; perimeter
G1 X114.687 Y103.250 E0.00672 ; perimeter
G1 X114.784 Y103.140 F10800.000 ; move inwards before travel
G1 X115.046 Y103.246 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.378968
G1 F2400.000
G1 X115.451 Y104.006 E0.02407 ; infill
G1 X115.105 Y103.249 F10800.000 ; move to first infill point
;WIDTH:0.201383
G1 F2400.000
G1 X115.368 Y103.972 E0.01014 ; infill
G1 X115.405 Y104.205 E0.00311 ; infill
;WIDTH:0.23104
G1 X115.430 Y104.286 E0.00133 ; infill
;WIDTH:0.259376
G1 X115.492 Y104.544 E0.00478 ; infill
G1 X115.524 Y104.948 E0.00729 ; infill
G1 X115.568 Y106.658 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.660 Y106.688 E0.00448 ; perimeter
G1 X115.780 Y106.810 E0.00791 ; perimeter
G1 X115.882 Y107.034 E0.01140 ; perimeter
G1 X115.909 Y107.297 E0.01225 ; perimeter
G1 X115.879 Y107.539 E0.01129 ; perimeter
G1 X115.812 Y107.707 E0.00840 ; perimeter
G1 X115.677 Y107.858 E0.00936 ; perimeter
G1 X115.490 Y107.919 E0.00912 ; perimeter
G1 X115.424 Y107.905 E0.00312 ; perimeter
G1 X115.258 Y107.766 E0.01005 ; perimeter
G1 X115.176 Y107.612 E0.00806 ; perimeter
G1 X115.112 Y107.288 E0.01529 ; perimeter
G1 X115.179 Y106.945 E0.01620 ; perimeter
G1 X115.247 Y106.810 E0.00702 ; perimeter
G1 X115.390 Y106.683 E0.00883 ; perimeter
G1 X115.515 Y106.647 E0.00603 ; perimeter
G1 X115.611 Y106.745 F10800.000 ; move inwards before travel
G1 X115.530 Y106.900 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.347783
G1 F2400.000
G1 X115.519 Y107.446 E0.01386 ; infill
;WIDTH:0.298361
G1 X115.515 Y107.491 E0.00097 ; infill
;WIDTH:0.272427
G1 X115.517 Y107.524 E0.00062 ; infill
;WIDTH:0.245001
G1 X115.512 Y107.559 E0.00060 ; infill
;WIDTH:0.204226
G1 X115.516 Y107.608 E0.00065 ; infill
;WIDTH:0.167183
G1 X115.519 Y107.656 E0.00050 ; infill
G1 X115.499 Y107.654 F10800.000 ; move to first infill point
;WIDTH:0.256144
G1 F2400.000
G1 X115.512 Y107.013 E0.01137 ; infill
;WIDTH:0.216639
G1 X115.535 Y106.905 E0.00159 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.512 Y107.013 E-0.02911 ; wipe and retract
;WIPE_END
G1 E-2.37089 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X115.568 Y110.015 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.703 Y110.051 E0.00644 ; perimeter
G1 X115.783 Y110.111 E0.00464 ; perimeter
G1 X115.828 Y110.191 E0.00425 ; perimeter
G1 X115.879 Y110.382 E0.00919 ; perimeter
G1 X115.867 Y110.597 E0.00994 ; perimeter
G1 X115.806 Y110.752 E0.00772 ; perimeter
G1 X115.673 Y110.863 E0.00803 ; perimeter
G1 X115.559 Y110.897 E0.00551 ; perimeter
G1 X115.373 Y110.872 E0.00867 ; perimeter
G1 X115.278 Y110.817 E0.00510 ; perimeter
G1 X115.239 Y110.775 E0.00268 ; perimeter
G1 X115.184 Y110.642 E0.00666 ; perimeter
G1 X115.160 Y110.484 E0.00738 ; perimeter
G1 X115.167 Y110.318 E0.00772 ; perimeter
G1 X115.305 Y110.068 E0.01320 ; perimeter
G1 X115.395 Y110.025 E0.00463 ; perimeter
G1 X115.508 Y110.018 E0.00527 ; perimeter
G1 X115.624 Y110.142 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.703 Y110.051 E-0.05194 ; wipe and retract
G1 X115.783 Y110.111 E-0.02644 ; wipe and retract
G1 X115.828 Y110.191 E-0.02423 ; wipe and retract
G1 X115.879 Y110.382 E-0.05236 ; wipe and retract
G1 X115.867 Y110.597 E-0.05664 ; wipe and retract
G1 X115.806 Y110.752 E-0.04399 ; wipe and retract
G1 X115.673 Y110.863 E-0.04573 ; wipe and retract
G1 X115.559 Y110.897 E-0.03137 ; wipe and retract
G1 X115.373 Y110.872 E-0.04938 ; wipe and retract
G1 X115.278 Y110.817 E-0.02908 ; wipe and retract
G1 X115.239 Y110.775 E-0.01526 ; wipe and retract
G1 X115.184 Y110.642 E-0.03793 ; wipe and retract
G1 X115.160 Y110.484 E-0.04202 ; wipe and retract
G1 X115.167 Y110.318 E-0.04398 ; wipe and retract
G1 X115.305 Y110.068 E-0.07519 ; wipe and retract
G1 X115.395 Y110.025 E-0.02636 ; wipe and retract
G1 X115.508 Y110.018 E-0.03004 ; wipe and retract
;WIPE_END
G1 E-1.71808 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X115.356 Y114.929 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.433 Y114.984 E0.00438 ; perimeter
G1 X115.493 Y115.068 E0.00475 ; perimeter
G1 X115.527 Y115.148 E0.00404 ; perimeter
G1 X115.545 Y115.284 E0.00633 ; perimeter
G1 X115.522 Y115.389 E0.00499 ; perimeter
G1 X115.422 Y115.553 E0.00887 ; perimeter
G1 X115.201 Y115.753 E0.01384 ; perimeter
G1 X115.120 Y115.787 E0.00407 ; perimeter
G1 X114.981 Y115.810 E0.00654 ; perimeter
G1 X114.742 Y115.772 E0.01121 ; perimeter
G1 X114.633 Y115.697 E0.00609 ; perimeter
G1 X114.538 Y115.496 E0.01032 ; perimeter
G1 X114.524 Y115.391 E0.00489 ; perimeter
G1 X114.621 Y115.158 E0.01173 ; perimeter
G1 X114.766 Y115.009 E0.00962 ; perimeter
G1 X114.948 Y114.903 E0.00974 ; perimeter
G1 X115.056 Y114.880 E0.00516 ; perimeter
G1 X115.224 Y114.885 E0.00777 ; perimeter
G1 X115.300 Y114.911 E0.00368 ; perimeter
G1 X115.362 Y115.024 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.433 Y114.984 E-0.04037 ; wipe and retract
G1 X115.493 Y115.068 E-0.02707 ; wipe and retract
G1 X115.527 Y115.148 E-0.02302 ; wipe and retract
G1 X115.545 Y115.284 E-0.03607 ; wipe and retract
G1 X115.522 Y115.389 E-0.02842 ; wipe and retract
G1 X115.422 Y115.553 E-0.05055 ; wipe and retract
G1 X115.201 Y115.753 E-0.07884 ; wipe and retract
G1 X115.120 Y115.787 E-0.02317 ; wipe and retract
G1 X114.981 Y115.810 E-0.03724 ; wipe and retract
G1 X114.742 Y115.772 E-0.06385 ; wipe and retract
G1 X114.633 Y115.697 E-0.03468 ; wipe and retract
G1 X114.538 Y115.496 E-0.05880 ; wipe and retract
G1 X114.524 Y115.391 E-0.02785 ; wipe and retract
G1 X114.621 Y115.158 E-0.06680 ; wipe and retract
G1 X114.766 Y115.009 E-0.05481 ; wipe and retract
G1 X114.948 Y114.903 E-0.05550 ; wipe and retract
G1 X115.056 Y114.880 E-0.02939 ; wipe and retract
G1 X115.224 Y114.885 E-0.04429 ; wipe and retract
G1 X115.300 Y114.911 E-0.02096 ; wipe and retract
;WIPE_END
G1 E-1.59831 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 X112.713 Y115.531 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.795 Y115.640 E0.00632 ; perimeter
G1 X112.803 Y115.768 E0.00593 ; perimeter
G1 X112.782 Y115.855 E0.00416 ; perimeter
G1 X112.607 Y116.030 E0.01147 ; perimeter
G1 X112.422 Y116.101 E0.00918 ; perimeter
G1 X111.898 Y116.165 E0.02444 ; perimeter
G1 X111.444 Y116.164 E0.02102 ; perimeter
G1 X110.932 Y116.077 E0.02406 ; perimeter
G1 X110.555 Y115.960 E0.01827 ; perimeter
G1 X110.303 Y115.810 E0.01361 ; perimeter
G1 X110.263 Y115.748 E0.00342 ; perimeter
G1 X110.481 Y115.603 E0.01209 ; perimeter
G1 X111.056 Y115.438 E0.02773 ; perimeter
G1 X111.329 Y115.412 E0.01272 ; perimeter
G1 X111.505 Y115.363 E0.00844 ; perimeter
G1 X111.651 Y115.349 E0.00681 ; perimeter
G1 X112.201 Y115.373 E0.02547 ; perimeter
G1 X112.534 Y115.446 E0.01583 ; perimeter
G1 X112.658 Y115.505 E0.00637 ; perimeter
G1 X112.687 Y115.665 F10800.000 ; move inwards before travel
G1 X112.553 Y115.756 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.210117
G1 F2400.000
G1 X112.251 Y115.756 E0.00420 ; infill
;WIDTH:0.321593
G1 X111.578 Y115.761 E0.01559 ; infill
G1 X110.985 Y115.841 E0.01388 ; infill
;LAYER_CHANGE
;Z:9.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;9.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.578 Y115.761 E-0.15805 ; wipe and retract
G1 X112.251 Y115.756 E-0.17759 ; wipe and retract
;WIPE_END
G1 E-2.06436 F2400.000 ; retract
G1 Z9.075 F10800.000 ; lift Z
G1 Z9.200 ; move to next layer (45)
;AFTER_LAYER_CHANGE
;9.2
G1 Z9.275 ; lift Z
G1 X101.252 Y107.445 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.009 Y107.557 E0.00904 ; perimeter
G1 X101.217 Y106.903 E0.02323 ; perimeter
G1 X101.249 Y106.508 E0.01340 ; perimeter
G1 X101.286 Y106.350 E0.00551 ; perimeter
G1 X101.401 Y106.125 E0.00855 ; perimeter
G1 X101.545 Y105.921 E0.00846 ; perimeter
G1 X101.583 Y105.716 E0.00705 ; perimeter
G1 X101.679 Y105.590 E0.00537 ; perimeter
G1 X101.788 Y106.055 E0.01616 ; perimeter
G1 X101.753 Y106.133 E0.00291 ; perimeter
G1 X101.541 Y106.389 E0.01125 ; perimeter
G1 X101.407 Y106.631 E0.00935 ; perimeter
G1 X101.268 Y107.079 E0.01588 ; perimeter
G1 X101.298 Y107.259 E0.00619 ; perimeter
G1 X101.266 Y107.387 E0.00446 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.009 Y107.557 E-0.08121 ; wipe and retract
G1 X101.217 Y106.903 E-0.18112 ; wipe and retract
G1 X101.249 Y106.508 E-0.10444 ; wipe and retract
G1 X101.286 Y106.350 E-0.04292 ; wipe and retract
G1 X101.401 Y106.125 E-0.06664 ; wipe and retract
G1 X101.545 Y105.921 E-0.06592 ; wipe and retract
G1 X101.583 Y105.716 E-0.05495 ; wipe and retract
G1 X101.679 Y105.590 E-0.04185 ; wipe and retract
G1 X101.788 Y106.055 E-0.12595 ; wipe and retract
G1 X101.753 Y106.133 E-0.02270 ; wipe and retract
G1 X101.541 Y106.389 E-0.08773 ; wipe and retract
G1 X101.407 Y106.631 E-0.07292 ; wipe and retract
G1 X101.268 Y107.079 E-0.12378 ; wipe and retract
G1 X101.298 Y107.259 E-0.04827 ; wipe and retract
G1 X101.266 Y107.387 E-0.03475 ; wipe and retract
;WIPE_END
G1 E-1.24484 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X100.749 Y109.966 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.901 Y110.049 E0.00587 ; perimeter
G1 X101.250 Y110.126 E0.01208 ; perimeter
G1 X100.798 Y110.601 E0.02220 ; perimeter
G1 X100.878 Y111.019 E0.01441 ; perimeter
G1 X100.860 Y111.301 E0.00955 ; perimeter
G1 X100.791 Y111.264 E0.00264 ; perimeter
G1 X100.265 Y111.228 E0.01783 ; perimeter
G1 X100.783 Y110.866 E0.02141 ; perimeter
G1 X100.752 Y110.026 E0.02844 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.901 Y110.049 E-0.03998 ; wipe and retract
G1 X101.250 Y110.126 E-0.09420 ; wipe and retract
G1 X100.798 Y110.601 E-0.17308 ; wipe and retract
G1 X100.878 Y111.019 E-0.11236 ; wipe and retract
G1 X100.860 Y111.301 E-0.07448 ; wipe and retract
G1 X100.791 Y111.264 E-0.02061 ; wipe and retract
G1 X100.265 Y111.228 E-0.13903 ; wipe and retract
G1 X100.783 Y110.866 E-0.16693 ; wipe and retract
G1 X100.752 Y110.026 E-0.22171 ; wipe and retract
;WIPE_END
G1 E-1.35762 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X101.582 Y112.305 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.646 Y112.709 E0.01891 ; perimeter
G1 X101.585 Y113.017 E0.01456 ; perimeter
G1 X101.288 Y113.407 E0.02272 ; perimeter
G1 X100.991 Y113.691 E0.01901 ; perimeter
G1 X100.235 Y114.016 E0.03814 ; perimeter
G1 X99.642 Y114.244 E0.02945 ; perimeter
G1 X99.553 Y114.240 E0.00410 ; perimeter
G1 X99.183 Y114.335 E0.01770 ; perimeter
G1 X98.823 Y114.201 E0.01779 ; perimeter
G1 X98.525 Y113.985 E0.01704 ; perimeter
G1 X98.102 Y113.569 E0.02748 ; perimeter
G1 X97.974 Y113.052 E0.02466 ; perimeter
G1 X98.139 Y112.321 E0.03472 ; perimeter
G1 X98.521 Y111.922 E0.02558 ; perimeter
G1 X98.675 Y111.911 E0.00717 ; perimeter
G1 X98.929 Y111.834 E0.01231 ; perimeter
G1 X99.937 Y111.722 E0.04694 ; perimeter
G1 X100.037 Y111.696 E0.00482 ; perimeter
G1 X100.655 Y111.738 E0.02867 ; perimeter
G1 X101.151 Y112.003 E0.02608 ; perimeter
G1 X101.533 Y112.271 E0.02160 ; perimeter
G1 X101.981 Y112.337 F10800.000 ; move inwards before travel
G1 X102.064 Y112.270 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.165 Y112.326 E0.00390 ; perimeter
G1 X102.337 Y112.354 E0.00590 ; perimeter
G1 X102.225 Y112.450 E0.00499 ; perimeter
G1 X102.133 Y112.704 E0.00916 ; perimeter
G1 X102.074 Y112.329 E0.01285 ; perimeter
G1 X101.706 Y113.655 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X102.206 Y114.097 E0.02262 ; perimeter
G1 X101.722 Y113.948 E0.01713 ; perimeter
G1 X101.575 Y113.964 E0.00503 ; perimeter
G1 X101.426 Y113.942 E0.00509 ; perimeter
G1 X101.669 Y113.702 E0.01157 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.206 Y114.097 E-0.17588 ; wipe and retract
G1 X101.722 Y113.948 E-0.13355 ; wipe and retract
G1 X101.575 Y113.964 E-0.03922 ; wipe and retract
G1 X101.426 Y113.942 E-0.03967 ; wipe and retract
G1 X101.669 Y113.702 E-0.09019 ; wipe and retract
;WIPE_END
G1 E-1.92150 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X104.462 Y114.924 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.759 Y114.911 E0.01004 ; perimeter
G1 X104.788 Y114.894 E0.00114 ; perimeter
G1 X104.815 Y114.909 E0.00106 ; perimeter
G1 X104.872 Y115.040 E0.00483 ; perimeter
G1 X104.718 Y115.013 E0.00530 ; perimeter
G1 X104.519 Y114.943 E0.00712 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.759 Y114.911 E-0.06383 ; wipe and retract
G1 X104.788 Y114.894 E-0.00885 ; wipe and retract
G1 X104.815 Y114.909 E-0.00827 ; wipe and retract
G1 X104.872 Y115.040 E-0.03763 ; wipe and retract
G1 X104.718 Y115.013 E-0.04131 ; wipe and retract
G1 X104.519 Y114.943 E-0.05552 ; wipe and retract
;WIPE_END
G1 E-2.18458 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X102.290 Y113.528 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X102.807 Y113.985 E0.03195 ; perimeter
G1 X103.790 Y114.414 E0.04968 ; perimeter
G1 X104.174 Y114.453 E0.01791 ; perimeter
G1 X104.617 Y114.434 E0.02052 ; perimeter
G1 X104.796 Y114.328 E0.00966 ; perimeter
G1 X104.958 Y114.303 E0.00757 ; perimeter
G1 X105.046 Y114.486 E0.00939 ; perimeter
G1 X105.192 Y114.566 E0.00770 ; perimeter
G1 X105.263 Y114.731 E0.00834 ; perimeter
G1 X105.388 Y114.806 E0.00673 ; perimeter
G1 X105.540 Y114.967 E0.01028 ; perimeter
G1 X105.765 Y115.152 E0.01349 ; perimeter
G1 X105.810 Y115.223 E0.00391 ; perimeter
G1 X105.827 Y115.371 E0.00688 ; perimeter
G1 X105.634 Y115.497 E0.01068 ; perimeter
G1 X105.343 Y115.559 E0.01378 ; perimeter
G1 X104.983 Y115.549 E0.01667 ; perimeter
G1 X104.596 Y115.481 E0.01822 ; perimeter
G1 X103.172 Y114.984 E0.06983 ; perimeter
G1 X101.895 Y114.494 E0.06339 ; perimeter
G1 X101.684 Y114.437 E0.01013 ; perimeter
G1 X101.566 Y114.449 E0.00550 ; perimeter
G1 X101.229 Y114.401 E0.01574 ; perimeter
G1 X100.636 Y114.517 E0.02797 ; perimeter
G1 X99.881 Y114.710 E0.03612 ; perimeter
G1 X99.546 Y114.768 E0.01576 ; perimeter
G1 X99.393 Y114.771 E0.00709 ; perimeter
G1 X99.018 Y114.731 E0.01746 ; perimeter
G1 X98.854 Y114.564 E0.01083 ; perimeter
G1 X98.683 Y114.502 E0.00844 ; perimeter
G1 X98.242 Y114.220 E0.02425 ; perimeter
G1 X98.173 Y114.120 E0.00563 ; perimeter
G1 X98.052 Y114.099 E0.00567 ; perimeter
G1 X97.525 Y113.793 E0.02825 ; perimeter
G1 X97.415 Y113.644 E0.00858 ; perimeter
G1 X97.417 Y113.447 E0.00910 ; perimeter
G1 X97.573 Y112.786 E0.03148 ; perimeter
G1 X97.800 Y111.633 E0.05441 ; perimeter
G1 X97.863 Y111.493 E0.00711 ; perimeter
G1 X98.172 Y111.302 E0.01683 ; perimeter
G1 X98.861 Y111.107 E0.03314 ; perimeter
G1 X99.404 Y111.008 E0.02557 ; perimeter
G1 X99.924 Y110.878 E0.02484 ; perimeter
G1 X100.292 Y110.621 E0.02079 ; perimeter
G1 X100.274 Y110.160 E0.02138 ; perimeter
G1 X100.128 Y110.042 E0.00872 ; perimeter
G1 X100.047 Y109.926 E0.00654 ; perimeter
G1 X99.710 Y109.642 E0.02043 ; perimeter
G1 X99.600 Y109.584 E0.00574 ; perimeter
G1 X99.438 Y109.406 E0.01115 ; perimeter
G1 X99.357 Y109.235 E0.00876 ; perimeter
G1 X99.451 Y108.698 E0.02528 ; perimeter
G1 X99.681 Y108.241 E0.02371 ; perimeter
G1 X99.831 Y107.853 E0.01924 ; perimeter
G1 X99.933 Y107.687 E0.00905 ; perimeter
G1 X99.973 Y107.636 E0.00299 ; perimeter
G1 X100.071 Y107.580 E0.00524 ; perimeter
G1 X100.253 Y107.432 E0.01084 ; perimeter
G1 X100.595 Y107.267 E0.01763 ; perimeter
G1 X100.741 Y106.809 E0.02228 ; perimeter
G1 X100.772 Y106.434 E0.01742 ; perimeter
G1 X100.830 Y106.183 E0.01194 ; perimeter
G1 X100.988 Y105.875 E0.01606 ; perimeter
G1 X101.090 Y105.730 E0.00822 ; perimeter
G1 X101.129 Y105.516 E0.01005 ; perimeter
G1 X101.203 Y105.419 E0.00564 ; perimeter
G1 X101.186 Y105.101 E0.01475 ; perimeter
G1 X101.340 Y104.620 E0.02340 ; perimeter
G1 X101.482 Y104.360 E0.01374 ; perimeter
G1 X101.530 Y104.182 E0.00854 ; perimeter
G1 X101.570 Y103.758 E0.01974 ; perimeter
G1 X101.399 Y102.677 E0.05068 ; perimeter
G1 X101.504 Y102.453 E0.01147 ; perimeter
G1 X101.603 Y102.378 E0.00573 ; perimeter
G1 X101.904 Y102.424 E0.01409 ; perimeter
G1 X102.186 Y102.565 E0.01463 ; perimeter
G1 X102.269 Y102.690 E0.00693 ; perimeter
G1 X102.328 Y102.914 E0.01076 ; perimeter
G1 X102.310 Y103.165 E0.01163 ; perimeter
G1 X102.013 Y103.986 E0.04047 ; perimeter
G1 X101.961 Y104.470 E0.02252 ; perimeter
G1 X102.060 Y104.670 E0.01037 ; perimeter
G1 X102.106 Y105.260 E0.02741 ; perimeter
G1 X102.204 Y105.766 E0.02386 ; perimeter
G1 X102.293 Y106.057 E0.01409 ; perimeter
G1 X102.297 Y106.126 E0.00321 ; perimeter
G1 X102.182 Y106.371 E0.01255 ; perimeter
G1 X101.941 Y106.662 E0.01749 ; perimeter
G1 X101.853 Y106.820 E0.00839 ; perimeter
G1 X101.763 Y107.113 E0.01417 ; perimeter
G1 X101.790 Y107.280 E0.00785 ; perimeter
G1 X101.735 Y107.499 E0.01049 ; perimeter
G1 X101.737 Y107.620 E0.00560 ; perimeter
G1 X101.629 Y107.791 E0.00935 ; perimeter
G1 X101.245 Y107.995 E0.02014 ; perimeter
G1 X100.957 Y108.066 E0.01374 ; perimeter
G1 X100.376 Y108.344 E0.02983 ; perimeter
G1 X100.081 Y108.757 E0.02352 ; perimeter
G1 X100.315 Y109.179 E0.02236 ; perimeter
G1 X100.604 Y109.403 E0.01692 ; perimeter
G1 X100.887 Y109.492 E0.01374 ; perimeter
G1 X101.072 Y109.593 E0.00978 ; perimeter
G1 X101.523 Y109.692 E0.02139 ; perimeter
G1 X102.025 Y109.945 E0.02604 ; perimeter
G1 X101.991 Y110.046 E0.00494 ; perimeter
G1 X101.318 Y110.754 E0.04525 ; perimeter
G1 X101.363 Y110.989 E0.01110 ; perimeter
G1 X101.349 Y111.199 E0.00974 ; perimeter
G1 X101.783 Y111.561 E0.02619 ; perimeter
G1 X102.326 Y111.864 E0.02876 ; perimeter
G1 X102.847 Y111.947 E0.02448 ; perimeter
G1 X103.136 Y111.918 E0.01343 ; perimeter
G1 X103.236 Y111.888 E0.00484 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X103.453 Y111.822 E0.00950 ; perimeter (bridge)
G1 X103.900 Y111.762 E0.01882 ; perimeter (bridge)
G1 X103.784 Y111.892 E0.00726 ; perimeter (bridge)
G1 X103.583 Y112.008 E0.00971 ; perimeter (bridge)
G1 X103.356 Y112.170 E0.01167 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X102.969 Y112.446 E0.02200 ; perimeter
G1 X102.635 Y112.733 E0.02039 ; perimeter
G1 X102.550 Y112.969 E0.01161 ; perimeter
G1 X102.401 Y113.128 E0.01010 ; perimeter
G1 X102.400 Y113.309 E0.00836 ; perimeter
G1 X102.317 Y113.474 E0.00858 ; perimeter
G1 X102.073 Y113.864 F10800.000 ; move inwards before travel
G1 X102.412 Y114.222 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.303705
G1 F2400.000
G1 X102.611 Y114.338 E0.00499 ; infill
G1 X103.714 Y114.780 E0.02577 ; infill
;WIDTH:0.344514
G1 X103.969 Y114.836 E0.00654 ; infill
;WIDTH:0.385325
G1 X104.223 Y114.893 E0.00742 ; infill
G1 X105.127 Y114.932 F10800.000 ; move to first infill point
;WIDTH:0.193081
G1 F2400.000
G1 X105.217 Y115.070 E0.00205 ; infill
;WIDTH:0.233907
G1 X105.317 Y115.220 E0.00287 ; infill
G1 X105.268 Y115.315 E0.00170 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.317 Y115.220 E-0.02830 ; wipe and retract
G1 X105.217 Y115.070 E-0.04763 ; wipe and retract
;WIPE_END
G1 E-2.32407 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X100.808 Y114.138 ; move to first infill point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.238037
G1 F2400.000
G1 X100.689 Y114.175 E0.00202 ; infill
;WIDTH:0.211466
G1 X100.570 Y114.212 E0.00175 ; infill
;WIDTH:0.184894
G1 X100.347 Y114.288 E0.00278 ; infill
;WIDTH:0.148222
G1 X100.121 Y114.360 E0.00207 ; infill
;WIDTH:0.122429
G1 X99.897 Y114.431 E0.00155 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.121 Y114.360 E-0.06196 ; wipe and retract
;WIPE_END
G1 E-2.33804 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X97.820 Y113.685 ; move to first infill point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.227985
G1 F2400.000
G1 X97.750 Y113.535 E0.00255 ; infill
G1 X97.715 Y113.234 E0.00467 ; infill
G1 X98.046 Y111.669 F10800.000 ; move to first infill point
;WIDTH:0.252415
G1 F2400.000
G1 X98.164 Y111.747 E0.00246 ; infill
G1 X98.300 Y111.637 E0.00305 ; infill
G1 X98.404 Y111.590 E0.00200 ; infill
;WIDTH:0.279484
G1 X98.609 Y111.554 E0.00409 ; infill
G1 X98.867 Y111.479 E0.00529 ; infill
;WIDTH:0.293849
G1 X98.953 Y111.462 E0.00182 ; infill
;WIDTH:0.318894
G1 X99.155 Y111.427 E0.00471 ; infill
;WIDTH:0.330466
G1 X99.485 Y111.385 E0.00795 ; infill
;WIDTH:0.356199
G1 X99.674 Y111.351 E0.00499 ; infill
;WIDTH:0.381933
G1 X100.028 Y111.275 E0.01021 ; infill
G1 X101.087 Y111.509 F10800.000 ; move to first infill point
;WIDTH:0.29127
G1 F2400.000
G1 X101.775 Y111.985 E0.01727 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.087 Y111.509 E-0.22070 ; wipe and retract
;WIPE_END
G1 E-2.17930 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X100.504 Y109.853 ; move to first infill point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.329104
G1 F2400.000
G1 X100.314 Y109.657 E0.00648 ; infill
;WIDTH:0.31697
G1 X100.049 Y109.442 E0.00778 ; infill
G1 X99.892 Y109.268 E0.00535 ; infill
;WIDTH:0.410243
G1 X99.811 Y109.169 E0.00392 ; infill
G1 X99.715 Y109.196 E0.00306 ; infill
;WIDTH:0.40271
G1 X99.619 Y109.224 E0.00300 ; infill
G1 X99.761 Y109.403 F10800.000 ; move to first infill point
;WIDTH:0.161459
G1 F2400.000
G1 X99.748 Y108.768 E0.00626 ; infill
G1 X99.761 Y108.716 E0.00053 ; infill
G1 X99.864 Y108.544 E0.00198 ; infill
;WIDTH:0.193805
G1 X99.972 Y108.366 E0.00261 ; infill
;WIDTH:0.233535
G1 X100.047 Y108.226 E0.00251 ; infill
;WIDTH:0.273263
G1 X100.122 Y108.087 E0.00304 ; infill
;WIDTH:0.305347
G1 X100.159 Y108.035 E0.00138 ; infill
;WIDTH:0.318142
G1 X100.644 Y107.512 E0.01632 ; infill
G1 X100.694 Y107.487 F10800.000 ; move to first infill point
;WIDTH:0.431449
G1 F2400.000
G1 X100.470 Y107.816 E0.01287 ; infill
G1 X100.316 Y107.914 E0.00588 ; infill
;WIDTH:0.388683
G1 X100.001 Y108.080 E0.01024 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.316 Y107.914 E-0.09398 ; wipe and retract
;WIPE_END
G1 E-2.30602 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X101.441 Y105.348 ; move to first infill point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.280799
G1 F2400.000
G1 X101.561 Y105.150 E0.00459 ; infill
;WIDTH:0.313682
G1 X101.673 Y104.927 E0.00562 ; infill
G1 X101.690 Y104.764 E0.00369 ; infill
G1 X101.665 Y104.520 E0.00551 ; infill
G1 X101.912 Y103.556 F10800.000 ; move to first infill point
;WIDTH:0.435818
G1 F2400.000
G1 X101.886 Y102.956 E0.01964 ; infill
G1 X101.824 Y102.658 E0.00992 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.886 Y102.956 E-0.08011 ; wipe and retract
G1 X101.912 Y103.556 E-0.15864 ; wipe and retract
;WIPE_END
G1 E-2.16125 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X103.075 Y98.939 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.059 Y98.918 E0.00088 ; perimeter
G1 X103.177 Y98.848 E0.00464 ; perimeter
G1 X103.128 Y98.910 E0.00269 ; perimeter
G1 X101.711 Y98.574 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X101.549 Y98.560 E0.00551 ; perimeter
G1 X101.574 Y98.492 E0.00247 ; perimeter
G1 X101.656 Y98.552 E0.00346 ; perimeter
G1 X102.943 Y98.425 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.434 Y98.130 E0.02655 ; perimeter
G1 X103.622 Y97.921 E0.01300 ; perimeter
G1 X103.818 Y97.804 E0.01055 ; perimeter
G1 X103.888 Y97.725 E0.00491 ; perimeter
G1 X104.077 Y97.643 E0.00952 ; perimeter
G1 X104.299 Y97.666 E0.01038 ; perimeter
G1 X104.473 Y97.814 E0.01056 ; perimeter
G1 X104.534 Y97.953 E0.00704 ; perimeter
G1 X104.344 Y98.273 E0.01723 ; perimeter
G1 X104.211 Y98.403 E0.00861 ; perimeter
G1 X103.713 Y99.006 E0.03622 ; perimeter
G1 X103.585 Y99.104 E0.00747 ; perimeter
G1 X103.477 Y99.270 E0.00921 ; perimeter
G1 X103.361 Y99.333 E0.00608 ; perimeter
G1 X103.274 Y99.462 E0.00723 ; perimeter
G1 X103.095 Y99.511 E0.00858 ; perimeter
G1 X102.859 Y99.434 E0.01152 ; perimeter
G1 X102.750 Y99.306 E0.00776 ; perimeter
G1 X102.414 Y99.206 E0.01623 ; perimeter
G1 X102.304 Y99.146 E0.00582 ; perimeter
G1 X101.955 Y99.079 E0.01646 ; perimeter
G1 X101.574 Y99.046 E0.01769 ; perimeter
G1 X101.224 Y99.313 E0.02039 ; perimeter
G1 X101.013 Y99.397 E0.01054 ; perimeter
G1 X100.909 Y99.535 E0.00800 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.808 Y99.670 E0.00703 ; perimeter (bridge)
G1 X100.779 Y99.638 E0.00179 ; perimeter (bridge)
G1 X100.769 Y99.551 E0.00365 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.753 Y99.405 E0.00681 ; perimeter
G1 X100.794 Y99.132 E0.01278 ; perimeter
G1 X100.972 Y98.749 E0.01959 ; perimeter
G1 X101.162 Y98.209 E0.02648 ; perimeter
G1 X101.183 Y98.099 E0.00520 ; perimeter
G1 X101.295 Y97.902 E0.01048 ; perimeter
G1 X101.493 Y97.913 E0.00921 ; perimeter
G1 X101.733 Y98.005 E0.01187 ; perimeter
G1 X101.889 Y98.126 E0.00914 ; perimeter
G1 X102.336 Y98.298 E0.02221 ; perimeter
G1 X102.442 Y98.368 E0.00586 ; perimeter
G1 X102.884 Y98.418 E0.02061 ; perimeter
G1 X103.235 Y98.699 F10800.000 ; move inwards before travel
G1 X103.371 Y98.702 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.324151
G1 F2400.000
G1 X103.667 Y98.447 E0.00914 ; infill
G1 X103.937 Y98.160 E0.00921 ; infill
;WIDTH:0.2003
G1 X104.129 Y97.983 E0.00342 ; infill
G1 X104.236 Y97.929 E0.00157 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.129 Y97.983 E-0.03165 ; wipe and retract
G1 X103.937 Y98.160 E-0.06888 ; wipe and retract
;WIPE_END
G1 E-2.29946 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X101.335 Y98.784 ; move to first infill point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.21191
G1 F2400.000
G1 X101.116 Y99.074 E0.00511 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.335 Y98.784 E-0.09588 ; wipe and retract
;WIPE_END
G1 E-2.30412 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X106.105 Y98.593 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.149 Y98.554 E0.00269 ; perimeter
G1 X106.333 Y98.510 E0.00878 ; perimeter
G1 X106.595 Y98.568 E0.01240 ; perimeter
G1 X107.110 Y98.809 E0.02635 ; perimeter
G1 X107.698 Y99.008 E0.02878 ; perimeter
G1 X108.121 Y99.126 E0.02033 ; perimeter
G1 X108.368 Y99.158 E0.01153 ; perimeter
G1 X109.072 Y99.376 E0.03412 ; perimeter
G1 X109.222 Y99.440 E0.00754 ; perimeter
G1 X109.403 Y99.570 E0.01033 ; perimeter
G1 X109.549 Y99.639 E0.00748 ; perimeter
G1 X109.729 Y99.799 E0.01117 ; perimeter
G1 X110.286 Y100.126 E0.02992 ; perimeter
G1 X110.543 Y100.198 E0.01236 ; perimeter
G1 X110.792 Y100.308 E0.01260 ; perimeter
G1 X111.092 Y100.486 E0.01614 ; perimeter
G1 X111.319 Y100.692 E0.01419 ; perimeter
G1 X111.800 Y100.965 E0.02561 ; perimeter
G1 X112.411 Y101.091 E0.02890 ; perimeter
G1 X112.607 Y101.165 E0.00972 ; perimeter
G1 X112.910 Y101.218 E0.01423 ; perimeter
G1 X113.331 Y101.424 E0.02173 ; perimeter
G1 X113.448 Y101.504 E0.00656 ; perimeter
G1 X113.587 Y101.541 E0.00665 ; perimeter
G1 X113.937 Y101.806 E0.02035 ; perimeter
G1 X114.106 Y102.024 E0.01275 ; perimeter
G1 X114.262 Y102.406 E0.01913 ; perimeter
G1 X114.204 Y102.584 E0.00866 ; perimeter
G1 X114.393 Y102.762 E0.01204 ; perimeter
G1 X114.348 Y102.742 E0.00230 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.347 Y102.741 E0.00004 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.188 Y102.565 E0.01098 ; perimeter
G1 X113.855 Y102.593 E0.01549 ; perimeter
G1 X113.517 Y102.481 E0.01647 ; perimeter
G1 X112.804 Y102.072 E0.03807 ; perimeter
G1 X112.409 Y101.884 E0.02031 ; perimeter
G1 X112.034 Y101.793 E0.01785 ; perimeter
G1 X111.683 Y101.622 E0.01810 ; perimeter
G1 X111.290 Y101.361 E0.02184 ; perimeter
G1 X110.972 Y101.320 E0.01487 ; perimeter
G1 X110.770 Y101.194 E0.01103 ; perimeter
G1 X110.531 Y101.097 E0.01196 ; perimeter
G1 X109.937 Y100.661 E0.03414 ; perimeter
G1 X109.725 Y100.470 E0.01318 ; perimeter
G1 X109.468 Y100.400 E0.01235 ; perimeter
G1 X109.271 Y100.299 E0.01026 ; perimeter
G1 X108.764 Y100.150 E0.02448 ; perimeter
G1 X108.227 Y99.948 E0.02657 ; perimeter
G1 X107.512 Y99.759 E0.03425 ; perimeter
G1 X107.179 Y99.719 E0.01553 ; perimeter
G1 X106.760 Y99.626 E0.01990 ; perimeter
G1 X106.408 Y99.477 E0.01773 ; perimeter
G1 X106.215 Y99.294 E0.01231 ; perimeter
G1 X106.102 Y99.042 E0.01277 ; perimeter
G1 X106.060 Y98.759 E0.01326 ; perimeter
G1 X106.089 Y98.651 E0.00520 ; perimeter
G1 X106.163 Y98.595 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.149 Y98.554 E-0.02987 ; wipe and retract
G1 X106.333 Y98.510 E-0.05002 ; wipe and retract
G1 X106.595 Y98.568 E-0.07064 ; wipe and retract
G1 X107.110 Y98.809 E-0.15012 ; wipe and retract
G1 X107.698 Y99.008 E-0.16398 ; wipe and retract
G1 X108.121 Y99.126 E-0.11582 ; wipe and retract
G1 X108.368 Y99.158 E-0.06571 ; wipe and retract
G1 X109.072 Y99.376 E-0.19439 ; wipe and retract
G1 X109.222 Y99.440 E-0.04294 ; wipe and retract
G1 X109.403 Y99.570 E-0.05887 ; wipe and retract
G1 X109.549 Y99.639 E-0.04262 ; wipe and retract
G1 X109.729 Y99.799 E-0.06362 ; wipe and retract
G1 X110.286 Y100.126 E-0.17046 ; wipe and retract
G1 X110.543 Y100.198 E-0.07041 ; wipe and retract
G1 X110.792 Y100.308 E-0.07176 ; wipe and retract
G1 X111.092 Y100.486 E-0.09197 ; wipe and retract
G1 X111.319 Y100.692 E-0.08085 ; wipe and retract
G1 X111.800 Y100.965 E-0.14590 ; wipe and retract
G1 X112.411 Y101.091 E-0.16466 ; wipe and retract
G1 X112.607 Y101.165 E-0.05538 ; wipe and retract
G1 X112.910 Y101.218 E-0.08108 ; wipe and retract
G1 X113.331 Y101.424 E-0.12381 ; wipe and retract
G1 X113.448 Y101.504 E-0.03735 ; wipe and retract
G1 X113.587 Y101.541 E-0.03789 ; wipe and retract
G1 X113.889 Y101.770 E-0.09987 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X115.123 Y104.091 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.724 Y103.550 E0.03112 ; perimeter
G1 X114.616 Y103.328 E0.01147 ; perimeter
G1 X114.608 Y103.153 E0.00810 ; perimeter
G1 X114.540 Y103.049 E0.00575 ; perimeter
G1 X114.535 Y102.844 E0.00953 ; perimeter
G1 X114.805 Y102.919 E0.01296 ; perimeter
G1 X115.147 Y102.955 E0.01595 ; perimeter
G1 X115.245 Y102.984 E0.00469 ; perimeter
G1 X115.356 Y103.055 E0.00611 ; perimeter
G1 X115.492 Y103.234 E0.01041 ; perimeter
G1 X115.523 Y103.333 E0.00483 ; perimeter
G1 X115.541 Y103.593 E0.01205 ; perimeter
G1 X115.615 Y104.064 E0.02211 ; perimeter
G1 X115.780 Y104.383 E0.01661 ; perimeter
G1 X115.844 Y104.589 E0.00999 ; perimeter
G1 X115.858 Y104.966 E0.01750 ; perimeter
G1 X115.750 Y105.256 E0.01432 ; perimeter
G1 X115.682 Y105.318 E0.00427 ; perimeter
G1 X115.512 Y105.395 E0.00865 ; perimeter
G1 X115.451 Y105.386 E0.00284 ; perimeter
G1 X115.300 Y105.271 E0.00881 ; perimeter
G1 X115.182 Y105.044 E0.01182 ; perimeter
G1 X115.139 Y104.745 E0.01399 ; perimeter
G1 X115.155 Y104.418 E0.01519 ; perimeter
G1 X115.129 Y104.151 E0.01243 ; perimeter
G1 X115.354 Y103.764 F10800.000 ; move inwards before travel
G1 X115.400 Y104.221 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.128177
G1 F2400.000
G1 X115.427 Y104.314 E0.00068 ; infill
;WIDTH:0.16344
G1 X115.599 Y104.969 E0.00679 ; infill
G1 X115.386 Y104.634 F10800.000 ; move to first infill point
;WIDTH:0.114708
G1 F2400.000
G1 X115.527 Y105.124 E0.00304 ; infill
G1 X115.489 Y105.112 F10800.000 ; move to first infill point
;WIDTH:0.249881
G1 F2400.000
G1 X115.511 Y104.910 E0.00349 ; infill
G1 X115.446 Y104.262 E0.01122 ; infill
G1 X115.323 Y103.933 F10800.000 ; move to first infill point
;WIDTH:0.240752
G1 F2400.000
G1 X115.029 Y103.185 E0.01321 ; infill
G1 X113.939 Y102.344 F10800.000 ; move to first infill point
;WIDTH:0.362087
G1 F2400.000
G1 X113.658 Y102.100 E0.00990 ; infill
G1 X113.380 Y101.919 E0.00879 ; infill
G1 X112.988 Y101.709 E0.01181 ; infill
G1 X112.665 Y101.572 E0.00930 ; infill
;WIDTH:0.343827
G1 X112.547 Y101.535 E0.00309 ; infill
;WIDTH:0.310516
G1 X112.009 Y101.378 E0.01248 ; infill
;WIDTH:0.284755
G1 X111.853 Y101.325 E0.00331 ; infill
;WIDTH:0.243914
G1 X111.776 Y101.293 E0.00139 ; infill
;WIDTH:0.212172
G1 X111.699 Y101.261 E0.00117 ; infill
;WIDTH:0.180432
G1 X111.407 Y101.083 E0.00391 ; infill
;WIDTH:0.157377
G1 X111.209 Y101.014 E0.00200 ; infill
;WIDTH:0.264935
G1 X111.095 Y100.974 E0.00223 ; infill
G1 X110.915 Y100.840 E0.00414 ; infill
G1 X110.856 Y100.806 F10800.000 ; move to first infill point
;WIDTH:0.370935
G1 F2400.000
G1 X110.610 Y100.662 E0.00778 ; infill
;WIDTH:0.35542
G1 X110.417 Y100.550 E0.00579 ; infill
;WIDTH:0.30682
G1 X110.293 Y100.490 E0.00303 ; infill
;WIDTH:0.257721
G1 X110.169 Y100.429 E0.00246 ; infill
;WIDTH:0.208622
G1 X110.007 Y100.315 E0.00273 ; infill
;WIDTH:0.169174
G1 X109.875 Y100.218 E0.00172 ; infill
;WIDTH:0.136607
G1 X109.528 Y100.061 E0.00296 ; infill
;WIDTH:0.255661
G1 X109.347 Y99.944 E0.00383 ; infill
G1 X109.111 Y99.843 E0.00453 ; infill
;WIDTH:0.379351
G1 X108.356 Y99.571 E0.02245 ; infill
;WIDTH:0.356573
G1 X108.054 Y99.504 E0.00807 ; infill
;WIDTH:0.329611
G1 X107.250 Y99.302 E0.01975 ; infill
;WIDTH:0.43779
G1 X106.896 Y99.200 E0.01210 ; infill
G1 X106.658 Y99.094 E0.00856 ; infill
G1 X106.319 Y98.863 E0.01348 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.658 Y99.094 E-0.10835 ; wipe and retract
G1 X106.896 Y99.200 E-0.06878 ; wipe and retract
G1 X107.250 Y99.302 E-0.09727 ; wipe and retract
;WIPE_END
G1 E-2.12559 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X115.666 Y107.685 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.518 Y107.741 E0.00732 ; perimeter
G1 X115.411 Y107.716 E0.00509 ; perimeter
G1 X115.258 Y107.584 E0.00936 ; perimeter
G1 X115.170 Y107.418 E0.00873 ; perimeter
G1 X115.112 Y107.184 E0.01115 ; perimeter
G1 X115.106 Y107.105 E0.00364 ; perimeter
G1 X115.173 Y106.786 E0.01512 ; perimeter
G1 X115.287 Y106.577 E0.01105 ; perimeter
G1 X115.503 Y106.417 E0.01242 ; perimeter
G1 X115.573 Y106.422 E0.00326 ; perimeter
G1 X115.658 Y106.480 E0.00476 ; perimeter
G1 X115.790 Y106.628 E0.00921 ; perimeter
G1 X115.883 Y106.832 E0.01038 ; perimeter
G1 X115.911 Y107.089 E0.01195 ; perimeter
G1 X115.881 Y107.347 E0.01201 ; perimeter
G1 X115.818 Y107.511 E0.00815 ; perimeter
G1 X115.705 Y107.640 E0.00793 ; perimeter
G1 X115.525 Y107.613 F10800.000 ; move inwards before travel
G1 X115.512 Y106.710 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.191981
G1 F2400.000
G1 X115.593 Y107.402 E0.00864 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.512 Y106.710 E-0.18400 ; wipe and retract
;WIPE_END
G1 E-2.21600 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X115.825 Y110.259 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.878 Y110.448 E0.00909 ; perimeter
G1 X115.862 Y110.693 E0.01136 ; perimeter
G1 X115.776 Y110.859 E0.00866 ; perimeter
G1 X115.664 Y110.943 E0.00648 ; perimeter
G1 X115.556 Y110.971 E0.00516 ; perimeter
G1 X115.367 Y110.944 E0.00885 ; perimeter
G1 X115.294 Y110.904 E0.00387 ; perimeter
G1 X115.235 Y110.828 E0.00445 ; perimeter
G1 X115.177 Y110.665 E0.00800 ; perimeter
G1 X115.168 Y110.401 E0.01225 ; perimeter
G1 X115.231 Y110.241 E0.00798 ; perimeter
G1 X115.326 Y110.134 E0.00660 ; perimeter
G1 X115.408 Y110.095 E0.00423 ; perimeter
G1 X115.545 Y110.083 E0.00635 ; perimeter
G1 X115.700 Y110.126 E0.00747 ; perimeter
G1 X115.787 Y110.214 E0.00571 ; perimeter
G1 X115.726 Y110.428 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.878 Y110.448 E-0.06637 ; wipe and retract
G1 X115.862 Y110.693 E-0.06474 ; wipe and retract
G1 X115.776 Y110.859 E-0.04933 ; wipe and retract
G1 X115.664 Y110.943 E-0.03694 ; wipe and retract
G1 X115.556 Y110.971 E-0.02941 ; wipe and retract
G1 X115.367 Y110.944 E-0.05042 ; wipe and retract
G1 X115.294 Y110.904 E-0.02204 ; wipe and retract
G1 X115.235 Y110.828 E-0.02534 ; wipe and retract
G1 X115.177 Y110.665 E-0.04559 ; wipe and retract
G1 X115.168 Y110.401 E-0.06976 ; wipe and retract
G1 X115.231 Y110.241 E-0.04548 ; wipe and retract
G1 X115.326 Y110.134 E-0.03762 ; wipe and retract
G1 X115.408 Y110.095 E-0.02407 ; wipe and retract
G1 X115.545 Y110.083 E-0.03618 ; wipe and retract
G1 X115.700 Y110.126 E-0.04256 ; wipe and retract
G1 X115.787 Y110.214 E-0.03255 ; wipe and retract
;WIPE_END
G1 E-1.72161 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X115.365 Y114.917 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.444 Y114.973 E0.00448 ; perimeter
G1 X115.501 Y115.054 E0.00460 ; perimeter
G1 X115.536 Y115.140 E0.00429 ; perimeter
G1 X115.552 Y115.274 E0.00624 ; perimeter
G1 X115.514 Y115.420 E0.00699 ; perimeter
G1 X115.372 Y115.612 E0.01108 ; perimeter
G1 X115.204 Y115.752 E0.01009 ; perimeter
G1 X115.109 Y115.792 E0.00481 ; perimeter
G1 X114.902 Y115.821 E0.00967 ; perimeter
G1 X114.704 Y115.784 E0.00931 ; perimeter
G1 X114.658 Y115.758 E0.00248 ; perimeter
G1 X114.568 Y115.664 E0.00602 ; perimeter
G1 X114.512 Y115.490 E0.00845 ; perimeter
G1 X114.510 Y115.359 E0.00609 ; perimeter
G1 X114.587 Y115.187 E0.00872 ; perimeter
G1 X114.750 Y115.015 E0.01096 ; perimeter
G1 X114.958 Y114.890 E0.01125 ; perimeter
G1 X115.067 Y114.865 E0.00516 ; perimeter
G1 X115.210 Y114.865 E0.00665 ; perimeter
G1 X115.308 Y114.899 E0.00477 ; perimeter
G1 X115.370 Y115.014 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.444 Y114.973 E-0.04088 ; wipe and retract
G1 X115.501 Y115.054 E-0.02621 ; wipe and retract
G1 X115.536 Y115.140 E-0.02445 ; wipe and retract
G1 X115.552 Y115.274 E-0.03553 ; wipe and retract
G1 X115.514 Y115.420 E-0.03982 ; wipe and retract
G1 X115.372 Y115.612 E-0.06315 ; wipe and retract
G1 X115.204 Y115.752 E-0.05746 ; wipe and retract
G1 X115.109 Y115.792 E-0.02741 ; wipe and retract
G1 X114.902 Y115.821 E-0.05511 ; wipe and retract
G1 X114.704 Y115.784 E-0.05306 ; wipe and retract
G1 X114.658 Y115.758 E-0.01413 ; wipe and retract
G1 X114.568 Y115.664 E-0.03430 ; wipe and retract
G1 X114.512 Y115.490 E-0.04815 ; wipe and retract
G1 X114.510 Y115.359 E-0.03468 ; wipe and retract
G1 X114.587 Y115.187 E-0.04969 ; wipe and retract
G1 X114.750 Y115.015 E-0.06244 ; wipe and retract
G1 X114.958 Y114.890 E-0.06410 ; wipe and retract
G1 X115.067 Y114.865 E-0.02941 ; wipe and retract
G1 X115.210 Y114.865 E-0.03790 ; wipe and retract
G1 X115.308 Y114.899 E-0.02718 ; wipe and retract
;WIPE_END
G1 E-1.57494 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 X112.925 Y115.528 ; move to first perimeter point
G1 Z9.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.995 Y115.634 E0.00590 ; perimeter
G1 X112.999 Y115.777 E0.00661 ; perimeter
G1 X112.983 Y115.838 E0.00294 ; perimeter
G1 X112.909 Y115.955 E0.00640 ; perimeter
G1 X112.818 Y116.025 E0.00531 ; perimeter
G1 X112.634 Y116.106 E0.00934 ; perimeter
G1 X112.162 Y116.172 E0.02208 ; perimeter
G1 X111.770 Y116.165 E0.01814 ; perimeter
G1 X111.407 Y116.099 E0.01711 ; perimeter
G1 X111.151 Y115.966 E0.01334 ; perimeter
G1 X110.938 Y115.894 E0.01041 ; perimeter
G1 X110.830 Y115.819 E0.00611 ; perimeter
G1 X110.796 Y115.758 E0.00322 ; perimeter
G1 X110.907 Y115.658 E0.00691 ; perimeter
G1 X111.349 Y115.511 E0.02158 ; perimeter
G1 X111.546 Y115.409 E0.01028 ; perimeter
G1 X111.718 Y115.361 E0.00828 ; perimeter
G1 X112.020 Y115.332 E0.01403 ; perimeter
G1 X112.483 Y115.354 E0.02149 ; perimeter
G1 X112.726 Y115.419 E0.01162 ; perimeter
G1 X112.872 Y115.499 E0.00774 ; perimeter
G1 X112.892 Y115.651 F10800.000 ; move inwards before travel
G1 X112.757 Y115.728 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.384648
G1 F2400.000
G1 X111.810 Y115.760 E0.02691 ; infill
;WIDTH:0.372952
G1 X111.417 Y115.743 E0.01081 ; infill
;LAYER_CHANGE
;Z:9.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;9.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.810 Y115.760 E-0.10391 ; wipe and retract
;WIPE_END
G1 E-2.29609 F2400.000 ; retract
G1 Z9.275 F10800.000 ; lift Z
G1 Z9.400 ; move to next layer (46)
;AFTER_LAYER_CHANGE
;9.4
G1 Z9.475 ; lift Z
G1 X101.516 Y107.444 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.050 Y107.563 E0.01630 ; perimeter
G1 X101.139 Y107.284 E0.00992 ; perimeter
G1 X101.326 Y106.932 E0.01348 ; perimeter
G1 X101.385 Y106.566 E0.01255 ; perimeter
G1 X101.654 Y105.974 E0.02202 ; perimeter
G1 X101.715 Y105.661 E0.01077 ; perimeter
G1 X101.724 Y105.726 E0.00221 ; perimeter
G1 X101.924 Y106.153 E0.01594 ; perimeter
G1 X101.703 Y106.422 E0.01179 ; perimeter
G1 X101.431 Y106.938 E0.01974 ; perimeter
G1 X101.506 Y107.385 E0.01533 ; perimeter
G1 X101.934 Y107.018 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.992 Y107.363 E0.01616 ; perimeter
G1 X102.033 Y107.469 E0.00531 ; perimeter
G1 X102.043 Y107.609 E0.00647 ; perimeter
G1 X102.035 Y107.702 E0.00434 ; perimeter
G1 X101.966 Y107.791 E0.00521 ; perimeter
G1 X101.707 Y107.907 E0.01313 ; perimeter
G1 X101.618 Y107.915 E0.00413 ; perimeter
G1 X100.782 Y108.128 E0.03997 ; perimeter
G1 X100.244 Y108.191 E0.02509 ; perimeter
G1 X100.127 Y108.320 E0.00805 ; perimeter
G1 X99.854 Y108.527 E0.01590 ; perimeter
G1 X99.972 Y108.056 E0.02250 ; perimeter
G1 X100.243 Y107.574 E0.02561 ; perimeter
G1 X100.465 Y107.371 E0.01396 ; perimeter
G1 X100.630 Y107.292 E0.00847 ; perimeter
G1 X100.693 Y107.095 E0.00958 ; perimeter
G1 X100.863 Y106.776 E0.01674 ; perimeter
G1 X100.920 Y106.426 E0.01645 ; perimeter
G1 X101.192 Y105.826 E0.03050 ; perimeter
G1 X101.274 Y105.405 E0.01985 ; perimeter
G1 X101.240 Y105.036 E0.01717 ; perimeter
G1 X101.300 Y104.879 E0.00779 ; perimeter
G1 X101.313 Y104.720 E0.00737 ; perimeter
G1 X101.413 Y104.371 E0.01680 ; perimeter
G1 X101.419 Y104.263 E0.00501 ; perimeter
G1 X101.487 Y104.014 E0.01197 ; perimeter
G1 X101.510 Y103.764 E0.01163 ; perimeter
G1 X101.324 Y102.589 E0.05510 ; perimeter
G1 X101.373 Y102.301 E0.01353 ; perimeter
G1 X101.495 Y102.177 E0.00804 ; perimeter
G1 X101.714 Y102.188 E0.01019 ; perimeter
G1 X102.068 Y102.468 E0.02089 ; perimeter
G1 X102.219 Y102.690 E0.01243 ; perimeter
G1 X102.288 Y103.101 E0.01930 ; perimeter
G1 X102.217 Y103.659 E0.02605 ; perimeter
G1 X102.132 Y103.933 E0.01329 ; perimeter
G1 X102.124 Y104.175 E0.01123 ; perimeter
G1 X102.082 Y104.459 E0.01330 ; perimeter
G1 X102.137 Y105.204 E0.03461 ; perimeter
G1 X102.192 Y105.591 E0.01808 ; perimeter
G1 X102.315 Y105.866 E0.01397 ; perimeter
G1 X102.363 Y105.932 E0.00376 ; perimeter
G1 X102.424 Y106.189 E0.01227 ; perimeter
G1 X102.351 Y106.392 E0.00996 ; perimeter
G1 X102.106 Y106.690 E0.01785 ; perimeter
G1 X101.962 Y106.965 E0.01443 ; perimeter
G1 X101.618 Y107.167 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.992 Y107.363 E-0.10513 ; wipe and retract
G1 X102.033 Y107.469 E-0.03026 ; wipe and retract
G1 X102.043 Y107.609 E-0.03687 ; wipe and retract
G1 X102.035 Y107.702 E-0.02470 ; wipe and retract
G1 X101.966 Y107.791 E-0.02968 ; wipe and retract
G1 X101.707 Y107.907 E-0.07481 ; wipe and retract
G1 X101.618 Y107.915 E-0.02356 ; wipe and retract
G1 X100.782 Y108.128 E-0.22768 ; wipe and retract
G1 X100.244 Y108.191 E-0.14291 ; wipe and retract
G1 X100.127 Y108.320 E-0.04585 ; wipe and retract
G1 X99.854 Y108.527 E-0.09061 ; wipe and retract
G1 X99.972 Y108.056 E-0.12817 ; wipe and retract
G1 X100.243 Y107.574 E-0.14589 ; wipe and retract
G1 X100.465 Y107.371 E-0.07952 ; wipe and retract
G1 X100.630 Y107.292 E-0.04827 ; wipe and retract
G1 X100.693 Y107.095 E-0.05456 ; wipe and retract
G1 X100.863 Y106.776 E-0.09535 ; wipe and retract
G1 X100.920 Y106.426 E-0.09374 ; wipe and retract
G1 X101.192 Y105.826 E-0.17376 ; wipe and retract
G1 X101.274 Y105.405 E-0.11310 ; wipe and retract
G1 X101.240 Y105.036 E-0.09781 ; wipe and retract
G1 X101.300 Y104.879 E-0.04440 ; wipe and retract
G1 X101.313 Y104.720 E-0.04200 ; wipe and retract
G1 X101.413 Y104.371 E-0.09570 ; wipe and retract
G1 X101.419 Y104.263 E-0.02856 ; wipe and retract
G1 X101.487 Y104.014 E-0.06818 ; wipe and retract
G1 X101.510 Y103.764 E-0.06628 ; wipe and retract
G1 X101.467 Y103.492 E-0.07266 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X101.279 Y110.085 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.374 Y110.106 E0.00328 ; perimeter
G1 X100.985 Y110.536 E0.01963 ; perimeter
G1 X100.968 Y111.374 E0.02837 ; perimeter
G1 X100.866 Y111.311 E0.00405 ; perimeter
G1 X100.560 Y111.289 E0.01038 ; perimeter
G1 X100.322 Y111.225 E0.00833 ; perimeter
G1 X100.942 Y110.699 E0.02752 ; perimeter
G1 X100.747 Y110.007 E0.02431 ; perimeter
G1 X101.143 Y110.097 E0.01375 ; perimeter
G1 X101.219 Y110.090 E0.00259 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.374 Y110.106 E-0.04100 ; wipe and retract
G1 X100.985 Y110.536 E-0.15307 ; wipe and retract
G1 X100.968 Y111.374 E-0.22121 ; wipe and retract
G1 X100.866 Y111.311 E-0.03159 ; wipe and retract
G1 X100.560 Y111.289 E-0.08094 ; wipe and retract
G1 X100.322 Y111.225 E-0.06497 ; wipe and retract
G1 X100.942 Y110.699 E-0.21458 ; wipe and retract
G1 X100.747 Y110.007 E-0.18956 ; wipe and retract
G1 X101.143 Y110.097 E-0.10721 ; wipe and retract
G1 X101.219 Y110.090 E-0.02021 ; wipe and retract
;WIPE_END
G1 E-1.27565 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X102.070 Y112.217 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.130 Y112.252 E0.00236 ; perimeter
G1 X102.546 Y112.294 E0.01416 ; perimeter
G1 X102.507 Y112.313 E0.00147 ; perimeter
G1 X102.085 Y112.763 E0.02088 ; perimeter
G1 X102.082 Y112.271 E0.01665 ; perimeter
G1 X101.794 Y113.631 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X102.117 Y114.011 E0.01688 ; perimeter
G1 X101.888 Y113.892 E0.00875 ; perimeter
G1 X101.641 Y113.842 E0.00851 ; perimeter
G1 X101.759 Y113.680 E0.00676 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.117 Y114.011 E-0.12878 ; wipe and retract
G1 X101.888 Y113.892 E-0.06824 ; wipe and retract
G1 X101.641 Y113.842 E-0.06638 ; wipe and retract
G1 X101.759 Y113.680 E-0.05270 ; wipe and retract
;WIPE_END
G1 E-2.08391 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X104.250 Y114.870 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.308 Y114.878 E0.00201 ; perimeter
G1 X104.574 Y114.746 E0.01003 ; perimeter
G1 X104.684 Y114.744 E0.00372 ; perimeter
G1 X104.806 Y114.672 E0.00479 ; perimeter
G1 X104.778 Y114.902 E0.00783 ; perimeter
G1 X104.860 Y114.994 E0.00416 ; perimeter
G1 X104.567 Y114.978 E0.00993 ; perimeter
G1 X104.306 Y114.889 E0.00933 ; perimeter
G1 X105.283 Y114.744 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.397 Y114.872 E0.00797 ; perimeter
G1 X105.443 Y115.054 E0.00869 ; perimeter
G1 X105.510 Y115.124 E0.00451 ; perimeter
G1 X105.531 Y115.234 E0.00515 ; perimeter
G1 X105.483 Y115.330 E0.00502 ; perimeter
G1 X105.282 Y115.446 E0.01072 ; perimeter
G1 X105.032 Y115.486 E0.01175 ; perimeter
G1 X104.475 Y115.456 E0.02585 ; perimeter
G1 X103.292 Y115.052 E0.05789 ; perimeter
G1 X102.661 Y114.793 E0.03160 ; perimeter
G1 X102.554 Y114.718 E0.00603 ; perimeter
G1 X102.114 Y114.552 E0.02178 ; perimeter
G1 X101.726 Y114.351 E0.02025 ; perimeter
G1 X101.426 Y114.290 E0.01418 ; perimeter
G1 X101.034 Y114.338 E0.01829 ; perimeter
G1 X100.876 Y114.293 E0.00759 ; perimeter
G1 X100.285 Y114.417 E0.02800 ; perimeter
G1 X99.771 Y114.448 E0.02383 ; perimeter
G1 X99.933 Y114.408 E0.00773 ; perimeter
G1 X100.551 Y114.035 E0.03342 ; perimeter
G1 X100.717 Y113.965 E0.00834 ; perimeter
G1 X101.174 Y113.665 E0.02531 ; perimeter
G1 X101.445 Y113.291 E0.02143 ; perimeter
G1 X101.604 Y112.924 E0.01852 ; perimeter
G1 X101.601 Y112.440 E0.02239 ; perimeter
G1 X101.246 Y112.114 E0.02233 ; perimeter
G1 X100.713 Y111.784 E0.02905 ; perimeter
G1 X100.479 Y111.767 E0.01086 ; perimeter
G1 X100.125 Y111.671 E0.01698 ; perimeter
G1 X99.911 Y111.694 E0.00996 ; perimeter
G1 X99.782 Y111.674 E0.00608 ; perimeter
G1 X99.410 Y111.681 E0.01722 ; perimeter
G1 X99.110 Y111.714 E0.01396 ; perimeter
G1 X98.473 Y111.740 E0.02957 ; perimeter
G1 X98.116 Y111.978 E0.01984 ; perimeter
G1 X98.155 Y111.738 E0.01125 ; perimeter
G1 X98.318 Y111.522 E0.01254 ; perimeter
G1 X98.628 Y111.332 E0.01684 ; perimeter
G1 X98.933 Y111.202 E0.01536 ; perimeter
G1 X99.962 Y110.899 E0.04968 ; perimeter
G1 X100.394 Y110.532 E0.02627 ; perimeter
G1 X100.295 Y110.181 E0.01686 ; perimeter
G1 X100.164 Y109.999 E0.01040 ; perimeter
G1 X100.153 Y109.934 E0.00307 ; perimeter
G1 X99.830 Y109.567 E0.02265 ; perimeter
G1 X99.756 Y109.394 E0.00872 ; perimeter
G1 X99.745 Y109.182 E0.00985 ; perimeter
G1 X99.836 Y108.961 E0.01106 ; perimeter
G1 X100.099 Y109.258 E0.01840 ; perimeter
G1 X100.516 Y109.399 E0.02037 ; perimeter
G1 X100.589 Y109.455 E0.00425 ; perimeter
G1 X101.176 Y109.610 E0.02815 ; perimeter
G1 X101.310 Y109.599 E0.00623 ; perimeter
G1 X101.667 Y109.676 E0.01694 ; perimeter
G1 X101.949 Y109.653 E0.01308 ; perimeter
G1 X102.248 Y109.709 E0.01412 ; perimeter
G1 X102.404 Y109.780 E0.00790 ; perimeter
G1 X102.431 Y109.836 E0.00289 ; perimeter
G1 X102.371 Y109.978 E0.00713 ; perimeter
G1 X102.049 Y110.257 E0.01972 ; perimeter
G1 X101.779 Y110.377 E0.01372 ; perimeter
G1 X101.463 Y110.726 E0.02178 ; perimeter
G1 X101.453 Y111.235 E0.02357 ; perimeter
G1 X101.759 Y111.479 E0.01813 ; perimeter
G1 X102.282 Y111.783 E0.02803 ; perimeter
G1 X102.862 Y111.842 E0.02701 ; perimeter
G1 X103.802 Y111.527 E0.04590 ; perimeter
G1 X103.949 Y111.454 E0.00762 ; perimeter
G1 X104.311 Y111.353 E0.01738 ; perimeter
G1 X104.401 Y111.345 E0.00422 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.517 Y111.335 E0.00488 ; perimeter (bridge)
G1 X104.666 Y111.277 E0.00664 ; perimeter (bridge)
G1 X104.728 Y111.352 E0.00408 ; perimeter (bridge)
G1 X104.766 Y111.492 E0.00605 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.767 Y111.499 E0.00032 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.815 Y111.676 E0.00767 ; perimeter (bridge)
G1 X104.787 Y111.685 E0.00121 ; perimeter (bridge)
G1 X104.654 Y111.852 E0.00890 ; perimeter (bridge)
G1 X104.546 Y111.875 E0.00463 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.191 Y111.950 E0.01680 ; perimeter
G1 X104.062 Y112.028 E0.00698 ; perimeter
G1 X103.195 Y112.412 E0.04391 ; perimeter
G1 X102.907 Y112.654 E0.01743 ; perimeter
G1 X102.798 Y112.708 E0.00561 ; perimeter
G1 X102.451 Y113.078 E0.02354 ; perimeter
G1 X102.450 Y113.183 E0.00486 ; perimeter
G1 X102.300 Y113.482 E0.01549 ; perimeter
G1 X102.692 Y113.942 E0.02799 ; perimeter
G1 X103.040 Y114.124 E0.01819 ; perimeter
G1 X103.264 Y114.181 E0.01070 ; perimeter
G1 X103.788 Y114.376 E0.02591 ; perimeter
G1 X104.045 Y114.354 E0.01194 ; perimeter
G1 X104.228 Y114.380 E0.00856 ; perimeter
G1 X104.456 Y114.266 E0.01182 ; perimeter
G1 X104.549 Y114.264 E0.00429 ; perimeter
G1 X105.042 Y113.975 E0.02646 ; perimeter
G1 X105.279 Y113.889 E0.01170 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.318 Y113.878 E0.00169 ; perimeter (bridge)
G1 X105.363 Y113.993 E0.00515 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.349 Y114.085 E0.00433 ; perimeter
G1 X105.243 Y114.333 E0.01247 ; perimeter
G1 X105.313 Y114.499 E0.00834 ; perimeter
G1 X105.290 Y114.684 E0.00862 ; perimeter
G1 X105.196 Y114.892 F10800.000 ; move inwards before travel
G1 X104.008 Y114.842 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.373301
G1 F2400.000
G1 X103.700 Y114.769 E0.00871 ; infill
G1 X103.145 Y114.561 E0.01626 ; infill
;WIDTH:0.357082
G1 X102.919 Y114.487 E0.00623 ; infill
;WIDTH:0.323219
G1 X102.744 Y114.393 E0.00462 ; infill
;WIDTH:0.312106
G1 X102.435 Y114.249 E0.00764 ; infill
G1 X102.423 Y114.014 E0.00527 ; infill
G1 X101.938 Y113.429 F10800.000 ; move to first infill point
;WIDTH:0.187309
G1 F2400.000
G1 X102.210 Y113.038 E0.00572 ; infill
G1 X101.254 Y113.928 F10800.000 ; move to first infill point
;WIDTH:0.115368
G1 F2400.000
G1 X101.173 Y114.021 E0.00074 ; infill
G1 X101.295 Y114.040 E0.00074 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.173 Y114.021 E-0.03247 ; wipe and retract
G1 X101.254 Y113.928 E-0.03257 ; wipe and retract
;WIPE_END
G1 E-2.33496 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X104.546 Y111.601 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.1185
G1 F2400.000
G1 X104.095 Y111.694 E0.00289 ; infill
;WIDTH:0.102592
G1 X103.906 Y111.789 E0.00105 ; infill
G1 X103.469 Y111.959 E0.00233 ; infill
;WIDTH:0.21146
G1 X103.032 Y112.128 E0.00657 ; infill
G1 X102.891 Y112.202 E0.00223 ; infill
G1 X102.753 Y112.081 E0.00257 ; infill
G1 X101.876 Y112.074 F10800.000 ; move to first infill point
;WIDTH:0.430166
G1 F2400.000
G1 X101.537 Y111.825 E0.01352 ; infill
;WIDTH:0.380829
G1 X101.204 Y111.584 E0.01154 ; infill
G1 X99.714 Y111.331 F10800.000 ; move to first infill point
;WIDTH:0.249338
G1 F2400.000
G1 X99.554 Y111.356 E0.00279 ; infill
;WIDTH:0.206234
G1 X99.393 Y111.381 E0.00221 ; infill
;WIDTH:0.163131
G1 X99.239 Y111.411 E0.00157 ; infill
;WIDTH:0.135063
G1 X99.090 Y111.441 E0.00116 ; infill
;WIDTH:0.108177
G1 X99.018 Y111.453 E0.00039 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.090 Y111.441 E-0.01918 ; wipe and retract
;WIPE_END
G1 E-2.38082 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X100.323 Y109.588 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.114124
G1 F2400.000
G1 X100.460 Y109.959 E0.00234 ; infill
G1 X100.450 Y109.964 F10800.000 ; move to first infill point
;WIDTH:0.0969632
G1 F2400.000
G1 X100.335 Y109.667 E0.00143 ; infill
G1 X100.381 Y109.650 E0.00022 ; infill
G1 X100.435 Y109.668 E0.00025 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.381 Y109.650 E-0.01494 ; wipe and retract
G1 X100.335 Y109.667 E-0.01313 ; wipe and retract
G1 X100.450 Y109.964 E-0.08404 ; wipe and retract
;WIPE_END
G1 E-2.28790 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X101.843 Y103.742 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.225472
G1 F2400.000
G1 X101.840 Y103.765 E0.00035 ; infill
;WIDTH:0.217903
G1 X101.819 Y103.869 E0.00156 ; infill
;WIDTH:0.19582
G1 X101.730 Y104.569 E0.00897 ; infill
;WIDTH:0.318836
G1 X101.671 Y105.419 E0.01955 ; infill
G1 X101.918 Y105.425 F10800.000 ; move to first infill point
;WIDTH:0.397326
G1 F2400.000
G1 X101.698 Y105.222 E0.00883 ; infill
G1 X101.636 Y104.467 E0.02232 ; infill
G1 X101.866 Y104.275 F10800.000 ; move to first infill point
;WIDTH:0.34419
G1 F2400.000
G1 X101.860 Y103.885 E0.00977 ; infill
;WIDTH:0.391795
G1 X101.848 Y103.104 E0.02264 ; infill
G1 X101.814 Y102.880 E0.00658 ; infill
G1 X101.999 Y102.804 E0.00580 ; infill
G1 X101.875 Y102.623 F10800.000 ; move to first infill point
;WIDTH:0.359657
G1 F2400.000
G1 X101.750 Y102.726 E0.00427 ; infill
;WIDTH:0.369411
G1 X102.006 Y103.406 E0.01974 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.750 Y102.726 E-0.19191 ; wipe and retract
;WIPE_END
G1 E-2.20809 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X101.398 Y98.715 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.470 Y98.340 E0.01291 ; perimeter
G1 X101.583 Y98.496 E0.00652 ; perimeter
G1 X101.830 Y98.598 E0.00906 ; perimeter
G1 X101.573 Y98.592 E0.00873 ; perimeter
G1 X101.447 Y98.680 E0.00519 ; perimeter
G1 X101.720 Y99.078 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.180 Y99.457 E0.03058 ; perimeter
G1 X100.955 Y99.906 E0.02325 ; perimeter
G1 X100.856 Y100.227 E0.01554 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.820 Y100.344 E0.00511 ; perimeter (bridge)
G1 X100.756 Y100.305 E0.00311 ; perimeter (bridge)
G1 X100.668 Y100.169 E0.00675 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.558 Y100.000 E0.00937 ; perimeter
G1 X100.444 Y99.750 E0.01274 ; perimeter
G1 X100.475 Y99.469 E0.01310 ; perimeter
G1 X100.644 Y99.095 E0.01900 ; perimeter
G1 X100.921 Y98.641 E0.02462 ; perimeter
G1 X101.091 Y97.759 E0.04161 ; perimeter
G1 X101.157 Y97.636 E0.00647 ; perimeter
G1 X101.243 Y97.591 E0.00453 ; perimeter
G1 X101.320 Y97.598 E0.00356 ; perimeter
G1 X101.402 Y97.646 E0.00442 ; perimeter
G1 X101.518 Y97.773 E0.00796 ; perimeter
G1 X101.594 Y97.799 E0.00368 ; perimeter
G1 X101.786 Y97.954 E0.01146 ; perimeter
G1 X101.893 Y98.103 E0.00849 ; perimeter
G1 X102.147 Y98.208 E0.01272 ; perimeter
G1 X102.262 Y98.306 E0.00700 ; perimeter
G1 X102.524 Y98.441 E0.01366 ; perimeter
G1 X103.072 Y98.498 E0.02550 ; perimeter
G1 X103.240 Y98.279 E0.01280 ; perimeter
G1 X103.394 Y98.149 E0.00934 ; perimeter
G1 X103.883 Y97.530 E0.03655 ; perimeter
G1 X104.059 Y97.448 E0.00897 ; perimeter
G1 X104.120 Y97.385 E0.00409 ; perimeter
G1 X104.246 Y97.378 E0.00583 ; perimeter
G1 X104.328 Y97.414 E0.00414 ; perimeter
G1 X104.520 Y97.547 E0.01082 ; perimeter
G1 X104.928 Y97.881 E0.02445 ; perimeter
G1 X104.943 Y97.935 E0.00258 ; perimeter
G1 X104.882 Y97.947 E0.00287 ; perimeter
G1 X104.809 Y98.102 E0.00791 ; perimeter
G1 X104.494 Y98.250 E0.01613 ; perimeter
G1 X103.996 Y98.644 E0.02943 ; perimeter
G1 X103.884 Y98.775 E0.00797 ; perimeter
G1 X103.562 Y99.032 E0.01910 ; perimeter
G1 X103.297 Y99.175 E0.01394 ; perimeter
G1 X103.070 Y99.215 E0.01066 ; perimeter
G1 X102.904 Y99.163 E0.00806 ; perimeter
G1 X102.428 Y99.143 E0.02207 ; perimeter
G1 X102.243 Y99.091 E0.00890 ; perimeter
G1 X101.780 Y99.079 E0.02148 ; perimeter
G1 X101.406 Y98.830 F10800.000 ; move inwards before travel
G1 X102.065 Y98.656 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.239409
G1 F2400.000
G1 X102.485 Y98.792 E0.00721 ; infill
G1 X103.171 Y98.851 E0.01125 ; infill
G1 X103.760 Y98.549 E0.01083 ; infill
G1 X103.129 Y98.960 F10800.000 ; move to first infill point
;WIDTH:0.322231
G1 F2400.000
G1 X103.328 Y98.757 E0.00661 ; infill
;WIDTH:0.344832
G1 X103.734 Y98.351 E0.01440 ; infill
;WIDTH:0.393882
G1 X103.883 Y98.202 E0.00613 ; infill
;WIDTH:0.416562
G1 X104.204 Y97.890 E0.01391 ; infill
G1 X104.591 Y97.916 E0.01204 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.204 Y97.890 E-0.10230 ; wipe and retract
G1 X103.883 Y98.202 E-0.11815 ; wipe and retract
;WIPE_END
G1 E-2.17955 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X101.105 Y98.846 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.139127
G1 F2400.000
G1 X100.967 Y99.202 E0.00306 ; infill
G1 X100.921 Y99.260 E0.00060 ; infill
G1 X100.782 Y99.552 E0.00259 ; infill
G1 X100.718 Y99.768 E0.00180 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.782 Y99.552 E-0.05944 ; wipe and retract
G1 X100.921 Y99.260 E-0.08545 ; wipe and retract
G1 X100.967 Y99.202 E-0.01963 ; wipe and retract
G1 X101.105 Y98.846 E-0.10080 ; wipe and retract
;WIPE_END
G1 E-2.13468 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X115.018 Y103.817 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.839 Y103.691 E0.01013 ; perimeter
G1 X114.625 Y103.443 E0.01520 ; perimeter
G1 X114.504 Y103.191 E0.01297 ; perimeter
G1 X114.288 Y102.884 E0.01738 ; perimeter
G1 X113.954 Y102.691 E0.01786 ; perimeter
G1 X113.600 Y102.566 E0.01738 ; perimeter
G1 X113.501 Y102.512 E0.00521 ; perimeter
G1 X113.344 Y102.375 E0.00964 ; perimeter
G1 X113.111 Y102.247 E0.01234 ; perimeter
G1 X113.042 Y102.144 E0.00573 ; perimeter
G1 X112.825 Y102.011 E0.01183 ; perimeter
G1 X112.274 Y101.848 E0.02662 ; perimeter
G1 X111.914 Y101.813 E0.01672 ; perimeter
G1 X111.749 Y101.734 E0.00850 ; perimeter
G1 X111.464 Y101.723 E0.01317 ; perimeter
G1 X111.174 Y101.549 E0.01571 ; perimeter
G1 X110.820 Y101.297 E0.02010 ; perimeter
G1 X110.689 Y101.165 E0.00863 ; perimeter
G1 X110.330 Y100.894 E0.02081 ; perimeter
G1 X110.205 Y100.741 E0.00916 ; perimeter
G1 X109.821 Y100.371 E0.02468 ; perimeter
G1 X109.196 Y100.187 E0.03018 ; perimeter
G1 X109.127 Y100.201 E0.00325 ; perimeter
G1 X108.864 Y100.141 E0.01249 ; perimeter
G1 X107.755 Y99.812 E0.05359 ; perimeter
G1 X107.472 Y99.706 E0.01400 ; perimeter
G1 X106.697 Y99.504 E0.03710 ; perimeter
G1 X106.372 Y99.358 E0.01651 ; perimeter
G1 X106.173 Y99.215 E0.01133 ; perimeter
G1 X105.983 Y98.918 E0.01632 ; perimeter
G1 X105.949 Y98.696 E0.01040 ; perimeter
G1 X105.894 Y98.595 E0.00530 ; perimeter
G1 X105.876 Y98.424 E0.00799 ; perimeter
G1 X106.102 Y98.340 E0.01118 ; perimeter
G1 X106.477 Y98.432 E0.01786 ; perimeter
G1 X106.582 Y98.510 E0.00605 ; perimeter
G1 X106.881 Y98.663 E0.01559 ; perimeter
G1 X107.134 Y98.859 E0.01481 ; perimeter
G1 X108.056 Y99.126 E0.04444 ; perimeter
G1 X108.138 Y99.113 E0.00386 ; perimeter
G1 X108.594 Y99.191 E0.02145 ; perimeter
G1 X109.068 Y99.343 E0.02305 ; perimeter
G1 X109.324 Y99.523 E0.01452 ; perimeter
G1 X109.540 Y99.730 E0.01381 ; perimeter
G1 X109.543 Y99.758 E0.00133 ; perimeter
G1 X109.689 Y99.955 E0.01137 ; perimeter
G1 X109.938 Y100.145 E0.01449 ; perimeter
G1 X110.178 Y100.262 E0.01236 ; perimeter
G1 X110.589 Y100.300 E0.01916 ; perimeter
G1 X111.066 Y100.469 E0.02343 ; perimeter
G1 X111.830 Y100.935 E0.04144 ; perimeter
G1 X112.125 Y100.992 E0.01393 ; perimeter
G1 X112.609 Y101.183 E0.02411 ; perimeter
G1 X112.697 Y101.202 E0.00413 ; perimeter
G1 X113.174 Y101.459 E0.02510 ; perimeter
G1 X113.407 Y101.618 E0.01306 ; perimeter
G1 X113.749 Y101.702 E0.01634 ; perimeter
G1 X114.144 Y101.981 E0.02239 ; perimeter
G1 X114.268 Y102.138 E0.00928 ; perimeter
G1 X114.547 Y102.657 E0.02728 ; perimeter
G1 X114.804 Y102.798 E0.01357 ; perimeter
G1 X115.153 Y102.906 E0.01691 ; perimeter
G1 X115.315 Y103.009 E0.00890 ; perimeter
G1 X115.446 Y103.192 E0.01043 ; perimeter
G1 X115.480 Y103.402 E0.00983 ; perimeter
G1 X115.436 Y103.740 E0.01580 ; perimeter
G1 X115.467 Y103.936 E0.00921 ; perimeter
G1 X115.559 Y104.254 E0.01531 ; perimeter
G1 X115.751 Y104.486 E0.01395 ; perimeter
G1 X115.835 Y104.696 E0.01048 ; perimeter
G1 X115.859 Y105.085 E0.01805 ; perimeter
G1 X115.854 Y105.137 E0.00242 ; perimeter
G1 X115.741 Y105.439 E0.01493 ; perimeter
G1 X115.498 Y105.599 E0.01346 ; perimeter
G1 X115.557 Y105.830 E0.01103 ; perimeter
G1 X115.532 Y105.904 E0.00361 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.527 Y105.918 E0.00064 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.461 Y106.109 E0.00934 ; perimeter
G1 X115.704 Y106.278 E0.01370 ; perimeter
G1 X115.756 Y106.409 E0.00654 ; perimeter
G1 X115.814 Y106.469 E0.00385 ; perimeter
G1 X115.885 Y106.624 E0.00793 ; perimeter
G1 X115.912 Y106.903 E0.01297 ; perimeter
G1 X115.884 Y107.149 E0.01144 ; perimeter
G1 X115.802 Y107.351 E0.01012 ; perimeter
G1 X115.651 Y107.516 E0.01035 ; perimeter
G1 X115.546 Y107.562 E0.00529 ; perimeter
G1 X115.367 Y107.514 E0.00857 ; perimeter
G1 X115.276 Y107.435 E0.00558 ; perimeter
G1 X115.171 Y107.242 E0.01018 ; perimeter
G1 X115.115 Y107.032 E0.01010 ; perimeter
G1 X115.104 Y106.902 E0.00601 ; perimeter
G1 X115.171 Y106.575 E0.01548 ; perimeter
G1 X115.460 Y106.099 E0.02578 ; perimeter
G1 X115.452 Y105.913 E0.00864 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.452 Y105.892 E0.00089 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.440 Y105.608 E0.01314 ; perimeter
G1 X115.295 Y105.486 E0.00881 ; perimeter
G1 X115.189 Y105.226 E0.01300 ; perimeter
G1 X115.150 Y104.962 E0.01233 ; perimeter
G1 X115.181 Y104.624 E0.01573 ; perimeter
G1 X115.191 Y104.162 E0.02142 ; perimeter
G1 X115.045 Y103.870 E0.01511 ; perimeter
G1 X115.091 Y103.611 F10800.000 ; move inwards before travel
G1 X115.219 Y103.540 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.361705
G1 F2400.000
G1 X115.006 Y103.281 E0.00887 ; infill
;WIDTH:0.350665
G1 X114.967 Y103.259 E0.00115 ; infill
;WIDTH:0.320818
G1 X114.948 Y103.246 E0.00054 ; infill
;WIDTH:0.307053
G1 X114.724 Y103.092 E0.00596 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.948 Y103.246 E-0.07167 ; wipe and retract
;WIPE_END
G1 E-2.32833 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X115.569 Y105.211 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.171188
G1 F2400.000
G1 X115.486 Y104.643 E0.00612 ; infill
G1 X115.430 Y104.476 E0.00188 ; infill
G1 X115.509 Y104.571 F10800.000 ; move to first infill point
;WIDTH:0.252122
G1 F2400.000
G1 X115.511 Y105.090 E0.00904 ; infill
;WIDTH:0.23708
G1 X115.486 Y105.317 E0.00368 ; infill
G1 X115.462 Y106.559 F10800.000 ; move to first infill point
;WIDTH:0.134021
G1 F2400.000
G1 X115.506 Y107.302 E0.00563 ; infill
G1 X115.498 Y107.299 F10800.000 ; move to first infill point
;WIDTH:0.319596
G1 F2400.000
G1 X115.521 Y106.723 E0.01328 ; infill
;WIDTH:0.305522
G1 X115.532 Y106.497 E0.00492 ; infill
G1 X115.510 Y106.481 F10800.000 ; move to first infill point
;WIDTH:0.147949
G1 F2400.000
G1 X115.526 Y107.295 E0.00711 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y106.481 E-0.21488 ; wipe and retract
;WIPE_END
G1 E-2.18512 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X111.098 Y101.199 ; move to first infill point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.361596
G1 F2400.000
G1 X111.876 Y101.352 E0.02100 ; infill
;WIDTH:0.398088
G1 X112.180 Y101.440 E0.00936 ; infill
;WIDTH:0.297116
G1 X112.568 Y101.551 E0.00854 ; infill
G1 X112.758 Y101.629 E0.00433 ; infill
;WIDTH:0.199098
G1 X112.967 Y101.717 E0.00295 ; infill
G1 X113.262 Y101.906 E0.00455 ; infill
;WIDTH:0.21216
G1 X113.286 Y101.924 E0.00042 ; infill
G1 X113.520 Y101.894 F10800.000 ; move to first infill point
;WIDTH:0.163016
G1 F2400.000
G1 X114.182 Y102.515 E0.00906 ; infill
G1 X114.130 Y102.391 F10800.000 ; move to first infill point
;WIDTH:0.358316
G1 F2400.000
G1 X113.762 Y102.200 E0.01087 ; infill
G1 X113.583 Y102.065 E0.00589 ; infill
;WIDTH:0.343531
G1 X113.553 Y102.051 E0.00084 ; infill
;WIDTH:0.330983
G1 X113.274 Y101.942 E0.00717 ; infill
;WIDTH:0.304042
G1 X112.995 Y101.833 E0.00650 ; infill
G1 X112.071 Y101.586 F10800.000 ; move to first infill point
;WIDTH:0.426258
G1 F2400.000
G1 X111.092 Y100.976 E0.03677 ; infill
;WIDTH:0.398735
G1 X110.959 Y100.871 E0.00501 ; infill
;WIDTH:0.358535
G1 X110.891 Y100.824 E0.00218 ; infill
;WIDTH:0.348693
G1 X110.763 Y100.752 E0.00373 ; infill
;WIDTH:0.308392
G1 X110.635 Y100.680 E0.00324 ; infill
;WIDTH:0.268089
G1 X110.568 Y100.647 E0.00140 ; infill
;WIDTH:0.240649
G1 X110.378 Y100.523 E0.00373 ; infill
G1 X109.379 Y99.968 F10800.000 ; move to first infill point
;WIDTH:0.30333
G1 F2400.000
G1 X108.882 Y99.716 E0.01205 ; infill
G1 X108.495 Y99.597 E0.00877 ; infill
G1 X108.135 Y99.513 E0.00801 ; infill
G1 X108.062 Y99.508 F10800.000 ; move to first infill point
;WIDTH:0.317842
G1 F2400.000
G1 X108.004 Y99.498 E0.00134 ; infill
;WIDTH:0.304496
G1 X107.587 Y99.365 E0.00952 ; infill
;WIDTH:0.280464
G1 X106.988 Y99.199 E0.01228 ; infill
G1 X106.276 Y98.928 E0.01504 ; infill
G1 X106.849 Y99.294 F10800.000 ; move to first infill point
;WIDTH:0.327667
G1 F2400.000
G1 X106.373 Y98.826 E0.01581 ; infill
;WIDTH:0.317444
G1 X106.335 Y98.785 E0.00128 ; infill
;WIDTH:0.296918
G1 X106.238 Y98.625 E0.00394 ; infill
G1 X106.202 Y98.754 F10800.000 ; move to first infill point
;WIDTH:0.406027
G1 F2400.000
G1 X107.309 Y99.414 E0.03894 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.202 Y98.754 E-0.34038 ; wipe and retract
;WIPE_END
G1 E-2.05962 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X115.257 Y110.258 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.420 Y110.165 E0.00869 ; perimeter
G1 X115.553 Y110.157 E0.00618 ; perimeter
G1 X115.688 Y110.198 E0.00654 ; perimeter
G1 X115.829 Y110.354 E0.00975 ; perimeter
G1 X115.878 Y110.526 E0.00829 ; perimeter
G1 X115.857 Y110.788 E0.01218 ; perimeter
G1 X115.751 Y110.959 E0.00931 ; perimeter
G1 X115.667 Y111.016 E0.00469 ; perimeter
G1 X115.552 Y111.046 E0.00554 ; perimeter
G1 X115.394 Y111.028 E0.00734 ; perimeter
G1 X115.288 Y110.969 E0.00562 ; perimeter
G1 X115.206 Y110.851 E0.00665 ; perimeter
G1 X115.166 Y110.682 E0.00808 ; perimeter
G1 X115.165 Y110.494 E0.00871 ; perimeter
G1 X115.235 Y110.314 E0.00895 ; perimeter
G1 X115.439 Y110.304 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.420 Y110.165 E-0.06263 ; wipe and retract
G1 X115.553 Y110.157 E-0.03520 ; wipe and retract
G1 X115.688 Y110.198 E-0.03727 ; wipe and retract
G1 X115.829 Y110.354 E-0.05553 ; wipe and retract
G1 X115.878 Y110.526 E-0.04726 ; wipe and retract
G1 X115.857 Y110.788 E-0.06937 ; wipe and retract
G1 X115.751 Y110.959 E-0.05305 ; wipe and retract
G1 X115.667 Y111.016 E-0.02673 ; wipe and retract
G1 X115.552 Y111.046 E-0.03155 ; wipe and retract
G1 X115.394 Y111.028 E-0.04182 ; wipe and retract
G1 X115.288 Y110.969 E-0.03201 ; wipe and retract
G1 X115.206 Y110.851 E-0.03787 ; wipe and retract
G1 X115.166 Y110.682 E-0.04602 ; wipe and retract
G1 X115.165 Y110.494 E-0.04960 ; wipe and retract
G1 X115.235 Y110.314 E-0.05097 ; wipe and retract
;WIPE_END
G1 E-1.72314 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X115.372 Y114.904 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.454 Y114.962 E0.00462 ; perimeter
G1 X115.509 Y115.041 E0.00446 ; perimeter
G1 X115.544 Y115.132 E0.00454 ; perimeter
G1 X115.559 Y115.264 E0.00613 ; perimeter
G1 X115.533 Y115.384 E0.00567 ; perimeter
G1 X115.384 Y115.600 E0.01219 ; perimeter
G1 X115.213 Y115.741 E0.01027 ; perimeter
G1 X115.082 Y115.804 E0.00671 ; perimeter
G1 X114.812 Y115.826 E0.01255 ; perimeter
G1 X114.668 Y115.792 E0.00686 ; perimeter
G1 X114.600 Y115.756 E0.00356 ; perimeter
G1 X114.521 Y115.661 E0.00571 ; perimeter
G1 X114.477 Y115.548 E0.00564 ; perimeter
G1 X114.467 Y115.380 E0.00776 ; perimeter
G1 X114.545 Y115.224 E0.00809 ; perimeter
G1 X114.733 Y115.021 E0.01282 ; perimeter
G1 X114.969 Y114.877 E0.01279 ; perimeter
G1 X115.073 Y114.852 E0.00495 ; perimeter
G1 X115.210 Y114.849 E0.00638 ; perimeter
G1 X115.315 Y114.886 E0.00517 ; perimeter
G1 X115.378 Y115.004 F10800.000 ; move inwards before travel
G1 X115.128 Y115.263 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.362932
G1 F2400.000
G1 X115.168 Y115.243 E0.00118 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.128 Y115.263 E-0.01175 ; wipe and retract
;WIPE_END
G1 E-2.38825 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 X113.134 Y115.519 ; move to first perimeter point
G1 Z9.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.191 Y115.622 E0.00543 ; perimeter
G1 X113.182 Y115.798 E0.00820 ; perimeter
G1 X113.103 Y115.952 E0.00801 ; perimeter
G1 X112.996 Y116.036 E0.00629 ; perimeter
G1 X112.807 Y116.106 E0.00933 ; perimeter
G1 X112.448 Y116.167 E0.01684 ; perimeter
G1 X111.899 Y116.159 E0.02547 ; perimeter
G1 X111.813 Y116.138 E0.00407 ; perimeter
G1 X111.499 Y115.986 E0.01615 ; perimeter
G1 X111.388 Y115.903 E0.00642 ; perimeter
G1 X111.381 Y115.813 E0.00417 ; perimeter
G1 X111.339 Y115.753 E0.00343 ; perimeter
G1 X111.368 Y115.713 E0.00229 ; perimeter
G1 X111.390 Y115.616 E0.00462 ; perimeter
G1 X111.414 Y115.594 E0.00152 ; perimeter
G1 X111.605 Y115.479 E0.01032 ; perimeter
G1 X111.930 Y115.359 E0.01605 ; perimeter
G1 X112.422 Y115.318 E0.02286 ; perimeter
G1 X112.789 Y115.351 E0.01708 ; perimeter
G1 X112.920 Y115.392 E0.00636 ; perimeter
G1 X113.082 Y115.488 E0.00874 ; perimeter
G1 X113.095 Y115.630 F10800.000 ; move inwards before travel
G1 X112.004 Y115.757 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333837
G1 F2400.000
G1 X112.706 Y115.731 E0.01700 ; infill
G1 X112.945 Y115.699 E0.00584 ; infill
;LAYER_CHANGE
;Z:9.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;9.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.706 Y115.731 E-0.06376 ; wipe and retract
G1 X112.004 Y115.757 E-0.18544 ; wipe and retract
;WIPE_END
G1 E-2.15080 F2400.000 ; retract
G1 Z9.475 F10800.000 ; lift Z
G1 Z9.600 ; move to next layer (47)
;AFTER_LAYER_CHANGE
;9.6
G1 Z9.675 ; lift Z
G1 X101.438 Y110.100 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.071 Y110.319 E0.01448 ; perimeter
G1 X100.894 Y110.074 E0.01021 ; perimeter
G1 X101.164 Y110.121 E0.00927 ; perimeter
G1 X101.379 Y110.105 E0.00729 ; perimeter
G1 X100.951 Y110.753 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X100.932 Y111.091 E0.01147 ; perimeter
G1 X101.025 Y111.365 E0.00980 ; perimeter
G1 X100.949 Y111.310 E0.00315 ; perimeter
G1 X100.561 Y111.202 E0.01366 ; perimeter
G1 X100.703 Y111.114 E0.00566 ; perimeter
G1 X100.771 Y110.892 E0.00786 ; perimeter
G1 X100.904 Y110.789 E0.00567 ; perimeter
G1 X101.926 Y112.118 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X102.164 Y112.227 E0.00886 ; perimeter
G1 X102.657 Y112.237 E0.01670 ; perimeter
G1 X102.537 Y112.298 E0.00458 ; perimeter
G1 X102.342 Y112.499 E0.00948 ; perimeter
G1 X102.135 Y112.637 E0.00838 ; perimeter
G1 X102.130 Y112.531 E0.00359 ; perimeter
G1 X101.952 Y112.171 E0.01357 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.164 Y112.227 E-0.05768 ; wipe and retract
G1 X102.657 Y112.237 E-0.13022 ; wipe and retract
G1 X102.537 Y112.298 E-0.03574 ; wipe and retract
G1 X102.342 Y112.499 E-0.07391 ; wipe and retract
G1 X102.135 Y112.637 E-0.06535 ; wipe and retract
G1 X102.130 Y112.531 E-0.02797 ; wipe and retract
G1 X101.952 Y112.171 E-0.10578 ; wipe and retract
;WIPE_END
G1 E-1.90336 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X104.024 Y114.811 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.430 Y114.751 E0.01387 ; perimeter
G1 X104.806 Y114.534 E0.01470 ; perimeter
G1 X104.765 Y114.602 E0.00268 ; perimeter
G1 X104.799 Y114.749 E0.00512 ; perimeter
G1 X104.712 Y114.881 E0.00535 ; perimeter
G1 X104.721 Y114.923 E0.00145 ; perimeter
G1 X104.357 Y114.906 E0.01235 ; perimeter
G1 X104.082 Y114.829 E0.00967 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.430 Y114.751 E-0.09413 ; wipe and retract
G1 X104.806 Y114.534 E-0.11462 ; wipe and retract
G1 X104.765 Y114.602 E-0.02086 ; wipe and retract
G1 X104.799 Y114.749 E-0.03991 ; wipe and retract
G1 X104.712 Y114.881 E-0.04169 ; wipe and retract
G1 X104.721 Y114.923 E-0.01133 ; wipe and retract
G1 X104.357 Y114.906 E-0.09629 ; wipe and retract
G1 X104.082 Y114.829 E-0.07537 ; wipe and retract
;WIPE_END
G1 E-1.90580 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X104.554 Y111.583 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.592 Y111.561 E0.00147 ; perimeter
G1 X104.601 Y111.577 E0.00064 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.592 Y111.561 E-0.00501 ; wipe and retract
G1 X104.601 Y111.577 E-0.00501 ; wipe and retract
;WIPE_END
G1 E-2.38999 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X100.565 Y110.442 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.384 Y110.191 E0.01432 ; perimeter
G1 X100.337 Y109.897 E0.01381 ; perimeter
G1 X100.230 Y109.776 E0.00745 ; perimeter
G1 X100.194 Y109.658 E0.00574 ; perimeter
G1 X100.209 Y109.591 E0.00315 ; perimeter
G1 X100.322 Y109.557 E0.00547 ; perimeter
G1 X100.654 Y109.625 E0.01570 ; perimeter
G1 X100.839 Y109.591 E0.00874 ; perimeter
G1 X101.024 Y109.595 E0.00855 ; perimeter
G1 X101.200 Y109.635 E0.00836 ; perimeter
G1 X102.247 Y109.555 E0.04865 ; perimeter
G1 X102.668 Y109.598 E0.01959 ; perimeter
G1 X102.787 Y109.636 E0.00581 ; perimeter
G1 X102.848 Y109.750 E0.00598 ; perimeter
G1 X102.838 Y109.779 E0.00145 ; perimeter
G1 X102.606 Y110.032 E0.01589 ; perimeter
G1 X102.384 Y110.180 E0.01235 ; perimeter
G1 X101.841 Y110.421 E0.02752 ; perimeter
G1 X101.439 Y110.661 E0.02169 ; perimeter
G1 X101.418 Y111.025 E0.01689 ; perimeter
G1 X101.490 Y111.236 E0.01035 ; perimeter
G1 X101.767 Y111.514 E0.01816 ; perimeter
G1 X102.274 Y111.747 E0.02584 ; perimeter
G1 X102.808 Y111.758 E0.02477 ; perimeter
G1 X103.265 Y111.628 E0.02197 ; perimeter
G1 X104.208 Y111.230 E0.04742 ; perimeter
G1 X104.531 Y111.033 E0.01756 ; perimeter
G1 X104.582 Y110.960 E0.00412 ; perimeter
G1 X104.766 Y110.857 E0.00976 ; perimeter
G1 X104.797 Y110.859 E0.00142 ; perimeter
G1 X104.901 Y110.980 E0.00736 ; perimeter
G1 X104.983 Y111.171 E0.00968 ; perimeter
G1 X105.039 Y111.372 E0.00962 ; perimeter
G1 X105.373 Y111.988 E0.03247 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.540 Y112.283 E0.01418 ; perimeter (bridge)
G1 X105.574 Y112.382 E0.00436 ; perimeter (bridge)
G1 X105.548 Y112.466 E0.00368 ; perimeter (bridge)
G1 X105.441 Y112.295 E0.00842 ; perimeter (bridge)
G1 X105.050 Y112.156 E0.01734 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.817 Y112.074 E0.01144 ; perimeter
G1 X104.314 Y112.058 E0.02335 ; perimeter
G1 X104.091 Y112.153 E0.01122 ; perimeter
G1 X103.767 Y112.231 E0.01543 ; perimeter
G1 X102.827 Y112.691 E0.04848 ; perimeter
G1 X102.652 Y112.872 E0.01165 ; perimeter
G1 X102.496 Y112.975 E0.00864 ; perimeter
G1 X102.316 Y113.443 E0.02321 ; perimeter
G1 X102.550 Y114.058 E0.03048 ; perimeter
G1 X102.880 Y114.101 E0.01540 ; perimeter
G1 X103.085 Y114.168 E0.01001 ; perimeter
G1 X103.196 Y114.226 E0.00577 ; perimeter
G1 X103.799 Y114.357 E0.02861 ; perimeter
G1 X104.269 Y114.287 E0.02198 ; perimeter
G1 X104.678 Y114.052 E0.02188 ; perimeter
G1 X105.093 Y113.738 E0.02407 ; perimeter
G1 X105.394 Y113.575 E0.01586 ; perimeter
G1 X105.553 Y113.378 E0.01171 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.589 Y113.333 E0.00245 ; perimeter (bridge)
G1 X105.735 Y113.303 E0.00623 ; perimeter (bridge)
G1 X105.787 Y113.400 E0.00460 ; perimeter (bridge)
G1 X105.745 Y113.589 E0.00808 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.673 Y113.801 E0.01040 ; perimeter
G1 X105.527 Y114.110 E0.01583 ; perimeter
G1 X105.392 Y114.302 E0.01086 ; perimeter
G1 X105.362 Y114.553 E0.01172 ; perimeter
G1 X105.279 Y114.686 E0.00727 ; perimeter
G1 X105.315 Y114.841 E0.00736 ; perimeter
G1 X105.225 Y114.978 E0.00758 ; perimeter
G1 X105.267 Y115.173 E0.00924 ; perimeter
G1 X105.255 Y115.199 E0.00133 ; perimeter
G1 X105.173 Y115.282 E0.00540 ; perimeter
G1 X105.060 Y115.346 E0.00600 ; perimeter
G1 X104.971 Y115.378 E0.00438 ; perimeter
G1 X104.708 Y115.410 E0.01229 ; perimeter
G1 X104.276 Y115.384 E0.02005 ; perimeter
G1 X103.877 Y115.272 E0.01917 ; perimeter
G1 X103.122 Y114.953 E0.03801 ; perimeter
G1 X101.906 Y114.297 E0.06396 ; perimeter
G1 X101.744 Y114.170 E0.00955 ; perimeter
G1 X101.373 Y114.040 E0.01821 ; perimeter
G1 X101.243 Y113.913 E0.00842 ; perimeter
G1 X101.560 Y113.325 E0.03095 ; perimeter
G1 X101.615 Y113.006 E0.01499 ; perimeter
G1 X101.665 Y112.864 E0.00696 ; perimeter
G1 X101.654 Y112.655 E0.00970 ; perimeter
G1 X101.478 Y112.300 E0.01836 ; perimeter
G1 X101.317 Y112.141 E0.01049 ; perimeter
G1 X101.081 Y112.002 E0.01271 ; perimeter
G1 X100.736 Y111.751 E0.01973 ; perimeter
G1 X100.183 Y111.597 E0.02662 ; perimeter
G1 X99.993 Y111.567 E0.00892 ; perimeter
G1 X99.666 Y111.574 E0.01511 ; perimeter
G1 X99.347 Y111.518 E0.01504 ; perimeter
G1 X99.207 Y111.516 E0.00647 ; perimeter
G1 X99.037 Y111.440 E0.00863 ; perimeter
G1 X99.264 Y111.280 E0.01285 ; perimeter
G1 X99.623 Y111.113 E0.01833 ; perimeter
G1 X99.933 Y111.021 E0.01497 ; perimeter
G1 X100.296 Y110.799 E0.01973 ; perimeter
G1 X100.355 Y110.605 E0.00937 ; perimeter
G1 X100.518 Y110.479 E0.00954 ; perimeter
G1 X100.796 Y110.237 F10800.000 ; move inwards before travel
G1 X101.669 Y110.029 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316853
G1 F2400.000
G1 X102.039 Y109.936 E0.00869 ; infill
;WIDTH:0.223538
G1 X102.433 Y109.816 E0.00619 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.039 Y109.936 E-0.10881 ; wipe and retract
;WIPE_END
G1 E-2.29119 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X101.524 Y111.644 ; move to first infill point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.129389
G1 F2400.000
G1 X101.427 Y111.576 E0.00085 ; infill
G1 X101.365 Y111.563 E0.00046 ; infill
;WIDTH:0.234389
G1 X101.333 Y111.556 E0.00051 ; infill
G1 X101.303 Y111.610 E0.00098 ; infill
;WIDTH:0.333425
G1 X101.272 Y111.663 E0.00149 ; infill
G1 X101.283 Y111.677 E0.00044 ; infill
;WIDTH:0.323681
G1 X101.596 Y112.048 E0.01132 ; infill
G1 X101.597 Y112.047 F10800.000 ; move to first infill point
;WIDTH:0.142826
G1 F2400.000
G1 X101.194 Y111.540 E0.00538 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.597 Y112.047 E-0.17088 ; wipe and retract
;WIPE_END
G1 E-2.22912 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X104.315 Y111.621 ; move to first infill point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.365088
G1 F2400.000
G1 X103.810 Y111.820 E0.01455 ; infill
;WIDTH:0.339003
G1 X103.656 Y111.871 E0.00399 ; infill
;WIDTH:0.312916
G1 X102.891 Y112.179 E0.01851 ; infill
G1 X101.937 Y113.094 F10800.000 ; move to first infill point
;WIDTH:0.115244
G1 F2400.000
G1 X101.890 Y113.111 E0.00030 ; infill
G1 X101.982 Y114.022 F10800.000 ; move to first infill point
;WIDTH:0.117495
G1 F2400.000
G1 X102.061 Y114.065 E0.00056 ; infill
;WIDTH:0.156518
G1 X102.343 Y114.192 E0.00293 ; infill
G1 X102.476 Y114.313 F10800.000 ; move to first infill point
;WIDTH:0.137124
G1 F2400.000
G1 X102.586 Y114.350 E0.00091 ; infill
;WIDTH:0.177328
G1 X102.697 Y114.386 E0.00130 ; infill
;WIDTH:0.222085
G1 X102.829 Y114.432 E0.00208 ; infill
;WIDTH:0.24523
G1 X103.091 Y114.553 E0.00487 ; infill
;WIDTH:0.270581
G1 X103.184 Y114.586 E0.00186 ; infill
;WIDTH:0.295931
G1 X103.277 Y114.620 E0.00207 ; infill
;WIDTH:0.330261
G1 X103.531 Y114.700 E0.00637 ; infill
;WIDTH:0.364591
G1 X103.785 Y114.780 E0.00713 ; infill
G1 X104.967 Y114.354 F10800.000 ; move to first infill point
;WIDTH:0.252729
G1 F2400.000
G1 X105.086 Y114.160 E0.00397 ; infill
;WIDTH:0.15096
G1 X105.345 Y113.905 E0.00327 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.086 Y114.160 E-0.09599 ; wipe and retract
;WIPE_END
G1 E-2.30401 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X101.751 Y107.507 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.557 Y107.524 E0.00659 ; perimeter
G1 X101.387 Y107.491 E0.00587 ; perimeter
G1 X101.171 Y107.513 E0.00732 ; perimeter
G1 X101.423 Y106.931 E0.02146 ; perimeter
G1 X101.709 Y106.373 E0.02121 ; perimeter
G1 X101.843 Y106.026 E0.01259 ; perimeter
G1 X101.842 Y105.865 E0.00546 ; perimeter
G1 X102.053 Y106.228 E0.01422 ; perimeter
G1 X101.868 Y106.455 E0.00992 ; perimeter
G1 X101.634 Y106.962 E0.01887 ; perimeter
G1 X101.728 Y107.452 E0.01689 ; perimeter
G1 X102.134 Y107.029 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.175 Y107.269 E0.01127 ; perimeter
G1 X102.321 Y107.636 E0.01833 ; perimeter
G1 X102.360 Y107.689 E0.00303 ; perimeter
G1 X102.371 Y107.804 E0.00539 ; perimeter
G1 X102.352 Y107.833 E0.00158 ; perimeter
G1 X101.999 Y107.970 E0.01756 ; perimeter
G1 X101.531 Y108.010 E0.02176 ; perimeter
G1 X101.365 Y107.978 E0.00784 ; perimeter
G1 X100.943 Y108.020 E0.01964 ; perimeter
G1 X100.679 Y108.010 E0.01223 ; perimeter
G1 X100.508 Y108.028 E0.00798 ; perimeter
G1 X100.372 Y107.900 E0.00863 ; perimeter
G1 X100.331 Y107.898 E0.00192 ; perimeter
G1 X100.329 Y107.855 E0.00203 ; perimeter
G1 X100.447 Y107.659 E0.01061 ; perimeter
G1 X100.508 Y107.514 E0.00727 ; perimeter
G1 X100.764 Y107.243 E0.01726 ; perimeter
G1 X100.986 Y106.725 E0.02611 ; perimeter
G1 X101.269 Y106.176 E0.02859 ; perimeter
G1 X101.360 Y105.937 E0.01184 ; perimeter
G1 X101.360 Y105.679 E0.01196 ; perimeter
G1 X101.410 Y105.428 E0.01186 ; perimeter
G1 X101.313 Y105.174 E0.01257 ; perimeter
G1 X101.289 Y104.948 E0.01056 ; perimeter
G1 X101.308 Y104.744 E0.00946 ; perimeter
G1 X101.410 Y104.362 E0.01831 ; perimeter
G1 X101.449 Y103.782 E0.02694 ; perimeter
G1 X101.420 Y103.223 E0.02593 ; perimeter
G1 X101.297 Y102.763 E0.02207 ; perimeter
G1 X101.221 Y102.360 E0.01898 ; perimeter
G1 X101.249 Y102.047 E0.01454 ; perimeter
G1 X101.320 Y101.653 E0.01857 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.329 Y101.652 E0.00037 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.480 Y101.774 E0.00902 ; perimeter
G1 X101.530 Y101.883 E0.00557 ; perimeter
G1 X101.766 Y102.053 E0.01347 ; perimeter
G1 X101.843 Y102.195 E0.00750 ; perimeter
G1 X102.013 Y102.344 E0.01048 ; perimeter
G1 X102.150 Y102.626 E0.01453 ; perimeter
G1 X102.209 Y102.999 E0.01749 ; perimeter
G1 X102.236 Y103.319 E0.01484 ; perimeter
G1 X102.167 Y103.796 E0.02234 ; perimeter
G1 X102.173 Y104.046 E0.01157 ; perimeter
G1 X102.123 Y104.389 E0.01609 ; perimeter
G1 X102.167 Y105.254 E0.04008 ; perimeter
G1 X102.202 Y105.515 E0.01223 ; perimeter
G1 X102.386 Y105.859 E0.01806 ; perimeter
G1 X102.482 Y105.992 E0.00762 ; perimeter
G1 X102.534 Y106.147 E0.00754 ; perimeter
G1 X102.566 Y106.189 E0.00249 ; perimeter
G1 X102.570 Y106.252 E0.00290 ; perimeter
G1 X102.512 Y106.429 E0.00862 ; perimeter
G1 X102.280 Y106.713 E0.01699 ; perimeter
G1 X102.159 Y106.974 E0.01333 ; perimeter
G1 X101.915 Y107.134 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.175 Y107.269 E-0.07780 ; wipe and retract
G1 X102.321 Y107.636 E-0.10444 ; wipe and retract
G1 X102.360 Y107.689 E-0.01723 ; wipe and retract
G1 X102.371 Y107.804 E-0.03071 ; wipe and retract
G1 X102.352 Y107.833 E-0.00899 ; wipe and retract
G1 X101.999 Y107.970 E-0.10001 ; wipe and retract
G1 X101.531 Y108.010 E-0.12397 ; wipe and retract
G1 X101.365 Y107.978 E-0.04464 ; wipe and retract
G1 X100.943 Y108.020 E-0.11191 ; wipe and retract
G1 X100.679 Y108.010 E-0.06965 ; wipe and retract
G1 X100.508 Y108.028 E-0.04549 ; wipe and retract
G1 X100.372 Y107.900 E-0.04916 ; wipe and retract
G1 X100.331 Y107.898 E-0.01095 ; wipe and retract
G1 X100.329 Y107.855 E-0.01154 ; wipe and retract
G1 X100.447 Y107.659 E-0.06043 ; wipe and retract
G1 X100.508 Y107.514 E-0.04140 ; wipe and retract
G1 X100.764 Y107.243 E-0.09833 ; wipe and retract
G1 X100.986 Y106.725 E-0.14875 ; wipe and retract
G1 X101.269 Y106.176 E-0.16288 ; wipe and retract
G1 X101.360 Y105.937 E-0.06744 ; wipe and retract
G1 X101.360 Y105.679 E-0.06816 ; wipe and retract
G1 X101.410 Y105.428 E-0.06759 ; wipe and retract
G1 X101.313 Y105.174 E-0.07163 ; wipe and retract
G1 X101.289 Y104.948 E-0.06013 ; wipe and retract
G1 X101.308 Y104.744 E-0.05392 ; wipe and retract
G1 X101.410 Y104.362 E-0.10434 ; wipe and retract
G1 X101.449 Y103.782 E-0.15349 ; wipe and retract
G1 X101.420 Y103.223 E-0.14773 ; wipe and retract
G1 X101.297 Y102.763 E-0.12573 ; wipe and retract
G1 X101.268 Y102.608 E-0.04156 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X104.106 Y97.981 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.223 Y97.843 E0.00612 ; perimeter
G1 X104.243 Y97.721 E0.00417 ; perimeter
G1 X104.415 Y97.881 E0.00795 ; perimeter
G1 X104.163 Y97.962 E0.00895 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.223 Y97.843 E-0.03529 ; wipe and retract
G1 X104.243 Y97.721 E-0.03251 ; wipe and retract
G1 X104.415 Y97.881 E-0.06195 ; wipe and retract
G1 X104.163 Y97.962 E-0.06975 ; wipe and retract
;WIPE_END
G1 E-2.20051 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X101.731 Y98.560 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.401 Y98.565 E0.01117 ; perimeter
G1 X101.383 Y98.589 E0.00101 ; perimeter
G1 X101.424 Y98.209 E0.01295 ; perimeter
G1 X101.548 Y98.387 E0.00736 ; perimeter
G1 X101.687 Y98.519 E0.00648 ; perimeter
G1 X103.115 Y98.563 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.411 Y98.225 E0.02079 ; perimeter
G1 X103.440 Y98.137 E0.00428 ; perimeter
G1 X103.621 Y97.913 E0.01337 ; perimeter
G1 X103.660 Y97.761 E0.00725 ; perimeter
G1 X103.769 Y97.632 E0.00783 ; perimeter
G1 X103.799 Y97.454 E0.00835 ; perimeter
G1 X103.913 Y97.277 E0.00977 ; perimeter
G1 X104.030 Y97.157 E0.00775 ; perimeter
G1 X104.194 Y97.115 E0.00785 ; perimeter
G1 X104.434 Y97.240 E0.01254 ; perimeter
G1 X104.739 Y97.525 E0.01934 ; perimeter
G1 X104.973 Y97.643 E0.01213 ; perimeter
G1 X105.322 Y97.932 E0.02096 ; perimeter
G1 X105.558 Y98.042 E0.01209 ; perimeter
G1 X106.347 Y98.284 E0.03823 ; perimeter
G1 X106.708 Y98.547 E0.02068 ; perimeter
G1 X106.999 Y98.839 E0.01908 ; perimeter
G1 X107.126 Y99.031 E0.01067 ; perimeter
G1 X107.678 Y99.161 E0.02625 ; perimeter
G1 X107.829 Y99.160 E0.00703 ; perimeter
G1 X108.075 Y99.237 E0.01191 ; perimeter
G1 X108.443 Y99.179 E0.01728 ; perimeter
G1 X108.833 Y99.229 E0.01820 ; perimeter
G1 X109.054 Y99.306 E0.01083 ; perimeter
G1 X109.195 Y99.424 E0.00850 ; perimeter
G1 X109.414 Y99.653 E0.01469 ; perimeter
G1 X109.427 Y99.798 E0.00675 ; perimeter
G1 X109.413 Y100.005 E0.00963 ; perimeter
G1 X109.399 Y100.056 E0.00246 ; perimeter
G1 X109.358 Y100.044 E0.00198 ; perimeter
G1 X108.989 Y100.117 E0.01744 ; perimeter
G1 X108.230 Y99.911 E0.03643 ; perimeter
G1 X108.149 Y99.847 E0.00479 ; perimeter
G1 X107.558 Y99.624 E0.02922 ; perimeter
G1 X106.478 Y99.320 E0.05199 ; perimeter
G1 X106.103 Y99.104 E0.02004 ; perimeter
G1 X105.863 Y98.815 E0.01741 ; perimeter
G1 X105.854 Y98.760 E0.00257 ; perimeter
G1 X105.757 Y98.578 E0.00953 ; perimeter
G1 X105.420 Y98.335 E0.01923 ; perimeter
G1 X104.988 Y98.205 E0.02091 ; perimeter
G1 X104.647 Y98.347 E0.01710 ; perimeter
G1 X104.508 Y98.358 E0.00648 ; perimeter
G1 X104.280 Y98.431 E0.01109 ; perimeter
G1 X103.972 Y98.615 E0.01662 ; perimeter
G1 X103.816 Y98.735 E0.00913 ; perimeter
G1 X103.526 Y98.874 E0.01490 ; perimeter
G1 X103.206 Y98.909 E0.01491 ; perimeter
G1 X103.058 Y98.888 E0.00691 ; perimeter
G1 X102.760 Y98.962 E0.01423 ; perimeter
G1 X102.474 Y98.990 E0.01332 ; perimeter
G1 X102.061 Y98.978 E0.01913 ; perimeter
G1 X101.965 Y99.038 E0.00525 ; perimeter
G1 X101.645 Y99.043 E0.01484 ; perimeter
G1 X101.473 Y99.272 E0.01323 ; perimeter
G1 X101.314 Y99.420 E0.01008 ; perimeter
G1 X101.035 Y99.875 E0.02471 ; perimeter
G1 X101.174 Y100.659 E0.03691 ; perimeter
G1 X101.186 Y100.851 E0.00891 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.203 Y101.123 E0.01138 ; perimeter (bridge)
G1 X101.227 Y101.200 E0.00337 ; perimeter (bridge)
G1 X101.258 Y101.496 E0.01244 ; perimeter (bridge)
G1 X100.928 Y101.004 E0.02477 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.467 Y100.263 E0.04043 ; perimeter
G1 X100.273 Y99.740 E0.02580 ; perimeter
G1 X100.296 Y99.536 E0.00951 ; perimeter
G1 X100.396 Y99.334 E0.01047 ; perimeter
G1 X100.625 Y99.011 E0.01836 ; perimeter
G1 X100.905 Y98.519 E0.02619 ; perimeter
G1 X100.964 Y97.971 E0.02552 ; perimeter
G1 X100.940 Y97.793 E0.00835 ; perimeter
G1 X100.981 Y97.509 E0.01330 ; perimeter
G1 X101.072 Y97.311 E0.01006 ; perimeter
G1 X101.121 Y97.284 E0.00262 ; perimeter
G1 X101.204 Y97.297 E0.00387 ; perimeter
G1 X101.418 Y97.428 E0.01164 ; perimeter
G1 X101.562 Y97.578 E0.00962 ; perimeter
G1 X101.696 Y97.790 E0.01160 ; perimeter
G1 X101.746 Y97.827 E0.00288 ; perimeter
G1 X101.915 Y98.071 E0.01377 ; perimeter
G1 X102.189 Y98.330 E0.01746 ; perimeter
G1 X102.630 Y98.616 E0.02435 ; perimeter
G1 X102.917 Y98.543 E0.01374 ; perimeter
G1 X103.055 Y98.557 E0.00642 ; perimeter
G1 X103.476 Y98.734 F10800.000 ; move inwards before travel
G1 X103.458 Y98.629 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.227468
G1 F2400.000
G1 X103.693 Y98.408 E0.00495 ; infill
;WIDTH:0.242731
G1 X103.925 Y98.143 E0.00585 ; infill
G1 X103.939 Y98.164 F10800.000 ; move to first infill point
;WIDTH:0.320559
G1 F2400.000
G1 X103.772 Y98.308 E0.00508 ; infill
;WIDTH:0.292208
G1 X103.568 Y98.586 E0.00716 ; infill
G1 X104.735 Y97.819 F10800.000 ; move to first infill point
;WIDTH:0.12396
G1 F2400.000
G1 X104.925 Y97.971 E0.00164 ; infill
G1 X106.218 Y98.654 F10800.000 ; move to first infill point
;WIDTH:0.324496
G1 F2400.000
G1 X106.371 Y98.798 E0.00492 ; infill
G1 X106.941 Y99.200 E0.01634 ; infill
G1 X107.817 Y99.454 F10800.000 ; move to first infill point
;WIDTH:0.259572
G1 F2400.000
G1 X109.119 Y99.693 E0.02384 ; infill
G1 X109.185 Y99.766 F10800.000 ; move to first infill point
;WIDTH:0.375104
G1 F2400.000
G1 X108.739 Y99.627 E0.01290 ; infill
G1 X108.449 Y99.570 E0.00816 ; infill
;WIDTH:0.334476
G1 X108.038 Y99.547 E0.00998 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.449 Y99.570 E-0.10866 ; wipe and retract
;WIPE_END
G1 E-2.29134 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X101.263 Y98.801 ; move to first infill point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.436529
G1 F2400.000
G1 X101.081 Y99.062 E0.01042 ; infill
;WIDTH:0.402702
G1 X101.014 Y99.146 E0.00320 ; infill
;WIDTH:0.370203
G1 X100.989 Y99.182 E0.00121 ; infill
;WIDTH:0.362738
G1 X100.752 Y99.547 E0.01156 ; infill
G1 X100.571 Y99.873 E0.00992 ; infill
G1 X100.707 Y99.312 F10800.000 ; move to first infill point
;WIDTH:0.348486
G1 F2400.000
G1 X100.669 Y99.757 E0.01135 ; infill
;WIDTH:0.308957
G1 X100.672 Y99.802 E0.00098 ; infill
;WIDTH:0.283468
G1 X100.676 Y99.846 E0.00089 ; infill
;WIDTH:0.257981
G1 X100.715 Y99.983 E0.00255 ; infill
;WIDTH:0.229127
G1 X100.754 Y100.120 E0.00221 ; infill
;WIDTH:0.200274
G1 X100.790 Y100.217 E0.00135 ; infill
;WIDTH:0.165822
G1 X100.827 Y100.314 E0.00106 ; infill
;WIDTH:0.13137
G1 X100.863 Y100.410 E0.00076 ; infill
G1 X101.549 Y102.194 F10800.000 ; move to first infill point
;WIDTH:0.369447
G1 F2400.000
G1 X101.737 Y102.756 E0.01608 ; infill
G1 X101.800 Y103.049 E0.00814 ; infill
G1 X101.829 Y103.307 E0.00704 ; infill
G1 X101.819 Y103.536 E0.00622 ; infill
;WIDTH:0.273194
G1 X101.803 Y104.023 E0.00933 ; infill
G1 X101.766 Y104.384 E0.00695 ; infill
;WIDTH:0.28113
G1 X101.764 Y104.432 E0.00096 ; infill
;WIDTH:0.321341
G1 X101.751 Y104.561 E0.00299 ; infill
;WIDTH:0.332749
G1 X101.721 Y104.946 E0.00930 ; infill
G1 X101.802 Y105.435 E0.01196 ; infill
;WIDTH:0.344612
G1 X101.796 Y105.628 E0.00485 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.802 Y105.435 E-0.05097 ; wipe and retract
;WIPE_END
G1 E-2.34903 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X111.400 Y101.203 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.727 Y101.365 E0.01235 ; perimeter
G1 X111.573 Y101.437 E0.00576 ; perimeter
G1 X111.499 Y101.385 E0.00308 ; perimeter
G1 X111.429 Y101.256 E0.00497 ; perimeter
G1 X112.966 Y101.560 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.225 Y101.636 E0.01248 ; perimeter
G1 X113.370 Y101.735 E0.00814 ; perimeter
G1 X113.902 Y101.834 E0.02506 ; perimeter
G1 X114.163 Y101.994 E0.01422 ; perimeter
G1 X114.355 Y102.156 E0.01161 ; perimeter
G1 X114.560 Y102.471 E0.01742 ; perimeter
G1 X114.795 Y102.674 E0.01436 ; perimeter
G1 X115.113 Y102.817 E0.01615 ; perimeter
G1 X115.263 Y102.947 E0.00922 ; perimeter
G1 X115.392 Y103.138 E0.01066 ; perimeter
G1 X115.419 Y103.276 E0.00653 ; perimeter
G1 X115.384 Y103.603 E0.01523 ; perimeter
G1 X115.241 Y103.770 E0.01018 ; perimeter
G1 X115.241 Y103.949 E0.00830 ; perimeter
G1 X115.113 Y103.810 E0.00877 ; perimeter
G1 X115.003 Y103.765 E0.00549 ; perimeter
G1 X114.764 Y103.599 E0.01347 ; perimeter
G1 X114.519 Y103.340 E0.01651 ; perimeter
G1 X114.436 Y103.167 E0.00892 ; perimeter
G1 X114.213 Y102.992 E0.01309 ; perimeter
G1 X114.165 Y102.919 E0.00403 ; perimeter
G1 X113.689 Y102.649 E0.02540 ; perimeter
G1 X113.392 Y102.408 E0.01770 ; perimeter
G1 X113.263 Y102.215 E0.01074 ; perimeter
G1 X113.017 Y101.986 E0.01558 ; perimeter
G1 X112.497 Y101.785 E0.02579 ; perimeter
G1 X112.232 Y101.821 E0.01241 ; perimeter
G1 X111.877 Y101.827 E0.01643 ; perimeter
G1 X111.663 Y101.928 E0.01097 ; perimeter
G1 X111.390 Y101.919 E0.01263 ; perimeter
G1 X111.351 Y101.871 E0.00287 ; perimeter
G1 X111.129 Y101.715 E0.01255 ; perimeter
G1 X110.985 Y101.449 E0.01403 ; perimeter
G1 X110.861 Y101.366 E0.00691 ; perimeter
G1 X110.754 Y101.259 E0.00701 ; perimeter
G1 X110.415 Y100.796 E0.02655 ; perimeter
G1 X110.317 Y100.623 E0.00922 ; perimeter
G1 X110.300 Y100.553 E0.00335 ; perimeter
G1 X110.491 Y100.456 E0.00994 ; perimeter
G1 X110.984 Y100.501 E0.02294 ; perimeter
G1 X111.349 Y100.634 E0.01798 ; perimeter
G1 X111.847 Y100.892 E0.02598 ; perimeter
G1 X112.400 Y101.122 E0.02777 ; perimeter
G1 X112.847 Y101.385 E0.02403 ; perimeter
G1 X112.935 Y101.509 E0.00703 ; perimeter
G1 X112.997 Y101.828 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.225 Y101.636 E-0.08341 ; wipe and retract
G1 X113.370 Y101.735 E-0.04638 ; wipe and retract
G1 X113.902 Y101.834 E-0.14275 ; wipe and retract
G1 X114.163 Y101.994 E-0.08100 ; wipe and retract
G1 X114.355 Y102.156 E-0.06617 ; wipe and retract
G1 X114.560 Y102.471 E-0.09925 ; wipe and retract
G1 X114.795 Y102.674 E-0.08181 ; wipe and retract
G1 X115.113 Y102.817 E-0.09202 ; wipe and retract
G1 X115.263 Y102.947 E-0.05252 ; wipe and retract
G1 X115.392 Y103.138 E-0.06074 ; wipe and retract
G1 X115.419 Y103.276 E-0.03720 ; wipe and retract
G1 X115.384 Y103.603 E-0.08675 ; wipe and retract
G1 X115.241 Y103.770 E-0.05799 ; wipe and retract
G1 X115.241 Y103.949 E-0.04726 ; wipe and retract
G1 X115.113 Y103.810 E-0.04994 ; wipe and retract
G1 X115.003 Y103.765 E-0.03130 ; wipe and retract
G1 X114.764 Y103.599 E-0.07674 ; wipe and retract
G1 X114.519 Y103.340 E-0.09408 ; wipe and retract
G1 X114.436 Y103.167 E-0.05084 ; wipe and retract
G1 X114.213 Y102.992 E-0.07460 ; wipe and retract
G1 X114.165 Y102.919 E-0.02294 ; wipe and retract
G1 X113.689 Y102.649 E-0.14470 ; wipe and retract
G1 X113.392 Y102.408 E-0.10081 ; wipe and retract
G1 X113.263 Y102.215 E-0.06119 ; wipe and retract
G1 X113.017 Y101.986 E-0.08876 ; wipe and retract
G1 X112.497 Y101.785 E-0.14692 ; wipe and retract
G1 X112.232 Y101.821 E-0.07072 ; wipe and retract
G1 X111.877 Y101.827 E-0.09363 ; wipe and retract
G1 X111.663 Y101.928 E-0.06247 ; wipe and retract
G1 X111.390 Y101.919 E-0.07197 ; wipe and retract
G1 X111.383 Y101.909 E-0.00317 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X115.342 Y104.475 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.373 Y104.359 E0.00559 ; perimeter
G1 X115.570 Y104.504 E0.01134 ; perimeter
G1 X115.630 Y104.523 E0.00291 ; perimeter
G1 X115.774 Y104.684 E0.01003 ; perimeter
G1 X115.825 Y104.788 E0.00537 ; perimeter
G1 X115.833 Y105.003 E0.00997 ; perimeter
G1 X115.872 Y105.077 E0.00386 ; perimeter
G1 X115.873 Y105.178 E0.00467 ; perimeter
G1 X115.702 Y105.953 E0.03678 ; perimeter
G1 X115.781 Y106.081 E0.00698 ; perimeter
G1 X115.822 Y106.274 E0.00913 ; perimeter
G1 X115.888 Y106.416 E0.00723 ; perimeter
G1 X115.913 Y106.717 E0.01398 ; perimeter
G1 X115.885 Y106.958 E0.01127 ; perimeter
G1 X115.777 Y107.203 E0.01239 ; perimeter
G1 X115.644 Y107.338 E0.00878 ; perimeter
G1 X115.537 Y107.383 E0.00535 ; perimeter
G1 X115.391 Y107.349 E0.00697 ; perimeter
G1 X115.288 Y107.275 E0.00587 ; perimeter
G1 X115.172 Y107.068 E0.01098 ; perimeter
G1 X115.117 Y106.879 E0.00911 ; perimeter
G1 X115.103 Y106.699 E0.00836 ; perimeter
G1 X115.171 Y106.351 E0.01642 ; perimeter
G1 X115.297 Y106.144 E0.01123 ; perimeter
G1 X115.269 Y105.910 E0.01091 ; perimeter
G1 X115.278 Y105.659 E0.01167 ; perimeter
G1 X115.186 Y105.401 E0.01269 ; perimeter
G1 X115.153 Y105.049 E0.01638 ; perimeter
G1 X115.203 Y104.747 E0.01416 ; perimeter
G1 X115.314 Y104.529 E0.01135 ; perimeter
G1 X115.459 Y104.446 F10800.000 ; move inwards before travel
G1 X115.473 Y104.748 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.200833
G1 F2400.000
G1 X115.508 Y104.867 E0.00162 ; infill
;WIDTH:0.237866
G1 X115.495 Y105.061 E0.00315 ; infill
G1 X115.517 Y105.159 E0.00163 ; infill
G1 X115.493 Y105.544 E0.00625 ; infill
G1 X115.543 Y106.203 F10800.000 ; move to first infill point
;WIDTH:0.195556
G1 F2400.000
G1 X115.447 Y107.065 E0.01101 ; infill
G1 X115.532 Y107.109 F10800.000 ; move to first infill point
;WIDTH:0.348324
G1 F2400.000
G1 X115.506 Y106.807 E0.00768 ; infill
G1 X115.515 Y106.611 E0.00498 ; infill
;WIDTH:0.336688
G1 X115.520 Y106.513 E0.00240 ; infill
;WIDTH:0.309494
G1 X115.493 Y106.285 E0.00508 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.520 Y106.513 E-0.06054 ; wipe and retract
;WIPE_END
G1 E-2.33946 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X115.104 Y103.542 ; move to first infill point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.351026
G1 F2400.000
G1 X115.019 Y103.293 E0.00674 ; infill
G1 X114.339 Y102.571 E0.02541 ; infill
G1 X114.320 Y102.660 F10800.000 ; move to first infill point
;WIDTH:0.153951
G1 F2400.000
G1 X114.383 Y102.711 E0.00075 ; infill
;WIDTH:0.171445
G1 X114.646 Y102.944 E0.00375 ; infill
;WIDTH:0.179878
G1 X114.671 Y102.958 E0.00032 ; infill
;WIDTH:0.198046
G1 X115.171 Y103.326 E0.00802 ; infill
G1 X114.232 Y102.392 F10800.000 ; move to first infill point
;WIDTH:0.273669
G1 F2400.000
G1 X113.639 Y102.142 E0.01235 ; infill
;WIDTH:0.263175
G1 X113.462 Y102.079 E0.00343 ; infill
G1 X113.494 Y102.003 F10800.000 ; move to first infill point
;WIDTH:0.323862
G1 F2400.000
G1 X114.117 Y102.455 E0.01797 ; infill
G1 X112.444 Y101.427 F10800.000 ; move to first infill point
;WIDTH:0.243157
G1 F2400.000
G1 X111.924 Y101.580 E0.00903 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.444 Y101.427 E-0.14306 ; wipe and retract
;WIPE_END
G1 E-2.25694 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X115.571 Y110.233 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.684 Y110.267 E0.00549 ; perimeter
G1 X115.810 Y110.395 E0.00833 ; perimeter
G1 X115.878 Y110.608 E0.01035 ; perimeter
G1 X115.855 Y110.860 E0.01171 ; perimeter
G1 X115.764 Y111.014 E0.00829 ; perimeter
G1 X115.663 Y111.091 E0.00588 ; perimeter
G1 X115.548 Y111.121 E0.00549 ; perimeter
G1 X115.421 Y111.111 E0.00593 ; perimeter
G1 X115.279 Y111.034 E0.00746 ; perimeter
G1 X115.182 Y110.882 E0.00834 ; perimeter
G1 X115.155 Y110.738 E0.00681 ; perimeter
G1 X115.161 Y110.589 E0.00690 ; perimeter
G1 X115.259 Y110.335 E0.01262 ; perimeter
G1 X115.300 Y110.294 E0.00267 ; perimeter
G1 X115.426 Y110.236 E0.00643 ; perimeter
G1 X115.511 Y110.234 E0.00390 ; perimeter
G1 X115.617 Y110.342 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.684 Y110.267 E-0.04659 ; wipe and retract
G1 X115.810 Y110.395 E-0.04746 ; wipe and retract
G1 X115.878 Y110.608 E-0.05898 ; wipe and retract
G1 X115.855 Y110.860 E-0.06669 ; wipe and retract
G1 X115.764 Y111.014 E-0.04725 ; wipe and retract
G1 X115.663 Y111.091 E-0.03349 ; wipe and retract
G1 X115.548 Y111.121 E-0.03128 ; wipe and retract
G1 X115.421 Y111.111 E-0.03380 ; wipe and retract
G1 X115.279 Y111.034 E-0.04251 ; wipe and retract
G1 X115.182 Y110.882 E-0.04749 ; wipe and retract
G1 X115.155 Y110.738 E-0.03881 ; wipe and retract
G1 X115.161 Y110.589 E-0.03932 ; wipe and retract
G1 X115.259 Y110.335 E-0.07189 ; wipe and retract
G1 X115.300 Y110.294 E-0.01520 ; wipe and retract
G1 X115.426 Y110.236 E-0.03664 ; wipe and retract
G1 X115.511 Y110.234 E-0.02221 ; wipe and retract
;WIPE_END
G1 E-1.72040 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X115.380 Y114.892 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.464 Y114.951 E0.00477 ; perimeter
G1 X115.518 Y115.027 E0.00433 ; perimeter
G1 X115.553 Y115.124 E0.00479 ; perimeter
G1 X115.566 Y115.254 E0.00603 ; perimeter
G1 X115.538 Y115.382 E0.00606 ; perimeter
G1 X115.475 Y115.495 E0.00602 ; perimeter
G1 X115.387 Y115.596 E0.00620 ; perimeter
G1 X115.223 Y115.729 E0.00980 ; perimeter
G1 X115.074 Y115.807 E0.00776 ; perimeter
G1 X114.758 Y115.840 E0.01472 ; perimeter
G1 X114.623 Y115.811 E0.00640 ; perimeter
G1 X114.535 Y115.768 E0.00453 ; perimeter
G1 X114.422 Y115.579 E0.01023 ; perimeter
G1 X114.415 Y115.392 E0.00867 ; perimeter
G1 X114.501 Y115.243 E0.00797 ; perimeter
G1 X114.710 Y115.031 E0.01378 ; perimeter
G1 X114.979 Y114.864 E0.01466 ; perimeter
G1 X115.210 Y114.832 E0.01081 ; perimeter
G1 X115.323 Y114.872 E0.00555 ; perimeter
G1 X115.389 Y114.994 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.464 Y114.951 E-0.04263 ; wipe and retract
G1 X115.518 Y115.027 E-0.02465 ; wipe and retract
G1 X115.553 Y115.124 E-0.02726 ; wipe and retract
G1 X115.566 Y115.254 E-0.03433 ; wipe and retract
G1 X115.538 Y115.382 E-0.03451 ; wipe and retract
G1 X115.475 Y115.495 E-0.03430 ; wipe and retract
G1 X115.387 Y115.596 E-0.03534 ; wipe and retract
G1 X115.223 Y115.729 E-0.05580 ; wipe and retract
G1 X115.074 Y115.807 E-0.04418 ; wipe and retract
G1 X114.758 Y115.840 E-0.08385 ; wipe and retract
G1 X114.623 Y115.811 E-0.03645 ; wipe and retract
G1 X114.535 Y115.768 E-0.02580 ; wipe and retract
G1 X114.422 Y115.579 E-0.05826 ; wipe and retract
G1 X114.415 Y115.392 E-0.04938 ; wipe and retract
G1 X114.501 Y115.243 E-0.04540 ; wipe and retract
G1 X114.710 Y115.031 E-0.07848 ; wipe and retract
G1 X114.979 Y114.864 E-0.08353 ; wipe and retract
G1 X115.210 Y114.832 E-0.06161 ; wipe and retract
G1 X115.323 Y114.872 E-0.03163 ; wipe and retract
;WIPE_END
G1 E-1.51260 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 X113.299 Y115.942 ; move to first perimeter point
G1 Z9.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.200 Y116.023 E0.00593 ; perimeter
G1 X112.976 Y116.105 E0.01107 ; perimeter
G1 X112.802 Y116.135 E0.00817 ; perimeter
G1 X112.345 Y116.163 E0.02120 ; perimeter
G1 X112.023 Y116.153 E0.01491 ; perimeter
G1 X111.867 Y116.124 E0.00736 ; perimeter
G1 X111.794 Y116.057 E0.00461 ; perimeter
G1 X111.702 Y116.011 E0.00476 ; perimeter
G1 X111.659 Y115.962 E0.00301 ; perimeter
G1 X111.616 Y115.790 E0.00823 ; perimeter
G1 X111.588 Y115.768 E0.00164 ; perimeter
G1 X111.616 Y115.653 E0.00548 ; perimeter
G1 X111.748 Y115.478 E0.01016 ; perimeter
G1 X112.086 Y115.358 E0.01659 ; perimeter
G1 X112.678 Y115.303 E0.02755 ; perimeter
G1 X112.939 Y115.317 E0.01209 ; perimeter
G1 X113.136 Y115.374 E0.00953 ; perimeter
G1 X113.361 Y115.493 E0.01178 ; perimeter
G1 X113.395 Y115.568 E0.00381 ; perimeter
G1 X113.380 Y115.828 E0.01206 ; perimeter
G1 X113.334 Y115.893 E0.00369 ; perimeter
G1 X113.173 Y115.923 F10800.000 ; move inwards before travel
G1 X113.144 Y115.732 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.36396
G1 F2400.000
G1 X112.872 Y115.716 E0.00727 ; infill
G1 X112.081 Y115.769 E0.02115 ; infill
;WIDTH:0.332343
G1 X112.029 Y115.771 E0.00127 ; infill
;WIDTH:0.300795
G1 X112.013 Y115.768 E0.00033 ; infill
;WIDTH:0.284915
G1 X111.979 Y115.763 E0.00071 ; infill
;WIDTH:0.252925
G1 X111.958 Y115.761 E0.00037 ; infill
;WIDTH:0.23643
G1 X111.863 Y115.784 E0.00157 ; infill
;LAYER_CHANGE
;Z:9.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;9.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.958 Y115.761 E-0.02571 ; wipe and retract
;WIPE_END
G1 E-2.37429 F2400.000 ; retract
G1 Z9.675 F10800.000 ; lift Z
G1 Z9.800 ; move to next layer (48)
;AFTER_LAYER_CHANGE
;9.8
G1 Z9.875 ; lift Z
G1 X101.227 Y110.208 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.179 Y110.234 E0.00186 ; perimeter
G1 X101.119 Y110.315 E0.00341 ; perimeter
G1 X101.104 Y110.229 E0.00295 ; perimeter
G1 X101.168 Y110.219 E0.00222 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.179 Y110.234 E-0.00512 ; wipe and retract
G1 X101.119 Y110.315 E-0.02662 ; wipe and retract
G1 X101.104 Y110.229 E-0.02300 ; wipe and retract
G1 X101.168 Y110.219 E-0.01729 ; wipe and retract
;WIPE_END
G1 E-2.32797 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X102.056 Y112.206 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.244 Y112.280 E0.00683 ; perimeter
G1 X102.576 Y112.268 E0.01125 ; perimeter
G1 X102.205 Y112.517 E0.01509 ; perimeter
G1 X102.082 Y112.261 E0.00963 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.244 Y112.280 E-0.04302 ; wipe and retract
G1 X102.576 Y112.268 E-0.08771 ; wipe and retract
G1 X102.205 Y112.517 E-0.11764 ; wipe and retract
G1 X102.082 Y112.261 E-0.07505 ; wipe and retract
;WIPE_END
G1 E-2.07659 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X104.365 Y111.617 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.675 Y111.320 E0.01454 ; perimeter
G1 X104.802 Y111.701 E0.01362 ; perimeter
G1 X104.424 Y111.605 E0.01322 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.675 Y111.320 E-0.10030 ; wipe and retract
G1 X104.802 Y111.701 E-0.10617 ; wipe and retract
G1 X104.424 Y111.605 E-0.10310 ; wipe and retract
;WIPE_END
G1 E-2.09043 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X104.746 Y114.556 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.693 Y114.641 E0.00339 ; perimeter
G1 X104.705 Y114.691 E0.00174 ; perimeter
G1 X104.604 Y114.807 E0.00519 ; perimeter
G1 X104.533 Y114.834 E0.00257 ; perimeter
G1 X104.406 Y114.842 E0.00431 ; perimeter
G1 X104.282 Y114.826 E0.00423 ; perimeter
G1 X104.460 Y114.799 E0.00608 ; perimeter
G1 X104.700 Y114.595 E0.01067 ; perimeter
G1 X104.252 Y114.343 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.319 Y113.436 E0.06485 ; perimeter
G1 X105.547 Y112.906 E0.02675 ; perimeter
G1 X105.266 Y112.450 E0.02479 ; perimeter
G1 X104.860 Y112.186 E0.02244 ; perimeter
G1 X104.697 Y112.180 E0.00757 ; perimeter
G1 X104.418 Y112.099 E0.01345 ; perimeter
G1 X104.006 Y112.186 E0.01950 ; perimeter
G1 X103.414 Y112.394 E0.02908 ; perimeter
G1 X102.879 Y112.645 E0.02737 ; perimeter
G1 X102.320 Y113.020 E0.03117 ; perimeter
G1 X102.232 Y113.232 E0.01063 ; perimeter
G1 X102.216 Y113.351 E0.00558 ; perimeter
G1 X102.063 Y113.757 E0.02012 ; perimeter
G1 X101.884 Y113.551 E0.01264 ; perimeter
G1 X101.788 Y113.500 E0.00506 ; perimeter
G1 X101.750 Y113.005 E0.02299 ; perimeter
G1 X101.788 Y112.761 E0.01143 ; perimeter
G1 X101.521 Y112.207 E0.02849 ; perimeter
G1 X100.689 Y111.617 E0.04727 ; perimeter
G1 X99.903 Y111.330 E0.03876 ; perimeter
G1 X99.897 Y111.307 E0.00107 ; perimeter
G1 X100.233 Y111.044 E0.01977 ; perimeter
G1 X100.479 Y110.787 E0.01649 ; perimeter
G1 X100.649 Y110.425 E0.01850 ; perimeter
G1 X100.605 Y110.176 E0.01172 ; perimeter
G1 X100.646 Y110.009 E0.00799 ; perimeter
G1 X100.609 Y109.842 E0.00789 ; perimeter
G1 X100.663 Y109.814 E0.00284 ; perimeter
G1 X101.114 Y109.739 E0.02121 ; perimeter
G1 X101.379 Y109.672 E0.01261 ; perimeter
G1 X101.657 Y109.652 E0.01294 ; perimeter
G1 X101.896 Y109.540 E0.01222 ; perimeter
G1 X102.098 Y109.512 E0.00945 ; perimeter
G1 X102.209 Y109.471 E0.00550 ; perimeter
G1 X102.844 Y109.431 E0.02947 ; perimeter
G1 X102.940 Y109.363 E0.00545 ; perimeter
G1 X103.080 Y109.377 E0.00653 ; perimeter
G1 X103.173 Y109.362 E0.00434 ; perimeter
G1 X103.315 Y109.576 E0.01189 ; perimeter
G1 X103.244 Y109.653 E0.00488 ; perimeter
G1 X103.207 Y109.755 E0.00501 ; perimeter
G1 X103.091 Y109.826 E0.00633 ; perimeter
G1 X102.982 Y109.943 E0.00740 ; perimeter
G1 X102.695 Y110.115 E0.01549 ; perimeter
G1 X102.257 Y110.294 E0.02193 ; perimeter
G1 X101.896 Y110.384 E0.01726 ; perimeter
G1 X101.504 Y110.605 E0.02081 ; perimeter
G1 X101.223 Y110.980 E0.02170 ; perimeter
G1 X101.483 Y111.368 E0.02166 ; perimeter
G1 X101.724 Y111.558 E0.01421 ; perimeter
G1 X102.327 Y111.795 E0.03000 ; perimeter
G1 X102.768 Y111.779 E0.02047 ; perimeter
G1 X103.303 Y111.618 E0.02587 ; perimeter
G1 X103.698 Y111.420 E0.02045 ; perimeter
G1 X103.980 Y111.312 E0.01399 ; perimeter
G1 X104.171 Y111.149 E0.01166 ; perimeter
G1 X104.323 Y110.970 E0.01085 ; perimeter
G1 X104.432 Y110.903 E0.00594 ; perimeter
G1 X104.641 Y110.604 E0.01691 ; perimeter
G1 X104.894 Y110.428 E0.01425 ; perimeter
G1 X104.997 Y110.556 E0.00762 ; perimeter
G1 X105.082 Y111.011 E0.02145 ; perimeter
G1 X105.233 Y111.475 E0.02261 ; perimeter
G1 X105.498 Y111.856 E0.02148 ; perimeter
G1 X105.769 Y112.153 E0.01862 ; perimeter
G1 X106.008 Y112.478 E0.01868 ; perimeter
G1 X106.041 Y112.563 E0.00427 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.153 Y112.847 E0.01275 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.168 Y112.886 E0.00193 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.205 Y112.978 E0.00414 ; perimeter (bridge)
G1 X106.189 Y113.090 E0.00473 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.171 Y113.218 E0.00599 ; perimeter
G1 X105.969 Y113.622 E0.02089 ; perimeter
G1 X105.880 Y113.773 E0.00813 ; perimeter
G1 X105.423 Y114.378 E0.03514 ; perimeter
G1 X105.208 Y114.726 E0.01892 ; perimeter
G1 X105.220 Y114.780 E0.00259 ; perimeter
G1 X105.084 Y114.992 E0.01167 ; perimeter
G1 X104.887 Y115.214 E0.01374 ; perimeter
G1 X104.639 Y115.311 E0.01234 ; perimeter
G1 X104.389 Y115.326 E0.01156 ; perimeter
G1 X104.123 Y115.291 E0.01244 ; perimeter
G1 X103.636 Y115.105 E0.02417 ; perimeter
G1 X103.004 Y114.758 E0.03342 ; perimeter
G1 X102.459 Y114.336 E0.03190 ; perimeter
G1 X102.721 Y114.263 E0.01258 ; perimeter
G1 X103.020 Y114.323 E0.01414 ; perimeter
G1 X103.201 Y114.390 E0.00891 ; perimeter
G1 X103.852 Y114.404 E0.03019 ; perimeter
G1 X104.193 Y114.352 E0.01595 ; perimeter
G1 X104.590 Y114.556 F10800.000 ; move inwards before travel
G1 X104.041 Y114.805 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.335694
G1 F2400.000
G1 X103.865 Y114.785 E0.00431 ; infill
;WIDTH:0.322597
G1 X103.383 Y114.691 E0.01143 ; infill
G1 X104.903 Y114.373 F10800.000 ; move to first infill point
;WIDTH:0.320437
G1 F2400.000
G1 X105.335 Y113.896 E0.01484 ; infill
;WIDTH:0.214664
G1 X105.608 Y113.592 E0.00584 ; infill
;WIDTH:0.232508
G1 X105.673 Y113.462 E0.00229 ; infill
;WIDTH:0.254852
G1 X105.835 Y113.114 E0.00676 ; infill
G1 X105.903 Y112.871 E0.00445 ; infill
G1 X105.922 Y113.176 F10800.000 ; move to first infill point
;WIDTH:0.142375
G1 F2400.000
G1 X105.854 Y112.863 E0.00265 ; infill
G1 X105.736 Y112.627 E0.00218 ; infill
G1 X105.479 Y112.255 E0.00374 ; infill
;WIDTH:0.127658
G1 X105.143 Y111.955 E0.00318 ; infill
G1 X104.144 Y111.714 F10800.000 ; move to first infill point
;WIDTH:0.399504
G1 F2400.000
G1 X103.905 Y111.784 E0.00738 ; infill
;WIDTH:0.388831
G1 X103.660 Y111.885 E0.00761 ; infill
;WIDTH:0.358348
G1 X103.457 Y111.971 E0.00580 ; infill
;WIDTH:0.330525
G1 X102.810 Y112.210 E0.01648 ; infill
G1 X102.082 Y112.816 F10800.000 ; move to first infill point
;WIDTH:0.140392
G1 F2400.000
G1 X102.025 Y113.016 E0.00169 ; infill
;WIDTH:0.107805
G1 X102.017 Y113.066 E0.00027 ; infill
G1 X101.640 Y111.900 F10800.000 ; move to first infill point
;WIDTH:0.225987
G1 F2400.000
G1 X101.247 Y111.605 E0.00748 ; infill
G1 X101.065 Y111.422 E0.00394 ; infill
;WIDTH:0.356349
G1 X100.613 Y110.995 E0.01619 ; infill
G1 X101.452 Y110.121 F10800.000 ; move to first infill point
;WIDTH:0.30206
G1 F2400.000
G1 X102.013 Y109.935 E0.01272 ; infill
G1 X102.851 Y109.730 E0.01860 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.013 Y109.935 E-0.22774 ; wipe and retract
G1 X101.452 Y110.121 E-0.15578 ; wipe and retract
;WIPE_END
G1 E-2.01648 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X102.013 Y107.560 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.859 Y107.571 E0.00523 ; perimeter
G1 X101.369 Y107.476 E0.01690 ; perimeter
G1 X101.621 Y106.970 E0.01913 ; perimeter
G1 X101.868 Y106.662 E0.01335 ; perimeter
G1 X101.909 Y106.424 E0.00817 ; perimeter
G1 X102.002 Y106.181 E0.00882 ; perimeter
G1 X102.003 Y106.039 E0.00482 ; perimeter
G1 X102.178 Y106.277 E0.01000 ; perimeter
G1 X102.197 Y106.331 E0.00195 ; perimeter
G1 X101.735 Y107.045 E0.02878 ; perimeter
G1 X101.985 Y107.508 E0.01778 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.859 Y107.571 E-0.03713 ; wipe and retract
G1 X101.369 Y107.476 E-0.13179 ; wipe and retract
G1 X101.621 Y106.970 E-0.14916 ; wipe and retract
G1 X101.868 Y106.662 E-0.10410 ; wipe and retract
G1 X101.909 Y106.424 E-0.06373 ; wipe and retract
G1 X102.002 Y106.181 E-0.06878 ; wipe and retract
G1 X102.003 Y106.039 E-0.03758 ; wipe and retract
G1 X102.178 Y106.277 E-0.07794 ; wipe and retract
G1 X102.197 Y106.331 E-0.01520 ; wipe and retract
G1 X101.735 Y107.045 E-0.22434 ; wipe and retract
G1 X101.985 Y107.508 E-0.13860 ; wipe and retract
;WIPE_END
G1 E-1.35165 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X100.655 Y99.871 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.614 Y99.769 E0.00372 ; perimeter
G1 X100.625 Y99.706 E0.00217 ; perimeter
G1 X100.644 Y99.812 E0.00366 ; perimeter
G1 X101.460 Y98.525 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X101.498 Y98.451 E0.00280 ; perimeter
G1 X101.567 Y98.523 E0.00336 ; perimeter
G1 X101.520 Y98.524 E0.00157 ; perimeter
G1 X101.633 Y99.004 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.328 Y99.411 E0.02354 ; perimeter
G1 X101.284 Y99.530 E0.00590 ; perimeter
G1 X101.130 Y99.792 E0.01408 ; perimeter
G1 X101.267 Y100.558 E0.03605 ; perimeter
G1 X101.377 Y100.949 E0.01880 ; perimeter
G1 X101.451 Y101.355 E0.01910 ; perimeter
G1 X101.660 Y101.800 E0.02279 ; perimeter
G1 X101.730 Y101.851 E0.00398 ; perimeter
G1 X101.907 Y102.179 E0.01730 ; perimeter
G1 X101.956 Y102.222 E0.00299 ; perimeter
G1 X102.070 Y102.495 E0.01372 ; perimeter
G1 X102.148 Y103.051 E0.02599 ; perimeter
G1 X102.172 Y103.540 E0.02270 ; perimeter
G1 X102.163 Y104.342 E0.03715 ; perimeter
G1 X102.214 Y105.475 E0.05251 ; perimeter
G1 X102.461 Y105.859 E0.02118 ; perimeter
G1 X102.608 Y106.042 E0.01083 ; perimeter
G1 X102.641 Y106.142 E0.00490 ; perimeter
G1 X102.700 Y106.218 E0.00446 ; perimeter
G1 X102.717 Y106.334 E0.00543 ; perimeter
G1 X102.652 Y106.535 E0.00980 ; perimeter
G1 X102.560 Y106.648 E0.00676 ; perimeter
G1 X102.294 Y107.066 E0.02292 ; perimeter
G1 X102.494 Y107.436 E0.01951 ; perimeter
G1 X102.692 Y107.702 E0.01536 ; perimeter
G1 X102.734 Y107.894 E0.00907 ; perimeter
G1 X102.715 Y107.970 E0.00363 ; perimeter
G1 X102.413 Y108.053 E0.01452 ; perimeter
G1 X102.100 Y108.038 E0.01451 ; perimeter
G1 X101.829 Y108.056 E0.01255 ; perimeter
G1 X101.136 Y107.922 E0.03272 ; perimeter
G1 X100.968 Y107.925 E0.00776 ; perimeter
G1 X100.845 Y107.900 E0.00584 ; perimeter
G1 X100.723 Y107.814 E0.00691 ; perimeter
G1 X100.658 Y107.796 E0.00312 ; perimeter
G1 X100.642 Y107.739 E0.00278 ; perimeter
G1 X100.761 Y107.472 E0.01355 ; perimeter
G1 X100.968 Y107.206 E0.01560 ; perimeter
G1 X101.072 Y106.964 E0.01219 ; perimeter
G1 X101.220 Y106.700 E0.01403 ; perimeter
G1 X101.414 Y106.458 E0.01434 ; perimeter
G1 X101.441 Y106.296 E0.00763 ; perimeter
G1 X101.521 Y106.089 E0.01024 ; perimeter
G1 X101.526 Y105.460 E0.02917 ; perimeter
G1 X101.365 Y105.074 E0.01937 ; perimeter
G1 X101.333 Y104.909 E0.00778 ; perimeter
G1 X101.478 Y103.712 E0.05585 ; perimeter
G1 X101.454 Y103.425 E0.01337 ; perimeter
G1 X101.467 Y103.180 E0.01137 ; perimeter
G1 X101.345 Y102.935 E0.01268 ; perimeter
G1 X101.266 Y102.641 E0.01409 ; perimeter
G1 X101.219 Y102.557 E0.00446 ; perimeter
G1 X101.200 Y102.432 E0.00582 ; perimeter
G1 X101.110 Y102.253 E0.00931 ; perimeter
G1 X101.072 Y101.934 E0.01489 ; perimeter
G1 X101.085 Y101.835 E0.00463 ; perimeter
G1 X100.924 Y101.383 E0.02221 ; perimeter
G1 X100.425 Y100.368 E0.05240 ; perimeter
G1 X100.242 Y100.138 E0.01360 ; perimeter
G1 X100.148 Y99.900 E0.01186 ; perimeter
G1 X100.114 Y99.709 E0.00901 ; perimeter
G1 X100.133 Y99.599 E0.00515 ; perimeter
G1 X100.228 Y99.427 E0.00911 ; perimeter
G1 X100.390 Y99.220 E0.01215 ; perimeter
G1 X100.543 Y99.118 E0.00855 ; perimeter
G1 X100.736 Y98.878 E0.01426 ; perimeter
G1 X100.987 Y98.391 E0.02536 ; perimeter
G1 X100.915 Y98.201 E0.00941 ; perimeter
G1 X100.898 Y97.903 E0.01381 ; perimeter
G1 X100.842 Y97.507 E0.01853 ; perimeter
G1 X100.849 Y97.296 E0.00978 ; perimeter
G1 X100.906 Y97.082 E0.01027 ; perimeter
G1 X100.979 Y96.992 E0.00538 ; perimeter
G1 X101.220 Y97.059 E0.01160 ; perimeter
G1 X101.531 Y97.406 E0.02157 ; perimeter
G1 X101.605 Y97.518 E0.00621 ; perimeter
G1 X101.671 Y97.678 E0.00803 ; perimeter
G1 X101.768 Y97.821 E0.00800 ; perimeter
G1 X101.837 Y98.108 E0.01366 ; perimeter
G1 X102.027 Y98.308 E0.01280 ; perimeter
G1 X102.052 Y98.433 E0.00592 ; perimeter
G1 X102.212 Y98.574 E0.00988 ; perimeter
G1 X102.217 Y98.672 E0.00456 ; perimeter
G1 X102.006 Y98.804 E0.01152 ; perimeter
G1 X101.860 Y98.934 E0.00904 ; perimeter
G1 X101.752 Y99.002 E0.00591 ; perimeter
G1 X101.693 Y99.003 E0.00275 ; perimeter
G1 X101.255 Y98.875 F10800.000 ; move inwards before travel
G1 X101.274 Y98.769 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.383847
G1 F2400.000
G1 X101.078 Y99.081 E0.01045 ; infill
;WIDTH:0.356271
G1 X100.963 Y99.237 E0.00505 ; infill
G1 X100.829 Y99.475 E0.00712 ; infill
G1 X100.757 Y100.092 F10800.000 ; move to first infill point
;WIDTH:0.356722
G1 F2400.000
G1 X100.816 Y100.272 E0.00492 ; infill
;WIDTH:0.240403
G1 X101.010 Y100.828 E0.00968 ; infill
;WIDTH:0.131642
G1 X101.169 Y101.281 E0.00354 ; infill
G1 X101.334 Y101.717 F10800.000 ; move to first infill point
;WIDTH:0.304587
G1 F2400.000
G1 X101.469 Y102.145 E0.00978 ; infill
G1 X101.550 Y102.300 E0.00380 ; infill
;WIDTH:0.312578
G1 X101.566 Y102.339 E0.00095 ; infill
;WIDTH:0.335479
G1 X101.587 Y102.402 E0.00161 ; infill
;WIDTH:0.347639
G1 X101.676 Y102.603 E0.00556 ; infill
G1 X101.759 Y102.939 E0.00877 ; infill
;WIDTH:0.251598
G1 X101.810 Y103.134 E0.00350 ; infill
G1 X101.824 Y103.730 E0.01034 ; infill
;WIDTH:0.285795
G1 X101.804 Y104.037 E0.00623 ; infill
;WIDTH:0.321049
G1 X101.783 Y104.353 E0.00731 ; infill
;WIDTH:0.364535
G1 X101.763 Y104.894 E0.01448 ; infill
G1 X101.817 Y105.162 E0.00731 ; infill
;WIDTH:0.252745
G1 X101.864 Y105.372 E0.00376 ; infill
G1 X101.871 Y105.555 E0.00319 ; infill
;WIDTH:0.271245
G1 X101.911 Y105.814 E0.00498 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.871 Y105.555 E-0.06923 ; wipe and retract
;WIPE_END
G1 E-2.33077 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X107.965 Y99.652 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.904 Y99.399 E0.01205 ; perimeter
G1 X107.879 Y99.392 E0.00119 ; perimeter
G1 X108.008 Y99.336 E0.00651 ; perimeter
G1 X108.137 Y99.342 E0.00599 ; perimeter
G1 X108.366 Y99.305 E0.01074 ; perimeter
G1 X108.685 Y99.210 E0.01543 ; perimeter
G1 X108.920 Y99.227 E0.01092 ; perimeter
G1 X109.050 Y99.275 E0.00643 ; perimeter
G1 X109.180 Y99.387 E0.00794 ; perimeter
G1 X109.277 Y99.543 E0.00851 ; perimeter
G1 X109.307 Y99.697 E0.00728 ; perimeter
G1 X109.255 Y99.936 E0.01130 ; perimeter
G1 X109.187 Y99.999 E0.00430 ; perimeter
G1 X108.854 Y100.038 E0.01554 ; perimeter
G1 X108.373 Y99.912 E0.02303 ; perimeter
G1 X108.147 Y99.733 E0.01335 ; perimeter
G1 X108.014 Y99.683 E0.00660 ; perimeter
G1 X108.102 Y99.431 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.904 Y99.399 E-0.08038 ; wipe and retract
G1 X107.879 Y99.392 E-0.00677 ; wipe and retract
G1 X108.008 Y99.336 E-0.03710 ; wipe and retract
G1 X108.137 Y99.342 E-0.03411 ; wipe and retract
G1 X108.366 Y99.305 E-0.06121 ; wipe and retract
G1 X108.685 Y99.210 E-0.08788 ; wipe and retract
G1 X108.920 Y99.227 E-0.06220 ; wipe and retract
G1 X109.050 Y99.275 E-0.03665 ; wipe and retract
G1 X109.180 Y99.387 E-0.04523 ; wipe and retract
G1 X109.277 Y99.543 E-0.04848 ; wipe and retract
G1 X109.307 Y99.697 E-0.04150 ; wipe and retract
G1 X109.255 Y99.936 E-0.06439 ; wipe and retract
G1 X109.187 Y99.999 E-0.02451 ; wipe and retract
G1 X108.854 Y100.038 E-0.08854 ; wipe and retract
G1 X108.373 Y99.912 E-0.13118 ; wipe and retract
G1 X108.147 Y99.733 E-0.07608 ; wipe and retract
G1 X108.014 Y99.683 E-0.03758 ; wipe and retract
;WIPE_END
G1 E-1.43621 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X104.572 Y97.883 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.117 Y97.977 E0.01574 ; perimeter
G1 X104.138 Y97.884 E0.00322 ; perimeter
G1 X104.203 Y97.806 E0.00344 ; perimeter
G1 X104.245 Y97.552 E0.00874 ; perimeter
G1 X104.530 Y97.841 E0.01373 ; perimeter
G1 X103.558 Y98.590 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.464 Y98.508 E0.00581 ; perimeter
G1 X103.490 Y98.353 E0.00726 ; perimeter
G1 X103.513 Y98.329 E0.00159 ; perimeter
G1 X103.603 Y98.060 E0.01311 ; perimeter
G1 X103.694 Y97.662 E0.01891 ; perimeter
G1 X103.749 Y97.596 E0.00400 ; perimeter
G1 X103.806 Y97.254 E0.01608 ; perimeter
G1 X103.864 Y97.062 E0.00926 ; perimeter
G1 X103.913 Y96.970 E0.00487 ; perimeter
G1 X104.034 Y96.868 E0.00731 ; perimeter
G1 X104.176 Y96.869 E0.00658 ; perimeter
G1 X104.317 Y96.937 E0.00722 ; perimeter
G1 X104.887 Y97.516 E0.03762 ; perimeter
G1 X105.451 Y97.806 E0.02941 ; perimeter
G1 X105.560 Y97.834 E0.00520 ; perimeter
G1 X106.253 Y98.127 E0.03487 ; perimeter
G1 X106.302 Y98.204 E0.00422 ; perimeter
G1 X106.550 Y98.387 E0.01425 ; perimeter
G1 X106.578 Y98.453 E0.00331 ; perimeter
G1 X106.815 Y98.775 E0.01852 ; perimeter
G1 X106.811 Y98.840 E0.00305 ; perimeter
G1 X107.086 Y99.206 E0.02121 ; perimeter
G1 X106.871 Y99.258 E0.01025 ; perimeter
G1 X106.641 Y99.223 E0.01078 ; perimeter
G1 X106.595 Y99.232 E0.00214 ; perimeter
G1 X106.320 Y99.158 E0.01322 ; perimeter
G1 X105.990 Y98.971 E0.01757 ; perimeter
G1 X105.726 Y98.691 E0.01780 ; perimeter
G1 X105.346 Y98.410 E0.02192 ; perimeter
G1 X104.956 Y98.345 E0.01829 ; perimeter
G1 X104.583 Y98.366 E0.01731 ; perimeter
G1 X104.179 Y98.457 E0.01919 ; perimeter
G1 X103.991 Y98.470 E0.00876 ; perimeter
G1 X103.709 Y98.597 E0.01431 ; perimeter
G1 X103.618 Y98.593 E0.00422 ; perimeter
G1 X103.541 Y98.466 F10800.000 ; move inwards before travel
G1 X104.858 Y97.798 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.138983
G1 F2400.000
G1 X104.972 Y97.882 E0.00113 ; infill
;WIDTH:0.169998
G1 X105.201 Y98.050 E0.00300 ; infill
G1 X105.480 Y98.131 E0.00307 ; infill
;WIDTH:0.213466
G1 X105.641 Y98.223 E0.00263 ; infill
;WIDTH:0.256934
G1 X105.802 Y98.314 E0.00330 ; infill
;WIDTH:0.300401
G1 X105.963 Y98.406 E0.00397 ; infill
;WIDTH:0.312005
G1 X106.043 Y98.479 E0.00242 ; infill
;WIDTH:0.355921
G1 X106.227 Y98.643 E0.00640 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.043 Y98.479 E-0.06493 ; wipe and retract
;WIPE_END
G1 E-2.33507 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X108.321 Y99.563 ; move to first infill point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.143094
G1 F2400.000
G1 X109.053 Y99.730 E0.00625 ; infill
G1 X109.046 Y99.765 F10800.000 ; move to first infill point
;WIDTH:0.339918
G1 F2400.000
G1 X108.845 Y99.624 E0.00606 ; infill
G1 X108.385 Y99.546 E0.01151 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.845 Y99.624 E-0.12294 ; wipe and retract
G1 X109.046 Y99.765 E-0.06478 ; wipe and retract
;WIPE_END
G1 E-2.21228 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X111.387 Y101.232 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.779 Y101.415 E0.01462 ; perimeter
G1 X111.470 Y101.554 E0.01147 ; perimeter
G1 X111.439 Y101.490 E0.00239 ; perimeter
G1 X111.399 Y101.291 E0.00686 ; perimeter
G1 X110.915 Y101.326 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.702 Y101.031 E0.01684 ; perimeter
G1 X110.681 Y100.864 E0.00783 ; perimeter
G1 X110.648 Y100.779 E0.00422 ; perimeter
G1 X110.652 Y100.721 E0.00270 ; perimeter
G1 X110.672 Y100.687 E0.00179 ; perimeter
G1 X110.831 Y100.627 E0.00789 ; perimeter
G1 X111.220 Y100.648 E0.01804 ; perimeter
G1 X111.510 Y100.757 E0.01436 ; perimeter
G1 X112.101 Y101.033 E0.03018 ; perimeter
G1 X112.458 Y101.272 E0.01992 ; perimeter
G1 X112.602 Y101.418 E0.00949 ; perimeter
G1 X112.722 Y101.619 E0.01085 ; perimeter
G1 X112.504 Y101.695 E0.01073 ; perimeter
G1 X112.118 Y101.757 E0.01806 ; perimeter
G1 X112.042 Y101.833 E0.00499 ; perimeter
G1 X111.650 Y102.001 E0.01976 ; perimeter
G1 X111.616 Y102.051 E0.00279 ; perimeter
G1 X111.389 Y102.195 E0.01247 ; perimeter
G1 X111.328 Y102.205 E0.00287 ; perimeter
G1 X111.284 Y102.191 E0.00215 ; perimeter
G1 X111.116 Y101.984 E0.01237 ; perimeter
G1 X111.114 Y101.927 E0.00262 ; perimeter
G1 X110.961 Y101.606 E0.01645 ; perimeter
G1 X110.926 Y101.385 E0.01037 ; perimeter
G1 X111.097 Y101.012 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.702 Y101.031 E-0.11056 ; wipe and retract
G1 X110.681 Y100.864 E-0.04460 ; wipe and retract
G1 X110.648 Y100.779 E-0.02406 ; wipe and retract
G1 X110.652 Y100.721 E-0.01540 ; wipe and retract
G1 X110.672 Y100.687 E-0.01021 ; wipe and retract
G1 X110.831 Y100.627 E-0.04497 ; wipe and retract
G1 X111.220 Y100.648 E-0.10278 ; wipe and retract
G1 X111.510 Y100.757 E-0.08180 ; wipe and retract
G1 X112.101 Y101.033 E-0.17193 ; wipe and retract
G1 X112.458 Y101.272 E-0.11350 ; wipe and retract
G1 X112.602 Y101.418 E-0.05407 ; wipe and retract
G1 X112.722 Y101.619 E-0.06179 ; wipe and retract
G1 X112.504 Y101.695 E-0.06111 ; wipe and retract
G1 X112.118 Y101.757 E-0.10291 ; wipe and retract
G1 X112.042 Y101.833 E-0.02845 ; wipe and retract
G1 X111.650 Y102.001 E-0.11256 ; wipe and retract
G1 X111.616 Y102.051 E-0.01590 ; wipe and retract
G1 X111.389 Y102.195 E-0.07103 ; wipe and retract
G1 X111.328 Y102.205 E-0.01635 ; wipe and retract
G1 X111.284 Y102.191 E-0.01222 ; wipe and retract
G1 X111.116 Y101.984 E-0.07047 ; wipe and retract
G1 X111.114 Y101.927 E-0.01494 ; wipe and retract
G1 X110.961 Y101.606 E-0.09374 ; wipe and retract
G1 X110.926 Y101.385 E-0.05906 ; wipe and retract
;WIPE_END
G1 E-0.90557 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X113.436 Y102.000 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.493 Y102.007 E0.00265 ; perimeter
G1 X113.643 Y101.883 E0.00903 ; perimeter
G1 X114.037 Y101.956 E0.01858 ; perimeter
G1 X114.278 Y102.090 E0.01276 ; perimeter
G1 X114.565 Y102.332 E0.01739 ; perimeter
G1 X114.654 Y102.465 E0.00741 ; perimeter
G1 X114.857 Y102.585 E0.01093 ; perimeter
G1 X115.229 Y102.907 E0.02277 ; perimeter
G1 X115.342 Y103.085 E0.00977 ; perimeter
G1 X115.367 Y103.242 E0.00739 ; perimeter
G1 X115.346 Y103.450 E0.00968 ; perimeter
G1 X115.313 Y103.510 E0.00316 ; perimeter
G1 X115.200 Y103.633 E0.00773 ; perimeter
G1 X115.092 Y103.660 E0.00519 ; perimeter
G1 X114.922 Y103.648 E0.00790 ; perimeter
G1 X114.690 Y103.508 E0.01254 ; perimeter
G1 X114.414 Y103.239 E0.01788 ; perimeter
G1 X114.386 Y103.180 E0.00300 ; perimeter
G1 X113.846 Y102.775 E0.03124 ; perimeter
G1 X113.648 Y102.599 E0.01229 ; perimeter
G1 X113.495 Y102.399 E0.01167 ; perimeter
G1 X113.462 Y102.297 E0.00496 ; perimeter
G1 X113.399 Y102.200 E0.00536 ; perimeter
G1 X113.428 Y102.058 E0.00671 ; perimeter
G1 X113.484 Y102.032 F10800.000 ; move inwards before travel
G1 X113.706 Y102.142 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29695
G1 F2400.000
G1 X114.268 Y102.598 E0.01529 ; infill
G1 X114.421 Y102.750 E0.00456 ; infill
;WIDTH:0.318044
G1 X114.659 Y102.914 E0.00662 ; infill
;WIDTH:0.327435
G1 X115.109 Y103.376 E0.01525 ; infill
G1 X115.409 Y104.671 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.563 Y104.654 E0.00720 ; perimeter
G1 X115.656 Y104.685 E0.00453 ; perimeter
G1 X115.829 Y104.936 E0.01415 ; perimeter
G1 X115.880 Y105.191 E0.01202 ; perimeter
G1 X115.880 Y105.275 E0.00391 ; perimeter
G1 X115.815 Y105.651 E0.01765 ; perimeter
G1 X115.857 Y106.076 E0.01980 ; perimeter
G1 X115.889 Y106.184 E0.00523 ; perimeter
G1 X115.914 Y106.530 E0.01605 ; perimeter
G1 X115.885 Y106.770 E0.01118 ; perimeter
G1 X115.761 Y107.043 E0.01390 ; perimeter
G1 X115.630 Y107.163 E0.00822 ; perimeter
G1 X115.522 Y107.205 E0.00536 ; perimeter
G1 X115.427 Y107.187 E0.00446 ; perimeter
G1 X115.288 Y107.091 E0.00782 ; perimeter
G1 X115.173 Y106.891 E0.01071 ; perimeter
G1 X115.119 Y106.731 E0.00782 ; perimeter
G1 X115.100 Y106.491 E0.01114 ; perimeter
G1 X115.173 Y106.027 E0.02175 ; perimeter
G1 X115.177 Y105.588 E0.02035 ; perimeter
G1 X115.155 Y105.136 E0.02097 ; perimeter
G1 X115.228 Y104.852 E0.01359 ; perimeter
G1 X115.363 Y104.710 E0.00907 ; perimeter
G1 X115.535 Y104.761 F10800.000 ; move inwards before travel
G1 X115.483 Y104.923 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.280897
G1 F2400.000
G1 X115.520 Y105.228 E0.00607 ; infill
G1 X115.510 Y105.413 E0.00366 ; infill
;WIDTH:0.243212
G1 X115.500 Y105.579 E0.00278 ; infill
;WIDTH:0.206228
G1 X115.495 Y105.628 E0.00067 ; infill
;WIDTH:0.198038
G1 X115.526 Y106.931 E0.01681 ; infill
G1 X115.533 Y106.925 F10800.000 ; move to first infill point
;WIDTH:0.342998
G1 F2400.000
G1 X115.505 Y106.652 E0.00684 ; infill
G1 X115.518 Y106.252 E0.01000 ; infill
G1 X115.621 Y106.128 F10800.000 ; move to first infill point
;WIDTH:0.173644
G1 F2400.000
G1 X115.495 Y106.941 E0.00894 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.621 Y106.128 E-0.21703 ; wipe and retract
;WIPE_END
G1 E-2.18297 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X115.694 Y110.345 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.791 Y110.435 E0.00611 ; perimeter
G1 X115.878 Y110.692 E0.01258 ; perimeter
G1 X115.859 Y110.917 E0.01047 ; perimeter
G1 X115.787 Y111.058 E0.00732 ; perimeter
G1 X115.658 Y111.166 E0.00779 ; perimeter
G1 X115.546 Y111.195 E0.00537 ; perimeter
G1 X115.433 Y111.189 E0.00523 ; perimeter
G1 X115.264 Y111.095 E0.00896 ; perimeter
G1 X115.189 Y110.975 E0.00658 ; perimeter
G1 X115.153 Y110.801 E0.00820 ; perimeter
G1 X115.160 Y110.661 E0.00652 ; perimeter
G1 X115.259 Y110.414 E0.01232 ; perimeter
G1 X115.307 Y110.364 E0.00323 ; perimeter
G1 X115.428 Y110.312 E0.00609 ; perimeter
G1 X115.638 Y110.324 E0.00974 ; perimeter
G1 X115.700 Y110.477 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.791 Y110.435 E-0.04977 ; wipe and retract
G1 X115.878 Y110.692 E-0.07167 ; wipe and retract
G1 X115.859 Y110.917 E-0.05963 ; wipe and retract
G1 X115.787 Y111.058 E-0.04173 ; wipe and retract
G1 X115.658 Y111.166 E-0.04439 ; wipe and retract
G1 X115.546 Y111.195 E-0.03060 ; wipe and retract
G1 X115.433 Y111.189 E-0.02981 ; wipe and retract
G1 X115.264 Y111.095 E-0.05103 ; wipe and retract
G1 X115.189 Y110.975 E-0.03749 ; wipe and retract
G1 X115.153 Y110.801 E-0.04674 ; wipe and retract
G1 X115.160 Y110.661 E-0.03715 ; wipe and retract
G1 X115.259 Y110.414 E-0.07017 ; wipe and retract
G1 X115.307 Y110.364 E-0.01841 ; wipe and retract
G1 X115.428 Y110.312 E-0.03471 ; wipe and retract
G1 X115.638 Y110.324 E-0.05548 ; wipe and retract
;WIPE_END
G1 E-1.72122 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X111.696 Y115.628 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.764 Y115.533 E0.00541 ; perimeter
G1 X111.913 Y115.422 E0.00862 ; perimeter
G1 X112.062 Y115.373 E0.00730 ; perimeter
G1 X112.173 Y115.383 E0.00513 ; perimeter
G1 X112.639 Y115.314 E0.02184 ; perimeter
G1 X112.942 Y115.292 E0.01404 ; perimeter
G1 X113.113 Y115.301 E0.00796 ; perimeter
G1 X113.357 Y115.357 E0.01160 ; perimeter
G1 X113.750 Y115.539 E0.02005 ; perimeter
G1 X113.635 Y115.796 E0.01303 ; perimeter
G1 X113.371 Y116.024 E0.01619 ; perimeter
G1 X113.156 Y116.101 E0.01054 ; perimeter
G1 X112.744 Y116.142 E0.01922 ; perimeter
G1 X111.901 Y116.130 E0.03905 ; perimeter
G1 X111.834 Y116.076 E0.00398 ; perimeter
G1 X111.750 Y115.894 E0.00929 ; perimeter
G1 X111.688 Y115.823 E0.00438 ; perimeter
G1 X111.693 Y115.688 E0.00623 ; perimeter
G1 X111.811 Y115.608 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.764 Y115.533 E-0.04492 ; wipe and retract
G1 X111.913 Y115.422 E-0.04909 ; wipe and retract
G1 X112.062 Y115.373 E-0.04159 ; wipe and retract
G1 X112.173 Y115.383 E-0.02925 ; wipe and retract
G1 X112.639 Y115.314 E-0.12443 ; wipe and retract
G1 X112.942 Y115.292 E-0.07999 ; wipe and retract
G1 X113.113 Y115.301 E-0.04532 ; wipe and retract
G1 X113.357 Y115.357 E-0.06606 ; wipe and retract
G1 X113.750 Y115.539 E-0.11420 ; wipe and retract
G1 X113.635 Y115.796 E-0.07424 ; wipe and retract
G1 X113.371 Y116.024 E-0.09222 ; wipe and retract
G1 X113.156 Y116.101 E-0.06002 ; wipe and retract
G1 X112.744 Y116.142 E-0.10951 ; wipe and retract
G1 X111.901 Y116.130 E-0.22245 ; wipe and retract
G1 X111.834 Y116.076 E-0.02268 ; wipe and retract
G1 X111.750 Y115.894 E-0.05290 ; wipe and retract
G1 X111.688 Y115.823 E-0.02493 ; wipe and retract
G1 X111.693 Y115.688 E-0.03547 ; wipe and retract
;WIPE_END
G1 E-1.11073 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 X114.276 Y115.644 ; move to first perimeter point
G1 Z9.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.180 Y115.515 E0.00747 ; perimeter
G1 X114.374 Y115.389 E0.01070 ; perimeter
G1 X114.460 Y115.243 E0.00784 ; perimeter
G1 X114.683 Y115.043 E0.01388 ; perimeter
G1 X114.988 Y114.852 E0.01669 ; perimeter
G1 X115.211 Y114.816 E0.01044 ; perimeter
G1 X115.372 Y114.873 E0.00793 ; perimeter
G1 X115.476 Y114.942 E0.00581 ; perimeter
G1 X115.526 Y115.014 E0.00405 ; perimeter
G1 X115.562 Y115.117 E0.00503 ; perimeter
G1 X115.573 Y115.244 E0.00591 ; perimeter
G1 X115.543 Y115.380 E0.00648 ; perimeter
G1 X115.495 Y115.472 E0.00480 ; perimeter
G1 X115.391 Y115.592 E0.00736 ; perimeter
G1 X115.234 Y115.717 E0.00927 ; perimeter
G1 X115.051 Y115.818 E0.00969 ; perimeter
G1 X114.763 Y115.861 E0.01351 ; perimeter
G1 X114.576 Y115.834 E0.00873 ; perimeter
G1 X114.452 Y115.774 E0.00638 ; perimeter
G1 X114.325 Y115.679 E0.00737 ; perimeter
G1 X114.321 Y115.490 F10800.000 ; move inwards before travel
G1 X114.565 Y115.553 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.177076
G1 F2400.000
G1 X114.931 Y115.443 E0.00426 ; infill
;WIDTH:0.208218
G1 X115.296 Y115.333 E0.00525 ; infill
G1 X115.306 Y115.314 F10800.000 ; move to first infill point
;WIDTH:0.315125
G1 F2400.000
G1 X114.565 Y115.540 E0.01754 ; infill
G1 X115.151 Y115.238 F10800.000 ; move to first infill point
;WIDTH:0.384417
G1 F2400.000
G1 X115.157 Y115.231 E0.00025 ; infill
G1 X113.367 Y115.723 F10800.000 ; move to first infill point
;WIDTH:0.370457
G1 F2400.000
G1 X112.946 Y115.706 E0.01148 ; infill
G1 X112.442 Y115.746 E0.01376 ; infill
;WIDTH:0.356962
G1 X112.200 Y115.764 E0.00635 ; infill
;WIDTH:0.322758
G1 X112.111 Y115.761 E0.00207 ; infill
G1 X111.953 Y115.693 E0.00400 ; infill
;LAYER_CHANGE
;Z:10
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;10
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.111 Y115.761 E-0.04538 ; wipe and retract
G1 X112.200 Y115.764 E-0.02350 ; wipe and retract
;WIPE_END
G1 E-2.33113 F2400.000 ; retract
G1 Z9.875 F10800.000 ; lift Z
G1 Z10.000 ; move to next layer (49)
;AFTER_LAYER_CHANGE
;10
G1 Z10.075 ; lift Z
G1 X102.418 Y107.693 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.946 Y107.595 E0.01633 ; perimeter
G1 X101.730 Y107.503 E0.00795 ; perimeter
G1 X101.580 Y107.467 E0.00522 ; perimeter
G1 X102.030 Y106.911 E0.02420 ; perimeter
G1 X102.164 Y106.219 E0.02387 ; perimeter
G1 X102.314 Y106.343 E0.00659 ; perimeter
G1 X102.363 Y106.411 E0.00283 ; perimeter
G1 X102.197 Y106.942 E0.01881 ; perimeter
G1 X102.313 Y107.546 E0.02084 ; perimeter
G1 X102.383 Y107.645 E0.00408 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.946 Y107.595 E-0.11615 ; wipe and retract
G1 X101.730 Y107.503 E-0.06199 ; wipe and retract
G1 X101.580 Y107.467 E-0.04071 ; wipe and retract
G1 X102.030 Y106.911 E-0.18868 ; wipe and retract
G1 X102.164 Y106.219 E-0.18613 ; wipe and retract
G1 X102.314 Y106.343 E-0.05137 ; wipe and retract
G1 X102.363 Y106.411 E-0.02207 ; wipe and retract
G1 X102.197 Y106.942 E-0.14666 ; wipe and retract
G1 X102.313 Y107.546 E-0.16249 ; wipe and retract
G1 X102.383 Y107.645 E-0.03183 ; wipe and retract
;WIPE_END
G1 E-1.39193 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X100.695 Y100.064 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.631 Y100.019 E0.00266 ; perimeter
G1 X100.465 Y99.806 E0.00914 ; perimeter
G1 X100.498 Y99.749 E0.00221 ; perimeter
G1 X100.680 Y99.628 E0.00740 ; perimeter
G1 X100.690 Y100.004 E0.01273 ; perimeter
G1 X101.037 Y98.339 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.922 Y98.034 E0.01512 ; perimeter
G1 X100.915 Y97.902 E0.00611 ; perimeter
G1 X100.801 Y97.614 E0.01437 ; perimeter
G1 X100.773 Y97.413 E0.00941 ; perimeter
G1 X100.727 Y97.260 E0.00737 ; perimeter
G1 X100.777 Y96.870 E0.01820 ; perimeter
G1 X100.767 Y96.809 E0.00285 ; perimeter
G1 X100.868 Y96.703 E0.00679 ; perimeter
G1 X101.005 Y96.664 E0.00663 ; perimeter
G1 X101.093 Y96.695 E0.00433 ; perimeter
G1 X101.265 Y96.874 E0.01147 ; perimeter
G1 X101.430 Y97.162 E0.01541 ; perimeter
G1 X101.493 Y97.237 E0.00451 ; perimeter
G1 X101.667 Y97.630 E0.01990 ; perimeter
G1 X101.779 Y98.096 E0.02220 ; perimeter
G1 X101.838 Y98.414 E0.01502 ; perimeter
G1 X101.751 Y98.693 E0.01353 ; perimeter
G1 X101.419 Y99.073 E0.02335 ; perimeter
G1 X101.299 Y99.396 E0.01600 ; perimeter
G1 X101.229 Y99.490 E0.00540 ; perimeter
G1 X101.163 Y99.666 E0.00870 ; perimeter
G1 X101.172 Y99.986 E0.01486 ; perimeter
G1 X101.286 Y100.460 E0.02254 ; perimeter
G1 X101.684 Y101.675 E0.05924 ; perimeter
G1 X101.861 Y101.994 E0.01692 ; perimeter
G1 X101.990 Y102.364 E0.01812 ; perimeter
G1 X102.032 Y102.709 E0.01613 ; perimeter
G1 X101.987 Y102.986 E0.01296 ; perimeter
G1 X102.048 Y103.342 E0.01674 ; perimeter
G1 X102.064 Y103.666 E0.01502 ; perimeter
G1 X102.125 Y103.855 E0.00919 ; perimeter
G1 X102.142 Y104.325 E0.02179 ; perimeter
G1 X102.203 Y104.490 E0.00817 ; perimeter
G1 X102.230 Y105.419 E0.04304 ; perimeter
G1 X102.457 Y105.835 E0.02197 ; perimeter
G1 X102.671 Y106.012 E0.01286 ; perimeter
G1 X102.856 Y106.274 E0.01484 ; perimeter
G1 X102.876 Y106.383 E0.00515 ; perimeter
G1 X102.693 Y106.970 E0.02847 ; perimeter
G1 X102.767 Y107.352 E0.01803 ; perimeter
G1 X103.022 Y107.709 E0.02034 ; perimeter
G1 X103.177 Y108.181 E0.02301 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.211 Y108.284 E0.00454 ; perimeter (bridge)
G1 X103.167 Y108.358 E0.00361 ; perimeter (bridge)
G1 X103.135 Y108.351 E0.00134 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.837 Y108.279 E0.01422 ; perimeter
G1 X102.651 Y108.169 E0.01001 ; perimeter
G1 X102.412 Y108.178 E0.01107 ; perimeter
G1 X102.245 Y108.159 E0.00780 ; perimeter
G1 X102.100 Y108.113 E0.00702 ; perimeter
G1 X101.806 Y108.060 E0.01385 ; perimeter
G1 X101.578 Y107.962 E0.01151 ; perimeter
G1 X101.317 Y107.900 E0.01240 ; perimeter
G1 X101.004 Y107.752 E0.01603 ; perimeter
G1 X100.959 Y107.600 E0.00732 ; perimeter
G1 X101.145 Y107.237 E0.01889 ; perimeter
G1 X101.582 Y106.699 E0.03211 ; perimeter
G1 X101.682 Y106.216 E0.02284 ; perimeter
G1 X101.691 Y105.637 E0.02680 ; perimeter
G1 X101.618 Y105.433 E0.01004 ; perimeter
G1 X101.404 Y105.057 E0.02004 ; perimeter
G1 X101.372 Y104.881 E0.00828 ; perimeter
G1 X101.415 Y104.479 E0.01875 ; perimeter
G1 X101.474 Y104.276 E0.00978 ; perimeter
G1 X101.531 Y103.670 E0.02822 ; perimeter
G1 X101.546 Y103.127 E0.02514 ; perimeter
G1 X101.327 Y102.668 E0.02355 ; perimeter
G1 X101.160 Y102.466 E0.01212 ; perimeter
G1 X101.153 Y102.415 E0.00242 ; perimeter
G1 X100.992 Y102.095 E0.01660 ; perimeter
G1 X100.921 Y101.711 E0.01808 ; perimeter
G1 X100.740 Y101.220 E0.02423 ; perimeter
G1 X100.728 Y101.111 E0.00508 ; perimeter
G1 X100.379 Y100.431 E0.03540 ; perimeter
G1 X100.298 Y100.374 E0.00459 ; perimeter
G1 X100.033 Y100.043 E0.01965 ; perimeter
G1 X99.960 Y99.763 E0.01339 ; perimeter
G1 X100.077 Y99.493 E0.01365 ; perimeter
G1 X100.187 Y99.378 E0.00735 ; perimeter
G1 X100.498 Y99.170 E0.01735 ; perimeter
G1 X100.833 Y98.879 E0.02054 ; perimeter
G1 X100.942 Y98.636 E0.01232 ; perimeter
G1 X100.938 Y98.545 E0.00425 ; perimeter
G1 X101.011 Y98.393 E0.00778 ; perimeter
G1 X101.295 Y98.139 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.922 Y98.034 E-0.09770 ; wipe and retract
G1 X100.915 Y97.902 E-0.03480 ; wipe and retract
G1 X100.801 Y97.614 E-0.08188 ; wipe and retract
G1 X100.773 Y97.413 E-0.05361 ; wipe and retract
G1 X100.727 Y97.260 E-0.04201 ; wipe and retract
G1 X100.777 Y96.870 E-0.10371 ; wipe and retract
G1 X100.767 Y96.809 E-0.01624 ; wipe and retract
G1 X100.868 Y96.703 E-0.03871 ; wipe and retract
G1 X101.005 Y96.664 E-0.03774 ; wipe and retract
G1 X101.093 Y96.695 E-0.02464 ; wipe and retract
G1 X101.265 Y96.874 E-0.06532 ; wipe and retract
G1 X101.430 Y97.162 E-0.08780 ; wipe and retract
G1 X101.493 Y97.237 E-0.02572 ; wipe and retract
G1 X101.667 Y97.630 E-0.11334 ; wipe and retract
G1 X101.779 Y98.096 E-0.12645 ; wipe and retract
G1 X101.838 Y98.414 E-0.08554 ; wipe and retract
G1 X101.751 Y98.693 E-0.07709 ; wipe and retract
G1 X101.419 Y99.073 E-0.13300 ; wipe and retract
G1 X101.299 Y99.396 E-0.09115 ; wipe and retract
G1 X101.229 Y99.490 E-0.03075 ; wipe and retract
G1 X101.163 Y99.666 E-0.04956 ; wipe and retract
G1 X101.172 Y99.986 E-0.08466 ; wipe and retract
G1 X101.286 Y100.460 E-0.12842 ; wipe and retract
G1 X101.684 Y101.675 E-0.33748 ; wipe and retract
G1 X101.861 Y101.994 E-0.09638 ; wipe and retract
G1 X101.990 Y102.364 E-0.10323 ; wipe and retract
G1 X102.032 Y102.709 E-0.09190 ; wipe and retract
G1 X102.019 Y102.789 E-0.02117 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X104.714 Y111.198 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.852 Y111.707 E0.01784 ; perimeter
G1 X104.885 Y111.749 E0.00182 ; perimeter
G1 X104.530 Y111.643 E0.01256 ; perimeter
G1 X104.291 Y111.653 E0.00809 ; perimeter
G1 X104.602 Y111.350 E0.01469 ; perimeter
G1 X104.678 Y111.247 E0.00434 ; perimeter
G1 X105.844 Y112.748 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X105.981 Y112.875 E0.00634 ; perimeter
G1 X105.991 Y112.913 E0.00133 ; perimeter
G1 X105.945 Y113.003 E0.00343 ; perimeter
G1 X105.866 Y112.804 E0.00725 ; perimeter
G1 X105.418 Y112.982 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.292 Y112.665 E0.01579 ; perimeter
G1 X104.930 Y112.265 E0.02498 ; perimeter
G1 X104.469 Y112.128 E0.02229 ; perimeter
G1 X104.044 Y112.146 E0.01969 ; perimeter
G1 X103.484 Y112.321 E0.02721 ; perimeter
G1 X102.887 Y112.557 E0.02973 ; perimeter
G1 X102.526 Y112.794 E0.02000 ; perimeter
G1 X102.075 Y112.954 E0.02217 ; perimeter
G1 X102.022 Y112.876 E0.00436 ; perimeter
G1 X102.008 Y112.753 E0.00576 ; perimeter
G1 X101.707 Y112.156 E0.03097 ; perimeter
G1 X101.052 Y111.579 E0.04044 ; perimeter
G1 X101.001 Y111.556 E0.00258 ; perimeter
G1 X100.671 Y111.206 E0.02226 ; perimeter
G1 X100.676 Y111.044 E0.00751 ; perimeter
G1 X100.966 Y110.435 E0.03126 ; perimeter
G1 X100.935 Y110.347 E0.00431 ; perimeter
G1 X100.986 Y110.144 E0.00967 ; perimeter
G1 X101.154 Y109.923 E0.01285 ; perimeter
G1 X101.444 Y109.743 E0.01582 ; perimeter
G1 X101.652 Y109.705 E0.00979 ; perimeter
G1 X102.125 Y109.483 E0.02423 ; perimeter
G1 X102.202 Y109.472 E0.00361 ; perimeter
G1 X102.467 Y109.374 E0.01309 ; perimeter
G1 X102.686 Y109.361 E0.01014 ; perimeter
G1 X103.063 Y109.103 E0.02117 ; perimeter
G1 X103.219 Y108.847 E0.01386 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.227 Y108.582 E0.01110 ; perimeter (bridge)
G1 X103.364 Y108.823 E0.01161 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.475 Y109.017 E0.01032 ; perimeter
G1 X103.707 Y109.350 E0.01880 ; perimeter
G1 X103.786 Y109.389 E0.00407 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.984 Y109.487 E0.00924 ; perimeter (bridge)
G1 X103.985 Y109.606 E0.00499 ; perimeter (bridge)
G1 X104.000 Y109.614 E0.00075 ; perimeter (bridge)
G1 X103.899 Y109.649 E0.00448 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.805 Y109.680 E0.00460 ; perimeter
G1 X103.746 Y109.671 E0.00276 ; perimeter
G1 X103.402 Y109.864 E0.01829 ; perimeter
G1 X103.241 Y109.908 E0.00774 ; perimeter
G1 X103.000 Y110.053 E0.01301 ; perimeter
G1 X102.739 Y110.150 E0.01289 ; perimeter
G1 X102.091 Y110.318 E0.03101 ; perimeter
G1 X101.933 Y110.323 E0.00731 ; perimeter
G1 X101.346 Y110.484 E0.02820 ; perimeter
G1 X100.866 Y111.001 E0.03267 ; perimeter
G1 X101.148 Y111.368 E0.02146 ; perimeter
G1 X101.499 Y111.656 E0.02101 ; perimeter
G1 X101.944 Y111.780 E0.02139 ; perimeter
G1 X102.203 Y111.883 E0.01294 ; perimeter
G1 X102.837 Y111.836 E0.02943 ; perimeter
G1 X103.915 Y111.346 E0.05489 ; perimeter
G1 X104.237 Y111.032 E0.02081 ; perimeter
G1 X104.417 Y110.788 E0.01404 ; perimeter
G1 X104.533 Y110.445 E0.01676 ; perimeter
G1 X104.522 Y110.212 E0.01081 ; perimeter
G1 X104.557 Y110.173 E0.00245 ; perimeter
G1 X104.604 Y110.007 E0.00795 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.636 Y109.894 E0.00492 ; perimeter (bridge)
G1 X104.716 Y109.920 E0.00349 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.014 Y109.995 E0.01425 ; perimeter
G1 X105.135 Y110.184 E0.01041 ; perimeter
G1 X105.146 Y110.244 E0.00280 ; perimeter
G1 X105.119 Y110.287 E0.00232 ; perimeter
G1 X105.183 Y110.594 E0.01453 ; perimeter
G1 X105.186 Y111.100 E0.02344 ; perimeter
G1 X105.291 Y111.484 E0.01844 ; perimeter
G1 X105.598 Y111.868 E0.02277 ; perimeter
G1 X105.956 Y112.154 E0.02124 ; perimeter
G1 X106.140 Y112.366 E0.01299 ; perimeter
G1 X106.384 Y112.587 E0.01526 ; perimeter
G1 X106.441 Y112.724 E0.00686 ; perimeter
G1 X106.491 Y112.939 E0.01023 ; perimeter
G1 X106.417 Y113.157 E0.01067 ; perimeter
G1 X106.237 Y113.444 E0.01571 ; perimeter
G1 X105.861 Y113.906 E0.02756 ; perimeter
G1 X105.226 Y114.587 E0.04314 ; perimeter
G1 X105.128 Y114.754 E0.00897 ; perimeter
G1 X104.888 Y114.935 E0.01391 ; perimeter
G1 X104.818 Y115.014 E0.00491 ; perimeter
G1 X104.516 Y115.150 E0.01533 ; perimeter
G1 X104.073 Y115.162 E0.02056 ; perimeter
G1 X103.562 Y114.864 E0.02741 ; perimeter
G1 X103.433 Y114.765 E0.00752 ; perimeter
G1 X103.337 Y114.648 E0.00701 ; perimeter
G1 X103.650 Y114.596 E0.01466 ; perimeter
G1 X103.701 Y114.569 E0.00268 ; perimeter
G1 X104.017 Y114.562 E0.01461 ; perimeter
G1 X104.581 Y114.098 E0.03386 ; perimeter
G1 X105.151 Y113.511 E0.03791 ; perimeter
G1 X105.408 Y113.036 E0.02501 ; perimeter
G1 X105.706 Y112.801 F10800.000 ; move inwards before travel
G1 X105.568 Y112.646 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29704
G1 F2400.000
G1 X105.613 Y112.407 E0.00514 ; infill
G1 X105.339 Y112.149 E0.00796 ; infill
G1 X105.096 Y111.867 E0.00786 ; infill
G1 X104.921 Y110.952 F10800.000 ; move to first infill point
;WIDTH:0.134475
G1 F2400.000
G1 X104.876 Y110.626 E0.00250 ; infill
G1 X104.841 Y110.569 E0.00052 ; infill
G1 X104.777 Y110.626 E0.00065 ; infill
G1 X104.702 Y110.770 E0.00123 ; infill
G1 X104.771 Y110.715 F10800.000 ; move to first infill point
;WIDTH:0.116623
G1 F2400.000
G1 X104.827 Y110.238 E0.00294 ; infill
G1 X104.875 Y110.211 E0.00034 ; infill
G1 X104.823 Y110.315 F10800.000 ; move to first infill point
;WIDTH:0.177933
G1 F2400.000
G1 X104.844 Y110.476 E0.00183 ; infill
;WIDTH:0.187047
G1 X104.854 Y110.794 E0.00381 ; infill
G1 X103.545 Y111.917 F10800.000 ; move to first infill point
;WIDTH:0.294947
G1 F2400.000
G1 X103.369 Y111.985 E0.00395 ; infill
;WIDTH:0.271664
G1 X102.940 Y112.167 E0.00887 ; infill
;WIDTH:0.252038
G1 X102.099 Y112.397 E0.01517 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.940 Y112.167 E-0.23015 ; wipe and retract
;WIPE_END
G1 E-2.16985 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X101.236 Y110.213 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.213216
G1 F2400.000
G1 X101.402 Y110.141 E0.00257 ; infill
;WIDTH:0.230046
G1 X101.569 Y110.068 E0.00283 ; infill
G1 X101.765 Y110.022 E0.00315 ; infill
;WIDTH:0.249209
G1 X101.870 Y109.983 E0.00191 ; infill
;WIDTH:0.256498
G1 X101.894 Y109.976 E0.00045 ; infill
G1 X102.037 Y109.941 F10800.000 ; move to first infill point
;WIDTH:0.31329
G1 F2400.000
G1 X102.552 Y109.777 E0.01215 ; infill
G1 X102.843 Y109.709 E0.00671 ; infill
;WIDTH:0.328388
G1 X103.071 Y109.562 E0.00644 ; infill
;WIDTH:0.336206
G1 X103.107 Y109.543 E0.00098 ; infill
;WIDTH:0.361277
G1 X103.175 Y109.511 E0.00200 ; infill
;WIDTH:0.389691
G1 X103.425 Y109.367 E0.00831 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.175 Y109.511 E-0.07603 ; wipe and retract
;WIPE_END
G1 E-2.32397 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X101.992 Y105.763 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.32399
G1 F2400.000
G1 X101.795 Y104.867 E0.02145 ; infill
G1 X101.807 Y104.556 E0.00728 ; infill
G1 X101.887 Y103.932 E0.01469 ; infill
G1 X101.825 Y103.693 F10800.000 ; move to first infill point
;WIDTH:0.205146
G1 F2400.000
G1 X101.815 Y104.012 E0.00430 ; infill
;WIDTH:0.236592
G1 X101.805 Y104.348 E0.00542 ; infill
;WIDTH:0.248086
G1 X101.800 Y104.384 E0.00062 ; infill
;WIDTH:0.270076
G1 X101.799 Y104.427 E0.00081 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.800 Y104.384 E-0.01136 ; wipe and retract
;WIPE_END
G1 E-2.38864 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X101.393 Y102.384 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.366453
G1 F2400.000
G1 X101.544 Y102.310 E0.00454 ; infill
G1 X101.336 Y101.841 E0.01379 ; infill
;WIDTH:0.330192
G1 X101.279 Y101.623 E0.00538 ; infill
;WIDTH:0.297605
G1 X101.073 Y100.984 E0.01423 ; infill
G1 X100.860 Y100.472 E0.01174 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.073 Y100.984 E-0.14635 ; wipe and retract
G1 X101.279 Y101.623 E-0.17734 ; wipe and retract
;WIPE_END
G1 E-2.07632 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X101.543 Y98.143 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.257418
G1 F2400.000
G1 X101.272 Y98.723 E0.01141 ; infill
;WIDTH:0.233613
G1 X101.214 Y98.816 E0.00173 ; infill
;WIDTH:0.204505
G1 X101.156 Y98.908 E0.00147 ; infill
;WIDTH:0.175398
G1 X100.914 Y99.385 E0.00589 ; infill
G1 X100.910 Y99.248 F10800.000 ; move to first infill point
;WIDTH:0.330992
G1 F2400.000
G1 X101.398 Y98.487 E0.02165 ; infill
G1 X101.440 Y98.382 E0.00270 ; infill
G1 X101.430 Y98.302 E0.00193 ; infill
;WIDTH:0.348432
G1 X101.325 Y97.949 E0.00935 ; infill
G1 X101.298 Y97.793 E0.00401 ; infill
G1 X101.185 Y97.513 E0.00768 ; infill
G1 X101.034 Y96.985 E0.01395 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.185 Y97.513 E-0.14495 ; wipe and retract
G1 X101.298 Y97.793 E-0.07977 ; wipe and retract
G1 X101.325 Y97.949 E-0.04169 ; wipe and retract
G1 X101.430 Y98.302 E-0.09717 ; wipe and retract
;WIPE_END
G1 E-2.03641 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X105.793 Y113.274 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.421464
G1 F2400.000
G1 X105.551 Y113.636 E0.01370 ; infill
;WIDTH:0.38306
G1 X105.484 Y113.729 E0.00324 ; infill
;WIDTH:0.353977
G1 X104.804 Y114.465 E0.02592 ; infill
G1 X104.560 Y114.665 E0.00816 ; infill
G1 X104.151 Y114.919 E0.01244 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.560 Y114.665 E-0.12695 ; wipe and retract
G1 X104.804 Y114.465 E-0.08331 ; wipe and retract
G1 X105.484 Y113.729 E-0.26448 ; wipe and retract
;WIPE_END
G1 E-1.92526 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X104.638 Y97.861 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.493 Y97.838 E0.00496 ; perimeter
G1 X104.230 Y97.832 E0.00891 ; perimeter
G1 X104.229 Y97.471 E0.01223 ; perimeter
G1 X104.594 Y97.821 E0.01711 ; perimeter
G1 X103.842 Y98.319 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.743 Y98.198 E0.00723 ; perimeter
G1 X103.720 Y97.955 E0.01131 ; perimeter
G1 X103.748 Y97.852 E0.00493 ; perimeter
G1 X103.747 Y97.434 E0.01937 ; perimeter
G1 X103.779 Y96.926 E0.02357 ; perimeter
G1 X103.901 Y96.624 E0.01511 ; perimeter
G1 X104.075 Y96.582 E0.00830 ; perimeter
G1 X104.280 Y96.696 E0.01086 ; perimeter
G1 X104.444 Y96.895 E0.01195 ; perimeter
G1 X104.622 Y97.189 E0.01593 ; perimeter
G1 X105.027 Y97.565 E0.02560 ; perimeter
G1 X105.169 Y97.587 E0.00665 ; perimeter
G1 X105.510 Y97.767 E0.01785 ; perimeter
G1 X105.671 Y97.779 E0.00751 ; perimeter
G1 X106.242 Y98.006 E0.02848 ; perimeter
G1 X106.432 Y98.256 E0.01452 ; perimeter
G1 X106.487 Y98.296 E0.00317 ; perimeter
G1 X106.566 Y98.480 E0.00926 ; perimeter
G1 X106.647 Y98.590 E0.00632 ; perimeter
G1 X106.625 Y98.942 E0.01636 ; perimeter
G1 X106.570 Y99.050 E0.00562 ; perimeter
G1 X106.431 Y99.069 E0.00647 ; perimeter
G1 X106.225 Y99.022 E0.00982 ; perimeter
G1 X105.974 Y98.906 E0.01281 ; perimeter
G1 X105.833 Y98.819 E0.00767 ; perimeter
G1 X105.756 Y98.736 E0.00522 ; perimeter
G1 X105.308 Y98.456 E0.02447 ; perimeter
G1 X104.450 Y98.320 E0.04024 ; perimeter
G1 X104.158 Y98.313 E0.01351 ; perimeter
G1 X103.988 Y98.338 E0.00798 ; perimeter
G1 X103.902 Y98.327 E0.00404 ; perimeter
G1 X103.852 Y98.163 F10800.000 ; move inwards before travel
G1 X104.921 Y97.830 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.357249
G1 F2400.000
G1 X105.972 Y98.363 E0.03079 ; infill
G1 X106.164 Y98.552 E0.00705 ; infill
G1 X106.292 Y98.452 E0.00425 ; infill
G1 X106.178 Y98.319 F10800.000 ; move to first infill point
;WIDTH:0.280728
G1 F2400.000
G1 X105.434 Y98.118 E0.01523 ; infill
;WIDTH:0.271313
G1 X105.155 Y98.029 E0.00555 ; infill
;WIDTH:0.39588
G1 X105.040 Y97.990 E0.00359 ; infill
G1 X104.978 Y97.801 E0.00584 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.040 Y97.990 E-0.05254 ; wipe and retract
G1 X105.155 Y98.029 E-0.03227 ; wipe and retract
;WIPE_END
G1 E-2.31520 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X108.291 Y99.449 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.359 Y99.376 E0.00463 ; perimeter
G1 X108.505 Y99.271 E0.00833 ; perimeter
G1 X108.686 Y99.203 E0.00896 ; perimeter
G1 X108.937 Y99.205 E0.01160 ; perimeter
G1 X109.050 Y99.245 E0.00556 ; perimeter
G1 X109.179 Y99.361 E0.00800 ; perimeter
G1 X109.278 Y99.559 E0.01029 ; perimeter
G1 X109.290 Y99.636 E0.00360 ; perimeter
G1 X109.216 Y99.879 E0.01176 ; perimeter
G1 X109.118 Y99.953 E0.00571 ; perimeter
G1 X108.835 Y100.022 E0.01351 ; perimeter
G1 X108.517 Y99.929 E0.01532 ; perimeter
G1 X108.309 Y99.766 E0.01226 ; perimeter
G1 X108.276 Y99.668 E0.00478 ; perimeter
G1 X108.289 Y99.509 E0.00737 ; perimeter
G1 X108.391 Y99.445 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.359 Y99.376 E-0.03982 ; wipe and retract
G1 X108.505 Y99.271 E-0.04746 ; wipe and retract
G1 X108.686 Y99.203 E-0.05102 ; wipe and retract
G1 X108.937 Y99.205 E-0.06611 ; wipe and retract
G1 X109.050 Y99.245 E-0.03169 ; wipe and retract
G1 X109.179 Y99.361 E-0.04557 ; wipe and retract
G1 X109.278 Y99.559 E-0.05862 ; wipe and retract
G1 X109.290 Y99.636 E-0.02049 ; wipe and retract
G1 X109.216 Y99.879 E-0.06701 ; wipe and retract
G1 X109.118 Y99.953 E-0.03253 ; wipe and retract
G1 X108.835 Y100.022 E-0.07696 ; wipe and retract
G1 X108.517 Y99.929 E-0.08729 ; wipe and retract
G1 X108.309 Y99.766 E-0.06986 ; wipe and retract
G1 X108.276 Y99.668 E-0.02721 ; wipe and retract
G1 X108.289 Y99.509 E-0.04201 ; wipe and retract
;WIPE_END
G1 E-1.63637 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X111.404 Y101.305 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.658 Y101.439 E0.00970 ; perimeter
G1 X111.541 Y101.489 E0.00431 ; perimeter
G1 X111.438 Y101.645 E0.00632 ; perimeter
G1 X111.405 Y101.576 E0.00257 ; perimeter
G1 X111.402 Y101.365 E0.00717 ; perimeter
G1 X110.918 Y100.931 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.972 Y100.830 E0.00532 ; perimeter
G1 X111.091 Y100.774 E0.00610 ; perimeter
G1 X111.356 Y100.796 E0.01229 ; perimeter
G1 X111.578 Y100.851 E0.01059 ; perimeter
G1 X111.897 Y101.008 E0.01647 ; perimeter
G1 X112.208 Y101.277 E0.01906 ; perimeter
G1 X112.289 Y101.435 E0.00824 ; perimeter
G1 X112.263 Y101.541 E0.00504 ; perimeter
G1 X111.950 Y101.838 E0.01996 ; perimeter
G1 X111.864 Y101.875 E0.00437 ; perimeter
G1 X111.644 Y102.208 E0.01851 ; perimeter
G1 X111.494 Y102.391 E0.01095 ; perimeter
G1 X111.389 Y102.459 E0.00579 ; perimeter
G1 X111.203 Y102.423 E0.00879 ; perimeter
G1 X111.083 Y102.315 E0.00746 ; perimeter
G1 X110.976 Y102.072 E0.01228 ; perimeter
G1 X110.966 Y101.775 E0.01377 ; perimeter
G1 X110.913 Y101.664 E0.00572 ; perimeter
G1 X110.925 Y100.990 E0.03120 ; perimeter
G1 X111.030 Y100.906 F10800.000 ; move inwards before travel
G1 X111.316 Y102.200 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.166661
G1 F2400.000
G1 X111.327 Y102.117 E0.00086 ; infill
G1 X111.210 Y101.862 E0.00288 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.327 Y102.117 E-0.07398 ; wipe and retract
G1 X111.316 Y102.200 E-0.02212 ; wipe and retract
;WIPE_END
G1 E-2.30390 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X113.604 Y102.259 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.641 Y102.148 E0.00542 ; perimeter
G1 X113.751 Y102.052 E0.00674 ; perimeter
G1 X113.979 Y102.031 E0.01063 ; perimeter
G1 X114.157 Y102.071 E0.00845 ; perimeter
G1 X114.402 Y102.192 E0.01265 ; perimeter
G1 X115.194 Y102.867 E0.04822 ; perimeter
G1 X115.295 Y103.042 E0.00935 ; perimeter
G1 X115.316 Y103.236 E0.00901 ; perimeter
G1 X115.260 Y103.426 E0.00918 ; perimeter
G1 X115.179 Y103.518 E0.00564 ; perimeter
G1 X115.007 Y103.574 E0.00837 ; perimeter
G1 X114.845 Y103.560 E0.00754 ; perimeter
G1 X114.653 Y103.466 E0.00991 ; perimeter
G1 X114.446 Y103.266 E0.01332 ; perimeter
G1 X113.854 Y102.775 E0.03564 ; perimeter
G1 X113.683 Y102.536 E0.01361 ; perimeter
G1 X113.607 Y102.319 E0.01064 ; perimeter
G1 X113.709 Y102.207 F10800.000 ; move inwards before travel
G1 X113.859 Y102.319 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350556
G1 F2400.000
G1 X114.181 Y102.528 E0.00981 ; infill
G1 X114.714 Y102.976 E0.01780 ; infill
;WIDTH:0.362647
G1 X114.918 Y103.164 E0.00738 ; infill
;WIDTH:0.253945
G1 X115.024 Y103.315 E0.00323 ; infill
G1 X115.496 Y104.798 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.665 Y104.834 E0.00800 ; perimeter
G1 X115.837 Y105.075 E0.01373 ; perimeter
G1 X115.889 Y105.418 E0.01606 ; perimeter
G1 X115.916 Y106.339 E0.04268 ; perimeter
G1 X115.884 Y106.588 E0.01165 ; perimeter
G1 X115.785 Y106.828 E0.01202 ; perimeter
G1 X115.619 Y106.987 E0.01066 ; perimeter
G1 X115.519 Y107.022 E0.00489 ; perimeter
G1 X115.424 Y107.002 E0.00450 ; perimeter
G1 X115.289 Y106.909 E0.00762 ; perimeter
G1 X115.171 Y106.711 E0.01065 ; perimeter
G1 X115.122 Y106.589 E0.00609 ; perimeter
G1 X115.098 Y106.274 E0.01463 ; perimeter
G1 X115.161 Y105.219 E0.04899 ; perimeter
G1 X115.255 Y104.942 E0.01354 ; perimeter
G1 X115.291 Y104.898 E0.00264 ; perimeter
G1 X115.450 Y104.838 E0.00788 ; perimeter
G1 X115.588 Y104.944 F10800.000 ; move inwards before travel
G1 X115.502 Y105.076 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.303079
G1 F2400.000
G1 X115.519 Y105.451 E0.00812 ; infill
;WIDTH:0.333348
G1 X115.501 Y106.763 E0.03168 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.519 Y105.451 E-0.34617 ; wipe and retract
;WIPE_END
G1 E-2.05383 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X115.596 Y110.386 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.705 Y110.425 E0.00534 ; perimeter
G1 X115.786 Y110.500 E0.00512 ; perimeter
G1 X115.879 Y110.763 E0.01294 ; perimeter
G1 X115.865 Y110.969 E0.00957 ; perimeter
G1 X115.810 Y111.102 E0.00666 ; perimeter
G1 X115.655 Y111.241 E0.00963 ; perimeter
G1 X115.547 Y111.270 E0.00519 ; perimeter
G1 X115.431 Y111.265 E0.00538 ; perimeter
G1 X115.263 Y111.180 E0.00873 ; perimeter
G1 X115.196 Y111.069 E0.00598 ; perimeter
G1 X115.152 Y110.868 E0.00954 ; perimeter
G1 X115.158 Y110.730 E0.00637 ; perimeter
G1 X115.259 Y110.494 E0.01188 ; perimeter
G1 X115.317 Y110.430 E0.00403 ; perimeter
G1 X115.409 Y110.390 E0.00461 ; perimeter
G1 X115.536 Y110.387 E0.00592 ; perimeter
G1 X115.635 Y110.494 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.705 Y110.425 E-0.04551 ; wipe and retract
G1 X115.786 Y110.500 E-0.02915 ; wipe and retract
G1 X115.879 Y110.763 E-0.07370 ; wipe and retract
G1 X115.865 Y110.969 E-0.05451 ; wipe and retract
G1 X115.810 Y111.102 E-0.03793 ; wipe and retract
G1 X115.655 Y111.241 E-0.05484 ; wipe and retract
G1 X115.547 Y111.270 E-0.02959 ; wipe and retract
G1 X115.431 Y111.265 E-0.03064 ; wipe and retract
G1 X115.263 Y111.180 E-0.04973 ; wipe and retract
G1 X115.196 Y111.069 E-0.03407 ; wipe and retract
G1 X115.152 Y110.868 E-0.05436 ; wipe and retract
G1 X115.158 Y110.730 E-0.03627 ; wipe and retract
G1 X115.259 Y110.494 E-0.06769 ; wipe and retract
G1 X115.317 Y110.430 E-0.02297 ; wipe and retract
G1 X115.409 Y110.390 E-0.02625 ; wipe and retract
G1 X115.536 Y110.387 E-0.03371 ; wipe and retract
;WIPE_END
G1 E-1.71908 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 X115.486 Y114.932 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.535 Y115.001 E0.00390 ; perimeter
G1 X115.571 Y115.109 E0.00527 ; perimeter
G1 X115.580 Y115.234 E0.00579 ; perimeter
G1 X115.548 Y115.379 E0.00690 ; perimeter
G1 X115.513 Y115.450 E0.00366 ; perimeter
G1 X115.379 Y115.597 E0.00922 ; perimeter
G1 X115.245 Y115.704 E0.00795 ; perimeter
G1 X115.040 Y115.822 E0.01098 ; perimeter
G1 X114.723 Y115.879 E0.01491 ; perimeter
G1 X114.533 Y115.860 E0.00886 ; perimeter
G1 X114.381 Y115.787 E0.00779 ; perimeter
G1 X114.061 Y115.776 E0.01484 ; perimeter
G1 X113.795 Y115.871 E0.01307 ; perimeter
G1 X113.554 Y116.020 E0.01315 ; perimeter
G1 X113.376 Y116.083 E0.00874 ; perimeter
G1 X112.912 Y116.127 E0.02161 ; perimeter
G1 X112.316 Y116.141 E0.02761 ; perimeter
G1 X111.942 Y116.127 E0.01733 ; perimeter
G1 X111.803 Y116.039 E0.00762 ; perimeter
G1 X111.709 Y115.836 E0.01035 ; perimeter
G1 X111.736 Y115.610 E0.01055 ; perimeter
G1 X111.771 Y115.527 E0.00420 ; perimeter
G1 X111.988 Y115.399 E0.01164 ; perimeter
G1 X112.072 Y115.378 E0.00403 ; perimeter
G1 X112.288 Y115.398 E0.01004 ; perimeter
G1 X112.734 Y115.317 E0.02098 ; perimeter
G1 X113.196 Y115.282 E0.02149 ; perimeter
G1 X113.580 Y115.334 E0.01794 ; perimeter
G1 X114.016 Y115.432 E0.02072 ; perimeter
G1 X114.360 Y115.278 E0.01742 ; perimeter
G1 X114.556 Y115.104 E0.01216 ; perimeter
G1 X114.992 Y114.841 E0.02359 ; perimeter
G1 X115.227 Y114.802 E0.01102 ; perimeter
G1 X115.364 Y114.851 E0.00676 ; perimeter
G1 X115.436 Y114.899 E0.00401 ; perimeter
G1 X115.464 Y115.013 F10800.000 ; move inwards before travel
G1 X115.321 Y115.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.295751
G1 F2400.000
G1 X115.165 Y115.218 E0.00386 ; infill
;WIDTH:0.3895
G1 X115.000 Y115.343 E0.00597 ; infill
G1 X114.558 Y115.604 E0.01479 ; infill
G1 X114.507 Y115.580 F10800.000 ; move to first infill point
;WIDTH:0.382109
G1 F2400.000
G1 X115.336 Y115.196 E0.02576 ; infill
G1 X113.613 Y115.700 F10800.000 ; move to first infill point
;WIDTH:0.375707
G1 F2400.000
G1 X113.184 Y115.692 E0.01186 ; infill
G1 X112.554 Y115.746 E0.01751 ; infill
;WIDTH:0.340567
G1 X112.322 Y115.769 E0.00576 ; infill
;WIDTH:0.304344
G1 X112.086 Y115.766 E0.00512 ; infill
;WIDTH:0.293508
G1 X112.064 Y115.786 E0.00062 ; infill
;WIDTH:0.253076
G1 X111.967 Y115.836 E0.00190 ; infill
;LAYER_CHANGE
;Z:10.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;10.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.064 Y115.786 E-0.02874 ; wipe and retract
;WIPE_END
G1 E-2.37126 F2400.000 ; retract
G1 Z10.075 F10800.000 ; lift Z
G1 Z10.200 ; move to next layer (50)
;AFTER_LAYER_CHANGE
;10.2
G1 Z10.275 ; lift Z
G1 X102.361 Y107.004 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.312 Y106.657 E0.01185 ; perimeter
G1 X102.355 Y106.392 E0.00910 ; perimeter
G1 X102.345 Y106.343 E0.00168 ; perimeter
G1 X102.530 Y106.496 E0.00811 ; perimeter
G1 X102.593 Y106.581 E0.00359 ; perimeter
G1 X102.567 Y107.104 E0.01775 ; perimeter
G1 X102.725 Y107.296 E0.00842 ; perimeter
G1 X102.827 Y107.630 E0.01179 ; perimeter
G1 X102.895 Y107.715 E0.00370 ; perimeter
G1 X102.955 Y107.937 E0.00776 ; perimeter
G1 X102.883 Y107.865 E0.00344 ; perimeter
G1 X102.328 Y107.701 E0.01959 ; perimeter
G1 X101.901 Y107.518 E0.01570 ; perimeter
G1 X102.321 Y107.048 E0.02134 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.312 Y106.657 E-0.10329 ; wipe and retract
G1 X102.355 Y106.392 E-0.07093 ; wipe and retract
G1 X102.345 Y106.343 E-0.01312 ; wipe and retract
G1 X102.530 Y106.496 E-0.06324 ; wipe and retract
G1 X102.593 Y106.581 E-0.02797 ; wipe and retract
G1 X102.567 Y107.104 E-0.13835 ; wipe and retract
G1 X102.725 Y107.296 E-0.06563 ; wipe and retract
G1 X102.827 Y107.630 E-0.09194 ; wipe and retract
G1 X102.895 Y107.715 E-0.02886 ; wipe and retract
G1 X102.955 Y107.937 E-0.06052 ; wipe and retract
G1 X102.883 Y107.865 E-0.02684 ; wipe and retract
G1 X102.328 Y107.701 E-0.15274 ; wipe and retract
G1 X101.901 Y107.518 E-0.12242 ; wipe and retract
G1 X102.321 Y107.048 E-0.16633 ; wipe and retract
;WIPE_END
G1 E-1.26782 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X103.488 Y109.383 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.536 Y109.446 E0.00267 ; perimeter
G1 X103.239 Y109.511 E0.01031 ; perimeter
G1 X103.434 Y109.411 E0.00745 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.536 Y109.446 E-0.02839 ; wipe and retract
G1 X103.239 Y109.511 E-0.08036 ; wipe and retract
G1 X103.434 Y109.411 E-0.05807 ; wipe and retract
;WIPE_END
G1 E-2.23318 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X104.694 Y111.188 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.795 Y111.450 E0.00949 ; perimeter
G1 X104.835 Y111.709 E0.00886 ; perimeter
G1 X104.571 Y111.576 E0.01002 ; perimeter
G1 X104.472 Y111.579 E0.00335 ; perimeter
G1 X104.613 Y111.367 E0.00862 ; perimeter
G1 X104.669 Y111.243 E0.00462 ; perimeter
G1 X105.749 Y112.588 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X106.171 Y112.814 E0.01622 ; perimeter
G1 X106.040 Y113.025 E0.00843 ; perimeter
G1 X105.777 Y113.313 E0.01318 ; perimeter
G1 X105.910 Y112.930 E0.01374 ; perimeter
G1 X105.768 Y112.645 E0.01079 ; perimeter
G1 X105.388 Y112.964 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.293 Y112.775 E0.00980 ; perimeter
G1 X105.259 Y112.593 E0.00856 ; perimeter
G1 X104.929 Y112.296 E0.02058 ; perimeter
G1 X104.464 Y112.062 E0.02409 ; perimeter
G1 X104.233 Y112.070 E0.01070 ; perimeter
G1 X103.964 Y112.138 E0.01287 ; perimeter
G1 X103.643 Y112.148 E0.01487 ; perimeter
G1 X102.716 Y112.450 E0.04516 ; perimeter
G1 X102.547 Y112.470 E0.00791 ; perimeter
G1 X102.340 Y112.431 E0.00973 ; perimeter
G1 X102.178 Y112.210 E0.01271 ; perimeter
G1 X102.312 Y112.131 E0.00721 ; perimeter
G1 X102.565 Y112.072 E0.01205 ; perimeter
G1 X102.924 Y111.940 E0.01771 ; perimeter
G1 X104.021 Y111.387 E0.05687 ; perimeter
G1 X104.190 Y111.132 E0.01416 ; perimeter
G1 X104.404 Y110.661 E0.02397 ; perimeter
G1 X104.338 Y110.060 E0.02803 ; perimeter
G1 X103.830 Y109.856 E0.02536 ; perimeter
G1 X103.581 Y109.939 E0.01220 ; perimeter
G1 X103.244 Y110.000 E0.01584 ; perimeter
G1 X102.555 Y110.192 E0.03315 ; perimeter
G1 X102.237 Y110.230 E0.01484 ; perimeter
G1 X101.700 Y110.212 E0.02488 ; perimeter
G1 X101.594 Y110.244 E0.00512 ; perimeter
G1 X101.430 Y110.222 E0.00766 ; perimeter
G1 X101.410 Y110.144 E0.00371 ; perimeter
G1 X101.518 Y109.948 E0.01033 ; perimeter
G1 X101.830 Y109.699 E0.01853 ; perimeter
G1 X102.356 Y109.425 E0.02749 ; perimeter
G1 X102.707 Y109.306 E0.01712 ; perimeter
G1 X102.771 Y109.210 E0.00537 ; perimeter
G1 X103.021 Y109.081 E0.01304 ; perimeter
G1 X102.969 Y108.514 E0.02636 ; perimeter
G1 X102.723 Y108.386 E0.01283 ; perimeter
G1 X102.629 Y108.292 E0.00616 ; perimeter
G1 X102.164 Y108.155 E0.02244 ; perimeter
G1 X101.606 Y107.917 E0.02811 ; perimeter
G1 X101.314 Y107.706 E0.01669 ; perimeter
G1 X101.262 Y107.572 E0.00666 ; perimeter
G1 X101.277 Y107.494 E0.00369 ; perimeter
G1 X101.853 Y106.849 E0.04003 ; perimeter
G1 X101.825 Y106.653 E0.00920 ; perimeter
G1 X101.865 Y106.398 E0.01193 ; perimeter
G1 X101.838 Y106.252 E0.00689 ; perimeter
G1 X101.847 Y105.742 E0.02361 ; perimeter
G1 X101.734 Y105.474 E0.01350 ; perimeter
G1 X101.449 Y105.077 E0.02264 ; perimeter
G1 X101.413 Y104.855 E0.01040 ; perimeter
G1 X101.483 Y104.435 E0.01971 ; perimeter
G1 X101.583 Y104.157 E0.01370 ; perimeter
G1 X101.617 Y103.931 E0.01061 ; perimeter
G1 X101.787 Y103.622 E0.01630 ; perimeter
G1 X101.887 Y103.362 E0.01289 ; perimeter
G1 X101.952 Y103.735 E0.01751 ; perimeter
G1 X102.080 Y104.134 E0.01940 ; perimeter
G1 X102.084 Y104.234 E0.00465 ; perimeter
G1 X102.209 Y104.512 E0.01414 ; perimeter
G1 X102.243 Y104.721 E0.00980 ; perimeter
G1 X102.257 Y104.988 E0.01241 ; perimeter
G1 X102.243 Y105.456 E0.02165 ; perimeter
G1 X102.433 Y105.789 E0.01778 ; perimeter
G1 X102.882 Y106.161 E0.02700 ; perimeter
G1 X103.016 Y106.340 E0.01035 ; perimeter
G1 X103.080 Y106.496 E0.00780 ; perimeter
G1 X103.058 Y106.942 E0.02070 ; perimeter
G1 X103.144 Y107.046 E0.00622 ; perimeter
G1 X103.261 Y107.401 E0.01735 ; perimeter
G1 X103.335 Y107.493 E0.00545 ; perimeter
G1 X103.433 Y107.857 E0.01744 ; perimeter
G1 X103.552 Y108.521 E0.03125 ; perimeter
G1 X103.650 Y108.680 E0.00867 ; perimeter
G1 X103.766 Y108.955 E0.01383 ; perimeter
G1 X103.929 Y109.166 E0.01233 ; perimeter
G1 X104.257 Y109.273 E0.01600 ; perimeter
G1 X104.495 Y109.405 E0.01258 ; perimeter
G1 X104.824 Y109.493 E0.01576 ; perimeter
G1 X105.154 Y109.651 E0.01693 ; perimeter
G1 X105.226 Y109.712 E0.00440 ; perimeter
G1 X105.270 Y109.803 E0.00469 ; perimeter
G1 X105.293 Y110.219 E0.01928 ; perimeter
G1 X105.260 Y110.671 E0.02102 ; perimeter
G1 X105.180 Y111.109 E0.02059 ; perimeter
G1 X105.263 Y111.325 E0.01075 ; perimeter
G1 X105.292 Y111.512 E0.00877 ; perimeter
G1 X105.776 Y112.004 E0.03195 ; perimeter
G1 X106.039 Y112.203 E0.01529 ; perimeter
G1 X106.311 Y112.343 E0.01416 ; perimeter
G1 X106.404 Y112.342 E0.00432 ; perimeter
G1 X106.481 Y112.369 E0.00378 ; perimeter
G1 X106.672 Y112.559 E0.01249 ; perimeter
G1 X106.701 Y112.711 E0.00717 ; perimeter
G1 X106.634 Y112.984 E0.01299 ; perimeter
G1 X106.425 Y113.318 E0.01824 ; perimeter
G1 X106.084 Y113.693 E0.02350 ; perimeter
G1 X105.647 Y114.119 E0.02826 ; perimeter
G1 X105.273 Y114.411 E0.02196 ; perimeter
G1 X105.183 Y114.526 E0.00680 ; perimeter
G1 X104.922 Y114.726 E0.01521 ; perimeter
G1 X104.565 Y114.891 E0.01824 ; perimeter
G1 X104.236 Y114.951 E0.01549 ; perimeter
G1 X104.089 Y114.842 E0.00848 ; perimeter
G1 X104.053 Y114.745 E0.00480 ; perimeter
G1 X104.173 Y114.682 E0.00624 ; perimeter
G1 X104.605 Y114.216 E0.02947 ; perimeter
G1 X105.245 Y113.377 E0.04886 ; perimeter
G1 X105.369 Y113.020 E0.01748 ; perimeter
G1 X105.557 Y112.836 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.293 Y112.775 E-0.06783 ; wipe and retract
G1 X105.259 Y112.593 E-0.04875 ; wipe and retract
G1 X104.929 Y112.296 E-0.11723 ; wipe and retract
G1 X104.464 Y112.062 E-0.13722 ; wipe and retract
G1 X104.233 Y112.070 E-0.06097 ; wipe and retract
G1 X103.964 Y112.138 E-0.07333 ; wipe and retract
G1 X103.643 Y112.148 E-0.08469 ; wipe and retract
G1 X102.716 Y112.450 E-0.25727 ; wipe and retract
G1 X102.547 Y112.470 E-0.04504 ; wipe and retract
G1 X102.340 Y112.431 E-0.05541 ; wipe and retract
G1 X102.178 Y112.210 E-0.07239 ; wipe and retract
G1 X102.312 Y112.131 E-0.04105 ; wipe and retract
G1 X102.565 Y112.072 E-0.06865 ; wipe and retract
G1 X102.924 Y111.940 E-0.10090 ; wipe and retract
G1 X104.021 Y111.387 E-0.32400 ; wipe and retract
G1 X104.190 Y111.132 E-0.08069 ; wipe and retract
G1 X104.404 Y110.661 E-0.13657 ; wipe and retract
G1 X104.338 Y110.060 E-0.15969 ; wipe and retract
G1 X103.830 Y109.856 E-0.14449 ; wipe and retract
G1 X103.581 Y109.939 E-0.06948 ; wipe and retract
G1 X103.244 Y110.000 E-0.09026 ; wipe and retract
G1 X103.083 Y110.045 E-0.04408 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X100.656 Y100.064 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.365 Y99.859 E0.01206 ; perimeter
G1 X100.511 Y99.760 E0.00597 ; perimeter
G1 X100.616 Y99.749 E0.00357 ; perimeter
G1 X100.616 Y99.883 E0.00450 ; perimeter
G1 X100.643 Y100.006 E0.00426 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.365 Y99.859 E-0.08302 ; wipe and retract
G1 X100.511 Y99.760 E-0.04658 ; wipe and retract
G1 X100.616 Y99.749 E-0.02780 ; wipe and retract
G1 X100.616 Y99.883 E-0.03512 ; wipe and retract
G1 X100.643 Y100.006 E-0.03324 ; wipe and retract
;WIPE_END
G1 E-2.17425 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X101.697 Y102.753 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.803 Y103.095 E0.01660 ; perimeter
G1 X101.709 Y102.921 E0.00919 ; perimeter
G1 X101.430 Y102.635 E0.01847 ; perimeter
G1 X101.365 Y102.617 E0.00313 ; perimeter
G1 X101.089 Y102.317 E0.01888 ; perimeter
G1 X101.023 Y102.269 E0.00381 ; perimeter
G1 X100.861 Y101.979 E0.01540 ; perimeter
G1 X100.753 Y101.537 E0.02106 ; perimeter
G1 X100.697 Y101.018 E0.02415 ; perimeter
G1 X100.456 Y100.525 E0.02545 ; perimeter
G1 X100.264 Y100.366 E0.01154 ; perimeter
G1 X100.051 Y100.232 E0.01165 ; perimeter
G1 X99.862 Y100.016 E0.01331 ; perimeter
G1 X99.821 Y99.876 E0.00676 ; perimeter
G1 X99.830 Y99.743 E0.00618 ; perimeter
G1 X99.939 Y99.514 E0.01174 ; perimeter
G1 X99.966 Y99.491 E0.00164 ; perimeter
G1 X100.133 Y99.433 E0.00821 ; perimeter
G1 X100.342 Y99.293 E0.01166 ; perimeter
G1 X100.506 Y99.276 E0.00764 ; perimeter
G1 X100.754 Y99.083 E0.01456 ; perimeter
G1 X100.895 Y99.077 E0.00650 ; perimeter
G1 X101.123 Y98.544 E0.02689 ; perimeter
G1 X101.133 Y98.314 E0.01066 ; perimeter
G1 X101.039 Y98.067 E0.01221 ; perimeter
G1 X101.003 Y98.037 E0.00217 ; perimeter
G1 X100.926 Y97.832 E0.01016 ; perimeter
G1 X100.877 Y97.767 E0.00374 ; perimeter
G1 X100.706 Y97.364 E0.02031 ; perimeter
G1 X100.613 Y97.063 E0.01460 ; perimeter
G1 X100.627 Y96.926 E0.00635 ; perimeter
G1 X100.576 Y96.621 E0.01434 ; perimeter
G1 X100.623 Y96.525 E0.00496 ; perimeter
G1 X100.694 Y96.477 E0.00399 ; perimeter
G1 X101.125 Y96.338 E0.02097 ; perimeter
G1 X101.227 Y96.370 E0.00495 ; perimeter
G1 X101.329 Y96.626 E0.01274 ; perimeter
G1 X101.375 Y96.902 E0.01299 ; perimeter
G1 X101.457 Y97.049 E0.00779 ; perimeter
G1 X101.566 Y97.372 E0.01578 ; perimeter
G1 X101.607 Y97.626 E0.01193 ; perimeter
G1 X101.593 Y97.716 E0.00422 ; perimeter
G1 X101.619 Y97.912 E0.00915 ; perimeter
G1 X101.574 Y98.211 E0.01398 ; perimeter
G1 X101.424 Y98.528 E0.01625 ; perimeter
G1 X101.267 Y99.029 E0.02433 ; perimeter
G1 X101.099 Y99.474 E0.02206 ; perimeter
G1 X101.098 Y99.831 E0.01650 ; perimeter
G1 X101.196 Y100.275 E0.02106 ; perimeter
G1 X101.707 Y101.655 E0.06816 ; perimeter
G1 X101.759 Y101.749 E0.00500 ; perimeter
G1 X101.818 Y102.013 E0.01253 ; perimeter
G1 X101.900 Y102.221 E0.01034 ; perimeter
G1 X101.908 Y102.491 E0.01253 ; perimeter
G1 X101.875 Y102.704 E0.00999 ; perimeter
G1 X101.755 Y102.737 E0.00577 ; perimeter
G1 X101.382 Y102.925 F10800.000 ; move inwards before travel
G1 X101.667 Y102.493 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.431565
G1 F2400.000
G1 X101.359 Y101.970 E0.01960 ; infill
G1 X101.284 Y101.813 E0.00563 ; infill
G1 X101.178 Y101.463 E0.01183 ; infill
;WIDTH:0.420121
G1 X101.136 Y101.287 E0.00564 ; infill
;WIDTH:0.375834
G1 X101.095 Y101.112 E0.00498 ; infill
;WIDTH:0.331546
G1 X101.054 Y100.937 E0.00432 ; infill
;WIDTH:0.287259
G1 X100.833 Y100.411 E0.01160 ; infill
G1 X100.918 Y100.186 E0.00488 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.833 Y100.411 E-0.06341 ; wipe and retract
G1 X101.054 Y100.937 E-0.15069 ; wipe and retract
;WIPE_END
G1 E-2.18590 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X101.353 Y98.029 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.330448
G1 F2400.000
G1 X101.169 Y97.438 E0.01480 ; infill
G1 X101.005 Y97.024 E0.01064 ; infill
G1 X101.002 Y96.933 E0.00218 ; infill
;WIDTH:0.307447
G1 X100.980 Y96.772 E0.00358 ; infill
;WIDTH:0.297881
G1 X101.005 Y96.764 E0.00056 ; infill
;WIDTH:0.251176
G1 X101.029 Y96.756 E0.00044 ; infill
;WIDTH:0.20616
G1 X101.054 Y96.749 E0.00035 ; infill
;WIDTH:0.161143
G1 X101.078 Y96.741 E0.00025 ; infill
;WIDTH:0.116126
G1 X101.103 Y96.734 E0.00016 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.078 Y96.741 E-0.00674 ; wipe and retract
;WIPE_END
G1 E-2.39326 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X101.845 Y104.292 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.371304
G1 F2400.000
G1 X101.834 Y104.728 E0.01192 ; infill
;WIDTH:0.38097
G1 X101.835 Y104.765 E0.00102 ; infill
;WIDTH:0.393402
G1 X101.877 Y105.260 E0.01448 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.835 Y104.765 E-0.13115 ; wipe and retract
;WIPE_END
G1 E-2.26885 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X103.158 Y108.098 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.275827
G1 F2400.000
G1 X103.289 Y108.622 E0.01047 ; infill
;WIDTH:0.30399
G1 X103.421 Y109.146 E0.01174 ; infill
G1 X103.399 Y109.158 F10800.000 ; move to first infill point
;WIDTH:0.151827
G1 F2400.000
G1 X103.272 Y108.617 E0.00503 ; infill
G1 X103.237 Y108.358 E0.00237 ; infill
;WIDTH:0.143339
G1 X103.133 Y108.112 E0.00223 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.237 Y108.358 E-0.07036 ; wipe and retract
;WIPE_END
G1 E-2.32964 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X101.920 Y109.978 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.275407
G1 F2400.000
G1 X102.251 Y109.869 E0.00674 ; infill
;WIDTH:0.312943
G1 X102.365 Y109.836 E0.00265 ; infill
;WIDTH:0.3553
G1 X102.505 Y109.794 E0.00380 ; infill
;WIDTH:0.375978
G1 X103.026 Y109.633 E0.01509 ; infill
G1 X104.040 Y109.566 F10800.000 ; move to first infill point
;WIDTH:0.226014
G1 F2400.000
G1 X104.380 Y109.718 E0.00568 ; infill
;WIDTH:0.253724
G1 X104.602 Y109.792 E0.00409 ; infill
;WIDTH:0.284569
G1 X104.647 Y109.820 E0.00107 ; infill
;WIDTH:0.315411
G1 X104.692 Y109.849 E0.00121 ; infill
;WIDTH:0.343751
G1 X105.046 Y110.299 E0.01432 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.692 Y109.849 E-0.15107 ; wipe and retract
;WIPE_END
G1 E-2.24893 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X103.655 Y111.906 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.222592
G1 F2400.000
G1 X104.066 Y111.754 E0.00656 ; infill
G1 X105.220 Y111.782 F10800.000 ; move to first infill point
;WIDTH:0.30985
G1 F2400.000
G1 X105.312 Y112.317 E0.01204 ; infill
G1 X105.659 Y113.523 F10800.000 ; move to first infill point
;WIDTH:0.372083
G1 F2400.000
G1 X105.391 Y113.826 E0.01107 ; infill
;WIDTH:0.337318
G1 X105.277 Y113.941 E0.00397 ; infill
;WIDTH:0.296011
G1 X105.163 Y114.057 E0.00341 ; infill
;WIDTH:0.254704
G1 X105.049 Y114.172 E0.00286 ; infill
;WIDTH:0.213395
G1 X104.839 Y114.409 E0.00448 ; infill
;WIDTH:0.165921
G1 X104.769 Y114.472 E0.00097 ; infill
;WIDTH:0.149577
G1 X104.703 Y114.520 E0.00072 ; infill
;WIDTH:0.123248
G1 X104.637 Y114.568 E0.00055 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.703 Y114.520 E-0.02154 ; wipe and retract
;WIPE_END
G1 E-2.37846 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X104.658 Y97.339 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.960 Y97.496 E0.01579 ; perimeter
G1 X105.071 Y97.594 E0.00684 ; perimeter
G1 X105.413 Y97.646 E0.01602 ; perimeter
G1 X105.546 Y97.716 E0.00693 ; perimeter
G1 X105.821 Y97.735 E0.01279 ; perimeter
G1 X106.309 Y97.916 E0.02409 ; perimeter
G1 X106.446 Y98.107 E0.01089 ; perimeter
G1 X106.519 Y98.371 E0.01271 ; perimeter
G1 X106.522 Y98.594 E0.01030 ; perimeter
G1 X106.452 Y98.759 E0.00830 ; perimeter
G1 X106.444 Y98.830 E0.00335 ; perimeter
G1 X106.376 Y98.890 E0.00418 ; perimeter
G1 X106.260 Y98.905 E0.00542 ; perimeter
G1 X105.906 Y98.812 E0.01696 ; perimeter
G1 X105.321 Y98.478 E0.03119 ; perimeter
G1 X104.821 Y98.322 E0.02429 ; perimeter
G1 X104.505 Y98.263 E0.01487 ; perimeter
G1 X104.050 Y98.086 E0.02261 ; perimeter
G1 X103.924 Y97.961 E0.00822 ; perimeter
G1 X103.907 Y97.764 E0.00918 ; perimeter
G1 X103.799 Y97.588 E0.00955 ; perimeter
G1 X103.791 Y97.383 E0.00950 ; perimeter
G1 X103.711 Y97.086 E0.01426 ; perimeter
G1 X103.723 Y96.899 E0.00866 ; perimeter
G1 X103.690 Y96.563 E0.01566 ; perimeter
G1 X103.738 Y96.411 E0.00735 ; perimeter
G1 X103.740 Y96.344 E0.00313 ; perimeter
G1 X103.875 Y96.295 E0.00665 ; perimeter
G1 X104.126 Y96.352 E0.01196 ; perimeter
G1 X104.237 Y96.441 E0.00657 ; perimeter
G1 X104.434 Y96.717 E0.01573 ; perimeter
G1 X104.468 Y96.819 E0.00496 ; perimeter
G1 X104.573 Y96.979 E0.00886 ; perimeter
G1 X104.644 Y97.280 E0.01435 ; perimeter
G1 X104.589 Y97.673 F10800.000 ; move inwards before travel
G1 X104.295 Y97.592 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.441028
G1 F2400.000
G1 X104.341 Y97.669 E0.00296 ; infill
;WIDTH:0.458768
G1 X104.369 Y97.712 E0.00179 ; infill
G1 X104.713 Y97.859 E0.01291 ; infill
G1 X104.868 Y97.934 F10800.000 ; move to first infill point
;WIDTH:0.324481
G1 F2400.000
G1 X104.944 Y97.960 E0.00190 ; infill
;WIDTH:0.353746
G1 X105.283 Y98.039 E0.00898 ; infill
G1 X105.467 Y98.108 E0.00508 ; infill
;WIDTH:0.364851
G1 X106.241 Y98.301 E0.02134 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.467 Y98.108 E-0.21039 ; wipe and retract
;WIPE_END
G1 E-2.18961 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X104.295 Y97.592 ; move to first infill point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.40958
G1 F2400.000
G1 X104.234 Y97.456 E0.00456 ; infill
G1 X104.173 Y97.151 E0.00948 ; infill
G1 X104.125 Y97.044 E0.00357 ; infill
;WIDTH:0.382074
G1 X104.116 Y97.012 E0.00095 ; infill
;WIDTH:0.360879
G1 X104.108 Y96.972 E0.00107 ; infill
;WIDTH:0.340167
G1 X104.100 Y96.904 E0.00169 ; infill
;WIDTH:0.313875
G1 X103.981 Y96.566 E0.00806 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.100 Y96.904 E-0.09445 ; wipe and retract
;WIPE_END
G1 E-2.30555 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X108.475 Y99.355 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.570 Y99.276 E0.00573 ; perimeter
G1 X108.712 Y99.198 E0.00747 ; perimeter
G1 X108.865 Y99.177 E0.00715 ; perimeter
G1 X109.051 Y99.216 E0.00881 ; perimeter
G1 X109.188 Y99.343 E0.00867 ; perimeter
G1 X109.281 Y99.581 E0.01181 ; perimeter
G1 X109.226 Y99.877 E0.01396 ; perimeter
G1 X109.105 Y99.962 E0.00689 ; perimeter
G1 X108.909 Y100.017 E0.00942 ; perimeter
G1 X108.807 Y100.007 E0.00475 ; perimeter
G1 X108.568 Y99.923 E0.01173 ; perimeter
G1 X108.387 Y99.696 E0.01343 ; perimeter
G1 X108.399 Y99.546 E0.00695 ; perimeter
G1 X108.453 Y99.411 E0.00676 ; perimeter
G1 X108.598 Y99.373 F10800.000 ; move inwards before travel
G1 X108.876 Y99.619 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.347046
G1 F2400.000
G1 X108.847 Y99.592 E0.00101 ; infill
G1 X108.800 Y99.596 E0.00119 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.847 Y99.592 E-0.01237 ; wipe and retract
G1 X108.876 Y99.619 E-0.01055 ; wipe and retract
;WIPE_END
G1 E-2.37708 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X111.406 Y101.680 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.341 Y101.826 E0.00541 ; perimeter
G1 X111.347 Y101.765 E0.00209 ; perimeter
G1 X111.372 Y101.729 E0.00146 ; perimeter
G1 X111.268 Y100.967 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.401 Y100.953 E0.00619 ; perimeter
G1 X111.674 Y101.038 E0.01327 ; perimeter
G1 X111.890 Y101.230 E0.01338 ; perimeter
G1 X111.991 Y101.413 E0.00966 ; perimeter
G1 X111.944 Y101.714 E0.01410 ; perimeter
G1 X111.902 Y101.755 E0.00272 ; perimeter
G1 X111.789 Y102.006 E0.01275 ; perimeter
G1 X111.791 Y102.156 E0.00695 ; perimeter
G1 X111.718 Y102.263 E0.00600 ; perimeter
G1 X111.667 Y102.475 E0.01012 ; perimeter
G1 X111.615 Y102.558 E0.00452 ; perimeter
G1 X111.485 Y102.648 E0.00733 ; perimeter
G1 X111.312 Y102.665 E0.00805 ; perimeter
G1 X111.222 Y102.653 E0.00420 ; perimeter
G1 X111.133 Y102.603 E0.00475 ; perimeter
G1 X111.061 Y102.531 E0.00467 ; perimeter
G1 X110.920 Y102.328 E0.01149 ; perimeter
G1 X110.834 Y102.146 E0.00928 ; perimeter
G1 X110.812 Y101.846 E0.01395 ; perimeter
G1 X110.860 Y101.788 E0.00349 ; perimeter
G1 X110.880 Y101.590 E0.00919 ; perimeter
G1 X110.974 Y101.457 E0.00755 ; perimeter
G1 X110.971 Y101.424 E0.00152 ; perimeter
G1 X111.051 Y101.331 E0.00570 ; perimeter
G1 X111.056 Y101.185 E0.00675 ; perimeter
G1 X111.226 Y101.010 E0.01128 ; perimeter
G1 X111.375 Y101.046 F10800.000 ; move inwards before travel
G1 X111.347 Y101.309 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.151645
G1 F2400.000
G1 X111.334 Y101.324 E0.00018 ; infill
;WIDTH:0.125636
G1 X111.320 Y101.339 E0.00014 ; infill
;WIDTH:0.0996278
G1 X111.327 Y101.371 E0.00016 ; infill
G1 X111.347 Y101.309 F10800.000 ; move to first infill point
;WIDTH:0.176166
G1 F2400.000
G1 X111.369 Y101.305 E0.00025 ; infill
;WIDTH:0.22
G1 X111.404 Y101.300 E0.00053 ; infill
;WIDTH:0.243252
G1 X111.502 Y101.342 E0.00178 ; infill
G1 X111.737 Y101.511 E0.00481 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.502 Y101.342 E-0.07612 ; wipe and retract
G1 X111.404 Y101.300 E-0.02822 ; wipe and retract
;WIPE_END
G1 E-2.29565 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X113.832 Y102.267 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.908 Y102.193 E0.00490 ; perimeter
G1 X114.052 Y102.157 E0.00686 ; perimeter
G1 X114.266 Y102.182 E0.00998 ; perimeter
G1 X114.545 Y102.307 E0.01419 ; perimeter
G1 X115.161 Y102.840 E0.03770 ; perimeter
G1 X115.248 Y102.999 E0.00838 ; perimeter
G1 X115.261 Y103.194 E0.00908 ; perimeter
G1 X115.223 Y103.328 E0.00646 ; perimeter
G1 X115.131 Y103.433 E0.00647 ; perimeter
G1 X114.947 Y103.508 E0.00918 ; perimeter
G1 X114.782 Y103.499 E0.00766 ; perimeter
G1 X114.629 Y103.435 E0.00768 ; perimeter
G1 X114.312 Y103.186 E0.01869 ; perimeter
G1 X114.062 Y102.955 E0.01575 ; perimeter
G1 X113.865 Y102.694 E0.01516 ; perimeter
G1 X113.796 Y102.467 E0.01100 ; perimeter
G1 X113.812 Y102.323 E0.00668 ; perimeter
G1 X113.938 Y102.265 F10800.000 ; move inwards before travel
G1 X114.097 Y102.402 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.305459
G1 F2400.000
G1 X114.363 Y102.683 E0.00845 ; infill
G1 X114.906 Y103.145 E0.01558 ; infill
;WIDTH:0.193933
G1 X114.997 Y103.221 E0.00148 ; infill
G1 X115.636 Y104.941 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.793 Y105.110 E0.01065 ; perimeter
G1 X115.860 Y105.263 E0.00773 ; perimeter
G1 X115.884 Y105.424 E0.00757 ; perimeter
G1 X115.915 Y106.184 E0.03524 ; perimeter
G1 X115.884 Y106.405 E0.01032 ; perimeter
G1 X115.804 Y106.618 E0.01054 ; perimeter
G1 X115.679 Y106.766 E0.00895 ; perimeter
G1 X115.519 Y106.836 E0.00810 ; perimeter
G1 X115.408 Y106.810 E0.00526 ; perimeter
G1 X115.287 Y106.724 E0.00689 ; perimeter
G1 X115.124 Y106.435 E0.01536 ; perimeter
G1 X115.100 Y106.141 E0.01368 ; perimeter
G1 X115.170 Y105.286 E0.03972 ; perimeter
G1 X115.260 Y105.066 E0.01101 ; perimeter
G1 X115.342 Y104.978 E0.00558 ; perimeter
G1 X115.468 Y104.932 E0.00622 ; perimeter
G1 X115.576 Y104.938 E0.00502 ; perimeter
G1 X115.640 Y105.171 F10800.000 ; move inwards before travel
G1 X115.540 Y105.185 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.268281
G1 F2400.000
G1 X115.518 Y105.370 E0.00348 ; infill
;WIDTH:0.288977
G1 X115.521 Y105.459 E0.00183 ; infill
;WIDTH:0.330886
G1 X115.514 Y105.800 E0.00817 ; infill
;WIDTH:0.340062
G1 X115.504 Y106.308 E0.01254 ; infill
G1 X115.469 Y106.556 E0.00621 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.504 Y106.308 E-0.06628 ; wipe and retract
G1 X115.514 Y105.800 E-0.13396 ; wipe and retract
;WIPE_END
G1 E-2.19977 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X115.712 Y110.504 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.822 Y110.619 E0.00736 ; perimeter
G1 X115.880 Y110.821 E0.00972 ; perimeter
G1 X115.871 Y111.018 E0.00916 ; perimeter
G1 X115.821 Y111.159 E0.00690 ; perimeter
G1 X115.655 Y111.317 E0.01063 ; perimeter
G1 X115.551 Y111.347 E0.00500 ; perimeter
G1 X115.432 Y111.342 E0.00550 ; perimeter
G1 X115.246 Y111.239 E0.00986 ; perimeter
G1 X115.195 Y111.135 E0.00535 ; perimeter
G1 X115.160 Y110.983 E0.00723 ; perimeter
G1 X115.160 Y110.791 E0.00890 ; perimeter
G1 X115.238 Y110.606 E0.00932 ; perimeter
G1 X115.372 Y110.505 E0.00774 ; perimeter
G1 X115.384 Y110.473 E0.00157 ; perimeter
G1 X115.590 Y110.459 E0.00956 ; perimeter
G1 X115.656 Y110.484 E0.00327 ; perimeter
G1 X115.705 Y110.663 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.822 Y110.619 E-0.05655 ; wipe and retract
G1 X115.880 Y110.821 E-0.05538 ; wipe and retract
G1 X115.871 Y111.018 E-0.05221 ; wipe and retract
G1 X115.821 Y111.159 E-0.03930 ; wipe and retract
G1 X115.655 Y111.317 E-0.06059 ; wipe and retract
G1 X115.551 Y111.347 E-0.02850 ; wipe and retract
G1 X115.432 Y111.342 E-0.03131 ; wipe and retract
G1 X115.246 Y111.239 E-0.05616 ; wipe and retract
G1 X115.195 Y111.135 E-0.03047 ; wipe and retract
G1 X115.160 Y110.983 E-0.04119 ; wipe and retract
G1 X115.160 Y110.791 E-0.05073 ; wipe and retract
G1 X115.238 Y110.606 E-0.05308 ; wipe and retract
G1 X115.372 Y110.505 E-0.04410 ; wipe and retract
G1 X115.384 Y110.473 E-0.00892 ; wipe and retract
G1 X115.590 Y110.459 E-0.05449 ; wipe and retract
G1 X115.656 Y110.484 E-0.01863 ; wipe and retract
;WIPE_END
G1 E-1.71841 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 X115.400 Y114.845 ; move to first perimeter point
G1 Z10.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.492 Y114.913 E0.00527 ; perimeter
G1 X115.543 Y114.988 E0.00420 ; perimeter
G1 X115.580 Y115.101 E0.00552 ; perimeter
G1 X115.587 Y115.226 E0.00579 ; perimeter
G1 X115.555 Y115.372 E0.00692 ; perimeter
G1 X115.520 Y115.440 E0.00354 ; perimeter
G1 X115.366 Y115.604 E0.01044 ; perimeter
G1 X115.024 Y115.830 E0.01900 ; perimeter
G1 X114.705 Y115.898 E0.01509 ; perimeter
G1 X114.319 Y115.863 E0.01795 ; perimeter
G1 X113.613 Y116.062 E0.03398 ; perimeter
G1 X113.086 Y116.112 E0.02450 ; perimeter
G1 X112.463 Y116.110 E0.02887 ; perimeter
G1 X112.269 Y116.133 E0.00903 ; perimeter
G1 X111.942 Y116.126 E0.01516 ; perimeter
G1 X111.812 Y116.049 E0.00699 ; perimeter
G1 X111.681 Y115.818 E0.01230 ; perimeter
G1 X111.704 Y115.626 E0.00893 ; perimeter
G1 X111.755 Y115.517 E0.00558 ; perimeter
G1 X111.958 Y115.404 E0.01073 ; perimeter
G1 X112.076 Y115.383 E0.00556 ; perimeter
G1 X112.398 Y115.412 E0.01498 ; perimeter
G1 X112.920 Y115.319 E0.02459 ; perimeter
G1 X113.470 Y115.271 E0.02556 ; perimeter
G1 X113.760 Y115.300 E0.01348 ; perimeter
G1 X113.974 Y115.348 E0.01016 ; perimeter
G1 X114.292 Y115.253 E0.01540 ; perimeter
G1 X114.997 Y114.829 E0.03807 ; perimeter
G1 X115.096 Y114.802 E0.00479 ; perimeter
G1 X115.258 Y114.792 E0.00750 ; perimeter
G1 X115.345 Y114.823 E0.00427 ; perimeter
G1 X115.406 Y114.959 F10800.000 ; move inwards before travel
G1 X115.309 Y115.078 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288578
G1 F2400.000
G1 X115.188 Y115.194 E0.00343 ; infill
;WIDTH:0.387663
G1 X114.881 Y115.407 E0.01071 ; infill
G1 X114.358 Y115.625 E0.01625 ; infill
G1 X115.209 Y115.419 F10800.000 ; move to first infill point
;WIDTH:0.211242
G1 F2400.000
G1 X114.413 Y115.551 E0.01129 ; infill
;WIDTH:0.20068
G1 X114.301 Y115.562 E0.00147 ; infill
;WIDTH:0.158483
G1 X113.970 Y115.652 E0.00330 ; infill
G1 X113.702 Y115.660 F10800.000 ; move to first infill point
;WIDTH:0.317948
G1 F2400.000
G1 X112.711 Y115.736 E0.02274 ; infill
;WIDTH:0.309228
G1 X112.449 Y115.759 E0.00582 ; infill
;WIDTH:0.261941
G1 X112.066 Y115.760 E0.00697 ; infill
G1 X111.998 Y115.716 E0.00147 ; infill
;WIDTH:0.245139
G1 X111.947 Y115.679 E0.00105 ; infill
;LAYER_CHANGE
;Z:10.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;10.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.998 Y115.716 E-0.01655 ; wipe and retract
;WIPE_END
G1 E-2.38345 F2400.000 ; retract
G1 Z10.275 F10800.000 ; lift Z
G1 Z10.400 ; move to next layer (51)
;AFTER_LAYER_CHANGE
;10.4
G1 Z10.475 ; lift Z
G1 X103.148 Y108.180 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.851 Y107.881 E0.01427 ; perimeter
G1 X102.638 Y107.809 E0.00764 ; perimeter
G1 X102.202 Y107.581 E0.01663 ; perimeter
G1 X102.643 Y107.203 E0.01968 ; perimeter
G1 X102.504 Y106.435 E0.02642 ; perimeter
G1 X102.731 Y106.611 E0.00972 ; perimeter
G1 X102.816 Y106.712 E0.00447 ; perimeter
G1 X102.810 Y106.841 E0.00439 ; perimeter
G1 X103.118 Y107.216 E0.01644 ; perimeter
G1 X103.153 Y107.313 E0.00346 ; perimeter
G1 X103.136 Y107.425 E0.00385 ; perimeter
G1 X103.176 Y107.642 E0.00747 ; perimeter
G1 X103.102 Y107.968 E0.01131 ; perimeter
G1 X103.135 Y108.121 E0.00531 ; perimeter
G1 X103.414 Y109.033 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.683 Y109.464 E0.01721 ; perimeter
G1 X103.137 Y109.558 E0.01874 ; perimeter
G1 X103.415 Y109.093 E0.01831 ; perimeter
G1 X104.623 Y109.748 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X104.930 Y109.794 E0.01049 ; perimeter
G1 X104.943 Y110.014 E0.00746 ; perimeter
G1 X104.858 Y110.215 E0.00739 ; perimeter
G1 X104.820 Y110.411 E0.00677 ; perimeter
G1 X104.747 Y109.795 E0.02099 ; perimeter
G1 X104.679 Y109.769 E0.00245 ; perimeter
G1 X104.736 Y111.437 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X104.748 Y111.490 E0.00182 ; perimeter
G1 X104.736 Y111.480 E0.00054 ; perimeter
G1 X105.775 Y112.594 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X105.936 Y112.607 E0.00547 ; perimeter
G1 X106.180 Y112.733 E0.00929 ; perimeter
G1 X106.313 Y112.731 E0.00450 ; perimeter
G1 X106.233 Y112.854 E0.00499 ; perimeter
G1 X105.854 Y113.231 E0.01809 ; perimeter
G1 X105.847 Y113.112 E0.00406 ; perimeter
G1 X105.904 Y112.863 E0.00862 ; perimeter
G1 X105.801 Y112.648 E0.00807 ; perimeter
G1 X105.397 Y112.920 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.202 Y112.515 E0.02079 ; perimeter
G1 X104.935 Y112.174 E0.02007 ; perimeter
G1 X104.710 Y112.071 E0.01146 ; perimeter
G1 X104.512 Y111.917 E0.01163 ; perimeter
G1 X103.786 Y111.920 E0.03363 ; perimeter
G1 X103.520 Y111.944 E0.01236 ; perimeter
G1 X103.521 Y111.915 E0.00134 ; perimeter
G1 X104.086 Y111.479 E0.03305 ; perimeter
G1 X104.331 Y111.172 E0.01820 ; perimeter
G1 X104.344 Y110.869 E0.01405 ; perimeter
G1 X104.409 Y110.717 E0.00765 ; perimeter
G1 X104.325 Y110.441 E0.01334 ; perimeter
G1 X104.296 Y110.138 E0.01413 ; perimeter
G1 X103.777 Y109.937 E0.02574 ; perimeter
G1 X103.030 Y110.065 E0.03510 ; perimeter
G1 X102.454 Y110.125 E0.02686 ; perimeter
G1 X102.048 Y110.086 E0.01885 ; perimeter
G1 X101.888 Y109.993 E0.00861 ; perimeter
G1 X101.877 Y109.969 E0.00122 ; perimeter
G1 X101.914 Y109.862 E0.00525 ; perimeter
G1 X102.016 Y109.755 E0.00684 ; perimeter
G1 X102.439 Y109.438 E0.02450 ; perimeter
G1 X102.710 Y109.331 E0.01350 ; perimeter
G1 X102.930 Y108.978 E0.01925 ; perimeter
G1 X102.923 Y108.637 E0.01583 ; perimeter
G1 X102.589 Y108.301 E0.02193 ; perimeter
G1 X102.436 Y108.249 E0.00750 ; perimeter
G1 X102.236 Y108.132 E0.01076 ; perimeter
G1 X102.006 Y108.034 E0.01158 ; perimeter
G1 X101.833 Y107.910 E0.00985 ; perimeter
G1 X101.653 Y107.743 E0.01137 ; perimeter
G1 X101.602 Y107.601 E0.00697 ; perimeter
G1 X101.652 Y107.483 E0.00594 ; perimeter
G1 X101.846 Y107.251 E0.01400 ; perimeter
G1 X102.120 Y107.017 E0.01670 ; perimeter
G1 X101.984 Y106.269 E0.03522 ; perimeter
G1 X101.988 Y105.766 E0.02327 ; perimeter
G1 X101.854 Y105.513 E0.01325 ; perimeter
G1 X101.652 Y105.258 E0.01507 ; perimeter
G1 X101.553 Y105.190 E0.00556 ; perimeter
G1 X101.496 Y105.103 E0.00482 ; perimeter
G1 X101.458 Y104.823 E0.01310 ; perimeter
G1 X101.555 Y104.411 E0.01963 ; perimeter
G1 X101.697 Y104.245 E0.01010 ; perimeter
G1 X101.740 Y104.153 E0.00468 ; perimeter
G1 X101.805 Y104.119 E0.00341 ; perimeter
G1 X101.904 Y104.150 E0.00482 ; perimeter
G1 X101.960 Y104.311 E0.00791 ; perimeter
G1 X102.118 Y104.417 E0.00882 ; perimeter
G1 X102.227 Y104.590 E0.00944 ; perimeter
G1 X102.270 Y104.770 E0.00860 ; perimeter
G1 X102.287 Y104.967 E0.00916 ; perimeter
G1 X102.259 Y105.501 E0.02473 ; perimeter
G1 X102.403 Y105.747 E0.01325 ; perimeter
G1 X103.068 Y106.261 E0.03891 ; perimeter
G1 X103.307 Y106.547 E0.01727 ; perimeter
G1 X103.300 Y106.679 E0.00611 ; perimeter
G1 X103.544 Y106.975 E0.01774 ; perimeter
G1 X103.647 Y107.264 E0.01421 ; perimeter
G1 X103.625 Y107.417 E0.00717 ; perimeter
G1 X103.668 Y107.653 E0.01112 ; perimeter
G1 X103.596 Y107.970 E0.01506 ; perimeter
G1 X103.650 Y108.217 E0.01173 ; perimeter
G1 X103.686 Y108.560 E0.01600 ; perimeter
G1 X104.001 Y109.064 E0.02750 ; perimeter
G1 X104.600 Y109.263 E0.02921 ; perimeter
G1 X104.818 Y109.278 E0.01012 ; perimeter
G1 X105.331 Y109.385 E0.02427 ; perimeter
G1 X105.497 Y109.518 E0.00986 ; perimeter
G1 X105.515 Y109.587 E0.00331 ; perimeter
G1 X105.414 Y109.815 E0.01156 ; perimeter
G1 X105.429 Y110.056 E0.01119 ; perimeter
G1 X105.386 Y110.234 E0.00847 ; perimeter
G1 X105.318 Y110.371 E0.00706 ; perimeter
G1 X105.232 Y110.817 E0.02108 ; perimeter
G1 X105.133 Y111.145 E0.01585 ; perimeter
G1 X105.208 Y111.310 E0.00841 ; perimeter
G1 X105.249 Y111.571 E0.01221 ; perimeter
G1 X105.859 Y112.117 E0.03795 ; perimeter
G1 X106.071 Y112.134 E0.00985 ; perimeter
G1 X106.293 Y112.249 E0.01159 ; perimeter
G1 X106.497 Y112.246 E0.00942 ; perimeter
G1 X106.591 Y112.279 E0.00466 ; perimeter
G1 X106.807 Y112.310 E0.01007 ; perimeter
G1 X106.874 Y112.382 E0.00455 ; perimeter
G1 X106.900 Y112.530 E0.00698 ; perimeter
G1 X106.843 Y112.783 E0.01201 ; perimeter
G1 X106.656 Y113.096 E0.01688 ; perimeter
G1 X106.293 Y113.493 E0.02493 ; perimeter
G1 X105.784 Y113.916 E0.03065 ; perimeter
G1 X105.400 Y114.176 E0.02147 ; perimeter
G1 X105.165 Y114.365 E0.01396 ; perimeter
G1 X104.803 Y114.529 E0.01843 ; perimeter
G1 X104.639 Y114.538 E0.00760 ; perimeter
G1 X104.882 Y114.075 E0.02420 ; perimeter
G1 X104.885 Y114.035 E0.00187 ; perimeter
G1 X105.372 Y113.253 E0.04268 ; perimeter
G1 X105.362 Y113.070 E0.00851 ; perimeter
G1 X105.383 Y112.978 E0.00434 ; perimeter
G1 X105.676 Y112.634 F10800.000 ; move inwards before travel
G1 X105.537 Y112.334 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.281154
G1 F2400.000
G1 X105.347 Y112.130 E0.00552 ; infill
;WIDTH:0.247694
G1 X105.156 Y111.927 E0.00475 ; infill
;WIDTH:0.214234
G1 X105.144 Y111.915 E0.00024 ; infill
G1 X105.105 Y111.940 E0.00066 ; infill
;WIDTH:0.173397
G1 X105.066 Y111.965 E0.00050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.105 Y111.940 E-0.01225 ; wipe and retract
;WIPE_END
G1 E-2.38775 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X103.958 Y109.749 ; move to first infill point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.237411
G1 F2400.000
G1 X104.026 Y109.733 E0.00113 ; infill
;WIDTH:0.277398
G1 X104.093 Y109.717 E0.00136 ; infill
;WIDTH:0.317385
G1 X104.161 Y109.701 E0.00159 ; infill
;WIDTH:0.357373
G1 X104.229 Y109.685 E0.00182 ; infill
;WIDTH:0.387006
G1 X104.238 Y109.578 E0.00308 ; infill
G1 X103.897 Y109.283 E0.01290 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.238 Y109.578 E-0.11896 ; wipe and retract
G1 X104.229 Y109.685 E-0.02842 ; wipe and retract
;WIPE_END
G1 E-2.25262 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X102.028 Y105.295 ; move to first infill point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.319095
G1 F2400.000
G1 X101.879 Y104.924 E0.00919 ; infill
G1 X101.887 Y104.553 E0.00853 ; infill
G1 X101.822 Y104.510 F10800.000 ; move to first infill point
;WIDTH:0.315473
G1 F2400.000
G1 X101.867 Y104.705 E0.00453 ; infill
G1 X101.920 Y105.208 E0.01148 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.867 Y104.705 E-0.13366 ; wipe and retract
G1 X101.822 Y104.510 E-0.05281 ; wipe and retract
;WIPE_END
G1 E-2.21354 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X101.239 Y101.854 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.186 Y101.747 E0.00406 ; perimeter
G1 X101.188 Y101.682 E0.00218 ; perimeter
G1 X101.222 Y101.797 E0.00404 ; perimeter
G1 X100.521 Y99.984 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X100.343 Y99.856 E0.00741 ; perimeter
G1 X100.504 Y99.828 E0.00554 ; perimeter
G1 X100.521 Y99.924 E0.00327 ; perimeter
G1 X100.899 Y99.286 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.892 Y99.450 E0.00758 ; perimeter
G1 X101.003 Y99.813 E0.01760 ; perimeter
G1 X101.003 Y100.045 E0.01076 ; perimeter
G1 X101.064 Y100.274 E0.01095 ; perimeter
G1 X101.194 Y100.491 E0.01174 ; perimeter
G1 X101.320 Y100.805 E0.01566 ; perimeter
G1 X101.511 Y101.176 E0.01932 ; perimeter
G1 X101.627 Y101.467 E0.01451 ; perimeter
G1 X101.794 Y102.027 E0.02706 ; perimeter
G1 X101.775 Y102.371 E0.01596 ; perimeter
G1 X101.719 Y102.486 E0.00593 ; perimeter
G1 X101.593 Y102.521 E0.00608 ; perimeter
G1 X101.223 Y102.441 E0.01751 ; perimeter
G1 X100.857 Y102.172 E0.02103 ; perimeter
G1 X100.714 Y101.877 E0.01517 ; perimeter
G1 X100.718 Y101.325 E0.02558 ; perimeter
G1 X100.691 Y100.925 E0.01859 ; perimeter
G1 X100.539 Y100.589 E0.01707 ; perimeter
G1 X100.111 Y100.283 E0.02440 ; perimeter
G1 X99.836 Y100.177 E0.01363 ; perimeter
G1 X99.739 Y100.071 E0.00666 ; perimeter
G1 X99.683 Y99.901 E0.00827 ; perimeter
G1 X99.698 Y99.735 E0.00770 ; perimeter
G1 X99.806 Y99.522 E0.01107 ; perimeter
G1 X100.257 Y99.370 E0.02206 ; perimeter
G1 X100.840 Y99.296 E0.02720 ; perimeter
G1 X100.823 Y99.431 F10800.000 ; move inwards before travel
G1 X100.785 Y100.255 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.127051
G1 F2400.000
G1 X100.943 Y101.080 E0.00588 ; infill
G1 X101.149 Y101.444 F10800.000 ; move to first infill point
;WIDTH:0.21969
G1 F2400.000
G1 X101.003 Y100.860 E0.00885 ; infill
;WIDTH:0.191852
G1 X100.761 Y100.352 E0.00696 ; infill
G1 X100.059 Y99.979 F10800.000 ; move to first infill point
;WIDTH:0.108533
G1 F2400.000
G1 X99.956 Y99.899 E0.00072 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.059 Y99.979 E-0.03460 ; wipe and retract
;WIPE_END
G1 E-2.36540 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X100.980 Y96.734 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.938 Y96.652 E0.00312 ; perimeter
G1 X100.965 Y96.644 E0.00096 ; perimeter
G1 X100.971 Y96.675 E0.00108 ; perimeter
G1 X101.424 Y96.475 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.476 Y96.758 E0.01333 ; perimeter
G1 X101.429 Y96.914 E0.00758 ; perimeter
G1 X101.487 Y97.110 E0.00944 ; perimeter
G1 X101.488 Y97.375 E0.01229 ; perimeter
G1 X101.509 Y97.469 E0.00446 ; perimeter
G1 X101.467 Y97.788 E0.01487 ; perimeter
G1 X101.421 Y97.890 E0.00521 ; perimeter
G1 X101.269 Y98.026 E0.00944 ; perimeter
G1 X101.246 Y98.075 E0.00253 ; perimeter
G1 X101.212 Y98.058 E0.00175 ; perimeter
G1 X101.160 Y97.924 E0.00668 ; perimeter
G1 X100.981 Y97.771 E0.01092 ; perimeter
G1 X100.841 Y97.576 E0.01111 ; perimeter
G1 X100.791 Y97.456 E0.00603 ; perimeter
G1 X100.639 Y97.211 E0.01335 ; perimeter
G1 X100.532 Y96.913 E0.01466 ; perimeter
G1 X100.419 Y96.753 E0.00909 ; perimeter
G1 X100.363 Y96.455 E0.01404 ; perimeter
G1 X100.381 Y96.403 E0.00256 ; perimeter
G1 X100.535 Y96.272 E0.00936 ; perimeter
G1 X101.351 Y96.019 E0.03955 ; perimeter
G1 X101.624 Y95.996 E0.01268 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.689 Y95.990 E0.00272 ; perimeter (bridge)
G1 X101.651 Y96.071 E0.00373 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.573 Y96.245 E0.00883 ; perimeter
G1 X101.457 Y96.424 E0.00987 ; perimeter
G1 X101.168 Y96.606 F10800.000 ; move inwards before travel
G1 X101.241 Y97.653 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.24925
G1 F2400.000
G1 X101.144 Y97.408 E0.00452 ; infill
G1 X101.043 Y96.973 E0.00765 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.144 Y97.408 E-0.11770 ; wipe and retract
G1 X101.241 Y97.653 E-0.06959 ; wipe and retract
;WIPE_END
G1 E-2.21271 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X105.841 Y98.169 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X106.040 Y98.214 E0.00690 ; perimeter
G1 X106.032 Y98.233 E0.00070 ; perimeter
G1 X105.894 Y98.198 E0.00482 ; perimeter
G1 X104.642 Y97.418 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.845 Y97.524 E0.01061 ; perimeter
G1 X105.042 Y97.709 E0.01254 ; perimeter
G1 X105.286 Y97.680 E0.01139 ; perimeter
G1 X105.631 Y97.722 E0.01608 ; perimeter
G1 X105.749 Y97.682 E0.00577 ; perimeter
G1 X105.980 Y97.693 E0.01074 ; perimeter
G1 X106.413 Y97.823 E0.02095 ; perimeter
G1 X106.516 Y97.986 E0.00891 ; perimeter
G1 X106.541 Y98.278 E0.01357 ; perimeter
G1 X106.496 Y98.376 E0.00502 ; perimeter
G1 X106.493 Y98.444 E0.00312 ; perimeter
G1 X106.412 Y98.532 E0.00558 ; perimeter
G1 X106.356 Y98.657 E0.00631 ; perimeter
G1 X106.242 Y98.743 E0.00662 ; perimeter
G1 X106.119 Y98.753 E0.00572 ; perimeter
G1 X105.701 Y98.646 E0.01997 ; perimeter
G1 X105.358 Y98.442 E0.01852 ; perimeter
G1 X104.979 Y98.324 E0.01839 ; perimeter
G1 X104.760 Y98.180 E0.01210 ; perimeter
G1 X104.467 Y98.059 E0.01469 ; perimeter
G1 X104.008 Y97.670 E0.02786 ; perimeter
G1 X103.903 Y97.537 E0.00788 ; perimeter
G1 X103.826 Y97.384 E0.00792 ; perimeter
G1 X103.791 Y97.213 E0.00806 ; perimeter
G1 X103.662 Y96.845 E0.01809 ; perimeter
G1 X103.592 Y96.774 E0.00463 ; perimeter
G1 X103.482 Y96.581 E0.01027 ; perimeter
G1 X103.459 Y96.440 E0.00664 ; perimeter
G1 X103.338 Y96.252 E0.01032 ; perimeter
G1 X103.239 Y96.158 E0.00634 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.158 Y96.080 E0.00471 ; perimeter (bridge)
G1 X103.252 Y96.055 E0.00406 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.443 Y96.003 E0.00918 ; perimeter
G1 X104.138 Y96.162 E0.03304 ; perimeter
G1 X104.270 Y96.269 E0.00785 ; perimeter
G1 X104.351 Y96.443 E0.00890 ; perimeter
G1 X104.450 Y96.578 E0.00776 ; perimeter
G1 X104.475 Y96.651 E0.00357 ; perimeter
G1 X104.629 Y97.359 E0.03355 ; perimeter
G1 X104.586 Y97.640 F10800.000 ; move inwards before travel
G1 X104.406 Y97.625 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.155516
G1 F2400.000
G1 X104.042 Y97.238 E0.00498 ; infill
G1 X104.266 Y96.825 F10800.000 ; move to first infill point
;WIDTH:0.105877
G1 F2400.000
G1 X103.670 Y96.302 E0.00415 ; infill
G1 X103.941 Y96.540 F10800.000 ; move to first infill point
;WIDTH:0.386037
G1 F2400.000
G1 X103.984 Y96.602 E0.00216 ; infill
;WIDTH:0.360441
G1 X104.076 Y96.769 E0.00502 ; infill
G1 X104.169 Y97.099 E0.00904 ; infill
;WIDTH:0.349358
G1 X104.202 Y97.253 E0.00404 ; infill
G1 X104.336 Y97.632 E0.01024 ; infill
G1 X104.406 Y97.625 F10800.000 ; move to first infill point
;WIDTH:0.175785
G1 F2400.000
G1 X104.522 Y97.702 E0.00154 ; infill
;WIDTH:0.20465
G1 X104.771 Y97.863 E0.00399 ; infill
;WIDTH:0.105153
G1 X105.108 Y98.111 E0.00216 ; infill
G1 X104.811 Y97.940 F10800.000 ; move to first infill point
;WIDTH:0.266502
G1 F2400.000
G1 X105.473 Y98.083 E0.01259 ; infill
G1 X105.560 Y98.267 E0.00378 ; infill
G1 X105.573 Y98.225 F10800.000 ; move to first infill point
;WIDTH:0.100354
G1 F2400.000
G1 X104.591 Y97.848 E0.00502 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.573 Y98.225 E-0.27755 ; wipe and retract
;WIPE_END
G1 E-2.12245 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X109.062 Y99.191 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.206 Y99.310 E0.00864 ; perimeter
G1 X109.278 Y99.571 E0.01255 ; perimeter
G1 X109.238 Y99.878 E0.01436 ; perimeter
G1 X109.087 Y99.996 E0.00886 ; perimeter
G1 X108.955 Y100.040 E0.00647 ; perimeter
G1 X108.765 Y99.987 E0.00911 ; perimeter
G1 X108.608 Y99.905 E0.00819 ; perimeter
G1 X108.493 Y99.703 E0.01078 ; perimeter
G1 X108.476 Y99.507 E0.00914 ; perimeter
G1 X108.554 Y99.321 E0.00934 ; perimeter
G1 X108.716 Y99.198 E0.00944 ; perimeter
G1 X108.967 Y99.161 E0.01174 ; perimeter
G1 X109.005 Y99.172 E0.00183 ; perimeter
G1 X109.075 Y99.377 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.206 Y99.310 E-0.06422 ; wipe and retract
G1 X109.278 Y99.571 E-0.07147 ; wipe and retract
G1 X109.238 Y99.878 E-0.08178 ; wipe and retract
G1 X109.087 Y99.996 E-0.05047 ; wipe and retract
G1 X108.955 Y100.040 E-0.03685 ; wipe and retract
G1 X108.765 Y99.987 E-0.05189 ; wipe and retract
G1 X108.608 Y99.905 E-0.04668 ; wipe and retract
G1 X108.493 Y99.703 E-0.06140 ; wipe and retract
G1 X108.476 Y99.507 E-0.05209 ; wipe and retract
G1 X108.554 Y99.321 E-0.05322 ; wipe and retract
G1 X108.716 Y99.198 E-0.05375 ; wipe and retract
G1 X108.967 Y99.161 E-0.06687 ; wipe and retract
G1 X109.005 Y99.172 E-0.01041 ; wipe and retract
;WIPE_END
G1 E-1.69889 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X111.129 Y101.985 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.295 Y101.862 E0.00698 ; perimeter
G1 X111.300 Y102.238 E0.01272 ; perimeter
G1 X111.153 Y102.040 E0.00832 ; perimeter
G1 X111.477 Y101.196 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.531 Y101.214 E0.00264 ; perimeter
G1 X111.703 Y101.368 E0.01070 ; perimeter
G1 X111.782 Y101.636 E0.01291 ; perimeter
G1 X111.772 Y102.085 E0.02084 ; perimeter
G1 X111.806 Y102.454 E0.01713 ; perimeter
G1 X111.742 Y102.717 E0.01255 ; perimeter
G1 X111.625 Y102.799 E0.00661 ; perimeter
G1 X111.434 Y102.825 E0.00893 ; perimeter
G1 X111.270 Y102.793 E0.00774 ; perimeter
G1 X111.002 Y102.629 E0.01454 ; perimeter
G1 X110.747 Y102.315 E0.01875 ; perimeter
G1 X110.620 Y102.024 E0.01468 ; perimeter
G1 X110.622 Y101.829 E0.00902 ; perimeter
G1 X110.766 Y101.648 E0.01073 ; perimeter
G1 X110.948 Y101.527 E0.01013 ; perimeter
G1 X111.162 Y101.321 E0.01375 ; perimeter
G1 X111.236 Y101.299 E0.00360 ; perimeter
G1 X111.344 Y101.189 E0.00714 ; perimeter
G1 X111.417 Y101.192 E0.00342 ; perimeter
G1 X111.501 Y101.247 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.531 Y101.214 E-0.03060 ; wipe and retract
G1 X111.703 Y101.368 E-0.06093 ; wipe and retract
G1 X111.782 Y101.636 E-0.07357 ; wipe and retract
G1 X111.772 Y102.085 E-0.11870 ; wipe and retract
G1 X111.806 Y102.454 E-0.09760 ; wipe and retract
G1 X111.742 Y102.717 E-0.07147 ; wipe and retract
G1 X111.625 Y102.799 E-0.03763 ; wipe and retract
G1 X111.434 Y102.825 E-0.05089 ; wipe and retract
G1 X111.270 Y102.793 E-0.04412 ; wipe and retract
G1 X111.002 Y102.629 E-0.08285 ; wipe and retract
G1 X110.747 Y102.315 E-0.10684 ; wipe and retract
G1 X110.620 Y102.024 E-0.08362 ; wipe and retract
G1 X110.622 Y101.829 E-0.05139 ; wipe and retract
G1 X110.766 Y101.648 E-0.06114 ; wipe and retract
G1 X110.948 Y101.527 E-0.05771 ; wipe and retract
G1 X111.162 Y101.321 E-0.07830 ; wipe and retract
G1 X111.236 Y101.299 E-0.02050 ; wipe and retract
G1 X111.344 Y101.189 E-0.04069 ; wipe and retract
G1 X111.417 Y101.192 E-0.01950 ; wipe and retract
;WIPE_END
G1 E-1.21194 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X115.153 Y102.851 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.201 Y102.950 E0.00507 ; perimeter
G1 X115.208 Y103.166 E0.00999 ; perimeter
G1 X115.186 Y103.247 E0.00390 ; perimeter
G1 X115.098 Y103.379 E0.00737 ; perimeter
G1 X114.940 Y103.453 E0.00806 ; perimeter
G1 X114.711 Y103.440 E0.01066 ; perimeter
G1 X114.548 Y103.397 E0.00778 ; perimeter
G1 X114.180 Y103.088 E0.02226 ; perimeter
G1 X114.032 Y102.866 E0.01235 ; perimeter
G1 X113.962 Y102.597 E0.01287 ; perimeter
G1 X114.006 Y102.363 E0.01102 ; perimeter
G1 X114.137 Y102.298 E0.00675 ; perimeter
G1 X114.324 Y102.300 E0.00866 ; perimeter
G1 X114.413 Y102.304 E0.00417 ; perimeter
G1 X114.598 Y102.373 E0.00915 ; perimeter
G1 X114.727 Y102.449 E0.00692 ; perimeter
G1 X115.117 Y102.803 E0.02441 ; perimeter
G1 X115.104 Y102.950 F10800.000 ; move inwards before travel
G1 X114.957 Y102.999 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311572
G1 F2400.000
G1 X114.810 Y103.051 E0.00348 ; infill
G1 X114.739 Y103.015 E0.00177 ; infill
;WIDTH:0.408063
G1 X114.499 Y102.800 E0.00978 ; infill
;WIDTH:0.389219
G1 X114.477 Y102.775 E0.00096 ; infill
;WIDTH:0.377158
G1 X114.217 Y102.546 E0.00962 ; infill
G1 X114.216 Y102.552 F10800.000 ; move to first infill point
;WIDTH:0.267084
G1 F2400.000
G1 X114.959 Y103.153 E0.01781 ; infill
G1 X115.457 Y105.050 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.647 Y105.066 E0.00886 ; perimeter
G1 X115.763 Y105.179 E0.00750 ; perimeter
G1 X115.876 Y105.436 E0.01301 ; perimeter
G1 X115.910 Y106.114 E0.03142 ; perimeter
G1 X115.888 Y106.249 E0.00634 ; perimeter
G1 X115.804 Y106.446 E0.00992 ; perimeter
G1 X115.669 Y106.594 E0.00928 ; perimeter
G1 X115.516 Y106.650 E0.00756 ; perimeter
G1 X115.397 Y106.622 E0.00566 ; perimeter
G1 X115.276 Y106.532 E0.00698 ; perimeter
G1 X115.127 Y106.295 E0.01300 ; perimeter
G1 X115.104 Y106.035 E0.01205 ; perimeter
G1 X115.131 Y105.600 E0.02019 ; perimeter
G1 X115.174 Y105.360 E0.01129 ; perimeter
G1 X115.215 Y105.269 E0.00462 ; perimeter
G1 X115.313 Y105.149 E0.00719 ; perimeter
G1 X115.389 Y105.122 E0.00374 ; perimeter
G1 X115.416 Y105.092 E0.00185 ; perimeter
G1 X115.575 Y105.200 F10800.000 ; move inwards before travel
G1 X115.557 Y105.309 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.118833
G1 F2400.000
G1 X115.348 Y105.989 E0.00449 ; infill
G1 X115.470 Y106.376 F10800.000 ; move to first infill point
;WIDTH:0.347402
G1 F2400.000
G1 X115.508 Y106.139 E0.00607 ; infill
G1 X115.507 Y105.646 E0.01249 ; infill
;WIDTH:0.317449
G1 X115.528 Y105.329 E0.00725 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.507 Y105.646 E-0.08385 ; wipe and retract
;WIPE_END
G1 E-2.31615 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X115.550 Y110.529 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.724 Y110.586 E0.00844 ; perimeter
G1 X115.799 Y110.654 E0.00469 ; perimeter
G1 X115.881 Y110.888 E0.01151 ; perimeter
G1 X115.877 Y111.064 E0.00814 ; perimeter
G1 X115.821 Y111.238 E0.00844 ; perimeter
G1 X115.678 Y111.384 E0.00949 ; perimeter
G1 X115.554 Y111.423 E0.00602 ; perimeter
G1 X115.434 Y111.419 E0.00558 ; perimeter
G1 X115.305 Y111.359 E0.00660 ; perimeter
G1 X115.239 Y111.290 E0.00440 ; perimeter
G1 X115.183 Y111.159 E0.00663 ; perimeter
G1 X115.150 Y111.006 E0.00722 ; perimeter
G1 X115.157 Y110.863 E0.00664 ; perimeter
G1 X115.241 Y110.658 E0.01024 ; perimeter
G1 X115.420 Y110.540 E0.00993 ; perimeter
G1 X115.491 Y110.534 E0.00330 ; perimeter
G1 X115.629 Y110.694 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.724 Y110.586 E-0.06300 ; wipe and retract
G1 X115.799 Y110.654 E-0.02671 ; wipe and retract
G1 X115.881 Y110.888 E-0.06557 ; wipe and retract
G1 X115.877 Y111.064 E-0.04636 ; wipe and retract
G1 X115.821 Y111.238 E-0.04808 ; wipe and retract
G1 X115.678 Y111.384 E-0.05409 ; wipe and retract
G1 X115.554 Y111.423 E-0.03428 ; wipe and retract
G1 X115.434 Y111.419 E-0.03181 ; wipe and retract
G1 X115.305 Y111.359 E-0.03761 ; wipe and retract
G1 X115.239 Y111.290 E-0.02505 ; wipe and retract
G1 X115.183 Y111.159 E-0.03779 ; wipe and retract
G1 X115.150 Y111.006 E-0.04115 ; wipe and retract
G1 X115.157 Y110.863 E-0.03780 ; wipe and retract
G1 X115.241 Y110.658 E-0.05836 ; wipe and retract
G1 X115.420 Y110.540 E-0.05659 ; wipe and retract
G1 X115.491 Y110.534 E-0.01881 ; wipe and retract
;WIPE_END
G1 E-1.71695 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 X115.412 Y114.831 ; move to first perimeter point
G1 Z10.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.500 Y114.899 E0.00514 ; perimeter
G1 X115.552 Y114.975 E0.00425 ; perimeter
G1 X115.589 Y115.094 E0.00577 ; perimeter
G1 X115.595 Y115.222 E0.00595 ; perimeter
G1 X115.562 Y115.363 E0.00671 ; perimeter
G1 X115.527 Y115.430 E0.00350 ; perimeter
G1 X115.352 Y115.611 E0.01166 ; perimeter
G1 X114.992 Y115.848 E0.01994 ; perimeter
G1 X114.688 Y115.918 E0.01445 ; perimeter
G1 X114.460 Y115.906 E0.01056 ; perimeter
G1 X113.846 Y116.042 E0.02918 ; perimeter
G1 X113.335 Y116.097 E0.02379 ; perimeter
G1 X113.206 Y116.061 E0.00620 ; perimeter
G1 X112.985 Y116.047 E0.01029 ; perimeter
G1 X112.899 Y116.012 E0.00430 ; perimeter
G1 X112.456 Y116.052 E0.02058 ; perimeter
G1 X112.185 Y116.134 E0.01309 ; perimeter
G1 X111.954 Y116.127 E0.01073 ; perimeter
G1 X111.779 Y116.043 E0.00898 ; perimeter
G1 X111.675 Y115.881 E0.00892 ; perimeter
G1 X111.653 Y115.801 E0.00387 ; perimeter
G1 X111.672 Y115.642 E0.00742 ; perimeter
G1 X111.740 Y115.510 E0.00686 ; perimeter
G1 X111.809 Y115.459 E0.00397 ; perimeter
G1 X111.944 Y115.405 E0.00672 ; perimeter
G1 X112.081 Y115.388 E0.00640 ; perimeter
G1 X112.507 Y115.427 E0.01985 ; perimeter
G1 X113.111 Y115.320 E0.02839 ; perimeter
G1 X113.638 Y115.254 E0.02463 ; perimeter
G1 X113.972 Y115.272 E0.01547 ; perimeter
G1 X114.320 Y115.208 E0.01641 ; perimeter
G1 X114.724 Y114.996 E0.02111 ; perimeter
G1 X115.006 Y114.817 E0.01546 ; perimeter
G1 X115.099 Y114.790 E0.00452 ; perimeter
G1 X115.290 Y114.782 E0.00883 ; perimeter
G1 X115.357 Y114.809 E0.00334 ; perimeter
G1 X115.417 Y114.942 F10800.000 ; move inwards before travel
G1 X115.230 Y115.390 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.28261
G1 F2400.000
G1 X114.421 Y115.551 E0.01644 ; infill
;WIDTH:0.272064
G1 X114.010 Y115.634 E0.00799 ; infill
G1 X113.782 Y115.655 E0.00436 ; infill
;WIDTH:0.366211
G1 X113.367 Y115.691 E0.01119 ; infill
G1 X112.969 Y115.682 F10800.000 ; move to first infill point
;WIDTH:0.225112
G1 F2400.000
G1 X112.927 Y115.683 E0.00064 ; infill
;WIDTH:0.211401
G1 X112.530 Y115.736 E0.00562 ; infill
;WIDTH:0.178296
G1 X112.262 Y115.751 E0.00302 ; infill
;WIDTH:0.297957
G1 X112.036 Y115.761 E0.00480 ; infill
;WIDTH:0.290752
G1 X112.013 Y115.757 E0.00047 ; infill
;WIDTH:0.265
G1 X111.921 Y115.686 E0.00215 ; infill
;LAYER_CHANGE
;Z:10.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;10.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.013 Y115.757 E-0.03067 ; wipe and retract
;WIPE_END
G1 E-2.36933 F2400.000 ; retract
G1 Z10.475 F10800.000 ; lift Z
G1 Z10.600 ; move to next layer (52)
;AFTER_LAYER_CHANGE
;10.6
G1 Z10.675 ; lift Z
G1 X103.224 Y108.307 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.158 Y108.241 E0.00317 ; perimeter
G1 X102.977 Y107.944 E0.01177 ; perimeter
G1 X102.594 Y107.716 E0.01508 ; perimeter
G1 X102.495 Y107.637 E0.00429 ; perimeter
G1 X102.753 Y107.272 E0.01514 ; perimeter
G1 X102.709 Y106.706 E0.01922 ; perimeter
G1 X102.665 Y106.490 E0.00747 ; perimeter
G1 X102.883 Y106.666 E0.00950 ; perimeter
G1 X103.148 Y106.977 E0.01382 ; perimeter
G1 X103.348 Y107.103 E0.00801 ; perimeter
G1 X103.441 Y107.225 E0.00519 ; perimeter
G1 X103.411 Y107.254 E0.00140 ; perimeter
G1 X103.318 Y107.684 E0.01489 ; perimeter
G1 X103.226 Y107.847 E0.00630 ; perimeter
G1 X103.224 Y108.247 E0.01357 ; perimeter
G1 X103.421 Y109.006 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.710 Y109.462 E0.01827 ; perimeter
G1 X103.839 Y109.493 E0.00450 ; perimeter
G1 X103.239 Y109.492 E0.02031 ; perimeter
G1 X103.283 Y109.309 E0.00637 ; perimeter
G1 X103.412 Y109.064 E0.00937 ; perimeter
G1 X103.940 Y109.517 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X104.513 Y109.652 E0.01991 ; perimeter
G1 X105.103 Y109.694 E0.02003 ; perimeter
G1 X104.864 Y110.175 E0.01817 ; perimeter
G1 X104.840 Y110.257 E0.00287 ; perimeter
G1 X104.702 Y109.881 E0.01354 ; perimeter
G1 X104.330 Y109.641 E0.01500 ; perimeter
G1 X103.997 Y109.535 E0.01181 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.513 Y109.652 E-0.13944 ; wipe and retract
G1 X105.103 Y109.694 E-0.15618 ; wipe and retract
G1 X104.864 Y110.175 E-0.14165 ; wipe and retract
G1 X104.840 Y110.257 E-0.02239 ; wipe and retract
G1 X104.702 Y109.881 E-0.10557 ; wipe and retract
G1 X104.330 Y109.641 E-0.11696 ; wipe and retract
G1 X103.997 Y109.535 E-0.09210 ; wipe and retract
;WIPE_END
G1 E-1.62572 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X105.947 Y112.652 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.419 Y112.674 E0.01597 ; perimeter
G1 X106.173 Y112.920 E0.01178 ; perimeter
G1 X105.967 Y113.077 E0.00877 ; perimeter
G1 X105.995 Y112.728 E0.01186 ; perimeter
G1 X105.979 Y112.703 E0.00100 ; perimeter
G1 X105.502 Y112.849 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.121 Y112.238 E0.03333 ; perimeter
G1 X105.033 Y112.028 E0.01055 ; perimeter
G1 X104.776 Y111.824 E0.01520 ; perimeter
G1 X104.565 Y111.699 E0.01136 ; perimeter
G1 X104.551 Y111.653 E0.00224 ; perimeter
G1 X104.357 Y111.523 E0.01080 ; perimeter
G1 X104.467 Y111.177 E0.01681 ; perimeter
G1 X104.450 Y110.593 E0.02709 ; perimeter
G1 X104.306 Y110.199 E0.01945 ; perimeter
G1 X104.123 Y110.081 E0.01008 ; perimeter
G1 X103.790 Y109.975 E0.01616 ; perimeter
G1 X102.974 Y109.974 E0.03781 ; perimeter
G1 X102.714 Y110.000 E0.01211 ; perimeter
G1 X102.427 Y109.949 E0.01351 ; perimeter
G1 X102.287 Y109.864 E0.00757 ; perimeter
G1 X102.315 Y109.777 E0.00423 ; perimeter
G1 X102.464 Y109.570 E0.01181 ; perimeter
G1 X102.790 Y109.298 E0.01968 ; perimeter
G1 X102.829 Y109.138 E0.00763 ; perimeter
G1 X102.937 Y108.931 E0.01080 ; perimeter
G1 X102.932 Y108.698 E0.01082 ; perimeter
G1 X102.776 Y108.540 E0.01030 ; perimeter
G1 X102.628 Y108.297 E0.01317 ; perimeter
G1 X102.318 Y108.113 E0.01667 ; perimeter
G1 X102.085 Y107.926 E0.01386 ; perimeter
G1 X101.979 Y107.791 E0.00795 ; perimeter
G1 X101.950 Y107.672 E0.00566 ; perimeter
G1 X102.042 Y107.441 E0.01153 ; perimeter
G1 X102.259 Y107.136 E0.01735 ; perimeter
G1 X102.230 Y106.773 E0.01685 ; perimeter
G1 X102.129 Y106.277 E0.02347 ; perimeter
G1 X102.114 Y105.820 E0.02115 ; perimeter
G1 X101.994 Y105.570 E0.01285 ; perimeter
G1 X101.778 Y105.342 E0.01457 ; perimeter
G1 X101.593 Y105.215 E0.01037 ; perimeter
G1 X101.537 Y105.119 E0.00514 ; perimeter
G1 X101.487 Y104.862 E0.01215 ; perimeter
G1 X101.549 Y104.594 E0.01272 ; perimeter
G1 X101.691 Y104.440 E0.00973 ; perimeter
G1 X101.852 Y104.381 E0.00791 ; perimeter
G1 X101.911 Y104.413 E0.00313 ; perimeter
G1 X101.985 Y104.418 E0.00341 ; perimeter
G1 X102.109 Y104.493 E0.00673 ; perimeter
G1 X102.260 Y104.689 E0.01144 ; perimeter
G1 X102.296 Y104.798 E0.00533 ; perimeter
G1 X102.317 Y104.979 E0.00844 ; perimeter
G1 X102.278 Y105.549 E0.02649 ; perimeter
G1 X102.355 Y105.682 E0.00710 ; perimeter
G1 X102.500 Y105.829 E0.00957 ; perimeter
G1 X102.739 Y105.958 E0.01259 ; perimeter
G1 X103.045 Y106.165 E0.01708 ; perimeter
G1 X103.228 Y106.328 E0.01139 ; perimeter
G1 X103.467 Y106.608 E0.01705 ; perimeter
G1 X103.679 Y106.742 E0.01159 ; perimeter
G1 X103.819 Y106.926 E0.01071 ; perimeter
G1 X103.939 Y106.997 E0.00649 ; perimeter
G1 X104.011 Y107.196 E0.00977 ; perimeter
G1 X103.950 Y107.397 E0.00975 ; perimeter
G1 X103.852 Y107.495 E0.00639 ; perimeter
G1 X103.773 Y107.858 E0.01719 ; perimeter
G1 X103.708 Y107.974 E0.00619 ; perimeter
G1 X103.706 Y108.350 E0.01740 ; perimeter
G1 X103.733 Y108.599 E0.01160 ; perimeter
G1 X104.012 Y109.038 E0.02412 ; perimeter
G1 X104.586 Y109.174 E0.02731 ; perimeter
G1 X105.118 Y109.212 E0.02474 ; perimeter
G1 X105.274 Y109.203 E0.00722 ; perimeter
G1 X105.612 Y109.256 E0.01584 ; perimeter
G1 X105.791 Y109.383 E0.01020 ; perimeter
G1 X105.805 Y109.454 E0.00336 ; perimeter
G1 X105.677 Y109.742 E0.01456 ; perimeter
G1 X105.613 Y109.793 E0.00383 ; perimeter
G1 X105.527 Y109.924 E0.00724 ; perimeter
G1 X105.315 Y110.352 E0.02213 ; perimeter
G1 X105.189 Y110.778 E0.02060 ; perimeter
G1 X105.134 Y110.865 E0.00476 ; perimeter
G1 X104.982 Y111.234 E0.01848 ; perimeter
G1 X105.060 Y111.405 E0.00870 ; perimeter
G1 X105.065 Y111.617 E0.00984 ; perimeter
G1 X105.437 Y111.946 E0.02301 ; perimeter
G1 X105.579 Y111.999 E0.00701 ; perimeter
G1 X105.757 Y112.161 E0.01114 ; perimeter
G1 X106.410 Y112.191 E0.03025 ; perimeter
G1 X106.529 Y112.129 E0.00621 ; perimeter
G1 X106.879 Y112.095 E0.01628 ; perimeter
G1 X106.999 Y112.114 E0.00565 ; perimeter
G1 X107.063 Y112.181 E0.00429 ; perimeter
G1 X107.092 Y112.293 E0.00537 ; perimeter
G1 X107.051 Y112.553 E0.01219 ; perimeter
G1 X106.905 Y112.835 E0.01471 ; perimeter
G1 X106.754 Y113.027 E0.01132 ; perimeter
G1 X106.489 Y113.286 E0.01715 ; perimeter
G1 X106.151 Y113.543 E0.01966 ; perimeter
G1 X105.675 Y113.853 E0.02631 ; perimeter
G1 X105.223 Y114.077 E0.02338 ; perimeter
G1 X105.126 Y114.086 E0.00452 ; perimeter
G1 X105.184 Y113.977 E0.00573 ; perimeter
G1 X105.232 Y113.742 E0.01108 ; perimeter
G1 X105.359 Y113.468 E0.01402 ; perimeter
G1 X105.466 Y113.298 E0.00932 ; perimeter
G1 X105.497 Y112.908 E0.01808 ; perimeter
G1 X105.775 Y112.556 F10800.000 ; move inwards before travel
G1 X105.570 Y112.394 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.139291
G1 F2400.000
G1 X105.436 Y112.233 E0.00167 ; infill
;WIDTH:0.0995828
G1 X105.412 Y112.214 E0.00015 ; infill
G1 X104.799 Y111.558 F10800.000 ; move to first infill point
;WIDTH:0.106308
G1 F2400.000
G1 X104.781 Y111.469 E0.00048 ; infill
G1 X104.670 Y111.337 E0.00091 ; infill
G1 X104.710 Y111.154 F10800.000 ; move to first infill point
;WIDTH:0.286856
G1 F2400.000
G1 X104.860 Y110.497 E0.01367 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.710 Y111.154 E-0.17788 ; wipe and retract
;WIPE_END
G1 E-2.22212 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X106.539 Y112.418 ; move to first infill point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.119858
G1 F2400.000
G1 X106.609 Y112.402 E0.00046 ; infill
;WIDTH:0.145173
G1 X106.838 Y112.396 E0.00195 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.609 Y112.402 E-0.06045 ; wipe and retract
;WIPE_END
G1 E-2.33955 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X102.044 Y105.272 ; move to first infill point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.110333
G1 F2400.000
G1 X101.824 Y104.652 E0.00369 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.044 Y105.272 E-0.17360 ; wipe and retract
;WIPE_END
G1 E-2.22640 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X101.168 Y101.845 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.107 Y101.800 E0.00254 ; perimeter
G1 X101.110 Y101.672 E0.00434 ; perimeter
G1 X101.148 Y101.788 E0.00413 ; perimeter
G1 X100.427 Y100.270 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.246 Y100.340 E0.00896 ; perimeter
G1 X100.119 Y100.299 E0.00622 ; perimeter
G1 X100.006 Y100.349 E0.00572 ; perimeter
G1 X99.866 Y100.313 E0.00666 ; perimeter
G1 X99.688 Y100.219 E0.00934 ; perimeter
G1 X99.620 Y100.138 E0.00491 ; perimeter
G1 X99.544 Y99.930 E0.01025 ; perimeter
G1 X99.566 Y99.733 E0.00916 ; perimeter
G1 X99.681 Y99.540 E0.01044 ; perimeter
G1 X99.840 Y99.457 E0.00829 ; perimeter
G1 X99.973 Y99.419 E0.00643 ; perimeter
G1 X100.282 Y99.391 E0.01437 ; perimeter
G1 X100.445 Y99.449 E0.00799 ; perimeter
G1 X100.550 Y99.454 E0.00488 ; perimeter
G1 X100.668 Y99.558 E0.00728 ; perimeter
G1 X100.917 Y100.436 E0.04229 ; perimeter
G1 X101.019 Y100.507 E0.00575 ; perimeter
G1 X101.176 Y100.778 E0.01454 ; perimeter
G1 X101.244 Y100.845 E0.00439 ; perimeter
G1 X101.524 Y101.391 E0.02845 ; perimeter
G1 X101.685 Y101.874 E0.02359 ; perimeter
G1 X101.658 Y102.231 E0.01660 ; perimeter
G1 X101.627 Y102.277 E0.00255 ; perimeter
G1 X101.392 Y102.353 E0.01144 ; perimeter
G1 X101.132 Y102.360 E0.01206 ; perimeter
G1 X101.015 Y102.334 E0.00554 ; perimeter
G1 X100.855 Y102.212 E0.00933 ; perimeter
G1 X100.692 Y102.130 E0.00843 ; perimeter
G1 X100.608 Y101.945 E0.00941 ; perimeter
G1 X100.630 Y101.526 E0.01942 ; perimeter
G1 X100.771 Y101.306 E0.01212 ; perimeter
G1 X100.749 Y100.798 E0.02352 ; perimeter
G1 X100.686 Y100.659 E0.00706 ; perimeter
G1 X100.594 Y100.562 E0.00620 ; perimeter
G1 X100.456 Y100.322 E0.01284 ; perimeter
G1 X100.343 Y100.095 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.246 Y100.340 E-0.05562 ; wipe and retract
G1 X100.119 Y100.299 E-0.03544 ; wipe and retract
G1 X100.006 Y100.349 E-0.03259 ; wipe and retract
G1 X99.866 Y100.313 E-0.03795 ; wipe and retract
G1 X99.688 Y100.219 E-0.05319 ; wipe and retract
G1 X99.620 Y100.138 E-0.02797 ; wipe and retract
G1 X99.544 Y99.930 E-0.05840 ; wipe and retract
G1 X99.566 Y99.733 E-0.05218 ; wipe and retract
G1 X99.681 Y99.540 E-0.05947 ; wipe and retract
G1 X99.840 Y99.457 E-0.04722 ; wipe and retract
G1 X99.973 Y99.419 E-0.03664 ; wipe and retract
G1 X100.282 Y99.391 E-0.08189 ; wipe and retract
G1 X100.445 Y99.449 E-0.04550 ; wipe and retract
G1 X100.550 Y99.454 E-0.02781 ; wipe and retract
G1 X100.668 Y99.558 E-0.04147 ; wipe and retract
G1 X100.917 Y100.436 E-0.24092 ; wipe and retract
G1 X101.019 Y100.507 E-0.03274 ; wipe and retract
G1 X101.176 Y100.778 E-0.08284 ; wipe and retract
G1 X101.244 Y100.845 E-0.02502 ; wipe and retract
G1 X101.524 Y101.391 E-0.16206 ; wipe and retract
G1 X101.685 Y101.874 E-0.13440 ; wipe and retract
G1 X101.658 Y102.231 E-0.09455 ; wipe and retract
G1 X101.627 Y102.277 E-0.01451 ; wipe and retract
G1 X101.392 Y102.353 E-0.06518 ; wipe and retract
G1 X101.132 Y102.360 E-0.06873 ; wipe and retract
G1 X101.015 Y102.334 E-0.03156 ; wipe and retract
G1 X100.855 Y102.212 E-0.05317 ; wipe and retract
G1 X100.692 Y102.130 E-0.04803 ; wipe and retract
G1 X100.608 Y101.945 E-0.05359 ; wipe and retract
G1 X100.630 Y101.526 E-0.11063 ; wipe and retract
G1 X100.771 Y101.306 E-0.06904 ; wipe and retract
G1 X100.749 Y100.798 E-0.13399 ; wipe and retract
G1 X100.686 Y100.659 E-0.04025 ; wipe and retract
G1 X100.594 Y100.562 E-0.03530 ; wipe and retract
G1 X100.456 Y100.322 E-0.07318 ; wipe and retract
;WIPE_END
G1 E-0.13699 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X104.547 Y97.663 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.014 Y97.811 E0.02267 ; perimeter
G1 X105.390 Y97.766 E0.01755 ; perimeter
G1 X105.490 Y97.778 E0.00467 ; perimeter
G1 X105.810 Y97.709 E0.01513 ; perimeter
G1 X105.909 Y97.655 E0.00522 ; perimeter
G1 X106.122 Y97.663 E0.00991 ; perimeter
G1 X106.206 Y97.641 E0.00400 ; perimeter
G1 X106.555 Y97.726 E0.01665 ; perimeter
G1 X106.614 Y97.776 E0.00358 ; perimeter
G1 X106.676 Y97.905 E0.00662 ; perimeter
G1 X106.656 Y98.124 E0.01017 ; perimeter
G1 X106.529 Y98.349 E0.01199 ; perimeter
G1 X106.346 Y98.543 E0.01239 ; perimeter
G1 X106.243 Y98.595 E0.00530 ; perimeter
G1 X105.976 Y98.617 E0.01243 ; perimeter
G1 X105.799 Y98.571 E0.00846 ; perimeter
G1 X105.351 Y98.396 E0.02229 ; perimeter
G1 X104.984 Y98.159 E0.02024 ; perimeter
G1 X104.931 Y98.095 E0.00387 ; perimeter
G1 X104.803 Y97.845 E0.01298 ; perimeter
G1 X104.596 Y97.698 E0.01175 ; perimeter
G1 X104.901 Y97.850 F10800.000 ; move inwards before travel
G1 X103.963 Y96.464 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.910 Y96.409 E0.00260 ; perimeter
G1 X103.931 Y96.416 E0.00075 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.910 Y96.409 E-0.00587 ; wipe and retract
G1 X103.931 Y96.416 E-0.00587 ; wipe and retract
;WIPE_END
G1 E-2.38825 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X101.086 Y96.438 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.978 Y96.813 E0.01319 ; perimeter
G1 X100.767 Y96.536 E0.01177 ; perimeter
G1 X101.029 Y96.456 E0.00927 ; perimeter
G1 X101.577 Y96.488 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.470 Y96.817 E0.01604 ; perimeter
G1 X101.410 Y97.096 E0.01321 ; perimeter
G1 X101.401 Y97.341 E0.01139 ; perimeter
G1 X101.350 Y97.503 E0.00786 ; perimeter
G1 X101.240 Y97.664 E0.00902 ; perimeter
G1 X101.073 Y97.623 E0.00796 ; perimeter
G1 X100.965 Y97.541 E0.00626 ; perimeter
G1 X100.820 Y97.364 E0.01059 ; perimeter
G1 X100.760 Y97.322 E0.00340 ; perimeter
G1 X100.294 Y96.711 E0.03562 ; perimeter
G1 X100.141 Y96.562 E0.00989 ; perimeter
G1 X100.094 Y96.401 E0.00776 ; perimeter
G1 X100.125 Y96.301 E0.00485 ; perimeter
G1 X100.206 Y96.228 E0.00507 ; perimeter
G1 X100.484 Y96.118 E0.01383 ; perimeter
G1 X101.576 Y95.769 E0.05309 ; perimeter
G1 X101.962 Y95.687 E0.01829 ; perimeter
G1 X102.218 Y95.677 E0.01187 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.375 Y95.698 E0.00661 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.951 Y95.723 E0.02673 ; perimeter
G1 X103.530 Y95.824 E0.02722 ; perimeter
G1 X104.150 Y95.971 E0.02951 ; perimeter
G1 X104.336 Y96.126 E0.01119 ; perimeter
G1 X104.447 Y96.374 E0.01260 ; perimeter
G1 X104.500 Y96.829 E0.02125 ; perimeter
G1 X104.442 Y97.044 E0.01031 ; perimeter
G1 X104.490 Y97.254 E0.00999 ; perimeter
G1 X104.453 Y97.623 E0.01714 ; perimeter
G1 X104.304 Y97.567 E0.00738 ; perimeter
G1 X104.213 Y97.556 E0.00426 ; perimeter
G1 X104.046 Y97.441 E0.00937 ; perimeter
G1 X103.906 Y97.311 E0.00887 ; perimeter
G1 X103.846 Y97.191 E0.00622 ; perimeter
G1 X103.754 Y97.083 E0.00658 ; perimeter
G1 X103.675 Y96.858 E0.01102 ; perimeter
G1 X103.523 Y96.705 E0.01000 ; perimeter
G1 X103.459 Y96.592 E0.00603 ; perimeter
G1 X103.250 Y96.384 E0.01365 ; perimeter
G1 X102.911 Y96.174 E0.01847 ; perimeter
G1 X102.692 Y96.115 E0.01051 ; perimeter
G1 X102.607 Y96.069 E0.00444 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.558 Y96.043 E0.00236 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.522 Y96.024 E0.00186 ; perimeter
G1 X102.488 Y96.032 E0.00161 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.186 Y96.108 E0.01305 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.920 Y96.175 E0.01269 ; perimeter
G1 X101.621 Y96.447 E0.01872 ; perimeter
G1 X101.231 Y96.479 F10800.000 ; move inwards before travel
G1 X101.458 Y96.073 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.119446
G1 F2400.000
G1 X101.513 Y96.127 E0.00049 ; infill
G1 X101.719 Y96.005 E0.00152 ; infill
G1 X103.482 Y96.145 F10800.000 ; move to first infill point
;WIDTH:0.172278
G1 F2400.000
G1 X103.329 Y96.087 E0.00176 ; infill
;WIDTH:0.134599
G1 X103.175 Y96.029 E0.00125 ; infill
G1 X103.326 Y96.033 F10800.000 ; move to first infill point
;WIDTH:0.139434
G1 F2400.000
G1 X103.547 Y96.306 E0.00282 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.326 Y96.033 E-0.09277 ; wipe and retract
;WIPE_END
G1 E-2.30723 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X106.377 Y98.127 ; move to first infill point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.513302
G1 F2400.000
G1 X106.004 Y98.139 E0.01462 ; infill
;WIDTH:0.501419
G1 X105.939 Y98.142 E0.00247 ; infill
;WIDTH:0.462131
G1 X105.322 Y98.090 E0.02158 ; infill
G1 X105.257 Y98.025 F10800.000 ; move to first infill point
;WIDTH:0.209315
G1 F2400.000
G1 X105.500 Y98.106 E0.00353 ; infill
;WIDTH:0.219124
G1 X106.319 Y98.220 E0.01213 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.500 Y98.106 E-0.21841 ; wipe and retract
;WIPE_END
G1 E-2.18159 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X108.612 Y99.269 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.700 Y99.189 E0.00553 ; perimeter
G1 X108.804 Y99.155 E0.00506 ; perimeter
G1 X109.001 Y99.143 E0.00917 ; perimeter
G1 X109.097 Y99.179 E0.00474 ; perimeter
G1 X109.203 Y99.262 E0.00620 ; perimeter
G1 X109.247 Y99.323 E0.00350 ; perimeter
G1 X109.337 Y99.596 E0.01335 ; perimeter
G1 X109.352 Y99.709 E0.00525 ; perimeter
G1 X109.303 Y99.897 E0.00901 ; perimeter
G1 X109.229 Y100.031 E0.00711 ; perimeter
G1 X108.988 Y100.069 E0.01128 ; perimeter
G1 X108.831 Y100.017 E0.00766 ; perimeter
G1 X108.674 Y99.911 E0.00877 ; perimeter
G1 X108.521 Y99.688 E0.01253 ; perimeter
G1 X108.513 Y99.544 E0.00668 ; perimeter
G1 X108.592 Y99.326 E0.01074 ; perimeter
G1 X108.731 Y99.281 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.700 Y99.189 E-0.04613 ; wipe and retract
G1 X108.804 Y99.155 E-0.02884 ; wipe and retract
G1 X109.001 Y99.143 E-0.05226 ; wipe and retract
G1 X109.097 Y99.179 E-0.02701 ; wipe and retract
G1 X109.203 Y99.262 E-0.03535 ; wipe and retract
G1 X109.247 Y99.323 E-0.01992 ; wipe and retract
G1 X109.337 Y99.596 E-0.07606 ; wipe and retract
G1 X109.352 Y99.709 E-0.02992 ; wipe and retract
G1 X109.303 Y99.897 E-0.05136 ; wipe and retract
G1 X109.229 Y100.031 E-0.04049 ; wipe and retract
G1 X108.988 Y100.069 E-0.06427 ; wipe and retract
G1 X108.831 Y100.017 E-0.04363 ; wipe and retract
G1 X108.674 Y99.911 E-0.04998 ; wipe and retract
G1 X108.521 Y99.688 E-0.07136 ; wipe and retract
G1 X108.513 Y99.544 E-0.03803 ; wipe and retract
G1 X108.592 Y99.326 E-0.06118 ; wipe and retract
;WIPE_END
G1 E-1.66421 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X111.066 Y102.080 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.205 Y101.985 E0.00569 ; perimeter
G1 X111.237 Y102.255 E0.00920 ; perimeter
G1 X111.106 Y102.124 E0.00625 ; perimeter
G1 X111.706 Y102.110 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.843 Y102.270 E0.00975 ; perimeter
G1 X111.850 Y102.363 E0.00434 ; perimeter
G1 X111.944 Y102.531 E0.00893 ; perimeter
G1 X111.955 Y102.601 E0.00327 ; perimeter
G1 X111.895 Y102.853 E0.01199 ; perimeter
G1 X111.843 Y102.891 E0.00300 ; perimeter
G1 X111.686 Y102.944 E0.00767 ; perimeter
G1 X111.477 Y102.932 E0.00971 ; perimeter
G1 X111.286 Y102.869 E0.00931 ; perimeter
G1 X110.915 Y102.619 E0.02074 ; perimeter
G1 X110.721 Y102.419 E0.01290 ; perimeter
G1 X110.546 Y102.204 E0.01283 ; perimeter
G1 X110.388 Y101.853 E0.01784 ; perimeter
G1 X110.412 Y101.705 E0.00691 ; perimeter
G1 X110.497 Y101.591 E0.00660 ; perimeter
G1 X110.663 Y101.621 E0.00782 ; perimeter
G1 X110.799 Y101.556 E0.00700 ; perimeter
G1 X110.923 Y101.593 E0.00598 ; perimeter
G1 X111.095 Y101.476 E0.00968 ; perimeter
G1 X111.232 Y101.423 E0.00677 ; perimeter
G1 X111.453 Y101.428 E0.01023 ; perimeter
G1 X111.580 Y101.557 E0.00841 ; perimeter
G1 X111.674 Y101.823 E0.01307 ; perimeter
G1 X111.699 Y102.051 E0.01061 ; perimeter
G1 X111.605 Y102.295 F10800.000 ; move inwards before travel
G1 X111.610 Y102.699 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.161442
G1 F2400.000
G1 X111.543 Y102.291 E0.00407 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.610 Y102.699 E-0.10896 ; wipe and retract
;WIPE_END
G1 E-2.29104 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X114.083 Y102.697 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.160 Y102.485 E0.01041 ; perimeter
G1 X114.301 Y102.381 E0.00812 ; perimeter
G1 X114.435 Y102.383 E0.00620 ; perimeter
G1 X114.661 Y102.449 E0.01089 ; perimeter
G1 X114.914 Y102.607 E0.01382 ; perimeter
G1 X115.055 Y102.752 E0.00937 ; perimeter
G1 X115.150 Y102.953 E0.01033 ; perimeter
G1 X115.154 Y103.138 E0.00853 ; perimeter
G1 X115.130 Y103.226 E0.00424 ; perimeter
G1 X115.075 Y103.308 E0.00458 ; perimeter
G1 X114.914 Y103.397 E0.00852 ; perimeter
G1 X114.652 Y103.411 E0.01216 ; perimeter
G1 X114.501 Y103.382 E0.00714 ; perimeter
G1 X114.251 Y103.177 E0.01495 ; perimeter
G1 X114.179 Y103.038 E0.00727 ; perimeter
G1 X114.099 Y102.754 E0.01364 ; perimeter
G1 X114.290 Y102.608 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.160 Y102.485 E-0.07278 ; wipe and retract
G1 X114.301 Y102.381 E-0.04623 ; wipe and retract
G1 X114.435 Y102.383 E-0.03530 ; wipe and retract
G1 X114.661 Y102.449 E-0.06203 ; wipe and retract
G1 X114.914 Y102.607 E-0.07874 ; wipe and retract
G1 X115.055 Y102.752 E-0.05337 ; wipe and retract
G1 X115.150 Y102.953 E-0.05886 ; wipe and retract
G1 X115.154 Y103.138 E-0.04861 ; wipe and retract
G1 X115.130 Y103.226 E-0.02416 ; wipe and retract
G1 X115.075 Y103.308 E-0.02612 ; wipe and retract
G1 X114.914 Y103.397 E-0.04852 ; wipe and retract
G1 X114.652 Y103.411 E-0.06925 ; wipe and retract
G1 X114.501 Y103.382 E-0.04065 ; wipe and retract
G1 X114.251 Y103.177 E-0.08519 ; wipe and retract
G1 X114.179 Y103.038 E-0.04139 ; wipe and retract
G1 X114.099 Y102.754 E-0.07770 ; wipe and retract
;WIPE_END
G1 E-1.53110 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X115.406 Y105.185 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.452 Y105.167 E0.00229 ; perimeter
G1 X115.656 Y105.189 E0.00954 ; perimeter
G1 X115.782 Y105.285 E0.00735 ; perimeter
G1 X115.876 Y105.478 E0.00992 ; perimeter
G1 X115.904 Y106.044 E0.02628 ; perimeter
G1 X115.893 Y106.114 E0.00327 ; perimeter
G1 X115.818 Y106.267 E0.00791 ; perimeter
G1 X115.660 Y106.431 E0.01051 ; perimeter
G1 X115.518 Y106.480 E0.00697 ; perimeter
G1 X115.394 Y106.445 E0.00597 ; perimeter
G1 X115.269 Y106.361 E0.00697 ; perimeter
G1 X115.129 Y106.155 E0.01153 ; perimeter
G1 X115.108 Y105.933 E0.01034 ; perimeter
G1 X115.133 Y105.562 E0.01724 ; perimeter
G1 X115.165 Y105.438 E0.00592 ; perimeter
G1 X115.245 Y105.289 E0.00782 ; perimeter
G1 X115.360 Y105.222 E0.00617 ; perimeter
G1 X115.448 Y105.210 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.452 Y105.167 E-0.02827 ; wipe and retract
G1 X115.656 Y105.189 E-0.05433 ; wipe and retract
G1 X115.782 Y105.285 E-0.04186 ; wipe and retract
G1 X115.876 Y105.478 E-0.05651 ; wipe and retract
G1 X115.904 Y106.044 E-0.14973 ; wipe and retract
G1 X115.893 Y106.114 E-0.01865 ; wipe and retract
G1 X115.818 Y106.267 E-0.04508 ; wipe and retract
G1 X115.660 Y106.431 E-0.05990 ; wipe and retract
G1 X115.518 Y106.480 E-0.03973 ; wipe and retract
G1 X115.394 Y106.445 E-0.03398 ; wipe and retract
G1 X115.269 Y106.361 E-0.03974 ; wipe and retract
G1 X115.129 Y106.155 E-0.06569 ; wipe and retract
G1 X115.108 Y105.933 E-0.05889 ; wipe and retract
G1 X115.133 Y105.562 E-0.09821 ; wipe and retract
G1 X115.165 Y105.438 E-0.03372 ; wipe and retract
G1 X115.245 Y105.289 E-0.04454 ; wipe and retract
G1 X115.360 Y105.222 E-0.03514 ; wipe and retract
;WIPE_END
G1 E-1.49604 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X115.512 Y110.600 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.734 Y110.667 E0.01073 ; perimeter
G1 X115.777 Y110.706 E0.00271 ; perimeter
G1 X115.882 Y110.970 E0.01314 ; perimeter
G1 X115.883 Y111.109 E0.00646 ; perimeter
G1 X115.825 Y111.306 E0.00946 ; perimeter
G1 X115.733 Y111.422 E0.00687 ; perimeter
G1 X115.561 Y111.498 E0.00871 ; perimeter
G1 X115.428 Y111.491 E0.00621 ; perimeter
G1 X115.312 Y111.436 E0.00594 ; perimeter
G1 X115.224 Y111.331 E0.00633 ; perimeter
G1 X115.155 Y111.096 E0.01137 ; perimeter
G1 X115.173 Y110.891 E0.00954 ; perimeter
G1 X115.231 Y110.741 E0.00741 ; perimeter
G1 X115.277 Y110.688 E0.00328 ; perimeter
G1 X115.363 Y110.635 E0.00466 ; perimeter
G1 X115.452 Y110.608 E0.00434 ; perimeter
G1 X115.612 Y110.809 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.734 Y110.667 E-0.07585 ; wipe and retract
G1 X115.777 Y110.706 E-0.01546 ; wipe and retract
G1 X115.882 Y110.970 E-0.07488 ; wipe and retract
G1 X115.883 Y111.109 E-0.03681 ; wipe and retract
G1 X115.825 Y111.306 E-0.05392 ; wipe and retract
G1 X115.733 Y111.422 E-0.03914 ; wipe and retract
G1 X115.561 Y111.498 E-0.04960 ; wipe and retract
G1 X115.428 Y111.491 E-0.03539 ; wipe and retract
G1 X115.312 Y111.436 E-0.03385 ; wipe and retract
G1 X115.224 Y111.331 E-0.03606 ; wipe and retract
G1 X115.155 Y111.096 E-0.06475 ; wipe and retract
G1 X115.173 Y110.891 E-0.05435 ; wipe and retract
G1 X115.231 Y110.741 E-0.04224 ; wipe and retract
G1 X115.277 Y110.688 E-0.01866 ; wipe and retract
G1 X115.363 Y110.635 E-0.02657 ; wipe and retract
G1 X115.452 Y110.608 E-0.02470 ; wipe and retract
;WIPE_END
G1 E-1.71778 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 X115.423 Y114.817 ; move to first perimeter point
G1 Z10.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.512 Y114.891 E0.00541 ; perimeter
G1 X115.560 Y114.962 E0.00395 ; perimeter
G1 X115.598 Y115.087 E0.00604 ; perimeter
G1 X115.603 Y115.218 E0.00611 ; perimeter
G1 X115.569 Y115.355 E0.00651 ; perimeter
G1 X115.535 Y115.417 E0.00326 ; perimeter
G1 X115.267 Y115.671 E0.01712 ; perimeter
G1 X114.974 Y115.857 E0.01612 ; perimeter
G1 X114.668 Y115.937 E0.01463 ; perimeter
G1 X114.572 Y115.932 E0.00443 ; perimeter
G1 X114.121 Y116.017 E0.02128 ; perimeter
G1 X113.593 Y116.083 E0.02462 ; perimeter
G1 X113.509 Y116.084 E0.00392 ; perimeter
G1 X113.223 Y116.011 E0.01368 ; perimeter
G1 X112.960 Y115.904 E0.01315 ; perimeter
G1 X112.517 Y115.991 E0.02091 ; perimeter
G1 X112.458 Y116.035 E0.00339 ; perimeter
G1 X112.126 Y116.134 E0.01605 ; perimeter
G1 X111.875 Y116.118 E0.01166 ; perimeter
G1 X111.739 Y116.046 E0.00711 ; perimeter
G1 X111.649 Y115.896 E0.00810 ; perimeter
G1 X111.625 Y115.783 E0.00535 ; perimeter
G1 X111.641 Y115.655 E0.00600 ; perimeter
G1 X111.723 Y115.508 E0.00780 ; perimeter
G1 X111.800 Y115.450 E0.00444 ; perimeter
G1 X111.927 Y115.405 E0.00628 ; perimeter
G1 X112.082 Y115.394 E0.00720 ; perimeter
G1 X112.356 Y115.427 E0.01276 ; perimeter
G1 X112.472 Y115.491 E0.00613 ; perimeter
G1 X112.841 Y115.487 E0.01709 ; perimeter
G1 X113.070 Y115.424 E0.01104 ; perimeter
G1 X113.387 Y115.298 E0.01581 ; perimeter
G1 X113.779 Y115.236 E0.01835 ; perimeter
G1 X114.017 Y115.249 E0.01104 ; perimeter
G1 X114.413 Y115.144 E0.01900 ; perimeter
G1 X114.751 Y114.972 E0.01757 ; perimeter
G1 X115.011 Y114.806 E0.01428 ; perimeter
G1 X115.103 Y114.779 E0.00444 ; perimeter
G1 X115.313 Y114.772 E0.00974 ; perimeter
G1 X115.367 Y114.794 E0.00269 ; perimeter
G1 X115.425 Y114.933 F10800.000 ; move inwards before travel
G1 X115.282 Y115.020 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.252468
G1 F2400.000
G1 X115.214 Y115.163 E0.00276 ; infill
;WIDTH:0.362165
G1 X115.000 Y115.328 E0.00718 ; infill
G1 X114.795 Y115.446 E0.00627 ; infill
G1 X114.625 Y115.511 E0.00482 ; infill
G1 X114.079 Y115.632 E0.01485 ; infill
;WIDTH:0.333011
G1 X113.137 Y115.716 E0.02282 ; infill
;LAYER_CHANGE
;Z:10.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;10.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.079 Y115.632 E-0.24965 ; wipe and retract
;WIPE_END
G1 E-2.15035 F2400.000 ; retract
G1 Z10.675 F10800.000 ; lift Z
G1 Z10.800 ; move to next layer (53)
;AFTER_LAYER_CHANGE
;10.8
G1 Z10.875 ; lift Z
G1 X106.408 Y112.675 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X106.149 Y112.851 E0.01058 ; perimeter
G1 X106.133 Y112.775 E0.00262 ; perimeter
G1 X106.219 Y112.790 E0.00294 ; perimeter
G1 X106.356 Y112.706 E0.00546 ; perimeter
G1 X105.640 Y112.330 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.917 Y112.249 E0.01336 ; perimeter
G1 X106.122 Y112.284 E0.00965 ; perimeter
G1 X106.281 Y112.188 E0.00861 ; perimeter
G1 X106.386 Y112.191 E0.00486 ; perimeter
G1 X106.783 Y111.988 E0.02065 ; perimeter
G1 X106.837 Y111.982 E0.00253 ; perimeter
G1 X107.112 Y111.864 E0.01385 ; perimeter
G1 X107.181 Y111.890 E0.00343 ; perimeter
G1 X107.252 Y111.972 E0.00503 ; perimeter
G1 X107.281 Y112.097 E0.00592 ; perimeter
G1 X107.254 Y112.322 E0.01051 ; perimeter
G1 X107.129 Y112.590 E0.01370 ; perimeter
G1 X107.036 Y112.718 E0.00732 ; perimeter
G1 X106.945 Y112.766 E0.00474 ; perimeter
G1 X106.827 Y112.939 E0.00970 ; perimeter
G1 X106.683 Y113.080 E0.00934 ; perimeter
G1 X106.144 Y113.406 E0.02919 ; perimeter
G1 X105.699 Y113.604 E0.02255 ; perimeter
G1 X105.611 Y113.603 E0.00410 ; perimeter
G1 X105.558 Y113.507 E0.00509 ; perimeter
G1 X105.658 Y112.870 E0.02986 ; perimeter
G1 X105.498 Y112.324 E0.02636 ; perimeter
G1 X105.456 Y112.237 E0.00449 ; perimeter
G1 X105.587 Y112.303 E0.00678 ; perimeter
G1 X105.826 Y112.551 F10800.000 ; move inwards before travel
G1 X106.717 Y112.465 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.32735
G1 F2400.000
G1 X107.024 Y112.211 E0.00943 ; infill
G1 X106.717 Y112.465 F10800.000 ; move to first infill point
;WIDTH:0.307768
G1 F2400.000
G1 X106.707 Y112.560 E0.00211 ; infill
;WIDTH:0.259799
G1 X106.698 Y112.655 E0.00173 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.707 Y112.560 E-0.02524 ; wipe and retract
;WIPE_END
G1 E-2.37476 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X113.054 Y115.674 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.832 Y115.838 E0.01279 ; perimeter
G1 X112.549 Y115.886 E0.01328 ; perimeter
G1 X112.315 Y116.062 E0.01358 ; perimeter
G1 X112.068 Y116.135 E0.01193 ; perimeter
G1 X111.913 Y116.130 E0.00716 ; perimeter
G1 X111.792 Y116.100 E0.00581 ; perimeter
G1 X111.719 Y116.058 E0.00388 ; perimeter
G1 X111.620 Y115.904 E0.00848 ; perimeter
G1 X111.595 Y115.778 E0.00596 ; perimeter
G1 X111.611 Y115.652 E0.00589 ; perimeter
G1 X111.685 Y115.516 E0.00718 ; perimeter
G1 X111.786 Y115.442 E0.00578 ; perimeter
G1 X111.911 Y115.404 E0.00608 ; perimeter
G1 X112.085 Y115.399 E0.00804 ; perimeter
G1 X112.281 Y115.434 E0.00921 ; perimeter
G1 X112.516 Y115.564 E0.01245 ; perimeter
G1 X112.638 Y115.563 E0.00562 ; perimeter
G1 X112.934 Y115.690 E0.01493 ; perimeter
G1 X113.256 Y115.459 E0.01835 ; perimeter
G1 X113.520 Y115.306 E0.01413 ; perimeter
G1 X113.718 Y115.249 E0.00956 ; perimeter
G1 X113.914 Y115.218 E0.00919 ; perimeter
G1 X114.052 Y115.226 E0.00639 ; perimeter
G1 X114.468 Y115.108 E0.02001 ; perimeter
G1 X114.782 Y114.946 E0.01635 ; perimeter
G1 X115.019 Y114.792 E0.01309 ; perimeter
G1 X115.103 Y114.767 E0.00406 ; perimeter
G1 X115.332 Y114.762 E0.01060 ; perimeter
G1 X115.437 Y114.804 E0.00526 ; perimeter
G1 X115.517 Y114.871 E0.00483 ; perimeter
G1 X115.569 Y114.949 E0.00432 ; perimeter
G1 X115.607 Y115.080 E0.00631 ; perimeter
G1 X115.611 Y115.215 E0.00626 ; perimeter
G1 X115.577 Y115.346 E0.00629 ; perimeter
G1 X115.541 Y115.409 E0.00333 ; perimeter
G1 X115.279 Y115.658 E0.01677 ; perimeter
G1 X114.956 Y115.869 E0.01785 ; perimeter
G1 X114.606 Y115.966 E0.01683 ; perimeter
G1 X113.853 Y116.068 E0.03521 ; perimeter
G1 X113.703 Y116.071 E0.00696 ; perimeter
G1 X113.470 Y116.001 E0.01125 ; perimeter
G1 X113.220 Y115.884 E0.01278 ; perimeter
G1 X113.091 Y115.721 E0.00965 ; perimeter
G1 X112.870 Y115.468 F10800.000 ; move inwards before travel
G1 X113.421 Y115.712 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.368624
G1 F2400.000
G1 X114.123 Y115.624 E0.01916 ; infill
;WIDTH:0.395437
G1 X114.321 Y115.583 E0.00593 ; infill
;WIDTH:0.430105
G1 X114.646 Y115.505 E0.01076 ; infill
G1 X114.770 Y115.456 E0.00428 ; infill
G1 X115.008 Y115.317 E0.00888 ; infill
;WIDTH:0.33705
G1 X115.207 Y115.168 E0.00608 ; infill
G1 X115.335 Y115.033 E0.00455 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.207 Y115.168 E-0.04910 ; wipe and retract
G1 X115.008 Y115.317 E-0.06556 ; wipe and retract
;WIPE_END
G1 E-2.28534 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X115.560 Y111.571 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.407 Y111.557 E0.00716 ; perimeter
G1 X115.275 Y111.485 E0.00697 ; perimeter
G1 X115.202 Y111.371 E0.00627 ; perimeter
G1 X115.154 Y111.186 E0.00886 ; perimeter
G1 X115.155 Y111.122 E0.00293 ; perimeter
G1 X115.198 Y111.033 E0.00458 ; perimeter
G1 X115.201 Y110.893 E0.00648 ; perimeter
G1 X115.230 Y110.817 E0.00378 ; perimeter
G1 X115.289 Y110.747 E0.00425 ; perimeter
G1 X115.405 Y110.690 E0.00598 ; perimeter
G1 X115.517 Y110.675 E0.00523 ; perimeter
G1 X115.727 Y110.736 E0.01013 ; perimeter
G1 X115.775 Y110.777 E0.00291 ; perimeter
G1 X115.882 Y111.042 E0.01325 ; perimeter
G1 X115.883 Y111.150 E0.00502 ; perimeter
G1 X115.828 Y111.378 E0.01085 ; perimeter
G1 X115.668 Y111.536 E0.01041 ; perimeter
G1 X115.618 Y111.552 E0.00244 ; perimeter
G1 X115.464 Y111.450 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.407 Y111.557 E-0.05569 ; wipe and retract
G1 X115.275 Y111.485 E-0.03968 ; wipe and retract
G1 X115.202 Y111.371 E-0.03573 ; wipe and retract
G1 X115.154 Y111.186 E-0.05046 ; wipe and retract
G1 X115.155 Y111.122 E-0.01670 ; wipe and retract
G1 X115.198 Y111.033 E-0.02609 ; wipe and retract
G1 X115.201 Y110.893 E-0.03694 ; wipe and retract
G1 X115.230 Y110.817 E-0.02152 ; wipe and retract
G1 X115.289 Y110.747 E-0.02420 ; wipe and retract
G1 X115.405 Y110.690 E-0.03409 ; wipe and retract
G1 X115.517 Y110.675 E-0.02980 ; wipe and retract
G1 X115.727 Y110.736 E-0.05770 ; wipe and retract
G1 X115.775 Y110.777 E-0.01658 ; wipe and retract
G1 X115.882 Y111.042 E-0.07548 ; wipe and retract
G1 X115.883 Y111.150 E-0.02859 ; wipe and retract
G1 X115.828 Y111.378 E-0.06183 ; wipe and retract
G1 X115.668 Y111.536 E-0.05933 ; wipe and retract
G1 X115.618 Y111.552 E-0.01390 ; wipe and retract
;WIPE_END
G1 E-1.71572 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X115.512 Y106.333 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.264 Y106.197 E0.01313 ; perimeter
G1 X115.131 Y106.016 E0.01038 ; perimeter
G1 X115.112 Y105.831 E0.00861 ; perimeter
G1 X115.132 Y105.559 E0.01264 ; perimeter
G1 X115.168 Y105.445 E0.00551 ; perimeter
G1 X115.248 Y105.369 E0.00511 ; perimeter
G1 X115.277 Y105.303 E0.00334 ; perimeter
G1 X115.333 Y105.268 E0.00307 ; perimeter
G1 X115.401 Y105.276 E0.00317 ; perimeter
G1 X115.508 Y105.241 E0.00519 ; perimeter
G1 X115.654 Y105.265 E0.00687 ; perimeter
G1 X115.820 Y105.396 E0.00981 ; perimeter
G1 X115.873 Y105.488 E0.00490 ; perimeter
G1 X115.897 Y105.987 E0.02315 ; perimeter
G1 X115.805 Y106.174 E0.00963 ; perimeter
G1 X115.567 Y106.309 E0.01269 ; perimeter
G1 X115.393 Y106.076 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.264 Y106.197 E-0.08543 ; wipe and retract
G1 X115.131 Y106.016 E-0.05913 ; wipe and retract
G1 X115.112 Y105.831 E-0.04907 ; wipe and retract
G1 X115.132 Y105.559 E-0.07203 ; wipe and retract
G1 X115.168 Y105.445 E-0.03138 ; wipe and retract
G1 X115.248 Y105.369 E-0.02913 ; wipe and retract
G1 X115.277 Y105.303 E-0.01901 ; wipe and retract
G1 X115.333 Y105.268 E-0.01749 ; wipe and retract
G1 X115.401 Y105.276 E-0.01808 ; wipe and retract
G1 X115.508 Y105.241 E-0.02957 ; wipe and retract
G1 X115.654 Y105.265 E-0.03916 ; wipe and retract
G1 X115.820 Y105.396 E-0.05586 ; wipe and retract
G1 X115.873 Y105.488 E-0.02789 ; wipe and retract
G1 X115.897 Y105.987 E-0.13187 ; wipe and retract
G1 X115.805 Y106.174 E-0.05488 ; wipe and retract
G1 X115.567 Y106.309 E-0.07232 ; wipe and retract
;WIPE_END
G1 E-1.60769 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X114.452 Y103.370 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.317 Y103.265 E0.00793 ; perimeter
G1 X114.189 Y103.065 E0.01102 ; perimeter
G1 X114.153 Y102.753 E0.01455 ; perimeter
G1 X114.209 Y102.615 E0.00688 ; perimeter
G1 X114.360 Y102.491 E0.00904 ; perimeter
G1 X114.455 Y102.466 E0.00455 ; perimeter
G1 X114.719 Y102.523 E0.01252 ; perimeter
G1 X114.974 Y102.695 E0.01424 ; perimeter
G1 X115.100 Y102.949 E0.01313 ; perimeter
G1 X115.100 Y103.109 E0.00741 ; perimeter
G1 X115.074 Y103.203 E0.00452 ; perimeter
G1 X115.030 Y103.268 E0.00362 ; perimeter
G1 X114.855 Y103.378 E0.00956 ; perimeter
G1 X114.642 Y103.405 E0.00994 ; perimeter
G1 X114.511 Y103.381 E0.00617 ; perimeter
G1 X114.439 Y103.200 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.317 Y103.265 E-0.05969 ; wipe and retract
G1 X114.189 Y103.065 E-0.06281 ; wipe and retract
G1 X114.153 Y102.753 E-0.08291 ; wipe and retract
G1 X114.209 Y102.615 E-0.03918 ; wipe and retract
G1 X114.360 Y102.491 E-0.05148 ; wipe and retract
G1 X114.455 Y102.466 E-0.02594 ; wipe and retract
G1 X114.719 Y102.523 E-0.07135 ; wipe and retract
G1 X114.974 Y102.695 E-0.08113 ; wipe and retract
G1 X115.100 Y102.949 E-0.07482 ; wipe and retract
G1 X115.100 Y103.109 E-0.04219 ; wipe and retract
G1 X115.074 Y103.203 E-0.02576 ; wipe and retract
G1 X115.030 Y103.268 E-0.02061 ; wipe and retract
G1 X114.855 Y103.378 E-0.05448 ; wipe and retract
G1 X114.642 Y103.405 E-0.05665 ; wipe and retract
G1 X114.511 Y103.381 E-0.03518 ; wipe and retract
;WIPE_END
G1 E-1.61583 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X111.155 Y102.184 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.042 Y102.094 E0.00488 ; perimeter
G1 X111.105 Y102.072 E0.00225 ; perimeter
G1 X111.148 Y102.125 E0.00231 ; perimeter
G1 X111.280 Y101.603 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.346 Y101.604 E0.00307 ; perimeter
G1 X111.612 Y101.931 E0.01952 ; perimeter
G1 X111.628 Y102.079 E0.00690 ; perimeter
G1 X111.821 Y102.247 E0.01183 ; perimeter
G1 X112.008 Y102.463 E0.01320 ; perimeter
G1 X112.066 Y102.567 E0.00553 ; perimeter
G1 X112.107 Y102.804 E0.01113 ; perimeter
G1 X112.075 Y102.952 E0.00705 ; perimeter
G1 X112.046 Y102.988 E0.00214 ; perimeter
G1 X111.880 Y103.052 E0.00824 ; perimeter
G1 X111.621 Y103.046 E0.01201 ; perimeter
G1 X111.448 Y102.985 E0.00851 ; perimeter
G1 X111.196 Y102.835 E0.01356 ; perimeter
G1 X110.693 Y102.431 E0.02989 ; perimeter
G1 X110.352 Y102.068 E0.02309 ; perimeter
G1 X110.157 Y101.676 E0.02028 ; perimeter
G1 X110.182 Y101.527 E0.00699 ; perimeter
G1 X110.124 Y101.331 E0.00949 ; perimeter
G1 X111.013 Y101.584 E0.04281 ; perimeter
G1 X111.118 Y101.536 E0.00537 ; perimeter
G1 X111.225 Y101.580 E0.00534 ; perimeter
G1 X111.311 Y101.661 F10800.000 ; move inwards before travel
G1 X111.851 Y102.810 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.353086
G1 F2400.000
G1 X111.601 Y102.616 E0.00817 ; infill
G1 X111.435 Y102.231 E0.01081 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.601 Y102.616 E-0.11061 ; wipe and retract
G1 X111.851 Y102.810 E-0.08358 ; wipe and retract
;WIPE_END
G1 E-2.20581 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X108.656 Y99.197 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.989 Y99.098 E0.01609 ; perimeter
G1 X109.200 Y99.213 E0.01111 ; perimeter
G1 X109.288 Y99.335 E0.00698 ; perimeter
G1 X109.387 Y99.599 E0.01309 ; perimeter
G1 X109.423 Y99.864 E0.01239 ; perimeter
G1 X109.381 Y99.965 E0.00505 ; perimeter
G1 X109.418 Y100.277 E0.01457 ; perimeter
G1 X109.313 Y100.295 E0.00492 ; perimeter
G1 X109.178 Y100.229 E0.00697 ; perimeter
G1 X109.065 Y100.113 E0.00748 ; perimeter
G1 X108.846 Y100.037 E0.01077 ; perimeter
G1 X108.712 Y99.926 E0.00807 ; perimeter
G1 X108.544 Y99.677 E0.01390 ; perimeter
G1 X108.525 Y99.517 E0.00746 ; perimeter
G1 X108.613 Y99.240 E0.01350 ; perimeter
G1 X108.974 Y99.335 F10800.000 ; move inwards before travel
G1 X108.938 Y99.543 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.363974
G1 F2400.000
G1 X108.937 Y99.533 E0.00026 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.938 Y99.543 E-0.00258 ; wipe and retract
;WIPE_END
G1 E-2.39742 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X105.268 Y98.073 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.262 Y98.023 E0.00231 ; perimeter
G1 X105.405 Y97.962 E0.00719 ; perimeter
G1 X105.696 Y97.765 E0.01626 ; perimeter
G1 X105.847 Y97.732 E0.00718 ; perimeter
G1 X106.040 Y97.628 E0.01018 ; perimeter
G1 X106.159 Y97.632 E0.00551 ; perimeter
G1 X106.407 Y97.567 E0.01187 ; perimeter
G1 X106.677 Y97.621 E0.01275 ; perimeter
G1 X106.828 Y97.749 E0.00914 ; perimeter
G1 X106.867 Y97.853 E0.00515 ; perimeter
G1 X106.846 Y97.976 E0.00577 ; perimeter
G1 X106.687 Y98.239 E0.01424 ; perimeter
G1 X106.369 Y98.453 E0.01775 ; perimeter
G1 X105.980 Y98.503 E0.01817 ; perimeter
G1 X105.583 Y98.368 E0.01943 ; perimeter
G1 X105.369 Y98.224 E0.01194 ; perimeter
G1 X105.302 Y98.122 E0.00565 ; perimeter
G1 X105.300 Y98.034 F10800.000 ; move inwards before travel
G1 X106.567 Y97.843 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.331514
G1 F2400.000
G1 X106.401 Y97.967 E0.00495 ; infill
G1 X106.217 Y98.050 E0.00484 ; infill
G1 X106.022 Y98.094 E0.00482 ; infill
G1 X105.630 Y98.101 E0.00940 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.022 Y98.094 E-0.10332 ; wipe and retract
G1 X106.217 Y98.050 E-0.05297 ; wipe and retract
G1 X106.401 Y97.967 E-0.05320 ; wipe and retract
G1 X106.567 Y97.843 E-0.05447 ; wipe and retract
;WIPE_END
G1 E-2.13604 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X103.999 Y96.449 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.864 Y96.284 E0.00724 ; perimeter
G1 X103.774 Y96.237 E0.00343 ; perimeter
G1 X104.007 Y96.296 E0.00814 ; perimeter
G1 X104.002 Y96.389 E0.00316 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.864 Y96.284 E-0.04593 ; wipe and retract
G1 X103.774 Y96.237 E-0.02673 ; wipe and retract
G1 X104.007 Y96.296 E-0.06344 ; wipe and retract
G1 X104.002 Y96.389 E-0.02467 ; wipe and retract
;WIPE_END
G1 E-2.23923 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X101.111 Y96.355 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.988 Y96.694 E0.01222 ; perimeter
G1 X100.893 Y96.575 E0.00517 ; perimeter
G1 X100.723 Y96.510 E0.00616 ; perimeter
G1 X100.692 Y96.478 E0.00151 ; perimeter
G1 X100.807 Y96.462 E0.00395 ; perimeter
G1 X101.054 Y96.375 E0.00887 ; perimeter
G1 X101.539 Y96.595 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.424 Y96.940 E0.01686 ; perimeter
G1 X101.320 Y97.044 E0.00682 ; perimeter
G1 X101.238 Y97.260 E0.01070 ; perimeter
G1 X101.152 Y97.351 E0.00577 ; perimeter
G1 X101.121 Y97.357 E0.00146 ; perimeter
G1 X100.953 Y97.312 E0.00805 ; perimeter
G1 X100.737 Y97.152 E0.01245 ; perimeter
G1 X100.598 Y96.978 E0.01033 ; perimeter
G1 X100.451 Y96.921 E0.00730 ; perimeter
G1 X100.387 Y96.856 E0.00423 ; perimeter
G1 X100.056 Y96.683 E0.01732 ; perimeter
G1 X99.862 Y96.506 E0.01213 ; perimeter
G1 X99.816 Y96.360 E0.00711 ; perimeter
G1 X99.858 Y96.214 E0.00701 ; perimeter
G1 X99.892 Y96.178 E0.00230 ; perimeter
G1 X100.192 Y96.058 E0.01499 ; perimeter
G1 X100.694 Y95.991 E0.02344 ; perimeter
G1 X101.311 Y95.773 E0.03031 ; perimeter
G1 X101.388 Y95.717 E0.00443 ; perimeter
G1 X101.760 Y95.559 E0.01874 ; perimeter
G1 X102.149 Y95.487 E0.01829 ; perimeter
G1 X102.581 Y95.520 E0.02010 ; perimeter
G1 X103.647 Y95.745 E0.05046 ; perimeter
G1 X103.854 Y95.759 E0.00962 ; perimeter
G1 X104.247 Y95.860 E0.01878 ; perimeter
G1 X104.394 Y95.977 E0.00871 ; perimeter
G1 X104.494 Y96.205 E0.01152 ; perimeter
G1 X104.472 Y96.632 E0.01980 ; perimeter
G1 X104.371 Y97.004 E0.01786 ; perimeter
G1 X104.218 Y97.177 E0.01071 ; perimeter
G1 X104.004 Y97.169 E0.00991 ; perimeter
G1 X103.856 Y97.037 E0.00920 ; perimeter
G1 X103.553 Y96.666 E0.02218 ; perimeter
G1 X103.351 Y96.561 E0.01057 ; perimeter
G1 X102.991 Y96.325 E0.01993 ; perimeter
G1 X102.522 Y96.158 E0.02305 ; perimeter
G1 X102.008 Y96.250 E0.02418 ; perimeter
G1 X101.587 Y96.559 E0.02419 ; perimeter
G1 X101.176 Y96.567 F10800.000 ; move inwards before travel
G1 X101.433 Y96.153 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.287313
G1 F2400.000
G1 X101.866 Y95.909 E0.01011 ; infill
G1 X102.155 Y95.855 E0.00598 ; infill
G1 X102.342 Y95.845 E0.00381 ; infill
;WIDTH:0.194347
G1 X102.568 Y95.840 E0.00284 ; infill
;WIDTH:0.23116
G1 X102.852 Y95.920 E0.00463 ; infill
;WIDTH:0.277303
G1 X103.164 Y96.009 E0.00631 ; infill
;WIDTH:0.323069
G1 X103.353 Y96.088 E0.00479 ; infill
;WIDTH:0.368834
G1 X103.543 Y96.167 E0.00557 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.353 Y96.088 E-0.05421 ; wipe and retract
;WIPE_END
G1 E-2.34579 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X100.419 Y96.575 ; move to first infill point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.130047
G1 F2400.000
G1 X100.134 Y96.341 E0.00267 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.419 Y96.575 E-0.09728 ; wipe and retract
;WIPE_END
G1 E-2.30272 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X101.025 Y101.720 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.053 Y101.816 E0.00338 ; perimeter
G1 X100.957 Y101.797 E0.00333 ; perimeter
G1 X100.984 Y101.764 E0.00145 ; perimeter
G1 X100.506 Y101.571 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.770 Y101.285 E0.01806 ; perimeter
G1 X100.919 Y101.056 E0.01267 ; perimeter
G1 X101.011 Y100.977 E0.00561 ; perimeter
G1 X101.331 Y101.280 E0.02041 ; perimeter
G1 X101.489 Y101.563 E0.01504 ; perimeter
G1 X101.555 Y101.845 E0.01341 ; perimeter
G1 X101.540 Y102.067 E0.01029 ; perimeter
G1 X101.484 Y102.169 E0.00536 ; perimeter
G1 X101.359 Y102.205 E0.00605 ; perimeter
G1 X101.188 Y102.319 E0.00951 ; perimeter
G1 X100.904 Y102.278 E0.01328 ; perimeter
G1 X100.777 Y102.284 E0.00589 ; perimeter
G1 X100.596 Y102.196 E0.00931 ; perimeter
G1 X100.535 Y102.142 E0.00378 ; perimeter
G1 X100.446 Y101.928 E0.01075 ; perimeter
G1 X100.482 Y101.624 E0.01418 ; perimeter
G1 X100.895 Y101.555 F10800.000 ; move inwards before travel
G1 X99.918 Y99.947 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.909 Y99.923 E0.00087 ; perimeter
G1 X99.989 Y99.918 E0.00273 ; perimeter
G1 X99.973 Y99.924 E0.00058 ; perimeter
G1 X100.504 Y100.226 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.958 Y100.452 E0.02741 ; perimeter
G1 X99.735 Y100.454 E0.01033 ; perimeter
G1 X99.633 Y100.404 E0.00526 ; perimeter
G1 X99.505 Y100.214 E0.01059 ; perimeter
G1 X99.401 Y99.949 E0.01319 ; perimeter
G1 X99.419 Y99.628 E0.01490 ; perimeter
G1 X99.504 Y99.526 E0.00613 ; perimeter
G1 X99.704 Y99.431 E0.01026 ; perimeter
G1 X100.079 Y99.428 E0.01740 ; perimeter
G1 X100.355 Y99.525 E0.01354 ; perimeter
G1 X100.451 Y99.617 E0.00616 ; perimeter
G1 X100.557 Y100.003 E0.01852 ; perimeter
G1 X100.518 Y100.168 E0.00786 ; perimeter
G1 X100.115 Y100.134 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.958 Y100.452 E-0.16590 ; wipe and retract
G1 X99.735 Y100.454 E-0.05886 ; wipe and retract
G1 X99.633 Y100.404 E-0.02997 ; wipe and retract
G1 X99.505 Y100.214 E-0.06035 ; wipe and retract
G1 X99.401 Y99.949 E-0.07516 ; wipe and retract
G1 X99.419 Y99.628 E-0.08490 ; wipe and retract
G1 X99.504 Y99.526 E-0.03490 ; wipe and retract
G1 X99.704 Y99.431 E-0.05846 ; wipe and retract
G1 X100.079 Y99.428 E-0.09913 ; wipe and retract
G1 X100.355 Y99.525 E-0.07714 ; wipe and retract
G1 X100.451 Y99.617 E-0.03509 ; wipe and retract
G1 X100.557 Y100.003 E-0.10550 ; wipe and retract
G1 X100.518 Y100.168 E-0.04477 ; wipe and retract
;WIPE_END
G1 E-1.46985 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X102.818 Y106.536 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.152 Y106.837 E0.01523 ; perimeter
G1 X103.720 Y107.202 E0.02285 ; perimeter
G1 X103.559 Y107.370 E0.00787 ; perimeter
G1 X103.234 Y107.978 E0.02332 ; perimeter
G1 X103.247 Y108.237 E0.00879 ; perimeter
G1 X102.981 Y107.861 E0.01558 ; perimeter
G1 X102.830 Y107.755 E0.00627 ; perimeter
G1 X102.797 Y107.708 E0.00193 ; perimeter
G1 X102.833 Y107.593 E0.00410 ; perimeter
G1 X102.988 Y107.377 E0.00897 ; perimeter
G1 X102.923 Y106.841 E0.01827 ; perimeter
G1 X102.838 Y106.592 E0.00890 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.152 Y106.837 E-0.10514 ; wipe and retract
G1 X103.720 Y107.202 E-0.17812 ; wipe and retract
G1 X103.559 Y107.370 E-0.06135 ; wipe and retract
G1 X103.234 Y107.978 E-0.18183 ; wipe and retract
G1 X103.247 Y108.237 E-0.06850 ; wipe and retract
G1 X102.981 Y107.861 E-0.12146 ; wipe and retract
G1 X102.830 Y107.755 E-0.04891 ; wipe and retract
G1 X102.797 Y107.708 E-0.01504 ; wipe and retract
G1 X102.833 Y107.593 E-0.03195 ; wipe and retract
G1 X102.988 Y107.377 E-0.06992 ; wipe and retract
G1 X102.923 Y106.841 E-0.14240 ; wipe and retract
G1 X102.838 Y106.592 E-0.06942 ; wipe and retract
;WIPE_END
G1 E-1.30597 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X103.482 Y109.097 ; move to first perimeter point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.736 Y109.390 E0.01311 ; perimeter
G1 X103.942 Y109.473 E0.00751 ; perimeter
G1 X103.380 Y109.426 E0.01908 ; perimeter
G1 X103.464 Y109.155 E0.00963 ; perimeter
G1 X104.514 Y109.689 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X104.966 Y109.626 E0.01544 ; perimeter
G1 X105.192 Y109.646 E0.00767 ; perimeter
G1 X105.034 Y109.887 E0.00975 ; perimeter
G1 X104.903 Y110.031 E0.00658 ; perimeter
G1 X104.856 Y109.909 E0.00441 ; perimeter
G1 X104.565 Y109.721 E0.01175 ; perimeter
G1 X104.463 Y110.229 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.113 Y110.004 E0.01927 ; perimeter
G1 X103.976 Y109.960 E0.00667 ; perimeter
G1 X103.073 Y109.891 E0.04195 ; perimeter
G1 X102.807 Y109.821 E0.01275 ; perimeter
G1 X102.676 Y109.725 E0.00750 ; perimeter
G1 X102.693 Y109.640 E0.00403 ; perimeter
G1 X102.899 Y109.349 E0.01651 ; perimeter
G1 X103.024 Y108.946 E0.01952 ; perimeter
G1 X102.942 Y108.640 E0.01467 ; perimeter
G1 X102.636 Y108.208 E0.02453 ; perimeter
G1 X102.483 Y108.101 E0.00868 ; perimeter
G1 X102.300 Y107.838 E0.01481 ; perimeter
G1 X102.285 Y107.701 E0.00639 ; perimeter
G1 X102.360 Y107.500 E0.00992 ; perimeter
G1 X102.376 Y107.404 E0.00454 ; perimeter
G1 X102.487 Y107.249 E0.00880 ; perimeter
G1 X102.450 Y106.949 E0.01398 ; perimeter
G1 X102.382 Y106.749 E0.00982 ; perimeter
G1 X102.318 Y106.673 E0.00459 ; perimeter
G1 X102.280 Y106.579 E0.00470 ; perimeter
G1 X102.220 Y106.268 E0.01466 ; perimeter
G1 X102.228 Y105.912 E0.01648 ; perimeter
G1 X102.111 Y105.642 E0.01369 ; perimeter
G1 X101.881 Y105.412 E0.01501 ; perimeter
G1 X101.630 Y105.238 E0.01419 ; perimeter
G1 X101.560 Y105.115 E0.00651 ; perimeter
G1 X101.514 Y104.887 E0.01079 ; perimeter
G1 X101.559 Y104.690 E0.00938 ; perimeter
G1 X101.665 Y104.582 E0.00700 ; perimeter
G1 X101.848 Y104.510 E0.00910 ; perimeter
G1 X102.064 Y104.535 E0.01008 ; perimeter
G1 X102.181 Y104.590 E0.00594 ; perimeter
G1 X102.288 Y104.718 E0.00775 ; perimeter
G1 X102.348 Y105.004 E0.01353 ; perimeter
G1 X102.302 Y105.554 E0.02558 ; perimeter
G1 X102.496 Y105.814 E0.01500 ; perimeter
G1 X102.825 Y105.957 E0.01664 ; perimeter
G1 X103.090 Y106.131 E0.01468 ; perimeter
G1 X103.446 Y106.453 E0.02225 ; perimeter
G1 X104.001 Y106.810 E0.03054 ; perimeter
G1 X104.308 Y106.982 E0.01633 ; perimeter
G1 X104.362 Y107.130 E0.00728 ; perimeter
G1 X104.404 Y107.185 E0.00319 ; perimeter
G1 X104.301 Y107.316 E0.00770 ; perimeter
G1 X104.248 Y107.348 E0.00287 ; perimeter
G1 X103.953 Y107.656 E0.01978 ; perimeter
G1 X103.724 Y108.084 E0.02249 ; perimeter
G1 X103.734 Y108.246 E0.00749 ; perimeter
G1 X103.681 Y108.591 E0.01619 ; perimeter
G1 X104.024 Y108.986 E0.02420 ; perimeter
G1 X104.549 Y109.197 E0.02622 ; perimeter
G1 X104.954 Y109.141 E0.01895 ; perimeter
G1 X105.197 Y109.163 E0.01131 ; perimeter
G1 X105.487 Y109.097 E0.01374 ; perimeter
G1 X105.748 Y109.102 E0.01209 ; perimeter
G1 X105.910 Y109.126 E0.00760 ; perimeter
G1 X106.056 Y109.203 E0.00764 ; perimeter
G1 X106.115 Y109.365 E0.00798 ; perimeter
G1 X106.051 Y109.540 E0.00863 ; perimeter
G1 X105.845 Y109.718 E0.01261 ; perimeter
G1 X105.612 Y109.885 E0.01328 ; perimeter
G1 X105.413 Y110.188 E0.01680 ; perimeter
G1 X105.298 Y110.309 E0.00773 ; perimeter
G1 X104.998 Y110.789 E0.02624 ; perimeter
G1 X104.858 Y110.969 E0.01056 ; perimeter
G1 X104.728 Y110.961 E0.00604 ; perimeter
G1 X104.660 Y110.827 E0.00696 ; perimeter
G1 X104.635 Y110.679 E0.00697 ; perimeter
G1 X104.484 Y110.285 E0.01952 ; perimeter
G1 X104.571 Y109.844 F10800.000 ; move inwards before travel
G1 X105.359 Y109.396 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.144677
G1 F2400.000
G1 X105.618 Y109.391 E0.00219 ; infill
;WIDTH:0.174969
G1 X105.656 Y109.407 E0.00044 ; infill
;WIDTH:0.205259
G1 X105.693 Y109.423 E0.00055 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.656 Y109.407 E-0.01068 ; wipe and retract
;WIPE_END
G1 E-2.38932 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 X103.308 Y108.844 ; move to first infill point
G1 Z10.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.138
G1 F2400.000
G1 X103.218 Y108.650 E0.00169 ; infill
G1 X103.089 Y107.688 F10800.000 ; move to first infill point
;WIDTH:0.136101
G1 F2400.000
G1 X103.234 Y107.456 E0.00212 ; infill
G1 X103.334 Y107.196 E0.00216 ; infill
;LAYER_CHANGE
;Z:11
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;11
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.234 Y107.456 E-0.07347 ; wipe and retract
G1 X103.089 Y107.688 E-0.07222 ; wipe and retract
;WIPE_END
G1 E-2.25431 F2400.000 ; retract
G1 Z10.875 F10800.000 ; lift Z
G1 Z11.000 ; move to next layer (54)
;AFTER_LAYER_CHANGE
;11
G1 Z11.075 ; lift Z
G1 X105.972 Y112.476 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.175 Y112.395 E0.01014 ; perimeter
G1 X106.279 Y112.261 E0.00786 ; perimeter
G1 X106.894 Y111.845 E0.03439 ; perimeter
G1 X107.002 Y111.700 E0.00838 ; perimeter
G1 X107.295 Y111.594 E0.01446 ; perimeter
G1 X107.325 Y111.540 E0.00286 ; perimeter
G1 X107.443 Y111.764 E0.01175 ; perimeter
G1 X107.478 Y111.957 E0.00908 ; perimeter
G1 X107.442 Y112.177 E0.01033 ; perimeter
G1 X107.345 Y112.373 E0.01012 ; perimeter
G1 X107.118 Y112.666 E0.01717 ; perimeter
G1 X106.954 Y112.755 E0.00865 ; perimeter
G1 X106.821 Y112.910 E0.00946 ; perimeter
G1 X106.456 Y113.117 E0.01946 ; perimeter
G1 X106.297 Y113.146 E0.00748 ; perimeter
G1 X106.134 Y113.211 E0.00811 ; perimeter
G1 X106.070 Y113.190 E0.00311 ; perimeter
G1 X105.940 Y112.999 E0.01068 ; perimeter
G1 X105.968 Y112.827 E0.00810 ; perimeter
G1 X105.932 Y112.626 E0.00946 ; perimeter
G1 X105.956 Y112.534 E0.00440 ; perimeter
G1 X106.182 Y112.535 F10800.000 ; move inwards before travel
G1 X107.226 Y112.006 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.319863
G1 F2400.000
G1 X106.854 Y112.355 E0.01173 ; infill
G1 X106.683 Y112.464 E0.00468 ; infill
G1 X106.567 Y112.568 E0.00360 ; infill
G1 X106.295 Y112.901 E0.00989 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.567 Y112.568 E-0.11339 ; wipe and retract
G1 X106.683 Y112.464 E-0.04127 ; wipe and retract
G1 X106.854 Y112.355 E-0.05360 ; wipe and retract
G1 X107.226 Y112.006 E-0.13445 ; wipe and retract
;WIPE_END
G1 E-2.05729 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X111.587 Y115.624 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.669 Y115.497 E0.00701 ; perimeter
G1 X111.759 Y115.440 E0.00492 ; perimeter
G1 X111.946 Y115.400 E0.00886 ; perimeter
G1 X112.046 Y115.401 E0.00465 ; perimeter
G1 X112.213 Y115.442 E0.00794 ; perimeter
G1 X112.371 Y115.526 E0.00831 ; perimeter
G1 X112.454 Y115.649 E0.00685 ; perimeter
G1 X112.560 Y115.694 E0.00536 ; perimeter
G1 X112.573 Y115.744 E0.00238 ; perimeter
G1 X112.437 Y115.842 E0.00780 ; perimeter
G1 X112.411 Y115.928 E0.00417 ; perimeter
G1 X112.233 Y116.075 E0.01068 ; perimeter
G1 X112.046 Y116.133 E0.00903 ; perimeter
G1 X111.902 Y116.132 E0.00670 ; perimeter
G1 X111.764 Y116.101 E0.00656 ; perimeter
G1 X111.692 Y116.062 E0.00378 ; perimeter
G1 X111.613 Y115.969 E0.00562 ; perimeter
G1 X111.564 Y115.785 E0.00881 ; perimeter
G1 X111.577 Y115.683 E0.00478 ; perimeter
G1 X111.737 Y115.599 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.669 Y115.497 E-0.05480 ; wipe and retract
G1 X111.759 Y115.440 E-0.02803 ; wipe and retract
G1 X111.946 Y115.400 E-0.05046 ; wipe and retract
G1 X112.046 Y115.401 E-0.02651 ; wipe and retract
G1 X112.213 Y115.442 E-0.04526 ; wipe and retract
G1 X112.371 Y115.526 E-0.04734 ; wipe and retract
G1 X112.454 Y115.649 E-0.03905 ; wipe and retract
G1 X112.560 Y115.694 E-0.03052 ; wipe and retract
G1 X112.573 Y115.744 E-0.01356 ; wipe and retract
G1 X112.437 Y115.842 E-0.04443 ; wipe and retract
G1 X112.411 Y115.928 E-0.02375 ; wipe and retract
G1 X112.233 Y116.075 E-0.06085 ; wipe and retract
G1 X112.046 Y116.133 E-0.05145 ; wipe and retract
G1 X111.902 Y116.132 E-0.03818 ; wipe and retract
G1 X111.764 Y116.101 E-0.03736 ; wipe and retract
G1 X111.692 Y116.062 E-0.02155 ; wipe and retract
G1 X111.613 Y115.969 E-0.03203 ; wipe and retract
G1 X111.564 Y115.785 E-0.05021 ; wipe and retract
G1 X111.577 Y115.683 E-0.02723 ; wipe and retract
;WIPE_END
G1 E-1.67743 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X115.450 Y114.791 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.526 Y114.858 E0.00467 ; perimeter
G1 X115.578 Y114.937 E0.00441 ; perimeter
G1 X115.617 Y115.072 E0.00651 ; perimeter
G1 X115.619 Y115.212 E0.00647 ; perimeter
G1 X115.587 Y115.333 E0.00579 ; perimeter
G1 X115.546 Y115.402 E0.00371 ; perimeter
G1 X115.316 Y115.625 E0.01483 ; perimeter
G1 X114.936 Y115.884 E0.02130 ; perimeter
G1 X114.636 Y115.978 E0.01459 ; perimeter
G1 X114.498 Y116.001 E0.00646 ; perimeter
G1 X114.114 Y116.054 E0.01795 ; perimeter
G1 X113.890 Y116.057 E0.01041 ; perimeter
G1 X113.724 Y116.009 E0.00800 ; perimeter
G1 X113.476 Y115.883 E0.01286 ; perimeter
G1 X113.315 Y115.678 E0.01208 ; perimeter
G1 X113.379 Y115.640 E0.00348 ; perimeter
G1 X113.520 Y115.419 E0.01212 ; perimeter
G1 X113.688 Y115.306 E0.00941 ; perimeter
G1 X114.069 Y115.197 E0.01834 ; perimeter
G1 X114.462 Y115.122 E0.01855 ; perimeter
G1 X115.069 Y114.767 E0.03254 ; perimeter
G1 X115.355 Y114.754 E0.01326 ; perimeter
G1 X115.394 Y114.769 E0.00195 ; perimeter
G1 X115.452 Y114.892 F10800.000 ; move inwards before travel
G1 X115.216 Y115.162 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.400054
G1 F2400.000
G1 X114.739 Y115.477 E0.01699 ; infill
G1 X114.586 Y115.539 E0.00489 ; infill
G1 X113.644 Y115.697 E0.02839 ; infill
G1 X113.669 Y115.634 F10800.000 ; move to first infill point
;WIDTH:0.324234
G1 F2400.000
G1 X114.635 Y115.726 E0.02271 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.669 Y115.634 E-0.25616 ; wipe and retract
;WIPE_END
G1 E-2.14384 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X115.385 Y111.624 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.250 Y111.536 E0.00746 ; perimeter
G1 X115.186 Y111.406 E0.00674 ; perimeter
G1 X115.155 Y111.275 E0.00623 ; perimeter
G1 X115.159 Y111.134 E0.00653 ; perimeter
G1 X115.223 Y111.000 E0.00687 ; perimeter
G1 X115.230 Y110.892 E0.00501 ; perimeter
G1 X115.284 Y110.827 E0.00391 ; perimeter
G1 X115.401 Y110.769 E0.00603 ; perimeter
G1 X115.554 Y110.755 E0.00714 ; perimeter
G1 X115.720 Y110.806 E0.00805 ; perimeter
G1 X115.785 Y110.861 E0.00393 ; perimeter
G1 X115.870 Y111.057 E0.00991 ; perimeter
G1 X115.883 Y111.190 E0.00619 ; perimeter
G1 X115.836 Y111.423 E0.01098 ; perimeter
G1 X115.659 Y111.613 E0.01205 ; perimeter
G1 X115.559 Y111.644 E0.00484 ; perimeter
G1 X115.445 Y111.631 E0.00531 ; perimeter
G1 X115.360 Y111.464 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.250 Y111.536 E-0.05715 ; wipe and retract
G1 X115.186 Y111.406 E-0.03839 ; wipe and retract
G1 X115.155 Y111.275 E-0.03547 ; wipe and retract
G1 X115.159 Y111.134 E-0.03722 ; wipe and retract
G1 X115.223 Y111.000 E-0.03915 ; wipe and retract
G1 X115.230 Y110.892 E-0.02854 ; wipe and retract
G1 X115.284 Y110.827 E-0.02226 ; wipe and retract
G1 X115.401 Y110.769 E-0.03433 ; wipe and retract
G1 X115.554 Y110.755 E-0.04070 ; wipe and retract
G1 X115.720 Y110.806 E-0.04584 ; wipe and retract
G1 X115.785 Y110.861 E-0.02241 ; wipe and retract
G1 X115.870 Y111.057 E-0.05644 ; wipe and retract
G1 X115.883 Y111.190 E-0.03527 ; wipe and retract
G1 X115.836 Y111.423 E-0.06256 ; wipe and retract
G1 X115.659 Y111.613 E-0.06864 ; wipe and retract
G1 X115.559 Y111.644 E-0.02757 ; wipe and retract
G1 X115.445 Y111.631 E-0.03027 ; wipe and retract
;WIPE_END
G1 E-1.71780 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X115.511 Y106.192 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.230 Y106.084 E0.01397 ; perimeter
G1 X115.136 Y105.907 E0.00928 ; perimeter
G1 X115.116 Y105.739 E0.00783 ; perimeter
G1 X115.131 Y105.566 E0.00805 ; perimeter
G1 X115.176 Y105.444 E0.00600 ; perimeter
G1 X115.362 Y105.276 E0.01164 ; perimeter
G1 X115.700 Y105.313 E0.01572 ; perimeter
G1 X115.869 Y105.498 E0.01163 ; perimeter
G1 X115.891 Y105.864 E0.01697 ; perimeter
G1 X115.786 Y106.091 E0.01157 ; perimeter
G1 X115.699 Y106.159 E0.00513 ; perimeter
G1 X115.570 Y106.180 E0.00607 ; perimeter
G1 X115.395 Y105.914 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.230 Y106.084 E-0.09324 ; wipe and retract
G1 X115.136 Y105.907 E-0.05288 ; wipe and retract
G1 X115.116 Y105.739 E-0.04464 ; wipe and retract
G1 X115.131 Y105.566 E-0.04589 ; wipe and retract
G1 X115.176 Y105.444 E-0.03418 ; wipe and retract
G1 X115.362 Y105.276 E-0.06629 ; wipe and retract
G1 X115.700 Y105.313 E-0.08958 ; wipe and retract
G1 X115.869 Y105.498 E-0.06624 ; wipe and retract
G1 X115.891 Y105.864 E-0.09669 ; wipe and retract
G1 X115.786 Y106.091 E-0.06593 ; wipe and retract
G1 X115.699 Y106.159 E-0.02923 ; wipe and retract
G1 X115.570 Y106.180 E-0.03456 ; wipe and retract
;WIPE_END
G1 E-1.68066 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X114.930 Y103.296 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.847 Y103.348 E0.00455 ; perimeter
G1 X114.633 Y103.399 E0.01019 ; perimeter
G1 X114.394 Y103.357 E0.01122 ; perimeter
G1 X114.277 Y103.282 E0.00646 ; perimeter
G1 X114.175 Y103.088 E0.01014 ; perimeter
G1 X114.146 Y102.858 E0.01078 ; perimeter
G1 X114.214 Y102.669 E0.00928 ; perimeter
G1 X114.344 Y102.577 E0.00736 ; perimeter
G1 X114.545 Y102.538 E0.00951 ; perimeter
G1 X114.715 Y102.567 E0.00799 ; perimeter
G1 X114.926 Y102.707 E0.01173 ; perimeter
G1 X114.971 Y102.764 E0.00336 ; perimeter
G1 X115.049 Y102.952 E0.00943 ; perimeter
G1 X115.046 Y103.080 E0.00591 ; perimeter
G1 X115.019 Y103.175 E0.00459 ; perimeter
G1 X114.966 Y103.247 E0.00416 ; perimeter
G1 X114.837 Y103.265 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.847 Y103.348 E-0.04107 ; wipe and retract
G1 X114.633 Y103.399 E-0.05803 ; wipe and retract
G1 X114.394 Y103.357 E-0.06393 ; wipe and retract
G1 X114.277 Y103.282 E-0.03683 ; wipe and retract
G1 X114.175 Y103.088 E-0.05776 ; wipe and retract
G1 X114.146 Y102.858 E-0.06140 ; wipe and retract
G1 X114.214 Y102.669 E-0.05287 ; wipe and retract
G1 X114.344 Y102.577 E-0.04195 ; wipe and retract
G1 X114.545 Y102.538 E-0.05417 ; wipe and retract
G1 X114.715 Y102.567 E-0.04551 ; wipe and retract
G1 X114.926 Y102.707 E-0.06685 ; wipe and retract
G1 X114.971 Y102.764 E-0.01916 ; wipe and retract
G1 X115.049 Y102.952 E-0.05372 ; wipe and retract
G1 X115.046 Y103.080 E-0.03369 ; wipe and retract
G1 X115.019 Y103.175 E-0.02617 ; wipe and retract
G1 X114.966 Y103.247 E-0.02370 ; wipe and retract
;WIPE_END
G1 E-1.66319 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X109.001 Y99.043 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.202 Y99.174 E0.01109 ; perimeter
G1 X109.348 Y99.381 E0.01174 ; perimeter
G1 X109.488 Y99.711 E0.01661 ; perimeter
G1 X109.558 Y100.025 E0.01490 ; perimeter
G1 X109.710 Y100.339 E0.01615 ; perimeter
G1 X109.716 Y100.405 E0.00307 ; perimeter
G1 X109.873 Y100.705 E0.01571 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.921 Y100.797 E0.00434 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.958 Y100.869 E0.00373 ; perimeter
G1 X110.236 Y101.175 E0.01917 ; perimeter
G1 X110.451 Y101.273 E0.01091 ; perimeter
G1 X110.579 Y101.391 E0.00810 ; perimeter
G1 X110.819 Y101.473 E0.01174 ; perimeter
G1 X110.884 Y101.531 E0.00404 ; perimeter
G1 X111.145 Y101.654 E0.01333 ; perimeter
G1 X111.465 Y101.951 E0.02025 ; perimeter
G1 X111.594 Y102.095 E0.00895 ; perimeter
G1 X111.897 Y102.332 E0.01781 ; perimeter
G1 X111.993 Y102.441 E0.00673 ; perimeter
G1 X112.099 Y102.498 E0.00556 ; perimeter
G1 X112.188 Y102.604 E0.00643 ; perimeter
G1 X112.201 Y102.687 E0.00387 ; perimeter
G1 X112.307 Y102.889 E0.01056 ; perimeter
G1 X112.270 Y103.039 E0.00716 ; perimeter
G1 X112.224 Y103.093 E0.00330 ; perimeter
G1 X112.060 Y103.159 E0.00821 ; perimeter
G1 X111.800 Y103.157 E0.01203 ; perimeter
G1 X111.605 Y103.099 E0.00943 ; perimeter
G1 X111.389 Y102.977 E0.01147 ; perimeter
G1 X110.456 Y102.230 E0.05535 ; perimeter
G1 X110.154 Y101.928 E0.01982 ; perimeter
G1 X110.008 Y101.722 E0.01168 ; perimeter
G1 X109.811 Y101.341 E0.01985 ; perimeter
G1 X109.763 Y101.125 E0.01028 ; perimeter
G1 X109.697 Y101.046 E0.00476 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.496 Y100.778 E0.01401 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.341 Y100.464 E0.01620 ; perimeter
G1 X109.169 Y100.380 E0.00887 ; perimeter
G1 X108.744 Y99.957 E0.02779 ; perimeter
G1 X108.566 Y99.670 E0.01565 ; perimeter
G1 X108.530 Y99.479 E0.00900 ; perimeter
G1 X108.609 Y99.202 E0.01333 ; perimeter
G1 X108.644 Y99.152 E0.00283 ; perimeter
G1 X108.829 Y99.054 E0.00970 ; perimeter
G1 X108.942 Y99.045 E0.00526 ; perimeter
G1 X109.058 Y99.276 F10800.000 ; move inwards before travel
G1 X108.920 Y99.288 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.218269
G1 F2400.000
G1 X108.917 Y99.346 E0.00084 ; infill
;WIDTH:0.258826
G1 X108.915 Y99.403 E0.00103 ; infill
;WIDTH:0.290529
G1 X108.924 Y99.428 E0.00055 ; infill
;WIDTH:0.326832
G1 X108.951 Y99.521 E0.00228 ; infill
G1 X109.057 Y99.708 E0.00509 ; infill
G1 X109.339 Y100.126 E0.01191 ; infill
G1 X110.180 Y101.414 F10800.000 ; move to first infill point
;WIDTH:0.363575
G1 F2400.000
G1 X110.644 Y101.853 E0.01702 ; infill
G1 X110.879 Y102.010 E0.00755 ; infill
G1 X111.319 Y102.398 E0.01563 ; infill
G1 X111.664 Y102.672 E0.01175 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.319 Y102.398 E-0.11632 ; wipe and retract
G1 X110.879 Y102.010 E-0.15466 ; wipe and retract
G1 X110.644 Y101.853 E-0.07469 ; wipe and retract
G1 X110.180 Y101.414 E-0.16841 ; wipe and retract
;WIPE_END
G1 E-1.88592 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X107.000 Y97.990 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.904 Y98.121 E0.00749 ; perimeter
G1 X106.557 Y98.356 E0.01944 ; perimeter
G1 X106.142 Y98.428 E0.01947 ; perimeter
G1 X105.803 Y98.328 E0.01639 ; perimeter
G1 X105.628 Y98.184 E0.01049 ; perimeter
G1 X105.631 Y98.094 E0.00415 ; perimeter
G1 X105.657 Y98.056 E0.00217 ; perimeter
G1 X105.677 Y97.917 E0.00650 ; perimeter
G1 X105.957 Y97.716 E0.01595 ; perimeter
G1 X106.172 Y97.600 E0.01129 ; perimeter
G1 X106.586 Y97.499 E0.01977 ; perimeter
G1 X106.895 Y97.565 E0.01464 ; perimeter
G1 X107.007 Y97.664 E0.00690 ; perimeter
G1 X107.065 Y97.833 E0.00832 ; perimeter
G1 X107.042 Y97.948 E0.00540 ; perimeter
G1 X106.839 Y98.006 F10800.000 ; move inwards before travel
G1 X106.812 Y97.838 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.292938
G1 F2400.000
G1 X106.617 Y97.871 E0.00411 ; infill
G1 X106.401 Y97.969 E0.00493 ; infill
G1 X106.159 Y98.039 E0.00522 ; infill
G1 X105.956 Y98.124 E0.00459 ; infill
G1 X106.129 Y97.897 F10800.000 ; move to first infill point
;WIDTH:0.149865
G1 F2400.000
G1 X106.807 Y97.825 E0.00607 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.129 Y97.897 E-0.18007 ; wipe and retract
;WIPE_END
G1 E-2.21993 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X104.018 Y96.358 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.666 Y96.156 E0.01374 ; perimeter
G1 X104.058 Y96.178 E0.01329 ; perimeter
G1 X104.043 Y96.303 E0.00427 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.666 Y96.156 E-0.10685 ; wipe and retract
G1 X104.058 Y96.178 E-0.10363 ; wipe and retract
G1 X104.043 Y96.303 E-0.03331 ; wipe and retract
;WIPE_END
G1 E-2.15621 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X101.044 Y96.375 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.013 Y96.458 E0.00298 ; perimeter
G1 X100.906 Y96.556 E0.00493 ; perimeter
G1 X100.684 Y96.457 E0.00824 ; perimeter
G1 X100.826 Y96.466 E0.00481 ; perimeter
G1 X100.988 Y96.398 E0.00597 ; perimeter
G1 X100.745 Y95.978 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.228 Y95.775 E0.02427 ; perimeter
G1 X101.473 Y95.618 E0.01347 ; perimeter
G1 X101.552 Y95.546 E0.00493 ; perimeter
G1 X101.829 Y95.412 E0.01428 ; perimeter
G1 X102.096 Y95.346 E0.01274 ; perimeter
G1 X102.597 Y95.424 E0.02349 ; perimeter
G1 X103.129 Y95.604 E0.02600 ; perimeter
G1 X103.680 Y95.674 E0.02574 ; perimeter
G1 X104.123 Y95.695 E0.02054 ; perimeter
G1 X104.356 Y95.761 E0.01125 ; perimeter
G1 X104.460 Y95.841 E0.00605 ; perimeter
G1 X104.508 Y95.917 E0.00417 ; perimeter
G1 X104.550 Y96.057 E0.00675 ; perimeter
G1 X104.525 Y96.410 E0.01642 ; perimeter
G1 X104.398 Y96.684 E0.01396 ; perimeter
G1 X104.219 Y96.887 E0.01254 ; perimeter
G1 X104.080 Y96.930 E0.00676 ; perimeter
G1 X103.765 Y96.795 E0.01587 ; perimeter
G1 X103.697 Y96.721 E0.00464 ; perimeter
G1 X103.131 Y96.413 E0.02987 ; perimeter
G1 X102.548 Y96.245 E0.02811 ; perimeter
G1 X101.889 Y96.308 E0.03067 ; perimeter
G1 X101.464 Y96.629 E0.02467 ; perimeter
G1 X101.428 Y96.728 E0.00486 ; perimeter
G1 X101.238 Y96.910 E0.01219 ; perimeter
G1 X101.046 Y97.052 E0.01109 ; perimeter
G1 X100.819 Y97.045 E0.01052 ; perimeter
G1 X100.361 Y96.840 E0.02325 ; perimeter
G1 X100.198 Y96.831 E0.00754 ; perimeter
G1 X100.059 Y96.760 E0.00724 ; perimeter
G1 X99.740 Y96.712 E0.01492 ; perimeter
G1 X99.561 Y96.616 E0.00941 ; perimeter
G1 X99.513 Y96.371 E0.01157 ; perimeter
G1 X99.576 Y96.170 E0.00976 ; perimeter
G1 X99.667 Y96.096 E0.00543 ; perimeter
G1 X99.878 Y96.009 E0.01059 ; perimeter
G1 X100.422 Y95.955 E0.02531 ; perimeter
G1 X100.685 Y95.973 E0.01224 ; perimeter
G1 X101.032 Y96.256 F10800.000 ; move inwards before travel
G1 X100.448 Y96.408 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.368605
G1 F2400.000
G1 X100.156 Y96.377 E0.00795 ; infill
;WIDTH:0.347692
G1 X99.767 Y96.367 E0.00987 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.156 Y96.377 E-0.10273 ; wipe and retract
;WIPE_END
G1 E-2.29727 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X102.486 Y95.829 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.448779
G1 F2400.000
G1 X102.111 Y95.820 E0.01264 ; infill
G1 X101.887 Y95.869 E0.00775 ; infill
;WIDTH:0.434603
G1 X101.790 Y95.897 E0.00329 ; infill
;WIDTH:0.398805
G1 X101.730 Y95.929 E0.00201 ; infill
;WIDTH:0.364952
G1 X101.373 Y96.177 E0.01165 ; infill
G1 X101.823 Y95.682 F10800.000 ; move to first infill point
;WIDTH:0.338663
G1 F2400.000
G1 X102.614 Y95.850 E0.01987 ; infill
G1 X103.056 Y95.987 E0.01138 ; infill
;WIDTH:0.374302
G1 X103.278 Y96.033 E0.00625 ; infill
G1 X103.386 Y96.262 E0.00697 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.278 Y96.033 E-0.06677 ; wipe and retract
G1 X103.056 Y95.987 E-0.05983 ; wipe and retract
;WIPE_END
G1 E-2.27340 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X101.153 Y101.351 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.296 Y101.493 E0.00936 ; perimeter
G1 X101.356 Y101.600 E0.00568 ; perimeter
G1 X101.424 Y101.828 E0.01100 ; perimeter
G1 X101.416 Y101.987 E0.00741 ; perimeter
G1 X101.331 Y102.133 E0.00783 ; perimeter
G1 X101.181 Y102.252 E0.00888 ; perimeter
G1 X101.008 Y102.304 E0.00835 ; perimeter
G1 X100.630 Y102.319 E0.01753 ; perimeter
G1 X100.516 Y102.270 E0.00574 ; perimeter
G1 X100.368 Y102.139 E0.00917 ; perimeter
G1 X100.180 Y101.709 E0.02174 ; perimeter
G1 X100.193 Y101.479 E0.01067 ; perimeter
G1 X100.085 Y101.301 E0.00960 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.068 Y101.274 E0.00137 ; perimeter (bridge)
G1 X100.092 Y101.291 E0.00124 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.349 Y101.481 E0.01481 ; perimeter
G1 X100.548 Y101.353 E0.01096 ; perimeter
G1 X100.878 Y101.430 E0.01570 ; perimeter
G1 X100.945 Y101.327 E0.00567 ; perimeter
G1 X101.094 Y101.340 E0.00693 ; perimeter
G1 X101.172 Y101.552 F10800.000 ; move inwards before travel
G1 X99.819 Y100.051 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.749 Y99.847 E0.00729 ; perimeter
G1 X99.886 Y99.917 E0.00520 ; perimeter
G1 X99.846 Y99.997 E0.00304 ; perimeter
G1 X100.373 Y100.121 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.294 Y100.177 E0.00446 ; perimeter
G1 X100.170 Y100.428 E0.01294 ; perimeter
G1 X100.108 Y100.455 E0.00313 ; perimeter
G1 X99.948 Y100.950 E0.02411 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.920 Y101.034 E0.00371 ; perimeter (bridge)
G1 X99.851 Y100.951 E0.00450 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.647 Y100.707 E0.01476 ; perimeter
G1 X99.392 Y100.290 E0.02264 ; perimeter
G1 X99.262 Y99.914 E0.01841 ; perimeter
G1 X99.250 Y99.722 E0.00891 ; perimeter
G1 X99.270 Y99.448 E0.01271 ; perimeter
G1 X99.329 Y99.296 E0.00757 ; perimeter
G1 X99.455 Y99.282 E0.00590 ; perimeter
G1 X99.746 Y99.326 E0.01361 ; perimeter
G1 X100.122 Y99.478 E0.01880 ; perimeter
G1 X100.308 Y99.651 E0.01176 ; perimeter
G1 X100.378 Y99.862 E0.01031 ; perimeter
G1 X100.376 Y100.061 E0.00924 ; perimeter
G1 X100.276 Y100.115 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.294 Y100.177 E-0.03739 ; wipe and retract
G1 X100.170 Y100.428 E-0.07372 ; wipe and retract
G1 X100.108 Y100.455 E-0.01782 ; wipe and retract
G1 X99.948 Y100.950 E-0.13735 ; wipe and retract
;WIPE_END
G1 E-2.13372 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X103.012 Y106.654 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.134 Y106.764 E0.00557 ; perimeter
G1 X103.690 Y107.151 E0.02294 ; perimeter
G1 X103.882 Y107.199 E0.00670 ; perimeter
G1 X103.622 Y107.336 E0.00993 ; perimeter
G1 X103.509 Y107.543 E0.00797 ; perimeter
G1 X103.242 Y107.782 E0.01213 ; perimeter
G1 X103.204 Y108.004 E0.00761 ; perimeter
G1 X103.109 Y107.812 E0.00723 ; perimeter
G1 X103.205 Y107.204 E0.02083 ; perimeter
G1 X103.032 Y106.710 E0.01772 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.134 Y106.764 E-0.03047 ; wipe and retract
G1 X103.690 Y107.151 E-0.17880 ; wipe and retract
G1 X103.882 Y107.199 E-0.05222 ; wipe and retract
G1 X103.622 Y107.336 E-0.07740 ; wipe and retract
G1 X103.509 Y107.543 E-0.06215 ; wipe and retract
G1 X103.242 Y107.782 E-0.09459 ; wipe and retract
G1 X103.204 Y108.004 E-0.05933 ; wipe and retract
G1 X103.109 Y107.812 E-0.05636 ; wipe and retract
G1 X103.205 Y107.204 E-0.16239 ; wipe and retract
G1 X103.032 Y106.710 E-0.13813 ; wipe and retract
;WIPE_END
G1 E-1.48816 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X104.747 Y109.676 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.001 Y109.657 E0.00859 ; perimeter
G1 X105.189 Y109.615 E0.00654 ; perimeter
G1 X104.984 Y109.826 E0.00996 ; perimeter
G1 X104.949 Y109.752 E0.00279 ; perimeter
G1 X104.804 Y109.697 E0.00526 ; perimeter
G1 X104.596 Y110.135 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.448 Y110.079 E0.00736 ; perimeter
G1 X104.280 Y109.953 E0.00971 ; perimeter
G1 X103.988 Y109.854 E0.01431 ; perimeter
G1 X103.593 Y109.806 E0.01839 ; perimeter
G1 X103.197 Y109.693 E0.01910 ; perimeter
G1 X103.099 Y109.618 E0.00571 ; perimeter
G1 X103.055 Y109.500 E0.00586 ; perimeter
G1 X103.147 Y109.359 E0.00776 ; perimeter
G1 X103.119 Y109.176 E0.00860 ; perimeter
G1 X103.144 Y109.100 E0.00372 ; perimeter
G1 X102.986 Y108.508 E0.02837 ; perimeter
G1 X102.753 Y108.209 E0.01756 ; perimeter
G1 X102.613 Y107.866 E0.01716 ; perimeter
G1 X102.710 Y107.249 E0.02894 ; perimeter
G1 X102.576 Y106.867 E0.01876 ; perimeter
G1 X102.435 Y106.699 E0.01016 ; perimeter
G1 X102.327 Y106.459 E0.01218 ; perimeter
G1 X102.310 Y106.259 E0.00927 ; perimeter
G1 X102.337 Y105.991 E0.01250 ; perimeter
G1 X102.201 Y105.711 E0.01444 ; perimeter
G1 X101.943 Y105.457 E0.01673 ; perimeter
G1 X101.664 Y105.260 E0.01584 ; perimeter
G1 X101.573 Y105.098 E0.00860 ; perimeter
G1 X101.541 Y104.917 E0.00853 ; perimeter
G1 X101.571 Y104.781 E0.00644 ; perimeter
G1 X101.708 Y104.623 E0.00968 ; perimeter
G1 X101.867 Y104.555 E0.00803 ; perimeter
G1 X102.069 Y104.570 E0.00938 ; perimeter
G1 X102.232 Y104.658 E0.00858 ; perimeter
G1 X102.317 Y104.750 E0.00576 ; perimeter
G1 X102.379 Y105.024 E0.01303 ; perimeter
G1 X102.335 Y105.554 E0.02462 ; perimeter
G1 X102.574 Y105.792 E0.01566 ; perimeter
G1 X102.899 Y105.946 E0.01665 ; perimeter
G1 X103.124 Y106.085 E0.01224 ; perimeter
G1 X103.174 Y106.151 E0.00380 ; perimeter
G1 X103.435 Y106.385 E0.01626 ; perimeter
G1 X103.893 Y106.705 E0.02587 ; perimeter
G1 X104.330 Y106.814 E0.02090 ; perimeter
G1 X104.726 Y106.997 E0.02018 ; perimeter
G1 X104.855 Y107.166 E0.00985 ; perimeter
G1 X104.846 Y107.194 E0.00135 ; perimeter
G1 X104.671 Y107.332 E0.01033 ; perimeter
G1 X104.259 Y107.507 E0.02070 ; perimeter
G1 X104.189 Y107.582 E0.00478 ; perimeter
G1 X103.975 Y107.695 E0.01119 ; perimeter
G1 X103.892 Y107.846 E0.00801 ; perimeter
G1 X103.689 Y108.029 E0.01268 ; perimeter
G1 X103.595 Y108.563 E0.02510 ; perimeter
G1 X103.698 Y108.682 E0.00728 ; perimeter
G1 X103.803 Y108.984 E0.01481 ; perimeter
G1 X104.115 Y109.145 E0.01626 ; perimeter
G1 X104.536 Y109.209 E0.01970 ; perimeter
G1 X104.930 Y109.179 E0.01831 ; perimeter
G1 X105.934 Y108.968 E0.04753 ; perimeter
G1 X106.123 Y108.993 E0.00885 ; perimeter
G1 X106.186 Y108.977 E0.00298 ; perimeter
G1 X106.328 Y109.035 E0.00715 ; perimeter
G1 X106.363 Y109.070 E0.00225 ; perimeter
G1 X106.503 Y109.478 E0.01998 ; perimeter
G1 X106.350 Y109.644 E0.01050 ; perimeter
G1 X106.192 Y109.668 E0.00739 ; perimeter
G1 X105.902 Y109.768 E0.01421 ; perimeter
G1 X105.792 Y109.848 E0.00631 ; perimeter
G1 X105.604 Y109.880 E0.00884 ; perimeter
G1 X105.042 Y110.459 E0.03734 ; perimeter
G1 X104.852 Y110.552 E0.00980 ; perimeter
G1 X104.744 Y110.449 E0.00692 ; perimeter
G1 X104.622 Y110.189 E0.01329 ; perimeter
G1 X104.605 Y109.976 F10800.000 ; move inwards before travel
G1 X104.513 Y109.610 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334646
G1 F2400.000
G1 X104.297 Y109.557 E0.00541 ; infill
;WIDTH:0.308299
G1 X104.080 Y109.504 E0.00492 ; infill
;WIDTH:0.281952
G1 X103.779 Y109.424 E0.00619 ; infill
;WIDTH:0.402007
G1 X103.378 Y109.274 E0.01279 ; infill
G1 X103.480 Y108.798 F10800.000 ; move to first infill point
;WIDTH:0.292897
G1 F2400.000
G1 X103.494 Y109.207 E0.00851 ; infill
;WIDTH:0.322178
G1 X103.586 Y109.390 E0.00476 ; infill
;WIDTH:0.351458
G1 X103.679 Y109.573 E0.00526 ; infill
G1 X103.554 Y109.544 F10800.000 ; move to first infill point
;WIDTH:0.248455
G1 F2400.000
G1 X103.485 Y109.083 E0.00796 ; infill
;WIDTH:0.227555
G1 X103.341 Y108.616 E0.00750 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.485 Y109.083 E-0.12895 ; wipe and retract
;WIPE_END
G1 E-2.27105 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 X106.185 Y109.293 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.339613
G1 F2400.000
G1 X105.739 Y109.405 E0.01133 ; infill
G1 X105.414 Y109.524 E0.00853 ; infill
G1 X105.399 Y109.497 F10800.000 ; move to first infill point
;WIDTH:0.396307
G1 F2400.000
G1 X106.201 Y109.340 E0.02400 ; infill
;LAYER_CHANGE
;Z:11.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;11.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.399 Y109.497 E-0.21555 ; wipe and retract
;WIPE_END
G1 E-2.18445 F2400.000 ; retract
G1 Z11.075 F10800.000 ; lift Z
G1 Z11.200 ; move to next layer (55)
;AFTER_LAYER_CHANGE
;11.2
G1 Z11.275 ; lift Z
G1 X104.034 Y107.169 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.668 Y107.278 E0.01292 ; perimeter
G1 X103.410 Y107.519 E0.01196 ; perimeter
G1 X103.398 Y107.403 E0.00396 ; perimeter
G1 X103.421 Y107.121 E0.00955 ; perimeter
G1 X103.199 Y106.756 E0.01446 ; perimeter
G1 X103.508 Y107.005 E0.01343 ; perimeter
G1 X103.977 Y107.151 E0.01661 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.668 Y107.278 E-0.08807 ; wipe and retract
G1 X103.410 Y107.519 E-0.09324 ; wipe and retract
G1 X103.398 Y107.403 E-0.03086 ; wipe and retract
G1 X103.421 Y107.121 E-0.07447 ; wipe and retract
G1 X103.199 Y106.756 E-0.11272 ; wipe and retract
G1 X103.508 Y107.005 E-0.10470 ; wipe and retract
G1 X103.977 Y107.151 E-0.12948 ; wipe and retract
;WIPE_END
G1 E-1.76646 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X106.116 Y109.332 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.267 Y109.289 E0.00532 ; perimeter
G1 X106.300 Y109.357 E0.00259 ; perimeter
G1 X106.175 Y109.340 E0.00428 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.267 Y109.289 E-0.02777 ; wipe and retract
G1 X106.300 Y109.357 E-0.02018 ; wipe and retract
G1 X106.175 Y109.340 E-0.03339 ; wipe and retract
;WIPE_END
G1 E-2.31866 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X103.533 Y109.054 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.044 Y109.345 E0.02725 ; perimeter
G1 X104.375 Y109.312 E0.01540 ; perimeter
G1 X104.662 Y109.359 E0.01349 ; perimeter
G1 X104.935 Y109.219 E0.01422 ; perimeter
G1 X105.235 Y109.175 E0.01404 ; perimeter
G1 X105.515 Y109.045 E0.01426 ; perimeter
G1 X105.553 Y109.003 E0.00265 ; perimeter
G1 X106.128 Y108.825 E0.02787 ; perimeter
G1 X106.331 Y108.783 E0.00959 ; perimeter
G1 X106.517 Y108.830 E0.00890 ; perimeter
G1 X106.650 Y108.974 E0.00909 ; perimeter
G1 X106.794 Y109.269 E0.01521 ; perimeter
G1 X106.959 Y109.722 E0.02230 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.293 Y110.639 E0.04083 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.621 Y111.615 E0.04766 ; perimeter
G1 X107.665 Y111.856 E0.01136 ; perimeter
G1 X107.616 Y112.102 E0.01159 ; perimeter
G1 X107.552 Y112.177 E0.00456 ; perimeter
G1 X107.514 Y112.263 E0.00438 ; perimeter
G1 X107.161 Y112.613 E0.02300 ; perimeter
G1 X106.992 Y112.725 E0.00943 ; perimeter
G1 X106.735 Y112.852 E0.01324 ; perimeter
G1 X106.494 Y112.901 E0.01142 ; perimeter
G1 X106.352 Y112.858 E0.00688 ; perimeter
G1 X106.260 Y112.697 E0.00860 ; perimeter
G1 X106.329 Y112.376 E0.01517 ; perimeter
G1 X106.394 Y112.293 E0.00489 ; perimeter
G1 X106.532 Y112.204 E0.00763 ; perimeter
G1 X106.647 Y111.978 E0.01173 ; perimeter
G1 X106.857 Y111.760 E0.01403 ; perimeter
G1 X107.099 Y111.378 E0.02095 ; perimeter
G1 X107.068 Y111.185 E0.00904 ; perimeter
G1 X107.088 Y110.908 E0.01286 ; perimeter
G1 X107.025 Y110.723 E0.00907 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.028 Y110.565 E0.00658 ; perimeter (bridge)
G1 X106.721 Y110.134 E0.02214 ; perimeter (bridge)
G1 X106.669 Y110.035 E0.00465 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.591 Y109.885 E0.00784 ; perimeter
G1 X106.071 Y109.812 E0.02432 ; perimeter
G1 X105.785 Y109.840 E0.01332 ; perimeter
G1 X105.489 Y109.913 E0.01413 ; perimeter
G1 X105.038 Y110.162 E0.02387 ; perimeter
G1 X104.819 Y110.084 E0.01080 ; perimeter
G1 X104.754 Y109.947 E0.00699 ; perimeter
G1 X103.709 Y109.581 E0.05131 ; perimeter
G1 X103.517 Y109.464 E0.01043 ; perimeter
G1 X103.396 Y109.061 E0.01948 ; perimeter
G1 X103.335 Y108.993 E0.00425 ; perimeter
G1 X103.330 Y108.936 E0.00266 ; perimeter
G1 X102.930 Y107.894 E0.05169 ; perimeter
G1 X102.913 Y107.428 E0.02160 ; perimeter
G1 X102.928 Y107.239 E0.00880 ; perimeter
G1 X102.739 Y106.927 E0.01687 ; perimeter
G1 X102.516 Y106.687 E0.01517 ; perimeter
G1 X102.376 Y106.423 E0.01383 ; perimeter
G1 X102.379 Y106.248 E0.00811 ; perimeter
G1 X102.261 Y105.771 E0.02277 ; perimeter
G1 X101.968 Y105.475 E0.01928 ; perimeter
G1 X101.702 Y105.283 E0.01519 ; perimeter
G1 X101.580 Y105.056 E0.01192 ; perimeter
G1 X101.567 Y104.949 E0.00501 ; perimeter
G1 X101.588 Y104.848 E0.00480 ; perimeter
G1 X101.732 Y104.655 E0.01116 ; perimeter
G1 X101.877 Y104.600 E0.00714 ; perimeter
G1 X102.096 Y104.606 E0.01018 ; perimeter
G1 X102.249 Y104.672 E0.00771 ; perimeter
G1 X102.349 Y104.781 E0.00685 ; perimeter
G1 X102.389 Y104.869 E0.00448 ; perimeter
G1 X102.427 Y105.434 E0.02622 ; perimeter
G1 X102.579 Y105.729 E0.01536 ; perimeter
G1 X102.957 Y105.915 E0.01952 ; perimeter
G1 X103.184 Y106.052 E0.01226 ; perimeter
G1 X103.326 Y106.241 E0.01096 ; perimeter
G1 X103.739 Y106.572 E0.02450 ; perimeter
G1 X104.202 Y106.716 E0.02249 ; perimeter
G1 X104.695 Y106.809 E0.02323 ; perimeter
G1 X105.058 Y106.957 E0.01813 ; perimeter
G1 X105.222 Y107.073 E0.00934 ; perimeter
G1 X105.234 Y107.239 E0.00771 ; perimeter
G1 X104.726 Y107.493 E0.02630 ; perimeter
G1 X104.410 Y107.547 E0.01484 ; perimeter
G1 X104.241 Y107.634 E0.00881 ; perimeter
G1 X104.155 Y107.635 E0.00397 ; perimeter
G1 X103.914 Y107.708 E0.01166 ; perimeter
G1 X103.664 Y107.941 E0.01589 ; perimeter
G1 X103.514 Y108.182 E0.01314 ; perimeter
G1 X103.430 Y108.441 E0.01259 ; perimeter
G1 X103.520 Y108.689 E0.01221 ; perimeter
G1 X103.531 Y108.994 E0.01414 ; perimeter
G1 X103.419 Y109.437 F10800.000 ; move inwards before travel
G1 X103.252 Y108.059 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.12333
G1 F2400.000
G1 X103.362 Y107.925 E0.00116 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.252 Y108.059 E-0.04587 ; wipe and retract
;WIPE_END
G1 E-2.35413 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X105.087 Y109.637 ; move to first infill point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.433162
G1 F2400.000
G1 X105.207 Y109.597 E0.00411 ; infill
;WIDTH:0.339044
G1 X105.367 Y109.542 E0.00417 ; infill
;WIDTH:0.3727
G1 X105.533 Y109.484 E0.00482 ; infill
;WIDTH:0.406355
G1 X105.699 Y109.426 E0.00531 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.533 Y109.484 E-0.04638 ; wipe and retract
;WIPE_END
G1 E-2.35362 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X107.364 Y111.602 ; move to first infill point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.374064
G1 F2400.000
G1 X107.238 Y111.919 E0.00940 ; infill
G1 X107.166 Y112.032 E0.00368 ; infill
G1 X106.986 Y112.219 E0.00717 ; infill
G1 X106.683 Y112.609 E0.01359 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.986 Y112.219 E-0.13020 ; wipe and retract
G1 X107.166 Y112.032 E-0.06869 ; wipe and retract
G1 X107.238 Y111.919 E-0.03527 ; wipe and retract
G1 X107.364 Y111.602 E-0.09007 ; wipe and retract
;WIPE_END
G1 E-2.07578 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X99.742 Y100.088 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.648 Y99.833 E0.00921 ; perimeter
G1 X99.745 Y99.929 E0.00463 ; perimeter
G1 X99.762 Y99.975 E0.00167 ; perimeter
G1 X99.752 Y100.029 E0.00186 ; perimeter
G1 X100.413 Y101.301 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.655 Y101.371 E0.01168 ; perimeter
G1 X100.795 Y101.459 E0.00764 ; perimeter
G1 X100.950 Y101.444 E0.00721 ; perimeter
G1 X101.195 Y101.587 E0.01316 ; perimeter
G1 X101.293 Y101.814 E0.01144 ; perimeter
G1 X101.289 Y101.985 E0.00794 ; perimeter
G1 X101.116 Y102.218 E0.01343 ; perimeter
G1 X100.882 Y102.357 E0.01260 ; perimeter
G1 X100.497 Y102.355 E0.01785 ; perimeter
G1 X100.369 Y102.298 E0.00646 ; perimeter
G1 X100.289 Y102.227 E0.00496 ; perimeter
G1 X100.097 Y101.930 E0.01641 ; perimeter
G1 X99.931 Y101.561 E0.01873 ; perimeter
G1 X99.393 Y100.536 E0.05363 ; perimeter
G1 X99.171 Y99.933 E0.02975 ; perimeter
G1 X99.127 Y99.723 E0.00997 ; perimeter
G1 X99.099 Y99.314 E0.01899 ; perimeter
G1 X99.178 Y98.810 E0.02361 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.193 Y98.766 E0.00196 ; perimeter (bridge)
G1 X99.231 Y98.805 E0.00226 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.304 Y98.878 E0.00479 ; perimeter
G1 X99.331 Y98.879 E0.00128 ; perimeter
G1 X99.408 Y98.990 E0.00624 ; perimeter
G1 X99.496 Y99.015 E0.00422 ; perimeter
G1 X99.603 Y99.191 E0.00953 ; perimeter
G1 X99.878 Y99.343 E0.01454 ; perimeter
G1 X99.930 Y99.434 E0.00490 ; perimeter
G1 X100.159 Y99.660 E0.01489 ; perimeter
G1 X100.260 Y99.931 E0.01339 ; perimeter
G1 X100.216 Y100.176 E0.01157 ; perimeter
G1 X100.218 Y100.316 E0.00648 ; perimeter
G1 X100.145 Y100.579 E0.01263 ; perimeter
G1 X100.223 Y101.056 E0.02237 ; perimeter
G1 X100.376 Y101.253 E0.01159 ; perimeter
G1 X100.395 Y101.552 F10800.000 ; move inwards before travel
G1 X100.131 Y101.371 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.107199
G1 F2400.000
G1 X100.177 Y101.442 E0.00045 ; infill
;WIDTH:0.133721
G1 X100.235 Y101.538 E0.00084 ; infill
;WIDTH:0.151434
G1 X100.726 Y102.115 E0.00684 ; infill
G1 X100.898 Y102.067 F10800.000 ; move to first infill point
;WIDTH:0.396193
G1 F2400.000
G1 X100.182 Y101.532 E0.02625 ; infill
G1 X100.120 Y101.402 F10800.000 ; move to first infill point
;WIDTH:0.452465
G1 F2400.000
G1 X100.622 Y101.895 E0.02395 ; infill
G1 X100.755 Y101.910 E0.00455 ; infill
G1 X101.050 Y101.897 E0.01006 ; infill
G1 X99.952 Y101.033 F10800.000 ; move to first infill point
;WIDTH:0.145035
G1 F2400.000
G1 X99.902 Y100.882 E0.00135 ; infill
;WIDTH:0.19315
G1 X99.851 Y100.732 E0.00198 ; infill
;WIDTH:0.241265
G1 X99.801 Y100.581 E0.00262 ; infill
;WIDTH:0.266299
G1 X99.747 Y100.329 E0.00479 ; infill
G1 X99.507 Y99.637 F10800.000 ; move to first infill point
;WIDTH:0.154399
G1 F2400.000
G1 X99.345 Y99.297 E0.00348 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.507 Y99.637 E-0.09917 ; wipe and retract
;WIPE_END
G1 E-2.30083 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X103.816 Y96.140 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.052 Y96.078 E0.00827 ; perimeter
G1 X104.114 Y96.083 E0.00211 ; perimeter
G1 X104.065 Y96.182 E0.00375 ; perimeter
G1 X104.009 Y96.212 E0.00214 ; perimeter
G1 X103.870 Y96.164 E0.00498 ; perimeter
G1 X102.234 Y95.778 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X101.908 Y95.847 E0.01128 ; perimeter
G1 X102.010 Y95.756 E0.00463 ; perimeter
G1 X102.102 Y95.733 E0.00320 ; perimeter
G1 X102.178 Y95.759 E0.00270 ; perimeter
G1 X103.158 Y95.629 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.336 Y95.649 E0.00832 ; perimeter
G1 X103.511 Y95.624 E0.00818 ; perimeter
G1 X103.771 Y95.653 E0.01211 ; perimeter
G1 X104.009 Y95.591 E0.01139 ; perimeter
G1 X104.219 Y95.608 E0.00976 ; perimeter
G1 X104.473 Y95.669 E0.01212 ; perimeter
G1 X104.579 Y95.794 E0.00760 ; perimeter
G1 X104.614 Y95.939 E0.00692 ; perimeter
G1 X104.585 Y96.214 E0.01277 ; perimeter
G1 X104.508 Y96.388 E0.00882 ; perimeter
G1 X104.398 Y96.550 E0.00910 ; perimeter
G1 X104.288 Y96.610 E0.00580 ; perimeter
G1 X104.245 Y96.658 E0.00297 ; perimeter
G1 X104.051 Y96.720 E0.00944 ; perimeter
G1 X103.775 Y96.651 E0.01318 ; perimeter
G1 X103.349 Y96.458 E0.02165 ; perimeter
G1 X102.570 Y96.244 E0.03742 ; perimeter
G1 X102.306 Y96.256 E0.01226 ; perimeter
G1 X101.777 Y96.367 E0.02502 ; perimeter
G1 X101.303 Y96.599 E0.02446 ; perimeter
G1 X101.086 Y96.776 E0.01297 ; perimeter
G1 X100.813 Y96.852 E0.01314 ; perimeter
G1 X100.760 Y96.829 E0.00268 ; perimeter
G1 X100.456 Y96.827 E0.01406 ; perimeter
G1 X100.396 Y96.801 E0.00303 ; perimeter
G1 X100.185 Y96.789 E0.00980 ; perimeter
G1 X99.879 Y96.866 E0.01462 ; perimeter
G1 X99.736 Y96.968 E0.00813 ; perimeter
G1 X99.626 Y96.963 E0.00510 ; perimeter
G1 X99.398 Y97.089 E0.01209 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.284 Y97.152 E0.00545 ; perimeter (bridge)
G1 X99.282 Y97.031 E0.00506 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.245 Y96.743 E0.01343 ; perimeter
G1 X99.275 Y96.228 E0.02393 ; perimeter
G1 X99.334 Y96.117 E0.00580 ; perimeter
G1 X99.458 Y96.015 E0.00745 ; perimeter
G1 X99.725 Y95.933 E0.01294 ; perimeter
G1 X100.201 Y95.946 E0.02206 ; perimeter
G1 X100.741 Y96.010 E0.02521 ; perimeter
G1 X101.175 Y95.871 E0.02110 ; perimeter
G1 X101.706 Y95.377 E0.03359 ; perimeter
G1 X101.816 Y95.309 E0.00600 ; perimeter
G1 X102.032 Y95.250 E0.01037 ; perimeter
G1 X102.186 Y95.252 E0.00713 ; perimeter
G1 X102.897 Y95.494 E0.03479 ; perimeter
G1 X103.104 Y95.601 E0.01082 ; perimeter
G1 X103.215 Y95.799 F10800.000 ; move inwards before travel
G1 X101.691 Y95.952 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.270844
G1 F2400.000
G1 X101.334 Y96.191 E0.00815 ; infill
;WIDTH:0.300629
G1 X101.116 Y96.278 E0.00504 ; infill
;WIDTH:0.308555
G1 X101.088 Y96.291 E0.00068 ; infill
;WIDTH:0.350436
G1 X100.989 Y96.345 E0.00287 ; infill
;WIDTH:0.381785
G1 X100.891 Y96.399 E0.00316 ; infill
G1 X100.745 Y96.421 E0.00415 ; infill
;WIDTH:0.392086
G1 X100.463 Y96.392 E0.00823 ; infill
;WIDTH:0.409764
G1 X100.117 Y96.368 E0.01057 ; infill
;WIDTH:0.434036
G1 X99.732 Y96.420 E0.01263 ; infill
G1 X99.498 Y96.758 E0.01338 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.732 Y96.420 E-0.10855 ; wipe and retract
G1 X100.117 Y96.368 E-0.10245 ; wipe and retract
;WIPE_END
G1 E-2.18900 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X105.888 Y97.988 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.907 Y97.910 E0.00372 ; perimeter
G1 X106.149 Y97.651 E0.01641 ; perimeter
G1 X106.347 Y97.541 E0.01048 ; perimeter
G1 X106.765 Y97.431 E0.02004 ; perimeter
G1 X106.868 Y97.441 E0.00481 ; perimeter
G1 X107.114 Y97.510 E0.01184 ; perimeter
G1 X107.182 Y97.574 E0.00429 ; perimeter
G1 X107.274 Y97.805 E0.01154 ; perimeter
G1 X107.266 Y97.926 E0.00563 ; perimeter
G1 X107.167 Y98.026 E0.00652 ; perimeter
G1 X107.029 Y98.086 E0.00698 ; perimeter
G1 X106.761 Y98.271 E0.01506 ; perimeter
G1 X106.343 Y98.349 E0.01969 ; perimeter
G1 X106.200 Y98.334 E0.00666 ; perimeter
G1 X106.009 Y98.267 E0.00938 ; perimeter
G1 X105.935 Y98.191 E0.00493 ; perimeter
G1 X105.902 Y98.046 E0.00688 ; perimeter
G1 X105.959 Y97.949 F10800.000 ; move inwards before travel
G1 X106.147 Y98.040 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.330669
G1 F2400.000
G1 X106.603 Y97.890 E0.01146 ; infill
G1 X106.795 Y97.802 E0.00507 ; infill
;WIDTH:0.228689
G1 X107.005 Y97.780 E0.00325 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.795 Y97.802 E-0.05559 ; wipe and retract
;WIPE_END
G1 E-2.34441 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X108.615 Y99.053 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.727 Y98.997 E0.00579 ; perimeter
G1 X108.958 Y98.990 E0.01073 ; perimeter
G1 X109.026 Y99.000 E0.00316 ; perimeter
G1 X109.193 Y99.121 E0.00956 ; perimeter
G1 X109.420 Y99.450 E0.01849 ; perimeter
G1 X109.991 Y100.671 E0.06243 ; perimeter
G1 X110.306 Y101.059 E0.02314 ; perimeter
G1 X110.886 Y101.560 E0.03552 ; perimeter
G1 X110.972 Y101.601 E0.00443 ; perimeter
G1 X111.137 Y101.838 E0.01339 ; perimeter
G1 X111.418 Y102.100 E0.01780 ; perimeter
G1 X111.698 Y102.246 E0.01461 ; perimeter
G1 X111.805 Y102.344 E0.00672 ; perimeter
G1 X111.969 Y102.396 E0.00799 ; perimeter
G1 X112.190 Y102.532 E0.01202 ; perimeter
G1 X112.358 Y102.711 E0.01135 ; perimeter
G1 X112.464 Y102.862 E0.00856 ; perimeter
G1 X112.501 Y102.996 E0.00644 ; perimeter
G1 X112.465 Y103.133 E0.00659 ; perimeter
G1 X112.423 Y103.183 E0.00300 ; perimeter
G1 X112.262 Y103.257 E0.00822 ; perimeter
G1 X112.027 Y103.268 E0.01087 ; perimeter
G1 X111.736 Y103.190 E0.01395 ; perimeter
G1 X111.519 Y103.058 E0.01178 ; perimeter
G1 X111.378 Y102.944 E0.00842 ; perimeter
G1 X111.278 Y102.802 E0.00804 ; perimeter
G1 X110.920 Y102.472 E0.02256 ; perimeter
G1 X110.764 Y102.408 E0.00781 ; perimeter
G1 X110.539 Y102.233 E0.01319 ; perimeter
G1 X110.232 Y102.039 E0.01681 ; perimeter
G1 X109.995 Y101.833 E0.01456 ; perimeter
G1 X109.799 Y101.560 E0.01556 ; perimeter
G1 X109.164 Y100.487 E0.05775 ; perimeter
G1 X109.042 Y100.345 E0.00866 ; perimeter
G1 X108.848 Y100.046 E0.01652 ; perimeter
G1 X108.765 Y99.969 E0.00525 ; perimeter
G1 X108.546 Y99.597 E0.02002 ; perimeter
G1 X108.521 Y99.423 E0.00812 ; perimeter
G1 X108.592 Y99.108 E0.01494 ; perimeter
G1 X108.736 Y99.085 F10800.000 ; move inwards before travel
G1 X108.854 Y99.234 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.299002
G1 F2400.000
G1 X108.885 Y99.313 E0.00181 ; infill
;WIDTH:0.32467
G1 X108.916 Y99.392 E0.00199 ; infill
;WIDTH:0.357113
G1 X108.925 Y99.433 E0.00109 ; infill
;WIDTH:0.370381
G1 X108.935 Y99.460 E0.00079 ; infill
;WIDTH:0.387522
G1 X109.088 Y99.709 E0.00835 ; infill
;WIDTH:0.289162
G1 X109.385 Y100.204 E0.01183 ; infill
;WIDTH:0.178115
G1 X109.733 Y100.842 E0.00817 ; infill
;WIDTH:0.218653
G1 X109.890 Y101.068 E0.00403 ; infill
;WIDTH:0.263767
G1 X110.060 Y101.311 E0.00542 ; infill
;WIDTH:0.272477
G1 X110.288 Y101.565 E0.00653 ; infill
G1 X110.469 Y101.721 E0.00456 ; infill
G1 X110.719 Y101.900 E0.00587 ; infill
G1 X110.870 Y102.055 E0.00413 ; infill
;WIDTH:0.174362
G1 X111.095 Y102.218 E0.00304 ; infill
G1 X111.248 Y102.357 E0.00226 ; infill
;WIDTH:0.214462
G1 X111.372 Y102.445 E0.00217 ; infill
;WIDTH:0.256899
G1 X111.548 Y102.581 E0.00395 ; infill
;WIDTH:0.27453
G1 X111.603 Y102.643 E0.00160 ; infill
;WIDTH:0.298293
G1 X111.643 Y102.680 E0.00116 ; infill
;WIDTH:0.30571
G1 X111.652 Y102.687 E0.00025 ; infill
;WIDTH:0.347098
G1 X111.753 Y102.740 E0.00289 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.652 Y102.687 E-0.03011 ; wipe and retract
;WIPE_END
G1 E-2.36989 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X114.095 Y102.920 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.206 Y102.705 E0.01117 ; perimeter
G1 X114.332 Y102.616 E0.00717 ; perimeter
G1 X114.503 Y102.561 E0.00832 ; perimeter
G1 X114.546 Y102.566 E0.00201 ; perimeter
G1 X114.687 Y102.595 E0.00666 ; perimeter
G1 X114.911 Y102.747 E0.01254 ; perimeter
G1 X114.993 Y102.943 E0.00986 ; perimeter
G1 X114.992 Y103.052 E0.00501 ; perimeter
G1 X114.964 Y103.150 E0.00474 ; perimeter
G1 X114.833 Y103.319 E0.00989 ; perimeter
G1 X114.594 Y103.390 E0.01152 ; perimeter
G1 X114.343 Y103.357 E0.01174 ; perimeter
G1 X114.219 Y103.289 E0.00654 ; perimeter
G1 X114.129 Y103.128 E0.00856 ; perimeter
G1 X114.105 Y102.979 E0.00699 ; perimeter
G1 X114.324 Y102.845 F10800.000 ; move inwards before travel
G1 X114.532 Y102.975 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.366735
G1 F2400.000
G1 X114.521 Y102.976 E0.00029 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.532 Y102.975 E-0.00282 ; wipe and retract
;WIPE_END
G1 E-2.39718 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X115.374 Y105.283 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.559 Y105.295 E0.00858 ; perimeter
G1 X115.665 Y105.344 E0.00539 ; perimeter
G1 X115.733 Y105.352 E0.00320 ; perimeter
G1 X115.866 Y105.501 E0.00924 ; perimeter
G1 X115.888 Y105.800 E0.01385 ; perimeter
G1 X115.783 Y106.045 E0.01234 ; perimeter
G1 X115.711 Y106.093 E0.00402 ; perimeter
G1 X115.521 Y106.132 E0.00895 ; perimeter
G1 X115.246 Y106.026 E0.01368 ; perimeter
G1 X115.136 Y105.862 E0.00914 ; perimeter
G1 X115.119 Y105.708 E0.00720 ; perimeter
G1 X115.130 Y105.571 E0.00636 ; perimeter
G1 X115.181 Y105.450 E0.00610 ; perimeter
G1 X115.325 Y105.316 E0.00908 ; perimeter
G1 X115.503 Y105.416 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.559 Y105.295 E-0.06213 ; wipe and retract
G1 X115.665 Y105.344 E-0.03073 ; wipe and retract
G1 X115.733 Y105.352 E-0.01820 ; wipe and retract
G1 X115.866 Y105.501 E-0.05265 ; wipe and retract
G1 X115.888 Y105.800 E-0.07892 ; wipe and retract
G1 X115.783 Y106.045 E-0.07031 ; wipe and retract
G1 X115.711 Y106.093 E-0.02292 ; wipe and retract
G1 X115.521 Y106.132 E-0.05098 ; wipe and retract
G1 X115.246 Y106.026 E-0.07796 ; wipe and retract
G1 X115.136 Y105.862 E-0.05208 ; wipe and retract
G1 X115.119 Y105.708 E-0.04104 ; wipe and retract
G1 X115.130 Y105.571 E-0.03622 ; wipe and retract
G1 X115.181 Y105.450 E-0.03473 ; wipe and retract
G1 X115.325 Y105.316 E-0.05173 ; wipe and retract
;WIPE_END
G1 E-1.71940 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X115.369 Y111.690 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.295 Y111.647 E0.00396 ; perimeter
G1 X115.234 Y111.577 E0.00432 ; perimeter
G1 X115.176 Y111.430 E0.00732 ; perimeter
G1 X115.156 Y111.344 E0.00410 ; perimeter
G1 X115.162 Y111.146 E0.00917 ; perimeter
G1 X115.244 Y110.950 E0.00983 ; perimeter
G1 X115.280 Y110.908 E0.00255 ; perimeter
G1 X115.397 Y110.848 E0.00609 ; perimeter
G1 X115.619 Y110.844 E0.01030 ; perimeter
G1 X115.736 Y110.897 E0.00594 ; perimeter
G1 X115.820 Y110.995 E0.00601 ; perimeter
G1 X115.851 Y111.067 E0.00361 ; perimeter
G1 X115.883 Y111.230 E0.00769 ; perimeter
G1 X115.841 Y111.488 E0.01212 ; perimeter
G1 X115.678 Y111.681 E0.01169 ; perimeter
G1 X115.557 Y111.717 E0.00587 ; perimeter
G1 X115.428 Y111.699 E0.00601 ; perimeter
G1 X115.354 Y111.606 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.295 Y111.647 E-0.03767 ; wipe and retract
G1 X115.234 Y111.577 E-0.02459 ; wipe and retract
G1 X115.176 Y111.430 E-0.04171 ; wipe and retract
G1 X115.156 Y111.344 E-0.02333 ; wipe and retract
G1 X115.162 Y111.146 E-0.05224 ; wipe and retract
G1 X115.244 Y110.950 E-0.05600 ; wipe and retract
G1 X115.280 Y110.908 E-0.01452 ; wipe and retract
G1 X115.397 Y110.848 E-0.03468 ; wipe and retract
G1 X115.619 Y110.844 E-0.05867 ; wipe and retract
G1 X115.736 Y110.897 E-0.03381 ; wipe and retract
G1 X115.820 Y110.995 E-0.03426 ; wipe and retract
G1 X115.851 Y111.067 E-0.02056 ; wipe and retract
G1 X115.883 Y111.230 E-0.04382 ; wipe and retract
G1 X115.841 Y111.488 E-0.06904 ; wipe and retract
G1 X115.678 Y111.681 E-0.06662 ; wipe and retract
G1 X115.557 Y111.717 E-0.03343 ; wipe and retract
G1 X115.428 Y111.699 E-0.03424 ; wipe and retract
;WIPE_END
G1 E-1.72081 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X115.463 Y114.778 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.534 Y114.843 E0.00447 ; perimeter
G1 X115.591 Y114.932 E0.00488 ; perimeter
G1 X115.626 Y115.064 E0.00633 ; perimeter
G1 X115.626 Y115.210 E0.00675 ; perimeter
G1 X115.597 Y115.320 E0.00529 ; perimeter
G1 X115.552 Y115.393 E0.00397 ; perimeter
G1 X115.299 Y115.634 E0.01621 ; perimeter
G1 X114.927 Y115.892 E0.02096 ; perimeter
G1 X114.676 Y115.961 E0.01203 ; perimeter
G1 X114.616 Y115.998 E0.00326 ; perimeter
G1 X114.371 Y116.039 E0.01153 ; perimeter
G1 X114.072 Y116.044 E0.01383 ; perimeter
G1 X113.942 Y116.010 E0.00623 ; perimeter
G1 X113.712 Y115.876 E0.01232 ; perimeter
G1 X113.582 Y115.730 E0.00909 ; perimeter
G1 X113.590 Y115.594 E0.00630 ; perimeter
G1 X113.717 Y115.405 E0.01053 ; perimeter
G1 X113.843 Y115.310 E0.00732 ; perimeter
G1 X114.060 Y115.248 E0.01045 ; perimeter
G1 X114.220 Y115.177 E0.00811 ; perimeter
G1 X114.467 Y115.129 E0.01169 ; perimeter
G1 X114.723 Y114.952 E0.01439 ; perimeter
G1 X115.082 Y114.754 E0.01899 ; perimeter
G1 X115.369 Y114.743 E0.01331 ; perimeter
G1 X115.407 Y114.757 E0.00187 ; perimeter
G1 X115.464 Y114.875 F10800.000 ; move inwards before travel
G1 X113.930 Y115.724 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.383053
G1 F2400.000
G1 X114.672 Y115.513 E0.02181 ; infill
G1 X115.221 Y115.149 E0.01864 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.672 Y115.513 E-0.17390 ; wipe and retract
G1 X113.930 Y115.724 E-0.20351 ; wipe and retract
;WIPE_END
G1 E-2.02259 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 X112.346 Y115.955 ; move to first perimeter point
G1 Z11.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.201 Y116.075 E0.00871 ; perimeter
G1 X112.035 Y116.129 E0.00811 ; perimeter
G1 X111.888 Y116.133 E0.00677 ; perimeter
G1 X111.748 Y116.105 E0.00664 ; perimeter
G1 X111.658 Y116.060 E0.00465 ; perimeter
G1 X111.575 Y115.950 E0.00640 ; perimeter
G1 X111.534 Y115.786 E0.00785 ; perimeter
G1 X111.552 Y115.644 E0.00660 ; perimeter
G1 X111.623 Y115.502 E0.00736 ; perimeter
G1 X111.752 Y115.426 E0.00694 ; perimeter
G1 X111.830 Y115.407 E0.00371 ; perimeter
G1 X112.024 Y115.404 E0.00903 ; perimeter
G1 X112.190 Y115.450 E0.00794 ; perimeter
G1 X112.308 Y115.521 E0.00639 ; perimeter
G1 X112.375 Y115.623 E0.00565 ; perimeter
G1 X112.405 Y115.733 E0.00527 ; perimeter
G1 X112.361 Y115.897 E0.00785 ; perimeter
G1 X112.158 Y115.938 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:11.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;11.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.201 Y116.075 E-0.06319 ; wipe and retract
G1 X112.035 Y116.129 E-0.04620 ; wipe and retract
G1 X111.888 Y116.133 E-0.03859 ; wipe and retract
G1 X111.748 Y116.105 E-0.03783 ; wipe and retract
G1 X111.658 Y116.060 E-0.02649 ; wipe and retract
G1 X111.575 Y115.950 E-0.03648 ; wipe and retract
G1 X111.534 Y115.786 E-0.04469 ; wipe and retract
G1 X111.552 Y115.644 E-0.03759 ; wipe and retract
G1 X111.623 Y115.502 E-0.04191 ; wipe and retract
G1 X111.752 Y115.426 E-0.03951 ; wipe and retract
G1 X111.830 Y115.407 E-0.02113 ; wipe and retract
G1 X112.024 Y115.404 E-0.05144 ; wipe and retract
G1 X112.190 Y115.450 E-0.04522 ; wipe and retract
G1 X112.308 Y115.521 E-0.03640 ; wipe and retract
G1 X112.375 Y115.623 E-0.03220 ; wipe and retract
G1 X112.405 Y115.733 E-0.03003 ; wipe and retract
G1 X112.361 Y115.897 E-0.04473 ; wipe and retract
;WIPE_END
G1 E-1.72638 F2400.000 ; retract
G1 Z11.275 F10800.000 ; lift Z
G1 Z11.400 ; move to next layer (56)
;AFTER_LAYER_CHANGE
;11.4
G1 Z11.475 ; lift Z
G1 X104.080 Y107.122 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.751 Y107.221 E0.01162 ; perimeter
G1 X103.631 Y107.230 E0.00407 ; perimeter
G1 X103.620 Y107.111 E0.00405 ; perimeter
G1 X103.513 Y106.956 E0.00636 ; perimeter
G1 X103.560 Y106.992 E0.00199 ; perimeter
G1 X104.022 Y107.108 E0.01612 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.751 Y107.221 E-0.07740 ; wipe and retract
G1 X103.631 Y107.230 E-0.03176 ; wipe and retract
G1 X103.620 Y107.111 E-0.03160 ; wipe and retract
G1 X103.513 Y106.956 E-0.04958 ; wipe and retract
G1 X103.560 Y106.992 E-0.01548 ; wipe and retract
G1 X104.022 Y107.108 E-0.12565 ; wipe and retract
;WIPE_END
G1 E-2.06853 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X102.258 Y105.770 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.738 Y105.313 E0.03207 ; perimeter
G1 X101.593 Y105.066 E0.01331 ; perimeter
G1 X101.606 Y104.849 E0.01005 ; perimeter
G1 X101.777 Y104.646 E0.01229 ; perimeter
G1 X101.846 Y104.613 E0.00355 ; perimeter
G1 X102.105 Y104.625 E0.01201 ; perimeter
G1 X102.263 Y104.682 E0.00778 ; perimeter
G1 X102.381 Y104.810 E0.00808 ; perimeter
G1 X102.453 Y104.946 E0.00712 ; perimeter
G1 X102.531 Y105.355 E0.01928 ; perimeter
G1 X102.758 Y105.705 E0.01929 ; perimeter
G1 X102.949 Y105.799 E0.00989 ; perimeter
G1 X103.241 Y106.012 E0.01673 ; perimeter
G1 X103.540 Y106.366 E0.02150 ; perimeter
G1 X103.775 Y106.549 E0.01379 ; perimeter
G1 X104.433 Y106.714 E0.03143 ; perimeter
G1 X104.736 Y106.719 E0.01399 ; perimeter
G1 X105.139 Y106.811 E0.01920 ; perimeter
G1 X105.341 Y106.896 E0.01012 ; perimeter
G1 X105.587 Y107.091 E0.01452 ; perimeter
G1 X105.758 Y107.383 E0.01572 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.798 Y107.451 E0.00327 ; perimeter (bridge)
G1 X105.746 Y107.449 E0.00219 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.526 Y107.443 E0.01021 ; perimeter
G1 X105.328 Y107.527 E0.00993 ; perimeter
G1 X104.779 Y107.532 E0.02543 ; perimeter
G1 X104.489 Y107.591 E0.01374 ; perimeter
G1 X104.177 Y107.596 E0.01443 ; perimeter
G1 X103.840 Y107.697 E0.01633 ; perimeter
G1 X103.675 Y107.710 E0.00766 ; perimeter
G1 X103.299 Y108.001 E0.02203 ; perimeter
G1 X103.181 Y107.614 E0.01876 ; perimeter
G1 X103.151 Y107.280 E0.01551 ; perimeter
G1 X102.865 Y106.867 E0.02328 ; perimeter
G1 X102.616 Y106.713 E0.01356 ; perimeter
G1 X102.560 Y106.648 E0.00398 ; perimeter
G1 X102.419 Y106.383 E0.01391 ; perimeter
G1 X102.274 Y105.828 E0.02656 ; perimeter
G1 X102.403 Y105.397 F10800.000 ; move inwards before travel
G1 X102.623 Y105.907 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.445731
G1 F2400.000
G1 X102.934 Y106.366 E0.01859 ; infill
G1 X103.130 Y106.534 E0.00863 ; infill
;WIDTH:0.346502
G1 X103.226 Y106.648 E0.00375 ; infill
G1 X103.486 Y106.650 E0.00656 ; infill
G1 X104.322 Y107.158 F10800.000 ; move to first infill point
;WIDTH:0.327299
G1 F2400.000
G1 X104.730 Y107.131 E0.00968 ; infill
G1 X105.331 Y107.196 E0.01428 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.730 Y107.131 E-0.15937 ; wipe and retract
G1 X104.322 Y107.158 E-0.10806 ; wipe and retract
;WIPE_END
G1 E-2.13257 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X106.373 Y109.101 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X106.392 Y109.096 E0.00068 ; perimeter
G1 X106.553 Y109.542 E0.01603 ; perimeter
G1 X106.324 Y109.329 E0.01059 ; perimeter
G1 X106.016 Y109.346 E0.01041 ; perimeter
G1 X106.323 Y109.135 E0.01262 ; perimeter
G1 X106.146 Y109.822 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.940 Y109.834 E0.00956 ; perimeter
G1 X105.814 Y109.790 E0.00620 ; perimeter
G1 X105.220 Y109.855 E0.02768 ; perimeter
G1 X104.968 Y109.760 E0.01244 ; perimeter
G1 X104.863 Y109.596 E0.00903 ; perimeter
G1 X104.988 Y109.385 E0.01135 ; perimeter
G1 X105.246 Y109.245 E0.01359 ; perimeter
G1 X105.305 Y109.182 E0.00399 ; perimeter
G1 X105.616 Y109.039 E0.01588 ; perimeter
G1 X105.701 Y108.944 E0.00586 ; perimeter
G1 X105.785 Y108.920 E0.00408 ; perimeter
G1 X106.176 Y108.650 E0.02199 ; perimeter
G1 X106.334 Y108.615 E0.00747 ; perimeter
G1 X106.467 Y108.525 E0.00747 ; perimeter
G1 X106.639 Y108.575 E0.00830 ; perimeter
G1 X106.766 Y108.742 E0.00971 ; perimeter
G1 X106.809 Y108.830 E0.00456 ; perimeter
G1 X107.590 Y110.993 E0.10649 ; perimeter
G1 X107.794 Y111.609 E0.03009 ; perimeter
G1 X107.788 Y112.026 E0.01930 ; perimeter
G1 X107.742 Y112.130 E0.00527 ; perimeter
G1 X107.673 Y112.153 E0.00337 ; perimeter
G1 X107.438 Y112.371 E0.01486 ; perimeter
G1 X107.313 Y112.416 E0.00612 ; perimeter
G1 X107.167 Y112.545 E0.00906 ; perimeter
G1 X106.975 Y112.648 E0.01008 ; perimeter
G1 X106.683 Y112.711 E0.01383 ; perimeter
G1 X106.566 Y112.677 E0.00567 ; perimeter
G1 X106.533 Y112.629 E0.00269 ; perimeter
G1 X106.522 Y112.487 E0.00661 ; perimeter
G1 X106.583 Y112.213 E0.01302 ; perimeter
G1 X106.771 Y111.874 E0.01790 ; perimeter
G1 X106.791 Y111.776 E0.00464 ; perimeter
G1 X106.883 Y111.635 E0.00784 ; perimeter
G1 X106.978 Y111.369 E0.01305 ; perimeter
G1 X106.893 Y110.911 E0.02157 ; perimeter
G1 X106.759 Y110.453 E0.02210 ; perimeter
G1 X106.464 Y110.027 E0.02401 ; perimeter
G1 X106.321 Y109.983 E0.00692 ; perimeter
G1 X106.190 Y109.863 E0.00823 ; perimeter
G1 X106.072 Y109.629 F10800.000 ; move inwards before travel
G1 X106.720 Y109.720 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.252438
G1 F2400.000
G1 X106.925 Y110.117 E0.00778 ; infill
;WIDTH:0.159248
G1 X107.034 Y110.332 E0.00234 ; infill
;WIDTH:0.190482
G1 X107.201 Y110.842 E0.00658 ; infill
;WIDTH:0.234962
G1 X107.271 Y111.103 E0.00431 ; infill
;WIDTH:0.272548
G1 X107.339 Y111.368 E0.00523 ; infill
;WIDTH:0.298238
G1 X107.420 Y112.059 E0.01477 ; infill
G1 X106.803 Y112.438 F10800.000 ; move to first infill point
;WIDTH:0.208649
G1 F2400.000
G1 X106.889 Y112.329 E0.00192 ; infill
;WIDTH:0.240595
G1 X106.928 Y112.292 E0.00088 ; infill
;WIDTH:0.2637
G1 X106.959 Y112.260 E0.00081 ; infill
;WIDTH:0.299863
G1 X107.025 Y112.177 E0.00226 ; infill
;WIDTH:0.336026
G1 X107.092 Y112.095 E0.00258 ; infill
;WIDTH:0.3677
G1 X107.133 Y112.052 E0.00162 ; infill
;WIDTH:0.379723
G1 X107.146 Y112.041 E0.00048 ; infill
;WIDTH:0.405094
G1 X107.168 Y112.020 E0.00090 ; infill
;WIDTH:0.430466
G1 X107.189 Y111.998 E0.00096 ; infill
;WIDTH:0.450194
G1 X107.202 Y111.983 E0.00068 ; infill
;WIDTH:0.471153
G1 X107.219 Y111.953 E0.00122 ; infill
;WIDTH:0.505024
G1 X107.315 Y111.837 E0.00581 ; infill
G1 X107.421 Y111.249 E0.02295 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.315 Y111.837 E-0.15762 ; wipe and retract
G1 X107.219 Y111.953 E-0.03992 ; wipe and retract
;WIPE_END
G1 E-2.20246 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X105.188 Y109.585 ; move to first infill point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.167024
G1 F2400.000
G1 X105.310 Y109.547 E0.00132 ; infill
;WIDTH:0.202828
G1 X105.433 Y109.509 E0.00171 ; infill
;WIDTH:0.217745
G1 X105.770 Y109.372 E0.00529 ; infill
G1 X105.779 Y109.398 F10800.000 ; move to first infill point
;WIDTH:0.306403
G1 F2400.000
G1 X105.151 Y109.572 E0.01427 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.779 Y109.398 E-0.17192 ; wipe and retract
;WIPE_END
G1 E-2.22808 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X111.584 Y115.509 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.739 Y115.416 E0.00835 ; perimeter
G1 X112.002 Y115.407 E0.01223 ; perimeter
G1 X112.163 Y115.456 E0.00778 ; perimeter
G1 X112.241 Y115.513 E0.00445 ; perimeter
G1 X112.301 Y115.608 E0.00523 ; perimeter
G1 X112.326 Y115.793 E0.00867 ; perimeter
G1 X112.288 Y115.947 E0.00733 ; perimeter
G1 X112.256 Y116.001 E0.00291 ; perimeter
G1 X112.168 Y116.075 E0.00531 ; perimeter
G1 X112.011 Y116.130 E0.00773 ; perimeter
G1 X111.730 Y116.107 E0.01307 ; perimeter
G1 X111.614 Y116.051 E0.00594 ; perimeter
G1 X111.523 Y115.900 E0.00820 ; perimeter
G1 X111.501 Y115.798 E0.00481 ; perimeter
G1 X111.522 Y115.640 E0.00742 ; perimeter
G1 X111.558 Y115.563 E0.00394 ; perimeter
G1 X111.758 Y115.554 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.739 Y115.416 E-0.06140 ; wipe and retract
G1 X112.002 Y115.407 E-0.06967 ; wipe and retract
G1 X112.163 Y115.456 E-0.04432 ; wipe and retract
G1 X112.241 Y115.513 E-0.02534 ; wipe and retract
G1 X112.301 Y115.608 E-0.02977 ; wipe and retract
G1 X112.326 Y115.793 E-0.04940 ; wipe and retract
G1 X112.288 Y115.947 E-0.04174 ; wipe and retract
G1 X112.256 Y116.001 E-0.01658 ; wipe and retract
G1 X112.168 Y116.075 E-0.03028 ; wipe and retract
G1 X112.011 Y116.130 E-0.04404 ; wipe and retract
G1 X111.730 Y116.107 E-0.07448 ; wipe and retract
G1 X111.614 Y116.051 E-0.03382 ; wipe and retract
G1 X111.523 Y115.900 E-0.04671 ; wipe and retract
G1 X111.501 Y115.798 E-0.02738 ; wipe and retract
G1 X111.522 Y115.640 E-0.04227 ; wipe and retract
G1 X111.558 Y115.563 E-0.02243 ; wipe and retract
;WIPE_END
G1 E-1.74038 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X113.783 Y115.680 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.841 Y115.475 E0.00989 ; perimeter
G1 X114.066 Y115.275 E0.01395 ; perimeter
G1 X114.306 Y115.168 E0.01217 ; perimeter
G1 X114.463 Y115.138 E0.00741 ; perimeter
G1 X114.806 Y114.901 E0.01930 ; perimeter
G1 X115.134 Y114.734 E0.01707 ; perimeter
G1 X115.323 Y114.722 E0.00878 ; perimeter
G1 X115.475 Y114.766 E0.00732 ; perimeter
G1 X115.544 Y114.830 E0.00436 ; perimeter
G1 X115.604 Y114.927 E0.00527 ; perimeter
G1 X115.636 Y115.056 E0.00614 ; perimeter
G1 X115.634 Y115.207 E0.00700 ; perimeter
G1 X115.607 Y115.307 E0.00480 ; perimeter
G1 X115.558 Y115.386 E0.00431 ; perimeter
G1 X115.342 Y115.591 E0.01382 ; perimeter
G1 X114.911 Y115.903 E0.02464 ; perimeter
G1 X114.730 Y115.953 E0.00870 ; perimeter
G1 X114.636 Y116.012 E0.00514 ; perimeter
G1 X114.246 Y116.030 E0.01805 ; perimeter
G1 X114.103 Y116.002 E0.00678 ; perimeter
G1 X113.875 Y115.852 E0.01263 ; perimeter
G1 X113.795 Y115.739 E0.00639 ; perimeter
G1 X113.959 Y115.559 F10800.000 ; move inwards before travel
G1 X114.038 Y115.639 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.294525
G1 F2400.000
G1 X114.948 Y115.579 E0.01908 ; infill
G1 X115.230 Y115.139 F10800.000 ; move to first infill point
;WIDTH:0.399454
G1 F2400.000
G1 X114.716 Y115.499 E0.01861 ; infill
G1 X114.500 Y115.578 E0.00683 ; infill
G1 X114.288 Y115.621 E0.00640 ; infill
;WIDTH:0.374217
G1 X114.277 Y115.625 E0.00033 ; infill
;WIDTH:0.366249
G1 X114.227 Y115.780 E0.00438 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.277 Y115.625 E-0.04304 ; wipe and retract
;WIPE_END
G1 E-2.35696 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X115.394 Y111.772 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.276 Y111.694 E0.00654 ; perimeter
G1 X115.217 Y111.614 E0.00460 ; perimeter
G1 X115.157 Y111.405 E0.01008 ; perimeter
G1 X115.165 Y111.202 E0.00942 ; perimeter
G1 X115.229 Y111.044 E0.00791 ; perimeter
G1 X115.284 Y110.980 E0.00392 ; perimeter
G1 X115.409 Y110.918 E0.00644 ; perimeter
G1 X115.597 Y110.910 E0.00873 ; perimeter
G1 X115.696 Y110.944 E0.00487 ; perimeter
G1 X115.844 Y111.120 E0.01064 ; perimeter
G1 X115.878 Y111.246 E0.00605 ; perimeter
G1 X115.848 Y111.547 E0.01402 ; perimeter
G1 X115.803 Y111.644 E0.00498 ; perimeter
G1 X115.678 Y111.755 E0.00774 ; perimeter
G1 X115.549 Y111.792 E0.00623 ; perimeter
G1 X115.454 Y111.780 E0.00446 ; perimeter
G1 X115.373 Y111.633 F10800.000 ; move inwards before travel
G1 X115.517 Y111.283 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.234507
G1 F2400.000
G1 X115.520 Y111.450 E0.00265 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.517 Y111.283 E-0.04387 ; wipe and retract
;WIPE_END
G1 E-2.35613 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X115.508 Y106.110 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.251 Y106.003 E0.01291 ; perimeter
G1 X115.137 Y105.834 E0.00943 ; perimeter
G1 X115.121 Y105.677 E0.00732 ; perimeter
G1 X115.130 Y105.575 E0.00474 ; perimeter
G1 X115.191 Y105.441 E0.00681 ; perimeter
G1 X115.259 Y105.352 E0.00520 ; perimeter
G1 X115.376 Y105.288 E0.00619 ; perimeter
G1 X115.530 Y105.263 E0.00720 ; perimeter
G1 X115.734 Y105.351 E0.01031 ; perimeter
G1 X115.865 Y105.517 E0.00976 ; perimeter
G1 X115.890 Y105.770 E0.01181 ; perimeter
G1 X115.786 Y106.016 E0.01237 ; perimeter
G1 X115.711 Y106.067 E0.00420 ; perimeter
G1 X115.567 Y106.098 E0.00683 ; perimeter
G1 X115.407 Y105.850 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.251 Y106.003 E-0.08703 ; wipe and retract
G1 X115.137 Y105.834 E-0.05373 ; wipe and retract
G1 X115.121 Y105.677 E-0.04172 ; wipe and retract
G1 X115.130 Y105.575 E-0.02698 ; wipe and retract
G1 X115.191 Y105.441 E-0.03880 ; wipe and retract
G1 X115.259 Y105.352 E-0.02961 ; wipe and retract
G1 X115.376 Y105.288 E-0.03524 ; wipe and retract
G1 X115.530 Y105.263 E-0.04103 ; wipe and retract
G1 X115.734 Y105.351 E-0.05872 ; wipe and retract
G1 X115.865 Y105.517 E-0.05560 ; wipe and retract
G1 X115.890 Y105.770 E-0.06727 ; wipe and retract
G1 X115.786 Y106.016 E-0.07044 ; wipe and retract
G1 X115.711 Y106.067 E-0.02392 ; wipe and retract
G1 X115.567 Y106.098 E-0.03891 ; wipe and retract
;WIPE_END
G1 E-1.73099 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X114.635 Y103.364 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.546 Y103.394 E0.00436 ; perimeter
G1 X114.306 Y103.374 E0.01115 ; perimeter
G1 X114.166 Y103.302 E0.00730 ; perimeter
G1 X114.052 Y103.137 E0.00928 ; perimeter
G1 X114.036 Y102.987 E0.00699 ; perimeter
G1 X114.152 Y102.751 E0.01220 ; perimeter
G1 X114.267 Y102.659 E0.00683 ; perimeter
G1 X114.471 Y102.586 E0.01000 ; perimeter
G1 X114.588 Y102.601 E0.00547 ; perimeter
G1 X114.655 Y102.621 E0.00324 ; perimeter
G1 X114.777 Y102.695 E0.00663 ; perimeter
G1 X114.864 Y102.774 E0.00542 ; perimeter
G1 X114.918 Y102.895 E0.00613 ; perimeter
G1 X114.928 Y103.064 E0.00785 ; perimeter
G1 X114.893 Y103.176 E0.00541 ; perimeter
G1 X114.764 Y103.320 E0.00897 ; perimeter
G1 X114.692 Y103.345 E0.00351 ; perimeter
G1 X114.558 Y103.309 F10800.000 ; move inwards before travel
G1 X114.460 Y103.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3485
G1 F2400.000
G1 X114.547 Y102.996 E0.00221 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.460 Y103.000 E-0.02292 ; wipe and retract
;WIPE_END
G1 E-2.37708 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X112.455 Y103.352 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.155 Y103.356 E0.01392 ; perimeter
G1 X111.853 Y103.270 E0.01455 ; perimeter
G1 X111.567 Y103.069 E0.01619 ; perimeter
G1 X111.333 Y102.740 E0.01869 ; perimeter
G1 X111.272 Y102.575 E0.00813 ; perimeter
G1 X110.966 Y102.325 E0.01834 ; perimeter
G1 X110.527 Y102.168 E0.02158 ; perimeter
G1 X110.277 Y102.023 E0.01341 ; perimeter
G1 X109.964 Y101.809 E0.01754 ; perimeter
G1 X109.759 Y101.594 E0.01378 ; perimeter
G1 X109.476 Y101.134 E0.02503 ; perimeter
G1 X109.105 Y100.464 E0.03546 ; perimeter
G1 X108.824 Y100.047 E0.02332 ; perimeter
G1 X108.492 Y99.473 E0.03069 ; perimeter
G1 X108.466 Y99.254 E0.01022 ; perimeter
G1 X108.574 Y98.937 E0.01550 ; perimeter
G1 X108.618 Y98.901 E0.00264 ; perimeter
G1 X108.856 Y98.881 E0.01107 ; perimeter
G1 X109.049 Y98.954 E0.00956 ; perimeter
G1 X109.183 Y99.067 E0.00813 ; perimeter
G1 X109.359 Y99.322 E0.01436 ; perimeter
G1 X109.713 Y100.032 E0.03672 ; perimeter
G1 X110.028 Y100.572 E0.02895 ; perimeter
G1 X110.392 Y101.090 E0.02936 ; perimeter
G1 X110.754 Y101.445 E0.02348 ; perimeter
G1 X110.788 Y101.523 E0.00393 ; perimeter
G1 X110.999 Y101.826 E0.01709 ; perimeter
G1 X111.035 Y101.945 E0.00580 ; perimeter
G1 X111.152 Y102.119 E0.00968 ; perimeter
G1 X111.536 Y102.339 E0.02049 ; perimeter
G1 X111.745 Y102.356 E0.00972 ; perimeter
G1 X112.100 Y102.470 E0.01730 ; perimeter
G1 X112.279 Y102.567 E0.00943 ; perimeter
G1 X112.466 Y102.715 E0.01104 ; perimeter
G1 X112.571 Y102.855 E0.00813 ; perimeter
G1 X112.701 Y102.957 E0.00765 ; perimeter
G1 X112.715 Y103.163 E0.00955 ; perimeter
G1 X112.625 Y103.268 E0.00641 ; perimeter
G1 X112.509 Y103.325 E0.00600 ; perimeter
G1 X112.252 Y103.130 F10800.000 ; move inwards before travel
G1 X112.390 Y103.112 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318112
G1 F2400.000
G1 X111.630 Y102.589 E0.02111 ; infill
G1 X111.664 Y102.591 F10800.000 ; move to first infill point
;WIDTH:0.168092
G1 F2400.000
G1 X111.644 Y102.652 E0.00067 ; infill
;WIDTH:0.177532
G1 X112.213 Y103.114 E0.00821 ; infill
G1 X111.645 Y102.763 F10800.000 ; move to first infill point
;WIDTH:0.140534
G1 F2400.000
G1 X112.443 Y103.089 E0.00700 ; infill
G1 X112.458 Y103.073 F10800.000 ; move to first infill point
;WIDTH:0.363835
G1 F2400.000
G1 X112.031 Y102.897 E0.01233 ; infill
G1 X111.577 Y102.667 E0.01357 ; infill
G1 X110.790 Y102.006 F10800.000 ; move to first infill point
;WIDTH:0.294592
G1 F2400.000
G1 X110.080 Y101.347 E0.02029 ; infill
G1 X109.713 Y100.781 E0.01413 ; infill
G1 X109.163 Y99.831 E0.02295 ; infill
;WIDTH:0.389896
G1 X108.908 Y99.388 E0.01476 ; infill
;WIDTH:0.378523
G1 X108.881 Y99.341 E0.00151 ; infill
;WIDTH:0.369399
G1 X108.873 Y99.327 E0.00044 ; infill
;WIDTH:0.358048
G1 X108.853 Y99.288 E0.00117 ; infill
;WIDTH:0.324104
G1 X108.848 Y99.281 E0.00018 ; infill
;WIDTH:0.315713
G1 X108.768 Y99.130 E0.00388 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.848 Y99.281 E-0.04517 ; wipe and retract
;WIPE_END
G1 E-2.35483 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X106.099 Y97.954 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.131 Y97.809 E0.00691 ; perimeter
G1 X106.305 Y97.606 E0.01237 ; perimeter
G1 X106.520 Y97.468 E0.01186 ; perimeter
G1 X106.666 Y97.412 E0.00721 ; perimeter
G1 X106.940 Y97.363 E0.01293 ; perimeter
G1 X107.263 Y97.452 E0.01550 ; perimeter
G1 X107.390 Y97.567 E0.00796 ; perimeter
G1 X107.491 Y97.769 E0.01047 ; perimeter
G1 X107.479 Y97.930 E0.00747 ; perimeter
G1 X107.308 Y98.098 E0.01110 ; perimeter
G1 X107.080 Y98.204 E0.01164 ; perimeter
G1 X106.660 Y98.266 E0.01969 ; perimeter
G1 X106.340 Y98.248 E0.01485 ; perimeter
G1 X106.157 Y98.162 E0.00936 ; perimeter
G1 X106.115 Y98.012 E0.00722 ; perimeter
G1 X106.221 Y97.869 F10800.000 ; move inwards before travel
G1 X106.348 Y97.943 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35268
G1 F2400.000
G1 X106.642 Y97.871 E0.00779 ; infill
G1 X107.137 Y97.670 E0.01377 ; infill
G1 X107.230 Y97.785 F10800.000 ; move to first infill point
;WIDTH:0.386278
G1 F2400.000
G1 X106.780 Y97.821 E0.01289 ; infill
G1 X106.350 Y97.933 E0.01268 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.780 Y97.821 E-0.11720 ; wipe and retract
G1 X107.230 Y97.785 E-0.11910 ; wipe and retract
;WIPE_END
G1 E-2.16370 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X100.596 Y101.941 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.542 Y101.950 E0.00187 ; perimeter
G1 X100.470 Y101.855 E0.00403 ; perimeter
G1 X100.547 Y101.907 E0.00313 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.542 Y101.950 E-0.01145 ; wipe and retract
G1 X100.470 Y101.855 E-0.03145 ; wipe and retract
G1 X100.547 Y101.907 E-0.02440 ; wipe and retract
;WIPE_END
G1 E-2.33269 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X99.565 Y96.541 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.608 Y96.345 E0.00679 ; perimeter
G1 X99.692 Y96.338 E0.00286 ; perimeter
G1 X99.792 Y96.391 E0.00383 ; perimeter
G1 X99.878 Y96.405 E0.00293 ; perimeter
G1 X99.614 Y96.505 E0.00956 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.608 Y96.345 E-0.04246 ; wipe and retract
G1 X99.692 Y96.338 E-0.02227 ; wipe and retract
G1 X99.792 Y96.391 E-0.02987 ; wipe and retract
G1 X99.878 Y96.405 E-0.02288 ; wipe and retract
G1 X99.614 Y96.505 E-0.07456 ; wipe and retract
;WIPE_END
G1 E-2.20795 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 X101.982 Y95.750 ; move to first perimeter point
G1 Z11.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.096 Y95.645 E0.00523 ; perimeter
G1 X102.231 Y95.736 E0.00551 ; perimeter
G1 X102.042 Y95.745 E0.00640 ; perimeter
G1 X101.174 Y96.009 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.266 Y95.843 E0.00882 ; perimeter
G1 X101.473 Y95.623 E0.01396 ; perimeter
G1 X101.579 Y95.465 E0.00885 ; perimeter
G1 X101.725 Y95.332 E0.00913 ; perimeter
G1 X101.756 Y95.239 E0.00453 ; perimeter
G1 X101.795 Y95.207 E0.00234 ; perimeter
G1 X101.945 Y95.160 E0.00726 ; perimeter
G1 X102.190 Y95.161 E0.01136 ; perimeter
G1 X102.254 Y95.181 E0.00308 ; perimeter
G1 X102.499 Y95.318 E0.01302 ; perimeter
G1 X102.551 Y95.373 E0.00352 ; perimeter
G1 X103.135 Y95.665 E0.03021 ; perimeter
G1 X103.443 Y95.702 E0.01438 ; perimeter
G1 X103.892 Y95.624 E0.02114 ; perimeter
G1 X103.951 Y95.582 E0.00335 ; perimeter
G1 X104.236 Y95.516 E0.01352 ; perimeter
G1 X104.561 Y95.573 E0.01529 ; perimeter
G1 X104.650 Y95.670 E0.00612 ; perimeter
G1 X104.701 Y95.932 E0.01237 ; perimeter
G1 X104.602 Y96.235 E0.01475 ; perimeter
G1 X104.381 Y96.421 E0.01337 ; perimeter
G1 X104.353 Y96.466 E0.00248 ; perimeter
G1 X104.088 Y96.539 E0.01272 ; perimeter
G1 X103.343 Y96.358 E0.03554 ; perimeter
G1 X102.574 Y96.204 E0.03631 ; perimeter
G1 X102.054 Y96.227 E0.02412 ; perimeter
G1 X101.679 Y96.272 E0.01750 ; perimeter
G1 X101.326 Y96.452 E0.01836 ; perimeter
G1 X101.095 Y96.481 E0.01077 ; perimeter
G1 X100.935 Y96.582 E0.00874 ; perimeter
G1 X100.656 Y96.671 E0.01359 ; perimeter
G1 X100.381 Y96.676 E0.01271 ; perimeter
G1 X100.003 Y96.887 E0.02009 ; perimeter
G1 X99.858 Y96.923 E0.00691 ; perimeter
G1 X99.675 Y97.056 E0.01047 ; perimeter
G1 X99.510 Y97.294 E0.01343 ; perimeter
G1 X99.388 Y97.751 E0.02189 ; perimeter
G1 X99.360 Y97.993 E0.01128 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.336 Y98.197 E0.00861 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.325 Y98.291 E0.00438 ; perimeter
G1 X99.402 Y98.421 E0.00697 ; perimeter
G1 X99.402 Y98.651 E0.01066 ; perimeter
G1 X99.699 Y99.144 E0.02667 ; perimeter
G1 X99.760 Y99.178 E0.00322 ; perimeter
G1 X99.822 Y99.260 E0.00478 ; perimeter
G1 X99.956 Y99.551 E0.01484 ; perimeter
G1 X100.011 Y99.605 E0.00357 ; perimeter
G1 X100.061 Y99.720 E0.00580 ; perimeter
G1 X100.159 Y100.031 E0.01509 ; perimeter
G1 X100.149 Y100.247 E0.01003 ; perimeter
G1 X100.191 Y100.653 E0.01891 ; perimeter
G1 X100.242 Y100.772 E0.00602 ; perimeter
G1 X100.260 Y100.929 E0.00729 ; perimeter
G1 X100.534 Y101.315 E0.02192 ; perimeter
G1 X101.080 Y101.669 E0.03017 ; perimeter
G1 X101.164 Y101.859 E0.00962 ; perimeter
G1 X101.163 Y101.980 E0.00558 ; perimeter
G1 X101.120 Y102.109 E0.00632 ; perimeter
G1 X101.048 Y102.213 E0.00587 ; perimeter
G1 X100.787 Y102.419 E0.01542 ; perimeter
G1 X100.674 Y102.418 E0.00524 ; perimeter
G1 X100.495 Y102.462 E0.00850 ; perimeter
G1 X100.443 Y102.459 E0.00244 ; perimeter
G1 X100.209 Y102.310 E0.01284 ; perimeter
G1 X100.069 Y102.123 E0.01080 ; perimeter
G1 X99.968 Y101.951 E0.00928 ; perimeter
G1 X99.592 Y101.164 E0.04037 ; perimeter
G1 X99.162 Y100.015 E0.05682 ; perimeter
G1 X98.978 Y99.198 E0.03882 ; perimeter
G1 X98.974 Y98.154 E0.04837 ; perimeter
G1 X98.997 Y97.577 E0.02671 ; perimeter
G1 X99.061 Y96.935 E0.02991 ; perimeter
G1 X99.089 Y96.400 E0.02479 ; perimeter
G1 X99.200 Y96.020 E0.01834 ; perimeter
G1 X99.305 Y95.924 E0.00657 ; perimeter
G1 X99.596 Y95.850 E0.01394 ; perimeter
G1 X99.676 Y95.853 E0.00369 ; perimeter
G1 X99.829 Y95.865 E0.00714 ; perimeter
G1 X99.948 Y95.928 E0.00620 ; perimeter
G1 X100.240 Y95.976 E0.01374 ; perimeter
G1 X100.335 Y96.020 E0.00485 ; perimeter
G1 X100.752 Y96.093 E0.01962 ; perimeter
G1 X101.115 Y96.021 E0.01712 ; perimeter
G1 X101.354 Y96.071 F10800.000 ; move inwards before travel
G1 X101.400 Y96.104 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.188512
G1 F2400.000
G1 X101.574 Y95.973 E0.00264 ; infill
;WIDTH:0.202705
G1 X101.765 Y95.855 E0.00299 ; infill
G1 X100.763 Y96.384 F10800.000 ; move to first infill point
;WIDTH:0.188506
G1 F2400.000
G1 X100.315 Y96.349 E0.00544 ; infill
G1 X100.227 Y96.358 E0.00107 ; infill
G1 X100.096 Y96.196 E0.00252 ; infill
G1 X99.408 Y96.978 F10800.000 ; move to first infill point
;WIDTH:0.124579
G1 F2400.000
G1 X99.287 Y97.102 E0.00118 ; infill
G1 X99.218 Y98.918 F10800.000 ; move to first infill point
;WIDTH:0.275127
G1 F2400.000
G1 X99.313 Y99.156 E0.00495 ; infill
;WIDTH:0.315461
G1 X99.409 Y99.394 E0.00581 ; infill
;WIDTH:0.362012
G1 X99.448 Y99.464 E0.00212 ; infill
;WIDTH:0.393465
G1 X99.471 Y99.494 E0.00112 ; infill
;WIDTH:0.425133
G1 X99.520 Y99.637 E0.00478 ; infill
;WIDTH:0.4568
G1 X99.568 Y99.779 E0.00517 ; infill
;WIDTH:0.487609
G1 X99.600 Y99.851 E0.00290 ; infill
;WIDTH:0.505552
G1 X99.689 Y100.092 E0.00991 ; infill
G1 X99.713 Y100.245 F10800.000 ; move to first infill point
;WIDTH:0.432338
G1 F2400.000
G1 X99.719 Y100.273 E0.00092 ; infill
;WIDTH:0.422952
G1 X99.754 Y100.424 E0.00492 ; infill
;WIDTH:0.383015
G1 X99.790 Y100.576 E0.00440 ; infill
;WIDTH:0.343078
G1 X99.825 Y100.728 E0.00389 ; infill
;WIDTH:0.303141
G1 X99.917 Y101.026 E0.00675 ; infill
;WIDTH:0.265806
G1 X100.296 Y101.689 E0.01415 ; infill
;LAYER_CHANGE
;Z:11.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;11.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.917 Y101.026 E-0.20147 ; wipe and retract
;WIPE_END
G1 E-2.19853 F2400.000 ; retract
G1 Z11.475 F10800.000 ; lift Z
G1 Z11.600 ; move to next layer (57)
;AFTER_LAYER_CHANGE
;11.6
G1 Z11.675 ; lift Z
G1 X103.807 Y106.996 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.035 Y107.056 E0.00800 ; perimeter
G1 X103.867 Y107.061 E0.00571 ; perimeter
G1 X103.847 Y107.040 E0.00096 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.035 Y107.056 E-0.04977 ; wipe and retract
G1 X103.867 Y107.061 E-0.04452 ; wipe and retract
G1 X103.847 Y107.040 E-0.00751 ; wipe and retract
;WIPE_END
G1 E-2.29819 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X106.178 Y109.241 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.321 Y109.164 E0.00549 ; perimeter
G1 X106.440 Y108.930 E0.00890 ; perimeter
G1 X106.662 Y109.663 E0.02594 ; perimeter
G1 X106.422 Y109.462 E0.01063 ; perimeter
G1 X106.097 Y109.331 E0.01185 ; perimeter
G1 X106.138 Y109.285 E0.00209 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.321 Y109.164 E-0.05797 ; wipe and retract
G1 X106.440 Y108.930 E-0.06939 ; wipe and retract
G1 X106.662 Y109.663 E-0.20227 ; wipe and retract
G1 X106.422 Y109.462 E-0.08284 ; wipe and retract
G1 X106.097 Y109.331 E-0.09241 ; wipe and retract
G1 X106.138 Y109.285 E-0.01632 ; wipe and retract
;WIPE_END
G1 E-1.87881 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X107.385 Y111.580 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.458 Y111.850 E0.00946 ; perimeter
G1 X107.324 Y111.897 E0.00482 ; perimeter
G1 X107.374 Y111.639 E0.00888 ; perimeter
G1 X106.729 Y112.375 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.768 Y112.204 E0.00816 ; perimeter
G1 X106.771 Y112.043 E0.00744 ; perimeter
G1 X106.823 Y111.948 E0.00500 ; perimeter
G1 X106.920 Y111.449 E0.02355 ; perimeter
G1 X106.831 Y110.960 E0.02303 ; perimeter
G1 X106.678 Y110.438 E0.02520 ; perimeter
G1 X106.541 Y110.267 E0.01013 ; perimeter
G1 X106.494 Y110.151 E0.00579 ; perimeter
G1 X106.171 Y109.881 E0.01952 ; perimeter
G1 X105.762 Y109.716 E0.02044 ; perimeter
G1 X105.520 Y109.698 E0.01123 ; perimeter
G1 X105.395 Y109.605 E0.00724 ; perimeter
G1 X105.323 Y109.579 E0.00353 ; perimeter
G1 X105.297 Y109.477 E0.00486 ; perimeter
G1 X105.373 Y109.322 E0.00800 ; perimeter
G1 X105.582 Y109.094 E0.01430 ; perimeter
G1 X105.718 Y109.032 E0.00691 ; perimeter
G1 X105.876 Y108.855 E0.01098 ; perimeter
G1 X105.960 Y108.810 E0.00442 ; perimeter
G1 X106.056 Y108.622 E0.00980 ; perimeter
G1 X106.285 Y108.413 E0.01435 ; perimeter
G1 X106.139 Y108.143 E0.01420 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.087 Y107.937 E0.00890 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.081 Y107.907 E0.00141 ; perimeter
G1 X105.878 Y107.835 E0.00999 ; perimeter
G1 X105.693 Y107.681 E0.01113 ; perimeter
G1 X105.419 Y107.612 E0.01311 ; perimeter
G1 X105.003 Y107.617 E0.01928 ; perimeter
G1 X104.734 Y107.567 E0.01265 ; perimeter
G1 X104.374 Y107.564 E0.01666 ; perimeter
G1 X104.255 Y107.531 E0.00571 ; perimeter
G1 X103.696 Y107.549 E0.02594 ; perimeter
G1 X103.537 Y107.529 E0.00742 ; perimeter
G1 X103.465 Y107.337 E0.00953 ; perimeter
G1 X103.006 Y106.839 E0.03136 ; perimeter
G1 X102.574 Y106.560 E0.02381 ; perimeter
G1 X102.412 Y106.287 E0.01468 ; perimeter
G1 X102.322 Y105.965 E0.01551 ; perimeter
G1 X102.174 Y105.724 E0.01310 ; perimeter
G1 X101.783 Y105.357 E0.02481 ; perimeter
G1 X101.589 Y105.036 E0.01739 ; perimeter
G1 X101.619 Y104.818 E0.01018 ; perimeter
G1 X101.808 Y104.621 E0.01265 ; perimeter
G1 X102.107 Y104.630 E0.01386 ; perimeter
G1 X102.272 Y104.687 E0.00809 ; perimeter
G1 X102.411 Y104.838 E0.00951 ; perimeter
G1 X102.512 Y105.010 E0.00924 ; perimeter
G1 X102.545 Y105.149 E0.00662 ; perimeter
G1 X102.701 Y105.427 E0.01479 ; perimeter
G1 X102.910 Y105.659 E0.01446 ; perimeter
G1 X103.321 Y105.978 E0.02411 ; perimeter
G1 X103.394 Y106.011 E0.00370 ; perimeter
G1 X103.738 Y106.414 E0.02453 ; perimeter
G1 X103.877 Y106.516 E0.00800 ; perimeter
G1 X104.354 Y106.641 E0.02284 ; perimeter
G1 X104.865 Y106.650 E0.02365 ; perimeter
G1 X105.245 Y106.739 E0.01810 ; perimeter
G1 X105.663 Y106.968 E0.02209 ; perimeter
G1 X105.970 Y107.264 E0.01974 ; perimeter
G1 X106.295 Y107.724 E0.02610 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.513 Y108.013 E0.01511 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.562 Y108.175 E0.00784 ; perimeter
G1 X106.682 Y108.217 E0.00590 ; perimeter
G1 X106.803 Y108.412 E0.01063 ; perimeter
G1 X107.088 Y109.423 E0.04862 ; perimeter
G1 X107.600 Y110.822 E0.06904 ; perimeter
G1 X107.842 Y111.422 E0.02995 ; perimeter
G1 X107.944 Y111.799 E0.01809 ; perimeter
G1 X107.925 Y112.110 E0.01444 ; perimeter
G1 X107.870 Y112.218 E0.00562 ; perimeter
G1 X107.233 Y112.439 E0.03120 ; perimeter
G1 X106.873 Y112.522 E0.01715 ; perimeter
G1 X106.779 Y112.497 E0.00450 ; perimeter
G1 X106.742 Y112.434 E0.00337 ; perimeter
G1 X106.871 Y112.271 F10800.000 ; move inwards before travel
G1 X107.341 Y111.341 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.392093
G1 F2400.000
G1 X107.233 Y110.966 E0.01133 ; infill
;WIDTH:0.349149
G1 X107.209 Y110.878 E0.00231 ; infill
;WIDTH:0.333474
G1 X107.015 Y110.289 E0.01499 ; infill
;WIDTH:0.298774
G1 X106.893 Y110.061 E0.00550 ; infill
G1 X106.812 Y109.852 E0.00476 ; infill
G1 X105.778 Y109.293 F10800.000 ; move to first infill point
;WIDTH:0.102657
G1 F2400.000
G1 X105.641 Y109.434 E0.00097 ; infill
G1 X105.664 Y109.467 E0.00020 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.641 Y109.434 E-0.01069 ; wipe and retract
G1 X105.778 Y109.293 E-0.05178 ; wipe and retract
;WIPE_END
G1 E-2.33752 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X105.575 Y107.218 ; move to first infill point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.473029
G1 F2400.000
G1 X105.041 Y107.160 E0.01920 ; infill
G1 X104.797 Y107.110 E0.00893 ; infill
G1 X104.273 Y107.101 E0.01874 ; infill
G1 X103.103 Y106.370 F10800.000 ; move to first infill point
;WIDTH:0.45447
G1 F2400.000
G1 X102.911 Y106.236 E0.00804 ; infill
G1 X102.682 Y105.976 E0.01184 ; infill
;WIDTH:0.44163
G1 X102.452 Y105.717 E0.01147 ; infill
G1 X102.631 Y105.843 F10800.000 ; move to first infill point
;WIDTH:0.222439
G1 F2400.000
G1 X102.618 Y105.823 E0.00036 ; infill
;WIDTH:0.214547
G1 X102.459 Y105.610 E0.00380 ; infill
;WIDTH:0.164982
G1 X102.315 Y105.407 E0.00252 ; infill
;WIDTH:0.260665
G1 X101.937 Y104.866 E0.01195 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.315 Y105.407 E-0.17413 ; wipe and retract
;WIPE_END
G1 E-2.22587 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X102.054 Y95.622 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.071 Y95.577 E0.00163 ; perimeter
G1 X102.094 Y95.606 E0.00126 ; perimeter
G1 X103.498 Y95.854 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.916 Y95.627 E0.02203 ; perimeter
G1 X104.104 Y95.494 E0.01067 ; perimeter
G1 X104.399 Y95.412 E0.01418 ; perimeter
G1 X104.661 Y95.467 E0.01240 ; perimeter
G1 X104.783 Y95.618 E0.00898 ; perimeter
G1 X104.815 Y95.804 E0.00876 ; perimeter
G1 X104.683 Y96.126 E0.01613 ; perimeter
G1 X104.539 Y96.267 E0.00934 ; perimeter
G1 X104.469 Y96.318 E0.00401 ; perimeter
G1 X104.163 Y96.418 E0.01492 ; perimeter
G1 X103.030 Y96.094 E0.05457 ; perimeter
G1 X102.908 Y96.107 E0.00568 ; perimeter
G1 X102.597 Y96.065 E0.01454 ; perimeter
G1 X102.328 Y96.076 E0.01245 ; perimeter
G1 X101.280 Y96.196 E0.04886 ; perimeter
G1 X101.342 Y96.043 E0.00762 ; perimeter
G1 X101.436 Y95.940 E0.00648 ; perimeter
G1 X101.479 Y95.755 E0.00881 ; perimeter
G1 X101.515 Y95.717 E0.00240 ; perimeter
G1 X101.575 Y95.442 E0.01304 ; perimeter
G1 X101.630 Y95.378 E0.00389 ; perimeter
G1 X101.694 Y95.188 E0.00928 ; perimeter
G1 X101.786 Y95.101 E0.00587 ; perimeter
G1 X101.865 Y95.070 E0.00394 ; perimeter
G1 X102.153 Y95.069 E0.01331 ; perimeter
G1 X102.238 Y95.097 E0.00416 ; perimeter
G1 X102.411 Y95.220 E0.00983 ; perimeter
G1 X102.481 Y95.320 E0.00566 ; perimeter
G1 X102.697 Y95.534 E0.01406 ; perimeter
G1 X102.999 Y95.771 E0.01781 ; perimeter
G1 X103.438 Y95.844 E0.02062 ; perimeter
G1 X103.763 Y96.152 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.916 Y95.627 E-0.13838 ; wipe and retract
G1 X104.104 Y95.494 E-0.06081 ; wipe and retract
G1 X104.399 Y95.412 E-0.08078 ; wipe and retract
G1 X104.661 Y95.467 E-0.07065 ; wipe and retract
G1 X104.783 Y95.618 E-0.05118 ; wipe and retract
G1 X104.815 Y95.804 E-0.04989 ; wipe and retract
G1 X104.683 Y96.126 E-0.09188 ; wipe and retract
G1 X104.539 Y96.267 E-0.05322 ; wipe and retract
G1 X104.469 Y96.318 E-0.02286 ; wipe and retract
G1 X104.163 Y96.418 E-0.08499 ; wipe and retract
G1 X103.030 Y96.094 E-0.31091 ; wipe and retract
G1 X102.908 Y96.107 E-0.03237 ; wipe and retract
G1 X102.597 Y96.065 E-0.08282 ; wipe and retract
G1 X102.328 Y96.076 E-0.07094 ; wipe and retract
G1 X101.280 Y96.196 E-0.27837 ; wipe and retract
G1 X101.342 Y96.043 E-0.04342 ; wipe and retract
G1 X101.436 Y95.940 E-0.03691 ; wipe and retract
G1 X101.479 Y95.755 E-0.05017 ; wipe and retract
G1 X101.515 Y95.717 E-0.01370 ; wipe and retract
G1 X101.575 Y95.442 E-0.07431 ; wipe and retract
G1 X101.630 Y95.378 E-0.02219 ; wipe and retract
G1 X101.694 Y95.188 E-0.05289 ; wipe and retract
G1 X101.786 Y95.101 E-0.03343 ; wipe and retract
G1 X101.865 Y95.070 E-0.02246 ; wipe and retract
G1 X102.153 Y95.069 E-0.07581 ; wipe and retract
G1 X102.238 Y95.097 E-0.02371 ; wipe and retract
G1 X102.411 Y95.220 E-0.05603 ; wipe and retract
G1 X102.481 Y95.320 E-0.03222 ; wipe and retract
G1 X102.697 Y95.534 E-0.08011 ; wipe and retract
G1 X102.999 Y95.771 E-0.10145 ; wipe and retract
G1 X103.303 Y95.821 E-0.08117 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X100.381 Y101.843 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.510 Y101.968 E0.00609 ; perimeter
G1 X100.461 Y102.009 E0.00216 ; perimeter
G1 X100.407 Y101.897 E0.00422 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.510 Y101.968 E-0.03319 ; wipe and retract
G1 X100.461 Y102.009 E-0.01683 ; wipe and retract
G1 X100.407 Y101.897 E-0.03288 ; wipe and retract
;WIPE_END
G1 E-2.31710 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X99.465 Y96.575 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.535 Y96.264 E0.01081 ; perimeter
G1 X99.761 Y96.368 E0.00843 ; perimeter
G1 X99.514 Y96.541 E0.01021 ; perimeter
G1 X99.791 Y96.936 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.592 Y97.426 E0.02450 ; perimeter
G1 X99.466 Y97.985 E0.02654 ; perimeter
G1 X99.484 Y98.571 E0.02715 ; perimeter
G1 X99.606 Y98.774 E0.01098 ; perimeter
G1 X99.696 Y99.087 E0.01512 ; perimeter
G1 X99.813 Y99.296 E0.01107 ; perimeter
G1 X99.913 Y99.671 E0.01797 ; perimeter
G1 X100.138 Y100.286 E0.03037 ; perimeter
G1 X100.179 Y100.689 E0.01874 ; perimeter
G1 X100.262 Y100.878 E0.00957 ; perimeter
G1 X100.458 Y101.224 E0.01841 ; perimeter
G1 X100.589 Y101.321 E0.00753 ; perimeter
G1 X100.679 Y101.459 E0.00765 ; perimeter
G1 X100.969 Y101.742 E0.01877 ; perimeter
G1 X101.038 Y101.902 E0.00804 ; perimeter
G1 X101.042 Y102.017 E0.00536 ; perimeter
G1 X101.013 Y102.097 E0.00394 ; perimeter
G1 X101.009 Y102.180 E0.00387 ; perimeter
G1 X100.886 Y102.283 E0.00741 ; perimeter
G1 X100.865 Y102.396 E0.00536 ; perimeter
G1 X100.713 Y102.495 E0.00839 ; perimeter
G1 X100.678 Y102.603 E0.00525 ; perimeter
G1 X100.617 Y102.613 E0.00288 ; perimeter
G1 X100.501 Y102.576 E0.00565 ; perimeter
G1 X100.372 Y102.567 E0.00597 ; perimeter
G1 X100.189 Y102.435 E0.01047 ; perimeter
G1 X100.044 Y102.261 E0.01048 ; perimeter
G1 X99.682 Y101.480 E0.03987 ; perimeter
G1 X99.137 Y99.932 E0.07602 ; perimeter
G1 X98.955 Y99.240 E0.03317 ; perimeter
G1 X98.874 Y99.013 E0.01118 ; perimeter
G1 X98.842 Y98.783 E0.01072 ; perimeter
G1 X98.835 Y98.179 E0.02801 ; perimeter
G1 X98.970 Y96.580 E0.07431 ; perimeter
G1 X99.108 Y95.988 E0.02815 ; perimeter
G1 X99.229 Y95.823 E0.00950 ; perimeter
G1 X99.480 Y95.766 E0.01191 ; perimeter
G1 X99.705 Y95.794 E0.01052 ; perimeter
G1 X100.190 Y96.022 E0.02480 ; perimeter
G1 X100.247 Y96.091 E0.00414 ; perimeter
G1 X100.668 Y96.279 E0.02137 ; perimeter
G1 X100.742 Y96.274 E0.00344 ; perimeter
G1 X100.724 Y96.364 E0.00424 ; perimeter
G1 X100.418 Y96.568 E0.01705 ; perimeter
G1 X100.060 Y96.747 E0.01851 ; perimeter
G1 X99.840 Y96.901 E0.01247 ; perimeter
G1 X99.392 Y96.904 F10800.000 ; move inwards before travel
G1 X99.343 Y96.955 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.313883
G1 F2400.000
G1 X99.257 Y97.313 E0.00828 ; infill
;WIDTH:0.267031
G1 X99.196 Y97.693 E0.00719 ; infill
;WIDTH:0.215876
G1 X99.159 Y97.947 E0.00368 ; infill
;WIDTH:0.176783
G1 X99.170 Y98.686 E0.00822 ; infill
G1 X99.080 Y98.567 F10800.000 ; move to first infill point
;WIDTH:0.321778
G1 F2400.000
G1 X99.251 Y98.928 E0.00927 ; infill
G1 X99.351 Y99.249 E0.00780 ; infill
;WIDTH:0.3494
G1 X99.392 Y99.350 E0.00276 ; infill
;WIDTH:0.380388
G1 X99.529 Y99.812 E0.01353 ; infill
;WIDTH:0.387534
G1 X99.732 Y100.380 E0.01727 ; infill
G1 X99.775 Y100.571 E0.00563 ; infill
;WIDTH:0.294342
G1 X99.829 Y100.800 E0.00491 ; infill
;WIDTH:0.311264
G1 X99.929 Y101.053 E0.00607 ; infill
;WIDTH:0.338417
G1 X99.992 Y101.191 E0.00372 ; infill
;WIDTH:0.365569
G1 X100.055 Y101.329 E0.00407 ; infill
;WIDTH:0.37892
G1 X100.128 Y101.470 E0.00446 ; infill
;WIDTH:0.386244
G1 X100.147 Y101.503 E0.00107 ; infill
G1 X100.421 Y101.520 E0.00782 ; infill
G1 X100.656 Y102.205 F10800.000 ; move to first infill point
;WIDTH:0.104899
G1 F2400.000
G1 X100.543 Y102.288 E0.00072 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.656 Y102.205 E-0.03685 ; wipe and retract
;WIPE_END
G1 E-2.36315 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X102.599 Y95.824 ; move to first infill point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.122233
G1 F2400.000
G1 X102.518 Y95.738 E0.00077 ; infill
;WIDTH:0.10329
G1 X102.478 Y95.691 E0.00031 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.518 Y95.738 E-0.01641 ; wipe and retract
;WIPE_END
G1 E-2.38359 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X106.312 Y97.766 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.362 Y97.676 E0.00479 ; perimeter
G1 X106.478 Y97.543 E0.00817 ; perimeter
G1 X106.655 Y97.412 E0.01021 ; perimeter
G1 X106.906 Y97.309 E0.01256 ; perimeter
G1 X107.013 Y97.289 E0.00502 ; perimeter
G1 X107.166 Y97.299 E0.00712 ; perimeter
G1 X107.372 Y97.383 E0.01030 ; perimeter
G1 X107.622 Y97.631 E0.01631 ; perimeter
G1 X107.745 Y97.838 E0.01118 ; perimeter
G1 X107.809 Y98.028 E0.00927 ; perimeter
G1 X107.770 Y98.111 E0.00428 ; perimeter
G1 X107.521 Y98.192 E0.01209 ; perimeter
G1 X107.432 Y98.185 E0.00416 ; perimeter
G1 X106.938 Y98.236 E0.02299 ; perimeter
G1 X106.508 Y98.182 E0.02010 ; perimeter
G1 X106.360 Y98.088 E0.00807 ; perimeter
G1 X106.290 Y97.896 E0.00950 ; perimeter
G1 X106.302 Y97.825 E0.00329 ; perimeter
G1 X106.412 Y97.742 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.362 Y97.676 E-0.04255 ; wipe and retract
G1 X106.478 Y97.543 E-0.04657 ; wipe and retract
G1 X106.655 Y97.412 E-0.05819 ; wipe and retract
G1 X106.906 Y97.309 E-0.07156 ; wipe and retract
G1 X107.013 Y97.289 E-0.02862 ; wipe and retract
G1 X107.166 Y97.299 E-0.04054 ; wipe and retract
G1 X107.372 Y97.383 E-0.05865 ; wipe and retract
G1 X107.622 Y97.631 E-0.09294 ; wipe and retract
G1 X107.745 Y97.838 E-0.06369 ; wipe and retract
G1 X107.809 Y98.028 E-0.05284 ; wipe and retract
G1 X107.770 Y98.111 E-0.02436 ; wipe and retract
G1 X107.521 Y98.192 E-0.06890 ; wipe and retract
G1 X107.432 Y98.185 E-0.02370 ; wipe and retract
G1 X106.938 Y98.236 E-0.13097 ; wipe and retract
G1 X106.508 Y98.182 E-0.11452 ; wipe and retract
G1 X106.360 Y98.088 E-0.04600 ; wipe and retract
G1 X106.290 Y97.896 E-0.05412 ; wipe and retract
G1 X106.302 Y97.825 E-0.01874 ; wipe and retract
;WIPE_END
G1 E-1.36256 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X108.744 Y98.736 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.030 Y98.872 E0.01465 ; perimeter
G1 X109.173 Y99.013 E0.00929 ; perimeter
G1 X109.239 Y99.109 E0.00538 ; perimeter
G1 X109.694 Y99.987 E0.04586 ; perimeter
G1 X110.098 Y100.625 E0.03498 ; perimeter
G1 X110.495 Y101.152 E0.03052 ; perimeter
G1 X110.607 Y101.261 E0.00725 ; perimeter
G1 X110.758 Y101.608 E0.01754 ; perimeter
G1 X110.821 Y101.867 E0.01233 ; perimeter
G1 X110.782 Y102.017 E0.00718 ; perimeter
G1 X110.557 Y102.018 E0.01045 ; perimeter
G1 X110.344 Y101.968 E0.01013 ; perimeter
G1 X110.139 Y101.849 E0.01100 ; perimeter
G1 X109.954 Y101.767 E0.00935 ; perimeter
G1 X109.723 Y101.569 E0.01409 ; perimeter
G1 X109.504 Y101.208 E0.01958 ; perimeter
G1 X108.761 Y99.862 E0.07124 ; perimeter
G1 X108.601 Y99.647 E0.01240 ; perimeter
G1 X108.440 Y99.345 E0.01583 ; perimeter
G1 X108.390 Y99.028 E0.01486 ; perimeter
G1 X108.428 Y98.774 E0.01190 ; perimeter
G1 X108.685 Y98.744 E0.01198 ; perimeter
G1 X108.884 Y99.020 F10800.000 ; move inwards before travel
G1 X108.719 Y99.005 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.317615
G1 F2400.000
G1 X108.826 Y99.227 E0.00563 ; infill
G1 X109.090 Y99.661 E0.01160 ; infill
G1 X109.369 Y100.181 E0.01348 ; infill
;WIDTH:0.36518
G1 X109.771 Y100.860 E0.02113 ; infill
;WIDTH:0.38882
G1 X109.862 Y101.000 E0.00482 ; infill
;WIDTH:0.423566
G1 X110.057 Y101.287 E0.01096 ; infill
G1 X110.176 Y101.414 E0.00553 ; infill
;WIDTH:0.320625
G1 X110.289 Y101.492 E0.00316 ; infill
G1 X110.545 Y101.749 E0.00838 ; infill
G1 X111.525 Y102.546 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.665 Y102.507 E0.00672 ; perimeter
G1 X111.784 Y102.517 E0.00553 ; perimeter
G1 X111.945 Y102.449 E0.00810 ; perimeter
G1 X112.185 Y102.512 E0.01150 ; perimeter
G1 X112.622 Y102.753 E0.02310 ; perimeter
G1 X113.003 Y103.052 E0.02244 ; perimeter
G1 X113.105 Y103.111 E0.00544 ; perimeter
G1 X113.100 Y103.124 E0.00065 ; perimeter
G1 X112.842 Y103.337 E0.01550 ; perimeter
G1 X112.657 Y103.403 E0.00913 ; perimeter
G1 X112.318 Y103.434 E0.01574 ; perimeter
G1 X111.961 Y103.334 E0.01722 ; perimeter
G1 X111.757 Y103.199 E0.01132 ; perimeter
G1 X111.607 Y103.009 E0.01121 ; perimeter
G1 X111.489 Y102.594 E0.01999 ; perimeter
G1 X111.667 Y102.579 F10800.000 ; move inwards before travel
G1 X112.476 Y103.186 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.127597
G1 F2400.000
G1 X111.786 Y102.768 E0.00568 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.476 Y103.186 E-0.21279 ; wipe and retract
;WIPE_END
G1 E-2.18721 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X114.858 Y102.900 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.870 Y103.051 E0.00703 ; perimeter
G1 X114.816 Y103.219 E0.00818 ; perimeter
G1 X114.703 Y103.333 E0.00745 ; perimeter
G1 X114.489 Y103.405 E0.01043 ; perimeter
G1 X114.283 Y103.397 E0.00958 ; perimeter
G1 X114.020 Y103.274 E0.01341 ; perimeter
G1 X113.852 Y103.131 E0.01024 ; perimeter
G1 X113.835 Y103.046 E0.00399 ; perimeter
G1 X113.939 Y102.928 E0.00730 ; perimeter
G1 X113.990 Y102.820 E0.00550 ; perimeter
G1 X114.211 Y102.661 E0.01259 ; perimeter
G1 X114.419 Y102.609 E0.00993 ; perimeter
G1 X114.511 Y102.615 E0.00428 ; perimeter
G1 X114.622 Y102.649 E0.00539 ; perimeter
G1 X114.770 Y102.747 E0.00820 ; perimeter
G1 X114.833 Y102.845 E0.00540 ; perimeter
G1 X114.756 Y103.012 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.870 Y103.051 E-0.05518 ; wipe and retract
G1 X114.816 Y103.219 E-0.04661 ; wipe and retract
G1 X114.703 Y103.333 E-0.04243 ; wipe and retract
G1 X114.489 Y103.405 E-0.05944 ; wipe and retract
G1 X114.283 Y103.397 E-0.05457 ; wipe and retract
G1 X114.020 Y103.274 E-0.07639 ; wipe and retract
G1 X113.852 Y103.131 E-0.05835 ; wipe and retract
G1 X113.835 Y103.046 E-0.02272 ; wipe and retract
G1 X113.939 Y102.928 E-0.04159 ; wipe and retract
G1 X113.990 Y102.820 E-0.03134 ; wipe and retract
G1 X114.211 Y102.661 E-0.07173 ; wipe and retract
G1 X114.419 Y102.609 E-0.05658 ; wipe and retract
G1 X114.511 Y102.615 E-0.02437 ; wipe and retract
G1 X114.622 Y102.649 E-0.03073 ; wipe and retract
G1 X114.770 Y102.747 E-0.04672 ; wipe and retract
G1 X114.833 Y102.845 E-0.03077 ; wipe and retract
;WIPE_END
G1 E-1.65049 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X115.401 Y105.261 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.584 Y105.255 E0.00849 ; perimeter
G1 X115.723 Y105.319 E0.00710 ; perimeter
G1 X115.861 Y105.494 E0.01031 ; perimeter
G1 X115.889 Y105.782 E0.01339 ; perimeter
G1 X115.795 Y105.984 E0.01035 ; perimeter
G1 X115.711 Y106.041 E0.00468 ; perimeter
G1 X115.516 Y106.083 E0.00925 ; perimeter
G1 X115.405 Y106.058 E0.00527 ; perimeter
G1 X115.251 Y105.981 E0.00799 ; perimeter
G1 X115.141 Y105.831 E0.00862 ; perimeter
G1 X115.130 Y105.568 E0.01220 ; perimeter
G1 X115.187 Y105.428 E0.00701 ; perimeter
G1 X115.260 Y105.331 E0.00560 ; perimeter
G1 X115.345 Y105.283 E0.00452 ; perimeter
G1 X115.528 Y105.393 F10800.000 ; move inwards before travel
G1 X115.522 Y105.709 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310073
G1 F2400.000
G1 X115.498 Y105.607 E0.00234 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.522 Y105.709 E-0.02786 ; wipe and retract
;WIPE_END
G1 E-2.37214 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X115.595 Y110.983 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.673 Y111.009 E0.00379 ; perimeter
G1 X115.828 Y111.166 E0.01023 ; perimeter
G1 X115.880 Y111.335 E0.00815 ; perimeter
G1 X115.863 Y111.569 E0.01090 ; perimeter
G1 X115.783 Y111.744 E0.00889 ; perimeter
G1 X115.678 Y111.830 E0.00631 ; perimeter
G1 X115.546 Y111.867 E0.00635 ; perimeter
G1 X115.385 Y111.848 E0.00752 ; perimeter
G1 X115.249 Y111.731 E0.00831 ; perimeter
G1 X115.195 Y111.647 E0.00464 ; perimeter
G1 X115.157 Y111.482 E0.00780 ; perimeter
G1 X115.166 Y111.278 E0.00949 ; perimeter
G1 X115.235 Y111.114 E0.00823 ; perimeter
G1 X115.295 Y111.045 E0.00423 ; perimeter
G1 X115.414 Y110.989 E0.00609 ; perimeter
G1 X115.535 Y110.985 E0.00562 ; perimeter
G1 X115.625 Y111.059 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.673 Y111.009 E-0.03682 ; wipe and retract
G1 X115.828 Y111.166 E-0.05826 ; wipe and retract
G1 X115.880 Y111.335 E-0.04644 ; wipe and retract
G1 X115.863 Y111.569 E-0.06207 ; wipe and retract
G1 X115.783 Y111.744 E-0.05065 ; wipe and retract
G1 X115.678 Y111.830 E-0.03597 ; wipe and retract
G1 X115.546 Y111.867 E-0.03618 ; wipe and retract
G1 X115.385 Y111.848 E-0.04285 ; wipe and retract
G1 X115.249 Y111.731 E-0.04737 ; wipe and retract
G1 X115.195 Y111.647 E-0.02643 ; wipe and retract
G1 X115.157 Y111.482 E-0.04446 ; wipe and retract
G1 X115.166 Y111.278 E-0.05406 ; wipe and retract
G1 X115.235 Y111.114 E-0.04687 ; wipe and retract
G1 X115.295 Y111.045 E-0.02409 ; wipe and retract
G1 X115.414 Y110.989 E-0.03469 ; wipe and retract
G1 X115.535 Y110.985 E-0.03203 ; wipe and retract
;WIPE_END
G1 E-1.72076 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X115.315 Y114.709 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.486 Y114.756 E0.00821 ; perimeter
G1 X115.554 Y114.819 E0.00433 ; perimeter
G1 X115.618 Y114.924 E0.00571 ; perimeter
G1 X115.649 Y115.051 E0.00603 ; perimeter
G1 X115.643 Y115.201 E0.00695 ; perimeter
G1 X115.617 Y115.294 E0.00448 ; perimeter
G1 X115.566 Y115.374 E0.00442 ; perimeter
G1 X115.181 Y115.718 E0.02390 ; perimeter
G1 X114.900 Y115.913 E0.01583 ; perimeter
G1 X114.795 Y115.942 E0.00508 ; perimeter
G1 X114.665 Y116.010 E0.00677 ; perimeter
G1 X114.402 Y116.022 E0.01219 ; perimeter
G1 X114.243 Y115.992 E0.00749 ; perimeter
G1 X114.060 Y115.853 E0.01066 ; perimeter
G1 X113.965 Y115.702 E0.00827 ; perimeter
G1 X113.952 Y115.650 E0.00248 ; perimeter
G1 X114.004 Y115.461 E0.00906 ; perimeter
G1 X114.098 Y115.351 E0.00672 ; perimeter
G1 X114.347 Y115.181 E0.01396 ; perimeter
G1 X114.479 Y115.133 E0.00651 ; perimeter
G1 X114.891 Y114.848 E0.02319 ; perimeter
G1 X115.151 Y114.719 E0.01343 ; perimeter
G1 X115.255 Y114.713 E0.00482 ; perimeter
G1 X115.392 Y114.869 F10800.000 ; move inwards before travel
G1 X115.244 Y115.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.409786
G1 F2400.000
G1 X114.710 Y115.508 E0.02009 ; infill
G1 X114.448 Y115.611 E0.00859 ; infill
;WIDTH:0.385575
G1 X114.222 Y115.658 E0.00657 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.448 Y115.611 E-0.06088 ; wipe and retract
;WIPE_END
G1 E-2.33912 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 X112.199 Y115.506 ; move to first perimeter point
G1 Z11.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.263 Y115.614 E0.00578 ; perimeter
G1 X112.280 Y115.814 E0.00934 ; perimeter
G1 X112.254 Y115.934 E0.00567 ; perimeter
G1 X112.200 Y116.020 E0.00471 ; perimeter
G1 X112.135 Y116.076 E0.00398 ; perimeter
G1 X111.916 Y116.138 E0.01056 ; perimeter
G1 X111.721 Y116.114 E0.00910 ; perimeter
G1 X111.572 Y116.043 E0.00764 ; perimeter
G1 X111.491 Y115.902 E0.00752 ; perimeter
G1 X111.469 Y115.802 E0.00476 ; perimeter
G1 X111.488 Y115.634 E0.00783 ; perimeter
G1 X111.577 Y115.482 E0.00817 ; perimeter
G1 X111.701 Y115.420 E0.00642 ; perimeter
G1 X111.979 Y115.410 E0.01288 ; perimeter
G1 X112.152 Y115.470 E0.00849 ; perimeter
G1 X112.172 Y115.628 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:11.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;11.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.263 Y115.614 E-0.04795 ; wipe and retract
G1 X112.280 Y115.814 E-0.05320 ; wipe and retract
G1 X112.254 Y115.934 E-0.03230 ; wipe and retract
G1 X112.200 Y116.020 E-0.02683 ; wipe and retract
G1 X112.135 Y116.076 E-0.02267 ; wipe and retract
G1 X111.916 Y116.138 E-0.06016 ; wipe and retract
G1 X111.721 Y116.114 E-0.05182 ; wipe and retract
G1 X111.572 Y116.043 E-0.04351 ; wipe and retract
G1 X111.491 Y115.902 E-0.04283 ; wipe and retract
G1 X111.469 Y115.802 E-0.02709 ; wipe and retract
G1 X111.488 Y115.634 E-0.04461 ; wipe and retract
G1 X111.577 Y115.482 E-0.04654 ; wipe and retract
G1 X111.701 Y115.420 E-0.03656 ; wipe and retract
G1 X111.979 Y115.410 E-0.07336 ; wipe and retract
G1 X112.152 Y115.470 E-0.04839 ; wipe and retract
;WIPE_END
G1 E-1.74220 F2400.000 ; retract
G1 Z11.675 F10800.000 ; lift Z
G1 Z11.800 ; move to next layer (58)
;AFTER_LAYER_CHANGE
;11.8
G1 Z11.875 ; lift Z
G1 X105.098 Y107.117 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.725 Y107.049 E0.01282 ; perimeter
G1 X104.873 Y107.049 E0.00500 ; perimeter
G1 X105.042 Y107.096 E0.00594 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.725 Y107.049 E-0.08450 ; wipe and retract
G1 X104.873 Y107.049 E-0.03895 ; wipe and retract
G1 X105.042 Y107.096 E-0.04628 ; wipe and retract
;WIPE_END
G1 E-2.23027 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X106.500 Y108.859 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.615 Y109.521 E0.02276 ; perimeter
G1 X106.525 Y109.394 E0.00529 ; perimeter
G1 X106.336 Y109.321 E0.00684 ; perimeter
G1 X106.267 Y109.267 E0.00298 ; perimeter
G1 X106.364 Y109.151 E0.00514 ; perimeter
G1 X106.376 Y109.096 E0.00188 ; perimeter
G1 X106.460 Y108.990 E0.00460 ; perimeter
G1 X106.482 Y108.916 E0.00261 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.615 Y109.521 E-0.16347 ; wipe and retract
G1 X106.525 Y109.394 E-0.04127 ; wipe and retract
G1 X106.336 Y109.321 E-0.05329 ; wipe and retract
G1 X106.267 Y109.267 E-0.02325 ; wipe and retract
G1 X106.364 Y109.151 E-0.04005 ; wipe and retract
G1 X106.376 Y109.096 E-0.01464 ; wipe and retract
G1 X106.460 Y108.990 E-0.03588 ; wipe and retract
G1 X106.482 Y108.916 E-0.02034 ; wipe and retract
;WIPE_END
G1 E-2.00782 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X107.425 Y111.592 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.545 Y111.845 E0.00945 ; perimeter
G1 X107.414 Y111.844 E0.00441 ; perimeter
G1 X107.401 Y111.742 E0.00350 ; perimeter
G1 X107.416 Y111.652 E0.00309 ; perimeter
G1 X106.963 Y111.432 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.643 Y110.424 E0.04895 ; perimeter
G1 X106.500 Y110.128 E0.01524 ; perimeter
G1 X106.393 Y110.040 E0.00642 ; perimeter
G1 X106.216 Y109.791 E0.01413 ; perimeter
G1 X106.097 Y109.745 E0.00594 ; perimeter
G1 X105.824 Y109.534 E0.01598 ; perimeter
G1 X105.752 Y109.528 E0.00336 ; perimeter
G1 X105.684 Y109.476 E0.00396 ; perimeter
G1 X105.632 Y109.349 E0.00635 ; perimeter
G1 X105.737 Y109.190 E0.00882 ; perimeter
G1 X105.751 Y109.132 E0.00275 ; perimeter
G1 X105.918 Y108.933 E0.01205 ; perimeter
G1 X105.928 Y108.885 E0.00226 ; perimeter
G1 X106.025 Y108.763 E0.00722 ; perimeter
G1 X106.110 Y108.481 E0.01363 ; perimeter
G1 X106.078 Y108.253 E0.01063 ; perimeter
G1 X105.696 Y107.821 E0.02672 ; perimeter
G1 X105.541 Y107.781 E0.00745 ; perimeter
G1 X105.335 Y107.654 E0.01119 ; perimeter
G1 X104.820 Y107.554 E0.02428 ; perimeter
G1 X104.741 Y107.553 E0.00367 ; perimeter
G1 X104.179 Y107.400 E0.02700 ; perimeter
G1 X104.124 Y107.399 E0.00253 ; perimeter
G1 X103.781 Y107.226 E0.01781 ; perimeter
G1 X103.518 Y106.931 E0.01832 ; perimeter
G1 X103.299 Y106.803 E0.01174 ; perimeter
G1 X102.864 Y106.683 E0.02089 ; perimeter
G1 X102.590 Y106.496 E0.01537 ; perimeter
G1 X102.403 Y106.220 E0.01548 ; perimeter
G1 X102.350 Y106.031 E0.00908 ; perimeter
G1 X102.076 Y105.664 E0.02119 ; perimeter
G1 X101.737 Y105.290 E0.02339 ; perimeter
G1 X101.591 Y105.024 E0.01407 ; perimeter
G1 X101.630 Y104.802 E0.01046 ; perimeter
G1 X101.719 Y104.716 E0.00571 ; perimeter
G1 X101.804 Y104.588 E0.00713 ; perimeter
G1 X102.077 Y104.598 E0.01264 ; perimeter
G1 X102.160 Y104.651 E0.00454 ; perimeter
G1 X102.278 Y104.690 E0.00576 ; perimeter
G1 X102.490 Y104.931 E0.01486 ; perimeter
G1 X102.619 Y105.137 E0.01129 ; perimeter
G1 X102.711 Y105.236 E0.00624 ; perimeter
G1 X102.844 Y105.474 E0.01261 ; perimeter
G1 X102.972 Y105.616 E0.00886 ; perimeter
G1 X103.337 Y105.886 E0.02103 ; perimeter
G1 X103.598 Y106.003 E0.01325 ; perimeter
G1 X103.771 Y106.208 E0.01240 ; perimeter
G1 X104.141 Y106.479 E0.02127 ; perimeter
G1 X104.572 Y106.567 E0.02037 ; perimeter
G1 X104.938 Y106.568 E0.01694 ; perimeter
G1 X105.252 Y106.653 E0.01509 ; perimeter
G1 X105.631 Y106.854 E0.01987 ; perimeter
G1 X106.021 Y107.171 E0.02329 ; perimeter
G1 X106.463 Y107.601 E0.02855 ; perimeter
G1 X106.501 Y107.674 E0.00383 ; perimeter
G1 X106.818 Y108.072 E0.02354 ; perimeter
G1 X106.940 Y108.433 E0.01765 ; perimeter
G1 X106.980 Y108.821 E0.01810 ; perimeter
G1 X107.075 Y109.377 E0.02610 ; perimeter
G1 X107.313 Y110.116 E0.03599 ; perimeter
G1 X107.415 Y110.309 E0.01013 ; perimeter
G1 X107.611 Y110.856 E0.02689 ; perimeter
G1 X108.027 Y111.737 E0.04516 ; perimeter
G1 X108.096 Y111.998 E0.01250 ; perimeter
G1 X108.080 Y112.183 E0.00859 ; perimeter
G1 X108.036 Y112.300 E0.00580 ; perimeter
G1 X107.942 Y112.342 E0.00476 ; perimeter
G1 X107.473 Y112.325 E0.02173 ; perimeter
G1 X107.297 Y112.363 E0.00837 ; perimeter
G1 X107.006 Y112.348 E0.01347 ; perimeter
G1 X106.934 Y112.238 E0.00611 ; perimeter
G1 X106.933 Y111.875 E0.01682 ; perimeter
G1 X106.913 Y111.736 E0.00649 ; perimeter
G1 X106.954 Y111.491 E0.01151 ; perimeter
G1 X107.268 Y111.172 F10800.000 ; move inwards before travel
G1 X107.381 Y111.355 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.379733
G1 F2400.000
G1 X107.247 Y111.015 E0.01025 ; infill
;WIDTH:0.353943
G1 X107.061 Y110.466 E0.01499 ; infill
;WIDTH:0.332545
G1 X106.990 Y110.296 E0.00443 ; infill
;WIDTH:0.299224
G1 X106.813 Y109.870 E0.00984 ; infill
G1 X106.541 Y109.828 E0.00587 ; infill
G1 X106.391 Y107.923 F10800.000 ; move to first infill point
;WIDTH:0.375098
G1 F2400.000
G1 X106.517 Y108.451 E0.01500 ; infill
G1 X106.502 Y108.466 E0.00057 ; infill
;WIDTH:0.342817
G1 X106.488 Y108.481 E0.00051 ; infill
;WIDTH:0.310538
G1 X106.418 Y108.541 E0.00206 ; infill
;WIDTH:0.262703
G1 X106.348 Y108.602 E0.00169 ; infill
G1 X106.718 Y108.626 F10800.000 ; move to first infill point
;WIDTH:0.265004
G1 F2400.000
G1 X106.384 Y108.080 E0.01182 ; infill
G1 X106.171 Y107.817 E0.00624 ; infill
G1 X105.905 Y107.537 E0.00714 ; infill
G1 X105.355 Y107.113 E0.01283 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.905 Y107.537 E-0.18337 ; wipe and retract
G1 X106.171 Y107.817 E-0.10203 ; wipe and retract
G1 X106.384 Y108.080 E-0.08914 ; wipe and retract
G1 X106.718 Y108.626 E-0.16889 ; wipe and retract
;WIPE_END
G1 E-1.85658 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X102.804 Y106.034 ; move to first infill point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.464145
G1 F2400.000
G1 X102.926 Y106.161 E0.00619 ; infill
G1 X103.061 Y106.258 E0.00582 ; infill
G1 X103.802 Y106.530 E0.02763 ; infill
G1 X104.233 Y106.954 F10800.000 ; move to first infill point
;WIDTH:0.454389
G1 F2400.000
G1 X104.137 Y106.921 E0.00347 ; infill
;WIDTH:0.427269
G1 X104.041 Y106.887 E0.00324 ; infill
;WIDTH:0.400151
G1 X104.008 Y106.868 E0.00114 ; infill
;WIDTH:0.375976
G1 X103.951 Y106.827 E0.00194 ; infill
;WIDTH:0.346025
G1 X103.859 Y106.743 E0.00315 ; infill
;WIDTH:0.320013
G1 X103.766 Y106.659 E0.00288 ; infill
;WIDTH:0.294002
G1 X103.436 Y106.427 E0.00843 ; infill
G1 X103.078 Y106.492 F10800.000 ; move to first infill point
;WIDTH:0.338786
G1 F2400.000
G1 X102.706 Y105.889 E0.01744 ; infill
;WIDTH:0.322276
G1 X102.676 Y105.844 E0.00125 ; infill
;WIDTH:0.306522
G1 X102.555 Y105.698 E0.00415 ; infill
;WIDTH:0.28926
G1 X102.400 Y105.461 E0.00579 ; infill
G1 X101.982 Y104.972 E0.01318 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.400 Y105.461 E-0.16984 ; wipe and retract
G1 X102.555 Y105.698 E-0.07455 ; wipe and retract
;WIPE_END
G1 E-2.15561 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X99.418 Y96.626 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.495 Y96.216 E0.01412 ; perimeter
G1 X99.656 Y96.324 E0.00655 ; perimeter
G1 X99.449 Y96.575 E0.01102 ; perimeter
G1 X100.243 Y96.415 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.182 Y96.496 E0.00475 ; perimeter
G1 X100.108 Y96.533 E0.00379 ; perimeter
G1 X99.850 Y96.847 E0.01885 ; perimeter
G1 X99.640 Y97.405 E0.02763 ; perimeter
G1 X99.511 Y97.968 E0.02674 ; perimeter
G1 X99.536 Y98.466 E0.02310 ; perimeter
G1 X99.673 Y98.959 E0.02369 ; perimeter
G1 X99.860 Y99.854 E0.04234 ; perimeter
G1 X100.014 Y100.291 E0.02145 ; perimeter
G1 X100.156 Y100.602 E0.01585 ; perimeter
G1 X100.169 Y100.736 E0.00624 ; perimeter
G1 X100.403 Y101.182 E0.02334 ; perimeter
G1 X100.585 Y101.463 E0.01549 ; perimeter
G1 X100.740 Y101.614 E0.01004 ; perimeter
G1 X100.847 Y101.764 E0.00852 ; perimeter
G1 X100.911 Y101.940 E0.00868 ; perimeter
G1 X100.932 Y102.319 E0.01757 ; perimeter
G1 X100.799 Y102.762 E0.02142 ; perimeter
G1 X100.768 Y102.809 E0.00262 ; perimeter
G1 X100.648 Y102.813 E0.00554 ; perimeter
G1 X100.387 Y102.728 E0.01273 ; perimeter
G1 X100.214 Y102.585 E0.01040 ; perimeter
G1 X100.118 Y102.460 E0.00729 ; perimeter
G1 X99.799 Y101.829 E0.03275 ; perimeter
G1 X99.683 Y101.430 E0.01925 ; perimeter
G1 X99.483 Y100.857 E0.02811 ; perimeter
G1 X99.412 Y100.498 E0.01697 ; perimeter
G1 X99.174 Y99.861 E0.03146 ; perimeter
G1 X98.939 Y99.309 E0.02779 ; perimeter
G1 X98.789 Y98.882 E0.02098 ; perimeter
G1 X98.729 Y98.466 E0.01945 ; perimeter
G1 X98.944 Y96.522 E0.09062 ; perimeter
G1 X99.072 Y95.899 E0.02947 ; perimeter
G1 X99.219 Y95.710 E0.01110 ; perimeter
G1 X99.346 Y95.664 E0.00625 ; perimeter
G1 X99.453 Y95.662 E0.00494 ; perimeter
G1 X99.553 Y95.693 E0.00485 ; perimeter
G1 X99.881 Y95.881 E0.01752 ; perimeter
G1 X100.062 Y96.038 E0.01108 ; perimeter
G1 X100.257 Y96.256 E0.01357 ; perimeter
G1 X100.299 Y96.319 E0.00350 ; perimeter
G1 X100.275 Y96.363 E0.00232 ; perimeter
G1 X100.141 Y96.421 F10800.000 ; move inwards before travel
G1 X99.361 Y96.860 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.419342
G1 F2400.000
G1 X99.311 Y97.070 E0.00676 ; infill
;WIDTH:0.389327
G1 X99.260 Y97.280 E0.00622 ; infill
;WIDTH:0.359313
G1 X99.203 Y97.611 E0.00882 ; infill
;WIDTH:0.320482
G1 X99.150 Y97.920 E0.00725 ; infill
;WIDTH:0.28634
G1 X99.133 Y98.405 E0.00983 ; infill
G1 X99.144 Y98.547 E0.00288 ; infill
;WIDTH:0.389919
G1 X99.276 Y99.044 E0.01484 ; infill
;WIDTH:0.371477
G1 X99.307 Y99.167 E0.00345 ; infill
;WIDTH:0.348182
G1 X99.333 Y99.259 E0.00243 ; infill
;WIDTH:0.324381
G1 X99.415 Y99.502 E0.00600 ; infill
;WIDTH:0.284577
G1 X99.492 Y99.732 E0.00488 ; infill
;WIDTH:0.247493
G1 X99.515 Y99.804 E0.00128 ; infill
;WIDTH:0.239285
G1 X99.540 Y99.913 E0.00183 ; infill
;WIDTH:0.209569
G1 X99.716 Y100.405 E0.00724 ; infill
;WIDTH:0.197142
G1 X99.844 Y100.854 E0.00598 ; infill
G1 X99.944 Y101.083 E0.00320 ; infill
;WIDTH:0.318947
G1 X100.137 Y101.525 E0.01107 ; infill
;WIDTH:0.424991
G1 X100.234 Y101.722 E0.00700 ; infill
G1 X100.422 Y101.988 E0.01034 ; infill
G1 X100.511 Y102.280 E0.00968 ; infill
;WIDTH:0.403017
G1 X100.514 Y102.294 E0.00044 ; infill
;WIDTH:0.390812
G1 X100.605 Y102.546 E0.00773 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.514 Y102.294 E-0.07055 ; wipe and retract
;WIPE_END
G1 E-2.32945 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X101.633 Y95.939 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.643 Y95.736 E0.00939 ; perimeter
G1 X101.579 Y95.564 E0.00853 ; perimeter
G1 X101.626 Y95.347 E0.01026 ; perimeter
G1 X101.599 Y95.249 E0.00470 ; perimeter
G1 X101.633 Y95.141 E0.00528 ; perimeter
G1 X101.689 Y95.090 E0.00350 ; perimeter
G1 X101.735 Y95.008 E0.00435 ; perimeter
G1 X101.789 Y94.981 E0.00281 ; perimeter
G1 X102.116 Y94.974 E0.01513 ; perimeter
G1 X102.229 Y95.014 E0.00558 ; perimeter
G1 X102.351 Y95.126 E0.00767 ; perimeter
G1 X102.491 Y95.346 E0.01207 ; perimeter
G1 X102.534 Y95.386 E0.00272 ; perimeter
G1 X102.593 Y95.591 E0.00991 ; perimeter
G1 X102.626 Y95.638 E0.00264 ; perimeter
G1 X102.639 Y95.751 E0.00526 ; perimeter
G1 X102.595 Y95.754 E0.00204 ; perimeter
G1 X102.404 Y95.913 E0.01152 ; perimeter
G1 X101.889 Y95.961 E0.02398 ; perimeter
G1 X101.693 Y95.944 E0.00911 ; perimeter
G1 X101.738 Y95.766 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.643 Y95.736 E-0.05641 ; wipe and retract
G1 X101.579 Y95.564 E-0.04860 ; wipe and retract
G1 X101.626 Y95.347 E-0.05845 ; wipe and retract
G1 X101.599 Y95.249 E-0.02676 ; wipe and retract
G1 X101.633 Y95.141 E-0.03008 ; wipe and retract
G1 X101.689 Y95.090 E-0.01991 ; wipe and retract
G1 X101.735 Y95.008 E-0.02477 ; wipe and retract
G1 X101.789 Y94.981 E-0.01599 ; wipe and retract
G1 X102.116 Y94.974 E-0.08622 ; wipe and retract
G1 X102.229 Y95.014 E-0.03178 ; wipe and retract
G1 X102.351 Y95.126 E-0.04371 ; wipe and retract
G1 X102.491 Y95.346 E-0.06876 ; wipe and retract
G1 X102.534 Y95.386 E-0.01547 ; wipe and retract
G1 X102.593 Y95.591 E-0.05646 ; wipe and retract
G1 X102.626 Y95.638 E-0.01506 ; wipe and retract
G1 X102.639 Y95.751 E-0.02994 ; wipe and retract
G1 X102.595 Y95.754 E-0.01161 ; wipe and retract
G1 X102.404 Y95.913 E-0.06565 ; wipe and retract
G1 X101.889 Y95.961 E-0.13660 ; wipe and retract
G1 X101.693 Y95.944 E-0.05188 ; wipe and retract
;WIPE_END
G1 E-1.50587 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X103.746 Y95.974 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.782 Y95.950 E0.00200 ; perimeter
G1 X103.837 Y95.799 E0.00744 ; perimeter
G1 X103.892 Y95.768 E0.00293 ; perimeter
G1 X103.988 Y95.593 E0.00922 ; perimeter
G1 X104.173 Y95.462 E0.01051 ; perimeter
G1 X104.228 Y95.387 E0.00429 ; perimeter
G1 X104.370 Y95.317 E0.00736 ; perimeter
G1 X104.590 Y95.308 E0.01018 ; perimeter
G1 X104.811 Y95.407 E0.01121 ; perimeter
G1 X104.948 Y95.603 E0.01107 ; perimeter
G1 X104.917 Y95.820 E0.01015 ; perimeter
G1 X104.805 Y96.037 E0.01132 ; perimeter
G1 X104.657 Y96.165 E0.00908 ; perimeter
G1 X104.223 Y96.294 E0.02097 ; perimeter
G1 X103.879 Y96.179 E0.01681 ; perimeter
G1 X103.761 Y96.031 E0.00873 ; perimeter
G1 X103.788 Y95.965 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.782 Y95.950 E-0.02220 ; wipe and retract
G1 X103.837 Y95.799 E-0.04236 ; wipe and retract
G1 X103.892 Y95.768 E-0.01671 ; wipe and retract
G1 X103.988 Y95.593 E-0.05254 ; wipe and retract
G1 X104.173 Y95.462 E-0.05986 ; wipe and retract
G1 X104.228 Y95.387 E-0.02444 ; wipe and retract
G1 X104.370 Y95.317 E-0.04195 ; wipe and retract
G1 X104.590 Y95.308 E-0.05800 ; wipe and retract
G1 X104.811 Y95.407 E-0.06386 ; wipe and retract
G1 X104.948 Y95.603 E-0.06308 ; wipe and retract
G1 X104.917 Y95.820 E-0.05781 ; wipe and retract
G1 X104.805 Y96.037 E-0.06451 ; wipe and retract
G1 X104.657 Y96.165 E-0.05174 ; wipe and retract
G1 X104.223 Y96.294 E-0.11944 ; wipe and retract
G1 X103.879 Y96.179 E-0.09575 ; wipe and retract
G1 X103.761 Y96.031 E-0.04976 ; wipe and retract
;WIPE_END
G1 E-1.51598 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X107.157 Y97.717 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.195 Y97.707 E0.00132 ; perimeter
G1 X107.229 Y97.743 E0.00168 ; perimeter
G1 X107.213 Y97.737 E0.00057 ; perimeter
G1 X106.707 Y98.133 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.553 Y98.030 E0.00857 ; perimeter
G1 X106.479 Y97.844 E0.00928 ; perimeter
G1 X106.494 Y97.705 E0.00649 ; perimeter
G1 X106.539 Y97.589 E0.00574 ; perimeter
G1 X106.806 Y97.348 E0.01668 ; perimeter
G1 X107.076 Y97.223 E0.01378 ; perimeter
G1 X107.311 Y97.231 E0.01088 ; perimeter
G1 X107.467 Y97.296 E0.00783 ; perimeter
G1 X107.884 Y97.750 E0.02855 ; perimeter
G1 X107.968 Y97.891 E0.00761 ; perimeter
G1 X108.072 Y98.174 E0.01400 ; perimeter
G1 X108.562 Y98.510 E0.02750 ; perimeter
G1 X108.776 Y98.612 E0.01098 ; perimeter
G1 X108.984 Y98.750 E0.01158 ; perimeter
G1 X109.131 Y98.914 E0.01018 ; perimeter
G1 X109.268 Y99.180 E0.01388 ; perimeter
G1 X109.394 Y99.618 E0.02110 ; perimeter
G1 X109.503 Y99.830 E0.01106 ; perimeter
G1 X110.002 Y100.579 E0.04166 ; perimeter
G1 X110.222 Y100.710 E0.01186 ; perimeter
G1 X110.503 Y101.084 E0.02168 ; perimeter
G1 X110.540 Y101.244 E0.00761 ; perimeter
G1 X110.642 Y101.465 E0.01129 ; perimeter
G1 X110.611 Y101.643 E0.00834 ; perimeter
G1 X110.500 Y101.786 E0.00839 ; perimeter
G1 X110.211 Y101.803 E0.01340 ; perimeter
G1 X109.945 Y101.709 E0.01309 ; perimeter
G1 X109.700 Y101.491 E0.01517 ; perimeter
G1 X109.437 Y101.008 E0.02549 ; perimeter
G1 X109.234 Y100.559 E0.02283 ; perimeter
G1 X109.005 Y100.128 E0.02261 ; perimeter
G1 X108.721 Y99.689 E0.02420 ; perimeter
G1 X108.672 Y99.658 E0.00268 ; perimeter
G1 X108.433 Y99.354 E0.01793 ; perimeter
G1 X108.356 Y99.198 E0.00805 ; perimeter
G1 X108.176 Y98.652 E0.02665 ; perimeter
G1 X107.821 Y98.367 E0.02107 ; perimeter
G1 X107.434 Y98.283 E0.01831 ; perimeter
G1 X107.295 Y98.280 E0.00644 ; perimeter
G1 X107.004 Y98.174 E0.01435 ; perimeter
G1 X106.766 Y98.141 E0.01113 ; perimeter
G1 X106.697 Y97.948 F10800.000 ; move inwards before travel
G1 X108.464 Y98.755 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350435
G1 F2400.000
G1 X108.724 Y99.051 E0.01010 ; infill
;WIDTH:0.379298
G1 X108.904 Y99.324 E0.00914 ; infill
;WIDTH:0.25689
G1 X109.046 Y99.591 E0.00538 ; infill
;WIDTH:0.140126
G1 X109.256 Y99.983 E0.00359 ; infill
;WIDTH:0.165814
G1 X109.386 Y100.200 E0.00259 ; infill
;WIDTH:0.192112
G1 X109.518 Y100.422 E0.00320 ; infill
;WIDTH:0.229242
G1 X109.628 Y100.621 E0.00352 ; infill
;WIDTH:0.266369
G1 X109.739 Y100.820 E0.00422 ; infill
;WIDTH:0.277074
G1 X109.757 Y100.848 E0.00067 ; infill
;WIDTH:0.285331
G1 X109.770 Y100.862 E0.00036 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.757 Y100.848 E-0.00477 ; wipe and retract
;WIPE_END
G1 E-2.39523 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X111.693 Y102.675 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.783 Y102.593 E0.00561 ; perimeter
G1 X111.994 Y102.485 E0.01099 ; perimeter
G1 X112.234 Y102.546 E0.01145 ; perimeter
G1 X112.286 Y102.544 E0.00244 ; perimeter
G1 X112.714 Y102.751 E0.02201 ; perimeter
G1 X112.862 Y102.783 E0.00701 ; perimeter
G1 X112.953 Y102.854 E0.00536 ; perimeter
G1 X113.396 Y102.942 E0.02091 ; perimeter
G1 X113.845 Y102.885 E0.02097 ; perimeter
G1 X114.153 Y102.671 E0.01736 ; perimeter
G1 X114.423 Y102.626 E0.01268 ; perimeter
G1 X114.601 Y102.682 E0.00863 ; perimeter
G1 X114.754 Y102.814 E0.00936 ; perimeter
G1 X114.801 Y102.914 E0.00512 ; perimeter
G1 X114.812 Y103.067 E0.00708 ; perimeter
G1 X114.746 Y103.250 E0.00903 ; perimeter
G1 X114.619 Y103.354 E0.00760 ; perimeter
G1 X114.460 Y103.407 E0.00776 ; perimeter
G1 X114.238 Y103.408 E0.01029 ; perimeter
G1 X114.142 Y103.362 E0.00492 ; perimeter
G1 X113.927 Y103.329 E0.01010 ; perimeter
G1 X113.800 Y103.221 E0.00772 ; perimeter
G1 X113.339 Y103.295 E0.02163 ; perimeter
G1 X112.862 Y103.439 E0.02307 ; perimeter
G1 X112.492 Y103.494 E0.01735 ; perimeter
G1 X112.416 Y103.488 E0.00351 ; perimeter
G1 X112.110 Y103.395 E0.01484 ; perimeter
G1 X111.878 Y103.262 E0.01239 ; perimeter
G1 X111.733 Y103.094 E0.01027 ; perimeter
G1 X111.676 Y102.963 E0.00661 ; perimeter
G1 X111.688 Y102.734 E0.01062 ; perimeter
G1 X111.814 Y102.675 F10800.000 ; move inwards before travel
G1 X112.989 Y103.117 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.296487
G1 F2400.000
G1 X112.609 Y103.105 E0.00803 ; infill
G1 X112.013 Y103.050 E0.01262 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.609 Y103.105 E-0.15792 ; wipe and retract
G1 X112.989 Y103.117 E-0.10045 ; wipe and retract
;WIPE_END
G1 E-2.14163 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X115.243 Y105.329 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.396 Y105.242 E0.00818 ; perimeter
G1 X115.526 Y105.228 E0.00603 ; perimeter
G1 X115.721 Y105.294 E0.00955 ; perimeter
G1 X115.867 Y105.474 E0.01075 ; perimeter
G1 X115.892 Y105.646 E0.00803 ; perimeter
G1 X115.887 Y105.770 E0.00574 ; perimeter
G1 X115.791 Y105.960 E0.00987 ; perimeter
G1 X115.711 Y106.015 E0.00449 ; perimeter
G1 X115.523 Y106.057 E0.00893 ; perimeter
G1 X115.351 Y106.018 E0.00817 ; perimeter
G1 X115.256 Y105.964 E0.00508 ; perimeter
G1 X115.143 Y105.803 E0.00910 ; perimeter
G1 X115.126 Y105.614 E0.00879 ; perimeter
G1 X115.131 Y105.561 E0.00248 ; perimeter
G1 X115.208 Y105.378 E0.00922 ; perimeter
G1 X115.411 Y105.382 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.396 Y105.242 E-0.06126 ; wipe and retract
G1 X115.526 Y105.228 E-0.03437 ; wipe and retract
G1 X115.721 Y105.294 E-0.05440 ; wipe and retract
G1 X115.867 Y105.474 E-0.06122 ; wipe and retract
G1 X115.892 Y105.646 E-0.04577 ; wipe and retract
G1 X115.887 Y105.770 E-0.03270 ; wipe and retract
G1 X115.791 Y105.960 E-0.05625 ; wipe and retract
G1 X115.711 Y106.015 E-0.02556 ; wipe and retract
G1 X115.523 Y106.057 E-0.05086 ; wipe and retract
G1 X115.351 Y106.018 E-0.04653 ; wipe and retract
G1 X115.256 Y105.964 E-0.02894 ; wipe and retract
G1 X115.143 Y105.803 E-0.05185 ; wipe and retract
G1 X115.126 Y105.614 E-0.05005 ; wipe and retract
G1 X115.131 Y105.561 E-0.01415 ; wipe and retract
G1 X115.208 Y105.378 E-0.05254 ; wipe and retract
;WIPE_END
G1 E-1.73356 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X115.594 Y111.057 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.689 Y111.089 E0.00463 ; perimeter
G1 X115.807 Y111.203 E0.00763 ; perimeter
G1 X115.881 Y111.435 E0.01127 ; perimeter
G1 X115.875 Y111.605 E0.00791 ; perimeter
G1 X115.775 Y111.826 E0.01123 ; perimeter
G1 X115.678 Y111.905 E0.00577 ; perimeter
G1 X115.544 Y111.942 E0.00644 ; perimeter
G1 X115.416 Y111.933 E0.00595 ; perimeter
G1 X115.347 Y111.903 E0.00349 ; perimeter
G1 X115.234 Y111.795 E0.00724 ; perimeter
G1 X115.157 Y111.548 E0.01196 ; perimeter
G1 X115.168 Y111.353 E0.00905 ; perimeter
G1 X115.241 Y111.183 E0.00856 ; perimeter
G1 X115.306 Y111.111 E0.00449 ; perimeter
G1 X115.419 Y111.061 E0.00575 ; perimeter
G1 X115.534 Y111.058 E0.00530 ; perimeter
G1 X115.630 Y111.150 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.689 Y111.089 E-0.04163 ; wipe and retract
G1 X115.807 Y111.203 E-0.04349 ; wipe and retract
G1 X115.881 Y111.435 E-0.06419 ; wipe and retract
G1 X115.875 Y111.605 E-0.04504 ; wipe and retract
G1 X115.775 Y111.826 E-0.06398 ; wipe and retract
G1 X115.678 Y111.905 E-0.03287 ; wipe and retract
G1 X115.544 Y111.942 E-0.03667 ; wipe and retract
G1 X115.416 Y111.933 E-0.03389 ; wipe and retract
G1 X115.347 Y111.903 E-0.01988 ; wipe and retract
G1 X115.234 Y111.795 E-0.04127 ; wipe and retract
G1 X115.157 Y111.548 E-0.06816 ; wipe and retract
G1 X115.168 Y111.353 E-0.05158 ; wipe and retract
G1 X115.241 Y111.183 E-0.04879 ; wipe and retract
G1 X115.306 Y111.111 E-0.02559 ; wipe and retract
G1 X115.419 Y111.061 E-0.03278 ; wipe and retract
G1 X115.534 Y111.058 E-0.03021 ; wipe and retract
;WIPE_END
G1 E-1.71999 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X115.310 Y114.697 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.405 Y114.708 E0.00441 ; perimeter
G1 X115.497 Y114.745 E0.00459 ; perimeter
G1 X115.565 Y114.808 E0.00431 ; perimeter
G1 X115.633 Y114.922 E0.00615 ; perimeter
G1 X115.663 Y115.046 E0.00591 ; perimeter
G1 X115.652 Y115.195 E0.00691 ; perimeter
G1 X115.627 Y115.281 E0.00415 ; perimeter
G1 X115.572 Y115.365 E0.00469 ; perimeter
G1 X115.121 Y115.760 E0.02775 ; perimeter
G1 X114.874 Y115.933 E0.01398 ; perimeter
G1 X114.694 Y116.004 E0.00897 ; perimeter
G1 X114.488 Y116.015 E0.00954 ; perimeter
G1 X114.403 Y115.992 E0.00409 ; perimeter
G1 X114.191 Y115.844 E0.01195 ; perimeter
G1 X114.110 Y115.599 E0.01193 ; perimeter
G1 X114.146 Y115.421 E0.00846 ; perimeter
G1 X114.343 Y115.287 E0.01100 ; perimeter
G1 X114.517 Y115.121 E0.01114 ; perimeter
G1 X114.926 Y114.822 E0.02348 ; perimeter
G1 X115.150 Y114.711 E0.01159 ; perimeter
G1 X115.250 Y114.702 E0.00464 ; perimeter
G1 X115.360 Y114.778 F10800.000 ; move inwards before travel
G1 X115.255 Y115.108 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.400295
G1 F2400.000
G1 X114.612 Y115.596 E0.02401 ; infill
;WIDTH:0.379591
G1 X114.585 Y115.608 E0.00080 ; infill
;WIDTH:0.36398
G1 X114.395 Y115.671 E0.00535 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.585 Y115.608 E-0.05285 ; wipe and retract
;WIPE_END
G1 E-2.34715 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 X112.102 Y116.078 ; move to first perimeter point
G1 Z11.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.994 Y116.122 E0.00541 ; perimeter
G1 X111.868 Y116.139 E0.00586 ; perimeter
G1 X111.712 Y116.121 E0.00728 ; perimeter
G1 X111.550 Y116.045 E0.00831 ; perimeter
G1 X111.460 Y115.903 E0.00779 ; perimeter
G1 X111.438 Y115.806 E0.00460 ; perimeter
G1 X111.454 Y115.630 E0.00821 ; perimeter
G1 X111.502 Y115.530 E0.00511 ; perimeter
G1 X111.561 Y115.473 E0.00379 ; perimeter
G1 X111.686 Y115.416 E0.00636 ; perimeter
G1 X111.952 Y115.411 E0.01233 ; perimeter
G1 X112.118 Y115.471 E0.00819 ; perimeter
G1 X112.180 Y115.527 E0.00386 ; perimeter
G1 X112.233 Y115.626 E0.00523 ; perimeter
G1 X112.249 Y115.807 E0.00840 ; perimeter
G1 X112.224 Y115.926 E0.00562 ; perimeter
G1 X112.147 Y116.038 E0.00630 ; perimeter
G1 X111.996 Y116.029 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:12
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;12
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.994 Y116.122 E-0.04611 ; wipe and retract
G1 X111.868 Y116.139 E-0.03338 ; wipe and retract
G1 X111.712 Y116.121 E-0.04147 ; wipe and retract
G1 X111.550 Y116.045 E-0.04736 ; wipe and retract
G1 X111.460 Y115.903 E-0.04437 ; wipe and retract
G1 X111.438 Y115.806 E-0.02621 ; wipe and retract
G1 X111.454 Y115.630 E-0.04677 ; wipe and retract
G1 X111.502 Y115.530 E-0.02913 ; wipe and retract
G1 X111.561 Y115.473 E-0.02160 ; wipe and retract
G1 X111.686 Y115.416 E-0.03622 ; wipe and retract
G1 X111.952 Y115.411 E-0.07022 ; wipe and retract
G1 X112.118 Y115.471 E-0.04668 ; wipe and retract
G1 X112.180 Y115.527 E-0.02197 ; wipe and retract
G1 X112.233 Y115.626 E-0.02978 ; wipe and retract
G1 X112.249 Y115.807 E-0.04783 ; wipe and retract
G1 X112.224 Y115.926 E-0.03203 ; wipe and retract
G1 X112.147 Y116.038 E-0.03588 ; wipe and retract
;WIPE_END
G1 E-1.74300 F2400.000 ; retract
G1 Z11.875 F10800.000 ; lift Z
G1 Z12.000 ; move to next layer (59)
;AFTER_LAYER_CHANGE
;12
G1 Z12.075 ; lift Z
G1 X105.023 Y107.009 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.674 Y106.913 E0.01227 ; perimeter
G1 X104.742 Y106.913 E0.00232 ; perimeter
G1 X104.968 Y106.986 E0.00804 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.674 Y106.913 E-0.08010 ; wipe and retract
G1 X104.742 Y106.913 E-0.01808 ; wipe and retract
G1 X104.968 Y106.986 E-0.06268 ; wipe and retract
;WIPE_END
G1 E-2.23914 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X106.530 Y108.987 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.540 Y109.079 E0.00311 ; perimeter
G1 X106.497 Y109.212 E0.00475 ; perimeter
G1 X106.518 Y109.046 E0.00567 ; perimeter
G1 X106.044 Y108.266 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.767 Y107.941 E0.01974 ; perimeter
G1 X105.637 Y107.876 E0.00676 ; perimeter
G1 X105.307 Y107.632 E0.01900 ; perimeter
G1 X105.095 Y107.588 E0.01004 ; perimeter
G1 X104.871 Y107.468 E0.01177 ; perimeter
G1 X104.440 Y107.349 E0.02071 ; perimeter
G1 X104.231 Y107.198 E0.01197 ; perimeter
G1 X104.063 Y107.116 E0.00864 ; perimeter
G1 X103.980 Y107.020 E0.00588 ; perimeter
G1 X103.669 Y106.813 E0.01728 ; perimeter
G1 X102.791 Y106.571 E0.04222 ; perimeter
G1 X102.598 Y106.426 E0.01116 ; perimeter
G1 X102.431 Y106.217 E0.01239 ; perimeter
G1 X102.360 Y106.070 E0.00760 ; perimeter
G1 X102.088 Y105.698 E0.02135 ; perimeter
G1 X101.717 Y105.250 E0.02695 ; perimeter
G1 X101.598 Y105.020 E0.01197 ; perimeter
G1 X101.607 Y104.959 E0.00287 ; perimeter
G1 X101.559 Y104.565 E0.01838 ; perimeter
G1 X101.628 Y104.468 E0.00549 ; perimeter
G1 X101.803 Y104.443 E0.00819 ; perimeter
G1 X101.883 Y104.483 E0.00415 ; perimeter
G1 X102.075 Y104.506 E0.00893 ; perimeter
G1 X102.190 Y104.579 E0.00631 ; perimeter
G1 X102.382 Y104.773 E0.01263 ; perimeter
G1 X102.702 Y105.210 E0.02514 ; perimeter
G1 X103.034 Y105.573 E0.02277 ; perimeter
G1 X103.354 Y105.794 E0.01800 ; perimeter
G1 X103.839 Y106.012 E0.02461 ; perimeter
G1 X104.267 Y106.264 E0.02301 ; perimeter
G1 X104.419 Y106.387 E0.00906 ; perimeter
G1 X104.672 Y106.431 E0.01192 ; perimeter
G1 X104.818 Y106.431 E0.00677 ; perimeter
G1 X105.210 Y106.557 E0.01907 ; perimeter
G1 X105.532 Y106.762 E0.01767 ; perimeter
G1 X106.056 Y107.181 E0.03108 ; perimeter
G1 X106.289 Y107.345 E0.01318 ; perimeter
G1 X106.677 Y107.680 E0.02378 ; perimeter
G1 X106.898 Y108.000 E0.01801 ; perimeter
G1 X107.000 Y108.289 E0.01416 ; perimeter
G1 X106.984 Y108.438 E0.00695 ; perimeter
G1 X107.017 Y108.630 E0.00902 ; perimeter
G1 X106.998 Y108.830 E0.00931 ; perimeter
G1 X107.031 Y109.128 E0.01391 ; perimeter
G1 X106.997 Y109.233 E0.00508 ; perimeter
G1 X107.064 Y109.507 E0.01307 ; perimeter
G1 X107.582 Y110.889 E0.06836 ; perimeter
G1 X107.823 Y111.421 E0.02708 ; perimeter
G1 X107.946 Y111.550 E0.00824 ; perimeter
G1 X108.185 Y111.957 E0.02187 ; perimeter
G1 X108.240 Y112.181 E0.01067 ; perimeter
G1 X108.236 Y112.228 E0.00219 ; perimeter
G1 X108.181 Y112.426 E0.00953 ; perimeter
G1 X108.079 Y112.500 E0.00585 ; perimeter
G1 X107.816 Y112.436 E0.01253 ; perimeter
G1 X107.663 Y112.428 E0.00711 ; perimeter
G1 X107.360 Y112.201 E0.01755 ; perimeter
G1 X107.179 Y112.197 E0.00837 ; perimeter
G1 X107.084 Y112.036 E0.00867 ; perimeter
G1 X107.081 Y111.890 E0.00678 ; perimeter
G1 X106.995 Y111.334 E0.02603 ; perimeter
G1 X106.661 Y110.286 E0.05096 ; perimeter
G1 X106.471 Y110.014 E0.01538 ; perimeter
G1 X106.321 Y109.710 E0.01567 ; perimeter
G1 X106.159 Y109.584 E0.00950 ; perimeter
G1 X106.047 Y109.401 E0.00996 ; perimeter
G1 X105.959 Y109.329 E0.00528 ; perimeter
G1 X105.948 Y109.143 E0.00863 ; perimeter
G1 X105.961 Y109.091 E0.00249 ; perimeter
G1 X106.035 Y109.003 E0.00531 ; perimeter
G1 X106.107 Y108.647 E0.01682 ; perimeter
G1 X106.053 Y108.325 E0.01514 ; perimeter
G1 X106.263 Y107.931 F10800.000 ; move inwards before travel
G1 X106.410 Y108.041 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.427685
G1 F2400.000
G1 X106.770 Y108.673 E0.02326 ; infill
G1 X106.580 Y108.748 F10800.000 ; move to first infill point
;WIDTH:0.460736
G1 F2400.000
G1 X106.527 Y108.344 E0.01416 ; infill
G1 X106.371 Y107.734 E0.02188 ; infill
G1 X106.410 Y108.041 F10800.000 ; move to first infill point
;WIDTH:0.419351
G1 F2400.000
G1 X106.200 Y107.813 E0.00971 ; infill
;WIDTH:0.385981
G1 X106.045 Y107.657 E0.00627 ; infill
;WIDTH:0.352613
G1 X105.509 Y107.270 E0.01705 ; infill
G1 X105.233 Y107.131 E0.00795 ; infill
G1 X104.357 Y106.992 F10800.000 ; move to first infill point
;WIDTH:0.358813
G1 F2400.000
G1 X104.291 Y106.769 E0.00610 ; infill
G1 X104.250 Y106.742 E0.00128 ; infill
;WIDTH:0.332634
G1 X103.852 Y106.469 E0.01163 ; infill
G1 X103.649 Y106.379 E0.00535 ; infill
;WIDTH:0.427752
G1 X103.006 Y106.135 E0.02201 ; infill
G1 X102.817 Y105.974 E0.00792 ; infill
G1 X103.153 Y106.421 F10800.000 ; move to first infill point
;WIDTH:0.426727
G1 F2400.000
G1 X102.739 Y105.880 E0.02175 ; infill
;WIDTH:0.409402
G1 X102.711 Y105.840 E0.00149 ; infill
;WIDTH:0.398198
G1 X102.557 Y105.653 E0.00715 ; infill
;WIDTH:0.371828
G1 X102.404 Y105.466 E0.00662 ; infill
;WIDTH:0.345457
G1 X102.000 Y104.944 E0.01661 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.404 Y105.466 E-0.17421 ; wipe and retract
;WIPE_END
G1 E-2.22579 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X106.653 Y109.512 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.312501
G1 F2400.000
G1 X106.789 Y109.826 E0.00767 ; infill
;WIDTH:0.213048
G1 X106.959 Y110.153 E0.00522 ; infill
;WIDTH:0.256743
G1 X107.261 Y111.025 E0.01642 ; infill
;WIDTH:0.287844
G1 X107.351 Y111.260 E0.00512 ; infill
;WIDTH:0.3228
G1 X107.388 Y111.384 E0.00300 ; infill
;WIDTH:0.357757
G1 X107.425 Y111.507 E0.00337 ; infill
;WIDTH:0.392715
G1 X107.462 Y111.630 E0.00375 ; infill
;WIDTH:0.419944
G1 X107.659 Y112.129 E0.01681 ; infill
G1 X107.330 Y111.959 F10800.000 ; move to first infill point
;WIDTH:0.260211
G1 F2400.000
G1 X107.429 Y111.852 E0.00264 ; infill
;WIDTH:0.303574
G1 X107.448 Y111.831 E0.00061 ; infill
;WIDTH:0.344932
G1 X107.466 Y111.813 E0.00063 ; infill
;WIDTH:0.386291
G1 X107.484 Y111.796 E0.00072 ; infill
;WIDTH:0.427649
G1 X107.502 Y111.779 E0.00080 ; infill
;WIDTH:0.450058
G1 X107.521 Y111.762 E0.00085 ; infill
G1 X107.571 Y111.801 E0.00217 ; infill
G1 X107.993 Y112.185 E0.01929 ; infill
G1 X107.942 Y112.219 F10800.000 ; move to first infill point
;WIDTH:0.362716
G1 F2400.000
G1 X107.254 Y111.432 E0.02778 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.942 Y112.219 E-0.27566 ; wipe and retract
;WIPE_END
G1 E-2.12434 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X99.444 Y96.358 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X99.462 Y96.186 E0.00587 ; perimeter
G1 X99.514 Y96.261 E0.00311 ; perimeter
G1 X99.482 Y96.311 E0.00201 ; perimeter
G1 X100.012 Y96.297 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.935 Y96.518 E0.01086 ; perimeter
G1 X99.786 Y96.702 E0.01094 ; perimeter
G1 X99.736 Y96.941 E0.01134 ; perimeter
G1 X99.657 Y97.143 E0.01006 ; perimeter
G1 X99.587 Y97.660 E0.02416 ; perimeter
G1 X99.538 Y97.875 E0.01022 ; perimeter
G1 X99.519 Y98.433 E0.02586 ; perimeter
G1 X99.597 Y98.713 E0.01344 ; perimeter
G1 X99.614 Y98.949 E0.01097 ; perimeter
G1 X99.658 Y99.174 E0.01059 ; perimeter
G1 X99.642 Y99.272 E0.00462 ; perimeter
G1 X99.668 Y99.835 E0.02608 ; perimeter
G1 X99.828 Y100.326 E0.02396 ; perimeter
G1 X99.987 Y100.563 E0.01320 ; perimeter
G1 X100.149 Y100.946 E0.01928 ; perimeter
G1 X100.224 Y101.022 E0.00494 ; perimeter
G1 X100.469 Y101.440 E0.02243 ; perimeter
G1 X100.738 Y101.815 E0.02139 ; perimeter
G1 X100.796 Y101.974 E0.00783 ; perimeter
G1 X100.890 Y102.099 E0.00724 ; perimeter
G1 X100.906 Y102.344 E0.01139 ; perimeter
G1 X100.961 Y102.460 E0.00594 ; perimeter
G1 X100.967 Y102.697 E0.01102 ; perimeter
G1 X100.913 Y102.967 E0.01273 ; perimeter
G1 X100.859 Y103.035 E0.00400 ; perimeter
G1 X100.684 Y103.040 E0.00812 ; perimeter
G1 X100.359 Y102.842 E0.01765 ; perimeter
G1 X100.134 Y102.527 E0.01790 ; perimeter
G1 X99.906 Y102.056 E0.02426 ; perimeter
G1 X99.891 Y101.952 E0.00485 ; perimeter
G1 X99.766 Y101.579 E0.01823 ; perimeter
G1 X99.679 Y101.197 E0.01815 ; perimeter
G1 X99.624 Y100.788 E0.01910 ; perimeter
G1 X99.386 Y99.870 E0.04394 ; perimeter
G1 X99.179 Y99.625 E0.01485 ; perimeter
G1 X99.112 Y99.459 E0.00831 ; perimeter
G1 X98.816 Y99.071 E0.02257 ; perimeter
G1 X98.727 Y98.801 E0.01321 ; perimeter
G1 X98.686 Y98.457 E0.01605 ; perimeter
G1 X98.704 Y98.240 E0.01007 ; perimeter
G1 X98.743 Y98.114 E0.00610 ; perimeter
G1 X98.910 Y97.173 E0.04428 ; perimeter
G1 X98.967 Y96.529 E0.02997 ; perimeter
G1 X98.959 Y96.273 E0.01186 ; perimeter
G1 X99.022 Y95.891 E0.01791 ; perimeter
G1 X99.080 Y95.739 E0.00757 ; perimeter
G1 X99.193 Y95.611 E0.00788 ; perimeter
G1 X99.315 Y95.564 E0.00608 ; perimeter
G1 X99.445 Y95.566 E0.00602 ; perimeter
G1 X99.546 Y95.598 E0.00489 ; perimeter
G1 X99.842 Y95.866 E0.01852 ; perimeter
G1 X99.985 Y96.114 E0.01325 ; perimeter
G1 X100.004 Y96.237 E0.00579 ; perimeter
G1 X99.799 Y96.393 F10800.000 ; move inwards before travel
G1 X99.285 Y97.129 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301318
G1 F2400.000
G1 X99.168 Y97.840 E0.01548 ; infill
G1 X99.111 Y98.318 E0.01034 ; infill
G1 X99.110 Y98.509 E0.00410 ; infill
;WIDTH:0.420964
G1 X99.270 Y99.272 E0.02450 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.110 Y98.509 E-0.20570 ; wipe and retract
;WIPE_END
G1 E-2.19430 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X100.285 Y101.872 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.363959
G1 F2400.000
G1 X100.273 Y101.847 E0.00075 ; infill
;WIDTH:0.353089
G1 X100.221 Y101.745 E0.00296 ; infill
;WIDTH:0.31863
G1 X100.169 Y101.642 E0.00263 ; infill
;WIDTH:0.284171
G1 X100.097 Y101.486 E0.00344 ; infill
;WIDTH:0.248038
G1 X100.018 Y101.286 E0.00368 ; infill
;WIDTH:0.201529
G1 X99.938 Y101.085 E0.00285 ; infill
G1 X99.960 Y101.346 F10800.000 ; move to first infill point
;WIDTH:0.398137
G1 F2400.000
G1 X100.359 Y102.015 E0.02299 ; infill
G1 X100.440 Y102.198 E0.00591 ; infill
;WIDTH:0.411091
G1 X100.474 Y102.253 E0.00200 ; infill
G1 X100.592 Y102.702 E0.01419 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.474 Y102.253 E-0.12236 ; wipe and retract
G1 X100.440 Y102.198 E-0.01724 ; wipe and retract
;WIPE_END
G1 E-2.26040 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X101.784 Y95.751 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.698 Y95.666 E0.00560 ; perimeter
G1 X101.607 Y95.523 E0.00789 ; perimeter
G1 X101.536 Y95.227 E0.01409 ; perimeter
G1 X101.591 Y95.019 E0.00996 ; perimeter
G1 X101.638 Y94.936 E0.00439 ; perimeter
G1 X101.719 Y94.887 E0.00443 ; perimeter
G1 X101.869 Y94.849 E0.00714 ; perimeter
G1 X102.064 Y94.860 E0.00908 ; perimeter
G1 X102.210 Y94.923 E0.00736 ; perimeter
G1 X102.386 Y95.103 E0.01167 ; perimeter
G1 X102.427 Y95.195 E0.00467 ; perimeter
G1 X102.417 Y95.233 E0.00183 ; perimeter
G1 X102.476 Y95.446 E0.01024 ; perimeter
G1 X102.418 Y95.616 E0.00831 ; perimeter
G1 X102.269 Y95.754 E0.00942 ; perimeter
G1 X102.002 Y95.799 E0.01256 ; perimeter
G1 X101.843 Y95.764 E0.00753 ; perimeter
G1 X101.784 Y95.630 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.698 Y95.666 E-0.04610 ; wipe and retract
G1 X101.607 Y95.523 E-0.04493 ; wipe and retract
G1 X101.536 Y95.227 E-0.08025 ; wipe and retract
G1 X101.591 Y95.019 E-0.05674 ; wipe and retract
G1 X101.638 Y94.936 E-0.02502 ; wipe and retract
G1 X101.719 Y94.887 E-0.02521 ; wipe and retract
G1 X101.869 Y94.849 E-0.04069 ; wipe and retract
G1 X102.064 Y94.860 E-0.05170 ; wipe and retract
G1 X102.210 Y94.923 E-0.04193 ; wipe and retract
G1 X102.386 Y95.103 E-0.06649 ; wipe and retract
G1 X102.427 Y95.195 E-0.02660 ; wipe and retract
G1 X102.417 Y95.233 E-0.01041 ; wipe and retract
G1 X102.476 Y95.446 E-0.05835 ; wipe and retract
G1 X102.418 Y95.616 E-0.04735 ; wipe and retract
G1 X102.269 Y95.754 E-0.05366 ; wipe and retract
G1 X102.002 Y95.799 E-0.07156 ; wipe and retract
G1 X101.843 Y95.764 E-0.04291 ; wipe and retract
;WIPE_END
G1 E-1.61009 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X103.953 Y95.808 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.082 Y95.431 E0.01848 ; perimeter
G1 X104.136 Y95.357 E0.00423 ; perimeter
G1 X104.362 Y95.211 E0.01245 ; perimeter
G1 X104.585 Y95.190 E0.01039 ; perimeter
G1 X104.670 Y95.206 E0.00399 ; perimeter
G1 X104.942 Y95.336 E0.01397 ; perimeter
G1 X105.166 Y95.620 E0.01676 ; perimeter
G1 X105.154 Y95.775 E0.00719 ; perimeter
G1 X104.804 Y96.103 E0.02219 ; perimeter
G1 X104.734 Y96.130 E0.00348 ; perimeter
G1 X104.426 Y96.132 E0.01429 ; perimeter
G1 X104.287 Y96.176 E0.00674 ; perimeter
G1 X104.217 Y96.155 E0.00338 ; perimeter
G1 X104.041 Y96.077 E0.00895 ; perimeter
G1 X103.988 Y96.016 E0.00374 ; perimeter
G1 X103.963 Y95.867 E0.00700 ; perimeter
G1 X104.319 Y95.650 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.082 Y95.431 E-0.11941 ; wipe and retract
G1 X104.136 Y95.357 E-0.02409 ; wipe and retract
G1 X104.362 Y95.211 E-0.07093 ; wipe and retract
G1 X104.585 Y95.190 E-0.05918 ; wipe and retract
G1 X104.670 Y95.206 E-0.02272 ; wipe and retract
G1 X104.942 Y95.336 E-0.07960 ; wipe and retract
G1 X105.166 Y95.620 E-0.09546 ; wipe and retract
G1 X105.154 Y95.775 E-0.04098 ; wipe and retract
G1 X104.804 Y96.103 E-0.12639 ; wipe and retract
G1 X104.734 Y96.130 E-0.01984 ; wipe and retract
G1 X104.426 Y96.132 E-0.08143 ; wipe and retract
G1 X104.287 Y96.176 E-0.03837 ; wipe and retract
G1 X104.217 Y96.155 E-0.01928 ; wipe and retract
G1 X104.041 Y96.077 E-0.05096 ; wipe and retract
G1 X103.988 Y96.016 E-0.02128 ; wipe and retract
G1 X103.963 Y95.867 E-0.03987 ; wipe and retract
;WIPE_END
G1 E-1.49021 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X107.210 Y97.708 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.300 Y97.643 E0.00375 ; perimeter
G1 X107.447 Y97.809 E0.00752 ; perimeter
G1 X107.263 Y97.735 E0.00672 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.300 Y97.643 E-0.02639 ; wipe and retract
G1 X107.447 Y97.809 E-0.05860 ; wipe and retract
G1 X107.263 Y97.735 E-0.05239 ; wipe and retract
;WIPE_END
G1 E-2.26262 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X109.223 Y100.011 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.960 Y99.793 E0.01582 ; perimeter
G1 X108.888 Y99.673 E0.00647 ; perimeter
G1 X108.603 Y99.487 E0.01576 ; perimeter
G1 X108.448 Y99.324 E0.01043 ; perimeter
G1 X108.282 Y99.099 E0.01297 ; perimeter
G1 X108.216 Y98.927 E0.00851 ; perimeter
G1 X107.859 Y98.533 E0.02464 ; perimeter
G1 X107.356 Y98.291 E0.02583 ; perimeter
G1 X106.957 Y98.133 E0.01988 ; perimeter
G1 X106.711 Y97.944 E0.01437 ; perimeter
G1 X106.648 Y97.795 E0.00749 ; perimeter
G1 X106.662 Y97.648 E0.00685 ; perimeter
G1 X106.703 Y97.522 E0.00614 ; perimeter
G1 X106.866 Y97.370 E0.01032 ; perimeter
G1 X106.926 Y97.280 E0.00501 ; perimeter
G1 X107.237 Y97.144 E0.01570 ; perimeter
G1 X107.375 Y97.141 E0.00642 ; perimeter
G1 X107.562 Y97.222 E0.00943 ; perimeter
G1 X107.773 Y97.435 E0.01389 ; perimeter
G1 X107.920 Y97.641 E0.01171 ; perimeter
G1 X108.250 Y98.037 E0.02390 ; perimeter
G1 X108.709 Y98.470 E0.02920 ; perimeter
G1 X108.822 Y98.508 E0.00553 ; perimeter
G1 X109.038 Y98.725 E0.01421 ; perimeter
G1 X109.142 Y98.925 E0.01045 ; perimeter
G1 X109.269 Y99.493 E0.02693 ; perimeter
G1 X109.255 Y99.547 E0.00258 ; perimeter
G1 X109.299 Y99.864 E0.01483 ; perimeter
G1 X109.439 Y100.008 E0.00928 ; perimeter
G1 X109.577 Y100.300 E0.01499 ; perimeter
G1 X109.811 Y100.436 E0.01252 ; perimeter
G1 X109.863 Y100.515 E0.00439 ; perimeter
G1 X110.284 Y100.742 E0.02215 ; perimeter
G1 X110.342 Y100.788 E0.00344 ; perimeter
G1 X110.520 Y101.025 E0.01376 ; perimeter
G1 X110.590 Y101.318 E0.01392 ; perimeter
G1 X110.546 Y101.419 E0.00512 ; perimeter
G1 X110.520 Y101.584 E0.00773 ; perimeter
G1 X110.436 Y101.666 E0.00543 ; perimeter
G1 X110.228 Y101.704 E0.00980 ; perimeter
G1 X109.912 Y101.623 E0.01510 ; perimeter
G1 X109.823 Y101.551 E0.00531 ; perimeter
G1 X109.700 Y101.404 E0.00890 ; perimeter
G1 X109.552 Y101.076 E0.01666 ; perimeter
G1 X109.468 Y100.832 E0.01196 ; perimeter
G1 X109.430 Y100.598 E0.01099 ; perimeter
G1 X109.246 Y100.232 E0.01897 ; perimeter
G1 X109.229 Y100.071 E0.00751 ; perimeter
G1 X109.339 Y99.690 F10800.000 ; move inwards before travel
G1 X108.971 Y99.271 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.274108
G1 F2400.000
G1 X108.520 Y98.762 E0.01307 ; infill
;WIDTH:0.246551
G1 X108.496 Y98.734 E0.00062 ; infill
;WIDTH:0.236368
G1 X108.059 Y98.288 E0.01005 ; infill
;WIDTH:0.190679
G1 X107.627 Y97.970 E0.00659 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.059 Y98.288 E-0.14154 ; wipe and retract
;WIPE_END
G1 E-2.25846 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X109.727 Y100.844 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.143321
G1 F2400.000
G1 X110.292 Y101.452 E0.00693 ; infill
G1 X111.789 Y102.655 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.814 Y102.603 E0.00266 ; perimeter
G1 X112.055 Y102.499 E0.01218 ; perimeter
G1 X112.277 Y102.496 E0.01025 ; perimeter
G1 X112.743 Y102.716 E0.02391 ; perimeter
G1 X113.134 Y102.771 E0.01829 ; perimeter
G1 X113.380 Y102.843 E0.01186 ; perimeter
G1 X114.004 Y102.742 E0.02927 ; perimeter
G1 X114.086 Y102.686 E0.00463 ; perimeter
G1 X114.321 Y102.644 E0.01105 ; perimeter
G1 X114.578 Y102.715 E0.01236 ; perimeter
G1 X114.701 Y102.840 E0.00812 ; perimeter
G1 X114.743 Y102.929 E0.00457 ; perimeter
G1 X114.753 Y103.066 E0.00638 ; perimeter
G1 X114.696 Y103.235 E0.00824 ; perimeter
G1 X114.536 Y103.373 E0.00980 ; perimeter
G1 X114.415 Y103.413 E0.00589 ; perimeter
G1 X114.064 Y103.434 E0.01628 ; perimeter
G1 X113.601 Y103.390 E0.02154 ; perimeter
G1 X113.315 Y103.443 E0.01348 ; perimeter
G1 X113.203 Y103.435 E0.00519 ; perimeter
G1 X112.880 Y103.502 E0.01530 ; perimeter
G1 X112.666 Y103.513 E0.00992 ; perimeter
G1 X112.236 Y103.443 E0.02017 ; perimeter
G1 X111.880 Y103.220 E0.01948 ; perimeter
G1 X111.845 Y103.175 E0.00263 ; perimeter
G1 X111.742 Y102.908 E0.01325 ; perimeter
G1 X111.758 Y102.701 E0.00962 ; perimeter
G1 X111.844 Y102.640 F10800.000 ; move inwards before travel
G1 X112.046 Y102.762 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.399466
G1 F2400.000
G1 X112.207 Y102.931 E0.00691 ; infill
G1 X112.386 Y103.026 E0.00600 ; infill
G1 X112.600 Y103.094 E0.00667 ; infill
;WIDTH:0.293506
G1 X112.830 Y103.118 E0.00482 ; infill
G1 X113.061 Y103.110 E0.00481 ; infill
G1 X113.171 Y103.115 F10800.000 ; move to first infill point
;WIDTH:0.136735
G1 F2400.000
G1 X113.350 Y103.139 E0.00141 ; infill
G1 X113.595 Y103.100 E0.00194 ; infill
;WIDTH:0.177183
G1 X113.754 Y103.095 E0.00177 ; infill
;WIDTH:0.217633
G1 X113.912 Y103.090 E0.00230 ; infill
;WIDTH:0.262391
G1 X114.114 Y103.080 E0.00368 ; infill
;WIDTH:0.278907
G1 X114.506 Y102.991 E0.00789 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.114 Y103.080 E-0.10614 ; wipe and retract
;WIPE_END
G1 E-2.29386 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X115.391 Y105.224 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.526 Y105.210 E0.00626 ; perimeter
G1 X115.712 Y105.261 E0.00893 ; perimeter
G1 X115.870 Y105.450 E0.01140 ; perimeter
G1 X115.892 Y105.582 E0.00623 ; perimeter
G1 X115.884 Y105.757 E0.00808 ; perimeter
G1 X115.789 Y105.936 E0.00941 ; perimeter
G1 X115.712 Y105.989 E0.00435 ; perimeter
G1 X115.525 Y106.032 E0.00885 ; perimeter
G1 X115.367 Y106.002 E0.00748 ; perimeter
G1 X115.256 Y105.939 E0.00590 ; perimeter
G1 X115.162 Y105.816 E0.00717 ; perimeter
G1 X115.138 Y105.554 E0.01218 ; perimeter
G1 X115.189 Y105.388 E0.00806 ; perimeter
G1 X115.240 Y105.314 E0.00417 ; perimeter
G1 X115.336 Y105.246 E0.00542 ; perimeter
G1 X115.490 Y105.316 F10800.000 ; move inwards before travel
G1 X115.515 Y105.650 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.306287
G1 F2400.000
G1 X115.520 Y105.609 E0.00090 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.515 Y105.650 E-0.01090 ; wipe and retract
;WIPE_END
G1 E-2.38910 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X115.415 Y111.136 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.594 Y111.131 E0.00832 ; perimeter
G1 X115.702 Y111.169 E0.00529 ; perimeter
G1 X115.792 Y111.248 E0.00555 ; perimeter
G1 X115.865 Y111.441 E0.00957 ; perimeter
G1 X115.881 Y111.520 E0.00371 ; perimeter
G1 X115.866 Y111.707 E0.00869 ; perimeter
G1 X115.771 Y111.906 E0.01023 ; perimeter
G1 X115.679 Y111.980 E0.00547 ; perimeter
G1 X115.546 Y112.016 E0.00635 ; perimeter
G1 X115.431 Y112.008 E0.00536 ; perimeter
G1 X115.322 Y111.963 E0.00545 ; perimeter
G1 X115.233 Y111.869 E0.00602 ; perimeter
G1 X115.157 Y111.625 E0.01181 ; perimeter
G1 X115.169 Y111.431 E0.00900 ; perimeter
G1 X115.248 Y111.251 E0.00912 ; perimeter
G1 X115.311 Y111.181 E0.00439 ; perimeter
G1 X115.359 Y111.160 E0.00244 ; perimeter
G1 X115.536 Y111.268 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.594 Y111.131 E-0.06240 ; wipe and retract
G1 X115.702 Y111.169 E-0.03015 ; wipe and retract
G1 X115.792 Y111.248 E-0.03162 ; wipe and retract
G1 X115.865 Y111.441 E-0.05453 ; wipe and retract
G1 X115.881 Y111.520 E-0.02115 ; wipe and retract
G1 X115.866 Y111.707 E-0.04951 ; wipe and retract
G1 X115.771 Y111.906 E-0.05831 ; wipe and retract
G1 X115.679 Y111.980 E-0.03115 ; wipe and retract
G1 X115.546 Y112.016 E-0.03616 ; wipe and retract
G1 X115.431 Y112.008 E-0.03054 ; wipe and retract
G1 X115.322 Y111.963 E-0.03106 ; wipe and retract
G1 X115.233 Y111.869 E-0.03432 ; wipe and retract
G1 X115.157 Y111.625 E-0.06729 ; wipe and retract
G1 X115.169 Y111.431 E-0.05130 ; wipe and retract
G1 X115.248 Y111.251 E-0.05194 ; wipe and retract
G1 X115.311 Y111.181 E-0.02500 ; wipe and retract
G1 X115.359 Y111.160 E-0.01390 ; wipe and retract
;WIPE_END
G1 E-1.71969 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X115.422 Y114.699 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.507 Y114.734 E0.00431 ; perimeter
G1 X115.576 Y114.797 E0.00430 ; perimeter
G1 X115.647 Y114.920 E0.00659 ; perimeter
G1 X115.677 Y115.041 E0.00578 ; perimeter
G1 X115.637 Y115.268 E0.01066 ; perimeter
G1 X115.577 Y115.358 E0.00504 ; perimeter
G1 X115.097 Y115.778 E0.02954 ; perimeter
G1 X114.864 Y115.941 E0.01317 ; perimeter
G1 X114.701 Y116.004 E0.00811 ; perimeter
G1 X114.576 Y116.010 E0.00576 ; perimeter
G1 X114.481 Y115.983 E0.00457 ; perimeter
G1 X114.266 Y115.854 E0.01162 ; perimeter
G1 X114.216 Y115.756 E0.00510 ; perimeter
G1 X114.180 Y115.603 E0.00732 ; perimeter
G1 X114.232 Y115.410 E0.00921 ; perimeter
G1 X114.489 Y115.161 E0.01659 ; perimeter
G1 X114.668 Y115.040 E0.01003 ; perimeter
G1 X114.960 Y114.796 E0.01762 ; perimeter
G1 X115.150 Y114.702 E0.00981 ; perimeter
G1 X115.362 Y114.692 E0.00983 ; perimeter
G1 X115.452 Y114.787 F10800.000 ; move inwards before travel
G1 X115.266 Y115.095 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.367637
G1 F2400.000
G1 X114.627 Y115.595 E0.02190 ; infill
G1 X114.625 Y115.616 E0.00057 ; infill
;WIDTH:0.33874
G1 X114.624 Y115.637 E0.00052 ; infill
;WIDTH:0.300736
G1 X114.608 Y115.701 E0.00140 ; infill
;WIDTH:0.261637
G1 X114.592 Y115.764 E0.00119 ; infill
G1 X114.438 Y115.652 F10800.000 ; move to first infill point
;WIDTH:0.292402
G1 F2400.000
G1 X115.251 Y115.323 E0.01819 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.438 Y115.652 E-0.23138 ; wipe and retract
;WIPE_END
G1 E-2.16862 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 X112.154 Y115.537 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.203 Y115.639 E0.00526 ; perimeter
G1 X112.217 Y115.800 E0.00747 ; perimeter
G1 X112.193 Y115.917 E0.00557 ; perimeter
G1 X112.132 Y116.022 E0.00562 ; perimeter
G1 X112.064 Y116.081 E0.00416 ; perimeter
G1 X111.983 Y116.117 E0.00413 ; perimeter
G1 X111.835 Y116.139 E0.00690 ; perimeter
G1 X111.700 Y116.126 E0.00627 ; perimeter
G1 X111.513 Y116.040 E0.00958 ; perimeter
G1 X111.430 Y115.911 E0.00709 ; perimeter
G1 X111.406 Y115.804 E0.00508 ; perimeter
G1 X111.420 Y115.632 E0.00803 ; perimeter
G1 X111.479 Y115.521 E0.00579 ; perimeter
G1 X111.544 Y115.464 E0.00401 ; perimeter
G1 X111.667 Y115.413 E0.00617 ; perimeter
G1 X111.932 Y115.415 E0.01228 ; perimeter
G1 X112.111 Y115.494 E0.00907 ; perimeter
G1 X112.120 Y115.645 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:12.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;12.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.203 Y115.639 E-0.04525 ; wipe and retract
G1 X112.217 Y115.800 E-0.04255 ; wipe and retract
G1 X112.193 Y115.917 E-0.03173 ; wipe and retract
G1 X112.132 Y116.022 E-0.03204 ; wipe and retract
G1 X112.064 Y116.081 E-0.02368 ; wipe and retract
G1 X111.983 Y116.117 E-0.02354 ; wipe and retract
G1 X111.835 Y116.139 E-0.03933 ; wipe and retract
G1 X111.700 Y116.126 E-0.03572 ; wipe and retract
G1 X111.513 Y116.040 E-0.05456 ; wipe and retract
G1 X111.430 Y115.911 E-0.04040 ; wipe and retract
G1 X111.406 Y115.804 E-0.02892 ; wipe and retract
G1 X111.420 Y115.632 E-0.04576 ; wipe and retract
G1 X111.479 Y115.521 E-0.03298 ; wipe and retract
G1 X111.544 Y115.464 E-0.02287 ; wipe and retract
G1 X111.667 Y115.413 E-0.03518 ; wipe and retract
G1 X111.932 Y115.415 E-0.06994 ; wipe and retract
G1 X112.111 Y115.494 E-0.05168 ; wipe and retract
;WIPE_END
G1 E-1.74388 F2400.000 ; retract
G1 Z12.075 F10800.000 ; lift Z
G1 Z12.200 ; move to next layer (60)
;AFTER_LAYER_CHANGE
;12.2
G1 Z12.275 ; lift Z
G1 X108.115 Y112.655 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.889 Y112.600 E0.01076 ; perimeter
G1 X107.602 Y112.432 E0.01538 ; perimeter
G1 X107.409 Y112.266 E0.01179 ; perimeter
G1 X107.218 Y111.844 E0.02149 ; perimeter
G1 X107.058 Y111.044 E0.03778 ; perimeter
G1 X106.736 Y110.180 E0.04270 ; perimeter
G1 X106.582 Y109.863 E0.01635 ; perimeter
G1 X106.519 Y109.654 E0.01009 ; perimeter
G1 X106.246 Y109.223 E0.02361 ; perimeter
G1 X106.164 Y108.848 E0.01780 ; perimeter
G1 X106.178 Y108.595 E0.01173 ; perimeter
G1 X106.095 Y108.326 E0.01306 ; perimeter
G1 X105.862 Y108.047 E0.01682 ; perimeter
G1 X105.354 Y107.622 E0.03068 ; perimeter
G1 X104.784 Y107.317 E0.02992 ; perimeter
G1 X104.586 Y107.263 E0.00954 ; perimeter
G1 X104.401 Y107.108 E0.01116 ; perimeter
G1 X103.929 Y106.809 E0.02586 ; perimeter
G1 X103.330 Y106.676 E0.02846 ; perimeter
G1 X102.867 Y106.530 E0.02246 ; perimeter
G1 X102.606 Y106.344 E0.01485 ; perimeter
G1 X102.411 Y106.088 E0.01493 ; perimeter
G1 X102.093 Y105.729 E0.02223 ; perimeter
G1 X101.697 Y105.214 E0.03006 ; perimeter
G1 X101.473 Y104.798 E0.02190 ; perimeter
G1 X101.426 Y104.378 E0.01957 ; perimeter
G1 X101.540 Y104.140 E0.01222 ; perimeter
G1 X102.041 Y104.399 E0.02609 ; perimeter
G1 X102.341 Y104.705 E0.01988 ; perimeter
G1 X102.944 Y105.525 E0.04714 ; perimeter
G1 X103.293 Y105.782 E0.02008 ; perimeter
G1 X103.837 Y105.915 E0.02594 ; perimeter
G1 X104.708 Y106.301 E0.04415 ; perimeter
G1 X105.086 Y106.434 E0.01854 ; perimeter
G1 X105.429 Y106.672 E0.01932 ; perimeter
G1 X105.947 Y107.123 E0.03184 ; perimeter
G1 X106.497 Y107.476 E0.03028 ; perimeter
G1 X106.806 Y107.738 E0.01873 ; perimeter
G1 X106.938 Y107.882 E0.00910 ; perimeter
G1 X106.982 Y107.948 E0.00364 ; perimeter
G1 X107.058 Y108.193 E0.01189 ; perimeter
G1 X107.054 Y108.542 E0.01615 ; perimeter
G1 X106.969 Y108.810 E0.01302 ; perimeter
G1 X106.977 Y108.882 E0.00337 ; perimeter
G1 X106.894 Y109.141 E0.01259 ; perimeter
G1 X106.959 Y109.409 E0.01277 ; perimeter
G1 X106.961 Y109.627 E0.01014 ; perimeter
G1 X107.059 Y109.874 E0.01229 ; perimeter
G1 X107.179 Y110.277 E0.01945 ; perimeter
G1 X107.309 Y110.486 E0.01144 ; perimeter
G1 X107.362 Y110.615 E0.00644 ; perimeter
G1 X107.484 Y111.020 E0.01961 ; perimeter
G1 X107.671 Y111.258 E0.01401 ; perimeter
G1 X107.726 Y111.382 E0.00625 ; perimeter
G1 X108.124 Y111.789 E0.02641 ; perimeter
G1 X108.243 Y111.964 E0.00977 ; perimeter
G1 X108.343 Y112.175 E0.01083 ; perimeter
G1 X108.373 Y112.355 E0.00845 ; perimeter
G1 X108.307 Y112.586 E0.01111 ; perimeter
G1 X108.248 Y112.644 E0.00384 ; perimeter
G1 X108.174 Y112.650 E0.00343 ; perimeter
G1 X108.007 Y112.449 F10800.000 ; move inwards before travel
G1 X108.110 Y112.400 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.393402
G1 F2400.000
G1 X107.753 Y112.009 E0.01542 ; infill
G1 X107.632 Y111.832 E0.00624 ; infill
;WIDTH:0.360439
G1 X107.511 Y111.656 E0.00565 ; infill
;WIDTH:0.3217
G1 X107.391 Y111.479 E0.00496 ; infill
G1 X107.390 Y111.303 F10800.000 ; move to first infill point
;WIDTH:0.166437
G1 F2400.000
G1 X107.467 Y111.544 E0.00260 ; infill
;WIDTH:0.175641
G1 X107.763 Y112.247 E0.00842 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.467 Y111.544 E-0.20123 ; wipe and retract
;WIPE_END
G1 E-2.19877 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X106.670 Y109.442 ; move to first infill point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.361614
G1 F2400.000
G1 X106.567 Y108.816 E0.01682 ; infill
G1 X106.607 Y108.508 E0.00823 ; infill
;WIDTH:0.454934
G1 X106.577 Y108.263 E0.00845 ; infill
G1 X106.547 Y108.165 E0.00349 ; infill
G1 X106.484 Y108.071 E0.00389 ; infill
G1 X106.239 Y107.824 E0.01192 ; infill
;WIDTH:0.426198
G1 X106.169 Y107.762 E0.00298 ; infill
;WIDTH:0.397904
G1 X105.935 Y107.589 E0.00859 ; infill
;WIDTH:0.358542
G1 X105.726 Y107.435 E0.00682 ; infill
;WIDTH:0.32593
G1 X105.291 Y107.111 E0.01276 ; infill
;WIDTH:0.440052
G1 X104.974 Y106.906 E0.01247 ; infill
G1 X104.558 Y106.701 E0.01532 ; infill
;WIDTH:0.416068
G1 X104.323 Y106.576 E0.00824 ; infill
;WIDTH:0.376096
G1 X104.102 Y106.458 E0.00695 ; infill
;WIDTH:0.340207
G1 X103.699 Y106.321 E0.01054 ; infill
G1 X103.146 Y106.178 E0.01410 ; infill
G1 X103.060 Y106.143 E0.00230 ; infill
G1 X102.909 Y106.032 E0.00464 ; infill
G1 X102.655 Y105.783 E0.00879 ; infill
G1 X101.929 Y104.833 E0.02955 ; infill
;WIDTH:0.32914
G1 X101.828 Y104.697 E0.00404 ; infill
;WIDTH:0.28132
G1 X101.690 Y104.565 E0.00379 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.828 Y104.697 E-0.05041 ; wipe and retract
;WIPE_END
G1 E-2.34959 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X99.991 Y101.015 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.047 Y101.155 E0.00696 ; perimeter
G1 X100.237 Y101.350 E0.01262 ; perimeter
G1 X100.310 Y101.474 E0.00668 ; perimeter
G1 X100.557 Y101.765 E0.01766 ; perimeter
G1 X100.670 Y101.950 E0.01005 ; perimeter
G1 X100.878 Y102.224 E0.01596 ; perimeter
G1 X100.882 Y102.286 E0.00286 ; perimeter
G1 X100.994 Y102.519 E0.01200 ; perimeter
G1 X101.013 Y102.726 E0.00961 ; perimeter
G1 X101.085 Y102.975 E0.01200 ; perimeter
G1 X101.051 Y103.324 E0.01626 ; perimeter
G1 X101.005 Y103.362 E0.00274 ; perimeter
G1 X100.744 Y103.285 E0.01261 ; perimeter
G1 X100.450 Y103.048 E0.01750 ; perimeter
G1 X100.330 Y102.891 E0.00915 ; perimeter
G1 X100.164 Y102.614 E0.01495 ; perimeter
G1 X100.018 Y102.232 E0.01894 ; perimeter
G1 X99.916 Y101.795 E0.02079 ; perimeter
G1 X99.891 Y101.574 E0.01032 ; perimeter
G1 X99.913 Y101.383 E0.00891 ; perimeter
G1 X99.866 Y100.998 E0.01796 ; perimeter
G1 X99.874 Y100.936 E0.00288 ; perimeter
G1 X99.920 Y100.931 E0.00213 ; perimeter
G1 X99.952 Y100.969 E0.00235 ; perimeter
G1 X99.923 Y101.149 F10800.000 ; move inwards before travel
G1 X100.186 Y101.702 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.245836
G1 F2400.000
G1 X100.360 Y102.127 E0.00776 ; infill
G1 X100.434 Y102.263 E0.00261 ; infill
;WIDTH:0.349748
G1 X100.829 Y103.016 E0.02170 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.434 Y102.263 E-0.22442 ; wipe and retract
;WIPE_END
G1 E-2.17558 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X99.423 Y99.516 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.376 Y99.463 E0.00332 ; perimeter
G1 X99.060 Y99.320 E0.01603 ; perimeter
G1 X99.038 Y99.324 E0.00108 ; perimeter
G1 X99.004 Y99.290 E0.00222 ; perimeter
G1 X98.718 Y98.905 E0.02223 ; perimeter
G1 X98.664 Y98.724 E0.00874 ; perimeter
G1 X98.646 Y98.488 E0.01092 ; perimeter
G1 X98.706 Y98.226 E0.01249 ; perimeter
G1 X98.770 Y98.068 E0.00790 ; perimeter
G1 X98.808 Y97.852 E0.01013 ; perimeter
G1 X98.895 Y97.596 E0.01253 ; perimeter
G1 X99.061 Y96.538 E0.04961 ; perimeter
G1 X98.981 Y96.362 E0.00894 ; perimeter
G1 X98.964 Y96.084 E0.01293 ; perimeter
G1 X98.985 Y95.849 E0.01094 ; perimeter
G1 X99.084 Y95.589 E0.01287 ; perimeter
G1 X99.163 Y95.513 E0.00505 ; perimeter
G1 X99.291 Y95.461 E0.00643 ; perimeter
G1 X99.417 Y95.465 E0.00584 ; perimeter
G1 X99.555 Y95.509 E0.00668 ; perimeter
G1 X99.688 Y95.633 E0.00842 ; perimeter
G1 X99.865 Y95.941 E0.01647 ; perimeter
G1 X99.871 Y95.989 E0.00225 ; perimeter
G1 X99.852 Y96.176 E0.00872 ; perimeter
G1 X99.793 Y96.408 E0.01105 ; perimeter
G1 X99.713 Y96.530 E0.00678 ; perimeter
G1 X99.667 Y96.745 E0.01016 ; perimeter
G1 X99.577 Y96.952 E0.01048 ; perimeter
G1 X99.576 Y97.228 E0.01277 ; perimeter
G1 X99.497 Y97.619 E0.01851 ; perimeter
G1 X99.507 Y98.396 E0.03600 ; perimeter
G1 X99.569 Y98.940 E0.02533 ; perimeter
G1 X99.526 Y99.208 E0.01258 ; perimeter
G1 X99.483 Y99.284 E0.00403 ; perimeter
G1 X99.444 Y99.461 E0.00840 ; perimeter
G1 X99.397 Y99.450 F10800.000 ; move inwards before travel
G1 X99.029 Y98.920 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.263869
G1 F2400.000
G1 X99.170 Y97.807 E0.02060 ; infill
;WIDTH:0.130983
G1 X99.269 Y97.196 E0.00453 ; infill
G1 X99.296 Y96.883 E0.00230 ; infill
;WIDTH:0.162367
G1 X99.330 Y96.765 E0.00122 ; infill
;WIDTH:0.20065
G1 X99.389 Y96.516 E0.00336 ; infill
;WIDTH:0.217613
G1 X99.414 Y95.717 E0.01161 ; infill
G1 X99.393 Y95.710 F10800.000 ; move to first infill point
;WIDTH:0.31276
G1 F2400.000
G1 X99.385 Y96.259 E0.01230 ; infill
;WIDTH:0.286073
G1 X99.377 Y96.807 E0.01108 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.385 Y96.259 E-0.14467 ; wipe and retract
;WIPE_END
G1 E-2.25533 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X101.513 Y95.348 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.469 Y95.177 E0.00816 ; perimeter
G1 X101.477 Y95.047 E0.00603 ; perimeter
G1 X101.540 Y94.865 E0.00893 ; perimeter
G1 X101.612 Y94.813 E0.00412 ; perimeter
G1 X101.928 Y94.749 E0.01493 ; perimeter
G1 X102.044 Y94.749 E0.00538 ; perimeter
G1 X102.283 Y94.833 E0.01174 ; perimeter
G1 X102.357 Y94.905 E0.00477 ; perimeter
G1 X102.483 Y95.189 E0.01437 ; perimeter
G1 X102.440 Y95.351 E0.00779 ; perimeter
G1 X102.371 Y95.503 E0.00769 ; perimeter
G1 X102.218 Y95.644 E0.00965 ; perimeter
G1 X101.994 Y95.689 E0.01058 ; perimeter
G1 X101.916 Y95.671 E0.00372 ; perimeter
G1 X101.717 Y95.566 E0.01044 ; perimeter
G1 X101.565 Y95.377 E0.01123 ; perimeter
G1 X101.609 Y95.201 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.469 Y95.177 E-0.05857 ; wipe and retract
G1 X101.477 Y95.047 E-0.03436 ; wipe and retract
G1 X101.540 Y94.865 E-0.05089 ; wipe and retract
G1 X101.612 Y94.813 E-0.02346 ; wipe and retract
G1 X101.928 Y94.749 E-0.08504 ; wipe and retract
G1 X102.044 Y94.749 E-0.03066 ; wipe and retract
G1 X102.283 Y94.833 E-0.06691 ; wipe and retract
G1 X102.357 Y94.905 E-0.02720 ; wipe and retract
G1 X102.483 Y95.189 E-0.08186 ; wipe and retract
G1 X102.440 Y95.351 E-0.04440 ; wipe and retract
G1 X102.371 Y95.503 E-0.04380 ; wipe and retract
G1 X102.218 Y95.644 E-0.05495 ; wipe and retract
G1 X101.994 Y95.689 E-0.06025 ; wipe and retract
G1 X101.916 Y95.671 E-0.02118 ; wipe and retract
G1 X101.717 Y95.566 E-0.05948 ; wipe and retract
G1 X101.565 Y95.377 E-0.06398 ; wipe and retract
;WIPE_END
G1 E-1.59301 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X104.513 Y95.580 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.643 Y95.611 E0.00452 ; perimeter
G1 X104.549 Y95.611 E0.00320 ; perimeter
G1 X104.191 Y95.999 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.088 Y95.891 E0.00693 ; perimeter
G1 X104.033 Y95.750 E0.00702 ; perimeter
G1 X104.047 Y95.709 E0.00200 ; perimeter
G1 X104.003 Y95.490 E0.01032 ; perimeter
G1 X104.096 Y95.338 E0.00825 ; perimeter
G1 X104.077 Y95.192 E0.00686 ; perimeter
G1 X104.188 Y95.093 E0.00689 ; perimeter
G1 X104.457 Y95.071 E0.01250 ; perimeter
G1 X104.727 Y95.122 E0.01273 ; perimeter
G1 X104.816 Y95.157 E0.00442 ; perimeter
G1 X105.123 Y95.316 E0.01602 ; perimeter
G1 X105.297 Y95.444 E0.01002 ; perimeter
G1 X105.517 Y95.719 E0.01628 ; perimeter
G1 X105.491 Y95.783 E0.00321 ; perimeter
G1 X105.408 Y95.809 E0.00403 ; perimeter
G1 X105.225 Y95.979 E0.01157 ; perimeter
G1 X105.115 Y96.008 E0.00530 ; perimeter
G1 X104.995 Y96.010 E0.00556 ; perimeter
G1 X104.785 Y96.093 E0.01045 ; perimeter
G1 X104.432 Y96.093 E0.01634 ; perimeter
G1 X104.247 Y96.021 E0.00919 ; perimeter
G1 X104.201 Y95.850 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.088 Y95.891 E-0.05424 ; wipe and retract
G1 X104.033 Y95.750 E-0.04002 ; wipe and retract
G1 X104.047 Y95.709 E-0.01137 ; wipe and retract
G1 X104.003 Y95.490 E-0.05880 ; wipe and retract
G1 X104.096 Y95.338 E-0.04699 ; wipe and retract
G1 X104.077 Y95.192 E-0.03906 ; wipe and retract
G1 X104.188 Y95.093 E-0.03924 ; wipe and retract
G1 X104.457 Y95.071 E-0.07123 ; wipe and retract
G1 X104.727 Y95.122 E-0.07253 ; wipe and retract
G1 X104.816 Y95.157 E-0.02517 ; wipe and retract
G1 X105.123 Y95.316 E-0.09127 ; wipe and retract
G1 X105.297 Y95.444 E-0.05706 ; wipe and retract
G1 X105.517 Y95.719 E-0.09276 ; wipe and retract
G1 X105.491 Y95.783 E-0.01830 ; wipe and retract
G1 X105.408 Y95.809 E-0.02295 ; wipe and retract
G1 X105.225 Y95.979 E-0.06591 ; wipe and retract
G1 X105.115 Y96.008 E-0.03019 ; wipe and retract
G1 X104.995 Y96.010 E-0.03166 ; wipe and retract
G1 X104.785 Y96.093 E-0.05956 ; wipe and retract
G1 X104.432 Y96.093 E-0.09308 ; wipe and retract
G1 X104.247 Y96.021 E-0.05238 ; wipe and retract
;WIPE_END
G1 E-1.32625 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X107.288 Y97.608 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.388 Y97.560 E0.00375 ; perimeter
G1 X107.468 Y97.636 E0.00374 ; perimeter
G1 X107.655 Y97.907 E0.01116 ; perimeter
G1 X107.464 Y97.798 E0.00746 ; perimeter
G1 X107.315 Y97.653 E0.00702 ; perimeter
G1 X106.790 Y97.729 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.789 Y97.547 E0.00842 ; perimeter
G1 X106.943 Y97.232 E0.01622 ; perimeter
G1 X107.105 Y97.162 E0.00819 ; perimeter
G1 X107.236 Y97.057 E0.00779 ; perimeter
G1 X107.418 Y97.049 E0.00841 ; perimeter
G1 X107.657 Y97.151 E0.01202 ; perimeter
G1 X107.836 Y97.321 E0.01147 ; perimeter
G1 X108.055 Y97.639 E0.01787 ; perimeter
G1 X108.265 Y97.870 E0.01446 ; perimeter
G1 X108.887 Y98.435 E0.03890 ; perimeter
G1 X108.945 Y98.518 E0.00469 ; perimeter
G1 X109.104 Y98.817 E0.01571 ; perimeter
G1 X109.093 Y98.906 E0.00414 ; perimeter
G1 X109.120 Y99.029 E0.00584 ; perimeter
G1 X109.110 Y99.233 E0.00947 ; perimeter
G1 X109.066 Y99.404 E0.00818 ; perimeter
G1 X109.015 Y99.477 E0.00411 ; perimeter
G1 X108.720 Y99.442 E0.01376 ; perimeter
G1 X108.472 Y99.274 E0.01386 ; perimeter
G1 X108.167 Y98.919 E0.02172 ; perimeter
G1 X107.964 Y98.745 E0.01236 ; perimeter
G1 X107.817 Y98.564 E0.01079 ; perimeter
G1 X107.552 Y98.429 E0.01378 ; perimeter
G1 X107.327 Y98.264 E0.01293 ; perimeter
G1 X107.189 Y98.202 E0.00700 ; perimeter
G1 X106.862 Y97.885 E0.02112 ; perimeter
G1 X106.815 Y97.783 E0.00519 ; perimeter
G1 X106.922 Y97.603 F10800.000 ; move inwards before travel
G1 X107.980 Y97.928 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.379659
G1 F2400.000
G1 X107.979 Y98.177 E0.00697 ; infill
G1 X108.101 Y98.266 E0.00424 ; infill
;WIDTH:0.398374
G1 X108.479 Y98.639 E0.01569 ; infill
;WIDTH:0.417211
G1 X108.678 Y98.896 E0.01011 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.479 Y98.639 E-0.08568 ; wipe and retract
;WIPE_END
G1 E-2.31432 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X109.711 Y100.695 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.749 Y100.673 E0.00200 ; perimeter
G1 X109.797 Y100.703 E0.00263 ; perimeter
G1 X110.077 Y100.633 E0.01335 ; perimeter
G1 X110.354 Y100.787 E0.01470 ; perimeter
G1 X110.475 Y100.882 E0.00712 ; perimeter
G1 X110.545 Y100.976 E0.00541 ; perimeter
G1 X110.577 Y101.071 E0.00463 ; perimeter
G1 X110.585 Y101.333 E0.01217 ; perimeter
G1 X110.493 Y101.530 E0.01006 ; perimeter
G1 X110.434 Y101.587 E0.00379 ; perimeter
G1 X110.255 Y101.634 E0.00857 ; perimeter
G1 X109.910 Y101.551 E0.01643 ; perimeter
G1 X109.762 Y101.392 E0.01009 ; perimeter
G1 X109.639 Y101.049 E0.01684 ; perimeter
G1 X109.631 Y100.794 E0.01183 ; perimeter
G1 X109.670 Y100.735 E0.00324 ; perimeter
G1 X109.753 Y100.705 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.749 Y100.673 E-0.02656 ; wipe and retract
G1 X109.797 Y100.703 E-0.01500 ; wipe and retract
G1 X110.077 Y100.633 E-0.07605 ; wipe and retract
G1 X110.354 Y100.787 E-0.08373 ; wipe and retract
G1 X110.475 Y100.882 E-0.04058 ; wipe and retract
G1 X110.545 Y100.976 E-0.03084 ; wipe and retract
G1 X110.577 Y101.071 E-0.02639 ; wipe and retract
G1 X110.585 Y101.333 E-0.06933 ; wipe and retract
G1 X110.493 Y101.530 E-0.05732 ; wipe and retract
G1 X110.434 Y101.587 E-0.02162 ; wipe and retract
G1 X110.255 Y101.634 E-0.04882 ; wipe and retract
G1 X109.910 Y101.551 E-0.09360 ; wipe and retract
G1 X109.762 Y101.392 E-0.05747 ; wipe and retract
G1 X109.639 Y101.049 E-0.09596 ; wipe and retract
G1 X109.631 Y100.794 E-0.06739 ; wipe and retract
G1 X109.670 Y100.735 E-0.01844 ; wipe and retract
;WIPE_END
G1 E-1.57089 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X111.753 Y102.660 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.804 Y102.569 E0.00483 ; perimeter
G1 X111.999 Y102.424 E0.01124 ; perimeter
G1 X112.138 Y102.457 E0.00663 ; perimeter
G1 X112.271 Y102.452 E0.00619 ; perimeter
G1 X112.820 Y102.689 E0.02772 ; perimeter
G1 X113.391 Y102.740 E0.02654 ; perimeter
G1 X114.271 Y102.656 E0.04095 ; perimeter
G1 X114.515 Y102.733 E0.01185 ; perimeter
G1 X114.648 Y102.865 E0.00869 ; perimeter
G1 X114.685 Y102.943 E0.00402 ; perimeter
G1 X114.693 Y103.066 E0.00567 ; perimeter
G1 X114.674 Y103.160 E0.00445 ; perimeter
G1 X114.617 Y103.276 E0.00598 ; perimeter
G1 X114.519 Y103.354 E0.00582 ; perimeter
G1 X114.365 Y103.418 E0.00774 ; perimeter
G1 X112.865 Y103.528 E0.06966 ; perimeter
G1 X112.440 Y103.448 E0.02005 ; perimeter
G1 X112.191 Y103.381 E0.01192 ; perimeter
G1 X111.863 Y103.157 E0.01842 ; perimeter
G1 X111.785 Y103.017 E0.00741 ; perimeter
G1 X111.716 Y102.811 E0.01005 ; perimeter
G1 X111.739 Y102.718 E0.00444 ; perimeter
G1 X111.855 Y102.638 F10800.000 ; move inwards before travel
G1 X111.985 Y102.740 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.19484
G1 F2400.000
G1 X112.028 Y102.768 E0.00065 ; infill
;WIDTH:0.243058
G1 X112.071 Y102.796 E0.00086 ; infill
;WIDTH:0.251538
G1 X112.076 Y102.798 E0.00009 ; infill
;WIDTH:0.266511
G1 X112.088 Y102.808 E0.00029 ; infill
;WIDTH:0.311209
G1 X112.120 Y102.834 E0.00091 ; infill
;WIDTH:0.338046
G1 X112.138 Y102.846 E0.00055 ; infill
;WIDTH:0.364882
G1 X112.156 Y102.859 E0.00060 ; infill
;WIDTH:0.378572
G1 X112.378 Y102.976 E0.00699 ; infill
G1 X112.745 Y103.091 E0.01075 ; infill
;WIDTH:0.389306
G1 X113.134 Y103.113 E0.01122 ; infill
;WIDTH:0.259486
G1 X113.405 Y103.114 E0.00487 ; infill
G1 X114.230 Y103.044 E0.01492 ; infill
G1 X114.340 Y103.051 E0.00198 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.230 Y103.044 E-0.02903 ; wipe and retract
G1 X113.405 Y103.114 E-0.21858 ; wipe and retract
G1 X113.134 Y103.113 E-0.07129 ; wipe and retract
;WIPE_END
G1 E-2.08109 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X115.235 Y105.297 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.309 Y105.238 E0.00438 ; perimeter
G1 X115.398 Y105.201 E0.00449 ; perimeter
G1 X115.526 Y105.193 E0.00592 ; perimeter
G1 X115.720 Y105.247 E0.00936 ; perimeter
G1 X115.863 Y105.412 E0.01011 ; perimeter
G1 X115.892 Y105.521 E0.00520 ; perimeter
G1 X115.882 Y105.738 E0.01008 ; perimeter
G1 X115.788 Y105.910 E0.00907 ; perimeter
G1 X115.700 Y105.972 E0.00502 ; perimeter
G1 X115.537 Y106.012 E0.00773 ; perimeter
G1 X115.383 Y105.987 E0.00722 ; perimeter
G1 X115.256 Y105.914 E0.00683 ; perimeter
G1 X115.147 Y105.751 E0.00907 ; perimeter
G1 X115.137 Y105.528 E0.01032 ; perimeter
G1 X115.202 Y105.348 E0.00890 ; perimeter
G1 X115.329 Y105.310 F10800.000 ; move inwards before travel
G1 X115.514 Y105.631 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.309932
G1 F2400.000
G1 X115.508 Y105.561 E0.00157 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.514 Y105.631 E-0.01863 ; wipe and retract
;WIPE_END
G1 E-2.38137 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X115.404 Y111.213 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.594 Y111.205 E0.00883 ; perimeter
G1 X115.705 Y111.246 E0.00547 ; perimeter
G1 X115.797 Y111.331 E0.00580 ; perimeter
G1 X115.846 Y111.456 E0.00624 ; perimeter
G1 X115.881 Y111.621 E0.00779 ; perimeter
G1 X115.857 Y111.820 E0.00931 ; perimeter
G1 X115.778 Y111.976 E0.00808 ; perimeter
G1 X115.685 Y112.050 E0.00551 ; perimeter
G1 X115.453 Y112.083 E0.01085 ; perimeter
G1 X115.260 Y111.982 E0.01012 ; perimeter
G1 X115.158 Y111.674 E0.01503 ; perimeter
G1 X115.166 Y111.517 E0.00725 ; perimeter
G1 X115.252 Y111.321 E0.00992 ; perimeter
G1 X115.348 Y111.236 E0.00597 ; perimeter
G1 X115.547 Y111.338 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.594 Y111.205 E-0.06534 ; wipe and retract
G1 X115.705 Y111.246 E-0.03117 ; wipe and retract
G1 X115.797 Y111.331 E-0.03305 ; wipe and retract
G1 X115.846 Y111.456 E-0.03556 ; wipe and retract
G1 X115.881 Y111.621 E-0.04439 ; wipe and retract
G1 X115.857 Y111.820 E-0.05305 ; wipe and retract
G1 X115.778 Y111.976 E-0.04602 ; wipe and retract
G1 X115.685 Y112.050 E-0.03142 ; wipe and retract
G1 X115.453 Y112.083 E-0.06181 ; wipe and retract
G1 X115.260 Y111.982 E-0.05766 ; wipe and retract
G1 X115.158 Y111.674 E-0.08560 ; wipe and retract
G1 X115.166 Y111.517 E-0.04131 ; wipe and retract
G1 X115.252 Y111.321 E-0.05652 ; wipe and retract
G1 X115.348 Y111.236 E-0.03402 ; wipe and retract
;WIPE_END
G1 E-1.72308 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X115.433 Y114.687 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.518 Y114.724 E0.00430 ; perimeter
G1 X115.587 Y114.786 E0.00429 ; perimeter
G1 X115.662 Y114.917 E0.00703 ; perimeter
G1 X115.691 Y115.039 E0.00581 ; perimeter
G1 X115.646 Y115.257 E0.01028 ; perimeter
G1 X115.579 Y115.356 E0.00557 ; perimeter
G1 X115.100 Y115.779 E0.02960 ; perimeter
G1 X114.867 Y115.943 E0.01318 ; perimeter
G1 X114.692 Y116.007 E0.00860 ; perimeter
G1 X114.499 Y115.975 E0.00906 ; perimeter
G1 X114.350 Y115.865 E0.00861 ; perimeter
G1 X114.244 Y115.659 E0.01071 ; perimeter
G1 X114.230 Y115.512 E0.00685 ; perimeter
G1 X114.255 Y115.409 E0.00493 ; perimeter
G1 X114.475 Y115.189 E0.01442 ; perimeter
G1 X114.983 Y114.776 E0.03034 ; perimeter
G1 X115.150 Y114.694 E0.00858 ; perimeter
G1 X115.373 Y114.682 E0.01037 ; perimeter
G1 X115.462 Y114.775 F10800.000 ; move inwards before travel
G1 X114.667 Y115.579 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.328038
G1 F2400.000
G1 X115.296 Y115.067 E0.01922 ; infill
G1 X115.369 Y114.924 E0.00382 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.296 Y115.067 E-0.04252 ; wipe and retract
G1 X114.667 Y115.579 E-0.21388 ; wipe and retract
;WIPE_END
G1 E-2.14359 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 X112.055 Y115.473 ; move to first perimeter point
G1 Z12.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.130 Y115.550 E0.00494 ; perimeter
G1 X112.174 Y115.651 E0.00510 ; perimeter
G1 X112.185 Y115.792 E0.00656 ; perimeter
G1 X112.163 Y115.909 E0.00551 ; perimeter
G1 X112.099 Y116.021 E0.00600 ; perimeter
G1 X111.967 Y116.110 E0.00734 ; perimeter
G1 X111.819 Y116.136 E0.00700 ; perimeter
G1 X111.684 Y116.131 E0.00626 ; perimeter
G1 X111.486 Y116.045 E0.00997 ; perimeter
G1 X111.404 Y115.923 E0.00680 ; perimeter
G1 X111.375 Y115.756 E0.00786 ; perimeter
G1 X111.385 Y115.639 E0.00541 ; perimeter
G1 X111.457 Y115.510 E0.00688 ; perimeter
G1 X111.527 Y115.455 E0.00411 ; perimeter
G1 X111.654 Y115.408 E0.00628 ; perimeter
G1 X111.888 Y115.413 E0.01085 ; perimeter
G1 X111.999 Y115.453 E0.00545 ; perimeter
G1 X112.049 Y115.580 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:12.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;12.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.130 Y115.550 E-0.04297 ; wipe and retract
G1 X112.174 Y115.651 E-0.02905 ; wipe and retract
G1 X112.185 Y115.792 E-0.03736 ; wipe and retract
G1 X112.163 Y115.909 E-0.03141 ; wipe and retract
G1 X112.099 Y116.021 E-0.03416 ; wipe and retract
G1 X111.967 Y116.110 E-0.04180 ; wipe and retract
G1 X111.819 Y116.136 E-0.03989 ; wipe and retract
G1 X111.684 Y116.131 E-0.03566 ; wipe and retract
G1 X111.486 Y116.045 E-0.05682 ; wipe and retract
G1 X111.404 Y115.923 E-0.03877 ; wipe and retract
G1 X111.375 Y115.756 E-0.04476 ; wipe and retract
G1 X111.385 Y115.639 E-0.03084 ; wipe and retract
G1 X111.457 Y115.510 E-0.03918 ; wipe and retract
G1 X111.527 Y115.455 E-0.02343 ; wipe and retract
G1 X111.654 Y115.408 E-0.03578 ; wipe and retract
G1 X111.888 Y115.413 E-0.06182 ; wipe and retract
G1 X111.999 Y115.453 E-0.03104 ; wipe and retract
;WIPE_END
G1 E-1.74526 F2400.000 ; retract
G1 Z12.275 F10800.000 ; lift Z
G1 Z12.400 ; move to next layer (61)
;AFTER_LAYER_CHANGE
;12.4
G1 Z12.475 ; lift Z
G1 X106.622 Y109.269 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.321 Y108.794 E0.02600 ; perimeter
G1 X106.240 Y108.616 E0.00911 ; perimeter
G1 X106.226 Y108.466 E0.00698 ; perimeter
G1 X105.809 Y107.899 E0.03256 ; perimeter
G1 X105.430 Y107.533 E0.02442 ; perimeter
G1 X104.783 Y107.197 E0.03378 ; perimeter
G1 X104.712 Y107.179 E0.00340 ; perimeter
G1 X104.277 Y106.927 E0.02329 ; perimeter
G1 X103.845 Y106.748 E0.02169 ; perimeter
G1 X103.519 Y106.681 E0.01541 ; perimeter
G1 X103.066 Y106.536 E0.02200 ; perimeter
G1 X102.788 Y106.359 E0.01528 ; perimeter
G1 X102.552 Y106.143 E0.01484 ; perimeter
G1 X102.289 Y105.860 E0.01788 ; perimeter
G1 X101.605 Y105.057 E0.04888 ; perimeter
G1 X101.328 Y104.552 E0.02667 ; perimeter
G1 X101.312 Y104.408 E0.00669 ; perimeter
G1 X101.064 Y103.816 E0.02973 ; perimeter
G1 X100.561 Y103.273 E0.03431 ; perimeter
G1 X100.279 Y102.835 E0.02414 ; perimeter
G1 X100.123 Y102.331 E0.02442 ; perimeter
G1 X100.106 Y101.963 E0.01708 ; perimeter
G1 X100.159 Y101.717 E0.01166 ; perimeter
G1 X100.231 Y101.759 E0.00385 ; perimeter
G1 X100.461 Y102.009 E0.01574 ; perimeter
G1 X100.691 Y102.104 E0.01152 ; perimeter
G1 X100.926 Y102.398 E0.01746 ; perimeter
G1 X101.087 Y102.704 E0.01600 ; perimeter
G1 X101.241 Y103.243 E0.02596 ; perimeter
G1 X101.246 Y103.421 E0.00827 ; perimeter
G1 X101.399 Y103.579 E0.01019 ; perimeter
G1 X101.577 Y103.893 E0.01674 ; perimeter
G1 X101.702 Y104.031 E0.00863 ; perimeter
G1 X101.944 Y104.220 E0.01420 ; perimeter
G1 X102.108 Y104.387 E0.01086 ; perimeter
G1 X102.402 Y104.789 E0.02303 ; perimeter
G1 X102.596 Y105.138 E0.01854 ; perimeter
G1 X102.891 Y105.548 E0.02337 ; perimeter
G1 X103.217 Y105.762 E0.01808 ; perimeter
G1 X104.163 Y105.978 E0.04495 ; perimeter
G1 X104.954 Y106.305 E0.03967 ; perimeter
G1 X105.324 Y106.594 E0.02170 ; perimeter
G1 X105.459 Y106.792 E0.01112 ; perimeter
G1 X105.904 Y107.192 E0.02771 ; perimeter
G1 X106.333 Y107.406 E0.02223 ; perimeter
G1 X106.781 Y107.679 E0.02428 ; perimeter
G1 X107.042 Y107.953 E0.01755 ; perimeter
G1 X107.094 Y108.109 E0.00757 ; perimeter
G1 X107.098 Y108.399 E0.01345 ; perimeter
G1 X107.032 Y108.624 E0.01084 ; perimeter
G1 X106.959 Y108.685 E0.00444 ; perimeter
G1 X106.906 Y108.844 E0.00774 ; perimeter
G1 X106.811 Y108.921 E0.00567 ; perimeter
G1 X106.781 Y109.024 E0.00495 ; perimeter
G1 X106.617 Y109.101 E0.00841 ; perimeter
G1 X106.620 Y109.209 E0.00501 ; perimeter
G1 X106.549 Y108.875 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.321 Y108.794 E-0.13475 ; wipe and retract
G1 X106.240 Y108.616 E-0.05190 ; wipe and retract
G1 X106.226 Y108.466 E-0.03975 ; wipe and retract
G1 X105.809 Y107.899 E-0.18548 ; wipe and retract
G1 X105.430 Y107.533 E-0.13911 ; wipe and retract
G1 X104.783 Y107.197 E-0.19243 ; wipe and retract
G1 X104.712 Y107.179 E-0.01937 ; wipe and retract
G1 X104.277 Y106.927 E-0.13266 ; wipe and retract
G1 X103.845 Y106.748 E-0.12355 ; wipe and retract
G1 X103.519 Y106.681 E-0.08780 ; wipe and retract
G1 X103.066 Y106.536 E-0.12532 ; wipe and retract
G1 X102.788 Y106.359 E-0.08707 ; wipe and retract
G1 X102.552 Y106.143 E-0.08455 ; wipe and retract
G1 X102.289 Y105.860 E-0.10187 ; wipe and retract
G1 X101.605 Y105.057 E-0.27844 ; wipe and retract
G1 X101.328 Y104.552 E-0.15193 ; wipe and retract
G1 X101.312 Y104.408 E-0.03810 ; wipe and retract
G1 X101.064 Y103.816 E-0.16937 ; wipe and retract
G1 X100.713 Y103.437 E-0.13653 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X107.358 Y111.344 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.509 Y111.386 E0.00723 ; perimeter
G1 X107.652 Y111.553 E0.01017 ; perimeter
G1 X107.892 Y111.641 E0.01185 ; perimeter
G1 X108.228 Y111.912 E0.02001 ; perimeter
G1 X108.351 Y112.068 E0.00921 ; perimeter
G1 X108.468 Y112.287 E0.01150 ; perimeter
G1 X108.514 Y112.488 E0.00957 ; perimeter
G1 X108.492 Y112.661 E0.00804 ; perimeter
G1 X108.467 Y112.724 E0.00315 ; perimeter
G1 X108.398 Y112.781 E0.00417 ; perimeter
G1 X108.133 Y112.798 E0.01229 ; perimeter
G1 X107.949 Y112.720 E0.00922 ; perimeter
G1 X107.707 Y112.543 E0.01390 ; perimeter
G1 X107.560 Y112.385 E0.00999 ; perimeter
G1 X107.393 Y112.006 E0.01920 ; perimeter
G1 X107.415 Y111.576 E0.01996 ; perimeter
G1 X107.366 Y111.403 E0.00831 ; perimeter
G1 X107.479 Y111.443 F10800.000 ; move inwards before travel
G1 X107.638 Y111.928 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.366804
G1 F2400.000
G1 X108.025 Y112.281 E0.01412 ; infill
;WIDTH:0.269104
G1 X108.218 Y112.551 E0.00623 ; infill
G1 X108.265 Y112.536 F10800.000 ; move to first infill point
;WIDTH:0.165686
G1 F2400.000
G1 X107.691 Y112.106 E0.00732 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.265 Y112.536 E-0.18928 ; wipe and retract
;WIPE_END
G1 E-2.21072 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X105.187 Y107.013 ; move to first infill point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.250305
G1 F2400.000
G1 X105.336 Y107.118 E0.00314 ; infill
;WIDTH:0.131955
G1 X105.603 Y107.304 E0.00241 ; infill
;WIDTH:0.139149
G1 X105.746 Y107.436 E0.00155 ; infill
;WIDTH:0.178911
G1 X105.853 Y107.511 E0.00148 ; infill
;WIDTH:0.218673
G1 X105.959 Y107.587 E0.00191 ; infill
;WIDTH:0.258435
G1 X106.066 Y107.663 E0.00235 ; infill
;WIDTH:0.265709
G1 X106.081 Y107.674 E0.00035 ; infill
G1 X106.585 Y108.760 F10800.000 ; move to first infill point
;WIDTH:0.330752
G1 F2400.000
G1 X106.616 Y108.499 E0.00630 ; infill
;WIDTH:0.362065
G1 X106.627 Y108.455 E0.00121 ; infill
;WIDTH:0.393377
G1 X106.639 Y108.411 E0.00133 ; infill
;WIDTH:0.433861
G1 X106.655 Y108.359 E0.00176 ; infill
;WIDTH:0.442122
G1 X106.656 Y108.339 E0.00065 ; infill
;WIDTH:0.479832
G1 X106.542 Y107.816 E0.01948 ; infill
G1 X106.839 Y108.107 F10800.000 ; move to first infill point
;WIDTH:0.515557
G1 F2400.000
G1 X106.617 Y108.192 E0.00934 ; infill
G1 X106.538 Y108.093 E0.00497 ; infill
;WIDTH:0.505541
G1 X106.506 Y108.059 E0.00181 ; infill
;WIDTH:0.494688
G1 X106.329 Y107.896 E0.00905 ; infill
;WIDTH:0.448301
G1 X106.151 Y107.733 E0.00812 ; infill
;WIDTH:0.401914
G1 X105.974 Y107.570 E0.00719 ; infill
;WIDTH:0.355526
G1 X105.796 Y107.407 E0.00626 ; infill
G1 X105.587 Y107.231 F10800.000 ; move to first infill point
;WIDTH:0.380773
G1 F2400.000
G1 X104.729 Y106.684 E0.02858 ; infill
G1 X104.453 Y106.546 E0.00870 ; infill
G1 X103.981 Y106.359 E0.01425 ; infill
G1 X103.236 Y106.174 E0.02157 ; infill
;WIDTH:0.355118
G1 X103.164 Y106.144 E0.00202 ; infill
;WIDTH:0.328644
G1 X103.092 Y106.114 E0.00185 ; infill
;WIDTH:0.30217
G1 X102.795 Y105.898 E0.00792 ; infill
;WIDTH:0.25135
G1 X102.675 Y105.796 E0.00273 ; infill
;WIDTH:0.213301
G1 X102.183 Y105.161 E0.01138 ; infill
;WIDTH:0.343967
G1 X101.813 Y104.637 E0.01605 ; infill
;WIDTH:0.329996
G1 X101.661 Y104.430 E0.00613 ; infill
;WIDTH:0.304964
G1 X101.508 Y104.224 E0.00560 ; infill
G1 X100.978 Y103.368 F10800.000 ; move to first infill point
;WIDTH:0.28703
G1 F2400.000
G1 X100.510 Y102.429 E0.02128 ; infill
;WIDTH:0.275224
G1 X100.415 Y102.251 E0.00391 ; infill
G1 X100.360 Y102.240 F10800.000 ; move to first infill point
;WIDTH:0.166175
G1 F2400.000
G1 X100.873 Y102.834 E0.00804 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.360 Y102.240 E-0.20714 ; wipe and retract
;WIPE_END
G1 E-2.19286 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X99.300 Y99.179 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.041 Y99.242 E0.01233 ; perimeter
G1 X98.964 Y99.163 E0.00510 ; perimeter
G1 X98.846 Y99.121 E0.00581 ; perimeter
G1 X98.683 Y98.936 E0.01143 ; perimeter
G1 X98.622 Y98.720 E0.01040 ; perimeter
G1 X98.614 Y98.514 E0.00956 ; perimeter
G1 X98.709 Y98.235 E0.01364 ; perimeter
G1 X98.812 Y98.076 E0.00877 ; perimeter
G1 X98.944 Y97.803 E0.01407 ; perimeter
G1 X99.137 Y97.200 E0.02933 ; perimeter
G1 X99.161 Y96.584 E0.02855 ; perimeter
G1 X99.001 Y96.233 E0.01787 ; perimeter
G1 X98.996 Y96.087 E0.00678 ; perimeter
G1 X98.948 Y95.986 E0.00515 ; perimeter
G1 X98.956 Y95.758 E0.01056 ; perimeter
G1 X99.059 Y95.498 E0.01295 ; perimeter
G1 X99.129 Y95.419 E0.00489 ; perimeter
G1 X99.275 Y95.356 E0.00735 ; perimeter
G1 X99.443 Y95.355 E0.00781 ; perimeter
G1 X99.544 Y95.402 E0.00515 ; perimeter
G1 X99.668 Y95.508 E0.00757 ; perimeter
G1 X99.776 Y95.719 E0.01096 ; perimeter
G1 X99.804 Y95.962 E0.01136 ; perimeter
G1 X99.681 Y96.307 E0.01698 ; perimeter
G1 X99.590 Y96.366 E0.00501 ; perimeter
G1 X99.401 Y96.865 E0.02472 ; perimeter
G1 X99.391 Y97.653 E0.03650 ; perimeter
G1 X99.433 Y97.745 E0.00468 ; perimeter
G1 X99.432 Y98.323 E0.02679 ; perimeter
G1 X99.464 Y98.424 E0.00492 ; perimeter
G1 X99.494 Y98.768 E0.01599 ; perimeter
G1 X99.434 Y99.012 E0.01166 ; perimeter
G1 X99.337 Y99.132 E0.00713 ; perimeter
G1 X99.068 Y99.049 F10800.000 ; move inwards before travel
G1 X99.126 Y98.973 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.40481
G1 F2400.000
G1 X99.051 Y98.652 E0.00991 ; infill
G1 X99.022 Y98.195 E0.01378 ; infill
G1 X98.937 Y98.860 F10800.000 ; move to first infill point
;WIDTH:0.225841
G1 F2400.000
G1 X99.180 Y97.939 E0.01449 ; infill
G1 X99.155 Y97.933 F10800.000 ; move to first infill point
;WIDTH:0.32551
G1 F2400.000
G1 X99.056 Y98.403 E0.01130 ; infill
G1 X99.050 Y98.937 E0.01255 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.056 Y98.403 E-0.14089 ; wipe and retract
G1 X99.155 Y97.933 E-0.12694 ; wipe and retract
;WIPE_END
G1 E-2.13217 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X99.322 Y96.357 ; move to first infill point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.328845
G1 F2400.000
G1 X99.378 Y96.024 E0.00803 ; infill
;WIDTH:0.367668
G1 X99.382 Y95.959 E0.00175 ; infill
;WIDTH:0.399859
G1 X99.369 Y95.855 E0.00313 ; infill
G1 X99.402 Y95.601 E0.00759 ; infill
G1 X101.349 Y95.183 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.358 Y95.094 E0.00415 ; perimeter
G1 X101.460 Y94.776 E0.01545 ; perimeter
G1 X101.506 Y94.739 E0.00276 ; perimeter
G1 X101.975 Y94.656 E0.02209 ; perimeter
G1 X102.204 Y94.671 E0.01063 ; perimeter
G1 X102.351 Y94.731 E0.00733 ; perimeter
G1 X102.528 Y94.902 E0.01140 ; perimeter
G1 X102.553 Y95.127 E0.01051 ; perimeter
G1 X102.518 Y95.254 E0.00606 ; perimeter
G1 X102.359 Y95.414 E0.01044 ; perimeter
G1 X102.196 Y95.535 E0.00944 ; perimeter
G1 X101.999 Y95.577 E0.00932 ; perimeter
G1 X101.702 Y95.494 E0.01430 ; perimeter
G1 X101.664 Y95.445 E0.00286 ; perimeter
G1 X101.470 Y95.336 E0.01033 ; perimeter
G1 X101.447 Y95.281 E0.00274 ; perimeter
G1 X101.392 Y95.226 E0.00361 ; perimeter
G1 X101.419 Y95.127 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.358 Y95.094 E-0.03582 ; wipe and retract
G1 X101.460 Y94.776 E-0.08802 ; wipe and retract
G1 X101.506 Y94.739 E-0.01573 ; wipe and retract
G1 X101.975 Y94.656 E-0.12582 ; wipe and retract
G1 X102.204 Y94.671 E-0.06058 ; wipe and retract
G1 X102.351 Y94.731 E-0.04179 ; wipe and retract
G1 X102.528 Y94.902 E-0.06496 ; wipe and retract
G1 X102.553 Y95.127 E-0.05989 ; wipe and retract
G1 X102.518 Y95.254 E-0.03452 ; wipe and retract
G1 X102.359 Y95.414 E-0.05946 ; wipe and retract
G1 X102.196 Y95.535 E-0.05377 ; wipe and retract
G1 X101.999 Y95.577 E-0.05310 ; wipe and retract
G1 X101.702 Y95.494 E-0.08149 ; wipe and retract
G1 X101.664 Y95.445 E-0.01628 ; wipe and retract
G1 X101.470 Y95.336 E-0.05883 ; wipe and retract
G1 X101.447 Y95.281 E-0.01561 ; wipe and retract
G1 X101.392 Y95.226 E-0.02059 ; wipe and retract
;WIPE_END
G1 E-1.51373 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X104.633 Y95.551 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.687 Y95.575 E0.00200 ; perimeter
G1 X104.574 Y96.053 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.352 Y95.957 E0.01118 ; perimeter
G1 X104.263 Y95.861 E0.00604 ; perimeter
G1 X104.126 Y95.762 E0.00786 ; perimeter
G1 X104.057 Y95.616 E0.00747 ; perimeter
G1 X103.957 Y95.539 E0.00586 ; perimeter
G1 X103.914 Y95.397 E0.00686 ; perimeter
G1 X103.869 Y95.105 E0.01370 ; perimeter
G1 X104.024 Y94.973 E0.00944 ; perimeter
G1 X104.295 Y94.951 E0.01259 ; perimeter
G1 X104.563 Y95.000 E0.01262 ; perimeter
G1 X105.276 Y95.296 E0.03578 ; perimeter
G1 X105.744 Y95.637 E0.02683 ; perimeter
G1 X105.951 Y95.920 E0.01624 ; perimeter
G1 X105.875 Y95.980 E0.00448 ; perimeter
G1 X105.657 Y96.004 E0.01017 ; perimeter
G1 X105.337 Y96.079 E0.01521 ; perimeter
G1 X104.634 Y96.055 E0.03260 ; perimeter
G1 X104.510 Y95.820 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.352 Y95.957 E-0.07866 ; wipe and retract
G1 X104.263 Y95.861 E-0.03438 ; wipe and retract
G1 X104.126 Y95.762 E-0.04480 ; wipe and retract
G1 X104.057 Y95.616 E-0.04254 ; wipe and retract
G1 X103.957 Y95.539 E-0.03339 ; wipe and retract
G1 X103.914 Y95.397 E-0.03910 ; wipe and retract
G1 X103.869 Y95.105 E-0.07803 ; wipe and retract
G1 X104.024 Y94.973 E-0.05375 ; wipe and retract
G1 X104.295 Y94.951 E-0.07171 ; wipe and retract
G1 X104.563 Y95.000 E-0.07191 ; wipe and retract
G1 X105.276 Y95.296 E-0.20381 ; wipe and retract
G1 X105.744 Y95.637 E-0.15282 ; wipe and retract
G1 X105.951 Y95.920 E-0.09253 ; wipe and retract
G1 X105.875 Y95.980 E-0.02554 ; wipe and retract
G1 X105.657 Y96.004 E-0.05796 ; wipe and retract
G1 X105.337 Y96.079 E-0.08663 ; wipe and retract
G1 X104.634 Y96.055 E-0.18571 ; wipe and retract
;WIPE_END
G1 E-1.04673 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X107.381 Y97.445 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.485 Y97.489 E0.00383 ; perimeter
G1 X107.669 Y97.658 E0.00846 ; perimeter
G1 X107.845 Y97.972 E0.01217 ; perimeter
G1 X108.368 Y98.408 E0.02307 ; perimeter
G1 X108.531 Y98.584 E0.00810 ; perimeter
G1 X108.078 Y98.171 E0.02076 ; perimeter
G1 X107.746 Y97.926 E0.01395 ; perimeter
G1 X107.475 Y97.674 E0.01252 ; perimeter
G1 X107.406 Y97.594 E0.00357 ; perimeter
G1 X107.385 Y97.505 E0.00309 ; perimeter
G1 X109.011 Y98.415 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.014 Y98.632 E0.01003 ; perimeter
G1 X109.065 Y98.727 E0.00502 ; perimeter
G1 X109.013 Y99.049 E0.01513 ; perimeter
G1 X108.868 Y99.241 E0.01112 ; perimeter
G1 X108.808 Y99.268 E0.00306 ; perimeter
G1 X108.543 Y99.209 E0.01256 ; perimeter
G1 X108.268 Y99.016 E0.01554 ; perimeter
G1 X108.138 Y98.866 E0.00917 ; perimeter
G1 X107.774 Y98.546 E0.02246 ; perimeter
G1 X107.437 Y98.297 E0.01941 ; perimeter
G1 X107.128 Y98.008 E0.01962 ; perimeter
G1 X106.987 Y97.846 E0.00996 ; perimeter
G1 X106.914 Y97.657 E0.00938 ; perimeter
G1 X106.892 Y97.379 E0.01293 ; perimeter
G1 X106.977 Y97.099 E0.01354 ; perimeter
G1 X107.035 Y96.999 E0.00535 ; perimeter
G1 X107.204 Y96.886 E0.00942 ; perimeter
G1 X107.316 Y96.873 E0.00523 ; perimeter
G1 X107.750 Y97.078 E0.02220 ; perimeter
G1 X108.052 Y97.355 E0.01899 ; perimeter
G1 X108.222 Y97.659 E0.01611 ; perimeter
G1 X108.696 Y98.054 E0.02860 ; perimeter
G1 X108.978 Y98.365 E0.01944 ; perimeter
G1 X108.860 Y98.571 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.014 Y98.632 E-0.07105 ; wipe and retract
G1 X109.065 Y98.727 E-0.02861 ; wipe and retract
G1 X109.013 Y99.049 E-0.08618 ; wipe and retract
G1 X108.868 Y99.241 E-0.06333 ; wipe and retract
G1 X108.808 Y99.268 E-0.01745 ; wipe and retract
G1 X108.543 Y99.209 E-0.07157 ; wipe and retract
G1 X108.268 Y99.016 E-0.08856 ; wipe and retract
G1 X108.138 Y98.866 E-0.05227 ; wipe and retract
G1 X107.774 Y98.546 E-0.12793 ; wipe and retract
G1 X107.437 Y98.297 E-0.11055 ; wipe and retract
G1 X107.128 Y98.008 E-0.11179 ; wipe and retract
G1 X106.987 Y97.846 E-0.05674 ; wipe and retract
G1 X106.914 Y97.657 E-0.05343 ; wipe and retract
G1 X106.892 Y97.379 E-0.07368 ; wipe and retract
G1 X106.977 Y97.099 E-0.07712 ; wipe and retract
G1 X107.035 Y96.999 E-0.03048 ; wipe and retract
G1 X107.204 Y96.886 E-0.05366 ; wipe and retract
G1 X107.316 Y96.873 E-0.02979 ; wipe and retract
G1 X107.750 Y97.078 E-0.12646 ; wipe and retract
G1 X108.052 Y97.355 E-0.10818 ; wipe and retract
G1 X108.222 Y97.659 E-0.09178 ; wipe and retract
G1 X108.696 Y98.054 E-0.16294 ; wipe and retract
G1 X108.978 Y98.365 E-0.11073 ; wipe and retract
;WIPE_END
G1 E-0.59572 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X110.165 Y100.676 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.287 Y100.744 E0.00647 ; perimeter
G1 X110.419 Y100.769 E0.00623 ; perimeter
G1 X110.579 Y100.944 E0.01096 ; perimeter
G1 X110.637 Y101.065 E0.00626 ; perimeter
G1 X110.612 Y101.344 E0.01295 ; perimeter
G1 X110.533 Y101.478 E0.00724 ; perimeter
G1 X110.442 Y101.553 E0.00545 ; perimeter
G1 X110.296 Y101.603 E0.00716 ; perimeter
G1 X110.197 Y101.595 E0.00461 ; perimeter
G1 X109.926 Y101.502 E0.01327 ; perimeter
G1 X109.822 Y101.385 E0.00723 ; perimeter
G1 X109.759 Y101.193 E0.00935 ; perimeter
G1 X109.787 Y100.894 E0.01390 ; perimeter
G1 X109.866 Y100.779 E0.00648 ; perimeter
G1 X110.106 Y100.687 E0.01192 ; perimeter
G1 X110.214 Y100.807 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.287 Y100.744 E-0.05007 ; wipe and retract
G1 X110.419 Y100.769 E-0.03548 ; wipe and retract
G1 X110.579 Y100.944 E-0.06245 ; wipe and retract
G1 X110.637 Y101.065 E-0.03566 ; wipe and retract
G1 X110.612 Y101.344 E-0.07379 ; wipe and retract
G1 X110.533 Y101.478 E-0.04125 ; wipe and retract
G1 X110.442 Y101.553 E-0.03107 ; wipe and retract
G1 X110.296 Y101.603 E-0.04076 ; wipe and retract
G1 X110.197 Y101.595 E-0.02624 ; wipe and retract
G1 X109.926 Y101.502 E-0.07559 ; wipe and retract
G1 X109.822 Y101.385 E-0.04119 ; wipe and retract
G1 X109.759 Y101.193 E-0.05325 ; wipe and retract
G1 X109.787 Y100.894 E-0.07921 ; wipe and retract
G1 X109.866 Y100.779 E-0.03690 ; wipe and retract
G1 X110.106 Y100.687 E-0.06792 ; wipe and retract
;WIPE_END
G1 E-1.64917 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X111.756 Y102.456 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.771 Y102.424 E0.00168 ; perimeter
G1 X111.864 Y102.350 E0.00547 ; perimeter
G1 X112.008 Y102.326 E0.00676 ; perimeter
G1 X112.161 Y102.363 E0.00730 ; perimeter
G1 X112.823 Y102.694 E0.03430 ; perimeter
G1 X113.047 Y102.672 E0.01043 ; perimeter
G1 X113.360 Y102.705 E0.01454 ; perimeter
G1 X114.205 Y102.642 E0.03926 ; perimeter
G1 X114.444 Y102.724 E0.01172 ; perimeter
G1 X114.581 Y102.851 E0.00863 ; perimeter
G1 X114.623 Y102.945 E0.00480 ; perimeter
G1 X114.633 Y103.063 E0.00549 ; perimeter
G1 X114.598 Y103.206 E0.00681 ; perimeter
G1 X114.535 Y103.307 E0.00550 ; perimeter
G1 X114.364 Y103.408 E0.00922 ; perimeter
G1 X113.861 Y103.470 E0.02348 ; perimeter
G1 X113.156 Y103.522 E0.03274 ; perimeter
G1 X112.906 Y103.496 E0.01166 ; perimeter
G1 X112.112 Y103.288 E0.03801 ; perimeter
G1 X111.848 Y103.085 E0.01545 ; perimeter
G1 X111.729 Y102.895 E0.01037 ; perimeter
G1 X111.679 Y102.698 E0.00939 ; perimeter
G1 X111.736 Y102.599 E0.00530 ; perimeter
G1 X111.748 Y102.516 E0.00391 ; perimeter
G1 X111.792 Y102.452 F10800.000 ; move inwards before travel
G1 X111.962 Y102.690 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3274
G1 F2400.000
G1 X112.305 Y102.905 E0.00956 ; infill
G1 X112.791 Y103.082 E0.01223 ; infill
;WIDTH:0.353335
G1 X112.879 Y103.086 E0.00229 ; infill
;WIDTH:0.360444
G1 X113.368 Y103.106 E0.01290 ; infill
G1 X114.387 Y103.016 E0.02702 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.368 Y103.106 E-0.27004 ; wipe and retract
G1 X112.879 Y103.086 E-0.12898 ; wipe and retract
;WIPE_END
G1 E-2.00098 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X115.298 Y105.224 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.399 Y105.181 E0.00505 ; perimeter
G1 X115.653 Y105.193 E0.01179 ; perimeter
G1 X115.726 Y105.227 E0.00374 ; perimeter
G1 X115.854 Y105.373 E0.00901 ; perimeter
G1 X115.889 Y105.484 E0.00538 ; perimeter
G1 X115.880 Y105.721 E0.01099 ; perimeter
G1 X115.788 Y105.884 E0.00867 ; perimeter
G1 X115.708 Y105.940 E0.00453 ; perimeter
G1 X115.524 Y105.990 E0.00882 ; perimeter
G1 X115.400 Y105.973 E0.00580 ; perimeter
G1 X115.255 Y105.888 E0.00778 ; perimeter
G1 X115.183 Y105.800 E0.00527 ; perimeter
G1 X115.147 Y105.720 E0.00406 ; perimeter
G1 X115.137 Y105.520 E0.00927 ; perimeter
G1 X115.173 Y105.373 E0.00704 ; perimeter
G1 X115.252 Y105.262 E0.00631 ; perimeter
G1 X115.398 Y105.268 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.399 Y105.181 E-0.04417 ; wipe and retract
G1 X115.653 Y105.193 E-0.06714 ; wipe and retract
G1 X115.726 Y105.227 E-0.02131 ; wipe and retract
G1 X115.854 Y105.373 E-0.05133 ; wipe and retract
G1 X115.889 Y105.484 E-0.03065 ; wipe and retract
G1 X115.880 Y105.721 E-0.06260 ; wipe and retract
G1 X115.788 Y105.884 E-0.04936 ; wipe and retract
G1 X115.708 Y105.940 E-0.02582 ; wipe and retract
G1 X115.524 Y105.990 E-0.05022 ; wipe and retract
G1 X115.400 Y105.973 E-0.03307 ; wipe and retract
G1 X115.255 Y105.888 E-0.04431 ; wipe and retract
G1 X115.183 Y105.800 E-0.02999 ; wipe and retract
G1 X115.147 Y105.720 E-0.02313 ; wipe and retract
G1 X115.137 Y105.520 E-0.05284 ; wipe and retract
G1 X115.173 Y105.373 E-0.04009 ; wipe and retract
G1 X115.252 Y105.262 E-0.03593 ; wipe and retract
;WIPE_END
G1 E-1.73803 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X115.582 Y111.278 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.705 Y111.321 E0.00603 ; perimeter
G1 X115.811 Y111.428 E0.00697 ; perimeter
G1 X115.880 Y111.712 E0.01352 ; perimeter
G1 X115.850 Y111.912 E0.00937 ; perimeter
G1 X115.774 Y112.053 E0.00744 ; perimeter
G1 X115.677 Y112.124 E0.00557 ; perimeter
G1 X115.471 Y112.156 E0.00964 ; perimeter
G1 X115.261 Y112.053 E0.01084 ; perimeter
G1 X115.162 Y111.775 E0.01367 ; perimeter
G1 X115.165 Y111.596 E0.00827 ; perimeter
G1 X115.241 Y111.410 E0.00932 ; perimeter
G1 X115.432 Y111.287 E0.01052 ; perimeter
G1 X115.522 Y111.281 E0.00420 ; perimeter
G1 X115.635 Y111.397 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.705 Y111.321 E-0.04936 ; wipe and retract
G1 X115.811 Y111.428 E-0.03970 ; wipe and retract
G1 X115.880 Y111.712 E-0.07701 ; wipe and retract
G1 X115.850 Y111.912 E-0.05341 ; wipe and retract
G1 X115.774 Y112.053 E-0.04237 ; wipe and retract
G1 X115.677 Y112.124 E-0.03171 ; wipe and retract
G1 X115.471 Y112.156 E-0.05490 ; wipe and retract
G1 X115.261 Y112.053 E-0.06178 ; wipe and retract
G1 X115.162 Y111.775 E-0.07787 ; wipe and retract
G1 X115.165 Y111.596 E-0.04711 ; wipe and retract
G1 X115.241 Y111.410 E-0.05307 ; wipe and retract
G1 X115.432 Y111.287 E-0.05991 ; wipe and retract
G1 X115.522 Y111.281 E-0.02390 ; wipe and retract
;WIPE_END
G1 E-1.72792 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X115.432 Y114.670 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.529 Y114.713 E0.00491 ; perimeter
G1 X115.598 Y114.775 E0.00427 ; perimeter
G1 X115.677 Y114.915 E0.00747 ; perimeter
G1 X115.706 Y115.039 E0.00590 ; perimeter
G1 X115.655 Y115.246 E0.00986 ; perimeter
G1 X115.536 Y115.394 E0.00881 ; perimeter
G1 X115.100 Y115.781 E0.02699 ; perimeter
G1 X114.873 Y115.942 E0.01289 ; perimeter
G1 X114.705 Y115.998 E0.00821 ; perimeter
G1 X114.525 Y115.979 E0.00841 ; perimeter
G1 X114.409 Y115.888 E0.00680 ; perimeter
G1 X114.266 Y115.659 E0.01251 ; perimeter
G1 X114.279 Y115.405 E0.01180 ; perimeter
G1 X114.465 Y115.210 E0.01249 ; perimeter
G1 X115.011 Y114.753 E0.03295 ; perimeter
G1 X115.145 Y114.687 E0.00693 ; perimeter
G1 X115.372 Y114.666 E0.01058 ; perimeter
G1 X115.465 Y114.771 F10800.000 ; move inwards before travel
G1 X115.402 Y114.923 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.168692
G1 F2400.000
G1 X115.359 Y114.970 E0.00067 ; infill
;WIDTH:0.198625
G1 X115.173 Y115.265 E0.00451 ; infill
;WIDTH:0.228557
G1 X114.987 Y115.559 E0.00538 ; infill
G1 X115.045 Y115.039 F10800.000 ; move to first infill point
;WIDTH:0.255359
G1 F2400.000
G1 X114.827 Y115.388 E0.00728 ; infill
;WIDTH:0.22661
G1 X114.608 Y115.738 E0.00630 ; infill
G1 X114.656 Y115.750 F10800.000 ; move to first infill point
;WIDTH:0.322637
G1 F2400.000
G1 X114.692 Y115.567 E0.00436 ; infill
G1 X115.315 Y115.050 E0.01882 ; infill
G1 X115.457 Y115.033 E0.00332 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.315 Y115.050 E-0.03766 ; wipe and retract
G1 X114.692 Y115.567 E-0.21357 ; wipe and retract
G1 X114.656 Y115.750 E-0.04949 ; wipe and retract
;WIPE_END
G1 E-2.09927 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 X112.025 Y115.472 ; move to first perimeter point
G1 Z12.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.105 Y115.560 E0.00549 ; perimeter
G1 X112.143 Y115.662 E0.00505 ; perimeter
G1 X112.153 Y115.785 E0.00572 ; perimeter
G1 X112.133 Y115.900 E0.00544 ; perimeter
G1 X112.066 Y116.021 E0.00637 ; perimeter
G1 X111.952 Y116.103 E0.00650 ; perimeter
G1 X111.804 Y116.134 E0.00702 ; perimeter
G1 X111.640 Y116.133 E0.00759 ; perimeter
G1 X111.469 Y116.068 E0.00847 ; perimeter
G1 X111.371 Y115.928 E0.00791 ; perimeter
G1 X111.344 Y115.710 E0.01019 ; perimeter
G1 X111.356 Y115.617 E0.00433 ; perimeter
G1 X111.431 Y115.501 E0.00638 ; perimeter
G1 X111.510 Y115.445 E0.00449 ; perimeter
G1 X111.641 Y115.402 E0.00639 ; perimeter
G1 X111.871 Y115.412 E0.01065 ; perimeter
G1 X111.969 Y115.450 E0.00488 ; perimeter
G1 X112.014 Y115.590 F10800.000 ; move inwards before travel
G1 X111.717 Y115.769 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.287294
G1 F2400.000
G1 X111.790 Y115.769 E0.00149 ; infill
;LAYER_CHANGE
;Z:12.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;12.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.717 Y115.769 E-0.01935 ; wipe and retract
;WIPE_END
G1 E-2.38065 F2400.000 ; retract
G1 Z12.475 F10800.000 ; lift Z
G1 Z12.600 ; move to next layer (62)
;AFTER_LAYER_CHANGE
;12.6
G1 Z12.675 ; lift Z
G1 X108.648 Y112.638 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.636 Y112.812 E0.00811 ; perimeter
G1 X108.607 Y112.886 E0.00366 ; perimeter
G1 X108.523 Y112.958 E0.00514 ; perimeter
G1 X108.301 Y112.967 E0.01026 ; perimeter
G1 X108.030 Y112.848 E0.01371 ; perimeter
G1 X107.778 Y112.614 E0.01593 ; perimeter
G1 X107.598 Y112.303 E0.01666 ; perimeter
G1 X107.550 Y112.138 E0.00795 ; perimeter
G1 X107.562 Y111.863 E0.01274 ; perimeter
G1 X107.819 Y111.756 E0.01290 ; perimeter
G1 X108.065 Y111.845 E0.01213 ; perimeter
G1 X108.353 Y112.067 E0.01683 ; perimeter
G1 X108.598 Y112.444 E0.02085 ; perimeter
G1 X108.633 Y112.580 E0.00648 ; perimeter
G1 X108.508 Y112.742 F10800.000 ; move inwards before travel
G1 X108.384 Y112.722 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.152032
G1 F2400.000
G1 X108.013 Y112.110 E0.00650 ; infill
G1 X107.816 Y112.018 F10800.000 ; move to first infill point
;WIDTH:0.250796
G1 F2400.000
G1 X107.917 Y112.167 E0.00311 ; infill
;WIDTH:0.293751
G1 X107.991 Y112.250 E0.00231 ; infill
;WIDTH:0.310834
G1 X108.383 Y112.722 E0.01367 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.991 Y112.250 E-0.16192 ; wipe and retract
;WIPE_END
G1 E-2.23808 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X111.420 Y115.482 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.489 Y115.437 E0.00380 ; perimeter
G1 X111.636 Y115.401 E0.00702 ; perimeter
G1 X111.845 Y115.413 E0.00971 ; perimeter
G1 X111.978 Y115.465 E0.00663 ; perimeter
G1 X112.076 Y115.569 E0.00660 ; perimeter
G1 X112.112 Y115.670 E0.00499 ; perimeter
G1 X112.097 Y115.902 E0.01076 ; perimeter
G1 X112.033 Y116.020 E0.00620 ; perimeter
G1 X111.949 Y116.090 E0.00510 ; perimeter
G1 X111.790 Y116.132 E0.00760 ; perimeter
G1 X111.637 Y116.134 E0.00709 ; perimeter
G1 X111.446 Y116.073 E0.00928 ; perimeter
G1 X111.349 Y115.940 E0.00762 ; perimeter
G1 X111.317 Y115.679 E0.01218 ; perimeter
G1 X111.341 Y115.592 E0.00415 ; perimeter
G1 X111.390 Y115.534 E0.00354 ; perimeter
G1 X111.498 Y115.506 F10800.000 ; move inwards before travel
G1 X111.752 Y115.769 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.285791
G1 F2400.000
G1 X111.695 Y115.769 E0.00114 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.752 Y115.769 E-0.01488 ; wipe and retract
;WIPE_END
G1 E-2.38512 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X114.266 Y115.555 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.299 Y115.404 E0.00719 ; perimeter
G1 X114.476 Y115.205 E0.01233 ; perimeter
G1 X115.036 Y114.732 E0.03396 ; perimeter
G1 X115.147 Y114.677 E0.00574 ; perimeter
G1 X115.322 Y114.647 E0.00822 ; perimeter
G1 X115.432 Y114.654 E0.00508 ; perimeter
G1 X115.540 Y114.703 E0.00552 ; perimeter
G1 X115.609 Y114.764 E0.00425 ; perimeter
G1 X115.691 Y114.913 E0.00792 ; perimeter
G1 X115.716 Y115.019 E0.00505 ; perimeter
G1 X115.663 Y115.233 E0.01019 ; perimeter
G1 X115.559 Y115.369 E0.00797 ; perimeter
G1 X115.101 Y115.783 E0.02857 ; perimeter
G1 X114.872 Y115.946 E0.01301 ; perimeter
G1 X114.735 Y115.995 E0.00677 ; perimeter
G1 X114.540 Y115.979 E0.00907 ; perimeter
G1 X114.418 Y115.888 E0.00707 ; perimeter
G1 X114.264 Y115.615 E0.01450 ; perimeter
G1 X114.396 Y115.471 F10800.000 ; move inwards before travel
G1 X114.616 Y115.736 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.24744
G1 F2400.000
G1 X114.651 Y115.679 E0.00112 ; infill
;WIDTH:0.294627
G1 X114.685 Y115.623 E0.00138 ; infill
;WIDTH:0.32792
G1 X114.692 Y115.603 E0.00051 ; infill
;WIDTH:0.38344
G1 X114.700 Y115.568 E0.00102 ; infill
G1 X115.275 Y115.069 E0.02157 ; infill
;WIDTH:0.285631
G1 X115.341 Y114.995 E0.00199 ; infill
;WIDTH:0.172161
G1 X115.413 Y114.912 E0.00118 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.341 Y114.995 E-0.02899 ; wipe and retract
;WIPE_END
G1 E-2.37101 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X115.471 Y112.222 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.260 Y112.115 E0.01097 ; perimeter
G1 X115.158 Y111.831 E0.01397 ; perimeter
G1 X115.166 Y111.668 E0.00759 ; perimeter
G1 X115.260 Y111.455 E0.01074 ; perimeter
G1 X115.403 Y111.367 E0.00781 ; perimeter
G1 X115.536 Y111.350 E0.00621 ; perimeter
G1 X115.703 Y111.401 E0.00809 ; perimeter
G1 X115.824 Y111.541 E0.00855 ; perimeter
G1 X115.876 Y111.739 E0.00949 ; perimeter
G1 X115.839 Y112.021 E0.01317 ; perimeter
G1 X115.781 Y112.121 E0.00534 ; perimeter
G1 X115.658 Y112.202 E0.00682 ; perimeter
G1 X115.531 Y112.215 E0.00593 ; perimeter
G1 X115.397 Y111.997 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.260 Y112.115 E-0.07629 ; wipe and retract
G1 X115.158 Y111.831 E-0.07960 ; wipe and retract
G1 X115.166 Y111.668 E-0.04324 ; wipe and retract
G1 X115.260 Y111.455 E-0.06119 ; wipe and retract
G1 X115.403 Y111.367 E-0.04448 ; wipe and retract
G1 X115.536 Y111.350 E-0.03536 ; wipe and retract
G1 X115.703 Y111.401 E-0.04609 ; wipe and retract
G1 X115.824 Y111.541 E-0.04871 ; wipe and retract
G1 X115.876 Y111.739 E-0.05406 ; wipe and retract
G1 X115.839 Y112.021 E-0.07502 ; wipe and retract
G1 X115.781 Y112.121 E-0.03043 ; wipe and retract
G1 X115.658 Y112.202 E-0.03886 ; wipe and retract
G1 X115.531 Y112.215 E-0.03379 ; wipe and retract
;WIPE_END
G1 E-1.73288 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X115.414 Y105.957 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.254 Y105.868 E0.00848 ; perimeter
G1 X115.147 Y105.688 E0.00971 ; perimeter
G1 X115.136 Y105.512 E0.00813 ; perimeter
G1 X115.169 Y105.359 E0.00726 ; perimeter
G1 X115.224 Y105.264 E0.00508 ; perimeter
G1 X115.288 Y105.210 E0.00389 ; perimeter
G1 X115.396 Y105.162 E0.00547 ; perimeter
G1 X115.650 Y105.172 E0.01177 ; perimeter
G1 X115.746 Y105.218 E0.00495 ; perimeter
G1 X115.810 Y105.282 E0.00419 ; perimeter
G1 X115.876 Y105.402 E0.00632 ; perimeter
G1 X115.892 Y105.507 E0.00496 ; perimeter
G1 X115.880 Y105.699 E0.00891 ; perimeter
G1 X115.793 Y105.853 E0.00815 ; perimeter
G1 X115.706 Y105.916 E0.00500 ; perimeter
G1 X115.523 Y105.969 E0.00881 ; perimeter
G1 X115.474 Y105.964 E0.00231 ; perimeter
G1 X115.372 Y105.779 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.254 Y105.868 E-0.06320 ; wipe and retract
G1 X115.147 Y105.688 E-0.05534 ; wipe and retract
G1 X115.136 Y105.512 E-0.04630 ; wipe and retract
G1 X115.169 Y105.359 E-0.04134 ; wipe and retract
G1 X115.224 Y105.264 E-0.02896 ; wipe and retract
G1 X115.288 Y105.210 E-0.02219 ; wipe and retract
G1 X115.396 Y105.162 E-0.03116 ; wipe and retract
G1 X115.650 Y105.172 E-0.06707 ; wipe and retract
G1 X115.746 Y105.218 E-0.02820 ; wipe and retract
G1 X115.810 Y105.282 E-0.02387 ; wipe and retract
G1 X115.876 Y105.402 E-0.03599 ; wipe and retract
G1 X115.892 Y105.507 E-0.02823 ; wipe and retract
G1 X115.880 Y105.699 E-0.05078 ; wipe and retract
G1 X115.793 Y105.853 E-0.04645 ; wipe and retract
G1 X115.706 Y105.916 E-0.02851 ; wipe and retract
G1 X115.523 Y105.969 E-0.05020 ; wipe and retract
G1 X115.474 Y105.964 E-0.01314 ; wipe and retract
;WIPE_END
G1 E-1.73906 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X114.467 Y103.316 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.277 Y103.422 E0.01009 ; perimeter
G1 X113.494 Y103.507 E0.03648 ; perimeter
G1 X112.935 Y103.445 E0.02606 ; perimeter
G1 X112.032 Y103.175 E0.04364 ; perimeter
G1 X111.839 Y103.042 E0.01089 ; perimeter
G1 X111.679 Y102.832 E0.01221 ; perimeter
G1 X111.606 Y102.530 E0.01439 ; perimeter
G1 X111.662 Y102.260 E0.01277 ; perimeter
G1 X111.708 Y102.230 E0.00255 ; perimeter
G1 X111.980 Y102.214 E0.01262 ; perimeter
G1 X112.190 Y102.272 E0.01011 ; perimeter
G1 X112.284 Y102.356 E0.00582 ; perimeter
G1 X112.452 Y102.451 E0.00896 ; perimeter
G1 X112.538 Y102.577 E0.00706 ; perimeter
G1 X112.863 Y102.717 E0.01637 ; perimeter
G1 X113.828 Y102.624 E0.04492 ; perimeter
G1 X114.004 Y102.639 E0.00819 ; perimeter
G1 X114.141 Y102.629 E0.00636 ; perimeter
G1 X114.396 Y102.723 E0.01262 ; perimeter
G1 X114.506 Y102.816 E0.00664 ; perimeter
G1 X114.556 Y102.936 E0.00605 ; perimeter
G1 X114.564 Y103.080 E0.00669 ; perimeter
G1 X114.532 Y103.213 E0.00634 ; perimeter
G1 X114.499 Y103.265 E0.00282 ; perimeter
G1 X114.260 Y103.248 F10800.000 ; move inwards before travel
G1 X114.319 Y103.016 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.369186
G1 F2400.000
G1 X113.494 Y103.081 E0.02245 ; infill
G1 X113.252 Y103.079 E0.00658 ; infill
;WIDTH:0.357403
G1 X113.009 Y103.078 E0.00634 ; infill
;WIDTH:0.307709
G1 X112.921 Y103.069 E0.00194 ; infill
;WIDTH:0.273784
G1 X112.834 Y103.061 E0.00169 ; infill
;WIDTH:0.239859
G1 X112.330 Y102.884 E0.00874 ; infill
G1 X111.887 Y102.646 E0.00823 ; infill
G1 X111.874 Y102.581 F10800.000 ; move to first infill point
;WIDTH:0.388289
G1 F2400.000
G1 X112.165 Y102.764 E0.00987 ; infill
G1 X112.448 Y103.048 E0.01151 ; infill
G1 X112.439 Y103.045 F10800.000 ; move to first infill point
;WIDTH:0.351675
G1 F2400.000
G1 X112.044 Y102.666 E0.01405 ; infill
;WIDTH:0.34251
G1 X111.924 Y102.459 E0.00597 ; infill
G1 X110.579 Y101.528 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.402 Y101.579 E0.00852 ; perimeter
G1 X110.158 Y101.551 E0.01139 ; perimeter
G1 X109.978 Y101.477 E0.00899 ; perimeter
G1 X109.871 Y101.357 E0.00746 ; perimeter
G1 X109.808 Y101.166 E0.00934 ; perimeter
G1 X109.844 Y100.920 E0.01151 ; perimeter
G1 X109.990 Y100.755 E0.01018 ; perimeter
G1 X110.113 Y100.684 E0.00659 ; perimeter
G1 X110.410 Y100.697 E0.01375 ; perimeter
G1 X110.515 Y100.765 E0.00581 ; perimeter
G1 X110.657 Y100.925 E0.00991 ; perimeter
G1 X110.706 Y101.048 E0.00613 ; perimeter
G1 X110.697 Y101.159 E0.00518 ; perimeter
G1 X110.714 Y101.267 E0.00507 ; perimeter
G1 X110.680 Y101.379 E0.00542 ; perimeter
G1 X110.611 Y101.477 E0.00557 ; perimeter
G1 X110.417 Y101.441 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.402 Y101.579 E-0.06131 ; wipe and retract
G1 X110.158 Y101.551 E-0.06489 ; wipe and retract
G1 X109.978 Y101.477 E-0.05121 ; wipe and retract
G1 X109.871 Y101.357 E-0.04248 ; wipe and retract
G1 X109.808 Y101.166 E-0.05320 ; wipe and retract
G1 X109.844 Y100.920 E-0.06556 ; wipe and retract
G1 X109.990 Y100.755 E-0.05800 ; wipe and retract
G1 X110.113 Y100.684 E-0.03753 ; wipe and retract
G1 X110.410 Y100.697 E-0.07836 ; wipe and retract
G1 X110.515 Y100.765 E-0.03309 ; wipe and retract
G1 X110.657 Y100.925 E-0.05646 ; wipe and retract
G1 X110.706 Y101.048 E-0.03494 ; wipe and retract
G1 X110.697 Y101.159 E-0.02951 ; wipe and retract
G1 X110.714 Y101.267 E-0.02890 ; wipe and retract
G1 X110.680 Y101.379 E-0.03089 ; wipe and retract
G1 X110.611 Y101.477 E-0.03172 ; wipe and retract
;WIPE_END
G1 E-1.64195 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X105.831 Y107.368 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.202 Y107.466 E0.01778 ; perimeter
G1 X106.319 Y107.525 E0.00606 ; perimeter
G1 X106.564 Y107.595 E0.01182 ; perimeter
G1 X106.943 Y107.799 E0.01992 ; perimeter
G1 X107.078 Y107.961 E0.00977 ; perimeter
G1 X107.142 Y108.124 E0.00813 ; perimeter
G1 X107.146 Y108.358 E0.01082 ; perimeter
G1 X107.069 Y108.557 E0.00987 ; perimeter
G1 X106.761 Y108.813 E0.01857 ; perimeter
G1 X106.628 Y108.860 E0.00654 ; perimeter
G1 X106.524 Y108.784 E0.00597 ; perimeter
G1 X106.261 Y108.403 E0.02143 ; perimeter
G1 X106.073 Y108.057 E0.01826 ; perimeter
G1 X105.756 Y107.584 E0.02637 ; perimeter
G1 X105.413 Y107.309 E0.02039 ; perimeter
G1 X104.967 Y107.143 E0.02201 ; perimeter
G1 X104.705 Y107.109 E0.01225 ; perimeter
G1 X104.550 Y107.015 E0.00841 ; perimeter
G1 X104.097 Y106.802 E0.02317 ; perimeter
G1 X103.335 Y106.553 E0.03714 ; perimeter
G1 X103.031 Y106.359 E0.01670 ; perimeter
G1 X102.347 Y105.705 E0.04387 ; perimeter
G1 X102.111 Y105.508 E0.01422 ; perimeter
G1 X102.016 Y105.389 E0.00706 ; perimeter
G1 X101.802 Y105.217 E0.01272 ; perimeter
G1 X101.497 Y104.875 E0.02120 ; perimeter
G1 X101.079 Y104.177 E0.03770 ; perimeter
G1 X100.988 Y103.937 E0.01187 ; perimeter
G1 X100.870 Y103.806 E0.00818 ; perimeter
G1 X100.714 Y103.546 E0.01402 ; perimeter
G1 X100.617 Y103.436 E0.00680 ; perimeter
G1 X100.409 Y103.076 E0.01928 ; perimeter
G1 X100.280 Y102.658 E0.02025 ; perimeter
G1 X100.276 Y102.319 E0.01572 ; perimeter
G1 X100.310 Y102.216 E0.00502 ; perimeter
G1 X100.454 Y102.182 E0.00686 ; perimeter
G1 X100.672 Y102.253 E0.01061 ; perimeter
G1 X100.755 Y102.307 E0.00461 ; perimeter
G1 X100.832 Y102.408 E0.00588 ; perimeter
G1 X100.971 Y102.538 E0.00882 ; perimeter
G1 X101.160 Y102.833 E0.01623 ; perimeter
G1 X101.537 Y103.670 E0.04253 ; perimeter
G1 X101.838 Y104.013 E0.02114 ; perimeter
G1 X102.164 Y104.471 E0.02605 ; perimeter
G1 X102.617 Y105.428 E0.04904 ; perimeter
G1 X102.931 Y105.761 E0.02119 ; perimeter
G1 X103.052 Y105.835 E0.00657 ; perimeter
G1 X104.108 Y105.947 E0.04918 ; perimeter
G1 X104.365 Y106.000 E0.01216 ; perimeter
G1 X104.662 Y106.106 E0.01460 ; perimeter
G1 X104.953 Y106.283 E0.01577 ; perimeter
G1 X105.241 Y106.530 E0.01759 ; perimeter
G1 X105.392 Y106.759 E0.01269 ; perimeter
G1 X105.385 Y106.803 E0.00207 ; perimeter
G1 X105.553 Y107.059 E0.01417 ; perimeter
G1 X105.791 Y107.323 E0.01648 ; perimeter
G1 X105.850 Y107.751 F10800.000 ; move inwards before travel
G1 X106.182 Y107.748 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.232345
G1 F2400.000
G1 X106.904 Y108.300 E0.01431 ; infill
G1 X106.746 Y108.512 F10800.000 ; move to first infill point
;WIDTH:0.375289
G1 F2400.000
G1 X106.702 Y108.256 E0.00718 ; infill
;WIDTH:0.472439
G1 X106.649 Y108.160 E0.00391 ; infill
G1 X106.178 Y107.753 E0.02224 ; infill
G1 X105.156 Y106.947 F10800.000 ; move to first infill point
;WIDTH:0.385882
G1 F2400.000
G1 X104.737 Y106.645 E0.01474 ; infill
G1 X104.474 Y106.500 E0.00856 ; infill
G1 X104.251 Y106.408 E0.00689 ; infill
G1 X103.756 Y106.291 E0.01449 ; infill
;WIDTH:0.341705
G1 X103.468 Y106.230 E0.00732 ; infill
;WIDTH:0.301617
G1 X103.180 Y106.168 E0.00634 ; infill
G1 X102.224 Y105.203 F10800.000 ; move to first infill point
;WIDTH:0.238636
G1 F2400.000
G1 X101.935 Y104.821 E0.00780 ; infill
;WIDTH:0.332361
G1 X101.548 Y104.242 E0.01674 ; infill
;WIDTH:0.298136
G1 X101.390 Y104.026 E0.00568 ; infill
;WIDTH:0.250272
G1 X101.336 Y103.936 E0.00182 ; infill
;WIDTH:0.212997
G1 X101.282 Y103.845 E0.00149 ; infill
;WIDTH:0.175723
G1 X101.005 Y103.347 E0.00630 ; infill
;WIDTH:0.269715
G1 X100.762 Y102.922 E0.00923 ; infill
G1 X100.552 Y102.467 E0.00945 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.762 Y102.922 E-0.13219 ; wipe and retract
G1 X101.005 Y103.347 E-0.12923 ; wipe and retract
;WIPE_END
G1 E-2.13859 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X98.985 Y99.191 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.803 Y99.126 E0.00897 ; perimeter
G1 X98.653 Y98.990 E0.00937 ; perimeter
G1 X98.595 Y98.776 E0.01026 ; perimeter
G1 X98.585 Y98.522 E0.01179 ; perimeter
G1 X98.646 Y98.360 E0.00800 ; perimeter
G1 X98.784 Y98.204 E0.00965 ; perimeter
G1 X98.890 Y98.023 E0.00974 ; perimeter
G1 X99.085 Y97.928 E0.01003 ; perimeter
G1 X99.101 Y97.898 E0.00159 ; perimeter
G1 X99.204 Y97.900 E0.00477 ; perimeter
G1 X99.294 Y97.967 E0.00519 ; perimeter
G1 X99.409 Y98.419 E0.02163 ; perimeter
G1 X99.452 Y98.758 E0.01581 ; perimeter
G1 X99.412 Y98.904 E0.00704 ; perimeter
G1 X99.300 Y99.074 E0.00941 ; perimeter
G1 X99.146 Y99.167 E0.00835 ; perimeter
G1 X99.045 Y99.182 E0.00473 ; perimeter
G1 X98.908 Y99.014 F10800.000 ; move inwards before travel
G1 X98.979 Y98.933 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.147789
G1 F2400.000
G1 X99.083 Y98.170 E0.00671 ; infill
G1 X99.093 Y98.185 F10800.000 ; move to first infill point
;WIDTH:0.252798
G1 F2400.000
G1 X98.960 Y98.926 E0.01313 ; infill
G1 X99.014 Y98.770 F10800.000 ; move to first infill point
;WIDTH:0.408981
G1 F2400.000
G1 X99.021 Y98.726 E0.00134 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.014 Y98.770 E-0.01161 ; wipe and retract
;WIPE_END
G1 E-2.38839 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X99.333 Y96.363 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.170 Y96.273 E0.00862 ; perimeter
G1 X99.074 Y96.128 E0.00805 ; perimeter
G1 X98.967 Y96.030 E0.00674 ; perimeter
G1 X98.937 Y95.966 E0.00328 ; perimeter
G1 X98.942 Y95.877 E0.00412 ; perimeter
G1 X98.917 Y95.748 E0.00610 ; perimeter
G1 X98.940 Y95.620 E0.00602 ; perimeter
G1 X99.015 Y95.450 E0.00863 ; perimeter
G1 X99.112 Y95.322 E0.00742 ; perimeter
G1 X99.287 Y95.248 E0.00883 ; perimeter
G1 X99.468 Y95.244 E0.00837 ; perimeter
G1 X99.601 Y95.293 E0.00656 ; perimeter
G1 X99.633 Y95.368 E0.00379 ; perimeter
G1 X99.697 Y95.423 E0.00391 ; perimeter
G1 X99.777 Y95.601 E0.00903 ; perimeter
G1 X99.765 Y95.839 E0.01102 ; perimeter
G1 X99.627 Y96.174 E0.01682 ; perimeter
G1 X99.383 Y96.331 E0.01340 ; perimeter
G1 X99.247 Y96.198 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.170 Y96.273 E-0.05830 ; wipe and retract
G1 X99.074 Y96.128 E-0.04587 ; wipe and retract
G1 X98.967 Y96.030 E-0.03837 ; wipe and retract
G1 X98.937 Y95.966 E-0.01867 ; wipe and retract
G1 X98.942 Y95.877 E-0.02346 ; wipe and retract
G1 X98.917 Y95.748 E-0.03473 ; wipe and retract
G1 X98.940 Y95.620 E-0.03429 ; wipe and retract
G1 X99.015 Y95.450 E-0.04914 ; wipe and retract
G1 X99.112 Y95.322 E-0.04227 ; wipe and retract
G1 X99.287 Y95.248 E-0.05030 ; wipe and retract
G1 X99.468 Y95.244 E-0.04767 ; wipe and retract
G1 X99.601 Y95.293 E-0.03740 ; wipe and retract
G1 X99.633 Y95.368 E-0.02157 ; wipe and retract
G1 X99.697 Y95.423 E-0.02227 ; wipe and retract
G1 X99.777 Y95.601 E-0.05145 ; wipe and retract
G1 X99.765 Y95.839 E-0.06279 ; wipe and retract
G1 X99.627 Y96.174 E-0.09583 ; wipe and retract
G1 X99.383 Y96.331 E-0.07634 ; wipe and retract
;WIPE_END
G1 E-1.58928 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X107.409 Y97.300 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.565 Y97.393 E0.00614 ; perimeter
G1 X107.891 Y97.696 E0.01505 ; perimeter
G1 X107.916 Y97.741 E0.00174 ; perimeter
G1 X108.290 Y98.108 E0.01776 ; perimeter
G1 X108.604 Y98.364 E0.01372 ; perimeter
G1 X108.577 Y98.397 E0.00142 ; perimeter
G1 X108.564 Y98.538 E0.00480 ; perimeter
G1 X108.027 Y98.095 E0.02357 ; perimeter
G1 X107.487 Y97.497 E0.02725 ; perimeter
G1 X107.423 Y97.358 E0.00519 ; perimeter
G1 X108.475 Y99.034 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.332 Y98.972 E0.00721 ; perimeter
G1 X107.693 Y98.444 E0.03843 ; perimeter
G1 X107.080 Y97.766 E0.04232 ; perimeter
G1 X106.942 Y97.466 E0.01527 ; perimeter
G1 X106.887 Y96.949 E0.02409 ; perimeter
G1 X106.836 Y96.679 E0.01273 ; perimeter
G1 X106.844 Y96.515 E0.00762 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.849 Y96.512 E0.00023 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.080 Y96.590 E0.01128 ; perimeter
G1 X107.453 Y96.765 E0.01909 ; perimeter
G1 X107.856 Y97.006 E0.02174 ; perimeter
G1 X108.275 Y97.395 E0.02652 ; perimeter
G1 X108.303 Y97.446 E0.00269 ; perimeter
G1 X108.612 Y97.749 E0.02003 ; perimeter
G1 X109.039 Y98.108 E0.02585 ; perimeter
G1 X109.116 Y98.332 E0.01097 ; perimeter
G1 X109.111 Y98.510 E0.00824 ; perimeter
G1 X109.043 Y98.591 E0.00491 ; perimeter
G1 X109.028 Y98.750 E0.00740 ; perimeter
G1 X108.918 Y98.894 E0.00839 ; perimeter
G1 X108.902 Y98.972 E0.00368 ; perimeter
G1 X108.842 Y99.044 E0.00436 ; perimeter
G1 X108.652 Y99.103 E0.00920 ; perimeter
G1 X108.524 Y99.069 E0.00614 ; perimeter
G1 X108.438 Y98.883 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.332 Y98.972 E-0.05660 ; wipe and retract
G1 X107.693 Y98.444 E-0.21894 ; wipe and retract
G1 X107.080 Y97.766 E-0.24112 ; wipe and retract
G1 X106.942 Y97.466 E-0.08702 ; wipe and retract
G1 X106.887 Y96.949 E-0.13721 ; wipe and retract
G1 X106.836 Y96.679 E-0.07254 ; wipe and retract
G1 X106.844 Y96.515 E-0.04343 ; wipe and retract
;WIPE_END
G1 E-1.54314 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X101.337 Y94.686 ; move to first perimeter point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.964 Y94.576 E0.02950 ; perimeter
G1 X102.158 Y94.580 E0.00896 ; perimeter
G1 X102.433 Y94.605 E0.01281 ; perimeter
G1 X102.871 Y94.764 E0.02158 ; perimeter
G1 X103.029 Y94.782 E0.00738 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.237 Y94.882 E0.00963 ; perimeter (bridge)
G1 X103.409 Y94.856 E0.00730 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.659 Y94.818 E0.01172 ; perimeter
G1 X103.951 Y94.841 E0.01353 ; perimeter
G1 X104.118 Y94.827 E0.00780 ; perimeter
G1 X104.449 Y94.904 E0.01572 ; perimeter
G1 X105.326 Y95.314 E0.04484 ; perimeter
G1 X105.558 Y95.391 E0.01133 ; perimeter
G1 X105.723 Y95.471 E0.00850 ; perimeter
G1 X106.227 Y95.843 E0.02898 ; perimeter
G1 X106.324 Y95.981 E0.00786 ; perimeter
G1 X106.477 Y96.140 E0.01018 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.511 Y96.219 E0.00361 ; perimeter (bridge)
G1 X106.572 Y96.291 E0.00393 ; perimeter (bridge)
G1 X106.315 Y96.263 E0.01080 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.086 Y96.203 E0.01095 ; perimeter
G1 X105.945 Y96.219 E0.00657 ; perimeter
G1 X105.693 Y96.205 E0.01168 ; perimeter
G1 X105.367 Y96.113 E0.01569 ; perimeter
G1 X105.168 Y96.103 E0.00924 ; perimeter
G1 X104.925 Y96.011 E0.01204 ; perimeter
G1 X104.702 Y96.009 E0.01036 ; perimeter
G1 X104.363 Y95.858 E0.01715 ; perimeter
G1 X103.913 Y95.499 E0.02670 ; perimeter
G1 X103.903 Y95.462 E0.00178 ; perimeter
G1 X103.699 Y95.278 E0.01272 ; perimeter
G1 X103.634 Y95.034 E0.01169 ; perimeter
G1 X103.370 Y94.976 E0.01252 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.328 Y94.967 E0.00178 ; perimeter (bridge)
G1 X103.168 Y94.856 E0.00816 ; perimeter (bridge)
G1 X103.037 Y94.943 E0.00658 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.773 Y95.118 E0.01466 ; perimeter
G1 X102.666 Y95.139 E0.00504 ; perimeter
G1 X102.515 Y95.320 E0.01093 ; perimeter
G1 X102.331 Y95.378 E0.00891 ; perimeter
G1 X102.175 Y95.466 E0.00830 ; perimeter
G1 X101.938 Y95.504 E0.01115 ; perimeter
G1 X101.652 Y95.421 E0.01382 ; perimeter
G1 X101.372 Y95.289 E0.01431 ; perimeter
G1 X101.214 Y95.113 E0.01095 ; perimeter
G1 X101.205 Y94.862 E0.01164 ; perimeter
G1 X101.249 Y94.749 E0.00561 ; perimeter
G1 X101.288 Y94.721 E0.00223 ; perimeter
G1 X101.662 Y94.920 F10800.000 ; move inwards before travel
G1 X101.578 Y95.119 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.47893
G1 F2400.000
G1 X101.998 Y95.036 E0.01550 ; infill
G1 X102.480 Y94.986 E0.01759 ; infill
G1 X102.519 Y94.940 F10800.000 ; move to first infill point
;WIDTH:0.399796
G1 F2400.000
G1 X101.583 Y95.122 E0.02829 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.519 Y94.940 E-0.25155 ; wipe and retract
;WIPE_END
G1 E-2.14845 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 X104.972 Y95.601 ; move to first infill point
G1 Z12.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.357271
G1 F2400.000
G1 X105.251 Y95.709 E0.00782 ; infill
G1 X105.413 Y95.739 E0.00431 ; infill
;WIDTH:0.244874
G1 X105.929 Y95.976 E0.00953 ; infill
;LAYER_CHANGE
;Z:12.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;12.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.413 Y95.739 E-0.14980 ; wipe and retract
;WIPE_END
G1 E-2.25020 F2400.000 ; retract
G1 Z12.675 F10800.000 ; lift Z
G1 Z12.800 ; move to next layer (63)
;AFTER_LAYER_CHANGE
;12.8
G1 Z12.875 ; lift Z
G1 X110.008 Y100.755 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.155 Y100.645 E0.00849 ; perimeter
G1 X110.445 Y100.640 E0.01344 ; perimeter
G1 X110.567 Y100.716 E0.00665 ; perimeter
G1 X110.741 Y100.910 E0.01210 ; perimeter
G1 X110.808 Y101.115 E0.00998 ; perimeter
G1 X110.906 Y101.234 E0.00713 ; perimeter
G1 X110.948 Y101.329 E0.00479 ; perimeter
G1 X110.926 Y101.464 E0.00635 ; perimeter
G1 X110.992 Y101.609 E0.00737 ; perimeter
G1 X110.855 Y101.539 E0.00710 ; perimeter
G1 X110.642 Y101.648 E0.01109 ; perimeter
G1 X110.173 Y101.530 E0.02240 ; perimeter
G1 X110.037 Y101.458 E0.00710 ; perimeter
G1 X109.910 Y101.313 E0.00895 ; perimeter
G1 X109.857 Y101.141 E0.00834 ; perimeter
G1 X109.894 Y100.889 E0.01181 ; perimeter
G1 X109.969 Y100.801 E0.00535 ; perimeter
G1 X110.187 Y100.795 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.155 Y100.645 E-0.06392 ; wipe and retract
G1 X110.445 Y100.640 E-0.07655 ; wipe and retract
G1 X110.567 Y100.716 E-0.03786 ; wipe and retract
G1 X110.741 Y100.910 E-0.06895 ; wipe and retract
G1 X110.808 Y101.115 E-0.05685 ; wipe and retract
G1 X110.906 Y101.234 E-0.04065 ; wipe and retract
G1 X110.948 Y101.329 E-0.02731 ; wipe and retract
G1 X110.926 Y101.464 E-0.03619 ; wipe and retract
G1 X110.992 Y101.609 E-0.04199 ; wipe and retract
G1 X110.855 Y101.539 E-0.04042 ; wipe and retract
G1 X110.642 Y101.648 E-0.06318 ; wipe and retract
G1 X110.173 Y101.530 E-0.12762 ; wipe and retract
G1 X110.037 Y101.458 E-0.04045 ; wipe and retract
G1 X109.910 Y101.313 E-0.05101 ; wipe and retract
G1 X109.857 Y101.141 E-0.04750 ; wipe and retract
G1 X109.894 Y100.889 E-0.06728 ; wipe and retract
G1 X109.969 Y100.801 E-0.03046 ; wipe and retract
;WIPE_END
G1 E-1.48181 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X112.874 Y102.811 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.089 Y102.713 E0.01092 ; perimeter
G1 X113.379 Y102.671 E0.01356 ; perimeter
G1 X113.548 Y102.587 E0.00876 ; perimeter
G1 X113.730 Y102.570 E0.00847 ; perimeter
G1 X114.052 Y102.592 E0.01493 ; perimeter
G1 X114.304 Y102.701 E0.01274 ; perimeter
G1 X114.430 Y102.785 E0.00700 ; perimeter
G1 X114.492 Y102.953 E0.00832 ; perimeter
G1 X114.484 Y103.154 E0.00932 ; perimeter
G1 X114.411 Y103.307 E0.00786 ; perimeter
G1 X114.246 Y103.406 E0.00889 ; perimeter
G1 X114.137 Y103.438 E0.00529 ; perimeter
G1 X113.793 Y103.482 E0.01604 ; perimeter
G1 X113.189 Y103.413 E0.02818 ; perimeter
G1 X112.898 Y103.317 E0.01419 ; perimeter
G1 X112.667 Y103.163 E0.01286 ; perimeter
G1 X112.406 Y103.170 E0.01209 ; perimeter
G1 X112.151 Y103.133 E0.01192 ; perimeter
G1 X111.961 Y103.066 E0.00930 ; perimeter
G1 X111.771 Y102.940 E0.01060 ; perimeter
G1 X111.623 Y102.757 E0.01087 ; perimeter
G1 X111.606 Y102.675 E0.00389 ; perimeter
G1 X111.502 Y102.478 E0.01034 ; perimeter
G1 X111.443 Y102.265 E0.01022 ; perimeter
G1 X111.467 Y102.048 E0.01013 ; perimeter
G1 X111.510 Y102.085 E0.00264 ; perimeter
G1 X111.663 Y101.995 E0.00818 ; perimeter
G1 X111.792 Y102.018 E0.00608 ; perimeter
G1 X112.110 Y102.155 E0.01603 ; perimeter
G1 X112.212 Y102.181 E0.00490 ; perimeter
G1 X112.374 Y102.323 E0.00995 ; perimeter
G1 X112.594 Y102.644 E0.01804 ; perimeter
G1 X112.750 Y102.693 E0.00758 ; perimeter
G1 X112.831 Y102.769 E0.00516 ; perimeter
G1 X113.013 Y103.001 F10800.000 ; move inwards before travel
G1 X113.007 Y103.015 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.463907
G1 F2400.000
G1 X114.252 Y103.014 E0.04357 ; infill
G1 X114.244 Y102.978 F10800.000 ; move to first infill point
;WIDTH:0.362648
G1 F2400.000
G1 X113.473 Y103.052 E0.02061 ; infill
;WIDTH:0.342062
G1 X113.210 Y103.056 E0.00654 ; infill
;WIDTH:0.315766
G1 X112.947 Y103.060 E0.00596 ; infill
G1 X111.839 Y102.612 F10800.000 ; move to first infill point
;WIDTH:0.124273
G1 F2400.000
G1 X112.423 Y102.886 E0.00436 ; infill
G1 X112.539 Y102.903 E0.00080 ; infill
G1 X112.365 Y102.921 F10800.000 ; move to first infill point
;WIDTH:0.413363
G1 F2400.000
G1 X112.016 Y102.572 E0.01520 ; infill
;WIDTH:0.405823
G1 X112.007 Y102.558 E0.00051 ; infill
;WIDTH:0.392201
G1 X111.991 Y102.543 E0.00064 ; infill
;WIDTH:0.369938
G1 X111.971 Y102.524 E0.00075 ; infill
;WIDTH:0.347234
G1 X111.700 Y102.271 E0.00938 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.971 Y102.524 E-0.09787 ; wipe and retract
;WIPE_END
G1 E-2.30213 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X115.216 Y105.250 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.277 Y105.195 E0.00380 ; perimeter
G1 X115.399 Y105.141 E0.00618 ; perimeter
G1 X115.647 Y105.151 E0.01153 ; perimeter
G1 X115.756 Y105.205 E0.00564 ; perimeter
G1 X115.809 Y105.258 E0.00349 ; perimeter
G1 X115.878 Y105.393 E0.00698 ; perimeter
G1 X115.892 Y105.499 E0.00499 ; perimeter
G1 X115.878 Y105.680 E0.00840 ; perimeter
G1 X115.809 Y105.813 E0.00692 ; perimeter
G1 X115.701 Y105.895 E0.00629 ; perimeter
G1 X115.526 Y105.948 E0.00849 ; perimeter
G1 X115.420 Y105.938 E0.00492 ; perimeter
G1 X115.253 Y105.848 E0.00879 ; perimeter
G1 X115.147 Y105.655 E0.01021 ; perimeter
G1 X115.137 Y105.506 E0.00692 ; perimeter
G1 X115.187 Y105.302 E0.00970 ; perimeter
G1 X115.297 Y105.258 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.277 Y105.195 E-0.03697 ; wipe and retract
G1 X115.399 Y105.141 E-0.03519 ; wipe and retract
G1 X115.647 Y105.151 E-0.06567 ; wipe and retract
G1 X115.756 Y105.205 E-0.03212 ; wipe and retract
G1 X115.809 Y105.258 E-0.01986 ; wipe and retract
G1 X115.878 Y105.393 E-0.03978 ; wipe and retract
G1 X115.892 Y105.499 E-0.02842 ; wipe and retract
G1 X115.878 Y105.680 E-0.04786 ; wipe and retract
G1 X115.809 Y105.813 E-0.03942 ; wipe and retract
G1 X115.701 Y105.895 E-0.03586 ; wipe and retract
G1 X115.526 Y105.948 E-0.04838 ; wipe and retract
G1 X115.420 Y105.938 E-0.02803 ; wipe and retract
G1 X115.253 Y105.848 E-0.05007 ; wipe and retract
G1 X115.147 Y105.655 E-0.05816 ; wipe and retract
G1 X115.137 Y105.506 E-0.03941 ; wipe and retract
G1 X115.187 Y105.302 E-0.05524 ; wipe and retract
;WIPE_END
G1 E-1.73956 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X115.289 Y111.494 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.404 Y111.436 E0.00597 ; perimeter
G1 X115.511 Y111.421 E0.00498 ; perimeter
G1 X115.701 Y111.474 E0.00914 ; perimeter
G1 X115.817 Y111.595 E0.00779 ; perimeter
G1 X115.873 Y111.771 E0.00851 ; perimeter
G1 X115.845 Y112.070 E0.01393 ; perimeter
G1 X115.779 Y112.196 E0.00658 ; perimeter
G1 X115.642 Y112.280 E0.00743 ; perimeter
G1 X115.452 Y112.297 E0.00883 ; perimeter
G1 X115.254 Y112.203 E0.01018 ; perimeter
G1 X115.163 Y111.926 E0.01349 ; perimeter
G1 X115.187 Y111.679 E0.01147 ; perimeter
G1 X115.251 Y111.540 E0.00709 ; perimeter
G1 X115.412 Y111.533 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.404 Y111.436 E-0.04893 ; wipe and retract
G1 X115.511 Y111.421 E-0.02840 ; wipe and retract
G1 X115.701 Y111.474 E-0.05207 ; wipe and retract
G1 X115.817 Y111.595 E-0.04439 ; wipe and retract
G1 X115.873 Y111.771 E-0.04851 ; wipe and retract
G1 X115.845 Y112.070 E-0.07937 ; wipe and retract
G1 X115.779 Y112.196 E-0.03750 ; wipe and retract
G1 X115.642 Y112.280 E-0.04234 ; wipe and retract
G1 X115.452 Y112.297 E-0.05033 ; wipe and retract
G1 X115.254 Y112.203 E-0.05802 ; wipe and retract
G1 X115.163 Y111.926 E-0.07685 ; wipe and retract
G1 X115.187 Y111.679 E-0.06534 ; wipe and retract
G1 X115.251 Y111.540 E-0.04040 ; wipe and retract
;WIPE_END
G1 E-1.72755 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X115.431 Y114.637 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.552 Y114.692 E0.00613 ; perimeter
G1 X115.620 Y114.753 E0.00423 ; perimeter
G1 X115.706 Y114.912 E0.00836 ; perimeter
G1 X115.731 Y115.016 E0.00496 ; perimeter
G1 X115.673 Y115.224 E0.00999 ; perimeter
G1 X115.595 Y115.332 E0.00620 ; perimeter
G1 X115.102 Y115.784 E0.03098 ; perimeter
G1 X114.875 Y115.947 E0.01292 ; perimeter
G1 X114.733 Y115.997 E0.00699 ; perimeter
G1 X114.559 Y115.982 E0.00811 ; perimeter
G1 X114.426 Y115.888 E0.00752 ; perimeter
G1 X114.286 Y115.657 E0.01253 ; perimeter
G1 X114.273 Y115.580 E0.00361 ; perimeter
G1 X114.312 Y115.411 E0.00804 ; perimeter
G1 X114.488 Y115.200 E0.01271 ; perimeter
G1 X115.062 Y114.710 E0.03497 ; perimeter
G1 X115.145 Y114.669 E0.00426 ; perimeter
G1 X115.371 Y114.633 E0.01064 ; perimeter
G1 X115.471 Y114.764 F10800.000 ; move inwards before travel
G1 X115.439 Y114.926 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.362775
G1 F2400.000
G1 X114.787 Y115.495 E0.02303 ; infill
G1 X114.703 Y115.589 E0.00335 ; infill
;WIDTH:0.344241
G1 X114.699 Y115.608 E0.00048 ; infill
;WIDTH:0.31799
G1 X114.693 Y115.624 E0.00039 ; infill
;WIDTH:0.291592
G1 X114.687 Y115.640 E0.00035 ; infill
;WIDTH:0.265196
G1 X114.628 Y115.736 E0.00209 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.687 Y115.640 E-0.02984 ; wipe and retract
;WIPE_END
G1 E-2.37016 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X111.944 Y115.463 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.028 Y115.549 E0.00556 ; perimeter
G1 X112.081 Y115.687 E0.00687 ; perimeter
G1 X112.058 Y115.915 E0.01057 ; perimeter
G1 X112.005 Y116.011 E0.00509 ; perimeter
G1 X111.888 Y116.098 E0.00674 ; perimeter
G1 X111.779 Y116.129 E0.00526 ; perimeter
G1 X111.572 Y116.133 E0.00957 ; perimeter
G1 X111.418 Y116.074 E0.00767 ; perimeter
G1 X111.321 Y115.949 E0.00732 ; perimeter
G1 X111.286 Y115.659 E0.01353 ; perimeter
G1 X111.324 Y115.544 E0.00560 ; perimeter
G1 X111.370 Y115.490 E0.00330 ; perimeter
G1 X111.590 Y115.399 E0.01103 ; perimeter
G1 X111.819 Y115.413 E0.01065 ; perimeter
G1 X111.888 Y115.441 E0.00343 ; perimeter
G1 X111.936 Y115.583 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.028 Y115.549 E-0.04666 ; wipe and retract
G1 X112.081 Y115.687 E-0.03911 ; wipe and retract
G1 X112.058 Y115.915 E-0.06024 ; wipe and retract
G1 X112.005 Y116.011 E-0.02900 ; wipe and retract
G1 X111.888 Y116.098 E-0.03839 ; wipe and retract
G1 X111.779 Y116.129 E-0.02997 ; wipe and retract
G1 X111.572 Y116.133 E-0.05454 ; wipe and retract
G1 X111.418 Y116.074 E-0.04369 ; wipe and retract
G1 X111.321 Y115.949 E-0.04169 ; wipe and retract
G1 X111.286 Y115.659 E-0.07709 ; wipe and retract
G1 X111.324 Y115.544 E-0.03192 ; wipe and retract
G1 X111.370 Y115.490 E-0.01878 ; wipe and retract
G1 X111.590 Y115.399 E-0.06282 ; wipe and retract
G1 X111.819 Y115.413 E-0.06068 ; wipe and retract
G1 X111.888 Y115.441 E-0.01955 ; wipe and retract
;WIPE_END
G1 E-1.74588 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X108.781 Y112.964 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.748 Y113.050 E0.00425 ; perimeter
G1 X108.689 Y113.104 E0.00372 ; perimeter
G1 X108.599 Y113.135 E0.00442 ; perimeter
G1 X108.451 Y113.137 E0.00684 ; perimeter
G1 X108.346 Y113.104 E0.00511 ; perimeter
G1 X108.162 Y113.010 E0.00958 ; perimeter
G1 X107.970 Y112.839 E0.01192 ; perimeter
G1 X107.726 Y112.421 E0.02243 ; perimeter
G1 X107.696 Y112.268 E0.00719 ; perimeter
G1 X107.706 Y112.106 E0.00756 ; perimeter
G1 X107.762 Y111.994 E0.00576 ; perimeter
G1 X107.935 Y111.935 E0.00850 ; perimeter
G1 X108.037 Y111.948 E0.00473 ; perimeter
G1 X108.226 Y112.020 E0.00937 ; perimeter
G1 X108.472 Y112.213 E0.01449 ; perimeter
G1 X108.722 Y112.578 E0.02049 ; perimeter
G1 X108.784 Y112.791 E0.01026 ; perimeter
G1 X108.782 Y112.904 E0.00526 ; perimeter
G1 X108.694 Y112.994 F10800.000 ; move inwards before travel
G1 X108.541 Y112.859 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288939
G1 F2400.000
G1 X108.369 Y112.708 E0.00469 ; infill
G1 X108.126 Y112.395 E0.00810 ; infill
;WIDTH:0.273478
G1 X108.058 Y112.317 E0.00199 ; infill
;WIDTH:0.235959
G1 X107.940 Y112.219 E0.00246 ; infill
G1 X107.950 Y112.180 F10800.000 ; move to first infill point
;WIDTH:0.127963
G1 F2400.000
G1 X108.166 Y112.516 E0.00283 ; infill
;WIDTH:0.153255
G1 X108.383 Y112.853 E0.00367 ; infill
G1 X108.528 Y112.895 F10800.000 ; move to first infill point
;WIDTH:0.163004
G1 F2400.000
G1 X107.945 Y112.288 E0.00840 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.528 Y112.895 E-0.22199 ; wipe and retract
;WIPE_END
G1 E-2.17801 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X106.875 Y108.693 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.644 Y108.687 E0.01072 ; perimeter
G1 X106.511 Y108.625 E0.00679 ; perimeter
G1 X106.229 Y108.167 E0.02496 ; perimeter
G1 X106.161 Y107.839 E0.01549 ; perimeter
G1 X106.177 Y107.747 E0.00434 ; perimeter
G1 X106.260 Y107.705 E0.00427 ; perimeter
G1 X106.542 Y107.661 E0.01325 ; perimeter
G1 X106.758 Y107.714 E0.01027 ; perimeter
G1 X107.023 Y107.856 E0.01393 ; perimeter
G1 X107.110 Y107.963 E0.00640 ; perimeter
G1 X107.196 Y108.178 E0.01074 ; perimeter
G1 X107.196 Y108.343 E0.00765 ; perimeter
G1 X107.131 Y108.471 E0.00665 ; perimeter
G1 X106.921 Y108.654 E0.01292 ; perimeter
G1 X106.712 Y108.529 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.644 Y108.687 E-0.07355 ; wipe and retract
G1 X106.511 Y108.625 E-0.03866 ; wipe and retract
G1 X106.229 Y108.167 E-0.14218 ; wipe and retract
G1 X106.161 Y107.839 E-0.08825 ; wipe and retract
G1 X106.177 Y107.747 E-0.02473 ; wipe and retract
G1 X106.260 Y107.705 E-0.02434 ; wipe and retract
G1 X106.542 Y107.661 E-0.07547 ; wipe and retract
G1 X106.758 Y107.714 E-0.05851 ; wipe and retract
G1 X107.023 Y107.856 E-0.07936 ; wipe and retract
G1 X107.110 Y107.963 E-0.03644 ; wipe and retract
G1 X107.196 Y108.178 E-0.06116 ; wipe and retract
G1 X107.196 Y108.343 E-0.04356 ; wipe and retract
G1 X107.131 Y108.471 E-0.03791 ; wipe and retract
G1 X106.921 Y108.654 E-0.07358 ; wipe and retract
;WIPE_END
G1 E-1.54230 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X105.350 Y107.009 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.071 Y107.066 E0.01322 ; perimeter
G1 X105.024 Y107.091 E0.00245 ; perimeter
G1 X104.686 Y107.047 E0.01580 ; perimeter
G1 X103.992 Y106.752 E0.03493 ; perimeter
G1 X103.924 Y106.686 E0.00437 ; perimeter
G1 X103.600 Y106.567 E0.01598 ; perimeter
G1 X103.377 Y106.413 E0.01255 ; perimeter
G1 X103.214 Y106.226 E0.01148 ; perimeter
G1 X103.192 Y106.169 E0.00284 ; perimeter
G1 X103.238 Y106.099 E0.00387 ; perimeter
G1 X103.536 Y106.066 E0.01392 ; perimeter
G1 X103.769 Y105.976 E0.01154 ; perimeter
G1 X104.174 Y105.966 E0.01876 ; perimeter
G1 X104.559 Y106.038 E0.01816 ; perimeter
G1 X104.721 Y106.117 E0.00836 ; perimeter
G1 X105.006 Y106.304 E0.01577 ; perimeter
G1 X105.174 Y106.453 E0.01039 ; perimeter
G1 X105.215 Y106.582 E0.00628 ; perimeter
G1 X105.333 Y106.766 E0.01011 ; perimeter
G1 X105.305 Y106.940 E0.00819 ; perimeter
G1 X105.318 Y106.959 E0.00104 ; perimeter
G1 X105.084 Y106.907 F10800.000 ; move inwards before travel
G1 X105.028 Y106.828 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.274072
G1 F2400.000
G1 X104.837 Y106.674 E0.00472 ; infill
;WIDTH:0.367262
G1 X104.420 Y106.458 E0.01265 ; infill
G1 X103.730 Y106.249 E0.01944 ; infill
G1 X102.270 Y105.315 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.146 Y105.296 E0.00581 ; perimeter
G1 X101.874 Y105.053 E0.01692 ; perimeter
G1 X101.672 Y104.968 E0.01013 ; perimeter
G1 X101.278 Y104.544 E0.02682 ; perimeter
G1 X100.609 Y103.489 E0.05785 ; perimeter
G1 X100.490 Y103.231 E0.01319 ; perimeter
G1 X100.404 Y102.900 E0.01583 ; perimeter
G1 X100.416 Y102.598 E0.01399 ; perimeter
G1 X100.458 Y102.494 E0.00518 ; perimeter
G1 X100.512 Y102.457 E0.00307 ; perimeter
G1 X100.666 Y102.454 E0.00713 ; perimeter
G1 X100.896 Y102.572 E0.01199 ; perimeter
G1 X101.062 Y102.729 E0.01056 ; perimeter
G1 X101.259 Y103.014 E0.01605 ; perimeter
G1 X101.550 Y103.576 E0.02930 ; perimeter
G1 X101.652 Y103.702 E0.00751 ; perimeter
G1 X101.797 Y103.960 E0.01372 ; perimeter
G1 X101.988 Y104.223 E0.01505 ; perimeter
G1 X102.171 Y104.652 E0.02161 ; perimeter
G1 X102.220 Y104.842 E0.00907 ; perimeter
G1 X102.281 Y105.256 E0.01938 ; perimeter
G1 X102.165 Y105.247 F10800.000 ; move inwards before travel
G1 X101.964 Y104.815 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.176883
G1 F2400.000
G1 X101.867 Y104.724 E0.00149 ; infill
G1 X101.729 Y104.513 E0.00280 ; infill
;WIDTH:0.307086
G1 X101.229 Y103.770 E0.01968 ; infill
G1 X100.851 Y103.098 E0.01695 ; infill
G1 X100.679 Y102.731 E0.00889 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.851 Y103.098 E-0.10681 ; wipe and retract
G1 X101.229 Y103.770 E-0.20363 ; wipe and retract
G1 X101.729 Y104.513 E-0.23646 ; wipe and retract
;WIPE_END
G1 E-1.85311 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X99.053 Y99.250 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.929 Y99.267 E0.00581 ; perimeter
G1 X98.770 Y99.223 E0.00764 ; perimeter
G1 X98.676 Y99.142 E0.00575 ; perimeter
G1 X98.627 Y99.055 E0.00461 ; perimeter
G1 X98.568 Y98.832 E0.01069 ; perimeter
G1 X98.555 Y98.524 E0.01428 ; perimeter
G1 X98.597 Y98.414 E0.00545 ; perimeter
G1 X98.757 Y98.155 E0.01411 ; perimeter
G1 X98.804 Y98.109 E0.00308 ; perimeter
G1 X98.954 Y98.037 E0.00768 ; perimeter
G1 X99.083 Y98.075 E0.00627 ; perimeter
G1 X99.240 Y98.191 E0.00904 ; perimeter
G1 X99.354 Y98.414 E0.01160 ; perimeter
G1 X99.411 Y98.752 E0.01589 ; perimeter
G1 X99.284 Y99.055 E0.01519 ; perimeter
G1 X99.100 Y99.213 E0.01122 ; perimeter
G1 X98.952 Y99.175 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.929 Y99.267 E-0.04748 ; wipe and retract
G1 X98.770 Y99.223 E-0.04354 ; wipe and retract
G1 X98.676 Y99.142 E-0.03278 ; wipe and retract
G1 X98.627 Y99.055 E-0.02628 ; wipe and retract
G1 X98.568 Y98.832 E-0.06088 ; wipe and retract
G1 X98.555 Y98.524 E-0.08136 ; wipe and retract
G1 X98.597 Y98.414 E-0.03104 ; wipe and retract
G1 X98.757 Y98.155 E-0.08039 ; wipe and retract
G1 X98.804 Y98.109 E-0.01752 ; wipe and retract
G1 X98.954 Y98.037 E-0.04375 ; wipe and retract
G1 X99.083 Y98.075 E-0.03569 ; wipe and retract
G1 X99.240 Y98.191 E-0.05152 ; wipe and retract
G1 X99.354 Y98.414 E-0.06608 ; wipe and retract
G1 X99.411 Y98.752 E-0.09055 ; wipe and retract
G1 X99.284 Y99.055 E-0.08651 ; wipe and retract
G1 X99.100 Y99.213 E-0.06392 ; wipe and retract
;WIPE_END
G1 E-1.54071 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X99.095 Y96.164 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.986 Y96.071 E0.00664 ; perimeter
G1 X98.905 Y95.904 E0.00857 ; perimeter
G1 X98.877 Y95.742 E0.00762 ; perimeter
G1 X98.931 Y95.481 E0.01238 ; perimeter
G1 X98.976 Y95.392 E0.00460 ; perimeter
G1 X99.099 Y95.220 E0.00981 ; perimeter
G1 X99.224 Y95.164 E0.00633 ; perimeter
G1 X99.363 Y95.130 E0.00663 ; perimeter
G1 X99.508 Y95.130 E0.00674 ; perimeter
G1 X99.713 Y95.192 E0.00991 ; perimeter
G1 X99.778 Y95.312 E0.00632 ; perimeter
G1 X99.782 Y95.470 E0.00729 ; perimeter
G1 X99.812 Y95.537 E0.00344 ; perimeter
G1 X99.785 Y95.764 E0.01057 ; perimeter
G1 X99.604 Y96.034 E0.01505 ; perimeter
G1 X99.399 Y96.153 E0.01099 ; perimeter
G1 X99.155 Y96.161 E0.01131 ; perimeter
G1 X99.075 Y96.022 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.986 Y96.071 E-0.05066 ; wipe and retract
G1 X98.905 Y95.904 E-0.04885 ; wipe and retract
G1 X98.877 Y95.742 E-0.04339 ; wipe and retract
G1 X98.931 Y95.481 E-0.07051 ; wipe and retract
G1 X98.976 Y95.392 E-0.02621 ; wipe and retract
G1 X99.099 Y95.220 E-0.05590 ; wipe and retract
G1 X99.224 Y95.164 E-0.03608 ; wipe and retract
G1 X99.363 Y95.130 E-0.03778 ; wipe and retract
G1 X99.508 Y95.130 E-0.03837 ; wipe and retract
G1 X99.713 Y95.192 E-0.05648 ; wipe and retract
G1 X99.778 Y95.312 E-0.03601 ; wipe and retract
G1 X99.782 Y95.470 E-0.04151 ; wipe and retract
G1 X99.812 Y95.537 E-0.01960 ; wipe and retract
G1 X99.785 Y95.764 E-0.06019 ; wipe and retract
G1 X99.604 Y96.034 E-0.08572 ; wipe and retract
G1 X99.399 Y96.153 E-0.06263 ; wipe and retract
G1 X99.155 Y96.161 E-0.06445 ; wipe and retract
;WIPE_END
G1 E-1.56567 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X107.469 Y97.265 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.645 Y97.381 E0.00713 ; perimeter
G1 X107.957 Y97.474 E0.01104 ; perimeter
G1 X108.618 Y98.125 E0.03139 ; perimeter
G1 X108.749 Y98.232 E0.00573 ; perimeter
G1 X108.721 Y98.325 E0.00326 ; perimeter
G1 X108.568 Y98.450 E0.00670 ; perimeter
G1 X108.273 Y98.215 E0.01277 ; perimeter
G1 X107.674 Y97.488 E0.03190 ; perimeter
G1 X107.493 Y97.320 E0.00836 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.645 Y97.381 E-0.04323 ; wipe and retract
G1 X107.957 Y97.474 E-0.08606 ; wipe and retract
G1 X108.618 Y98.125 E-0.24470 ; wipe and retract
G1 X108.749 Y98.232 E-0.04464 ; wipe and retract
G1 X108.721 Y98.325 E-0.02541 ; wipe and retract
G1 X108.568 Y98.450 E-0.05220 ; wipe and retract
G1 X108.273 Y98.215 E-0.09955 ; wipe and retract
G1 X107.674 Y97.488 E-0.24866 ; wipe and retract
G1 X107.493 Y97.320 E-0.06518 ; wipe and retract
;WIPE_END
G1 E-1.49037 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X103.137 Y95.057 ; move to first perimeter point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.954 Y95.178 E0.01018 ; perimeter
G1 X102.748 Y95.219 E0.00970 ; perimeter
G1 X102.405 Y95.342 E0.01688 ; perimeter
G1 X102.289 Y95.352 E0.00541 ; perimeter
G1 X102.063 Y95.425 E0.01099 ; perimeter
G1 X101.842 Y95.427 E0.01024 ; perimeter
G1 X101.471 Y95.291 E0.01833 ; perimeter
G1 X101.171 Y95.241 E0.01409 ; perimeter
G1 X101.078 Y95.198 E0.00473 ; perimeter
G1 X100.913 Y95.048 E0.01035 ; perimeter
G1 X100.930 Y94.890 E0.00735 ; perimeter
G1 X101.022 Y94.784 E0.00648 ; perimeter
G1 X101.050 Y94.708 E0.00376 ; perimeter
G1 X101.308 Y94.611 E0.01275 ; perimeter
G1 X101.691 Y94.552 E0.01796 ; perimeter
G1 X102.235 Y94.520 E0.02523 ; perimeter
G1 X102.868 Y94.554 E0.02935 ; perimeter
G1 X103.068 Y94.614 E0.00970 ; perimeter
G1 X103.338 Y94.634 E0.01254 ; perimeter
G1 X103.543 Y94.680 E0.00975 ; perimeter
G1 X103.896 Y94.699 E0.01635 ; perimeter
G1 X104.392 Y94.874 E0.02438 ; perimeter
G1 X104.604 Y94.972 E0.01079 ; perimeter
G1 X104.728 Y95.057 E0.00699 ; perimeter
G1 X105.333 Y95.315 E0.03047 ; perimeter
G1 X105.802 Y95.469 E0.02286 ; perimeter
G1 X106.177 Y95.653 E0.01933 ; perimeter
G1 X107.076 Y96.350 E0.05268 ; perimeter
G1 X107.237 Y96.455 E0.00892 ; perimeter
G1 X107.542 Y96.735 E0.01916 ; perimeter
G1 X107.851 Y96.940 E0.01720 ; perimeter
G1 X108.181 Y97.038 E0.01595 ; perimeter
G1 X108.233 Y97.070 E0.00282 ; perimeter
G1 X108.941 Y97.766 E0.04599 ; perimeter
G1 X109.194 Y97.974 E0.01519 ; perimeter
G1 X109.294 Y98.228 E0.01264 ; perimeter
G1 X109.200 Y98.409 E0.00943 ; perimeter
G1 X109.196 Y98.506 E0.00450 ; perimeter
G1 X109.067 Y98.664 E0.00943 ; perimeter
G1 X108.788 Y98.903 E0.01702 ; perimeter
G1 X108.612 Y98.949 E0.00847 ; perimeter
G1 X108.489 Y98.941 E0.00571 ; perimeter
G1 X108.342 Y98.886 E0.00727 ; perimeter
G1 X107.933 Y98.560 E0.02418 ; perimeter
G1 X107.325 Y97.821 E0.04435 ; perimeter
G1 X107.093 Y97.612 E0.01444 ; perimeter
G1 X106.994 Y97.380 E0.01169 ; perimeter
G1 X106.919 Y97.267 E0.00630 ; perimeter
G1 X106.879 Y97.062 E0.00965 ; perimeter
G1 X106.723 Y96.831 E0.01295 ; perimeter
G1 X106.643 Y96.655 E0.00893 ; perimeter
G1 X106.232 Y96.410 E0.02217 ; perimeter
G1 X105.482 Y96.200 E0.03609 ; perimeter
G1 X104.923 Y95.968 E0.02803 ; perimeter
G1 X104.842 Y95.967 E0.00373 ; perimeter
G1 X104.531 Y95.804 E0.01629 ; perimeter
G1 X104.288 Y95.729 E0.01177 ; perimeter
G1 X104.153 Y95.632 E0.00768 ; perimeter
G1 X103.937 Y95.538 E0.01090 ; perimeter
G1 X103.633 Y95.292 E0.01815 ; perimeter
G1 X103.334 Y95.194 E0.01455 ; perimeter
G1 X103.186 Y95.091 E0.00836 ; perimeter
G1 X102.984 Y94.899 F10800.000 ; move inwards before travel
G1 X103.395 Y94.916 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.118705
G1 F2400.000
G1 X103.508 Y94.958 E0.00076 ; infill
;WIDTH:0.153787
G1 X103.640 Y94.982 E0.00124 ; infill
;WIDTH:0.188868
G1 X103.772 Y95.007 E0.00163 ; infill
;WIDTH:0.201386
G1 X103.800 Y95.015 E0.00037 ; infill
;WIDTH:0.212029
G1 X103.816 Y95.021 E0.00024 ; infill
;WIDTH:0.228732
G1 X103.871 Y95.055 E0.00101 ; infill
;WIDTH:0.265949
G1 X103.961 Y95.104 E0.00190 ; infill
;WIDTH:0.303165
G1 X104.051 Y95.153 E0.00222 ; infill
;WIDTH:0.320776
G1 X104.334 Y95.281 E0.00716 ; infill
G1 X104.527 Y95.393 E0.00517 ; infill
G1 X105.205 Y95.673 E0.01693 ; infill
;WIDTH:0.352425
G1 X105.818 Y95.900 E0.01683 ; infill
;WIDTH:0.24992
G1 X106.162 Y96.053 E0.00647 ; infill
;WIDTH:0.132015
G1 X106.350 Y96.149 E0.00157 ; infill
G1 X106.608 Y96.324 E0.00231 ; infill
G1 X106.854 Y96.533 F10800.000 ; move to first infill point
;WIDTH:0.212392
G1 F2400.000
G1 X107.037 Y96.713 E0.00361 ; infill
;WIDTH:0.242025
G1 X107.119 Y96.809 E0.00209 ; infill
;WIDTH:0.27166
G1 X107.201 Y96.905 E0.00240 ; infill
;WIDTH:0.292829
G1 X107.229 Y96.944 E0.00101 ; infill
;WIDTH:0.30914
G1 X107.308 Y97.085 E0.00358 ; infill
G1 X107.323 Y97.073 F10800.000 ; move to first infill point
;WIDTH:0.119138
G1 F2400.000
G1 X106.870 Y96.521 E0.00453 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.323 Y97.073 E-0.18848 ; wipe and retract
;WIPE_END
G1 E-2.21152 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 X102.889 Y94.932 ; move to first infill point
G1 Z12.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.39541
G1 F2400.000
G1 X102.233 Y94.938 E0.01923 ; infill
G1 X101.991 Y94.980 E0.00719 ; infill
G1 X101.236 Y95.006 E0.02214 ; infill
;LAYER_CHANGE
;Z:13
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;13
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.991 Y94.980 E-0.19935 ; wipe and retract
G1 X102.233 Y94.938 E-0.06478 ; wipe and retract
G1 X102.889 Y94.932 E-0.17312 ; wipe and retract
;WIPE_END
G1 E-1.96275 F2400.000 ; retract
G1 Z12.875 F10800.000 ; lift Z
G1 Z13.000 ; move to next layer (64)
;AFTER_LAYER_CHANGE
;13
G1 Z13.075 ; lift Z
G1 X110.197 Y100.583 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.258 Y100.490 E0.00514 ; perimeter
G1 X110.527 Y100.542 E0.01271 ; perimeter
G1 X110.648 Y100.629 E0.00690 ; perimeter
G1 X110.831 Y100.902 E0.01524 ; perimeter
G1 X110.860 Y100.990 E0.00430 ; perimeter
G1 X111.359 Y101.564 E0.03522 ; perimeter
G1 X111.782 Y101.887 E0.02464 ; perimeter
G1 X112.230 Y102.081 E0.02259 ; perimeter
G1 X112.439 Y102.218 E0.01160 ; perimeter
G1 X112.484 Y102.396 E0.00851 ; perimeter
G1 X112.526 Y102.465 E0.00373 ; perimeter
G1 X112.534 Y102.618 E0.00709 ; perimeter
G1 X112.827 Y102.969 E0.02119 ; perimeter
G1 X112.262 Y103.003 E0.02623 ; perimeter
G1 X111.865 Y102.939 E0.01864 ; perimeter
G1 X111.698 Y102.834 E0.00912 ; perimeter
G1 X111.505 Y102.618 E0.01342 ; perimeter
G1 X111.361 Y102.351 E0.01406 ; perimeter
G1 X111.304 Y102.282 E0.00415 ; perimeter
G1 X111.230 Y102.066 E0.01056 ; perimeter
G1 X110.977 Y101.840 E0.01572 ; perimeter
G1 X110.723 Y101.702 E0.01340 ; perimeter
G1 X110.337 Y101.575 E0.01880 ; perimeter
G1 X110.089 Y101.433 E0.01324 ; perimeter
G1 X109.949 Y101.268 E0.01002 ; perimeter
G1 X109.906 Y101.116 E0.00733 ; perimeter
G1 X109.943 Y100.863 E0.01185 ; perimeter
G1 X110.032 Y100.688 E0.00909 ; perimeter
G1 X110.146 Y100.615 E0.00627 ; perimeter
G1 X110.307 Y100.595 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.258 Y100.490 E-0.04422 ; wipe and retract
G1 X110.527 Y100.542 E-0.07239 ; wipe and retract
G1 X110.648 Y100.629 E-0.03932 ; wipe and retract
G1 X110.831 Y100.902 E-0.08680 ; wipe and retract
G1 X110.860 Y100.990 E-0.02450 ; wipe and retract
G1 X111.359 Y101.564 E-0.20066 ; wipe and retract
G1 X111.782 Y101.887 E-0.14037 ; wipe and retract
G1 X112.230 Y102.081 E-0.12867 ; wipe and retract
G1 X112.439 Y102.218 E-0.06608 ; wipe and retract
G1 X112.484 Y102.396 E-0.04847 ; wipe and retract
G1 X112.526 Y102.465 E-0.02125 ; wipe and retract
G1 X112.534 Y102.618 E-0.04039 ; wipe and retract
G1 X112.827 Y102.969 E-0.12074 ; wipe and retract
G1 X112.262 Y103.003 E-0.14944 ; wipe and retract
G1 X111.865 Y102.939 E-0.10617 ; wipe and retract
G1 X111.698 Y102.834 E-0.05198 ; wipe and retract
G1 X111.505 Y102.618 E-0.07645 ; wipe and retract
G1 X111.361 Y102.351 E-0.08007 ; wipe and retract
G1 X111.304 Y102.282 E-0.02365 ; wipe and retract
G1 X111.230 Y102.066 E-0.06018 ; wipe and retract
G1 X110.977 Y101.840 E-0.08955 ; wipe and retract
G1 X110.723 Y101.702 E-0.07631 ; wipe and retract
G1 X110.337 Y101.575 E-0.10712 ; wipe and retract
G1 X110.089 Y101.433 E-0.07543 ; wipe and retract
G1 X109.949 Y101.268 E-0.05707 ; wipe and retract
G1 X109.906 Y101.116 E-0.04175 ; wipe and retract
G1 X109.943 Y100.863 E-0.06753 ; wipe and retract
G1 X110.032 Y100.688 E-0.05181 ; wipe and retract
G1 X110.146 Y100.615 E-0.03570 ; wipe and retract
;WIPE_END
G1 E-0.21593 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X112.857 Y102.982 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.338 Y102.715 E0.02549 ; perimeter
G1 X113.419 Y102.612 E0.00605 ; perimeter
G1 X113.650 Y102.518 E0.01157 ; perimeter
G1 X113.993 Y102.511 E0.01587 ; perimeter
G1 X114.224 Y102.636 E0.01218 ; perimeter
G1 X114.292 Y102.724 E0.00516 ; perimeter
G1 X114.372 Y102.784 E0.00462 ; perimeter
G1 X114.418 Y102.899 E0.00574 ; perimeter
G1 X114.422 Y103.100 E0.00932 ; perimeter
G1 X114.349 Y103.290 E0.00942 ; perimeter
G1 X114.228 Y103.380 E0.00697 ; perimeter
G1 X114.031 Y103.438 E0.00953 ; perimeter
G1 X113.444 Y103.380 E0.02732 ; perimeter
G1 X113.293 Y103.321 E0.00750 ; perimeter
G1 X112.905 Y103.019 E0.02278 ; perimeter
G1 X113.253 Y102.927 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.338 Y102.715 E-0.13977 ; wipe and retract
G1 X113.419 Y102.612 E-0.03444 ; wipe and retract
G1 X113.650 Y102.518 E-0.06588 ; wipe and retract
G1 X113.993 Y102.511 E-0.09040 ; wipe and retract
G1 X114.224 Y102.636 E-0.06941 ; wipe and retract
G1 X114.292 Y102.724 E-0.02942 ; wipe and retract
G1 X114.372 Y102.784 E-0.02630 ; wipe and retract
G1 X114.418 Y102.899 E-0.03271 ; wipe and retract
G1 X114.422 Y103.100 E-0.05309 ; wipe and retract
G1 X114.349 Y103.290 E-0.05365 ; wipe and retract
G1 X114.228 Y103.380 E-0.03973 ; wipe and retract
G1 X114.031 Y103.438 E-0.05432 ; wipe and retract
G1 X113.444 Y103.380 E-0.15565 ; wipe and retract
G1 X113.293 Y103.321 E-0.04275 ; wipe and retract
G1 X112.905 Y103.019 E-0.12978 ; wipe and retract
;WIPE_END
G1 E-1.38268 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X111.002 Y101.554 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.127592
G1 F2400.000
G1 X110.183 Y100.945 E0.00719 ; infill
G1 X110.321 Y100.790 F10800.000 ; move to first infill point
;WIDTH:0.47534
G1 F2400.000
G1 X110.377 Y101.064 E0.01006 ; infill
G1 X110.408 Y101.097 E0.00164 ; infill
;WIDTH:0.37716
G1 X110.504 Y101.200 E0.00392 ; infill
G1 X110.999 Y101.558 E0.01697 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.504 Y101.200 E-0.16114 ; wipe and retract
G1 X110.408 Y101.097 E-0.03720 ; wipe and retract
;WIPE_END
G1 E-2.20167 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X115.267 Y105.181 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.399 Y105.120 E0.00677 ; perimeter
G1 X115.645 Y105.129 E0.01139 ; perimeter
G1 X115.765 Y105.192 E0.00625 ; perimeter
G1 X115.825 Y105.253 E0.00398 ; perimeter
G1 X115.887 Y105.413 E0.00797 ; perimeter
G1 X115.893 Y105.486 E0.00337 ; perimeter
G1 X115.878 Y105.653 E0.00777 ; perimeter
G1 X115.808 Y105.787 E0.00700 ; perimeter
G1 X115.698 Y105.875 E0.00650 ; perimeter
G1 X115.530 Y105.926 E0.00814 ; perimeter
G1 X115.417 Y105.913 E0.00526 ; perimeter
G1 X115.252 Y105.828 E0.00860 ; perimeter
G1 X115.147 Y105.625 E0.01059 ; perimeter
G1 X115.138 Y105.443 E0.00841 ; perimeter
G1 X115.159 Y105.345 E0.00467 ; perimeter
G1 X115.222 Y105.222 E0.00640 ; perimeter
G1 X115.402 Y105.237 F10800.000 ; move inwards before travel
G1 X115.519 Y105.545 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310406
G1 F2400.000
G1 X115.516 Y105.497 E0.00107 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.519 Y105.545 E-0.01265 ; wipe and retract
;WIPE_END
G1 E-2.38735 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X115.774 Y112.281 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.728 Y112.323 E0.00290 ; perimeter
G1 X115.621 Y112.366 E0.00535 ; perimeter
G1 X115.439 Y112.374 E0.00843 ; perimeter
G1 X115.251 Y112.282 E0.00970 ; perimeter
G1 X115.207 Y112.195 E0.00454 ; perimeter
G1 X115.161 Y112.018 E0.00845 ; perimeter
G1 X115.164 Y111.891 E0.00587 ; perimeter
G1 X115.230 Y111.647 E0.01171 ; perimeter
G1 X115.293 Y111.567 E0.00475 ; perimeter
G1 X115.403 Y111.513 E0.00564 ; perimeter
G1 X115.523 Y111.498 E0.00561 ; perimeter
G1 X115.694 Y111.544 E0.00820 ; perimeter
G1 X115.812 Y111.660 E0.00767 ; perimeter
G1 X115.873 Y111.830 E0.00834 ; perimeter
G1 X115.859 Y112.100 E0.01253 ; perimeter
G1 X115.800 Y112.226 E0.00645 ; perimeter
G1 X115.712 Y112.274 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.728 Y112.323 E-0.03171 ; wipe and retract
G1 X115.621 Y112.366 E-0.03049 ; wipe and retract
G1 X115.439 Y112.374 E-0.04802 ; wipe and retract
G1 X115.251 Y112.282 E-0.05528 ; wipe and retract
G1 X115.207 Y112.195 E-0.02585 ; wipe and retract
G1 X115.161 Y112.018 E-0.04813 ; wipe and retract
G1 X115.164 Y111.891 E-0.03344 ; wipe and retract
G1 X115.230 Y111.647 E-0.06670 ; wipe and retract
G1 X115.293 Y111.567 E-0.02704 ; wipe and retract
G1 X115.403 Y111.513 E-0.03213 ; wipe and retract
G1 X115.523 Y111.498 E-0.03193 ; wipe and retract
G1 X115.694 Y111.544 E-0.04674 ; wipe and retract
G1 X115.812 Y111.660 E-0.04370 ; wipe and retract
G1 X115.873 Y111.830 E-0.04753 ; wipe and retract
G1 X115.859 Y112.100 E-0.07140 ; wipe and retract
G1 X115.800 Y112.226 E-0.03677 ; wipe and retract
;WIPE_END
G1 E-1.72310 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X115.431 Y114.621 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.563 Y114.682 E0.00674 ; perimeter
G1 X115.632 Y114.743 E0.00426 ; perimeter
G1 X115.716 Y114.896 E0.00809 ; perimeter
G1 X115.740 Y115.020 E0.00583 ; perimeter
G1 X115.684 Y115.209 E0.00915 ; perimeter
G1 X115.597 Y115.327 E0.00678 ; perimeter
G1 X115.198 Y115.679 E0.02466 ; perimeter
G1 X115.093 Y115.793 E0.00717 ; perimeter
G1 X114.879 Y115.948 E0.01227 ; perimeter
G1 X114.731 Y115.998 E0.00721 ; perimeter
G1 X114.578 Y115.985 E0.00714 ; perimeter
G1 X114.435 Y115.889 E0.00798 ; perimeter
G1 X114.299 Y115.661 E0.01229 ; perimeter
G1 X114.289 Y115.536 E0.00581 ; perimeter
G1 X114.331 Y115.413 E0.00601 ; perimeter
G1 X114.499 Y115.195 E0.01275 ; perimeter
G1 X115.088 Y114.689 E0.03597 ; perimeter
G1 X115.150 Y114.658 E0.00319 ; perimeter
G1 X115.371 Y114.617 E0.01044 ; perimeter
G1 X115.474 Y114.760 F10800.000 ; move inwards before travel
G1 X115.398 Y114.871 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314061
G1 F2400.000
G1 X115.336 Y115.014 E0.00351 ; infill
G1 X114.804 Y115.485 E0.01600 ; infill
G1 X114.713 Y115.573 E0.00285 ; infill
G1 X114.699 Y115.629 E0.00131 ; infill
;WIDTH:0.28062
G1 X114.693 Y115.645 E0.00034 ; infill
;WIDTH:0.253708
G1 X114.679 Y115.752 E0.00189 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.693 Y115.645 E-0.02844 ; wipe and retract
;WIPE_END
G1 E-2.37156 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X111.910 Y115.462 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.979 Y115.529 E0.00447 ; perimeter
G1 X112.040 Y115.679 E0.00750 ; perimeter
G1 X112.018 Y115.928 E0.01157 ; perimeter
G1 X111.970 Y116.015 E0.00458 ; perimeter
G1 X111.881 Y116.087 E0.00534 ; perimeter
G1 X111.766 Y116.126 E0.00565 ; perimeter
G1 X111.555 Y116.134 E0.00978 ; perimeter
G1 X111.381 Y116.068 E0.00859 ; perimeter
G1 X111.276 Y115.942 E0.00759 ; perimeter
G1 X111.244 Y115.677 E0.01238 ; perimeter
G1 X111.294 Y115.524 E0.00745 ; perimeter
G1 X111.330 Y115.486 E0.00241 ; perimeter
G1 X111.577 Y115.398 E0.01212 ; perimeter
G1 X111.794 Y115.413 E0.01008 ; perimeter
G1 X111.855 Y115.439 E0.00305 ; perimeter
G1 X111.905 Y115.558 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.979 Y115.529 E-0.04062 ; wipe and retract
G1 X112.040 Y115.679 E-0.04273 ; wipe and retract
G1 X112.018 Y115.928 E-0.06590 ; wipe and retract
G1 X111.970 Y116.015 E-0.02608 ; wipe and retract
G1 X111.881 Y116.087 E-0.03040 ; wipe and retract
G1 X111.766 Y116.126 E-0.03217 ; wipe and retract
G1 X111.555 Y116.134 E-0.05570 ; wipe and retract
G1 X111.381 Y116.068 E-0.04895 ; wipe and retract
G1 X111.276 Y115.942 E-0.04326 ; wipe and retract
G1 X111.244 Y115.677 E-0.07053 ; wipe and retract
G1 X111.294 Y115.524 E-0.04247 ; wipe and retract
G1 X111.330 Y115.486 E-0.01375 ; wipe and retract
G1 X111.577 Y115.398 E-0.06905 ; wipe and retract
G1 X111.794 Y115.413 E-0.05744 ; wipe and retract
G1 X111.855 Y115.439 E-0.01737 ; wipe and retract
;WIPE_END
G1 E-1.74359 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X108.921 Y113.070 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.901 Y113.200 E0.00609 ; perimeter
G1 X108.855 Y113.249 E0.00310 ; perimeter
G1 X108.709 Y113.309 E0.00731 ; perimeter
G1 X108.621 Y113.306 E0.00410 ; perimeter
G1 X108.431 Y113.248 E0.00920 ; perimeter
G1 X108.258 Y113.148 E0.00926 ; perimeter
G1 X107.986 Y112.845 E0.01883 ; perimeter
G1 X107.854 Y112.551 E0.01492 ; perimeter
G1 X107.832 Y112.419 E0.00621 ; perimeter
G1 X107.855 Y112.241 E0.00834 ; perimeter
G1 X107.893 Y112.169 E0.00375 ; perimeter
G1 X107.956 Y112.128 E0.00348 ; perimeter
G1 X108.040 Y112.112 E0.00400 ; perimeter
G1 X108.213 Y112.129 E0.00801 ; perimeter
G1 X108.443 Y112.234 E0.01172 ; perimeter
G1 X108.552 Y112.319 E0.00640 ; perimeter
G1 X108.726 Y112.521 E0.01237 ; perimeter
G1 X108.839 Y112.693 E0.00955 ; perimeter
G1 X108.909 Y112.904 E0.01027 ; perimeter
G1 X108.922 Y113.010 E0.00496 ; perimeter
G1 X108.805 Y113.133 F10800.000 ; move inwards before travel
G1 X108.680 Y113.027 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316365
G1 F2400.000
G1 X108.486 Y112.843 E0.00610 ; infill
G1 X108.318 Y112.640 E0.00600 ; infill
G1 X108.142 Y112.364 E0.00743 ; infill
G1 X108.097 Y112.359 F10800.000 ; move to first infill point
;WIDTH:0.139675
G1 F2400.000
G1 X108.137 Y112.412 E0.00054 ; infill
;WIDTH:0.181279
G1 X108.150 Y112.441 E0.00036 ; infill
;WIDTH:0.201053
G1 X108.620 Y113.054 E0.01015 ; infill
G1 X108.669 Y113.058 F10800.000 ; move to first infill point
;WIDTH:0.131845
G1 F2400.000
G1 X108.084 Y112.420 E0.00640 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.669 Y113.058 E-0.22826 ; wipe and retract
;WIPE_END
G1 E-2.17174 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X107.019 Y108.634 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.861 Y108.672 E0.00756 ; perimeter
G1 X106.648 Y108.625 E0.01009 ; perimeter
G1 X106.508 Y108.558 E0.00719 ; perimeter
G1 X106.386 Y108.323 E0.01227 ; perimeter
G1 X106.384 Y108.239 E0.00388 ; perimeter
G1 X106.332 Y107.999 E0.01137 ; perimeter
G1 X106.369 Y107.852 E0.00702 ; perimeter
G1 X106.763 Y107.770 E0.01865 ; perimeter
G1 X106.930 Y107.804 E0.00787 ; perimeter
G1 X107.103 Y107.918 E0.00961 ; perimeter
G1 X107.223 Y108.118 E0.01078 ; perimeter
G1 X107.250 Y108.212 E0.00456 ; perimeter
G1 X107.246 Y108.325 E0.00524 ; perimeter
G1 X107.174 Y108.515 E0.00940 ; perimeter
G1 X107.067 Y108.599 E0.00627 ; perimeter
G1 X106.883 Y108.545 F10800.000 ; move inwards before travel
G1 X106.794 Y108.195 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.39464
G1 F2400.000
G1 X106.801 Y108.210 E0.00047 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.794 Y108.195 E-0.00426 ; wipe and retract
;WIPE_END
G1 E-2.39574 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X103.661 Y106.255 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.703 Y106.178 E0.00408 ; perimeter
G1 X103.949 Y106.072 E0.01243 ; perimeter
G1 X104.395 Y106.041 E0.02071 ; perimeter
G1 X104.590 Y106.077 E0.00918 ; perimeter
G1 X104.812 Y106.149 E0.01080 ; perimeter
G1 X105.048 Y106.317 E0.01341 ; perimeter
G1 X105.216 Y106.502 E0.01157 ; perimeter
G1 X105.281 Y106.776 E0.01306 ; perimeter
G1 X105.272 Y106.863 E0.00407 ; perimeter
G1 X105.190 Y106.965 E0.00604 ; perimeter
G1 X104.977 Y107.056 E0.01073 ; perimeter
G1 X104.810 Y107.063 E0.00772 ; perimeter
G1 X104.697 Y107.043 E0.00535 ; perimeter
G1 X104.591 Y106.980 E0.00567 ; perimeter
G1 X104.185 Y106.808 E0.02047 ; perimeter
G1 X103.984 Y106.617 E0.01281 ; perimeter
G1 X103.820 Y106.557 E0.00809 ; perimeter
G1 X103.754 Y106.509 E0.00381 ; perimeter
G1 X103.722 Y106.464 E0.00252 ; perimeter
G1 X103.678 Y106.313 E0.00731 ; perimeter
G1 X103.745 Y106.229 F10800.000 ; move inwards before travel
G1 X103.985 Y106.319 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.169683
G1 F2400.000
G1 X104.945 Y106.561 E0.01043 ; infill
G1 X104.376 Y106.284 F10800.000 ; move to first infill point
;WIDTH:0.299379
G1 F2400.000
G1 X105.005 Y106.782 E0.01711 ; infill
G1 X105.026 Y106.773 F10800.000 ; move to first infill point
;WIDTH:0.347464
G1 F2400.000
G1 X104.619 Y106.532 E0.01198 ; infill
G1 X104.413 Y106.460 E0.00553 ; infill
G1 X104.104 Y106.303 E0.00879 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.413 Y106.460 E-0.09155 ; wipe and retract
G1 X104.619 Y106.532 E-0.05764 ; wipe and retract
G1 X105.026 Y106.773 E-0.12480 ; wipe and retract
;WIPE_END
G1 E-2.12602 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X101.971 Y104.865 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.836 Y104.858 E0.00625 ; perimeter
G1 X101.702 Y104.811 E0.00659 ; perimeter
G1 X101.531 Y104.711 E0.00919 ; perimeter
G1 X101.317 Y104.527 E0.01308 ; perimeter
G1 X101.033 Y104.233 E0.01892 ; perimeter
G1 X100.861 Y103.988 E0.01386 ; perimeter
G1 X100.705 Y103.727 E0.01409 ; perimeter
G1 X100.700 Y103.662 E0.00302 ; perimeter
G1 X100.552 Y103.340 E0.01639 ; perimeter
G1 X100.553 Y103.238 E0.00472 ; perimeter
G1 X100.520 Y103.073 E0.00780 ; perimeter
G1 X100.538 Y102.888 E0.00861 ; perimeter
G1 X100.633 Y102.713 E0.00924 ; perimeter
G1 X100.768 Y102.691 E0.00636 ; perimeter
G1 X100.831 Y102.704 E0.00297 ; perimeter
G1 X101.032 Y102.821 E0.01074 ; perimeter
G1 X101.184 Y102.963 E0.00965 ; perimeter
G1 X101.367 Y103.219 E0.01460 ; perimeter
G1 X101.813 Y103.972 E0.04053 ; perimeter
G1 X101.904 Y104.170 E0.01008 ; perimeter
G1 X101.952 Y104.490 E0.01500 ; perimeter
G1 X102.004 Y104.671 E0.00873 ; perimeter
G1 X101.981 Y104.806 E0.00631 ; perimeter
G1 X101.855 Y104.795 F10800.000 ; move inwards before travel
G1 X101.704 Y104.461 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.268604
G1 F2400.000
G1 X101.411 Y104.061 E0.00929 ; infill
;WIDTH:0.368767
G1 X101.208 Y103.763 E0.00979 ; infill
G1 X101.034 Y103.437 E0.01002 ; infill
;WIDTH:0.356744
G1 X100.931 Y103.261 E0.00531 ; infill
;WIDTH:0.318592
G1 X100.917 Y103.215 E0.00109 ; infill
;WIDTH:0.289284
G1 X100.912 Y103.201 E0.00031 ; infill
;WIDTH:0.280953
G1 X100.781 Y102.954 E0.00555 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.912 Y103.201 E-0.07397 ; wipe and retract
;WIPE_END
G1 E-2.32603 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X98.866 Y99.367 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.767 Y99.349 E0.00468 ; perimeter
G1 X98.677 Y99.272 E0.00545 ; perimeter
G1 X98.603 Y99.134 E0.00728 ; perimeter
G1 X98.540 Y98.889 E0.01170 ; perimeter
G1 X98.525 Y98.502 E0.01795 ; perimeter
G1 X98.567 Y98.286 E0.01018 ; perimeter
G1 X98.766 Y97.999 E0.01619 ; perimeter
G1 X98.896 Y97.948 E0.00647 ; perimeter
G1 X98.993 Y97.978 E0.00468 ; perimeter
G1 X99.042 Y98.042 E0.00376 ; perimeter
G1 X99.190 Y98.116 E0.00767 ; perimeter
G1 X99.304 Y98.359 E0.01246 ; perimeter
G1 X99.373 Y98.757 E0.01871 ; perimeter
G1 X99.348 Y98.908 E0.00707 ; perimeter
G1 X99.171 Y99.222 E0.01670 ; perimeter
G1 X99.006 Y99.345 E0.00954 ; perimeter
G1 X98.925 Y99.358 E0.00379 ; perimeter
G1 X98.813 Y99.281 F10800.000 ; move inwards before travel
G1 X98.859 Y99.101 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.375493
G1 F2400.000
G1 X98.950 Y98.787 E0.00904 ; infill
G1 X98.927 Y98.533 E0.00706 ; infill
;WIDTH:0.362782
G1 X98.928 Y98.477 E0.00147 ; infill
;WIDTH:0.342798
G1 X98.899 Y98.240 E0.00596 ; infill
G1 X98.951 Y98.266 F10800.000 ; move to first infill point
;WIDTH:0.203581
G1 F2400.000
G1 X98.904 Y99.025 E0.01015 ; infill
;WIDTH:0.194711
G1 X98.904 Y99.029 E0.00005 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.904 Y99.025 E-0.00102 ; wipe and retract
;WIPE_END
G1 E-2.39898 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X107.651 Y97.304 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.262 Y97.487 E0.02161 ; perimeter
G1 X108.324 Y97.524 E0.00246 ; perimeter
G1 X108.943 Y98.125 E0.02917 ; perimeter
G1 X108.815 Y98.264 E0.00641 ; perimeter
G1 X108.761 Y98.295 E0.00213 ; perimeter
G1 X108.618 Y98.327 E0.00494 ; perimeter
G1 X108.497 Y98.277 E0.00443 ; perimeter
G1 X108.223 Y97.890 E0.01604 ; perimeter
G1 X107.910 Y97.534 E0.01607 ; perimeter
G1 X107.696 Y97.344 E0.00970 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.262 Y97.487 E-0.15424 ; wipe and retract
G1 X108.324 Y97.524 E-0.01915 ; wipe and retract
G1 X108.943 Y98.125 E-0.22742 ; wipe and retract
G1 X108.815 Y98.264 E-0.04997 ; wipe and retract
G1 X108.761 Y98.295 E-0.01657 ; wipe and retract
G1 X108.618 Y98.327 E-0.03852 ; wipe and retract
G1 X108.497 Y98.277 E-0.03456 ; wipe and retract
G1 X108.223 Y97.890 E-0.12506 ; wipe and retract
G1 X107.910 Y97.534 E-0.12528 ; wipe and retract
G1 X107.696 Y97.344 E-0.07561 ; wipe and retract
;WIPE_END
G1 E-1.53360 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X103.182 Y95.193 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.153 Y95.346 E0.04816 ; perimeter
G1 X101.705 Y95.351 E0.02077 ; perimeter
G1 X100.992 Y95.241 E0.03340 ; perimeter
G1 X100.543 Y95.062 E0.02242 ; perimeter
G1 X100.403 Y95.078 E0.00649 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.372 Y95.082 E0.00132 ; perimeter (bridge)
G1 X100.410 Y95.032 E0.00260 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.525 Y94.881 E0.00881 ; perimeter
G1 X100.718 Y94.738 E0.01110 ; perimeter
G1 X101.034 Y94.608 E0.01585 ; perimeter
G1 X102.221 Y94.482 E0.05531 ; perimeter
G1 X102.958 Y94.470 E0.03414 ; perimeter
G1 X103.746 Y94.581 E0.03683 ; perimeter
G1 X103.957 Y94.647 E0.01027 ; perimeter
G1 X104.248 Y94.821 E0.01567 ; perimeter
G1 X104.369 Y94.866 E0.00600 ; perimeter
G1 X104.612 Y95.046 E0.01399 ; perimeter
G1 X104.672 Y95.118 E0.00433 ; perimeter
G1 X105.154 Y95.342 E0.02461 ; perimeter
G1 X105.502 Y95.398 E0.01636 ; perimeter
G1 X105.896 Y95.526 E0.01919 ; perimeter
G1 X106.134 Y95.582 E0.01133 ; perimeter
G1 X106.600 Y95.819 E0.02417 ; perimeter
G1 X107.019 Y96.138 E0.02442 ; perimeter
G1 X107.388 Y96.511 E0.02433 ; perimeter
G1 X107.826 Y96.853 E0.02572 ; perimeter
G1 X108.459 Y97.043 E0.03062 ; perimeter
G1 X108.618 Y97.138 E0.00858 ; perimeter
G1 X109.293 Y97.774 E0.04295 ; perimeter
G1 X109.480 Y98.075 E0.01640 ; perimeter
G1 X109.533 Y98.223 E0.00728 ; perimeter
G1 X109.455 Y98.407 E0.00926 ; perimeter
G1 X109.284 Y98.466 E0.00838 ; perimeter
G1 X109.120 Y98.646 E0.01129 ; perimeter
G1 X108.945 Y98.745 E0.00932 ; perimeter
G1 X108.694 Y98.812 E0.01202 ; perimeter
G1 X108.524 Y98.807 E0.00787 ; perimeter
G1 X108.316 Y98.729 E0.01030 ; perimeter
G1 X108.164 Y98.642 E0.00810 ; perimeter
G1 X107.844 Y98.189 E0.02566 ; perimeter
G1 X107.568 Y97.874 E0.01941 ; perimeter
G1 X107.087 Y97.449 E0.02976 ; perimeter
G1 X106.661 Y96.819 E0.03521 ; perimeter
G1 X106.171 Y96.447 E0.02849 ; perimeter
G1 X105.865 Y96.354 E0.01480 ; perimeter
G1 X105.121 Y96.016 E0.03788 ; perimeter
G1 X104.647 Y95.739 E0.02540 ; perimeter
G1 X104.203 Y95.601 E0.02156 ; perimeter
G1 X103.976 Y95.493 E0.01164 ; perimeter
G1 X103.238 Y95.214 E0.03655 ; perimeter
G1 X102.992 Y94.841 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.153 Y95.346 E-0.28831 ; wipe and retract
G1 X101.705 Y95.351 E-0.11832 ; wipe and retract
G1 X100.992 Y95.241 E-0.19029 ; wipe and retract
G1 X100.543 Y95.062 E-0.12773 ; wipe and retract
G1 X100.403 Y95.078 E-0.03696 ; wipe and retract
;WIPE_END
G1 E-1.63840 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X98.922 Y96.131 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.853 Y96.009 E0.00650 ; perimeter
G1 X98.871 Y95.895 E0.00533 ; perimeter
G1 X98.839 Y95.735 E0.00757 ; perimeter
G1 X98.940 Y95.343 E0.01872 ; perimeter
G1 X99.096 Y95.141 E0.01183 ; perimeter
G1 X99.164 Y95.092 E0.00387 ; perimeter
G1 X99.483 Y95.007 E0.01528 ; perimeter
G1 X99.697 Y94.988 E0.00996 ; perimeter
G1 X99.934 Y95.083 E0.01183 ; perimeter
G1 X100.038 Y95.052 E0.00502 ; perimeter
G1 X100.108 Y95.112 E0.00428 ; perimeter
G1 X99.977 Y95.127 E0.00610 ; perimeter
G1 X99.928 Y95.417 E0.01366 ; perimeter
G1 X99.818 Y95.559 E0.00831 ; perimeter
G1 X99.800 Y95.695 E0.00637 ; perimeter
G1 X99.545 Y96.022 E0.01920 ; perimeter
G1 X99.349 Y96.144 E0.01066 ; perimeter
G1 X99.193 Y96.150 E0.00725 ; perimeter
G1 X99.143 Y96.184 E0.00284 ; perimeter
G1 X98.979 Y96.151 E0.00774 ; perimeter
G1 X98.951 Y95.994 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.853 Y96.009 E-0.05010 ; wipe and retract
G1 X98.871 Y95.895 E-0.03039 ; wipe and retract
G1 X98.839 Y95.735 E-0.04315 ; wipe and retract
G1 X98.940 Y95.343 E-0.10664 ; wipe and retract
G1 X99.096 Y95.141 E-0.06741 ; wipe and retract
G1 X99.164 Y95.092 E-0.02207 ; wipe and retract
G1 X99.483 Y95.007 E-0.08703 ; wipe and retract
G1 X99.697 Y94.988 E-0.05673 ; wipe and retract
G1 X99.934 Y95.083 E-0.06737 ; wipe and retract
G1 X100.038 Y95.052 E-0.02861 ; wipe and retract
G1 X100.108 Y95.112 E-0.02436 ; wipe and retract
G1 X99.977 Y95.127 E-0.03474 ; wipe and retract
G1 X99.928 Y95.417 E-0.07781 ; wipe and retract
G1 X99.818 Y95.559 E-0.04733 ; wipe and retract
G1 X99.800 Y95.695 E-0.03627 ; wipe and retract
G1 X99.545 Y96.022 E-0.10939 ; wipe and retract
G1 X99.349 Y96.144 E-0.06075 ; wipe and retract
G1 X99.193 Y96.150 E-0.04131 ; wipe and retract
G1 X99.143 Y96.184 E-0.01617 ; wipe and retract
G1 X98.979 Y96.151 E-0.04407 ; wipe and retract
;WIPE_END
G1 E-1.34829 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 X100.918 Y94.952 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.215746
G1 F2400.000
G1 X101.115 Y94.928 E0.00285 ; infill
;WIDTH:0.255678
G1 X101.270 Y94.932 E0.00274 ; infill
;WIDTH:0.295608
G1 X101.425 Y94.936 E0.00325 ; infill
;WIDTH:0.335538
G1 X101.580 Y94.940 E0.00377 ; infill
;WIDTH:0.364241
G1 X102.120 Y94.921 E0.01444 ; infill
G1 X102.759 Y94.862 E0.01714 ; infill
;WIDTH:0.250876
G1 X103.245 Y94.849 E0.00841 ; infill
;WIDTH:0.26213
G1 X103.797 Y95.007 E0.01046 ; infill
G1 X104.192 Y95.191 E0.00795 ; infill
G1 X104.376 Y95.297 E0.00387 ; infill
G1 X104.468 Y95.358 F10800.000 ; move to first infill point
;WIDTH:0.133452
G1 F2400.000
G1 X104.768 Y95.478 E0.00243 ; infill
;WIDTH:0.167906
G1 X105.072 Y95.636 E0.00357 ; infill
;WIDTH:0.208169
G1 X105.176 Y95.673 E0.00151 ; infill
;WIDTH:0.248432
G1 X105.279 Y95.710 E0.00188 ; infill
;WIDTH:0.293493
G1 X105.994 Y95.966 E0.01583 ; infill
G1 X106.365 Y96.121 E0.00837 ; infill
G1 X106.768 Y96.424 E0.01050 ; infill
G1 X106.942 Y96.581 E0.00489 ; infill
;WIDTH:0.319571
G1 X107.031 Y96.690 E0.00324 ; infill
;WIDTH:0.350509
G1 X107.133 Y96.813 E0.00410 ; infill
;WIDTH:0.392119
G1 X107.295 Y96.986 E0.00686 ; infill
;WIDTH:0.433726
G1 X107.456 Y97.158 E0.00768 ; infill
;LAYER_CHANGE
;Z:13.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;13.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.295 Y96.986 E-0.06234 ; wipe and retract
;WIPE_END
G1 E-2.33766 F2400.000 ; retract
G1 Z13.075 F10800.000 ; lift Z
G1 Z13.200 ; move to next layer (65)
;AFTER_LAYER_CHANGE
;13.2
G1 Z13.275 ; lift Z
G1 X111.929 Y102.344 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.045 Y102.392 E0.00425 ; perimeter
G1 X111.982 Y102.373 E0.00224 ; perimeter
G1 X112.470 Y102.762 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.333 Y102.842 E0.00735 ; perimeter
G1 X112.210 Y102.882 E0.00599 ; perimeter
G1 X112.073 Y102.884 E0.00637 ; perimeter
G1 X111.851 Y102.850 E0.01038 ; perimeter
G1 X111.620 Y102.724 E0.01220 ; perimeter
G1 X111.358 Y102.460 E0.01724 ; perimeter
G1 X111.290 Y102.350 E0.00598 ; perimeter
G1 X111.031 Y102.039 E0.01876 ; perimeter
G1 X110.700 Y101.745 E0.02052 ; perimeter
G1 X110.505 Y101.656 E0.00991 ; perimeter
G1 X110.145 Y101.412 E0.02015 ; perimeter
G1 X109.988 Y101.224 E0.01132 ; perimeter
G1 X109.953 Y101.089 E0.00649 ; perimeter
G1 X109.992 Y100.779 E0.01443 ; perimeter
G1 X109.987 Y100.699 E0.00371 ; perimeter
G1 X110.205 Y100.310 E0.02069 ; perimeter
G1 X110.385 Y100.116 E0.01224 ; perimeter
G1 X110.436 Y100.123 E0.00239 ; perimeter
G1 X110.519 Y100.232 E0.00631 ; perimeter
G1 X110.875 Y100.788 E0.03060 ; perimeter
G1 X110.920 Y100.901 E0.00564 ; perimeter
G1 X111.319 Y101.358 E0.02809 ; perimeter
G1 X111.536 Y101.508 E0.01222 ; perimeter
G1 X111.872 Y101.799 E0.02061 ; perimeter
G1 X112.388 Y102.012 E0.02586 ; perimeter
G1 X112.505 Y102.091 E0.00650 ; perimeter
G1 X112.684 Y102.319 E0.01344 ; perimeter
G1 X112.690 Y102.466 E0.00682 ; perimeter
G1 X112.634 Y102.461 E0.00259 ; perimeter
G1 X112.548 Y102.668 E0.01037 ; perimeter
G1 X112.504 Y102.714 E0.00295 ; perimeter
G1 X112.321 Y102.709 F10800.000 ; move inwards before travel
G1 X113.166 Y102.623 ; move to first perimeter point
G1 F1800.000
G1 X113.241 Y102.549 E0.00485 ; perimeter
G1 X113.315 Y102.551 E0.00344 ; perimeter
G1 X113.590 Y102.400 E0.01452 ; perimeter
G1 X113.781 Y102.428 E0.00895 ; perimeter
G1 X113.941 Y102.424 E0.00742 ; perimeter
G1 X114.008 Y102.457 E0.00344 ; perimeter
G1 X114.103 Y102.549 E0.00611 ; perimeter
G1 X114.194 Y102.598 E0.00480 ; perimeter
G1 X114.285 Y102.716 E0.00692 ; perimeter
G1 X114.344 Y102.859 E0.00715 ; perimeter
G1 X114.349 Y103.071 E0.00984 ; perimeter
G1 X114.280 Y103.242 E0.00852 ; perimeter
G1 X114.201 Y103.307 E0.00477 ; perimeter
G1 X113.982 Y103.360 E0.01043 ; perimeter
G1 X113.857 Y103.365 E0.00581 ; perimeter
G1 X113.689 Y103.347 E0.00782 ; perimeter
G1 X113.439 Y103.260 E0.01224 ; perimeter
G1 X113.243 Y103.040 E0.01365 ; perimeter
G1 X113.236 Y102.873 E0.00771 ; perimeter
G1 X113.182 Y102.681 E0.00926 ; perimeter
G1 X113.271 Y102.617 F10800.000 ; move inwards before travel
G1 X112.374 Y102.315 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.146204
G1 F2400.000
G1 X112.277 Y102.595 E0.00255 ; infill
G1 X111.629 Y102.391 F10800.000 ; move to first infill point
;WIDTH:0.350023
G1 F2400.000
G1 X111.601 Y102.096 E0.00756 ; infill
G1 X111.456 Y101.948 E0.00531 ; infill
;WIDTH:0.331301
G1 X111.310 Y101.799 E0.00499 ; infill
;WIDTH:0.297356
G1 X111.096 Y101.628 E0.00580 ; infill
;WIDTH:0.260754
G1 X110.629 Y101.201 E0.01146 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.096 Y101.628 E-0.16691 ; wipe and retract
;WIPE_END
G1 E-2.23309 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X115.219 Y105.204 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.258 Y105.166 E0.00251 ; perimeter
G1 X115.413 Y105.094 E0.00790 ; perimeter
G1 X115.513 Y105.088 E0.00467 ; perimeter
G1 X115.643 Y105.108 E0.00609 ; perimeter
G1 X115.774 Y105.178 E0.00687 ; perimeter
G1 X115.828 Y105.234 E0.00360 ; perimeter
G1 X115.885 Y105.377 E0.00714 ; perimeter
G1 X115.876 Y105.639 E0.01213 ; perimeter
G1 X115.822 Y105.749 E0.00567 ; perimeter
G1 X115.697 Y105.853 E0.00753 ; perimeter
G1 X115.528 Y105.902 E0.00813 ; perimeter
G1 X115.413 Y105.888 E0.00538 ; perimeter
G1 X115.272 Y105.818 E0.00729 ; perimeter
G1 X115.150 Y105.611 E0.01111 ; perimeter
G1 X115.137 Y105.489 E0.00568 ; perimeter
G1 X115.158 Y105.331 E0.00740 ; perimeter
G1 X115.193 Y105.258 E0.00376 ; perimeter
G1 X115.273 Y105.209 F10800.000 ; move inwards before travel
G1 X115.522 Y105.524 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.308995
G1 F2400.000
G1 X115.497 Y105.441 E0.00191 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.522 Y105.524 E-0.02282 ; wipe and retract
;WIPE_END
G1 E-2.37718 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X115.697 Y112.420 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.596 Y112.450 E0.00488 ; perimeter
G1 X115.425 Y112.451 E0.00790 ; perimeter
G1 X115.292 Y112.391 E0.00680 ; perimeter
G1 X115.245 Y112.345 E0.00304 ; perimeter
G1 X115.187 Y112.214 E0.00661 ; perimeter
G1 X115.161 Y112.099 E0.00547 ; perimeter
G1 X115.167 Y111.909 E0.00880 ; perimeter
G1 X115.217 Y111.744 E0.00796 ; perimeter
G1 X115.296 Y111.642 E0.00598 ; perimeter
G1 X115.402 Y111.590 E0.00543 ; perimeter
G1 X115.535 Y111.575 E0.00624 ; perimeter
G1 X115.687 Y111.614 E0.00725 ; perimeter
G1 X115.803 Y111.721 E0.00732 ; perimeter
G1 X115.876 Y111.921 E0.00984 ; perimeter
G1 X115.872 Y112.129 E0.00965 ; perimeter
G1 X115.786 Y112.338 E0.01047 ; perimeter
G1 X115.741 Y112.379 E0.00281 ; perimeter
G1 X115.605 Y112.369 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.596 Y112.450 E-0.04261 ; wipe and retract
G1 X115.425 Y112.451 E-0.04502 ; wipe and retract
G1 X115.292 Y112.391 E-0.03876 ; wipe and retract
G1 X115.245 Y112.345 E-0.01732 ; wipe and retract
G1 X115.187 Y112.214 E-0.03767 ; wipe and retract
G1 X115.161 Y112.099 E-0.03118 ; wipe and retract
G1 X115.167 Y111.909 E-0.05015 ; wipe and retract
G1 X115.217 Y111.744 E-0.04537 ; wipe and retract
G1 X115.296 Y111.642 E-0.03408 ; wipe and retract
G1 X115.402 Y111.590 E-0.03094 ; wipe and retract
G1 X115.535 Y111.575 E-0.03552 ; wipe and retract
G1 X115.687 Y111.614 E-0.04131 ; wipe and retract
G1 X115.803 Y111.721 E-0.04168 ; wipe and retract
G1 X115.876 Y111.921 E-0.05607 ; wipe and retract
G1 X115.872 Y112.129 E-0.05496 ; wipe and retract
G1 X115.786 Y112.338 E-0.05966 ; wipe and retract
G1 X115.741 Y112.379 E-0.01600 ; wipe and retract
;WIPE_END
G1 E-1.72169 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X115.431 Y114.604 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.573 Y114.671 E0.00730 ; perimeter
G1 X115.653 Y114.748 E0.00512 ; perimeter
G1 X115.725 Y114.879 E0.00693 ; perimeter
G1 X115.749 Y115.025 E0.00687 ; perimeter
G1 X115.698 Y115.191 E0.00803 ; perimeter
G1 X115.597 Y115.325 E0.00776 ; perimeter
G1 X115.221 Y115.657 E0.02327 ; perimeter
G1 X115.095 Y115.794 E0.00859 ; perimeter
G1 X114.882 Y115.949 E0.01224 ; perimeter
G1 X114.729 Y116.000 E0.00743 ; perimeter
G1 X114.597 Y115.989 E0.00616 ; perimeter
G1 X114.443 Y115.889 E0.00851 ; perimeter
G1 X114.314 Y115.672 E0.01168 ; perimeter
G1 X114.301 Y115.575 E0.00453 ; perimeter
G1 X114.346 Y115.395 E0.00859 ; perimeter
G1 X114.497 Y115.201 E0.01139 ; perimeter
G1 X115.114 Y114.667 E0.03778 ; perimeter
G1 X115.371 Y114.601 E0.01231 ; perimeter
G1 X115.495 Y114.748 F10800.000 ; move inwards before travel
G1 X115.345 Y115.003 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.353535
G1 F2400.000
G1 X114.739 Y115.545 E0.02100 ; infill
G1 X114.716 Y115.591 E0.00131 ; infill
;WIDTH:0.335587
G1 X114.711 Y115.617 E0.00065 ; infill
;WIDTH:0.299489
G1 X114.663 Y115.744 E0.00290 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.711 Y115.617 E-0.03593 ; wipe and retract
;WIPE_END
G1 E-2.36407 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X111.877 Y115.460 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.930 Y115.509 E0.00331 ; perimeter
G1 X112.006 Y115.693 E0.00923 ; perimeter
G1 X111.981 Y115.935 E0.01128 ; perimeter
G1 X111.938 Y116.013 E0.00414 ; perimeter
G1 X111.845 Y116.092 E0.00566 ; perimeter
G1 X111.749 Y116.126 E0.00468 ; perimeter
G1 X111.601 Y116.140 E0.00689 ; perimeter
G1 X111.457 Y116.118 E0.00676 ; perimeter
G1 X111.353 Y116.073 E0.00527 ; perimeter
G1 X111.231 Y115.925 E0.00886 ; perimeter
G1 X111.205 Y115.711 E0.01002 ; perimeter
G1 X111.247 Y115.520 E0.00905 ; perimeter
G1 X111.289 Y115.474 E0.00288 ; perimeter
G1 X111.555 Y115.397 E0.01282 ; perimeter
G1 X111.768 Y115.414 E0.00988 ; perimeter
G1 X111.822 Y115.437 E0.00272 ; perimeter
G1 X111.874 Y115.532 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.930 Y115.509 E-0.03422 ; wipe and retract
G1 X112.006 Y115.693 E-0.05256 ; wipe and retract
G1 X111.981 Y115.935 E-0.06429 ; wipe and retract
G1 X111.938 Y116.013 E-0.02361 ; wipe and retract
G1 X111.845 Y116.092 E-0.03222 ; wipe and retract
G1 X111.749 Y116.126 E-0.02666 ; wipe and retract
G1 X111.601 Y116.140 E-0.03922 ; wipe and retract
G1 X111.457 Y116.118 E-0.03852 ; wipe and retract
G1 X111.353 Y116.073 E-0.03005 ; wipe and retract
G1 X111.231 Y115.925 E-0.05050 ; wipe and retract
G1 X111.205 Y115.711 E-0.05706 ; wipe and retract
G1 X111.247 Y115.520 E-0.05158 ; wipe and retract
G1 X111.289 Y115.474 E-0.01639 ; wipe and retract
G1 X111.555 Y115.397 E-0.07303 ; wipe and retract
G1 X111.768 Y115.414 E-0.05630 ; wipe and retract
G1 X111.822 Y115.437 E-0.01552 ; wipe and retract
;WIPE_END
G1 E-1.73828 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X108.124 Y112.280 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.333 Y112.285 E0.00969 ; perimeter
G1 X108.436 Y112.317 E0.00499 ; perimeter
G1 X108.637 Y112.435 E0.01080 ; perimeter
G1 X108.935 Y112.783 E0.02123 ; perimeter
G1 X109.029 Y112.998 E0.01084 ; perimeter
G1 X109.059 Y113.124 E0.00600 ; perimeter
G1 X109.040 Y113.357 E0.01081 ; perimeter
G1 X108.925 Y113.486 E0.00799 ; perimeter
G1 X108.794 Y113.483 E0.00609 ; perimeter
G1 X108.567 Y113.415 E0.01099 ; perimeter
G1 X108.397 Y113.311 E0.00923 ; perimeter
G1 X108.105 Y112.983 E0.02032 ; perimeter
G1 X107.999 Y112.749 E0.01189 ; perimeter
G1 X107.960 Y112.518 E0.01087 ; perimeter
G1 X107.986 Y112.409 E0.00520 ; perimeter
G1 X108.022 Y112.345 E0.00340 ; perimeter
G1 X108.074 Y112.312 E0.00283 ; perimeter
G1 X108.268 Y112.431 F10800.000 ; move inwards before travel
G1 X108.221 Y112.519 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.206582
G1 F2400.000
G1 X108.303 Y112.614 E0.00171 ; infill
;WIDTH:0.242761
G1 X108.710 Y113.207 E0.01194 ; infill
G1 X108.234 Y112.684 F10800.000 ; move to first infill point
;WIDTH:0.236961
G1 F2400.000
G1 X108.811 Y113.197 E0.01246 ; infill
G1 X108.763 Y113.222 F10800.000 ; move to first infill point
;WIDTH:0.315006
G1 F2400.000
G1 X108.612 Y112.986 E0.00635 ; infill
G1 X108.427 Y112.773 E0.00637 ; infill
G1 X108.266 Y112.522 E0.00675 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.427 Y112.773 E-0.07876 ; wipe and retract
G1 X108.612 Y112.986 E-0.07434 ; wipe and retract
G1 X108.763 Y113.222 E-0.07412 ; wipe and retract
;WIPE_END
G1 E-2.17278 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X106.993 Y108.685 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.928 Y108.704 E0.00314 ; perimeter
G1 X106.678 Y108.620 E0.01221 ; perimeter
G1 X106.504 Y108.488 E0.01013 ; perimeter
G1 X106.393 Y108.277 E0.01102 ; perimeter
G1 X106.387 Y108.032 E0.01136 ; perimeter
G1 X106.454 Y107.879 E0.00772 ; perimeter
G1 X106.656 Y107.786 E0.01030 ; perimeter
G1 X106.780 Y107.781 E0.00576 ; perimeter
G1 X107.039 Y107.872 E0.01269 ; perimeter
G1 X107.171 Y107.974 E0.00777 ; perimeter
G1 X107.263 Y108.121 E0.00802 ; perimeter
G1 X107.299 Y108.248 E0.00609 ; perimeter
G1 X107.293 Y108.353 E0.00489 ; perimeter
G1 X107.248 Y108.517 E0.00785 ; perimeter
G1 X107.164 Y108.616 E0.00603 ; perimeter
G1 X107.050 Y108.666 E0.00578 ; perimeter
G1 X106.940 Y108.644 F10800.000 ; move inwards before travel
G1 X106.795 Y108.201 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.349148
G1 F2400.000
G1 X106.907 Y108.291 E0.00364 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.795 Y108.201 E-0.03776 ; wipe and retract
;WIPE_END
G1 E-2.36224 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X105.242 Y106.925 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.160 Y107.018 E0.00576 ; perimeter
G1 X104.935 Y107.096 E0.01100 ; perimeter
G1 X104.682 Y107.036 E0.01205 ; perimeter
G1 X104.387 Y106.874 E0.01559 ; perimeter
G1 X104.169 Y106.671 E0.01383 ; perimeter
G1 X103.966 Y106.365 E0.01701 ; perimeter
G1 X104.078 Y106.217 E0.00860 ; perimeter
G1 X104.157 Y106.167 E0.00433 ; perimeter
G1 X104.283 Y106.127 E0.00614 ; perimeter
G1 X104.582 Y106.114 E0.01383 ; perimeter
G1 X104.912 Y106.207 E0.01588 ; perimeter
G1 X105.113 Y106.355 E0.01159 ; perimeter
G1 X105.219 Y106.496 E0.00818 ; perimeter
G1 X105.282 Y106.619 E0.00638 ; perimeter
G1 X105.317 Y106.760 E0.00672 ; perimeter
G1 X105.267 Y106.870 E0.00561 ; perimeter
G1 X105.118 Y106.925 F10800.000 ; move inwards before travel
G1 X105.014 Y106.813 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.376212
G1 F2400.000
G1 X104.726 Y106.586 E0.01017 ; infill
G1 X104.276 Y106.403 E0.01346 ; infill
G1 X104.273 Y106.399 F10800.000 ; move to first infill point
;WIDTH:0.258953
G1 F2400.000
G1 X105.029 Y106.653 E0.01432 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.273 Y106.399 E-0.21038 ; wipe and retract
;WIPE_END
G1 E-2.18962 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X101.604 Y104.510 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.477 Y104.482 E0.00602 ; perimeter
G1 X101.258 Y104.324 E0.01250 ; perimeter
G1 X101.159 Y104.326 E0.00461 ; perimeter
G1 X101.109 Y104.295 E0.00271 ; perimeter
G1 X100.802 Y103.981 E0.02036 ; perimeter
G1 X100.668 Y103.736 E0.01293 ; perimeter
G1 X100.652 Y103.543 E0.00898 ; perimeter
G1 X100.623 Y103.472 E0.00356 ; perimeter
G1 X100.647 Y103.060 E0.01910 ; perimeter
G1 X100.754 Y102.959 E0.00683 ; perimeter
G1 X100.867 Y102.924 E0.00546 ; perimeter
G1 X100.912 Y102.933 E0.00213 ; perimeter
G1 X101.027 Y103.013 E0.00652 ; perimeter
G1 X101.118 Y103.031 E0.00429 ; perimeter
G1 X101.277 Y103.161 E0.00949 ; perimeter
G1 X101.471 Y103.417 E0.01489 ; perimeter
G1 X101.597 Y103.635 E0.01165 ; perimeter
G1 X101.757 Y103.993 E0.01816 ; perimeter
G1 X101.802 Y104.314 E0.01500 ; perimeter
G1 X101.777 Y104.487 E0.00810 ; perimeter
G1 X101.686 Y104.546 E0.00503 ; perimeter
G1 X101.659 Y104.534 E0.00135 ; perimeter
G1 X101.551 Y104.391 F10800.000 ; move inwards before travel
G1 X100.875 Y103.288 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.395409
G1 F2400.000
G1 X101.290 Y103.925 E0.02228 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.875 Y103.288 E-0.20058 ; wipe and retract
;WIPE_END
G1 E-2.19942 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X98.761 Y99.498 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.669 Y99.423 E0.00552 ; perimeter
G1 X98.588 Y99.252 E0.00875 ; perimeter
G1 X98.521 Y98.977 E0.01314 ; perimeter
G1 X98.493 Y98.332 E0.02991 ; perimeter
G1 X98.530 Y98.133 E0.00936 ; perimeter
G1 X98.569 Y98.072 E0.00337 ; perimeter
G1 X98.661 Y97.753 E0.01538 ; perimeter
G1 X98.780 Y97.519 E0.01215 ; perimeter
G1 X98.882 Y97.613 E0.00639 ; perimeter
G1 X99.265 Y98.205 E0.03266 ; perimeter
G1 X99.335 Y98.742 E0.02512 ; perimeter
G1 X99.309 Y98.977 E0.01096 ; perimeter
G1 X99.266 Y99.053 E0.00401 ; perimeter
G1 X99.186 Y99.315 E0.01270 ; perimeter
G1 X99.108 Y99.371 E0.00448 ; perimeter
G1 X99.002 Y99.527 E0.00871 ; perimeter
G1 X98.929 Y99.545 E0.00347 ; perimeter
G1 X98.819 Y99.514 E0.00530 ; perimeter
G1 X98.758 Y99.379 F10800.000 ; move inwards before travel
G1 X98.866 Y99.277 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.186898
G1 F2400.000
G1 X98.885 Y99.147 E0.00157 ; infill
;WIDTH:0.197375
G1 X98.888 Y99.138 E0.00013 ; infill
;WIDTH:0.23155
G1 X99.080 Y98.616 E0.00872 ; infill
G1 X98.810 Y98.107 F10800.000 ; move to first infill point
;WIDTH:0.357405
G1 F2400.000
G1 X98.897 Y98.393 E0.00781 ; infill
G1 X98.922 Y98.740 E0.00910 ; infill
G1 X98.911 Y98.881 E0.00368 ; infill
;WIDTH:0.34813
G1 X98.904 Y98.915 E0.00088 ; infill
;WIDTH:0.33263
G1 X98.860 Y99.264 E0.00849 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.904 Y98.915 E-0.09300 ; wipe and retract
;WIPE_END
G1 E-2.30700 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X107.905 Y97.344 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.975 Y97.347 E0.00236 ; perimeter
G1 X108.559 Y97.500 E0.02043 ; perimeter
G1 X108.667 Y97.563 E0.00424 ; perimeter
G1 X108.965 Y97.843 E0.01384 ; perimeter
G1 X109.157 Y98.138 E0.01193 ; perimeter
G1 X108.841 Y98.205 E0.01093 ; perimeter
G1 X108.648 Y98.191 E0.00656 ; perimeter
G1 X108.403 Y97.826 E0.01489 ; perimeter
G1 X108.128 Y97.496 E0.01454 ; perimeter
G1 X107.954 Y97.378 E0.00710 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.975 Y97.347 E-0.00971 ; wipe and retract
G1 X108.559 Y97.500 E-0.15930 ; wipe and retract
G1 X108.667 Y97.563 E-0.03304 ; wipe and retract
G1 X108.965 Y97.843 E-0.10789 ; wipe and retract
G1 X109.157 Y98.138 E-0.09297 ; wipe and retract
G1 X108.841 Y98.205 E-0.08525 ; wipe and retract
G1 X108.648 Y98.191 E-0.05111 ; wipe and retract
G1 X108.403 Y97.826 E-0.11607 ; wipe and retract
G1 X108.128 Y97.496 E-0.11337 ; wipe and retract
G1 X107.954 Y97.378 E-0.05536 ; wipe and retract
;WIPE_END
G1 E-1.57592 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X104.782 Y95.535 ; move to first perimeter point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.509 Y95.528 E0.01264 ; perimeter
G1 X104.401 Y95.496 E0.00523 ; perimeter
G1 X103.989 Y95.464 E0.01913 ; perimeter
G1 X103.210 Y95.226 E0.03773 ; perimeter
G1 X102.916 Y95.265 E0.01377 ; perimeter
G1 X102.642 Y95.252 E0.01271 ; perimeter
G1 X102.347 Y95.277 E0.01370 ; perimeter
G1 X102.149 Y95.254 E0.00923 ; perimeter
G1 X101.803 Y95.252 E0.01602 ; perimeter
G1 X101.535 Y95.301 E0.01261 ; perimeter
G1 X101.359 Y95.284 E0.00819 ; perimeter
G1 X101.144 Y95.295 E0.01000 ; perimeter
G1 X100.571 Y95.242 E0.02666 ; perimeter
G1 X100.167 Y95.327 E0.01910 ; perimeter
G1 X99.960 Y95.524 E0.01323 ; perimeter
G1 X99.854 Y95.583 E0.00562 ; perimeter
G1 X99.675 Y95.836 E0.01438 ; perimeter
G1 X99.475 Y96.060 E0.01392 ; perimeter
G1 X99.161 Y96.288 E0.01797 ; perimeter
G1 X99.072 Y96.299 E0.00414 ; perimeter
G1 X98.925 Y96.402 E0.00834 ; perimeter
G1 X98.876 Y96.378 E0.00249 ; perimeter
G1 X98.792 Y96.173 E0.01025 ; perimeter
G1 X98.771 Y96.009 E0.00768 ; perimeter
G1 X98.811 Y95.777 E0.01089 ; perimeter
G1 X98.798 Y95.713 E0.00302 ; perimeter
G1 X98.909 Y95.355 E0.01738 ; perimeter
G1 X98.956 Y95.261 E0.00488 ; perimeter
G1 X99.065 Y95.123 E0.00813 ; perimeter
G1 X99.276 Y94.985 E0.01167 ; perimeter
G1 X99.600 Y94.885 E0.01571 ; perimeter
G1 X99.991 Y94.829 E0.01832 ; perimeter
G1 X100.573 Y94.677 E0.02783 ; perimeter
G1 X100.722 Y94.613 E0.00752 ; perimeter
G1 X100.922 Y94.584 E0.00936 ; perimeter
G1 X102.303 Y94.492 E0.06414 ; perimeter
G1 X102.674 Y94.422 E0.01747 ; perimeter
G1 X103.127 Y94.412 E0.02097 ; perimeter
G1 X103.671 Y94.501 E0.02557 ; perimeter
G1 X103.855 Y94.560 E0.00893 ; perimeter
G1 X104.123 Y94.724 E0.01456 ; perimeter
G1 X104.263 Y94.910 E0.01075 ; perimeter
G1 X104.493 Y95.079 E0.01325 ; perimeter
G1 X104.695 Y95.312 E0.01426 ; perimeter
G1 X104.816 Y95.368 E0.00621 ; perimeter
G1 X105.395 Y95.492 E0.02739 ; perimeter
G1 X105.747 Y95.522 E0.01638 ; perimeter
G1 X106.513 Y95.711 E0.03657 ; perimeter
G1 X106.918 Y95.929 E0.02128 ; perimeter
G1 X107.339 Y96.360 E0.02790 ; perimeter
G1 X107.474 Y96.561 E0.01122 ; perimeter
G1 X107.836 Y96.858 E0.02172 ; perimeter
G1 X108.047 Y96.868 E0.00978 ; perimeter
G1 X108.744 Y97.050 E0.03338 ; perimeter
G1 X108.957 Y97.174 E0.01138 ; perimeter
G1 X109.337 Y97.531 E0.02417 ; perimeter
G1 X109.743 Y98.154 E0.03444 ; perimeter
G1 X109.784 Y98.284 E0.00634 ; perimeter
G1 X109.757 Y98.386 E0.00490 ; perimeter
G1 X109.597 Y98.518 E0.00957 ; perimeter
G1 X109.344 Y98.599 E0.01231 ; perimeter
G1 X108.882 Y98.689 E0.02182 ; perimeter
G1 X108.567 Y98.676 E0.01462 ; perimeter
G1 X108.364 Y98.598 E0.01004 ; perimeter
G1 X108.248 Y98.466 E0.00816 ; perimeter
G1 X108.016 Y98.114 E0.01952 ; perimeter
G1 X107.801 Y97.856 E0.01556 ; perimeter
G1 X107.280 Y97.501 E0.02922 ; perimeter
G1 X106.983 Y97.235 E0.01845 ; perimeter
G1 X106.679 Y96.880 E0.02162 ; perimeter
G1 X106.207 Y96.507 E0.02788 ; perimeter
G1 X105.542 Y96.171 E0.03453 ; perimeter
G1 X105.125 Y95.882 E0.02352 ; perimeter
G1 X105.022 Y95.751 E0.00771 ; perimeter
G1 X104.827 Y95.575 E0.01217 ; perimeter
G1 X104.716 Y95.270 F10800.000 ; move inwards before travel
G1 X105.432 Y95.737 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.256008
G1 F2400.000
G1 X105.725 Y95.874 E0.00573 ; infill
;WIDTH:0.294071
G1 X105.884 Y95.933 E0.00354 ; infill
;WIDTH:0.332135
G1 X106.042 Y95.992 E0.00407 ; infill
;WIDTH:0.371594
G1 X106.360 Y96.110 E0.00925 ; infill
G1 X106.647 Y96.288 E0.00925 ; infill
G1 X106.981 Y96.591 E0.01230 ; infill
G1 X107.189 Y96.852 E0.00913 ; infill
;WIDTH:0.394206
G1 X107.282 Y96.943 E0.00378 ; infill
;WIDTH:0.408567
G1 X107.523 Y97.149 E0.00966 ; infill
G1 X107.596 Y97.425 E0.00866 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.523 Y97.149 E-0.07513 ; wipe and retract
G1 X107.282 Y96.943 E-0.08385 ; wipe and retract
;WIPE_END
G1 E-2.24103 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 X103.376 Y94.697 ; move to first infill point
G1 Z13.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.191672
G1 F2400.000
G1 X104.028 Y95.137 E0.00974 ; infill
G1 X104.244 Y95.210 E0.00281 ; infill
G1 X104.231 Y95.185 F10800.000 ; move to first infill point
;WIDTH:0.386773
G1 F2400.000
G1 X103.681 Y94.938 E0.01722 ; infill
G1 X103.275 Y94.835 E0.01197 ; infill
;WIDTH:0.353506
G1 X102.718 Y94.838 E0.01440 ; infill
G1 X102.353 Y94.882 E0.00950 ; infill
;WIDTH:0.346073
G1 X102.179 Y94.878 E0.00438 ; infill
;WIDTH:0.314429
G1 X101.782 Y94.890 E0.00896 ; infill
;WIDTH:0.285459
G1 X101.519 Y94.921 E0.00535 ; infill
G1 X100.958 Y94.929 E0.01131 ; infill
;WIDTH:0.255657
G1 X100.516 Y94.941 E0.00784 ; infill
G1 X99.360 Y95.218 F10800.000 ; move to first infill point
;WIDTH:0.376793
G1 F2400.000
G1 X99.209 Y95.766 E0.01578 ; infill
;WIDTH:0.349522
G1 X99.049 Y96.059 E0.00849 ; infill
G1 X99.076 Y96.052 F10800.000 ; move to first infill point
;WIDTH:0.475303
G1 F2400.000
G1 X99.345 Y95.508 E0.02182 ; infill
G1 X99.747 Y95.107 E0.02043 ; infill
G1 X100.016 Y95.138 F10800.000 ; move to first infill point
;WIDTH:0.308434
G1 F2400.000
G1 X99.621 Y95.277 E0.00925 ; infill
G1 X99.092 Y95.579 E0.01344 ; infill
;LAYER_CHANGE
;Z:13.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;13.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.621 Y95.277 E-0.16066 ; wipe and retract
G1 X100.016 Y95.138 E-0.11058 ; wipe and retract
;WIPE_END
G1 E-2.12877 F2400.000 ; retract
G1 Z13.275 F10800.000 ; lift Z
G1 Z13.400 ; move to next layer (66)
;AFTER_LAYER_CHANGE
;13.4
G1 Z13.475 ; lift Z
G1 X110.486 Y100.956 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.505 Y101.002 E0.00171 ; perimeter
G1 X111.859 Y102.235 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X112.098 Y102.282 E0.00824 ; perimeter
G1 X111.960 Y102.284 E0.00467 ; perimeter
G1 X111.913 Y102.261 E0.00177 ; perimeter
G1 X113.107 Y102.599 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.696 Y102.583 E0.01908 ; perimeter
G1 X112.227 Y102.762 E0.02324 ; perimeter
G1 X111.842 Y102.762 E0.01784 ; perimeter
G1 X111.545 Y102.618 E0.01528 ; perimeter
G1 X111.200 Y102.293 E0.02197 ; perimeter
G1 X110.849 Y101.903 E0.02429 ; perimeter
G1 X110.731 Y101.799 E0.00729 ; perimeter
G1 X110.522 Y101.665 E0.01149 ; perimeter
G1 X110.187 Y101.376 E0.02053 ; perimeter
G1 X110.026 Y101.178 E0.01182 ; perimeter
G1 X109.990 Y101.038 E0.00667 ; perimeter
G1 X110.011 Y100.864 E0.00812 ; perimeter
G1 X109.989 Y100.550 E0.01458 ; perimeter
G1 X110.025 Y100.480 E0.00368 ; perimeter
G1 X110.213 Y99.757 E0.03460 ; perimeter
G1 X110.192 Y99.585 E0.00800 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.184 Y99.521 E0.00271 ; perimeter (bridge)
G1 X110.255 Y99.312 E0.00921 ; perimeter (bridge)
G1 X110.396 Y99.494 E0.00962 ; perimeter (bridge)
G1 X110.468 Y99.623 E0.00619 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.570 Y99.804 E0.00961 ; perimeter
G1 X110.681 Y100.171 E0.01777 ; perimeter
G1 X110.984 Y100.898 E0.03647 ; perimeter
G1 X111.303 Y101.266 E0.02255 ; perimeter
G1 X111.582 Y101.514 E0.01730 ; perimeter
G1 X111.986 Y101.765 E0.02203 ; perimeter
G1 X112.164 Y101.789 E0.00831 ; perimeter
G1 X112.551 Y101.944 E0.01930 ; perimeter
G1 X112.645 Y102.010 E0.00533 ; perimeter
G1 X112.859 Y102.100 E0.01079 ; perimeter
G1 X113.012 Y102.227 E0.00920 ; perimeter
G1 X113.308 Y102.223 E0.01373 ; perimeter
G1 X113.683 Y102.267 E0.01746 ; perimeter
G1 X113.955 Y102.366 E0.01340 ; perimeter
G1 X114.172 Y102.577 E0.01400 ; perimeter
G1 X114.270 Y102.806 E0.01154 ; perimeter
G1 X114.273 Y102.959 E0.00708 ; perimeter
G1 X114.204 Y103.180 E0.01073 ; perimeter
G1 X114.158 Y103.213 E0.00264 ; perimeter
G1 X113.962 Y103.268 E0.00945 ; perimeter
G1 X113.783 Y103.268 E0.00827 ; perimeter
G1 X113.525 Y103.182 E0.01260 ; perimeter
G1 X113.172 Y102.781 E0.02474 ; perimeter
G1 X113.127 Y102.655 E0.00619 ; perimeter
G1 X113.035 Y102.205 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.696 Y102.583 E-0.11544 ; wipe and retract
G1 X112.227 Y102.762 E-0.13240 ; wipe and retract
G1 X111.842 Y102.762 E-0.10163 ; wipe and retract
G1 X111.545 Y102.618 E-0.08705 ; wipe and retract
G1 X111.200 Y102.293 E-0.12518 ; wipe and retract
G1 X110.849 Y101.903 E-0.13838 ; wipe and retract
G1 X110.731 Y101.799 E-0.04153 ; wipe and retract
G1 X110.522 Y101.665 E-0.06547 ; wipe and retract
G1 X110.187 Y101.376 E-0.11697 ; wipe and retract
G1 X110.026 Y101.178 E-0.06732 ; wipe and retract
G1 X109.990 Y101.038 E-0.03802 ; wipe and retract
G1 X110.011 Y100.864 E-0.04628 ; wipe and retract
G1 X109.989 Y100.550 E-0.08305 ; wipe and retract
G1 X110.025 Y100.480 E-0.02096 ; wipe and retract
G1 X110.213 Y99.757 E-0.19710 ; wipe and retract
G1 X110.192 Y99.585 E-0.04560 ; wipe and retract
;WIPE_END
G1 E-0.97764 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X109.322 Y98.127 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.293 Y98.119 E0.00103 ; perimeter
G1 X109.080 Y98.164 E0.00738 ; perimeter
G1 X108.877 Y98.113 E0.00709 ; perimeter
G1 X108.738 Y97.990 E0.00629 ; perimeter
G1 X108.384 Y97.492 E0.02066 ; perimeter
G1 X108.239 Y97.403 E0.00578 ; perimeter
G1 X108.459 Y97.449 E0.00760 ; perimeter
G1 X108.662 Y97.452 E0.00687 ; perimeter
G1 X108.807 Y97.488 E0.00507 ; perimeter
G1 X108.980 Y97.593 E0.00685 ; perimeter
G1 X109.290 Y98.077 E0.01944 ; perimeter
G1 X107.780 Y96.870 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.058 Y96.931 E0.01317 ; perimeter
G1 X108.305 Y96.916 E0.01145 ; perimeter
G1 X108.520 Y96.968 E0.01026 ; perimeter
G1 X108.724 Y96.971 E0.00945 ; perimeter
G1 X108.994 Y97.038 E0.01288 ; perimeter
G1 X109.306 Y97.227 E0.01690 ; perimeter
G1 X109.482 Y97.454 E0.01330 ; perimeter
G1 X109.506 Y97.524 E0.00346 ; perimeter
G1 X109.991 Y98.256 E0.04067 ; perimeter
G1 X110.064 Y98.499 E0.01175 ; perimeter
G1 X109.992 Y98.747 E0.01197 ; perimeter
G1 X109.838 Y98.765 E0.00719 ; perimeter
G1 X109.573 Y98.641 E0.01355 ; perimeter
G1 X109.470 Y98.672 E0.00495 ; perimeter
G1 X109.275 Y98.616 E0.00942 ; perimeter
G1 X109.071 Y98.659 E0.00969 ; perimeter
G1 X108.645 Y98.551 E0.02035 ; perimeter
G1 X108.377 Y98.314 E0.01658 ; perimeter
G1 X108.048 Y97.851 E0.02628 ; perimeter
G1 X107.759 Y97.673 E0.01575 ; perimeter
G1 X107.123 Y97.226 E0.03598 ; perimeter
G1 X106.583 Y96.745 E0.03349 ; perimeter
G1 X106.363 Y96.576 E0.01288 ; perimeter
G1 X106.045 Y96.402 E0.01677 ; perimeter
G1 X105.568 Y96.041 E0.02772 ; perimeter
G1 X105.440 Y95.833 E0.01132 ; perimeter
G1 X105.461 Y95.723 E0.00515 ; perimeter
G1 X105.561 Y95.727 E0.00465 ; perimeter
G1 X105.978 Y95.651 E0.01962 ; perimeter
G1 X106.413 Y95.699 E0.02026 ; perimeter
G1 X106.871 Y95.830 E0.02207 ; perimeter
G1 X107.049 Y95.939 E0.00966 ; perimeter
G1 X107.170 Y96.055 E0.00780 ; perimeter
G1 X107.205 Y96.119 E0.00336 ; perimeter
G1 X107.297 Y96.212 E0.00607 ; perimeter
G1 X107.383 Y96.390 E0.00915 ; perimeter
G1 X107.551 Y96.642 E0.01403 ; perimeter
G1 X107.738 Y96.828 E0.01220 ; perimeter
G1 X107.805 Y97.153 F10800.000 ; move inwards before travel
G1 X107.263 Y96.864 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.229075
G1 F2400.000
G1 X107.597 Y97.154 E0.00685 ; infill
G1 X107.991 Y97.399 E0.00719 ; infill
G1 X107.263 Y96.864 F10800.000 ; move to first infill point
;WIDTH:0.331253
G1 F2400.000
G1 X106.977 Y96.526 E0.01060 ; infill
;WIDTH:0.439251
G1 X106.766 Y96.305 E0.01006 ; infill
G1 X106.588 Y96.202 E0.00677 ; infill
;WIDTH:0.431971
G1 X106.475 Y96.156 E0.00398 ; infill
;WIDTH:0.4048
G1 X106.361 Y96.109 E0.00370 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.475 Y96.156 E-0.03247 ; wipe and retract
;WIPE_END
G1 E-2.36753 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X110.499 Y101.327 ; move to first infill point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.340051
G1 F2400.000
G1 X110.794 Y101.331 E0.00728 ; infill
G1 X111.130 Y101.632 E0.01115 ; infill
;WIDTH:0.3764
G1 X111.349 Y101.849 E0.00856 ; infill
;WIDTH:0.401629
G1 X111.418 Y101.907 E0.00269 ; infill
;WIDTH:0.426858
G1 X111.488 Y101.965 E0.00288 ; infill
G1 X111.564 Y102.305 E0.01111 ; infill
G1 X113.399 Y102.477 F10800.000 ; move to first infill point
;WIDTH:0.387071
G1 F2400.000
G1 X114.023 Y102.980 E0.02295 ; infill
G1 X114.016 Y102.999 F10800.000 ; move to first infill point
;WIDTH:0.191956
G1 F2400.000
G1 X113.978 Y102.966 E0.00063 ; infill
;WIDTH:0.226057
G1 X113.940 Y102.932 E0.00077 ; infill
;WIDTH:0.234676
G1 X113.936 Y102.929 E0.00009 ; infill
;WIDTH:0.257086
G1 X113.352 Y102.471 E0.01321 ; infill
G1 X113.328 Y102.500 F10800.000 ; move to first infill point
;WIDTH:0.399786
G1 F2400.000
G1 X114.031 Y102.922 E0.02434 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.328 Y102.500 E-0.21648 ; wipe and retract
;WIPE_END
G1 E-2.18352 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X104.299 Y95.276 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.141 Y95.354 E0.00817 ; perimeter
G1 X103.814 Y95.352 E0.01514 ; perimeter
G1 X103.353 Y95.249 E0.02185 ; perimeter
G1 X102.672 Y95.205 E0.03161 ; perimeter
G1 X102.560 Y95.215 E0.00522 ; perimeter
G1 X101.955 Y95.151 E0.02819 ; perimeter
G1 X101.379 Y95.258 E0.02711 ; perimeter
G1 X100.940 Y95.275 E0.02034 ; perimeter
G1 X100.815 Y95.301 E0.00591 ; perimeter
G1 X100.534 Y95.292 E0.01302 ; perimeter
G1 X100.296 Y95.342 E0.01128 ; perimeter
G1 X99.795 Y95.639 E0.02697 ; perimeter
G1 X99.619 Y95.889 E0.01417 ; perimeter
G1 X99.507 Y96.006 E0.00750 ; perimeter
G1 X99.425 Y96.148 E0.00763 ; perimeter
G1 X99.303 Y96.238 E0.00698 ; perimeter
G1 X99.168 Y96.493 E0.01337 ; perimeter
G1 X99.062 Y96.556 E0.00570 ; perimeter
G1 X99.064 Y96.739 E0.00848 ; perimeter
G1 X98.965 Y97.053 E0.01526 ; perimeter
G1 X99.033 Y97.480 E0.02005 ; perimeter
G1 X99.110 Y97.591 E0.00625 ; perimeter
G1 X99.277 Y98.283 E0.03296 ; perimeter
G1 X99.303 Y98.840 E0.02582 ; perimeter
G1 X99.268 Y99.202 E0.01687 ; perimeter
G1 X99.162 Y99.546 E0.01664 ; perimeter
G1 X99.052 Y99.702 E0.00887 ; perimeter
G1 X98.952 Y99.740 E0.00498 ; perimeter
G1 X98.752 Y99.686 E0.00960 ; perimeter
G1 X98.664 Y99.601 E0.00565 ; perimeter
G1 X98.579 Y99.388 E0.01063 ; perimeter
G1 X98.466 Y98.597 E0.03700 ; perimeter
G1 X98.458 Y98.033 E0.02614 ; perimeter
G1 X98.500 Y97.686 E0.01618 ; perimeter
G1 X98.659 Y97.188 E0.02421 ; perimeter
G1 X98.677 Y96.970 E0.01015 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.688 Y96.846 E0.00521 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.668 Y96.678 E0.00782 ; perimeter
G1 X98.667 Y96.169 E0.02359 ; perimeter
G1 X98.732 Y95.840 E0.01552 ; perimeter
G1 X98.848 Y95.484 E0.01735 ; perimeter
G1 X99.003 Y95.184 E0.01564 ; perimeter
G1 X99.170 Y95.044 E0.01013 ; perimeter
G1 X99.389 Y94.893 E0.01232 ; perimeter
G1 X99.744 Y94.776 E0.01729 ; perimeter
G1 X100.382 Y94.624 E0.03038 ; perimeter
G1 X100.738 Y94.571 E0.01668 ; perimeter
G1 X101.016 Y94.557 E0.01289 ; perimeter
G1 X101.251 Y94.568 E0.01090 ; perimeter
G1 X101.526 Y94.620 E0.01299 ; perimeter
G1 X102.230 Y94.608 E0.03261 ; perimeter
G1 X102.680 Y94.446 E0.02211 ; perimeter
G1 X102.824 Y94.423 E0.00678 ; perimeter
G1 X102.906 Y94.380 E0.00429 ; perimeter
G1 X103.186 Y94.374 E0.01295 ; perimeter
G1 X103.716 Y94.471 E0.02495 ; perimeter
G1 X103.970 Y94.632 E0.01395 ; perimeter
G1 X104.077 Y94.743 E0.00713 ; perimeter
G1 X104.248 Y94.999 E0.01427 ; perimeter
G1 X104.299 Y95.220 E0.01050 ; perimeter
G1 X104.123 Y95.261 F10800.000 ; move inwards before travel
G1 X104.024 Y95.098 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.320464
G1 F2400.000
G1 X103.728 Y94.930 E0.00787 ; infill
G1 X103.555 Y94.862 E0.00428 ; infill
G1 X103.394 Y94.831 E0.00377 ; infill
;WIDTH:0.421248
G1 X103.014 Y94.802 E0.01199 ; infill
;WIDTH:0.408876
G1 X102.981 Y94.809 E0.00104 ; infill
;WIDTH:0.390534
G1 X102.926 Y94.816 E0.00158 ; infill
;WIDTH:0.369513
G1 X102.237 Y94.849 E0.01874 ; infill
G1 X102.291 Y94.894 F10800.000 ; move to first infill point
;WIDTH:0.141727
G1 F2400.000
G1 X101.948 Y94.881 E0.00282 ; infill
;WIDTH:0.0977809
G1 X101.494 Y94.925 E0.00208 ; infill
;WIDTH:0.201079
G1 X101.016 Y94.915 E0.00629 ; infill
G1 X100.516 Y94.950 E0.00659 ; infill
G1 X100.187 Y95.019 E0.00442 ; infill
G1 X100.004 Y95.090 E0.00259 ; infill
;WIDTH:0.34218
G1 X99.579 Y95.275 E0.01152 ; infill
G1 X99.435 Y95.392 E0.00461 ; infill
;WIDTH:0.462145
G1 X99.362 Y95.471 E0.00377 ; infill
G1 X99.278 Y95.609 E0.00561 ; infill
;WIDTH:0.44053
G1 X98.926 Y96.102 E0.02003 ; infill
G1 X98.912 Y96.364 F10800.000 ; move to first infill point
;WIDTH:0.364622
G1 F2400.000
G1 X99.174 Y95.779 E0.01715 ; infill
;WIDTH:0.377543
G1 X99.527 Y95.101 E0.02126 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.174 Y95.779 E-0.20164 ; wipe and retract
;WIPE_END
G1 E-2.19836 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X98.822 Y97.599 ; move to first infill point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.20831
G1 F2400.000
G1 X98.817 Y97.756 E0.00216 ; infill
;WIDTH:0.244415
G1 X98.823 Y97.855 E0.00166 ; infill
;WIDTH:0.28052
G1 X98.830 Y97.954 E0.00196 ; infill
;WIDTH:0.316625
G1 X98.836 Y98.053 E0.00226 ; infill
;WIDTH:0.324052
G1 X98.902 Y98.827 E0.01815 ; infill
G1 X98.918 Y99.475 E0.01516 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.902 Y98.827 E-0.17110 ; wipe and retract
G1 X98.836 Y98.053 E-0.20485 ; wipe and retract
;WIPE_END
G1 E-2.02404 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X100.788 Y103.139 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.947 Y103.128 E0.00740 ; perimeter
G1 X101.146 Y103.168 E0.00941 ; perimeter
G1 X101.276 Y103.241 E0.00688 ; perimeter
G1 X101.486 Y103.529 E0.01650 ; perimeter
G1 X101.634 Y103.858 E0.01671 ; perimeter
G1 X101.642 Y103.943 E0.00395 ; perimeter
G1 X101.608 Y104.226 E0.01321 ; perimeter
G1 X101.477 Y104.280 E0.00655 ; perimeter
G1 X101.410 Y104.231 E0.00385 ; perimeter
G1 X101.153 Y104.237 E0.01191 ; perimeter
G1 X100.977 Y104.127 E0.00961 ; perimeter
G1 X100.867 Y104.086 E0.00545 ; perimeter
G1 X100.764 Y103.996 E0.00632 ; perimeter
G1 X100.635 Y103.750 E0.01288 ; perimeter
G1 X100.631 Y103.577 E0.00803 ; perimeter
G1 X100.744 Y103.293 E0.01417 ; perimeter
G1 X100.754 Y103.189 E0.00484 ; perimeter
G1 X100.921 Y103.228 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.947 Y103.128 E-0.05354 ; wipe and retract
G1 X101.146 Y103.168 E-0.05363 ; wipe and retract
G1 X101.276 Y103.241 E-0.03922 ; wipe and retract
G1 X101.486 Y103.529 E-0.09402 ; wipe and retract
G1 X101.634 Y103.858 E-0.09518 ; wipe and retract
G1 X101.642 Y103.943 E-0.02249 ; wipe and retract
G1 X101.608 Y104.226 E-0.07524 ; wipe and retract
G1 X101.477 Y104.280 E-0.03731 ; wipe and retract
G1 X101.410 Y104.231 E-0.02192 ; wipe and retract
G1 X101.153 Y104.237 E-0.06784 ; wipe and retract
G1 X100.977 Y104.127 E-0.05472 ; wipe and retract
G1 X100.867 Y104.086 E-0.03105 ; wipe and retract
G1 X100.764 Y103.996 E-0.03599 ; wipe and retract
G1 X100.635 Y103.750 E-0.07336 ; wipe and retract
G1 X100.631 Y103.577 E-0.04573 ; wipe and retract
G1 X100.744 Y103.293 E-0.08072 ; wipe and retract
G1 X100.754 Y103.189 E-0.02760 ; wipe and retract
;WIPE_END
G1 E-1.49045 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X104.314 Y106.283 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.581 Y106.190 E0.01307 ; perimeter
G1 X104.740 Y106.192 E0.00738 ; perimeter
G1 X104.956 Y106.253 E0.01040 ; perimeter
G1 X105.150 Y106.381 E0.01074 ; perimeter
G1 X105.287 Y106.531 E0.00943 ; perimeter
G1 X105.368 Y106.691 E0.00829 ; perimeter
G1 X105.387 Y106.875 E0.00858 ; perimeter
G1 X105.331 Y107.051 E0.00856 ; perimeter
G1 X105.068 Y107.162 E0.01322 ; perimeter
G1 X104.724 Y107.074 E0.01645 ; perimeter
G1 X104.566 Y106.978 E0.00856 ; perimeter
G1 X104.324 Y106.759 E0.01509 ; perimeter
G1 X104.304 Y106.714 E0.00230 ; perimeter
G1 X104.269 Y106.394 E0.01491 ; perimeter
G1 X104.289 Y106.336 E0.00282 ; perimeter
G1 X104.583 Y106.368 F10800.000 ; move inwards before travel
G1 X105.136 Y106.867 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.360265
G1 F2400.000
G1 X104.813 Y106.646 E0.01032 ; infill
G1 X104.570 Y106.448 E0.00826 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.813 Y106.646 E-0.08257 ; wipe and retract
G1 X105.136 Y106.867 E-0.10324 ; wipe and retract
;WIPE_END
G1 E-2.21419 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X106.372 Y107.894 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.490 Y107.779 E0.00765 ; perimeter
G1 X106.569 Y107.752 E0.00383 ; perimeter
G1 X106.762 Y107.802 E0.00924 ; perimeter
G1 X106.841 Y107.799 E0.00368 ; perimeter
G1 X107.094 Y107.902 E0.01264 ; perimeter
G1 X107.219 Y108.007 E0.00757 ; perimeter
G1 X107.302 Y108.142 E0.00732 ; perimeter
G1 X107.343 Y108.274 E0.00642 ; perimeter
G1 X107.308 Y108.535 E0.01219 ; perimeter
G1 X107.199 Y108.667 E0.00795 ; perimeter
G1 X106.985 Y108.729 E0.01029 ; perimeter
G1 X106.672 Y108.619 E0.01540 ; perimeter
G1 X106.497 Y108.464 E0.01083 ; perimeter
G1 X106.385 Y108.214 E0.01265 ; perimeter
G1 X106.345 Y108.041 E0.00824 ; perimeter
G1 X106.362 Y107.953 E0.00414 ; perimeter
G1 X106.537 Y107.893 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.490 Y107.779 E-0.05710 ; wipe and retract
G1 X106.569 Y107.752 E-0.02181 ; wipe and retract
G1 X106.762 Y107.802 E-0.05265 ; wipe and retract
G1 X106.841 Y107.799 E-0.02097 ; wipe and retract
G1 X107.094 Y107.902 E-0.07202 ; wipe and retract
G1 X107.219 Y108.007 E-0.04313 ; wipe and retract
G1 X107.302 Y108.142 E-0.04170 ; wipe and retract
G1 X107.343 Y108.274 E-0.03655 ; wipe and retract
G1 X107.308 Y108.535 E-0.06943 ; wipe and retract
G1 X107.199 Y108.667 E-0.04531 ; wipe and retract
G1 X106.985 Y108.729 E-0.05860 ; wipe and retract
G1 X106.672 Y108.619 E-0.08771 ; wipe and retract
G1 X106.497 Y108.464 E-0.06170 ; wipe and retract
G1 X106.385 Y108.214 E-0.07209 ; wipe and retract
G1 X106.345 Y108.041 E-0.04692 ; wipe and retract
G1 X106.362 Y107.953 E-0.02360 ; wipe and retract
;WIPE_END
G1 E-1.58871 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X108.263 Y112.445 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.443 Y112.441 E0.00831 ; perimeter
G1 X108.628 Y112.501 E0.00903 ; perimeter
G1 X108.833 Y112.645 E0.01159 ; perimeter
G1 X109.055 Y112.900 E0.01567 ; perimeter
G1 X109.157 Y113.108 E0.01074 ; perimeter
G1 X109.219 Y113.371 E0.01249 ; perimeter
G1 X109.201 Y113.571 E0.00931 ; perimeter
G1 X109.110 Y113.668 E0.00616 ; perimeter
G1 X108.982 Y113.673 E0.00594 ; perimeter
G1 X108.762 Y113.609 E0.01061 ; perimeter
G1 X108.519 Y113.463 E0.01313 ; perimeter
G1 X108.285 Y113.206 E0.01610 ; perimeter
G1 X108.153 Y112.967 E0.01263 ; perimeter
G1 X108.101 Y112.658 E0.01455 ; perimeter
G1 X108.158 Y112.507 E0.00745 ; perimeter
G1 X108.211 Y112.476 E0.00289 ; perimeter
G1 X108.397 Y112.565 F10800.000 ; move inwards before travel
G1 X108.393 Y112.684 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.278385
G1 F2400.000
G1 X108.823 Y113.364 E0.01576 ; infill
G1 X108.368 Y112.794 F10800.000 ; move to first infill point
;WIDTH:0.151959
G1 F2400.000
G1 X108.972 Y113.410 E0.00782 ; infill
G1 X108.925 Y113.405 F10800.000 ; move to first infill point
;WIDTH:0.337248
G1 F2400.000
G1 X108.399 Y112.683 E0.02186 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.925 Y113.405 E-0.23566 ; wipe and retract
;WIPE_END
G1 E-2.16434 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X111.267 Y115.443 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.507 Y115.394 E0.01135 ; perimeter
G1 X111.740 Y115.409 E0.01083 ; perimeter
G1 X111.894 Y115.501 E0.00831 ; perimeter
G1 X111.973 Y115.704 E0.01005 ; perimeter
G1 X111.947 Y115.942 E0.01111 ; perimeter
G1 X111.906 Y116.013 E0.00380 ; perimeter
G1 X111.819 Y116.093 E0.00547 ; perimeter
G1 X111.723 Y116.126 E0.00470 ; perimeter
G1 X111.491 Y116.135 E0.01075 ; perimeter
G1 X111.309 Y116.069 E0.00896 ; perimeter
G1 X111.188 Y115.930 E0.00856 ; perimeter
G1 X111.148 Y115.668 E0.01227 ; perimeter
G1 X111.190 Y115.526 E0.00685 ; perimeter
G1 X111.226 Y115.487 E0.00243 ; perimeter
G1 X111.476 Y115.571 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.507 Y115.394 E-0.07809 ; wipe and retract
G1 X111.740 Y115.409 E-0.06170 ; wipe and retract
G1 X111.894 Y115.501 E-0.04734 ; wipe and retract
G1 X111.973 Y115.704 E-0.05728 ; wipe and retract
G1 X111.947 Y115.942 E-0.06328 ; wipe and retract
G1 X111.906 Y116.013 E-0.02163 ; wipe and retract
G1 X111.819 Y116.093 E-0.03116 ; wipe and retract
G1 X111.723 Y116.126 E-0.02676 ; wipe and retract
G1 X111.491 Y116.135 E-0.06124 ; wipe and retract
G1 X111.309 Y116.069 E-0.05106 ; wipe and retract
G1 X111.188 Y115.930 E-0.04877 ; wipe and retract
G1 X111.148 Y115.668 E-0.06991 ; wipe and retract
G1 X111.190 Y115.526 E-0.03905 ; wipe and retract
G1 X111.226 Y115.487 E-0.01387 ; wipe and retract
;WIPE_END
G1 E-1.72884 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X114.315 Y115.540 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.351 Y115.398 E0.00679 ; perimeter
G1 X114.504 Y115.199 E0.01160 ; perimeter
G1 X115.124 Y114.659 E0.03811 ; perimeter
G1 X115.339 Y114.585 E0.01053 ; perimeter
G1 X115.431 Y114.588 E0.00424 ; perimeter
G1 X115.640 Y114.704 E0.01109 ; perimeter
G1 X115.736 Y114.867 E0.00875 ; perimeter
G1 X115.758 Y115.028 E0.00753 ; perimeter
G1 X115.712 Y115.171 E0.00697 ; perimeter
G1 X115.597 Y115.323 E0.00884 ; perimeter
G1 X115.243 Y115.636 E0.02186 ; perimeter
G1 X115.097 Y115.795 E0.01001 ; perimeter
G1 X114.885 Y115.950 E0.01220 ; perimeter
G1 X114.728 Y116.001 E0.00764 ; perimeter
G1 X114.616 Y115.992 E0.00516 ; perimeter
G1 X114.414 Y115.854 E0.01132 ; perimeter
G1 X114.326 Y115.687 E0.00874 ; perimeter
G1 X114.320 Y115.600 E0.00407 ; perimeter
G1 X114.447 Y115.475 F10800.000 ; move inwards before travel
G1 X115.356 Y114.993 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.363311
G1 F2400.000
G1 X114.720 Y115.574 E0.02295 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.356 Y114.993 E-0.22737 ; wipe and retract
;WIPE_END
G1 E-2.17263 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X115.416 Y112.530 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.326 Y112.491 E0.00453 ; perimeter
G1 X115.233 Y112.384 E0.00661 ; perimeter
G1 X115.162 Y112.155 E0.01108 ; perimeter
G1 X115.169 Y111.953 E0.00938 ; perimeter
G1 X115.232 Y111.801 E0.00762 ; perimeter
G1 X115.296 Y111.719 E0.00481 ; perimeter
G1 X115.410 Y111.663 E0.00586 ; perimeter
G1 X115.546 Y111.650 E0.00634 ; perimeter
G1 X115.677 Y111.683 E0.00627 ; perimeter
G1 X115.802 Y111.797 E0.00782 ; perimeter
G1 X115.877 Y112.006 E0.01032 ; perimeter
G1 X115.876 Y112.182 E0.00814 ; perimeter
G1 X115.797 Y112.395 E0.01052 ; perimeter
G1 X115.685 Y112.499 E0.00707 ; perimeter
G1 X115.560 Y112.536 E0.00603 ; perimeter
G1 X115.476 Y112.532 E0.00391 ; perimeter
G1 X115.388 Y112.436 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.326 Y112.491 E-0.04098 ; wipe and retract
G1 X115.233 Y112.384 E-0.03765 ; wipe and retract
G1 X115.162 Y112.155 E-0.06314 ; wipe and retract
G1 X115.169 Y111.953 E-0.05344 ; wipe and retract
G1 X115.232 Y111.801 E-0.04342 ; wipe and retract
G1 X115.296 Y111.719 E-0.02738 ; wipe and retract
G1 X115.410 Y111.663 E-0.03339 ; wipe and retract
G1 X115.546 Y111.650 E-0.03613 ; wipe and retract
G1 X115.677 Y111.683 E-0.03573 ; wipe and retract
G1 X115.802 Y111.797 E-0.04454 ; wipe and retract
G1 X115.877 Y112.006 E-0.05878 ; wipe and retract
G1 X115.876 Y112.182 E-0.04637 ; wipe and retract
G1 X115.797 Y112.395 E-0.05996 ; wipe and retract
G1 X115.685 Y112.499 E-0.04029 ; wipe and retract
G1 X115.560 Y112.536 E-0.03436 ; wipe and retract
G1 X115.476 Y112.532 E-0.02225 ; wipe and retract
;WIPE_END
G1 E-1.72220 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 X115.409 Y105.862 ; move to first perimeter point
G1 Z13.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.271 Y105.797 E0.00709 ; perimeter
G1 X115.152 Y105.596 E0.01082 ; perimeter
G1 X115.137 Y105.481 E0.00536 ; perimeter
G1 X115.154 Y105.325 E0.00728 ; perimeter
G1 X115.220 Y105.185 E0.00714 ; perimeter
G1 X115.275 Y105.134 E0.00350 ; perimeter
G1 X115.415 Y105.071 E0.00709 ; perimeter
G1 X115.510 Y105.064 E0.00444 ; perimeter
G1 X115.641 Y105.087 E0.00618 ; perimeter
G1 X115.780 Y105.164 E0.00735 ; perimeter
G1 X115.835 Y105.224 E0.00375 ; perimeter
G1 X115.883 Y105.341 E0.00588 ; perimeter
G1 X115.893 Y105.475 E0.00623 ; perimeter
G1 X115.875 Y105.623 E0.00691 ; perimeter
G1 X115.829 Y105.719 E0.00493 ; perimeter
G1 X115.697 Y105.830 E0.00797 ; perimeter
G1 X115.527 Y105.878 E0.00821 ; perimeter
G1 X115.469 Y105.870 E0.00271 ; perimeter
G1 X115.369 Y105.715 F10800.000 ; move inwards before travel
G1 X115.516 Y105.445 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311544
G1 F2400.000
G1 X115.521 Y105.499 E0.00121 ; infill
;LAYER_CHANGE
;Z:13.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;13.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.516 Y105.445 E-0.01433 ; wipe and retract
;WIPE_END
G1 E-2.38567 F2400.000 ; retract
G1 Z13.475 F10800.000 ; lift Z
G1 Z13.600 ; move to next layer (67)
;AFTER_LAYER_CHANGE
;13.6
G1 Z13.675 ; lift Z
G1 X109.491 Y98.207 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.139 Y98.107 E0.01239 ; perimeter
G1 X108.951 Y97.927 E0.00881 ; perimeter
G1 X108.607 Y97.477 E0.01917 ; perimeter
G1 X108.552 Y97.439 E0.00224 ; perimeter
G1 X108.877 Y97.439 E0.01098 ; perimeter
G1 X109.062 Y97.477 E0.00639 ; perimeter
G1 X109.129 Y97.518 E0.00266 ; perimeter
G1 X109.465 Y98.153 E0.02433 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.139 Y98.107 E-0.08677 ; wipe and retract
G1 X108.951 Y97.927 E-0.06871 ; wipe and retract
G1 X108.607 Y97.477 E-0.14948 ; wipe and retract
G1 X108.552 Y97.439 E-0.01749 ; wipe and retract
G1 X108.877 Y97.439 E-0.08564 ; wipe and retract
G1 X109.062 Y97.477 E-0.04982 ; wipe and retract
G1 X109.129 Y97.518 E-0.02076 ; wipe and retract
G1 X109.465 Y98.153 E-0.18965 ; wipe and retract
;WIPE_END
G1 E-1.73168 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X107.530 Y96.979 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.014 Y96.958 E0.02246 ; perimeter
G1 X108.138 Y96.985 E0.00586 ; perimeter
G1 X108.604 Y96.953 E0.02167 ; perimeter
G1 X108.930 Y96.958 E0.01507 ; perimeter
G1 X109.239 Y97.022 E0.01464 ; perimeter
G1 X109.459 Y97.153 E0.01186 ; perimeter
G1 X109.597 Y97.339 E0.01070 ; perimeter
G1 X109.643 Y97.475 E0.00668 ; perimeter
G1 X109.740 Y97.620 E0.00806 ; perimeter
G1 X109.894 Y97.934 E0.01621 ; perimeter
G1 X110.065 Y98.115 E0.01151 ; perimeter
G1 X110.142 Y98.238 E0.00673 ; perimeter
G1 X110.232 Y98.334 E0.00609 ; perimeter
G1 X110.296 Y98.549 E0.01041 ; perimeter
G1 X110.556 Y99.175 E0.03141 ; perimeter
G1 X110.618 Y99.513 E0.01591 ; perimeter
G1 X110.750 Y99.970 E0.02201 ; perimeter
G1 X110.808 Y100.362 E0.01835 ; perimeter
G1 X110.894 Y100.577 E0.01075 ; perimeter
G1 X110.954 Y100.812 E0.01122 ; perimeter
G1 X111.088 Y101.018 E0.01136 ; perimeter
G1 X111.367 Y101.349 E0.02008 ; perimeter
G1 X111.550 Y101.503 E0.01110 ; perimeter
G1 X111.956 Y101.756 E0.02216 ; perimeter
G1 X112.352 Y101.793 E0.01842 ; perimeter
G1 X112.625 Y101.841 E0.01283 ; perimeter
G1 X112.935 Y101.977 E0.01569 ; perimeter
G1 X113.024 Y101.987 E0.00416 ; perimeter
G1 X113.463 Y102.133 E0.02142 ; perimeter
G1 X113.648 Y102.144 E0.00862 ; perimeter
G1 X113.893 Y102.266 E0.01265 ; perimeter
G1 X114.048 Y102.412 E0.00987 ; perimeter
G1 X114.158 Y102.620 E0.01092 ; perimeter
G1 X114.160 Y102.689 E0.00317 ; perimeter
G1 X114.196 Y102.774 E0.00430 ; perimeter
G1 X114.145 Y103.026 E0.01191 ; perimeter
G1 X114.058 Y103.121 E0.00595 ; perimeter
G1 X113.933 Y103.162 E0.00610 ; perimeter
G1 X113.771 Y103.157 E0.00753 ; perimeter
G1 X113.612 Y103.105 E0.00776 ; perimeter
G1 X113.553 Y103.049 E0.00373 ; perimeter
G1 X113.194 Y102.816 E0.01984 ; perimeter
G1 X113.060 Y102.684 E0.00872 ; perimeter
G1 X112.559 Y102.621 E0.02339 ; perimeter
G1 X112.308 Y102.708 E0.01232 ; perimeter
G1 X111.899 Y102.687 E0.01896 ; perimeter
G1 X111.557 Y102.546 E0.01715 ; perimeter
G1 X111.116 Y102.145 E0.02760 ; perimeter
G1 X110.787 Y101.794 E0.02229 ; perimeter
G1 X110.666 Y101.725 E0.00645 ; perimeter
G1 X110.222 Y101.331 E0.02751 ; perimeter
G1 X110.085 Y101.140 E0.01089 ; perimeter
G1 X110.019 Y100.948 E0.00941 ; perimeter
G1 X109.990 Y100.401 E0.02536 ; perimeter
G1 X110.053 Y99.733 E0.03106 ; perimeter
G1 X110.008 Y99.219 E0.02394 ; perimeter
G1 X109.812 Y98.894 E0.01757 ; perimeter
G1 X109.317 Y98.659 E0.02536 ; perimeter
G1 X108.891 Y98.538 E0.02050 ; perimeter
G1 X108.591 Y98.248 E0.01934 ; perimeter
G1 X108.271 Y97.831 E0.02434 ; perimeter
G1 X107.673 Y97.423 E0.03354 ; perimeter
G1 X107.383 Y97.158 E0.01819 ; perimeter
G1 X107.132 Y97.064 E0.01245 ; perimeter
G1 X106.069 Y96.297 E0.06071 ; perimeter
G1 X105.925 Y96.154 E0.00938 ; perimeter
G1 X105.867 Y96.062 E0.00505 ; perimeter
G1 X105.811 Y95.901 E0.00789 ; perimeter
G1 X105.972 Y95.803 E0.00876 ; perimeter
G1 X106.125 Y95.775 E0.00719 ; perimeter
G1 X106.268 Y95.792 E0.00667 ; perimeter
G1 X106.582 Y95.736 E0.01480 ; perimeter
G1 X106.976 Y95.829 E0.01875 ; perimeter
G1 X107.182 Y95.953 E0.01112 ; perimeter
G1 X107.242 Y96.011 E0.00386 ; perimeter
G1 X107.390 Y96.284 E0.01441 ; perimeter
G1 X107.403 Y96.398 E0.00533 ; perimeter
G1 X107.575 Y96.676 E0.01511 ; perimeter
G1 X107.539 Y96.919 E0.01140 ; perimeter
G1 X107.570 Y97.377 F10800.000 ; move inwards before travel
G1 X107.285 Y96.864 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352273
G1 F2400.000
G1 X106.651 Y95.989 E0.02779 ; infill
G1 X106.283 Y96.034 F10800.000 ; move to first infill point
;WIDTH:0.408044
G1 F2400.000
G1 X106.615 Y96.168 E0.01087 ; infill
;WIDTH:0.442729
G1 X106.704 Y96.211 E0.00329 ; infill
;WIDTH:0.477414
G1 X106.793 Y96.254 E0.00357 ; infill
;WIDTH:0.48603
G1 X107.195 Y96.519 E0.01774 ; infill
G1 X107.850 Y97.206 F10800.000 ; move to first infill point
;WIDTH:0.221153
G1 F2400.000
G1 X108.101 Y97.315 E0.00406 ; infill
;WIDTH:0.235402
G1 X108.316 Y97.390 E0.00364 ; infill
G1 X109.721 Y98.318 F10800.000 ; move to first infill point
;WIDTH:0.125709
G1 F2400.000
G1 X110.029 Y98.678 E0.00326 ; infill
G1 X110.215 Y99.047 E0.00285 ; infill
G1 X110.268 Y99.170 F10800.000 ; move to first infill point
;WIDTH:0.114942
G1 F2400.000
G1 X110.362 Y99.739 E0.00345 ; infill
;WIDTH:0.215086
G1 X110.393 Y100.048 E0.00444 ; infill
;WIDTH:0.337102
G1 X110.411 Y100.489 E0.01081 ; infill
;WIDTH:0.430974
G1 X110.503 Y100.924 E0.01434 ; infill
G1 X110.561 Y101.032 E0.00399 ; infill
G1 X110.748 Y101.256 E0.00940 ; infill
;WIDTH:0.389294
G1 X110.891 Y101.398 E0.00581 ; infill
;WIDTH:0.352276
G1 X110.946 Y101.444 E0.00185 ; infill
;WIDTH:0.327036
G1 X111.002 Y101.490 E0.00170 ; infill
;WIDTH:0.301795
G1 X111.029 Y101.517 E0.00082 ; infill
;WIDTH:0.293994
G1 X111.391 Y101.866 E0.01050 ; infill
;WIDTH:0.387546
G1 X111.775 Y102.156 E0.01378 ; infill
G1 X111.868 Y102.198 E0.00294 ; infill
;WIDTH:0.492668
G1 X112.002 Y102.229 E0.00514 ; infill
G1 X112.240 Y102.245 E0.00890 ; infill
;WIDTH:0.481166
G1 X112.791 Y102.177 E0.02025 ; infill
G1 X112.773 Y102.169 F10800.000 ; move to first infill point
;WIDTH:0.306595
G1 F2400.000
G1 X113.409 Y102.504 E0.01574 ; infill
;WIDTH:0.327472
G1 X113.920 Y102.732 E0.01326 ; infill
G1 X113.916 Y102.678 F10800.000 ; move to first infill point
;WIDTH:0.207396
G1 F2400.000
G1 X113.181 Y102.376 E0.01086 ; infill
G1 X112.691 Y102.269 E0.00686 ; infill
;WIDTH:0.333461
G1 X112.481 Y102.223 E0.00520 ; infill
G1 X112.966 Y102.223 F10800.000 ; move to first infill point
;WIDTH:0.398444
G1 F2400.000
G1 X113.651 Y102.614 E0.02333 ; infill
G1 X113.941 Y102.840 E0.01087 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.651 Y102.614 E-0.09706 ; wipe and retract
G1 X112.966 Y102.223 E-0.20822 ; wipe and retract
;WIPE_END
G1 E-2.09472 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X104.016 Y95.135 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.820 Y95.234 E0.01014 ; perimeter
G1 X103.613 Y95.241 E0.00959 ; perimeter
G1 X102.848 Y95.167 E0.03560 ; perimeter
G1 X102.632 Y95.064 E0.01110 ; perimeter
G1 X101.858 Y94.891 E0.03674 ; perimeter
G1 X101.638 Y95.056 E0.01277 ; perimeter
G1 X101.575 Y95.066 E0.00293 ; perimeter
G1 X101.215 Y95.222 E0.01818 ; perimeter
G1 X100.425 Y95.357 E0.03713 ; perimeter
G1 X100.059 Y95.481 E0.01790 ; perimeter
G1 X99.733 Y95.698 E0.01812 ; perimeter
G1 X99.540 Y95.974 E0.01563 ; perimeter
G1 X99.400 Y96.217 E0.01299 ; perimeter
G1 X99.359 Y96.247 E0.00233 ; perimeter
G1 X99.265 Y96.425 E0.00933 ; perimeter
G1 X99.164 Y96.772 E0.01675 ; perimeter
G1 X99.125 Y97.344 E0.02655 ; perimeter
G1 X99.245 Y98.010 E0.03137 ; perimeter
G1 X99.270 Y98.973 E0.04461 ; perimeter
G1 X99.240 Y99.500 E0.02445 ; perimeter
G1 X99.135 Y99.836 E0.01631 ; perimeter
G1 X99.047 Y99.935 E0.00613 ; perimeter
G1 X98.951 Y99.967 E0.00470 ; perimeter
G1 X98.773 Y99.905 E0.00872 ; perimeter
G1 X98.667 Y99.797 E0.00698 ; perimeter
G1 X98.582 Y99.566 E0.01143 ; perimeter
G1 X98.437 Y98.260 E0.06084 ; perimeter
G1 X98.423 Y97.692 E0.02632 ; perimeter
G1 X98.456 Y97.161 E0.02464 ; perimeter
G1 X98.518 Y96.852 E0.01461 ; perimeter
G1 X98.546 Y96.468 E0.01783 ; perimeter
G1 X98.654 Y96.021 E0.02129 ; perimeter
G1 X98.754 Y95.805 E0.01104 ; perimeter
G1 X98.808 Y95.616 E0.00912 ; perimeter
G1 X98.956 Y95.318 E0.01539 ; perimeter
G1 X99.073 Y95.173 E0.00865 ; perimeter
G1 X99.262 Y94.986 E0.01233 ; perimeter
G1 X99.524 Y94.832 E0.01405 ; perimeter
G1 X99.720 Y94.774 E0.00946 ; perimeter
G1 X99.914 Y94.680 E0.00997 ; perimeter
G1 X100.550 Y94.561 E0.02999 ; perimeter
G1 X101.082 Y94.583 E0.02468 ; perimeter
G1 X101.360 Y94.643 E0.01314 ; perimeter
G1 X101.583 Y94.761 E0.01171 ; perimeter
G1 X101.863 Y94.758 E0.01296 ; perimeter
G1 X102.246 Y94.819 E0.01797 ; perimeter
G1 X102.481 Y94.624 E0.01414 ; perimeter
G1 X102.825 Y94.498 E0.01698 ; perimeter
G1 X103.051 Y94.344 E0.01266 ; perimeter
G1 X103.245 Y94.337 E0.00898 ; perimeter
G1 X103.623 Y94.395 E0.01774 ; perimeter
G1 X103.834 Y94.526 E0.01147 ; perimeter
G1 X103.909 Y94.647 E0.00661 ; perimeter
G1 X104.045 Y94.802 E0.00952 ; perimeter
G1 X104.060 Y95.026 E0.01041 ; perimeter
G1 X104.034 Y95.078 E0.00270 ; perimeter
G1 X103.803 Y95.083 F10800.000 ; move inwards before travel
G1 X103.813 Y94.956 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288251
G1 F2400.000
G1 X103.625 Y94.877 E0.00417 ; infill
G1 X103.119 Y94.589 E0.01187 ; infill
G1 X103.645 Y94.693 F10800.000 ; move to first infill point
;WIDTH:0.290194
G1 F2400.000
G1 X102.976 Y94.822 E0.01402 ; infill
;WIDTH:0.273194
G1 X102.747 Y94.851 E0.00442 ; infill
G1 X102.825 Y94.755 F10800.000 ; move to first infill point
;WIDTH:0.424006
G1 F2400.000
G1 X103.216 Y94.769 E0.01242 ; infill
G1 X103.757 Y94.837 E0.01725 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.216 Y94.769 E-0.14365 ; wipe and retract
G1 X102.825 Y94.755 E-0.10346 ; wipe and retract
;WIPE_END
G1 E-2.15290 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X101.314 Y94.891 ; move to first infill point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.252857
G1 F2400.000
G1 X100.573 Y94.943 E0.01296 ; infill
G1 X100.318 Y94.988 E0.00452 ; infill
;WIDTH:0.350157
G1 X100.050 Y95.060 E0.00710 ; infill
G1 X99.903 Y95.120 E0.00405 ; infill
G1 X99.523 Y95.326 E0.01103 ; infill
G1 X99.417 Y95.421 E0.00364 ; infill
G1 X99.318 Y95.549 E0.00414 ; infill
G1 X99.190 Y95.764 E0.00638 ; infill
G1 X99.120 Y95.929 E0.00459 ; infill
;WIDTH:0.332821
G1 X99.091 Y95.976 E0.00132 ; infill
;WIDTH:0.315614
G1 X99.059 Y96.025 E0.00134 ; infill
;WIDTH:0.299038
G1 X98.947 Y96.284 E0.00601 ; infill
;WIDTH:0.254223
G1 X98.883 Y96.521 E0.00430 ; infill
;WIDTH:0.241378
G1 X98.850 Y96.708 E0.00314 ; infill
;WIDTH:0.201585
G1 X98.794 Y97.205 E0.00660 ; infill
G1 X98.794 Y97.537 E0.00438 ; infill
;WIDTH:0.320315
G1 X98.894 Y98.967 E0.03307 ; infill
;WIDTH:0.312691
G1 X98.900 Y99.204 E0.00530 ; infill
;WIDTH:0.272951
G1 X98.906 Y99.440 E0.00452 ; infill
;WIDTH:0.233213
G1 X98.884 Y99.674 E0.00372 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.906 Y99.440 E-0.06209 ; wipe and retract
;WIPE_END
G1 E-2.33791 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X100.669 Y103.353 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.771 Y103.286 E0.00569 ; perimeter
G1 X101.034 Y103.215 E0.01259 ; perimeter
G1 X101.277 Y103.329 E0.01242 ; perimeter
G1 X101.458 Y103.605 E0.01532 ; perimeter
G1 X101.513 Y103.727 E0.00621 ; perimeter
G1 X101.489 Y103.942 E0.01002 ; perimeter
G1 X101.439 Y104.085 E0.00700 ; perimeter
G1 X101.265 Y104.156 E0.00870 ; perimeter
G1 X101.068 Y104.173 E0.00918 ; perimeter
G1 X100.867 Y104.115 E0.00968 ; perimeter
G1 X100.778 Y104.065 E0.00470 ; perimeter
G1 X100.734 Y104.027 E0.00272 ; perimeter
G1 X100.601 Y103.764 E0.01362 ; perimeter
G1 X100.612 Y103.508 E0.01189 ; perimeter
G1 X100.648 Y103.409 E0.00486 ; perimeter
G1 X100.789 Y103.376 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.771 Y103.286 E-0.04612 ; wipe and retract
G1 X101.034 Y103.215 E-0.07173 ; wipe and retract
G1 X101.277 Y103.329 E-0.07076 ; wipe and retract
G1 X101.458 Y103.605 E-0.08725 ; wipe and retract
G1 X101.513 Y103.727 E-0.03539 ; wipe and retract
G1 X101.489 Y103.942 E-0.05709 ; wipe and retract
G1 X101.439 Y104.085 E-0.03987 ; wipe and retract
G1 X101.265 Y104.156 E-0.04958 ; wipe and retract
G1 X101.068 Y104.173 E-0.05227 ; wipe and retract
G1 X100.867 Y104.115 E-0.05512 ; wipe and retract
G1 X100.778 Y104.065 E-0.02677 ; wipe and retract
G1 X100.734 Y104.027 E-0.01552 ; wipe and retract
G1 X100.601 Y103.764 E-0.07759 ; wipe and retract
G1 X100.612 Y103.508 E-0.06776 ; wipe and retract
G1 X100.648 Y103.409 E-0.02768 ; wipe and retract
;WIPE_END
G1 E-1.61950 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X105.114 Y106.359 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.338 Y106.543 E0.01343 ; perimeter
G1 X105.481 Y106.801 E0.01369 ; perimeter
G1 X105.488 Y106.930 E0.00596 ; perimeter
G1 X105.570 Y107.047 E0.00664 ; perimeter
G1 X105.503 Y107.309 E0.01251 ; perimeter
G1 X105.447 Y107.312 E0.00257 ; perimeter
G1 X105.293 Y107.243 E0.00783 ; perimeter
G1 X104.936 Y107.190 E0.01671 ; perimeter
G1 X104.726 Y107.089 E0.01080 ; perimeter
G1 X104.506 Y106.880 E0.01404 ; perimeter
G1 X104.432 Y106.706 E0.00876 ; perimeter
G1 X104.440 Y106.497 E0.00970 ; perimeter
G1 X104.525 Y106.360 E0.00747 ; perimeter
G1 X104.680 Y106.280 E0.00805 ; perimeter
G1 X104.843 Y106.274 E0.00759 ; perimeter
G1 X105.059 Y106.333 E0.01038 ; perimeter
G1 X105.115 Y106.648 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.338 Y106.543 E-0.09190 ; wipe and retract
G1 X105.481 Y106.801 E-0.07798 ; wipe and retract
G1 X105.488 Y106.930 E-0.03395 ; wipe and retract
G1 X105.570 Y107.047 E-0.03783 ; wipe and retract
G1 X105.503 Y107.309 E-0.07129 ; wipe and retract
G1 X105.447 Y107.312 E-0.01462 ; wipe and retract
G1 X105.293 Y107.243 E-0.04463 ; wipe and retract
G1 X104.936 Y107.190 E-0.09519 ; wipe and retract
G1 X104.726 Y107.089 E-0.06153 ; wipe and retract
G1 X104.506 Y106.880 E-0.07998 ; wipe and retract
G1 X104.432 Y106.706 E-0.04992 ; wipe and retract
G1 X104.440 Y106.497 E-0.05528 ; wipe and retract
G1 X104.525 Y106.360 E-0.04255 ; wipe and retract
G1 X104.680 Y106.280 E-0.04584 ; wipe and retract
G1 X104.843 Y106.274 E-0.04323 ; wipe and retract
G1 X105.059 Y106.333 E-0.05911 ; wipe and retract
;WIPE_END
G1 E-1.49514 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X107.303 Y108.785 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.093 Y108.855 E0.01021 ; perimeter
G1 X106.784 Y108.743 E0.01522 ; perimeter
G1 X106.404 Y108.391 E0.02400 ; perimeter
G1 X106.353 Y108.304 E0.00469 ; perimeter
G1 X106.292 Y108.108 E0.00952 ; perimeter
G1 X106.154 Y107.880 E0.01233 ; perimeter
G1 X106.177 Y107.753 E0.00597 ; perimeter
G1 X106.143 Y107.719 E0.00221 ; perimeter
G1 X106.201 Y107.632 E0.00485 ; perimeter
G1 X106.436 Y107.640 E0.01089 ; perimeter
G1 X106.734 Y107.723 E0.01432 ; perimeter
G1 X106.890 Y107.822 E0.00855 ; perimeter
G1 X107.132 Y107.928 E0.01228 ; perimeter
G1 X107.199 Y107.984 E0.00402 ; perimeter
G1 X107.342 Y108.171 E0.01091 ; perimeter
G1 X107.395 Y108.326 E0.00757 ; perimeter
G1 X107.379 Y108.639 E0.01453 ; perimeter
G1 X107.330 Y108.732 E0.00485 ; perimeter
G1 X107.097 Y108.704 F10800.000 ; move inwards before travel
G1 X107.143 Y108.527 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.209813
G1 F2400.000
G1 X106.856 Y108.259 E0.00545 ; infill
;WIDTH:0.184016
G1 X106.568 Y107.991 E0.00461 ; infill
;WIDTH:0.158219
G1 X106.469 Y107.909 E0.00124 ; infill
G1 X105.233 Y106.990 F10800.000 ; move to first infill point
;WIDTH:0.346998
G1 F2400.000
G1 X105.030 Y106.799 E0.00705 ; infill
G1 X104.687 Y106.556 E0.01062 ; infill
G1 X104.687 Y106.556 F10800.000 ; move to first infill point
;WIDTH:0.189019
G1 F2400.000
G1 X104.726 Y106.582 E0.00057 ; infill
;WIDTH:0.220393
G1 X104.766 Y106.607 E0.00069 ; infill
;WIDTH:0.253473
G1 X104.782 Y106.623 E0.00039 ; infill
;WIDTH:0.286552
G1 X104.798 Y106.639 E0.00046 ; infill
;WIDTH:0.303229
G1 X104.810 Y106.647 E0.00032 ; infill
;WIDTH:0.320287
G1 X105.222 Y106.988 E0.01234 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.810 Y106.647 E-0.14115 ; wipe and retract
;WIPE_END
G1 E-2.25885 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X108.239 Y112.810 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.292 Y112.669 E0.00697 ; perimeter
G1 X108.424 Y112.598 E0.00695 ; perimeter
G1 X108.554 Y112.597 E0.00601 ; perimeter
G1 X108.798 Y112.680 E0.01193 ; perimeter
G1 X109.043 Y112.867 E0.01428 ; perimeter
G1 X109.126 Y112.946 E0.00532 ; perimeter
G1 X109.208 Y113.118 E0.00880 ; perimeter
G1 X109.269 Y113.183 E0.00415 ; perimeter
G1 X109.333 Y113.322 E0.00709 ; perimeter
G1 X109.382 Y113.590 E0.01260 ; perimeter
G1 X109.463 Y113.725 E0.00727 ; perimeter
G1 X109.480 Y113.799 E0.00353 ; perimeter
G1 X109.393 Y113.864 E0.00504 ; perimeter
G1 X109.401 Y113.895 E0.00146 ; perimeter
G1 X109.365 Y113.871 E0.00197 ; perimeter
G1 X109.133 Y113.880 E0.01076 ; perimeter
G1 X109.024 Y113.854 E0.00521 ; perimeter
G1 X108.654 Y113.625 E0.02015 ; perimeter
G1 X108.471 Y113.435 E0.01223 ; perimeter
G1 X108.266 Y113.071 E0.01934 ; perimeter
G1 X108.245 Y112.870 E0.00937 ; perimeter
G1 X108.378 Y112.751 F10800.000 ; move inwards before travel
G1 X108.488 Y112.881 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.268593
G1 F2400.000
G1 X109.093 Y113.377 E0.01468 ; infill
G1 X109.136 Y113.586 F10800.000 ; move to first infill point
;WIDTH:0.288298
G1 F2400.000
G1 X108.893 Y113.330 E0.00721 ; infill
G1 X108.528 Y112.844 E0.01238 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.893 Y113.330 E-0.16018 ; wipe and retract
G1 X109.136 Y113.586 E-0.09330 ; wipe and retract
;WIPE_END
G1 E-2.14652 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X111.013 Y115.548 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.068 Y115.391 E0.00773 ; perimeter
G1 X111.190 Y115.404 E0.00569 ; perimeter
G1 X111.395 Y115.355 E0.00976 ; perimeter
G1 X111.440 Y115.384 E0.00247 ; perimeter
G1 X111.689 Y115.399 E0.01156 ; perimeter
G1 X111.745 Y115.448 E0.00346 ; perimeter
G1 X111.863 Y115.500 E0.00595 ; perimeter
G1 X111.940 Y115.717 E0.01064 ; perimeter
G1 X111.918 Y115.948 E0.01079 ; perimeter
G1 X111.794 Y116.092 E0.00879 ; perimeter
G1 X111.584 Y116.145 E0.01005 ; perimeter
G1 X111.432 Y116.130 E0.00708 ; perimeter
G1 X111.275 Y116.069 E0.00777 ; perimeter
G1 X111.201 Y116.010 E0.00441 ; perimeter
G1 X111.144 Y115.925 E0.00472 ; perimeter
G1 X111.136 Y115.855 E0.00327 ; perimeter
G1 X111.024 Y115.608 E0.01259 ; perimeter
G1 X111.166 Y115.482 F10800.000 ; move inwards before travel
G1 X111.496 Y115.758 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.308425
G1 F2400.000
G1 X111.563 Y115.772 E0.00150 ; infill
;WIDTH:0.299562
G1 X111.564 Y115.772 E0.00002 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.563 Y115.772 E-0.00021 ; wipe and retract
;WIPE_END
G1 E-2.39979 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X114.325 Y115.530 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.357 Y115.399 E0.00623 ; perimeter
G1 X114.514 Y115.195 E0.01193 ; perimeter
G1 X115.146 Y114.638 E0.03900 ; perimeter
G1 X115.341 Y114.570 E0.00959 ; perimeter
G1 X115.432 Y114.572 E0.00420 ; perimeter
G1 X115.640 Y114.680 E0.01084 ; perimeter
G1 X115.747 Y114.856 E0.00955 ; perimeter
G1 X115.768 Y115.008 E0.00711 ; perimeter
G1 X115.723 Y115.155 E0.00712 ; perimeter
G1 X115.596 Y115.322 E0.00971 ; perimeter
G1 X115.266 Y115.614 E0.02045 ; perimeter
G1 X115.099 Y115.796 E0.01142 ; perimeter
G1 X114.888 Y115.952 E0.01217 ; perimeter
G1 X114.726 Y116.003 E0.00786 ; perimeter
G1 X114.593 Y115.982 E0.00622 ; perimeter
G1 X114.445 Y115.884 E0.00822 ; perimeter
G1 X114.412 Y115.842 E0.00244 ; perimeter
G1 X114.335 Y115.691 E0.00789 ; perimeter
G1 X114.328 Y115.590 E0.00469 ; perimeter
G1 X114.446 Y115.471 F10800.000 ; move inwards before travel
G1 X114.663 Y115.739 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310271
G1 F2400.000
G1 X114.716 Y115.613 E0.00304 ; infill
;WIDTH:0.348321
G1 X114.723 Y115.584 E0.00075 ; infill
;WIDTH:0.360335
G1 X114.985 Y115.316 E0.00991 ; infill
G1 X115.362 Y114.980 E0.01333 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.985 Y115.316 E-0.13332 ; wipe and retract
G1 X114.723 Y115.584 E-0.09904 ; wipe and retract
;WIPE_END
G1 E-2.16764 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X115.431 Y112.619 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.337 Y112.578 E0.00478 ; perimeter
G1 X115.211 Y112.412 E0.00964 ; perimeter
G1 X115.161 Y112.230 E0.00875 ; perimeter
G1 X115.170 Y112.033 E0.00910 ; perimeter
G1 X115.285 Y111.806 E0.01182 ; perimeter
G1 X115.421 Y111.734 E0.00714 ; perimeter
G1 X115.546 Y111.723 E0.00583 ; perimeter
G1 X115.687 Y111.758 E0.00671 ; perimeter
G1 X115.799 Y111.855 E0.00685 ; perimeter
G1 X115.879 Y112.090 E0.01152 ; perimeter
G1 X115.879 Y112.232 E0.00653 ; perimeter
G1 X115.795 Y112.470 E0.01173 ; perimeter
G1 X115.677 Y112.578 E0.00740 ; perimeter
G1 X115.491 Y112.620 E0.00880 ; perimeter
G1 X115.393 Y112.523 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.337 Y112.578 E-0.04224 ; wipe and retract
G1 X115.211 Y112.412 E-0.05494 ; wipe and retract
G1 X115.161 Y112.230 E-0.04987 ; wipe and retract
G1 X115.170 Y112.033 E-0.05186 ; wipe and retract
G1 X115.285 Y111.806 E-0.06734 ; wipe and retract
G1 X115.421 Y111.734 E-0.04066 ; wipe and retract
G1 X115.546 Y111.723 E-0.03322 ; wipe and retract
G1 X115.687 Y111.758 E-0.03821 ; wipe and retract
G1 X115.799 Y111.855 E-0.03903 ; wipe and retract
G1 X115.879 Y112.090 E-0.06564 ; wipe and retract
G1 X115.879 Y112.232 E-0.03722 ; wipe and retract
G1 X115.795 Y112.470 E-0.06685 ; wipe and retract
G1 X115.677 Y112.578 E-0.04213 ; wipe and retract
G1 X115.491 Y112.620 E-0.05015 ; wipe and retract
;WIPE_END
G1 E-1.72066 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 X115.408 Y105.837 ; move to first perimeter point
G1 Z13.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.265 Y105.770 E0.00729 ; perimeter
G1 X115.143 Y105.564 E0.01110 ; perimeter
G1 X115.139 Y105.348 E0.01001 ; perimeter
G1 X115.221 Y105.166 E0.00922 ; perimeter
G1 X115.292 Y105.101 E0.00447 ; perimeter
G1 X115.416 Y105.049 E0.00624 ; perimeter
G1 X115.510 Y105.040 E0.00437 ; perimeter
G1 X115.630 Y105.061 E0.00566 ; perimeter
G1 X115.806 Y105.163 E0.00941 ; perimeter
G1 X115.880 Y105.313 E0.00777 ; perimeter
G1 X115.893 Y105.470 E0.00731 ; perimeter
G1 X115.874 Y105.604 E0.00627 ; perimeter
G1 X115.828 Y105.700 E0.00491 ; perimeter
G1 X115.699 Y105.807 E0.00777 ; perimeter
G1 X115.525 Y105.854 E0.00835 ; perimeter
G1 X115.467 Y105.846 E0.00272 ; perimeter
G1 X115.366 Y105.685 F10800.000 ; move inwards before travel
G1 X115.514 Y105.424 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.309603
G1 F2400.000
G1 X115.519 Y105.473 E0.00108 ; infill
;LAYER_CHANGE
;Z:13.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;13.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.514 Y105.424 E-0.01283 ; wipe and retract
;WIPE_END
G1 E-2.38717 F2400.000 ; retract
G1 Z13.675 F10800.000 ; lift Z
G1 Z13.800 ; move to next layer (68)
;AFTER_LAYER_CHANGE
;13.8
G1 Z13.875 ; lift Z
G1 X109.623 Y98.216 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.541 Y98.142 E0.00375 ; perimeter
G1 X109.372 Y98.094 E0.00593 ; perimeter
G1 X109.190 Y97.908 E0.00881 ; perimeter
G1 X108.917 Y97.550 E0.01524 ; perimeter
G1 X108.810 Y97.450 E0.00497 ; perimeter
G1 X109.065 Y97.430 E0.00865 ; perimeter
G1 X109.287 Y97.464 E0.00760 ; perimeter
G1 X109.306 Y97.582 E0.00406 ; perimeter
G1 X109.479 Y97.987 E0.01488 ; perimeter
G1 X109.591 Y98.165 E0.00714 ; perimeter
G1 X109.631 Y97.104 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.712 Y97.224 E0.00673 ; perimeter
G1 X109.775 Y97.452 E0.01098 ; perimeter
G1 X109.907 Y97.762 E0.01561 ; perimeter
G1 X110.057 Y98.001 E0.01303 ; perimeter
G1 X110.489 Y98.427 E0.02814 ; perimeter
G1 X110.685 Y98.880 E0.02287 ; perimeter
G1 X110.703 Y99.241 E0.01670 ; perimeter
G1 X110.759 Y99.585 E0.01615 ; perimeter
G1 X110.760 Y99.852 E0.01241 ; perimeter
G1 X110.883 Y100.662 E0.03793 ; perimeter
G1 X111.055 Y101.065 E0.02028 ; perimeter
G1 X111.421 Y101.496 E0.02620 ; perimeter
G1 X111.932 Y101.744 E0.02633 ; perimeter
G1 X112.471 Y101.809 E0.02512 ; perimeter
G1 X112.607 Y101.786 E0.00640 ; perimeter
G1 X112.873 Y101.830 E0.01248 ; perimeter
G1 X112.965 Y101.825 E0.00427 ; perimeter
G1 X113.518 Y102.019 E0.02716 ; perimeter
G1 X113.604 Y102.024 E0.00397 ; perimeter
G1 X113.844 Y102.171 E0.01305 ; perimeter
G1 X113.946 Y102.263 E0.00638 ; perimeter
G1 X114.106 Y102.581 E0.01648 ; perimeter
G1 X114.116 Y102.659 E0.00367 ; perimeter
G1 X114.072 Y102.884 E0.01061 ; perimeter
G1 X113.959 Y103.011 E0.00787 ; perimeter
G1 X113.725 Y103.040 E0.01093 ; perimeter
G1 X113.574 Y103.001 E0.00722 ; perimeter
G1 X113.056 Y102.698 E0.02782 ; perimeter
G1 X112.065 Y102.635 E0.04600 ; perimeter
G1 X111.645 Y102.482 E0.02070 ; perimeter
G1 X111.026 Y101.938 E0.03816 ; perimeter
G1 X110.871 Y101.754 E0.01114 ; perimeter
G1 X110.691 Y101.652 E0.00960 ; perimeter
G1 X110.297 Y101.278 E0.02512 ; perimeter
G1 X110.151 Y101.095 E0.01089 ; perimeter
G1 X110.060 Y100.836 E0.01269 ; perimeter
G1 X110.014 Y100.532 E0.01425 ; perimeter
G1 X109.990 Y100.197 E0.01557 ; perimeter
G1 X110.001 Y99.949 E0.01151 ; perimeter
G1 X109.953 Y99.248 E0.03253 ; perimeter
G1 X109.698 Y98.881 E0.02069 ; perimeter
G1 X109.550 Y98.801 E0.00780 ; perimeter
G1 X109.301 Y98.575 E0.01557 ; perimeter
G1 X109.118 Y98.523 E0.00882 ; perimeter
G1 X108.825 Y98.224 E0.01939 ; perimeter
G1 X108.559 Y97.875 E0.02035 ; perimeter
G1 X108.342 Y97.673 E0.01373 ; perimeter
G1 X108.120 Y97.522 E0.01243 ; perimeter
G1 X107.974 Y97.349 E0.01047 ; perimeter
G1 X107.985 Y97.264 E0.00397 ; perimeter
G1 X108.026 Y97.269 E0.00194 ; perimeter
G1 X108.152 Y97.117 E0.00914 ; perimeter
G1 X108.320 Y97.091 E0.00789 ; perimeter
G1 X108.521 Y96.989 E0.01042 ; perimeter
G1 X109.082 Y96.946 E0.02608 ; perimeter
G1 X109.480 Y97.005 E0.01863 ; perimeter
G1 X109.580 Y97.071 E0.00556 ; perimeter
G1 X109.599 Y97.246 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.712 Y97.224 E-0.05330 ; wipe and retract
G1 X109.775 Y97.452 E-0.06254 ; wipe and retract
G1 X109.907 Y97.762 E-0.08892 ; wipe and retract
G1 X110.057 Y98.001 E-0.07426 ; wipe and retract
G1 X110.489 Y98.427 E-0.16029 ; wipe and retract
G1 X110.685 Y98.880 E-0.13029 ; wipe and retract
G1 X110.703 Y99.241 E-0.09516 ; wipe and retract
G1 X110.759 Y99.585 E-0.09199 ; wipe and retract
G1 X110.760 Y99.852 E-0.07070 ; wipe and retract
G1 X110.883 Y100.662 E-0.21608 ; wipe and retract
G1 X111.055 Y101.065 E-0.11555 ; wipe and retract
G1 X111.421 Y101.496 E-0.14925 ; wipe and retract
G1 X111.932 Y101.744 E-0.14997 ; wipe and retract
G1 X112.471 Y101.809 E-0.14313 ; wipe and retract
G1 X112.607 Y101.786 E-0.03648 ; wipe and retract
G1 X112.873 Y101.830 E-0.07107 ; wipe and retract
G1 X112.965 Y101.825 E-0.02430 ; wipe and retract
G1 X113.518 Y102.019 E-0.15472 ; wipe and retract
G1 X113.604 Y102.024 E-0.02263 ; wipe and retract
G1 X113.844 Y102.171 E-0.07434 ; wipe and retract
G1 X113.946 Y102.263 E-0.03632 ; wipe and retract
G1 X114.106 Y102.581 E-0.09388 ; wipe and retract
G1 X114.116 Y102.659 E-0.02091 ; wipe and retract
G1 X114.072 Y102.884 E-0.06043 ; wipe and retract
G1 X113.959 Y103.011 E-0.04486 ; wipe and retract
G1 X113.814 Y103.029 E-0.03860 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X107.447 Y96.646 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.360 Y96.815 E0.00878 ; perimeter
G1 X107.247 Y96.866 E0.00574 ; perimeter
G1 X106.851 Y96.741 E0.01926 ; perimeter
G1 X106.566 Y96.564 E0.01550 ; perimeter
G1 X106.285 Y96.333 E0.01687 ; perimeter
G1 X106.165 Y96.144 E0.01038 ; perimeter
G1 X106.169 Y96.062 E0.00377 ; perimeter
G1 X106.202 Y95.978 E0.00423 ; perimeter
G1 X106.417 Y95.836 E0.01193 ; perimeter
G1 X106.734 Y95.774 E0.01495 ; perimeter
G1 X107.082 Y95.829 E0.01631 ; perimeter
G1 X107.314 Y95.966 E0.01250 ; perimeter
G1 X107.430 Y96.188 E0.01162 ; perimeter
G1 X107.466 Y96.447 E0.01209 ; perimeter
G1 X107.452 Y96.586 E0.00649 ; perimeter
G1 X107.262 Y96.687 F10800.000 ; move inwards before travel
G1 X107.182 Y96.592 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.435102
G1 F2400.000
G1 X106.975 Y96.288 E0.01199 ; infill
G1 X106.508 Y96.073 E0.01677 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.975 Y96.288 E-0.13573 ; wipe and retract
G1 X107.182 Y96.592 E-0.09702 ; wipe and retract
;WIPE_END
G1 E-2.16725 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X110.475 Y99.341 ; move to first infill point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.427682
G1 F2400.000
G1 X110.111 Y98.686 E0.02397 ; infill
G1 X109.958 Y98.522 E0.00717 ; infill
G1 X109.786 Y98.394 E0.00687 ; infill
G1 X110.186 Y98.467 F10800.000 ; move to first infill point
;WIDTH:0.309743
G1 F2400.000
G1 X110.323 Y99.156 E0.01558 ; infill
G1 X110.331 Y99.288 E0.00293 ; infill
;WIDTH:0.330075
G1 X110.386 Y99.953 E0.01593 ; infill
;WIDTH:0.377251
G1 X110.399 Y100.192 E0.00665 ; infill
;WIDTH:0.400182
G1 X110.488 Y100.797 E0.01819 ; infill
G1 X110.523 Y100.889 E0.00290 ; infill
G1 X110.877 Y101.480 E0.02048 ; infill
G1 X110.275 Y100.646 F10800.000 ; move to first infill point
;WIDTH:0.243412
G1 F2400.000
G1 X110.890 Y101.383 E0.01600 ; infill
;WIDTH:0.149952
G1 X111.067 Y101.532 E0.00206 ; infill
G1 X111.246 Y101.739 E0.00244 ; infill
;WIDTH:0.194796
G1 X111.385 Y101.831 E0.00210 ; infill
;WIDTH:0.239641
G1 X111.524 Y101.923 E0.00272 ; infill
;WIDTH:0.284487
G1 X111.662 Y102.015 E0.00334 ; infill
;WIDTH:0.329333
G1 X111.801 Y102.107 E0.00396 ; infill
;WIDTH:0.349755
G1 X112.154 Y102.207 E0.00937 ; infill
G1 X112.885 Y102.258 E0.01869 ; infill
G1 X113.205 Y102.329 E0.00836 ; infill
;WIDTH:0.39556
G1 X113.416 Y102.425 E0.00679 ; infill
;WIDTH:0.407126
G1 X113.618 Y102.536 E0.00699 ; infill
G1 X113.850 Y102.764 E0.00984 ; infill
G1 X113.819 Y102.788 F10800.000 ; move to first infill point
;WIDTH:0.294462
G1 F2400.000
G1 X113.741 Y102.665 E0.00304 ; infill
G1 X113.107 Y102.135 E0.01729 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.741 Y102.665 E-0.21815 ; wipe and retract
G1 X113.819 Y102.788 E-0.03841 ; wipe and retract
;WIPE_END
G1 E-2.14343 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X103.890 Y95.022 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.769 Y95.150 E0.00812 ; perimeter
G1 X103.470 Y95.165 E0.01387 ; perimeter
G1 X103.051 Y95.125 E0.01953 ; perimeter
G1 X102.962 Y95.080 E0.00459 ; perimeter
G1 X102.912 Y95.023 E0.00349 ; perimeter
G1 X102.724 Y94.923 E0.00991 ; perimeter
G1 X102.669 Y94.825 E0.00519 ; perimeter
G1 X102.675 Y94.734 E0.00423 ; perimeter
G1 X102.770 Y94.656 E0.00568 ; perimeter
G1 X102.883 Y94.510 E0.00856 ; perimeter
G1 X103.194 Y94.317 E0.01699 ; perimeter
G1 X103.304 Y94.299 E0.00515 ; perimeter
G1 X103.609 Y94.344 E0.01428 ; perimeter
G1 X103.801 Y94.462 E0.01043 ; perimeter
G1 X103.860 Y94.525 E0.00400 ; perimeter
G1 X103.909 Y94.625 E0.00518 ; perimeter
G1 X103.935 Y94.923 E0.01386 ; perimeter
G1 X103.915 Y94.968 E0.00226 ; perimeter
G1 X103.714 Y95.023 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.769 Y95.150 E-0.06148 ; wipe and retract
G1 X103.470 Y95.165 E-0.07903 ; wipe and retract
G1 X103.051 Y95.125 E-0.11127 ; wipe and retract
G1 X102.962 Y95.080 E-0.02616 ; wipe and retract
G1 X102.912 Y95.023 E-0.01986 ; wipe and retract
G1 X102.724 Y94.923 E-0.05647 ; wipe and retract
G1 X102.669 Y94.825 E-0.02959 ; wipe and retract
G1 X102.675 Y94.734 E-0.02407 ; wipe and retract
G1 X102.770 Y94.656 E-0.03236 ; wipe and retract
G1 X102.883 Y94.510 E-0.04877 ; wipe and retract
G1 X103.194 Y94.317 E-0.09677 ; wipe and retract
G1 X103.304 Y94.299 E-0.02934 ; wipe and retract
G1 X103.609 Y94.344 E-0.08137 ; wipe and retract
G1 X103.801 Y94.462 E-0.05945 ; wipe and retract
G1 X103.860 Y94.525 E-0.02279 ; wipe and retract
G1 X103.909 Y94.625 E-0.02953 ; wipe and retract
G1 X103.935 Y94.923 E-0.07894 ; wipe and retract
G1 X103.915 Y94.968 E-0.01289 ; wipe and retract
;WIPE_END
G1 E-1.49987 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X101.358 Y94.930 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.318 Y94.962 E0.00237 ; perimeter
G1 X101.283 Y95.041 E0.00399 ; perimeter
G1 X101.115 Y95.118 E0.00855 ; perimeter
G1 X100.976 Y95.226 E0.00815 ; perimeter
G1 X100.590 Y95.303 E0.01822 ; perimeter
G1 X100.010 Y95.496 E0.02831 ; perimeter
G1 X99.665 Y95.739 E0.01956 ; perimeter
G1 X99.467 Y96.019 E0.01588 ; perimeter
G1 X99.318 Y96.350 E0.01681 ; perimeter
G1 X99.186 Y97.016 E0.03146 ; perimeter
G1 X99.209 Y98.533 E0.07028 ; perimeter
G1 X99.191 Y98.916 E0.01775 ; perimeter
G1 X99.235 Y99.113 E0.00935 ; perimeter
G1 X99.216 Y99.335 E0.01035 ; perimeter
G1 X99.245 Y99.532 E0.00919 ; perimeter
G1 X99.226 Y99.794 E0.01218 ; perimeter
G1 X99.107 Y100.103 E0.01536 ; perimeter
G1 X99.012 Y100.173 E0.00545 ; perimeter
G1 X98.931 Y100.188 E0.00379 ; perimeter
G1 X98.809 Y100.140 E0.00609 ; perimeter
G1 X98.680 Y100.012 E0.00843 ; perimeter
G1 X98.585 Y99.752 E0.01281 ; perimeter
G1 X98.531 Y99.171 E0.02703 ; perimeter
G1 X98.563 Y98.911 E0.01213 ; perimeter
G1 X98.423 Y97.936 E0.04564 ; perimeter
G1 X98.399 Y97.595 E0.01583 ; perimeter
G1 X98.399 Y97.005 E0.02732 ; perimeter
G1 X98.420 Y96.768 E0.01102 ; perimeter
G1 X98.466 Y96.545 E0.01056 ; perimeter
G1 X98.578 Y96.186 E0.01741 ; perimeter
G1 X98.807 Y95.684 E0.02556 ; perimeter
G1 X98.914 Y95.525 E0.00886 ; perimeter
G1 X99.256 Y95.106 E0.02507 ; perimeter
G1 X99.604 Y94.811 E0.02114 ; perimeter
G1 X100.013 Y94.626 E0.02077 ; perimeter
G1 X100.465 Y94.562 E0.02118 ; perimeter
G1 X100.796 Y94.574 E0.01534 ; perimeter
G1 X101.097 Y94.652 E0.01441 ; perimeter
G1 X101.301 Y94.778 E0.01107 ; perimeter
G1 X101.345 Y94.872 E0.00481 ; perimeter
G1 X101.308 Y94.939 F10800.000 ; move inwards before travel
G1 X101.005 Y94.898 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.300083
G1 F2400.000
G1 X100.487 Y94.940 E0.01112 ; infill
G1 X100.062 Y95.046 E0.00935 ; infill
G1 X99.821 Y95.146 E0.00558 ; infill
G1 X99.424 Y95.469 E0.01096 ; infill
;WIDTH:0.279537
G1 X99.141 Y95.847 E0.00928 ; infill
G1 X98.969 Y96.223 E0.00813 ; infill
G1 X98.816 Y96.826 E0.01226 ; infill
G1 X98.792 Y97.023 E0.00389 ; infill
G1 X98.797 Y97.581 E0.01099 ; infill
G1 X98.860 Y98.527 E0.01866 ; infill
;WIDTH:0.258638
G1 X98.869 Y98.713 E0.00333 ; infill
;WIDTH:0.223179
G1 X98.878 Y98.898 E0.00278 ; infill
;WIDTH:0.187721
G1 X98.881 Y99.335 E0.00526 ; infill
G1 X98.936 Y99.888 E0.00669 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.881 Y99.335 E-0.14663 ; wipe and retract
G1 X98.878 Y98.898 E-0.11528 ; wipe and retract
;WIPE_END
G1 E-2.13809 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X100.669 Y103.305 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.765 Y103.286 E0.00451 ; perimeter
G1 X101.021 Y103.284 E0.01187 ; perimeter
G1 X101.266 Y103.399 E0.01255 ; perimeter
G1 X101.402 Y103.629 E0.01238 ; perimeter
G1 X101.416 Y103.882 E0.01171 ; perimeter
G1 X101.320 Y104.070 E0.00975 ; perimeter
G1 X101.226 Y104.129 E0.00518 ; perimeter
G1 X101.030 Y104.186 E0.00944 ; perimeter
G1 X100.904 Y104.176 E0.00585 ; perimeter
G1 X100.689 Y104.034 E0.01196 ; perimeter
G1 X100.521 Y103.727 E0.01621 ; perimeter
G1 X100.532 Y103.543 E0.00852 ; perimeter
G1 X100.627 Y103.348 E0.01005 ; perimeter
G1 X100.755 Y103.352 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.765 Y103.286 E-0.03989 ; wipe and retract
G1 X101.021 Y103.284 E-0.06760 ; wipe and retract
G1 X101.266 Y103.399 E-0.07147 ; wipe and retract
G1 X101.402 Y103.629 E-0.07054 ; wipe and retract
G1 X101.416 Y103.882 E-0.06673 ; wipe and retract
G1 X101.320 Y104.070 E-0.05555 ; wipe and retract
G1 X101.226 Y104.129 E-0.02952 ; wipe and retract
G1 X101.030 Y104.186 E-0.05376 ; wipe and retract
G1 X100.904 Y104.176 E-0.03333 ; wipe and retract
G1 X100.689 Y104.034 E-0.06812 ; wipe and retract
G1 X100.521 Y103.727 E-0.09236 ; wipe and retract
G1 X100.532 Y103.543 E-0.04856 ; wipe and retract
G1 X100.627 Y103.348 E-0.05727 ; wipe and retract
;WIPE_END
G1 E-1.64528 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X104.544 Y106.932 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.516 Y106.845 E0.00424 ; perimeter
G1 X104.510 Y106.735 E0.00512 ; perimeter
G1 X104.526 Y106.612 E0.00575 ; perimeter
G1 X104.605 Y106.463 E0.00783 ; perimeter
G1 X104.764 Y106.371 E0.00850 ; perimeter
G1 X104.944 Y106.354 E0.00835 ; perimeter
G1 X105.090 Y106.381 E0.00688 ; perimeter
G1 X105.226 Y106.443 E0.00694 ; perimeter
G1 X105.463 Y106.647 E0.01449 ; perimeter
G1 X105.644 Y106.949 E0.01631 ; perimeter
G1 X105.763 Y107.030 E0.00666 ; perimeter
G1 X105.897 Y107.218 E0.01071 ; perimeter
G1 X106.560 Y107.572 E0.03483 ; perimeter
G1 X107.175 Y107.963 E0.03375 ; perimeter
G1 X107.378 Y108.206 E0.01467 ; perimeter
G1 X107.471 Y108.450 E0.01209 ; perimeter
G1 X107.467 Y108.771 E0.01489 ; perimeter
G1 X107.426 Y108.863 E0.00464 ; perimeter
G1 X107.308 Y108.961 E0.00709 ; perimeter
G1 X107.204 Y108.987 E0.00497 ; perimeter
G1 X106.902 Y108.870 E0.01503 ; perimeter
G1 X106.644 Y108.651 E0.01563 ; perimeter
G1 X106.319 Y108.322 E0.02147 ; perimeter
G1 X106.249 Y108.203 E0.00636 ; perimeter
G1 X106.071 Y108.031 E0.01148 ; perimeter
G1 X105.995 Y107.906 E0.00677 ; perimeter
G1 X105.799 Y107.716 E0.01264 ; perimeter
G1 X105.671 Y107.534 E0.01032 ; perimeter
G1 X105.403 Y107.424 E0.01343 ; perimeter
G1 X105.200 Y107.288 E0.01130 ; perimeter
G1 X104.925 Y107.248 E0.01288 ; perimeter
G1 X104.833 Y107.196 E0.00488 ; perimeter
G1 X104.575 Y106.984 E0.01546 ; perimeter
G1 X104.592 Y106.854 F10800.000 ; move inwards before travel
G1 X104.844 Y106.606 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.190001
G1 F2400.000
G1 X105.471 Y107.128 E0.00999 ; infill
G1 X106.061 Y107.621 F10800.000 ; move to first infill point
;WIDTH:0.380848
G1 F2400.000
G1 X106.475 Y107.955 E0.01494 ; infill
;WIDTH:0.412392
G1 X106.889 Y108.289 E0.01634 ; infill
G1 X107.231 Y108.638 E0.01501 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.889 Y108.289 E-0.12891 ; wipe and retract
G1 X106.475 Y107.955 E-0.14035 ; wipe and retract
;WIPE_END
G1 E-2.13074 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X108.377 Y112.968 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.430 Y112.825 E0.00709 ; perimeter
G1 X108.530 Y112.769 E0.00528 ; perimeter
G1 X108.712 Y112.762 E0.00844 ; perimeter
G1 X108.979 Y112.853 E0.01306 ; perimeter
G1 X109.202 Y113.005 E0.01252 ; perimeter
G1 X109.244 Y113.091 E0.00440 ; perimeter
G1 X109.363 Y113.217 E0.00803 ; perimeter
G1 X109.511 Y113.543 E0.01663 ; perimeter
G1 X109.742 Y113.903 E0.01980 ; perimeter
G1 X109.814 Y113.981 E0.00493 ; perimeter
G1 X109.928 Y114.198 E0.01132 ; perimeter
G1 X110.015 Y114.264 E0.00506 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.229 Y114.428 E0.01126 ; perimeter (bridge)
G1 X110.562 Y114.807 E0.02108 ; perimeter (bridge)
G1 X110.765 Y114.993 E0.01149 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.940 Y115.153 E0.01101 ; perimeter
G1 X111.127 Y115.220 E0.00919 ; perimeter
G1 X111.247 Y115.302 E0.00672 ; perimeter
G1 X111.418 Y115.322 E0.00797 ; perimeter
G1 X111.510 Y115.381 E0.00507 ; perimeter
G1 X111.680 Y115.392 E0.00790 ; perimeter
G1 X111.843 Y115.520 E0.00962 ; perimeter
G1 X111.916 Y115.726 E0.01009 ; perimeter
G1 X111.890 Y115.959 E0.01090 ; perimeter
G1 X111.774 Y116.087 E0.00801 ; perimeter
G1 X111.548 Y116.147 E0.01082 ; perimeter
G1 X111.443 Y116.142 E0.00491 ; perimeter
G1 X111.251 Y116.071 E0.00947 ; perimeter
G1 X111.103 Y115.946 E0.00898 ; perimeter
G1 X110.893 Y115.564 E0.02021 ; perimeter
G1 X110.731 Y115.318 E0.01364 ; perimeter
G1 X110.551 Y115.140 E0.01171 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.749 Y114.420 E0.04505 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.658 Y114.340 E0.00562 ; perimeter
G1 X109.372 Y114.184 E0.01508 ; perimeter
G1 X109.313 Y114.125 E0.00389 ; perimeter
G1 X108.810 Y113.801 E0.02771 ; perimeter
G1 X108.590 Y113.564 E0.01496 ; perimeter
G1 X108.395 Y113.207 E0.01884 ; perimeter
G1 X108.376 Y113.028 E0.00835 ; perimeter
G1 X108.518 Y112.908 F10800.000 ; move inwards before travel
G1 X108.617 Y113.033 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301872
G1 F2400.000
G1 X108.808 Y113.190 E0.00532 ; infill
;WIDTH:0.313474
G1 X109.241 Y113.532 E0.01242 ; infill
G1 X109.270 Y113.810 F10800.000 ; move to first infill point
;WIDTH:0.36273
G1 F2400.000
G1 X109.025 Y113.443 E0.01173 ; infill
G1 X108.918 Y113.328 E0.00420 ; infill
G1 X108.767 Y113.038 E0.00870 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.918 Y113.328 E-0.08632 ; wipe and retract
G1 X109.025 Y113.443 E-0.04164 ; wipe and retract
G1 X109.270 Y113.810 E-0.11637 ; wipe and retract
;WIPE_END
G1 E-2.15567 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X114.332 Y115.532 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.363 Y115.400 E0.00627 ; perimeter
G1 X114.522 Y115.192 E0.01211 ; perimeter
G1 X114.913 Y114.822 E0.02494 ; perimeter
G1 X115.170 Y114.617 E0.01522 ; perimeter
G1 X115.343 Y114.556 E0.00853 ; perimeter
G1 X115.416 Y114.556 E0.00336 ; perimeter
G1 X115.641 Y114.658 E0.01146 ; perimeter
G1 X115.759 Y114.844 E0.01017 ; perimeter
G1 X115.778 Y114.987 E0.00671 ; perimeter
G1 X115.734 Y115.138 E0.00727 ; perimeter
G1 X115.596 Y115.320 E0.01058 ; perimeter
G1 X115.289 Y115.593 E0.01903 ; perimeter
G1 X115.101 Y115.797 E0.01284 ; perimeter
G1 X114.891 Y115.953 E0.01214 ; perimeter
G1 X114.724 Y116.004 E0.00808 ; perimeter
G1 X114.595 Y115.978 E0.00609 ; perimeter
G1 X114.454 Y115.886 E0.00781 ; perimeter
G1 X114.410 Y115.831 E0.00324 ; perimeter
G1 X114.342 Y115.692 E0.00714 ; perimeter
G1 X114.336 Y115.592 E0.00468 ; perimeter
G1 X114.453 Y115.473 F10800.000 ; move inwards before travel
G1 X114.721 Y115.612 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311229
G1 F2400.000
G1 X114.725 Y115.752 E0.00312 ; infill
G1 X114.721 Y115.612 F10800.000 ; move to first infill point
;WIDTH:0.34061
G1 F2400.000
G1 X114.726 Y115.589 E0.00057 ; infill
;WIDTH:0.371628
G1 X114.742 Y115.558 E0.00095 ; infill
;WIDTH:0.378788
G1 X115.365 Y114.969 E0.02395 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.742 Y115.558 E-0.22635 ; wipe and retract
;WIPE_END
G1 E-2.17365 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X115.410 Y112.692 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.323 Y112.652 E0.00442 ; perimeter
G1 X115.192 Y112.452 E0.01110 ; perimeter
G1 X115.161 Y112.307 E0.00686 ; perimeter
G1 X115.171 Y112.097 E0.00977 ; perimeter
G1 X115.275 Y111.899 E0.01033 ; perimeter
G1 X115.427 Y111.807 E0.00827 ; perimeter
G1 X115.554 Y111.798 E0.00587 ; perimeter
G1 X115.713 Y111.847 E0.00772 ; perimeter
G1 X115.805 Y111.941 E0.00610 ; perimeter
G1 X115.881 Y112.175 E0.01140 ; perimeter
G1 X115.883 Y112.281 E0.00489 ; perimeter
G1 X115.788 Y112.565 E0.01387 ; perimeter
G1 X115.683 Y112.655 E0.00643 ; perimeter
G1 X115.524 Y112.694 E0.00757 ; perimeter
G1 X115.469 Y112.690 E0.00256 ; perimeter
G1 X115.383 Y112.600 F10800.000 ; move inwards before travel
G1 X115.526 Y112.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23137
G1 F2400.000
G1 X115.523 Y112.229 E0.00168 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.526 Y112.122 E-0.02822 ; wipe and retract
;WIPE_END
G1 E-2.37178 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 X115.532 Y105.832 ; move to first perimeter point
G1 Z13.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.400 Y105.812 E0.00619 ; perimeter
G1 X115.275 Y105.760 E0.00627 ; perimeter
G1 X115.222 Y105.697 E0.00381 ; perimeter
G1 X115.143 Y105.541 E0.00810 ; perimeter
G1 X115.148 Y105.307 E0.01086 ; perimeter
G1 X115.222 Y105.147 E0.00813 ; perimeter
G1 X115.309 Y105.069 E0.00544 ; perimeter
G1 X115.413 Y105.028 E0.00518 ; perimeter
G1 X115.520 Y105.016 E0.00500 ; perimeter
G1 X115.602 Y105.032 E0.00383 ; perimeter
G1 X115.796 Y105.137 E0.01025 ; perimeter
G1 X115.843 Y105.196 E0.00347 ; perimeter
G1 X115.883 Y105.308 E0.00553 ; perimeter
G1 X115.893 Y105.462 E0.00714 ; perimeter
G1 X115.873 Y105.585 E0.00579 ; perimeter
G1 X115.827 Y105.680 E0.00489 ; perimeter
G1 X115.682 Y105.801 E0.00873 ; perimeter
G1 X115.591 Y105.820 E0.00431 ; perimeter
G1 X115.458 Y105.720 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:14
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;14
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.400 Y105.812 E-0.05048 ; wipe and retract
G1 X115.275 Y105.760 E-0.03572 ; wipe and retract
G1 X115.222 Y105.697 E-0.02171 ; wipe and retract
G1 X115.143 Y105.541 E-0.04612 ; wipe and retract
G1 X115.148 Y105.307 E-0.06187 ; wipe and retract
G1 X115.222 Y105.147 E-0.04634 ; wipe and retract
G1 X115.309 Y105.069 E-0.03098 ; wipe and retract
G1 X115.413 Y105.028 E-0.02953 ; wipe and retract
G1 X115.520 Y105.016 E-0.02850 ; wipe and retract
G1 X115.602 Y105.032 E-0.02184 ; wipe and retract
G1 X115.796 Y105.137 E-0.05839 ; wipe and retract
G1 X115.843 Y105.196 E-0.01978 ; wipe and retract
G1 X115.883 Y105.308 E-0.03148 ; wipe and retract
G1 X115.893 Y105.462 E-0.04066 ; wipe and retract
G1 X115.873 Y105.585 E-0.03298 ; wipe and retract
G1 X115.827 Y105.680 E-0.02788 ; wipe and retract
G1 X115.682 Y105.801 E-0.04976 ; wipe and retract
G1 X115.591 Y105.820 E-0.02457 ; wipe and retract
;WIPE_END
G1 E-1.74139 F2400.000 ; retract
G1 Z13.875 F10800.000 ; lift Z
G1 Z14.000 ; move to next layer (69)
;AFTER_LAYER_CHANGE
;14
G1 Z14.075 ; lift Z
G1 X113.052 Y102.214 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.961 Y102.209 E0.00306 ; perimeter
G1 X112.994 Y102.207 E0.00110 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.961 Y102.209 E-0.00856 ; wipe and retract
G1 X112.994 Y102.207 E-0.00856 ; wipe and retract
;WIPE_END
G1 E-2.38287 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X110.308 Y98.948 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.226 Y98.829 E0.00493 ; perimeter
G1 X110.142 Y98.628 E0.00735 ; perimeter
G1 X109.763 Y98.286 E0.01726 ; perimeter
G1 X109.702 Y98.197 E0.00366 ; perimeter
G1 X109.461 Y97.964 E0.01137 ; perimeter
G1 X109.180 Y97.565 E0.01649 ; perimeter
G1 X109.062 Y97.456 E0.00545 ; perimeter
G1 X109.350 Y97.398 E0.00994 ; perimeter
G1 X109.439 Y97.417 E0.00308 ; perimeter
G1 X109.488 Y97.775 E0.01225 ; perimeter
G1 X109.607 Y98.007 E0.00881 ; perimeter
G1 X109.805 Y98.299 E0.01196 ; perimeter
G1 X110.267 Y98.709 E0.02089 ; perimeter
G1 X110.334 Y98.739 E0.00247 ; perimeter
G1 X110.315 Y98.889 E0.00511 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.226 Y98.829 E-0.02852 ; wipe and retract
G1 X110.142 Y98.628 E-0.05733 ; wipe and retract
G1 X109.763 Y98.286 E-0.13457 ; wipe and retract
G1 X109.702 Y98.197 E-0.02854 ; wipe and retract
G1 X109.461 Y97.964 E-0.08863 ; wipe and retract
G1 X109.180 Y97.565 E-0.12858 ; wipe and retract
G1 X109.062 Y97.456 E-0.04245 ; wipe and retract
G1 X109.350 Y97.398 E-0.07749 ; wipe and retract
G1 X109.439 Y97.417 E-0.02397 ; wipe and retract
G1 X109.488 Y97.775 E-0.09553 ; wipe and retract
G1 X109.607 Y98.007 E-0.06871 ; wipe and retract
G1 X109.805 Y98.299 E-0.09324 ; wipe and retract
G1 X110.267 Y98.709 E-0.16284 ; wipe and retract
G1 X110.334 Y98.739 E-0.01928 ; wipe and retract
G1 X110.315 Y98.889 E-0.03983 ; wipe and retract
;WIPE_END
G1 E-1.31048 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X111.611 Y101.926 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.048 Y101.890 E0.02034 ; perimeter
G1 X112.373 Y101.806 E0.01552 ; perimeter
G1 X112.839 Y101.733 E0.02189 ; perimeter
G1 X113.135 Y101.717 E0.01369 ; perimeter
G1 X113.399 Y101.847 E0.01362 ; perimeter
G1 X113.567 Y101.898 E0.00817 ; perimeter
G1 X113.841 Y102.113 E0.01611 ; perimeter
G1 X114.006 Y102.414 E0.01590 ; perimeter
G1 X114.033 Y102.573 E0.00747 ; perimeter
G1 X114.009 Y102.724 E0.00708 ; perimeter
G1 X113.992 Y102.767 E0.00216 ; perimeter
G1 X113.881 Y102.884 E0.00743 ; perimeter
G1 X113.645 Y102.929 E0.01114 ; perimeter
G1 X113.532 Y102.905 E0.00537 ; perimeter
G1 X113.092 Y102.699 E0.02249 ; perimeter
G1 X112.862 Y102.687 E0.01067 ; perimeter
G1 X112.466 Y102.605 E0.01871 ; perimeter
G1 X112.239 Y102.586 E0.01057 ; perimeter
G1 X111.882 Y102.451 E0.01767 ; perimeter
G1 X111.503 Y102.133 E0.02293 ; perimeter
G1 X111.402 Y101.970 E0.00887 ; perimeter
G1 X111.088 Y101.672 E0.02006 ; perimeter
G1 X110.865 Y101.572 E0.01129 ; perimeter
G1 X110.741 Y101.495 E0.00677 ; perimeter
G1 X110.474 Y101.260 E0.01650 ; perimeter
G1 X110.343 Y101.111 E0.00919 ; perimeter
G1 X110.248 Y100.965 E0.00804 ; perimeter
G1 X110.092 Y100.579 E0.01928 ; perimeter
G1 X109.946 Y99.675 E0.04243 ; perimeter
G1 X109.916 Y99.228 E0.02076 ; perimeter
G1 X109.801 Y99.061 E0.00937 ; perimeter
G1 X109.739 Y98.914 E0.00741 ; perimeter
G1 X109.399 Y98.607 E0.02122 ; perimeter
G1 X109.332 Y98.511 E0.00541 ; perimeter
G1 X109.092 Y98.278 E0.01549 ; perimeter
G1 X108.815 Y97.885 E0.02229 ; perimeter
G1 X108.460 Y97.556 E0.02242 ; perimeter
G1 X108.353 Y97.408 E0.00846 ; perimeter
G1 X108.353 Y97.347 E0.00282 ; perimeter
G1 X108.509 Y97.162 E0.01122 ; perimeter
G1 X108.851 Y96.989 E0.01771 ; perimeter
G1 X109.344 Y96.908 E0.02318 ; perimeter
G1 X109.703 Y96.979 E0.01695 ; perimeter
G1 X109.811 Y97.058 E0.00618 ; perimeter
G1 X109.868 Y97.136 E0.00447 ; perimeter
G1 X109.908 Y97.292 E0.00745 ; perimeter
G1 X109.954 Y97.628 E0.01571 ; perimeter
G1 X110.171 Y97.979 E0.01910 ; perimeter
G1 X110.532 Y98.300 E0.02239 ; perimeter
G1 X110.707 Y98.379 E0.00890 ; perimeter
G1 X110.822 Y98.597 E0.01142 ; perimeter
G1 X110.751 Y100.029 E0.06639 ; perimeter
G1 X110.774 Y100.505 E0.02208 ; perimeter
G1 X110.847 Y100.897 E0.01848 ; perimeter
G1 X111.030 Y101.334 E0.02193 ; perimeter
G1 X111.206 Y101.557 E0.01317 ; perimeter
G1 X111.567 Y101.886 E0.02260 ; perimeter
G1 X111.734 Y102.307 F10800.000 ; move inwards before travel
G1 X111.938 Y102.183 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.190086
G1 F2400.000
G1 X112.720 Y102.259 E0.00961 ; infill
G1 X112.720 Y102.202 F10800.000 ; move to first infill point
;WIDTH:0.390127
G1 F2400.000
G1 X112.516 Y102.198 E0.00591 ; infill
;WIDTH:0.380237
G1 X112.455 Y102.200 E0.00171 ; infill
;WIDTH:0.365497
G1 X112.003 Y102.238 E0.01214 ; infill
G1 X110.611 Y101.017 F10800.000 ; move to first infill point
;WIDTH:0.105729
G1 F2400.000
G1 X110.584 Y100.972 E0.00027 ; infill
;WIDTH:0.124738
G1 X110.568 Y100.940 E0.00024 ; infill
;WIDTH:0.173496
G1 X110.521 Y100.823 E0.00137 ; infill
;WIDTH:0.201897
G1 X110.481 Y100.687 E0.00188 ; infill
;WIDTH:0.233771
G1 X110.438 Y100.538 E0.00246 ; infill
;WIDTH:0.251508
G1 X110.427 Y100.486 E0.00092 ; infill
;WIDTH:0.277083
G1 X110.403 Y100.259 E0.00444 ; infill
;WIDTH:0.305305
G1 X110.378 Y100.017 E0.00531 ; infill
;WIDTH:0.35013
G1 X110.370 Y99.822 E0.00498 ; infill
;WIDTH:0.394955
G1 X110.361 Y99.628 E0.00571 ; infill
;WIDTH:0.424685
G1 X110.352 Y99.187 E0.01398 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.361 Y99.628 E-0.11621 ; wipe and retract
;WIPE_END
G1 E-2.28379 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X107.466 Y96.492 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.359 Y96.607 E0.00729 ; perimeter
G1 X107.195 Y96.697 E0.00867 ; perimeter
G1 X107.016 Y96.695 E0.00831 ; perimeter
G1 X106.847 Y96.648 E0.00812 ; perimeter
G1 X106.624 Y96.508 E0.01220 ; perimeter
G1 X106.499 Y96.395 E0.00781 ; perimeter
G1 X106.407 Y96.164 E0.01152 ; perimeter
G1 X106.507 Y95.950 E0.01097 ; perimeter
G1 X106.571 Y95.885 E0.00424 ; perimeter
G1 X106.888 Y95.802 E0.01516 ; perimeter
G1 X107.204 Y95.838 E0.01474 ; perimeter
G1 X107.409 Y95.958 E0.01096 ; perimeter
G1 X107.512 Y96.139 E0.00966 ; perimeter
G1 X107.536 Y96.334 E0.00909 ; perimeter
G1 X107.490 Y96.437 E0.00523 ; perimeter
G1 X107.309 Y96.489 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.359 Y96.607 E-0.05676 ; wipe and retract
G1 X107.195 Y96.697 E-0.04937 ; wipe and retract
G1 X107.016 Y96.695 E-0.04733 ; wipe and retract
G1 X106.847 Y96.648 E-0.04626 ; wipe and retract
G1 X106.624 Y96.508 E-0.06950 ; wipe and retract
G1 X106.499 Y96.395 E-0.04450 ; wipe and retract
G1 X106.407 Y96.164 E-0.06562 ; wipe and retract
G1 X106.507 Y95.950 E-0.06251 ; wipe and retract
G1 X106.571 Y95.885 E-0.02415 ; wipe and retract
G1 X106.888 Y95.802 E-0.08636 ; wipe and retract
G1 X107.204 Y95.838 E-0.08395 ; wipe and retract
G1 X107.409 Y95.958 E-0.06245 ; wipe and retract
G1 X107.512 Y96.139 E-0.05505 ; wipe and retract
G1 X107.536 Y96.334 E-0.05176 ; wipe and retract
G1 X107.490 Y96.437 E-0.02977 ; wipe and retract
;WIPE_END
G1 E-1.56467 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X103.770 Y95.007 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.702 Y95.066 E0.00420 ; perimeter
G1 X103.249 Y95.082 E0.02095 ; perimeter
G1 X103.011 Y94.962 E0.01237 ; perimeter
G1 X102.913 Y94.853 E0.00677 ; perimeter
G1 X102.898 Y94.762 E0.00430 ; perimeter
G1 X102.918 Y94.618 E0.00670 ; perimeter
G1 X103.075 Y94.397 E0.01261 ; perimeter
G1 X103.244 Y94.293 E0.00915 ; perimeter
G1 X103.395 Y94.265 E0.00711 ; perimeter
G1 X103.595 Y94.292 E0.00935 ; perimeter
G1 X103.744 Y94.382 E0.00804 ; perimeter
G1 X103.889 Y94.550 E0.01030 ; perimeter
G1 X103.878 Y94.810 E0.01206 ; perimeter
G1 X103.799 Y94.954 E0.00760 ; perimeter
G1 X103.680 Y94.995 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.702 Y95.066 E-0.03914 ; wipe and retract
G1 X103.249 Y95.082 E-0.11937 ; wipe and retract
G1 X103.011 Y94.962 E-0.07048 ; wipe and retract
G1 X102.913 Y94.853 E-0.03856 ; wipe and retract
G1 X102.898 Y94.762 E-0.02447 ; wipe and retract
G1 X102.918 Y94.618 E-0.03816 ; wipe and retract
G1 X103.075 Y94.397 E-0.07181 ; wipe and retract
G1 X103.244 Y94.293 E-0.05212 ; wipe and retract
G1 X103.395 Y94.265 E-0.04051 ; wipe and retract
G1 X103.595 Y94.292 E-0.05328 ; wipe and retract
G1 X103.744 Y94.382 E-0.04579 ; wipe and retract
G1 X103.889 Y94.550 E-0.05870 ; wipe and retract
G1 X103.878 Y94.810 E-0.06871 ; wipe and retract
G1 X103.799 Y94.954 E-0.04329 ; wipe and retract
;WIPE_END
G1 E-1.63561 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X101.059 Y94.962 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.036 Y95.019 E0.00281 ; perimeter
G1 X100.756 Y95.235 E0.01638 ; perimeter
G1 X100.149 Y95.441 E0.02972 ; perimeter
G1 X99.850 Y95.471 E0.01389 ; perimeter
G1 X99.730 Y95.599 E0.00815 ; perimeter
G1 X99.517 Y95.715 E0.01121 ; perimeter
G1 X99.293 Y96.349 E0.03116 ; perimeter
G1 X99.223 Y96.791 E0.02074 ; perimeter
G1 X99.193 Y97.282 E0.02278 ; perimeter
G1 X99.157 Y97.521 E0.01118 ; perimeter
G1 X99.159 Y97.923 E0.01861 ; perimeter
G1 X99.044 Y98.643 E0.03378 ; perimeter
G1 X99.131 Y98.897 E0.01245 ; perimeter
G1 X99.208 Y99.243 E0.01641 ; perimeter
G1 X99.248 Y99.593 E0.01630 ; perimeter
G1 X99.221 Y100.066 E0.02195 ; perimeter
G1 X99.110 Y100.314 E0.01261 ; perimeter
G1 X98.995 Y100.402 E0.00673 ; perimeter
G1 X98.935 Y100.410 E0.00276 ; perimeter
G1 X98.819 Y100.356 E0.00597 ; perimeter
G1 X98.669 Y100.199 E0.01005 ; perimeter
G1 X98.592 Y99.963 E0.01149 ; perimeter
G1 X98.567 Y99.525 E0.02031 ; perimeter
G1 X98.657 Y98.874 E0.03044 ; perimeter
G1 X98.597 Y98.181 E0.03223 ; perimeter
G1 X98.526 Y98.060 E0.00648 ; perimeter
G1 X98.482 Y97.916 E0.00695 ; perimeter
G1 X98.434 Y97.677 E0.01132 ; perimeter
G1 X98.408 Y97.298 E0.01759 ; perimeter
G1 X98.378 Y97.147 E0.00714 ; perimeter
G1 X98.414 Y96.589 E0.02591 ; perimeter
G1 X98.690 Y95.981 E0.03090 ; perimeter
G1 X99.063 Y95.564 E0.02593 ; perimeter
G1 X99.183 Y95.508 E0.00611 ; perimeter
G1 X99.272 Y95.330 E0.00924 ; perimeter
G1 X99.536 Y95.008 E0.01929 ; perimeter
G1 X99.560 Y94.945 E0.00313 ; perimeter
G1 X99.811 Y94.707 E0.01599 ; perimeter
G1 X100.029 Y94.618 E0.01091 ; perimeter
G1 X100.391 Y94.564 E0.01698 ; perimeter
G1 X100.534 Y94.568 E0.00659 ; perimeter
G1 X100.907 Y94.679 E0.01804 ; perimeter
G1 X100.998 Y94.767 E0.00590 ; perimeter
G1 X101.041 Y94.905 E0.00669 ; perimeter
G1 X101.004 Y94.988 F10800.000 ; move inwards before travel
G1 X100.779 Y94.892 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.326168
G1 F2400.000
G1 X100.415 Y94.947 E0.00869 ; infill
G1 X99.750 Y95.120 E0.01617 ; infill
G1 X100.203 Y94.836 F10800.000 ; move to first infill point
;WIDTH:0.115057
G1 F2400.000
G1 X99.714 Y95.219 E0.00373 ; infill
;WIDTH:0.104558
G1 X99.623 Y95.323 E0.00071 ; infill
G1 X99.622 Y95.283 F10800.000 ; move to first infill point
;WIDTH:0.191318
G1 F2400.000
G1 X99.815 Y95.157 E0.00284 ; infill
;WIDTH:0.228797
G1 X100.248 Y94.829 E0.00839 ; infill
G1 X99.209 Y95.799 F10800.000 ; move to first infill point
;WIDTH:0.128974
G1 F2400.000
G1 X99.079 Y96.010 E0.00177 ; infill
;WIDTH:0.227099
G1 X98.977 Y96.195 E0.00324 ; infill
G1 X98.905 Y96.411 E0.00349 ; infill
;WIDTH:0.34668
G1 X98.816 Y96.739 E0.00857 ; infill
G1 X98.790 Y97.485 E0.01886 ; infill
;WIDTH:0.297279
G1 X98.795 Y97.628 E0.00304 ; infill
;WIDTH:0.286354
G1 X98.815 Y97.832 E0.00415 ; infill
;WIDTH:0.246826
G1 X98.825 Y97.897 E0.00111 ; infill
;WIDTH:0.227605
G1 X98.841 Y98.128 E0.00355 ; infill
G1 X98.897 Y99.057 F10800.000 ; move to first infill point
;WIDTH:0.133977
G1 F2400.000
G1 X98.902 Y99.175 E0.00090 ; infill
;WIDTH:0.171034
G1 X98.907 Y99.294 E0.00126 ; infill
;WIDTH:0.2016
G1 X98.910 Y99.903 E0.00804 ; infill
G1 X98.937 Y100.112 E0.00278 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.910 Y99.903 E-0.05562 ; wipe and retract
G1 X98.907 Y99.294 E-0.16081 ; wipe and retract
;WIPE_END
G1 E-2.18357 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X100.522 Y103.298 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.716 Y103.247 E0.00933 ; perimeter
G1 X100.959 Y103.261 E0.01125 ; perimeter
G1 X101.210 Y103.391 E0.01311 ; perimeter
G1 X101.361 Y103.655 E0.01407 ; perimeter
G1 X101.346 Y103.898 E0.01130 ; perimeter
G1 X101.213 Y104.188 E0.01478 ; perimeter
G1 X101.086 Y104.284 E0.00739 ; perimeter
G1 X100.974 Y104.283 E0.00517 ; perimeter
G1 X100.672 Y104.103 E0.01628 ; perimeter
G1 X100.401 Y103.652 E0.02437 ; perimeter
G1 X100.413 Y103.450 E0.00935 ; perimeter
G1 X100.435 Y103.358 E0.00440 ; perimeter
G1 X100.472 Y103.332 E0.00208 ; perimeter
G1 X100.692 Y103.405 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.716 Y103.247 E-0.06826 ; wipe and retract
G1 X100.959 Y103.261 E-0.06410 ; wipe and retract
G1 X101.210 Y103.391 E-0.07469 ; wipe and retract
G1 X101.361 Y103.655 E-0.08013 ; wipe and retract
G1 X101.346 Y103.898 E-0.06438 ; wipe and retract
G1 X101.213 Y104.188 E-0.08420 ; wipe and retract
G1 X101.086 Y104.284 E-0.04209 ; wipe and retract
G1 X100.974 Y104.283 E-0.02943 ; wipe and retract
G1 X100.672 Y104.103 E-0.09277 ; wipe and retract
G1 X100.401 Y103.652 E-0.13884 ; wipe and retract
G1 X100.413 Y103.450 E-0.05329 ; wipe and retract
G1 X100.435 Y103.358 E-0.02507 ; wipe and retract
G1 X100.472 Y103.332 E-0.01183 ; wipe and retract
;WIPE_END
G1 E-1.57092 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X105.028 Y106.434 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.190 Y106.464 E0.00763 ; perimeter
G1 X105.340 Y106.536 E0.00772 ; perimeter
G1 X105.635 Y106.777 E0.01765 ; perimeter
G1 X105.724 Y106.919 E0.00775 ; perimeter
G1 X106.479 Y107.441 E0.04254 ; perimeter
G1 X106.710 Y107.638 E0.01405 ; perimeter
G1 X106.959 Y107.798 E0.01372 ; perimeter
G1 X107.108 Y107.921 E0.00891 ; perimeter
G1 X107.429 Y108.289 E0.02262 ; perimeter
G1 X107.537 Y108.547 E0.01297 ; perimeter
G1 X107.566 Y108.692 E0.00683 ; perimeter
G1 X107.558 Y108.907 E0.00999 ; perimeter
G1 X107.507 Y109.046 E0.00687 ; perimeter
G1 X107.416 Y109.137 E0.00599 ; perimeter
G1 X107.301 Y109.157 E0.00540 ; perimeter
G1 X107.042 Y109.055 E0.01290 ; perimeter
G1 X106.906 Y108.900 E0.00954 ; perimeter
G1 X106.711 Y108.735 E0.01183 ; perimeter
G1 X105.906 Y107.924 E0.05293 ; perimeter
G1 X105.442 Y107.561 E0.02728 ; perimeter
G1 X105.077 Y107.330 E0.02002 ; perimeter
G1 X104.915 Y107.306 E0.00758 ; perimeter
G1 X104.690 Y107.153 E0.01260 ; perimeter
G1 X104.571 Y106.971 E0.01008 ; perimeter
G1 X104.561 Y106.756 E0.00998 ; perimeter
G1 X104.657 Y106.569 E0.00973 ; perimeter
G1 X104.865 Y106.447 E0.01117 ; perimeter
G1 X104.968 Y106.439 E0.00479 ; perimeter
G1 X105.109 Y106.577 F10800.000 ; move inwards before travel
G1 X104.907 Y106.702 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.248541
G1 F2400.000
G1 X105.485 Y107.177 E0.01279 ; infill
G1 X105.645 Y107.283 E0.00328 ; infill
;WIDTH:0.287602
G1 X106.153 Y107.658 E0.01285 ; infill
;WIDTH:0.310953
G1 X106.250 Y107.739 E0.00282 ; infill
;WIDTH:0.338999
G1 X106.486 Y107.956 E0.00789 ; infill
;WIDTH:0.370417
G1 X106.598 Y108.047 E0.00394 ; infill
;WIDTH:0.397379
G1 X106.809 Y108.228 E0.00817 ; infill
G1 X107.322 Y108.751 E0.02161 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.809 Y108.228 E-0.19345 ; wipe and retract
G1 X106.598 Y108.047 E-0.07313 ; wipe and retract
;WIPE_END
G1 E-2.13342 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X108.581 Y112.966 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.632 Y112.938 E0.00267 ; perimeter
G1 X108.884 Y112.908 E0.01177 ; perimeter
G1 X109.138 Y112.987 E0.01232 ; perimeter
G1 X109.277 Y113.058 E0.00723 ; perimeter
G1 X109.456 Y113.250 E0.01218 ; perimeter
G1 X109.537 Y113.428 E0.00906 ; perimeter
G1 X109.833 Y113.812 E0.02245 ; perimeter
G1 X111.062 Y115.044 E0.08061 ; perimeter
G1 X111.578 Y115.378 E0.02847 ; perimeter
G1 X111.674 Y115.384 E0.00444 ; perimeter
G1 X111.814 Y115.502 E0.00850 ; perimeter
G1 X111.907 Y115.718 E0.01089 ; perimeter
G1 X111.861 Y115.956 E0.01122 ; perimeter
G1 X111.744 Y116.091 E0.00829 ; perimeter
G1 X111.541 Y116.149 E0.00977 ; perimeter
G1 X111.412 Y116.143 E0.00599 ; perimeter
G1 X111.226 Y116.074 E0.00920 ; perimeter
G1 X110.991 Y115.868 E0.01450 ; perimeter
G1 X110.892 Y115.699 E0.00908 ; perimeter
G1 X110.518 Y115.318 E0.02472 ; perimeter
G1 X110.052 Y114.928 E0.02815 ; perimeter
G1 X109.125 Y114.079 E0.05824 ; perimeter
G1 X108.967 Y113.977 E0.00868 ; perimeter
G1 X108.647 Y113.598 E0.02299 ; perimeter
G1 X108.528 Y113.355 E0.01254 ; perimeter
G1 X108.493 Y113.191 E0.00774 ; perimeter
G1 X108.498 Y113.123 E0.00316 ; perimeter
G1 X108.551 Y113.018 E0.00547 ; perimeter
G1 X108.636 Y112.983 F10800.000 ; move inwards before travel
G1 X108.786 Y113.162 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350274
G1 F2400.000
G1 X109.103 Y113.488 E0.01160 ; infill
G1 X109.207 Y113.648 E0.00487 ; infill
G1 X109.286 Y113.728 E0.00289 ; infill
;WIDTH:0.236365
G1 X109.583 Y114.040 E0.00692 ; infill
G1 X110.261 Y114.689 E0.01510 ; infill
;WIDTH:0.142418
G1 X110.883 Y115.274 E0.00706 ; infill
;WIDTH:0.179967
G1 X111.015 Y115.382 E0.00195 ; infill
;WIDTH:0.217517
G1 X111.147 Y115.490 E0.00248 ; infill
;WIDTH:0.225176
G1 X111.577 Y115.888 E0.00888 ; infill
G1 X111.623 Y115.669 F10800.000 ; move to first infill point
;WIDTH:0.332019
G1 F2400.000
G1 X111.501 Y115.760 E0.00366 ; infill
G1 X111.426 Y115.738 E0.00188 ; infill
G1 X110.814 Y115.276 E0.01844 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.426 Y115.738 E-0.20241 ; wipe and retract
G1 X111.501 Y115.760 E-0.02062 ; wipe and retract
G1 X111.623 Y115.669 E-0.04013 ; wipe and retract
;WIPE_END
G1 E-2.13684 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X114.339 Y115.534 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.369 Y115.401 E0.00631 ; perimeter
G1 X114.526 Y115.194 E0.01201 ; perimeter
G1 X114.794 Y114.954 E0.01669 ; perimeter
G1 X114.955 Y114.780 E0.01101 ; perimeter
G1 X115.219 Y114.578 E0.01537 ; perimeter
G1 X115.330 Y114.539 E0.00546 ; perimeter
G1 X115.432 Y114.541 E0.00474 ; perimeter
G1 X115.633 Y114.638 E0.01033 ; perimeter
G1 X115.768 Y114.822 E0.01057 ; perimeter
G1 X115.787 Y114.968 E0.00682 ; perimeter
G1 X115.745 Y115.122 E0.00740 ; perimeter
G1 X115.595 Y115.319 E0.01145 ; perimeter
G1 X115.311 Y115.571 E0.01761 ; perimeter
G1 X115.103 Y115.798 E0.01426 ; perimeter
G1 X114.893 Y115.954 E0.01211 ; perimeter
G1 X114.722 Y116.005 E0.00829 ; perimeter
G1 X114.659 Y116.000 E0.00292 ; perimeter
G1 X114.462 Y115.887 E0.01052 ; perimeter
G1 X114.350 Y115.693 E0.01036 ; perimeter
G1 X114.343 Y115.594 E0.00463 ; perimeter
G1 X114.459 Y115.470 F10800.000 ; move inwards before travel
G1 X114.726 Y115.611 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31156
G1 F2400.000
G1 X114.731 Y115.751 E0.00314 ; infill
G1 X114.726 Y115.611 F10800.000 ; move to first infill point
;WIDTH:0.33472
G1 F2400.000
G1 X114.731 Y115.593 E0.00044 ; infill
;WIDTH:0.366273
G1 X114.761 Y115.543 E0.00157 ; infill
G1 X115.082 Y115.236 E0.01195 ; infill
;WIDTH:0.383204
G1 X115.374 Y114.955 E0.01146 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.082 Y115.236 E-0.10688 ; wipe and retract
;WIPE_END
G1 E-2.29312 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X115.441 Y112.788 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.320 Y112.732 E0.00619 ; perimeter
G1 X115.239 Y112.640 E0.00569 ; perimeter
G1 X115.181 Y112.495 E0.00720 ; perimeter
G1 X115.159 Y112.339 E0.00729 ; perimeter
G1 X115.171 Y112.174 E0.00770 ; perimeter
G1 X115.221 Y112.041 E0.00656 ; perimeter
G1 X115.273 Y111.972 E0.00401 ; perimeter
G1 X115.443 Y111.878 E0.00896 ; perimeter
G1 X115.558 Y111.871 E0.00535 ; perimeter
G1 X115.722 Y111.925 E0.00799 ; perimeter
G1 X115.765 Y111.960 E0.00259 ; perimeter
G1 X115.812 Y112.028 E0.00385 ; perimeter
G1 X115.887 Y112.326 E0.01423 ; perimeter
G1 X115.833 Y112.483 E0.00766 ; perimeter
G1 X115.827 Y112.566 E0.00387 ; perimeter
G1 X115.761 Y112.675 E0.00590 ; perimeter
G1 X115.674 Y112.741 E0.00506 ; perimeter
G1 X115.500 Y112.776 E0.00820 ; perimeter
G1 X115.396 Y112.662 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.320 Y112.732 E-0.04891 ; wipe and retract
G1 X115.239 Y112.640 E-0.03243 ; wipe and retract
G1 X115.181 Y112.495 E-0.04102 ; wipe and retract
G1 X115.159 Y112.339 E-0.04153 ; wipe and retract
G1 X115.171 Y112.174 E-0.04386 ; wipe and retract
G1 X115.221 Y112.041 E-0.03737 ; wipe and retract
G1 X115.273 Y111.972 E-0.02284 ; wipe and retract
G1 X115.443 Y111.878 E-0.05107 ; wipe and retract
G1 X115.558 Y111.871 E-0.03046 ; wipe and retract
G1 X115.722 Y111.925 E-0.04550 ; wipe and retract
G1 X115.765 Y111.960 E-0.01476 ; wipe and retract
G1 X115.812 Y112.028 E-0.02192 ; wipe and retract
G1 X115.887 Y112.326 E-0.08104 ; wipe and retract
G1 X115.833 Y112.483 E-0.04361 ; wipe and retract
G1 X115.827 Y112.566 E-0.02203 ; wipe and retract
G1 X115.761 Y112.675 E-0.03362 ; wipe and retract
G1 X115.674 Y112.741 E-0.02883 ; wipe and retract
G1 X115.500 Y112.776 E-0.04672 ; wipe and retract
;WIPE_END
G1 E-1.71247 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 X115.529 Y105.809 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.396 Y105.792 E0.00621 ; perimeter
G1 X115.282 Y105.747 E0.00569 ; perimeter
G1 X115.235 Y105.704 E0.00294 ; perimeter
G1 X115.140 Y105.509 E0.01001 ; perimeter
G1 X115.143 Y105.303 E0.00957 ; perimeter
G1 X115.223 Y105.128 E0.00889 ; perimeter
G1 X115.325 Y105.037 E0.00637 ; perimeter
G1 X115.409 Y105.006 E0.00410 ; perimeter
G1 X115.531 Y104.993 E0.00568 ; perimeter
G1 X115.657 Y105.025 E0.00603 ; perimeter
G1 X115.797 Y105.114 E0.00770 ; perimeter
G1 X115.846 Y105.180 E0.00380 ; perimeter
G1 X115.885 Y105.299 E0.00579 ; perimeter
G1 X115.894 Y105.452 E0.00711 ; perimeter
G1 X115.873 Y105.566 E0.00534 ; perimeter
G1 X115.825 Y105.660 E0.00489 ; perimeter
G1 X115.682 Y105.779 E0.00861 ; perimeter
G1 X115.588 Y105.800 E0.00448 ; perimeter
G1 X115.454 Y105.698 F10800.000 ; move inwards before travel
G1 X115.510 Y105.352 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.303498
G1 F2400.000
G1 X115.516 Y105.430 E0.00168 ; infill
;LAYER_CHANGE
;Z:14.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;14.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y105.352 E-0.02043 ; wipe and retract
;WIPE_END
G1 E-2.37957 F2400.000 ; retract
G1 Z14.075 F10800.000 ; lift Z
G1 Z14.200 ; move to next layer (70)
;AFTER_LAYER_CHANGE
;14.2
G1 X115.180 Y105.206 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.224 Y105.107 E0.00503 ; perimeter
G1 X115.338 Y105.007 E0.00702 ; perimeter
G1 X115.554 Y104.976 E0.01013 ; perimeter
G1 X115.683 Y105.013 E0.00620 ; perimeter
G1 X115.799 Y105.095 E0.00654 ; perimeter
G1 X115.872 Y105.220 E0.00674 ; perimeter
G1 X115.894 Y105.424 E0.00952 ; perimeter
G1 X115.871 Y105.549 E0.00588 ; perimeter
G1 X115.824 Y105.640 E0.00474 ; perimeter
G1 X115.653 Y105.770 E0.00998 ; perimeter
G1 X115.530 Y105.788 E0.00575 ; perimeter
G1 X115.335 Y105.752 E0.00919 ; perimeter
G1 X115.239 Y105.680 E0.00557 ; perimeter
G1 X115.153 Y105.528 E0.00807 ; perimeter
G1 X115.139 Y105.298 E0.01068 ; perimeter
G1 X115.155 Y105.261 E0.00187 ; perimeter
G1 X115.286 Y105.183 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.224 Y105.107 E-0.04449 ; wipe and retract
G1 X115.338 Y105.007 E-0.03998 ; wipe and retract
G1 X115.554 Y104.976 E-0.05771 ; wipe and retract
G1 X115.683 Y105.013 E-0.03532 ; wipe and retract
G1 X115.799 Y105.095 E-0.03728 ; wipe and retract
G1 X115.872 Y105.220 E-0.03838 ; wipe and retract
G1 X115.894 Y105.424 E-0.05422 ; wipe and retract
G1 X115.871 Y105.549 E-0.03349 ; wipe and retract
G1 X115.824 Y105.640 E-0.02702 ; wipe and retract
G1 X115.653 Y105.770 E-0.05687 ; wipe and retract
G1 X115.530 Y105.788 E-0.03276 ; wipe and retract
G1 X115.335 Y105.752 E-0.05236 ; wipe and retract
G1 X115.239 Y105.680 E-0.03173 ; wipe and retract
G1 X115.153 Y105.528 E-0.04598 ; wipe and retract
G1 X115.139 Y105.298 E-0.06085 ; wipe and retract
G1 X115.155 Y105.261 E-0.01067 ; wipe and retract
;WIPE_END
G1 E-1.74090 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X113.323 Y102.233 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.964 Y102.159 E0.01241 ; perimeter
G1 X113.128 Y102.075 E0.00625 ; perimeter
G1 X113.276 Y102.195 E0.00645 ; perimeter
G1 X111.997 Y102.198 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.007 Y102.166 E0.00157 ; perimeter
G1 X112.217 Y102.009 E0.01211 ; perimeter
G1 X112.255 Y101.940 E0.00366 ; perimeter
G1 X112.407 Y101.854 E0.00809 ; perimeter
G1 X112.561 Y101.789 E0.00775 ; perimeter
G1 X112.659 Y101.773 E0.00462 ; perimeter
G1 X113.052 Y101.573 E0.02041 ; perimeter
G1 X113.294 Y101.607 E0.01132 ; perimeter
G1 X113.438 Y101.684 E0.00757 ; perimeter
G1 X113.469 Y101.731 E0.00259 ; perimeter
G1 X113.739 Y101.950 E0.01611 ; perimeter
G1 X113.907 Y102.256 E0.01618 ; perimeter
G1 X113.949 Y102.466 E0.00992 ; perimeter
G1 X113.937 Y102.561 E0.00446 ; perimeter
G1 X113.889 Y102.678 E0.00584 ; perimeter
G1 X113.796 Y102.773 E0.00618 ; perimeter
G1 X113.582 Y102.819 E0.01014 ; perimeter
G1 X113.317 Y102.724 E0.01305 ; perimeter
G1 X112.347 Y102.513 E0.04598 ; perimeter
G1 X112.190 Y102.439 E0.00804 ; perimeter
G1 X112.053 Y102.324 E0.00829 ; perimeter
G1 X112.021 Y102.253 E0.00362 ; perimeter
G1 X112.026 Y102.180 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.007 Y102.166 E-0.02325 ; wipe and retract
G1 X112.217 Y102.009 E-0.06899 ; wipe and retract
G1 X112.255 Y101.940 E-0.02082 ; wipe and retract
G1 X112.407 Y101.854 E-0.04609 ; wipe and retract
G1 X112.561 Y101.789 E-0.04415 ; wipe and retract
G1 X112.659 Y101.773 E-0.02630 ; wipe and retract
G1 X113.052 Y101.573 E-0.11629 ; wipe and retract
G1 X113.294 Y101.607 E-0.06451 ; wipe and retract
G1 X113.438 Y101.684 E-0.04313 ; wipe and retract
G1 X113.469 Y101.731 E-0.01475 ; wipe and retract
G1 X113.739 Y101.950 E-0.09176 ; wipe and retract
G1 X113.907 Y102.256 E-0.09218 ; wipe and retract
G1 X113.949 Y102.466 E-0.05649 ; wipe and retract
G1 X113.937 Y102.561 E-0.02539 ; wipe and retract
G1 X113.889 Y102.678 E-0.03324 ; wipe and retract
G1 X113.796 Y102.773 E-0.03521 ; wipe and retract
G1 X113.582 Y102.819 E-0.05774 ; wipe and retract
G1 X113.317 Y102.724 E-0.07433 ; wipe and retract
G1 X112.347 Y102.513 E-0.26194 ; wipe and retract
G1 X112.190 Y102.439 E-0.04581 ; wipe and retract
G1 X112.053 Y102.324 E-0.04724 ; wipe and retract
G1 X112.021 Y102.253 E-0.02062 ; wipe and retract
;WIPE_END
G1 E-1.08978 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X110.370 Y98.963 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.273 Y98.813 E0.00602 ; perimeter
G1 X110.168 Y98.563 E0.00920 ; perimeter
G1 X109.965 Y98.380 E0.00926 ; perimeter
G1 X109.885 Y98.256 E0.00499 ; perimeter
G1 X110.155 Y98.467 E0.01162 ; perimeter
G1 X110.494 Y98.623 E0.01261 ; perimeter
G1 X110.473 Y98.748 E0.00428 ; perimeter
G1 X110.396 Y98.909 E0.00603 ; perimeter
G1 X109.826 Y98.167 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X109.474 Y97.625 E0.02188 ; perimeter
G1 X109.292 Y97.421 E0.00925 ; perimeter
G1 X109.340 Y97.382 E0.00210 ; perimeter
G1 X109.528 Y97.345 E0.00647 ; perimeter
G1 X109.586 Y97.356 E0.00201 ; perimeter
G1 X109.635 Y97.668 E0.01067 ; perimeter
G1 X109.805 Y98.111 E0.01605 ; perimeter
G1 X110.253 Y97.932 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.408 Y98.053 E0.00912 ; perimeter
G1 X110.894 Y98.277 E0.02480 ; perimeter
G1 X110.982 Y98.399 E0.00698 ; perimeter
G1 X111.014 Y98.524 E0.00598 ; perimeter
G1 X110.945 Y98.879 E0.01676 ; perimeter
G1 X110.809 Y99.162 E0.01454 ; perimeter
G1 X110.628 Y100.439 E0.05972 ; perimeter
G1 X110.575 Y100.919 E0.02237 ; perimeter
G1 X110.592 Y100.983 E0.00308 ; perimeter
G1 X110.534 Y100.959 E0.00291 ; perimeter
G1 X110.419 Y100.777 E0.00995 ; perimeter
G1 X110.300 Y100.662 E0.00766 ; perimeter
G1 X110.169 Y100.354 E0.01548 ; perimeter
G1 X110.068 Y100.033 E0.01561 ; perimeter
G1 X109.980 Y99.571 E0.02178 ; perimeter
G1 X109.941 Y99.188 E0.01786 ; perimeter
G1 X109.846 Y99.040 E0.00816 ; perimeter
G1 X109.765 Y98.849 E0.00960 ; perimeter
G1 X109.595 Y98.695 E0.01061 ; perimeter
G1 X109.090 Y97.919 E0.04292 ; perimeter
G1 X108.693 Y97.474 E0.02762 ; perimeter
G1 X108.646 Y97.394 E0.00427 ; perimeter
G1 X108.766 Y97.196 E0.01073 ; perimeter
G1 X108.865 Y97.146 E0.00513 ; perimeter
G1 X109.131 Y96.932 E0.01579 ; perimeter
G1 X109.488 Y96.861 E0.01689 ; perimeter
G1 X109.603 Y96.865 E0.00531 ; perimeter
G1 X109.873 Y96.929 E0.01287 ; perimeter
G1 X110.025 Y97.046 E0.00889 ; perimeter
G1 X110.103 Y97.543 E0.02326 ; perimeter
G1 X110.231 Y97.876 E0.01652 ; perimeter
G1 X110.184 Y98.116 F10800.000 ; move inwards before travel
G1 X110.367 Y99.587 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31631
G1 F2400.000
G1 X110.372 Y99.793 E0.00469 ; infill
;WIDTH:0.275941
G1 X110.377 Y99.999 E0.00400 ; infill
;WIDTH:0.235572
G1 X110.382 Y100.206 E0.00330 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.377 Y99.999 E-0.05444 ; wipe and retract
;WIPE_END
G1 E-2.34556 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X107.474 Y96.555 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.305 Y96.654 E0.00909 ; perimeter
G1 X107.104 Y96.661 E0.00929 ; perimeter
G1 X106.882 Y96.585 E0.01089 ; perimeter
G1 X106.648 Y96.416 E0.01339 ; perimeter
G1 X106.601 Y96.322 E0.00486 ; perimeter
G1 X106.565 Y96.202 E0.00580 ; perimeter
G1 X106.616 Y96.024 E0.00855 ; perimeter
G1 X106.731 Y95.910 E0.00749 ; perimeter
G1 X106.994 Y95.805 E0.01312 ; perimeter
G1 X107.286 Y95.830 E0.01360 ; perimeter
G1 X107.574 Y95.988 E0.01519 ; perimeter
G1 X107.634 Y96.109 E0.00626 ; perimeter
G1 X107.634 Y96.285 E0.00813 ; perimeter
G1 X107.587 Y96.452 E0.00803 ; perimeter
G1 X107.518 Y96.514 E0.00431 ; perimeter
G1 X107.289 Y96.488 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.305 Y96.654 E-0.06735 ; wipe and retract
G1 X107.104 Y96.661 E-0.05294 ; wipe and retract
G1 X106.882 Y96.585 E-0.06206 ; wipe and retract
G1 X106.648 Y96.416 E-0.07625 ; wipe and retract
G1 X106.601 Y96.322 E-0.02766 ; wipe and retract
G1 X106.565 Y96.202 E-0.03306 ; wipe and retract
G1 X106.616 Y96.024 E-0.04873 ; wipe and retract
G1 X106.731 Y95.910 E-0.04266 ; wipe and retract
G1 X106.994 Y95.805 E-0.07472 ; wipe and retract
G1 X107.286 Y95.830 E-0.07750 ; wipe and retract
G1 X107.574 Y95.988 E-0.08655 ; wipe and retract
G1 X107.634 Y96.109 E-0.03566 ; wipe and retract
G1 X107.634 Y96.285 E-0.04630 ; wipe and retract
G1 X107.587 Y96.452 E-0.04573 ; wipe and retract
G1 X107.518 Y96.514 E-0.02456 ; wipe and retract
;WIPE_END
G1 E-1.59828 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X103.794 Y94.927 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.677 Y94.995 E0.00625 ; perimeter
G1 X103.309 Y95.026 E0.01711 ; perimeter
G1 X103.017 Y94.883 E0.01506 ; perimeter
G1 X102.960 Y94.784 E0.00532 ; perimeter
G1 X103.026 Y94.495 E0.01372 ; perimeter
G1 X103.083 Y94.385 E0.00574 ; perimeter
G1 X103.259 Y94.253 E0.01019 ; perimeter
G1 X103.393 Y94.225 E0.00633 ; perimeter
G1 X103.588 Y94.242 E0.00908 ; perimeter
G1 X103.766 Y94.335 E0.00929 ; perimeter
G1 X103.867 Y94.482 E0.00827 ; perimeter
G1 X103.893 Y94.582 E0.00478 ; perimeter
G1 X103.864 Y94.798 E0.01010 ; perimeter
G1 X103.823 Y94.874 E0.00404 ; perimeter
G1 X103.664 Y94.892 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.677 Y94.995 E-0.04982 ; wipe and retract
G1 X103.309 Y95.026 E-0.09747 ; wipe and retract
G1 X103.017 Y94.883 E-0.08578 ; wipe and retract
G1 X102.960 Y94.784 E-0.03029 ; wipe and retract
G1 X103.026 Y94.495 E-0.07817 ; wipe and retract
G1 X103.083 Y94.385 E-0.03267 ; wipe and retract
G1 X103.259 Y94.253 E-0.05803 ; wipe and retract
G1 X103.393 Y94.225 E-0.03607 ; wipe and retract
G1 X103.588 Y94.242 E-0.05172 ; wipe and retract
G1 X103.766 Y94.335 E-0.05290 ; wipe and retract
G1 X103.867 Y94.482 E-0.04711 ; wipe and retract
G1 X103.893 Y94.582 E-0.02723 ; wipe and retract
G1 X103.864 Y94.798 E-0.05752 ; wipe and retract
G1 X103.823 Y94.874 E-0.02304 ; wipe and retract
;WIPE_END
G1 E-1.67218 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X98.908 Y98.999 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.088 Y99.166 E0.01136 ; perimeter
G1 X99.125 Y99.301 E0.00652 ; perimeter
G1 X99.193 Y99.429 E0.00669 ; perimeter
G1 X99.253 Y99.696 E0.01268 ; perimeter
G1 X99.263 Y100.053 E0.01654 ; perimeter
G1 X99.242 Y100.292 E0.01113 ; perimeter
G1 X99.137 Y100.555 E0.01313 ; perimeter
G1 X98.994 Y100.661 E0.00823 ; perimeter
G1 X98.814 Y100.563 E0.00949 ; perimeter
G1 X98.673 Y100.403 E0.00987 ; perimeter
G1 X98.594 Y100.152 E0.01221 ; perimeter
G1 X98.583 Y99.678 E0.02193 ; perimeter
G1 X98.682 Y99.362 E0.01534 ; perimeter
G1 X98.696 Y99.247 E0.00538 ; perimeter
G1 X98.731 Y99.171 E0.00386 ; perimeter
G1 X98.885 Y98.984 E0.01126 ; perimeter
G1 X98.984 Y99.232 F10800.000 ; move inwards before travel
G1 X98.840 Y98.370 ; move to first perimeter point
G1 F1800.000
G1 X98.833 Y98.306 E0.00299 ; perimeter
G1 X98.615 Y97.898 E0.02141 ; perimeter
G1 X98.469 Y97.414 E0.02340 ; perimeter
G1 X98.429 Y97.352 E0.00345 ; perimeter
G1 X98.379 Y96.992 E0.01685 ; perimeter
G1 X98.394 Y96.674 E0.01472 ; perimeter
G1 X98.487 Y96.416 E0.01271 ; perimeter
G1 X98.634 Y96.141 E0.01444 ; perimeter
G1 X98.792 Y96.003 E0.00970 ; perimeter
G1 X99.000 Y95.874 E0.01135 ; perimeter
G1 X99.365 Y95.707 E0.01863 ; perimeter
G1 X99.214 Y95.920 E0.01211 ; perimeter
G1 X99.290 Y96.308 E0.01833 ; perimeter
G1 X99.241 Y96.520 E0.01007 ; perimeter
G1 X99.158 Y97.379 E0.03996 ; perimeter
G1 X99.145 Y97.434 E0.00261 ; perimeter
G1 X99.066 Y97.551 E0.00655 ; perimeter
G1 X99.010 Y97.912 E0.01695 ; perimeter
G1 X98.963 Y97.971 E0.00349 ; perimeter
G1 X98.858 Y98.312 E0.01653 ; perimeter
G1 X98.843 Y98.305 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.833 Y98.306 E-0.00674 ; wipe and retract
G1 X98.615 Y97.898 E-0.12194 ; wipe and retract
G1 X98.469 Y97.414 E-0.13331 ; wipe and retract
G1 X98.429 Y97.352 E-0.01965 ; wipe and retract
G1 X98.379 Y96.992 E-0.09599 ; wipe and retract
G1 X98.394 Y96.674 E-0.08387 ; wipe and retract
G1 X98.487 Y96.416 E-0.07242 ; wipe and retract
G1 X98.634 Y96.141 E-0.08226 ; wipe and retract
G1 X98.792 Y96.003 E-0.05527 ; wipe and retract
G1 X99.000 Y95.874 E-0.06464 ; wipe and retract
G1 X99.365 Y95.707 E-0.10614 ; wipe and retract
G1 X99.214 Y95.920 E-0.06898 ; wipe and retract
G1 X99.290 Y96.308 E-0.10441 ; wipe and retract
G1 X99.241 Y96.520 E-0.05736 ; wipe and retract
G1 X99.158 Y97.379 E-0.22764 ; wipe and retract
G1 X99.145 Y97.434 E-0.01487 ; wipe and retract
G1 X99.066 Y97.551 E-0.03731 ; wipe and retract
G1 X99.010 Y97.912 E-0.09655 ; wipe and retract
G1 X98.963 Y97.971 E-0.01987 ; wipe and retract
G1 X98.858 Y98.312 E-0.09419 ; wipe and retract
;WIPE_END
G1 E-0.83656 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X99.825 Y95.423 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.646 Y95.361 E0.00877 ; perimeter
G1 X99.635 Y95.064 E0.01373 ; perimeter
G1 X99.731 Y94.820 E0.01220 ; perimeter
G1 X99.882 Y94.681 E0.00948 ; perimeter
G1 X100.066 Y94.606 E0.00919 ; perimeter
G1 X100.382 Y94.567 E0.01474 ; perimeter
G1 X100.503 Y94.580 E0.00562 ; perimeter
G1 X100.771 Y94.723 E0.01411 ; perimeter
G1 X100.841 Y94.851 E0.00676 ; perimeter
G1 X100.817 Y95.025 E0.00812 ; perimeter
G1 X100.650 Y95.241 E0.01263 ; perimeter
G1 X100.308 Y95.371 E0.01694 ; perimeter
G1 X100.096 Y95.412 E0.01001 ; perimeter
G1 X99.885 Y95.420 E0.00977 ; perimeter
G1 X99.763 Y95.244 F10800.000 ; move inwards before travel
G1 X99.878 Y95.108 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.309547
G1 F2400.000
G1 X100.094 Y95.015 E0.00522 ; infill
G1 X100.343 Y94.951 E0.00570 ; infill
G1 X100.565 Y94.953 E0.00491 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.343 Y94.951 E-0.05846 ; wipe and retract
G1 X100.094 Y95.015 E-0.06782 ; wipe and retract
G1 X99.878 Y95.108 E-0.06218 ; wipe and retract
;WIPE_END
G1 E-2.21153 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X98.640 Y97.168 ; move to first infill point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.292308
G1 F2400.000
G1 X98.990 Y96.164 E0.02204 ; infill
G1 X98.927 Y96.205 F10800.000 ; move to first infill point
;WIDTH:0.386839
G1 F2400.000
G1 X98.804 Y96.756 E0.01614 ; infill
G1 X98.787 Y96.989 E0.00669 ; infill
;WIDTH:0.375332
G1 X98.785 Y97.076 E0.00240 ; infill
;WIDTH:0.361744
G1 X98.791 Y97.208 E0.00350 ; infill
;WIDTH:0.324971
G1 X98.799 Y97.242 E0.00082 ; infill
;WIDTH:0.302001
G1 X98.805 Y97.278 E0.00079 ; infill
;WIDTH:0.282777
G1 X98.828 Y97.512 E0.00469 ; infill
G1 X98.890 Y99.502 F10800.000 ; move to first infill point
;WIDTH:0.230422
G1 F2400.000
G1 X98.919 Y99.738 E0.00370 ; infill
G1 X98.939 Y100.220 E0.00752 ; infill
;WIDTH:0.178419
G1 X98.934 Y100.335 E0.00130 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.939 Y100.220 E-0.03056 ; wipe and retract
;WIPE_END
G1 E-2.36944 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X101.243 Y104.169 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.253 Y104.398 E0.01061 ; perimeter
G1 X101.125 Y104.546 E0.00906 ; perimeter
G1 X101.075 Y104.547 E0.00233 ; perimeter
G1 X100.957 Y104.482 E0.00624 ; perimeter
G1 X100.697 Y104.253 E0.01603 ; perimeter
G1 X100.286 Y103.595 E0.03597 ; perimeter
G1 X100.296 Y103.513 E0.00384 ; perimeter
G1 X100.243 Y103.392 E0.00610 ; perimeter
G1 X100.255 Y103.191 E0.00934 ; perimeter
G1 X100.300 Y103.120 E0.00388 ; perimeter
G1 X100.325 Y103.110 E0.00126 ; perimeter
G1 X100.552 Y103.152 E0.01065 ; perimeter
G1 X100.613 Y103.133 E0.00297 ; perimeter
G1 X100.816 Y103.239 E0.01060 ; perimeter
G1 X100.937 Y103.240 E0.00560 ; perimeter
G1 X101.178 Y103.423 E0.01402 ; perimeter
G1 X101.322 Y103.682 E0.01375 ; perimeter
G1 X101.334 Y103.976 E0.01362 ; perimeter
G1 X101.269 Y104.115 E0.00709 ; perimeter
G1 X101.042 Y104.279 F10800.000 ; move inwards before travel
G1 X101.043 Y104.029 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.416257
G1 F2400.000
G1 X100.815 Y103.665 E0.01332 ; infill
;WIDTH:0.407041
G1 X100.802 Y103.656 E0.00048 ; infill
;WIDTH:0.395706
G1 X100.779 Y103.643 E0.00079 ; infill
;WIDTH:0.368891
G1 X100.756 Y103.629 E0.00073 ; infill
;WIDTH:0.342078
G1 X100.647 Y103.548 E0.00336 ; infill
;WIDTH:0.314506
G1 X100.539 Y103.468 E0.00305 ; infill
G1 X100.510 Y103.402 F10800.000 ; move to first infill point
;WIDTH:0.133676
G1 F2400.000
G1 X100.577 Y103.443 E0.00059 ; infill
;WIDTH:0.141756
G1 X100.583 Y103.445 E0.00005 ; infill
;WIDTH:0.150392
G1 X100.592 Y103.455 E0.00012 ; infill
;WIDTH:0.183917
G1 X100.613 Y103.484 E0.00042 ; infill
;WIDTH:0.209377
G1 X100.798 Y103.834 E0.00548 ; infill
;WIDTH:0.234838
G1 X100.983 Y104.184 E0.00631 ; infill
G1 X100.986 Y104.186 F10800.000 ; move to first infill point
;WIDTH:0.12817
G1 F2400.000
G1 X100.746 Y103.474 E0.00533 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.986 Y104.186 E-0.19834 ; wipe and retract
;WIPE_END
G1 E-2.20166 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X104.472 Y107.000 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.511 Y106.815 E0.00879 ; perimeter
G1 X104.695 Y106.632 E0.01201 ; perimeter
G1 X104.883 Y106.579 E0.00906 ; perimeter
G1 X104.977 Y106.519 E0.00515 ; perimeter
G1 X105.096 Y106.511 E0.00552 ; perimeter
G1 X105.289 Y106.547 E0.00911 ; perimeter
G1 X105.454 Y106.630 E0.00854 ; perimeter
G1 X106.449 Y107.401 E0.05831 ; perimeter
G1 X106.702 Y107.645 E0.01626 ; perimeter
G1 X107.034 Y107.904 E0.01951 ; perimeter
G1 X107.471 Y108.374 E0.02976 ; perimeter
G1 X107.606 Y108.650 E0.01422 ; perimeter
G1 X107.655 Y108.872 E0.01051 ; perimeter
G1 X107.657 Y109.052 E0.00834 ; perimeter
G1 X107.584 Y109.251 E0.00984 ; perimeter
G1 X107.520 Y109.321 E0.00442 ; perimeter
G1 X107.377 Y109.348 E0.00670 ; perimeter
G1 X107.136 Y109.243 E0.01218 ; perimeter
G1 X106.855 Y108.928 E0.01957 ; perimeter
G1 X106.804 Y108.834 E0.00494 ; perimeter
G1 X106.410 Y108.372 E0.02813 ; perimeter
G1 X105.914 Y107.970 E0.02958 ; perimeter
G1 X105.341 Y107.561 E0.03259 ; perimeter
G1 X105.101 Y107.465 E0.01199 ; perimeter
G1 X104.962 Y107.373 E0.00773 ; perimeter
G1 X104.892 Y107.362 E0.00329 ; perimeter
G1 X104.769 Y107.281 E0.00680 ; perimeter
G1 X104.564 Y107.197 E0.01027 ; perimeter
G1 X104.502 Y107.115 E0.00479 ; perimeter
G1 X104.487 Y107.058 E0.00270 ; perimeter
G1 X104.636 Y106.904 F10800.000 ; move inwards before travel
G1 X104.732 Y106.937 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.298376
G1 F2400.000
G1 X104.931 Y106.948 E0.00424 ; infill
;WIDTH:0.319857
G1 X105.558 Y107.016 E0.01451 ; infill
G1 X104.743 Y106.924 F10800.000 ; move to first infill point
;WIDTH:0.392548
G1 F2400.000
G1 X105.045 Y106.965 E0.00885 ; infill
;WIDTH:0.414939
G1 X105.081 Y106.959 E0.00115 ; infill
;WIDTH:0.432441
G1 X105.112 Y106.957 E0.00098 ; infill
G1 X105.112 Y106.957 F10800.000 ; move to first infill point
;WIDTH:0.441579
G1 F2400.000
G1 X105.412 Y107.134 E0.01155 ; infill
;WIDTH:0.316608
G1 X105.552 Y107.216 E0.00368 ; infill
G1 X106.152 Y107.663 E0.01705 ; infill
G1 X106.683 Y108.110 E0.01578 ; infill
;WIDTH:0.340786
G1 X106.769 Y108.192 E0.00296 ; infill
;WIDTH:0.359723
G1 X107.136 Y108.605 E0.01453 ; infill
G1 X107.408 Y109.031 E0.01332 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.136 Y108.605 E-0.13339 ; wipe and retract
G1 X106.769 Y108.192 E-0.14557 ; wipe and retract
;WIPE_END
G1 E-2.12104 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X108.762 Y113.077 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.062 Y112.988 E0.01449 ; perimeter
G1 X109.398 Y113.118 E0.01671 ; perimeter
G1 X109.565 Y113.300 E0.01141 ; perimeter
G1 X109.894 Y113.796 E0.02758 ; perimeter
G1 X110.349 Y114.249 E0.02972 ; perimeter
G1 X111.207 Y115.057 E0.05463 ; perimeter
G1 X111.562 Y115.323 E0.02054 ; perimeter
G1 X111.633 Y115.349 E0.00349 ; perimeter
G1 X111.817 Y115.498 E0.01102 ; perimeter
G1 X111.908 Y115.727 E0.01139 ; perimeter
G1 X111.863 Y115.943 E0.01021 ; perimeter
G1 X111.721 Y116.098 E0.00973 ; perimeter
G1 X111.574 Y116.150 E0.00722 ; perimeter
G1 X111.439 Y116.144 E0.00627 ; perimeter
G1 X111.179 Y116.057 E0.01269 ; perimeter
G1 X109.076 Y114.094 E0.13325 ; perimeter
G1 X108.720 Y113.650 E0.02638 ; perimeter
G1 X108.638 Y113.434 E0.01072 ; perimeter
G1 X108.629 Y113.266 E0.00778 ; perimeter
G1 X108.673 Y113.111 E0.00747 ; perimeter
G1 X108.703 Y113.085 E0.00183 ; perimeter
G1 X109.031 Y113.237 F10800.000 ; move inwards before travel
G1 X108.960 Y113.270 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.437831
G1 F2400.000
G1 X109.218 Y113.571 E0.01300 ; infill
G1 X109.389 Y113.804 E0.00951 ; infill
;WIDTH:0.412031
G1 X109.486 Y113.918 E0.00459 ; infill
;WIDTH:0.377292
G1 X109.582 Y114.032 E0.00415 ; infill
;WIDTH:0.342556
G1 X110.084 Y114.519 E0.01742 ; infill
;WIDTH:0.31642
G1 X110.971 Y115.349 E0.02763 ; infill
G1 X111.350 Y115.666 E0.01124 ; infill
G1 X111.509 Y115.768 E0.00430 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.350 Y115.666 E-0.04988 ; wipe and retract
G1 X110.971 Y115.349 E-0.13039 ; wipe and retract
G1 X110.084 Y114.519 E-0.32062 ; wipe and retract
;WIPE_END
G1 E-1.89911 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 X115.287 Y112.800 ; move to first perimeter point
G1 Z14.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.246 Y112.757 E0.00277 ; perimeter
G1 X115.238 Y112.681 E0.00354 ; perimeter
G1 X115.180 Y112.538 E0.00712 ; perimeter
G1 X115.157 Y112.341 E0.00919 ; perimeter
G1 X115.165 Y112.250 E0.00427 ; perimeter
G1 X115.242 Y112.081 E0.00857 ; perimeter
G1 X115.292 Y112.023 E0.00354 ; perimeter
G1 X115.439 Y111.950 E0.00759 ; perimeter
G1 X115.577 Y111.951 E0.00639 ; perimeter
G1 X115.706 Y111.989 E0.00626 ; perimeter
G1 X115.826 Y112.139 E0.00889 ; perimeter
G1 X115.890 Y112.374 E0.01128 ; perimeter
G1 X115.861 Y112.459 E0.00416 ; perimeter
G1 X115.850 Y112.603 E0.00669 ; perimeter
G1 X115.763 Y112.773 E0.00882 ; perimeter
G1 X115.672 Y112.829 E0.00497 ; perimeter
G1 X115.456 Y112.878 E0.01027 ; perimeter
G1 X115.342 Y112.825 E0.00583 ; perimeter
G1 X115.289 Y112.740 F10800.000 ; move inwards before travel
G1 X115.463 Y114.505 ; move to first perimeter point
G1 F1800.000
G1 X115.659 Y114.631 E0.01081 ; perimeter
G1 X115.774 Y114.780 E0.00872 ; perimeter
G1 X115.797 Y114.949 E0.00789 ; perimeter
G1 X115.735 Y115.156 E0.01000 ; perimeter
G1 X115.601 Y115.311 E0.00951 ; perimeter
G1 X115.334 Y115.550 E0.01659 ; perimeter
G1 X115.105 Y115.799 E0.01567 ; perimeter
G1 X114.896 Y115.955 E0.01208 ; perimeter
G1 X114.720 Y116.007 E0.00852 ; perimeter
G1 X114.598 Y115.970 E0.00589 ; perimeter
G1 X114.470 Y115.888 E0.00704 ; perimeter
G1 X114.418 Y115.825 E0.00378 ; perimeter
G1 X114.357 Y115.694 E0.00668 ; perimeter
G1 X114.345 Y115.526 E0.00781 ; perimeter
G1 X114.373 Y115.406 E0.00571 ; perimeter
G1 X114.433 Y115.305 E0.00544 ; perimeter
G1 X114.981 Y114.752 E0.03608 ; perimeter
G1 X115.306 Y114.522 E0.01844 ; perimeter
G1 X115.403 Y114.509 E0.00453 ; perimeter
G1 X115.532 Y114.728 F10800.000 ; move inwards before travel
G1 X114.752 Y115.559 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.355443
G1 F2400.000
G1 X115.400 Y114.931 E0.02344 ; infill
;LAYER_CHANGE
;Z:14.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;14.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.752 Y115.559 E-0.23805 ; wipe and retract
;WIPE_END
G1 E-2.16195 F2400.000 ; retract
G1 Z14.275 F10800.000 ; lift Z
G1 Z14.400 ; move to next layer (71)
;AFTER_LAYER_CHANGE
;14.4
G1 Z14.475 ; lift Z
G1 X115.535 Y105.768 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.389 Y105.753 E0.00677 ; perimeter
G1 X115.327 Y105.730 E0.00306 ; perimeter
G1 X115.250 Y105.670 E0.00455 ; perimeter
G1 X115.136 Y105.448 E0.01155 ; perimeter
G1 X115.139 Y105.256 E0.00887 ; perimeter
G1 X115.220 Y105.086 E0.00875 ; perimeter
G1 X115.327 Y104.992 E0.00657 ; perimeter
G1 X115.404 Y104.965 E0.00381 ; perimeter
G1 X115.539 Y104.953 E0.00626 ; perimeter
G1 X115.709 Y105.002 E0.00819 ; perimeter
G1 X115.800 Y105.073 E0.00535 ; perimeter
G1 X115.866 Y105.182 E0.00592 ; perimeter
G1 X115.895 Y105.396 E0.01003 ; perimeter
G1 X115.869 Y105.532 E0.00641 ; perimeter
G1 X115.823 Y105.620 E0.00460 ; perimeter
G1 X115.684 Y105.735 E0.00837 ; perimeter
G1 X115.594 Y105.760 E0.00430 ; perimeter
G1 X115.451 Y105.648 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.389 Y105.753 E-0.05411 ; wipe and retract
G1 X115.327 Y105.730 E-0.01744 ; wipe and retract
G1 X115.250 Y105.670 E-0.02595 ; wipe and retract
G1 X115.136 Y105.448 E-0.06579 ; wipe and retract
G1 X115.139 Y105.256 E-0.05053 ; wipe and retract
G1 X115.220 Y105.086 E-0.04982 ; wipe and retract
G1 X115.327 Y104.992 E-0.03741 ; wipe and retract
G1 X115.404 Y104.965 E-0.02171 ; wipe and retract
G1 X115.539 Y104.953 E-0.03568 ; wipe and retract
G1 X115.709 Y105.002 E-0.04668 ; wipe and retract
G1 X115.800 Y105.073 E-0.03047 ; wipe and retract
G1 X115.866 Y105.182 E-0.03371 ; wipe and retract
G1 X115.895 Y105.396 E-0.05715 ; wipe and retract
G1 X115.869 Y105.532 E-0.03653 ; wipe and retract
G1 X115.823 Y105.620 E-0.02620 ; wipe and retract
G1 X115.684 Y105.735 E-0.04769 ; wipe and retract
G1 X115.594 Y105.760 E-0.02451 ; wipe and retract
;WIPE_END
G1 E-1.73861 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X113.323 Y102.166 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.051 Y102.103 E0.00944 ; perimeter
G1 X113.148 Y101.959 E0.00586 ; perimeter
G1 X113.298 Y102.111 E0.00726 ; perimeter
G1 X112.390 Y102.118 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.436 Y102.035 E0.00442 ; perimeter
G1 X112.583 Y101.952 E0.00783 ; perimeter
G1 X112.778 Y101.605 E0.01841 ; perimeter
G1 X112.929 Y101.529 E0.00781 ; perimeter
G1 X113.045 Y101.437 E0.00688 ; perimeter
G1 X113.181 Y101.394 E0.00661 ; perimeter
G1 X113.273 Y101.414 E0.00433 ; perimeter
G1 X113.427 Y101.506 E0.00834 ; perimeter
G1 X113.537 Y101.673 E0.00924 ; perimeter
G1 X113.681 Y101.790 E0.00862 ; perimeter
G1 X113.813 Y102.077 E0.01463 ; perimeter
G1 X113.863 Y102.342 E0.01250 ; perimeter
G1 X113.845 Y102.454 E0.00523 ; perimeter
G1 X113.794 Y102.572 E0.00598 ; perimeter
G1 X113.687 Y102.663 E0.00647 ; perimeter
G1 X113.505 Y102.703 E0.00866 ; perimeter
G1 X112.749 Y102.527 E0.03593 ; perimeter
G1 X112.525 Y102.428 E0.01135 ; perimeter
G1 X112.392 Y102.274 E0.00944 ; perimeter
G1 X112.378 Y102.177 E0.00456 ; perimeter
G1 X112.480 Y102.088 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.436 Y102.035 E-0.04046 ; wipe and retract
G1 X112.583 Y101.952 E-0.04461 ; wipe and retract
G1 X112.778 Y101.605 E-0.10490 ; wipe and retract
G1 X112.929 Y101.529 E-0.04447 ; wipe and retract
G1 X113.045 Y101.437 E-0.03919 ; wipe and retract
G1 X113.181 Y101.394 E-0.03764 ; wipe and retract
G1 X113.273 Y101.414 E-0.02464 ; wipe and retract
G1 X113.427 Y101.506 E-0.04750 ; wipe and retract
G1 X113.537 Y101.673 E-0.05265 ; wipe and retract
G1 X113.681 Y101.790 E-0.04913 ; wipe and retract
G1 X113.813 Y102.077 E-0.08335 ; wipe and retract
G1 X113.863 Y102.342 E-0.07124 ; wipe and retract
G1 X113.845 Y102.454 E-0.02979 ; wipe and retract
G1 X113.794 Y102.572 E-0.03405 ; wipe and retract
G1 X113.687 Y102.663 E-0.03684 ; wipe and retract
G1 X113.505 Y102.703 E-0.04934 ; wipe and retract
G1 X112.749 Y102.527 E-0.20470 ; wipe and retract
G1 X112.525 Y102.428 E-0.06465 ; wipe and retract
G1 X112.392 Y102.274 E-0.05380 ; wipe and retract
G1 X112.378 Y102.177 E-0.02595 ; wipe and retract
;WIPE_END
G1 E-1.26110 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X110.416 Y98.868 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.242 Y98.599 E0.01083 ; perimeter
G1 X109.982 Y98.091 E0.01934 ; perimeter
G1 X109.750 Y97.571 E0.01927 ; perimeter
G1 X109.485 Y97.352 E0.01165 ; perimeter
G1 X109.516 Y97.329 E0.00131 ; perimeter
G1 X109.746 Y97.302 E0.00782 ; perimeter
G1 X109.693 Y97.434 E0.00482 ; perimeter
G1 X110.028 Y97.964 E0.02121 ; perimeter
G1 X110.407 Y98.384 E0.01916 ; perimeter
G1 X110.661 Y98.505 E0.00951 ; perimeter
G1 X110.533 Y98.739 E0.00903 ; perimeter
G1 X110.457 Y98.823 E0.00385 ; perimeter
G1 X110.748 Y99.219 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.652 Y99.560 E0.01641 ; perimeter
G1 X110.594 Y99.636 E0.00445 ; perimeter
G1 X110.482 Y100.103 E0.02220 ; perimeter
G1 X110.405 Y100.164 E0.00457 ; perimeter
G1 X110.295 Y100.075 E0.00654 ; perimeter
G1 X110.068 Y99.525 E0.02756 ; perimeter
G1 X110.010 Y99.127 E0.01863 ; perimeter
G1 X109.825 Y98.841 E0.01581 ; perimeter
G1 X109.547 Y98.299 E0.02820 ; perimeter
G1 X109.356 Y97.871 E0.02173 ; perimeter
G1 X109.117 Y97.673 E0.01437 ; perimeter
G1 X108.968 Y97.482 E0.01121 ; perimeter
G1 X108.917 Y97.330 E0.00743 ; perimeter
G1 X109.014 Y97.099 E0.01163 ; perimeter
G1 X109.319 Y96.876 E0.01747 ; perimeter
G1 X109.632 Y96.815 E0.01479 ; perimeter
G1 X109.934 Y96.843 E0.01403 ; perimeter
G1 X110.106 Y96.920 E0.00873 ; perimeter
G1 X110.194 Y96.992 E0.00527 ; perimeter
G1 X110.279 Y97.262 E0.01313 ; perimeter
G1 X110.231 Y97.383 E0.00604 ; perimeter
G1 X110.413 Y97.672 E0.01580 ; perimeter
G1 X110.701 Y97.990 E0.01985 ; perimeter
G1 X110.886 Y98.078 E0.00952 ; perimeter
G1 X111.051 Y98.122 E0.00789 ; perimeter
G1 X111.084 Y98.160 E0.00232 ; perimeter
G1 X111.203 Y98.476 E0.01564 ; perimeter
G1 X111.142 Y98.686 E0.01014 ; perimeter
G1 X111.039 Y98.805 E0.00728 ; perimeter
G1 X110.935 Y99.014 E0.01082 ; perimeter
G1 X110.789 Y99.175 E0.01007 ; perimeter
G1 X110.397 Y99.267 F10800.000 ; move inwards before travel
G1 X110.262 Y99.184 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.180485
G1 F2400.000
G1 X110.372 Y99.346 E0.00225 ; infill
G1 X110.498 Y99.220 E0.00203 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.372 Y99.346 E-0.04694 ; wipe and retract
G1 X110.262 Y99.184 E-0.05185 ; wipe and retract
;WIPE_END
G1 E-2.30122 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X107.754 Y96.447 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.668 Y96.531 E0.00556 ; perimeter
G1 X107.454 Y96.612 E0.01061 ; perimeter
G1 X107.183 Y96.629 E0.01259 ; perimeter
G1 X106.938 Y96.551 E0.01189 ; perimeter
G1 X106.797 Y96.442 E0.00827 ; perimeter
G1 X106.712 Y96.251 E0.00969 ; perimeter
G1 X106.735 Y96.069 E0.00849 ; perimeter
G1 X106.852 Y95.914 E0.00897 ; perimeter
G1 X106.932 Y95.873 E0.00422 ; perimeter
G1 X107.072 Y95.818 E0.00694 ; perimeter
G1 X107.258 Y95.804 E0.00865 ; perimeter
G1 X107.362 Y95.819 E0.00484 ; perimeter
G1 X107.506 Y95.866 E0.00702 ; perimeter
G1 X107.729 Y96.005 E0.01216 ; perimeter
G1 X107.770 Y96.107 E0.00512 ; perimeter
G1 X107.789 Y96.324 E0.01008 ; perimeter
G1 X107.771 Y96.390 E0.00317 ; perimeter
G1 X107.634 Y96.444 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.668 Y96.531 E-0.04607 ; wipe and retract
G1 X107.454 Y96.612 E-0.06043 ; wipe and retract
G1 X107.183 Y96.629 E-0.07172 ; wipe and retract
G1 X106.938 Y96.551 E-0.06774 ; wipe and retract
G1 X106.797 Y96.442 E-0.04713 ; wipe and retract
G1 X106.712 Y96.251 E-0.05521 ; wipe and retract
G1 X106.735 Y96.069 E-0.04836 ; wipe and retract
G1 X106.852 Y95.914 E-0.05110 ; wipe and retract
G1 X106.932 Y95.873 E-0.02402 ; wipe and retract
G1 X107.072 Y95.818 E-0.03956 ; wipe and retract
G1 X107.258 Y95.804 E-0.04927 ; wipe and retract
G1 X107.362 Y95.819 E-0.02756 ; wipe and retract
G1 X107.506 Y95.866 E-0.03999 ; wipe and retract
G1 X107.729 Y96.005 E-0.06925 ; wipe and retract
G1 X107.770 Y96.107 E-0.02917 ; wipe and retract
G1 X107.789 Y96.324 E-0.05744 ; wipe and retract
G1 X107.771 Y96.390 E-0.01804 ; wipe and retract
;WIPE_END
G1 E-1.59794 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X103.821 Y94.867 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.653 Y94.966 E0.00905 ; perimeter
G1 X103.368 Y95.005 E0.01331 ; perimeter
G1 X103.272 Y95.000 E0.00448 ; perimeter
G1 X103.087 Y94.876 E0.01031 ; perimeter
G1 X102.995 Y94.700 E0.00917 ; perimeter
G1 X102.980 Y94.520 E0.00835 ; perimeter
G1 X103.070 Y94.364 E0.00833 ; perimeter
G1 X103.251 Y94.218 E0.01078 ; perimeter
G1 X103.383 Y94.188 E0.00629 ; perimeter
G1 X103.559 Y94.193 E0.00814 ; perimeter
G1 X103.822 Y94.306 E0.01331 ; perimeter
G1 X103.878 Y94.399 E0.00499 ; perimeter
G1 X103.925 Y94.556 E0.00762 ; perimeter
G1 X103.846 Y94.813 E0.01241 ; perimeter
G1 X103.630 Y94.826 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.653 Y94.966 E-0.06519 ; wipe and retract
G1 X103.368 Y95.005 E-0.07582 ; wipe and retract
G1 X103.272 Y95.000 E-0.02550 ; wipe and retract
G1 X103.087 Y94.876 E-0.05875 ; wipe and retract
G1 X102.995 Y94.700 E-0.05224 ; wipe and retract
G1 X102.980 Y94.520 E-0.04756 ; wipe and retract
G1 X103.070 Y94.364 E-0.04748 ; wipe and retract
G1 X103.251 Y94.218 E-0.06139 ; wipe and retract
G1 X103.383 Y94.188 E-0.03583 ; wipe and retract
G1 X103.559 Y94.193 E-0.04638 ; wipe and retract
G1 X103.822 Y94.306 E-0.07582 ; wipe and retract
G1 X103.878 Y94.399 E-0.02845 ; wipe and retract
G1 X103.925 Y94.556 E-0.04339 ; wipe and retract
G1 X103.846 Y94.813 E-0.07070 ; wipe and retract
;WIPE_END
G1 E-1.66550 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X100.707 Y94.849 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.713 Y95.067 E0.01012 ; perimeter
G1 X100.597 Y95.229 E0.00920 ; perimeter
G1 X100.340 Y95.349 E0.01314 ; perimeter
G1 X100.121 Y95.367 E0.01022 ; perimeter
G1 X99.911 Y95.323 E0.00992 ; perimeter
G1 X99.791 Y95.170 E0.00902 ; perimeter
G1 X99.799 Y94.880 E0.01341 ; perimeter
G1 X99.897 Y94.678 E0.01041 ; perimeter
G1 X100.104 Y94.593 E0.01038 ; perimeter
G1 X100.236 Y94.569 E0.00621 ; perimeter
G1 X100.476 Y94.595 E0.01118 ; perimeter
G1 X100.646 Y94.697 E0.00917 ; perimeter
G1 X100.682 Y94.794 E0.00482 ; perimeter
G1 X100.553 Y95.003 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.713 Y95.067 E-0.07239 ; wipe and retract
G1 X100.597 Y95.229 E-0.05241 ; wipe and retract
G1 X100.340 Y95.349 E-0.07486 ; wipe and retract
G1 X100.121 Y95.367 E-0.05820 ; wipe and retract
G1 X99.911 Y95.323 E-0.05652 ; wipe and retract
G1 X99.791 Y95.170 E-0.05139 ; wipe and retract
G1 X99.799 Y94.880 E-0.07640 ; wipe and retract
G1 X99.897 Y94.678 E-0.05931 ; wipe and retract
G1 X100.104 Y94.593 E-0.05911 ; wipe and retract
G1 X100.236 Y94.569 E-0.03538 ; wipe and retract
G1 X100.476 Y94.595 E-0.06371 ; wipe and retract
G1 X100.646 Y94.697 E-0.05226 ; wipe and retract
G1 X100.682 Y94.794 E-0.02746 ; wipe and retract
;WIPE_END
G1 E-1.66060 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X99.218 Y96.194 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.257 Y96.426 E0.01090 ; perimeter
G1 X99.214 Y96.965 E0.02504 ; perimeter
G1 X99.161 Y97.087 E0.00617 ; perimeter
G1 X99.124 Y97.241 E0.00732 ; perimeter
G1 X98.852 Y97.661 E0.02320 ; perimeter
G1 X98.824 Y97.690 E0.00184 ; perimeter
G1 X98.800 Y97.688 E0.00113 ; perimeter
G1 X98.739 Y97.603 E0.00484 ; perimeter
G1 X98.672 Y97.548 E0.00402 ; perimeter
G1 X98.625 Y97.386 E0.00781 ; perimeter
G1 X98.490 Y97.250 E0.00887 ; perimeter
G1 X98.432 Y97.121 E0.00654 ; perimeter
G1 X98.405 Y96.649 E0.02190 ; perimeter
G1 X98.447 Y96.520 E0.00630 ; perimeter
G1 X98.582 Y96.292 E0.01225 ; perimeter
G1 X98.755 Y96.144 E0.01056 ; perimeter
G1 X98.960 Y96.053 E0.01042 ; perimeter
G1 X99.093 Y96.096 E0.00644 ; perimeter
G1 X99.171 Y96.157 E0.00458 ; perimeter
G1 X99.089 Y96.391 F10800.000 ; move inwards before travel
G1 X98.967 Y96.314 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.227961
G1 F2400.000
G1 X98.684 Y97.094 E0.01277 ; infill
G1 X98.809 Y97.230 F10800.000 ; move to first infill point
;WIDTH:0.386666
G1 F2400.000
G1 X98.820 Y96.708 E0.01493 ; infill
G1 X98.892 Y96.346 E0.01053 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.820 Y96.708 E-0.09719 ; wipe and retract
G1 X98.809 Y97.230 E-0.13782 ; wipe and retract
;WIPE_END
G1 E-2.16500 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X98.892 Y99.339 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.011 Y99.382 E0.00588 ; perimeter
G1 X99.118 Y99.480 E0.00671 ; perimeter
G1 X99.167 Y99.571 E0.00482 ; perimeter
G1 X99.206 Y99.759 E0.00889 ; perimeter
G1 X99.261 Y99.863 E0.00544 ; perimeter
G1 X99.296 Y100.193 E0.01537 ; perimeter
G1 X99.263 Y100.527 E0.01554 ; perimeter
G1 X99.145 Y100.879 E0.01721 ; perimeter
G1 X99.035 Y100.994 E0.00736 ; perimeter
G1 X99.010 Y100.990 E0.00116 ; perimeter
G1 X98.850 Y100.802 E0.01143 ; perimeter
G1 X98.804 Y100.776 E0.00246 ; perimeter
G1 X98.681 Y100.616 E0.00934 ; perimeter
G1 X98.590 Y100.315 E0.01457 ; perimeter
G1 X98.590 Y99.848 E0.02166 ; perimeter
G1 X98.656 Y99.602 E0.01180 ; perimeter
G1 X98.701 Y99.536 E0.00369 ; perimeter
G1 X98.788 Y99.469 E0.00505 ; perimeter
G1 X98.839 Y99.357 E0.00571 ; perimeter
G1 X98.960 Y99.447 F10800.000 ; move inwards before travel
G1 X98.920 Y99.672 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.246544
G1 F2400.000
G1 X98.948 Y100.363 E0.01171 ; infill
;WIDTH:0.21899
G1 X98.958 Y100.462 E0.00146 ; infill
;WIDTH:0.180213
G1 X98.957 Y100.579 E0.00134 ; infill
G1 X98.989 Y100.587 F10800.000 ; move to first infill point
;WIDTH:0.204088
G1 F2400.000
G1 X98.910 Y99.877 E0.00956 ; infill
;WIDTH:0.194587
G1 X98.902 Y99.686 E0.00242 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.910 Y99.877 E-0.05062 ; wipe and retract
;WIPE_END
G1 E-2.34938 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X101.288 Y103.721 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.384 Y104.516 E0.03708 ; perimeter
G1 X101.344 Y104.794 E0.01299 ; perimeter
G1 X101.302 Y104.878 E0.00437 ; perimeter
G1 X101.262 Y104.903 E0.00216 ; perimeter
G1 X101.194 Y104.879 E0.00333 ; perimeter
G1 X101.031 Y104.734 E0.01011 ; perimeter
G1 X100.955 Y104.692 E0.00404 ; perimeter
G1 X100.918 Y104.632 E0.00328 ; perimeter
G1 X100.760 Y104.476 E0.01025 ; perimeter
G1 X100.124 Y103.453 E0.05581 ; perimeter
G1 X100.023 Y103.204 E0.01245 ; perimeter
G1 X99.999 Y103.072 E0.00622 ; perimeter
G1 X100.012 Y102.904 E0.00780 ; perimeter
G1 X100.026 Y102.885 E0.00111 ; perimeter
G1 X100.131 Y102.863 E0.00496 ; perimeter
G1 X100.388 Y102.920 E0.01218 ; perimeter
G1 X100.686 Y103.111 E0.01640 ; perimeter
G1 X100.897 Y103.218 E0.01094 ; perimeter
G1 X101.141 Y103.446 E0.01549 ; perimeter
G1 X101.260 Y103.668 E0.01169 ; perimeter
G1 X101.017 Y104.015 F10800.000 ; move inwards before travel
G1 X101.074 Y103.960 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.261149
G1 F2400.000
G1 X100.276 Y103.186 E0.02019 ; infill
G1 X100.300 Y103.154 F10800.000 ; move to first infill point
;WIDTH:0.392398
G1 F2400.000
G1 X100.698 Y103.588 E0.01713 ; infill
;WIDTH:0.42497
G1 X100.789 Y103.704 E0.00469 ; infill
G1 X101.111 Y104.261 E0.02043 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.789 Y103.704 E-0.16967 ; wipe and retract
G1 X100.698 Y103.588 E-0.03893 ; wipe and retract
;WIPE_END
G1 E-2.19140 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X104.301 Y106.892 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.677 Y106.687 E0.01981 ; perimeter
G1 X105.003 Y106.591 E0.01575 ; perimeter
G1 X105.152 Y106.586 E0.00694 ; perimeter
G1 X105.360 Y106.625 E0.00982 ; perimeter
G1 X105.568 Y106.727 E0.01068 ; perimeter
G1 X106.061 Y107.111 E0.02895 ; perimeter
G1 X106.381 Y107.398 E0.01996 ; perimeter
G1 X106.617 Y107.646 E0.01583 ; perimeter
G1 X106.739 Y107.740 E0.00713 ; perimeter
G1 X106.893 Y107.938 E0.01164 ; perimeter
G1 X107.231 Y108.193 E0.01960 ; perimeter
G1 X107.546 Y108.537 E0.02161 ; perimeter
G1 X107.720 Y108.915 E0.01929 ; perimeter
G1 X107.746 Y109.026 E0.00526 ; perimeter
G1 X107.755 Y109.211 E0.00858 ; perimeter
G1 X107.683 Y109.445 E0.01136 ; perimeter
G1 X107.584 Y109.533 E0.00614 ; perimeter
G1 X107.523 Y109.546 E0.00290 ; perimeter
G1 X107.462 Y109.541 E0.00283 ; perimeter
G1 X107.221 Y109.423 E0.01241 ; perimeter
G1 X107.046 Y109.236 E0.01186 ; perimeter
G1 X106.934 Y109.077 E0.00902 ; perimeter
G1 X106.810 Y108.797 E0.01419 ; perimeter
G1 X106.707 Y108.672 E0.00749 ; perimeter
G1 X106.613 Y108.470 E0.01034 ; perimeter
G1 X106.184 Y108.083 E0.02677 ; perimeter
G1 X105.595 Y107.722 E0.03196 ; perimeter
G1 X105.278 Y107.554 E0.01664 ; perimeter
G1 X104.840 Y107.403 E0.02143 ; perimeter
G1 X104.722 Y107.387 E0.00553 ; perimeter
G1 X104.373 Y107.241 E0.01757 ; perimeter
G1 X104.244 Y107.074 E0.00977 ; perimeter
G1 X104.279 Y106.947 E0.00607 ; perimeter
G1 X104.698 Y106.941 F10800.000 ; move inwards before travel
G1 X104.548 Y107.031 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.353942
G1 F2400.000
G1 X105.533 Y107.005 E0.02547 ; infill
G1 X105.620 Y107.073 F10800.000 ; move to first infill point
;WIDTH:0.297716
G1 F2400.000
G1 X104.577 Y107.015 E0.02213 ; infill
G1 X104.672 Y106.964 F10800.000 ; move to first infill point
;WIDTH:0.44711
G1 F2400.000
G1 X105.118 Y107.030 E0.01513 ; infill
;WIDTH:0.461661
G1 X105.332 Y107.104 E0.00789 ; infill
;WIDTH:0.367519
G1 X105.783 Y107.384 E0.01433 ; infill
;WIDTH:0.25586
G1 X106.252 Y107.739 E0.01041 ; infill
;WIDTH:0.142009
G1 X106.517 Y107.963 E0.00285 ; infill
G1 X106.692 Y108.150 E0.00212 ; infill
;WIDTH:0.166205
G1 X106.850 Y108.281 E0.00210 ; infill
G1 X107.436 Y108.875 E0.00856 ; infill
G1 X107.487 Y109.262 F10800.000 ; move to first infill point
;WIDTH:0.303449
G1 F2400.000
G1 X107.129 Y108.619 E0.01594 ; infill
;WIDTH:0.286625
G1 X107.010 Y108.480 E0.00370 ; infill
;WIDTH:0.273425
G1 X106.808 Y108.176 E0.00700 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.010 Y108.480 E-0.09642 ; wipe and retract
;WIPE_END
G1 E-2.30358 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X108.893 Y113.092 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.212 Y113.003 E0.01534 ; perimeter
G1 X109.464 Y113.064 E0.01198 ; perimeter
G1 X109.617 Y113.232 E0.01054 ; perimeter
G1 X109.878 Y113.651 E0.02285 ; perimeter
G1 X109.927 Y113.773 E0.00611 ; perimeter
G1 X110.249 Y114.135 E0.02243 ; perimeter
G1 X111.243 Y115.069 E0.06319 ; perimeter
G1 X111.613 Y115.336 E0.02115 ; perimeter
G1 X111.687 Y115.361 E0.00362 ; perimeter
G1 X111.874 Y115.513 E0.01115 ; perimeter
G1 X111.939 Y115.723 E0.01020 ; perimeter
G1 X111.917 Y115.941 E0.01014 ; perimeter
G1 X111.900 Y115.962 E0.00122 ; perimeter
G1 X111.743 Y116.103 E0.00981 ; perimeter
G1 X111.625 Y116.151 E0.00588 ; perimeter
G1 X111.479 Y116.146 E0.00679 ; perimeter
G1 X111.194 Y116.056 E0.01382 ; perimeter
G1 X111.027 Y115.945 E0.00931 ; perimeter
G1 X109.677 Y114.656 E0.08645 ; perimeter
G1 X109.449 Y114.407 E0.01563 ; perimeter
G1 X109.127 Y114.122 E0.01995 ; perimeter
G1 X108.845 Y113.757 E0.02135 ; perimeter
G1 X108.731 Y113.459 E0.01478 ; perimeter
G1 X108.739 Y113.336 E0.00568 ; perimeter
G1 X108.815 Y113.175 E0.00828 ; perimeter
G1 X108.852 Y113.136 E0.00250 ; perimeter
G1 X109.179 Y113.259 F10800.000 ; move inwards before travel
G1 X109.562 Y113.962 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33401
G1 F2400.000
G1 X109.977 Y114.409 E0.01474 ; infill
;WIDTH:0.34529
G1 X111.001 Y115.378 E0.03544 ; infill
;WIDTH:0.355329
G1 X111.289 Y115.618 E0.00973 ; infill
G1 X111.544 Y115.760 E0.00760 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.289 Y115.618 E-0.07722 ; wipe and retract
G1 X111.001 Y115.378 E-0.09884 ; wipe and retract
;WIPE_END
G1 E-2.22393 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 X115.270 Y112.885 ; move to first perimeter point
G1 Z14.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.220 Y112.800 E0.00459 ; perimeter
G1 X115.203 Y112.642 E0.00737 ; perimeter
G1 X115.160 Y112.536 E0.00527 ; perimeter
G1 X115.163 Y112.318 E0.01009 ; perimeter
G1 X115.310 Y112.075 E0.01316 ; perimeter
G1 X115.437 Y112.020 E0.00642 ; perimeter
G1 X115.667 Y112.044 E0.01071 ; perimeter
G1 X115.820 Y112.187 E0.00971 ; perimeter
G1 X115.892 Y112.483 E0.01409 ; perimeter
G1 X115.871 Y112.660 E0.00826 ; perimeter
G1 X115.770 Y112.874 E0.01095 ; perimeter
G1 X115.692 Y112.919 E0.00417 ; perimeter
G1 X115.620 Y113.015 E0.00555 ; perimeter
G1 X115.482 Y113.040 E0.00648 ; perimeter
G1 X115.323 Y112.913 E0.00945 ; perimeter
G1 X115.298 Y112.790 F10800.000 ; move inwards before travel
G1 X115.496 Y112.263 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.243749
G1 F2400.000
G1 X115.538 Y112.565 E0.00510 ; infill
G1 X115.510 Y112.753 E0.00317 ; infill
G1 X115.504 Y114.467 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.653 Y114.577 E0.00858 ; perimeter
G1 X115.780 Y114.737 E0.00944 ; perimeter
G1 X115.806 Y114.929 E0.00900 ; perimeter
G1 X115.739 Y115.152 E0.01076 ; perimeter
G1 X115.107 Y115.800 E0.04192 ; perimeter
G1 X114.896 Y115.958 E0.01222 ; perimeter
G1 X114.719 Y116.008 E0.00852 ; perimeter
G1 X114.599 Y115.966 E0.00587 ; perimeter
G1 X114.478 Y115.889 E0.00665 ; perimeter
G1 X114.423 Y115.823 E0.00398 ; perimeter
G1 X114.364 Y115.695 E0.00652 ; perimeter
G1 X114.352 Y115.529 E0.00770 ; perimeter
G1 X114.378 Y115.408 E0.00574 ; perimeter
G1 X114.438 Y115.306 E0.00548 ; perimeter
G1 X115.015 Y114.717 E0.03821 ; perimeter
G1 X115.355 Y114.484 E0.01907 ; perimeter
G1 X115.444 Y114.474 E0.00416 ; perimeter
G1 X115.551 Y114.646 F10800.000 ; move inwards before travel
G1 X114.758 Y115.557 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.330638
G1 F2400.000
G1 X115.393 Y114.942 E0.02114 ; infill
G1 X115.485 Y114.753 E0.00502 ; infill
;LAYER_CHANGE
;Z:14.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;14.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.393 Y114.942 E-0.05541 ; wipe and retract
G1 X114.758 Y115.557 E-0.23321 ; wipe and retract
;WIPE_END
G1 E-2.11138 F2400.000 ; retract
G1 Z14.475 F10800.000 ; lift Z
G1 Z14.600 ; move to next layer (72)
;AFTER_LAYER_CHANGE
;14.6
G1 Z14.675 ; lift Z
G1 X107.494 Y109.719 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.273 Y109.574 E0.01226 ; perimeter
G1 X107.195 Y109.495 E0.00513 ; perimeter
G1 X107.028 Y109.246 E0.01393 ; perimeter
G1 X106.916 Y108.983 E0.01323 ; perimeter
G1 X106.909 Y108.904 E0.00367 ; perimeter
G1 X106.801 Y108.533 E0.01792 ; perimeter
G1 X106.714 Y108.448 E0.00565 ; perimeter
G1 X106.575 Y108.202 E0.01306 ; perimeter
G1 X106.335 Y108.025 E0.01380 ; perimeter
G1 X106.153 Y107.959 E0.00896 ; perimeter
G1 X105.923 Y107.819 E0.01246 ; perimeter
G1 X105.315 Y107.537 E0.03107 ; perimeter
G1 X105.129 Y107.510 E0.00869 ; perimeter
G1 X104.847 Y107.424 E0.01367 ; perimeter
G1 X104.449 Y107.397 E0.01846 ; perimeter
G1 X104.300 Y107.357 E0.00714 ; perimeter
G1 X104.111 Y107.271 E0.00962 ; perimeter
G1 X104.020 Y107.206 E0.00520 ; perimeter
G1 X103.923 Y107.091 E0.00694 ; perimeter
G1 X103.894 Y107.012 E0.00390 ; perimeter
G1 X103.970 Y106.936 E0.00497 ; perimeter
G1 X104.220 Y106.803 E0.01314 ; perimeter
G1 X104.898 Y106.639 E0.03229 ; perimeter
G1 X105.284 Y106.678 E0.01797 ; perimeter
G1 X105.578 Y106.798 E0.01474 ; perimeter
G1 X106.078 Y107.220 E0.03029 ; perimeter
G1 X106.361 Y107.521 E0.01911 ; perimeter
G1 X106.635 Y107.859 E0.02016 ; perimeter
G1 X106.722 Y108.041 E0.00937 ; perimeter
G1 X106.875 Y108.111 E0.00778 ; perimeter
G1 X107.467 Y108.528 E0.03353 ; perimeter
G1 X107.641 Y108.733 E0.01246 ; perimeter
G1 X107.831 Y109.176 E0.02234 ; perimeter
G1 X107.845 Y109.407 E0.01073 ; perimeter
G1 X107.793 Y109.612 E0.00979 ; perimeter
G1 X107.639 Y109.737 E0.00919 ; perimeter
G1 X107.554 Y109.727 E0.00395 ; perimeter
G1 X107.428 Y109.463 F10800.000 ; move inwards before travel
G1 X107.572 Y109.482 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.281288
G1 F2400.000
G1 X107.256 Y108.828 E0.01439 ; infill
;WIDTH:0.270658
G1 X107.123 Y108.581 E0.00531 ; infill
G1 X106.057 Y107.618 F10800.000 ; move to first infill point
;WIDTH:0.0969214
G1 F2400.000
G1 X106.051 Y107.583 E0.00016 ; infill
G1 X105.860 Y107.445 E0.00106 ; infill
;WIDTH:0.228061
G1 X105.503 Y107.211 E0.00657 ; infill
;WIDTH:0.325559
G1 X105.373 Y107.142 E0.00345 ; infill
G1 X105.187 Y107.090 E0.00453 ; infill
G1 X104.934 Y107.039 E0.00608 ; infill
G1 X104.816 Y107.050 E0.00277 ; infill
;WIDTH:0.303343
G1 X104.732 Y107.059 E0.00183 ; infill
;WIDTH:0.273696
G1 X104.287 Y107.041 E0.00855 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.732 Y107.059 E-0.11760 ; wipe and retract
;WIPE_END
G1 E-2.28240 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X101.004 Y103.340 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.250 Y103.759 E0.02253 ; perimeter
G1 X101.261 Y103.843 E0.00396 ; perimeter
G1 X101.479 Y104.467 E0.03060 ; perimeter
G1 X101.532 Y104.768 E0.01414 ; perimeter
G1 X101.497 Y105.143 E0.01747 ; perimeter
G1 X101.512 Y105.186 E0.00212 ; perimeter
G1 X101.499 Y105.233 E0.00225 ; perimeter
G1 X101.455 Y105.261 E0.00242 ; perimeter
G1 X101.192 Y105.148 E0.01325 ; perimeter
G1 X101.008 Y104.967 E0.01197 ; perimeter
G1 X100.836 Y104.722 E0.01385 ; perimeter
G1 X100.641 Y104.373 E0.01853 ; perimeter
G1 X100.521 Y104.060 E0.01552 ; perimeter
G1 X100.392 Y103.916 E0.00900 ; perimeter
G1 X100.267 Y103.704 E0.01137 ; perimeter
G1 X100.100 Y103.519 E0.01155 ; perimeter
G1 X99.923 Y103.258 E0.01460 ; perimeter
G1 X99.835 Y103.086 E0.00895 ; perimeter
G1 X99.736 Y102.761 E0.01573 ; perimeter
G1 X99.761 Y102.584 E0.00827 ; perimeter
G1 X99.780 Y102.567 E0.00115 ; perimeter
G1 X99.901 Y102.611 E0.00598 ; perimeter
G1 X99.979 Y102.595 E0.00368 ; perimeter
G1 X100.215 Y102.689 E0.01174 ; perimeter
G1 X100.614 Y102.950 E0.02206 ; perimeter
G1 X100.780 Y103.136 E0.01156 ; perimeter
G1 X100.962 Y103.296 E0.01125 ; perimeter
G1 X100.837 Y103.703 F10800.000 ; move inwards before travel
G1 X100.623 Y103.520 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.361299
G1 F2400.000
G1 X100.592 Y103.485 E0.00124 ; infill
;WIDTH:0.343369
G1 X100.571 Y103.463 E0.00075 ; infill
;WIDTH:0.334828
G1 X100.530 Y103.425 E0.00136 ; infill
;WIDTH:0.324484
G1 X100.358 Y103.229 E0.00610 ; infill
;WIDTH:0.31348
G1 X100.026 Y102.881 E0.01081 ; infill
G1 X100.623 Y103.520 F10800.000 ; move to first infill point
;WIDTH:0.380381
G1 F2400.000
G1 X100.842 Y103.833 E0.01072 ; infill
;WIDTH:0.260475
G1 X100.987 Y104.212 E0.00734 ; infill
G1 X101.284 Y104.831 E0.01243 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.987 Y104.212 E-0.18134 ; wipe and retract
G1 X100.842 Y103.833 E-0.10700 ; wipe and retract
;WIPE_END
G1 E-2.11165 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X98.987 Y99.597 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.146 Y99.733 E0.00970 ; perimeter
G1 X99.266 Y99.985 E0.01292 ; perimeter
G1 X99.272 Y100.097 E0.00516 ; perimeter
G1 X99.329 Y100.343 E0.01170 ; perimeter
G1 X99.313 Y100.499 E0.00729 ; perimeter
G1 X99.331 Y100.851 E0.01630 ; perimeter
G1 X99.295 Y100.952 E0.00496 ; perimeter
G1 X99.288 Y101.452 E0.02320 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.260 Y101.575 E0.00525 ; perimeter (bridge)
G1 X99.189 Y101.516 E0.00387 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.079 Y101.409 E0.00710 ; perimeter
G1 X98.872 Y101.133 E0.01597 ; perimeter
G1 X98.674 Y100.793 E0.01824 ; perimeter
G1 X98.584 Y100.471 E0.01548 ; perimeter
G1 X98.569 Y100.131 E0.01575 ; perimeter
G1 X98.648 Y99.801 E0.01575 ; perimeter
G1 X98.807 Y99.627 E0.01090 ; perimeter
G1 X98.928 Y99.607 E0.00567 ; perimeter
G1 X99.035 Y99.801 F10800.000 ; move inwards before travel
G1 X98.947 Y99.899 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.256739
G1 F2400.000
G1 X98.926 Y100.136 E0.00425 ; infill
;WIDTH:0.267996
G1 X98.959 Y100.499 E0.00682 ; infill
G1 X99.026 Y100.907 E0.00773 ; infill
G1 X99.062 Y100.888 F10800.000 ; move to first infill point
;WIDTH:0.18297
G1 F2400.000
G1 X98.821 Y100.114 E0.00943 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.062 Y100.888 E-0.21380 ; wipe and retract
;WIPE_END
G1 E-2.18620 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X98.939 Y97.293 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.853 Y97.343 E0.00461 ; perimeter
G1 X98.731 Y97.251 E0.00709 ; perimeter
G1 X98.655 Y97.236 E0.00362 ; perimeter
G1 X98.554 Y97.146 E0.00628 ; perimeter
G1 X98.448 Y96.939 E0.01074 ; perimeter
G1 X98.425 Y96.660 E0.01296 ; perimeter
G1 X98.438 Y96.576 E0.00394 ; perimeter
G1 X98.576 Y96.316 E0.01364 ; perimeter
G1 X98.745 Y96.197 E0.00955 ; perimeter
G1 X98.962 Y96.119 E0.01069 ; perimeter
G1 X99.119 Y96.159 E0.00752 ; perimeter
G1 X99.228 Y96.323 E0.00910 ; perimeter
G1 X99.284 Y96.511 E0.00909 ; perimeter
G1 X99.245 Y96.866 E0.01656 ; perimeter
G1 X99.149 Y97.059 E0.00997 ; perimeter
G1 X98.972 Y97.243 E0.01182 ; perimeter
G1 X98.847 Y97.256 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.853 Y97.343 E-0.04107 ; wipe and retract
G1 X98.731 Y97.251 E-0.04038 ; wipe and retract
G1 X98.655 Y97.236 E-0.02063 ; wipe and retract
G1 X98.554 Y97.146 E-0.03575 ; wipe and retract
G1 X98.448 Y96.939 E-0.06121 ; wipe and retract
G1 X98.425 Y96.660 E-0.07384 ; wipe and retract
G1 X98.438 Y96.576 E-0.02244 ; wipe and retract
G1 X98.576 Y96.316 E-0.07769 ; wipe and retract
G1 X98.745 Y96.197 E-0.05440 ; wipe and retract
G1 X98.962 Y96.119 E-0.06089 ; wipe and retract
G1 X99.119 Y96.159 E-0.04284 ; wipe and retract
G1 X99.228 Y96.323 E-0.05183 ; wipe and retract
G1 X99.284 Y96.511 E-0.05181 ; wipe and retract
G1 X99.245 Y96.866 E-0.09436 ; wipe and retract
G1 X99.149 Y97.059 E-0.05681 ; wipe and retract
G1 X98.972 Y97.243 E-0.06733 ; wipe and retract
;WIPE_END
G1 E-1.54671 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X100.030 Y95.360 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.908 Y95.281 E0.00676 ; perimeter
G1 X99.800 Y95.029 E0.01271 ; perimeter
G1 X99.804 Y94.852 E0.00819 ; perimeter
G1 X99.902 Y94.678 E0.00923 ; perimeter
G1 X100.208 Y94.569 E0.01506 ; perimeter
G1 X100.436 Y94.594 E0.01062 ; perimeter
G1 X100.614 Y94.717 E0.01004 ; perimeter
G1 X100.671 Y95.030 E0.01470 ; perimeter
G1 X100.546 Y95.221 E0.01059 ; perimeter
G1 X100.264 Y95.372 E0.01481 ; perimeter
G1 X100.090 Y95.366 E0.00808 ; perimeter
G1 X99.997 Y95.218 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.908 Y95.281 E-0.05300 ; wipe and retract
G1 X99.800 Y95.029 E-0.07239 ; wipe and retract
G1 X99.804 Y94.852 E-0.04663 ; wipe and retract
G1 X99.902 Y94.678 E-0.05258 ; wipe and retract
G1 X100.208 Y94.569 E-0.08579 ; wipe and retract
G1 X100.436 Y94.594 E-0.06050 ; wipe and retract
G1 X100.614 Y94.717 E-0.05721 ; wipe and retract
G1 X100.671 Y95.030 E-0.08377 ; wipe and retract
G1 X100.546 Y95.221 E-0.06033 ; wipe and retract
G1 X100.264 Y95.372 E-0.08434 ; wipe and retract
G1 X100.090 Y95.366 E-0.04602 ; wipe and retract
;WIPE_END
G1 E-1.69743 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X102.913 Y94.697 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.917 Y94.476 E0.01024 ; perimeter
G1 X102.946 Y94.389 E0.00424 ; perimeter
G1 X103.023 Y94.306 E0.00526 ; perimeter
G1 X103.193 Y94.194 E0.00945 ; perimeter
G1 X103.372 Y94.151 E0.00851 ; perimeter
G1 X103.703 Y94.176 E0.01540 ; perimeter
G1 X103.870 Y94.261 E0.00865 ; perimeter
G1 X103.977 Y94.550 E0.01429 ; perimeter
G1 X103.970 Y94.643 E0.00433 ; perimeter
G1 X103.866 Y94.805 E0.00892 ; perimeter
G1 X103.696 Y94.932 E0.00984 ; perimeter
G1 X103.444 Y94.973 E0.01185 ; perimeter
G1 X103.208 Y94.960 E0.01095 ; perimeter
G1 X103.017 Y94.845 E0.01030 ; perimeter
G1 X102.960 Y94.734 E0.00578 ; perimeter
G1 X103.068 Y94.540 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.917 Y94.476 E-0.06888 ; wipe and retract
G1 X102.946 Y94.389 E-0.02415 ; wipe and retract
G1 X103.023 Y94.306 E-0.02999 ; wipe and retract
G1 X103.193 Y94.194 E-0.05384 ; wipe and retract
G1 X103.372 Y94.151 E-0.04848 ; wipe and retract
G1 X103.703 Y94.176 E-0.08770 ; wipe and retract
G1 X103.870 Y94.261 E-0.04929 ; wipe and retract
G1 X103.977 Y94.550 E-0.08139 ; wipe and retract
G1 X103.970 Y94.643 E-0.02469 ; wipe and retract
G1 X103.866 Y94.805 E-0.05081 ; wipe and retract
G1 X103.696 Y94.932 E-0.05607 ; wipe and retract
G1 X103.444 Y94.973 E-0.06750 ; wipe and retract
G1 X103.208 Y94.960 E-0.06240 ; wipe and retract
G1 X103.017 Y94.845 E-0.05868 ; wipe and retract
G1 X102.960 Y94.734 E-0.03295 ; wipe and retract
;WIPE_END
G1 E-1.60316 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X106.854 Y96.073 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.949 Y95.935 E0.00771 ; perimeter
G1 X107.150 Y95.831 E0.01052 ; perimeter
G1 X107.439 Y95.813 E0.01340 ; perimeter
G1 X107.692 Y95.896 E0.01233 ; perimeter
G1 X107.893 Y96.029 E0.01115 ; perimeter
G1 X107.942 Y96.158 E0.00642 ; perimeter
G1 X107.991 Y96.204 E0.00313 ; perimeter
G1 X108.008 Y96.340 E0.00633 ; perimeter
G1 X107.968 Y96.439 E0.00496 ; perimeter
G1 X107.854 Y96.531 E0.00678 ; perimeter
G1 X107.655 Y96.627 E0.01023 ; perimeter
G1 X107.357 Y96.638 E0.01383 ; perimeter
G1 X106.953 Y96.490 E0.01990 ; perimeter
G1 X106.903 Y96.434 E0.00346 ; perimeter
G1 X106.841 Y96.245 E0.00921 ; perimeter
G1 X106.850 Y96.132 E0.00524 ; perimeter
G1 X107.018 Y96.045 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.949 Y95.935 E-0.05814 ; wipe and retract
G1 X107.150 Y95.831 E-0.05993 ; wipe and retract
G1 X107.439 Y95.813 E-0.07637 ; wipe and retract
G1 X107.692 Y95.896 E-0.07022 ; wipe and retract
G1 X107.893 Y96.029 E-0.06354 ; wipe and retract
G1 X107.942 Y96.158 E-0.03656 ; wipe and retract
G1 X107.991 Y96.204 E-0.01783 ; wipe and retract
G1 X108.008 Y96.340 E-0.03606 ; wipe and retract
G1 X107.968 Y96.439 E-0.02826 ; wipe and retract
G1 X107.854 Y96.531 E-0.03862 ; wipe and retract
G1 X107.655 Y96.627 E-0.05829 ; wipe and retract
G1 X107.357 Y96.638 E-0.07878 ; wipe and retract
G1 X106.953 Y96.490 E-0.11339 ; wipe and retract
G1 X106.903 Y96.434 E-0.01971 ; wipe and retract
G1 X106.841 Y96.245 E-0.05245 ; wipe and retract
G1 X106.850 Y96.132 E-0.02985 ; wipe and retract
;WIPE_END
G1 E-1.56200 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X109.689 Y97.271 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X109.960 Y97.270 E0.00915 ; perimeter
G1 X110.085 Y97.337 E0.00482 ; perimeter
G1 X110.175 Y97.616 E0.00995 ; perimeter
G1 X110.716 Y98.179 E0.02641 ; perimeter
G1 X110.775 Y98.195 E0.00205 ; perimeter
G1 X110.876 Y98.452 E0.00936 ; perimeter
G1 X110.747 Y98.559 E0.00566 ; perimeter
G1 X110.606 Y98.612 E0.00511 ; perimeter
G1 X110.486 Y98.725 E0.00558 ; perimeter
G1 X110.438 Y98.570 E0.00550 ; perimeter
G1 X110.364 Y98.422 E0.00562 ; perimeter
G1 X110.354 Y98.124 E0.01009 ; perimeter
G1 X110.138 Y97.797 E0.01327 ; perimeter
G1 X110.015 Y97.522 E0.01017 ; perimeter
G1 X109.737 Y97.308 E0.01190 ; perimeter
G1 X109.624 Y97.830 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.204 Y97.505 E0.02460 ; perimeter
G1 X109.083 Y97.215 E0.01456 ; perimeter
G1 X109.208 Y96.999 E0.01157 ; perimeter
G1 X109.509 Y96.817 E0.01627 ; perimeter
G1 X109.671 Y96.776 E0.00777 ; perimeter
G1 X110.072 Y96.792 E0.01858 ; perimeter
G1 X110.317 Y96.901 E0.01240 ; perimeter
G1 X110.502 Y97.058 E0.01124 ; perimeter
G1 X110.600 Y97.363 E0.01484 ; perimeter
G1 X110.971 Y97.748 E0.02477 ; perimeter
G1 X111.027 Y97.763 E0.00271 ; perimeter
G1 X111.184 Y97.918 E0.01021 ; perimeter
G1 X111.376 Y98.406 E0.02429 ; perimeter
G1 X111.384 Y98.505 E0.00459 ; perimeter
G1 X111.322 Y98.671 E0.00819 ; perimeter
G1 X111.182 Y98.836 E0.01004 ; perimeter
G1 X111.003 Y98.977 E0.01056 ; perimeter
G1 X110.874 Y99.026 E0.00643 ; perimeter
G1 X110.741 Y99.159 E0.00868 ; perimeter
G1 X110.657 Y99.180 E0.00400 ; perimeter
G1 X110.363 Y99.518 E0.02080 ; perimeter
G1 X110.352 Y99.560 E0.00199 ; perimeter
G1 X110.210 Y99.368 E0.01105 ; perimeter
G1 X110.078 Y99.041 E0.01636 ; perimeter
G1 X109.989 Y98.750 E0.01407 ; perimeter
G1 X109.885 Y98.544 E0.01073 ; perimeter
G1 X109.877 Y98.276 E0.01241 ; perimeter
G1 X109.714 Y98.030 E0.01367 ; perimeter
G1 X109.649 Y97.884 E0.00736 ; perimeter
G1 X109.730 Y97.444 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.204 Y97.505 E-0.15428 ; wipe and retract
G1 X109.083 Y97.215 E-0.08293 ; wipe and retract
G1 X109.208 Y96.999 E-0.06594 ; wipe and retract
G1 X109.509 Y96.817 E-0.09270 ; wipe and retract
G1 X109.671 Y96.776 E-0.04427 ; wipe and retract
G1 X110.072 Y96.792 E-0.10587 ; wipe and retract
G1 X110.317 Y96.901 E-0.07066 ; wipe and retract
G1 X110.502 Y97.058 E-0.06401 ; wipe and retract
G1 X110.600 Y97.363 E-0.08455 ; wipe and retract
G1 X110.971 Y97.748 E-0.14111 ; wipe and retract
G1 X111.027 Y97.763 E-0.01546 ; wipe and retract
G1 X111.184 Y97.918 E-0.05815 ; wipe and retract
G1 X111.376 Y98.406 E-0.13838 ; wipe and retract
G1 X111.384 Y98.505 E-0.02616 ; wipe and retract
G1 X111.322 Y98.671 E-0.04667 ; wipe and retract
G1 X111.182 Y98.836 E-0.05719 ; wipe and retract
G1 X111.003 Y98.977 E-0.06016 ; wipe and retract
G1 X110.874 Y99.026 E-0.03661 ; wipe and retract
G1 X110.741 Y99.159 E-0.04947 ; wipe and retract
G1 X110.657 Y99.180 E-0.02280 ; wipe and retract
G1 X110.363 Y99.518 E-0.11847 ; wipe and retract
G1 X110.352 Y99.560 E-0.01135 ; wipe and retract
G1 X110.210 Y99.368 E-0.06295 ; wipe and retract
G1 X110.078 Y99.041 E-0.09323 ; wipe and retract
G1 X109.989 Y98.750 E-0.08014 ; wipe and retract
G1 X109.885 Y98.544 E-0.06110 ; wipe and retract
G1 X109.877 Y98.276 E-0.07072 ; wipe and retract
G1 X109.714 Y98.030 E-0.07790 ; wipe and retract
G1 X109.649 Y97.884 E-0.04193 ; wipe and retract
;WIPE_END
G1 E-0.36486 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X113.235 Y101.943 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X113.265 Y102.051 E0.00379 ; perimeter
G1 X113.188 Y102.016 E0.00288 ; perimeter
G1 X113.202 Y101.994 E0.00090 ; perimeter
G1 X112.645 Y102.179 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.652 Y101.957 E0.01028 ; perimeter
G1 X112.755 Y101.797 E0.00883 ; perimeter
G1 X112.753 Y101.630 E0.00773 ; perimeter
G1 X112.872 Y101.404 E0.01180 ; perimeter
G1 X113.111 Y101.167 E0.01562 ; perimeter
G1 X113.302 Y101.227 E0.00928 ; perimeter
G1 X113.402 Y101.307 E0.00592 ; perimeter
G1 X113.628 Y101.634 E0.01844 ; perimeter
G1 X113.739 Y101.902 E0.01342 ; perimeter
G1 X113.777 Y102.225 E0.01508 ; perimeter
G1 X113.754 Y102.344 E0.00559 ; perimeter
G1 X113.699 Y102.457 E0.00582 ; perimeter
G1 X113.594 Y102.539 E0.00619 ; perimeter
G1 X113.355 Y102.579 E0.01122 ; perimeter
G1 X113.165 Y102.534 E0.00904 ; perimeter
G1 X112.686 Y102.319 E0.02434 ; perimeter
G1 X112.662 Y102.237 E0.00396 ; perimeter
G1 X112.795 Y102.016 F10800.000 ; move inwards before travel
G1 X113.233 Y101.489 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.137675
G1 F2400.000
G1 X113.179 Y101.498 E0.00043 ; infill
G1 X112.996 Y101.784 E0.00268 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.179 Y101.498 E-0.08974 ; wipe and retract
G1 X113.233 Y101.489 E-0.01452 ; wipe and retract
;WIPE_END
G1 E-2.29574 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X115.315 Y104.978 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.401 Y104.945 E0.00426 ; perimeter
G1 X115.552 Y104.938 E0.00703 ; perimeter
G1 X115.725 Y104.989 E0.00834 ; perimeter
G1 X115.808 Y105.060 E0.00504 ; perimeter
G1 X115.859 Y105.138 E0.00434 ; perimeter
G1 X115.895 Y105.368 E0.01078 ; perimeter
G1 X115.867 Y105.516 E0.00695 ; perimeter
G1 X115.822 Y105.601 E0.00445 ; perimeter
G1 X115.686 Y105.712 E0.00816 ; perimeter
G1 X115.540 Y105.748 E0.00697 ; perimeter
G1 X115.396 Y105.734 E0.00670 ; perimeter
G1 X115.304 Y105.697 E0.00458 ; perimeter
G1 X115.203 Y105.588 E0.00690 ; perimeter
G1 X115.135 Y105.413 E0.00867 ; perimeter
G1 X115.136 Y105.261 E0.00707 ; perimeter
G1 X115.218 Y105.063 E0.00990 ; perimeter
G1 X115.270 Y105.018 E0.00321 ; perimeter
G1 X115.397 Y105.020 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.401 Y104.945 E-0.03946 ; wipe and retract
G1 X115.552 Y104.938 E-0.04008 ; wipe and retract
G1 X115.725 Y104.989 E-0.04749 ; wipe and retract
G1 X115.808 Y105.060 E-0.02870 ; wipe and retract
G1 X115.859 Y105.138 E-0.02474 ; wipe and retract
G1 X115.895 Y105.368 E-0.06142 ; wipe and retract
G1 X115.867 Y105.516 E-0.03957 ; wipe and retract
G1 X115.822 Y105.601 E-0.02537 ; wipe and retract
G1 X115.686 Y105.712 E-0.04649 ; wipe and retract
G1 X115.540 Y105.748 E-0.03971 ; wipe and retract
G1 X115.396 Y105.734 E-0.03816 ; wipe and retract
G1 X115.304 Y105.697 E-0.02609 ; wipe and retract
G1 X115.203 Y105.588 E-0.03931 ; wipe and retract
G1 X115.135 Y105.413 E-0.04940 ; wipe and retract
G1 X115.136 Y105.261 E-0.04026 ; wipe and retract
G1 X115.218 Y105.063 E-0.05638 ; wipe and retract
G1 X115.270 Y105.018 E-0.01827 ; wipe and retract
;WIPE_END
G1 E-1.73910 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X115.179 Y112.308 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.284 Y112.170 E0.00805 ; perimeter
G1 X115.446 Y112.092 E0.00833 ; perimeter
G1 X115.657 Y112.111 E0.00980 ; perimeter
G1 X115.826 Y112.258 E0.01041 ; perimeter
G1 X115.897 Y112.508 E0.01201 ; perimeter
G1 X115.873 Y112.816 E0.01432 ; perimeter
G1 X115.746 Y113.090 E0.01397 ; perimeter
G1 X115.586 Y113.283 E0.01163 ; perimeter
G1 X115.525 Y113.331 E0.00356 ; perimeter
G1 X115.477 Y113.317 E0.00230 ; perimeter
G1 X115.460 Y113.271 E0.00227 ; perimeter
G1 X115.292 Y113.120 E0.01046 ; perimeter
G1 X115.197 Y112.873 E0.01227 ; perimeter
G1 X115.150 Y112.558 E0.01475 ; perimeter
G1 X115.154 Y112.362 E0.00907 ; perimeter
G1 X115.352 Y112.291 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.284 Y112.170 E-0.06136 ; wipe and retract
G1 X115.446 Y112.092 E-0.04747 ; wipe and retract
G1 X115.657 Y112.111 E-0.05586 ; wipe and retract
G1 X115.826 Y112.258 E-0.05928 ; wipe and retract
G1 X115.897 Y112.508 E-0.06843 ; wipe and retract
G1 X115.873 Y112.816 E-0.08158 ; wipe and retract
G1 X115.746 Y113.090 E-0.07960 ; wipe and retract
G1 X115.586 Y113.283 E-0.06628 ; wipe and retract
G1 X115.525 Y113.331 E-0.02027 ; wipe and retract
G1 X115.477 Y113.317 E-0.01310 ; wipe and retract
G1 X115.460 Y113.271 E-0.01293 ; wipe and retract
G1 X115.292 Y113.120 E-0.05960 ; wipe and retract
G1 X115.197 Y112.873 E-0.06990 ; wipe and retract
G1 X115.150 Y112.558 E-0.08401 ; wipe and retract
G1 X115.154 Y112.362 E-0.05169 ; wipe and retract
;WIPE_END
G1 E-1.56862 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X115.373 Y114.376 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.565 Y114.420 E0.00909 ; perimeter
G1 X115.785 Y114.686 E0.01601 ; perimeter
G1 X115.816 Y114.910 E0.01047 ; perimeter
G1 X115.774 Y115.095 E0.00876 ; perimeter
G1 X115.631 Y115.276 E0.01071 ; perimeter
G1 X115.378 Y115.504 E0.01575 ; perimeter
G1 X115.107 Y115.803 E0.01868 ; perimeter
G1 X114.921 Y115.946 E0.01088 ; perimeter
G1 X114.741 Y116.000 E0.00873 ; perimeter
G1 X114.596 Y115.959 E0.00698 ; perimeter
G1 X114.485 Y115.891 E0.00601 ; perimeter
G1 X114.427 Y115.822 E0.00418 ; perimeter
G1 X114.372 Y115.696 E0.00636 ; perimeter
G1 X114.360 Y115.540 E0.00726 ; perimeter
G1 X114.388 Y115.404 E0.00643 ; perimeter
G1 X114.446 Y115.302 E0.00544 ; perimeter
G1 X114.546 Y115.191 E0.00693 ; perimeter
G1 X114.746 Y115.013 E0.01240 ; perimeter
G1 X115.087 Y114.628 E0.02383 ; perimeter
G1 X115.322 Y114.407 E0.01494 ; perimeter
G1 X115.490 Y114.534 F10800.000 ; move inwards before travel
G1 X115.503 Y114.712 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.394004
G1 F2400.000
G1 X115.383 Y114.924 E0.00712 ; infill
G1 X115.101 Y115.214 E0.01181 ; infill
;WIDTH:0.361112
G1 X114.778 Y115.542 E0.01219 ; infill
G1 X114.745 Y115.602 E0.00179 ; infill
;WIDTH:0.320413
G1 X114.742 Y115.610 E0.00021 ; infill
;WIDTH:0.306858
G1 X114.724 Y115.745 E0.00297 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.742 Y115.610 E-0.03577 ; wipe and retract
;WIPE_END
G1 E-2.36423 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 X111.987 Y115.911 ; move to first perimeter point
G1 Z14.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.798 Y116.111 E0.01277 ; perimeter
G1 X111.689 Y116.152 E0.00542 ; perimeter
G1 X111.519 Y116.147 E0.00785 ; perimeter
G1 X111.200 Y116.050 E0.01543 ; perimeter
G1 X111.152 Y116.018 E0.00271 ; perimeter
G1 X110.597 Y115.497 E0.03523 ; perimeter
G1 X109.802 Y114.689 E0.05252 ; perimeter
G1 X109.376 Y114.290 E0.02703 ; perimeter
G1 X108.959 Y113.840 E0.02842 ; perimeter
G1 X108.853 Y113.614 E0.01157 ; perimeter
G1 X108.822 Y113.502 E0.00535 ; perimeter
G1 X108.859 Y113.250 E0.01179 ; perimeter
G1 X109.030 Y113.060 E0.01187 ; perimeter
G1 X109.187 Y112.974 E0.00830 ; perimeter
G1 X109.439 Y112.980 E0.01164 ; perimeter
G1 X109.521 Y112.998 E0.00393 ; perimeter
G1 X109.656 Y113.138 E0.00896 ; perimeter
G1 X109.858 Y113.540 E0.02088 ; perimeter
G1 X109.943 Y113.842 E0.01452 ; perimeter
G1 X110.105 Y114.010 E0.01080 ; perimeter
G1 X110.231 Y114.222 E0.01145 ; perimeter
G1 X111.266 Y115.117 E0.06338 ; perimeter
G1 X111.344 Y115.145 E0.00381 ; perimeter
G1 X111.559 Y115.310 E0.01255 ; perimeter
G1 X111.785 Y115.385 E0.01102 ; perimeter
G1 X111.933 Y115.522 E0.00934 ; perimeter
G1 X112.013 Y115.732 E0.01042 ; perimeter
G1 X111.996 Y115.851 E0.00557 ; perimeter
G1 X111.712 Y115.929 F10800.000 ; move inwards before travel
G1 X111.683 Y115.892 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.308766
G1 F2400.000
G1 X111.059 Y115.424 E0.01724 ; infill
;WIDTH:0.298304
G1 X110.851 Y115.237 E0.00593 ; infill
;WIDTH:0.286522
G1 X110.438 Y114.850 E0.01147 ; infill
;WIDTH:0.240773
G1 X110.025 Y114.463 E0.00932 ; infill
;WIDTH:0.195025
G1 X109.823 Y114.225 E0.00395 ; infill
G1 X109.631 Y114.036 E0.00340 ; infill
;WIDTH:0.29332
G1 X109.607 Y114.000 E0.00091 ; infill
;LAYER_CHANGE
;Z:14.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;14.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.631 Y114.036 E-0.01157 ; wipe and retract
;WIPE_END
G1 E-2.38843 F2400.000 ; retract
G1 Z14.675 F10800.000 ; lift Z
G1 Z14.800 ; move to next layer (73)
;AFTER_LAYER_CHANGE
;14.8
G1 Z14.875 ; lift Z
G1 X107.102 Y108.568 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.206 Y108.550 E0.00487 ; perimeter
G1 X107.379 Y108.601 E0.00836 ; perimeter
G1 X107.556 Y108.724 E0.01001 ; perimeter
G1 X107.743 Y108.947 E0.01346 ; perimeter
G1 X107.896 Y109.293 E0.01753 ; perimeter
G1 X107.903 Y109.481 E0.00869 ; perimeter
G1 X107.950 Y109.648 E0.00806 ; perimeter
G1 X107.908 Y109.835 E0.00889 ; perimeter
G1 X107.765 Y109.944 E0.00830 ; perimeter
G1 X107.713 Y109.956 E0.00248 ; perimeter
G1 X107.625 Y109.942 E0.00410 ; perimeter
G1 X107.543 Y109.898 E0.00430 ; perimeter
G1 X107.283 Y109.678 E0.01579 ; perimeter
G1 X107.125 Y109.426 E0.01381 ; perimeter
G1 X107.022 Y109.168 E0.01283 ; perimeter
G1 X106.982 Y108.862 E0.01433 ; perimeter
G1 X107.126 Y108.623 E0.01293 ; perimeter
G1 X107.196 Y108.614 F10800.000 ; move inwards before travel
G1 X107.259 Y108.878 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318615
G1 F2400.000
G1 X107.420 Y109.148 E0.00722 ; infill
G1 X107.694 Y109.687 E0.01386 ; infill
G1 X107.691 Y109.700 F10800.000 ; move to first infill point
;WIDTH:0.185639
G1 F2400.000
G1 X107.244 Y108.937 E0.01050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.691 Y109.700 E-0.23345 ; wipe and retract
;WIPE_END
G1 E-2.16655 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X109.222 Y112.943 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.416 Y112.895 E0.00923 ; perimeter
G1 X109.580 Y112.932 E0.00778 ; perimeter
G1 X109.701 Y113.051 E0.00786 ; perimeter
G1 X109.749 Y113.153 E0.00523 ; perimeter
G1 X109.869 Y113.605 E0.02166 ; perimeter
G1 X109.820 Y113.775 E0.00822 ; perimeter
G1 X109.972 Y114.111 E0.01707 ; perimeter
G1 X110.263 Y114.437 E0.02027 ; perimeter
G1 X110.832 Y114.883 E0.03349 ; perimeter
G1 X111.212 Y115.149 E0.02146 ; perimeter
G1 X111.443 Y115.234 E0.01139 ; perimeter
G1 X111.509 Y115.284 E0.00387 ; perimeter
G1 X111.887 Y115.410 E0.01847 ; perimeter
G1 X112.001 Y115.523 E0.00743 ; perimeter
G1 X112.086 Y115.733 E0.01049 ; perimeter
G1 X112.057 Y115.887 E0.00724 ; perimeter
G1 X111.928 Y116.064 E0.01014 ; perimeter
G1 X111.861 Y116.117 E0.00399 ; perimeter
G1 X111.752 Y116.154 E0.00529 ; perimeter
G1 X111.562 Y116.148 E0.00882 ; perimeter
G1 X111.258 Y116.054 E0.01475 ; perimeter
G1 X110.970 Y115.782 E0.01834 ; perimeter
G1 X110.583 Y115.351 E0.02684 ; perimeter
G1 X110.492 Y115.223 E0.00728 ; perimeter
G1 X110.060 Y114.782 E0.02859 ; perimeter
G1 X109.927 Y114.583 E0.01109 ; perimeter
G1 X109.324 Y114.048 E0.03735 ; perimeter
G1 X109.282 Y114.030 E0.00211 ; perimeter
G1 X109.039 Y113.798 E0.01555 ; perimeter
G1 X108.921 Y113.594 E0.01092 ; perimeter
G1 X108.903 Y113.504 E0.00427 ; perimeter
G1 X108.938 Y113.223 E0.01312 ; perimeter
G1 X109.114 Y112.971 E0.01426 ; perimeter
G1 X109.162 Y112.943 E0.00255 ; perimeter
G1 X109.384 Y113.060 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.416 Y112.895 E-0.06812 ; wipe and retract
G1 X109.580 Y112.932 E-0.04432 ; wipe and retract
G1 X109.701 Y113.051 E-0.04476 ; wipe and retract
G1 X109.749 Y113.153 E-0.02977 ; wipe and retract
G1 X109.869 Y113.605 E-0.12338 ; wipe and retract
G1 X109.820 Y113.775 E-0.04685 ; wipe and retract
G1 X109.972 Y114.111 E-0.09723 ; wipe and retract
G1 X110.263 Y114.437 E-0.11546 ; wipe and retract
G1 X110.832 Y114.883 E-0.19078 ; wipe and retract
G1 X111.212 Y115.149 E-0.12227 ; wipe and retract
G1 X111.443 Y115.234 E-0.06490 ; wipe and retract
G1 X111.509 Y115.284 E-0.02204 ; wipe and retract
G1 X111.887 Y115.410 E-0.10522 ; wipe and retract
G1 X112.001 Y115.523 E-0.04231 ; wipe and retract
G1 X112.086 Y115.733 E-0.05978 ; wipe and retract
G1 X112.057 Y115.887 E-0.04125 ; wipe and retract
G1 X111.928 Y116.064 E-0.05779 ; wipe and retract
G1 X111.861 Y116.117 E-0.02274 ; wipe and retract
G1 X111.752 Y116.154 E-0.03015 ; wipe and retract
G1 X111.562 Y116.148 E-0.05024 ; wipe and retract
G1 X111.258 Y116.054 E-0.08403 ; wipe and retract
G1 X110.970 Y115.782 E-0.10446 ; wipe and retract
G1 X110.583 Y115.351 E-0.15290 ; wipe and retract
G1 X110.492 Y115.223 E-0.04145 ; wipe and retract
G1 X110.060 Y114.782 E-0.16287 ; wipe and retract
G1 X109.927 Y114.583 E-0.06317 ; wipe and retract
G1 X109.324 Y114.048 E-0.21277 ; wipe and retract
G1 X109.282 Y114.030 E-0.01204 ; wipe and retract
G1 X109.098 Y113.855 E-0.06696 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X110.772 Y115.165 ; move to first infill point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.137911
G1 F2400.000
G1 X110.916 Y115.292 E0.00152 ; infill
;WIDTH:0.185389
G1 X111.693 Y115.911 E0.01177 ; infill
G1 X111.739 Y115.904 F10800.000 ; move to first infill point
;WIDTH:0.310498
G1 F2400.000
G1 X111.317 Y115.602 E0.01155 ; infill
;WIDTH:0.298729
G1 X111.265 Y115.557 E0.00146 ; infill
;WIDTH:0.291614
G1 X110.878 Y115.318 E0.00942 ; infill
G1 X111.115 Y115.582 F10800.000 ; move to first infill point
;WIDTH:0.318021
G1 F2400.000
G1 X111.663 Y115.754 E0.01313 ; infill
G1 X111.776 Y115.639 E0.00369 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.663 Y115.754 E-0.04255 ; wipe and retract
G1 X111.115 Y115.582 E-0.15147 ; wipe and retract
;WIPE_END
G1 E-2.20597 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X114.380 Y115.450 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.448 Y115.308 E0.00730 ; perimeter
G1 X115.024 Y114.715 E0.03833 ; perimeter
G1 X115.292 Y114.271 E0.02401 ; perimeter
G1 X115.445 Y113.803 E0.02281 ; perimeter
G1 X115.307 Y113.455 E0.01733 ; perimeter
G1 X115.290 Y113.330 E0.00585 ; perimeter
G1 X115.173 Y112.982 E0.01700 ; perimeter
G1 X115.131 Y112.607 E0.01749 ; perimeter
G1 X115.144 Y112.423 E0.00851 ; perimeter
G1 X115.194 Y112.319 E0.00534 ; perimeter
G1 X115.288 Y112.204 E0.00688 ; perimeter
G1 X115.417 Y112.144 E0.00661 ; perimeter
G1 X115.673 Y112.163 E0.01192 ; perimeter
G1 X115.836 Y112.306 E0.01002 ; perimeter
G1 X115.896 Y112.484 E0.00868 ; perimeter
G1 X115.893 Y112.784 E0.01391 ; perimeter
G1 X115.874 Y112.983 E0.00928 ; perimeter
G1 X115.703 Y113.464 E0.02364 ; perimeter
G1 X115.499 Y113.722 E0.01520 ; perimeter
G1 X115.569 Y113.827 E0.00584 ; perimeter
G1 X115.490 Y114.072 E0.01194 ; perimeter
G1 X115.610 Y114.277 E0.01099 ; perimeter
G1 X115.630 Y114.416 E0.00652 ; perimeter
G1 X115.789 Y114.638 E0.01264 ; perimeter
G1 X115.825 Y114.892 E0.01191 ; perimeter
G1 X115.792 Y115.058 E0.00784 ; perimeter
G1 X115.749 Y115.141 E0.00430 ; perimeter
G1 X115.339 Y115.543 E0.02663 ; perimeter
G1 X115.107 Y115.806 E0.01622 ; perimeter
G1 X114.930 Y115.944 E0.01041 ; perimeter
G1 X114.818 Y115.989 E0.00559 ; perimeter
G1 X114.745 Y116.004 E0.00344 ; perimeter
G1 X114.603 Y115.958 E0.00689 ; perimeter
G1 X114.502 Y115.898 E0.00547 ; perimeter
G1 X114.431 Y115.817 E0.00497 ; perimeter
G1 X114.379 Y115.697 E0.00607 ; perimeter
G1 X114.370 Y115.510 E0.00869 ; perimeter
G1 X114.531 Y115.408 F10800.000 ; move inwards before travel
G1 X114.613 Y115.519 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.363637
G1 F2400.000
G1 X114.773 Y115.554 E0.00437 ; infill
G1 X115.051 Y115.263 E0.01075 ; infill
;WIDTH:0.378746
G1 X115.360 Y114.950 E0.01227 ; infill
;WIDTH:0.394518
G1 X115.399 Y114.900 E0.00184 ; infill
G1 X115.498 Y114.645 E0.00802 ; infill
G1 X115.553 Y113.166 F10800.000 ; move to first infill point
;WIDTH:0.273931
G1 F2400.000
G1 X115.524 Y112.904 E0.00506 ; infill
;WIDTH:0.303119
G1 X115.522 Y112.764 E0.00303 ; infill
;WIDTH:0.319748
G1 X115.514 Y112.528 E0.00545 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.522 Y112.764 E-0.06253 ; wipe and retract
;WIPE_END
G1 E-2.33747 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X115.543 Y105.728 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.400 Y105.715 E0.00668 ; perimeter
G1 X115.273 Y105.649 E0.00663 ; perimeter
G1 X115.162 Y105.484 E0.00920 ; perimeter
G1 X115.134 Y105.374 E0.00530 ; perimeter
G1 X115.154 Y105.161 E0.00990 ; perimeter
G1 X115.215 Y105.041 E0.00621 ; perimeter
G1 X115.303 Y104.964 E0.00540 ; perimeter
G1 X115.412 Y104.920 E0.00547 ; perimeter
G1 X115.551 Y104.919 E0.00643 ; perimeter
G1 X115.736 Y104.977 E0.00898 ; perimeter
G1 X115.815 Y105.047 E0.00486 ; perimeter
G1 X115.856 Y105.111 E0.00357 ; perimeter
G1 X115.896 Y105.340 E0.01076 ; perimeter
G1 X115.865 Y105.499 E0.00748 ; perimeter
G1 X115.821 Y105.581 E0.00431 ; perimeter
G1 X115.692 Y105.685 E0.00770 ; perimeter
G1 X115.602 Y105.719 E0.00444 ; perimeter
G1 X115.459 Y105.611 F10800.000 ; move inwards before travel
G1 X115.513 Y105.319 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.319522
G1 F2400.000
G1 X115.509 Y105.298 E0.00050 ; infill
;WIDTH:0.309118
G1 X115.498 Y105.280 E0.00046 ; infill
;WIDTH:0.281165
G1 X115.488 Y105.257 E0.00049 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.498 Y105.280 E-0.00657 ; wipe and retract
;WIPE_END
G1 E-2.39343 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X113.485 Y102.391 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.275 Y102.419 E0.00981 ; perimeter
G1 X112.833 Y102.193 E0.02301 ; perimeter
G1 X112.768 Y101.853 E0.01606 ; perimeter
G1 X112.764 Y101.556 E0.01373 ; perimeter
G1 X112.800 Y101.488 E0.00359 ; perimeter
G1 X112.828 Y101.220 E0.01244 ; perimeter
G1 X112.867 Y101.089 E0.00634 ; perimeter
G1 X112.969 Y100.966 E0.00738 ; perimeter
G1 X113.027 Y100.939 E0.00298 ; perimeter
G1 X113.155 Y100.963 E0.00605 ; perimeter
G1 X113.287 Y101.031 E0.00687 ; perimeter
G1 X113.363 Y101.099 E0.00472 ; perimeter
G1 X113.545 Y101.374 E0.01524 ; perimeter
G1 X113.675 Y101.741 E0.01804 ; perimeter
G1 X113.696 Y102.081 E0.01582 ; perimeter
G1 X113.671 Y102.193 E0.00529 ; perimeter
G1 X113.609 Y102.299 E0.00568 ; perimeter
G1 X113.533 Y102.355 E0.00437 ; perimeter
G1 X113.321 Y102.257 F10800.000 ; move inwards before travel
G1 X113.267 Y102.156 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.468204
G1 F2400.000
G1 X113.193 Y101.659 E0.01775 ; infill
;WIDTH:0.414968
G1 X113.194 Y101.642 E0.00054 ; infill
;WIDTH:0.40105
G1 X113.193 Y101.575 E0.00199 ; infill
;WIDTH:0.359049
G1 X113.152 Y101.234 E0.00903 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.193 Y101.575 E-0.09063 ; wipe and retract
;WIPE_END
G1 E-2.30937 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X111.029 Y98.436 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.827 Y98.531 E0.00756 ; perimeter
G1 X110.639 Y98.571 E0.00652 ; perimeter
G1 X110.627 Y98.319 E0.00854 ; perimeter
G1 X110.779 Y97.819 E0.01770 ; perimeter
G1 X110.832 Y97.885 E0.00287 ; perimeter
G1 X111.016 Y98.377 E0.01778 ; perimeter
G1 X110.630 Y97.632 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X110.134 Y97.321 E0.01981 ; perimeter
G1 X109.956 Y97.273 E0.00625 ; perimeter
G1 X109.887 Y97.226 E0.00283 ; perimeter
G1 X110.097 Y97.236 E0.00712 ; perimeter
G1 X110.273 Y97.298 E0.00631 ; perimeter
G1 X110.593 Y97.585 E0.01454 ; perimeter
G1 X110.235 Y97.953 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.939 Y97.768 E0.01614 ; perimeter
G1 X109.752 Y97.717 E0.00899 ; perimeter
G1 X109.300 Y97.425 E0.02493 ; perimeter
G1 X109.178 Y97.203 E0.01174 ; perimeter
G1 X109.108 Y97.041 E0.00815 ; perimeter
G1 X109.121 Y97.020 E0.00118 ; perimeter
G1 X109.441 Y96.804 E0.01788 ; perimeter
G1 X109.687 Y96.738 E0.01177 ; perimeter
G1 X110.164 Y96.757 E0.02214 ; perimeter
G1 X110.330 Y96.796 E0.00788 ; perimeter
G1 X110.534 Y96.887 E0.01036 ; perimeter
G1 X110.911 Y97.211 E0.02304 ; perimeter
G1 X111.255 Y97.642 E0.02554 ; perimeter
G1 X111.472 Y98.203 E0.02785 ; perimeter
G1 X111.518 Y98.419 E0.01022 ; perimeter
G1 X111.520 Y98.520 E0.00469 ; perimeter
G1 X111.481 Y98.682 E0.00769 ; perimeter
G1 X111.354 Y98.842 E0.00949 ; perimeter
G1 X111.284 Y98.888 E0.00385 ; perimeter
G1 X111.185 Y98.896 E0.00464 ; perimeter
G1 X110.992 Y98.987 E0.00986 ; perimeter
G1 X110.830 Y99.029 E0.00778 ; perimeter
G1 X110.373 Y99.103 E0.02144 ; perimeter
G1 X110.319 Y99.060 E0.00318 ; perimeter
G1 X110.163 Y98.698 E0.01822 ; perimeter
G1 X110.148 Y98.239 E0.02129 ; perimeter
G1 X110.217 Y98.010 E0.01107 ; perimeter
G1 X110.372 Y97.633 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.939 Y97.768 E-0.09733 ; wipe and retract
G1 X109.752 Y97.717 E-0.05119 ; wipe and retract
G1 X109.300 Y97.425 E-0.14200 ; wipe and retract
G1 X109.178 Y97.203 E-0.06688 ; wipe and retract
G1 X109.108 Y97.041 E-0.04645 ; wipe and retract
G1 X109.121 Y97.020 E-0.00672 ; wipe and retract
G1 X109.441 Y96.804 E-0.10185 ; wipe and retract
G1 X109.687 Y96.738 E-0.06704 ; wipe and retract
G1 X110.164 Y96.757 E-0.12611 ; wipe and retract
G1 X110.330 Y96.796 E-0.04489 ; wipe and retract
G1 X110.534 Y96.887 E-0.05900 ; wipe and retract
G1 X110.911 Y97.211 E-0.13125 ; wipe and retract
G1 X111.255 Y97.642 E-0.14551 ; wipe and retract
G1 X111.472 Y98.203 E-0.15868 ; wipe and retract
G1 X111.518 Y98.419 E-0.05823 ; wipe and retract
G1 X111.520 Y98.520 E-0.02671 ; wipe and retract
G1 X111.481 Y98.682 E-0.04379 ; wipe and retract
G1 X111.354 Y98.842 E-0.05408 ; wipe and retract
G1 X111.284 Y98.888 E-0.02195 ; wipe and retract
G1 X111.185 Y98.896 E-0.02644 ; wipe and retract
G1 X110.992 Y98.987 E-0.05617 ; wipe and retract
G1 X110.830 Y99.029 E-0.04431 ; wipe and retract
G1 X110.373 Y99.103 E-0.12217 ; wipe and retract
G1 X110.319 Y99.060 E-0.01814 ; wipe and retract
G1 X110.163 Y98.698 E-0.10379 ; wipe and retract
G1 X110.148 Y98.239 E-0.12127 ; wipe and retract
G1 X110.217 Y98.010 E-0.06309 ; wipe and retract
;WIPE_END
G1 E-0.39495 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X107.045 Y95.942 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.247 Y95.820 E0.01093 ; perimeter
G1 X107.507 Y95.785 E0.01215 ; perimeter
G1 X107.867 Y95.920 E0.01779 ; perimeter
G1 X108.061 Y96.055 E0.01095 ; perimeter
G1 X108.075 Y96.094 E0.00190 ; perimeter
G1 X108.238 Y96.245 E0.01031 ; perimeter
G1 X108.276 Y96.481 E0.01104 ; perimeter
G1 X108.160 Y96.536 E0.00598 ; perimeter
G1 X108.102 Y96.590 E0.00365 ; perimeter
G1 X107.913 Y96.617 E0.00884 ; perimeter
G1 X107.862 Y96.643 E0.00265 ; perimeter
G1 X107.535 Y96.656 E0.01516 ; perimeter
G1 X107.307 Y96.601 E0.01087 ; perimeter
G1 X107.107 Y96.515 E0.01010 ; perimeter
G1 X106.990 Y96.390 E0.00793 ; perimeter
G1 X106.941 Y96.222 E0.00811 ; perimeter
G1 X106.960 Y96.085 E0.00641 ; perimeter
G1 X107.015 Y95.993 E0.00493 ; perimeter
G1 X107.272 Y96.007 F10800.000 ; move inwards before travel
G1 X107.189 Y96.186 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273371
G1 F2400.000
G1 X107.306 Y96.200 E0.00225 ; infill
;WIDTH:0.291493
G1 X107.317 Y96.205 E0.00024 ; infill
;WIDTH:0.301291
G1 X107.934 Y96.291 E0.01339 ; infill
G1 X107.965 Y96.366 F10800.000 ; move to first infill point
;WIDTH:0.391113
G1 F2400.000
G1 X107.459 Y96.211 E0.01534 ; infill
G1 X107.188 Y96.196 E0.00785 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.459 Y96.211 E-0.07153 ; wipe and retract
G1 X107.965 Y96.366 E-0.13981 ; wipe and retract
;WIPE_END
G1 E-2.18866 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X104.081 Y94.538 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.990 Y94.748 E0.01059 ; perimeter
G1 X103.812 Y94.891 E0.01058 ; perimeter
G1 X103.490 Y94.945 E0.01512 ; perimeter
G1 X103.135 Y94.920 E0.01648 ; perimeter
G1 X102.866 Y94.798 E0.01367 ; perimeter
G1 X102.786 Y94.733 E0.00479 ; perimeter
G1 X102.726 Y94.615 E0.00610 ; perimeter
G1 X102.752 Y94.543 E0.00355 ; perimeter
G1 X102.748 Y94.446 E0.00451 ; perimeter
G1 X102.895 Y94.286 E0.01006 ; perimeter
G1 X103.068 Y94.182 E0.00935 ; perimeter
G1 X103.314 Y94.124 E0.01169 ; perimeter
G1 X103.779 Y94.143 E0.02157 ; perimeter
G1 X103.850 Y94.161 E0.00337 ; perimeter
G1 X103.943 Y94.225 E0.00526 ; perimeter
G1 X104.065 Y94.369 E0.00872 ; perimeter
G1 X104.090 Y94.479 E0.00524 ; perimeter
G1 X103.869 Y94.625 F10800.000 ; move inwards before travel
G1 X103.759 Y94.391 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.255453
G1 F2400.000
G1 X103.705 Y94.500 E0.00216 ; infill
G1 X103.648 Y94.526 E0.00111 ; infill
;WIDTH:0.372899
G1 X103.232 Y94.540 E0.01142 ; infill
;WIDTH:0.333353
G1 X103.009 Y94.518 E0.00540 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.232 Y94.540 E-0.05897 ; wipe and retract
;WIPE_END
G1 E-2.34103 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X100.684 Y95.029 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.607 Y95.209 E0.00907 ; perimeter
G1 X100.185 Y95.403 E0.02151 ; perimeter
G1 X100.001 Y95.440 E0.00872 ; perimeter
G1 X99.886 Y95.414 E0.00543 ; perimeter
G1 X99.798 Y95.343 E0.00525 ; perimeter
G1 X99.755 Y95.123 E0.01037 ; perimeter
G1 X99.805 Y94.985 E0.00681 ; perimeter
G1 X99.809 Y94.807 E0.00824 ; perimeter
G1 X99.896 Y94.683 E0.00703 ; perimeter
G1 X100.160 Y94.576 E0.01317 ; perimeter
G1 X100.352 Y94.564 E0.00894 ; perimeter
G1 X100.435 Y94.578 E0.00387 ; perimeter
G1 X100.603 Y94.733 E0.01061 ; perimeter
G1 X100.675 Y94.971 E0.01151 ; perimeter
G1 X100.505 Y95.110 F10800.000 ; move inwards before travel
G1 X99.278 Y96.219 ; move to first perimeter point
G1 F1800.000
G1 X99.311 Y96.604 E0.01791 ; perimeter
G1 X99.272 Y96.771 E0.00794 ; perimeter
G1 X99.150 Y97.016 E0.01271 ; perimeter
G1 X99.029 Y97.139 E0.00798 ; perimeter
G1 X98.899 Y97.177 E0.00628 ; perimeter
G1 X98.778 Y97.143 E0.00580 ; perimeter
G1 X98.577 Y97.026 E0.01078 ; perimeter
G1 X98.481 Y96.872 E0.00840 ; perimeter
G1 X98.455 Y96.635 E0.01103 ; perimeter
G1 X98.527 Y96.419 E0.01056 ; perimeter
G1 X98.586 Y96.323 E0.00523 ; perimeter
G1 X98.750 Y96.214 E0.00911 ; perimeter
G1 X99.007 Y96.105 E0.01293 ; perimeter
G1 X99.217 Y96.150 E0.00997 ; perimeter
G1 X99.238 Y96.174 E0.00146 ; perimeter
G1 X99.060 Y96.538 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.311 Y96.604 E-0.11505 ; wipe and retract
G1 X99.272 Y96.771 E-0.04522 ; wipe and retract
G1 X99.150 Y97.016 E-0.07238 ; wipe and retract
G1 X99.029 Y97.139 E-0.04545 ; wipe and retract
G1 X98.899 Y97.177 E-0.03575 ; wipe and retract
G1 X98.778 Y97.143 E-0.03304 ; wipe and retract
G1 X98.577 Y97.026 E-0.06142 ; wipe and retract
G1 X98.481 Y96.872 E-0.04785 ; wipe and retract
G1 X98.455 Y96.635 E-0.06281 ; wipe and retract
G1 X98.527 Y96.419 E-0.06014 ; wipe and retract
G1 X98.586 Y96.323 E-0.02980 ; wipe and retract
G1 X98.750 Y96.214 E-0.05190 ; wipe and retract
G1 X99.007 Y96.105 E-0.07365 ; wipe and retract
G1 X99.217 Y96.150 E-0.05683 ; wipe and retract
G1 X99.238 Y96.174 E-0.00831 ; wipe and retract
;WIPE_END
G1 E-1.60041 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X106.088 Y107.587 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.979 Y107.538 E0.00552 ; perimeter
G1 X105.759 Y107.582 E0.01038 ; perimeter
G1 X105.536 Y107.499 E0.01103 ; perimeter
G1 X105.371 Y107.500 E0.00764 ; perimeter
G1 X104.857 Y107.437 E0.02395 ; perimeter
G1 X104.160 Y107.400 E0.03233 ; perimeter
G1 X103.882 Y107.326 E0.01333 ; perimeter
G1 X103.368 Y106.968 E0.02902 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.296 Y106.918 E0.00365 ; perimeter (bridge)
G1 X103.195 Y106.763 E0.00774 ; perimeter (bridge)
G1 X103.090 Y106.672 E0.00581 ; perimeter (bridge)
G1 X103.225 Y106.724 E0.00604 ; perimeter (bridge)
G1 X103.360 Y106.836 E0.00733 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.448 Y106.707 E0.05076 ; perimeter
G1 X104.684 Y106.720 E0.01096 ; perimeter
G1 X104.813 Y106.682 E0.00624 ; perimeter
G1 X105.150 Y106.720 E0.01568 ; perimeter
G1 X105.493 Y106.849 E0.01698 ; perimeter
G1 X105.718 Y107.020 E0.01310 ; perimeter
G1 X105.963 Y107.334 E0.01846 ; perimeter
G1 X106.061 Y107.533 E0.01025 ; perimeter
G1 X105.990 Y107.518 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.979 Y107.538 E-0.02179 ; wipe and retract
G1 X105.759 Y107.582 E-0.05913 ; wipe and retract
G1 X105.536 Y107.499 E-0.06284 ; wipe and retract
G1 X105.371 Y107.500 E-0.04353 ; wipe and retract
G1 X104.857 Y107.437 E-0.13645 ; wipe and retract
G1 X104.160 Y107.400 E-0.18418 ; wipe and retract
G1 X103.882 Y107.326 E-0.07592 ; wipe and retract
G1 X103.368 Y106.968 E-0.16533 ; wipe and retract
;WIPE_END
G1 E-1.65083 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X99.008 Y99.782 ; move to first perimeter point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.181 Y99.918 E0.01017 ; perimeter
G1 X99.282 Y100.125 E0.01066 ; perimeter
G1 X99.374 Y100.544 E0.01986 ; perimeter
G1 X99.427 Y101.034 E0.02282 ; perimeter
G1 X99.418 Y101.121 E0.00408 ; perimeter
G1 X99.547 Y101.746 E0.02954 ; perimeter
G1 X99.693 Y102.209 E0.02249 ; perimeter
G1 X99.763 Y102.231 E0.00340 ; perimeter
G1 X99.833 Y102.360 E0.00676 ; perimeter
G1 X100.032 Y102.448 E0.01010 ; perimeter
G1 X100.076 Y102.510 E0.00351 ; perimeter
G1 X100.381 Y102.697 E0.01654 ; perimeter
G1 X100.824 Y103.181 E0.03039 ; perimeter
G1 X101.264 Y103.912 E0.03951 ; perimeter
G1 X101.403 Y104.178 E0.01391 ; perimeter
G1 X101.617 Y104.748 E0.02820 ; perimeter
G1 X101.804 Y105.439 E0.03315 ; perimeter
G1 X101.927 Y105.547 E0.00760 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.266 Y105.938 E0.02163 ; perimeter (bridge)
G1 X102.880 Y106.546 E0.03612 ; perimeter (bridge)
G1 X102.551 Y106.368 E0.01566 ; perimeter (bridge)
G1 X101.628 Y105.741 E0.04663 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.229 Y105.415 E0.02388 ; perimeter
G1 X101.057 Y105.191 E0.01303 ; perimeter
G1 X100.769 Y104.673 E0.02751 ; perimeter
G1 X100.674 Y104.362 E0.01502 ; perimeter
G1 X100.495 Y103.970 E0.01997 ; perimeter
G1 X99.934 Y103.343 E0.03901 ; perimeter
G1 X99.724 Y103.065 E0.01615 ; perimeter
G1 X99.536 Y102.703 E0.01889 ; perimeter
G1 X99.453 Y102.424 E0.01347 ; perimeter
G1 X99.374 Y102.255 E0.00865 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.312 Y102.120 E0.00619 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.263 Y102.013 E0.00546 ; perimeter
G1 X99.178 Y101.918 E0.00589 ; perimeter
G1 X98.936 Y101.513 E0.02189 ; perimeter
G1 X98.675 Y100.972 E0.02779 ; perimeter
G1 X98.569 Y100.521 E0.02148 ; perimeter
G1 X98.560 Y100.198 E0.01496 ; perimeter
G1 X98.651 Y99.965 E0.01158 ; perimeter
G1 X98.793 Y99.806 E0.00989 ; perimeter
G1 X98.875 Y99.760 E0.00433 ; perimeter
G1 X98.949 Y99.773 E0.00349 ; perimeter
G1 X99.033 Y100.001 F10800.000 ; move inwards before travel
G1 X98.959 Y100.050 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.276191
G1 F2400.000
G1 X98.933 Y100.283 E0.00454 ; infill
G1 X98.957 Y100.466 E0.00358 ; infill
G1 X99.030 Y100.847 E0.00751 ; infill
G1 X99.212 Y101.484 E0.01286 ; infill
G1 X99.794 Y102.676 F10800.000 ; move to first infill point
;WIDTH:0.248933
G1 F2400.000
G1 X100.139 Y102.990 E0.00799 ; infill
G1 X100.514 Y103.413 E0.00967 ; infill
G1 X100.792 Y103.794 E0.00810 ; infill
;WIDTH:0.285641
G1 X100.948 Y104.089 E0.00672 ; infill
;WIDTH:0.29933
G1 X101.278 Y104.857 E0.01783 ; infill
;WIDTH:0.18855
G1 X101.487 Y105.306 E0.00600 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.278 Y104.857 E-0.13075 ; wipe and retract
;WIPE_END
G1 E-2.26925 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 X103.905 Y107.048 ; move to first infill point
G1 Z14.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.187084
G1 F2400.000
G1 X104.059 Y107.059 E0.00185 ; infill
;WIDTH:0.225698
G1 X104.213 Y107.069 E0.00235 ; infill
;WIDTH:0.268266
G1 X104.706 Y107.075 E0.00925 ; infill
;WIDTH:0.275464
G1 X104.846 Y107.062 E0.00272 ; infill
G1 X105.062 Y107.086 E0.00419 ; infill
G1 X105.558 Y107.208 E0.00989 ; infill
;LAYER_CHANGE
;Z:15
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;15
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.062 Y107.086 E-0.13492 ; wipe and retract
G1 X104.846 Y107.062 E-0.05725 ; wipe and retract
G1 X104.706 Y107.075 E-0.03707 ; wipe and retract
;WIPE_END
G1 E-2.17077 F2400.000 ; retract
G1 Z14.875 F10800.000 ; lift Z
G1 Z15.000 ; move to next layer (74)
;AFTER_LAYER_CHANGE
;15
G1 Z15.075 ; lift Z
G1 X107.208 Y108.820 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.381 Y108.782 E0.00819 ; perimeter
G1 X107.490 Y108.813 E0.00524 ; perimeter
G1 X107.641 Y108.917 E0.00850 ; perimeter
G1 X107.880 Y109.219 E0.01783 ; perimeter
G1 X107.953 Y109.379 E0.00813 ; perimeter
G1 X107.956 Y109.464 E0.00395 ; perimeter
G1 X108.051 Y109.719 E0.01262 ; perimeter
G1 X108.062 Y109.871 E0.00707 ; perimeter
G1 X108.033 Y110.046 E0.00820 ; perimeter
G1 X107.918 Y110.174 E0.00799 ; perimeter
G1 X107.804 Y110.173 E0.00529 ; perimeter
G1 X107.533 Y110.031 E0.01417 ; perimeter
G1 X107.365 Y109.857 E0.01118 ; perimeter
G1 X107.227 Y109.630 E0.01229 ; perimeter
G1 X107.125 Y109.352 E0.01371 ; perimeter
G1 X107.102 Y109.056 E0.01376 ; perimeter
G1 X107.136 Y108.931 E0.00604 ; perimeter
G1 X107.175 Y108.870 E0.00334 ; perimeter
G1 X107.362 Y108.908 F10800.000 ; move inwards before travel
G1 X107.351 Y109.057 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.284223
G1 F2400.000
G1 X107.554 Y109.418 E0.00831 ; infill
G1 X107.760 Y109.878 E0.01011 ; infill
G1 X107.817 Y109.873 F10800.000 ; move to first infill point
;WIDTH:0.202498
G1 F2400.000
G1 X107.397 Y109.394 E0.00844 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.817 Y109.873 E-0.16795 ; wipe and retract
;WIPE_END
G1 E-2.23205 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X109.124 Y112.919 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.360 Y112.803 E0.01218 ; perimeter
G1 X109.628 Y112.844 E0.01259 ; perimeter
G1 X109.746 Y112.961 E0.00765 ; perimeter
G1 X109.791 Y113.061 E0.00510 ; perimeter
G1 X109.821 Y113.210 E0.00703 ; perimeter
G1 X109.798 Y113.372 E0.00759 ; perimeter
G1 X109.819 Y113.467 E0.00450 ; perimeter
G1 X109.677 Y113.969 E0.02420 ; perimeter
G1 X109.531 Y113.947 E0.00684 ; perimeter
G1 X109.197 Y113.806 E0.01682 ; perimeter
G1 X108.975 Y113.521 E0.01672 ; perimeter
G1 X108.946 Y113.369 E0.00714 ; perimeter
G1 X108.977 Y113.149 E0.01030 ; perimeter
G1 X109.092 Y112.969 E0.00987 ; perimeter
G1 X109.371 Y113.007 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.360 Y112.803 E-0.08330 ; wipe and retract
G1 X109.628 Y112.844 E-0.07171 ; wipe and retract
G1 X109.746 Y112.961 E-0.04358 ; wipe and retract
G1 X109.791 Y113.061 E-0.02907 ; wipe and retract
G1 X109.821 Y113.210 E-0.04003 ; wipe and retract
G1 X109.798 Y113.372 E-0.04326 ; wipe and retract
G1 X109.819 Y113.467 E-0.02561 ; wipe and retract
G1 X109.677 Y113.969 E-0.13787 ; wipe and retract
G1 X109.531 Y113.947 E-0.03898 ; wipe and retract
G1 X109.197 Y113.806 E-0.09583 ; wipe and retract
G1 X108.975 Y113.521 E-0.09523 ; wipe and retract
G1 X108.946 Y113.369 E-0.04068 ; wipe and retract
G1 X108.977 Y113.149 E-0.05867 ; wipe and retract
G1 X109.092 Y112.969 E-0.05625 ; wipe and retract
;WIPE_END
G1 E-1.53992 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X110.900 Y115.204 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.998 Y115.267 E0.00539 ; perimeter
G1 X111.307 Y115.293 E0.01434 ; perimeter
G1 X111.466 Y115.339 E0.00767 ; perimeter
G1 X111.666 Y115.318 E0.00933 ; perimeter
G1 X111.999 Y115.437 E0.01638 ; perimeter
G1 X112.105 Y115.533 E0.00664 ; perimeter
G1 X112.170 Y115.731 E0.00961 ; perimeter
G1 X112.141 Y115.904 E0.00812 ; perimeter
G1 X112.034 Y116.050 E0.00841 ; perimeter
G1 X111.927 Y116.122 E0.00596 ; perimeter
G1 X111.817 Y116.155 E0.00533 ; perimeter
G1 X111.611 Y116.150 E0.00953 ; perimeter
G1 X111.366 Y116.060 E0.01209 ; perimeter
G1 X111.120 Y115.817 E0.01603 ; perimeter
G1 X111.024 Y115.676 E0.00788 ; perimeter
G1 X111.010 Y115.594 E0.00389 ; perimeter
G1 X110.863 Y115.386 E0.01178 ; perimeter
G1 X110.888 Y115.263 E0.00585 ; perimeter
G1 X110.980 Y115.289 F10800.000 ; move inwards before travel
G1 X111.255 Y115.586 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.223071
G1 F2400.000
G1 X111.875 Y115.859 E0.01016 ; infill
G1 X111.761 Y115.765 F10800.000 ; move to first infill point
;WIDTH:0.361944
G1 F2400.000
G1 X111.604 Y115.724 E0.00430 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.761 Y115.765 E-0.04280 ; wipe and retract
;WIPE_END
G1 E-2.35720 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X114.390 Y115.434 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.452 Y115.310 E0.00644 ; perimeter
G1 X114.966 Y114.780 E0.03418 ; perimeter
G1 X115.144 Y114.476 E0.01632 ; perimeter
G1 X115.230 Y114.163 E0.01504 ; perimeter
G1 X115.255 Y113.749 E0.01920 ; perimeter
G1 X115.154 Y113.134 E0.02888 ; perimeter
G1 X115.122 Y112.720 E0.01924 ; perimeter
G1 X115.140 Y112.443 E0.01285 ; perimeter
G1 X115.182 Y112.331 E0.00551 ; perimeter
G1 X115.348 Y112.174 E0.01060 ; perimeter
G1 X115.567 Y112.171 E0.01016 ; perimeter
G1 X115.754 Y112.225 E0.00900 ; perimeter
G1 X115.848 Y112.305 E0.00572 ; perimeter
G1 X115.896 Y112.451 E0.00709 ; perimeter
G1 X115.877 Y113.139 E0.03189 ; perimeter
G1 X115.831 Y113.273 E0.00657 ; perimeter
G1 X115.694 Y113.946 E0.03181 ; perimeter
G1 X115.834 Y114.872 E0.04337 ; perimeter
G1 X115.796 Y115.063 E0.00902 ; perimeter
G1 X115.756 Y115.136 E0.00386 ; perimeter
G1 X115.335 Y115.545 E0.02722 ; perimeter
G1 X115.108 Y115.809 E0.01608 ; perimeter
G1 X114.947 Y115.937 E0.00953 ; perimeter
G1 X114.825 Y115.988 E0.00612 ; perimeter
G1 X114.757 Y116.002 E0.00325 ; perimeter
G1 X114.608 Y115.956 E0.00723 ; perimeter
G1 X114.497 Y115.890 E0.00598 ; perimeter
G1 X114.437 Y115.819 E0.00427 ; perimeter
G1 X114.386 Y115.698 E0.00610 ; perimeter
G1 X114.381 Y115.493 E0.00949 ; perimeter
G1 X114.524 Y115.399 F10800.000 ; move inwards before travel
G1 X114.781 Y115.552 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.358322
G1 F2400.000
G1 X115.049 Y115.267 E0.01025 ; infill
;WIDTH:0.373224
G1 X115.302 Y115.010 E0.00991 ; infill
;WIDTH:0.414019
G1 X115.395 Y114.891 E0.00467 ; infill
G1 X115.537 Y114.518 E0.01231 ; infill
G1 X115.498 Y114.261 F10800.000 ; move to first infill point
;WIDTH:0.239649
G1 F2400.000
G1 X115.385 Y115.160 E0.01483 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.498 Y114.261 E-0.23920 ; wipe and retract
;WIPE_END
G1 E-2.16080 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X115.514 Y112.552 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.330917
G1 F2400.000
G1 X115.517 Y112.969 E0.00998 ; infill
;WIDTH:0.309296
G1 X115.516 Y113.061 E0.00204 ; infill
;WIDTH:0.293641
G1 X115.459 Y113.506 E0.00936 ; infill
G1 X115.496 Y113.597 F10800.000 ; move to first infill point
;WIDTH:0.142448
G1 F2400.000
G1 X115.499 Y113.461 E0.00112 ; infill
;WIDTH:0.187976
G1 X115.502 Y113.326 E0.00163 ; infill
;WIDTH:0.238981
G1 X115.544 Y112.415 E0.01486 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.502 Y113.326 E-0.24061 ; wipe and retract
;WIPE_END
G1 E-2.15939 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X115.702 Y105.656 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.524 Y105.706 E0.00859 ; perimeter
G1 X115.403 Y105.696 E0.00561 ; perimeter
G1 X115.283 Y105.637 E0.00621 ; perimeter
G1 X115.166 Y105.470 E0.00944 ; perimeter
G1 X115.132 Y105.333 E0.00656 ; perimeter
G1 X115.162 Y105.114 E0.01023 ; perimeter
G1 X115.212 Y105.020 E0.00495 ; perimeter
G1 X115.290 Y104.950 E0.00483 ; perimeter
G1 X115.414 Y104.898 E0.00621 ; perimeter
G1 X115.570 Y104.906 E0.00723 ; perimeter
G1 X115.747 Y104.965 E0.00865 ; perimeter
G1 X115.822 Y105.034 E0.00470 ; perimeter
G1 X115.849 Y105.076 E0.00231 ; perimeter
G1 X115.893 Y105.330 E0.01193 ; perimeter
G1 X115.864 Y105.482 E0.00720 ; perimeter
G1 X115.820 Y105.561 E0.00416 ; perimeter
G1 X115.749 Y105.618 E0.00424 ; perimeter
G1 X115.548 Y105.553 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.524 Y105.706 E-0.06382 ; wipe and retract
G1 X115.403 Y105.696 E-0.03194 ; wipe and retract
G1 X115.283 Y105.637 E-0.03536 ; wipe and retract
G1 X115.166 Y105.470 E-0.05376 ; wipe and retract
G1 X115.132 Y105.333 E-0.03740 ; wipe and retract
G1 X115.162 Y105.114 E-0.05828 ; wipe and retract
G1 X115.212 Y105.020 E-0.02820 ; wipe and retract
G1 X115.290 Y104.950 E-0.02753 ; wipe and retract
G1 X115.414 Y104.898 E-0.03538 ; wipe and retract
G1 X115.570 Y104.906 E-0.04119 ; wipe and retract
G1 X115.747 Y104.965 E-0.04926 ; wipe and retract
G1 X115.822 Y105.034 E-0.02678 ; wipe and retract
G1 X115.849 Y105.076 E-0.01315 ; wipe and retract
G1 X115.893 Y105.330 E-0.06799 ; wipe and retract
G1 X115.864 Y105.482 E-0.04101 ; wipe and retract
G1 X115.820 Y105.561 E-0.02370 ; wipe and retract
G1 X115.749 Y105.618 E-0.02416 ; wipe and retract
;WIPE_END
G1 E-1.74110 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X113.391 Y102.232 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.260 Y102.231 E0.00607 ; perimeter
G1 X113.010 Y102.103 E0.01302 ; perimeter
G1 X112.904 Y101.985 E0.00734 ; perimeter
G1 X112.792 Y101.721 E0.01327 ; perimeter
G1 X112.787 Y101.485 E0.01096 ; perimeter
G1 X112.726 Y101.295 E0.00923 ; perimeter
G1 X112.747 Y101.095 E0.00929 ; perimeter
G1 X112.724 Y100.998 E0.00462 ; perimeter
G1 X112.775 Y100.831 E0.00809 ; perimeter
G1 X112.760 Y100.728 E0.00485 ; perimeter
G1 X112.855 Y100.603 E0.00724 ; perimeter
G1 X112.992 Y100.705 E0.00791 ; perimeter
G1 X113.096 Y100.723 E0.00490 ; perimeter
G1 X113.171 Y100.798 E0.00489 ; perimeter
G1 X113.281 Y100.856 E0.00576 ; perimeter
G1 X113.476 Y101.127 E0.01547 ; perimeter
G1 X113.601 Y101.492 E0.01786 ; perimeter
G1 X113.632 Y101.736 E0.01142 ; perimeter
G1 X113.590 Y102.001 E0.01244 ; perimeter
G1 X113.508 Y102.150 E0.00787 ; perimeter
G1 X113.441 Y102.197 E0.00380 ; perimeter
G1 X113.297 Y102.141 F10800.000 ; move inwards before travel
G1 X113.295 Y101.978 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333532
G1 F2400.000
G1 X113.235 Y101.775 E0.00511 ; infill
G1 X113.163 Y101.401 E0.00920 ; infill
G1 X112.978 Y100.993 E0.01081 ; infill
G1 X113.367 Y101.557 F10800.000 ; move to first infill point
;WIDTH:0.109011
G1 F2400.000
G1 X112.984 Y100.975 E0.00383 ; infill
G1 X112.984 Y100.972 F10800.000 ; move to first infill point
;WIDTH:0.178521
G1 F2400.000
G1 X113.059 Y101.087 E0.00155 ; infill
;WIDTH:0.204835
G1 X113.384 Y101.697 E0.00930 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.059 Y101.087 E-0.18235 ; wipe and retract
;WIPE_END
G1 E-2.21765 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X111.141 Y98.475 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.892 Y98.464 E0.00846 ; perimeter
G1 X110.865 Y98.296 E0.00573 ; perimeter
G1 X110.868 Y97.828 E0.01585 ; perimeter
G1 X110.508 Y97.341 E0.02049 ; perimeter
G1 X110.168 Y97.250 E0.01191 ; perimeter
G1 X110.083 Y97.195 E0.00342 ; perimeter
G1 X110.403 Y97.281 E0.01121 ; perimeter
G1 X110.668 Y97.422 E0.01019 ; perimeter
G1 X110.815 Y97.563 E0.00690 ; perimeter
G1 X110.876 Y97.640 E0.00329 ; perimeter
G1 X111.028 Y97.983 E0.01271 ; perimeter
G1 X111.128 Y98.417 E0.01507 ; perimeter
G1 X110.220 Y97.763 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.971 Y97.696 E0.01194 ; perimeter
G1 X109.422 Y97.376 E0.02944 ; perimeter
G1 X109.367 Y97.277 E0.00524 ; perimeter
G1 X109.087 Y96.998 E0.01834 ; perimeter
G1 X109.030 Y96.985 E0.00269 ; perimeter
G1 X108.946 Y96.799 E0.00947 ; perimeter
G1 X108.389 Y96.679 E0.02638 ; perimeter
G1 X108.203 Y96.713 E0.00875 ; perimeter
G1 X108.014 Y96.690 E0.00885 ; perimeter
G1 X107.766 Y96.698 E0.01149 ; perimeter
G1 X107.354 Y96.586 E0.01977 ; perimeter
G1 X107.155 Y96.476 E0.01053 ; perimeter
G1 X107.084 Y96.371 E0.00587 ; perimeter
G1 X107.043 Y96.212 E0.00763 ; perimeter
G1 X107.129 Y95.917 E0.01420 ; perimeter
G1 X107.307 Y95.799 E0.00991 ; perimeter
G1 X107.603 Y95.762 E0.01378 ; perimeter
G1 X107.963 Y95.911 E0.01807 ; perimeter
G1 X108.346 Y96.150 E0.02093 ; perimeter
G1 X108.536 Y96.328 E0.01203 ; perimeter
G1 X108.644 Y96.396 E0.00594 ; perimeter
G1 X108.766 Y96.571 E0.00988 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.792 Y96.609 E0.00190 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.830 Y96.663 E0.00308 ; perimeter
G1 X109.239 Y96.752 E0.01940 ; perimeter
G1 X109.503 Y96.752 E0.01221 ; perimeter
G1 X109.699 Y96.701 E0.00936 ; perimeter
G1 X110.251 Y96.727 E0.02563 ; perimeter
G1 X110.591 Y96.834 E0.01648 ; perimeter
G1 X110.954 Y97.028 E0.01909 ; perimeter
G1 X111.172 Y97.238 E0.01401 ; perimeter
G1 X111.286 Y97.381 E0.00845 ; perimeter
G1 X111.414 Y97.642 E0.01346 ; perimeter
G1 X111.490 Y97.842 E0.00995 ; perimeter
G1 X111.646 Y98.520 E0.03221 ; perimeter
G1 X111.631 Y98.638 E0.00550 ; perimeter
G1 X111.643 Y98.798 E0.00744 ; perimeter
G1 X111.461 Y98.962 E0.01137 ; perimeter
G1 X111.170 Y98.980 E0.01353 ; perimeter
G1 X111.037 Y98.946 E0.00634 ; perimeter
G1 X110.743 Y98.953 E0.01364 ; perimeter
G1 X110.595 Y98.899 E0.00730 ; perimeter
G1 X110.443 Y98.786 E0.00874 ; perimeter
G1 X110.427 Y98.747 E0.00197 ; perimeter
G1 X110.382 Y98.342 E0.01885 ; perimeter
G1 X110.385 Y97.986 E0.01652 ; perimeter
G1 X110.256 Y97.811 E0.01004 ; perimeter
G1 X110.242 Y97.506 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.971 Y97.696 E-0.08101 ; wipe and retract
G1 X109.422 Y97.376 E-0.16773 ; wipe and retract
G1 X109.367 Y97.277 E-0.02985 ; wipe and retract
G1 X109.087 Y96.998 E-0.10447 ; wipe and retract
G1 X109.030 Y96.985 E-0.01530 ; wipe and retract
G1 X108.946 Y96.799 E-0.05398 ; wipe and retract
G1 X108.389 Y96.679 E-0.15026 ; wipe and retract
G1 X108.203 Y96.713 E-0.04982 ; wipe and retract
G1 X108.014 Y96.690 E-0.05043 ; wipe and retract
G1 X107.766 Y96.698 E-0.06544 ; wipe and retract
G1 X107.354 Y96.586 E-0.11260 ; wipe and retract
G1 X107.155 Y96.476 E-0.05999 ; wipe and retract
G1 X107.084 Y96.371 E-0.03345 ; wipe and retract
G1 X107.043 Y96.212 E-0.04349 ; wipe and retract
G1 X107.129 Y95.917 E-0.08091 ; wipe and retract
G1 X107.307 Y95.799 E-0.05648 ; wipe and retract
G1 X107.603 Y95.762 E-0.07851 ; wipe and retract
G1 X107.963 Y95.911 E-0.10293 ; wipe and retract
G1 X108.346 Y96.150 E-0.11923 ; wipe and retract
G1 X108.536 Y96.328 E-0.06855 ; wipe and retract
G1 X108.644 Y96.396 E-0.03382 ; wipe and retract
G1 X108.766 Y96.571 E-0.05628 ; wipe and retract
;WIPE_END
G1 E-0.78548 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X108.280 Y96.454 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.169683
G1 F2400.000
G1 X108.170 Y96.402 E0.00128 ; infill
G1 X107.320 Y96.124 E0.00943 ; infill
G1 X107.360 Y96.053 F10800.000 ; move to first infill point
;WIDTH:0.341594
G1 F2400.000
G1 X107.419 Y96.119 E0.00220 ; infill
;WIDTH:0.383852
G1 X107.478 Y96.186 E0.00251 ; infill
G1 X107.767 Y96.276 E0.00859 ; infill
G1 X108.179 Y96.467 E0.01287 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.767 Y96.276 E-0.11983 ; wipe and retract
G1 X107.478 Y96.186 E-0.07999 ; wipe and retract
G1 X107.419 Y96.119 E-0.02339 ; wipe and retract
;WIPE_END
G1 E-2.17679 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X104.234 Y94.405 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.246 Y94.516 E0.00519 ; perimeter
G1 X104.168 Y94.660 E0.00758 ; perimeter
G1 X103.912 Y94.866 E0.01521 ; perimeter
G1 X103.731 Y94.930 E0.00892 ; perimeter
G1 X102.941 Y94.925 E0.03659 ; perimeter
G1 X102.733 Y94.858 E0.01014 ; perimeter
G1 X102.686 Y94.819 E0.00281 ; perimeter
G1 X102.437 Y94.730 E0.01227 ; perimeter
G1 X102.423 Y94.541 E0.00878 ; perimeter
G1 X102.636 Y94.327 E0.01399 ; perimeter
G1 X102.939 Y94.170 E0.01582 ; perimeter
G1 X103.033 Y94.148 E0.00447 ; perimeter
G1 X103.300 Y94.113 E0.01246 ; perimeter
G1 X103.871 Y94.119 E0.02645 ; perimeter
G1 X104.028 Y94.158 E0.00749 ; perimeter
G1 X104.140 Y94.242 E0.00649 ; perimeter
G1 X104.204 Y94.353 E0.00590 ; perimeter
G1 X104.158 Y94.487 F10800.000 ; move inwards before travel
G1 X103.995 Y94.472 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.383772
G1 F2400.000
G1 X103.662 Y94.518 E0.00953 ; infill
G1 X103.332 Y94.520 E0.00935 ; infill
;WIDTH:0.376089
G1 X103.104 Y94.534 E0.00632 ; infill
;WIDTH:0.345116
G1 X102.727 Y94.577 E0.00954 ; infill
G1 X100.760 Y94.815 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.756 Y94.953 E0.00638 ; perimeter
G1 X100.722 Y95.113 E0.00756 ; perimeter
G1 X100.638 Y95.217 E0.00621 ; perimeter
G1 X100.412 Y95.320 E0.01150 ; perimeter
G1 X100.039 Y95.541 E0.02010 ; perimeter
G1 X99.956 Y95.522 E0.00393 ; perimeter
G1 X99.750 Y95.633 E0.01083 ; perimeter
G1 X99.488 Y95.891 E0.01706 ; perimeter
G1 X99.444 Y96.170 E0.01306 ; perimeter
G1 X99.384 Y96.308 E0.00699 ; perimeter
G1 X99.384 Y96.448 E0.00647 ; perimeter
G1 X99.307 Y96.759 E0.01486 ; perimeter
G1 X99.179 Y96.949 E0.01056 ; perimeter
G1 X99.054 Y97.084 E0.00853 ; perimeter
G1 X98.949 Y97.126 E0.00526 ; perimeter
G1 X98.756 Y97.081 E0.00917 ; perimeter
G1 X98.603 Y96.981 E0.00845 ; perimeter
G1 X98.515 Y96.814 E0.00876 ; perimeter
G1 X98.488 Y96.630 E0.00862 ; perimeter
G1 X98.552 Y96.402 E0.01097 ; perimeter
G1 X98.597 Y96.328 E0.00398 ; perimeter
G1 X98.709 Y96.255 E0.00624 ; perimeter
G1 X98.781 Y96.179 E0.00482 ; perimeter
G1 X99.129 Y95.992 E0.01828 ; perimeter
G1 X99.241 Y95.892 E0.00699 ; perimeter
G1 X99.505 Y95.805 E0.01286 ; perimeter
G1 X99.670 Y95.306 E0.02434 ; perimeter
G1 X99.710 Y95.046 E0.01220 ; perimeter
G1 X99.811 Y94.803 E0.01219 ; perimeter
G1 X99.910 Y94.680 E0.00731 ; perimeter
G1 X100.210 Y94.561 E0.01494 ; perimeter
G1 X100.444 Y94.571 E0.01084 ; perimeter
G1 X100.737 Y94.730 E0.01547 ; perimeter
G1 X100.745 Y94.757 E0.00132 ; perimeter
G1 X100.665 Y94.915 F10800.000 ; move inwards before travel
G1 X99.925 Y95.235 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.178291
G1 F2400.000
G1 X100.514 Y94.876 E0.00776 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.925 Y95.235 E-0.18198 ; wipe and retract
;WIPE_END
G1 E-2.21802 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X99.056 Y99.925 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.193 Y100.013 E0.00755 ; perimeter
G1 X99.291 Y100.180 E0.00894 ; perimeter
G1 X99.435 Y100.814 E0.03010 ; perimeter
G1 X99.471 Y101.090 E0.01290 ; perimeter
G1 X99.672 Y101.690 E0.02934 ; perimeter
G1 X99.902 Y102.164 E0.02439 ; perimeter
G1 X100.124 Y102.462 E0.01724 ; perimeter
G1 X100.273 Y102.554 E0.00808 ; perimeter
G1 X100.585 Y102.926 E0.02249 ; perimeter
G1 X100.827 Y103.342 E0.02231 ; perimeter
G1 X100.909 Y103.645 E0.01455 ; perimeter
G1 X101.278 Y104.084 E0.02654 ; perimeter
G1 X101.568 Y104.587 E0.02689 ; perimeter
G1 X101.787 Y105.099 E0.02582 ; perimeter
G1 X101.962 Y105.342 E0.01385 ; perimeter
G1 X101.992 Y105.440 E0.00475 ; perimeter
G1 X103.445 Y106.709 E0.08937 ; perimeter
G1 X103.761 Y106.670 E0.01474 ; perimeter
G1 X103.876 Y106.711 E0.00568 ; perimeter
G1 X104.112 Y106.726 E0.01092 ; perimeter
G1 X104.334 Y106.704 E0.01035 ; perimeter
G1 X104.766 Y106.728 E0.02003 ; perimeter
G1 X104.943 Y106.757 E0.00830 ; perimeter
G1 X105.243 Y106.865 E0.01480 ; perimeter
G1 X105.463 Y107.061 E0.01364 ; perimeter
G1 X105.512 Y107.121 E0.00358 ; perimeter
G1 X105.560 Y107.245 E0.00614 ; perimeter
G1 X105.546 Y107.308 E0.00302 ; perimeter
G1 X105.280 Y107.377 E0.01273 ; perimeter
G1 X105.037 Y107.363 E0.01125 ; perimeter
G1 X104.500 Y107.431 E0.02507 ; perimeter
G1 X103.848 Y107.412 E0.03022 ; perimeter
G1 X103.642 Y107.368 E0.00976 ; perimeter
G1 X103.131 Y107.053 E0.02779 ; perimeter
G1 X102.395 Y106.482 E0.04315 ; perimeter
G1 X102.127 Y106.317 E0.01457 ; perimeter
G1 X101.772 Y106.054 E0.02046 ; perimeter
G1 X101.266 Y105.634 E0.03049 ; perimeter
G1 X101.048 Y105.319 E0.01771 ; perimeter
G1 X100.853 Y104.855 E0.02332 ; perimeter
G1 X100.742 Y104.471 E0.01853 ; perimeter
G1 X100.656 Y104.284 E0.00953 ; perimeter
G1 X100.607 Y104.048 E0.01114 ; perimeter
G1 X100.471 Y103.794 E0.01339 ; perimeter
G1 X100.258 Y103.639 E0.01218 ; perimeter
G1 X100.013 Y103.379 E0.01654 ; perimeter
G1 X99.771 Y103.176 E0.01463 ; perimeter
G1 X99.529 Y102.871 E0.01802 ; perimeter
G1 X99.115 Y102.088 E0.04105 ; perimeter
G1 X98.670 Y101.090 E0.05063 ; perimeter
G1 X98.553 Y100.552 E0.02549 ; perimeter
G1 X98.553 Y100.219 E0.01540 ; perimeter
G1 X98.612 Y100.083 E0.00686 ; perimeter
G1 X98.779 Y99.933 E0.01040 ; perimeter
G1 X98.938 Y99.888 E0.00766 ; perimeter
G1 X98.999 Y99.907 E0.00295 ; perimeter
G1 X99.081 Y100.087 F10800.000 ; move inwards before travel
G1 X98.926 Y100.320 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.315722
G1 F2400.000
G1 X99.052 Y100.964 E0.01489 ; infill
G1 X99.107 Y101.161 E0.00462 ; infill
;WIDTH:0.300724
G1 X99.237 Y101.498 E0.00775 ; infill
;WIDTH:0.263569
G1 X99.359 Y101.811 E0.00617 ; infill
;WIDTH:0.23122
G1 X99.615 Y102.329 E0.00903 ; infill
;WIDTH:0.221151
G1 X99.895 Y102.748 E0.00747 ; infill
;WIDTH:0.315339
G1 X100.259 Y103.107 E0.01159 ; infill
;WIDTH:0.29298
G1 X100.454 Y103.361 E0.00666 ; infill
;WIDTH:0.253459
G1 X100.622 Y103.587 E0.00492 ; infill
G1 X100.846 Y104.012 F10800.000 ; move to first infill point
;WIDTH:0.213994
G1 F2400.000
G1 X101.010 Y104.272 E0.00436 ; infill
;WIDTH:0.224492
G1 X101.055 Y104.362 E0.00152 ; infill
;WIDTH:0.272287
G1 X101.133 Y104.545 E0.00380 ; infill
;WIDTH:0.29492
G1 X101.386 Y105.134 E0.01343 ; infill
G1 X101.474 Y105.292 E0.00379 ; infill
G1 X101.539 Y105.384 E0.00236 ; infill
G1 X102.140 Y106.026 E0.01843 ; infill
G1 X102.492 Y106.229 F10800.000 ; move to first infill point
;WIDTH:0.134435
G1 F2400.000
G1 X101.960 Y105.815 E0.00513 ; infill
G1 X101.713 Y105.598 E0.00251 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.960 Y105.815 E-0.08693 ; wipe and retract
G1 X102.492 Y106.229 E-0.17785 ; wipe and retract
;WIPE_END
G1 E-2.13522 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 X103.557 Y106.938 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.234023
G1 F2400.000
G1 X103.773 Y107.042 E0.00381 ; infill
G1 X103.891 Y107.063 E0.00189 ; infill
G1 X105.101 Y107.070 E0.01923 ; infill
;LAYER_CHANGE
;Z:15.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;15.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.891 Y107.063 E-0.31931 ; wipe and retract
G1 X103.773 Y107.042 E-0.03147 ; wipe and retract
G1 X103.557 Y106.938 E-0.06332 ; wipe and retract
;WIPE_END
G1 E-1.98590 F2400.000 ; retract
G1 Z15.075 F10800.000 ; lift Z
G1 Z15.200 ; move to next layer (75)
;AFTER_LAYER_CHANGE
;15.2
G1 Z15.275 ; lift Z
G1 X100.854 Y104.047 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.536 Y103.707 E0.02158 ; perimeter
G1 X100.472 Y103.587 E0.00628 ; perimeter
G1 X99.988 Y103.324 E0.02552 ; perimeter
G1 X99.770 Y103.129 E0.01353 ; perimeter
G1 X99.627 Y103.035 E0.00795 ; perimeter
G1 X99.340 Y102.678 E0.02124 ; perimeter
G1 X99.233 Y102.479 E0.01044 ; perimeter
G1 X99.042 Y102.049 E0.02179 ; perimeter
G1 X98.665 Y101.081 E0.04811 ; perimeter
G1 X98.548 Y100.577 E0.02397 ; perimeter
G1 X98.546 Y100.242 E0.01552 ; perimeter
G1 X98.601 Y100.096 E0.00724 ; perimeter
G1 X98.777 Y99.955 E0.01044 ; perimeter
G1 X98.934 Y99.905 E0.00765 ; perimeter
G1 X99.037 Y99.941 E0.00504 ; perimeter
G1 X99.284 Y100.150 E0.01499 ; perimeter
G1 X99.489 Y101.082 E0.04419 ; perimeter
G1 X99.692 Y101.647 E0.02779 ; perimeter
G1 X100.125 Y102.358 E0.03859 ; perimeter
G1 X100.352 Y102.652 E0.01718 ; perimeter
G1 X100.364 Y102.730 E0.00365 ; perimeter
G1 X100.571 Y103.080 E0.01883 ; perimeter
G1 X100.640 Y103.307 E0.01100 ; perimeter
G1 X100.730 Y103.724 E0.01974 ; perimeter
G1 X101.061 Y104.088 E0.02279 ; perimeter
G1 X101.366 Y104.360 E0.01896 ; perimeter
G1 X101.657 Y104.785 E0.02384 ; perimeter
G1 X101.782 Y105.065 E0.01419 ; perimeter
G1 X102.078 Y105.427 E0.02167 ; perimeter
G1 X103.050 Y106.219 E0.05808 ; perimeter
G1 X103.491 Y106.534 E0.02511 ; perimeter
G1 X103.868 Y106.674 E0.01862 ; perimeter
G1 X104.466 Y106.732 E0.02780 ; perimeter
G1 X104.868 Y106.840 E0.01929 ; perimeter
G1 X104.965 Y106.897 E0.00523 ; perimeter
G1 X105.124 Y107.042 E0.00996 ; perimeter
G1 X105.142 Y107.175 E0.00622 ; perimeter
G1 X104.958 Y107.221 E0.00875 ; perimeter
G1 X104.785 Y107.346 E0.00990 ; perimeter
G1 X104.573 Y107.385 E0.01000 ; perimeter
G1 X103.834 Y107.442 E0.03434 ; perimeter
G1 X103.479 Y107.439 E0.01643 ; perimeter
G1 X103.091 Y107.200 E0.02110 ; perimeter
G1 X102.859 Y106.980 E0.01481 ; perimeter
G1 X101.604 Y106.017 E0.07328 ; perimeter
G1 X101.265 Y105.722 E0.02080 ; perimeter
G1 X101.059 Y105.413 E0.01721 ; perimeter
G1 X101.026 Y105.227 E0.00875 ; perimeter
G1 X100.902 Y104.935 E0.01469 ; perimeter
G1 X100.851 Y104.748 E0.00899 ; perimeter
G1 X100.853 Y104.458 E0.01343 ; perimeter
G1 X100.812 Y104.269 E0.00895 ; perimeter
G1 X100.843 Y104.106 E0.00768 ; perimeter
G1 X101.062 Y103.706 F10800.000 ; move inwards before travel
G1 X101.094 Y104.495 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.280003
G1 F2400.000
G1 X101.243 Y104.817 E0.00699 ; infill
;WIDTH:0.315001
G1 X101.326 Y104.970 E0.00395 ; infill
;WIDTH:0.322198
G1 X101.396 Y105.134 E0.00413 ; infill
;WIDTH:0.353192
G1 X101.433 Y105.256 E0.00330 ; infill
;WIDTH:0.360752
G1 X101.452 Y105.293 E0.00111 ; infill
;WIDTH:0.374154
G1 X101.685 Y105.566 E0.00988 ; infill
;WIDTH:0.280503
G1 X101.844 Y105.724 E0.00442 ; infill
G1 X102.835 Y106.507 E0.02495 ; infill
;WIDTH:0.292332
G1 X103.102 Y106.706 E0.00690 ; infill
;WIDTH:0.332589
G1 X103.326 Y106.887 E0.00695 ; infill
G1 X103.605 Y107.023 E0.00746 ; infill
G1 X103.800 Y107.056 E0.00476 ; infill
G1 X104.016 Y107.058 E0.00521 ; infill
;WIDTH:0.228642
G1 X104.739 Y107.087 E0.01117 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.016 Y107.058 E-0.19081 ; wipe and retract
;WIPE_END
G1 E-2.20919 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X100.322 Y103.231 ; move to first infill point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.249502
G1 F2400.000
G1 X99.987 Y102.811 E0.00924 ; infill
;WIDTH:0.370316
G1 X99.902 Y102.732 E0.00315 ; infill
G1 X99.689 Y102.446 E0.00971 ; infill
G1 X99.500 Y102.099 E0.01075 ; infill
;WIDTH:0.358665
G1 X99.397 Y101.901 E0.00586 ; infill
;WIDTH:0.329873
G1 X99.358 Y101.822 E0.00212 ; infill
;WIDTH:0.314393
G1 X99.050 Y100.962 E0.02061 ; infill
G1 X98.950 Y100.517 E0.01030 ; infill
G1 X98.932 Y100.350 E0.00378 ; infill
G1 X98.920 Y100.326 E0.00060 ; infill
G1 X98.857 Y100.297 E0.00157 ; infill
;WIDTH:0.265032
G1 X98.794 Y100.267 E0.00129 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.857 Y100.297 E-0.01838 ; wipe and retract
;WIPE_END
G1 E-2.38162 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X104.366 Y94.669 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.133 Y94.842 E0.01346 ; perimeter
G1 X103.941 Y94.916 E0.00952 ; perimeter
G1 X102.753 Y94.939 E0.05504 ; perimeter
G1 X102.570 Y94.888 E0.00882 ; perimeter
G1 X102.409 Y94.886 E0.00742 ; perimeter
G1 X102.255 Y94.853 E0.00730 ; perimeter
G1 X102.175 Y94.824 E0.00394 ; perimeter
G1 X102.030 Y94.710 E0.00857 ; perimeter
G1 X101.934 Y94.716 E0.00443 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.810 Y94.724 E0.00521 ; perimeter (bridge)
G1 X101.921 Y94.634 E0.00596 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.141 Y94.456 E0.01313 ; perimeter
G1 X102.741 Y94.182 E0.03054 ; perimeter
G1 X103.254 Y94.110 E0.02399 ; perimeter
G1 X103.978 Y94.099 E0.03354 ; perimeter
G1 X104.210 Y94.157 E0.01109 ; perimeter
G1 X104.373 Y94.282 E0.00953 ; perimeter
G1 X104.406 Y94.344 E0.00323 ; perimeter
G1 X104.433 Y94.504 E0.00753 ; perimeter
G1 X104.388 Y94.614 E0.00546 ; perimeter
G1 X104.078 Y94.629 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.133 Y94.842 E-0.09053 ; wipe and retract
G1 X103.941 Y94.916 E-0.05421 ; wipe and retract
G1 X102.753 Y94.939 E-0.31355 ; wipe and retract
G1 X102.570 Y94.888 E-0.05026 ; wipe and retract
G1 X102.409 Y94.886 E-0.04228 ; wipe and retract
G1 X102.255 Y94.853 E-0.04160 ; wipe and retract
G1 X102.175 Y94.824 E-0.02245 ; wipe and retract
G1 X102.030 Y94.710 E-0.04883 ; wipe and retract
G1 X101.934 Y94.716 E-0.02526 ; wipe and retract
;WIPE_END
G1 E-1.71102 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X99.014 Y97.086 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.763 Y97.039 E0.01186 ; perimeter
G1 X98.604 Y96.922 E0.00915 ; perimeter
G1 X98.552 Y96.788 E0.00664 ; perimeter
G1 X98.517 Y96.611 E0.00836 ; perimeter
G1 X98.568 Y96.404 E0.00987 ; perimeter
G1 X98.625 Y96.304 E0.00538 ; perimeter
G1 X98.772 Y96.154 E0.00970 ; perimeter
G1 X98.885 Y96.082 E0.00623 ; perimeter
G1 X98.980 Y95.981 E0.00639 ; perimeter
G1 X99.078 Y95.921 E0.00536 ; perimeter
G1 X99.291 Y95.730 E0.01322 ; perimeter
G1 X99.493 Y95.394 E0.01818 ; perimeter
G1 X99.669 Y94.968 E0.02135 ; perimeter
G1 X99.872 Y94.717 E0.01494 ; perimeter
G1 X99.942 Y94.660 E0.00420 ; perimeter
G1 X100.106 Y94.592 E0.00822 ; perimeter
G1 X100.351 Y94.529 E0.01172 ; perimeter
G1 X100.734 Y94.595 E0.01799 ; perimeter
G1 X100.955 Y94.742 E0.01227 ; perimeter
G1 X101.140 Y94.769 E0.00869 ; perimeter
G1 X101.070 Y94.805 E0.00370 ; perimeter
G1 X101.033 Y94.946 E0.00672 ; perimeter
G1 X100.997 Y94.983 E0.00239 ; perimeter
G1 X100.678 Y95.225 E0.01852 ; perimeter
G1 X100.048 Y95.585 E0.03362 ; perimeter
G1 X99.726 Y95.903 E0.02095 ; perimeter
G1 X99.608 Y96.056 E0.00898 ; perimeter
G1 X99.441 Y96.432 E0.01907 ; perimeter
G1 X99.348 Y96.751 E0.01536 ; perimeter
G1 X99.296 Y96.828 E0.00430 ; perimeter
G1 X99.070 Y97.064 E0.01514 ; perimeter
G1 X98.857 Y96.884 F10800.000 ; move inwards before travel
G1 X98.820 Y96.782 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.229988
G1 F2400.000
G1 X99.305 Y96.045 E0.01374 ; infill
G1 X99.325 Y96.059 F10800.000 ; move to first infill point
;WIDTH:0.138312
G1 F2400.000
G1 X98.788 Y96.730 E0.00682 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.325 Y96.059 E-0.22690 ; wipe and retract
;WIPE_END
G1 E-2.17310 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X99.955 Y94.997 ; move to first infill point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.32515
G1 F2400.000
G1 X100.724 Y94.878 E0.01826 ; infill
G1 X100.647 Y94.827 F10800.000 ; move to first infill point
;WIDTH:0.401896
G1 F2400.000
G1 X100.168 Y95.027 E0.01548 ; infill
G1 X99.966 Y95.199 E0.00794 ; infill
;WIDTH:0.371899
G1 X99.763 Y95.372 E0.00728 ; infill
G1 X99.698 Y95.540 F10800.000 ; move to first infill point
;WIDTH:0.194718
G1 F2400.000
G1 X100.271 Y94.798 E0.01183 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.698 Y95.540 E-0.24737 ; wipe and retract
;WIPE_END
G1 E-2.15263 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X102.445 Y94.645 ; move to first infill point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.327094
G1 F2400.000
G1 X102.849 Y94.554 E0.00979 ; infill
;WIDTH:0.351958
G1 X104.183 Y94.480 E0.03431 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.849 Y94.554 E-0.35238 ; wipe and retract
;WIPE_END
G1 E-2.04762 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X110.616 Y97.334 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.900 Y97.473 E0.01068 ; perimeter
G1 X110.979 Y97.550 E0.00374 ; perimeter
G1 X111.052 Y97.698 E0.00560 ; perimeter
G1 X111.246 Y98.522 E0.02864 ; perimeter
G1 X111.059 Y98.394 E0.00767 ; perimeter
G1 X111.007 Y98.134 E0.00898 ; perimeter
G1 X111.008 Y97.852 E0.00954 ; perimeter
G1 X110.657 Y97.376 E0.02001 ; perimeter
G1 X110.317 Y97.727 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.807 Y97.490 E0.02601 ; perimeter
G1 X109.447 Y97.293 E0.01906 ; perimeter
G1 X109.200 Y97.095 E0.01464 ; perimeter
G1 X108.907 Y96.943 E0.01527 ; perimeter
G1 X108.472 Y96.824 E0.02092 ; perimeter
G1 X107.814 Y96.713 E0.03091 ; perimeter
G1 X107.575 Y96.640 E0.01159 ; perimeter
G1 X107.201 Y96.431 E0.01984 ; perimeter
G1 X107.126 Y96.317 E0.00631 ; perimeter
G1 X107.111 Y96.196 E0.00564 ; perimeter
G1 X107.190 Y95.881 E0.01506 ; perimeter
G1 X107.338 Y95.726 E0.00992 ; perimeter
G1 X107.590 Y95.709 E0.01170 ; perimeter
G1 X107.811 Y95.781 E0.01081 ; perimeter
G1 X108.549 Y96.184 E0.03896 ; perimeter
G1 X108.657 Y96.223 E0.00530 ; perimeter
G1 X108.890 Y96.397 E0.01346 ; perimeter
G1 X109.242 Y96.607 E0.01899 ; perimeter
G1 X109.939 Y96.656 E0.03237 ; perimeter
G1 X110.379 Y96.739 E0.02076 ; perimeter
G1 X110.865 Y96.911 E0.02385 ; perimeter
G1 X111.173 Y97.072 E0.01611 ; perimeter
G1 X111.386 Y97.285 E0.01395 ; perimeter
G1 X111.509 Y97.535 E0.01293 ; perimeter
G1 X111.731 Y98.480 E0.04495 ; perimeter
G1 X111.807 Y98.686 E0.01017 ; perimeter
G1 X111.834 Y98.895 E0.00977 ; perimeter
G1 X111.770 Y98.972 E0.00461 ; perimeter
G1 X111.780 Y99.127 E0.00717 ; perimeter
G1 X111.480 Y99.092 E0.01400 ; perimeter
G1 X111.412 Y99.046 E0.00383 ; perimeter
G1 X111.164 Y99.001 E0.01163 ; perimeter
G1 X110.989 Y98.948 E0.00848 ; perimeter
G1 X110.865 Y98.836 E0.00775 ; perimeter
G1 X110.680 Y98.742 E0.00963 ; perimeter
G1 X110.641 Y98.700 E0.00263 ; perimeter
G1 X110.611 Y98.612 E0.00432 ; perimeter
G1 X110.524 Y98.180 E0.02038 ; perimeter
G1 X110.525 Y98.009 E0.00792 ; perimeter
G1 X110.352 Y97.775 E0.01349 ; perimeter
G1 X110.375 Y97.331 F10800.000 ; move inwards before travel
G1 X110.397 Y97.233 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.471254
G1 F2400.000
G1 X110.002 Y97.106 E0.01480 ; infill
;WIDTH:0.421739
G1 X109.342 Y96.870 E0.02206 ; infill
G1 X108.763 Y96.631 F10800.000 ; move to first infill point
;WIDTH:0.137728
G1 F2400.000
G1 X108.505 Y96.506 E0.00226 ; infill
G1 X108.409 Y96.481 E0.00078 ; infill
;WIDTH:0.259781
G1 X108.034 Y96.351 E0.00715 ; infill
;WIDTH:0.391391
G1 X107.561 Y96.146 E0.01493 ; infill
G1 X107.510 Y96.052 E0.00309 ; infill
;WIDTH:0.380018
G1 X107.458 Y95.959 E0.00299 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.510 Y96.052 E-0.02818 ; wipe and retract
;WIPE_END
G1 E-2.37182 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X113.433 Y101.948 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.354 Y102.002 E0.00441 ; perimeter
G1 X113.229 Y102.004 E0.00579 ; perimeter
G1 X113.041 Y101.919 E0.00957 ; perimeter
G1 X112.903 Y101.787 E0.00886 ; perimeter
G1 X112.799 Y101.578 E0.01081 ; perimeter
G1 X112.656 Y101.098 E0.02319 ; perimeter
G1 X112.564 Y100.486 E0.02866 ; perimeter
G1 X112.498 Y100.243 E0.01166 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.463 Y100.046 E0.00838 ; perimeter (bridge)
G1 X112.477 Y100.017 E0.00131 ; perimeter (bridge)
G1 X112.650 Y100.106 E0.00812 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.225 Y100.633 E0.03612 ; perimeter
G1 X113.407 Y100.882 E0.01430 ; perimeter
G1 X113.533 Y101.249 E0.01797 ; perimeter
G1 X113.555 Y101.594 E0.01605 ; perimeter
G1 X113.519 Y101.790 E0.00919 ; perimeter
G1 X113.461 Y101.895 E0.00558 ; perimeter
G1 X113.340 Y101.926 F10800.000 ; move inwards before travel
G1 X113.269 Y101.744 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.168353
G1 F2400.000
G1 X113.086 Y101.396 E0.00410 ; infill
;WIDTH:0.195583
G1 X112.904 Y101.048 E0.00499 ; infill
G1 X112.858 Y100.842 F10800.000 ; move to first infill point
;WIDTH:0.275025
G1 F2400.000
G1 X113.272 Y101.739 E0.01906 ; infill
G1 X113.212 Y101.732 F10800.000 ; move to first infill point
;WIDTH:0.35622
G1 F2400.000
G1 X113.139 Y101.327 E0.01072 ; infill
G1 X113.056 Y101.066 E0.00715 ; infill
;WIDTH:0.345297
G1 X112.914 Y100.673 E0.01049 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.056 Y101.066 E-0.11010 ; wipe and retract
;WIPE_END
G1 E-2.28990 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X115.278 Y104.936 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.393 Y104.887 E0.00581 ; perimeter
G1 X115.595 Y104.896 E0.00937 ; perimeter
G1 X115.758 Y104.953 E0.00799 ; perimeter
G1 X115.829 Y105.021 E0.00455 ; perimeter
G1 X115.864 Y105.079 E0.00316 ; perimeter
G1 X115.894 Y105.297 E0.01017 ; perimeter
G1 X115.862 Y105.465 E0.00796 ; perimeter
G1 X115.821 Y105.539 E0.00388 ; perimeter
G1 X115.691 Y105.639 E0.00763 ; perimeter
G1 X115.529 Y105.686 E0.00780 ; perimeter
G1 X115.405 Y105.675 E0.00575 ; perimeter
G1 X115.290 Y105.620 E0.00589 ; perimeter
G1 X115.170 Y105.456 E0.00943 ; perimeter
G1 X115.136 Y105.310 E0.00696 ; perimeter
G1 X115.167 Y105.081 E0.01069 ; perimeter
G1 X115.233 Y104.977 E0.00574 ; perimeter
G1 X115.395 Y104.982 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.393 Y104.887 E-0.04838 ; wipe and retract
G1 X115.595 Y104.896 E-0.05339 ; wipe and retract
G1 X115.758 Y104.953 E-0.04554 ; wipe and retract
G1 X115.829 Y105.021 E-0.02593 ; wipe and retract
G1 X115.864 Y105.079 E-0.01802 ; wipe and retract
G1 X115.894 Y105.297 E-0.05791 ; wipe and retract
G1 X115.862 Y105.465 E-0.04532 ; wipe and retract
G1 X115.821 Y105.539 E-0.02210 ; wipe and retract
G1 X115.691 Y105.639 E-0.04347 ; wipe and retract
G1 X115.529 Y105.686 E-0.04441 ; wipe and retract
G1 X115.405 Y105.675 E-0.03278 ; wipe and retract
G1 X115.290 Y105.620 E-0.03358 ; wipe and retract
G1 X115.170 Y105.456 E-0.05371 ; wipe and retract
G1 X115.136 Y105.310 E-0.03967 ; wipe and retract
G1 X115.167 Y105.081 E-0.06088 ; wipe and retract
G1 X115.233 Y104.977 E-0.03269 ; wipe and retract
;WIPE_END
G1 E-1.74221 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X115.535 Y112.138 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.609 Y112.148 E0.00347 ; perimeter
G1 X115.792 Y112.240 E0.00947 ; perimeter
G1 X115.858 Y112.300 E0.00414 ; perimeter
G1 X115.891 Y112.401 E0.00496 ; perimeter
G1 X115.888 Y113.181 E0.03614 ; perimeter
G1 X115.831 Y113.518 E0.01582 ; perimeter
G1 X115.787 Y114.043 E0.02440 ; perimeter
G1 X115.845 Y114.837 E0.03688 ; perimeter
G1 X115.802 Y115.047 E0.00995 ; perimeter
G1 X115.756 Y115.136 E0.00463 ; perimeter
G1 X115.330 Y115.548 E0.02745 ; perimeter
G1 X115.111 Y115.812 E0.01591 ; perimeter
G1 X114.965 Y115.929 E0.00865 ; perimeter
G1 X114.764 Y116.000 E0.00989 ; perimeter
G1 X114.612 Y115.954 E0.00732 ; perimeter
G1 X114.498 Y115.885 E0.00619 ; perimeter
G1 X114.443 Y115.819 E0.00396 ; perimeter
G1 X114.394 Y115.699 E0.00602 ; perimeter
G1 X114.380 Y115.543 E0.00727 ; perimeter
G1 X114.396 Y115.446 E0.00452 ; perimeter
G1 X114.462 Y115.305 E0.00721 ; perimeter
G1 X114.907 Y114.847 E0.02958 ; perimeter
G1 X115.050 Y114.602 E0.01314 ; perimeter
G1 X115.151 Y114.118 E0.02290 ; perimeter
G1 X115.185 Y113.623 E0.02298 ; perimeter
G1 X115.144 Y113.367 E0.01201 ; perimeter
G1 X115.119 Y112.917 E0.02089 ; perimeter
G1 X115.136 Y112.447 E0.02179 ; perimeter
G1 X115.178 Y112.318 E0.00625 ; perimeter
G1 X115.340 Y112.181 E0.00986 ; perimeter
G1 X115.476 Y112.151 E0.00645 ; perimeter
G1 X115.577 Y112.200 F10800.000 ; move inwards before travel
G1 X115.510 Y112.535 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316935
G1 F2400.000
G1 X115.500 Y113.328 E0.01807 ; infill
;WIDTH:0.190967
G1 X115.504 Y113.617 E0.00356 ; infill
G1 X115.471 Y114.047 E0.00531 ; infill
;WIDTH:0.208978
G1 X115.471 Y114.168 E0.00167 ; infill
;WIDTH:0.247641
G1 X115.462 Y114.307 E0.00236 ; infill
;WIDTH:0.286305
G1 X115.453 Y114.445 E0.00281 ; infill
;WIDTH:0.32497
G1 X115.444 Y114.584 E0.00326 ; infill
;WIDTH:0.363635
G1 X115.435 Y114.722 E0.00370 ; infill
;WIDTH:0.387744
G1 X115.426 Y114.777 E0.00157 ; infill
;WIDTH:0.407612
G1 X115.419 Y114.809 E0.00102 ; infill
;WIDTH:0.433085
G1 X115.391 Y114.883 E0.00256 ; infill
G1 X115.315 Y114.979 E0.00397 ; infill
;WIDTH:0.32011
G1 X114.801 Y115.540 E0.01754 ; infill
G1 X114.765 Y115.605 E0.00171 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.801 Y115.540 E-0.01952 ; wipe and retract
G1 X115.315 Y114.979 E-0.20085 ; wipe and retract
;WIPE_END
G1 E-2.17962 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X112.268 Y115.739 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.232 Y115.915 E0.00834 ; perimeter
G1 X112.138 Y116.041 E0.00729 ; perimeter
G1 X112.000 Y116.126 E0.00754 ; perimeter
G1 X111.882 Y116.156 E0.00561 ; perimeter
G1 X111.658 Y116.151 E0.01038 ; perimeter
G1 X111.471 Y116.082 E0.00922 ; perimeter
G1 X111.254 Y115.823 E0.01569 ; perimeter
G1 X111.211 Y115.586 E0.01113 ; perimeter
G1 X111.253 Y115.458 E0.00624 ; perimeter
G1 X111.356 Y115.446 E0.00483 ; perimeter
G1 X111.538 Y115.358 E0.00933 ; perimeter
G1 X111.795 Y115.332 E0.01197 ; perimeter
G1 X112.101 Y115.452 E0.01527 ; perimeter
G1 X112.196 Y115.531 E0.00569 ; perimeter
G1 X112.253 Y115.681 E0.00742 ; perimeter
G1 X112.116 Y115.835 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.232 Y115.915 E-0.06209 ; wipe and retract
G1 X112.138 Y116.041 E-0.04153 ; wipe and retract
G1 X112.000 Y116.126 E-0.04294 ; wipe and retract
G1 X111.882 Y116.156 E-0.03198 ; wipe and retract
G1 X111.658 Y116.151 E-0.05914 ; wipe and retract
G1 X111.471 Y116.082 E-0.05254 ; wipe and retract
G1 X111.254 Y115.823 E-0.08937 ; wipe and retract
G1 X111.211 Y115.586 E-0.06339 ; wipe and retract
G1 X111.253 Y115.458 E-0.03554 ; wipe and retract
G1 X111.356 Y115.446 E-0.02752 ; wipe and retract
G1 X111.538 Y115.358 E-0.05316 ; wipe and retract
G1 X111.795 Y115.332 E-0.06819 ; wipe and retract
G1 X112.101 Y115.452 E-0.08699 ; wipe and retract
G1 X112.196 Y115.531 E-0.03240 ; wipe and retract
G1 X112.253 Y115.681 E-0.04226 ; wipe and retract
;WIPE_END
G1 E-1.61097 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X109.678 Y112.735 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.781 Y112.853 E0.00724 ; perimeter
G1 X109.853 Y113.051 E0.00979 ; perimeter
G1 X109.844 Y113.219 E0.00776 ; perimeter
G1 X109.739 Y113.495 E0.01371 ; perimeter
G1 X109.564 Y113.689 E0.01209 ; perimeter
G1 X109.434 Y113.678 E0.00601 ; perimeter
G1 X109.329 Y113.703 E0.00501 ; perimeter
G1 X109.173 Y113.626 E0.00807 ; perimeter
G1 X109.021 Y113.418 E0.01193 ; perimeter
G1 X108.990 Y113.243 E0.00823 ; perimeter
G1 X109.017 Y113.071 E0.00805 ; perimeter
G1 X109.153 Y112.815 E0.01342 ; perimeter
G1 X109.351 Y112.683 E0.01102 ; perimeter
G1 X109.531 Y112.682 E0.00837 ; perimeter
G1 X109.627 Y112.704 E0.00454 ; perimeter
G1 X109.663 Y112.890 F10800.000 ; move inwards before travel
G1 X109.448 Y113.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.38083
G1 F2400.000
G1 X109.402 Y113.239 E0.00355 ; infill
;WIDTH:0.373164
G1 X109.400 Y113.256 E0.00047 ; infill
;WIDTH:0.364108
G1 X109.405 Y113.290 E0.00092 ; infill
;WIDTH:0.331139
G1 X109.405 Y113.291 E0.00003 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.405 Y113.290 E-0.00035 ; wipe and retract
;WIPE_END
G1 E-2.39965 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 X107.275 Y109.051 ; move to first perimeter point
G1 Z15.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.373 Y109.005 E0.00502 ; perimeter
G1 X107.464 Y108.990 E0.00428 ; perimeter
G1 X107.615 Y109.032 E0.00723 ; perimeter
G1 X107.728 Y109.109 E0.00636 ; perimeter
G1 X108.043 Y109.540 E0.02470 ; perimeter
G1 X108.193 Y110.011 E0.02293 ; perimeter
G1 X108.150 Y110.336 E0.01520 ; perimeter
G1 X108.187 Y110.464 E0.00614 ; perimeter
G1 X108.179 Y110.500 E0.00175 ; perimeter
G1 X108.109 Y110.464 E0.00366 ; perimeter
G1 X107.962 Y110.475 E0.00685 ; perimeter
G1 X107.735 Y110.331 E0.01245 ; perimeter
G1 X107.564 Y110.178 E0.01061 ; perimeter
G1 X107.409 Y109.984 E0.01148 ; perimeter
G1 X107.330 Y109.844 E0.00744 ; perimeter
G1 X107.220 Y109.528 E0.01551 ; perimeter
G1 X107.199 Y109.264 E0.01228 ; perimeter
G1 X107.253 Y109.106 E0.00772 ; perimeter
G1 X107.379 Y109.080 F10800.000 ; move inwards before travel
G1 X107.455 Y109.252 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.134337
G1 F2400.000
G1 X107.854 Y109.730 E0.00473 ; infill
G1 X107.932 Y110.147 F10800.000 ; move to first infill point
;WIDTH:0.284968
G1 F2400.000
G1 X107.562 Y109.456 E0.01578 ; infill
;WIDTH:0.253081
G1 X107.486 Y109.245 E0.00392 ; infill
;LAYER_CHANGE
;Z:15.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;15.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.562 Y109.456 E-0.05926 ; wipe and retract
;WIPE_END
G1 E-2.34074 F2400.000 ; retract
G1 Z15.275 F10800.000 ; lift Z
G1 Z15.400 ; move to next layer (76)
;AFTER_LAYER_CHANGE
;15.4
G1 Z15.475 ; lift Z
G1 X111.356 Y98.539 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.267 Y98.462 E0.00398 ; perimeter
G1 X111.095 Y97.833 E0.02207 ; perimeter
G1 X110.815 Y97.400 E0.01747 ; perimeter
G1 X110.992 Y97.486 E0.00665 ; perimeter
G1 X111.126 Y97.643 E0.00701 ; perimeter
G1 X111.338 Y98.482 E0.02927 ; perimeter
G1 X110.430 Y97.692 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.906 Y97.442 E0.02690 ; perimeter
G1 X109.557 Y97.326 E0.01703 ; perimeter
G1 X108.981 Y97.017 E0.03028 ; perimeter
G1 X108.472 Y96.910 E0.02407 ; perimeter
G1 X107.877 Y96.726 E0.02886 ; perimeter
G1 X107.522 Y96.552 E0.01833 ; perimeter
G1 X107.236 Y96.382 E0.01540 ; perimeter
G1 X107.106 Y96.212 E0.00990 ; perimeter
G1 X107.096 Y96.025 E0.00870 ; perimeter
G1 X107.143 Y95.766 E0.01216 ; perimeter
G1 X107.230 Y95.663 E0.00623 ; perimeter
G1 X107.387 Y95.604 E0.00779 ; perimeter
G1 X107.516 Y95.607 E0.00597 ; perimeter
G1 X107.767 Y95.705 E0.01251 ; perimeter
G1 X108.139 Y95.913 E0.01972 ; perimeter
G1 X109.101 Y96.366 E0.04928 ; perimeter
G1 X109.326 Y96.513 E0.01242 ; perimeter
G1 X109.558 Y96.529 E0.01078 ; perimeter
G1 X109.884 Y96.609 E0.01554 ; perimeter
G1 X110.045 Y96.679 E0.00816 ; perimeter
G1 X110.285 Y96.714 E0.01124 ; perimeter
G1 X110.512 Y96.779 E0.01090 ; perimeter
G1 X111.091 Y96.986 E0.02850 ; perimeter
G1 X111.304 Y97.110 E0.01144 ; perimeter
G1 X111.569 Y97.419 E0.01883 ; perimeter
G1 X111.743 Y98.162 E0.03535 ; perimeter
G1 X111.875 Y98.583 E0.02044 ; perimeter
G1 X111.974 Y98.803 E0.01115 ; perimeter
G1 X112.020 Y99.057 E0.01196 ; perimeter
G1 X112.340 Y99.517 E0.02596 ; perimeter
G1 X112.539 Y99.666 E0.01153 ; perimeter
G1 X113.360 Y100.675 E0.06026 ; perimeter
G1 X113.497 Y101.072 E0.01945 ; perimeter
G1 X113.463 Y101.530 E0.02129 ; perimeter
G1 X113.368 Y101.718 E0.00974 ; perimeter
G1 X113.306 Y101.768 E0.00370 ; perimeter
G1 X113.192 Y101.776 E0.00526 ; perimeter
G1 X113.033 Y101.716 E0.00790 ; perimeter
G1 X112.896 Y101.588 E0.00869 ; perimeter
G1 X112.755 Y101.384 E0.01145 ; perimeter
G1 X112.516 Y100.806 E0.02898 ; perimeter
G1 X112.469 Y100.611 E0.00931 ; perimeter
G1 X112.244 Y100.133 E0.02446 ; perimeter
G1 X111.852 Y99.432 E0.03722 ; perimeter
G1 X111.267 Y99.042 E0.03256 ; perimeter
G1 X111.172 Y99.018 E0.00455 ; perimeter
G1 X110.840 Y98.727 E0.02043 ; perimeter
G1 X110.650 Y98.032 E0.03339 ; perimeter
G1 X110.463 Y97.742 E0.01597 ; perimeter
G1 X110.498 Y97.298 F10800.000 ; move inwards before travel
G1 X110.601 Y97.282 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.427645
G1 F2400.000
G1 X110.198 Y97.121 E0.01388 ; infill
;WIDTH:0.391113
G1 X110.062 Y97.080 E0.00410 ; infill
;WIDTH:0.348815
G1 X109.958 Y97.054 E0.00274 ; infill
;WIDTH:0.328769
G1 X109.607 Y96.927 E0.00887 ; infill
;WIDTH:0.310486
G1 X109.502 Y96.887 E0.00249 ; infill
G1 X109.242 Y96.812 F10800.000 ; move to first infill point
;WIDTH:0.169017
G1 F2400.000
G1 X108.936 Y96.662 E0.00357 ; infill
;WIDTH:0.281871
G1 X108.301 Y96.435 E0.01340 ; infill
;WIDTH:0.406988
G1 X107.951 Y96.292 E0.01145 ; infill
G1 X107.521 Y96.061 E0.01476 ; infill
G1 X107.382 Y95.871 E0.00714 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.521 Y96.061 E-0.06225 ; wipe and retract
G1 X107.951 Y96.292 E-0.12871 ; wipe and retract
G1 X108.301 Y96.435 E-0.09979 ; wipe and retract
;WIPE_END
G1 E-2.10925 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X112.484 Y99.995 ; move to first infill point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.360075
G1 F2400.000
G1 X112.737 Y100.434 E0.01337 ; infill
;WIDTH:0.388033
G1 X112.991 Y100.873 E0.01455 ; infill
G1 X113.220 Y101.477 E0.01854 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.991 Y100.873 E-0.17048 ; wipe and retract
G1 X112.737 Y100.434 E-0.13383 ; wipe and retract
;WIPE_END
G1 E-2.09569 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X99.056 Y97.167 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.911 Y97.137 E0.00686 ; perimeter
G1 X98.695 Y96.992 E0.01203 ; perimeter
G1 X98.626 Y96.905 E0.00515 ; perimeter
G1 X98.548 Y96.615 E0.01389 ; perimeter
G1 X98.580 Y96.418 E0.00927 ; perimeter
G1 X98.768 Y96.124 E0.01617 ; perimeter
G1 X99.068 Y95.817 E0.01987 ; perimeter
G1 X99.377 Y95.400 E0.02403 ; perimeter
G1 X99.506 Y95.164 E0.01247 ; perimeter
G1 X99.745 Y94.864 E0.01778 ; perimeter
G1 X99.807 Y94.789 E0.00451 ; perimeter
G1 X100.006 Y94.628 E0.01187 ; perimeter
G1 X100.501 Y94.495 E0.02374 ; perimeter
G1 X100.719 Y94.500 E0.01010 ; perimeter
G1 X100.893 Y94.538 E0.00824 ; perimeter
G1 X101.085 Y94.524 E0.00891 ; perimeter
G1 X101.489 Y94.574 E0.01889 ; perimeter
G1 X101.768 Y94.440 E0.01433 ; perimeter
G1 X102.201 Y94.320 E0.02078 ; perimeter
G1 X102.368 Y94.243 E0.00853 ; perimeter
G1 X102.653 Y94.177 E0.01357 ; perimeter
G1 X103.406 Y94.104 E0.03505 ; perimeter
G1 X104.143 Y94.091 E0.03411 ; perimeter
G1 X104.393 Y94.155 E0.01195 ; perimeter
G1 X104.599 Y94.318 E0.01219 ; perimeter
G1 X104.645 Y94.519 E0.00956 ; perimeter
G1 X104.581 Y94.673 E0.00773 ; perimeter
G1 X104.375 Y94.820 E0.01169 ; perimeter
G1 X104.160 Y94.902 E0.01068 ; perimeter
G1 X103.521 Y94.918 E0.02959 ; perimeter
G1 X103.262 Y94.872 E0.01219 ; perimeter
G1 X103.020 Y94.930 E0.01153 ; perimeter
G1 X102.670 Y94.949 E0.01625 ; perimeter
G1 X102.160 Y94.941 E0.02363 ; perimeter
G1 X101.995 Y94.906 E0.00781 ; perimeter
G1 X101.282 Y94.953 E0.03311 ; perimeter
G1 X100.987 Y95.171 E0.01696 ; perimeter
G1 X100.505 Y95.366 E0.02411 ; perimeter
G1 X100.273 Y95.499 E0.01239 ; perimeter
G1 X99.903 Y95.864 E0.02404 ; perimeter
G1 X99.665 Y96.171 E0.01804 ; perimeter
G1 X99.393 Y96.738 E0.02910 ; perimeter
G1 X99.180 Y97.081 E0.01873 ; perimeter
G1 X99.101 Y97.127 E0.00423 ; perimeter
G1 X98.961 Y97.052 F10800.000 ; move inwards before travel
G1 X98.898 Y96.831 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.354188
G1 F2400.000
G1 X98.985 Y96.582 E0.00681 ; infill
G1 X99.253 Y96.163 E0.01289 ; infill
;WIDTH:0.25313
G1 X99.376 Y95.980 E0.00384 ; infill
;WIDTH:0.261
G1 X99.646 Y95.626 E0.00808 ; infill
;WIDTH:0.27024
G1 X99.680 Y95.585 E0.00101 ; infill
;WIDTH:0.307459
G1 X99.757 Y95.483 E0.00280 ; infill
;WIDTH:0.344677
G1 X99.834 Y95.382 E0.00320 ; infill
;WIDTH:0.375921
G1 X100.009 Y95.187 E0.00724 ; infill
;WIDTH:0.386796
G1 X100.040 Y95.156 E0.00125 ; infill
;WIDTH:0.40287
G1 X100.072 Y95.129 E0.00128 ; infill
;WIDTH:0.411508
G1 X100.220 Y95.021 E0.00560 ; infill
G1 X100.306 Y94.986 E0.00283 ; infill
G1 X100.948 Y94.775 E0.02073 ; infill
G1 X102.015 Y94.636 F10800.000 ; move to first infill point
;WIDTH:0.312041
G1 F2400.000
G1 X103.279 Y94.494 E0.02845 ; infill
;WIDTH:0.353201
G1 X103.429 Y94.500 E0.00388 ; infill
;WIDTH:0.372215
G1 X104.080 Y94.498 E0.01782 ; infill
G1 X104.368 Y94.442 E0.00803 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.080 Y94.498 E-0.07739 ; wipe and retract
G1 X103.429 Y94.500 E-0.17175 ; wipe and retract
;WIPE_END
G1 E-2.15087 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X99.033 Y99.890 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.198 Y100.005 E0.00934 ; perimeter
G1 X99.277 Y100.110 E0.00607 ; perimeter
G1 X99.365 Y100.473 E0.01733 ; perimeter
G1 X99.440 Y101.108 E0.02960 ; perimeter
G1 X99.693 Y101.652 E0.02776 ; perimeter
G1 X99.883 Y102.002 E0.01847 ; perimeter
G1 X100.272 Y102.600 E0.03306 ; perimeter
G1 X100.313 Y102.852 E0.01182 ; perimeter
G1 X100.412 Y103.023 E0.00914 ; perimeter
G1 X100.368 Y103.199 E0.00841 ; perimeter
G1 X100.306 Y103.265 E0.00420 ; perimeter
G1 X100.049 Y103.166 E0.01277 ; perimeter
G1 X99.935 Y103.166 E0.00525 ; perimeter
G1 X99.758 Y103.094 E0.00888 ; perimeter
G1 X99.496 Y102.912 E0.01477 ; perimeter
G1 X99.291 Y102.657 E0.01514 ; perimeter
G1 X99.129 Y102.292 E0.01849 ; perimeter
G1 X98.941 Y101.765 E0.02596 ; perimeter
G1 X98.853 Y101.421 E0.01642 ; perimeter
G1 X98.597 Y100.798 E0.03120 ; perimeter
G1 X98.558 Y100.634 E0.00783 ; perimeter
G1 X98.541 Y100.256 E0.01750 ; perimeter
G1 X98.602 Y100.076 E0.00879 ; perimeter
G1 X98.764 Y99.915 E0.01059 ; perimeter
G1 X98.974 Y99.879 E0.00987 ; perimeter
G1 X99.084 Y100.085 F10800.000 ; move inwards before travel
G1 X98.932 Y100.276 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314591
G1 F2400.000
G1 X98.931 Y100.281 E0.00011 ; infill
;WIDTH:0.33159
G1 X98.929 Y100.311 E0.00073 ; infill
;WIDTH:0.368266
G1 X98.982 Y100.675 E0.00993 ; infill
G1 X99.026 Y100.845 E0.00476 ; infill
;WIDTH:0.227956
G1 X99.115 Y101.185 E0.00541 ; infill
G1 X99.172 Y101.322 E0.00228 ; infill
;WIDTH:0.260728
G1 X99.232 Y101.490 E0.00322 ; infill
;WIDTH:0.293498
G1 X99.291 Y101.657 E0.00371 ; infill
;WIDTH:0.310233
G1 X99.360 Y101.823 E0.00400 ; infill
;WIDTH:0.336967
G1 X99.431 Y101.983 E0.00428 ; infill
;WIDTH:0.370571
G1 X99.538 Y102.215 E0.00695 ; infill
;WIDTH:0.410376
G1 X99.657 Y102.434 E0.00763 ; infill
G1 X99.781 Y102.606 E0.00647 ; infill
;WIDTH:0.317197
G1 X99.912 Y102.740 E0.00427 ; infill
G1 X100.029 Y102.925 E0.00500 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.912 Y102.740 E-0.05784 ; wipe and retract
G1 X99.781 Y102.606 E-0.04941 ; wipe and retract
;WIPE_END
G1 E-2.29275 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X103.451 Y107.023 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.474 Y107.032 E0.00084 ; perimeter
G1 X104.692 Y106.938 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.752 Y107.010 E0.00433 ; perimeter
G1 X104.738 Y107.148 E0.00647 ; perimeter
G1 X104.611 Y107.253 E0.00760 ; perimeter
G1 X104.444 Y107.333 E0.00857 ; perimeter
G1 X104.273 Y107.357 E0.00800 ; perimeter
G1 X104.069 Y107.417 E0.00988 ; perimeter
G1 X103.766 Y107.454 E0.01410 ; perimeter
G1 X103.666 Y107.507 E0.00527 ; perimeter
G1 X103.395 Y107.531 E0.01259 ; perimeter
G1 X103.333 Y107.519 E0.00294 ; perimeter
G1 X103.095 Y107.367 E0.01306 ; perimeter
G1 X102.546 Y106.799 E0.03659 ; perimeter
G1 X101.259 Y105.801 E0.07544 ; perimeter
G1 X101.112 Y105.593 E0.01181 ; perimeter
G1 X101.037 Y105.437 E0.00802 ; perimeter
G1 X100.965 Y105.074 E0.01714 ; perimeter
G1 X100.966 Y104.584 E0.02269 ; perimeter
G1 X101.025 Y104.496 E0.00490 ; perimeter
G1 X101.041 Y104.410 E0.00405 ; perimeter
G1 X101.161 Y104.416 E0.00555 ; perimeter
G1 X101.276 Y104.460 E0.00571 ; perimeter
G1 X101.414 Y104.620 E0.00977 ; perimeter
G1 X101.577 Y104.757 E0.00987 ; perimeter
G1 X101.786 Y105.054 E0.01683 ; perimeter
G1 X102.031 Y105.336 E0.01730 ; perimeter
G1 X102.476 Y105.732 E0.02761 ; perimeter
G1 X103.482 Y106.512 E0.05895 ; perimeter
G1 X103.944 Y106.709 E0.02326 ; perimeter
G1 X104.213 Y106.735 E0.01252 ; perimeter
G1 X104.494 Y106.822 E0.01364 ; perimeter
G1 X104.640 Y106.908 E0.00785 ; perimeter
G1 X104.675 Y107.030 F10800.000 ; move inwards before travel
G1 X104.443 Y107.066 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.178582
G1 F2400.000
G1 X103.734 Y107.035 E0.00801 ; infill
G1 X103.754 Y106.905 F10800.000 ; move to first infill point
;WIDTH:0.23927
G1 F2400.000
G1 X103.858 Y107.071 E0.00319 ; infill
G1 X104.366 Y107.035 E0.00831 ; infill
G1 X103.248 Y106.890 F10800.000 ; move to first infill point
;WIDTH:0.417174
G1 F2400.000
G1 X103.036 Y106.699 E0.00890 ; infill
;WIDTH:0.389995
G1 X102.823 Y106.508 E0.00825 ; infill
;WIDTH:0.362814
G1 X102.217 Y106.037 E0.02042 ; infill
G1 X101.581 Y105.492 E0.02226 ; infill
G1 X101.456 Y105.324 E0.00558 ; infill
G1 X101.206 Y104.899 E0.01310 ; infill
G1 X101.254 Y104.801 F10800.000 ; move to first infill point
;WIDTH:0.28945
G1 F2400.000
G1 X101.543 Y105.716 E0.01969 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.254 Y104.801 E-0.25344 ; wipe and retract
;WIPE_END
G1 E-2.14656 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X107.321 Y109.361 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.381 Y109.259 E0.00550 ; perimeter
G1 X107.540 Y109.203 E0.00780 ; perimeter
G1 X107.804 Y109.290 E0.01288 ; perimeter
G1 X108.086 Y109.634 E0.02061 ; perimeter
G1 X108.228 Y109.873 E0.01290 ; perimeter
G1 X108.325 Y110.179 E0.01486 ; perimeter
G1 X108.495 Y110.575 E0.01993 ; perimeter
G1 X108.592 Y110.872 E0.01449 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.668 Y111.101 E0.01009 ; perimeter (bridge)
G1 X108.663 Y111.185 E0.00351 ; perimeter (bridge)
G1 X108.621 Y111.172 E0.00183 ; perimeter (bridge)
G1 X108.393 Y111.005 E0.01180 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.725 Y110.461 E0.03988 ; perimeter
G1 X107.587 Y110.298 E0.00993 ; perimeter
G1 X107.427 Y110.062 E0.01323 ; perimeter
G1 X107.367 Y109.919 E0.00717 ; perimeter
G1 X107.316 Y109.715 E0.00971 ; perimeter
G1 X107.297 Y109.482 E0.01087 ; perimeter
G1 X107.309 Y109.420 E0.00290 ; perimeter
G1 X107.438 Y109.341 F10800.000 ; move inwards before travel
G1 X108.070 Y110.436 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333075
G1 F2400.000
G1 X107.873 Y110.032 E0.01084 ; infill
G1 X107.541 Y109.488 E0.01537 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.873 Y110.032 E-0.16815 ; wipe and retract
G1 X108.070 Y110.436 E-0.11860 ; wipe and retract
;WIPE_END
G1 E-2.11325 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X109.298 Y113.558 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.195 Y113.498 E0.00550 ; perimeter
G1 X109.065 Y113.315 E0.01041 ; perimeter
G1 X109.032 Y113.148 E0.00788 ; perimeter
G1 X109.068 Y112.924 E0.01052 ; perimeter
G1 X109.150 Y112.752 E0.00883 ; perimeter
G1 X109.189 Y112.615 E0.00657 ; perimeter
G1 X109.386 Y112.468 E0.01140 ; perimeter
G1 X109.450 Y112.462 E0.00295 ; perimeter
G1 X109.544 Y112.493 E0.00459 ; perimeter
G1 X109.610 Y112.563 E0.00445 ; perimeter
G1 X109.750 Y112.646 E0.00755 ; perimeter
G1 X109.834 Y112.757 E0.00643 ; perimeter
G1 X109.879 Y112.876 E0.00589 ; perimeter
G1 X109.894 Y113.017 E0.00656 ; perimeter
G1 X109.843 Y113.220 E0.00974 ; perimeter
G1 X109.757 Y113.379 E0.00832 ; perimeter
G1 X109.583 Y113.538 E0.01095 ; perimeter
G1 X109.470 Y113.565 E0.00538 ; perimeter
G1 X109.357 Y113.561 E0.00522 ; perimeter
G1 X109.275 Y113.442 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.195 Y113.498 E-0.04587 ; wipe and retract
G1 X109.065 Y113.315 E-0.05932 ; wipe and retract
G1 X109.032 Y113.148 E-0.04490 ; wipe and retract
G1 X109.068 Y112.924 E-0.05992 ; wipe and retract
G1 X109.150 Y112.752 E-0.05031 ; wipe and retract
G1 X109.189 Y112.615 E-0.03740 ; wipe and retract
G1 X109.386 Y112.468 E-0.06496 ; wipe and retract
G1 X109.450 Y112.462 E-0.01678 ; wipe and retract
G1 X109.544 Y112.493 E-0.02613 ; wipe and retract
G1 X109.610 Y112.563 E-0.02537 ; wipe and retract
G1 X109.750 Y112.646 E-0.04298 ; wipe and retract
G1 X109.834 Y112.757 E-0.03664 ; wipe and retract
G1 X109.879 Y112.876 E-0.03353 ; wipe and retract
G1 X109.894 Y113.017 E-0.03739 ; wipe and retract
G1 X109.843 Y113.220 E-0.05548 ; wipe and retract
G1 X109.757 Y113.379 E-0.04739 ; wipe and retract
G1 X109.583 Y113.538 E-0.06237 ; wipe and retract
G1 X109.470 Y113.565 E-0.03062 ; wipe and retract
G1 X109.357 Y113.561 E-0.02975 ; wipe and retract
;WIPE_END
G1 E-1.59288 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X111.362 Y115.672 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.481 Y115.461 E0.01125 ; perimeter
G1 X111.704 Y115.368 E0.01116 ; perimeter
G1 X111.919 Y115.346 E0.01004 ; perimeter
G1 X112.199 Y115.453 E0.01388 ; perimeter
G1 X112.284 Y115.523 E0.00509 ; perimeter
G1 X112.344 Y115.631 E0.00575 ; perimeter
G1 X112.367 Y115.744 E0.00534 ; perimeter
G1 X112.324 Y115.926 E0.00865 ; perimeter
G1 X112.238 Y116.037 E0.00649 ; perimeter
G1 X112.100 Y116.124 E0.00754 ; perimeter
G1 X111.947 Y116.157 E0.00724 ; perimeter
G1 X111.750 Y116.151 E0.00913 ; perimeter
G1 X111.556 Y116.078 E0.00961 ; perimeter
G1 X111.428 Y115.921 E0.00937 ; perimeter
G1 X111.372 Y115.729 E0.00929 ; perimeter
G1 X111.592 Y115.594 F10800.000 ; move inwards before travel
G1 X112.023 Y115.743 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.26244
G1 F2400.000
G1 X111.986 Y115.762 E0.00077 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.023 Y115.743 E-0.01108 ; wipe and retract
;WIPE_END
G1 E-2.38892 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X114.405 Y115.431 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.465 Y115.309 E0.00630 ; perimeter
G1 X114.846 Y114.916 E0.02536 ; perimeter
G1 X115.037 Y114.597 E0.01722 ; perimeter
G1 X115.103 Y114.204 E0.01846 ; perimeter
G1 X115.120 Y113.698 E0.02347 ; perimeter
G1 X115.152 Y113.523 E0.00821 ; perimeter
G1 X115.118 Y112.951 E0.02655 ; perimeter
G1 X115.124 Y112.555 E0.01835 ; perimeter
G1 X115.172 Y112.308 E0.01166 ; perimeter
G1 X115.344 Y112.137 E0.01122 ; perimeter
G1 X115.464 Y112.103 E0.00580 ; perimeter
G1 X115.688 Y112.133 E0.01045 ; perimeter
G1 X115.760 Y112.177 E0.00391 ; perimeter
G1 X115.800 Y112.243 E0.00356 ; perimeter
G1 X115.872 Y112.303 E0.00436 ; perimeter
G1 X115.895 Y112.434 E0.00616 ; perimeter
G1 X115.869 Y113.937 E0.06964 ; perimeter
G1 X115.848 Y114.178 E0.01120 ; perimeter
G1 X115.851 Y114.784 E0.02807 ; perimeter
G1 X115.806 Y115.035 E0.01181 ; perimeter
G1 X115.756 Y115.137 E0.00524 ; perimeter
G1 X115.326 Y115.551 E0.02767 ; perimeter
G1 X115.113 Y115.816 E0.01574 ; perimeter
G1 X114.980 Y115.923 E0.00791 ; perimeter
G1 X114.879 Y115.972 E0.00522 ; perimeter
G1 X114.766 Y115.996 E0.00532 ; perimeter
G1 X114.617 Y115.951 E0.00722 ; perimeter
G1 X114.499 Y115.880 E0.00639 ; perimeter
G1 X114.448 Y115.819 E0.00370 ; perimeter
G1 X114.400 Y115.699 E0.00596 ; perimeter
G1 X114.396 Y115.490 E0.00967 ; perimeter
G1 X114.537 Y115.396 F10800.000 ; move inwards before travel
G1 X114.651 Y115.677 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.315954
G1 F2400.000
G1 X114.773 Y115.601 E0.00328 ; infill
G1 X114.802 Y115.545 E0.00144 ; infill
G1 X115.278 Y115.013 E0.01621 ; infill
;WIDTH:0.4467
G1 X115.384 Y114.880 E0.00568 ; infill
G1 X115.423 Y114.776 E0.00375 ; infill
;WIDTH:0.406422
G1 X115.433 Y114.748 E0.00090 ; infill
;WIDTH:0.398093
G1 X115.438 Y114.710 E0.00111 ; infill
;WIDTH:0.387683
G1 X115.456 Y114.480 E0.00662 ; infill
;WIDTH:0.348341
G1 X115.474 Y114.250 E0.00587 ; infill
;WIDTH:0.309
G1 X115.513 Y113.559 E0.01530 ; infill
;WIDTH:0.285102
G1 X115.502 Y112.943 E0.01242 ; infill
G1 X115.508 Y112.576 E0.00739 ; infill
G1 X115.525 Y112.493 E0.00170 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.508 Y112.576 E-0.02222 ; wipe and retract
G1 X115.502 Y112.943 E-0.09684 ; wipe and retract
G1 X115.513 Y113.559 E-0.16279 ; wipe and retract
;WIPE_END
G1 E-2.11815 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 X115.734 Y105.593 ; move to first perimeter point
G1 Z15.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.524 Y105.661 E0.01023 ; perimeter
G1 X115.409 Y105.650 E0.00535 ; perimeter
G1 X115.283 Y105.585 E0.00659 ; perimeter
G1 X115.174 Y105.443 E0.00828 ; perimeter
G1 X115.135 Y105.267 E0.00835 ; perimeter
G1 X115.160 Y105.076 E0.00896 ; perimeter
G1 X115.214 Y104.969 E0.00553 ; perimeter
G1 X115.266 Y104.922 E0.00328 ; perimeter
G1 X115.378 Y104.870 E0.00571 ; perimeter
G1 X115.580 Y104.869 E0.00932 ; perimeter
G1 X115.768 Y104.940 E0.00932 ; perimeter
G1 X115.824 Y104.996 E0.00370 ; perimeter
G1 X115.871 Y105.090 E0.00485 ; perimeter
G1 X115.895 Y105.268 E0.00832 ; perimeter
G1 X115.859 Y105.450 E0.00860 ; perimeter
G1 X115.780 Y105.555 E0.00608 ; perimeter
G1 X115.537 Y105.494 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:15.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;15.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.524 Y105.661 E-0.07317 ; wipe and retract
G1 X115.409 Y105.650 E-0.03049 ; wipe and retract
G1 X115.283 Y105.585 E-0.03754 ; wipe and retract
G1 X115.174 Y105.443 E-0.04716 ; wipe and retract
G1 X115.135 Y105.267 E-0.04756 ; wipe and retract
G1 X115.160 Y105.076 E-0.05103 ; wipe and retract
G1 X115.214 Y104.969 E-0.03149 ; wipe and retract
G1 X115.266 Y104.922 E-0.01867 ; wipe and retract
G1 X115.378 Y104.870 E-0.03253 ; wipe and retract
G1 X115.580 Y104.869 E-0.05310 ; wipe and retract
G1 X115.768 Y104.940 E-0.05308 ; wipe and retract
G1 X115.824 Y104.996 E-0.02105 ; wipe and retract
G1 X115.871 Y105.090 E-0.02762 ; wipe and retract
G1 X115.895 Y105.268 E-0.04741 ; wipe and retract
G1 X115.859 Y105.450 E-0.04901 ; wipe and retract
G1 X115.780 Y105.555 E-0.03464 ; wipe and retract
;WIPE_END
G1 E-1.74444 F2400.000 ; retract
G1 Z15.475 F10800.000 ; lift Z
G1 Z15.600 ; move to next layer (77)
;AFTER_LAYER_CHANGE
;15.6
G1 X115.771 Y105.544 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.684 Y105.599 E0.00476 ; perimeter
G1 X115.529 Y105.635 E0.00738 ; perimeter
G1 X115.401 Y105.623 E0.00598 ; perimeter
G1 X115.294 Y105.574 E0.00543 ; perimeter
G1 X115.180 Y105.433 E0.00838 ; perimeter
G1 X115.133 Y105.224 E0.00993 ; perimeter
G1 X115.153 Y105.073 E0.00706 ; perimeter
G1 X115.217 Y104.947 E0.00654 ; perimeter
G1 X115.266 Y104.901 E0.00312 ; perimeter
G1 X115.403 Y104.840 E0.00696 ; perimeter
G1 X115.564 Y104.837 E0.00745 ; perimeter
G1 X115.774 Y104.928 E0.01060 ; perimeter
G1 X115.859 Y105.029 E0.00611 ; perimeter
G1 X115.896 Y105.239 E0.00987 ; perimeter
G1 X115.856 Y105.436 E0.00934 ; perimeter
G1 X115.816 Y105.505 E0.00367 ; perimeter
G1 X115.672 Y105.516 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.684 Y105.599 E-0.04278 ; wipe and retract
G1 X115.529 Y105.635 E-0.04207 ; wipe and retract
G1 X115.401 Y105.623 E-0.03406 ; wipe and retract
G1 X115.294 Y105.574 E-0.03092 ; wipe and retract
G1 X115.180 Y105.433 E-0.04776 ; wipe and retract
G1 X115.133 Y105.224 E-0.05658 ; wipe and retract
G1 X115.153 Y105.073 E-0.04020 ; wipe and retract
G1 X115.217 Y104.947 E-0.03724 ; wipe and retract
G1 X115.266 Y104.901 E-0.01777 ; wipe and retract
G1 X115.403 Y104.840 E-0.03967 ; wipe and retract
G1 X115.564 Y104.837 E-0.04245 ; wipe and retract
G1 X115.774 Y104.928 E-0.06039 ; wipe and retract
G1 X115.859 Y105.029 E-0.03480 ; wipe and retract
G1 X115.896 Y105.239 E-0.05621 ; wipe and retract
G1 X115.856 Y105.436 E-0.05323 ; wipe and retract
G1 X115.816 Y105.505 E-0.02093 ; wipe and retract
;WIPE_END
G1 E-1.74294 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X115.449 Y112.054 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.696 Y112.088 E0.01156 ; perimeter
G1 X115.774 Y112.140 E0.00432 ; perimeter
G1 X115.876 Y112.295 E0.00863 ; perimeter
G1 X115.895 Y112.512 E0.01008 ; perimeter
G1 X115.891 Y112.903 E0.01810 ; perimeter
G1 X115.857 Y112.947 E0.00258 ; perimeter
G1 X115.834 Y113.522 E0.02669 ; perimeter
G1 X115.859 Y113.694 E0.00804 ; perimeter
G1 X115.848 Y114.844 E0.05327 ; perimeter
G1 X115.796 Y115.066 E0.01056 ; perimeter
G1 X115.760 Y115.133 E0.00354 ; perimeter
G1 X115.321 Y115.554 E0.02816 ; perimeter
G1 X115.115 Y115.819 E0.01558 ; perimeter
G1 X115.000 Y115.914 E0.00690 ; perimeter
G1 X114.872 Y115.976 E0.00660 ; perimeter
G1 X114.775 Y115.993 E0.00455 ; perimeter
G1 X114.622 Y115.949 E0.00739 ; perimeter
G1 X114.500 Y115.875 E0.00660 ; perimeter
G1 X114.452 Y115.818 E0.00344 ; perimeter
G1 X114.405 Y115.699 E0.00591 ; perimeter
G1 X114.394 Y115.552 E0.00686 ; perimeter
G1 X114.415 Y115.416 E0.00634 ; perimeter
G1 X114.467 Y115.312 E0.00540 ; perimeter
G1 X114.832 Y114.934 E0.02431 ; perimeter
G1 X115.030 Y114.584 E0.01865 ; perimeter
G1 X115.081 Y114.201 E0.01788 ; perimeter
G1 X115.084 Y113.961 E0.01114 ; perimeter
G1 X115.180 Y113.384 E0.02709 ; perimeter
G1 X115.156 Y112.858 E0.02438 ; perimeter
G1 X115.122 Y112.767 E0.00452 ; perimeter
G1 X115.133 Y112.440 E0.01517 ; perimeter
G1 X115.172 Y112.272 E0.00795 ; perimeter
G1 X115.321 Y112.098 E0.01064 ; perimeter
G1 X115.392 Y112.073 E0.00347 ; perimeter
G1 X115.601 Y112.252 F10800.000 ; move inwards before travel
G1 X115.615 Y112.344 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301227
G1 F2400.000
G1 X115.515 Y112.445 E0.00306 ; infill
G1 X115.514 Y112.804 E0.00770 ; infill
;WIDTH:0.280626
G1 X115.508 Y112.855 E0.00102 ; infill
;WIDTH:0.264385
G1 X115.510 Y113.394 E0.00993 ; infill
;WIDTH:0.218553
G1 X115.494 Y113.719 E0.00475 ; infill
;WIDTH:0.333534
G1 X115.423 Y114.753 E0.02503 ; infill
;WIDTH:0.432698
G1 X115.380 Y114.876 E0.00424 ; infill
G1 X115.307 Y114.969 E0.00383 ; infill
;WIDTH:0.423863
G1 X115.235 Y115.063 E0.00375 ; infill
;WIDTH:0.389305
G1 X115.162 Y115.156 E0.00341 ; infill
;WIDTH:0.354746
G1 X115.038 Y115.284 E0.00461 ; infill
;WIDTH:0.34338
G1 X114.807 Y115.546 E0.00874 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.038 Y115.284 E-0.09228 ; wipe and retract
;WIPE_END
G1 E-2.30772 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X112.466 Y115.754 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.421 Y115.923 E0.00811 ; perimeter
G1 X112.325 Y116.046 E0.00722 ; perimeter
G1 X112.200 Y116.122 E0.00677 ; perimeter
G1 X112.036 Y116.157 E0.00778 ; perimeter
G1 X111.845 Y116.150 E0.00884 ; perimeter
G1 X111.644 Y116.074 E0.00995 ; perimeter
G1 X111.517 Y115.904 E0.00982 ; perimeter
G1 X111.471 Y115.733 E0.00823 ; perimeter
G1 X111.498 Y115.623 E0.00524 ; perimeter
G1 X111.600 Y115.462 E0.00881 ; perimeter
G1 X111.828 Y115.377 E0.01126 ; perimeter
G1 X112.041 Y115.359 E0.00992 ; perimeter
G1 X112.296 Y115.453 E0.01259 ; perimeter
G1 X112.372 Y115.515 E0.00456 ; perimeter
G1 X112.456 Y115.694 E0.00916 ; perimeter
G1 X112.314 Y115.841 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.421 Y115.923 E-0.06102 ; wipe and retract
G1 X112.325 Y116.046 E-0.04115 ; wipe and retract
G1 X112.200 Y116.122 E-0.03856 ; wipe and retract
G1 X112.036 Y116.157 E-0.04433 ; wipe and retract
G1 X111.845 Y116.150 E-0.05038 ; wipe and retract
G1 X111.644 Y116.074 E-0.05669 ; wipe and retract
G1 X111.517 Y115.904 E-0.05596 ; wipe and retract
G1 X111.471 Y115.733 E-0.04690 ; wipe and retract
G1 X111.498 Y115.623 E-0.02983 ; wipe and retract
G1 X111.600 Y115.462 E-0.05020 ; wipe and retract
G1 X111.828 Y115.377 E-0.06414 ; wipe and retract
G1 X112.041 Y115.359 E-0.05653 ; wipe and retract
G1 X112.296 Y115.453 E-0.07175 ; wipe and retract
G1 X112.372 Y115.515 E-0.02599 ; wipe and retract
G1 X112.456 Y115.694 E-0.05219 ; wipe and retract
;WIPE_END
G1 E-1.65438 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X109.221 Y113.375 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.109 Y113.213 E0.00914 ; perimeter
G1 X109.074 Y113.053 E0.00759 ; perimeter
G1 X109.122 Y112.759 E0.01378 ; perimeter
G1 X109.118 Y112.640 E0.00553 ; perimeter
G1 X109.214 Y112.266 E0.01787 ; perimeter
G1 X109.102 Y112.060 E0.01085 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.046 Y111.799 E0.01119 ; perimeter (bridge)
G1 X108.937 Y111.732 E0.00533 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.790 Y111.640 E0.00803 ; perimeter
G1 X108.143 Y111.019 E0.04155 ; perimeter
G1 X107.595 Y110.385 E0.03881 ; perimeter
G1 X107.477 Y110.202 E0.01010 ; perimeter
G1 X107.400 Y109.967 E0.01143 ; perimeter
G1 X107.377 Y109.679 E0.01338 ; perimeter
G1 X107.447 Y109.480 E0.00982 ; perimeter
G1 X107.507 Y109.405 E0.00444 ; perimeter
G1 X107.651 Y109.373 E0.00684 ; perimeter
G1 X107.892 Y109.473 E0.01206 ; perimeter
G1 X108.119 Y109.712 E0.01527 ; perimeter
G1 X108.462 Y110.262 E0.03003 ; perimeter
G1 X108.864 Y110.987 E0.03840 ; perimeter
G1 X109.061 Y111.419 E0.02200 ; perimeter
G1 X109.091 Y111.627 E0.00972 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.203 Y111.757 E0.00720 ; perimeter (bridge)
G1 X109.279 Y111.939 E0.00824 ; perimeter (bridge)
G1 X109.309 Y111.973 E0.00193 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.798 Y112.520 E0.03398 ; perimeter
G1 X109.881 Y112.651 E0.00716 ; perimeter
G1 X109.919 Y112.769 E0.00575 ; perimeter
G1 X109.908 Y112.824 E0.00259 ; perimeter
G1 X109.927 Y112.951 E0.00596 ; perimeter
G1 X109.871 Y113.144 E0.00926 ; perimeter
G1 X109.767 Y113.310 E0.00910 ; perimeter
G1 X109.667 Y113.406 E0.00642 ; perimeter
G1 X109.534 Y113.442 E0.00637 ; perimeter
G1 X109.372 Y113.455 E0.00755 ; perimeter
G1 X109.269 Y113.411 E0.00518 ; perimeter
G1 X109.258 Y113.182 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.109 Y113.213 E-0.06723 ; wipe and retract
G1 X109.074 Y113.053 E-0.04323 ; wipe and retract
G1 X109.122 Y112.759 E-0.07848 ; wipe and retract
G1 X109.118 Y112.640 E-0.03148 ; wipe and retract
G1 X109.214 Y112.266 E-0.10183 ; wipe and retract
G1 X109.102 Y112.060 E-0.06184 ; wipe and retract
;WIPE_END
G1 E-2.01592 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X108.643 Y111.135 ; move to first infill point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.0993089
G1 F2400.000
G1 X108.462 Y110.898 E0.00140 ; infill
;WIDTH:0.217471
G1 X108.142 Y110.450 E0.00799 ; infill
;WIDTH:0.33274
G1 X107.843 Y110.028 E0.01247 ; infill
G1 X107.661 Y109.638 E0.01038 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.843 Y110.028 E-0.11366 ; wipe and retract
G1 X108.142 Y110.450 E-0.13653 ; wipe and retract
;WIPE_END
G1 E-2.14980 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X103.518 Y107.065 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.388 Y107.134 E0.00498 ; perimeter
G1 X103.278 Y106.950 E0.00724 ; perimeter
G1 X103.464 Y107.039 E0.00697 ; perimeter
G1 X104.331 Y106.936 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.406 Y107.027 E0.00550 ; perimeter
G1 X104.405 Y107.100 E0.00337 ; perimeter
G1 X104.309 Y107.243 E0.00796 ; perimeter
G1 X104.034 Y107.389 E0.01441 ; perimeter
G1 X103.865 Y107.427 E0.00801 ; perimeter
G1 X103.525 Y107.607 E0.01782 ; perimeter
G1 X103.348 Y107.637 E0.00832 ; perimeter
G1 X103.193 Y107.601 E0.00737 ; perimeter
G1 X103.034 Y107.482 E0.00918 ; perimeter
G1 X102.870 Y107.207 E0.01486 ; perimeter
G1 X102.279 Y106.610 E0.03891 ; perimeter
G1 X101.812 Y106.238 E0.02765 ; perimeter
G1 X101.458 Y106.046 E0.01866 ; perimeter
G1 X101.269 Y105.894 E0.01121 ; perimeter
G1 X101.138 Y105.716 E0.01024 ; perimeter
G1 X101.034 Y105.499 E0.01115 ; perimeter
G1 X100.971 Y105.123 E0.01767 ; perimeter
G1 X101.033 Y104.872 E0.01198 ; perimeter
G1 X101.122 Y104.726 E0.00791 ; perimeter
G1 X101.266 Y104.698 E0.00679 ; perimeter
G1 X101.447 Y104.731 E0.00852 ; perimeter
G1 X101.594 Y104.870 E0.00938 ; perimeter
G1 X101.935 Y105.260 E0.02400 ; perimeter
G1 X102.050 Y105.446 E0.01013 ; perimeter
G1 X103.451 Y106.499 E0.08120 ; perimeter
G1 X103.924 Y106.726 E0.02428 ; perimeter
G1 X104.135 Y106.793 E0.01027 ; perimeter
G1 X104.296 Y106.894 E0.00877 ; perimeter
G1 X104.304 Y107.051 F10800.000 ; move inwards before travel
G1 X103.094 Y106.794 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.430399
G1 F2400.000
G1 X102.761 Y106.506 E0.01421 ; infill
;WIDTH:0.392147
G1 X102.550 Y106.321 E0.00813 ; infill
;WIDTH:0.352338
G1 X102.037 Y105.922 E0.01674 ; infill
;WIDTH:0.337864
G1 X101.697 Y105.688 E0.01012 ; infill
;WIDTH:0.467304
G1 X101.444 Y105.356 E0.01470 ; infill
;WIDTH:0.425763
G1 X101.254 Y104.983 E0.01334 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.444 Y105.356 E-0.11058 ; wipe and retract
;WIPE_END
G1 E-2.28942 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X100.218 Y102.968 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.116 Y103.077 E0.00692 ; perimeter
G1 X99.978 Y103.080 E0.00640 ; perimeter
G1 X99.765 Y103.002 E0.01048 ; perimeter
G1 X99.632 Y103.013 E0.00619 ; perimeter
G1 X99.455 Y102.896 E0.00984 ; perimeter
G1 X99.333 Y102.748 E0.00888 ; perimeter
G1 X99.182 Y102.418 E0.01680 ; perimeter
G1 X99.131 Y102.188 E0.01091 ; perimeter
G1 X99.033 Y101.897 E0.01424 ; perimeter
G1 X98.988 Y101.600 E0.01390 ; perimeter
G1 X98.897 Y101.363 E0.01175 ; perimeter
G1 X98.856 Y101.167 E0.00928 ; perimeter
G1 X98.659 Y100.807 E0.01901 ; perimeter
G1 X98.559 Y100.564 E0.01217 ; perimeter
G1 X98.536 Y100.228 E0.01562 ; perimeter
G1 X98.636 Y99.907 E0.01559 ; perimeter
G1 X98.783 Y99.770 E0.00932 ; perimeter
G1 X99.014 Y99.786 E0.01070 ; perimeter
G1 X99.162 Y99.907 E0.00886 ; perimeter
G1 X99.271 Y100.076 E0.00931 ; perimeter
G1 X99.341 Y100.345 E0.01289 ; perimeter
G1 X99.328 Y100.487 E0.00659 ; perimeter
G1 X99.387 Y101.134 E0.03010 ; perimeter
G1 X99.660 Y101.710 E0.02952 ; perimeter
G1 X100.193 Y102.546 E0.04594 ; perimeter
G1 X100.245 Y102.825 E0.01314 ; perimeter
G1 X100.230 Y102.910 E0.00398 ; perimeter
G1 X100.068 Y102.974 F10800.000 ; move inwards before travel
G1 X99.990 Y102.772 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.271833
G1 F2400.000
G1 X99.763 Y102.606 E0.00536 ; infill
;WIDTH:0.377553
G1 X99.688 Y102.526 E0.00304 ; infill
G1 X99.560 Y102.291 E0.00743 ; infill
;WIDTH:0.353775
G1 X99.520 Y102.195 E0.00271 ; infill
;WIDTH:0.317345
G1 X99.480 Y102.098 E0.00239 ; infill
;WIDTH:0.280915
G1 X99.424 Y101.980 E0.00257 ; infill
;WIDTH:0.248759
G1 X99.374 Y101.875 E0.00201 ; infill
;WIDTH:0.220375
G1 X99.351 Y101.820 E0.00087 ; infill
;WIDTH:0.212778
G1 X99.307 Y101.676 E0.00212 ; infill
;WIDTH:0.169033
G1 X99.263 Y101.532 E0.00158 ; infill
;WIDTH:0.125289
G1 X99.159 Y101.286 E0.00183 ; infill
;WIDTH:0.104063
G1 X99.140 Y101.232 E0.00029 ; infill
G1 X99.099 Y101.122 F10800.000 ; move to first infill point
;WIDTH:0.325039
G1 F2400.000
G1 X98.941 Y100.475 E0.01563 ; infill
G1 X98.931 Y100.030 E0.01045 ; infill
G1 X98.893 Y100.015 F10800.000 ; move to first infill point
;WIDTH:0.150959
G1 F2400.000
G1 X98.917 Y100.776 E0.00684 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.893 Y100.015 E-0.20091 ; wipe and retract
;WIPE_END
G1 E-2.19909 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X98.725 Y97.126 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.652 Y97.015 E0.00617 ; perimeter
G1 X98.638 Y96.855 E0.00740 ; perimeter
G1 X98.579 Y96.631 E0.01074 ; perimeter
G1 X98.608 Y96.399 E0.01083 ; perimeter
G1 X98.749 Y96.166 E0.01260 ; perimeter
G1 X99.129 Y95.715 E0.02733 ; perimeter
G1 X99.348 Y95.356 E0.01948 ; perimeter
G1 X99.723 Y94.883 E0.02795 ; perimeter
G1 X100.055 Y94.617 E0.01969 ; perimeter
G1 X100.652 Y94.461 E0.02860 ; perimeter
G1 X101.472 Y94.408 E0.03806 ; perimeter
G1 X101.952 Y94.294 E0.02284 ; perimeter
G1 X102.167 Y94.281 E0.00998 ; perimeter
G1 X102.509 Y94.196 E0.01631 ; perimeter
G1 X103.385 Y94.189 E0.04061 ; perimeter
G1 X103.456 Y94.155 E0.00364 ; perimeter
G1 X103.801 Y94.094 E0.01623 ; perimeter
G1 X104.369 Y94.096 E0.02630 ; perimeter
G1 X104.644 Y94.177 E0.01329 ; perimeter
G1 X104.866 Y94.361 E0.01338 ; perimeter
G1 X104.904 Y94.508 E0.00702 ; perimeter
G1 X104.835 Y94.696 E0.00931 ; perimeter
G1 X104.623 Y94.832 E0.01164 ; perimeter
G1 X104.393 Y94.888 E0.01095 ; perimeter
G1 X103.905 Y94.910 E0.02262 ; perimeter
G1 X103.331 Y94.808 E0.02704 ; perimeter
G1 X102.794 Y94.936 E0.02554 ; perimeter
G1 X102.388 Y94.967 E0.01890 ; perimeter
G1 X102.307 Y94.989 E0.00387 ; perimeter
G1 X101.987 Y94.988 E0.01483 ; perimeter
G1 X101.295 Y95.115 E0.03261 ; perimeter
G1 X100.349 Y95.456 E0.04656 ; perimeter
G1 X100.186 Y95.647 E0.01161 ; perimeter
G1 X99.928 Y95.890 E0.01642 ; perimeter
G1 X99.636 Y96.281 E0.02260 ; perimeter
G1 X99.429 Y96.685 E0.02106 ; perimeter
G1 X99.386 Y96.903 E0.01029 ; perimeter
G1 X99.219 Y97.192 E0.01546 ; perimeter
G1 X99.186 Y97.293 E0.00492 ; perimeter
G1 X99.036 Y97.395 E0.00840 ; perimeter
G1 X99.000 Y97.347 E0.00278 ; perimeter
G1 X98.768 Y97.168 E0.01357 ; perimeter
G1 X98.774 Y97.002 F10800.000 ; move inwards before travel
G1 X98.948 Y97.007 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.405779
G1 F2400.000
G1 X99.022 Y96.543 E0.01419 ; infill
G1 X99.201 Y96.252 E0.01030 ; infill
;WIDTH:0.305552
G1 X99.437 Y95.925 E0.00881 ; infill
;WIDTH:0.34197
G1 X99.645 Y95.619 E0.00919 ; infill
;WIDTH:0.354136
G1 X100.025 Y95.184 E0.01496 ; infill
G1 X100.146 Y95.083 E0.00408 ; infill
G1 X100.258 Y95.020 E0.00330 ; infill
G1 X100.720 Y94.877 E0.01252 ; infill
G1 X101.036 Y94.811 E0.00836 ; infill
;WIDTH:0.224417
G1 X101.529 Y94.735 E0.00753 ; infill
;WIDTH:0.248126
G1 X101.966 Y94.644 E0.00762 ; infill
;WIDTH:0.25698
G1 X102.003 Y94.640 E0.00067 ; infill
;WIDTH:0.270672
G1 X102.211 Y94.634 E0.00394 ; infill
;WIDTH:0.28062
G1 X102.337 Y94.610 E0.00252 ; infill
;WIDTH:0.306023
G1 X102.927 Y94.543 E0.01300 ; infill
;WIDTH:0.175417
G1 X103.335 Y94.496 E0.00452 ; infill
;WIDTH:0.194737
G1 X103.443 Y94.506 E0.00136 ; infill
;WIDTH:0.209504
G1 X103.479 Y94.505 E0.00050 ; infill
G1 X103.566 Y94.492 F10800.000 ; move to first infill point
;WIDTH:0.312272
G1 F2400.000
G1 X103.703 Y94.493 E0.00308 ; infill
;WIDTH:0.362529
G1 X104.293 Y94.491 E0.01566 ; infill
G1 X104.638 Y94.533 E0.00925 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.293 Y94.491 E-0.09181 ; wipe and retract
G1 X103.703 Y94.493 E-0.15550 ; wipe and retract
;WIPE_END
G1 E-2.15269 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X99.105 Y96.118 ; move to first infill point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.339392
G1 F2400.000
G1 X99.015 Y96.778 E0.01642 ; infill
;WIDTH:0.329172
G1 X98.970 Y97.028 E0.00606 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.015 Y96.778 E-0.06716 ; wipe and retract
;WIPE_END
G1 E-2.33284 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X111.024 Y97.512 ; move to first perimeter point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.110 Y97.558 E0.00329 ; perimeter
G1 X111.237 Y97.699 E0.00646 ; perimeter
G1 X111.316 Y98.045 E0.01201 ; perimeter
G1 X111.487 Y98.605 E0.01983 ; perimeter
G1 X111.402 Y98.495 E0.00471 ; perimeter
G1 X111.272 Y97.983 E0.01790 ; perimeter
G1 X111.156 Y97.712 E0.00998 ; perimeter
G1 X111.057 Y97.562 E0.00607 ; perimeter
G1 X110.550 Y97.670 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.269 Y97.510 E0.01497 ; perimeter
G1 X110.013 Y97.434 E0.01237 ; perimeter
G1 X109.831 Y97.414 E0.00850 ; perimeter
G1 X109.222 Y97.179 E0.03025 ; perimeter
G1 X109.058 Y97.095 E0.00853 ; perimeter
G1 X108.799 Y97.040 E0.01227 ; perimeter
G1 X108.234 Y96.840 E0.02773 ; perimeter
G1 X107.601 Y96.528 E0.03271 ; perimeter
G1 X107.230 Y96.304 E0.02008 ; perimeter
G1 X107.083 Y96.113 E0.01118 ; perimeter
G1 X107.008 Y95.829 E0.01359 ; perimeter
G1 X107.049 Y95.583 E0.01152 ; perimeter
G1 X107.180 Y95.485 E0.00759 ; perimeter
G1 X107.229 Y95.471 E0.00236 ; perimeter
G1 X107.478 Y95.517 E0.01170 ; perimeter
G1 X107.708 Y95.628 E0.01187 ; perimeter
G1 X108.212 Y95.958 E0.02786 ; perimeter
G1 X108.940 Y96.247 E0.03633 ; perimeter
G1 X109.367 Y96.450 E0.02187 ; perimeter
G1 X109.856 Y96.567 E0.02330 ; perimeter
G1 X110.144 Y96.692 E0.01453 ; perimeter
G1 X110.353 Y96.738 E0.00992 ; perimeter
G1 X110.547 Y96.851 E0.01039 ; perimeter
G1 X110.856 Y96.926 E0.01473 ; perimeter
G1 X111.208 Y97.064 E0.01750 ; perimeter
G1 X111.411 Y97.172 E0.01067 ; perimeter
G1 X111.644 Y97.430 E0.01608 ; perimeter
G1 X111.694 Y97.531 E0.00523 ; perimeter
G1 X111.782 Y97.921 E0.01853 ; perimeter
G1 X111.966 Y98.524 E0.02918 ; perimeter
G1 X112.129 Y98.906 E0.01922 ; perimeter
G1 X112.331 Y99.263 E0.01902 ; perimeter
G1 X112.645 Y99.617 E0.02190 ; perimeter
G1 X113.409 Y100.641 E0.05918 ; perimeter
G1 X113.467 Y100.895 E0.01205 ; perimeter
G1 X113.426 Y101.278 E0.01785 ; perimeter
G1 X113.279 Y101.538 E0.01386 ; perimeter
G1 X113.179 Y101.564 E0.00478 ; perimeter
G1 X113.011 Y101.508 E0.00819 ; perimeter
G1 X112.862 Y101.401 E0.00852 ; perimeter
G1 X112.704 Y101.193 E0.01209 ; perimeter
G1 X112.376 Y100.561 E0.03299 ; perimeter
G1 X111.669 Y99.378 E0.06384 ; perimeter
G1 X111.455 Y99.239 E0.01181 ; perimeter
G1 X111.111 Y98.914 E0.02192 ; perimeter
G1 X110.958 Y98.706 E0.01198 ; perimeter
G1 X110.814 Y98.138 E0.02713 ; perimeter
G1 X110.730 Y97.941 E0.00991 ; perimeter
G1 X110.583 Y97.720 E0.01229 ; perimeter
G1 X110.606 Y97.351 F10800.000 ; move inwards before travel
G1 X110.842 Y97.354 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352406
G1 F2400.000
G1 X110.635 Y97.272 E0.00572 ; infill
;WIDTH:0.313683
G1 X110.429 Y97.190 E0.00500 ; infill
;WIDTH:0.274958
G1 X110.213 Y97.097 E0.00453 ; infill
G1 X109.916 Y97.025 E0.00590 ; infill
G1 X109.704 Y96.934 E0.00444 ; infill
G1 X109.369 Y96.834 E0.00675 ; infill
G1 X108.781 Y96.612 E0.01211 ; infill
;WIDTH:0.372443
G1 X108.045 Y96.312 E0.02180 ; infill
;WIDTH:0.342683
G1 X107.510 Y95.991 E0.01555 ; infill
G1 X107.260 Y95.787 E0.00804 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.510 Y95.991 E-0.08511 ; wipe and retract
G1 X108.045 Y96.312 E-0.16460 ; wipe and retract
;WIPE_END
G1 E-2.15029 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 X111.635 Y98.797 ; move to first infill point
G1 Z15.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.189271
G1 F2400.000
G1 X111.912 Y99.167 E0.00563 ; infill
G1 X112.080 Y99.452 E0.00402 ; infill
;WIDTH:0.234336
G1 X112.223 Y99.648 E0.00386 ; infill
;WIDTH:0.279402
G1 X112.366 Y99.843 E0.00477 ; infill
;WIDTH:0.311341
G1 X112.541 Y100.105 E0.00702 ; infill
;WIDTH:0.344501
G1 X112.721 Y100.374 E0.00812 ; infill
;WIDTH:0.388077
G1 X112.863 Y100.601 E0.00768 ; infill
;WIDTH:0.43165
G1 X113.005 Y100.828 E0.00865 ; infill
G1 X113.161 Y101.251 E0.01458 ; infill
;LAYER_CHANGE
;Z:15.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;15.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.005 Y100.828 E-0.11904 ; wipe and retract
G1 X112.863 Y100.601 E-0.07066 ; wipe and retract
;WIPE_END
G1 E-2.21030 F2400.000 ; retract
G1 Z15.675 F10800.000 ; lift Z
G1 Z15.800 ; move to next layer (78)
;AFTER_LAYER_CHANGE
;15.8
G1 Z15.875 ; lift Z
G1 X99.062 Y100.962 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.787 Y100.819 E0.01433 ; perimeter
G1 X98.654 Y100.643 E0.01022 ; perimeter
G1 X98.555 Y100.435 E0.01068 ; perimeter
G1 X98.528 Y100.147 E0.01341 ; perimeter
G1 X98.534 Y100.011 E0.00631 ; perimeter
G1 X98.679 Y99.633 E0.01874 ; perimeter
G1 X98.777 Y99.536 E0.00639 ; perimeter
G1 X98.887 Y99.268 E0.01342 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X98.940 Y99.137 E0.00591 ; perimeter (bridge)
G1 X99.010 Y99.282 E0.00671 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.072 Y99.598 E0.01493 ; perimeter
G1 X99.146 Y99.662 E0.00450 ; perimeter
G1 X99.265 Y99.876 E0.01134 ; perimeter
G1 X99.282 Y100.083 E0.00964 ; perimeter
G1 X99.327 Y100.256 E0.00829 ; perimeter
G1 X99.241 Y100.827 E0.02676 ; perimeter
G1 X99.158 Y101.113 E0.01377 ; perimeter
G1 X99.511 Y101.763 E0.03427 ; perimeter
G1 X99.765 Y101.995 E0.01593 ; perimeter
G1 X100.017 Y102.308 E0.01860 ; perimeter
G1 X100.156 Y102.539 E0.01248 ; perimeter
G1 X100.195 Y102.724 E0.00874 ; perimeter
G1 X100.157 Y102.878 E0.00735 ; perimeter
G1 X100.099 Y102.963 E0.00479 ; perimeter
G1 X99.932 Y103.030 E0.00833 ; perimeter
G1 X99.688 Y103.046 E0.01133 ; perimeter
G1 X99.598 Y103.028 E0.00423 ; perimeter
G1 X99.467 Y102.942 E0.00726 ; perimeter
G1 X99.383 Y102.843 E0.00602 ; perimeter
G1 X99.249 Y102.555 E0.01471 ; perimeter
G1 X99.205 Y102.330 E0.01064 ; perimeter
G1 X99.226 Y102.265 E0.00317 ; perimeter
G1 X99.150 Y101.484 E0.03631 ; perimeter
G1 X99.072 Y101.021 E0.02177 ; perimeter
G1 X99.146 Y100.664 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.787 Y100.819 E-0.09205 ; wipe and retract
G1 X98.654 Y100.643 E-0.05824 ; wipe and retract
G1 X98.555 Y100.435 E-0.06087 ; wipe and retract
G1 X98.528 Y100.147 E-0.07637 ; wipe and retract
G1 X98.534 Y100.011 E-0.03595 ; wipe and retract
G1 X98.679 Y99.633 E-0.10679 ; wipe and retract
G1 X98.777 Y99.536 E-0.03640 ; wipe and retract
G1 X98.887 Y99.268 E-0.07643 ; wipe and retract
;WIPE_END
G1 E-1.85690 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X103.374 Y94.655 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.055 Y94.757 E0.01550 ; perimeter
G1 X102.864 Y94.866 E0.01020 ; perimeter
G1 X102.506 Y94.960 E0.01714 ; perimeter
G1 X102.315 Y94.976 E0.00890 ; perimeter
G1 X102.115 Y95.031 E0.00962 ; perimeter
G1 X101.961 Y95.031 E0.00711 ; perimeter
G1 X101.456 Y95.142 E0.02396 ; perimeter
G1 X101.129 Y95.178 E0.01523 ; perimeter
G1 X100.306 Y95.471 E0.04047 ; perimeter
G1 X99.872 Y95.974 E0.03078 ; perimeter
G1 X99.580 Y96.393 E0.02364 ; perimeter
G1 X99.497 Y96.554 E0.00841 ; perimeter
G1 X99.420 Y96.840 E0.01370 ; perimeter
G1 X99.391 Y97.068 E0.01067 ; perimeter
G1 X99.356 Y97.129 E0.00324 ; perimeter
G1 X99.289 Y97.425 E0.01404 ; perimeter
G1 X99.106 Y97.890 E0.02317 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.049 Y98.033 E0.00644 ; perimeter (bridge)
G1 X99.050 Y97.919 E0.00480 ; perimeter (bridge)
G1 X99.032 Y97.899 E0.00110 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X98.920 Y97.773 E0.00782 ; perimeter
G1 X98.869 Y97.685 E0.00469 ; perimeter
G1 X98.783 Y97.320 E0.01739 ; perimeter
G1 X98.662 Y97.116 E0.01098 ; perimeter
G1 X98.612 Y96.652 E0.02164 ; perimeter
G1 X98.661 Y96.360 E0.01371 ; perimeter
G1 X98.817 Y96.090 E0.01445 ; perimeter
G1 X99.628 Y95.047 E0.06117 ; perimeter
G1 X99.818 Y94.856 E0.01249 ; perimeter
G1 X100.132 Y94.632 E0.01789 ; perimeter
G1 X100.842 Y94.429 E0.03420 ; perimeter
G1 X101.588 Y94.320 E0.03489 ; perimeter
G1 X102.140 Y94.285 E0.02564 ; perimeter
G1 X102.322 Y94.240 E0.00870 ; perimeter
G1 X102.735 Y94.243 E0.01913 ; perimeter
G1 X103.412 Y94.345 E0.03172 ; perimeter
G1 X103.845 Y94.134 E0.02232 ; perimeter
G1 X104.177 Y94.085 E0.01553 ; perimeter
G1 X104.622 Y94.105 E0.02066 ; perimeter
G1 X104.880 Y94.194 E0.01261 ; perimeter
G1 X105.080 Y94.319 E0.01095 ; perimeter
G1 X105.259 Y94.478 E0.01108 ; perimeter
G1 X105.277 Y94.548 E0.00336 ; perimeter
G1 X105.375 Y94.680 E0.00761 ; perimeter
G1 X105.243 Y94.690 E0.00615 ; perimeter
G1 X105.058 Y94.737 E0.00885 ; perimeter
G1 X104.856 Y94.858 E0.01090 ; perimeter
G1 X104.584 Y94.908 E0.01282 ; perimeter
G1 X104.294 Y94.904 E0.01345 ; perimeter
G1 X104.004 Y94.867 E0.01351 ; perimeter
G1 X103.793 Y94.761 E0.01094 ; perimeter
G1 X103.608 Y94.737 E0.00867 ; perimeter
G1 X103.431 Y94.675 E0.00868 ; perimeter
G1 X103.172 Y94.388 F10800.000 ; move inwards before travel
G1 X103.713 Y94.489 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.367877
G1 F2400.000
G1 X104.550 Y94.504 E0.02264 ; infill
G1 X104.896 Y94.488 E0.00936 ; infill
G1 X104.897 Y94.552 F10800.000 ; move to first infill point
;WIDTH:0.28516
G1 F2400.000
G1 X103.920 Y94.366 E0.02004 ; infill
G1 X102.917 Y94.558 F10800.000 ; move to first infill point
;WIDTH:0.213615
G1 F2400.000
G1 X102.366 Y94.605 E0.00785 ; infill
G1 X102.065 Y94.661 E0.00435 ; infill
G1 X101.908 Y94.667 E0.00222 ; infill
;WIDTH:0.337656
G1 X101.024 Y94.799 E0.02191 ; infill
G1 X100.325 Y95.014 E0.01792 ; infill
G1 X100.070 Y95.153 E0.00712 ; infill
G1 X99.576 Y95.735 E0.01870 ; infill
;WIDTH:0.322535
G1 X99.158 Y96.319 E0.01670 ; infill
G1 X99.069 Y96.507 E0.00483 ; infill
G1 X99.041 Y96.634 E0.00304 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.069 Y96.507 E-0.03451 ; wipe and retract
G1 X99.158 Y96.319 E-0.05480 ; wipe and retract
G1 X99.576 Y95.735 E-0.18955 ; wipe and retract
;WIPE_END
G1 E-2.12115 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X98.959 Y100.635 ; move to first infill point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.199435
G1 F2400.000
G1 X98.901 Y99.769 E0.01130 ; infill
G1 X98.892 Y99.761 F10800.000 ; move to first infill point
;WIDTH:0.269585
G1 F2400.000
G1 X98.906 Y100.134 E0.00704 ; infill
G1 X98.973 Y100.643 E0.00967 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.906 Y100.134 E-0.13539 ; wipe and retract
G1 X98.892 Y99.761 E-0.09857 ; wipe and retract
;WIPE_END
G1 E-2.16605 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X99.662 Y102.781 ; move to first infill point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.292589
G1 F2400.000
G1 X99.577 Y102.325 E0.00963 ; infill
;WIDTH:0.266582
G1 X99.509 Y102.088 E0.00459 ; infill
G1 X99.459 Y102.175 F10800.000 ; move to first infill point
;WIDTH:0.366218
G1 F2400.000
G1 X99.686 Y102.539 E0.01153 ; infill
;WIDTH:0.373384
G1 X99.738 Y102.634 E0.00297 ; infill
G1 X99.887 Y102.788 E0.00589 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.738 Y102.634 E-0.05660 ; wipe and retract
G1 X99.686 Y102.539 E-0.02849 ; wipe and retract
;WIPE_END
G1 E-2.31491 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X111.538 Y98.542 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.432 Y98.071 E0.01634 ; perimeter
G1 X111.230 Y97.629 E0.01646 ; perimeter
G1 X111.298 Y97.698 E0.00326 ; perimeter
G1 X111.380 Y97.864 E0.00629 ; perimeter
G1 X111.623 Y98.707 E0.02968 ; perimeter
G1 X111.565 Y98.596 E0.00423 ; perimeter
G1 X110.380 Y97.432 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.199 Y97.434 E0.00838 ; perimeter
G1 X110.092 Y97.403 E0.00517 ; perimeter
G1 X109.693 Y97.363 E0.01859 ; perimeter
G1 X109.120 Y97.173 E0.02798 ; perimeter
G1 X108.622 Y96.971 E0.02489 ; perimeter
G1 X107.691 Y96.470 E0.04894 ; perimeter
G1 X107.489 Y96.405 E0.00983 ; perimeter
G1 X107.232 Y96.260 E0.01371 ; perimeter
G1 X107.109 Y96.162 E0.00726 ; perimeter
G1 X106.937 Y95.943 E0.01290 ; perimeter
G1 X106.823 Y95.548 E0.01908 ; perimeter
G1 X106.779 Y95.518 E0.00245 ; perimeter
G1 X106.765 Y95.456 E0.00293 ; perimeter
G1 X106.788 Y95.409 E0.00246 ; perimeter
G1 X107.055 Y95.328 E0.01293 ; perimeter
G1 X107.331 Y95.377 E0.01296 ; perimeter
G1 X107.694 Y95.576 E0.01919 ; perimeter
G1 X108.040 Y95.916 E0.02247 ; perimeter
G1 X108.451 Y96.114 E0.02111 ; perimeter
G1 X109.170 Y96.320 E0.03465 ; perimeter
G1 X109.381 Y96.421 E0.01082 ; perimeter
G1 X109.830 Y96.525 E0.02135 ; perimeter
G1 X110.198 Y96.684 E0.01857 ; perimeter
G1 X110.569 Y96.908 E0.02009 ; perimeter
G1 X110.945 Y97.043 E0.01848 ; perimeter
G1 X111.251 Y97.113 E0.01457 ; perimeter
G1 X111.503 Y97.225 E0.01278 ; perimeter
G1 X111.700 Y97.424 E0.01297 ; perimeter
G1 X111.831 Y97.690 E0.01371 ; perimeter
G1 X112.102 Y98.629 E0.04531 ; perimeter
G1 X112.339 Y99.172 E0.02743 ; perimeter
G1 X112.648 Y99.560 E0.02296 ; perimeter
G1 X112.735 Y99.721 E0.00851 ; perimeter
G1 X112.903 Y99.943 E0.01286 ; perimeter
G1 X113.202 Y100.234 E0.01934 ; perimeter
G1 X113.453 Y100.583 E0.01988 ; perimeter
G1 X113.483 Y100.846 E0.01230 ; perimeter
G1 X113.409 Y101.115 E0.01291 ; perimeter
G1 X113.283 Y101.282 E0.00970 ; perimeter
G1 X113.147 Y101.345 E0.00691 ; perimeter
G1 X112.974 Y101.329 E0.00806 ; perimeter
G1 X112.834 Y101.235 E0.00782 ; perimeter
G1 X112.578 Y100.901 E0.01949 ; perimeter
G1 X112.409 Y100.588 E0.01647 ; perimeter
G1 X111.922 Y99.899 E0.03908 ; perimeter
G1 X111.568 Y99.345 E0.03046 ; perimeter
G1 X111.292 Y99.090 E0.01739 ; perimeter
G1 X111.229 Y98.995 E0.00530 ; perimeter
G1 X111.081 Y98.708 E0.01494 ; perimeter
G1 X110.971 Y98.220 E0.02317 ; perimeter
G1 X110.843 Y97.920 E0.01514 ; perimeter
G1 X110.680 Y97.658 E0.01429 ; perimeter
G1 X110.428 Y97.468 E0.01459 ; perimeter
G1 X110.334 Y97.258 F10800.000 ; move inwards before travel
G1 X110.513 Y97.144 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.351005
G1 F2400.000
G1 X109.257 Y96.800 E0.03337 ; infill
G1 X108.788 Y96.617 E0.01290 ; infill
;WIDTH:0.342069
G1 X108.638 Y96.556 E0.00403 ; infill
;WIDTH:0.307308
G1 X108.488 Y96.495 E0.00356 ; infill
;WIDTH:0.272547
G1 X108.337 Y96.434 E0.00310 ; infill
;WIDTH:0.237786
G1 X107.863 Y96.192 E0.00863 ; infill
;WIDTH:0.215926
G1 X107.814 Y96.160 E0.00084 ; infill
G1 X108.176 Y96.457 F10800.000 ; move to first infill point
;WIDTH:0.348428
G1 F2400.000
G1 X107.442 Y95.903 E0.02336 ; infill
G1 X107.113 Y95.685 E0.01001 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.442 Y95.903 E-0.10395 ; wipe and retract
G1 X108.176 Y96.457 E-0.24269 ; wipe and retract
;WIPE_END
G1 E-2.05337 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X111.749 Y98.916 ; move to first infill point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.303922
G1 F2400.000
G1 X111.882 Y99.107 E0.00506 ; infill
G1 X112.030 Y99.379 E0.00670 ; infill
;WIDTH:0.32803
G1 X112.419 Y99.938 E0.01616 ; infill
;WIDTH:0.33998
G1 X112.618 Y100.209 E0.00830 ; infill
;WIDTH:0.382026
G1 X112.763 Y100.380 E0.00633 ; infill
;WIDTH:0.408897
G1 X112.817 Y100.452 E0.00273 ; infill
;WIDTH:0.435767
G1 X112.871 Y100.523 E0.00293 ; infill
;WIDTH:0.458217
G1 X113.197 Y100.975 E0.01924 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.871 Y100.523 E-0.14706 ; wipe and retract
;WIPE_END
G1 E-2.25294 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X103.427 Y107.141 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.294 Y107.222 E0.00525 ; perimeter
G1 X103.114 Y106.950 E0.01105 ; perimeter
G1 X103.375 Y107.110 E0.01037 ; perimeter
G1 X104.060 Y106.950 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.094 Y107.124 E0.00823 ; perimeter
G1 X104.010 Y107.262 E0.00745 ; perimeter
G1 X103.802 Y107.444 E0.01281 ; perimeter
G1 X103.724 Y107.536 E0.00559 ; perimeter
G1 X103.577 Y107.613 E0.00767 ; perimeter
G1 X103.464 Y107.701 E0.00664 ; perimeter
G1 X103.292 Y107.744 E0.00823 ; perimeter
G1 X103.095 Y107.696 E0.00937 ; perimeter
G1 X102.936 Y107.570 E0.00939 ; perimeter
G1 X102.843 Y107.403 E0.00885 ; perimeter
G1 X102.643 Y107.118 E0.01616 ; perimeter
G1 X102.244 Y106.643 E0.02871 ; perimeter
G1 X101.767 Y106.278 E0.02782 ; perimeter
G1 X101.349 Y106.042 E0.02225 ; perimeter
G1 X101.278 Y105.985 E0.00420 ; perimeter
G1 X101.156 Y105.827 E0.00927 ; perimeter
G1 X101.033 Y105.568 E0.01327 ; perimeter
G1 X100.968 Y105.269 E0.01418 ; perimeter
G1 X100.964 Y105.149 E0.00553 ; perimeter
G1 X101.069 Y104.925 E0.01146 ; perimeter
G1 X101.154 Y104.851 E0.00524 ; perimeter
G1 X101.391 Y104.821 E0.01107 ; perimeter
G1 X101.502 Y104.835 E0.00517 ; perimeter
G1 X101.871 Y105.221 E0.02475 ; perimeter
G1 X102.080 Y105.558 E0.01835 ; perimeter
G1 X102.619 Y105.996 E0.03218 ; perimeter
G1 X103.259 Y106.474 E0.03699 ; perimeter
G1 X103.689 Y106.737 E0.02335 ; perimeter
G1 X103.780 Y106.766 E0.00442 ; perimeter
G1 X104.010 Y106.917 E0.01275 ; perimeter
G1 X103.964 Y107.099 F10800.000 ; move inwards before travel
G1 X102.939 Y106.785 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.40111
G1 F2400.000
G1 X102.726 Y106.584 E0.00872 ; infill
;WIDTH:0.354195
G1 X102.513 Y106.383 E0.00758 ; infill
;WIDTH:0.307282
G1 X101.798 Y105.840 E0.01973 ; infill
G1 X101.240 Y105.386 E0.01581 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.798 Y105.840 E-0.18978 ; wipe and retract
G1 X102.513 Y106.383 E-0.23688 ; wipe and retract
;WIPE_END
G1 E-1.97335 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X109.250 Y113.256 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.150 Y113.107 E0.00833 ; perimeter
G1 X109.088 Y112.875 E0.01109 ; perimeter
G1 X109.106 Y112.593 E0.01311 ; perimeter
G1 X109.046 Y112.353 E0.01143 ; perimeter
G1 X109.070 Y112.259 E0.00453 ; perimeter
G1 X108.964 Y112.065 E0.01024 ; perimeter
G1 X108.378 Y111.400 E0.04105 ; perimeter
G1 X107.861 Y110.743 E0.03871 ; perimeter
G1 X107.601 Y110.470 E0.01749 ; perimeter
G1 X107.469 Y110.245 E0.01209 ; perimeter
G1 X107.438 Y110.134 E0.00534 ; perimeter
G1 X107.464 Y109.990 E0.00677 ; perimeter
G1 X107.452 Y109.839 E0.00702 ; perimeter
G1 X107.548 Y109.634 E0.01046 ; perimeter
G1 X107.685 Y109.561 E0.00721 ; perimeter
G1 X107.847 Y109.563 E0.00750 ; perimeter
G1 X107.901 Y109.585 E0.00274 ; perimeter
G1 X108.156 Y109.800 E0.01544 ; perimeter
G1 X108.407 Y110.179 E0.02104 ; perimeter
G1 X108.771 Y110.672 E0.02841 ; perimeter
G1 X109.933 Y112.557 E0.10256 ; perimeter
G1 X109.977 Y112.717 E0.00767 ; perimeter
G1 X109.945 Y112.885 E0.00794 ; perimeter
G1 X109.956 Y112.955 E0.00329 ; perimeter
G1 X109.937 Y113.019 E0.00309 ; perimeter
G1 X109.779 Y113.239 E0.01254 ; perimeter
G1 X109.675 Y113.307 E0.00578 ; perimeter
G1 X109.448 Y113.350 E0.01066 ; perimeter
G1 X109.362 Y113.329 E0.00413 ; perimeter
G1 X109.300 Y113.289 E0.00341 ; perimeter
G1 X109.299 Y113.083 F10800.000 ; move inwards before travel
G1 X109.640 Y113.020 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33303
G1 F2400.000
G1 X109.479 Y112.538 E0.01226 ; infill
;WIDTH:0.312773
G1 X109.308 Y112.132 E0.00989 ; infill
;WIDTH:0.282348
G1 X109.137 Y111.725 E0.00878 ; infill
G1 X109.485 Y112.290 F10800.000 ; move to first infill point
;WIDTH:0.429327
G1 F2400.000
G1 X109.532 Y112.735 E0.01439 ; infill
G1 X109.520 Y112.832 E0.00314 ; infill
;WIDTH:0.41715
G1 X109.523 Y112.877 E0.00140 ; infill
;WIDTH:0.399764
G1 X109.583 Y112.895 E0.00187 ; infill
;WIDTH:0.357202
G1 X109.644 Y112.913 E0.00165 ; infill
;WIDTH:0.31464
G1 X109.704 Y112.930 E0.00143 ; infill
G1 X109.648 Y113.009 F10800.000 ; move to first infill point
;WIDTH:0.16254
G1 F2400.000
G1 X109.372 Y112.203 E0.00848 ; infill
;WIDTH:0.144294
G1 X109.199 Y111.906 E0.00289 ; infill
;WIDTH:0.126561
G1 X108.924 Y111.534 E0.00322 ; infill
;WIDTH:0.242671
G1 X108.159 Y110.495 E0.02143 ; infill
;WIDTH:0.336457
G1 X107.935 Y110.218 E0.00870 ; infill
G1 X107.862 Y110.102 E0.00334 ; infill
G1 X107.841 Y110.027 E0.00191 ; infill
;WIDTH:0.313982
G1 X107.744 Y109.802 E0.00551 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.841 Y110.027 E-0.06448 ; wipe and retract
;WIPE_END
G1 E-2.33552 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X111.900 Y115.386 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.185 Y115.380 E0.01322 ; perimeter
G1 X112.393 Y115.453 E0.01019 ; perimeter
G1 X112.463 Y115.509 E0.00418 ; perimeter
G1 X112.544 Y115.654 E0.00767 ; perimeter
G1 X112.559 Y115.744 E0.00424 ; perimeter
G1 X112.515 Y115.933 E0.00899 ; perimeter
G1 X112.416 Y116.052 E0.00719 ; perimeter
G1 X112.300 Y116.121 E0.00621 ; perimeter
G1 X112.128 Y116.156 E0.00815 ; perimeter
G1 X111.942 Y116.150 E0.00861 ; perimeter
G1 X111.791 Y116.105 E0.00732 ; perimeter
G1 X111.725 Y116.065 E0.00355 ; perimeter
G1 X111.620 Y115.922 E0.00824 ; perimeter
G1 X111.581 Y115.766 E0.00744 ; perimeter
G1 X111.598 Y115.638 E0.00598 ; perimeter
G1 X111.724 Y115.455 E0.01031 ; perimeter
G1 X111.844 Y115.408 E0.00596 ; perimeter
G1 X112.099 Y115.591 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.185 Y115.380 E-0.09034 ; wipe and retract
G1 X112.393 Y115.453 E-0.05804 ; wipe and retract
G1 X112.463 Y115.509 E-0.02379 ; wipe and retract
G1 X112.544 Y115.654 E-0.04369 ; wipe and retract
G1 X112.559 Y115.744 E-0.02415 ; wipe and retract
G1 X112.515 Y115.933 E-0.05119 ; wipe and retract
G1 X112.416 Y116.052 E-0.04095 ; wipe and retract
G1 X112.300 Y116.121 E-0.03537 ; wipe and retract
G1 X112.128 Y116.156 E-0.04645 ; wipe and retract
G1 X111.942 Y116.150 E-0.04906 ; wipe and retract
G1 X111.791 Y116.105 E-0.04171 ; wipe and retract
G1 X111.725 Y116.065 E-0.02023 ; wipe and retract
G1 X111.620 Y115.922 E-0.04695 ; wipe and retract
G1 X111.581 Y115.766 E-0.04239 ; wipe and retract
G1 X111.598 Y115.638 E-0.03409 ; wipe and retract
G1 X111.724 Y115.455 E-0.05871 ; wipe and retract
G1 X111.844 Y115.408 E-0.03394 ; wipe and retract
;WIPE_END
G1 E-1.65897 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X114.410 Y115.697 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.399 Y115.561 E0.00633 ; perimeter
G1 X114.422 Y115.410 E0.00709 ; perimeter
G1 X114.470 Y115.315 E0.00492 ; perimeter
G1 X114.840 Y114.929 E0.02479 ; perimeter
G1 X115.055 Y114.544 E0.02043 ; perimeter
G1 X115.085 Y114.167 E0.01751 ; perimeter
G1 X115.176 Y113.853 E0.01513 ; perimeter
G1 X115.202 Y113.681 E0.00805 ; perimeter
G1 X115.360 Y113.292 E0.01946 ; perimeter
G1 X115.226 Y112.852 E0.02132 ; perimeter
G1 X115.124 Y112.629 E0.01136 ; perimeter
G1 X115.130 Y112.441 E0.00872 ; perimeter
G1 X115.176 Y112.202 E0.01125 ; perimeter
G1 X115.296 Y112.060 E0.00860 ; perimeter
G1 X115.455 Y111.995 E0.00797 ; perimeter
G1 X115.701 Y112.041 E0.01162 ; perimeter
G1 X115.788 Y112.104 E0.00494 ; perimeter
G1 X115.868 Y112.238 E0.00723 ; perimeter
G1 X115.895 Y112.485 E0.01153 ; perimeter
G1 X115.892 Y112.737 E0.01165 ; perimeter
G1 X115.826 Y112.876 E0.00715 ; perimeter
G1 X115.729 Y113.169 E0.01429 ; perimeter
G1 X115.790 Y113.725 E0.02593 ; perimeter
G1 X115.848 Y113.986 E0.01235 ; perimeter
G1 X115.862 Y114.404 E0.01938 ; perimeter
G1 X115.849 Y114.853 E0.02082 ; perimeter
G1 X115.797 Y115.065 E0.01011 ; perimeter
G1 X115.760 Y115.134 E0.00361 ; perimeter
G1 X115.316 Y115.557 E0.02839 ; perimeter
G1 X115.117 Y115.823 E0.01543 ; perimeter
G1 X115.019 Y115.905 E0.00588 ; perimeter
G1 X114.869 Y115.978 E0.00776 ; perimeter
G1 X114.783 Y115.991 E0.00400 ; perimeter
G1 X114.626 Y115.947 E0.00755 ; perimeter
G1 X114.501 Y115.870 E0.00680 ; perimeter
G1 X114.432 Y115.753 E0.00629 ; perimeter
G1 X114.504 Y115.598 F10800.000 ; move inwards before travel
G1 X114.660 Y115.674 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.277024
G1 F2400.000
G1 X114.718 Y115.638 E0.00133 ; infill
;WIDTH:0.306411
G1 X114.776 Y115.602 E0.00150 ; infill
;WIDTH:0.323285
G1 X114.784 Y115.595 E0.00024 ; infill
;WIDTH:0.339211
G1 X115.034 Y115.289 E0.00972 ; infill
;WIDTH:0.352119
G1 X115.171 Y115.149 E0.00504 ; infill
;WIDTH:0.386613
G1 X115.241 Y115.058 E0.00330 ; infill
;WIDTH:0.421106
G1 X115.312 Y114.967 E0.00363 ; infill
;WIDTH:0.4556
G1 X115.383 Y114.875 E0.00396 ; infill
G1 X115.617 Y114.279 E0.02197 ; infill
G1 X115.540 Y113.657 F10800.000 ; move to first infill point
;WIDTH:0.303336
G1 F2400.000
G1 X115.504 Y113.947 E0.00632 ; infill
;WIDTH:0.336019
G1 X115.469 Y114.237 E0.00712 ; infill
;WIDTH:0.355173
G1 X115.465 Y114.405 E0.00436 ; infill
;WIDTH:0.366094
G1 X115.453 Y114.628 E0.00602 ; infill
;WIDTH:0.38517
G1 X115.361 Y115.181 E0.01594 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.453 Y114.628 E-0.14778 ; wipe and retract
;WIPE_END
G1 E-2.25222 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X115.521 Y112.950 ; move to first infill point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.201419
G1 F2400.000
G1 X115.530 Y112.752 E0.00262 ; infill
;WIDTH:0.214548
G1 X115.531 Y112.734 E0.00026 ; infill
;WIDTH:0.230567
G1 X115.543 Y112.264 E0.00733 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.531 Y112.734 E-0.12396 ; wipe and retract
;WIPE_END
G1 E-2.27604 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 X115.669 Y105.582 ; move to first perimeter point
G1 Z15.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.528 Y105.608 E0.00666 ; perimeter
G1 X115.394 Y105.597 E0.00620 ; perimeter
G1 X115.297 Y105.555 E0.00490 ; perimeter
G1 X115.172 Y105.407 E0.00897 ; perimeter
G1 X115.131 Y105.210 E0.00932 ; perimeter
G1 X115.148 Y105.069 E0.00658 ; perimeter
G1 X115.216 Y104.931 E0.00713 ; perimeter
G1 X115.299 Y104.861 E0.00502 ; perimeter
G1 X115.408 Y104.812 E0.00552 ; perimeter
G1 X115.540 Y104.805 E0.00612 ; perimeter
G1 X115.630 Y104.832 E0.00437 ; perimeter
G1 X115.789 Y104.918 E0.00835 ; perimeter
G1 X115.855 Y104.997 E0.00479 ; perimeter
G1 X115.896 Y105.209 E0.00999 ; perimeter
G1 X115.854 Y105.423 E0.01008 ; perimeter
G1 X115.813 Y105.489 E0.00360 ; perimeter
G1 X115.723 Y105.556 E0.00520 ; perimeter
G1 X115.558 Y105.491 F10800.000 ; move inwards before travel
G1 X115.513 Y105.204 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314215
G1 F2400.000
G1 X115.497 Y105.172 E0.00081 ; infill
;WIDTH:0.277832
G1 X115.491 Y105.153 E0.00038 ; infill
;LAYER_CHANGE
;Z:16
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;16
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.497 Y105.172 E-0.00513 ; wipe and retract
;WIPE_END
G1 E-2.39487 F2400.000 ; retract
G1 Z15.875 F10800.000 ; lift Z
G1 Z16.000 ; move to next layer (79)
;AFTER_LAYER_CHANGE
;16
G1 Z16.075 ; lift Z
G1 X111.700 Y98.726 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X111.628 Y98.527 E0.00716 ; perimeter
G1 X111.589 Y98.273 E0.00870 ; perimeter
G1 X111.689 Y98.667 E0.01375 ; perimeter
G1 X110.494 Y97.367 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.137 Y97.371 E0.01653 ; perimeter
G1 X109.641 Y97.335 E0.02303 ; perimeter
G1 X108.982 Y97.091 E0.03256 ; perimeter
G1 X108.644 Y96.867 E0.01879 ; perimeter
G1 X107.851 Y96.404 E0.04251 ; perimeter
G1 X107.534 Y96.313 E0.01530 ; perimeter
G1 X107.212 Y96.193 E0.01589 ; perimeter
G1 X106.969 Y95.999 E0.01443 ; perimeter
G1 X106.771 Y95.781 E0.01365 ; perimeter
G1 X106.731 Y95.644 E0.00661 ; perimeter
G1 X106.413 Y95.429 E0.01778 ; perimeter
G1 X106.371 Y95.278 E0.00725 ; perimeter
G1 X106.273 Y95.239 E0.00491 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.827 Y95.062 E0.02003 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.537 Y94.903 E0.01532 ; perimeter
G1 X105.315 Y94.940 E0.01044 ; perimeter
G1 X105.003 Y94.891 E0.01463 ; perimeter
G1 X104.762 Y94.930 E0.01132 ; perimeter
G1 X104.658 Y94.928 E0.00481 ; perimeter
G1 X104.212 Y94.860 E0.02086 ; perimeter
G1 X103.947 Y94.726 E0.01375 ; perimeter
G1 X103.886 Y94.666 E0.00399 ; perimeter
G1 X103.778 Y94.628 E0.00530 ; perimeter
G1 X103.734 Y94.438 E0.00904 ; perimeter
G1 X103.680 Y94.435 E0.00247 ; perimeter
G1 X103.756 Y94.334 E0.00586 ; perimeter
G1 X104.201 Y94.118 E0.02290 ; perimeter
G1 X104.485 Y94.079 E0.01326 ; perimeter
G1 X104.852 Y94.113 E0.01710 ; perimeter
G1 X105.137 Y94.224 E0.01418 ; perimeter
G1 X105.941 Y94.722 E0.04378 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.224 Y94.879 E0.01353 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.364 Y94.956 E0.00743 ; perimeter
G1 X107.133 Y95.231 E0.03782 ; perimeter
G1 X107.229 Y95.248 E0.00450 ; perimeter
G1 X107.554 Y95.423 E0.01713 ; perimeter
G1 X107.783 Y95.668 E0.01553 ; perimeter
G1 X108.007 Y96.027 E0.01958 ; perimeter
G1 X108.249 Y96.160 E0.01280 ; perimeter
G1 X108.592 Y96.277 E0.01679 ; perimeter
G1 X108.859 Y96.295 E0.01239 ; perimeter
G1 X109.005 Y96.339 E0.00708 ; perimeter
G1 X109.437 Y96.401 E0.02022 ; perimeter
G1 X109.830 Y96.487 E0.01863 ; perimeter
G1 X110.151 Y96.615 E0.01599 ; perimeter
G1 X110.308 Y96.801 E0.01127 ; perimeter
G1 X110.472 Y96.896 E0.00877 ; perimeter
G1 X110.570 Y97.049 E0.00843 ; perimeter
G1 X110.970 Y97.170 E0.01935 ; perimeter
G1 X111.164 Y97.170 E0.00900 ; perimeter
G1 X111.486 Y97.227 E0.01515 ; perimeter
G1 X111.576 Y97.266 E0.00452 ; perimeter
G1 X111.775 Y97.449 E0.01256 ; perimeter
G1 X111.941 Y97.766 E0.01659 ; perimeter
G1 X112.134 Y98.415 E0.03133 ; perimeter
G1 X112.197 Y98.766 E0.01655 ; perimeter
G1 X112.341 Y99.082 E0.01606 ; perimeter
G1 X112.630 Y99.602 E0.02757 ; perimeter
G1 X112.835 Y99.860 E0.01528 ; perimeter
G1 X113.215 Y100.181 E0.02304 ; perimeter
G1 X113.362 Y100.340 E0.01002 ; perimeter
G1 X113.487 Y100.517 E0.01003 ; perimeter
G1 X113.498 Y100.831 E0.01454 ; perimeter
G1 X113.422 Y101.025 E0.00964 ; perimeter
G1 X113.251 Y101.168 E0.01035 ; perimeter
G1 X113.123 Y101.216 E0.00635 ; perimeter
G1 X112.985 Y101.206 E0.00638 ; perimeter
G1 X112.823 Y101.100 E0.00896 ; perimeter
G1 X112.667 Y100.904 E0.01162 ; perimeter
G1 X112.146 Y100.150 E0.04246 ; perimeter
G1 X111.483 Y99.284 E0.05050 ; perimeter
G1 X111.248 Y98.902 E0.02077 ; perimeter
G1 X111.157 Y98.637 E0.01299 ; perimeter
G1 X111.094 Y98.219 E0.01956 ; perimeter
G1 X110.956 Y97.896 E0.01627 ; perimeter
G1 X110.881 Y97.772 E0.00672 ; perimeter
G1 X110.831 Y97.614 E0.00770 ; perimeter
G1 X110.542 Y97.403 E0.01656 ; perimeter
G1 X110.402 Y97.023 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.137 Y97.371 E-0.10729 ; wipe and retract
G1 X109.641 Y97.335 E-0.13118 ; wipe and retract
G1 X108.982 Y97.091 E-0.18549 ; wipe and retract
G1 X108.644 Y96.867 E-0.10702 ; wipe and retract
G1 X107.851 Y96.404 E-0.24219 ; wipe and retract
G1 X107.534 Y96.313 E-0.08715 ; wipe and retract
G1 X107.212 Y96.193 E-0.09051 ; wipe and retract
G1 X106.969 Y95.999 E-0.08219 ; wipe and retract
G1 X106.771 Y95.781 E-0.07778 ; wipe and retract
G1 X106.731 Y95.644 E-0.03767 ; wipe and retract
G1 X106.413 Y95.429 E-0.10130 ; wipe and retract
G1 X106.371 Y95.278 E-0.04130 ; wipe and retract
G1 X106.273 Y95.239 E-0.02795 ; wipe and retract
;WIPE_END
G1 E-1.08099 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X102.911 Y94.503 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.054 Y94.511 E0.00663 ; perimeter
G1 X102.703 Y94.791 E0.02084 ; perimeter
G1 X102.527 Y94.879 E0.00908 ; perimeter
G1 X102.219 Y94.987 E0.01515 ; perimeter
G1 X101.541 Y95.172 E0.03255 ; perimeter
G1 X100.980 Y95.237 E0.02616 ; perimeter
G1 X100.466 Y95.328 E0.02415 ; perimeter
G1 X100.154 Y95.481 E0.01608 ; perimeter
G1 X99.957 Y95.708 E0.01394 ; perimeter
G1 X99.459 Y96.502 E0.04342 ; perimeter
G1 X99.488 Y96.625 E0.00589 ; perimeter
G1 X99.411 Y97.154 E0.02475 ; perimeter
G1 X99.425 Y97.228 E0.00348 ; perimeter
G1 X99.393 Y97.526 E0.01391 ; perimeter
G1 X99.208 Y98.442 E0.04326 ; perimeter
G1 X99.194 Y99.527 E0.05026 ; perimeter
G1 X99.274 Y99.675 E0.00781 ; perimeter
G1 X99.315 Y100.137 E0.02147 ; perimeter
G1 X99.287 Y100.342 E0.00958 ; perimeter
G1 X99.186 Y100.532 E0.00997 ; perimeter
G1 X99.114 Y100.585 E0.00413 ; perimeter
G1 X99.068 Y100.702 E0.00581 ; perimeter
G1 X99.026 Y100.713 E0.00203 ; perimeter
G1 X98.851 Y100.666 E0.00838 ; perimeter
G1 X98.797 Y100.594 E0.00417 ; perimeter
G1 X98.625 Y100.462 E0.01000 ; perimeter
G1 X98.551 Y100.311 E0.00781 ; perimeter
G1 X98.523 Y100.081 E0.01073 ; perimeter
G1 X98.524 Y99.818 E0.01218 ; perimeter
G1 X98.566 Y99.594 E0.01055 ; perimeter
G1 X98.658 Y99.339 E0.01258 ; perimeter
G1 X98.705 Y98.827 E0.02381 ; perimeter
G1 X98.747 Y98.590 E0.01114 ; perimeter
G1 X98.790 Y97.889 E0.03255 ; perimeter
G1 X98.673 Y97.308 E0.02741 ; perimeter
G1 X98.640 Y96.749 E0.02598 ; perimeter
G1 X98.719 Y96.335 E0.01952 ; perimeter
G1 X99.371 Y95.483 E0.04969 ; perimeter
G1 X99.635 Y95.179 E0.01865 ; perimeter
G1 X100.003 Y94.796 E0.02459 ; perimeter
G1 X100.277 Y94.633 E0.01479 ; perimeter
G1 X100.770 Y94.472 E0.02406 ; perimeter
G1 X101.077 Y94.401 E0.01459 ; perimeter
G1 X101.624 Y94.313 E0.02566 ; perimeter
G1 X102.184 Y94.287 E0.02593 ; perimeter
G1 X102.707 Y94.366 E0.02451 ; perimeter
G1 X102.861 Y94.470 E0.00863 ; perimeter
G1 X102.966 Y94.636 F10800.000 ; move inwards before travel
G1 X102.480 Y94.576 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273067
G1 F2400.000
G1 X101.890 Y94.682 E0.01149 ; infill
;WIDTH:0.371862
G1 X100.927 Y94.843 E0.02671 ; infill
;WIDTH:0.354787
G1 X100.652 Y94.910 E0.00732 ; infill
;WIDTH:0.32003
G1 X100.428 Y94.966 E0.00532 ; infill
;WIDTH:0.288097
G1 X100.371 Y94.987 E0.00124 ; infill
;WIDTH:0.266264
G1 X100.218 Y95.068 E0.00321 ; infill
;WIDTH:0.247383
G1 X100.139 Y95.125 E0.00165 ; infill
;WIDTH:0.213454
G1 X100.061 Y95.182 E0.00138 ; infill
;WIDTH:0.179526
G1 X99.982 Y95.239 E0.00111 ; infill
;WIDTH:0.145599
G1 X99.717 Y95.535 E0.00339 ; infill
G1 X99.360 Y96.040 E0.00528 ; infill
;WIDTH:0.261023
G1 X99.109 Y96.401 E0.00797 ; infill
G1 X99.072 Y96.489 E0.00174 ; infill
G1 X98.910 Y97.240 E0.01393 ; infill
G1 X99.073 Y97.874 F10800.000 ; move to first infill point
;WIDTH:0.277487
G1 F2400.000
G1 X99.059 Y97.567 E0.00599 ; infill
;WIDTH:0.305925
G1 X99.036 Y97.142 E0.00932 ; infill
;WIDTH:0.343146
G1 X99.044 Y96.958 E0.00458 ; infill
;WIDTH:0.380368
G1 X99.052 Y96.775 E0.00514 ; infill
G1 X99.155 Y96.161 E0.01747 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.052 Y96.775 E-0.16431 ; wipe and retract
G1 X99.044 Y96.958 E-0.04838 ; wipe and retract
;WIPE_END
G1 E-2.18731 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X98.855 Y100.335 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.102776
G1 F2400.000
G1 X98.891 Y99.585 E0.00374 ; infill
G1 X98.930 Y99.293 E0.00147 ; infill
G1 X98.934 Y99.293 F10800.000 ; move to first infill point
;WIDTH:0.313156
G1 F2400.000
G1 X98.906 Y99.854 E0.01262 ; infill
G1 X98.921 Y100.201 E0.00780 ; infill
G1 X98.990 Y100.377 E0.00425 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.921 Y100.201 E-0.04990 ; wipe and retract
G1 X98.906 Y99.854 E-0.09160 ; wipe and retract
G1 X98.934 Y99.293 E-0.14820 ; wipe and retract
;WIPE_END
G1 E-2.11031 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X105.135 Y94.503 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.386434
G1 F2400.000
G1 X104.732 Y94.516 E0.01149 ; infill
G1 X104.495 Y94.490 E0.00683 ; infill
;WIDTH:0.377363
G1 X104.331 Y94.489 E0.00456 ; infill
;WIDTH:0.33047
G1 X104.079 Y94.447 E0.00610 ; infill
G1 X104.198 Y94.390 F10800.000 ; move to first infill point
;WIDTH:0.259441
G1 F2400.000
G1 X105.018 Y94.549 E0.01504 ; infill
;WIDTH:0.162391
G1 X105.391 Y94.683 E0.00394 ; infill
G1 X106.896 Y95.402 F10800.000 ; move to first infill point
;WIDTH:0.23085
G1 F2400.000
G1 X107.583 Y96.074 E0.01502 ; infill
G1 X107.692 Y96.107 F10800.000 ; move to first infill point
;WIDTH:0.37154
G1 F2400.000
G1 X107.244 Y95.706 E0.01645 ; infill
;WIDTH:0.361371
G1 X107.169 Y95.649 E0.00248 ; infill
;WIDTH:0.328743
G1 X107.110 Y95.603 E0.00178 ; infill
;WIDTH:0.301865
G1 X106.944 Y95.512 E0.00408 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.110 Y95.603 E-0.04997 ; wipe and retract
;WIPE_END
G1 E-2.35003 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X108.709 Y96.626 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.354094
G1 F2400.000
G1 X109.037 Y96.715 E0.00878 ; infill
;WIDTH:0.37953
G1 X109.364 Y96.804 E0.00950 ; infill
;WIDTH:0.393951
G1 X110.205 Y97.019 E0.02533 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.364 Y96.804 E-0.22905 ; wipe and retract
;WIPE_END
G1 E-2.17095 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X111.790 Y98.950 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.411335
G1 F2400.000
G1 X111.976 Y99.259 E0.01104 ; infill
;WIDTH:0.280786
G1 X112.439 Y99.940 E0.01629 ; infill
;WIDTH:0.29905
G1 X112.579 Y100.127 E0.00497 ; infill
;WIDTH:0.343067
G1 X112.691 Y100.250 E0.00415 ; infill
;WIDTH:0.387082
G1 X112.803 Y100.373 E0.00476 ; infill
;WIDTH:0.431098
G1 X112.914 Y100.497 E0.00537 ; infill
;WIDTH:0.454122
G1 X113.212 Y100.887 E0.01678 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.914 Y100.497 E-0.12947 ; wipe and retract
;WIPE_END
G1 E-2.27053 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X100.156 Y102.558 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.168 Y102.664 E0.00492 ; perimeter
G1 X100.141 Y102.901 E0.01107 ; perimeter
G1 X100.080 Y103.014 E0.00594 ; perimeter
G1 X99.948 Y103.079 E0.00680 ; perimeter
G1 X99.758 Y103.083 E0.00884 ; perimeter
G1 X99.557 Y103.038 E0.00954 ; perimeter
G1 X99.487 Y102.992 E0.00387 ; perimeter
G1 X99.394 Y102.874 E0.00699 ; perimeter
G1 X99.328 Y102.712 E0.00809 ; perimeter
G1 X99.280 Y102.422 E0.01362 ; perimeter
G1 X99.342 Y102.228 E0.00942 ; perimeter
G1 X99.332 Y102.137 E0.00426 ; perimeter
G1 X99.449 Y102.030 E0.00737 ; perimeter
G1 X99.647 Y102.020 E0.00917 ; perimeter
G1 X99.926 Y102.238 E0.01636 ; perimeter
G1 X100.121 Y102.509 E0.01550 ; perimeter
G1 X100.086 Y102.638 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.168 Y102.664 E-0.04258 ; wipe and retract
G1 X100.141 Y102.901 E-0.06305 ; wipe and retract
G1 X100.080 Y103.014 E-0.03382 ; wipe and retract
G1 X99.948 Y103.079 E-0.03871 ; wipe and retract
G1 X99.758 Y103.083 E-0.05034 ; wipe and retract
G1 X99.557 Y103.038 E-0.05434 ; wipe and retract
G1 X99.487 Y102.992 E-0.02204 ; wipe and retract
G1 X99.394 Y102.874 E-0.03980 ; wipe and retract
G1 X99.328 Y102.712 E-0.04608 ; wipe and retract
G1 X99.280 Y102.422 E-0.07762 ; wipe and retract
G1 X99.342 Y102.228 E-0.05369 ; wipe and retract
G1 X99.332 Y102.137 E-0.02425 ; wipe and retract
G1 X99.449 Y102.030 E-0.04201 ; wipe and retract
G1 X99.647 Y102.020 E-0.05227 ; wipe and retract
G1 X99.926 Y102.238 E-0.09318 ; wipe and retract
G1 X100.121 Y102.509 E-0.08830 ; wipe and retract
;WIPE_END
G1 E-1.57790 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X102.957 Y107.028 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.304 Y107.231 E0.01363 ; perimeter
G1 X103.256 Y107.349 E0.00431 ; perimeter
G1 X103.236 Y107.354 E0.00070 ; perimeter
G1 X103.152 Y107.288 E0.00362 ; perimeter
G1 X102.986 Y107.081 E0.00900 ; perimeter
G1 X103.139 Y107.846 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.979 Y107.765 E0.00832 ; perimeter
G1 X102.812 Y107.634 E0.00982 ; perimeter
G1 X102.589 Y107.360 E0.01636 ; perimeter
G1 X102.469 Y107.143 E0.01150 ; perimeter
G1 X101.926 Y106.572 E0.03648 ; perimeter
G1 X101.616 Y106.347 E0.01773 ; perimeter
G1 X101.476 Y106.281 E0.00720 ; perimeter
G1 X101.174 Y105.934 E0.02130 ; perimeter
G1 X101.028 Y105.618 E0.01613 ; perimeter
G1 X100.965 Y105.339 E0.01325 ; perimeter
G1 X100.960 Y105.153 E0.00862 ; perimeter
G1 X101.068 Y104.902 E0.01262 ; perimeter
G1 X101.152 Y104.825 E0.00529 ; perimeter
G1 X101.348 Y104.794 E0.00919 ; perimeter
G1 X101.533 Y104.883 E0.00951 ; perimeter
G1 X101.775 Y105.102 E0.01515 ; perimeter
G1 X102.097 Y105.675 E0.03042 ; perimeter
G1 X102.445 Y106.085 E0.02493 ; perimeter
G1 X102.821 Y106.378 E0.02207 ; perimeter
G1 X103.416 Y106.745 E0.03238 ; perimeter
G1 X103.495 Y106.776 E0.00396 ; perimeter
G1 X103.813 Y106.998 E0.01797 ; perimeter
G1 X103.850 Y107.172 E0.00821 ; perimeter
G1 X103.842 Y107.342 E0.00790 ; perimeter
G1 X103.719 Y107.491 E0.00896 ; perimeter
G1 X103.643 Y107.674 E0.00915 ; perimeter
G1 X103.533 Y107.773 E0.00685 ; perimeter
G1 X103.240 Y107.859 E0.01416 ; perimeter
G1 X103.199 Y107.853 E0.00192 ; perimeter
G1 X103.090 Y107.673 F10800.000 ; move inwards before travel
G1 X102.786 Y106.857 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.371572
G1 F2400.000
G1 X102.602 Y106.708 E0.00649 ; infill
;WIDTH:0.353172
G1 X102.398 Y106.524 E0.00708 ; infill
;WIDTH:0.311199
G1 X102.207 Y106.351 E0.00575 ; infill
;WIDTH:0.272583
G1 X101.943 Y106.100 E0.00694 ; infill
;WIDTH:0.37893
G1 X101.251 Y105.508 E0.02547 ; infill
G1 X101.504 Y105.960 F10800.000 ; move to first infill point
;WIDTH:0.323597
G1 F2400.000
G1 X101.404 Y105.503 E0.01093 ; infill
;WIDTH:0.293451
G1 X101.304 Y105.045 E0.00976 ; infill
G1 X101.312 Y105.044 F10800.000 ; move to first infill point
;WIDTH:0.433234
G1 F2400.000
G1 X101.456 Y105.473 E0.01469 ; infill
G1 X101.570 Y105.692 E0.00801 ; infill
G1 X101.755 Y105.937 E0.00998 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.570 Y105.692 E-0.08115 ; wipe and retract
G1 X101.456 Y105.473 E-0.06511 ; wipe and retract
G1 X101.312 Y105.044 E-0.11947 ; wipe and retract
;WIPE_END
G1 E-2.13427 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X107.431 Y110.118 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.452 Y110.023 E0.00452 ; perimeter
G1 X107.592 Y109.764 E0.01363 ; perimeter
G1 X107.745 Y109.689 E0.00789 ; perimeter
G1 X107.970 Y109.724 E0.01056 ; perimeter
G1 X108.163 Y109.860 E0.01096 ; perimeter
G1 X109.114 Y111.126 E0.07334 ; perimeter
G1 X109.600 Y111.837 E0.03986 ; perimeter
G1 X109.981 Y112.468 E0.03417 ; perimeter
G1 X110.035 Y112.670 E0.00967 ; perimeter
G1 X109.991 Y112.917 E0.01165 ; perimeter
G1 X109.840 Y113.125 E0.01189 ; perimeter
G1 X109.705 Y113.206 E0.00729 ; perimeter
G1 X109.541 Y113.236 E0.00776 ; perimeter
G1 X109.401 Y113.219 E0.00654 ; perimeter
G1 X109.285 Y113.152 E0.00616 ; perimeter
G1 X109.136 Y112.907 E0.01332 ; perimeter
G1 X109.033 Y112.372 E0.02524 ; perimeter
G1 X108.865 Y112.057 E0.01652 ; perimeter
G1 X108.142 Y111.117 E0.05493 ; perimeter
G1 X107.605 Y110.525 E0.03704 ; perimeter
G1 X107.456 Y110.277 E0.01338 ; perimeter
G1 X107.431 Y110.177 E0.00477 ; perimeter
G1 X107.516 Y110.070 F10800.000 ; move inwards before travel
G1 X107.738 Y110.019 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.390288
G1 F2400.000
G1 X107.871 Y110.162 E0.00563 ; infill
;WIDTH:0.403875
G1 X108.190 Y110.568 E0.01551 ; infill
;WIDTH:0.291327
G1 X108.442 Y110.874 E0.00818 ; infill
G1 X109.178 Y111.867 E0.02554 ; infill
;WIDTH:0.313721
G1 X109.283 Y112.041 E0.00456 ; infill
;WIDTH:0.331061
G1 X109.399 Y112.250 E0.00573 ; infill
;WIDTH:0.371556
G1 X109.452 Y112.375 E0.00372 ; infill
;WIDTH:0.412049
G1 X109.504 Y112.501 E0.00418 ; infill
;WIDTH:0.439182
G1 X109.653 Y112.956 E0.01578 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.504 Y112.501 E-0.12639 ; wipe and retract
;WIPE_END
G1 E-2.27361 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X108.172 Y110.791 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.251839
G1 F2400.000
G1 X107.995 Y110.399 E0.00748 ; infill
;WIDTH:0.207586
G1 X107.817 Y110.006 E0.00590 ; infill
;WIDTH:0.163332
G1 X107.784 Y109.940 E0.00075 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.817 Y110.006 E-0.01964 ; wipe and retract
;WIPE_END
G1 E-2.38036 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X111.769 Y115.514 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.828 Y115.456 E0.00386 ; perimeter
G1 X112.074 Y115.371 E0.01206 ; perimeter
G1 X112.242 Y115.374 E0.00777 ; perimeter
G1 X112.491 Y115.453 E0.01210 ; perimeter
G1 X112.554 Y115.504 E0.00373 ; perimeter
G1 X112.637 Y115.650 E0.00778 ; perimeter
G1 X112.654 Y115.768 E0.00556 ; perimeter
G1 X112.601 Y115.948 E0.00868 ; perimeter
G1 X112.505 Y116.060 E0.00683 ; perimeter
G1 X112.401 Y116.119 E0.00554 ; perimeter
G1 X112.220 Y116.156 E0.00854 ; perimeter
G1 X112.039 Y116.150 E0.00838 ; perimeter
G1 X111.889 Y116.105 E0.00726 ; perimeter
G1 X111.819 Y116.062 E0.00379 ; perimeter
G1 X111.716 Y115.917 E0.00824 ; perimeter
G1 X111.681 Y115.757 E0.00761 ; perimeter
G1 X111.700 Y115.636 E0.00566 ; perimeter
G1 X111.739 Y115.566 E0.00372 ; perimeter
G1 X111.852 Y115.524 F10800.000 ; move inwards before travel
G1 X112.109 Y115.762 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.271334
G1 F2400.000
G1 X112.069 Y115.765 E0.00075 ; infill
G1 X112.031 Y115.800 E0.00099 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.069 Y115.765 E-0.01371 ; wipe and retract
G1 X112.109 Y115.762 E-0.01047 ; wipe and retract
;WIPE_END
G1 E-2.37582 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X115.167 Y112.656 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.129 Y112.513 E0.00688 ; perimeter
G1 X115.174 Y112.165 E0.01625 ; perimeter
G1 X115.266 Y112.025 E0.00776 ; perimeter
G1 X115.435 Y111.945 E0.00866 ; perimeter
G1 X115.511 Y111.937 E0.00354 ; perimeter
G1 X115.707 Y111.995 E0.00949 ; perimeter
G1 X115.797 Y112.064 E0.00525 ; perimeter
G1 X115.867 Y112.193 E0.00680 ; perimeter
G1 X115.890 Y112.553 E0.01669 ; perimeter
G1 X115.779 Y112.812 E0.01304 ; perimeter
G1 X115.498 Y112.970 E0.01496 ; perimeter
G1 X115.454 Y112.948 E0.00229 ; perimeter
G1 X115.421 Y112.848 E0.00486 ; perimeter
G1 X115.241 Y112.782 E0.00887 ; perimeter
G1 X115.198 Y112.708 E0.00398 ; perimeter
G1 X115.247 Y112.531 F10800.000 ; move inwards before travel
G1 X115.535 Y113.483 ; move to first perimeter point
G1 F1800.000
G1 X115.755 Y113.892 E0.02151 ; perimeter
G1 X115.847 Y114.291 E0.01895 ; perimeter
G1 X115.861 Y114.659 E0.01706 ; perimeter
G1 X115.826 Y114.979 E0.01492 ; perimeter
G1 X115.754 Y115.137 E0.00802 ; perimeter
G1 X115.308 Y115.565 E0.02865 ; perimeter
G1 X115.118 Y115.827 E0.01500 ; perimeter
G1 X115.038 Y115.896 E0.00487 ; perimeter
G1 X114.874 Y115.975 E0.00844 ; perimeter
G1 X114.789 Y115.988 E0.00401 ; perimeter
G1 X114.631 Y115.944 E0.00759 ; perimeter
G1 X114.502 Y115.866 E0.00700 ; perimeter
G1 X114.462 Y115.816 E0.00293 ; perimeter
G1 X114.415 Y115.695 E0.00603 ; perimeter
G1 X114.403 Y115.570 E0.00582 ; perimeter
G1 X114.424 Y115.411 E0.00744 ; perimeter
G1 X114.473 Y115.318 E0.00483 ; perimeter
G1 X114.849 Y114.924 E0.02525 ; perimeter
G1 X115.077 Y114.512 E0.02181 ; perimeter
G1 X115.092 Y114.326 E0.00862 ; perimeter
G1 X115.169 Y114.061 E0.01281 ; perimeter
G1 X115.315 Y113.704 E0.01785 ; perimeter
G1 X115.425 Y113.557 E0.00851 ; perimeter
G1 X115.485 Y113.517 E0.00334 ; perimeter
G1 X115.562 Y113.882 F10800.000 ; move inwards before travel
G1 X115.520 Y113.979 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323754
G1 F2400.000
G1 X115.469 Y114.396 E0.00980 ; infill
;WIDTH:0.347142
G1 X115.465 Y114.595 E0.00504 ; infill
;WIDTH:0.368955
G1 X115.299 Y115.228 E0.01773 ; infill
G1 X114.664 Y115.671 F10800.000 ; move to first infill point
;WIDTH:0.278153
G1 F2400.000
G1 X114.722 Y115.635 E0.00133 ; infill
;WIDTH:0.305548
G1 X114.780 Y115.599 E0.00149 ; infill
;WIDTH:0.32681
G1 X114.790 Y115.591 E0.00031 ; infill
;WIDTH:0.341935
G1 X115.176 Y115.140 E0.01475 ; infill
;WIDTH:0.381267
G1 X115.263 Y115.022 E0.00415 ; infill
;WIDTH:0.415476
G1 X115.326 Y114.944 E0.00310 ; infill
;WIDTH:0.447408
G1 X115.402 Y114.841 E0.00430 ; infill
G1 X115.602 Y114.302 E0.01934 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.402 Y114.841 E-0.15172 ; wipe and retract
G1 X115.326 Y114.944 E-0.03377 ; wipe and retract
;WIPE_END
G1 E-2.21451 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 X115.386 Y105.571 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.283 Y105.530 E0.00510 ; perimeter
G1 X115.182 Y105.409 E0.00731 ; perimeter
G1 X115.130 Y105.207 E0.00966 ; perimeter
G1 X115.143 Y105.063 E0.00670 ; perimeter
G1 X115.217 Y104.913 E0.00774 ; perimeter
G1 X115.334 Y104.819 E0.00695 ; perimeter
G1 X115.393 Y104.793 E0.00299 ; perimeter
G1 X115.528 Y104.777 E0.00630 ; perimeter
G1 X115.672 Y104.820 E0.00694 ; perimeter
G1 X115.785 Y104.886 E0.00603 ; perimeter
G1 X115.850 Y104.966 E0.00481 ; perimeter
G1 X115.882 Y105.053 E0.00429 ; perimeter
G1 X115.896 Y105.198 E0.00678 ; perimeter
G1 X115.851 Y105.409 E0.00996 ; perimeter
G1 X115.766 Y105.513 E0.00624 ; perimeter
G1 X115.657 Y105.564 E0.00559 ; perimeter
G1 X115.446 Y105.575 E0.00981 ; perimeter
G1 X115.351 Y105.466 F10800.000 ; move inwards before travel
G1 X115.513 Y105.168 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31917
G1 F2400.000
G1 X115.511 Y105.203 E0.00082 ; infill
;LAYER_CHANGE
;Z:16.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;16.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.513 Y105.168 E-0.00940 ; wipe and retract
;WIPE_END
G1 E-2.39060 F2400.000 ; retract
G1 Z16.075 F10800.000 ; lift Z
G1 Z16.200 ; move to next layer (80)
;AFTER_LAYER_CHANGE
;16.2
G1 X115.849 Y105.395 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.752 Y105.504 E0.00676 ; perimeter
G1 X115.643 Y105.549 E0.00545 ; perimeter
G1 X115.549 Y105.561 E0.00438 ; perimeter
G1 X115.375 Y105.546 E0.00813 ; perimeter
G1 X115.295 Y105.517 E0.00390 ; perimeter
G1 X115.192 Y105.408 E0.00696 ; perimeter
G1 X115.129 Y105.204 E0.00992 ; perimeter
G1 X115.138 Y105.057 E0.00682 ; perimeter
G1 X115.218 Y104.894 E0.00840 ; perimeter
G1 X115.377 Y104.774 E0.00923 ; perimeter
G1 X115.555 Y104.758 E0.00829 ; perimeter
G1 X115.695 Y104.803 E0.00681 ; perimeter
G1 X115.790 Y104.863 E0.00520 ; perimeter
G1 X115.846 Y104.933 E0.00415 ; perimeter
G1 X115.886 Y105.044 E0.00546 ; perimeter
G1 X115.897 Y105.191 E0.00681 ; perimeter
G1 X115.863 Y105.337 E0.00694 ; perimeter
G1 X115.703 Y105.395 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.752 Y105.504 E-0.05292 ; wipe and retract
G1 X115.643 Y105.549 E-0.03103 ; wipe and retract
G1 X115.549 Y105.561 E-0.02495 ; wipe and retract
G1 X115.375 Y105.546 E-0.04629 ; wipe and retract
G1 X115.295 Y105.517 E-0.02223 ; wipe and retract
G1 X115.192 Y105.408 E-0.03963 ; wipe and retract
G1 X115.129 Y105.204 E-0.05651 ; wipe and retract
G1 X115.138 Y105.057 E-0.03886 ; wipe and retract
G1 X115.218 Y104.894 E-0.04787 ; wipe and retract
G1 X115.377 Y104.774 E-0.05260 ; wipe and retract
G1 X115.555 Y104.758 E-0.04722 ; wipe and retract
G1 X115.695 Y104.803 E-0.03882 ; wipe and retract
G1 X115.790 Y104.863 E-0.02960 ; wipe and retract
G1 X115.846 Y104.933 E-0.02365 ; wipe and retract
G1 X115.886 Y105.044 E-0.03113 ; wipe and retract
G1 X115.897 Y105.191 E-0.03882 ; wipe and retract
G1 X115.863 Y105.337 E-0.03955 ; wipe and retract
;WIPE_END
G1 E-1.73833 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X115.539 Y111.885 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.692 Y111.931 E0.00738 ; perimeter
G1 X115.811 Y112.028 E0.00714 ; perimeter
G1 X115.871 Y112.133 E0.00557 ; perimeter
G1 X115.890 Y112.402 E0.01251 ; perimeter
G1 X115.759 Y112.672 E0.01391 ; perimeter
G1 X115.616 Y112.782 E0.00834 ; perimeter
G1 X115.419 Y112.751 E0.00925 ; perimeter
G1 X115.242 Y112.681 E0.00881 ; perimeter
G1 X115.175 Y112.581 E0.00555 ; perimeter
G1 X115.133 Y112.376 E0.00971 ; perimeter
G1 X115.166 Y112.134 E0.01130 ; perimeter
G1 X115.229 Y112.010 E0.00646 ; perimeter
G1 X115.272 Y111.968 E0.00281 ; perimeter
G1 X115.415 Y111.896 E0.00740 ; perimeter
G1 X115.479 Y111.891 E0.00298 ; perimeter
G1 X115.605 Y112.030 F10800.000 ; move inwards before travel
G1 X115.516 Y112.257 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.286843
G1 F2400.000
G1 X115.509 Y112.246 E0.00027 ; infill
G1 X115.433 Y113.950 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.576 Y113.954 E0.00664 ; perimeter
G1 X115.720 Y114.081 E0.00889 ; perimeter
G1 X115.753 Y114.152 E0.00362 ; perimeter
G1 X115.862 Y114.626 E0.02254 ; perimeter
G1 X115.849 Y114.874 E0.01150 ; perimeter
G1 X115.798 Y115.064 E0.00911 ; perimeter
G1 X115.765 Y115.127 E0.00330 ; perimeter
G1 X115.565 Y115.297 E0.01214 ; perimeter
G1 X115.293 Y115.581 E0.01820 ; perimeter
G1 X115.244 Y115.679 E0.00507 ; perimeter
G1 X115.128 Y115.824 E0.00861 ; perimeter
G1 X115.049 Y115.892 E0.00486 ; perimeter
G1 X114.882 Y115.972 E0.00858 ; perimeter
G1 X114.792 Y115.984 E0.00417 ; perimeter
G1 X114.636 Y115.942 E0.00752 ; perimeter
G1 X114.503 Y115.861 E0.00721 ; perimeter
G1 X114.467 Y115.816 E0.00267 ; perimeter
G1 X114.419 Y115.693 E0.00611 ; perimeter
G1 X114.407 Y115.579 E0.00531 ; perimeter
G1 X114.427 Y115.412 E0.00778 ; perimeter
G1 X114.476 Y115.321 E0.00476 ; perimeter
G1 X114.855 Y114.921 E0.02553 ; perimeter
G1 X115.162 Y114.394 E0.02827 ; perimeter
G1 X115.316 Y114.046 E0.01763 ; perimeter
G1 X115.386 Y113.988 E0.00421 ; perimeter
G1 X115.540 Y114.045 F10800.000 ; move inwards before travel
G1 X115.517 Y114.252 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.279063
G1 F2400.000
G1 X115.411 Y115.112 E0.01703 ; infill
G1 X115.572 Y114.441 F10800.000 ; move to first infill point
;WIDTH:0.439549
G1 F2400.000
G1 X115.397 Y114.863 E0.01507 ; infill
G1 X115.343 Y114.928 E0.00278 ; infill
;WIDTH:0.411344
G1 X115.289 Y114.993 E0.00258 ; infill
;WIDTH:0.38314
G1 X115.177 Y115.141 E0.00527 ; infill
;WIDTH:0.338019
G1 X114.785 Y115.595 E0.01472 ; infill
;WIDTH:0.307837
G1 X114.727 Y115.632 E0.00151 ; infill
;WIDTH:0.281947
G1 X114.668 Y115.669 E0.00137 ; infill
G1 X112.746 Y115.771 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.686 Y115.965 E0.00939 ; perimeter
G1 X112.594 Y116.067 E0.00638 ; perimeter
G1 X112.499 Y116.119 E0.00500 ; perimeter
G1 X112.313 Y116.155 E0.00880 ; perimeter
G1 X112.137 Y116.149 E0.00818 ; perimeter
G1 X111.988 Y116.105 E0.00719 ; perimeter
G1 X111.917 Y116.062 E0.00382 ; perimeter
G1 X111.812 Y115.911 E0.00853 ; perimeter
G1 X111.783 Y115.774 E0.00648 ; perimeter
G1 X111.802 Y115.635 E0.00649 ; perimeter
G1 X111.865 Y115.515 E0.00630 ; perimeter
G1 X111.941 Y115.452 E0.00456 ; perimeter
G1 X112.087 Y115.388 E0.00738 ; perimeter
G1 X112.207 Y115.367 E0.00564 ; perimeter
G1 X112.367 Y115.375 E0.00741 ; perimeter
G1 X112.583 Y115.449 E0.01055 ; perimeter
G1 X112.644 Y115.498 E0.00364 ; perimeter
G1 X112.731 Y115.647 E0.00799 ; perimeter
G1 X112.738 Y115.711 E0.00299 ; perimeter
G1 X112.562 Y115.858 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.686 Y115.965 E-0.06824 ; wipe and retract
G1 X112.594 Y116.067 E-0.03634 ; wipe and retract
G1 X112.499 Y116.119 E-0.02850 ; wipe and retract
G1 X112.313 Y116.155 E-0.05015 ; wipe and retract
G1 X112.137 Y116.149 E-0.04658 ; wipe and retract
G1 X111.988 Y116.105 E-0.04097 ; wipe and retract
G1 X111.917 Y116.062 E-0.02179 ; wipe and retract
G1 X111.812 Y115.911 E-0.04861 ; wipe and retract
G1 X111.783 Y115.774 E-0.03690 ; wipe and retract
G1 X111.802 Y115.635 E-0.03696 ; wipe and retract
G1 X111.865 Y115.515 E-0.03590 ; wipe and retract
G1 X111.941 Y115.452 E-0.02600 ; wipe and retract
G1 X112.087 Y115.388 E-0.04203 ; wipe and retract
G1 X112.207 Y115.367 E-0.03215 ; wipe and retract
G1 X112.367 Y115.375 E-0.04223 ; wipe and retract
G1 X112.583 Y115.449 E-0.06012 ; wipe and retract
G1 X112.644 Y115.498 E-0.02074 ; wipe and retract
G1 X112.731 Y115.647 E-0.04551 ; wipe and retract
G1 X112.738 Y115.711 E-0.01701 ; wipe and retract
;WIPE_END
G1 E-1.66326 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X110.053 Y112.888 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.990 Y112.979 E0.00512 ; perimeter
G1 X109.761 Y113.140 E0.01296 ; perimeter
G1 X109.593 Y113.160 E0.00781 ; perimeter
G1 X109.525 Y113.156 E0.00317 ; perimeter
G1 X109.332 Y113.056 E0.01007 ; perimeter
G1 X109.244 Y112.955 E0.00619 ; perimeter
G1 X109.094 Y112.647 E0.01589 ; perimeter
G1 X109.054 Y112.451 E0.00925 ; perimeter
G1 X108.920 Y112.165 E0.01466 ; perimeter
G1 X108.606 Y111.727 E0.02493 ; perimeter
G1 X108.462 Y111.487 E0.01298 ; perimeter
G1 X108.040 Y110.937 E0.03210 ; perimeter
G1 X107.846 Y110.731 E0.01312 ; perimeter
G1 X107.683 Y110.639 E0.00865 ; perimeter
G1 X107.603 Y110.554 E0.00543 ; perimeter
G1 X107.444 Y110.307 E0.01361 ; perimeter
G1 X107.420 Y110.206 E0.00478 ; perimeter
G1 X107.428 Y110.116 E0.00419 ; perimeter
G1 X107.504 Y109.937 E0.00899 ; perimeter
G1 X107.560 Y109.860 E0.00440 ; perimeter
G1 X107.777 Y109.770 E0.01088 ; perimeter
G1 X107.977 Y109.773 E0.00929 ; perimeter
G1 X108.156 Y109.904 E0.01025 ; perimeter
G1 X108.507 Y110.414 E0.02869 ; perimeter
G1 X109.386 Y111.494 E0.06449 ; perimeter
G1 X109.646 Y111.865 E0.02098 ; perimeter
G1 X109.819 Y112.073 E0.01254 ; perimeter
G1 X110.075 Y112.548 E0.02500 ; perimeter
G1 X110.093 Y112.620 E0.00342 ; perimeter
G1 X110.054 Y112.828 E0.00984 ; perimeter
G1 X109.943 Y112.899 F10800.000 ; move inwards before travel
G1 X109.615 Y112.741 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.421473
G1 F2400.000
G1 X109.614 Y112.654 E0.00275 ; infill
G1 X109.451 Y112.297 E0.01235 ; infill
;WIDTH:0.412099
G1 X109.392 Y112.204 E0.00337 ; infill
;WIDTH:0.384103
G1 X109.334 Y112.111 E0.00312 ; infill
;WIDTH:0.356109
G1 X109.258 Y111.981 E0.00391 ; infill
;WIDTH:0.329574
G1 X108.921 Y111.520 E0.01361 ; infill
;WIDTH:0.315304
G1 X108.761 Y111.292 E0.00632 ; infill
;WIDTH:0.274978
G1 X108.307 Y110.717 E0.01414 ; infill
;WIDTH:0.254208
G1 X107.725 Y110.052 E0.01553 ; infill
G1 X107.846 Y110.181 F10800.000 ; move to first infill point
;WIDTH:0.384484
G1 F2400.000
G1 X107.866 Y110.202 E0.00082 ; infill
;WIDTH:0.392583
G1 X107.943 Y110.308 E0.00381 ; infill
G1 X108.517 Y110.808 E0.02215 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.943 Y110.308 E-0.20105 ; wipe and retract
G1 X107.866 Y110.202 E-0.03457 ; wipe and retract
;WIPE_END
G1 E-2.16438 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X103.240 Y107.487 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.127 Y107.429 E0.00429 ; perimeter
G1 X102.912 Y107.223 E0.01010 ; perimeter
G1 X103.202 Y107.336 E0.01054 ; perimeter
G1 X103.233 Y107.358 E0.00131 ; perimeter
G1 X103.232 Y107.428 E0.00235 ; perimeter
G1 X103.707 Y107.683 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.535 Y107.914 E0.01334 ; perimeter
G1 X103.379 Y108.005 E0.00837 ; perimeter
G1 X103.126 Y107.972 E0.01185 ; perimeter
G1 X102.865 Y107.835 E0.01365 ; perimeter
G1 X102.616 Y107.615 E0.01539 ; perimeter
G1 X102.396 Y107.371 E0.01520 ; perimeter
G1 X101.444 Y106.438 E0.06176 ; perimeter
G1 X101.347 Y106.316 E0.00719 ; perimeter
G1 X101.145 Y105.946 E0.01955 ; perimeter
G1 X100.987 Y105.468 E0.02331 ; perimeter
G1 X100.945 Y105.278 E0.00901 ; perimeter
G1 X100.939 Y105.083 E0.00905 ; perimeter
G1 X101.038 Y104.856 E0.01145 ; perimeter
G1 X101.121 Y104.786 E0.00504 ; perimeter
G1 X101.315 Y104.753 E0.00909 ; perimeter
G1 X101.433 Y104.773 E0.00558 ; perimeter
G1 X101.564 Y104.848 E0.00697 ; perimeter
G1 X101.703 Y104.974 E0.00869 ; perimeter
G1 X101.749 Y105.044 E0.00387 ; perimeter
G1 X101.801 Y105.244 E0.00958 ; perimeter
G1 X101.918 Y105.432 E0.01025 ; perimeter
G1 X101.993 Y105.648 E0.01061 ; perimeter
G1 X102.122 Y105.920 E0.01397 ; perimeter
G1 X102.341 Y106.205 E0.01662 ; perimeter
G1 X102.506 Y106.379 E0.01112 ; perimeter
G1 X103.027 Y106.750 E0.02963 ; perimeter
G1 X103.431 Y106.909 E0.02009 ; perimeter
G1 X103.671 Y107.077 E0.01359 ; perimeter
G1 X103.740 Y107.288 E0.01026 ; perimeter
G1 X103.715 Y107.407 E0.00565 ; perimeter
G1 X103.738 Y107.568 E0.00751 ; perimeter
G1 X103.723 Y107.625 E0.00276 ; perimeter
G1 X103.420 Y107.709 F10800.000 ; move inwards before travel
G1 X102.722 Y107.073 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.41127
G1 F2400.000
G1 X102.491 Y106.879 E0.00924 ; infill
;WIDTH:0.376569
G1 X102.261 Y106.684 E0.00837 ; infill
;WIDTH:0.341868
G1 X101.747 Y106.130 E0.01877 ; infill
G1 X101.634 Y105.906 E0.00624 ; infill
;WIDTH:0.436574
G1 X101.572 Y105.801 E0.00400 ; infill
G1 X101.423 Y105.437 E0.01289 ; infill
;WIDTH:0.40705
G1 X101.365 Y105.234 E0.00639 ; infill
G1 X101.235 Y105.011 E0.00779 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.365 Y105.234 E-0.06791 ; wipe and retract
G1 X101.423 Y105.437 E-0.05568 ; wipe and retract
;WIPE_END
G1 E-2.27640 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X100.074 Y103.077 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.964 Y103.144 E0.00598 ; perimeter
G1 X99.759 Y103.165 E0.00951 ; perimeter
G1 X99.603 Y103.114 E0.00764 ; perimeter
G1 X99.482 Y103.017 E0.00716 ; perimeter
G1 X99.381 Y102.835 E0.00965 ; perimeter
G1 X99.351 Y102.519 E0.01469 ; perimeter
G1 X99.416 Y102.291 E0.01098 ; perimeter
G1 X99.464 Y102.243 E0.00313 ; perimeter
G1 X99.596 Y102.204 E0.00639 ; perimeter
G1 X99.802 Y102.238 E0.00966 ; perimeter
G1 X99.992 Y102.362 E0.01052 ; perimeter
G1 X100.144 Y102.562 E0.01166 ; perimeter
G1 X100.195 Y102.731 E0.00816 ; perimeter
G1 X100.171 Y102.922 E0.00890 ; perimeter
G1 X100.098 Y103.022 E0.00575 ; perimeter
G1 X99.949 Y103.043 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.964 Y103.144 E-0.04796 ; wipe and retract
G1 X99.759 Y103.165 E-0.05418 ; wipe and retract
G1 X99.603 Y103.114 E-0.04353 ; wipe and retract
G1 X99.482 Y103.017 E-0.04078 ; wipe and retract
G1 X99.381 Y102.835 E-0.05496 ; wipe and retract
G1 X99.351 Y102.519 E-0.08369 ; wipe and retract
G1 X99.416 Y102.291 E-0.06258 ; wipe and retract
G1 X99.464 Y102.243 E-0.01783 ; wipe and retract
G1 X99.596 Y102.204 E-0.03639 ; wipe and retract
G1 X99.802 Y102.238 E-0.05501 ; wipe and retract
G1 X99.992 Y102.362 E-0.05994 ; wipe and retract
G1 X100.144 Y102.562 E-0.06643 ; wipe and retract
G1 X100.195 Y102.731 E-0.04651 ; wipe and retract
G1 X100.171 Y102.922 E-0.05068 ; wipe and retract
G1 X100.098 Y103.022 E-0.03279 ; wipe and retract
;WIPE_END
G1 E-1.64673 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X99.171 Y100.389 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.043 Y100.488 E0.00746 ; perimeter
G1 X98.814 Y100.483 E0.01061 ; perimeter
G1 X98.614 Y100.321 E0.01193 ; perimeter
G1 X98.551 Y100.204 E0.00615 ; perimeter
G1 X98.518 Y100.012 E0.00901 ; perimeter
G1 X98.520 Y99.614 E0.01847 ; perimeter
G1 X98.572 Y99.296 E0.01492 ; perimeter
G1 X98.663 Y98.352 E0.04393 ; perimeter
G1 X98.672 Y97.931 E0.01951 ; perimeter
G1 X98.648 Y97.779 E0.00711 ; perimeter
G1 X98.643 Y97.443 E0.01557 ; perimeter
G1 X98.672 Y96.891 E0.02557 ; perimeter
G1 X98.723 Y96.623 E0.01266 ; perimeter
G1 X98.940 Y96.262 E0.01952 ; perimeter
G1 X99.559 Y95.543 E0.04393 ; perimeter
G1 X99.896 Y95.176 E0.02307 ; perimeter
G1 X100.495 Y94.694 E0.03561 ; perimeter
G1 X100.986 Y94.456 E0.02529 ; perimeter
G1 X101.532 Y94.339 E0.02584 ; perimeter
G1 X101.985 Y94.326 E0.02100 ; perimeter
G1 X102.189 Y94.392 E0.00995 ; perimeter
G1 X102.412 Y94.424 E0.01041 ; perimeter
G1 X102.518 Y94.503 E0.00613 ; perimeter
G1 X102.489 Y94.660 E0.00738 ; perimeter
G1 X102.501 Y94.698 E0.00187 ; perimeter
G1 X102.435 Y94.792 E0.00530 ; perimeter
G1 X102.283 Y94.854 E0.00761 ; perimeter
G1 X102.157 Y94.972 E0.00803 ; perimeter
G1 X101.942 Y95.034 E0.01035 ; perimeter
G1 X101.847 Y95.127 E0.00616 ; perimeter
G1 X101.624 Y95.183 E0.01064 ; perimeter
G1 X101.246 Y95.215 E0.01757 ; perimeter
G1 X100.981 Y95.138 E0.01281 ; perimeter
G1 X100.700 Y95.181 E0.01315 ; perimeter
G1 X100.499 Y95.162 E0.00935 ; perimeter
G1 X100.249 Y95.283 E0.01286 ; perimeter
G1 X99.985 Y95.351 E0.01261 ; perimeter
G1 X99.798 Y95.664 E0.01690 ; perimeter
G1 X99.600 Y95.930 E0.01535 ; perimeter
G1 X99.537 Y96.182 E0.01207 ; perimeter
G1 X99.395 Y96.407 E0.01228 ; perimeter
G1 X99.451 Y96.647 E0.01141 ; perimeter
G1 X99.431 Y96.783 E0.00639 ; perimeter
G1 X99.469 Y96.960 E0.00838 ; perimeter
G1 X99.457 Y97.056 E0.00445 ; perimeter
G1 X99.491 Y97.224 E0.00797 ; perimeter
G1 X99.369 Y98.305 E0.05036 ; perimeter
G1 X99.298 Y98.747 E0.02077 ; perimeter
G1 X99.306 Y99.229 E0.02230 ; perimeter
G1 X99.287 Y99.495 E0.01236 ; perimeter
G1 X99.314 Y100.017 E0.02421 ; perimeter
G1 X99.269 Y100.220 E0.00964 ; perimeter
G1 X99.201 Y100.337 E0.00630 ; perimeter
G1 X99.013 Y100.356 F10800.000 ; move inwards before travel
G1 X98.913 Y100.077 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.340037
G1 F2400.000
G1 X98.915 Y99.508 E0.01406 ; infill
;WIDTH:0.230342
G1 X98.964 Y98.715 E0.01237 ; infill
;WIDTH:0.252707
G1 X99.009 Y98.368 E0.00610 ; infill
;WIDTH:0.268151
G1 X99.019 Y98.257 E0.00209 ; infill
;WIDTH:0.303223
G1 X99.042 Y97.893 E0.00789 ; infill
;WIDTH:0.343388
G1 X99.038 Y97.745 E0.00370 ; infill
;WIDTH:0.356736
G1 X99.070 Y97.242 E0.01315 ; infill
G1 X99.034 Y96.574 E0.01747 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.070 Y97.242 E-0.17664 ; wipe and retract
G1 X99.038 Y97.745 E-0.13299 ; wipe and retract
;WIPE_END
G1 E-2.09037 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X100.637 Y94.912 ; move to first infill point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.38672
G1 F2400.000
G1 X101.332 Y94.793 E0.02017 ; infill
;WIDTH:0.405318
G1 X102.109 Y94.687 E0.02363 ; infill
G1 X102.119 Y94.678 F10800.000 ; move to first infill point
;WIDTH:0.255115
G1 F2400.000
G1 X101.935 Y94.675 E0.00323 ; infill
G1 X101.782 Y94.698 E0.00274 ; infill
G1 X101.056 Y94.909 E0.01334 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.782 Y94.698 E-0.19948 ; wipe and retract
G1 X101.935 Y94.675 E-0.04093 ; wipe and retract
G1 X102.119 Y94.678 E-0.04838 ; wipe and retract
;WIPE_END
G1 E-2.11122 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X104.020 Y94.512 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.043 Y94.390 E0.00577 ; perimeter
G1 X104.146 Y94.271 E0.00730 ; perimeter
G1 X104.371 Y94.111 E0.01278 ; perimeter
G1 X104.594 Y94.078 E0.01044 ; perimeter
G1 X105.043 Y94.117 E0.02087 ; perimeter
G1 X105.525 Y94.335 E0.02448 ; perimeter
G1 X105.699 Y94.443 E0.00947 ; perimeter
G1 X106.602 Y94.903 E0.04696 ; perimeter
G1 X107.052 Y95.089 E0.02258 ; perimeter
G1 X107.478 Y95.305 E0.02211 ; perimeter
G1 X107.659 Y95.498 E0.01226 ; perimeter
G1 X107.786 Y95.761 E0.01356 ; perimeter
G1 X107.838 Y95.985 E0.01063 ; perimeter
G1 X107.833 Y96.112 E0.00591 ; perimeter
G1 X107.735 Y96.145 E0.00481 ; perimeter
G1 X107.440 Y96.176 E0.01372 ; perimeter
G1 X107.147 Y96.100 E0.01401 ; perimeter
G1 X106.815 Y95.859 E0.01903 ; perimeter
G1 X106.642 Y95.673 E0.01177 ; perimeter
G1 X106.081 Y95.336 E0.03030 ; perimeter
G1 X105.504 Y95.052 E0.02977 ; perimeter
G1 X105.081 Y94.985 E0.01985 ; perimeter
G1 X104.998 Y94.952 E0.00415 ; perimeter
G1 X104.605 Y94.913 E0.01830 ; perimeter
G1 X104.437 Y94.877 E0.00799 ; perimeter
G1 X104.190 Y94.734 E0.01318 ; perimeter
G1 X104.037 Y94.570 E0.01042 ; perimeter
G1 X104.117 Y94.433 F10800.000 ; move inwards before travel
G1 X104.282 Y94.481 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.338138
G1 F2400.000
G1 X104.936 Y94.527 E0.01609 ; infill
G1 X105.931 Y94.831 E0.02554 ; infill
G1 X105.535 Y94.726 F10800.000 ; move to first infill point
;WIDTH:0.182985
G1 F2400.000
G1 X106.233 Y95.064 E0.00903 ; infill
;WIDTH:0.202379
G1 X106.471 Y95.196 E0.00360 ; infill
;WIDTH:0.234407
G1 X106.662 Y95.292 E0.00341 ; infill
;WIDTH:0.266434
G1 X106.853 Y95.388 E0.00397 ; infill
;WIDTH:0.275744
G1 X106.880 Y95.404 E0.00062 ; infill
;WIDTH:0.286503
G1 X106.901 Y95.419 E0.00051 ; infill
;WIDTH:0.323774
G1 X106.986 Y95.483 E0.00249 ; infill
;WIDTH:0.363906
G1 X107.228 Y95.638 E0.00769 ; infill
G1 X107.324 Y95.727 E0.00349 ; infill
G1 X107.485 Y95.929 E0.00689 ; infill
G1 X108.613 Y96.571 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.680 Y96.479 E0.00528 ; perimeter
G1 X108.885 Y96.446 E0.00959 ; perimeter
G1 X109.151 Y96.463 E0.01234 ; perimeter
G1 X109.257 Y96.427 E0.00521 ; perimeter
G1 X109.511 Y96.451 E0.01181 ; perimeter
G1 X109.657 Y96.406 E0.00704 ; perimeter
G1 X109.864 Y96.452 E0.00984 ; perimeter
G1 X110.159 Y96.567 E0.01468 ; perimeter
G1 X110.267 Y96.675 E0.00705 ; perimeter
G1 X110.402 Y96.860 E0.01062 ; perimeter
G1 X110.581 Y97.161 E0.01622 ; perimeter
G1 X110.371 Y97.306 E0.01186 ; perimeter
G1 X110.161 Y97.310 E0.00969 ; perimeter
G1 X109.945 Y97.340 E0.01010 ; perimeter
G1 X109.607 Y97.311 E0.01572 ; perimeter
G1 X109.316 Y97.198 E0.01446 ; perimeter
G1 X108.838 Y96.876 E0.02670 ; perimeter
G1 X108.651 Y96.617 E0.01479 ; perimeter
G1 X108.719 Y96.528 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.680 Y96.479 E-0.03736 ; wipe and retract
G1 X108.885 Y96.446 E-0.05466 ; wipe and retract
G1 X109.151 Y96.463 E-0.07028 ; wipe and retract
G1 X109.257 Y96.427 E-0.02968 ; wipe and retract
G1 X109.511 Y96.451 E-0.06730 ; wipe and retract
G1 X109.657 Y96.406 E-0.04013 ; wipe and retract
G1 X109.864 Y96.452 E-0.05606 ; wipe and retract
G1 X110.159 Y96.567 E-0.08361 ; wipe and retract
G1 X110.267 Y96.675 E-0.04015 ; wipe and retract
G1 X110.402 Y96.860 E-0.06048 ; wipe and retract
G1 X110.581 Y97.161 E-0.09239 ; wipe and retract
G1 X110.371 Y97.306 E-0.06758 ; wipe and retract
G1 X110.161 Y97.310 E-0.05522 ; wipe and retract
G1 X109.945 Y97.340 E-0.05757 ; wipe and retract
G1 X109.607 Y97.311 E-0.08958 ; wipe and retract
G1 X109.316 Y97.198 E-0.08235 ; wipe and retract
G1 X108.838 Y96.876 E-0.15211 ; wipe and retract
G1 X108.651 Y96.617 E-0.08428 ; wipe and retract
;WIPE_END
G1 E-1.17923 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X110.800 Y97.297 ; move to first perimeter point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.118 Y97.308 E0.01475 ; perimeter
G1 X111.467 Y97.281 E0.01623 ; perimeter
G1 X111.627 Y97.296 E0.00742 ; perimeter
G1 X111.804 Y97.430 E0.01029 ; perimeter
G1 X111.893 Y97.541 E0.00661 ; perimeter
G1 X112.065 Y97.889 E0.01798 ; perimeter
G1 X112.166 Y98.485 E0.02797 ; perimeter
G1 X112.162 Y98.689 E0.00946 ; perimeter
G1 X112.232 Y98.835 E0.00753 ; perimeter
G1 X112.225 Y98.963 E0.00595 ; perimeter
G1 X112.348 Y99.179 E0.01148 ; perimeter
G1 X112.382 Y99.284 E0.00514 ; perimeter
G1 X112.826 Y99.954 E0.03721 ; perimeter
G1 X113.004 Y100.014 E0.00873 ; perimeter
G1 X113.149 Y100.142 E0.00896 ; perimeter
G1 X113.323 Y100.214 E0.00874 ; perimeter
G1 X113.505 Y100.424 E0.01287 ; perimeter
G1 X113.556 Y100.546 E0.00614 ; perimeter
G1 X113.541 Y100.771 E0.01045 ; perimeter
G1 X113.432 Y100.982 E0.01099 ; perimeter
G1 X113.298 Y101.090 E0.00798 ; perimeter
G1 X113.186 Y101.110 E0.00527 ; perimeter
G1 X112.970 Y101.078 E0.01010 ; perimeter
G1 X112.856 Y101.034 E0.00564 ; perimeter
G1 X112.586 Y100.672 E0.02094 ; perimeter
G1 X112.406 Y100.335 E0.01768 ; perimeter
G1 X111.820 Y99.634 E0.04236 ; perimeter
G1 X111.419 Y99.094 E0.03116 ; perimeter
G1 X111.225 Y98.536 E0.02736 ; perimeter
G1 X111.200 Y98.335 E0.00935 ; perimeter
G1 X110.950 Y97.491 E0.04080 ; perimeter
G1 X110.826 Y97.424 E0.00652 ; perimeter
G1 X110.812 Y97.356 E0.00322 ; perimeter
G1 X111.101 Y97.399 F10800.000 ; move inwards before travel
G1 X111.254 Y97.539 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.428062
G1 F2400.000
G1 X111.469 Y97.716 E0.00893 ; infill
;WIDTH:0.447797
G1 X111.487 Y97.744 E0.00113 ; infill
;WIDTH:0.469109
G1 X111.513 Y97.793 E0.00195 ; infill
;WIDTH:0.495059
G1 X111.600 Y98.005 E0.00862 ; infill
G1 X111.706 Y98.518 E0.01970 ; infill
;WIDTH:0.400728
G1 X111.740 Y98.737 E0.00660 ; infill
G1 X111.809 Y98.919 E0.00579 ; infill
G1 X111.838 Y99.013 F10800.000 ; move to first infill point
;WIDTH:0.328729
G1 F2400.000
G1 X111.870 Y99.084 E0.00185 ; infill
;WIDTH:0.296643
G1 X112.025 Y99.322 E0.00599 ; infill
;WIDTH:0.262692
G1 X112.076 Y99.419 E0.00200 ; infill
;WIDTH:0.227867
G1 X112.271 Y99.685 E0.00508 ; infill
;WIDTH:0.188303
G1 X112.454 Y99.930 E0.00370 ; infill
;WIDTH:0.154104
G1 X112.637 Y100.175 E0.00283 ; infill
;WIDTH:0.119906
G1 X112.656 Y100.198 E0.00019 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.637 Y100.175 E-0.00799 ; wipe and retract
;WIPE_END
G1 E-2.39201 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 X110.159 Y96.936 ; move to first infill point
G1 Z16.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.387364
G1 F2400.000
G1 X109.522 Y96.851 E0.01842 ; infill
;WIDTH:0.356418
G1 X109.077 Y96.746 E0.01191 ; infill
G1 X109.147 Y96.704 F10800.000 ; move to first infill point
;WIDTH:0.392672
G1 F2400.000
G1 X110.217 Y97.021 E0.03245 ; infill
G1 X110.241 Y97.060 F10800.000 ; move to first infill point
;WIDTH:0.15983
G1 F2400.000
G1 X109.431 Y96.685 E0.00868 ; infill
;LAYER_CHANGE
;Z:16.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;16.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.241 Y97.060 E-0.23556 ; wipe and retract
;WIPE_END
G1 E-2.16444 F2400.000 ; retract
G1 Z16.275 F10800.000 ; lift Z
G1 Z16.400 ; move to next layer (81)
;AFTER_LAYER_CHANGE
;16.4
G1 X111.130 Y97.519 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.276 Y97.367 E0.00975 ; perimeter
G1 X111.340 Y97.330 E0.00345 ; perimeter
G1 X111.549 Y97.314 E0.00971 ; perimeter
G1 X111.669 Y97.358 E0.00591 ; perimeter
G1 X111.740 Y97.362 E0.00332 ; perimeter
G1 X111.833 Y97.419 E0.00501 ; perimeter
G1 X112.002 Y97.629 E0.01250 ; perimeter
G1 X112.064 Y97.770 E0.00715 ; perimeter
G1 X112.113 Y97.970 E0.00952 ; perimeter
G1 X112.146 Y98.307 E0.01569 ; perimeter
G1 X112.147 Y98.886 E0.02684 ; perimeter
G1 X112.222 Y99.077 E0.00949 ; perimeter
G1 X112.230 Y99.180 E0.00480 ; perimeter
G1 X112.293 Y99.422 E0.01156 ; perimeter
G1 X112.487 Y99.864 E0.02238 ; perimeter
G1 X112.870 Y100.038 E0.01949 ; perimeter
G1 X113.160 Y100.131 E0.01409 ; perimeter
G1 X113.199 Y100.128 E0.00181 ; perimeter
G1 X113.407 Y100.215 E0.01045 ; perimeter
G1 X113.560 Y100.383 E0.01056 ; perimeter
G1 X113.615 Y100.538 E0.00758 ; perimeter
G1 X113.602 Y100.710 E0.00800 ; perimeter
G1 X113.461 Y100.931 E0.01216 ; perimeter
G1 X113.324 Y101.029 E0.00779 ; perimeter
G1 X113.200 Y101.054 E0.00587 ; perimeter
G1 X113.075 Y101.038 E0.00586 ; perimeter
G1 X112.890 Y100.972 E0.00908 ; perimeter
G1 X112.695 Y100.702 E0.01541 ; perimeter
G1 X112.549 Y100.400 E0.01557 ; perimeter
G1 X112.564 Y100.243 E0.00729 ; perimeter
G1 X112.263 Y99.849 E0.02298 ; perimeter
G1 X111.780 Y99.379 E0.03119 ; perimeter
G1 X111.508 Y99.002 E0.02154 ; perimeter
G1 X111.427 Y98.842 E0.00831 ; perimeter
G1 X111.290 Y98.425 E0.02035 ; perimeter
G1 X111.233 Y98.161 E0.01247 ; perimeter
G1 X111.140 Y97.902 E0.01278 ; perimeter
G1 X111.100 Y97.669 E0.01093 ; perimeter
G1 X111.134 Y97.579 E0.00446 ; perimeter
G1 X111.340 Y97.515 F10800.000 ; move inwards before travel
G1 X111.566 Y97.788 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.385911
G1 F2400.000
G1 X111.668 Y98.045 E0.00790 ; infill
G1 X111.749 Y98.565 E0.01499 ; infill
;WIDTH:0.290351
G1 X111.785 Y98.742 E0.00372 ; infill
G1 X111.986 Y99.149 E0.00934 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.785 Y98.742 E-0.11977 ; wipe and retract
G1 X111.749 Y98.565 E-0.04769 ; wipe and retract
;WIPE_END
G1 E-2.23254 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X110.379 Y97.159 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.234 Y97.259 E0.00811 ; perimeter
G1 X109.880 Y97.303 E0.01657 ; perimeter
G1 X109.683 Y97.281 E0.00918 ; perimeter
G1 X109.461 Y97.184 E0.01122 ; perimeter
G1 X109.245 Y97.024 E0.01246 ; perimeter
G1 X109.061 Y96.710 E0.01685 ; perimeter
G1 X109.313 Y96.526 E0.01440 ; perimeter
G1 X109.803 Y96.395 E0.02351 ; perimeter
G1 X109.904 Y96.417 E0.00477 ; perimeter
G1 X110.193 Y96.517 E0.01419 ; perimeter
G1 X110.306 Y96.657 E0.00832 ; perimeter
G1 X110.394 Y96.900 E0.01197 ; perimeter
G1 X110.401 Y97.103 E0.00943 ; perimeter
G1 X110.204 Y97.146 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.234 Y97.259 E-0.06010 ; wipe and retract
G1 X109.880 Y97.303 E-0.09440 ; wipe and retract
G1 X109.683 Y97.281 E-0.05228 ; wipe and retract
G1 X109.461 Y97.184 E-0.06391 ; wipe and retract
G1 X109.245 Y97.024 E-0.07101 ; wipe and retract
G1 X109.061 Y96.710 E-0.09601 ; wipe and retract
G1 X109.313 Y96.526 E-0.08205 ; wipe and retract
G1 X109.803 Y96.395 E-0.13393 ; wipe and retract
G1 X109.904 Y96.417 E-0.02717 ; wipe and retract
G1 X110.193 Y96.517 E-0.08085 ; wipe and retract
G1 X110.306 Y96.657 E-0.04739 ; wipe and retract
G1 X110.394 Y96.900 E-0.06820 ; wipe and retract
G1 X110.401 Y97.103 E-0.05374 ; wipe and retract
;WIPE_END
G1 E-1.46897 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X107.480 Y96.060 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.327 Y96.078 E0.00713 ; perimeter
G1 X107.073 Y96.008 E0.01218 ; perimeter
G1 X106.633 Y95.716 E0.02447 ; perimeter
G1 X106.167 Y95.449 E0.02489 ; perimeter
G1 X105.517 Y95.142 E0.03330 ; perimeter
G1 X105.022 Y94.946 E0.02463 ; perimeter
G1 X104.616 Y94.888 E0.01901 ; perimeter
G1 X104.518 Y94.846 E0.00493 ; perimeter
G1 X104.408 Y94.777 E0.00604 ; perimeter
G1 X104.265 Y94.631 E0.00948 ; perimeter
G1 X104.241 Y94.495 E0.00640 ; perimeter
G1 X104.264 Y94.375 E0.00565 ; perimeter
G1 X104.352 Y94.243 E0.00736 ; perimeter
G1 X104.509 Y94.108 E0.00955 ; perimeter
G1 X104.704 Y94.077 E0.00915 ; perimeter
G1 X105.069 Y94.109 E0.01697 ; perimeter
G1 X105.379 Y94.202 E0.01500 ; perimeter
G1 X106.557 Y94.813 E0.06147 ; perimeter
G1 X106.976 Y94.984 E0.02094 ; perimeter
G1 X107.471 Y95.227 E0.02557 ; perimeter
G1 X107.663 Y95.433 E0.01304 ; perimeter
G1 X107.758 Y95.614 E0.00948 ; perimeter
G1 X107.726 Y95.862 E0.01156 ; perimeter
G1 X107.573 Y96.028 E0.01047 ; perimeter
G1 X107.536 Y96.040 E0.00177 ; perimeter
G1 X107.366 Y95.956 F10800.000 ; move inwards before travel
G1 X107.461 Y95.793 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.424822
G1 F2400.000
G1 X107.209 Y95.580 E0.01047 ; infill
G1 X107.030 Y95.477 E0.00657 ; infill
;WIDTH:0.39822
G1 X106.851 Y95.374 E0.00611 ; infill
;WIDTH:0.371618
G1 X106.608 Y95.254 E0.00741 ; infill
;WIDTH:0.338562
G1 X106.406 Y95.155 E0.00553 ; infill
;WIDTH:0.308733
G1 X105.224 Y94.584 E0.02900 ; infill
G1 X104.990 Y94.521 E0.00536 ; infill
G1 X104.506 Y94.446 E0.01083 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.990 Y94.521 E-0.12926 ; wipe and retract
G1 X105.224 Y94.584 E-0.06397 ; wipe and retract
G1 X106.406 Y95.155 E-0.34624 ; wipe and retract
;WIPE_END
G1 E-1.86053 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X102.303 Y94.641 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.233 Y94.747 E0.00590 ; perimeter
G1 X102.211 Y94.886 E0.00655 ; perimeter
G1 X102.158 Y94.939 E0.00346 ; perimeter
G1 X102.060 Y94.968 E0.00474 ; perimeter
G1 X101.882 Y95.142 E0.01152 ; perimeter
G1 X101.709 Y95.193 E0.00836 ; perimeter
G1 X101.440 Y95.200 E0.01249 ; perimeter
G1 X101.076 Y95.101 E0.01744 ; perimeter
G1 X101.010 Y95.043 E0.00408 ; perimeter
G1 X100.653 Y94.922 E0.01745 ; perimeter
G1 X100.761 Y94.848 E0.00605 ; perimeter
G1 X100.887 Y94.643 E0.01115 ; perimeter
G1 X101.081 Y94.545 E0.01004 ; perimeter
G1 X101.120 Y94.480 E0.00352 ; perimeter
G1 X101.196 Y94.443 E0.00392 ; perimeter
G1 X101.428 Y94.382 E0.01113 ; perimeter
G1 X101.907 Y94.356 E0.02223 ; perimeter
G1 X102.182 Y94.449 E0.01341 ; perimeter
G1 X102.276 Y94.530 E0.00575 ; perimeter
G1 X102.286 Y94.583 E0.00249 ; perimeter
G1 X102.182 Y94.681 F10800.000 ; move inwards before travel
G1 X101.998 Y94.688 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.181087
G1 F2400.000
G1 X101.873 Y94.691 E0.00143 ; infill
G1 X101.161 Y94.855 E0.00840 ; infill
G1 X101.154 Y94.849 F10800.000 ; move to first infill point
;WIDTH:0.265218
G1 F2400.000
G1 X101.257 Y94.822 E0.00198 ; infill
;WIDTH:0.299829
G1 X101.361 Y94.796 E0.00228 ; infill
;WIDTH:0.322253
G1 X101.847 Y94.601 E0.01215 ; infill
G1 X101.991 Y94.732 F10800.000 ; move to first infill point
;WIDTH:0.38471
G1 F2400.000
G1 X101.142 Y94.838 E0.02433 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.991 Y94.732 E-0.22589 ; wipe and retract
;WIPE_END
G1 E-2.17411 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X99.259 Y96.226 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.237 Y96.346 E0.00563 ; perimeter
G1 X99.363 Y96.547 E0.01096 ; perimeter
G1 X99.426 Y96.765 E0.01055 ; perimeter
G1 X99.465 Y96.813 E0.00286 ; perimeter
G1 X99.557 Y97.228 E0.01967 ; perimeter
G1 X99.515 Y97.688 E0.02138 ; perimeter
G1 X99.382 Y98.668 E0.04583 ; perimeter
G1 X99.322 Y99.530 E0.04002 ; perimeter
G1 X99.313 Y99.919 E0.01803 ; perimeter
G1 X99.248 Y100.162 E0.01166 ; perimeter
G1 X99.198 Y100.251 E0.00472 ; perimeter
G1 X99.003 Y100.381 E0.01083 ; perimeter
G1 X98.927 Y100.379 E0.00354 ; perimeter
G1 X98.827 Y100.333 E0.00509 ; perimeter
G1 X98.719 Y100.310 E0.00512 ; perimeter
G1 X98.601 Y100.213 E0.00706 ; perimeter
G1 X98.566 Y100.156 E0.00312 ; perimeter
G1 X98.514 Y99.941 E0.01023 ; perimeter
G1 X98.519 Y99.458 E0.02238 ; perimeter
G1 X98.706 Y97.021 E0.11320 ; perimeter
G1 X98.728 Y96.907 E0.00540 ; perimeter
G1 X98.791 Y96.755 E0.00761 ; perimeter
G1 X98.979 Y96.491 E0.01503 ; perimeter
G1 X99.215 Y96.268 E0.01504 ; perimeter
G1 X99.216 Y96.340 F10800.000 ; move inwards before travel
G1 X99.086 Y96.757 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.397714
G1 F2400.000
G1 X99.121 Y97.255 E0.01475 ; infill
G1 X99.036 Y98.131 E0.02594 ; infill
;WIDTH:0.390003
G1 X98.984 Y98.622 E0.01426 ; infill
;WIDTH:0.361266
G1 X98.922 Y99.475 E0.02265 ; infill
G1 X98.915 Y99.862 E0.01022 ; infill
G1 X98.882 Y100.098 E0.00632 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.915 Y99.862 E-0.06298 ; wipe and retract
G1 X98.922 Y99.475 E-0.10192 ; wipe and retract
G1 X98.984 Y98.622 E-0.22584 ; wipe and retract
;WIPE_END
G1 E-2.00926 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X100.167 Y103.095 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.037 Y103.216 E0.00825 ; perimeter
G1 X99.765 Y103.249 E0.01271 ; perimeter
G1 X99.651 Y103.204 E0.00567 ; perimeter
G1 X99.545 Y103.120 E0.00628 ; perimeter
G1 X99.430 Y102.941 E0.00986 ; perimeter
G1 X99.398 Y102.813 E0.00610 ; perimeter
G1 X99.392 Y102.666 E0.00683 ; perimeter
G1 X99.457 Y102.433 E0.01119 ; perimeter
G1 X99.519 Y102.366 E0.00423 ; perimeter
G1 X99.639 Y102.326 E0.00587 ; perimeter
G1 X99.885 Y102.351 E0.01144 ; perimeter
G1 X100.017 Y102.433 E0.00720 ; perimeter
G1 X100.136 Y102.572 E0.00848 ; perimeter
G1 X100.201 Y102.719 E0.00745 ; perimeter
G1 X100.222 Y102.794 E0.00360 ; perimeter
G1 X100.192 Y103.040 E0.01149 ; perimeter
G1 X99.989 Y103.085 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.037 Y103.216 E-0.06191 ; wipe and retract
G1 X99.765 Y103.249 E-0.07242 ; wipe and retract
G1 X99.651 Y103.204 E-0.03232 ; wipe and retract
G1 X99.545 Y103.120 E-0.03575 ; wipe and retract
G1 X99.430 Y102.941 E-0.05619 ; wipe and retract
G1 X99.398 Y102.813 E-0.03473 ; wipe and retract
G1 X99.392 Y102.666 E-0.03893 ; wipe and retract
G1 X99.457 Y102.433 E-0.06372 ; wipe and retract
G1 X99.519 Y102.366 E-0.02410 ; wipe and retract
G1 X99.639 Y102.326 E-0.03342 ; wipe and retract
G1 X99.885 Y102.351 E-0.06519 ; wipe and retract
G1 X100.017 Y102.433 E-0.04101 ; wipe and retract
G1 X100.136 Y102.572 E-0.04831 ; wipe and retract
G1 X100.201 Y102.719 E-0.04246 ; wipe and retract
G1 X100.222 Y102.794 E-0.02049 ; wipe and retract
G1 X100.192 Y103.040 E-0.06546 ; wipe and retract
;WIPE_END
G1 E-1.66359 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X102.928 Y107.369 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.161 Y107.479 E0.00875 ; perimeter
G1 X103.195 Y107.587 E0.00382 ; perimeter
G1 X102.974 Y107.407 E0.00966 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.161 Y107.479 E-0.05301 ; wipe and retract
G1 X103.195 Y107.587 E-0.02978 ; wipe and retract
G1 X102.974 Y107.407 E-0.07528 ; wipe and retract
;WIPE_END
G1 E-2.24193 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X100.948 Y104.846 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.041 Y104.711 E0.00760 ; perimeter
G1 X101.255 Y104.659 E0.01020 ; perimeter
G1 X101.426 Y104.687 E0.00807 ; perimeter
G1 X101.588 Y104.807 E0.00933 ; perimeter
G1 X101.712 Y104.983 E0.00996 ; perimeter
G1 X101.791 Y105.283 E0.01439 ; perimeter
G1 X101.944 Y105.710 E0.02099 ; perimeter
G1 X102.263 Y106.333 E0.03246 ; perimeter
G1 X102.706 Y106.702 E0.02670 ; perimeter
G1 X102.931 Y106.840 E0.01221 ; perimeter
G1 X103.367 Y107.039 E0.02222 ; perimeter
G1 X103.569 Y107.167 E0.01104 ; perimeter
G1 X103.630 Y107.361 E0.00945 ; perimeter
G1 X103.711 Y107.462 E0.00599 ; perimeter
G1 X103.754 Y107.660 E0.00941 ; perimeter
G1 X103.771 Y107.916 E0.01185 ; perimeter
G1 X103.578 Y108.132 E0.01343 ; perimeter
G1 X103.538 Y108.151 E0.00208 ; perimeter
G1 X103.257 Y108.119 E0.01306 ; perimeter
G1 X102.988 Y108.040 E0.01302 ; perimeter
G1 X102.428 Y107.583 E0.03347 ; perimeter
G1 X101.939 Y107.131 E0.03084 ; perimeter
G1 X101.514 Y106.684 E0.02856 ; perimeter
G1 X101.365 Y106.501 E0.01093 ; perimeter
G1 X101.237 Y106.218 E0.01439 ; perimeter
G1 X100.943 Y105.303 E0.04453 ; perimeter
G1 X100.906 Y104.949 E0.01649 ; perimeter
G1 X100.925 Y104.902 E0.00236 ; perimeter
G1 X101.111 Y104.827 F10800.000 ; move inwards before travel
G1 X101.292 Y104.909 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.346973
G1 F2400.000
G1 X101.341 Y105.194 E0.00731 ; infill
G1 X101.567 Y105.885 E0.01838 ; infill
G1 X101.740 Y106.270 E0.01066 ; infill
G1 X101.975 Y106.602 E0.01030 ; infill
;WIDTH:0.382111
G1 X102.228 Y106.838 E0.00976 ; infill
;WIDTH:0.401034
G1 X102.471 Y107.051 E0.00962 ; infill
;WIDTH:0.425077
G1 X102.723 Y107.242 E0.01004 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.471 Y107.051 E-0.08334 ; wipe and retract
;WIPE_END
G1 E-2.31666 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X107.398 Y110.207 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.405 Y110.111 E0.00443 ; perimeter
G1 X107.518 Y109.930 E0.00987 ; perimeter
G1 X107.757 Y109.801 E0.01259 ; perimeter
G1 X107.984 Y109.822 E0.01059 ; perimeter
G1 X108.139 Y109.939 E0.00898 ; perimeter
G1 X108.468 Y110.431 E0.02742 ; perimeter
G1 X108.536 Y110.608 E0.00877 ; perimeter
G1 X108.955 Y111.129 E0.03097 ; perimeter
G1 X109.109 Y111.248 E0.00901 ; perimeter
G1 X109.456 Y111.650 E0.02461 ; perimeter
G1 X109.691 Y111.881 E0.01527 ; perimeter
G1 X109.963 Y112.208 E0.01967 ; perimeter
G1 X110.156 Y112.622 E0.02117 ; perimeter
G1 X110.151 Y112.862 E0.01115 ; perimeter
G1 X110.077 Y112.947 E0.00521 ; perimeter
G1 X109.839 Y113.074 E0.01248 ; perimeter
G1 X109.651 Y113.095 E0.00877 ; perimeter
G1 X109.311 Y112.918 E0.01772 ; perimeter
G1 X109.029 Y112.336 E0.03000 ; perimeter
G1 X108.724 Y111.784 E0.02920 ; perimeter
G1 X108.448 Y111.368 E0.02312 ; perimeter
G1 X108.308 Y111.057 E0.01582 ; perimeter
G1 X107.919 Y110.748 E0.02300 ; perimeter
G1 X107.586 Y110.561 E0.01772 ; perimeter
G1 X107.424 Y110.339 E0.01269 ; perimeter
G1 X107.410 Y110.266 E0.00347 ; perimeter
G1 X107.475 Y110.150 F10800.000 ; move inwards before travel
G1 X107.718 Y110.091 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.214
G1 F2400.000
G1 X108.313 Y110.703 E0.01215 ; infill
G1 X108.650 Y111.172 F10800.000 ; move to first infill point
;WIDTH:0.108751
G1 F2400.000
G1 X108.689 Y111.235 E0.00040 ; infill
;WIDTH:0.121133
G1 X108.761 Y111.333 E0.00079 ; infill
;WIDTH:0.152639
G1 X108.827 Y111.404 E0.00089 ; infill
;WIDTH:0.184146
G1 X108.893 Y111.475 E0.00114 ; infill
;WIDTH:0.207692
G1 X109.002 Y111.619 E0.00248 ; infill
;WIDTH:0.242132
G1 X109.097 Y111.756 E0.00275 ; infill
;WIDTH:0.278937
G1 X109.197 Y111.899 E0.00344 ; infill
;WIDTH:0.323518
G1 X109.291 Y112.023 E0.00362 ; infill
;WIDTH:0.37206
G1 X109.392 Y112.156 E0.00458 ; infill
;WIDTH:0.41646
G1 X109.492 Y112.311 E0.00573 ; infill
;WIDTH:0.465835
G1 X109.624 Y112.526 E0.00887 ; infill
G1 X109.766 Y112.839 E0.01209 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.624 Y112.526 E-0.09069 ; wipe and retract
G1 X109.492 Y112.311 E-0.06658 ; wipe and retract
;WIPE_END
G1 E-2.24273 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X107.843 Y110.225 ; move to first infill point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.371136
G1 F2400.000
G1 X107.829 Y110.218 E0.00041 ; infill
;WIDTH:0.357623
G1 X107.811 Y110.208 E0.00054 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.829 Y110.218 E-0.00547 ; wipe and retract
;WIPE_END
G1 E-2.39453 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X111.969 Y115.505 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.164 Y115.395 E0.01039 ; perimeter
G1 X112.365 Y115.366 E0.00939 ; perimeter
G1 X112.479 Y115.378 E0.00529 ; perimeter
G1 X112.659 Y115.440 E0.00882 ; perimeter
G1 X112.737 Y115.497 E0.00450 ; perimeter
G1 X112.827 Y115.650 E0.00823 ; perimeter
G1 X112.837 Y115.769 E0.00552 ; perimeter
G1 X112.815 Y115.895 E0.00595 ; perimeter
G1 X112.773 Y115.978 E0.00429 ; perimeter
G1 X112.684 Y116.074 E0.00606 ; perimeter
G1 X112.603 Y116.116 E0.00425 ; perimeter
G1 X112.404 Y116.155 E0.00937 ; perimeter
G1 X112.234 Y116.149 E0.00790 ; perimeter
G1 X112.086 Y116.105 E0.00714 ; perimeter
G1 X112.015 Y116.062 E0.00386 ; perimeter
G1 X111.950 Y115.990 E0.00448 ; perimeter
G1 X111.907 Y115.904 E0.00448 ; perimeter
G1 X111.881 Y115.782 E0.00573 ; perimeter
G1 X111.902 Y115.630 E0.00713 ; perimeter
G1 X111.940 Y115.558 E0.00380 ; perimeter
G1 X112.184 Y115.568 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.164 Y115.395 E-0.07302 ; wipe and retract
G1 X112.365 Y115.366 E-0.05350 ; wipe and retract
G1 X112.479 Y115.378 E-0.03015 ; wipe and retract
G1 X112.659 Y115.440 E-0.05026 ; wipe and retract
G1 X112.737 Y115.497 E-0.02566 ; wipe and retract
G1 X112.827 Y115.650 E-0.04687 ; wipe and retract
G1 X112.837 Y115.769 E-0.03144 ; wipe and retract
G1 X112.815 Y115.895 E-0.03388 ; wipe and retract
G1 X112.773 Y115.978 E-0.02446 ; wipe and retract
G1 X112.684 Y116.074 E-0.03454 ; wipe and retract
G1 X112.603 Y116.116 E-0.02418 ; wipe and retract
G1 X112.404 Y116.155 E-0.05339 ; wipe and retract
G1 X112.234 Y116.149 E-0.04501 ; wipe and retract
G1 X112.086 Y116.105 E-0.04066 ; wipe and retract
G1 X112.015 Y116.062 E-0.02196 ; wipe and retract
G1 X111.950 Y115.990 E-0.02550 ; wipe and retract
G1 X111.907 Y115.904 E-0.02552 ; wipe and retract
G1 X111.881 Y115.782 E-0.03267 ; wipe and retract
G1 X111.902 Y115.630 E-0.04059 ; wipe and retract
G1 X111.940 Y115.558 E-0.02162 ; wipe and retract
;WIPE_END
G1 E-1.66512 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X114.424 Y115.690 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.412 Y115.587 E0.00479 ; perimeter
G1 X114.430 Y115.413 E0.00810 ; perimeter
G1 X114.479 Y115.324 E0.00469 ; perimeter
G1 X114.866 Y114.914 E0.02613 ; perimeter
G1 X115.001 Y114.667 E0.01304 ; perimeter
G1 X115.168 Y114.486 E0.01142 ; perimeter
G1 X115.280 Y114.293 E0.01033 ; perimeter
G1 X115.381 Y114.232 E0.00547 ; perimeter
G1 X115.535 Y114.222 E0.00712 ; perimeter
G1 X115.674 Y114.262 E0.00672 ; perimeter
G1 X115.724 Y114.370 E0.00552 ; perimeter
G1 X115.779 Y114.427 E0.00364 ; perimeter
G1 X115.858 Y114.666 E0.01168 ; perimeter
G1 X115.848 Y114.887 E0.01024 ; perimeter
G1 X115.763 Y115.128 E0.01181 ; perimeter
G1 X115.589 Y115.274 E0.01053 ; perimeter
G1 X115.313 Y115.568 E0.01869 ; perimeter
G1 X115.272 Y115.650 E0.00425 ; perimeter
G1 X115.134 Y115.825 E0.01031 ; perimeter
G1 X115.052 Y115.893 E0.00494 ; perimeter
G1 X114.890 Y115.969 E0.00832 ; perimeter
G1 X114.793 Y115.981 E0.00452 ; perimeter
G1 X114.642 Y115.940 E0.00722 ; perimeter
G1 X114.503 Y115.854 E0.00759 ; perimeter
G1 X114.445 Y115.746 E0.00568 ; perimeter
G1 X114.493 Y115.613 F10800.000 ; move inwards before travel
G1 X114.672 Y115.665 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291877
G1 F2400.000
G1 X114.734 Y115.626 E0.00152 ; infill
;WIDTH:0.328526
G1 X114.798 Y115.585 E0.00179 ; infill
;WIDTH:0.339479
G1 X115.192 Y115.129 E0.01487 ; infill
;WIDTH:0.391199
G1 X115.311 Y114.965 E0.00587 ; infill
;WIDTH:0.413618
G1 X115.350 Y114.918 E0.00188 ; infill
;WIDTH:0.423799
G1 X115.406 Y114.864 E0.00247 ; infill
G1 X115.571 Y114.567 E0.01075 ; infill
G1 X115.508 Y114.477 F10800.000 ; move to first infill point
;WIDTH:0.331374
G1 F2400.000
G1 X115.472 Y114.719 E0.00587 ; infill
G1 X115.244 Y115.290 E0.01473 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.472 Y114.719 E-0.16206 ; wipe and retract
G1 X115.508 Y114.477 E-0.06463 ; wipe and retract
;WIPE_END
G1 E-2.17330 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X115.780 Y112.592 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.617 Y112.696 E0.00895 ; perimeter
G1 X115.487 Y112.697 E0.00601 ; perimeter
G1 X115.245 Y112.585 E0.01235 ; perimeter
G1 X115.174 Y112.492 E0.00546 ; perimeter
G1 X115.140 Y112.363 E0.00616 ; perimeter
G1 X115.160 Y112.103 E0.01210 ; perimeter
G1 X115.228 Y111.960 E0.00732 ; perimeter
G1 X115.277 Y111.913 E0.00314 ; perimeter
G1 X115.415 Y111.846 E0.00711 ; perimeter
G1 X115.550 Y111.836 E0.00628 ; perimeter
G1 X115.714 Y111.894 E0.00806 ; perimeter
G1 X115.796 Y111.958 E0.00482 ; perimeter
G1 X115.876 Y112.108 E0.00788 ; perimeter
G1 X115.890 Y112.369 E0.01210 ; perimeter
G1 X115.807 Y112.539 E0.00874 ; perimeter
G1 X115.592 Y112.551 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.617 Y112.696 E-0.06500 ; wipe and retract
G1 X115.487 Y112.697 E-0.03423 ; wipe and retract
G1 X115.245 Y112.585 E-0.07036 ; wipe and retract
G1 X115.174 Y112.492 E-0.03111 ; wipe and retract
G1 X115.140 Y112.363 E-0.03509 ; wipe and retract
G1 X115.160 Y112.103 E-0.06893 ; wipe and retract
G1 X115.228 Y111.960 E-0.04170 ; wipe and retract
G1 X115.277 Y111.913 E-0.01791 ; wipe and retract
G1 X115.415 Y111.846 E-0.04050 ; wipe and retract
G1 X115.550 Y111.836 E-0.03576 ; wipe and retract
G1 X115.714 Y111.894 E-0.04593 ; wipe and retract
G1 X115.796 Y111.958 E-0.02748 ; wipe and retract
G1 X115.876 Y112.108 E-0.04491 ; wipe and retract
G1 X115.890 Y112.369 E-0.06895 ; wipe and retract
G1 X115.807 Y112.539 E-0.04979 ; wipe and retract
;WIPE_END
G1 E-1.72237 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 X115.628 Y105.534 ; move to first perimeter point
G1 Z16.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.311 Y105.507 E0.01478 ; perimeter
G1 X115.204 Y105.411 E0.00662 ; perimeter
G1 X115.128 Y105.180 E0.01129 ; perimeter
G1 X115.133 Y105.051 E0.00597 ; perimeter
G1 X115.216 Y104.882 E0.00872 ; perimeter
G1 X115.392 Y104.755 E0.01006 ; perimeter
G1 X115.611 Y104.744 E0.01017 ; perimeter
G1 X115.670 Y104.763 E0.00288 ; perimeter
G1 X115.792 Y104.833 E0.00651 ; perimeter
G1 X115.846 Y104.909 E0.00432 ; perimeter
G1 X115.890 Y105.033 E0.00610 ; perimeter
G1 X115.897 Y105.183 E0.00695 ; perimeter
G1 X115.847 Y105.382 E0.00949 ; perimeter
G1 X115.737 Y105.494 E0.00728 ; perimeter
G1 X115.685 Y105.514 E0.00260 ; perimeter
G1 X115.430 Y105.284 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:16.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;16.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.311 Y105.507 E-0.09877 ; wipe and retract
G1 X115.204 Y105.411 E-0.03773 ; wipe and retract
G1 X115.128 Y105.180 E-0.06434 ; wipe and retract
G1 X115.133 Y105.051 E-0.03401 ; wipe and retract
G1 X115.216 Y104.882 E-0.04967 ; wipe and retract
G1 X115.392 Y104.755 E-0.05729 ; wipe and retract
G1 X115.611 Y104.744 E-0.05795 ; wipe and retract
G1 X115.670 Y104.763 E-0.01641 ; wipe and retract
G1 X115.792 Y104.833 E-0.03707 ; wipe and retract
G1 X115.846 Y104.909 E-0.02463 ; wipe and retract
G1 X115.890 Y105.033 E-0.03476 ; wipe and retract
G1 X115.897 Y105.183 E-0.03962 ; wipe and retract
G1 X115.847 Y105.382 E-0.05404 ; wipe and retract
G1 X115.737 Y105.494 E-0.04149 ; wipe and retract
G1 X115.685 Y105.514 E-0.01480 ; wipe and retract
;WIPE_END
G1 E-1.73744 F2400.000 ; retract
G1 Z16.475 F10800.000 ; lift Z
G1 Z16.600 ; move to next layer (82)
;AFTER_LAYER_CHANGE
;16.6
G1 Z16.675 ; lift Z
G1 X100.968 Y104.614 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.194 Y104.544 E0.01095 ; perimeter
G1 X101.408 Y104.583 E0.01010 ; perimeter
G1 X101.533 Y104.682 E0.00740 ; perimeter
G1 X101.681 Y104.920 E0.01298 ; perimeter
G1 X101.755 Y105.157 E0.01149 ; perimeter
G1 X101.765 Y105.282 E0.00581 ; perimeter
G1 X101.824 Y105.509 E0.01090 ; perimeter
G1 X101.899 Y105.718 E0.01025 ; perimeter
G1 X102.066 Y106.075 E0.01829 ; perimeter
G1 X102.284 Y106.396 E0.01796 ; perimeter
G1 X102.594 Y106.701 E0.02016 ; perimeter
G1 X102.935 Y106.954 E0.01966 ; perimeter
G1 X103.230 Y107.078 E0.01482 ; perimeter
G1 X103.517 Y107.277 E0.01618 ; perimeter
G1 X103.709 Y107.514 E0.01412 ; perimeter
G1 X103.901 Y107.815 E0.01654 ; perimeter
G1 X103.959 Y108.085 E0.01279 ; perimeter
G1 X103.916 Y108.243 E0.00757 ; perimeter
G1 X103.874 Y108.273 E0.00241 ; perimeter
G1 X103.725 Y108.304 E0.00705 ; perimeter
G1 X103.458 Y108.274 E0.01242 ; perimeter
G1 X102.993 Y108.081 E0.02332 ; perimeter
G1 X102.420 Y107.636 E0.03361 ; perimeter
G1 X101.555 Y106.883 E0.05314 ; perimeter
G1 X101.345 Y106.542 E0.01856 ; perimeter
G1 X101.281 Y106.397 E0.00733 ; perimeter
G1 X100.905 Y105.158 E0.05999 ; perimeter
G1 X100.873 Y104.824 E0.01553 ; perimeter
G1 X100.943 Y104.668 E0.00790 ; perimeter
G1 X101.189 Y104.697 F10800.000 ; move inwards before travel
G1 X101.178 Y104.801 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33857
G1 F2400.000
G1 X101.308 Y105.090 E0.00780 ; infill
G1 X101.455 Y105.631 E0.01377 ; infill
;WIDTH:0.352003
G1 X101.536 Y105.875 E0.00662 ; infill
;WIDTH:0.379923
G1 X101.690 Y106.272 E0.01193 ; infill
G1 X101.892 Y106.597 E0.01072 ; infill
G1 X102.337 Y107.021 E0.01722 ; infill
;WIDTH:0.423085
G1 X102.741 Y107.340 E0.01627 ; infill
;WIDTH:0.462398
G1 X102.872 Y107.416 E0.00527 ; infill
;WIDTH:0.501709
G1 X103.002 Y107.492 E0.00576 ; infill
;WIDTH:0.514015
G1 X103.190 Y107.630 E0.00913 ; infill
G1 X103.618 Y108.049 E0.02348 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.190 Y107.630 E-0.15815 ; wipe and retract
G1 X103.002 Y107.492 E-0.06149 ; wipe and retract
;WIPE_END
G1 E-2.18036 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X100.125 Y103.359 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.024 Y103.376 E0.00475 ; perimeter
G1 X99.905 Y103.318 E0.00612 ; perimeter
G1 X99.773 Y103.335 E0.00615 ; perimeter
G1 X99.589 Y103.204 E0.01045 ; perimeter
G1 X99.467 Y103.003 E0.01090 ; perimeter
G1 X99.426 Y102.813 E0.00903 ; perimeter
G1 X99.479 Y102.583 E0.01093 ; perimeter
G1 X99.578 Y102.471 E0.00693 ; perimeter
G1 X99.688 Y102.433 E0.00536 ; perimeter
G1 X99.959 Y102.458 E0.01264 ; perimeter
G1 X100.047 Y102.507 E0.00466 ; perimeter
G1 X100.144 Y102.603 E0.00631 ; perimeter
G1 X100.209 Y102.720 E0.00623 ; perimeter
G1 X100.248 Y102.842 E0.00591 ; perimeter
G1 X100.275 Y103.082 E0.01118 ; perimeter
G1 X100.209 Y103.281 E0.00972 ; perimeter
G1 X100.169 Y103.318 E0.00254 ; perimeter
G1 X100.039 Y103.303 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.024 Y103.376 E-0.04122 ; wipe and retract
G1 X99.905 Y103.318 E-0.03486 ; wipe and retract
G1 X99.773 Y103.335 E-0.03506 ; wipe and retract
G1 X99.589 Y103.204 E-0.05951 ; wipe and retract
G1 X99.467 Y103.003 E-0.06211 ; wipe and retract
G1 X99.426 Y102.813 E-0.05145 ; wipe and retract
G1 X99.479 Y102.583 E-0.06229 ; wipe and retract
G1 X99.578 Y102.471 E-0.03949 ; wipe and retract
G1 X99.688 Y102.433 E-0.03054 ; wipe and retract
G1 X99.959 Y102.458 E-0.07202 ; wipe and retract
G1 X100.047 Y102.507 E-0.02654 ; wipe and retract
G1 X100.144 Y102.603 E-0.03594 ; wipe and retract
G1 X100.209 Y102.720 E-0.03547 ; wipe and retract
G1 X100.248 Y102.842 E-0.03366 ; wipe and retract
G1 X100.275 Y103.082 E-0.06368 ; wipe and retract
G1 X100.209 Y103.281 E-0.05538 ; wipe and retract
G1 X100.169 Y103.318 E-0.01447 ; wipe and retract
;WIPE_END
G1 E-1.64630 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X99.220 Y100.143 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X98.990 Y100.270 E0.01217 ; perimeter
G1 X98.696 Y100.199 E0.01405 ; perimeter
G1 X98.584 Y100.119 E0.00636 ; perimeter
G1 X98.516 Y99.890 E0.01107 ; perimeter
G1 X98.528 Y99.496 E0.01825 ; perimeter
G1 X98.687 Y97.582 E0.08895 ; perimeter
G1 X98.738 Y97.176 E0.01898 ; perimeter
G1 X98.888 Y96.842 E0.01692 ; perimeter
G1 X99.174 Y96.605 E0.01723 ; perimeter
G1 X99.210 Y96.603 E0.00166 ; perimeter
G1 X99.305 Y96.693 E0.00605 ; perimeter
G1 X99.467 Y96.805 E0.00911 ; perimeter
G1 X99.557 Y96.955 E0.00811 ; perimeter
G1 X99.622 Y97.228 E0.01300 ; perimeter
G1 X99.594 Y97.541 E0.01458 ; perimeter
G1 X99.537 Y97.672 E0.00661 ; perimeter
G1 X99.415 Y98.299 E0.02958 ; perimeter
G1 X99.340 Y98.886 E0.02743 ; perimeter
G1 X99.303 Y99.478 E0.02746 ; perimeter
G1 X99.310 Y99.832 E0.01641 ; perimeter
G1 X99.238 Y100.086 E0.01223 ; perimeter
G1 X98.964 Y100.084 F10800.000 ; move inwards before travel
G1 X98.906 Y100.002 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.319957
G1 F2400.000
G1 X98.917 Y99.475 E0.01214 ; infill
G1 X98.963 Y98.846 E0.01453 ; infill
;WIDTH:0.346848
G1 X99.027 Y98.231 E0.01562 ; infill
;WIDTH:0.380355
G1 X99.069 Y97.929 E0.00857 ; infill
;WIDTH:0.418059
G1 X99.121 Y97.564 E0.01150 ; infill
;WIDTH:0.425442
G1 X99.130 Y97.523 E0.00133 ; infill
;WIDTH:0.448481
G1 X99.262 Y96.947 E0.01993 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.130 Y97.523 E-0.15599 ; wipe and retract
;WIPE_END
G1 E-2.24401 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X101.102 Y94.987 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.069 Y94.834 E0.00725 ; perimeter
G1 X101.162 Y94.623 E0.01066 ; perimeter
G1 X101.240 Y94.506 E0.00654 ; perimeter
G1 X101.382 Y94.438 E0.00726 ; perimeter
G1 X101.595 Y94.404 E0.01000 ; perimeter
G1 X101.844 Y94.391 E0.01155 ; perimeter
G1 X102.066 Y94.475 E0.01100 ; perimeter
G1 X102.154 Y94.560 E0.00569 ; perimeter
G1 X102.175 Y94.798 E0.01108 ; perimeter
G1 X102.053 Y95.026 E0.01196 ; perimeter
G1 X101.926 Y95.150 E0.00824 ; perimeter
G1 X101.834 Y95.194 E0.00470 ; perimeter
G1 X101.595 Y95.209 E0.01109 ; perimeter
G1 X101.481 Y95.236 E0.00543 ; perimeter
G1 X101.353 Y95.191 E0.00630 ; perimeter
G1 X101.148 Y95.025 E0.01222 ; perimeter
G1 X101.187 Y94.856 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.069 Y94.834 E-0.05453 ; wipe and retract
G1 X101.162 Y94.623 E-0.06070 ; wipe and retract
G1 X101.240 Y94.506 E-0.03725 ; wipe and retract
G1 X101.382 Y94.438 E-0.04138 ; wipe and retract
G1 X101.595 Y94.404 E-0.05694 ; wipe and retract
G1 X101.844 Y94.391 E-0.06579 ; wipe and retract
G1 X102.066 Y94.475 E-0.06268 ; wipe and retract
G1 X102.154 Y94.560 E-0.03240 ; wipe and retract
G1 X102.175 Y94.798 E-0.06311 ; wipe and retract
G1 X102.053 Y95.026 E-0.06816 ; wipe and retract
G1 X101.926 Y95.150 E-0.04696 ; wipe and retract
G1 X101.834 Y95.194 E-0.02680 ; wipe and retract
G1 X101.595 Y95.209 E-0.06317 ; wipe and retract
G1 X101.481 Y95.236 E-0.03093 ; wipe and retract
G1 X101.353 Y95.191 E-0.03588 ; wipe and retract
G1 X101.148 Y95.025 E-0.06962 ; wipe and retract
;WIPE_END
G1 E-1.58370 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X104.452 Y94.651 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.432 Y94.516 E0.00633 ; perimeter
G1 X104.482 Y94.319 E0.00941 ; perimeter
G1 X104.641 Y94.106 E0.01231 ; perimeter
G1 X104.814 Y94.076 E0.00813 ; perimeter
G1 X105.074 Y94.099 E0.01212 ; perimeter
G1 X105.367 Y94.186 E0.01412 ; perimeter
G1 X105.528 Y94.256 E0.00813 ; perimeter
G1 X106.594 Y94.831 E0.05612 ; perimeter
G1 X106.739 Y94.872 E0.00698 ; perimeter
G1 X107.037 Y95.011 E0.01523 ; perimeter
G1 X107.216 Y95.048 E0.00846 ; perimeter
G1 X107.593 Y95.231 E0.01942 ; perimeter
G1 X107.724 Y95.364 E0.00863 ; perimeter
G1 X107.765 Y95.532 E0.00801 ; perimeter
G1 X107.738 Y95.856 E0.01507 ; perimeter
G1 X107.579 Y95.962 E0.00886 ; perimeter
G1 X107.295 Y96.011 E0.01335 ; perimeter
G1 X107.026 Y95.929 E0.01304 ; perimeter
G1 X106.428 Y95.571 E0.03228 ; perimeter
G1 X105.509 Y95.131 E0.04719 ; perimeter
G1 X105.043 Y94.939 E0.02337 ; perimeter
G1 X104.830 Y94.908 E0.00996 ; perimeter
G1 X104.603 Y94.803 E0.01157 ; perimeter
G1 X104.494 Y94.693 E0.00715 ; perimeter
G1 X104.532 Y94.540 F10800.000 ; move inwards before travel
G1 X104.862 Y94.482 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.394637
G1 F2400.000
G1 X105.131 Y94.540 E0.00804 ; infill
;WIDTH:0.300836
G1 X105.664 Y94.773 E0.01248 ; infill
G1 X106.468 Y95.180 E0.01933 ; infill
;WIDTH:0.326617
G1 X106.615 Y95.237 E0.00371 ; infill
;WIDTH:0.358682
G1 X106.894 Y95.385 E0.00829 ; infill
;WIDTH:0.366876
G1 X106.928 Y95.400 E0.00101 ; infill
;WIDTH:0.400383
G1 X107.339 Y95.576 E0.01328 ; infill
G1 X107.482 Y95.462 E0.00545 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.339 Y95.576 E-0.04835 ; wipe and retract
G1 X106.928 Y95.400 E-0.11791 ; wipe and retract
;WIPE_END
G1 E-2.23373 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X109.419 Y96.686 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.524 Y96.527 E0.00883 ; perimeter
G1 X109.743 Y96.468 E0.01050 ; perimeter
G1 X109.857 Y96.400 E0.00615 ; perimeter
G1 X109.944 Y96.383 E0.00413 ; perimeter
G1 X110.233 Y96.462 E0.01387 ; perimeter
G1 X110.361 Y96.588 E0.00834 ; perimeter
G1 X110.393 Y96.691 E0.00500 ; perimeter
G1 X110.417 Y96.897 E0.00962 ; perimeter
G1 X110.357 Y97.111 E0.01027 ; perimeter
G1 X110.206 Y97.218 E0.00857 ; perimeter
G1 X109.986 Y97.251 E0.01031 ; perimeter
G1 X109.785 Y97.244 E0.00929 ; perimeter
G1 X109.557 Y97.140 E0.01163 ; perimeter
G1 X109.484 Y97.086 E0.00419 ; perimeter
G1 X109.391 Y96.937 E0.00815 ; perimeter
G1 X109.364 Y96.842 E0.00455 ; perimeter
G1 X109.399 Y96.743 E0.00488 ; perimeter
G1 X109.609 Y96.668 F10800.000 ; move inwards before travel
G1 X111.281 Y97.368 ; move to first perimeter point
G1 F1800.000
G1 X111.428 Y97.312 E0.00725 ; perimeter
G1 X111.598 Y97.310 E0.00789 ; perimeter
G1 X111.866 Y97.413 E0.01328 ; perimeter
G1 X111.959 Y97.529 E0.00690 ; perimeter
G1 X112.064 Y97.712 E0.00978 ; perimeter
G1 X112.117 Y98.104 E0.01830 ; perimeter
G1 X112.094 Y98.536 E0.02007 ; perimeter
G1 X112.015 Y98.685 E0.00780 ; perimeter
G1 X111.971 Y99.157 E0.02198 ; perimeter
G1 X111.808 Y99.055 E0.00893 ; perimeter
G1 X111.748 Y99.047 E0.00281 ; perimeter
G1 X111.580 Y98.859 E0.01170 ; perimeter
G1 X111.442 Y98.587 E0.01410 ; perimeter
G1 X111.182 Y97.872 E0.03527 ; perimeter
G1 X111.146 Y97.644 E0.01068 ; perimeter
G1 X111.249 Y97.418 E0.01147 ; perimeter
G1 X111.429 Y97.421 F10800.000 ; move inwards before travel
G1 X111.486 Y97.553 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33354
G1 F2400.000
G1 X111.546 Y97.703 E0.00392 ; infill
;WIDTH:0.36066
G1 X111.563 Y97.724 E0.00071 ; infill
;WIDTH:0.387781
G1 X111.580 Y97.744 E0.00077 ; infill
;WIDTH:0.413811
G1 X111.597 Y97.765 E0.00081 ; infill
;WIDTH:0.422813
G1 X111.671 Y97.955 E0.00645 ; infill
G1 X111.807 Y98.564 E0.01970 ; infill
G1 X111.741 Y98.644 F10800.000 ; move to first infill point
;WIDTH:0.248607
G1 F2400.000
G1 X111.804 Y97.742 E0.01545 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.741 Y98.644 E-0.23846 ; wipe and retract
;WIPE_END
G1 E-2.16154 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X112.858 Y100.189 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.957 Y100.146 E0.00499 ; perimeter
G1 X113.048 Y100.178 E0.00442 ; perimeter
G1 X113.249 Y100.110 E0.00984 ; perimeter
G1 X113.489 Y100.213 E0.01213 ; perimeter
G1 X113.601 Y100.329 E0.00744 ; perimeter
G1 X113.671 Y100.518 E0.00937 ; perimeter
G1 X113.662 Y100.668 E0.00693 ; perimeter
G1 X113.543 Y100.863 E0.01060 ; perimeter
G1 X113.371 Y100.979 E0.00958 ; perimeter
G1 X113.222 Y101.010 E0.00707 ; perimeter
G1 X113.061 Y100.985 E0.00753 ; perimeter
G1 X112.920 Y100.903 E0.00758 ; perimeter
G1 X112.787 Y100.707 E0.01094 ; perimeter
G1 X112.730 Y100.496 E0.01012 ; perimeter
G1 X112.737 Y100.348 E0.00691 ; perimeter
G1 X112.822 Y100.236 E0.00649 ; perimeter
G1 X112.958 Y100.229 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.957 Y100.146 E-0.04294 ; wipe and retract
G1 X113.048 Y100.178 E-0.02517 ; wipe and retract
G1 X113.249 Y100.110 E-0.05603 ; wipe and retract
G1 X113.489 Y100.213 E-0.06910 ; wipe and retract
G1 X113.601 Y100.329 E-0.04238 ; wipe and retract
G1 X113.671 Y100.518 E-0.05337 ; wipe and retract
G1 X113.662 Y100.668 E-0.03946 ; wipe and retract
G1 X113.543 Y100.863 E-0.06039 ; wipe and retract
G1 X113.371 Y100.979 E-0.05460 ; wipe and retract
G1 X113.222 Y101.010 E-0.04030 ; wipe and retract
G1 X113.061 Y100.985 E-0.04289 ; wipe and retract
G1 X112.920 Y100.903 E-0.04316 ; wipe and retract
G1 X112.787 Y100.707 E-0.06230 ; wipe and retract
G1 X112.730 Y100.496 E-0.05764 ; wipe and retract
G1 X112.737 Y100.348 E-0.03934 ; wipe and retract
G1 X112.822 Y100.236 E-0.03695 ; wipe and retract
;WIPE_END
G1 E-1.63399 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X115.354 Y104.734 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.645 Y104.731 E0.01347 ; perimeter
G1 X115.795 Y104.807 E0.00778 ; perimeter
G1 X115.853 Y104.893 E0.00481 ; perimeter
G1 X115.886 Y104.988 E0.00468 ; perimeter
G1 X115.896 Y105.180 E0.00888 ; perimeter
G1 X115.846 Y105.365 E0.00889 ; perimeter
G1 X115.729 Y105.479 E0.00757 ; perimeter
G1 X115.576 Y105.520 E0.00734 ; perimeter
G1 X115.332 Y105.499 E0.01134 ; perimeter
G1 X115.209 Y105.402 E0.00726 ; perimeter
G1 X115.126 Y105.173 E0.01128 ; perimeter
G1 X115.128 Y105.033 E0.00647 ; perimeter
G1 X115.210 Y104.826 E0.01033 ; perimeter
G1 X115.304 Y104.766 E0.00513 ; perimeter
G1 X115.570 Y104.929 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.645 Y104.731 E-0.09059 ; wipe and retract
G1 X115.795 Y104.807 E-0.04430 ; wipe and retract
G1 X115.853 Y104.893 E-0.02740 ; wipe and retract
G1 X115.886 Y104.988 E-0.02666 ; wipe and retract
G1 X115.896 Y105.180 E-0.05058 ; wipe and retract
G1 X115.846 Y105.365 E-0.05066 ; wipe and retract
G1 X115.729 Y105.479 E-0.04313 ; wipe and retract
G1 X115.576 Y105.520 E-0.04181 ; wipe and retract
G1 X115.332 Y105.499 E-0.06458 ; wipe and retract
G1 X115.209 Y105.402 E-0.04138 ; wipe and retract
G1 X115.126 Y105.173 E-0.06427 ; wipe and retract
G1 X115.128 Y105.033 E-0.03686 ; wipe and retract
G1 X115.210 Y104.826 E-0.05885 ; wipe and retract
G1 X115.304 Y104.766 E-0.02924 ; wipe and retract
;WIPE_END
G1 E-1.72968 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X115.550 Y111.785 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.633 Y111.803 E0.00395 ; perimeter
G1 X115.737 Y111.858 E0.00541 ; perimeter
G1 X115.794 Y111.903 E0.00336 ; perimeter
G1 X115.863 Y112.010 E0.00591 ; perimeter
G1 X115.890 Y112.319 E0.01440 ; perimeter
G1 X115.772 Y112.546 E0.01184 ; perimeter
G1 X115.654 Y112.612 E0.00626 ; perimeter
G1 X115.453 Y112.624 E0.00933 ; perimeter
G1 X115.253 Y112.536 E0.01015 ; perimeter
G1 X115.176 Y112.426 E0.00619 ; perimeter
G1 X115.152 Y112.346 E0.00388 ; perimeter
G1 X115.160 Y112.056 E0.01347 ; perimeter
G1 X115.226 Y111.910 E0.00739 ; perimeter
G1 X115.281 Y111.859 E0.00350 ; perimeter
G1 X115.417 Y111.795 E0.00692 ; perimeter
G1 X115.490 Y111.789 E0.00342 ; perimeter
G1 X115.589 Y111.861 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.633 Y111.803 E-0.03796 ; wipe and retract
G1 X115.737 Y111.858 E-0.03084 ; wipe and retract
G1 X115.794 Y111.903 E-0.01914 ; wipe and retract
G1 X115.863 Y112.010 E-0.03368 ; wipe and retract
G1 X115.890 Y112.319 E-0.08201 ; wipe and retract
G1 X115.772 Y112.546 E-0.06744 ; wipe and retract
G1 X115.654 Y112.612 E-0.03567 ; wipe and retract
G1 X115.453 Y112.624 E-0.05314 ; wipe and retract
G1 X115.253 Y112.536 E-0.05782 ; wipe and retract
G1 X115.176 Y112.426 E-0.03526 ; wipe and retract
G1 X115.152 Y112.346 E-0.02210 ; wipe and retract
G1 X115.160 Y112.056 E-0.07675 ; wipe and retract
G1 X115.226 Y111.910 E-0.04212 ; wipe and retract
G1 X115.281 Y111.859 E-0.01992 ; wipe and retract
G1 X115.417 Y111.795 E-0.03945 ; wipe and retract
G1 X115.490 Y111.789 E-0.01950 ; wipe and retract
;WIPE_END
G1 E-1.72720 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X115.395 Y114.363 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.557 Y114.355 E0.00751 ; perimeter
G1 X115.697 Y114.402 E0.00680 ; perimeter
G1 X115.786 Y114.490 E0.00582 ; perimeter
G1 X115.854 Y114.685 E0.00958 ; perimeter
G1 X115.847 Y114.900 E0.00996 ; perimeter
G1 X115.800 Y115.061 E0.00773 ; perimeter
G1 X115.763 Y115.129 E0.00358 ; perimeter
G1 X115.616 Y115.252 E0.00891 ; perimeter
G1 X115.352 Y115.535 E0.01791 ; perimeter
G1 X115.135 Y115.829 E0.01691 ; perimeter
G1 X115.056 Y115.894 E0.00476 ; perimeter
G1 X114.898 Y115.967 E0.00806 ; perimeter
G1 X114.792 Y115.978 E0.00491 ; perimeter
G1 X114.646 Y115.939 E0.00700 ; perimeter
G1 X114.512 Y115.853 E0.00740 ; perimeter
G1 X114.462 Y115.774 E0.00430 ; perimeter
G1 X114.416 Y115.596 E0.00855 ; perimeter
G1 X114.433 Y115.415 E0.00842 ; perimeter
G1 X114.481 Y115.327 E0.00463 ; perimeter
G1 X114.874 Y114.909 E0.02656 ; perimeter
G1 X114.964 Y114.745 E0.00870 ; perimeter
G1 X115.219 Y114.467 E0.01745 ; perimeter
G1 X115.344 Y114.393 E0.00672 ; perimeter
G1 X115.512 Y114.476 F10800.000 ; move inwards before travel
G1 X115.564 Y114.612 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.399854
G1 F2400.000
G1 X115.419 Y114.870 E0.00879 ; infill
G1 X115.339 Y114.946 E0.00327 ; infill
;WIDTH:0.385472
G1 X115.201 Y115.124 E0.00643 ; infill
;WIDTH:0.342009
G1 X114.836 Y115.546 E0.01387 ; infill
G1 X112.923 Y115.652 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.929 Y115.767 E0.00531 ; perimeter
G1 X112.908 Y115.901 E0.00632 ; perimeter
G1 X112.860 Y115.993 E0.00481 ; perimeter
G1 X112.793 Y116.064 E0.00449 ; perimeter
G1 X112.699 Y116.116 E0.00498 ; perimeter
G1 X112.507 Y116.152 E0.00904 ; perimeter
G1 X112.247 Y116.123 E0.01213 ; perimeter
G1 X112.113 Y116.062 E0.00685 ; perimeter
G1 X112.014 Y115.921 E0.00796 ; perimeter
G1 X111.981 Y115.789 E0.00630 ; perimeter
G1 X112.003 Y115.617 E0.00801 ; perimeter
G1 X112.059 Y115.509 E0.00563 ; perimeter
G1 X112.246 Y115.401 E0.01001 ; perimeter
G1 X112.469 Y115.368 E0.01046 ; perimeter
G1 X112.590 Y115.380 E0.00565 ; perimeter
G1 X112.730 Y115.428 E0.00685 ; perimeter
G1 X112.833 Y115.497 E0.00573 ; perimeter
G1 X112.893 Y115.600 E0.00551 ; perimeter
G1 X112.843 Y115.734 F10800.000 ; move inwards before travel
G1 X112.561 Y115.757 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310195
G1 F2400.000
G1 X112.551 Y115.763 E0.00027 ; infill
;WIDTH:0.336591
G1 X112.361 Y115.761 E0.00464 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.551 Y115.763 E-0.05011 ; wipe and retract
;WIPE_END
G1 E-2.34989 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 X110.222 Y112.912 ; move to first perimeter point
G1 Z16.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.096 Y113.025 E0.00783 ; perimeter
G1 X109.916 Y113.102 E0.00906 ; perimeter
G1 X109.778 Y113.100 E0.00638 ; perimeter
G1 X109.549 Y113.015 E0.01129 ; perimeter
G1 X109.450 Y112.961 E0.00525 ; perimeter
G1 X109.383 Y112.891 E0.00450 ; perimeter
G1 X108.752 Y111.613 E0.06600 ; perimeter
G1 X108.539 Y111.056 E0.02763 ; perimeter
G1 X108.085 Y110.723 E0.02609 ; perimeter
G1 X107.851 Y110.681 E0.01101 ; perimeter
G1 X107.605 Y110.542 E0.01308 ; perimeter
G1 X107.496 Y110.511 E0.00525 ; perimeter
G1 X107.401 Y110.381 E0.00745 ; perimeter
G1 X107.365 Y110.169 E0.00997 ; perimeter
G1 X107.393 Y110.054 E0.00550 ; perimeter
G1 X107.452 Y109.962 E0.00506 ; perimeter
G1 X107.719 Y109.838 E0.01364 ; perimeter
G1 X107.809 Y109.828 E0.00420 ; perimeter
G1 X107.995 Y109.871 E0.00882 ; perimeter
G1 X108.111 Y109.959 E0.00674 ; perimeter
G1 X108.266 Y110.195 E0.01310 ; perimeter
G1 X108.341 Y110.374 E0.00898 ; perimeter
G1 X108.354 Y110.503 E0.00599 ; perimeter
G1 X108.429 Y110.684 E0.00910 ; perimeter
G1 X108.424 Y110.845 E0.00744 ; perimeter
G1 X108.657 Y111.085 E0.01555 ; perimeter
G1 X109.207 Y111.516 E0.03235 ; perimeter
G1 X110.113 Y112.361 E0.05737 ; perimeter
G1 X110.241 Y112.647 E0.01451 ; perimeter
G1 X110.243 Y112.859 E0.00981 ; perimeter
G1 X110.053 Y112.917 F10800.000 ; move inwards before travel
G1 X109.737 Y112.614 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.442656
G1 F2400.000
G1 X109.664 Y112.516 E0.00406 ; infill
;WIDTH:0.399258
G1 X109.591 Y112.418 E0.00362 ; infill
;WIDTH:0.355859
G1 X109.518 Y112.320 E0.00318 ; infill
;WIDTH:0.31246
G1 X109.445 Y112.222 E0.00274 ; infill
;WIDTH:0.269061
G1 X109.372 Y112.124 E0.00230 ; infill
;WIDTH:0.225662
G1 X109.299 Y112.027 E0.00186 ; infill
;WIDTH:0.182263
G1 X109.221 Y111.922 E0.00151 ; infill
;WIDTH:0.139592
G1 X109.143 Y111.816 E0.00105 ; infill
;LAYER_CHANGE
;Z:16.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;16.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.221 Y111.922 E-0.03447 ; wipe and retract
;WIPE_END
G1 E-2.36553 F2400.000 ; retract
G1 Z16.675 F10800.000 ; lift Z
G1 Z16.800 ; move to next layer (83)
;AFTER_LAYER_CHANGE
;16.8
G1 X108.190 Y110.570 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.853 Y110.651 E0.01607 ; perimeter
G1 X107.749 Y110.592 E0.00552 ; perimeter
G1 X107.490 Y110.531 E0.01233 ; perimeter
G1 X107.374 Y110.405 E0.00792 ; perimeter
G1 X107.335 Y110.145 E0.01217 ; perimeter
G1 X107.362 Y110.024 E0.00575 ; perimeter
G1 X107.403 Y109.956 E0.00366 ; perimeter
G1 X107.661 Y109.851 E0.01294 ; perimeter
G1 X107.821 Y109.855 E0.00742 ; perimeter
G1 X107.972 Y109.890 E0.00717 ; perimeter
G1 X108.064 Y109.955 E0.00520 ; perimeter
G1 X108.182 Y110.132 E0.00985 ; perimeter
G1 X108.241 Y110.433 E0.01421 ; perimeter
G1 X108.211 Y110.514 E0.00401 ; perimeter
G1 X107.866 Y110.447 F10800.000 ; move inwards before travel
G1 X109.141 Y111.804 ; move to first perimeter point
G1 F1800.000
G1 X109.280 Y111.837 E0.00662 ; perimeter
G1 X109.430 Y111.931 E0.00819 ; perimeter
G1 X109.558 Y112.048 E0.00802 ; perimeter
G1 X109.970 Y112.209 E0.02050 ; perimeter
G1 X110.203 Y112.418 E0.01450 ; perimeter
G1 X110.268 Y112.507 E0.00510 ; perimeter
G1 X110.336 Y112.687 E0.00894 ; perimeter
G1 X110.338 Y112.891 E0.00942 ; perimeter
G1 X110.277 Y112.992 E0.00544 ; perimeter
G1 X110.144 Y113.093 E0.00776 ; perimeter
G1 X109.972 Y113.151 E0.00840 ; perimeter
G1 X109.913 Y113.150 E0.00273 ; perimeter
G1 X109.760 Y113.093 E0.00755 ; perimeter
G1 X109.552 Y112.975 E0.01109 ; perimeter
G1 X109.452 Y112.860 E0.00706 ; perimeter
G1 X109.304 Y112.560 E0.01550 ; perimeter
G1 X109.131 Y111.946 E0.02953 ; perimeter
G1 X109.137 Y111.864 E0.00383 ; perimeter
G1 X109.258 Y111.886 F10800.000 ; move inwards before travel
G1 X110.077 Y112.841 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.313153
G1 F2400.000
G1 X109.805 Y112.625 E0.00781 ; infill
G1 X109.565 Y112.309 E0.00891 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.805 Y112.625 E-0.10467 ; wipe and retract
G1 X110.077 Y112.841 E-0.09169 ; wipe and retract
;WIPE_END
G1 E-2.20364 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X112.144 Y115.529 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.228 Y115.455 E0.00519 ; perimeter
G1 X112.356 Y115.396 E0.00657 ; perimeter
G1 X112.536 Y115.364 E0.00843 ; perimeter
G1 X112.702 Y115.383 E0.00776 ; perimeter
G1 X112.800 Y115.417 E0.00479 ; perimeter
G1 X112.947 Y115.510 E0.00810 ; perimeter
G1 X113.020 Y115.643 E0.00702 ; perimeter
G1 X113.028 Y115.766 E0.00571 ; perimeter
G1 X113.004 Y115.902 E0.00637 ; perimeter
G1 X112.902 Y116.052 E0.00844 ; perimeter
G1 X112.797 Y116.115 E0.00564 ; perimeter
G1 X112.595 Y116.151 E0.00952 ; perimeter
G1 X112.267 Y116.095 E0.01541 ; perimeter
G1 X112.146 Y115.991 E0.00740 ; perimeter
G1 X112.081 Y115.790 E0.00976 ; perimeter
G1 X112.117 Y115.583 E0.00975 ; perimeter
G1 X112.256 Y115.534 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.228 Y115.455 E-0.04469 ; wipe and retract
G1 X112.356 Y115.396 E-0.03741 ; wipe and retract
G1 X112.536 Y115.364 E-0.04802 ; wipe and retract
G1 X112.702 Y115.383 E-0.04418 ; wipe and retract
G1 X112.800 Y115.417 E-0.02728 ; wipe and retract
G1 X112.947 Y115.510 E-0.04616 ; wipe and retract
G1 X113.020 Y115.643 E-0.03997 ; wipe and retract
G1 X113.028 Y115.766 E-0.03255 ; wipe and retract
G1 X113.004 Y115.902 E-0.03631 ; wipe and retract
G1 X112.902 Y116.052 E-0.04808 ; wipe and retract
G1 X112.797 Y116.115 E-0.03213 ; wipe and retract
G1 X112.595 Y116.151 E-0.05425 ; wipe and retract
G1 X112.267 Y116.095 E-0.08777 ; wipe and retract
G1 X112.146 Y115.991 E-0.04216 ; wipe and retract
G1 X112.081 Y115.790 E-0.05561 ; wipe and retract
G1 X112.117 Y115.583 E-0.05555 ; wipe and retract
;WIPE_END
G1 E-1.66790 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X114.432 Y115.679 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.435 Y115.415 E0.01219 ; perimeter
G1 X114.486 Y115.325 E0.00481 ; perimeter
G1 X114.882 Y114.905 E0.02671 ; perimeter
G1 X114.929 Y114.819 E0.00456 ; perimeter
G1 X115.203 Y114.505 E0.01933 ; perimeter
G1 X115.291 Y114.487 E0.00415 ; perimeter
G1 X115.450 Y114.400 E0.00837 ; perimeter
G1 X115.531 Y114.395 E0.00377 ; perimeter
G1 X115.677 Y114.447 E0.00717 ; perimeter
G1 X115.794 Y114.556 E0.00745 ; perimeter
G1 X115.850 Y114.703 E0.00725 ; perimeter
G1 X115.840 Y114.943 E0.01113 ; perimeter
G1 X115.802 Y115.057 E0.00556 ; perimeter
G1 X115.763 Y115.129 E0.00383 ; perimeter
G1 X115.642 Y115.230 E0.00728 ; perimeter
G1 X115.374 Y115.520 E0.01829 ; perimeter
G1 X115.141 Y115.828 E0.01788 ; perimeter
G1 X115.060 Y115.895 E0.00490 ; perimeter
G1 X114.906 Y115.964 E0.00780 ; perimeter
G1 X114.792 Y115.975 E0.00531 ; perimeter
G1 X114.649 Y115.938 E0.00681 ; perimeter
G1 X114.497 Y115.836 E0.00848 ; perimeter
G1 X114.454 Y115.734 E0.00512 ; perimeter
G1 X114.625 Y115.500 F10800.000 ; move inwards before travel
G1 X114.678 Y115.644 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334273
G1 F2400.000
G1 X114.810 Y115.580 E0.00356 ; infill
;WIDTH:0.344371
G1 X115.210 Y115.121 E0.01527 ; infill
;WIDTH:0.371204
G1 X115.370 Y114.930 E0.00680 ; infill
;WIDTH:0.382496
G1 X115.422 Y114.879 E0.00206 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.370 Y114.930 E-0.01923 ; wipe and retract
;WIPE_END
G1 E-2.38077 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X115.225 Y111.860 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.286 Y111.804 E0.00382 ; perimeter
G1 X115.420 Y111.742 E0.00683 ; perimeter
G1 X115.540 Y111.732 E0.00560 ; perimeter
G1 X115.652 Y111.756 E0.00528 ; perimeter
G1 X115.807 Y111.863 E0.00873 ; perimeter
G1 X115.852 Y111.930 E0.00375 ; perimeter
G1 X115.887 Y112.062 E0.00632 ; perimeter
G1 X115.891 Y112.270 E0.00964 ; perimeter
G1 X115.811 Y112.452 E0.00922 ; perimeter
G1 X115.673 Y112.554 E0.00793 ; perimeter
G1 X115.563 Y112.580 E0.00522 ; perimeter
G1 X115.415 Y112.573 E0.00689 ; perimeter
G1 X115.262 Y112.494 E0.00797 ; perimeter
G1 X115.162 Y112.325 E0.00912 ; perimeter
G1 X115.157 Y112.019 E0.01416 ; perimeter
G1 X115.202 Y111.915 E0.00523 ; perimeter
G1 X115.308 Y111.866 F10800.000 ; move inwards before travel
G1 X115.518 Y112.224 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.279445
G1 F2400.000
G1 X115.512 Y112.090 E0.00263 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.518 Y112.224 E-0.03533 ; wipe and retract
;WIPE_END
G1 E-2.36467 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X115.601 Y105.500 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.329 Y105.477 E0.01266 ; perimeter
G1 X115.209 Y105.380 E0.00715 ; perimeter
G1 X115.121 Y105.150 E0.01142 ; perimeter
G1 X115.119 Y104.949 E0.00932 ; perimeter
G1 X115.169 Y104.817 E0.00653 ; perimeter
G1 X115.212 Y104.754 E0.00354 ; perimeter
G1 X115.347 Y104.678 E0.00719 ; perimeter
G1 X115.472 Y104.654 E0.00586 ; perimeter
G1 X115.618 Y104.669 E0.00682 ; perimeter
G1 X115.789 Y104.766 E0.00911 ; perimeter
G1 X115.861 Y104.878 E0.00616 ; perimeter
G1 X115.881 Y104.936 E0.00281 ; perimeter
G1 X115.895 Y105.177 E0.01119 ; perimeter
G1 X115.852 Y105.322 E0.00703 ; perimeter
G1 X115.707 Y105.474 E0.00974 ; perimeter
G1 X115.660 Y105.486 E0.00225 ; perimeter
G1 X115.431 Y105.287 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.329 Y105.477 E-0.08724 ; wipe and retract
G1 X115.209 Y105.380 E-0.04072 ; wipe and retract
G1 X115.121 Y105.150 E-0.06505 ; wipe and retract
G1 X115.119 Y104.949 E-0.05311 ; wipe and retract
G1 X115.169 Y104.817 E-0.03720 ; wipe and retract
G1 X115.212 Y104.754 E-0.02015 ; wipe and retract
G1 X115.347 Y104.678 E-0.04094 ; wipe and retract
G1 X115.472 Y104.654 E-0.03341 ; wipe and retract
G1 X115.618 Y104.669 E-0.03886 ; wipe and retract
G1 X115.789 Y104.766 E-0.05190 ; wipe and retract
G1 X115.861 Y104.878 E-0.03510 ; wipe and retract
G1 X115.881 Y104.936 E-0.01602 ; wipe and retract
G1 X115.895 Y105.177 E-0.06373 ; wipe and retract
G1 X115.852 Y105.322 E-0.04003 ; wipe and retract
G1 X115.707 Y105.474 E-0.05550 ; wipe and retract
G1 X115.660 Y105.486 E-0.01282 ; wipe and retract
;WIPE_END
G1 E-1.70822 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X113.450 Y100.935 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.275 Y100.965 E0.00823 ; perimeter
G1 X113.109 Y100.942 E0.00776 ; perimeter
G1 X112.956 Y100.841 E0.00851 ; perimeter
G1 X112.855 Y100.680 E0.00880 ; perimeter
G1 X112.831 Y100.564 E0.00547 ; perimeter
G1 X112.858 Y100.459 E0.00506 ; perimeter
G1 X112.856 Y100.333 E0.00580 ; perimeter
G1 X112.910 Y100.238 E0.00508 ; perimeter
G1 X113.034 Y100.166 E0.00661 ; perimeter
G1 X113.263 Y100.090 E0.01119 ; perimeter
G1 X113.402 Y100.114 E0.00653 ; perimeter
G1 X113.555 Y100.184 E0.00779 ; perimeter
G1 X113.653 Y100.283 E0.00648 ; perimeter
G1 X113.727 Y100.469 E0.00924 ; perimeter
G1 X113.720 Y100.628 E0.00739 ; perimeter
G1 X113.614 Y100.811 E0.00982 ; perimeter
G1 X113.502 Y100.904 E0.00674 ; perimeter
G1 X113.309 Y100.827 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.275 Y100.965 E-0.06189 ; wipe and retract
G1 X113.109 Y100.942 E-0.04420 ; wipe and retract
G1 X112.956 Y100.841 E-0.04850 ; wipe and retract
G1 X112.855 Y100.680 E-0.05012 ; wipe and retract
G1 X112.831 Y100.564 E-0.03115 ; wipe and retract
G1 X112.858 Y100.459 E-0.02881 ; wipe and retract
G1 X112.856 Y100.333 E-0.03307 ; wipe and retract
G1 X112.910 Y100.238 E-0.02893 ; wipe and retract
G1 X113.034 Y100.166 E-0.03767 ; wipe and retract
G1 X113.263 Y100.090 E-0.06376 ; wipe and retract
G1 X113.402 Y100.114 E-0.03723 ; wipe and retract
G1 X113.555 Y100.184 E-0.04439 ; wipe and retract
G1 X113.653 Y100.283 E-0.03690 ; wipe and retract
G1 X113.727 Y100.469 E-0.05263 ; wipe and retract
G1 X113.720 Y100.628 E-0.04210 ; wipe and retract
G1 X113.614 Y100.811 E-0.05596 ; wipe and retract
G1 X113.502 Y100.904 E-0.03842 ; wipe and retract
;WIPE_END
G1 E-1.66428 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X111.143 Y97.484 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.241 Y97.344 E0.00789 ; perimeter
G1 X111.481 Y97.239 E0.01215 ; perimeter
G1 X111.651 Y97.255 E0.00791 ; perimeter
G1 X111.750 Y97.283 E0.00476 ; perimeter
G1 X111.867 Y97.376 E0.00692 ; perimeter
G1 X112.045 Y97.634 E0.01449 ; perimeter
G1 X112.081 Y97.881 E0.01159 ; perimeter
G1 X112.052 Y98.201 E0.01490 ; perimeter
G1 X111.841 Y98.603 E0.02101 ; perimeter
G1 X111.792 Y98.651 E0.00319 ; perimeter
G1 X111.714 Y98.639 E0.00362 ; perimeter
G1 X111.507 Y98.434 E0.01350 ; perimeter
G1 X111.211 Y97.815 E0.03175 ; perimeter
G1 X111.162 Y97.541 E0.01293 ; perimeter
G1 X111.309 Y97.444 F10800.000 ; move inwards before travel
G1 X110.502 Y97.017 ; move to first perimeter point
G1 F1800.000
G1 X110.249 Y97.189 E0.01415 ; perimeter
G1 X109.888 Y97.205 E0.01675 ; perimeter
G1 X109.692 Y97.113 E0.01003 ; perimeter
G1 X109.522 Y96.879 E0.01337 ; perimeter
G1 X109.550 Y96.729 E0.00709 ; perimeter
G1 X109.680 Y96.563 E0.00976 ; perimeter
G1 X109.720 Y96.480 E0.00425 ; perimeter
G1 X109.899 Y96.371 E0.00970 ; perimeter
G1 X110.046 Y96.348 E0.00688 ; perimeter
G1 X110.265 Y96.401 E0.01045 ; perimeter
G1 X110.422 Y96.524 E0.00926 ; perimeter
G1 X110.509 Y96.810 E0.01384 ; perimeter
G1 X110.504 Y96.957 E0.00684 ; perimeter
G1 X110.197 Y96.995 F10800.000 ; move inwards before travel
G1 X110.037 Y96.770 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.405421
G1 F2400.000
G1 X110.063 Y96.784 E0.00086 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.037 Y96.770 E-0.00755 ; wipe and retract
;WIPE_END
G1 E-2.39245 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X107.796 Y95.843 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.665 Y95.939 E0.00756 ; perimeter
G1 X107.331 Y95.980 E0.01557 ; perimeter
G1 X107.117 Y95.919 E0.01029 ; perimeter
G1 X106.208 Y95.412 E0.04823 ; perimeter
G1 X105.664 Y95.147 E0.02801 ; perimeter
G1 X104.744 Y94.815 E0.04532 ; perimeter
G1 X104.585 Y94.651 E0.01060 ; perimeter
G1 X104.533 Y94.480 E0.00824 ; perimeter
G1 X104.555 Y94.374 E0.00502 ; perimeter
G1 X104.671 Y94.210 E0.00930 ; perimeter
G1 X104.720 Y94.180 E0.00268 ; perimeter
G1 X104.773 Y94.103 E0.00431 ; perimeter
G1 X104.924 Y94.075 E0.00711 ; perimeter
G1 X105.080 Y94.089 E0.00723 ; perimeter
G1 X105.350 Y94.170 E0.01307 ; perimeter
G1 X105.469 Y94.221 E0.00602 ; perimeter
G1 X105.862 Y94.488 E0.02201 ; perimeter
G1 X106.650 Y94.883 E0.04080 ; perimeter
G1 X106.981 Y94.977 E0.01595 ; perimeter
G1 X107.109 Y95.036 E0.00652 ; perimeter
G1 X107.435 Y95.102 E0.01539 ; perimeter
G1 X107.717 Y95.235 E0.01446 ; perimeter
G1 X107.825 Y95.339 E0.00695 ; perimeter
G1 X107.885 Y95.513 E0.00855 ; perimeter
G1 X107.812 Y95.785 E0.01301 ; perimeter
G1 X107.634 Y95.823 F10800.000 ; move inwards before travel
G1 X107.603 Y95.633 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.430911
G1 F2400.000
G1 X107.144 Y95.463 E0.01579 ; infill
;WIDTH:0.383673
G1 X107.004 Y95.411 E0.00424 ; infill
;WIDTH:0.337422
G1 X106.848 Y95.334 E0.00426 ; infill
;WIDTH:0.320793
G1 X106.692 Y95.269 E0.00391 ; infill
;WIDTH:0.281378
G1 X106.535 Y95.204 E0.00336 ; infill
;WIDTH:0.241961
G1 X106.365 Y95.115 E0.00317 ; infill
;WIDTH:0.231727
G1 X105.545 Y94.715 E0.01433 ; infill
;WIDTH:0.330711
G1 X105.273 Y94.577 E0.00729 ; infill
G1 X104.989 Y94.480 E0.00719 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.273 Y94.577 E-0.07934 ; wipe and retract
G1 X105.545 Y94.715 E-0.08044 ; wipe and retract
;WIPE_END
G1 E-2.24022 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X102.149 Y94.815 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.061 Y95.081 E0.01297 ; perimeter
G1 X102.001 Y95.140 E0.00389 ; perimeter
G1 X101.825 Y95.227 E0.00912 ; perimeter
G1 X101.540 Y95.287 E0.01349 ; perimeter
G1 X101.435 Y95.248 E0.00517 ; perimeter
G1 X101.367 Y95.248 E0.00315 ; perimeter
G1 X101.242 Y95.153 E0.00729 ; perimeter
G1 X101.207 Y95.082 E0.00365 ; perimeter
G1 X101.212 Y94.884 E0.00918 ; perimeter
G1 X101.194 Y94.811 E0.00350 ; perimeter
G1 X101.229 Y94.655 E0.00741 ; perimeter
G1 X101.376 Y94.522 E0.00920 ; perimeter
G1 X101.541 Y94.439 E0.00853 ; perimeter
G1 X101.791 Y94.425 E0.01161 ; perimeter
G1 X101.990 Y94.508 E0.01000 ; perimeter
G1 X102.103 Y94.621 E0.00740 ; perimeter
G1 X102.135 Y94.757 E0.00647 ; perimeter
G1 X101.899 Y94.942 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.061 Y95.081 E-0.08775 ; wipe and retract
G1 X102.001 Y95.140 E-0.02215 ; wipe and retract
G1 X101.825 Y95.227 E-0.05198 ; wipe and retract
G1 X101.540 Y95.287 E-0.07685 ; wipe and retract
G1 X101.435 Y95.248 E-0.02945 ; wipe and retract
G1 X101.367 Y95.248 E-0.01794 ; wipe and retract
G1 X101.242 Y95.153 E-0.04154 ; wipe and retract
G1 X101.207 Y95.082 E-0.02081 ; wipe and retract
G1 X101.212 Y94.884 E-0.05231 ; wipe and retract
G1 X101.194 Y94.811 E-0.01994 ; wipe and retract
G1 X101.229 Y94.655 E-0.04223 ; wipe and retract
G1 X101.376 Y94.522 E-0.05239 ; wipe and retract
G1 X101.541 Y94.439 E-0.04860 ; wipe and retract
G1 X101.791 Y94.425 E-0.06612 ; wipe and retract
G1 X101.990 Y94.508 E-0.05698 ; wipe and retract
G1 X102.103 Y94.621 E-0.04213 ; wipe and retract
G1 X102.135 Y94.757 E-0.03684 ; wipe and retract
;WIPE_END
G1 E-1.63397 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X99.319 Y96.689 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.536 Y96.817 E0.01168 ; perimeter
G1 X99.666 Y96.993 E0.01014 ; perimeter
G1 X99.699 Y97.124 E0.00625 ; perimeter
G1 X99.672 Y97.397 E0.01270 ; perimeter
G1 X99.531 Y97.699 E0.01542 ; perimeter
G1 X99.432 Y98.007 E0.01502 ; perimeter
G1 X99.357 Y98.133 E0.00677 ; perimeter
G1 X99.267 Y99.054 E0.04286 ; perimeter
G1 X99.300 Y99.146 E0.00453 ; perimeter
G1 X99.285 Y99.427 E0.01305 ; perimeter
G1 X99.309 Y99.768 E0.01583 ; perimeter
G1 X99.212 Y100.054 E0.01400 ; perimeter
G1 X98.972 Y100.189 E0.01272 ; perimeter
G1 X98.736 Y100.144 E0.01116 ; perimeter
G1 X98.607 Y100.065 E0.00701 ; perimeter
G1 X98.536 Y99.885 E0.00893 ; perimeter
G1 X98.538 Y99.526 E0.01663 ; perimeter
G1 X98.573 Y99.133 E0.01830 ; perimeter
G1 X98.675 Y98.812 E0.01557 ; perimeter
G1 X98.706 Y98.107 E0.03273 ; perimeter
G1 X98.806 Y97.161 E0.04404 ; perimeter
G1 X98.921 Y96.902 E0.01314 ; perimeter
G1 X99.072 Y96.774 E0.00915 ; perimeter
G1 X99.215 Y96.685 E0.00781 ; perimeter
G1 X99.259 Y96.687 E0.00202 ; perimeter
G1 X99.388 Y96.932 F10800.000 ; move inwards before travel
G1 X99.291 Y96.953 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.367684
G1 F2400.000
G1 X99.267 Y97.169 E0.00588 ; infill
G1 X99.165 Y97.544 E0.01050 ; infill
;WIDTH:0.355218
G1 X99.129 Y97.710 E0.00440 ; infill
;WIDTH:0.319049
G1 X99.098 Y97.856 E0.00344 ; infill
G1 X99.047 Y98.011 F10800.000 ; move to first infill point
;WIDTH:0.21828
G1 F2400.000
G1 X99.039 Y98.048 E0.00055 ; infill
;WIDTH:0.210904
G1 X98.979 Y98.858 E0.01135 ; infill
;WIDTH:0.173281
G1 X98.935 Y99.076 E0.00241 ; infill
G1 X98.859 Y99.922 E0.00920 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.935 Y99.076 E-0.22409 ; wipe and retract
G1 X98.979 Y98.858 E-0.05875 ; wipe and retract
;WIPE_END
G1 E-2.11716 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 X101.471 Y104.533 ; move to first perimeter point
G1 Z16.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.656 Y104.827 E0.01607 ; perimeter
G1 X101.731 Y105.076 E0.01207 ; perimeter
G1 X101.752 Y105.330 E0.01178 ; perimeter
G1 X101.861 Y105.728 E0.01913 ; perimeter
G1 X102.286 Y106.443 E0.03851 ; perimeter
G1 X102.570 Y106.757 E0.01963 ; perimeter
G1 X102.736 Y106.890 E0.00986 ; perimeter
G1 X102.966 Y107.061 E0.01328 ; perimeter
G1 X103.101 Y107.118 E0.00680 ; perimeter
G1 X103.508 Y107.373 E0.02221 ; perimeter
G1 X103.645 Y107.536 E0.00988 ; perimeter
G1 X103.787 Y107.612 E0.00746 ; perimeter
G1 X103.911 Y107.731 E0.00796 ; perimeter
G1 X104.085 Y107.931 E0.01228 ; perimeter
G1 X104.214 Y108.196 E0.01364 ; perimeter
G1 X104.245 Y108.346 E0.00710 ; perimeter
G1 X104.234 Y108.386 E0.00194 ; perimeter
G1 X104.106 Y108.451 E0.00665 ; perimeter
G1 X103.916 Y108.464 E0.00882 ; perimeter
G1 X103.789 Y108.450 E0.00591 ; perimeter
G1 X103.449 Y108.347 E0.01648 ; perimeter
G1 X103.124 Y108.173 E0.01705 ; perimeter
G1 X101.983 Y107.279 E0.06716 ; perimeter
G1 X101.527 Y106.864 E0.02854 ; perimeter
G1 X101.319 Y106.547 E0.01757 ; perimeter
G1 X101.126 Y105.803 E0.03561 ; perimeter
G1 X100.909 Y105.143 E0.03222 ; perimeter
G1 X100.816 Y104.941 E0.01030 ; perimeter
G1 X100.801 Y104.626 E0.01459 ; perimeter
G1 X100.766 Y104.545 E0.00412 ; perimeter
G1 X100.862 Y104.243 E0.01466 ; perimeter
G1 X100.941 Y104.295 E0.00439 ; perimeter
G1 X101.146 Y104.360 E0.00996 ; perimeter
G1 X101.423 Y104.497 E0.01431 ; perimeter
G1 X101.372 Y104.865 F10800.000 ; move inwards before travel
G1 X100.301 Y103.341 ; move to first perimeter point
G1 F1800.000
G1 X100.392 Y103.607 E0.01304 ; perimeter
G1 X100.182 Y103.602 E0.00976 ; perimeter
G1 X100.062 Y103.560 E0.00589 ; perimeter
G1 X99.877 Y103.471 E0.00950 ; perimeter
G1 X99.631 Y103.288 E0.01418 ; perimeter
G1 X99.519 Y103.102 E0.01007 ; perimeter
G1 X99.470 Y102.901 E0.00960 ; perimeter
G1 X99.516 Y102.683 E0.01030 ; perimeter
G1 X99.621 Y102.578 E0.00690 ; perimeter
G1 X99.818 Y102.515 E0.00958 ; perimeter
G1 X99.973 Y102.533 E0.00723 ; perimeter
G1 X100.096 Y102.585 E0.00619 ; perimeter
G1 X100.160 Y102.643 E0.00398 ; perimeter
G1 X100.232 Y102.762 E0.00646 ; perimeter
G1 X100.321 Y102.987 E0.01118 ; perimeter
G1 X100.348 Y103.175 E0.00882 ; perimeter
G1 X100.317 Y103.283 E0.00521 ; perimeter
G1 X100.090 Y103.528 F10800.000 ; move inwards before travel
G1 X101.082 Y104.595 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.296814
G1 F2400.000
G1 X101.284 Y104.993 E0.00943 ; infill
G1 X101.528 Y105.888 E0.01957 ; infill
;WIDTH:0.345374
G1 X101.594 Y106.047 E0.00434 ; infill
;WIDTH:0.393934
G1 X101.661 Y106.207 E0.00504 ; infill
;WIDTH:0.431023
G1 X101.727 Y106.366 E0.00557 ; infill
G1 X101.940 Y106.676 E0.01213 ; infill
;WIDTH:0.331435
G1 X102.295 Y107.032 E0.01206 ; infill
G1 X102.503 Y107.197 E0.00636 ; infill
;WIDTH:0.339345
G1 X102.757 Y107.391 E0.00789 ; infill
;WIDTH:0.350767
G1 X103.222 Y107.702 E0.01431 ; infill
G1 X103.361 Y107.835 E0.00494 ; infill
G1 X103.937 Y108.177 E0.01713 ; infill
;LAYER_CHANGE
;Z:17
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;17
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.361 Y107.835 E-0.17659 ; wipe and retract
G1 X103.222 Y107.702 E-0.05098 ; wipe and retract
G1 X102.757 Y107.391 E-0.14747 ; wipe and retract
;WIPE_END
G1 E-2.02496 F2400.000 ; retract
G1 Z16.875 F10800.000 ; lift Z
G1 Z17.000 ; move to next layer (84)
;AFTER_LAYER_CHANGE
;17
G1 Z17.075 ; lift Z
G1 X107.309 Y110.026 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.351 Y109.953 E0.00390 ; perimeter
G1 X107.494 Y109.888 E0.00729 ; perimeter
G1 X107.659 Y109.855 E0.00778 ; perimeter
G1 X107.938 Y109.895 E0.01309 ; perimeter
G1 X108.015 Y109.947 E0.00428 ; perimeter
G1 X108.141 Y110.134 E0.01046 ; perimeter
G1 X108.167 Y110.266 E0.00622 ; perimeter
G1 X108.136 Y110.399 E0.00631 ; perimeter
G1 X108.144 Y110.438 E0.00184 ; perimeter
G1 X108.056 Y110.532 E0.00595 ; perimeter
G1 X107.746 Y110.609 E0.01481 ; perimeter
G1 X107.459 Y110.541 E0.01365 ; perimeter
G1 X107.308 Y110.398 E0.00965 ; perimeter
G1 X107.243 Y110.138 E0.01239 ; perimeter
G1 X107.278 Y110.078 E0.00325 ; perimeter
G1 X107.391 Y110.011 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.351 Y109.953 E-0.03804 ; wipe and retract
G1 X107.494 Y109.888 E-0.04151 ; wipe and retract
G1 X107.659 Y109.855 E-0.04432 ; wipe and retract
G1 X107.938 Y109.895 E-0.07457 ; wipe and retract
G1 X108.015 Y109.947 E-0.02440 ; wipe and retract
G1 X108.141 Y110.134 E-0.05956 ; wipe and retract
G1 X108.167 Y110.266 E-0.03544 ; wipe and retract
G1 X108.136 Y110.399 E-0.03594 ; wipe and retract
G1 X108.144 Y110.438 E-0.01050 ; wipe and retract
G1 X108.056 Y110.532 E-0.03390 ; wipe and retract
G1 X107.746 Y110.609 E-0.08438 ; wipe and retract
G1 X107.459 Y110.541 E-0.07774 ; wipe and retract
G1 X107.308 Y110.398 E-0.05496 ; wipe and retract
G1 X107.243 Y110.138 E-0.07058 ; wipe and retract
G1 X107.278 Y110.078 E-0.01852 ; wipe and retract
;WIPE_END
G1 E-1.69563 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X109.447 Y112.275 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.673 Y112.227 E0.01069 ; perimeter
G1 X109.882 Y112.304 E0.01031 ; perimeter
G1 X109.992 Y112.303 E0.00512 ; perimeter
G1 X110.175 Y112.389 E0.00934 ; perimeter
G1 X110.295 Y112.487 E0.00719 ; perimeter
G1 X110.390 Y112.622 E0.00766 ; perimeter
G1 X110.431 Y112.735 E0.00557 ; perimeter
G1 X110.433 Y112.893 E0.00732 ; perimeter
G1 X110.307 Y113.117 E0.01191 ; perimeter
G1 X110.248 Y113.154 E0.00321 ; perimeter
G1 X110.028 Y113.196 E0.01039 ; perimeter
G1 X109.809 Y113.124 E0.01068 ; perimeter
G1 X109.640 Y112.999 E0.00972 ; perimeter
G1 X109.542 Y112.865 E0.00768 ; perimeter
G1 X109.457 Y112.619 E0.01208 ; perimeter
G1 X109.487 Y112.514 E0.00504 ; perimeter
G1 X109.457 Y112.334 E0.00846 ; perimeter
G1 X109.662 Y112.360 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.673 Y112.227 E-0.06363 ; wipe and retract
G1 X109.882 Y112.304 E-0.05876 ; wipe and retract
G1 X109.992 Y112.303 E-0.02917 ; wipe and retract
G1 X110.175 Y112.389 E-0.05323 ; wipe and retract
G1 X110.295 Y112.487 E-0.04094 ; wipe and retract
G1 X110.390 Y112.622 E-0.04362 ; wipe and retract
G1 X110.431 Y112.735 E-0.03172 ; wipe and retract
G1 X110.433 Y112.893 E-0.04173 ; wipe and retract
G1 X110.307 Y113.117 E-0.06783 ; wipe and retract
G1 X110.248 Y113.154 E-0.01826 ; wipe and retract
G1 X110.028 Y113.196 E-0.05921 ; wipe and retract
G1 X109.809 Y113.124 E-0.06085 ; wipe and retract
G1 X109.640 Y112.999 E-0.05536 ; wipe and retract
G1 X109.542 Y112.865 E-0.04374 ; wipe and retract
G1 X109.457 Y112.619 E-0.06881 ; wipe and retract
G1 X109.487 Y112.514 E-0.02870 ; wipe and retract
G1 X109.457 Y112.334 E-0.04820 ; wipe and retract
;WIPE_END
G1 E-1.58626 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X112.324 Y115.456 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.463 Y115.393 E0.00706 ; perimeter
G1 X112.635 Y115.363 E0.00810 ; perimeter
G1 X112.814 Y115.385 E0.00834 ; perimeter
G1 X113.045 Y115.504 E0.01204 ; perimeter
G1 X113.119 Y115.650 E0.00761 ; perimeter
G1 X113.127 Y115.766 E0.00537 ; perimeter
G1 X113.101 Y115.901 E0.00639 ; perimeter
G1 X113.031 Y116.020 E0.00639 ; perimeter
G1 X112.896 Y116.113 E0.00759 ; perimeter
G1 X112.671 Y116.151 E0.01060 ; perimeter
G1 X112.368 Y116.097 E0.01426 ; perimeter
G1 X112.312 Y116.064 E0.00300 ; perimeter
G1 X112.250 Y115.992 E0.00439 ; perimeter
G1 X112.183 Y115.800 E0.00940 ; perimeter
G1 X112.215 Y115.577 E0.01048 ; perimeter
G1 X112.280 Y115.497 E0.00477 ; perimeter
G1 X112.466 Y115.511 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.463 Y115.393 E-0.05546 ; wipe and retract
G1 X112.635 Y115.363 E-0.04616 ; wipe and retract
G1 X112.814 Y115.385 E-0.04754 ; wipe and retract
G1 X113.045 Y115.504 E-0.06860 ; wipe and retract
G1 X113.119 Y115.650 E-0.04334 ; wipe and retract
G1 X113.127 Y115.766 E-0.03059 ; wipe and retract
G1 X113.101 Y115.901 E-0.03638 ; wipe and retract
G1 X113.031 Y116.020 E-0.03638 ; wipe and retract
G1 X112.896 Y116.113 E-0.04322 ; wipe and retract
G1 X112.671 Y116.151 E-0.06039 ; wipe and retract
G1 X112.368 Y116.097 E-0.08124 ; wipe and retract
G1 X112.312 Y116.064 E-0.01707 ; wipe and retract
G1 X112.250 Y115.992 E-0.02501 ; wipe and retract
G1 X112.183 Y115.800 E-0.05356 ; wipe and retract
G1 X112.215 Y115.577 E-0.05969 ; wipe and retract
G1 X112.280 Y115.497 E-0.02717 ; wipe and retract
;WIPE_END
G1 E-1.66822 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X114.435 Y115.673 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.438 Y115.416 E0.01189 ; perimeter
G1 X114.492 Y115.321 E0.00503 ; perimeter
G1 X114.869 Y114.923 E0.02541 ; perimeter
G1 X115.222 Y114.504 E0.02542 ; perimeter
G1 X115.449 Y114.457 E0.01072 ; perimeter
G1 X115.498 Y114.430 E0.00260 ; perimeter
G1 X115.667 Y114.492 E0.00830 ; perimeter
G1 X115.802 Y114.618 E0.00857 ; perimeter
G1 X115.847 Y114.727 E0.00545 ; perimeter
G1 X115.845 Y114.928 E0.00933 ; perimeter
G1 X115.802 Y115.057 E0.00629 ; perimeter
G1 X115.762 Y115.130 E0.00386 ; perimeter
G1 X115.396 Y115.505 E0.02429 ; perimeter
G1 X115.148 Y115.828 E0.01886 ; perimeter
G1 X115.063 Y115.896 E0.00503 ; perimeter
G1 X114.914 Y115.961 E0.00755 ; perimeter
G1 X114.791 Y115.972 E0.00571 ; perimeter
G1 X114.652 Y115.937 E0.00662 ; perimeter
G1 X114.503 Y115.832 E0.00844 ; perimeter
G1 X114.459 Y115.728 E0.00525 ; perimeter
G1 X114.624 Y115.499 F10800.000 ; move inwards before travel
G1 X114.820 Y115.575 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343365
G1 F2400.000
G1 X115.163 Y115.180 E0.01307 ; infill
;WIDTH:0.357612
G1 X115.386 Y114.928 E0.00882 ; infill
;WIDTH:0.366117
G1 X115.583 Y114.743 E0.00725 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.386 Y114.928 E-0.07119 ; wipe and retract
;WIPE_END
G1 E-2.32881 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X115.175 Y112.316 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.159 Y111.972 E0.01596 ; perimeter
G1 X115.226 Y111.809 E0.00818 ; perimeter
G1 X115.281 Y111.756 E0.00353 ; perimeter
G1 X115.421 Y111.692 E0.00713 ; perimeter
G1 X115.551 Y111.683 E0.00604 ; perimeter
G1 X115.656 Y111.705 E0.00498 ; perimeter
G1 X115.797 Y111.802 E0.00790 ; perimeter
G1 X115.845 Y111.869 E0.00381 ; perimeter
G1 X115.899 Y112.102 E0.01112 ; perimeter
G1 X115.894 Y112.210 E0.00500 ; perimeter
G1 X115.812 Y112.397 E0.00944 ; perimeter
G1 X115.716 Y112.483 E0.00597 ; perimeter
G1 X115.511 Y112.531 E0.00974 ; perimeter
G1 X115.423 Y112.521 E0.00408 ; perimeter
G1 X115.264 Y112.442 E0.00825 ; perimeter
G1 X115.210 Y112.365 E0.00434 ; perimeter
G1 X115.403 Y112.058 F10800.000 ; move inwards before travel
G1 X115.537 Y112.110 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.283708
G1 F2400.000
G1 X115.532 Y112.074 E0.00071 ; infill
;WIDTH:0.273952
G1 X115.520 Y112.035 E0.00079 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.532 Y112.074 E-0.01086 ; wipe and retract
;WIPE_END
G1 E-2.38914 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X115.606 Y105.489 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.341 Y105.459 E0.01235 ; perimeter
G1 X115.209 Y105.357 E0.00771 ; perimeter
G1 X115.118 Y105.164 E0.00987 ; perimeter
G1 X115.090 Y104.926 E0.01113 ; perimeter
G1 X115.124 Y104.820 E0.00515 ; perimeter
G1 X115.228 Y104.666 E0.00861 ; perimeter
G1 X115.337 Y104.597 E0.00597 ; perimeter
G1 X115.630 Y104.596 E0.01356 ; perimeter
G1 X115.791 Y104.738 E0.00995 ; perimeter
G1 X115.868 Y104.864 E0.00686 ; perimeter
G1 X115.894 Y105.170 E0.01423 ; perimeter
G1 X115.844 Y105.320 E0.00728 ; perimeter
G1 X115.693 Y105.468 E0.00977 ; perimeter
G1 X115.664 Y105.475 E0.00139 ; perimeter
G1 X115.444 Y105.277 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.341 Y105.459 E-0.08541 ; wipe and retract
G1 X115.209 Y105.357 E-0.04395 ; wipe and retract
G1 X115.118 Y105.164 E-0.05625 ; wipe and retract
G1 X115.090 Y104.926 E-0.06339 ; wipe and retract
G1 X115.124 Y104.820 E-0.02935 ; wipe and retract
G1 X115.228 Y104.666 E-0.04902 ; wipe and retract
G1 X115.337 Y104.597 E-0.03403 ; wipe and retract
G1 X115.630 Y104.596 E-0.07724 ; wipe and retract
G1 X115.791 Y104.738 E-0.05671 ; wipe and retract
G1 X115.868 Y104.864 E-0.03908 ; wipe and retract
G1 X115.894 Y105.170 E-0.08104 ; wipe and retract
G1 X115.844 Y105.320 E-0.04149 ; wipe and retract
G1 X115.693 Y105.468 E-0.05569 ; wipe and retract
G1 X115.664 Y105.475 E-0.00790 ; wipe and retract
;WIPE_END
G1 E-1.67947 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X113.498 Y100.899 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.208 Y100.906 E0.01346 ; perimeter
G1 X113.138 Y100.887 E0.00338 ; perimeter
G1 X113.012 Y100.803 E0.00701 ; perimeter
G1 X112.922 Y100.651 E0.00818 ; perimeter
G1 X112.889 Y100.505 E0.00693 ; perimeter
G1 X112.925 Y100.356 E0.00709 ; perimeter
G1 X112.985 Y100.241 E0.00598 ; perimeter
G1 X113.120 Y100.103 E0.00895 ; perimeter
G1 X113.265 Y100.066 E0.00695 ; perimeter
G1 X113.476 Y100.076 E0.00976 ; perimeter
G1 X113.612 Y100.142 E0.00701 ; perimeter
G1 X113.704 Y100.237 E0.00610 ; perimeter
G1 X113.782 Y100.419 E0.00919 ; perimeter
G1 X113.779 Y100.591 E0.00800 ; perimeter
G1 X113.697 Y100.746 E0.00811 ; perimeter
G1 X113.546 Y100.863 E0.00885 ; perimeter
G1 X113.287 Y100.700 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.208 Y100.906 E-0.08993 ; wipe and retract
G1 X113.138 Y100.887 E-0.01923 ; wipe and retract
G1 X113.012 Y100.803 E-0.03995 ; wipe and retract
G1 X112.922 Y100.651 E-0.04662 ; wipe and retract
G1 X112.889 Y100.505 E-0.03951 ; wipe and retract
G1 X112.925 Y100.356 E-0.04038 ; wipe and retract
G1 X112.985 Y100.241 E-0.03406 ; wipe and retract
G1 X113.120 Y100.103 E-0.05098 ; wipe and retract
G1 X113.265 Y100.066 E-0.03959 ; wipe and retract
G1 X113.476 Y100.076 E-0.05561 ; wipe and retract
G1 X113.612 Y100.142 E-0.03992 ; wipe and retract
G1 X113.704 Y100.237 E-0.03478 ; wipe and retract
G1 X113.782 Y100.419 E-0.05235 ; wipe and retract
G1 X113.779 Y100.591 E-0.04556 ; wipe and retract
G1 X113.697 Y100.746 E-0.04621 ; wipe and retract
G1 X113.546 Y100.863 E-0.05042 ; wipe and retract
;WIPE_END
G1 E-1.67490 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X110.095 Y96.284 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.331 Y96.348 E0.01133 ; perimeter
G1 X110.530 Y96.504 E0.01171 ; perimeter
G1 X110.646 Y96.831 E0.01606 ; perimeter
G1 X110.743 Y96.939 E0.00673 ; perimeter
G1 X110.821 Y97.100 E0.00830 ; perimeter
G1 X110.378 Y97.106 E0.02051 ; perimeter
G1 X110.299 Y97.160 E0.00444 ; perimeter
G1 X109.986 Y97.166 E0.01449 ; perimeter
G1 X109.777 Y97.073 E0.01061 ; perimeter
G1 X109.747 Y97.043 E0.00198 ; perimeter
G1 X109.648 Y96.837 E0.01057 ; perimeter
G1 X109.645 Y96.673 E0.00761 ; perimeter
G1 X109.740 Y96.481 E0.00990 ; perimeter
G1 X109.971 Y96.325 E0.01291 ; perimeter
G1 X110.038 Y96.303 E0.00327 ; perimeter
G1 X110.216 Y96.497 F10800.000 ; move inwards before travel
G1 X111.020 Y97.301 ; move to first perimeter point
G1 F1800.000
G1 X111.199 Y97.126 E0.01164 ; perimeter
G1 X111.279 Y97.124 E0.00367 ; perimeter
G1 X111.711 Y97.189 E0.02026 ; perimeter
G1 X111.875 Y97.333 E0.01011 ; perimeter
G1 X111.984 Y97.497 E0.00912 ; perimeter
G1 X112.033 Y97.721 E0.01061 ; perimeter
G1 X112.000 Y98.021 E0.01401 ; perimeter
G1 X111.876 Y98.224 E0.01100 ; perimeter
G1 X111.767 Y98.309 E0.00639 ; perimeter
G1 X111.659 Y98.282 E0.00517 ; perimeter
G1 X111.424 Y98.120 E0.01322 ; perimeter
G1 X111.183 Y97.709 E0.02209 ; perimeter
G1 X111.162 Y97.592 E0.00549 ; perimeter
G1 X111.046 Y97.355 E0.01222 ; perimeter
G1 X111.269 Y97.271 F10800.000 ; move inwards before travel
G1 X111.450 Y97.393 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.234072
G1 F2400.000
G1 X111.729 Y98.001 E0.01063 ; infill
G1 X111.740 Y97.984 F10800.000 ; move to first infill point
;WIDTH:0.355721
G1 F2400.000
G1 X111.612 Y97.655 E0.00918 ; infill
G1 X111.555 Y97.571 E0.00264 ; infill
;WIDTH:0.341645
G1 X111.455 Y97.394 E0.00506 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.555 Y97.571 E-0.05374 ; wipe and retract
;WIPE_END
G1 E-2.34626 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X107.968 Y95.361 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.057 Y95.608 E0.01216 ; perimeter
G1 X108.010 Y95.821 E0.01011 ; perimeter
G1 X107.780 Y95.938 E0.01194 ; perimeter
G1 X107.400 Y95.965 E0.01763 ; perimeter
G1 X107.214 Y95.912 E0.00899 ; perimeter
G1 X106.958 Y95.773 E0.01347 ; perimeter
G1 X106.724 Y95.565 E0.01450 ; perimeter
G1 X106.470 Y95.440 E0.01313 ; perimeter
G1 X106.332 Y95.315 E0.00862 ; perimeter
G1 X106.027 Y95.159 E0.01587 ; perimeter
G1 X105.392 Y94.903 E0.03170 ; perimeter
G1 X105.057 Y94.907 E0.01555 ; perimeter
G1 X104.758 Y94.798 E0.01474 ; perimeter
G1 X104.620 Y94.653 E0.00924 ; perimeter
G1 X104.628 Y94.340 E0.01449 ; perimeter
G1 X104.693 Y94.194 E0.00740 ; perimeter
G1 X104.819 Y94.118 E0.00682 ; perimeter
G1 X105.080 Y94.078 E0.01223 ; perimeter
G1 X105.407 Y94.188 E0.01597 ; perimeter
G1 X105.677 Y94.377 E0.01529 ; perimeter
G1 X105.783 Y94.489 E0.00715 ; perimeter
G1 X105.846 Y94.623 E0.00683 ; perimeter
G1 X106.733 Y95.037 E0.04534 ; perimeter
G1 X107.138 Y95.100 E0.01902 ; perimeter
G1 X107.322 Y95.083 E0.00854 ; perimeter
G1 X107.558 Y95.124 E0.01109 ; perimeter
G1 X107.842 Y95.242 E0.01424 ; perimeter
G1 X107.925 Y95.320 E0.00527 ; perimeter
G1 X107.850 Y95.595 F10800.000 ; move inwards before travel
G1 X107.797 Y95.659 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.410156
G1 F2400.000
G1 X106.814 Y95.325 E0.03170 ; infill
G1 X106.813 Y95.328 F10800.000 ; move to first infill point
;WIDTH:0.275574
G1 F2400.000
G1 X107.141 Y95.458 E0.00684 ; infill
;WIDTH:0.300699
G1 X107.780 Y95.668 E0.01439 ; infill
G1 X107.787 Y95.664 F10800.000 ; move to first infill point
;WIDTH:0.281122
G1 F2400.000
G1 X107.646 Y95.572 E0.00334 ; infill
G1 X106.903 Y95.307 E0.01563 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.646 Y95.572 E-0.20819 ; wipe and retract
G1 X107.787 Y95.664 E-0.04451 ; wipe and retract
;WIPE_END
G1 E-2.14730 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X104.872 Y94.568 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.251378
G1 F2400.000
G1 X104.960 Y94.504 E0.00188 ; infill
;WIDTH:0.293607
G1 X104.983 Y94.490 E0.00055 ; infill
;WIDTH:0.335835
G1 X105.005 Y94.476 E0.00065 ; infill
;WIDTH:0.35215
G1 X105.532 Y94.574 E0.01379 ; infill
G1 X105.605 Y94.678 F10800.000 ; move to first infill point
;WIDTH:0.173856
G1 F2400.000
G1 X105.462 Y94.600 E0.00177 ; infill
G1 X104.885 Y94.360 E0.00681 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.462 Y94.600 E-0.16501 ; wipe and retract
G1 X105.605 Y94.678 E-0.04293 ; wipe and retract
;WIPE_END
G1 E-2.19207 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X102.181 Y94.758 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.143 Y94.953 E0.00922 ; perimeter
G1 X102.066 Y95.136 E0.00918 ; perimeter
G1 X101.771 Y95.297 E0.01559 ; perimeter
G1 X101.541 Y95.349 E0.01091 ; perimeter
G1 X101.416 Y95.344 E0.00579 ; perimeter
G1 X101.213 Y95.262 E0.01016 ; perimeter
G1 X101.171 Y95.062 E0.00947 ; perimeter
G1 X101.240 Y94.713 E0.01648 ; perimeter
G1 X101.373 Y94.579 E0.00876 ; perimeter
G1 X101.548 Y94.474 E0.00943 ; perimeter
G1 X101.592 Y94.454 E0.00224 ; perimeter
G1 X101.772 Y94.451 E0.00834 ; perimeter
G1 X102.012 Y94.517 E0.01154 ; perimeter
G1 X102.124 Y94.603 E0.00655 ; perimeter
G1 X102.167 Y94.700 E0.00490 ; perimeter
G1 X102.016 Y94.870 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.143 Y94.953 E-0.06727 ; wipe and retract
G1 X102.066 Y95.136 E-0.05229 ; wipe and retract
G1 X101.771 Y95.297 E-0.08879 ; wipe and retract
G1 X101.541 Y95.349 E-0.06214 ; wipe and retract
G1 X101.416 Y95.344 E-0.03299 ; wipe and retract
G1 X101.213 Y95.262 E-0.05786 ; wipe and retract
G1 X101.171 Y95.062 E-0.05394 ; wipe and retract
G1 X101.240 Y94.713 E-0.09389 ; wipe and retract
G1 X101.373 Y94.579 E-0.04991 ; wipe and retract
G1 X101.548 Y94.474 E-0.05373 ; wipe and retract
G1 X101.592 Y94.454 E-0.01275 ; wipe and retract
G1 X101.772 Y94.451 E-0.04752 ; wipe and retract
G1 X102.012 Y94.517 E-0.06576 ; wipe and retract
G1 X102.124 Y94.603 E-0.03732 ; wipe and retract
G1 X102.167 Y94.700 E-0.02789 ; wipe and retract
;WIPE_END
G1 E-1.59595 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X99.490 Y96.665 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.630 Y96.760 E0.00785 ; perimeter
G1 X99.772 Y96.975 E0.01192 ; perimeter
G1 X99.749 Y97.263 E0.01337 ; perimeter
G1 X99.690 Y97.404 E0.00708 ; perimeter
G1 X99.210 Y98.079 E0.03841 ; perimeter
G1 X99.130 Y98.650 E0.02669 ; perimeter
G1 X99.182 Y98.831 E0.00871 ; perimeter
G1 X99.166 Y99.006 E0.00812 ; perimeter
G1 X99.274 Y99.302 E0.01462 ; perimeter
G1 X99.274 Y99.511 E0.00966 ; perimeter
G1 X99.329 Y99.767 E0.01216 ; perimeter
G1 X99.222 Y100.018 E0.01265 ; perimeter
G1 X98.981 Y100.175 E0.01329 ; perimeter
G1 X98.948 Y100.178 E0.00154 ; perimeter
G1 X98.839 Y100.157 E0.00516 ; perimeter
G1 X98.706 Y100.098 E0.00672 ; perimeter
G1 X98.609 Y100.014 E0.00594 ; perimeter
G1 X98.554 Y99.885 E0.00649 ; perimeter
G1 X98.544 Y99.676 E0.00972 ; perimeter
G1 X98.562 Y99.406 E0.01253 ; perimeter
G1 X98.665 Y99.120 E0.01408 ; perimeter
G1 X98.802 Y98.856 E0.01377 ; perimeter
G1 X98.831 Y98.446 E0.01902 ; perimeter
G1 X98.902 Y98.311 E0.00707 ; perimeter
G1 X98.829 Y98.006 E0.01450 ; perimeter
G1 X98.818 Y97.734 E0.01262 ; perimeter
G1 X98.873 Y97.148 E0.02726 ; perimeter
G1 X98.967 Y96.932 E0.01091 ; perimeter
G1 X99.141 Y96.749 E0.01170 ; perimeter
G1 X99.310 Y96.675 E0.00854 ; perimeter
G1 X99.430 Y96.668 E0.00557 ; perimeter
G1 X99.525 Y96.831 F10800.000 ; move inwards before travel
G1 X99.466 Y96.953 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.393231
G1 F2400.000
G1 X99.070 Y97.632 E0.02287 ; infill
G1 X98.969 Y99.171 F10800.000 ; move to first infill point
;WIDTH:0.27637
G1 F2400.000
G1 X98.916 Y99.479 E0.00608 ; infill
G1 X98.929 Y99.729 E0.00485 ; infill
G1 X98.892 Y99.807 E0.00168 ; infill
;WIDTH:0.243684
G1 X98.820 Y99.878 E0.00168 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.892 Y99.807 E-0.02663 ; wipe and retract
;WIPE_END
G1 E-2.37337 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X100.120 Y102.649 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.188 Y102.699 E0.00392 ; perimeter
G1 X100.270 Y102.821 E0.00680 ; perimeter
G1 X100.401 Y103.101 E0.01430 ; perimeter
G1 X100.425 Y103.271 E0.00797 ; perimeter
G1 X100.810 Y103.917 E0.03484 ; perimeter
G1 X101.403 Y104.377 E0.03474 ; perimeter
G1 X101.631 Y104.734 E0.01965 ; perimeter
G1 X101.708 Y104.997 E0.01268 ; perimeter
G1 X101.746 Y105.417 E0.01951 ; perimeter
G1 X101.987 Y105.977 E0.02825 ; perimeter
G1 X102.336 Y106.593 E0.03281 ; perimeter
G1 X102.484 Y106.757 E0.01025 ; perimeter
G1 X102.795 Y107.005 E0.01840 ; perimeter
G1 X102.873 Y107.113 E0.00617 ; perimeter
G1 X103.818 Y107.645 E0.05024 ; perimeter
G1 X104.111 Y107.860 E0.01681 ; perimeter
G1 X104.358 Y108.098 E0.01589 ; perimeter
G1 X104.465 Y108.258 E0.00891 ; perimeter
G1 X104.545 Y108.475 E0.01074 ; perimeter
G1 X104.523 Y108.579 E0.00492 ; perimeter
G1 X104.344 Y108.632 E0.00864 ; perimeter
G1 X104.104 Y108.622 E0.01114 ; perimeter
G1 X103.827 Y108.549 E0.01328 ; perimeter
G1 X103.338 Y108.305 E0.02528 ; perimeter
G1 X102.739 Y107.829 E0.03546 ; perimeter
G1 X102.524 Y107.619 E0.01392 ; perimeter
G1 X102.308 Y107.474 E0.01207 ; perimeter
G1 X101.493 Y106.829 E0.04814 ; perimeter
G1 X101.332 Y106.564 E0.01436 ; perimeter
G1 X101.290 Y106.450 E0.00562 ; perimeter
G1 X101.158 Y105.853 E0.02833 ; perimeter
G1 X100.945 Y105.230 E0.03052 ; perimeter
G1 X100.714 Y104.728 E0.02558 ; perimeter
G1 X100.708 Y104.603 E0.00581 ; perimeter
G1 X100.543 Y104.225 E0.01910 ; perimeter
G1 X100.298 Y103.813 E0.02221 ; perimeter
G1 X100.040 Y103.707 E0.01292 ; perimeter
G1 X99.903 Y103.560 E0.00931 ; perimeter
G1 X99.678 Y103.376 E0.01346 ; perimeter
G1 X99.564 Y103.175 E0.01071 ; perimeter
G1 X99.523 Y103.054 E0.00592 ; perimeter
G1 X99.517 Y102.917 E0.00635 ; perimeter
G1 X99.565 Y102.733 E0.00881 ; perimeter
G1 X99.649 Y102.646 E0.00558 ; perimeter
G1 X99.927 Y102.596 E0.01309 ; perimeter
G1 X100.062 Y102.634 E0.00648 ; perimeter
G1 X100.128 Y102.734 F10800.000 ; move inwards before travel
G1 X99.868 Y102.852 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.157342
G1 F2400.000
G1 X100.132 Y103.362 E0.00546 ; infill
G1 X100.260 Y103.536 E0.00206 ; infill
G1 X100.177 Y103.501 F10800.000 ; move to first infill point
;WIDTH:0.348592
G1 F2400.000
G1 X99.909 Y102.991 E0.01463 ; infill
;WIDTH:0.332151
G1 X99.897 Y102.984 E0.00034 ; infill
;WIDTH:0.313931
G1 X99.835 Y102.935 E0.00177 ; infill
;WIDTH:0.275516
G1 X99.774 Y102.886 E0.00152 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.835 Y102.935 E-0.02078 ; wipe and retract
;WIPE_END
G1 E-2.37922 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 X101.487 Y105.225 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.252961
G1 F2400.000
G1 X100.885 Y104.280 E0.01957 ; infill
G1 X100.845 Y104.314 F10800.000 ; move to first infill point
;WIDTH:0.346973
G1 F2400.000
G1 X101.109 Y104.646 E0.01071 ; infill
;WIDTH:0.356183
G1 X101.250 Y104.904 E0.00765 ; infill
G1 X101.313 Y105.072 E0.00470 ; infill
G1 X101.359 Y105.288 E0.00574 ; infill
;WIDTH:0.259603
G1 X101.411 Y105.519 E0.00427 ; infill
;WIDTH:0.278011
G1 X101.505 Y105.763 E0.00510 ; infill
;WIDTH:0.315814
G1 X101.567 Y105.954 E0.00456 ; infill
;WIDTH:0.357726
G1 X101.634 Y106.161 E0.00571 ; infill
;WIDTH:0.38451
G1 X101.667 Y106.246 E0.00258 ; infill
;WIDTH:0.413574
G1 X101.721 Y106.377 E0.00437 ; infill
G1 X101.889 Y106.626 E0.00927 ; infill
;WIDTH:0.278426
G1 X102.052 Y106.814 E0.00486 ; infill
G1 X102.248 Y106.997 E0.00525 ; infill
;WIDTH:0.178031
G1 X102.724 Y107.383 E0.00689 ; infill
;WIDTH:0.218127
G1 X102.847 Y107.475 E0.00224 ; infill
;WIDTH:0.258225
G1 X102.970 Y107.567 E0.00275 ; infill
;WIDTH:0.295495
G1 X103.166 Y107.699 E0.00495 ; infill
;WIDTH:0.316132
G1 X103.857 Y108.142 E0.01867 ; infill
G1 X104.178 Y108.384 E0.00911 ; infill
;LAYER_CHANGE
;Z:17.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;17.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.857 Y108.142 E-0.10585 ; wipe and retract
G1 X103.166 Y107.699 E-0.21683 ; wipe and retract
;WIPE_END
G1 E-2.07732 F2400.000 ; retract
G1 Z17.075 F10800.000 ; lift Z
G1 Z17.200 ; move to next layer (85)
;AFTER_LAYER_CHANGE
;17.2
G1 Z17.275 ; lift Z
G1 X107.102 Y110.107 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.142 Y110.015 E0.00464 ; perimeter
G1 X107.443 Y109.864 E0.01558 ; perimeter
G1 X107.545 Y109.877 E0.00479 ; perimeter
G1 X107.671 Y109.862 E0.00587 ; perimeter
G1 X107.904 Y109.899 E0.01093 ; perimeter
G1 X107.966 Y109.940 E0.00341 ; perimeter
G1 X108.101 Y110.138 E0.01110 ; perimeter
G1 X108.126 Y110.289 E0.00711 ; perimeter
G1 X108.111 Y110.369 E0.00378 ; perimeter
G1 X107.996 Y110.517 E0.00870 ; perimeter
G1 X107.799 Y110.580 E0.00958 ; perimeter
G1 X107.715 Y110.629 E0.00446 ; perimeter
G1 X107.388 Y110.539 E0.01571 ; perimeter
G1 X107.188 Y110.332 E0.01336 ; perimeter
G1 X107.131 Y110.159 E0.00842 ; perimeter
G1 X107.193 Y110.064 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.142 Y110.015 E-0.03813 ; wipe and retract
G1 X107.443 Y109.864 E-0.08875 ; wipe and retract
G1 X107.545 Y109.877 E-0.02728 ; wipe and retract
G1 X107.671 Y109.862 E-0.03344 ; wipe and retract
G1 X107.904 Y109.899 E-0.06225 ; wipe and retract
G1 X107.966 Y109.940 E-0.01945 ; wipe and retract
G1 X108.101 Y110.138 E-0.06325 ; wipe and retract
G1 X108.126 Y110.289 E-0.04053 ; wipe and retract
G1 X108.111 Y110.369 E-0.02152 ; wipe and retract
G1 X107.996 Y110.517 E-0.04954 ; wipe and retract
G1 X107.799 Y110.580 E-0.05458 ; wipe and retract
G1 X107.715 Y110.629 E-0.02542 ; wipe and retract
G1 X107.388 Y110.539 E-0.08949 ; wipe and retract
G1 X107.188 Y110.332 E-0.07611 ; wipe and retract
G1 X107.131 Y110.159 E-0.04798 ; wipe and retract
;WIPE_END
G1 E-1.66227 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X109.557 Y112.690 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.633 Y112.486 E0.01007 ; perimeter
G1 X109.813 Y112.378 E0.00972 ; perimeter
G1 X110.046 Y112.377 E0.01077 ; perimeter
G1 X110.254 Y112.456 E0.01033 ; perimeter
G1 X110.385 Y112.552 E0.00752 ; perimeter
G1 X110.494 Y112.713 E0.00903 ; perimeter
G1 X110.522 Y112.789 E0.00372 ; perimeter
G1 X110.531 Y112.956 E0.00776 ; perimeter
G1 X110.387 Y113.199 E0.01308 ; perimeter
G1 X110.341 Y113.224 E0.00241 ; perimeter
G1 X110.154 Y113.248 E0.00874 ; perimeter
G1 X109.856 Y113.154 E0.01451 ; perimeter
G1 X109.644 Y112.944 E0.01380 ; perimeter
G1 X109.573 Y112.747 E0.00971 ; perimeter
G1 X109.750 Y112.590 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.633 Y112.486 E-0.07056 ; wipe and retract
G1 X109.813 Y112.378 E-0.05536 ; wipe and retract
G1 X110.046 Y112.377 E-0.06138 ; wipe and retract
G1 X110.254 Y112.456 E-0.05885 ; wipe and retract
G1 X110.385 Y112.552 E-0.04282 ; wipe and retract
G1 X110.494 Y112.713 E-0.05144 ; wipe and retract
G1 X110.522 Y112.789 E-0.02120 ; wipe and retract
G1 X110.531 Y112.956 E-0.04418 ; wipe and retract
G1 X110.387 Y113.199 E-0.07450 ; wipe and retract
G1 X110.341 Y113.224 E-0.01376 ; wipe and retract
G1 X110.154 Y113.248 E-0.04978 ; wipe and retract
G1 X109.856 Y113.154 E-0.08265 ; wipe and retract
G1 X109.644 Y112.944 E-0.07861 ; wipe and retract
G1 X109.573 Y112.747 E-0.05533 ; wipe and retract
;WIPE_END
G1 E-1.63958 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X112.319 Y115.569 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.426 Y115.454 E0.00730 ; perimeter
G1 X112.569 Y115.390 E0.00725 ; perimeter
G1 X112.734 Y115.362 E0.00777 ; perimeter
G1 X112.961 Y115.402 E0.01065 ; perimeter
G1 X113.110 Y115.477 E0.00774 ; perimeter
G1 X113.161 Y115.524 E0.00319 ; perimeter
G1 X113.218 Y115.657 E0.00670 ; perimeter
G1 X113.226 Y115.766 E0.00505 ; perimeter
G1 X113.199 Y115.895 E0.00611 ; perimeter
G1 X113.097 Y116.045 E0.00839 ; perimeter
G1 X112.987 Y116.117 E0.00610 ; perimeter
G1 X112.770 Y116.155 E0.01023 ; perimeter
G1 X112.468 Y116.099 E0.01421 ; perimeter
G1 X112.352 Y116.003 E0.00696 ; perimeter
G1 X112.276 Y115.807 E0.00976 ; perimeter
G1 X112.297 Y115.625 E0.00845 ; perimeter
G1 X112.476 Y115.561 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.426 Y115.454 E-0.05656 ; wipe and retract
G1 X112.569 Y115.390 E-0.04129 ; wipe and retract
G1 X112.734 Y115.362 E-0.04428 ; wipe and retract
G1 X112.961 Y115.402 E-0.06068 ; wipe and retract
G1 X113.110 Y115.477 E-0.04411 ; wipe and retract
G1 X113.161 Y115.524 E-0.01820 ; wipe and retract
G1 X113.218 Y115.657 E-0.03819 ; wipe and retract
G1 X113.226 Y115.766 E-0.02879 ; wipe and retract
G1 X113.199 Y115.895 E-0.03480 ; wipe and retract
G1 X113.097 Y116.045 E-0.04781 ; wipe and retract
G1 X112.987 Y116.117 E-0.03475 ; wipe and retract
G1 X112.770 Y116.155 E-0.05827 ; wipe and retract
G1 X112.468 Y116.099 E-0.08096 ; wipe and retract
G1 X112.352 Y116.003 E-0.03964 ; wipe and retract
G1 X112.276 Y115.807 E-0.05559 ; wipe and retract
G1 X112.297 Y115.625 E-0.04814 ; wipe and retract
;WIPE_END
G1 E-1.66797 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X114.440 Y115.668 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.441 Y115.417 E0.01164 ; perimeter
G1 X114.499 Y115.315 E0.00543 ; perimeter
G1 X115.233 Y114.504 E0.05065 ; perimeter
G1 X115.476 Y114.455 E0.01148 ; perimeter
G1 X115.664 Y114.503 E0.00898 ; perimeter
G1 X115.801 Y114.645 E0.00915 ; perimeter
G1 X115.843 Y114.743 E0.00497 ; perimeter
G1 X115.842 Y114.930 E0.00866 ; perimeter
G1 X115.802 Y115.059 E0.00625 ; perimeter
G1 X115.754 Y115.145 E0.00452 ; perimeter
G1 X115.421 Y115.487 E0.02214 ; perimeter
G1 X115.154 Y115.828 E0.02006 ; perimeter
G1 X115.067 Y115.897 E0.00515 ; perimeter
G1 X114.922 Y115.958 E0.00731 ; perimeter
G1 X114.790 Y115.968 E0.00612 ; perimeter
G1 X114.655 Y115.935 E0.00643 ; perimeter
G1 X114.522 Y115.839 E0.00762 ; perimeter
G1 X114.466 Y115.722 E0.00599 ; perimeter
G1 X114.624 Y115.497 F10800.000 ; move inwards before travel
G1 X115.575 Y114.757 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314104
G1 F2400.000
G1 X115.466 Y114.841 E0.00310 ; infill
G1 X115.126 Y115.217 E0.01144 ; infill
G1 X114.732 Y115.694 E0.01393 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.126 Y115.217 E-0.16303 ; wipe and retract
G1 X115.466 Y114.841 E-0.13387 ; wipe and retract
G1 X115.575 Y114.757 E-0.03626 ; wipe and retract
;WIPE_END
G1 E-2.06684 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X115.194 Y112.288 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.145 Y111.968 E0.01502 ; perimeter
G1 X115.233 Y111.752 E0.01080 ; perimeter
G1 X115.328 Y111.673 E0.00569 ; perimeter
G1 X115.415 Y111.640 E0.00435 ; perimeter
G1 X115.537 Y111.629 E0.00567 ; perimeter
G1 X115.661 Y111.654 E0.00586 ; perimeter
G1 X115.790 Y111.744 E0.00727 ; perimeter
G1 X115.833 Y111.794 E0.00306 ; perimeter
G1 X115.897 Y112.015 E0.01064 ; perimeter
G1 X115.893 Y112.162 E0.00681 ; perimeter
G1 X115.813 Y112.343 E0.00915 ; perimeter
G1 X115.724 Y112.422 E0.00552 ; perimeter
G1 X115.554 Y112.475 E0.00826 ; perimeter
G1 X115.449 Y112.469 E0.00487 ; perimeter
G1 X115.264 Y112.386 E0.00940 ; perimeter
G1 X115.229 Y112.337 E0.00278 ; perimeter
G1 X115.385 Y112.026 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.145 Y111.968 E-0.09998 ; wipe and retract
G1 X115.233 Y111.752 E-0.06151 ; wipe and retract
G1 X115.328 Y111.673 E-0.03240 ; wipe and retract
G1 X115.415 Y111.640 E-0.02478 ; wipe and retract
G1 X115.537 Y111.629 E-0.03229 ; wipe and retract
G1 X115.661 Y111.654 E-0.03338 ; wipe and retract
G1 X115.790 Y111.744 E-0.04142 ; wipe and retract
G1 X115.833 Y111.794 E-0.01743 ; wipe and retract
G1 X115.897 Y112.015 E-0.06062 ; wipe and retract
G1 X115.893 Y112.162 E-0.03878 ; wipe and retract
G1 X115.813 Y112.343 E-0.05210 ; wipe and retract
G1 X115.724 Y112.422 E-0.03147 ; wipe and retract
G1 X115.554 Y112.475 E-0.04708 ; wipe and retract
G1 X115.449 Y112.469 E-0.02775 ; wipe and retract
G1 X115.264 Y112.386 E-0.05355 ; wipe and retract
G1 X115.229 Y112.337 E-0.01584 ; wipe and retract
;WIPE_END
G1 E-1.72962 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X115.554 Y105.496 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.336 Y105.461 E0.01026 ; perimeter
G1 X115.202 Y105.336 E0.00847 ; perimeter
G1 X115.117 Y105.180 E0.00823 ; perimeter
G1 X115.082 Y105.023 E0.00742 ; perimeter
G1 X115.071 Y104.884 E0.00647 ; perimeter
G1 X115.090 Y104.806 E0.00371 ; perimeter
G1 X115.155 Y104.709 E0.00545 ; perimeter
G1 X115.234 Y104.498 E0.01043 ; perimeter
G1 X115.363 Y104.416 E0.00709 ; perimeter
G1 X115.522 Y104.434 E0.00740 ; perimeter
G1 X115.594 Y104.514 E0.00498 ; perimeter
G1 X115.662 Y104.537 E0.00331 ; perimeter
G1 X115.768 Y104.649 E0.00713 ; perimeter
G1 X115.870 Y104.850 E0.01045 ; perimeter
G1 X115.893 Y105.171 E0.01491 ; perimeter
G1 X115.851 Y105.300 E0.00628 ; perimeter
G1 X115.676 Y105.464 E0.01110 ; perimeter
G1 X115.612 Y105.481 E0.00305 ; perimeter
G1 X115.427 Y105.315 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.336 Y105.461 E-0.07319 ; wipe and retract
G1 X115.202 Y105.336 E-0.04827 ; wipe and retract
G1 X115.117 Y105.180 E-0.04690 ; wipe and retract
G1 X115.082 Y105.023 E-0.04229 ; wipe and retract
G1 X115.071 Y104.884 E-0.03683 ; wipe and retract
G1 X115.090 Y104.806 E-0.02111 ; wipe and retract
G1 X115.155 Y104.709 E-0.03103 ; wipe and retract
G1 X115.234 Y104.498 E-0.05939 ; wipe and retract
G1 X115.363 Y104.416 E-0.04041 ; wipe and retract
G1 X115.522 Y104.434 E-0.04218 ; wipe and retract
G1 X115.594 Y104.514 E-0.02839 ; wipe and retract
G1 X115.662 Y104.537 E-0.01888 ; wipe and retract
G1 X115.768 Y104.649 E-0.04063 ; wipe and retract
G1 X115.870 Y104.850 E-0.05952 ; wipe and retract
G1 X115.893 Y105.171 E-0.08493 ; wipe and retract
G1 X115.851 Y105.300 E-0.03580 ; wipe and retract
G1 X115.676 Y105.464 E-0.06324 ; wipe and retract
G1 X115.612 Y105.481 E-0.01739 ; wipe and retract
;WIPE_END
G1 E-1.60961 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X113.608 Y100.851 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.202 Y100.852 E0.01879 ; perimeter
G1 X113.066 Y100.767 E0.00744 ; perimeter
G1 X112.974 Y100.613 E0.00834 ; perimeter
G1 X112.946 Y100.453 E0.00754 ; perimeter
G1 X112.988 Y100.246 E0.00976 ; perimeter
G1 X113.172 Y100.050 E0.01248 ; perimeter
G1 X113.339 Y99.998 E0.00810 ; perimeter
G1 X113.549 Y100.039 E0.00991 ; perimeter
G1 X113.657 Y100.095 E0.00564 ; perimeter
G1 X113.760 Y100.220 E0.00750 ; perimeter
G1 X113.838 Y100.375 E0.00805 ; perimeter
G1 X113.840 Y100.597 E0.01026 ; perimeter
G1 X113.794 Y100.728 E0.00647 ; perimeter
G1 X113.659 Y100.819 E0.00754 ; perimeter
G1 X113.320 Y100.573 F10800.000 ; move inwards before travel
G1 X113.378 Y100.437 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.391244
G1 F2400.000
G1 X113.409 Y100.440 E0.00090 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.378 Y100.437 E-0.00818 ; wipe and retract
;WIPE_END
G1 E-2.39182 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X110.950 Y97.232 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.651 Y97.210 E0.01388 ; perimeter
G1 X110.431 Y97.120 E0.01100 ; perimeter
G1 X110.086 Y97.128 E0.01600 ; perimeter
G1 X109.879 Y97.041 E0.01039 ; perimeter
G1 X109.752 Y96.911 E0.00842 ; perimeter
G1 X109.691 Y96.779 E0.00676 ; perimeter
G1 X109.682 Y96.638 E0.00651 ; perimeter
G1 X109.779 Y96.428 E0.01071 ; perimeter
G1 X109.936 Y96.279 E0.01007 ; perimeter
G1 X110.120 Y96.218 E0.00897 ; perimeter
G1 X110.313 Y96.249 E0.00906 ; perimeter
G1 X110.439 Y96.309 E0.00647 ; perimeter
G1 X110.603 Y96.430 E0.00941 ; perimeter
G1 X110.762 Y96.673 E0.01346 ; perimeter
G1 X111.026 Y96.937 E0.01728 ; perimeter
G1 X111.504 Y97.034 E0.02261 ; perimeter
G1 X111.660 Y97.084 E0.00759 ; perimeter
G1 X111.813 Y97.207 E0.00911 ; perimeter
G1 X111.925 Y97.364 E0.00891 ; perimeter
G1 X111.977 Y97.587 E0.01061 ; perimeter
G1 X111.945 Y97.884 E0.01384 ; perimeter
G1 X111.833 Y98.052 E0.00937 ; perimeter
G1 X111.749 Y98.085 E0.00418 ; perimeter
G1 X111.563 Y98.085 E0.00860 ; perimeter
G1 X111.372 Y97.972 E0.01030 ; perimeter
G1 X111.107 Y97.552 E0.02299 ; perimeter
G1 X110.977 Y97.286 E0.01373 ; perimeter
G1 X110.913 Y96.934 F10800.000 ; move inwards before travel
G1 X111.243 Y97.227 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.270207
G1 F2400.000
G1 X111.728 Y97.648 E0.01214 ; infill
G1 X111.687 Y97.837 F10800.000 ; move to first infill point
;WIDTH:0.35054
G1 F2400.000
G1 X111.557 Y97.525 E0.00864 ; infill
G1 X111.312 Y97.241 E0.00958 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.557 Y97.525 E-0.09883 ; wipe and retract
G1 X111.687 Y97.837 E-0.08917 ; wipe and retract
;WIPE_END
G1 E-2.21200 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X108.172 Y95.845 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.865 Y95.976 E0.01542 ; perimeter
G1 X107.715 Y95.991 E0.00701 ; perimeter
G1 X107.532 Y95.979 E0.00846 ; perimeter
G1 X107.318 Y95.908 E0.01048 ; perimeter
G1 X107.192 Y95.840 E0.00661 ; perimeter
G1 X107.059 Y95.737 E0.00782 ; perimeter
G1 X106.886 Y95.571 E0.01107 ; perimeter
G1 X106.692 Y95.354 E0.01350 ; perimeter
G1 X106.708 Y95.295 E0.00285 ; perimeter
G1 X107.026 Y95.177 E0.01568 ; perimeter
G1 X107.485 Y95.122 E0.02144 ; perimeter
G1 X107.816 Y95.180 E0.01557 ; perimeter
G1 X108.007 Y95.267 E0.00970 ; perimeter
G1 X108.138 Y95.368 E0.00767 ; perimeter
G1 X108.191 Y95.450 E0.00451 ; perimeter
G1 X108.246 Y95.627 E0.00857 ; perimeter
G1 X108.208 Y95.798 E0.00811 ; perimeter
G1 X107.851 Y95.756 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.865 Y95.976 E-0.10195 ; wipe and retract
G1 X107.715 Y95.991 E-0.03994 ; wipe and retract
G1 X107.532 Y95.979 E-0.04821 ; wipe and retract
G1 X107.318 Y95.908 E-0.05970 ; wipe and retract
G1 X107.192 Y95.840 E-0.03768 ; wipe and retract
G1 X107.059 Y95.737 E-0.04454 ; wipe and retract
G1 X106.886 Y95.571 E-0.06308 ; wipe and retract
G1 X106.692 Y95.354 E-0.07691 ; wipe and retract
G1 X106.708 Y95.295 E-0.01622 ; wipe and retract
G1 X107.026 Y95.177 E-0.08931 ; wipe and retract
G1 X107.485 Y95.122 E-0.12213 ; wipe and retract
G1 X107.816 Y95.180 E-0.08868 ; wipe and retract
G1 X108.007 Y95.267 E-0.05529 ; wipe and retract
G1 X108.138 Y95.368 E-0.04371 ; wipe and retract
G1 X108.191 Y95.450 E-0.02572 ; wipe and retract
G1 X108.246 Y95.627 E-0.04882 ; wipe and retract
G1 X108.208 Y95.798 E-0.04621 ; wipe and retract
;WIPE_END
G1 E-1.39192 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X105.765 Y94.735 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.563 Y94.877 E0.01146 ; perimeter
G1 X105.059 Y94.892 E0.02336 ; perimeter
G1 X104.989 Y94.878 E0.00330 ; perimeter
G1 X104.778 Y94.787 E0.01064 ; perimeter
G1 X104.650 Y94.649 E0.00870 ; perimeter
G1 X104.634 Y94.601 E0.00237 ; perimeter
G1 X104.640 Y94.331 E0.01249 ; perimeter
G1 X104.719 Y94.177 E0.00801 ; perimeter
G1 X104.848 Y94.101 E0.00694 ; perimeter
G1 X105.113 Y94.077 E0.01232 ; perimeter
G1 X105.330 Y94.147 E0.01055 ; perimeter
G1 X105.389 Y94.192 E0.00343 ; perimeter
G1 X105.659 Y94.509 E0.01931 ; perimeter
G1 X105.740 Y94.681 E0.00878 ; perimeter
G1 X105.519 Y94.756 F10800.000 ; move inwards before travel
G1 X105.023 Y94.473 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.332623
G1 F2400.000
G1 X105.006 Y94.457 E0.00056 ; infill
;WIDTH:0.297714
G1 X104.989 Y94.441 E0.00050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.006 Y94.457 E-0.00617 ; wipe and retract
;WIPE_END
G1 E-2.39383 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X107.122 Y95.408 ; move to first infill point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.373807
G1 F2400.000
G1 X107.479 Y95.533 E0.01043 ; infill
;WIDTH:0.384201
G1 X108.002 Y95.653 E0.01522 ; infill
G1 X107.983 Y95.592 F10800.000 ; move to first infill point
;WIDTH:0.348158
G1 F2400.000
G1 X107.257 Y95.585 E0.01843 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.983 Y95.592 E-0.19163 ; wipe and retract
;WIPE_END
G1 E-2.20837 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X102.224 Y94.973 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.122 Y95.139 E0.00898 ; perimeter
G1 X101.704 Y95.380 E0.02235 ; perimeter
G1 X101.499 Y95.435 E0.00985 ; perimeter
G1 X101.296 Y95.436 E0.00939 ; perimeter
G1 X101.231 Y95.463 E0.00327 ; perimeter
G1 X101.071 Y95.434 E0.00755 ; perimeter
G1 X101.028 Y95.372 E0.00352 ; perimeter
G1 X101.044 Y95.326 E0.00228 ; perimeter
G1 X101.028 Y95.154 E0.00796 ; perimeter
G1 X101.193 Y94.794 E0.01836 ; perimeter
G1 X101.303 Y94.660 E0.00802 ; perimeter
G1 X101.655 Y94.464 E0.01868 ; perimeter
G1 X101.821 Y94.459 E0.00768 ; perimeter
G1 X101.999 Y94.511 E0.00860 ; perimeter
G1 X102.140 Y94.605 E0.00781 ; perimeter
G1 X102.221 Y94.763 E0.00827 ; perimeter
G1 X102.233 Y94.914 E0.00701 ; perimeter
G1 X102.035 Y95.018 F10800.000 ; move inwards before travel
G1 X101.975 Y94.811 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.386491
G1 F2400.000
G1 X101.754 Y94.874 E0.00656 ; infill
G1 X101.547 Y95.002 E0.00695 ; infill
;WIDTH:0.37201
G1 X101.285 Y95.173 E0.00857 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.547 Y95.002 E-0.08261 ; wipe and retract
;WIPE_END
G1 E-2.31739 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X99.274 Y97.663 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.210 Y97.806 E0.00725 ; perimeter
G1 X99.124 Y97.886 E0.00547 ; perimeter
G1 X99.009 Y97.631 E0.01293 ; perimeter
G1 X98.979 Y97.607 E0.00182 ; perimeter
G1 X98.928 Y97.371 E0.01118 ; perimeter
G1 X98.942 Y97.130 E0.01115 ; perimeter
G1 X99.028 Y96.926 E0.01029 ; perimeter
G1 X99.237 Y96.677 E0.01503 ; perimeter
G1 X99.458 Y96.591 E0.01099 ; perimeter
G1 X99.691 Y96.579 E0.01079 ; perimeter
G1 X99.791 Y96.631 E0.00524 ; perimeter
G1 X99.802 Y96.725 E0.00435 ; perimeter
G1 X99.856 Y96.888 E0.00798 ; perimeter
G1 X99.826 Y97.128 E0.01120 ; perimeter
G1 X99.781 Y97.253 E0.00616 ; perimeter
G1 X99.566 Y97.532 E0.01629 ; perimeter
G1 X99.329 Y97.638 E0.01204 ; perimeter
G1 X99.118 Y97.654 F10800.000 ; move inwards before travel
G1 X99.253 Y97.408 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325406
G1 F2400.000
G1 X99.320 Y97.218 E0.00473 ; infill
;WIDTH:0.34137
G1 X99.444 Y97.036 E0.00547 ; infill
G1 X99.535 Y96.829 E0.00562 ; infill
G1 X99.563 Y96.827 F10800.000 ; move to first infill point
;WIDTH:0.221734
G1 F2400.000
G1 X99.299 Y97.388 E0.00922 ; infill
G1 X98.993 Y98.964 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.075 Y99.152 E0.00950 ; perimeter
G1 X99.176 Y99.193 E0.00504 ; perimeter
G1 X99.285 Y99.452 E0.01303 ; perimeter
G1 X99.348 Y99.734 E0.01341 ; perimeter
G1 X99.340 Y99.804 E0.00325 ; perimeter
G1 X99.241 Y100.009 E0.01056 ; perimeter
G1 X99.018 Y100.144 E0.01207 ; perimeter
G1 X98.916 Y100.154 E0.00473 ; perimeter
G1 X98.688 Y100.053 E0.01158 ; perimeter
G1 X98.622 Y99.999 E0.00393 ; perimeter
G1 X98.575 Y99.895 E0.00531 ; perimeter
G1 X98.561 Y99.619 E0.01278 ; perimeter
G1 X98.654 Y99.327 E0.01422 ; perimeter
G1 X98.728 Y99.272 E0.00425 ; perimeter
G1 X98.843 Y99.087 E0.01007 ; perimeter
G1 X98.965 Y99.017 E0.00653 ; perimeter
G1 X99.000 Y99.169 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.075 Y99.152 E-0.04593 ; wipe and retract
G1 X99.176 Y99.193 E-0.02869 ; wipe and retract
G1 X99.285 Y99.452 E-0.07423 ; wipe and retract
G1 X99.348 Y99.734 E-0.07639 ; wipe and retract
G1 X99.340 Y99.804 E-0.01854 ; wipe and retract
G1 X99.241 Y100.009 E-0.06015 ; wipe and retract
G1 X99.018 Y100.144 E-0.06874 ; wipe and retract
G1 X98.916 Y100.154 E-0.02695 ; wipe and retract
G1 X98.688 Y100.053 E-0.06595 ; wipe and retract
G1 X98.622 Y99.999 E-0.02237 ; wipe and retract
G1 X98.575 Y99.895 E-0.03025 ; wipe and retract
G1 X98.561 Y99.619 E-0.07279 ; wipe and retract
G1 X98.654 Y99.327 E-0.08102 ; wipe and retract
G1 X98.728 Y99.272 E-0.02419 ; wipe and retract
G1 X98.843 Y99.087 E-0.05734 ; wipe and retract
G1 X98.965 Y99.017 E-0.03720 ; wipe and retract
;WIPE_END
G1 E-1.60925 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X100.086 Y102.716 ; move to first perimeter point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.217 Y102.752 E0.00628 ; perimeter
G1 X100.343 Y102.915 E0.00954 ; perimeter
G1 X100.482 Y103.211 E0.01515 ; perimeter
G1 X100.696 Y103.566 E0.01917 ; perimeter
G1 X101.304 Y104.195 E0.04055 ; perimeter
G1 X101.609 Y104.649 E0.02532 ; perimeter
G1 X101.714 Y105.009 E0.01735 ; perimeter
G1 X101.751 Y105.312 E0.01415 ; perimeter
G1 X101.849 Y105.653 E0.01642 ; perimeter
G1 X102.048 Y106.112 E0.02320 ; perimeter
G1 X102.299 Y106.577 E0.02446 ; perimeter
G1 X102.303 Y106.639 E0.00291 ; perimeter
G1 X102.619 Y107.114 E0.02640 ; perimeter
G1 X102.923 Y107.320 E0.01701 ; perimeter
G1 X102.982 Y107.421 E0.00542 ; perimeter
G1 X103.224 Y107.508 E0.01191 ; perimeter
G1 X103.304 Y107.510 E0.00373 ; perimeter
G1 X103.651 Y107.629 E0.01697 ; perimeter
G1 X103.831 Y107.723 E0.00945 ; perimeter
G1 X104.000 Y107.770 E0.00809 ; perimeter
G1 X104.310 Y107.967 E0.01701 ; perimeter
G1 X104.629 Y108.245 E0.01962 ; perimeter
G1 X104.763 Y108.398 E0.00942 ; perimeter
G1 X104.836 Y108.575 E0.00887 ; perimeter
G1 X104.997 Y108.825 E0.01376 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.983 Y108.836 E0.00074 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.603 Y108.822 E0.01763 ; perimeter
G1 X104.296 Y108.775 E0.01440 ; perimeter
G1 X104.153 Y108.738 E0.00685 ; perimeter
G1 X103.731 Y108.538 E0.02160 ; perimeter
G1 X103.422 Y108.330 E0.01728 ; perimeter
G1 X103.247 Y108.177 E0.01077 ; perimeter
G1 X103.029 Y107.925 E0.01543 ; perimeter
G1 X102.936 Y107.768 E0.00844 ; perimeter
G1 X102.591 Y107.487 E0.02062 ; perimeter
G1 X101.957 Y107.051 E0.03564 ; perimeter
G1 X101.841 Y107.011 E0.00568 ; perimeter
G1 X101.373 Y106.624 E0.02813 ; perimeter
G1 X101.254 Y106.322 E0.01504 ; perimeter
G1 X101.152 Y105.808 E0.02428 ; perimeter
G1 X100.961 Y105.266 E0.02664 ; perimeter
G1 X100.624 Y104.533 E0.03738 ; perimeter
G1 X100.210 Y103.970 E0.03235 ; perimeter
G1 X99.879 Y103.612 E0.02259 ; perimeter
G1 X99.758 Y103.511 E0.00727 ; perimeter
G1 X99.624 Y103.301 E0.01157 ; perimeter
G1 X99.551 Y103.083 E0.01064 ; perimeter
G1 X99.566 Y102.922 E0.00748 ; perimeter
G1 X99.611 Y102.785 E0.00671 ; perimeter
G1 X99.692 Y102.700 E0.00545 ; perimeter
G1 X99.974 Y102.648 E0.01327 ; perimeter
G1 X100.035 Y102.685 E0.00330 ; perimeter
G1 X100.130 Y102.844 F10800.000 ; move inwards before travel
G1 X99.829 Y102.919 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.286011
G1 F2400.000
G1 X100.302 Y103.570 E0.01626 ; infill
;WIDTH:0.19172
G1 X100.456 Y103.772 E0.00315 ; infill
;WIDTH:0.241358
G1 X100.694 Y104.054 E0.00609 ; infill
;WIDTH:0.296993
G1 X100.948 Y104.357 E0.00834 ; infill
;WIDTH:0.330043
G1 X101.003 Y104.438 E0.00236 ; infill
;WIDTH:0.365881
G1 X101.113 Y104.634 E0.00604 ; infill
;WIDTH:0.401717
G1 X101.223 Y104.830 E0.00671 ; infill
G1 X101.321 Y105.090 E0.00827 ; infill
;WIDTH:0.278924
G1 X101.513 Y105.781 E0.01408 ; infill
;WIDTH:0.327066
G1 X101.580 Y105.997 E0.00534 ; infill
;WIDTH:0.381337
G1 X101.682 Y106.298 E0.00896 ; infill
;WIDTH:0.392145
G1 X101.712 Y106.366 E0.00214 ; infill
G1 X101.813 Y106.489 E0.00463 ; infill
;WIDTH:0.27772
G1 X102.117 Y106.859 E0.00935 ; infill
G1 X102.127 Y106.849 F10800.000 ; move to first infill point
;WIDTH:0.109378
G1 F2400.000
G1 X101.497 Y106.286 E0.00467 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.127 Y106.849 E-0.22298 ; wipe and retract
;WIPE_END
G1 E-2.17702 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X103.221 Y107.779 ; move to first infill point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.255087
G1 F2400.000
G1 X103.513 Y107.948 E0.00596 ; infill
;WIDTH:0.2997
G1 X104.078 Y108.276 E0.01396 ; infill
G1 X104.520 Y108.566 E0.01127 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.078 Y108.276 E-0.13929 ; wipe and retract
G1 X103.513 Y107.948 E-0.17249 ; wipe and retract
;WIPE_END
G1 E-2.08822 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 X100.419 Y103.847 ; move to first infill point
G1 Z17.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.37007
G1 F2400.000
G1 X99.952 Y103.076 E0.02454 ; infill
;WIDTH:0.325443
G1 X99.924 Y103.046 E0.00095 ; infill
;WIDTH:0.292464
G1 X99.906 Y103.014 E0.00077 ; infill
;WIDTH:0.256214
G1 X99.861 Y102.973 E0.00108 ; infill
;WIDTH:0.224457
G1 X99.816 Y102.931 E0.00092 ; infill
;LAYER_CHANGE
;Z:17.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;17.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.861 Y102.973 E-0.01609 ; wipe and retract
;WIPE_END
G1 E-2.38391 F2400.000 ; retract
G1 Z17.275 F10800.000 ; lift Z
G1 Z17.400 ; move to next layer (86)
;AFTER_LAYER_CHANGE
;17.4
G1 Z17.475 ; lift Z
G1 X103.258 Y107.786 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.413 Y107.724 E0.00773 ; perimeter
G1 X103.718 Y107.744 E0.01415 ; perimeter
G1 X104.167 Y107.883 E0.02177 ; perimeter
G1 X104.504 Y108.069 E0.01786 ; perimeter
G1 X104.822 Y108.318 E0.01866 ; perimeter
G1 X105.065 Y108.536 E0.01517 ; perimeter
G1 X105.112 Y108.604 E0.00380 ; perimeter
G1 X105.582 Y108.965 E0.02745 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.675 Y109.036 E0.00491 ; perimeter (bridge)
G1 X106.273 Y109.345 E0.02811 ; perimeter (bridge)
G1 X106.769 Y109.670 E0.02477 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.860 Y109.730 E0.00508 ; perimeter
G1 X106.980 Y109.724 E0.00556 ; perimeter
G1 X107.303 Y109.882 E0.01664 ; perimeter
G1 X107.431 Y109.817 E0.00664 ; perimeter
G1 X107.861 Y109.897 E0.02027 ; perimeter
G1 X107.931 Y109.944 E0.00389 ; perimeter
G1 X108.078 Y110.140 E0.01136 ; perimeter
G1 X108.094 Y110.366 E0.01050 ; perimeter
G1 X107.979 Y110.518 E0.00884 ; perimeter
G1 X107.723 Y110.657 E0.01349 ; perimeter
G1 X107.435 Y110.588 E0.01372 ; perimeter
G1 X107.271 Y110.500 E0.00862 ; perimeter
G1 X107.183 Y110.420 E0.00549 ; perimeter
G1 X107.076 Y110.269 E0.00860 ; perimeter
G1 X106.906 Y110.183 E0.00882 ; perimeter
G1 X106.628 Y109.923 E0.01763 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.458 Y109.789 E0.00908 ; perimeter (bridge)
G1 X105.449 Y109.292 E0.04699 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.259 Y109.188 E0.01004 ; perimeter
G1 X104.696 Y108.981 E0.02778 ; perimeter
G1 X104.460 Y108.923 E0.01128 ; perimeter
G1 X103.934 Y108.673 E0.02696 ; perimeter
G1 X103.518 Y108.351 E0.02438 ; perimeter
G1 X103.469 Y108.277 E0.00412 ; perimeter
G1 X103.432 Y108.169 E0.00527 ; perimeter
G1 X103.314 Y108.033 E0.00836 ; perimeter
G1 X103.272 Y107.845 E0.00892 ; perimeter
G1 X103.424 Y107.808 F10800.000 ; move inwards before travel
G1 X103.693 Y108.179 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.204315
G1 F2400.000
G1 X103.735 Y108.149 E0.00068 ; infill
;WIDTH:0.24338
G1 X103.776 Y108.119 E0.00085 ; infill
;WIDTH:0.277521
G1 X104.580 Y108.584 E0.01812 ; infill
G1 X104.919 Y108.748 E0.00734 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.580 Y108.584 E-0.09933 ; wipe and retract
G1 X103.776 Y108.119 E-0.24507 ; wipe and retract
;WIPE_END
G1 E-2.05560 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X102.261 Y106.769 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.154 Y106.908 E0.00815 ; perimeter
G1 X101.982 Y106.875 E0.00813 ; perimeter
G1 X101.628 Y106.754 E0.01734 ; perimeter
G1 X101.325 Y106.501 E0.01824 ; perimeter
G1 X101.216 Y106.193 E0.01513 ; perimeter
G1 X101.078 Y105.588 E0.02876 ; perimeter
G1 X100.978 Y105.302 E0.01404 ; perimeter
G1 X100.670 Y104.616 E0.03484 ; perimeter
G1 X99.879 Y103.691 E0.05640 ; perimeter
G1 X99.686 Y103.433 E0.01489 ; perimeter
G1 X99.570 Y103.088 E0.01687 ; perimeter
G1 X99.581 Y102.891 E0.00913 ; perimeter
G1 X99.615 Y102.819 E0.00369 ; perimeter
G1 X99.737 Y102.723 E0.00718 ; perimeter
G1 X99.889 Y102.661 E0.00761 ; perimeter
G1 X99.986 Y102.682 E0.00462 ; perimeter
G1 X100.072 Y102.669 E0.00404 ; perimeter
G1 X100.232 Y102.764 E0.00861 ; perimeter
G1 X100.412 Y102.999 E0.01369 ; perimeter
G1 X100.475 Y103.134 E0.00694 ; perimeter
G1 X100.748 Y103.542 E0.02273 ; perimeter
G1 X101.190 Y104.018 E0.03007 ; perimeter
G1 X101.583 Y104.601 E0.03256 ; perimeter
G1 X101.751 Y105.116 E0.02513 ; perimeter
G1 X101.851 Y105.611 E0.02335 ; perimeter
G1 X102.082 Y106.208 E0.02968 ; perimeter
G1 X102.154 Y106.342 E0.00704 ; perimeter
G1 X102.177 Y106.648 E0.01422 ; perimeter
G1 X102.227 Y106.719 E0.00404 ; perimeter
G1 X102.088 Y106.798 F10800.000 ; move inwards before travel
G1 X101.927 Y106.544 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.269202
G1 F2400.000
G1 X101.805 Y106.440 E0.00303 ; infill
G1 X101.400 Y105.917 E0.01244 ; infill
G1 X101.776 Y106.550 F10800.000 ; move to first infill point
;WIDTH:0.36906
G1 F2400.000
G1 X101.548 Y105.904 E0.01857 ; infill
;WIDTH:0.336704
G1 X101.494 Y105.727 E0.00453 ; infill
;WIDTH:0.309785
G1 X101.344 Y105.149 E0.01324 ; infill
G1 X101.204 Y104.786 E0.00864 ; infill
G1 X101.005 Y104.428 E0.00909 ; infill
G1 X100.882 Y104.262 E0.00457 ; infill
G1 X100.444 Y103.769 E0.01464 ; infill
G1 X100.127 Y103.345 E0.01174 ; infill
G1 X99.979 Y103.078 E0.00679 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.127 Y103.345 E-0.08069 ; wipe and retract
G1 X100.444 Y103.769 E-0.13959 ; wipe and retract
G1 X100.882 Y104.262 E-0.17410 ; wipe and retract
G1 X101.005 Y104.428 E-0.05440 ; wipe and retract
G1 X101.204 Y104.786 E-0.10804 ; wipe and retract
G1 X101.344 Y105.149 E-0.10276 ; wipe and retract
G1 X101.494 Y105.727 E-0.15750 ; wipe and retract
;WIPE_END
G1 E-1.58292 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X99.003 Y100.147 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.893 Y100.150 E0.00510 ; perimeter
G1 X98.733 Y100.078 E0.00815 ; perimeter
G1 X98.644 Y100.013 E0.00507 ; perimeter
G1 X98.595 Y99.903 E0.00557 ; perimeter
G1 X98.574 Y99.628 E0.01278 ; perimeter
G1 X98.680 Y99.376 E0.01269 ; perimeter
G1 X98.807 Y99.280 E0.00735 ; perimeter
G1 X99.043 Y99.213 E0.01137 ; perimeter
G1 X99.168 Y99.257 E0.00611 ; perimeter
G1 X99.323 Y99.540 E0.01497 ; perimeter
G1 X99.366 Y99.721 E0.00860 ; perimeter
G1 X99.338 Y99.859 E0.00652 ; perimeter
G1 X99.237 Y100.015 E0.00862 ; perimeter
G1 X99.056 Y100.118 E0.00966 ; perimeter
G1 X98.926 Y100.068 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.893 Y100.150 E-0.04366 ; wipe and retract
G1 X98.733 Y100.078 E-0.04641 ; wipe and retract
G1 X98.644 Y100.013 E-0.02886 ; wipe and retract
G1 X98.595 Y99.903 E-0.03175 ; wipe and retract
G1 X98.574 Y99.628 E-0.07280 ; wipe and retract
G1 X98.680 Y99.376 E-0.07230 ; wipe and retract
G1 X98.807 Y99.280 E-0.04190 ; wipe and retract
G1 X99.043 Y99.213 E-0.06477 ; wipe and retract
G1 X99.168 Y99.257 E-0.03480 ; wipe and retract
G1 X99.323 Y99.540 E-0.08527 ; wipe and retract
G1 X99.366 Y99.721 E-0.04898 ; wipe and retract
G1 X99.338 Y99.859 E-0.03716 ; wipe and retract
G1 X99.237 Y100.015 E-0.04910 ; wipe and retract
G1 X99.056 Y100.118 E-0.05502 ; wipe and retract
;WIPE_END
G1 E-1.68724 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X99.294 Y97.554 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.146 Y97.521 E0.00703 ; perimeter
G1 X99.096 Y97.479 E0.00304 ; perimeter
G1 X99.008 Y97.241 E0.01175 ; perimeter
G1 X99.012 Y97.054 E0.00867 ; perimeter
G1 X99.108 Y96.798 E0.01266 ; perimeter
G1 X99.308 Y96.575 E0.01388 ; perimeter
G1 X99.613 Y96.413 E0.01597 ; perimeter
G1 X100.001 Y96.310 E0.01858 ; perimeter
G1 X100.070 Y96.353 E0.00378 ; perimeter
G1 X100.040 Y96.536 E0.00858 ; perimeter
G1 X100.049 Y96.586 E0.00234 ; perimeter
G1 X99.993 Y96.732 E0.00726 ; perimeter
G1 X99.961 Y96.921 E0.00889 ; perimeter
G1 X99.887 Y97.054 E0.00704 ; perimeter
G1 X99.829 Y97.222 E0.00823 ; perimeter
G1 X99.653 Y97.398 E0.01150 ; perimeter
G1 X99.349 Y97.530 E0.01536 ; perimeter
G1 X99.214 Y97.426 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.146 Y97.521 E-0.05362 ; wipe and retract
G1 X99.096 Y97.479 E-0.01733 ; wipe and retract
G1 X99.008 Y97.241 E-0.06695 ; wipe and retract
G1 X99.012 Y97.054 E-0.04938 ; wipe and retract
G1 X99.108 Y96.798 E-0.07211 ; wipe and retract
G1 X99.308 Y96.575 E-0.07905 ; wipe and retract
G1 X99.613 Y96.413 E-0.09096 ; wipe and retract
G1 X100.001 Y96.310 E-0.10587 ; wipe and retract
G1 X100.070 Y96.353 E-0.02152 ; wipe and retract
G1 X100.040 Y96.536 E-0.04890 ; wipe and retract
G1 X100.049 Y96.586 E-0.01335 ; wipe and retract
G1 X99.993 Y96.732 E-0.04134 ; wipe and retract
G1 X99.961 Y96.921 E-0.05066 ; wipe and retract
G1 X99.887 Y97.054 E-0.04010 ; wipe and retract
G1 X99.829 Y97.222 E-0.04690 ; wipe and retract
G1 X99.653 Y97.398 E-0.06552 ; wipe and retract
G1 X99.349 Y97.530 E-0.08751 ; wipe and retract
;WIPE_END
G1 E-1.44892 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X102.260 Y94.598 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.326 Y94.709 E0.00597 ; perimeter
G1 X102.339 Y94.815 E0.00496 ; perimeter
G1 X102.303 Y95.014 E0.00934 ; perimeter
G1 X102.241 Y95.116 E0.00554 ; perimeter
G1 X102.081 Y95.224 E0.00894 ; perimeter
G1 X101.562 Y95.494 E0.02711 ; perimeter
G1 X101.440 Y95.531 E0.00592 ; perimeter
G1 X101.328 Y95.532 E0.00517 ; perimeter
G1 X101.143 Y95.610 E0.00932 ; perimeter
G1 X100.730 Y95.686 E0.01947 ; perimeter
G1 X100.731 Y95.590 E0.00446 ; perimeter
G1 X100.846 Y95.269 E0.01580 ; perimeter
G1 X100.990 Y94.987 E0.01468 ; perimeter
G1 X101.224 Y94.746 E0.01556 ; perimeter
G1 X101.481 Y94.588 E0.01396 ; perimeter
G1 X101.720 Y94.475 E0.01223 ; perimeter
G1 X101.872 Y94.467 E0.00706 ; perimeter
G1 X102.101 Y94.513 E0.01083 ; perimeter
G1 X102.207 Y94.570 E0.00560 ; perimeter
G1 X102.225 Y94.722 F10800.000 ; move inwards before travel
G1 X102.091 Y94.833 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.327874
G1 F2400.000
G1 X101.882 Y94.883 E0.00510 ; infill
G1 X101.350 Y94.962 E0.01274 ; infill
G1 X101.090 Y95.320 F10800.000 ; move to first infill point
;WIDTH:0.356226
G1 F2400.000
G1 X101.411 Y95.124 E0.00979 ; infill
;WIDTH:0.385302
G1 X101.484 Y95.070 E0.00260 ; infill
;WIDTH:0.396102
G1 X101.822 Y94.888 E0.01127 ; infill
G1 X101.809 Y94.712 E0.00520 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.822 Y94.888 E-0.04676 ; wipe and retract
G1 X101.484 Y95.070 E-0.10124 ; wipe and retract
;WIPE_END
G1 E-2.25200 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X99.712 Y96.648 ; move to first infill point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.326407
G1 F2400.000
G1 X99.289 Y97.277 E0.01786 ; infill
G1 X99.279 Y97.255 F10800.000 ; move to first infill point
;WIDTH:0.108628
G1 F2400.000
G1 X99.691 Y96.711 E0.00373 ; infill
G1 X99.764 Y96.640 E0.00056 ; infill
G1 X99.751 Y96.717 F10800.000 ; move to first infill point
;WIDTH:0.378947
G1 F2400.000
G1 X99.264 Y97.220 E0.01959 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.751 Y96.717 E-0.18500 ; wipe and retract
;WIPE_END
G1 E-2.21500 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X104.797 Y94.775 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.685 Y94.651 E0.00775 ; perimeter
G1 X104.644 Y94.529 E0.00597 ; perimeter
G1 X104.649 Y94.296 E0.01077 ; perimeter
G1 X104.723 Y94.174 E0.00664 ; perimeter
G1 X104.876 Y94.084 E0.00823 ; perimeter
G1 X105.137 Y94.071 E0.01209 ; perimeter
G1 X105.270 Y94.112 E0.00644 ; perimeter
G1 X105.372 Y94.186 E0.00583 ; perimeter
G1 X105.529 Y94.418 E0.01299 ; perimeter
G1 X105.520 Y94.491 E0.00341 ; perimeter
G1 X105.560 Y94.576 E0.00438 ; perimeter
G1 X105.501 Y94.698 E0.00627 ; perimeter
G1 X105.443 Y94.781 E0.00471 ; perimeter
G1 X105.320 Y94.792 E0.00569 ; perimeter
G1 X105.203 Y94.863 E0.00635 ; perimeter
G1 X105.074 Y94.875 E0.00600 ; perimeter
G1 X104.950 Y94.850 E0.00587 ; perimeter
G1 X104.851 Y94.802 E0.00511 ; perimeter
G1 X104.822 Y94.610 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.685 Y94.651 E-0.05915 ; wipe and retract
G1 X104.644 Y94.529 E-0.03403 ; wipe and retract
G1 X104.649 Y94.296 E-0.06136 ; wipe and retract
G1 X104.723 Y94.174 E-0.03785 ; wipe and retract
G1 X104.876 Y94.084 E-0.04689 ; wipe and retract
G1 X105.137 Y94.071 E-0.06890 ; wipe and retract
G1 X105.270 Y94.112 E-0.03669 ; wipe and retract
G1 X105.372 Y94.186 E-0.03321 ; wipe and retract
G1 X105.529 Y94.418 E-0.07402 ; wipe and retract
G1 X105.520 Y94.491 E-0.01944 ; wipe and retract
G1 X105.560 Y94.576 E-0.02496 ; wipe and retract
G1 X105.501 Y94.698 E-0.03570 ; wipe and retract
G1 X105.443 Y94.781 E-0.02685 ; wipe and retract
G1 X105.320 Y94.792 E-0.03244 ; wipe and retract
G1 X105.203 Y94.863 E-0.03616 ; wipe and retract
G1 X105.074 Y94.875 E-0.03419 ; wipe and retract
G1 X104.950 Y94.850 E-0.03343 ; wipe and retract
G1 X104.851 Y94.802 E-0.02911 ; wipe and retract
;WIPE_END
G1 E-1.67564 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X107.078 Y95.532 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.142 Y95.369 E0.00811 ; perimeter
G1 X107.381 Y95.208 E0.01337 ; perimeter
G1 X107.556 Y95.170 E0.00828 ; perimeter
G1 X107.807 Y95.170 E0.01161 ; perimeter
G1 X107.998 Y95.216 E0.00910 ; perimeter
G1 X108.232 Y95.327 E0.01201 ; perimeter
G1 X108.305 Y95.384 E0.00429 ; perimeter
G1 X108.412 Y95.536 E0.00861 ; perimeter
G1 X108.435 Y95.618 E0.00392 ; perimeter
G1 X108.427 Y95.779 E0.00747 ; perimeter
G1 X108.334 Y95.888 E0.00665 ; perimeter
G1 X107.979 Y96.006 E0.01734 ; perimeter
G1 X107.645 Y95.987 E0.01549 ; perimeter
G1 X107.420 Y95.900 E0.01118 ; perimeter
G1 X107.225 Y95.749 E0.01142 ; perimeter
G1 X107.092 Y95.619 E0.00863 ; perimeter
G1 X107.087 Y95.591 E0.00130 ; perimeter
G1 X107.234 Y95.452 F10800.000 ; move inwards before travel
G1 X107.352 Y95.535 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341762
G1 F2400.000
G1 X108.163 Y95.601 E0.02022 ; infill
G1 X108.178 Y95.623 F10800.000 ; move to first infill point
;WIDTH:0.343197
G1 F2400.000
G1 X107.926 Y95.611 E0.00629 ; infill
G1 X107.394 Y95.500 E0.01357 ; infill
G1 X107.385 Y95.507 F10800.000 ; move to first infill point
;WIDTH:0.253803
G1 F2400.000
G1 X108.187 Y95.644 E0.01427 ; infill
G1 X109.751 Y96.385 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.878 Y96.237 E0.00901 ; perimeter
G1 X110.143 Y96.150 E0.01290 ; perimeter
G1 X110.388 Y96.192 E0.01153 ; perimeter
G1 X110.561 Y96.281 E0.00902 ; perimeter
G1 X110.704 Y96.376 E0.00796 ; perimeter
G1 X110.980 Y96.651 E0.01804 ; perimeter
G1 X111.208 Y96.796 E0.01250 ; perimeter
G1 X111.458 Y96.878 E0.01219 ; perimeter
G1 X111.730 Y97.057 E0.01508 ; perimeter
G1 X111.865 Y97.234 E0.01032 ; perimeter
G1 X111.921 Y97.454 E0.01051 ; perimeter
G1 X111.890 Y97.747 E0.01364 ; perimeter
G1 X111.765 Y97.922 E0.00994 ; perimeter
G1 X111.687 Y97.949 E0.00385 ; perimeter
G1 X111.523 Y97.937 E0.00759 ; perimeter
G1 X111.317 Y97.824 E0.01090 ; perimeter
G1 X111.016 Y97.415 E0.02351 ; perimeter
G1 X110.845 Y97.285 E0.00998 ; perimeter
G1 X110.650 Y97.187 E0.01008 ; perimeter
G1 X110.307 Y97.086 E0.01658 ; perimeter
G1 X110.186 Y97.089 E0.00556 ; perimeter
G1 X109.976 Y97.006 E0.01046 ; perimeter
G1 X109.786 Y96.833 E0.01191 ; perimeter
G1 X109.727 Y96.722 E0.00583 ; perimeter
G1 X109.710 Y96.567 E0.00723 ; perimeter
G1 X109.738 Y96.443 E0.00589 ; perimeter
G1 X109.946 Y96.379 F10800.000 ; move inwards before travel
G1 X111.040 Y96.975 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.402474
G1 F2400.000
G1 X110.342 Y96.654 E0.02297 ; infill
G1 X109.959 Y96.561 E0.01178 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.342 Y96.654 E-0.10398 ; wipe and retract
G1 X111.040 Y96.975 E-0.20272 ; wipe and retract
;WIPE_END
G1 E-2.09330 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X113.154 Y99.937 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.237 Y99.947 E0.00385 ; perimeter
G1 X113.429 Y99.871 E0.00956 ; perimeter
G1 X113.463 Y99.880 E0.00164 ; perimeter
G1 X113.662 Y100.001 E0.01080 ; perimeter
G1 X113.899 Y100.351 E0.01957 ; perimeter
G1 X113.928 Y100.586 E0.01096 ; perimeter
G1 X113.914 Y100.680 E0.00441 ; perimeter
G1 X113.705 Y100.877 E0.01329 ; perimeter
G1 X113.299 Y100.866 E0.01883 ; perimeter
G1 X113.119 Y100.733 E0.01038 ; perimeter
G1 X113.010 Y100.560 E0.00945 ; perimeter
G1 X112.976 Y100.371 E0.00890 ; perimeter
G1 X113.028 Y100.099 E0.01281 ; perimeter
G1 X113.118 Y99.984 E0.00675 ; perimeter
G1 X113.216 Y99.993 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.237 Y99.947 E-0.03302 ; wipe and retract
G1 X113.429 Y99.871 E-0.05447 ; wipe and retract
G1 X113.463 Y99.880 E-0.00933 ; wipe and retract
G1 X113.662 Y100.001 E-0.06153 ; wipe and retract
G1 X113.899 Y100.351 E-0.11148 ; wipe and retract
G1 X113.928 Y100.586 E-0.06244 ; wipe and retract
G1 X113.914 Y100.680 E-0.02513 ; wipe and retract
G1 X113.705 Y100.877 E-0.07573 ; wipe and retract
G1 X113.299 Y100.866 E-0.10728 ; wipe and retract
G1 X113.119 Y100.733 E-0.05914 ; wipe and retract
G1 X113.010 Y100.560 E-0.05382 ; wipe and retract
G1 X112.976 Y100.371 E-0.05069 ; wipe and retract
G1 X113.028 Y100.099 E-0.07298 ; wipe and retract
G1 X113.118 Y99.984 E-0.03844 ; wipe and retract
;WIPE_END
G1 E-1.58452 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X115.309 Y105.472 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.201 Y105.371 E0.00686 ; perimeter
G1 X115.122 Y105.212 E0.00823 ; perimeter
G1 X115.063 Y104.951 E0.01239 ; perimeter
G1 X115.054 Y104.583 E0.01702 ; perimeter
G1 X115.120 Y104.384 E0.00974 ; perimeter
G1 X115.266 Y104.159 E0.01241 ; perimeter
G1 X115.358 Y104.119 E0.00464 ; perimeter
G1 X115.503 Y104.269 E0.00967 ; perimeter
G1 X115.572 Y104.279 E0.00323 ; perimeter
G1 X115.675 Y104.473 E0.01017 ; perimeter
G1 X115.783 Y104.593 E0.00748 ; perimeter
G1 X115.863 Y104.785 E0.00963 ; perimeter
G1 X115.892 Y105.175 E0.01814 ; perimeter
G1 X115.846 Y105.332 E0.00758 ; perimeter
G1 X115.685 Y105.464 E0.00964 ; perimeter
G1 X115.504 Y105.506 E0.00861 ; perimeter
G1 X115.368 Y105.483 E0.00641 ; perimeter
G1 X115.305 Y105.324 F10800.000 ; move inwards before travel
G1 X115.588 Y105.232 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.246316
G1 F2400.000
G1 X115.393 Y104.657 E0.01027 ; infill
;WIDTH:0.232232
G1 X115.343 Y104.475 E0.00297 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.393 Y104.657 E-0.04978 ; wipe and retract
;WIPE_END
G1 E-2.35022 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X115.643 Y111.599 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.759 Y111.670 E0.00632 ; perimeter
G1 X115.844 Y111.771 E0.00611 ; perimeter
G1 X115.897 Y111.959 E0.00907 ; perimeter
G1 X115.892 Y112.111 E0.00703 ; perimeter
G1 X115.813 Y112.290 E0.00909 ; perimeter
G1 X115.719 Y112.375 E0.00587 ; perimeter
G1 X115.592 Y112.420 E0.00624 ; perimeter
G1 X115.476 Y112.418 E0.00536 ; perimeter
G1 X115.266 Y112.334 E0.01049 ; perimeter
G1 X115.180 Y112.214 E0.00682 ; perimeter
G1 X115.139 Y112.035 E0.00853 ; perimeter
G1 X115.140 Y111.933 E0.00471 ; perimeter
G1 X115.208 Y111.734 E0.00972 ; perimeter
G1 X115.333 Y111.618 E0.00790 ; perimeter
G1 X115.411 Y111.590 E0.00386 ; perimeter
G1 X115.584 Y111.587 E0.00800 ; perimeter
G1 X115.667 Y111.733 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.759 Y111.670 E-0.05118 ; wipe and retract
G1 X115.844 Y111.771 E-0.03482 ; wipe and retract
G1 X115.897 Y111.959 E-0.05166 ; wipe and retract
G1 X115.892 Y112.111 E-0.04003 ; wipe and retract
G1 X115.813 Y112.290 E-0.05177 ; wipe and retract
G1 X115.719 Y112.375 E-0.03343 ; wipe and retract
G1 X115.592 Y112.420 E-0.03553 ; wipe and retract
G1 X115.476 Y112.418 E-0.03056 ; wipe and retract
G1 X115.266 Y112.334 E-0.05978 ; wipe and retract
G1 X115.180 Y112.214 E-0.03884 ; wipe and retract
G1 X115.139 Y112.035 E-0.04860 ; wipe and retract
G1 X115.140 Y111.933 E-0.02683 ; wipe and retract
G1 X115.208 Y111.734 E-0.05536 ; wipe and retract
G1 X115.333 Y111.618 E-0.04503 ; wipe and retract
G1 X115.411 Y111.590 E-0.02200 ; wipe and retract
G1 X115.584 Y111.587 E-0.04557 ; wipe and retract
;WIPE_END
G1 E-1.72901 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X115.481 Y114.459 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.648 Y114.497 E0.00792 ; perimeter
G1 X115.798 Y114.654 E0.01008 ; perimeter
G1 X115.839 Y114.756 E0.00510 ; perimeter
G1 X115.839 Y114.934 E0.00823 ; perimeter
G1 X115.753 Y115.147 E0.01064 ; perimeter
G1 X115.443 Y115.472 E0.02082 ; perimeter
G1 X115.160 Y115.828 E0.02106 ; perimeter
G1 X115.071 Y115.898 E0.00526 ; perimeter
G1 X114.930 Y115.955 E0.00706 ; perimeter
G1 X114.789 Y115.965 E0.00654 ; perimeter
G1 X114.658 Y115.934 E0.00624 ; perimeter
G1 X114.520 Y115.831 E0.00797 ; perimeter
G1 X114.501 Y115.792 E0.00202 ; perimeter
G1 X114.434 Y115.607 E0.00912 ; perimeter
G1 X114.443 Y115.418 E0.00877 ; perimeter
G1 X114.503 Y115.313 E0.00557 ; perimeter
G1 X114.828 Y114.966 E0.02202 ; perimeter
G1 X115.079 Y114.662 E0.01826 ; perimeter
G1 X115.256 Y114.503 E0.01102 ; perimeter
G1 X115.422 Y114.470 E0.00784 ; perimeter
G1 X115.568 Y114.606 F10800.000 ; move inwards before travel
G1 X115.504 Y114.711 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.272824
G1 F2400.000
G1 X115.444 Y114.875 E0.00334 ; infill
;WIDTH:0.370658
G1 X115.147 Y115.205 E0.01209 ; infill
;WIDTH:0.357543
G1 X114.849 Y115.545 E0.01185 ; infill
G1 X113.328 Y115.662 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.306 Y115.880 E0.01012 ; perimeter
G1 X113.215 Y116.024 E0.00790 ; perimeter
G1 X113.082 Y116.119 E0.00757 ; perimeter
G1 X112.924 Y116.156 E0.00750 ; perimeter
G1 X112.568 Y116.101 E0.01668 ; perimeter
G1 X112.448 Y116.002 E0.00721 ; perimeter
G1 X112.385 Y115.854 E0.00746 ; perimeter
G1 X112.382 Y115.679 E0.00811 ; perimeter
G1 X112.436 Y115.533 E0.00719 ; perimeter
G1 X112.514 Y115.458 E0.00499 ; perimeter
G1 X112.675 Y115.387 E0.00815 ; perimeter
G1 X112.833 Y115.361 E0.00746 ; perimeter
G1 X112.998 Y115.385 E0.00769 ; perimeter
G1 X113.192 Y115.465 E0.00974 ; perimeter
G1 X113.254 Y115.512 E0.00362 ; perimeter
G1 X113.301 Y115.609 E0.00497 ; perimeter
G1 X113.155 Y115.796 F10800.000 ; move inwards before travel
G1 X112.881 Y115.764 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343993
G1 F2400.000
G1 X112.784 Y115.755 E0.00244 ; infill
;WIDTH:0.323034
G1 X112.756 Y115.758 E0.00066 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.784 Y115.755 E-0.00750 ; wipe and retract
;WIPE_END
G1 E-2.39250 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 X110.513 Y113.252 ; move to first perimeter point
G1 Z17.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.428 Y113.295 E0.00443 ; perimeter
G1 X110.258 Y113.319 E0.00793 ; perimeter
G1 X109.945 Y113.224 E0.01516 ; perimeter
G1 X109.744 Y113.010 E0.01361 ; perimeter
G1 X109.670 Y112.813 E0.00975 ; perimeter
G1 X109.672 Y112.713 E0.00462 ; perimeter
G1 X109.737 Y112.550 E0.00815 ; perimeter
G1 X109.928 Y112.449 E0.01002 ; perimeter
G1 X110.121 Y112.450 E0.00894 ; perimeter
G1 X110.292 Y112.503 E0.00830 ; perimeter
G1 X110.479 Y112.627 E0.01040 ; perimeter
G1 X110.608 Y112.831 E0.01117 ; perimeter
G1 X110.628 Y113.041 E0.00977 ; perimeter
G1 X110.554 Y113.209 E0.00850 ; perimeter
G1 X110.422 Y113.225 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:17.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;17.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.428 Y113.295 E-0.04045 ; wipe and retract
G1 X110.258 Y113.319 E-0.04517 ; wipe and retract
G1 X109.945 Y113.224 E-0.08635 ; wipe and retract
G1 X109.744 Y113.010 E-0.07754 ; wipe and retract
G1 X109.670 Y112.813 E-0.05555 ; wipe and retract
G1 X109.672 Y112.713 E-0.02630 ; wipe and retract
G1 X109.737 Y112.550 E-0.04642 ; wipe and retract
G1 X109.928 Y112.449 E-0.05706 ; wipe and retract
G1 X110.121 Y112.450 E-0.05094 ; wipe and retract
G1 X110.292 Y112.503 E-0.04726 ; wipe and retract
G1 X110.479 Y112.627 E-0.05923 ; wipe and retract
G1 X110.608 Y112.831 E-0.06362 ; wipe and retract
G1 X110.628 Y113.041 E-0.05568 ; wipe and retract
G1 X110.554 Y113.209 E-0.04840 ; wipe and retract
;WIPE_END
G1 E-1.64004 F2400.000 ; retract
G1 Z17.475 F10800.000 ; lift Z
G1 Z17.600 ; move to next layer (87)
;AFTER_LAYER_CHANGE
;17.6
G1 Z17.675 ; lift Z
G1 X115.137 Y112.029 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.136 Y111.899 E0.00601 ; perimeter
G1 X115.187 Y111.729 E0.00824 ; perimeter
G1 X115.265 Y111.615 E0.00642 ; perimeter
G1 X115.374 Y111.548 E0.00591 ; perimeter
G1 X115.536 Y111.531 E0.00752 ; perimeter
G1 X115.704 Y111.579 E0.00811 ; perimeter
G1 X115.810 Y111.667 E0.00640 ; perimeter
G1 X115.852 Y111.731 E0.00351 ; perimeter
G1 X115.894 Y111.882 E0.00726 ; perimeter
G1 X115.891 Y112.063 E0.00839 ; perimeter
G1 X115.813 Y112.238 E0.00890 ; perimeter
G1 X115.714 Y112.328 E0.00618 ; perimeter
G1 X115.631 Y112.364 E0.00421 ; perimeter
G1 X115.449 Y112.364 E0.00840 ; perimeter
G1 X115.276 Y112.291 E0.00873 ; perimeter
G1 X115.186 Y112.170 E0.00696 ; perimeter
G1 X115.156 Y112.086 E0.00415 ; perimeter
G1 X115.237 Y111.946 F10800.000 ; move inwards before travel
G1 X115.518 Y111.911 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311258
G1 F2400.000
G1 X115.517 Y111.989 E0.00174 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.518 Y111.911 E-0.02058 ; wipe and retract
;WIPE_END
G1 E-2.37942 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X115.482 Y114.464 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.649 Y114.507 E0.00799 ; perimeter
G1 X115.795 Y114.663 E0.00991 ; perimeter
G1 X115.836 Y114.769 E0.00524 ; perimeter
G1 X115.836 Y114.937 E0.00781 ; perimeter
G1 X115.800 Y115.063 E0.00607 ; perimeter
G1 X115.752 Y115.150 E0.00459 ; perimeter
G1 X115.435 Y115.492 E0.02162 ; perimeter
G1 X115.166 Y115.828 E0.01993 ; perimeter
G1 X115.075 Y115.899 E0.00535 ; perimeter
G1 X114.937 Y115.953 E0.00682 ; perimeter
G1 X114.788 Y115.962 E0.00696 ; perimeter
G1 X114.653 Y115.930 E0.00640 ; perimeter
G1 X114.510 Y115.832 E0.00804 ; perimeter
G1 X114.433 Y115.622 E0.01033 ; perimeter
G1 X114.444 Y115.426 E0.00914 ; perimeter
G1 X114.536 Y115.276 E0.00811 ; perimeter
G1 X115.068 Y114.675 E0.03720 ; perimeter
G1 X115.272 Y114.504 E0.01231 ; perimeter
G1 X115.423 Y114.475 E0.00713 ; perimeter
G1 X115.566 Y114.614 F10800.000 ; move inwards before travel
G1 X115.544 Y114.748 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.336347
G1 F2400.000
G1 X115.421 Y114.910 E0.00497 ; infill
G1 X114.820 Y115.582 E0.02200 ; infill
;WIDTH:0.314306
G1 X114.773 Y115.635 E0.00159 ; infill
;WIDTH:0.280015
G1 X114.726 Y115.688 E0.00139 ; infill
G1 X113.436 Y115.664 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.413 Y115.861 E0.00921 ; perimeter
G1 X113.300 Y116.037 E0.00968 ; perimeter
G1 X113.178 Y116.120 E0.00685 ; perimeter
G1 X113.037 Y116.155 E0.00674 ; perimeter
G1 X112.917 Y116.155 E0.00555 ; perimeter
G1 X112.669 Y116.103 E0.01176 ; perimeter
G1 X112.542 Y116.000 E0.00754 ; perimeter
G1 X112.487 Y115.883 E0.00596 ; perimeter
G1 X112.475 Y115.703 E0.00838 ; perimeter
G1 X112.546 Y115.515 E0.00932 ; perimeter
G1 X112.608 Y115.459 E0.00387 ; perimeter
G1 X112.780 Y115.384 E0.00868 ; perimeter
G1 X112.933 Y115.360 E0.00716 ; perimeter
G1 X113.137 Y115.390 E0.00956 ; perimeter
G1 X113.263 Y115.444 E0.00636 ; perimeter
G1 X113.351 Y115.511 E0.00512 ; perimeter
G1 X113.407 Y115.611 E0.00530 ; perimeter
G1 X113.280 Y115.787 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.413 Y115.861 E-0.06595 ; wipe and retract
G1 X113.300 Y116.037 E-0.05517 ; wipe and retract
G1 X113.178 Y116.120 E-0.03901 ; wipe and retract
G1 X113.037 Y116.155 E-0.03840 ; wipe and retract
G1 X112.917 Y116.155 E-0.03163 ; wipe and retract
G1 X112.669 Y116.103 E-0.06698 ; wipe and retract
G1 X112.542 Y116.000 E-0.04298 ; wipe and retract
G1 X112.487 Y115.883 E-0.03395 ; wipe and retract
G1 X112.475 Y115.703 E-0.04774 ; wipe and retract
G1 X112.546 Y115.515 E-0.05308 ; wipe and retract
G1 X112.608 Y115.459 E-0.02204 ; wipe and retract
G1 X112.780 Y115.384 E-0.04946 ; wipe and retract
G1 X112.933 Y115.360 E-0.04080 ; wipe and retract
G1 X113.137 Y115.390 E-0.05446 ; wipe and retract
G1 X113.263 Y115.444 E-0.03622 ; wipe and retract
G1 X113.351 Y115.511 E-0.02919 ; wipe and retract
G1 X113.407 Y115.611 E-0.03022 ; wipe and retract
;WIPE_END
G1 E-1.66273 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X110.675 Y113.254 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.610 Y113.320 E0.00429 ; perimeter
G1 X110.499 Y113.369 E0.00563 ; perimeter
G1 X110.395 Y113.386 E0.00491 ; perimeter
G1 X110.274 Y113.375 E0.00563 ; perimeter
G1 X110.089 Y113.321 E0.00893 ; perimeter
G1 X110.004 Y113.268 E0.00465 ; perimeter
G1 X109.841 Y113.087 E0.01124 ; perimeter
G1 X109.774 Y112.911 E0.00873 ; perimeter
G1 X109.771 Y112.780 E0.00605 ; perimeter
G1 X109.797 Y112.682 E0.00472 ; perimeter
G1 X109.868 Y112.589 E0.00543 ; perimeter
G1 X110.028 Y112.516 E0.00813 ; perimeter
G1 X110.252 Y112.525 E0.01040 ; perimeter
G1 X110.341 Y112.553 E0.00429 ; perimeter
G1 X110.557 Y112.686 E0.01177 ; perimeter
G1 X110.711 Y112.934 E0.01352 ; perimeter
G1 X110.731 Y113.039 E0.00498 ; perimeter
G1 X110.695 Y113.197 E0.00750 ; perimeter
G1 X110.583 Y113.251 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.610 Y113.320 E-0.03938 ; wipe and retract
G1 X110.499 Y113.369 E-0.03210 ; wipe and retract
G1 X110.395 Y113.386 E-0.02796 ; wipe and retract
G1 X110.274 Y113.375 E-0.03205 ; wipe and retract
G1 X110.089 Y113.321 E-0.05089 ; wipe and retract
G1 X110.004 Y113.268 E-0.02647 ; wipe and retract
G1 X109.841 Y113.087 E-0.06405 ; wipe and retract
G1 X109.774 Y112.911 E-0.04974 ; wipe and retract
G1 X109.771 Y112.780 E-0.03447 ; wipe and retract
G1 X109.797 Y112.682 E-0.02687 ; wipe and retract
G1 X109.868 Y112.589 E-0.03091 ; wipe and retract
G1 X110.028 Y112.516 E-0.04630 ; wipe and retract
G1 X110.252 Y112.525 E-0.05923 ; wipe and retract
G1 X110.341 Y112.553 E-0.02445 ; wipe and retract
G1 X110.557 Y112.686 E-0.06706 ; wipe and retract
G1 X110.711 Y112.934 E-0.07700 ; wipe and retract
G1 X110.731 Y113.039 E-0.02840 ; wipe and retract
G1 X110.695 Y113.197 E-0.04270 ; wipe and retract
;WIPE_END
G1 E-1.63998 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X108.087 Y110.348 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.931 Y110.579 E0.01290 ; perimeter
G1 X107.751 Y110.677 E0.00947 ; perimeter
G1 X107.446 Y110.618 E0.01438 ; perimeter
G1 X107.166 Y110.468 E0.01473 ; perimeter
G1 X107.048 Y110.339 E0.00810 ; perimeter
G1 X106.707 Y110.168 E0.01769 ; perimeter
G1 X106.657 Y110.117 E0.00329 ; perimeter
G1 X105.715 Y109.590 E0.05002 ; perimeter
G1 X105.192 Y109.316 E0.02734 ; perimeter
G1 X104.177 Y108.836 E0.05201 ; perimeter
G1 X103.942 Y108.682 E0.01299 ; perimeter
G1 X103.732 Y108.493 E0.01310 ; perimeter
G1 X103.602 Y108.272 E0.01188 ; perimeter
G1 X103.586 Y108.226 E0.00224 ; perimeter
G1 X103.589 Y107.970 E0.01186 ; perimeter
G1 X103.729 Y107.902 E0.00721 ; perimeter
G1 X103.845 Y107.914 E0.00537 ; perimeter
G1 X103.990 Y107.891 E0.00680 ; perimeter
G1 X104.313 Y107.980 E0.01554 ; perimeter
G1 X104.828 Y108.259 E0.02713 ; perimeter
G1 X105.413 Y108.676 E0.03325 ; perimeter
G1 X105.911 Y108.972 E0.02687 ; perimeter
G1 X106.308 Y109.179 E0.02074 ; perimeter
G1 X106.621 Y109.385 E0.01736 ; perimeter
G1 X107.356 Y109.754 E0.03810 ; perimeter
G1 X107.472 Y109.772 E0.00541 ; perimeter
G1 X107.723 Y109.886 E0.01278 ; perimeter
G1 X107.818 Y109.900 E0.00447 ; perimeter
G1 X107.985 Y110.023 E0.00960 ; perimeter
G1 X108.041 Y110.098 E0.00433 ; perimeter
G1 X108.081 Y110.193 E0.00476 ; perimeter
G1 X108.085 Y110.288 E0.00444 ; perimeter
G1 X107.813 Y110.400 F10800.000 ; move inwards before travel
G1 X107.820 Y110.204 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.337664
G1 F2400.000
G1 X107.661 Y110.270 E0.00420 ; infill
G1 X107.404 Y110.162 E0.00683 ; infill
;WIDTH:0.326211
G1 X106.909 Y109.800 E0.01446 ; infill
G1 X107.780 Y110.358 F10800.000 ; move to first infill point
;WIDTH:0.23292
G1 F2400.000
G1 X107.242 Y110.067 E0.00966 ; infill
;WIDTH:0.221662
G1 X106.862 Y109.867 E0.00638 ; infill
;WIDTH:0.204864
G1 X106.469 Y109.656 E0.00601 ; infill
;WIDTH:0.181547
G1 X106.144 Y109.458 E0.00439 ; infill
G1 X105.224 Y108.957 E0.01207 ; infill
;WIDTH:0.279159
G1 X104.615 Y108.600 E0.01388 ; infill
;WIDTH:0.377565
G1 X104.187 Y108.365 E0.01359 ; infill
;WIDTH:0.358909
G1 X104.182 Y108.342 E0.00063 ; infill
;WIDTH:0.321915
G1 X104.189 Y108.326 E0.00039 ; infill
;WIDTH:0.288117
G1 X104.195 Y108.310 E0.00035 ; infill
;WIDTH:0.254319
G1 X104.208 Y108.277 E0.00062 ; infill
;WIDTH:0.217034
G1 X104.221 Y108.244 E0.00051 ; infill
;WIDTH:0.179749
G1 X104.233 Y108.211 E0.00040 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.221 Y108.244 E-0.00938 ; wipe and retract
;WIPE_END
G1 E-2.39062 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X101.987 Y106.563 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.757 Y106.657 E0.01149 ; perimeter
G1 X101.461 Y106.558 E0.01450 ; perimeter
G1 X101.294 Y106.411 E0.01030 ; perimeter
G1 X101.193 Y106.135 E0.01358 ; perimeter
G1 X101.003 Y105.360 E0.03697 ; perimeter
G1 X100.725 Y104.705 E0.03296 ; perimeter
G1 X100.438 Y104.318 E0.02230 ; perimeter
G1 X99.715 Y103.449 E0.05239 ; perimeter
G1 X99.590 Y103.092 E0.01753 ; perimeter
G1 X99.597 Y102.835 E0.01190 ; perimeter
G1 X99.657 Y102.749 E0.00482 ; perimeter
G1 X99.777 Y102.640 E0.00752 ; perimeter
G1 X99.947 Y102.606 E0.00806 ; perimeter
G1 X100.077 Y102.631 E0.00611 ; perimeter
G1 X100.243 Y102.723 E0.00880 ; perimeter
G1 X100.829 Y103.632 E0.05010 ; perimeter
G1 X100.980 Y103.794 E0.01028 ; perimeter
G1 X101.236 Y104.124 E0.01931 ; perimeter
G1 X101.580 Y104.626 E0.02821 ; perimeter
G1 X101.686 Y104.895 E0.01338 ; perimeter
G1 X101.803 Y105.267 E0.01806 ; perimeter
G1 X101.880 Y105.590 E0.01538 ; perimeter
G1 X102.056 Y106.131 E0.02636 ; perimeter
G1 X102.061 Y106.407 E0.01281 ; perimeter
G1 X102.013 Y106.508 E0.00518 ; perimeter
G1 X101.751 Y106.485 F10800.000 ; move inwards before travel
G1 X101.750 Y106.399 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.360816
G1 F2400.000
G1 X101.587 Y106.016 E0.01102 ; infill
G1 X101.382 Y105.247 E0.02102 ; infill
;WIDTH:0.352268
G1 X101.217 Y104.819 E0.01180 ; infill
G1 X101.060 Y104.532 E0.00841 ; infill
;WIDTH:0.312807
G1 X100.735 Y104.090 E0.01231 ; infill
G1 X100.544 Y103.868 E0.00657 ; infill
;WIDTH:0.300252
G1 X100.083 Y103.241 E0.01666 ; infill
G1 X99.957 Y102.980 E0.00620 ; infill
;WIDTH:0.287589
G1 X99.949 Y102.970 E0.00025 ; infill
;WIDTH:0.271703
G1 X99.858 Y102.892 E0.00228 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.949 Y102.970 E-0.03163 ; wipe and retract
;WIPE_END
G1 E-2.36837 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X98.986 Y100.156 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.836 Y100.128 E0.00706 ; perimeter
G1 X98.667 Y100.029 E0.00905 ; perimeter
G1 X98.615 Y99.912 E0.00595 ; perimeter
G1 X98.589 Y99.664 E0.01152 ; perimeter
G1 X98.598 Y99.589 E0.00352 ; perimeter
G1 X98.680 Y99.436 E0.00804 ; perimeter
G1 X98.904 Y99.288 E0.01242 ; perimeter
G1 X99.066 Y99.307 E0.00758 ; perimeter
G1 X99.147 Y99.291 E0.00382 ; perimeter
G1 X99.205 Y99.334 E0.00333 ; perimeter
G1 X99.341 Y99.527 E0.01093 ; perimeter
G1 X99.390 Y99.751 E0.01063 ; perimeter
G1 X99.374 Y99.854 E0.00483 ; perimeter
G1 X99.245 Y100.030 E0.01007 ; perimeter
G1 X99.039 Y100.127 E0.01059 ; perimeter
G1 X98.897 Y100.032 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X98.836 Y100.128 E-0.05342 ; wipe and retract
G1 X98.667 Y100.029 E-0.05158 ; wipe and retract
G1 X98.615 Y99.912 E-0.03388 ; wipe and retract
G1 X98.589 Y99.664 E-0.06562 ; wipe and retract
G1 X98.598 Y99.589 E-0.02005 ; wipe and retract
G1 X98.680 Y99.436 E-0.04581 ; wipe and retract
G1 X98.904 Y99.288 E-0.07077 ; wipe and retract
G1 X99.066 Y99.307 E-0.04317 ; wipe and retract
G1 X99.147 Y99.291 E-0.02175 ; wipe and retract
G1 X99.205 Y99.334 E-0.01896 ; wipe and retract
G1 X99.341 Y99.527 E-0.06227 ; wipe and retract
G1 X99.390 Y99.751 E-0.06055 ; wipe and retract
G1 X99.374 Y99.854 E-0.02753 ; wipe and retract
G1 X99.245 Y100.030 E-0.05740 ; wipe and retract
G1 X99.039 Y100.127 E-0.06034 ; wipe and retract
;WIPE_END
G1 E-1.70689 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X99.292 Y97.435 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.169 Y97.337 E0.00727 ; perimeter
G1 X99.087 Y97.146 E0.00966 ; perimeter
G1 X99.084 Y96.949 E0.00914 ; perimeter
G1 X99.188 Y96.667 E0.01393 ; perimeter
G1 X99.360 Y96.467 E0.01216 ; perimeter
G1 X99.703 Y96.238 E0.01913 ; perimeter
G1 X99.887 Y96.187 E0.00883 ; perimeter
G1 X100.501 Y95.616 E0.03885 ; perimeter
G1 X100.562 Y95.443 E0.00851 ; perimeter
G1 X100.708 Y95.252 E0.01112 ; perimeter
G1 X101.127 Y94.842 E0.02713 ; perimeter
G1 X101.492 Y94.625 E0.01972 ; perimeter
G1 X101.791 Y94.482 E0.01535 ; perimeter
G1 X101.995 Y94.456 E0.00951 ; perimeter
G1 X102.246 Y94.486 E0.01168 ; perimeter
G1 X102.403 Y94.569 E0.00825 ; perimeter
G1 X102.441 Y94.638 E0.00362 ; perimeter
G1 X102.458 Y94.758 E0.00563 ; perimeter
G1 X102.425 Y94.992 E0.01094 ; perimeter
G1 X102.364 Y95.091 E0.00540 ; perimeter
G1 X102.042 Y95.293 E0.01760 ; perimeter
G1 X101.669 Y95.455 E0.01884 ; perimeter
G1 X101.311 Y95.654 E0.01895 ; perimeter
G1 X100.601 Y95.977 E0.03614 ; perimeter
G1 X100.557 Y96.070 E0.00478 ; perimeter
G1 X100.348 Y96.271 E0.01340 ; perimeter
G1 X100.176 Y96.562 E0.01566 ; perimeter
G1 X100.132 Y96.701 E0.00677 ; perimeter
G1 X99.883 Y97.176 E0.02484 ; perimeter
G1 X99.736 Y97.339 E0.01013 ; perimeter
G1 X99.668 Y97.384 E0.00379 ; perimeter
G1 X99.428 Y97.449 E0.01155 ; perimeter
G1 X99.352 Y97.441 E0.00352 ; perimeter
G1 X99.273 Y97.279 F10800.000 ; move inwards before travel
G1 X99.362 Y97.174 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.236927
G1 F2400.000
G1 X99.925 Y96.427 E0.01508 ; infill
G1 X99.858 Y96.445 F10800.000 ; move to first infill point
;WIDTH:0.396359
G1 F2400.000
G1 X99.524 Y96.949 E0.01775 ; infill
;WIDTH:0.388049
G1 X99.490 Y97.010 E0.00201 ; infill
;WIDTH:0.366319
G1 X99.345 Y97.136 E0.00517 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.490 Y97.010 E-0.05070 ; wipe and retract
;WIPE_END
G1 E-2.34930 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X100.765 Y95.591 ; move to first infill point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.24564
G1 F2400.000
G1 X100.957 Y95.460 E0.00391 ; infill
;WIDTH:0.287095
G1 X101.148 Y95.329 E0.00471 ; infill
;WIDTH:0.324434
G1 X101.260 Y95.246 E0.00328 ; infill
;WIDTH:0.367032
G1 X101.498 Y95.090 E0.00765 ; infill
;WIDTH:0.396068
G1 X101.992 Y94.861 E0.01601 ; infill
;WIDTH:0.281035
G1 X101.992 Y94.699 E0.00320 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.992 Y94.861 E-0.04259 ; wipe and retract
;WIPE_END
G1 E-2.35741 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X104.635 Y94.510 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.652 Y94.281 E0.01064 ; perimeter
G1 X104.733 Y94.158 E0.00685 ; perimeter
G1 X104.910 Y94.062 E0.00933 ; perimeter
G1 X105.075 Y94.049 E0.00769 ; perimeter
G1 X105.284 Y94.117 E0.01019 ; perimeter
G1 X105.346 Y94.167 E0.00365 ; perimeter
G1 X105.489 Y94.408 E0.01301 ; perimeter
G1 X105.480 Y94.494 E0.00398 ; perimeter
G1 X105.327 Y94.750 E0.01382 ; perimeter
G1 X105.187 Y94.835 E0.00755 ; perimeter
G1 X105.044 Y94.851 E0.00670 ; perimeter
G1 X104.910 Y94.822 E0.00635 ; perimeter
G1 X104.803 Y94.767 E0.00557 ; perimeter
G1 X104.688 Y94.658 E0.00734 ; perimeter
G1 X104.655 Y94.567 E0.00448 ; perimeter
G1 X104.815 Y94.369 F10800.000 ; move inwards before travel
G1 X105.050 Y94.456 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.336976
G1 F2400.000
G1 X105.026 Y94.447 E0.00063 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.050 Y94.456 E-0.00681 ; wipe and retract
;WIPE_END
G1 E-2.39319 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X107.280 Y95.529 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.371 Y95.378 E0.00818 ; perimeter
G1 X107.511 Y95.272 E0.00811 ; perimeter
G1 X107.640 Y95.223 E0.00641 ; perimeter
G1 X107.910 Y95.205 E0.01254 ; perimeter
G1 X108.185 Y95.253 E0.01291 ; perimeter
G1 X108.474 Y95.411 E0.01527 ; perimeter
G1 X108.517 Y95.477 E0.00367 ; perimeter
G1 X108.607 Y95.558 E0.00558 ; perimeter
G1 X108.662 Y95.747 E0.00914 ; perimeter
G1 X108.660 Y95.855 E0.00499 ; perimeter
G1 X108.511 Y95.965 E0.00858 ; perimeter
G1 X108.220 Y96.048 E0.01401 ; perimeter
G1 X107.768 Y96.000 E0.02106 ; perimeter
G1 X107.568 Y95.911 E0.01015 ; perimeter
G1 X107.419 Y95.793 E0.00879 ; perimeter
G1 X107.299 Y95.669 E0.00800 ; perimeter
G1 X107.286 Y95.588 E0.00378 ; perimeter
G1 X107.448 Y95.473 F10800.000 ; move inwards before travel
G1 X107.535 Y95.567 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.19955
G1 F2400.000
G1 X107.605 Y95.567 E0.00091 ; infill
;WIDTH:0.231555
G1 X107.675 Y95.568 E0.00110 ; infill
;WIDTH:0.273769
G1 X107.717 Y95.575 E0.00082 ; infill
;WIDTH:0.308231
G1 X108.328 Y95.766 E0.01412 ; infill
G1 X107.568 Y95.600 F10800.000 ; move to first infill point
;WIDTH:0.356795
G1 F2400.000
G1 X107.888 Y95.610 E0.00837 ; infill
G1 X108.069 Y95.637 E0.00478 ; infill
G1 X108.405 Y95.729 E0.00909 ; infill
G1 X108.407 Y95.735 F10800.000 ; move to first infill point
;WIDTH:0.235754
G1 F2400.000
G1 X108.221 Y95.676 E0.00312 ; infill
G1 X107.563 Y95.595 E0.01064 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.221 Y95.676 E-0.17514 ; wipe and retract
G1 X108.407 Y95.735 E-0.05139 ; wipe and retract
;WIPE_END
G1 E-2.17348 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X109.652 Y96.278 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.793 Y96.114 E0.01000 ; perimeter
G1 X110.048 Y96.060 E0.01206 ; perimeter
G1 X110.392 Y96.124 E0.01625 ; perimeter
G1 X110.686 Y96.256 E0.01491 ; perimeter
G1 X111.090 Y96.529 E0.02259 ; perimeter
G1 X111.186 Y96.623 E0.00620 ; perimeter
G1 X111.317 Y96.682 E0.00667 ; perimeter
G1 X111.664 Y96.927 E0.01967 ; perimeter
G1 X111.865 Y97.195 E0.01552 ; perimeter
G1 X111.900 Y97.355 E0.00759 ; perimeter
G1 X111.856 Y97.642 E0.01343 ; perimeter
G1 X111.719 Y97.801 E0.00971 ; perimeter
G1 X111.617 Y97.835 E0.00501 ; perimeter
G1 X111.498 Y97.834 E0.00551 ; perimeter
G1 X111.272 Y97.722 E0.01168 ; perimeter
G1 X111.086 Y97.508 E0.01310 ; perimeter
G1 X110.674 Y97.169 E0.02475 ; perimeter
G1 X109.996 Y96.946 E0.03305 ; perimeter
G1 X109.860 Y96.824 E0.00845 ; perimeter
G1 X109.734 Y96.637 E0.01043 ; perimeter
G1 X109.693 Y96.537 E0.00499 ; perimeter
G1 X109.705 Y96.479 E0.00275 ; perimeter
G1 X109.668 Y96.336 E0.00686 ; perimeter
G1 X109.867 Y96.256 F10800.000 ; move inwards before travel
G1 X109.950 Y96.485 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.470766
G1 F2400.000
G1 X110.255 Y96.561 E0.01119 ; infill
G1 X110.470 Y96.643 E0.00817 ; infill
;WIDTH:0.442835
G1 X110.591 Y96.701 E0.00446 ; infill
;WIDTH:0.403948
G1 X110.712 Y96.759 E0.00403 ; infill
;WIDTH:0.365061
G1 X110.833 Y96.817 E0.00360 ; infill
;WIDTH:0.326175
G1 X110.877 Y96.848 E0.00126 ; infill
;WIDTH:0.314436
G1 X111.380 Y97.226 E0.01420 ; infill
G1 X111.499 Y97.386 E0.00452 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.380 Y97.226 E-0.05279 ; wipe and retract
G1 X110.877 Y96.848 E-0.16603 ; wipe and retract
;WIPE_END
G1 E-2.18118 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X113.943 Y100.811 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.832 Y100.911 E0.00692 ; perimeter
G1 X113.547 Y100.913 E0.01321 ; perimeter
G1 X113.380 Y100.889 E0.00778 ; perimeter
G1 X113.194 Y100.737 E0.01114 ; perimeter
G1 X113.028 Y100.482 E0.01408 ; perimeter
G1 X112.975 Y100.319 E0.00795 ; perimeter
G1 X113.010 Y100.164 E0.00735 ; perimeter
G1 X112.972 Y100.020 E0.00689 ; perimeter
G1 X112.985 Y99.919 E0.00472 ; perimeter
G1 X113.071 Y99.716 E0.01021 ; perimeter
G1 X113.138 Y99.662 E0.00399 ; perimeter
G1 X113.388 Y99.712 E0.01183 ; perimeter
G1 X113.526 Y99.786 E0.00727 ; perimeter
G1 X113.677 Y99.935 E0.00981 ; perimeter
G1 X113.874 Y100.209 E0.01561 ; perimeter
G1 X114.003 Y100.442 E0.01235 ; perimeter
G1 X114.014 Y100.545 E0.00479 ; perimeter
G1 X113.997 Y100.723 E0.00829 ; perimeter
G1 X113.975 Y100.760 E0.00202 ; perimeter
G1 X113.795 Y100.793 F10800.000 ; move inwards before travel
G1 X113.535 Y100.668 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.182728
G1 F2400.000
G1 X113.261 Y99.932 E0.00913 ; infill
G1 X113.283 Y99.936 F10800.000 ; move to first infill point
;WIDTH:0.311974
G1 F2400.000
G1 X113.391 Y100.180 E0.00596 ; infill
;WIDTH:0.319131
G1 X113.498 Y100.663 E0.01135 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.391 Y100.180 E-0.13045 ; wipe and retract
;WIPE_END
G1 E-2.26955 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 X115.843 Y105.371 ; move to first perimeter point
G1 Z17.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.713 Y105.478 E0.00782 ; perimeter
G1 X115.462 Y105.518 E0.01180 ; perimeter
G1 X115.283 Y105.484 E0.00843 ; perimeter
G1 X115.201 Y105.406 E0.00525 ; perimeter
G1 X115.127 Y105.243 E0.00826 ; perimeter
G1 X115.043 Y104.876 E0.01748 ; perimeter
G1 X114.989 Y104.379 E0.02315 ; perimeter
G1 X115.045 Y104.214 E0.00805 ; perimeter
G1 X115.046 Y104.112 E0.00472 ; perimeter
G1 X115.113 Y104.012 E0.00558 ; perimeter
G1 X115.155 Y103.855 E0.00756 ; perimeter
G1 X115.289 Y103.829 E0.00629 ; perimeter
G1 X115.378 Y103.870 E0.00453 ; perimeter
G1 X115.530 Y104.025 E0.01007 ; perimeter
G1 X115.792 Y104.514 E0.02568 ; perimeter
G1 X115.869 Y104.874 E0.01703 ; perimeter
G1 X115.890 Y105.221 E0.01613 ; perimeter
G1 X115.861 Y105.313 E0.00446 ; perimeter
G1 X115.675 Y105.357 F10800.000 ; move inwards before travel
G1 X115.284 Y104.261 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.335216
G1 F2400.000
G1 X115.413 Y104.653 E0.01003 ; infill
G1 X115.532 Y105.263 E0.01511 ; infill
;LAYER_CHANGE
;Z:17.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;17.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.413 Y104.653 E-0.16401 ; wipe and retract
G1 X115.284 Y104.261 E-0.10891 ; wipe and retract
;WIPE_END
G1 E-2.12708 F2400.000 ; retract
G1 Z17.675 F10800.000 ; lift Z
G1 Z17.800 ; move to next layer (88)
;AFTER_LAYER_CHANGE
;17.8
G1 Z17.875 ; lift Z
G1 X115.537 Y111.480 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.685 Y111.529 E0.00725 ; perimeter
G1 X115.807 Y111.625 E0.00717 ; perimeter
G1 X115.868 Y111.724 E0.00538 ; perimeter
G1 X115.890 Y111.804 E0.00384 ; perimeter
G1 X115.890 Y112.014 E0.00975 ; perimeter
G1 X115.813 Y112.186 E0.00873 ; perimeter
G1 X115.723 Y112.269 E0.00567 ; perimeter
G1 X115.578 Y112.321 E0.00713 ; perimeter
G1 X115.369 Y112.297 E0.00977 ; perimeter
G1 X115.293 Y112.258 E0.00395 ; perimeter
G1 X115.169 Y112.093 E0.00953 ; perimeter
G1 X115.142 Y112.004 E0.00433 ; perimeter
G1 X115.133 Y111.858 E0.00675 ; perimeter
G1 X115.170 Y111.710 E0.00708 ; perimeter
G1 X115.256 Y111.573 E0.00750 ; perimeter
G1 X115.385 Y111.500 E0.00688 ; perimeter
G1 X115.477 Y111.487 E0.00431 ; perimeter
G1 X115.600 Y111.623 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.685 Y111.529 E-0.05595 ; wipe and retract
G1 X115.807 Y111.625 E-0.04084 ; wipe and retract
G1 X115.868 Y111.724 E-0.03067 ; wipe and retract
G1 X115.890 Y111.804 E-0.02190 ; wipe and retract
G1 X115.890 Y112.014 E-0.05556 ; wipe and retract
G1 X115.813 Y112.186 E-0.04976 ; wipe and retract
G1 X115.723 Y112.269 E-0.03233 ; wipe and retract
G1 X115.578 Y112.321 E-0.04059 ; wipe and retract
G1 X115.369 Y112.297 E-0.05564 ; wipe and retract
G1 X115.293 Y112.258 E-0.02253 ; wipe and retract
G1 X115.169 Y112.093 E-0.05430 ; wipe and retract
G1 X115.142 Y112.004 E-0.02469 ; wipe and retract
G1 X115.133 Y111.858 E-0.03847 ; wipe and retract
G1 X115.170 Y111.710 E-0.04031 ; wipe and retract
G1 X115.256 Y111.573 E-0.04274 ; wipe and retract
G1 X115.385 Y111.500 E-0.03918 ; wipe and retract
G1 X115.477 Y111.487 E-0.02453 ; wipe and retract
;WIPE_END
G1 E-1.73000 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X115.482 Y114.469 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.661 Y114.524 E0.00868 ; perimeter
G1 X115.784 Y114.649 E0.00810 ; perimeter
G1 X115.832 Y114.782 E0.00655 ; perimeter
G1 X115.833 Y114.941 E0.00738 ; perimeter
G1 X115.799 Y115.065 E0.00597 ; perimeter
G1 X115.748 Y115.156 E0.00480 ; perimeter
G1 X115.175 Y115.825 E0.04084 ; perimeter
G1 X115.077 Y115.901 E0.00575 ; perimeter
G1 X114.941 Y115.954 E0.00675 ; perimeter
G1 X114.789 Y115.959 E0.00704 ; perimeter
G1 X114.660 Y115.930 E0.00615 ; perimeter
G1 X114.475 Y115.826 E0.00982 ; perimeter
G1 X114.404 Y115.657 E0.00851 ; perimeter
G1 X114.420 Y115.452 E0.00952 ; perimeter
G1 X114.516 Y115.303 E0.00821 ; perimeter
G1 X115.132 Y114.613 E0.04281 ; perimeter
G1 X115.256 Y114.510 E0.00752 ; perimeter
G1 X115.423 Y114.479 E0.00785 ; perimeter
G1 X115.564 Y114.637 F10800.000 ; move inwards before travel
G1 X115.503 Y114.720 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.286976
G1 F2400.000
G1 X115.467 Y114.840 E0.00254 ; infill
G1 X115.430 Y114.888 E0.00122 ; infill
;WIDTH:0.379986
G1 X114.884 Y115.520 E0.02342 ; infill
G1 X114.830 Y115.558 E0.00184 ; infill
G1 X113.553 Y115.680 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.529 Y115.828 E0.00698 ; perimeter
G1 X113.387 Y116.048 E0.01214 ; perimeter
G1 X113.264 Y116.126 E0.00676 ; perimeter
G1 X113.160 Y116.151 E0.00494 ; perimeter
G1 X112.989 Y116.155 E0.00791 ; perimeter
G1 X112.769 Y116.105 E0.01044 ; perimeter
G1 X112.645 Y116.006 E0.00734 ; perimeter
G1 X112.581 Y115.857 E0.00751 ; perimeter
G1 X112.585 Y115.645 E0.00985 ; perimeter
G1 X112.649 Y115.504 E0.00717 ; perimeter
G1 X112.701 Y115.459 E0.00320 ; perimeter
G1 X112.886 Y115.380 E0.00929 ; perimeter
G1 X113.025 Y115.359 E0.00652 ; perimeter
G1 X113.263 Y115.396 E0.01115 ; perimeter
G1 X113.454 Y115.516 E0.01047 ; perimeter
G1 X113.522 Y115.628 E0.00608 ; perimeter
G1 X113.436 Y115.775 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.529 Y115.828 E-0.05285 ; wipe and retract
G1 X113.387 Y116.048 E-0.06915 ; wipe and retract
G1 X113.264 Y116.126 E-0.03852 ; wipe and retract
G1 X113.160 Y116.151 E-0.02817 ; wipe and retract
G1 X112.989 Y116.155 E-0.04508 ; wipe and retract
G1 X112.769 Y116.105 E-0.05950 ; wipe and retract
G1 X112.645 Y116.006 E-0.04184 ; wipe and retract
G1 X112.581 Y115.857 E-0.04277 ; wipe and retract
G1 X112.585 Y115.645 E-0.05612 ; wipe and retract
G1 X112.649 Y115.504 E-0.04083 ; wipe and retract
G1 X112.701 Y115.459 E-0.01823 ; wipe and retract
G1 X112.886 Y115.380 E-0.05294 ; wipe and retract
G1 X113.025 Y115.359 E-0.03712 ; wipe and retract
G1 X113.263 Y115.396 E-0.06353 ; wipe and retract
G1 X113.454 Y115.516 E-0.05966 ; wipe and retract
G1 X113.522 Y115.628 E-0.03462 ; wipe and retract
;WIPE_END
G1 E-1.65909 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X110.770 Y113.323 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.700 Y113.395 E0.00463 ; perimeter
G1 X110.516 Y113.451 E0.00892 ; perimeter
G1 X110.218 Y113.406 E0.01397 ; perimeter
G1 X110.061 Y113.310 E0.00850 ; perimeter
G1 X109.933 Y113.158 E0.00922 ; perimeter
G1 X109.868 Y112.988 E0.00844 ; perimeter
G1 X109.861 Y112.877 E0.00517 ; perimeter
G1 X109.890 Y112.762 E0.00547 ; perimeter
G1 X109.985 Y112.648 E0.00688 ; perimeter
G1 X110.147 Y112.584 E0.00805 ; perimeter
G1 X110.414 Y112.617 E0.01248 ; perimeter
G1 X110.651 Y112.749 E0.01256 ; perimeter
G1 X110.803 Y112.984 E0.01298 ; perimeter
G1 X110.825 Y113.077 E0.00443 ; perimeter
G1 X110.816 Y113.199 E0.00568 ; perimeter
G1 X110.791 Y113.267 E0.00333 ; perimeter
G1 X110.670 Y113.317 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.700 Y113.395 E-0.04133 ; wipe and retract
G1 X110.516 Y113.451 E-0.05084 ; wipe and retract
G1 X110.218 Y113.406 E-0.07959 ; wipe and retract
G1 X110.061 Y113.310 E-0.04844 ; wipe and retract
G1 X109.933 Y113.158 E-0.05250 ; wipe and retract
G1 X109.868 Y112.988 E-0.04809 ; wipe and retract
G1 X109.861 Y112.877 E-0.02947 ; wipe and retract
G1 X109.890 Y112.762 E-0.03117 ; wipe and retract
G1 X109.985 Y112.648 E-0.03917 ; wipe and retract
G1 X110.147 Y112.584 E-0.04584 ; wipe and retract
G1 X110.414 Y112.617 E-0.07112 ; wipe and retract
G1 X110.651 Y112.749 E-0.07158 ; wipe and retract
G1 X110.803 Y112.984 E-0.07394 ; wipe and retract
G1 X110.825 Y113.077 E-0.02525 ; wipe and retract
G1 X110.816 Y113.199 E-0.03233 ; wipe and retract
G1 X110.791 Y113.267 E-0.01900 ; wipe and retract
;WIPE_END
G1 E-1.64033 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X107.842 Y110.654 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.767 Y110.698 E0.00403 ; perimeter
G1 X107.676 Y110.699 E0.00420 ; perimeter
G1 X107.460 Y110.648 E0.01027 ; perimeter
G1 X105.019 Y109.280 E0.12964 ; perimeter
G1 X104.295 Y108.918 E0.03749 ; perimeter
G1 X103.972 Y108.711 E0.01779 ; perimeter
G1 X103.790 Y108.529 E0.01191 ; perimeter
G1 X103.724 Y108.332 E0.00963 ; perimeter
G1 X103.749 Y108.158 E0.00815 ; perimeter
G1 X103.884 Y108.056 E0.00785 ; perimeter
G1 X104.174 Y107.994 E0.01373 ; perimeter
G1 X104.411 Y108.044 E0.01120 ; perimeter
G1 X105.146 Y108.446 E0.03879 ; perimeter
G1 X105.428 Y108.635 E0.01573 ; perimeter
G1 X106.273 Y109.112 E0.04495 ; perimeter
G1 X107.308 Y109.663 E0.05433 ; perimeter
G1 X107.766 Y109.883 E0.02351 ; perimeter
G1 X108.011 Y110.080 E0.01458 ; perimeter
G1 X108.087 Y110.259 E0.00901 ; perimeter
G1 X108.090 Y110.381 E0.00565 ; perimeter
G1 X108.016 Y110.570 E0.00940 ; perimeter
G1 X107.992 Y110.603 E0.00190 ; perimeter
G1 X107.899 Y110.634 E0.00456 ; perimeter
G1 X107.767 Y110.608 F10800.000 ; move inwards before travel
G1 X107.812 Y110.409 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.375899
G1 F2400.000
G1 X107.547 Y110.230 E0.00887 ; infill
G1 X107.134 Y110.015 E0.01289 ; infill
;WIDTH:0.346283
G1 X106.092 Y109.446 E0.02995 ; infill
;WIDTH:0.32012
G1 X104.014 Y108.275 E0.05498 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.092 Y109.446 E-0.62942 ; wipe and retract
;WIPE_END
G1 E-1.77058 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X101.387 Y106.443 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.263 Y106.323 E0.00799 ; perimeter
G1 X101.171 Y106.079 E0.01208 ; perimeter
G1 X101.066 Y105.652 E0.02040 ; perimeter
G1 X100.948 Y105.033 E0.02920 ; perimeter
G1 X100.747 Y104.556 E0.02394 ; perimeter
G1 X100.154 Y103.945 E0.03947 ; perimeter
G1 X99.746 Y103.470 E0.02902 ; perimeter
G1 X99.588 Y103.038 E0.02128 ; perimeter
G1 X99.604 Y102.736 E0.01400 ; perimeter
G1 X99.681 Y102.586 E0.00782 ; perimeter
G1 X99.785 Y102.507 E0.00606 ; perimeter
G1 X99.887 Y102.475 E0.00493 ; perimeter
G1 X99.917 Y102.494 E0.00167 ; perimeter
G1 X100.084 Y102.509 E0.00775 ; perimeter
G1 X100.267 Y102.687 E0.01185 ; perimeter
G1 X100.392 Y102.865 E0.01009 ; perimeter
G1 X100.454 Y103.143 E0.01319 ; perimeter
G1 X100.748 Y103.552 E0.02333 ; perimeter
G1 X100.877 Y103.784 E0.01231 ; perimeter
G1 X101.511 Y104.633 E0.04908 ; perimeter
G1 X101.724 Y105.034 E0.02102 ; perimeter
G1 X101.910 Y105.589 E0.02713 ; perimeter
G1 X102.021 Y106.022 E0.02072 ; perimeter
G1 X102.023 Y106.335 E0.01448 ; perimeter
G1 X101.791 Y106.508 E0.01338 ; perimeter
G1 X101.644 Y106.529 E0.00688 ; perimeter
G1 X101.444 Y106.462 E0.00980 ; perimeter
G1 X101.394 Y106.271 F10800.000 ; move inwards before travel
G1 X101.612 Y106.085 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.397837
G1 F2400.000
G1 X101.468 Y105.564 E0.01597 ; infill
;WIDTH:0.38363
G1 X101.418 Y105.375 E0.00553 ; infill
;WIDTH:0.357498
G1 X101.369 Y105.186 E0.00511 ; infill
;WIDTH:0.331364
G1 X101.326 Y105.065 E0.00310 ; infill
;WIDTH:0.292643
G1 X101.283 Y104.943 E0.00268 ; infill
;WIDTH:0.253924
G1 X101.224 Y104.815 E0.00247 ; infill
;WIDTH:0.238745
G1 X101.146 Y104.679 E0.00256 ; infill
;WIDTH:0.200467
G1 X101.067 Y104.542 E0.00206 ; infill
;WIDTH:0.162189
G1 X100.989 Y104.405 E0.00156 ; infill
;WIDTH:0.12391
G1 X100.606 Y103.953 E0.00399 ; infill
;WIDTH:0.232847
G1 X100.118 Y103.324 E0.01258 ; infill
;WIDTH:0.332965
G1 X99.990 Y102.983 E0.00877 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.118 Y103.324 E-0.09598 ; wipe and retract
;WIPE_END
G1 E-2.30402 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X99.053 Y100.178 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.031 Y100.193 E0.00125 ; perimeter
G1 X98.815 Y100.120 E0.01056 ; perimeter
G1 X98.685 Y100.042 E0.00702 ; perimeter
G1 X98.644 Y99.959 E0.00430 ; perimeter
G1 X98.603 Y99.697 E0.01226 ; perimeter
G1 X98.623 Y99.549 E0.00693 ; perimeter
G1 X98.719 Y99.390 E0.00863 ; perimeter
G1 X99.022 Y99.257 E0.01530 ; perimeter
G1 X99.118 Y99.238 E0.00457 ; perimeter
G1 X99.248 Y99.274 E0.00624 ; perimeter
G1 X99.352 Y99.440 E0.00910 ; perimeter
G1 X99.391 Y99.540 E0.00494 ; perimeter
G1 X99.415 Y99.763 E0.01040 ; perimeter
G1 X99.391 Y99.945 E0.00849 ; perimeter
G1 X99.342 Y100.018 E0.00408 ; perimeter
G1 X99.240 Y100.111 E0.00641 ; perimeter
G1 X99.110 Y100.158 E0.00639 ; perimeter
G1 X99.029 Y100.166 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.031 Y100.193 E-0.02279 ; wipe and retract
G1 X98.815 Y100.120 E-0.06016 ; wipe and retract
G1 X98.685 Y100.042 E-0.03998 ; wipe and retract
G1 X98.644 Y99.959 E-0.02449 ; wipe and retract
G1 X98.603 Y99.697 E-0.06984 ; wipe and retract
G1 X98.623 Y99.549 E-0.03946 ; wipe and retract
G1 X98.719 Y99.390 E-0.04919 ; wipe and retract
G1 X99.022 Y99.257 E-0.08717 ; wipe and retract
G1 X99.118 Y99.238 E-0.02601 ; wipe and retract
G1 X99.248 Y99.274 E-0.03552 ; wipe and retract
G1 X99.352 Y99.440 E-0.05184 ; wipe and retract
G1 X99.391 Y99.540 E-0.02815 ; wipe and retract
G1 X99.415 Y99.763 E-0.05926 ; wipe and retract
G1 X99.391 Y99.945 E-0.04834 ; wipe and retract
G1 X99.342 Y100.018 E-0.02326 ; wipe and retract
G1 X99.240 Y100.111 E-0.03652 ; wipe and retract
G1 X99.110 Y100.158 E-0.03641 ; wipe and retract
;WIPE_END
G1 E-1.66161 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X99.315 Y97.350 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.241 Y97.304 E0.00403 ; perimeter
G1 X99.200 Y97.238 E0.00357 ; perimeter
G1 X99.162 Y97.093 E0.00696 ; perimeter
G1 X99.154 Y96.853 E0.01115 ; perimeter
G1 X99.276 Y96.555 E0.01490 ; perimeter
G1 X99.580 Y96.212 E0.02123 ; perimeter
G1 X99.938 Y95.957 E0.02036 ; perimeter
G1 X100.339 Y95.551 E0.02645 ; perimeter
G1 X100.501 Y95.359 E0.01160 ; perimeter
G1 X100.872 Y95.020 E0.02330 ; perimeter
G1 X101.898 Y94.467 E0.05397 ; perimeter
G1 X102.141 Y94.424 E0.01145 ; perimeter
G1 X102.390 Y94.459 E0.01165 ; perimeter
G1 X102.543 Y94.539 E0.00799 ; perimeter
G1 X102.590 Y94.810 E0.01273 ; perimeter
G1 X102.565 Y94.942 E0.00624 ; perimeter
G1 X102.494 Y95.054 E0.00613 ; perimeter
G1 X102.280 Y95.210 E0.01226 ; perimeter
G1 X101.671 Y95.471 E0.03072 ; perimeter
G1 X101.294 Y95.700 E0.02044 ; perimeter
G1 X100.988 Y95.847 E0.01570 ; perimeter
G1 X100.602 Y96.192 E0.02397 ; perimeter
G1 X100.251 Y96.588 E0.02455 ; perimeter
G1 X99.949 Y97.124 E0.02850 ; perimeter
G1 X99.811 Y97.301 E0.01036 ; perimeter
G1 X99.652 Y97.392 E0.00849 ; perimeter
G1 X99.451 Y97.423 E0.00942 ; perimeter
G1 X99.353 Y97.396 E0.00469 ; perimeter
G1 X99.305 Y97.263 F10800.000 ; move inwards before travel
G1 X99.446 Y97.148 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.384325
G1 F2400.000
G1 X99.646 Y96.786 E0.01175 ; infill
G1 X100.131 Y96.105 E0.02372 ; infill
G1 X99.398 Y96.942 F10800.000 ; move to first infill point
;WIDTH:0.197751
G1 F2400.000
G1 X100.379 Y95.963 E0.01784 ; infill
;WIDTH:0.215859
G1 X100.584 Y95.769 E0.00406 ; infill
;WIDTH:0.254641
G1 X100.807 Y95.549 E0.00552 ; infill
;WIDTH:0.28926
G1 X100.906 Y95.482 E0.00244 ; infill
;WIDTH:0.323881
G1 X101.005 Y95.416 E0.00278 ; infill
;WIDTH:0.336747
G1 X101.502 Y95.121 E0.01413 ; infill
;WIDTH:0.363412
G1 X101.769 Y94.992 E0.00790 ; infill
;WIDTH:0.390077
G1 X102.036 Y94.864 E0.00855 ; infill
G1 X102.341 Y94.772 E0.00920 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.036 Y94.864 E-0.08407 ; wipe and retract
G1 X101.769 Y94.992 E-0.07819 ; wipe and retract
;WIPE_END
G1 E-2.23774 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X104.616 Y94.502 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.629 Y94.259 E0.01130 ; perimeter
G1 X104.698 Y94.142 E0.00630 ; perimeter
G1 X104.930 Y94.044 E0.01164 ; perimeter
G1 X105.115 Y94.046 E0.00857 ; perimeter
G1 X105.157 Y94.082 E0.00257 ; perimeter
G1 X105.291 Y94.119 E0.00644 ; perimeter
G1 X105.419 Y94.289 E0.00988 ; perimeter
G1 X105.450 Y94.377 E0.00431 ; perimeter
G1 X105.438 Y94.506 E0.00602 ; perimeter
G1 X105.315 Y94.738 E0.01213 ; perimeter
G1 X105.184 Y94.804 E0.00679 ; perimeter
G1 X104.999 Y94.828 E0.00865 ; perimeter
G1 X104.884 Y94.808 E0.00542 ; perimeter
G1 X104.691 Y94.680 E0.01070 ; perimeter
G1 X104.639 Y94.557 E0.00615 ; perimeter
G1 X104.798 Y94.340 F10800.000 ; move inwards before travel
G1 X105.013 Y94.440 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.326593
G1 F2400.000
G1 X105.006 Y94.437 E0.00018 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.013 Y94.440 E-0.00204 ; wipe and retract
;WIPE_END
G1 E-2.39796 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X111.867 Y97.167 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.884 Y97.266 E0.00466 ; perimeter
G1 X111.842 Y97.532 E0.01247 ; perimeter
G1 X111.778 Y97.666 E0.00688 ; perimeter
G1 X111.729 Y97.723 E0.00349 ; perimeter
G1 X111.621 Y97.758 E0.00527 ; perimeter
G1 X111.466 Y97.740 E0.00719 ; perimeter
G1 X111.252 Y97.664 E0.01056 ; perimeter
G1 X110.856 Y97.288 E0.02529 ; perimeter
G1 X110.564 Y97.084 E0.01649 ; perimeter
G1 X110.183 Y96.965 E0.01845 ; perimeter
G1 X110.000 Y96.874 E0.00949 ; perimeter
G1 X109.724 Y96.623 E0.01728 ; perimeter
G1 X109.676 Y96.511 E0.00564 ; perimeter
G1 X109.454 Y96.329 E0.01329 ; perimeter
G1 X109.376 Y96.037 E0.01403 ; perimeter
G1 X109.200 Y96.029 E0.00815 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.156 Y96.027 E0.00183 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.100 Y96.025 E0.00259 ; perimeter
G1 X109.157 Y96.005 E0.00278 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.236 Y95.979 E0.00349 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.391 Y95.926 E0.00755 ; perimeter
G1 X109.566 Y95.976 E0.00842 ; perimeter
G1 X109.839 Y95.920 E0.01295 ; perimeter
G1 X110.382 Y96.052 E0.02586 ; perimeter
G1 X110.561 Y96.140 E0.00923 ; perimeter
G1 X111.269 Y96.576 E0.03851 ; perimeter
G1 X111.667 Y96.882 E0.02329 ; perimeter
G1 X111.832 Y97.118 E0.01332 ; perimeter
G1 X111.804 Y97.246 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.884 Y97.266 E-0.04146 ; wipe and retract
G1 X111.842 Y97.532 E-0.07102 ; wipe and retract
G1 X111.778 Y97.666 E-0.03921 ; wipe and retract
G1 X111.729 Y97.723 E-0.01988 ; wipe and retract
G1 X111.621 Y97.758 E-0.03004 ; wipe and retract
G1 X111.466 Y97.740 E-0.04095 ; wipe and retract
G1 X111.252 Y97.664 E-0.06016 ; wipe and retract
G1 X110.856 Y97.288 E-0.14406 ; wipe and retract
G1 X110.564 Y97.084 E-0.09395 ; wipe and retract
G1 X110.183 Y96.965 E-0.10512 ; wipe and retract
G1 X110.000 Y96.874 E-0.05404 ; wipe and retract
G1 X109.724 Y96.623 E-0.09845 ; wipe and retract
G1 X109.676 Y96.511 E-0.03213 ; wipe and retract
G1 X109.454 Y96.329 E-0.07574 ; wipe and retract
G1 X109.376 Y96.037 E-0.07993 ; wipe and retract
G1 X109.200 Y96.029 E-0.04642 ; wipe and retract
;WIPE_END
G1 E-1.36743 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X107.492 Y95.631 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.496 Y95.512 E0.00553 ; perimeter
G1 X107.624 Y95.349 E0.00959 ; perimeter
G1 X107.883 Y95.245 E0.01294 ; perimeter
G1 X108.016 Y95.234 E0.00619 ; perimeter
G1 X108.352 Y95.284 E0.01573 ; perimeter
G1 X108.709 Y95.462 E0.01849 ; perimeter
G1 X108.791 Y95.540 E0.00521 ; perimeter
G1 X108.813 Y95.617 E0.00370 ; perimeter
G1 X108.984 Y95.734 E0.00963 ; perimeter
G1 X108.983 Y96.020 E0.01324 ; perimeter
G1 X108.906 Y96.016 E0.00359 ; perimeter
G1 X108.530 Y96.084 E0.01771 ; perimeter
G1 X108.343 Y96.097 E0.00865 ; perimeter
G1 X108.016 Y96.054 E0.01530 ; perimeter
G1 X107.686 Y95.904 E0.01678 ; perimeter
G1 X107.506 Y95.721 E0.01191 ; perimeter
G1 X107.501 Y95.691 E0.00141 ; perimeter
G1 X107.582 Y95.554 F10800.000 ; move inwards before travel
G1 X107.733 Y95.596 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.232611
G1 F2400.000
G1 X108.592 Y95.722 E0.01370 ; infill
G1 X108.602 Y95.755 F10800.000 ; move to first infill point
;WIDTH:0.255246
G1 F2400.000
G1 X107.752 Y95.633 E0.01516 ; infill
G1 X107.747 Y95.579 F10800.000 ; move to first infill point
;WIDTH:0.336186
G1 F2400.000
G1 X108.007 Y95.624 E0.00644 ; infill
;WIDTH:0.346111
G1 X108.039 Y95.633 E0.00085 ; infill
;WIDTH:0.369728
G1 X108.666 Y95.808 E0.01769 ; infill
G1 X108.642 Y95.819 F10800.000 ; move to first infill point
;WIDTH:0.147718
G1 F2400.000
G1 X107.895 Y95.500 E0.00708 ; infill
G1 X109.767 Y96.181 F10800.000 ; move to first infill point
;WIDTH:0.459222
G1 F2400.000
G1 X110.248 Y96.492 E0.01983 ; infill
G1 X110.535 Y96.630 E0.01103 ; infill
;WIDTH:0.363031
G1 X110.761 Y96.736 E0.00665 ; infill
;WIDTH:0.375766
G1 X111.104 Y96.964 E0.01139 ; infill
G1 X111.357 Y97.179 E0.00920 ; infill
G1 X111.466 Y97.305 E0.00460 ; infill
G1 X111.534 Y97.506 E0.00587 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.466 Y97.305 E-0.05594 ; wipe and retract
G1 X111.357 Y97.179 E-0.04390 ; wipe and retract
G1 X111.104 Y96.964 E-0.08769 ; wipe and retract
G1 X110.761 Y96.736 E-0.10856 ; wipe and retract
;WIPE_END
G1 E-2.10390 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X113.967 Y100.978 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.771 Y100.998 E0.00913 ; perimeter
G1 X113.456 Y100.911 E0.01514 ; perimeter
G1 X113.285 Y100.787 E0.00982 ; perimeter
G1 X113.018 Y100.377 E0.02265 ; perimeter
G1 X112.868 Y99.842 E0.02573 ; perimeter
G1 X112.874 Y99.584 E0.01195 ; perimeter
G1 X112.946 Y99.416 E0.00847 ; perimeter
G1 X112.973 Y99.396 E0.00156 ; perimeter
G1 X113.090 Y99.394 E0.00541 ; perimeter
G1 X113.241 Y99.451 E0.00751 ; perimeter
G1 X113.316 Y99.523 E0.00482 ; perimeter
G1 X113.445 Y99.593 E0.00677 ; perimeter
G1 X113.684 Y99.859 E0.01656 ; perimeter
G1 X113.929 Y100.202 E0.01955 ; perimeter
G1 X114.098 Y100.522 E0.01675 ; perimeter
G1 X114.110 Y100.835 E0.01449 ; perimeter
G1 X114.084 Y100.885 E0.00264 ; perimeter
G1 X114.014 Y100.941 E0.00413 ; perimeter
G1 X113.819 Y100.849 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.771 Y100.998 E-0.06584 ; wipe and retract
G1 X113.456 Y100.911 E-0.08623 ; wipe and retract
G1 X113.285 Y100.787 E-0.05592 ; wipe and retract
G1 X113.018 Y100.377 E-0.12901 ; wipe and retract
G1 X112.868 Y99.842 E-0.14661 ; wipe and retract
G1 X112.874 Y99.584 E-0.06807 ; wipe and retract
G1 X112.946 Y99.416 E-0.04828 ; wipe and retract
G1 X112.973 Y99.396 E-0.00890 ; wipe and retract
G1 X113.090 Y99.394 E-0.03081 ; wipe and retract
G1 X113.241 Y99.451 E-0.04277 ; wipe and retract
G1 X113.316 Y99.523 E-0.02748 ; wipe and retract
G1 X113.445 Y99.593 E-0.03855 ; wipe and retract
G1 X113.684 Y99.859 E-0.09434 ; wipe and retract
G1 X113.929 Y100.202 E-0.11136 ; wipe and retract
G1 X114.098 Y100.522 E-0.09542 ; wipe and retract
G1 X114.110 Y100.835 E-0.08256 ; wipe and retract
G1 X114.084 Y100.885 E-0.01505 ; wipe and retract
G1 X114.014 Y100.941 E-0.02355 ; wipe and retract
;WIPE_END
G1 E-1.22925 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 X115.859 Y105.395 ; move to first perimeter point
G1 Z17.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.713 Y105.519 E0.00888 ; perimeter
G1 X115.466 Y105.581 E0.01180 ; perimeter
G1 X115.256 Y105.495 E0.01051 ; perimeter
G1 X115.201 Y105.441 E0.00356 ; perimeter
G1 X115.132 Y105.275 E0.00833 ; perimeter
G1 X115.047 Y104.903 E0.01771 ; perimeter
G1 X114.928 Y104.208 E0.03266 ; perimeter
G1 X114.952 Y103.800 E0.01890 ; perimeter
G1 X114.996 Y103.653 E0.00714 ; perimeter
G1 X115.056 Y103.547 E0.00563 ; perimeter
G1 X115.128 Y103.497 E0.00406 ; perimeter
G1 X115.206 Y103.497 E0.00360 ; perimeter
G1 X115.276 Y103.531 E0.00358 ; perimeter
G1 X115.520 Y103.810 E0.01720 ; perimeter
G1 X115.615 Y103.976 E0.00882 ; perimeter
G1 X115.726 Y104.247 E0.01358 ; perimeter
G1 X115.816 Y104.624 E0.01796 ; perimeter
G1 X115.887 Y105.112 E0.02282 ; perimeter
G1 X115.874 Y105.337 E0.01045 ; perimeter
G1 X115.667 Y105.388 F10800.000 ; move inwards before travel
G1 X115.195 Y103.817 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.324387
G1 F2400.000
G1 X115.352 Y104.367 E0.01339 ; infill
G1 X115.505 Y105.179 E0.01933 ; infill
G1 X115.442 Y105.308 E0.00337 ; infill
;LAYER_CHANGE
;Z:18
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;18
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.505 Y105.179 E-0.03796 ; wipe and retract
G1 X115.352 Y104.367 E-0.21799 ; wipe and retract
G1 X115.195 Y103.817 E-0.15103 ; wipe and retract
;WIPE_END
G1 E-1.99302 F2400.000 ; retract
G1 Z17.875 F10800.000 ; lift Z
G1 Z18.000 ; move to next layer (89)
;AFTER_LAYER_CHANGE
;18
G1 X115.291 Y105.583 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.209 Y105.489 E0.00578 ; perimeter
G1 X115.117 Y105.216 E0.01332 ; perimeter
G1 X115.059 Y104.826 E0.01831 ; perimeter
G1 X114.860 Y103.904 E0.04366 ; perimeter
G1 X114.885 Y103.431 E0.02194 ; perimeter
G1 X115.001 Y103.200 E0.01197 ; perimeter
G1 X115.050 Y103.173 E0.00261 ; perimeter
G1 X115.150 Y103.180 E0.00466 ; perimeter
G1 X115.320 Y103.316 E0.01004 ; perimeter
G1 X115.384 Y103.390 E0.00457 ; perimeter
G1 X115.440 Y103.514 E0.00629 ; perimeter
G1 X115.532 Y103.641 E0.00726 ; perimeter
G1 X115.661 Y103.991 E0.01726 ; perimeter
G1 X115.779 Y104.507 E0.02452 ; perimeter
G1 X115.883 Y105.093 E0.02759 ; perimeter
G1 X115.884 Y105.345 E0.01169 ; perimeter
G1 X115.864 Y105.419 E0.00352 ; perimeter
G1 X115.687 Y105.601 E0.01176 ; perimeter
G1 X115.516 Y105.646 E0.00819 ; perimeter
G1 X115.404 Y105.636 E0.00522 ; perimeter
G1 X115.345 Y105.608 E0.00302 ; perimeter
G1 X115.308 Y105.459 F10800.000 ; move inwards before travel
G1 X115.489 Y105.325 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.227942
G1 F2400.000
G1 X115.517 Y105.255 E0.00115 ; infill
;WIDTH:0.335435
G1 X115.436 Y104.762 E0.01217 ; infill
;WIDTH:0.325609
G1 X115.294 Y104.100 E0.01590 ; infill
G1 X115.122 Y103.512 E0.01439 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.294 Y104.100 E-0.16155 ; wipe and retract
G1 X115.436 Y104.762 E-0.17855 ; wipe and retract
;WIPE_END
G1 E-2.05990 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X114.235 Y100.930 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.196 Y101.023 E0.00470 ; perimeter
G1 X114.116 Y101.096 E0.00499 ; perimeter
G1 X113.907 Y101.120 E0.00976 ; perimeter
G1 X113.605 Y101.036 E0.01452 ; perimeter
G1 X113.377 Y100.842 E0.01386 ; perimeter
G1 X112.981 Y100.240 E0.03335 ; perimeter
G1 X112.828 Y99.899 E0.01734 ; perimeter
G1 X112.732 Y99.583 E0.01529 ; perimeter
G1 X112.723 Y99.282 E0.01395 ; perimeter
G1 X112.784 Y99.118 E0.00812 ; perimeter
G1 X112.901 Y99.108 E0.00542 ; perimeter
G1 X113.142 Y99.209 E0.01212 ; perimeter
G1 X113.315 Y99.374 E0.01108 ; perimeter
G1 X113.369 Y99.403 E0.00287 ; perimeter
G1 X113.512 Y99.567 E0.01005 ; perimeter
G1 X113.867 Y100.100 E0.02966 ; perimeter
G1 X114.036 Y100.305 E0.01229 ; perimeter
G1 X114.207 Y100.627 E0.01692 ; perimeter
G1 X114.237 Y100.870 E0.01132 ; perimeter
G1 X114.140 Y100.966 F10800.000 ; move inwards before travel
G1 X113.874 Y100.861 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.403666
G1 F2400.000
G1 X113.683 Y100.540 E0.01119 ; infill
G1 X113.543 Y100.350 E0.00708 ; infill
;WIDTH:0.378663
G1 X113.317 Y99.990 E0.01189 ; infill
;WIDTH:0.354966
G1 X113.207 Y99.800 E0.00568 ; infill
;WIDTH:0.32704
G1 X112.969 Y99.446 E0.01007 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.207 Y99.800 E-0.11253 ; wipe and retract
;WIPE_END
G1 E-2.28747 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X111.463 Y97.703 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.246 Y97.614 E0.01084 ; perimeter
G1 X110.911 Y97.314 E0.02082 ; perimeter
G1 X110.466 Y97.004 E0.02516 ; perimeter
G1 X110.313 Y96.956 E0.00740 ; perimeter
G1 X110.006 Y96.804 E0.01587 ; perimeter
G1 X109.765 Y96.617 E0.01415 ; perimeter
G1 X109.553 Y96.507 E0.01103 ; perimeter
G1 X109.235 Y96.244 E0.01913 ; perimeter
G1 X108.906 Y96.163 E0.01569 ; perimeter
G1 X108.525 Y96.145 E0.01768 ; perimeter
G1 X108.262 Y96.108 E0.01229 ; perimeter
G1 X108.019 Y96.011 E0.01212 ; perimeter
G1 X107.828 Y95.908 E0.01006 ; perimeter
G1 X107.708 Y95.766 E0.00861 ; perimeter
G1 X107.684 Y95.650 E0.00548 ; perimeter
G1 X107.703 Y95.530 E0.00563 ; perimeter
G1 X107.833 Y95.365 E0.00973 ; perimeter
G1 X107.947 Y95.309 E0.00589 ; perimeter
G1 X108.091 Y95.271 E0.00690 ; perimeter
G1 X108.165 Y95.265 E0.00346 ; perimeter
G1 X108.530 Y95.316 E0.01708 ; perimeter
G1 X109.077 Y95.559 E0.02771 ; perimeter
G1 X109.305 Y95.738 E0.01343 ; perimeter
G1 X109.528 Y95.802 E0.01075 ; perimeter
G1 X109.634 Y95.780 E0.00499 ; perimeter
G1 X110.307 Y95.983 E0.03259 ; perimeter
G1 X110.549 Y96.107 E0.01257 ; perimeter
G1 X110.552 Y96.124 E0.00080 ; perimeter
G1 X111.332 Y96.578 E0.04179 ; perimeter
G1 X111.677 Y96.850 E0.02038 ; perimeter
G1 X111.865 Y97.129 E0.01555 ; perimeter
G1 X111.838 Y97.463 E0.01551 ; perimeter
G1 X111.717 Y97.652 E0.01043 ; perimeter
G1 X111.522 Y97.700 E0.00927 ; perimeter
G1 X111.361 Y97.493 F10800.000 ; move inwards before travel
G1 X111.531 Y97.458 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334795
G1 F2400.000
G1 X111.450 Y97.247 E0.00548 ; infill
G1 X111.361 Y97.144 E0.00331 ; infill
G1 X111.163 Y96.979 E0.00626 ; infill
G1 X110.918 Y96.810 E0.00722 ; infill
G1 X110.666 Y96.651 E0.00723 ; infill
G1 X109.987 Y96.295 E0.01862 ; infill
G1 X109.391 Y96.051 E0.01562 ; infill
G1 X108.862 Y95.828 F10800.000 ; move to first infill point
;WIDTH:0.26502
G1 F2400.000
G1 X108.561 Y95.757 E0.00571 ; infill
;WIDTH:0.383962
G1 X108.184 Y95.659 E0.01104 ; infill
;WIDTH:0.336968
G1 X108.156 Y95.650 E0.00073 ; infill
;WIDTH:0.326242
G1 X107.949 Y95.607 E0.00498 ; infill
G1 X107.937 Y95.663 F10800.000 ; move to first infill point
;WIDTH:0.248877
G1 F2400.000
G1 X108.055 Y95.639 E0.00206 ; infill
;WIDTH:0.262523
G1 X108.690 Y95.651 E0.01160 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.055 Y95.639 E-0.16764 ; wipe and retract
;WIPE_END
G1 E-2.23236 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X111.166 Y96.758 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.145105
G1 F2400.000
G1 X111.514 Y97.412 E0.00629 ; infill
;WIDTH:0.136298
G1 X111.541 Y97.457 E0.00041 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.514 Y97.412 E-0.01384 ; wipe and retract
;WIPE_END
G1 E-2.38616 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X105.435 Y94.368 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.409 Y94.502 E0.00630 ; perimeter
G1 X105.302 Y94.726 E0.01151 ; perimeter
G1 X105.154 Y94.791 E0.00752 ; perimeter
G1 X105.019 Y94.813 E0.00633 ; perimeter
G1 X104.854 Y94.792 E0.00771 ; perimeter
G1 X104.690 Y94.691 E0.00890 ; perimeter
G1 X104.582 Y94.463 E0.01170 ; perimeter
G1 X104.563 Y94.296 E0.00779 ; perimeter
G1 X104.691 Y94.107 E0.01054 ; perimeter
G1 X104.857 Y94.042 E0.00826 ; perimeter
G1 X105.005 Y94.022 E0.00691 ; perimeter
G1 X105.149 Y94.044 E0.00676 ; perimeter
G1 X105.211 Y94.097 E0.00379 ; perimeter
G1 X105.281 Y94.115 E0.00333 ; perimeter
G1 X105.416 Y94.311 E0.01103 ; perimeter
G1 X105.325 Y94.448 F10800.000 ; move inwards before travel
G1 X104.985 Y94.411 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.337064
G1 F2400.000
G1 X104.990 Y94.418 E0.00023 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.985 Y94.411 E-0.00246 ; wipe and retract
;WIPE_END
G1 E-2.39754 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X102.686 Y94.503 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.726 Y94.577 E0.00391 ; perimeter
G1 X102.750 Y94.692 E0.00544 ; perimeter
G1 X102.707 Y94.890 E0.00939 ; perimeter
G1 X102.623 Y95.017 E0.00705 ; perimeter
G1 X102.360 Y95.202 E0.01492 ; perimeter
G1 X101.669 Y95.469 E0.03433 ; perimeter
G1 X100.694 Y96.177 E0.05583 ; perimeter
G1 X100.327 Y96.561 E0.02456 ; perimeter
G1 X100.049 Y96.983 E0.02343 ; perimeter
G1 X99.833 Y97.391 E0.02139 ; perimeter
G1 X99.559 Y97.499 E0.01364 ; perimeter
G1 X99.508 Y97.491 E0.00235 ; perimeter
G1 X99.398 Y97.387 E0.00704 ; perimeter
G1 X99.325 Y97.353 E0.00373 ; perimeter
G1 X99.278 Y97.194 E0.00765 ; perimeter
G1 X99.217 Y97.097 E0.00531 ; perimeter
G1 X99.216 Y96.796 E0.01395 ; perimeter
G1 X99.366 Y96.447 E0.01761 ; perimeter
G1 X99.766 Y96.007 E0.02754 ; perimeter
G1 X100.290 Y95.500 E0.03374 ; perimeter
G1 X100.668 Y95.165 E0.02341 ; perimeter
G1 X101.073 Y94.948 E0.02129 ; perimeter
G1 X101.414 Y94.809 E0.01707 ; perimeter
G1 X101.667 Y94.629 E0.01437 ; perimeter
G1 X102.029 Y94.429 E0.01917 ; perimeter
G1 X102.286 Y94.388 E0.01204 ; perimeter
G1 X102.540 Y94.412 E0.01180 ; perimeter
G1 X102.635 Y94.471 E0.00521 ; perimeter
G1 X102.662 Y94.583 F10800.000 ; move inwards before travel
G1 X102.459 Y94.646 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.39425
G1 F2400.000
G1 X102.162 Y94.832 E0.01023 ; infill
G1 X101.878 Y94.965 E0.00917 ; infill
;WIDTH:0.351618
G1 X101.738 Y95.040 E0.00408 ; infill
;WIDTH:0.312156
G1 X101.597 Y95.115 E0.00356 ; infill
;WIDTH:0.272695
G1 X101.073 Y95.405 E0.01145 ; infill
;WIDTH:0.392248
G1 X100.907 Y95.509 E0.00569 ; infill
G1 X100.557 Y95.790 E0.01303 ; infill
;WIDTH:0.348708
G1 X100.450 Y95.879 E0.00355 ; infill
;WIDTH:0.329117
G1 X100.027 Y96.304 E0.01427 ; infill
G1 X99.732 Y96.682 E0.01142 ; infill
G1 X99.513 Y97.144 E0.01215 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.732 Y96.682 E-0.13472 ; wipe and retract
G1 X100.027 Y96.304 E-0.12658 ; wipe and retract
G1 X100.450 Y95.879 E-0.15820 ; wipe and retract
;WIPE_END
G1 E-1.98049 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X99.149 Y99.122 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.304 Y99.222 E0.00852 ; perimeter
G1 X99.375 Y99.325 E0.00579 ; perimeter
G1 X99.430 Y99.527 E0.00972 ; perimeter
G1 X99.449 Y99.811 E0.01319 ; perimeter
G1 X99.418 Y99.995 E0.00863 ; perimeter
G1 X99.273 Y100.146 E0.00973 ; perimeter
G1 X99.231 Y100.246 E0.00499 ; perimeter
G1 X99.142 Y100.306 E0.00499 ; perimeter
G1 X99.061 Y100.310 E0.00374 ; perimeter
G1 X98.900 Y100.243 E0.00808 ; perimeter
G1 X98.790 Y100.112 E0.00794 ; perimeter
G1 X98.702 Y100.059 E0.00474 ; perimeter
G1 X98.670 Y100.004 E0.00296 ; perimeter
G1 X98.616 Y99.744 E0.01227 ; perimeter
G1 X98.646 Y99.513 E0.01081 ; perimeter
G1 X98.781 Y99.332 E0.01047 ; perimeter
G1 X99.097 Y99.153 E0.01683 ; perimeter
G1 X99.214 Y99.294 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.304 Y99.222 E-0.05746 ; wipe and retract
G1 X99.375 Y99.325 E-0.03299 ; wipe and retract
G1 X99.430 Y99.527 E-0.05538 ; wipe and retract
G1 X99.449 Y99.811 E-0.07514 ; wipe and retract
G1 X99.418 Y99.995 E-0.04916 ; wipe and retract
G1 X99.273 Y100.146 E-0.05543 ; wipe and retract
G1 X99.231 Y100.246 E-0.02844 ; wipe and retract
G1 X99.142 Y100.306 E-0.02845 ; wipe and retract
G1 X99.061 Y100.310 E-0.02131 ; wipe and retract
G1 X98.900 Y100.243 E-0.04601 ; wipe and retract
G1 X98.790 Y100.112 E-0.04522 ; wipe and retract
G1 X98.702 Y100.059 E-0.02698 ; wipe and retract
G1 X98.670 Y100.004 E-0.01687 ; wipe and retract
G1 X98.616 Y99.744 E-0.06992 ; wipe and retract
G1 X98.646 Y99.513 E-0.06159 ; wipe and retract
G1 X98.781 Y99.332 E-0.05964 ; wipe and retract
G1 X99.097 Y99.153 E-0.09586 ; wipe and retract
;WIPE_END
G1 E-1.57414 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X101.064 Y104.543 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.384 Y104.693 E0.01636 ; perimeter
G1 X101.626 Y104.989 E0.01771 ; perimeter
G1 X101.789 Y105.293 E0.01598 ; perimeter
G1 X101.938 Y105.740 E0.02181 ; perimeter
G1 X101.982 Y105.911 E0.00820 ; perimeter
G1 X102.002 Y106.102 E0.00889 ; perimeter
G1 X101.986 Y106.231 E0.00601 ; perimeter
G1 X101.932 Y106.326 E0.00505 ; perimeter
G1 X101.817 Y106.419 E0.00688 ; perimeter
G1 X101.557 Y106.461 E0.01221 ; perimeter
G1 X101.352 Y106.377 E0.01023 ; perimeter
G1 X101.228 Y106.280 E0.00731 ; perimeter
G1 X101.125 Y105.925 E0.01711 ; perimeter
G1 X101.057 Y105.475 E0.02106 ; perimeter
G1 X101.065 Y105.402 E0.00342 ; perimeter
G1 X101.027 Y105.153 E0.01168 ; perimeter
G1 X101.053 Y104.869 E0.01320 ; perimeter
G1 X100.955 Y104.675 E0.01008 ; perimeter
G1 X100.899 Y104.425 E0.01188 ; perimeter
G1 X100.282 Y103.903 E0.03741 ; perimeter
G1 X100.052 Y103.670 E0.01518 ; perimeter
G1 X99.914 Y103.565 E0.00805 ; perimeter
G1 X99.708 Y103.325 E0.01466 ; perimeter
G1 X99.547 Y102.890 E0.02147 ; perimeter
G1 X99.547 Y102.670 E0.01017 ; perimeter
G1 X99.577 Y102.547 E0.00587 ; perimeter
G1 X99.728 Y102.329 E0.01227 ; perimeter
G1 X99.830 Y102.292 E0.00505 ; perimeter
G1 X99.897 Y102.294 E0.00309 ; perimeter
G1 X100.039 Y102.382 E0.00775 ; perimeter
G1 X100.093 Y102.387 E0.00250 ; perimeter
G1 X100.226 Y102.530 E0.00910 ; perimeter
G1 X100.337 Y102.701 E0.00944 ; perimeter
G1 X100.459 Y103.231 E0.02517 ; perimeter
G1 X100.543 Y103.361 E0.00717 ; perimeter
G1 X100.588 Y103.569 E0.00983 ; perimeter
G1 X100.763 Y103.827 E0.01446 ; perimeter
G1 X100.802 Y103.978 E0.00720 ; perimeter
G1 X100.982 Y104.235 E0.01453 ; perimeter
G1 X101.049 Y104.485 E0.01201 ; perimeter
G1 X101.013 Y104.893 F10800.000 ; move inwards before travel
G1 X101.282 Y105.004 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.206674
G1 F2400.000
G1 X101.356 Y105.169 E0.00246 ; infill
;WIDTH:0.243732
G1 X101.391 Y105.274 E0.00184 ; infill
;WIDTH:0.28079
G1 X101.426 Y105.378 E0.00218 ; infill
;WIDTH:0.296224
G1 X101.434 Y105.410 E0.00070 ; infill
;WIDTH:0.316401
G1 X101.441 Y105.444 E0.00078 ; infill
;WIDTH:0.326605
G1 X101.443 Y105.467 E0.00056 ; infill
;WIDTH:0.359363
G1 X101.488 Y105.652 E0.00499 ; infill
;WIDTH:0.38112
G1 X101.582 Y106.028 E0.01089 ; infill
G1 X101.705 Y106.193 E0.00581 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.582 Y106.028 E-0.05448 ; wipe and retract
G1 X101.488 Y105.652 E-0.10223 ; wipe and retract
;WIPE_END
G1 E-2.24329 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X100.340 Y103.563 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.149998
G1 F2400.000
G1 X100.159 Y103.349 E0.00249 ; infill
G1 X99.788 Y102.796 E0.00593 ; infill
G1 X99.915 Y102.735 F10800.000 ; move to first infill point
;WIDTH:0.319407
G1 F2400.000
G1 X100.211 Y103.488 E0.01860 ; infill
G1 X100.135 Y103.430 F10800.000 ; move to first infill point
;WIDTH:0.335595
G1 F2400.000
G1 X99.957 Y102.848 E0.01480 ; infill
G1 X99.833 Y102.601 E0.00673 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.957 Y102.848 E-0.07303 ; wipe and retract
G1 X100.135 Y103.430 E-0.16054 ; wipe and retract
;WIPE_END
G1 E-2.16643 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X103.746 Y108.307 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.843 Y108.154 E0.00834 ; perimeter
G1 X104.235 Y108.042 E0.01893 ; perimeter
G1 X104.497 Y108.104 E0.01244 ; perimeter
G1 X105.214 Y108.493 E0.03778 ; perimeter
G1 X106.209 Y109.080 E0.05354 ; perimeter
G1 X107.735 Y109.887 E0.07998 ; perimeter
G1 X107.891 Y109.952 E0.00780 ; perimeter
G1 X108.067 Y110.096 E0.01054 ; perimeter
G1 X108.167 Y110.302 E0.01058 ; perimeter
G1 X108.174 Y110.400 E0.00457 ; perimeter
G1 X108.118 Y110.519 E0.00610 ; perimeter
G1 X108.010 Y110.665 E0.00839 ; perimeter
G1 X107.830 Y110.726 E0.00880 ; perimeter
G1 X107.733 Y110.735 E0.00452 ; perimeter
G1 X107.515 Y110.680 E0.01041 ; perimeter
G1 X105.881 Y109.767 E0.08670 ; perimeter
G1 X105.003 Y109.243 E0.04737 ; perimeter
G1 X104.595 Y109.083 E0.02031 ; perimeter
G1 X104.313 Y108.937 E0.01471 ; perimeter
G1 X103.912 Y108.693 E0.02176 ; perimeter
G1 X103.806 Y108.554 E0.00809 ; perimeter
G1 X103.760 Y108.365 E0.00900 ; perimeter
G1 X103.919 Y108.256 F10800.000 ; move inwards before travel
G1 X104.030 Y108.352 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.321614
G1 F2400.000
G1 X104.349 Y108.485 E0.00802 ; infill
G1 X104.763 Y108.712 E0.01094 ; infill
G1 X105.159 Y108.899 E0.01015 ; infill
G1 X106.071 Y109.438 E0.02455 ; infill
;WIDTH:0.361102
G1 X107.572 Y110.253 E0.04517 ; infill
;WIDTH:0.373535
G1 X107.916 Y110.382 E0.01012 ; infill
G1 X107.904 Y110.404 F10800.000 ; move to first infill point
;WIDTH:0.333125
G1 F2400.000
G1 X107.757 Y110.343 E0.00383 ; infill
G1 X107.162 Y109.857 E0.01854 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.757 Y110.343 E-0.20272 ; wipe and retract
G1 X107.904 Y110.404 E-0.04183 ; wipe and retract
;WIPE_END
G1 E-2.15545 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X110.072 Y112.728 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.255 Y112.656 E0.00910 ; perimeter
G1 X110.490 Y112.675 E0.01096 ; perimeter
G1 X110.698 Y112.777 E0.01073 ; perimeter
G1 X110.764 Y112.832 E0.00399 ; perimeter
G1 X110.875 Y112.995 E0.00912 ; perimeter
G1 X110.913 Y113.123 E0.00620 ; perimeter
G1 X110.908 Y113.282 E0.00733 ; perimeter
G1 X110.865 Y113.393 E0.00552 ; perimeter
G1 X110.806 Y113.453 E0.00390 ; perimeter
G1 X110.605 Y113.519 E0.00980 ; perimeter
G1 X110.326 Y113.475 E0.01308 ; perimeter
G1 X110.120 Y113.351 E0.01114 ; perimeter
G1 X110.024 Y113.230 E0.00715 ; perimeter
G1 X109.956 Y113.004 E0.01095 ; perimeter
G1 X109.989 Y112.828 E0.00828 ; perimeter
G1 X110.034 Y112.774 E0.00325 ; perimeter
G1 X110.253 Y112.806 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.255 Y112.656 E-0.06616 ; wipe and retract
G1 X110.490 Y112.675 E-0.06245 ; wipe and retract
G1 X110.698 Y112.777 E-0.06113 ; wipe and retract
G1 X110.764 Y112.832 E-0.02271 ; wipe and retract
G1 X110.875 Y112.995 E-0.05193 ; wipe and retract
G1 X110.913 Y113.123 E-0.03530 ; wipe and retract
G1 X110.908 Y113.282 E-0.04176 ; wipe and retract
G1 X110.865 Y113.393 E-0.03145 ; wipe and retract
G1 X110.806 Y113.453 E-0.02220 ; wipe and retract
G1 X110.605 Y113.519 E-0.05581 ; wipe and retract
G1 X110.326 Y113.475 E-0.07450 ; wipe and retract
G1 X110.120 Y113.351 E-0.06344 ; wipe and retract
G1 X110.024 Y113.230 E-0.04074 ; wipe and retract
G1 X109.956 Y113.004 E-0.06239 ; wipe and retract
G1 X109.989 Y112.828 E-0.04715 ; wipe and retract
G1 X110.034 Y112.774 E-0.01850 ; wipe and retract
;WIPE_END
G1 E-1.64237 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X115.148 Y111.975 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.132 Y111.814 E0.00751 ; perimeter
G1 X115.150 Y111.705 E0.00513 ; perimeter
G1 X115.273 Y111.507 E0.01080 ; perimeter
G1 X115.432 Y111.432 E0.00812 ; perimeter
G1 X115.522 Y111.423 E0.00419 ; perimeter
G1 X115.688 Y111.472 E0.00801 ; perimeter
G1 X115.837 Y111.603 E0.00921 ; perimeter
G1 X115.872 Y111.672 E0.00357 ; perimeter
G1 X115.889 Y111.965 E0.01360 ; perimeter
G1 X115.811 Y112.138 E0.00881 ; perimeter
G1 X115.733 Y112.210 E0.00491 ; perimeter
G1 X115.518 Y112.274 E0.01040 ; perimeter
G1 X115.413 Y112.264 E0.00489 ; perimeter
G1 X115.299 Y112.209 E0.00586 ; perimeter
G1 X115.165 Y112.033 E0.01022 ; perimeter
G1 X115.257 Y111.855 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.132 Y111.814 E-0.05839 ; wipe and retract
G1 X115.150 Y111.705 E-0.02922 ; wipe and retract
G1 X115.273 Y111.507 E-0.06154 ; wipe and retract
G1 X115.432 Y111.432 E-0.04628 ; wipe and retract
G1 X115.522 Y111.423 E-0.02387 ; wipe and retract
G1 X115.688 Y111.472 E-0.04561 ; wipe and retract
G1 X115.837 Y111.603 E-0.05249 ; wipe and retract
G1 X115.872 Y111.672 E-0.02035 ; wipe and retract
G1 X115.889 Y111.965 E-0.07748 ; wipe and retract
G1 X115.811 Y112.138 E-0.05021 ; wipe and retract
G1 X115.733 Y112.210 E-0.02795 ; wipe and retract
G1 X115.518 Y112.274 E-0.05923 ; wipe and retract
G1 X115.413 Y112.264 E-0.02787 ; wipe and retract
G1 X115.299 Y112.209 E-0.03337 ; wipe and retract
G1 X115.165 Y112.033 E-0.05825 ; wipe and retract
;WIPE_END
G1 E-1.72790 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X113.154 Y115.351 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.418 Y115.419 E0.01265 ; perimeter
G1 X113.536 Y115.507 E0.00679 ; perimeter
G1 X113.644 Y115.538 E0.00523 ; perimeter
G1 X113.846 Y115.721 E0.01260 ; perimeter
G1 X113.474 Y116.060 E0.02333 ; perimeter
G1 X113.349 Y116.132 E0.00667 ; perimeter
G1 X113.283 Y116.148 E0.00314 ; perimeter
G1 X113.093 Y116.154 E0.00881 ; perimeter
G1 X112.867 Y116.105 E0.01073 ; perimeter
G1 X112.738 Y116.002 E0.00763 ; perimeter
G1 X112.676 Y115.878 E0.00643 ; perimeter
G1 X112.688 Y115.609 E0.01247 ; perimeter
G1 X112.747 Y115.497 E0.00587 ; perimeter
G1 X112.795 Y115.459 E0.00284 ; perimeter
G1 X112.994 Y115.374 E0.00999 ; perimeter
G1 X113.095 Y115.359 E0.00472 ; perimeter
G1 X113.273 Y115.596 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.418 Y115.419 E-0.08684 ; wipe and retract
G1 X113.536 Y115.507 E-0.03866 ; wipe and retract
G1 X113.644 Y115.538 E-0.02982 ; wipe and retract
G1 X113.846 Y115.721 E-0.07179 ; wipe and retract
G1 X113.474 Y116.060 E-0.13290 ; wipe and retract
G1 X113.349 Y116.132 E-0.03801 ; wipe and retract
G1 X113.283 Y116.148 E-0.01791 ; wipe and retract
G1 X113.093 Y116.154 E-0.05017 ; wipe and retract
G1 X112.867 Y116.105 E-0.06115 ; wipe and retract
G1 X112.738 Y116.002 E-0.04347 ; wipe and retract
G1 X112.676 Y115.878 E-0.03661 ; wipe and retract
G1 X112.688 Y115.609 E-0.07101 ; wipe and retract
G1 X112.747 Y115.497 E-0.03342 ; wipe and retract
G1 X112.795 Y115.459 E-0.01619 ; wipe and retract
G1 X112.994 Y115.374 E-0.05691 ; wipe and retract
G1 X113.095 Y115.359 E-0.02689 ; wipe and retract
;WIPE_END
G1 E-1.58825 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 X115.666 Y114.537 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.781 Y114.659 E0.00778 ; perimeter
G1 X115.828 Y114.794 E0.00663 ; perimeter
G1 X115.830 Y114.944 E0.00695 ; perimeter
G1 X115.797 Y115.068 E0.00592 ; perimeter
G1 X115.751 Y115.152 E0.00445 ; perimeter
G1 X115.185 Y115.820 E0.04056 ; perimeter
G1 X115.078 Y115.904 E0.00631 ; perimeter
G1 X114.938 Y115.959 E0.00695 ; perimeter
G1 X114.782 Y115.966 E0.00725 ; perimeter
G1 X114.612 Y115.923 E0.00811 ; perimeter
G1 X114.293 Y115.779 E0.01618 ; perimeter
G1 X114.247 Y115.783 E0.00218 ; perimeter
G1 X114.063 Y115.707 E0.00919 ; perimeter
G1 X114.360 Y115.466 E0.01769 ; perimeter
G1 X115.134 Y114.613 E0.05338 ; perimeter
G1 X115.266 Y114.511 E0.00772 ; perimeter
G1 X115.481 Y114.474 E0.01011 ; perimeter
G1 X115.612 Y114.510 E0.00631 ; perimeter
G1 X115.659 Y114.705 F10800.000 ; move inwards before travel
G1 X115.519 Y114.733 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.246902
G1 F2400.000
G1 X115.453 Y114.860 E0.00242 ; infill
;WIDTH:0.356975
G1 X114.889 Y115.513 E0.02255 ; infill
G1 X114.611 Y115.658 E0.00819 ; infill
;LAYER_CHANGE
;Z:18.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;18.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.889 Y115.513 E-0.08272 ; wipe and retract
G1 X115.453 Y114.860 E-0.22791 ; wipe and retract
;WIPE_END
G1 E-2.08937 F2400.000 ; retract
G1 Z18.075 F10800.000 ; lift Z
G1 Z18.200 ; move to next layer (90)
;AFTER_LAYER_CHANGE
;18.2
G1 Z18.275 ; lift Z
G1 X115.545 Y105.713 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.394 Y105.703 E0.00699 ; perimeter
G1 X115.282 Y105.649 E0.00574 ; perimeter
G1 X115.225 Y105.576 E0.00431 ; perimeter
G1 X115.144 Y105.371 E0.01021 ; perimeter
G1 X115.083 Y104.829 E0.02526 ; perimeter
G1 X114.908 Y104.051 E0.03695 ; perimeter
G1 X114.831 Y103.864 E0.00935 ; perimeter
G1 X114.791 Y103.688 E0.00836 ; perimeter
G1 X114.773 Y103.462 E0.01049 ; perimeter
G1 X114.816 Y103.069 E0.01831 ; perimeter
G1 X114.907 Y102.874 E0.00997 ; perimeter
G1 X114.952 Y102.845 E0.00248 ; perimeter
G1 X115.078 Y102.853 E0.00588 ; perimeter
G1 X115.308 Y103.063 E0.01440 ; perimeter
G1 X115.455 Y103.317 E0.01363 ; perimeter
G1 X115.594 Y103.717 E0.01961 ; perimeter
G1 X115.688 Y104.200 E0.02279 ; perimeter
G1 X115.725 Y104.562 E0.01688 ; perimeter
G1 X115.800 Y104.789 E0.01104 ; perimeter
G1 X115.884 Y105.180 E0.01853 ; perimeter
G1 X115.880 Y105.388 E0.00964 ; perimeter
G1 X115.830 Y105.519 E0.00650 ; perimeter
G1 X115.669 Y105.680 E0.01052 ; perimeter
G1 X115.603 Y105.698 E0.00320 ; perimeter
G1 X115.450 Y105.596 F10800.000 ; move inwards before travel
G1 X115.631 Y105.364 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.292147
G1 F2400.000
G1 X115.516 Y105.316 E0.00259 ; infill
G1 X115.452 Y104.883 E0.00906 ; infill
;WIDTH:0.281862
G1 X115.428 Y104.777 E0.00217 ; infill
;WIDTH:0.25911
G1 X115.392 Y104.645 E0.00245 ; infill
;WIDTH:0.245108
G1 X115.263 Y103.950 E0.01188 ; infill
G1 X115.130 Y103.467 E0.00842 ; infill
G1 X115.100 Y103.199 E0.00454 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.130 Y103.467 E-0.07127 ; wipe and retract
G1 X115.263 Y103.950 E-0.13216 ; wipe and retract
G1 X115.392 Y104.645 E-0.18651 ; wipe and retract
;WIPE_END
G1 E-2.01006 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X114.355 Y101.040 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.325 Y101.142 E0.00491 ; perimeter
G1 X114.228 Y101.242 E0.00645 ; perimeter
G1 X114.150 Y101.264 E0.00373 ; perimeter
G1 X114.007 Y101.261 E0.00665 ; perimeter
G1 X113.803 Y101.203 E0.00981 ; perimeter
G1 X113.708 Y101.150 E0.00504 ; perimeter
G1 X113.493 Y100.937 E0.01402 ; perimeter
G1 X112.929 Y100.080 E0.04754 ; perimeter
G1 X112.655 Y99.578 E0.02648 ; perimeter
G1 X112.553 Y99.225 E0.01704 ; perimeter
G1 X112.545 Y99.030 E0.00905 ; perimeter
G1 X112.583 Y98.863 E0.00791 ; perimeter
G1 X112.627 Y98.828 E0.00258 ; perimeter
G1 X112.723 Y98.822 E0.00447 ; perimeter
G1 X112.977 Y98.926 E0.01273 ; perimeter
G1 X113.256 Y99.173 E0.01725 ; perimeter
G1 X113.488 Y99.505 E0.01877 ; perimeter
G1 X113.621 Y99.774 E0.01388 ; perimeter
G1 X113.950 Y100.232 E0.02616 ; perimeter
G1 X114.167 Y100.461 E0.01461 ; perimeter
G1 X114.324 Y100.742 E0.01491 ; perimeter
G1 X114.356 Y100.853 E0.00535 ; perimeter
G1 X114.355 Y100.980 E0.00588 ; perimeter
G1 X114.256 Y101.078 F10800.000 ; move inwards before travel
G1 X114.114 Y101.006 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.281239
G1 F2400.000
G1 X113.940 Y100.840 E0.00476 ; infill
;WIDTH:0.374783
G1 X113.659 Y100.486 E0.01248 ; infill
;WIDTH:0.333007
G1 X113.306 Y99.975 E0.01497 ; infill
;WIDTH:0.307477
G1 X112.995 Y99.438 E0.01366 ; infill
;WIDTH:0.292611
G1 X112.850 Y99.134 E0.00700 ; infill
G1 X111.780 Y97.631 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.651 Y97.690 E0.00656 ; perimeter
G1 X111.542 Y97.667 E0.00516 ; perimeter
G1 X111.476 Y97.675 E0.00308 ; perimeter
G1 X111.238 Y97.565 E0.01216 ; perimeter
G1 X111.046 Y97.412 E0.01136 ; perimeter
G1 X110.993 Y97.335 E0.00434 ; perimeter
G1 X110.819 Y97.187 E0.01058 ; perimeter
G1 X110.424 Y96.915 E0.02221 ; perimeter
G1 X109.906 Y96.693 E0.02610 ; perimeter
G1 X109.576 Y96.506 E0.01760 ; perimeter
G1 X109.276 Y96.376 E0.01514 ; perimeter
G1 X108.660 Y96.185 E0.02983 ; perimeter
G1 X108.505 Y96.162 E0.00730 ; perimeter
G1 X108.363 Y96.116 E0.00691 ; perimeter
G1 X108.020 Y95.949 E0.01768 ; perimeter
G1 X107.911 Y95.812 E0.00809 ; perimeter
G1 X107.869 Y95.637 E0.00836 ; perimeter
G1 X107.885 Y95.544 E0.00435 ; perimeter
G1 X108.052 Y95.366 E0.01131 ; perimeter
G1 X108.336 Y95.299 E0.01354 ; perimeter
G1 X108.676 Y95.344 E0.01589 ; perimeter
G1 X109.426 Y95.653 E0.03756 ; perimeter
G1 X109.804 Y95.773 E0.01835 ; perimeter
G1 X109.982 Y95.862 E0.00925 ; perimeter
G1 X110.209 Y95.930 E0.01094 ; perimeter
G1 X111.003 Y96.395 E0.04261 ; perimeter
G1 X111.298 Y96.605 E0.01680 ; perimeter
G1 X111.555 Y96.747 E0.01359 ; perimeter
G1 X111.692 Y96.855 E0.00811 ; perimeter
G1 X111.884 Y97.127 E0.01541 ; perimeter
G1 X111.909 Y97.215 E0.00423 ; perimeter
G1 X111.861 Y97.494 E0.01310 ; perimeter
G1 X111.811 Y97.579 E0.00461 ; perimeter
G1 X111.647 Y97.584 F10800.000 ; move inwards before travel
G1 X111.631 Y97.407 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.398991
G1 F2400.000
G1 X111.326 Y97.092 E0.01298 ; infill
;WIDTH:0.385598
G1 X111.312 Y97.078 E0.00057 ; infill
;WIDTH:0.376308
G1 X111.277 Y97.051 E0.00122 ; infill
;WIDTH:0.361511
G1 X111.103 Y96.931 E0.00561 ; infill
;WIDTH:0.319028
G1 X110.614 Y96.596 E0.01359 ; infill
;WIDTH:0.302082
G1 X109.660 Y96.127 E0.02292 ; infill
G1 X108.759 Y95.804 E0.02062 ; infill
G1 X108.152 Y95.626 E0.01364 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.759 Y95.804 E-0.16701 ; wipe and retract
G1 X109.660 Y96.127 E-0.25246 ; wipe and retract
G1 X110.614 Y96.596 E-0.28062 ; wipe and retract
;WIPE_END
G1 E-1.69991 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X105.444 Y94.391 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.415 Y94.520 E0.00611 ; perimeter
G1 X105.302 Y94.718 E0.01060 ; perimeter
G1 X105.047 Y94.799 E0.01239 ; perimeter
G1 X104.822 Y94.776 E0.01049 ; perimeter
G1 X104.649 Y94.672 E0.00934 ; perimeter
G1 X104.519 Y94.493 E0.01022 ; perimeter
G1 X104.501 Y94.328 E0.00772 ; perimeter
G1 X104.566 Y94.168 E0.00798 ; perimeter
G1 X104.620 Y94.140 E0.00284 ; perimeter
G1 X104.689 Y94.068 E0.00461 ; perimeter
G1 X104.986 Y94.011 E0.01400 ; perimeter
G1 X105.183 Y94.041 E0.00924 ; perimeter
G1 X105.291 Y94.118 E0.00613 ; perimeter
G1 X105.422 Y94.335 E0.01176 ; perimeter
G1 X105.334 Y94.464 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.415 Y94.520 E-0.04876 ; wipe and retract
G1 X105.302 Y94.718 E-0.06036 ; wipe and retract
G1 X105.047 Y94.799 E-0.07060 ; wipe and retract
G1 X104.822 Y94.776 E-0.05974 ; wipe and retract
G1 X104.649 Y94.672 E-0.05319 ; wipe and retract
G1 X104.519 Y94.493 E-0.05824 ; wipe and retract
G1 X104.501 Y94.328 E-0.04399 ; wipe and retract
G1 X104.566 Y94.168 E-0.04548 ; wipe and retract
G1 X104.620 Y94.140 E-0.01619 ; wipe and retract
G1 X104.689 Y94.068 E-0.02625 ; wipe and retract
G1 X104.986 Y94.011 E-0.07974 ; wipe and retract
G1 X105.183 Y94.041 E-0.05261 ; wipe and retract
G1 X105.291 Y94.118 E-0.03491 ; wipe and retract
G1 X105.422 Y94.335 E-0.06701 ; wipe and retract
;WIPE_END
G1 E-1.68292 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X102.747 Y94.365 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.849 Y94.431 E0.00562 ; perimeter
G1 X102.909 Y94.600 E0.00831 ; perimeter
G1 X102.857 Y94.838 E0.01128 ; perimeter
G1 X102.758 Y94.976 E0.00786 ; perimeter
G1 X102.382 Y95.224 E0.02087 ; perimeter
G1 X102.080 Y95.350 E0.01512 ; perimeter
G1 X101.685 Y95.463 E0.01904 ; perimeter
G1 X101.248 Y95.820 E0.02615 ; perimeter
G1 X100.437 Y96.416 E0.04662 ; perimeter
G1 X100.283 Y96.573 E0.01018 ; perimeter
G1 X99.821 Y97.517 E0.04871 ; perimeter
G1 X99.580 Y97.707 E0.01421 ; perimeter
G1 X99.554 Y97.707 E0.00122 ; perimeter
G1 X99.411 Y97.595 E0.00843 ; perimeter
G1 X99.351 Y97.486 E0.00573 ; perimeter
G1 X99.348 Y97.369 E0.00545 ; perimeter
G1 X99.265 Y97.258 E0.00640 ; perimeter
G1 X99.244 Y97.172 E0.00412 ; perimeter
G1 X99.271 Y97.027 E0.00682 ; perimeter
G1 X99.271 Y96.788 E0.01109 ; perimeter
G1 X99.448 Y96.384 E0.02043 ; perimeter
G1 X100.037 Y95.739 E0.04044 ; perimeter
G1 X100.254 Y95.526 E0.01409 ; perimeter
G1 X100.627 Y95.209 E0.02267 ; perimeter
G1 X101.035 Y95.014 E0.02094 ; perimeter
G1 X101.382 Y94.883 E0.01719 ; perimeter
G1 X101.795 Y94.596 E0.02331 ; perimeter
G1 X102.168 Y94.387 E0.01979 ; perimeter
G1 X102.494 Y94.322 E0.01539 ; perimeter
G1 X102.689 Y94.351 E0.00912 ; perimeter
G1 X102.765 Y94.485 F10800.000 ; move inwards before travel
G1 X102.652 Y94.646 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.387598
G1 F2400.000
G1 X102.313 Y94.780 E0.01045 ; infill
G1 X102.011 Y94.940 E0.00981 ; infill
;WIDTH:0.371041
G1 X101.949 Y94.974 E0.00192 ; infill
;WIDTH:0.356131
G1 X101.815 Y95.037 E0.00385 ; infill
;WIDTH:0.307616
G1 X101.682 Y95.101 E0.00325 ; infill
;WIDTH:0.259101
G1 X101.548 Y95.164 E0.00266 ; infill
;WIDTH:0.210587
G1 X101.297 Y95.307 E0.00403 ; infill
;WIDTH:0.335505
G1 X100.862 Y95.572 E0.01238 ; infill
G1 X100.197 Y96.121 E0.02100 ; infill
;WIDTH:0.321029
G1 X99.985 Y96.337 E0.00699 ; infill
G1 X99.805 Y96.609 E0.00753 ; infill
G1 X99.532 Y97.212 E0.01532 ; infill
G1 X99.572 Y97.265 F10800.000 ; move to first infill point
;WIDTH:0.30036
G1 F2400.000
G1 X99.639 Y97.073 E0.00436 ; infill
;WIDTH:0.316499
G1 X99.830 Y96.310 E0.01789 ; infill
G1 X99.680 Y96.484 F10800.000 ; move to first infill point
;WIDTH:0.147797
G1 F2400.000
G1 X99.627 Y97.285 E0.00700 ; infill
;WIDTH:0.122758
G1 X99.609 Y97.360 E0.00052 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.627 Y97.285 E-0.02053 ; wipe and retract
;WIPE_END
G1 E-2.37947 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X98.704 Y100.065 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X98.633 Y99.766 E0.01422 ; perimeter
G1 X98.669 Y99.480 E0.01335 ; perimeter
G1 X98.843 Y99.158 E0.01695 ; perimeter
G1 X99.035 Y99.010 E0.01125 ; perimeter
G1 X99.182 Y98.826 E0.01089 ; perimeter
G1 X99.280 Y98.744 E0.00592 ; perimeter
G1 X99.285 Y98.807 E0.00293 ; perimeter
G1 X99.382 Y98.892 E0.00597 ; perimeter
G1 X99.489 Y99.312 E0.02008 ; perimeter
G1 X99.466 Y99.472 E0.00748 ; perimeter
G1 X99.494 Y99.899 E0.01979 ; perimeter
G1 X99.434 Y100.170 E0.01289 ; perimeter
G1 X99.452 Y100.253 E0.00392 ; perimeter
G1 X99.306 Y100.655 E0.01979 ; perimeter
G1 X99.238 Y100.653 E0.00312 ; perimeter
G1 X99.170 Y100.588 E0.00436 ; perimeter
G1 X98.976 Y100.397 E0.01263 ; perimeter
G1 X98.737 Y100.114 E0.01713 ; perimeter
G1 X98.889 Y99.820 F10800.000 ; move inwards before travel
G1 X98.933 Y99.973 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.369729
G1 F2400.000
G1 X99.080 Y99.898 E0.00448 ; infill
;WIDTH:0.383525
G1 X99.080 Y99.867 E0.00088 ; infill
;WIDTH:0.404604
G1 X99.061 Y99.743 E0.00377 ; infill
G1 X99.075 Y99.280 E0.01395 ; infill
G1 X99.182 Y99.201 F10800.000 ; move to first infill point
;WIDTH:0.289458
G1 F2400.000
G1 X98.951 Y99.999 E0.01703 ; infill
G1 X99.180 Y100.234 F10800.000 ; move to first infill point
;WIDTH:0.114902
G1 F2400.000
G1 X99.152 Y100.177 E0.00038 ; infill
;WIDTH:0.127386
G1 X98.916 Y99.530 E0.00484 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.152 Y100.177 E-0.18174 ; wipe and retract
;WIPE_END
G1 E-2.21826 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X100.377 Y103.501 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.386 Y103.585 E0.00392 ; perimeter
G1 X100.292 Y103.631 E0.00486 ; perimeter
G1 X100.087 Y103.499 E0.01132 ; perimeter
G1 X100.020 Y103.486 E0.00314 ; perimeter
G1 X99.846 Y103.356 E0.01005 ; perimeter
G1 X99.702 Y103.205 E0.00971 ; perimeter
G1 X99.634 Y103.091 E0.00610 ; perimeter
G1 X99.507 Y102.742 E0.01723 ; perimeter
G1 X99.498 Y102.590 E0.00704 ; perimeter
G1 X99.560 Y102.290 E0.01422 ; perimeter
G1 X99.688 Y102.082 E0.01131 ; perimeter
G1 X99.757 Y102.041 E0.00372 ; perimeter
G1 X99.820 Y102.060 E0.00304 ; perimeter
G1 X100.045 Y102.199 E0.01227 ; perimeter
G1 X100.194 Y102.373 E0.01061 ; perimeter
G1 X100.287 Y102.539 E0.00882 ; perimeter
G1 X100.381 Y103.012 E0.02236 ; perimeter
G1 X100.365 Y103.102 E0.00420 ; perimeter
G1 X100.376 Y103.441 E0.01575 ; perimeter
G1 X100.307 Y103.548 F10800.000 ; move inwards before travel
G1 X100.107 Y103.250 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.212556
G1 F2400.000
G1 X99.995 Y102.982 E0.00409 ; infill
;WIDTH:0.307975
G1 X99.888 Y102.618 E0.00836 ; infill
G1 X99.848 Y102.361 E0.00574 ; infill
G1 X99.806 Y102.348 F10800.000 ; move to first infill point
;WIDTH:0.147682
G1 F2400.000
G1 X99.964 Y102.716 E0.00349 ; infill
;WIDTH:0.174498
G1 X100.123 Y103.085 E0.00439 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.964 Y102.716 E-0.10584 ; wipe and retract
;WIPE_END
G1 E-2.29416 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X101.303 Y104.976 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.506 Y105.073 E0.01040 ; perimeter
G1 X101.696 Y105.273 E0.01279 ; perimeter
G1 X101.831 Y105.511 E0.01267 ; perimeter
G1 X101.949 Y105.847 E0.01650 ; perimeter
G1 X101.976 Y106.117 E0.01259 ; perimeter
G1 X101.857 Y106.357 E0.01236 ; perimeter
G1 X101.810 Y106.386 E0.00256 ; perimeter
G1 X101.485 Y106.453 E0.01538 ; perimeter
G1 X101.333 Y106.405 E0.00739 ; perimeter
G1 X101.277 Y106.330 E0.00435 ; perimeter
G1 X101.186 Y106.261 E0.00527 ; perimeter
G1 X101.131 Y106.064 E0.00945 ; perimeter
G1 X101.143 Y105.880 E0.00858 ; perimeter
G1 X101.107 Y105.631 E0.01165 ; perimeter
G1 X101.195 Y105.120 E0.02399 ; perimeter
G1 X101.267 Y105.024 E0.00557 ; perimeter
G1 X101.440 Y105.155 F10800.000 ; move inwards before travel
G1 X101.423 Y105.336 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.203229
G1 F2400.000
G1 X101.555 Y106.192 E0.01155 ; infill
G1 X101.598 Y106.184 F10800.000 ; move to first infill point
;WIDTH:0.353822
G1 F2400.000
G1 X101.534 Y105.848 E0.00883 ; infill
;WIDTH:0.344306
G1 X101.489 Y105.666 E0.00471 ; infill
;WIDTH:0.308068
G1 X101.388 Y105.369 E0.00691 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.489 Y105.666 E-0.08267 ; wipe and retract
;WIPE_END
G1 E-2.31733 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X103.623 Y108.269 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.682 Y108.125 E0.00721 ; perimeter
G1 X103.763 Y108.076 E0.00435 ; perimeter
G1 X104.163 Y108.009 E0.01883 ; perimeter
G1 X104.508 Y108.127 E0.01688 ; perimeter
G1 X104.846 Y108.312 E0.01784 ; perimeter
G1 X105.281 Y108.596 E0.02409 ; perimeter
G1 X106.150 Y109.118 E0.04695 ; perimeter
G1 X107.177 Y109.652 E0.05360 ; perimeter
G1 X107.460 Y109.757 E0.01398 ; perimeter
G1 X107.700 Y109.888 E0.01266 ; perimeter
G1 X108.010 Y110.016 E0.01557 ; perimeter
G1 X108.122 Y110.107 E0.00666 ; perimeter
G1 X108.248 Y110.342 E0.01232 ; perimeter
G1 X108.259 Y110.439 E0.00453 ; perimeter
G1 X108.213 Y110.557 E0.00587 ; perimeter
G1 X108.049 Y110.721 E0.01073 ; perimeter
G1 X107.925 Y110.768 E0.00613 ; perimeter
G1 X107.806 Y110.775 E0.00552 ; perimeter
G1 X107.578 Y110.711 E0.01100 ; perimeter
G1 X107.263 Y110.540 E0.01658 ; perimeter
G1 X106.264 Y109.909 E0.05476 ; perimeter
G1 X104.993 Y109.211 E0.06719 ; perimeter
G1 X104.195 Y108.882 E0.03997 ; perimeter
G1 X103.835 Y108.665 E0.01946 ; perimeter
G1 X103.677 Y108.462 E0.01191 ; perimeter
G1 X103.639 Y108.327 E0.00652 ; perimeter
G1 X103.765 Y108.204 F10800.000 ; move inwards before travel
G1 X103.900 Y108.356 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29206
G1 F2400.000
G1 X104.128 Y108.399 E0.00481 ; infill
G1 X105.098 Y108.885 E0.02247 ; infill
;WIDTH:0.198709
G1 X105.996 Y109.398 E0.01340 ; infill
;WIDTH:0.209972
G1 X106.431 Y109.630 E0.00685 ; infill
;WIDTH:0.238882
G1 X106.729 Y109.802 E0.00560 ; infill
;WIDTH:0.269841
G1 X107.039 Y109.979 E0.00675 ; infill
;WIDTH:0.297806
G1 X107.538 Y110.244 E0.01198 ; infill
G1 X107.810 Y110.364 E0.00628 ; infill
G1 X107.842 Y110.390 E0.00088 ; infill
G1 X107.898 Y110.520 E0.00300 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.842 Y110.390 E-0.03733 ; wipe and retract
G1 X107.810 Y110.364 E-0.01098 ; wipe and retract
G1 X107.538 Y110.244 E-0.07823 ; wipe and retract
G1 X107.039 Y109.979 E-0.14915 ; wipe and retract
;WIPE_END
G1 E-2.12430 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X110.163 Y112.804 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.349 Y112.720 E0.00949 ; perimeter
G1 X110.578 Y112.739 E0.01062 ; perimeter
G1 X110.732 Y112.797 E0.00764 ; perimeter
G1 X110.877 Y112.918 E0.00872 ; perimeter
G1 X110.947 Y113.006 E0.00524 ; perimeter
G1 X111.001 Y113.164 E0.00771 ; perimeter
G1 X110.998 Y113.365 E0.00935 ; perimeter
G1 X110.959 Y113.462 E0.00484 ; perimeter
G1 X110.898 Y113.526 E0.00409 ; perimeter
G1 X110.709 Y113.597 E0.00937 ; perimeter
G1 X110.456 Y113.555 E0.01185 ; perimeter
G1 X110.179 Y113.375 E0.01531 ; perimeter
G1 X110.083 Y113.215 E0.00867 ; perimeter
G1 X110.048 Y113.041 E0.00820 ; perimeter
G1 X110.073 Y112.921 E0.00569 ; perimeter
G1 X110.126 Y112.852 E0.00403 ; perimeter
G1 X110.352 Y112.882 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.349 Y112.720 E-0.06845 ; wipe and retract
G1 X110.578 Y112.739 E-0.06048 ; wipe and retract
G1 X110.732 Y112.797 E-0.04350 ; wipe and retract
G1 X110.877 Y112.918 E-0.04966 ; wipe and retract
G1 X110.947 Y113.006 E-0.02983 ; wipe and retract
G1 X111.001 Y113.164 E-0.04392 ; wipe and retract
G1 X110.998 Y113.365 E-0.05325 ; wipe and retract
G1 X110.959 Y113.462 E-0.02757 ; wipe and retract
G1 X110.898 Y113.526 E-0.02329 ; wipe and retract
G1 X110.709 Y113.597 E-0.05336 ; wipe and retract
G1 X110.456 Y113.555 E-0.06752 ; wipe and retract
G1 X110.179 Y113.375 E-0.08723 ; wipe and retract
G1 X110.083 Y113.215 E-0.04939 ; wipe and retract
G1 X110.048 Y113.041 E-0.04670 ; wipe and retract
G1 X110.073 Y112.921 E-0.03241 ; wipe and retract
G1 X110.126 Y112.852 E-0.02294 ; wipe and retract
;WIPE_END
G1 E-1.64049 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X113.928 Y115.780 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.673 Y116.019 E0.01615 ; perimeter
G1 X113.437 Y116.137 E0.01223 ; perimeter
G1 X113.153 Y116.152 E0.01320 ; perimeter
G1 X112.964 Y116.107 E0.00897 ; perimeter
G1 X112.894 Y116.066 E0.00379 ; perimeter
G1 X112.836 Y116.004 E0.00392 ; perimeter
G1 X112.775 Y115.885 E0.00617 ; perimeter
G1 X112.759 Y115.810 E0.00356 ; perimeter
G1 X112.781 Y115.613 E0.00919 ; perimeter
G1 X112.833 Y115.508 E0.00542 ; perimeter
G1 X112.896 Y115.456 E0.00378 ; perimeter
G1 X113.102 Y115.369 E0.01036 ; perimeter
G1 X113.277 Y115.343 E0.00822 ; perimeter
G1 X113.749 Y115.487 E0.02286 ; perimeter
G1 X113.902 Y115.626 E0.00957 ; perimeter
G1 X114.293 Y115.455 E0.01973 ; perimeter
G1 X114.620 Y115.191 E0.01948 ; perimeter
G1 X115.046 Y114.701 E0.03007 ; perimeter
G1 X115.271 Y114.515 E0.01355 ; perimeter
G1 X115.441 Y114.472 E0.00812 ; perimeter
G1 X115.579 Y114.504 E0.00655 ; perimeter
G1 X115.668 Y114.549 E0.00462 ; perimeter
G1 X115.779 Y114.670 E0.00759 ; perimeter
G1 X115.824 Y114.807 E0.00672 ; perimeter
G1 X115.827 Y114.947 E0.00646 ; perimeter
G1 X115.755 Y115.144 E0.00972 ; perimeter
G1 X115.194 Y115.815 E0.04051 ; perimeter
G1 X115.078 Y115.907 E0.00686 ; perimeter
G1 X114.934 Y115.964 E0.00718 ; perimeter
G1 X114.760 Y115.974 E0.00805 ; perimeter
G1 X114.549 Y115.931 E0.01000 ; perimeter
G1 X114.352 Y115.850 E0.00985 ; perimeter
G1 X114.140 Y115.868 E0.00988 ; perimeter
G1 X113.983 Y115.803 E0.00783 ; perimeter
G1 X113.640 Y115.583 F10800.000 ; move inwards before travel
G1 X114.600 Y115.691 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.4028
G1 F2400.000
G1 X114.897 Y115.510 E0.01042 ; infill
G1 X115.336 Y114.999 E0.02017 ; infill
;WIDTH:0.30503
G1 X115.416 Y114.919 E0.00246 ; infill
G1 X115.448 Y114.855 E0.00156 ; infill
G1 X115.549 Y114.768 E0.00292 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.448 Y114.855 E-0.03535 ; wipe and retract
G1 X115.416 Y114.919 E-0.01893 ; wipe and retract
G1 X115.336 Y114.999 E-0.02974 ; wipe and retract
;WIPE_END
G1 E-2.31598 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 X115.285 Y112.144 ; move to first perimeter point
G1 Z18.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.154 Y111.947 E0.01096 ; perimeter
G1 X115.132 Y111.782 E0.00771 ; perimeter
G1 X115.167 Y111.605 E0.00838 ; perimeter
G1 X115.260 Y111.458 E0.00805 ; perimeter
G1 X115.426 Y111.381 E0.00849 ; perimeter
G1 X115.535 Y111.369 E0.00508 ; perimeter
G1 X115.675 Y111.407 E0.00668 ; perimeter
G1 X115.843 Y111.557 E0.01045 ; perimeter
G1 X115.884 Y111.661 E0.00518 ; perimeter
G1 X115.888 Y111.916 E0.01177 ; perimeter
G1 X115.808 Y112.091 E0.00894 ; perimeter
G1 X115.734 Y112.159 E0.00466 ; perimeter
G1 X115.540 Y112.221 E0.00941 ; perimeter
G1 X115.442 Y112.214 E0.00456 ; perimeter
G1 X115.340 Y112.168 E0.00516 ; perimeter
G1 X115.339 Y111.914 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:18.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;18.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.154 Y111.947 E-0.07628 ; wipe and retract
G1 X115.132 Y111.782 E-0.04394 ; wipe and retract
G1 X115.167 Y111.605 E-0.04773 ; wipe and retract
G1 X115.260 Y111.458 E-0.04589 ; wipe and retract
G1 X115.426 Y111.381 E-0.04835 ; wipe and retract
G1 X115.535 Y111.369 E-0.02895 ; wipe and retract
G1 X115.675 Y111.407 E-0.03806 ; wipe and retract
G1 X115.843 Y111.557 E-0.05955 ; wipe and retract
G1 X115.884 Y111.661 E-0.02950 ; wipe and retract
G1 X115.888 Y111.916 E-0.06706 ; wipe and retract
G1 X115.808 Y112.091 E-0.05092 ; wipe and retract
G1 X115.734 Y112.159 E-0.02654 ; wipe and retract
G1 X115.540 Y112.221 E-0.05358 ; wipe and retract
G1 X115.442 Y112.214 E-0.02600 ; wipe and retract
G1 X115.340 Y112.168 E-0.02940 ; wipe and retract
;WIPE_END
G1 E-1.72825 F2400.000 ; retract
G1 Z18.275 F10800.000 ; lift Z
G1 Z18.400 ; move to next layer (91)
;AFTER_LAYER_CHANGE
;18.4
G1 Z18.475 ; lift Z
G1 X101.811 Y106.548 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.541 Y106.525 E0.01255 ; perimeter
G1 X101.477 Y106.477 E0.00372 ; perimeter
G1 X101.271 Y106.424 E0.00986 ; perimeter
G1 X101.154 Y106.277 E0.00870 ; perimeter
G1 X101.091 Y106.069 E0.01008 ; perimeter
G1 X101.110 Y105.819 E0.01161 ; perimeter
G1 X101.207 Y105.657 E0.00873 ; perimeter
G1 X101.273 Y105.413 E0.01172 ; perimeter
G1 X101.373 Y105.344 E0.00563 ; perimeter
G1 X101.558 Y105.337 E0.00856 ; perimeter
G1 X101.630 Y105.412 E0.00482 ; perimeter
G1 X101.747 Y105.491 E0.00654 ; perimeter
G1 X101.819 Y105.622 E0.00694 ; perimeter
G1 X101.865 Y105.783 E0.00775 ; perimeter
G1 X101.930 Y105.908 E0.00652 ; perimeter
G1 X101.949 Y106.118 E0.00976 ; perimeter
G1 X101.913 Y106.204 E0.00433 ; perimeter
G1 X101.922 Y106.351 E0.00679 ; perimeter
G1 X101.840 Y106.496 E0.00770 ; perimeter
G1 X101.600 Y106.379 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.541 Y106.525 E-0.07924 ; wipe and retract
G1 X101.477 Y106.477 E-0.02121 ; wipe and retract
G1 X101.271 Y106.424 E-0.05616 ; wipe and retract
G1 X101.154 Y106.277 E-0.04955 ; wipe and retract
G1 X101.091 Y106.069 E-0.05745 ; wipe and retract
G1 X101.110 Y105.819 E-0.06612 ; wipe and retract
G1 X101.207 Y105.657 E-0.04974 ; wipe and retract
G1 X101.273 Y105.413 E-0.06676 ; wipe and retract
G1 X101.373 Y105.344 E-0.03208 ; wipe and retract
G1 X101.558 Y105.337 E-0.04875 ; wipe and retract
G1 X101.630 Y105.412 E-0.02746 ; wipe and retract
G1 X101.747 Y105.491 E-0.03728 ; wipe and retract
G1 X101.819 Y105.622 E-0.03955 ; wipe and retract
G1 X101.865 Y105.783 E-0.04416 ; wipe and retract
G1 X101.930 Y105.908 E-0.03716 ; wipe and retract
G1 X101.949 Y106.118 E-0.05562 ; wipe and retract
G1 X101.913 Y106.204 E-0.02468 ; wipe and retract
G1 X101.922 Y106.351 E-0.03870 ; wipe and retract
G1 X101.840 Y106.496 E-0.04388 ; wipe and retract
;WIPE_END
G1 E-1.52444 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X108.345 Y110.478 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.298 Y110.626 E0.00720 ; perimeter
G1 X108.163 Y110.761 E0.00887 ; perimeter
G1 X108.028 Y110.809 E0.00663 ; perimeter
G1 X107.878 Y110.815 E0.00693 ; perimeter
G1 X107.645 Y110.744 E0.01129 ; perimeter
G1 X107.425 Y110.618 E0.01175 ; perimeter
G1 X107.151 Y110.394 E0.01640 ; perimeter
G1 X107.027 Y110.233 E0.00942 ; perimeter
G1 X106.561 Y109.900 E0.02654 ; perimeter
G1 X106.178 Y109.710 E0.01976 ; perimeter
G1 X105.437 Y109.272 E0.03990 ; perimeter
G1 X104.978 Y109.023 E0.02418 ; perimeter
G1 X104.690 Y108.999 E0.01337 ; perimeter
G1 X104.547 Y108.948 E0.00705 ; perimeter
G1 X104.303 Y108.899 E0.01153 ; perimeter
G1 X103.966 Y108.766 E0.01678 ; perimeter
G1 X103.714 Y108.614 E0.01365 ; perimeter
G1 X103.474 Y108.378 E0.01557 ; perimeter
G1 X103.416 Y108.284 E0.00511 ; perimeter
G1 X103.320 Y107.965 E0.01543 ; perimeter
G1 X103.422 Y107.927 E0.00508 ; perimeter
G1 X103.635 Y107.937 E0.00985 ; perimeter
G1 X103.746 Y107.919 E0.00523 ; perimeter
G1 X104.043 Y107.981 E0.01405 ; perimeter
G1 X104.092 Y107.975 E0.00228 ; perimeter
G1 X104.343 Y108.065 E0.01233 ; perimeter
G1 X104.847 Y108.373 E0.02736 ; perimeter
G1 X105.057 Y108.587 E0.01390 ; perimeter
G1 X105.441 Y108.863 E0.02188 ; perimeter
G1 X106.549 Y109.519 E0.05970 ; perimeter
G1 X107.290 Y109.834 E0.03727 ; perimeter
G1 X107.729 Y109.913 E0.02065 ; perimeter
G1 X108.118 Y110.071 E0.01946 ; perimeter
G1 X108.242 Y110.199 E0.00827 ; perimeter
G1 X108.335 Y110.419 E0.01105 ; perimeter
G1 X108.208 Y110.551 F10800.000 ; move inwards before travel
G1 X108.085 Y110.498 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.289087
G1 F2400.000
G1 X107.679 Y110.311 E0.00916 ; infill
G1 X107.243 Y110.070 E0.01018 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.679 Y110.311 E-0.13126 ; wipe and retract
G1 X108.085 Y110.498 E-0.11810 ; wipe and retract
;WIPE_END
G1 E-2.15064 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X104.867 Y108.772 ; move to first infill point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.220328
G1 F2400.000
G1 X104.636 Y108.630 E0.00399 ; infill
G1 X104.409 Y108.539 E0.00361 ; infill
;WIDTH:0.350073
G1 X104.048 Y108.367 E0.01020 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.409 Y108.539 E-0.10536 ; wipe and retract
;WIPE_END
G1 E-2.29464 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X110.250 Y112.884 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.470 Y112.785 E0.01114 ; perimeter
G1 X110.657 Y112.803 E0.00872 ; perimeter
G1 X110.842 Y112.880 E0.00927 ; perimeter
G1 X111.028 Y113.052 E0.01173 ; perimeter
G1 X111.087 Y113.193 E0.00707 ; perimeter
G1 X111.102 Y113.388 E0.00907 ; perimeter
G1 X111.054 Y113.532 E0.00701 ; perimeter
G1 X110.995 Y113.593 E0.00392 ; perimeter
G1 X110.817 Y113.666 E0.00895 ; perimeter
G1 X110.559 Y113.630 E0.01205 ; perimeter
G1 X110.263 Y113.417 E0.01689 ; perimeter
G1 X110.161 Y113.222 E0.01022 ; perimeter
G1 X110.143 Y113.112 E0.00515 ; perimeter
G1 X110.160 Y113.018 E0.00444 ; perimeter
G1 X110.217 Y112.934 E0.00470 ; perimeter
G1 X110.473 Y112.975 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.470 Y112.785 E-0.07743 ; wipe and retract
G1 X110.657 Y112.803 E-0.04968 ; wipe and retract
G1 X110.842 Y112.880 E-0.05281 ; wipe and retract
G1 X111.028 Y113.052 E-0.06682 ; wipe and retract
G1 X111.087 Y113.193 E-0.04029 ; wipe and retract
G1 X111.102 Y113.388 E-0.05167 ; wipe and retract
G1 X111.054 Y113.532 E-0.03993 ; wipe and retract
G1 X110.995 Y113.593 E-0.02231 ; wipe and retract
G1 X110.817 Y113.666 E-0.05100 ; wipe and retract
G1 X110.559 Y113.630 E-0.06865 ; wipe and retract
G1 X110.263 Y113.417 E-0.09623 ; wipe and retract
G1 X110.161 Y113.222 E-0.05821 ; wipe and retract
G1 X110.143 Y113.112 E-0.02933 ; wipe and retract
G1 X110.160 Y113.018 E-0.02527 ; wipe and retract
G1 X110.217 Y112.934 E-0.02675 ; wipe and retract
;WIPE_END
G1 E-1.64363 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X112.918 Y115.518 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.997 Y115.452 E0.00476 ; perimeter
G1 X113.209 Y115.363 E0.01064 ; perimeter
G1 X113.412 Y115.334 E0.00949 ; perimeter
G1 X113.942 Y115.479 E0.02547 ; perimeter
G1 X114.297 Y115.398 E0.01687 ; perimeter
G1 X114.700 Y115.102 E0.02318 ; perimeter
G1 X115.040 Y114.708 E0.02407 ; perimeter
G1 X115.290 Y114.507 E0.01488 ; perimeter
G1 X115.454 Y114.478 E0.00774 ; perimeter
G1 X115.663 Y114.555 E0.01032 ; perimeter
G1 X115.777 Y114.680 E0.00783 ; perimeter
G1 X115.820 Y114.821 E0.00682 ; perimeter
G1 X115.824 Y114.949 E0.00596 ; perimeter
G1 X115.760 Y115.137 E0.00916 ; perimeter
G1 X115.204 Y115.810 E0.04045 ; perimeter
G1 X115.079 Y115.910 E0.00742 ; perimeter
G1 X114.925 Y115.971 E0.00767 ; perimeter
G1 X114.757 Y115.985 E0.00781 ; perimeter
G1 X114.403 Y115.912 E0.01673 ; perimeter
G1 X113.932 Y115.959 E0.02192 ; perimeter
G1 X113.550 Y116.131 E0.01942 ; perimeter
G1 X113.262 Y116.146 E0.01334 ; perimeter
G1 X113.050 Y116.102 E0.01004 ; perimeter
G1 X112.930 Y116.006 E0.00713 ; perimeter
G1 X112.876 Y115.897 E0.00561 ; perimeter
G1 X112.851 Y115.772 E0.00592 ; perimeter
G1 X112.894 Y115.573 E0.00945 ; perimeter
G1 X113.021 Y115.528 F10800.000 ; move inwards before travel
G1 X113.102 Y115.796 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.358421
G1 F2400.000
G1 X113.387 Y115.740 E0.00761 ; infill
G1 X113.745 Y115.779 E0.00947 ; infill
G1 X114.479 Y115.682 F10800.000 ; move to first infill point
;WIDTH:0.422982
G1 F2400.000
G1 X114.820 Y115.549 E0.01155 ; infill
;WIDTH:0.431718
G1 X114.973 Y115.426 E0.00633 ; infill
;WIDTH:0.337714
G1 X115.414 Y114.921 E0.01644 ; infill
G1 X115.439 Y114.865 E0.00151 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.414 Y114.921 E-0.01620 ; wipe and retract
G1 X114.973 Y115.426 E-0.17696 ; wipe and retract
;WIPE_END
G1 E-2.20684 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X115.262 Y112.080 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.166 Y111.938 E0.00791 ; perimeter
G1 X115.133 Y111.758 E0.00849 ; perimeter
G1 X115.186 Y111.515 E0.01151 ; perimeter
G1 X115.266 Y111.403 E0.00638 ; perimeter
G1 X115.328 Y111.359 E0.00352 ; perimeter
G1 X115.538 Y111.319 E0.00989 ; perimeter
G1 X115.652 Y111.345 E0.00542 ; perimeter
G1 X115.842 Y111.499 E0.01134 ; perimeter
G1 X115.880 Y111.587 E0.00442 ; perimeter
G1 X115.888 Y111.868 E0.01302 ; perimeter
G1 X115.833 Y112.007 E0.00692 ; perimeter
G1 X115.727 Y112.113 E0.00696 ; perimeter
G1 X115.578 Y112.166 E0.00729 ; perimeter
G1 X115.459 Y112.163 E0.00554 ; perimeter
G1 X115.311 Y112.113 E0.00721 ; perimeter
G1 X115.298 Y111.913 F10800.000 ; move inwards before travel
G1 X115.510 Y111.674 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288629
G1 F2400.000
G1 X115.521 Y111.799 E0.00258 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y111.674 E-0.03327 ; wipe and retract
;WIPE_END
G1 E-2.36673 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X115.551 Y105.782 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.409 Y105.774 E0.00662 ; perimeter
G1 X115.293 Y105.723 E0.00588 ; perimeter
G1 X115.251 Y105.684 E0.00264 ; perimeter
G1 X115.147 Y105.437 E0.01239 ; perimeter
G1 X115.111 Y105.062 E0.01748 ; perimeter
G1 X115.176 Y104.874 E0.00921 ; perimeter
G1 X115.098 Y104.468 E0.01914 ; perimeter
G1 X114.795 Y103.752 E0.03601 ; perimeter
G1 X114.727 Y103.492 E0.01246 ; perimeter
G1 X114.700 Y103.031 E0.02138 ; perimeter
G1 X114.742 Y102.828 E0.00960 ; perimeter
G1 X114.737 Y102.768 E0.00279 ; perimeter
G1 X114.801 Y102.572 E0.00956 ; perimeter
G1 X114.876 Y102.494 E0.00504 ; perimeter
G1 X114.977 Y102.514 E0.00475 ; perimeter
G1 X115.110 Y102.608 E0.00755 ; perimeter
G1 X115.189 Y102.689 E0.00525 ; perimeter
G1 X115.406 Y103.066 E0.02015 ; perimeter
G1 X115.522 Y103.423 E0.01737 ; perimeter
G1 X115.592 Y103.849 E0.02002 ; perimeter
G1 X115.587 Y104.426 E0.02673 ; perimeter
G1 X115.640 Y104.664 E0.01130 ; perimeter
G1 X115.784 Y104.912 E0.01326 ; perimeter
G1 X115.881 Y105.253 E0.01641 ; perimeter
G1 X115.876 Y105.451 E0.00919 ; perimeter
G1 X115.818 Y105.605 E0.00763 ; perimeter
G1 X115.664 Y105.752 E0.00985 ; perimeter
G1 X115.609 Y105.766 E0.00263 ; perimeter
G1 X115.461 Y105.671 F10800.000 ; move inwards before travel
G1 X115.591 Y105.488 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.114212
G1 F2400.000
G1 X115.455 Y104.886 E0.00366 ; infill
;WIDTH:0.103517
G1 X115.438 Y104.842 E0.00023 ; infill
G1 X115.423 Y104.848 F10800.000 ; move to first infill point
;WIDTH:0.242183
G1 F2400.000
G1 X115.507 Y105.300 E0.00762 ; infill
G1 X115.504 Y105.450 E0.00248 ; infill
G1 X115.348 Y104.264 F10800.000 ; move to first infill point
;WIDTH:0.305501
G1 F2400.000
G1 X115.114 Y103.431 E0.01889 ; infill
G1 X115.005 Y102.852 E0.01285 ; infill
G1 X114.492 Y101.042 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.475 Y101.222 E0.00838 ; perimeter
G1 X114.254 Y101.415 E0.01359 ; perimeter
G1 X113.981 Y101.368 E0.01285 ; perimeter
G1 X113.818 Y101.270 E0.00880 ; perimeter
G1 X113.625 Y101.078 E0.01258 ; perimeter
G1 X113.447 Y100.786 E0.01585 ; perimeter
G1 X113.377 Y100.553 E0.01129 ; perimeter
G1 X113.081 Y100.148 E0.02324 ; perimeter
G1 X112.906 Y99.973 E0.01145 ; perimeter
G1 X112.751 Y99.777 E0.01158 ; perimeter
G1 X112.479 Y99.293 E0.02572 ; perimeter
G1 X112.378 Y98.932 E0.01736 ; perimeter
G1 X112.368 Y98.797 E0.00626 ; perimeter
G1 X112.411 Y98.608 E0.00898 ; perimeter
G1 X112.405 Y98.556 E0.00242 ; perimeter
G1 X112.504 Y98.523 E0.00482 ; perimeter
G1 X112.618 Y98.546 E0.00542 ; perimeter
G1 X112.771 Y98.621 E0.00787 ; perimeter
G1 X112.950 Y98.749 E0.01020 ; perimeter
G1 X113.144 Y98.962 E0.01336 ; perimeter
G1 X113.376 Y99.318 E0.01966 ; perimeter
G1 X113.519 Y99.619 E0.01543 ; perimeter
G1 X113.537 Y99.755 E0.00639 ; perimeter
G1 X113.787 Y100.148 E0.02158 ; perimeter
G1 X113.978 Y100.334 E0.01234 ; perimeter
G1 X114.099 Y100.403 E0.00644 ; perimeter
G1 X114.264 Y100.577 E0.01110 ; perimeter
G1 X114.433 Y100.844 E0.01465 ; perimeter
G1 X114.475 Y100.985 E0.00679 ; perimeter
G1 X114.344 Y101.146 F10800.000 ; move inwards before travel
G1 X114.188 Y101.152 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.284318
G1 F2400.000
G1 X113.774 Y100.630 E0.01339 ; infill
;WIDTH:0.276715
G1 X113.757 Y100.605 E0.00058 ; infill
G1 X113.649 Y100.428 F10800.000 ; move to first infill point
;WIDTH:0.153997
G1 F2400.000
G1 X113.569 Y100.333 E0.00115 ; infill
;WIDTH:0.129896
G1 X113.230 Y99.850 E0.00426 ; infill
G1 X113.305 Y100.046 F10800.000 ; move to first infill point
;WIDTH:0.283141
G1 F2400.000
G1 X113.168 Y99.722 E0.00702 ; infill
G1 X112.848 Y99.191 E0.01239 ; infill
G1 X112.613 Y98.864 E0.00804 ; infill
G1 X111.892 Y97.640 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.712 Y97.730 E0.00932 ; perimeter
G1 X111.388 Y97.654 E0.01545 ; perimeter
G1 X111.145 Y97.480 E0.01382 ; perimeter
G1 X111.034 Y97.317 E0.00914 ; perimeter
G1 X110.893 Y97.197 E0.00857 ; perimeter
G1 X110.822 Y97.093 E0.00584 ; perimeter
G1 X110.424 Y96.788 E0.02321 ; perimeter
G1 X110.082 Y96.684 E0.01654 ; perimeter
G1 X109.939 Y96.614 E0.00739 ; perimeter
G1 X109.599 Y96.516 E0.01638 ; perimeter
G1 X109.482 Y96.457 E0.00610 ; perimeter
G1 X108.825 Y96.229 E0.03221 ; perimeter
G1 X108.545 Y96.148 E0.01348 ; perimeter
G1 X108.198 Y95.984 E0.01778 ; perimeter
G1 X108.059 Y95.830 E0.00962 ; perimeter
G1 X108.047 Y95.654 E0.00816 ; perimeter
G1 X108.075 Y95.521 E0.00631 ; perimeter
G1 X108.219 Y95.394 E0.00890 ; perimeter
G1 X108.506 Y95.310 E0.01384 ; perimeter
G1 X108.755 Y95.321 E0.01153 ; perimeter
G1 X109.535 Y95.641 E0.03908 ; perimeter
G1 X110.084 Y95.911 E0.02834 ; perimeter
G1 X110.636 Y96.266 E0.03039 ; perimeter
G1 X111.293 Y96.653 E0.03532 ; perimeter
G1 X111.729 Y96.886 E0.02289 ; perimeter
G1 X111.917 Y97.134 E0.01443 ; perimeter
G1 X111.964 Y97.267 E0.00650 ; perimeter
G1 X111.924 Y97.486 E0.01032 ; perimeter
G1 X111.937 Y97.541 E0.00262 ; perimeter
G1 X111.917 Y97.585 E0.00224 ; perimeter
G1 X111.699 Y97.584 F10800.000 ; move inwards before travel
G1 X111.667 Y97.476 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.29794
G1 F2400.000
G1 X111.566 Y97.308 E0.00416 ; infill
G1 X111.458 Y97.204 E0.00317 ; infill
G1 X110.950 Y96.887 E0.01271 ; infill
G1 X110.792 Y96.638 F10800.000 ; move to first infill point
;WIDTH:0.233136
G1 F2400.000
G1 X111.130 Y96.948 E0.00725 ; infill
;WIDTH:0.24608
G1 X111.150 Y96.966 E0.00046 ; infill
;WIDTH:0.282808
G1 X111.292 Y97.063 E0.00344 ; infill
;WIDTH:0.294382
G1 X111.698 Y97.381 E0.01078 ; infill
G1 X111.696 Y97.390 F10800.000 ; move to first infill point
;WIDTH:0.191861
G1 F2400.000
G1 X111.042 Y96.868 E0.01036 ; infill
G1 X110.800 Y96.705 E0.00362 ; infill
;WIDTH:0.150083
G1 X110.558 Y96.542 E0.00260 ; infill
;WIDTH:0.115621
G1 X110.345 Y96.443 E0.00142 ; infill
;WIDTH:0.217195
G1 X109.906 Y96.227 E0.00709 ; infill
;WIDTH:0.317274
G1 X108.359 Y95.604 E0.03804 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.906 Y96.227 E-0.44000 ; wipe and retract
;WIPE_END
G1 E-1.96000 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X105.421 Y94.561 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.325 Y94.688 E0.00736 ; perimeter
G1 X105.049 Y94.783 E0.01352 ; perimeter
G1 X104.781 Y94.762 E0.01244 ; perimeter
G1 X104.563 Y94.669 E0.01099 ; perimeter
G1 X104.440 Y94.552 E0.00786 ; perimeter
G1 X104.424 Y94.501 E0.00252 ; perimeter
G1 X104.316 Y94.347 E0.00869 ; perimeter
G1 X104.459 Y94.121 E0.01237 ; perimeter
G1 X104.563 Y94.064 E0.00545 ; perimeter
G1 X104.916 Y94.000 E0.01662 ; perimeter
G1 X105.232 Y94.041 E0.01478 ; perimeter
G1 X105.273 Y94.071 E0.00235 ; perimeter
G1 X105.404 Y94.253 E0.01038 ; perimeter
G1 X105.456 Y94.411 E0.00768 ; perimeter
G1 X105.434 Y94.503 E0.00439 ; perimeter
G1 X105.263 Y94.579 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.325 Y94.688 E-0.05675 ; wipe and retract
G1 X105.049 Y94.783 E-0.07700 ; wipe and retract
G1 X104.781 Y94.762 E-0.07089 ; wipe and retract
G1 X104.563 Y94.669 E-0.06261 ; wipe and retract
G1 X104.440 Y94.552 E-0.04476 ; wipe and retract
G1 X104.424 Y94.501 E-0.01436 ; wipe and retract
G1 X104.316 Y94.347 E-0.04950 ; wipe and retract
G1 X104.459 Y94.121 E-0.07050 ; wipe and retract
G1 X104.563 Y94.064 E-0.03106 ; wipe and retract
G1 X104.916 Y94.000 E-0.09470 ; wipe and retract
G1 X105.232 Y94.041 E-0.08421 ; wipe and retract
G1 X105.273 Y94.071 E-0.01339 ; wipe and retract
G1 X105.404 Y94.253 E-0.05911 ; wipe and retract
G1 X105.456 Y94.411 E-0.04377 ; wipe and retract
G1 X105.434 Y94.503 E-0.02503 ; wipe and retract
;WIPE_END
G1 E-1.60236 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X101.794 Y95.463 ; move to first perimeter point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.027 Y96.030 E0.04414 ; perimeter
G1 X100.525 Y96.296 E0.02636 ; perimeter
G1 X100.258 Y96.566 E0.01759 ; perimeter
G1 X100.084 Y96.916 E0.01811 ; perimeter
G1 X99.995 Y97.224 E0.01482 ; perimeter
G1 X99.974 Y97.364 E0.00656 ; perimeter
G1 X99.813 Y97.769 E0.02020 ; perimeter
G1 X99.700 Y97.918 E0.00866 ; perimeter
G1 X99.578 Y98.242 E0.01606 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.576 Y98.247 E0.00021 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.557 Y98.299 E0.00255 ; perimeter
G1 X99.519 Y98.888 E0.02734 ; perimeter
G1 X99.563 Y99.080 E0.00913 ; perimeter
G1 X99.506 Y99.478 E0.01865 ; perimeter
G1 X99.539 Y99.993 E0.02390 ; perimeter
G1 X99.504 Y100.151 E0.00749 ; perimeter
G1 X99.566 Y100.444 E0.01384 ; perimeter
G1 X99.554 Y100.478 E0.00170 ; perimeter
G1 X99.580 Y101.163 E0.03174 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.591 Y101.468 E0.01274 ; perimeter (bridge)
G1 X99.633 Y101.530 E0.00313 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.910 Y101.935 E0.02271 ; perimeter
G1 X100.013 Y101.998 E0.00563 ; perimeter
G1 X100.163 Y102.215 E0.01217 ; perimeter
G1 X100.239 Y102.374 E0.00817 ; perimeter
G1 X100.308 Y102.788 E0.01947 ; perimeter
G1 X100.254 Y103.084 E0.01395 ; perimeter
G1 X100.259 Y103.161 E0.00358 ; perimeter
G1 X100.208 Y103.259 E0.00512 ; perimeter
G1 X100.061 Y103.263 E0.00681 ; perimeter
G1 X99.909 Y103.234 E0.00716 ; perimeter
G1 X99.674 Y103.046 E0.01391 ; perimeter
G1 X99.567 Y102.872 E0.00949 ; perimeter
G1 X99.469 Y102.601 E0.01335 ; perimeter
G1 X99.446 Y102.273 E0.01520 ; perimeter
G1 X99.491 Y102.027 E0.01160 ; perimeter
G1 X99.607 Y101.853 E0.00969 ; perimeter
G1 X99.578 Y101.568 E0.01329 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.548 Y101.266 E0.01267 ; perimeter (bridge)
G1 X99.412 Y101.158 E0.00725 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.381 Y101.134 E0.00181 ; perimeter
G1 X99.322 Y101.013 E0.00622 ; perimeter
G1 X99.175 Y100.875 E0.00936 ; perimeter
G1 X99.026 Y100.606 E0.01426 ; perimeter
G1 X98.909 Y100.467 E0.00841 ; perimeter
G1 X98.741 Y100.147 E0.01672 ; perimeter
G1 X98.655 Y99.812 E0.01602 ; perimeter
G1 X98.700 Y99.396 E0.01942 ; perimeter
G1 X98.764 Y99.189 E0.01002 ; perimeter
G1 X98.839 Y99.059 E0.00695 ; perimeter
G1 X98.908 Y98.982 E0.00479 ; perimeter
G1 X98.964 Y98.850 E0.00664 ; perimeter
G1 X99.087 Y98.684 E0.00958 ; perimeter
G1 X99.339 Y98.172 E0.02644 ; perimeter
G1 X99.321 Y97.819 E0.01635 ; perimeter
G1 X99.264 Y97.516 E0.01427 ; perimeter
G1 X99.258 Y97.274 E0.01121 ; perimeter
G1 X99.237 Y97.221 E0.00263 ; perimeter
G1 X99.313 Y96.816 E0.01911 ; perimeter
G1 X99.431 Y96.595 E0.01162 ; perimeter
G1 X99.485 Y96.452 E0.00705 ; perimeter
G1 X99.603 Y96.302 E0.00887 ; perimeter
G1 X100.388 Y95.448 E0.05370 ; perimeter
G1 X100.669 Y95.218 E0.01683 ; perimeter
G1 X101.335 Y94.942 E0.03341 ; perimeter
G1 X101.675 Y94.741 E0.01828 ; perimeter
G1 X102.005 Y94.498 E0.01900 ; perimeter
G1 X102.319 Y94.321 E0.01670 ; perimeter
G1 X102.693 Y94.255 E0.01757 ; perimeter
G1 X102.950 Y94.313 E0.01223 ; perimeter
G1 X103.071 Y94.389 E0.00660 ; perimeter
G1 X103.120 Y94.506 E0.00590 ; perimeter
G1 X103.064 Y94.586 E0.00452 ; perimeter
G1 X103.028 Y94.771 E0.00872 ; perimeter
G1 X102.872 Y94.942 E0.01075 ; perimeter
G1 X102.391 Y95.251 E0.02649 ; perimeter
G1 X101.997 Y95.437 E0.02018 ; perimeter
G1 X101.853 Y95.455 E0.00670 ; perimeter
G1 X101.444 Y95.268 F10800.000 ; move inwards before travel
G1 X101.688 Y95.131 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.245601
G1 F2400.000
G1 X101.333 Y95.343 E0.00696 ; infill
;WIDTH:0.342854
G1 X100.880 Y95.599 E0.01298 ; infill
G1 X100.447 Y95.924 E0.01350 ; infill
;WIDTH:0.291304
G1 X100.332 Y96.012 E0.00299 ; infill
;WIDTH:0.242417
G1 X99.996 Y96.362 E0.00805 ; infill
;WIDTH:0.223894
G1 X99.811 Y96.636 E0.00497 ; infill
G1 X99.739 Y96.794 E0.00262 ; infill
;WIDTH:0.32595
G1 X99.678 Y96.945 E0.00382 ; infill
G1 X99.633 Y97.136 E0.00462 ; infill
;WIDTH:0.306733
G1 X99.624 Y97.186 E0.00112 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.633 Y97.136 E-0.01352 ; wipe and retract
;WIPE_END
G1 E-2.38648 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X98.958 Y99.378 ; move to first infill point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.285695
G1 F2400.000
G1 X99.151 Y100.173 E0.01652 ; infill
;WIDTH:0.261213
G1 X99.288 Y100.552 E0.00732 ; infill
G1 X99.128 Y100.353 F10800.000 ; move to first infill point
;WIDTH:0.347795
G1 F2400.000
G1 X99.121 Y99.962 E0.00992 ; infill
G1 X99.094 Y99.789 E0.00442 ; infill
G1 X99.102 Y99.460 E0.00835 ; infill
G1 X99.277 Y98.911 E0.01460 ; infill
G1 X99.276 Y98.905 F10800.000 ; move to first infill point
;WIDTH:0.244513
G1 F2400.000
G1 X99.207 Y99.152 E0.00430 ; infill
G1 X98.928 Y99.905 E0.01346 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.207 Y99.152 E-0.21192 ; wipe and retract
G1 X99.276 Y98.905 E-0.06771 ; wipe and retract
;WIPE_END
G1 E-2.12037 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X99.937 Y102.948 ; move to first infill point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.253872
G1 F2400.000
G1 X99.759 Y102.125 E0.01477 ; infill
G1 X99.761 Y102.126 F10800.000 ; move to first infill point
;WIDTH:0.286936
G1 F2400.000
G1 X99.940 Y102.785 E0.01385 ; infill
G1 X99.975 Y102.978 E0.00399 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.940 Y102.785 E-0.05187 ; wipe and retract
G1 X99.761 Y102.126 E-0.18011 ; wipe and retract
;WIPE_END
G1 E-2.16803 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 X101.880 Y95.065 ; move to first infill point
G1 Z18.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.332156
G1 F2400.000
G1 X101.894 Y95.059 E0.00035 ; infill
;WIDTH:0.36536
G1 X102.041 Y94.971 E0.00459 ; infill
;WIDTH:0.402112
G1 X102.783 Y94.522 E0.02593 ; infill
G1 X102.820 Y94.576 F10800.000 ; move to first infill point
;WIDTH:0.271254
G1 F2400.000
G1 X101.929 Y94.854 E0.01774 ; infill
;LAYER_CHANGE
;Z:18.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;18.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.820 Y94.576 E-0.24652 ; wipe and retract
;WIPE_END
G1 E-2.15348 F2400.000 ; retract
G1 Z18.475 F10800.000 ; lift Z
G1 Z18.600 ; move to next layer (92)
;AFTER_LAYER_CHANGE
;18.6
G1 Z18.675 ; lift Z
G1 X108.197 Y95.838 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.196 Y95.761 E0.00355 ; perimeter
G1 X108.264 Y95.498 E0.01261 ; perimeter
G1 X108.438 Y95.340 E0.01088 ; perimeter
G1 X108.647 Y95.284 E0.01001 ; perimeter
G1 X108.793 Y95.291 E0.00678 ; perimeter
G1 X109.264 Y95.486 E0.02362 ; perimeter
G1 X109.440 Y95.603 E0.00978 ; perimeter
G1 X109.702 Y95.735 E0.01361 ; perimeter
G1 X110.178 Y96.082 E0.02725 ; perimeter
G1 X110.373 Y96.340 E0.01501 ; perimeter
G1 X110.841 Y96.607 E0.02497 ; perimeter
G1 X111.395 Y96.789 E0.02701 ; perimeter
G1 X111.534 Y96.808 E0.00649 ; perimeter
G1 X111.797 Y96.953 E0.01391 ; perimeter
G1 X111.961 Y97.151 E0.01189 ; perimeter
G1 X112.022 Y97.312 E0.00799 ; perimeter
G1 X112.008 Y97.385 E0.00342 ; perimeter
G1 X112.092 Y97.690 E0.01467 ; perimeter
G1 X112.180 Y97.823 E0.00737 ; perimeter
G1 X112.165 Y97.896 E0.00347 ; perimeter
G1 X112.412 Y98.247 E0.01987 ; perimeter
G1 X112.553 Y98.290 E0.00683 ; perimeter
G1 X112.684 Y98.391 E0.00766 ; perimeter
G1 X113.041 Y98.765 E0.02397 ; perimeter
G1 X113.257 Y99.119 E0.01916 ; perimeter
G1 X113.369 Y99.392 E0.01369 ; perimeter
G1 X113.401 Y99.539 E0.00698 ; perimeter
G1 X113.426 Y99.877 E0.01571 ; perimeter
G1 X113.517 Y100.016 E0.00765 ; perimeter
G1 X113.633 Y100.292 E0.01389 ; perimeter
G1 X113.913 Y100.385 E0.01367 ; perimeter
G1 X114.267 Y100.602 E0.01922 ; perimeter
G1 X114.553 Y100.971 E0.02162 ; perimeter
G1 X114.633 Y101.237 E0.01287 ; perimeter
G1 X114.587 Y101.668 E0.02009 ; perimeter
G1 X114.643 Y101.802 E0.00671 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.697 Y101.919 E0.00541 ; perimeter (bridge)
G1 X114.595 Y101.864 E0.00485 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.506 Y101.817 E0.00464 ; perimeter
G1 X114.452 Y101.648 E0.00821 ; perimeter
G1 X114.068 Y101.510 E0.01888 ; perimeter
G1 X113.960 Y101.427 E0.00632 ; perimeter
G1 X113.755 Y101.218 E0.01356 ; perimeter
G1 X113.628 Y101.007 E0.01140 ; perimeter
G1 X113.471 Y100.483 E0.02536 ; perimeter
G1 X113.414 Y100.409 E0.00430 ; perimeter
G1 X113.285 Y100.082 E0.01632 ; perimeter
G1 X113.066 Y99.980 E0.01117 ; perimeter
G1 X112.949 Y99.857 E0.00787 ; perimeter
G1 X112.834 Y99.786 E0.00628 ; perimeter
G1 X112.571 Y99.475 E0.01885 ; perimeter
G1 X112.324 Y99.045 E0.02298 ; perimeter
G1 X112.279 Y98.864 E0.00864 ; perimeter
G1 X112.210 Y98.692 E0.00856 ; perimeter
G1 X112.193 Y98.522 E0.00795 ; perimeter
G1 X112.130 Y98.325 E0.00956 ; perimeter
G1 X112.219 Y97.976 E0.01665 ; perimeter
G1 X111.845 Y97.894 E0.01773 ; perimeter
G1 X111.560 Y97.760 E0.01462 ; perimeter
G1 X111.248 Y97.551 E0.01738 ; perimeter
G1 X110.900 Y97.022 E0.02932 ; perimeter
G1 X110.666 Y96.742 E0.01689 ; perimeter
G1 X110.377 Y96.584 E0.01526 ; perimeter
G1 X110.022 Y96.500 E0.01690 ; perimeter
G1 X109.735 Y96.473 E0.01334 ; perimeter
G1 X109.476 Y96.401 E0.01248 ; perimeter
G1 X109.194 Y96.294 E0.01396 ; perimeter
G1 X108.727 Y96.180 E0.02226 ; perimeter
G1 X108.371 Y96.015 E0.01821 ; perimeter
G1 X108.239 Y95.881 E0.00870 ; perimeter
G1 X108.247 Y95.780 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.196 Y95.761 E-0.03351 ; wipe and retract
G1 X108.264 Y95.498 E-0.07186 ; wipe and retract
G1 X108.438 Y95.340 E-0.06197 ; wipe and retract
G1 X108.647 Y95.284 E-0.05704 ; wipe and retract
G1 X108.793 Y95.291 E-0.03860 ; wipe and retract
G1 X109.264 Y95.486 E-0.13458 ; wipe and retract
G1 X109.440 Y95.603 E-0.05569 ; wipe and retract
G1 X109.702 Y95.735 E-0.07753 ; wipe and retract
G1 X110.178 Y96.082 E-0.15524 ; wipe and retract
G1 X110.373 Y96.340 E-0.08551 ; wipe and retract
G1 X110.841 Y96.607 E-0.14228 ; wipe and retract
G1 X111.395 Y96.789 E-0.15389 ; wipe and retract
G1 X111.534 Y96.808 E-0.03699 ; wipe and retract
G1 X111.797 Y96.953 E-0.07925 ; wipe and retract
G1 X111.961 Y97.151 E-0.06775 ; wipe and retract
G1 X112.022 Y97.312 E-0.04550 ; wipe and retract
G1 X112.008 Y97.385 E-0.01946 ; wipe and retract
G1 X112.092 Y97.690 E-0.08359 ; wipe and retract
G1 X112.180 Y97.823 E-0.04201 ; wipe and retract
G1 X112.165 Y97.896 E-0.01974 ; wipe and retract
G1 X112.412 Y98.247 E-0.11317 ; wipe and retract
G1 X112.553 Y98.290 E-0.03891 ; wipe and retract
G1 X112.684 Y98.391 E-0.04361 ; wipe and retract
G1 X113.041 Y98.765 E-0.13653 ; wipe and retract
G1 X113.257 Y99.119 E-0.10917 ; wipe and retract
G1 X113.369 Y99.392 E-0.07801 ; wipe and retract
G1 X113.401 Y99.539 E-0.03975 ; wipe and retract
G1 X113.426 Y99.877 E-0.08952 ; wipe and retract
G1 X113.517 Y100.016 E-0.04359 ; wipe and retract
G1 X113.633 Y100.292 E-0.07914 ; wipe and retract
G1 X113.801 Y100.348 E-0.04661 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X115.362 Y104.611 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.199 Y104.228 E0.01927 ; perimeter
G1 X115.051 Y104.072 E0.00994 ; perimeter
G1 X114.865 Y103.776 E0.01621 ; perimeter
G1 X114.744 Y103.510 E0.01353 ; perimeter
G1 X114.663 Y103.243 E0.01292 ; perimeter
G1 X114.623 Y102.904 E0.01582 ; perimeter
G1 X114.643 Y102.823 E0.00388 ; perimeter
G1 X114.624 Y102.604 E0.01016 ; perimeter
G1 X114.694 Y102.372 E0.01123 ; perimeter
G1 X114.632 Y102.195 E0.00869 ; perimeter
G1 X114.695 Y101.958 E0.01137 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.703 Y101.927 E0.00131 ; perimeter (bridge)
G1 X114.714 Y101.942 E0.00076 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.916 Y102.209 E0.01553 ; perimeter
G1 X115.095 Y102.348 E0.01049 ; perimeter
G1 X115.223 Y102.541 E0.01071 ; perimeter
G1 X115.354 Y102.805 E0.01368 ; perimeter
G1 X115.451 Y103.135 E0.01593 ; perimeter
G1 X115.518 Y103.621 E0.02271 ; perimeter
G1 X115.457 Y104.115 E0.02306 ; perimeter
G1 X115.374 Y104.275 E0.00838 ; perimeter
G1 X115.498 Y104.814 E0.02563 ; perimeter
G1 X115.642 Y104.888 E0.00749 ; perimeter
G1 X115.750 Y105.058 E0.00931 ; perimeter
G1 X115.818 Y105.131 E0.00464 ; perimeter
G1 X115.877 Y105.319 E0.00916 ; perimeter
G1 X115.872 Y105.514 E0.00901 ; perimeter
G1 X115.805 Y105.693 E0.00886 ; perimeter
G1 X115.674 Y105.817 E0.00834 ; perimeter
G1 X115.554 Y105.850 E0.00576 ; perimeter
G1 X115.418 Y105.845 E0.00632 ; perimeter
G1 X115.297 Y105.794 E0.00608 ; perimeter
G1 X115.252 Y105.752 E0.00284 ; perimeter
G1 X115.149 Y105.499 E0.01267 ; perimeter
G1 X115.129 Y105.214 E0.01322 ; perimeter
G1 X115.183 Y105.062 E0.00744 ; perimeter
G1 X115.250 Y104.972 E0.00524 ; perimeter
G1 X115.344 Y104.668 E0.01473 ; perimeter
G1 X115.677 Y104.363 F10800.000 ; move inwards before travel
G1 X115.456 Y105.099 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.242591
G1 F2400.000
G1 X115.474 Y105.260 E0.00270 ; infill
;WIDTH:0.254192
G1 X115.481 Y105.279 E0.00035 ; infill
;WIDTH:0.28312
G1 X115.499 Y105.318 E0.00086 ; infill
;WIDTH:0.291416
G1 X115.544 Y105.603 E0.00595 ; infill
G1 X115.251 Y103.820 F10800.000 ; move to first infill point
;WIDTH:0.251762
G1 F2400.000
G1 X115.101 Y103.375 E0.00816 ; infill
;WIDTH:0.346802
G1 X115.004 Y102.942 E0.01121 ; infill
;WIDTH:0.309789
G1 X114.890 Y102.557 E0.00891 ; infill
G1 X114.361 Y101.359 F10800.000 ; move to first infill point
;WIDTH:0.314322
G1 F2400.000
G1 X114.213 Y101.146 E0.00584 ; infill
G1 X114.065 Y100.978 E0.00505 ; infill
G1 X113.823 Y100.626 E0.00963 ; infill
G1 X113.147 Y99.714 F10800.000 ; move to first infill point
;WIDTH:0.25018
G1 F2400.000
G1 X113.039 Y99.494 E0.00422 ; infill
G1 X112.737 Y98.999 E0.01000 ; infill
G1 X112.443 Y98.606 E0.00845 ; infill
G1 X111.757 Y97.586 F10800.000 ; move to first infill point
;WIDTH:0.267032
G1 F2400.000
G1 X111.626 Y97.345 E0.00511 ; infill
G1 X111.538 Y97.265 E0.00222 ; infill
G1 X111.222 Y97.073 E0.00690 ; infill
G1 X111.188 Y97.001 F10800.000 ; move to first infill point
;WIDTH:0.194844
G1 F2400.000
G1 X111.763 Y97.400 E0.00884 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.188 Y97.001 E-0.18469 ; wipe and retract
;WIPE_END
G1 E-2.21531 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X109.934 Y96.244 ; move to first infill point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.207206
G1 F2400.000
G1 X109.296 Y95.941 E0.00965 ; infill
;WIDTH:0.30287
G1 X109.072 Y95.846 E0.00526 ; infill
;WIDTH:0.405857
G1 X108.701 Y95.706 E0.01197 ; infill
G1 X108.473 Y95.651 E0.00706 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.701 Y95.706 E-0.06175 ; wipe and retract
G1 X109.072 Y95.846 E-0.10465 ; wipe and retract
;WIPE_END
G1 E-2.23360 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X105.436 Y94.579 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.345 Y94.708 E0.00732 ; perimeter
G1 X105.129 Y94.780 E0.01054 ; perimeter
G1 X104.848 Y94.769 E0.01307 ; perimeter
G1 X104.638 Y94.743 E0.00980 ; perimeter
G1 X104.227 Y94.550 E0.02100 ; perimeter
G1 X104.086 Y94.436 E0.00840 ; perimeter
G1 X103.813 Y94.432 E0.01265 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.629 Y94.430 E0.00772 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.458 Y94.428 E0.00788 ; perimeter
G1 X103.311 Y94.640 E0.01196 ; perimeter
G1 X103.102 Y94.783 E0.01173 ; perimeter
G1 X102.958 Y94.932 E0.00957 ; perimeter
G1 X102.385 Y95.285 E0.03119 ; perimeter
G1 X101.895 Y95.532 E0.02544 ; perimeter
G1 X101.821 Y95.542 E0.00345 ; perimeter
G1 X101.281 Y95.898 E0.02995 ; perimeter
G1 X100.853 Y96.119 E0.02232 ; perimeter
G1 X100.682 Y96.139 E0.00801 ; perimeter
G1 X100.396 Y96.249 E0.01419 ; perimeter
G1 X100.115 Y96.607 E0.02106 ; perimeter
G1 X100.027 Y96.917 E0.01492 ; perimeter
G1 X100.021 Y97.071 E0.00716 ; perimeter
G1 X99.972 Y97.330 E0.01220 ; perimeter
G1 X99.976 Y97.471 E0.00653 ; perimeter
G1 X99.933 Y97.701 E0.01084 ; perimeter
G1 X99.713 Y98.381 E0.03310 ; perimeter
G1 X99.686 Y98.682 E0.01402 ; perimeter
G1 X99.631 Y98.881 E0.00955 ; perimeter
G1 X99.546 Y99.484 E0.02819 ; perimeter
G1 X99.582 Y100.163 E0.03151 ; perimeter
G1 X99.726 Y101.146 E0.04603 ; perimeter
G1 X99.939 Y101.723 E0.02848 ; perimeter
G1 X100.198 Y102.204 E0.02528 ; perimeter
G1 X100.252 Y102.602 E0.01862 ; perimeter
G1 X100.180 Y102.914 E0.01484 ; perimeter
G1 X100.121 Y102.999 E0.00479 ; perimeter
G1 X100.065 Y103.028 E0.00291 ; perimeter
G1 X99.782 Y102.978 E0.01332 ; perimeter
G1 X99.684 Y102.906 E0.00563 ; perimeter
G1 X99.628 Y102.807 E0.00528 ; perimeter
G1 X99.513 Y102.676 E0.00805 ; perimeter
G1 X99.430 Y102.456 E0.01092 ; perimeter
G1 X99.377 Y101.959 E0.02314 ; perimeter
G1 X99.404 Y101.780 E0.00837 ; perimeter
G1 X99.345 Y101.468 E0.01472 ; perimeter
G1 X99.200 Y101.216 E0.01348 ; perimeter
G1 X99.038 Y100.872 E0.01762 ; perimeter
G1 X98.777 Y100.217 E0.03264 ; perimeter
G1 X98.685 Y99.863 E0.01693 ; perimeter
G1 X98.718 Y99.598 E0.01237 ; perimeter
G1 X98.722 Y99.357 E0.01120 ; perimeter
G1 X98.862 Y98.906 E0.02186 ; perimeter
G1 X99.018 Y98.533 E0.01872 ; perimeter
G1 X99.201 Y98.192 E0.01796 ; perimeter
G1 X99.184 Y98.014 E0.00825 ; perimeter
G1 X99.221 Y97.847 E0.00792 ; perimeter
G1 X99.200 Y97.440 E0.01889 ; perimeter
G1 X99.317 Y96.951 E0.02331 ; perimeter
G1 X99.446 Y96.696 E0.01320 ; perimeter
G1 X100.073 Y95.992 E0.04368 ; perimeter
G1 X100.213 Y95.762 E0.01247 ; perimeter
G1 X100.447 Y95.463 E0.01758 ; perimeter
G1 X100.562 Y95.344 E0.00770 ; perimeter
G1 X100.753 Y95.207 E0.01086 ; perimeter
G1 X101.302 Y94.995 E0.02724 ; perimeter
G1 X101.839 Y94.674 E0.02898 ; perimeter
G1 X102.212 Y94.401 E0.02143 ; perimeter
G1 X102.479 Y94.247 E0.01427 ; perimeter
G1 X102.939 Y94.175 E0.02158 ; perimeter
G1 X103.064 Y94.201 E0.00589 ; perimeter
G1 X103.180 Y94.273 E0.00637 ; perimeter
G1 X103.576 Y94.318 E0.01845 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.792 Y94.342 E0.00907 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.987 Y94.199 E0.01121 ; perimeter
G1 X104.310 Y94.081 E0.01593 ; perimeter
G1 X104.369 Y94.042 E0.00327 ; perimeter
G1 X104.909 Y93.985 E0.02515 ; perimeter
G1 X105.258 Y94.036 E0.01634 ; perimeter
G1 X105.323 Y94.088 E0.00384 ; perimeter
G1 X105.448 Y94.220 E0.00844 ; perimeter
G1 X105.477 Y94.394 E0.00817 ; perimeter
G1 X105.449 Y94.520 E0.00597 ; perimeter
G1 X105.279 Y94.595 F10800.000 ; move inwards before travel
G1 X105.226 Y94.354 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311284
G1 F2400.000
G1 X105.074 Y94.396 E0.00351 ; infill
G1 X104.423 Y94.376 E0.01452 ; infill
G1 X104.341 Y94.337 F10800.000 ; move to first infill point
;WIDTH:0.13425
G1 F2400.000
G1 X104.445 Y94.335 E0.00079 ; infill
;WIDTH:0.16266
G1 X105.175 Y94.282 E0.00729 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.445 Y94.335 E-0.19320 ; wipe and retract
;WIPE_END
G1 E-2.20680 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X102.981 Y94.433 ; move to first infill point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.403244
G1 F2400.000
G1 X102.185 Y94.927 E0.02805 ; infill
;WIDTH:0.379188
G1 X102.064 Y95.002 E0.00398 ; infill
;WIDTH:0.355918
G1 X101.780 Y95.158 E0.00843 ; infill
G1 X101.718 Y95.180 F10800.000 ; move to first infill point
;WIDTH:0.30487
G1 F2400.000
G1 X101.261 Y95.436 E0.01139 ; infill
;WIDTH:0.40052
G1 X100.957 Y95.586 E0.01008 ; infill
G1 X100.792 Y95.693 E0.00587 ; infill
;WIDTH:0.377198
G1 X100.749 Y95.725 E0.00150 ; infill
;WIDTH:0.35904
G1 X100.449 Y95.971 E0.01018 ; infill
G1 X99.445 Y97.518 F10800.000 ; move to first infill point
;WIDTH:0.194461
G1 F2400.000
G1 X99.814 Y96.665 E0.01171 ; infill
G1 X99.791 Y96.678 F10800.000 ; move to first infill point
;WIDTH:0.275457
G1 F2400.000
G1 X99.657 Y97.070 E0.00801 ; infill
G1 X99.585 Y97.476 E0.00797 ; infill
G1 X99.560 Y97.737 E0.00507 ; infill
;WIDTH:0.248891
G1 X99.543 Y97.863 E0.00218 ; infill
;WIDTH:0.202633
G1 X99.436 Y98.263 E0.00550 ; infill
G1 X99.503 Y98.247 F10800.000 ; move to first infill point
;WIDTH:0.248903
G1 F2400.000
G1 X99.329 Y98.681 E0.00801 ; infill
G1 X99.222 Y99.037 E0.00636 ; infill
;WIDTH:0.358092
G1 X99.136 Y99.423 E0.01036 ; infill
G1 X99.128 Y99.835 E0.01080 ; infill
G1 X99.280 Y100.820 E0.02611 ; infill
G1 X99.460 Y101.139 F10800.000 ; move to first infill point
;WIDTH:0.106646
G1 F2400.000
G1 X99.373 Y100.860 E0.00155 ; infill
;WIDTH:0.212301
G1 X99.246 Y100.387 E0.00690 ; infill
;WIDTH:0.32972
G1 X99.192 Y100.172 E0.00529 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.246 Y100.387 E-0.05849 ; wipe and retract
;WIPE_END
G1 E-2.34151 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X99.788 Y102.624 ; move to first infill point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.127205
G1 F2400.000
G1 X99.672 Y101.756 E0.00613 ; infill
G1 X99.647 Y101.788 F10800.000 ; move to first infill point
;WIDTH:0.256085
G1 F2400.000
G1 X99.703 Y101.968 E0.00335 ; infill
;WIDTH:0.304819
G1 X99.759 Y102.148 E0.00411 ; infill
;WIDTH:0.354649
G1 X99.920 Y102.758 E0.01634 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.759 Y102.148 E-0.16639 ; wipe and retract
;WIPE_END
G1 E-2.23361 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X101.645 Y105.566 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.770 Y105.663 E0.00735 ; perimeter
G1 X101.909 Y105.946 E0.01458 ; perimeter
G1 X101.930 Y106.190 E0.01136 ; perimeter
G1 X101.986 Y106.299 E0.00567 ; perimeter
G1 X101.999 Y106.519 E0.01019 ; perimeter
G1 X102.105 Y106.672 E0.00867 ; perimeter
G1 X102.158 Y106.843 E0.00828 ; perimeter
G1 X102.200 Y106.879 E0.00257 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.995 Y107.552 E0.04353 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.150 Y107.663 E0.00884 ; perimeter
G1 X103.279 Y107.679 E0.00599 ; perimeter
G1 X103.531 Y107.794 E0.01283 ; perimeter
G1 X103.868 Y107.862 E0.01594 ; perimeter
G1 X104.177 Y107.993 E0.01555 ; perimeter
G1 X104.535 Y108.219 E0.01959 ; perimeter
G1 X104.756 Y108.454 E0.01495 ; perimeter
G1 X104.790 Y108.531 E0.00387 ; perimeter
G1 X104.920 Y108.710 E0.01029 ; perimeter
G1 X104.892 Y108.706 E0.00133 ; perimeter
G1 X104.727 Y108.853 E0.01025 ; perimeter
G1 X104.434 Y108.849 E0.01353 ; perimeter
G1 X104.119 Y108.797 E0.01478 ; perimeter
G1 X103.727 Y108.646 E0.01948 ; perimeter
G1 X103.502 Y108.515 E0.01206 ; perimeter
G1 X103.340 Y108.382 E0.00971 ; perimeter
G1 X102.837 Y107.818 E0.03498 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.610 Y107.528 E0.01542 ; perimeter (bridge)
G1 X102.079 Y107.057 E0.02966 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.610 Y106.651 E0.02871 ; perimeter
G1 X101.486 Y106.627 E0.00586 ; perimeter
G1 X101.270 Y106.464 E0.01255 ; perimeter
G1 X101.222 Y106.452 E0.00229 ; perimeter
G1 X101.126 Y106.329 E0.00721 ; perimeter
G1 X101.051 Y106.079 E0.01211 ; perimeter
G1 X101.077 Y105.844 E0.01099 ; perimeter
G1 X101.210 Y105.635 E0.01148 ; perimeter
G1 X101.351 Y105.606 E0.00665 ; perimeter
G1 X101.437 Y105.545 E0.00490 ; perimeter
G1 X101.586 Y105.559 E0.00690 ; perimeter
G1 X101.665 Y105.723 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.770 Y105.663 E-0.05597 ; wipe and retract
G1 X101.909 Y105.946 E-0.08304 ; wipe and retract
G1 X101.930 Y106.190 E-0.06470 ; wipe and retract
G1 X101.986 Y106.299 E-0.03232 ; wipe and retract
G1 X101.999 Y106.519 E-0.05804 ; wipe and retract
G1 X102.105 Y106.672 E-0.04942 ; wipe and retract
G1 X102.158 Y106.843 E-0.04715 ; wipe and retract
G1 X102.200 Y106.879 E-0.01466 ; wipe and retract
;WIPE_END
G1 E-1.99471 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X103.405 Y108.092 ; move to first infill point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.317387
G1 F2400.000
G1 X103.755 Y108.225 E0.00855 ; infill
;WIDTH:0.332892
G1 X104.540 Y108.609 E0.02107 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.755 Y108.225 E-0.23059 ; wipe and retract
;WIPE_END
G1 E-2.16941 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X107.290 Y110.083 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.514 Y109.997 E0.01111 ; perimeter
G1 X107.688 Y109.972 E0.00814 ; perimeter
G1 X107.835 Y109.980 E0.00685 ; perimeter
G1 X108.105 Y110.064 E0.01310 ; perimeter
G1 X108.222 Y110.127 E0.00613 ; perimeter
G1 X108.354 Y110.265 E0.00885 ; perimeter
G1 X108.415 Y110.402 E0.00695 ; perimeter
G1 X108.436 Y110.526 E0.00584 ; perimeter
G1 X108.399 Y110.679 E0.00732 ; perimeter
G1 X108.276 Y110.802 E0.00805 ; perimeter
G1 X108.129 Y110.850 E0.00717 ; perimeter
G1 X107.950 Y110.854 E0.00833 ; perimeter
G1 X107.706 Y110.775 E0.01187 ; perimeter
G1 X107.525 Y110.651 E0.01015 ; perimeter
G1 X107.458 Y110.573 E0.00476 ; perimeter
G1 X107.399 Y110.393 E0.00876 ; perimeter
G1 X107.328 Y110.294 E0.00566 ; perimeter
G1 X107.326 Y110.125 E0.00782 ; perimeter
G1 X107.526 Y110.123 F10800.000 ; move inwards before travel
G1 X107.589 Y110.230 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.139106
G1 F2400.000
G1 X107.662 Y110.268 E0.00066 ; infill
;WIDTH:0.18102
G1 X107.690 Y110.285 E0.00038 ; infill
;WIDTH:0.219717
G1 X107.718 Y110.308 E0.00053 ; infill
;WIDTH:0.23562
G1 X108.103 Y110.605 E0.00779 ; infill
G1 X108.177 Y110.560 F10800.000 ; move to first infill point
;WIDTH:0.252002
G1 F2400.000
G1 X108.007 Y110.464 E0.00340 ; infill
;WIDTH:0.354624
G1 X107.798 Y110.372 E0.00592 ; infill
;WIDTH:0.332407
G1 X107.645 Y110.222 E0.00516 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.798 Y110.372 E-0.05658 ; wipe and retract
;WIPE_END
G1 E-2.34342 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X110.335 Y112.952 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.493 Y112.870 E0.00826 ; perimeter
G1 X110.609 Y112.853 E0.00543 ; perimeter
G1 X110.737 Y112.867 E0.00595 ; perimeter
G1 X110.876 Y112.913 E0.00678 ; perimeter
G1 X111.069 Y113.064 E0.01136 ; perimeter
G1 X111.181 Y113.252 E0.01011 ; perimeter
G1 X111.203 Y113.397 E0.00680 ; perimeter
G1 X111.188 Y113.512 E0.00533 ; perimeter
G1 X111.149 Y113.601 E0.00453 ; perimeter
G1 X111.093 Y113.660 E0.00377 ; perimeter
G1 X110.930 Y113.733 E0.00824 ; perimeter
G1 X110.817 Y113.737 E0.00525 ; perimeter
G1 X110.655 Y113.705 E0.00765 ; perimeter
G1 X110.574 Y113.661 E0.00429 ; perimeter
G1 X110.351 Y113.480 E0.01329 ; perimeter
G1 X110.263 Y113.320 E0.00846 ; perimeter
G1 X110.242 Y113.118 E0.00939 ; perimeter
G1 X110.306 Y113.004 E0.00607 ; perimeter
G1 X110.507 Y112.999 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.493 Y112.870 E-0.06088 ; wipe and retract
G1 X110.609 Y112.853 E-0.03094 ; wipe and retract
G1 X110.737 Y112.867 E-0.03392 ; wipe and retract
G1 X110.876 Y112.913 E-0.03864 ; wipe and retract
G1 X111.069 Y113.064 E-0.06473 ; wipe and retract
G1 X111.181 Y113.252 E-0.05759 ; wipe and retract
G1 X111.203 Y113.397 E-0.03876 ; wipe and retract
G1 X111.188 Y113.512 E-0.03035 ; wipe and retract
G1 X111.149 Y113.601 E-0.02583 ; wipe and retract
G1 X111.093 Y113.660 E-0.02146 ; wipe and retract
G1 X110.930 Y113.733 E-0.04694 ; wipe and retract
G1 X110.817 Y113.737 E-0.02991 ; wipe and retract
G1 X110.655 Y113.705 E-0.04358 ; wipe and retract
G1 X110.574 Y113.661 E-0.02444 ; wipe and retract
G1 X110.351 Y113.480 E-0.07572 ; wipe and retract
G1 X110.263 Y113.320 E-0.04817 ; wipe and retract
G1 X110.242 Y113.118 E-0.05352 ; wipe and retract
G1 X110.306 Y113.004 E-0.03458 ; wipe and retract
;WIPE_END
G1 E-1.64004 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X113.009 Y115.520 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.111 Y115.427 E0.00640 ; perimeter
G1 X113.308 Y115.359 E0.00965 ; perimeter
G1 X113.542 Y115.325 E0.01094 ; perimeter
G1 X113.915 Y115.427 E0.01795 ; perimeter
G1 X114.301 Y115.339 E0.01834 ; perimeter
G1 X114.691 Y115.100 E0.02118 ; perimeter
G1 X115.031 Y114.717 E0.02371 ; perimeter
G1 X115.237 Y114.539 E0.01262 ; perimeter
G1 X115.319 Y114.502 E0.00418 ; perimeter
G1 X115.454 Y114.483 E0.00629 ; perimeter
G1 X115.657 Y114.562 E0.01012 ; perimeter
G1 X115.775 Y114.691 E0.00810 ; perimeter
G1 X115.816 Y114.832 E0.00680 ; perimeter
G1 X115.821 Y114.952 E0.00557 ; perimeter
G1 X115.765 Y115.129 E0.00859 ; perimeter
G1 X115.214 Y115.804 E0.04039 ; perimeter
G1 X115.080 Y115.913 E0.00797 ; perimeter
G1 X114.927 Y115.974 E0.00764 ; perimeter
G1 X114.733 Y115.991 E0.00903 ; perimeter
G1 X114.525 Y115.949 E0.00981 ; perimeter
G1 X114.039 Y116.003 E0.02268 ; perimeter
G1 X113.648 Y116.136 E0.01912 ; perimeter
G1 X113.381 Y116.142 E0.01238 ; perimeter
G1 X113.141 Y116.098 E0.01129 ; perimeter
G1 X113.023 Y116.010 E0.00682 ; perimeter
G1 X112.962 Y115.887 E0.00636 ; perimeter
G1 X112.943 Y115.739 E0.00692 ; perimeter
G1 X112.988 Y115.577 E0.00779 ; perimeter
G1 X113.147 Y115.531 F10800.000 ; move inwards before travel
G1 X113.207 Y115.838 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.148605
G1 F2400.000
G1 X113.980 Y115.714 E0.00688 ; infill
;WIDTH:0.198143
G1 X114.411 Y115.641 E0.00564 ; infill
;WIDTH:0.205307
G1 X115.201 Y115.439 E0.01101 ; infill
G1 X115.432 Y114.875 F10800.000 ; move to first infill point
;WIDTH:0.345717
G1 F2400.000
G1 X115.411 Y114.923 E0.00132 ; infill
G1 X114.947 Y115.449 E0.01766 ; infill
;WIDTH:0.444001
G1 X114.852 Y115.524 E0.00402 ; infill
G1 X114.478 Y115.711 E0.01397 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.852 Y115.524 E-0.11050 ; wipe and retract
G1 X114.947 Y115.449 E-0.03179 ; wipe and retract
;WIPE_END
G1 E-2.25771 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 X115.354 Y112.084 ; move to first perimeter point
G1 Z18.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.261 Y112.027 E0.00503 ; perimeter
G1 X115.171 Y111.895 E0.00740 ; perimeter
G1 X115.132 Y111.717 E0.00846 ; perimeter
G1 X115.190 Y111.456 E0.01234 ; perimeter
G1 X115.263 Y111.355 E0.00578 ; perimeter
G1 X115.349 Y111.301 E0.00472 ; perimeter
G1 X115.540 Y111.269 E0.00897 ; perimeter
G1 X115.666 Y111.298 E0.00595 ; perimeter
G1 X115.825 Y111.430 E0.00958 ; perimeter
G1 X115.885 Y111.570 E0.00706 ; perimeter
G1 X115.886 Y111.831 E0.01207 ; perimeter
G1 X115.807 Y111.992 E0.00833 ; perimeter
G1 X115.718 Y112.069 E0.00543 ; perimeter
G1 X115.617 Y112.110 E0.00506 ; perimeter
G1 X115.412 Y112.100 E0.00952 ; perimeter
G1 X115.335 Y111.977 F10800.000 ; move inwards before travel
G1 X115.511 Y111.622 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.292357
G1 F2400.000
G1 X115.518 Y111.738 E0.00241 ; infill
;LAYER_CHANGE
;Z:18.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;18.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.511 Y111.622 E-0.03063 ; wipe and retract
;WIPE_END
G1 E-2.36937 F2400.000 ; retract
G1 Z18.675 F10800.000 ; lift Z
G1 Z18.800 ; move to next layer (93)
;AFTER_LAYER_CHANGE
;18.8
G1 Z18.875 ; lift Z
G1 X104.566 Y108.607 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.366 Y108.705 E0.01033 ; perimeter
G1 X104.194 Y108.721 E0.00800 ; perimeter
G1 X103.878 Y108.686 E0.01473 ; perimeter
G1 X103.668 Y108.606 E0.01038 ; perimeter
G1 X103.303 Y108.424 E0.01891 ; perimeter
G1 X103.119 Y108.268 E0.01115 ; perimeter
G1 X101.788 Y107.018 E0.08460 ; perimeter
G1 X101.224 Y106.543 E0.03415 ; perimeter
G1 X101.104 Y106.409 E0.00832 ; perimeter
G1 X101.013 Y106.110 E0.01449 ; perimeter
G1 X101.045 Y105.870 E0.01120 ; perimeter
G1 X101.192 Y105.664 E0.01174 ; perimeter
G1 X101.402 Y105.624 E0.00992 ; perimeter
G1 X101.512 Y105.663 E0.00540 ; perimeter
G1 X101.668 Y105.681 E0.00725 ; perimeter
G1 X101.776 Y105.770 E0.00650 ; perimeter
G1 X101.999 Y106.260 E0.02494 ; perimeter
G1 X102.113 Y106.452 E0.01033 ; perimeter
G1 X102.363 Y106.773 E0.01885 ; perimeter
G1 X103.147 Y107.494 E0.04935 ; perimeter
G1 X103.428 Y107.648 E0.01481 ; perimeter
G1 X104.014 Y107.900 E0.02955 ; perimeter
G1 X104.334 Y108.122 E0.01807 ; perimeter
G1 X104.450 Y108.275 E0.00888 ; perimeter
G1 X104.566 Y108.547 E0.01371 ; perimeter
G1 X104.344 Y108.591 F10800.000 ; move inwards before travel
G1 X104.254 Y108.425 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.267626
G1 F2400.000
G1 X103.978 Y108.332 E0.00543 ; infill
G1 X103.515 Y108.102 E0.00965 ; infill
G1 X103.283 Y107.955 E0.00514 ; infill
;WIDTH:0.240962
G1 X103.128 Y107.843 E0.00315 ; infill
;WIDTH:0.192434
G1 X102.981 Y107.737 E0.00226 ; infill
;WIDTH:0.146708
G1 X102.155 Y106.970 E0.00972 ; infill
;WIDTH:0.133446
G1 X101.838 Y106.632 E0.00348 ; infill
;WIDTH:0.258151
G1 X101.279 Y105.957 E0.01570 ; infill
G1 X101.324 Y105.893 F10800.000 ; move to first infill point
;WIDTH:0.32606
G1 F2400.000
G1 X101.409 Y106.033 E0.00384 ; infill
;WIDTH:0.358845
G1 X101.423 Y106.053 E0.00064 ; infill
;WIDTH:0.395176
G1 X101.438 Y106.075 E0.00079 ; infill
;WIDTH:0.413687
G1 X101.488 Y106.200 E0.00415 ; infill
G1 X101.926 Y106.819 E0.02337 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.488 Y106.200 E-0.20006 ; wipe and retract
G1 X101.438 Y106.075 E-0.03555 ; wipe and retract
;WIPE_END
G1 E-2.16439 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X108.500 Y110.731 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.402 Y110.840 E0.00679 ; perimeter
G1 X108.232 Y110.893 E0.00825 ; perimeter
G1 X108.023 Y110.895 E0.00967 ; perimeter
G1 X107.821 Y110.826 E0.00991 ; perimeter
G1 X107.600 Y110.655 E0.01295 ; perimeter
G1 X107.507 Y110.369 E0.01391 ; perimeter
G1 X107.508 Y110.269 E0.00464 ; perimeter
G1 X107.580 Y110.141 E0.00678 ; perimeter
G1 X107.672 Y110.078 E0.00519 ; perimeter
G1 X107.924 Y110.039 E0.01180 ; perimeter
G1 X108.173 Y110.102 E0.01188 ; perimeter
G1 X108.335 Y110.186 E0.00847 ; perimeter
G1 X108.462 Y110.318 E0.00849 ; perimeter
G1 X108.522 Y110.453 E0.00683 ; perimeter
G1 X108.538 Y110.549 E0.00450 ; perimeter
G1 X108.521 Y110.675 E0.00588 ; perimeter
G1 X108.354 Y110.733 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.402 Y110.840 E-0.05366 ; wipe and retract
G1 X108.232 Y110.893 E-0.04702 ; wipe and retract
G1 X108.023 Y110.895 E-0.05511 ; wipe and retract
G1 X107.821 Y110.826 E-0.05648 ; wipe and retract
G1 X107.600 Y110.655 E-0.07378 ; wipe and retract
G1 X107.507 Y110.369 E-0.07925 ; wipe and retract
G1 X107.508 Y110.269 E-0.02644 ; wipe and retract
G1 X107.580 Y110.141 E-0.03863 ; wipe and retract
G1 X107.672 Y110.078 E-0.02957 ; wipe and retract
G1 X107.924 Y110.039 E-0.06720 ; wipe and retract
G1 X108.173 Y110.102 E-0.06770 ; wipe and retract
G1 X108.335 Y110.186 E-0.04825 ; wipe and retract
G1 X108.462 Y110.318 E-0.04838 ; wipe and retract
G1 X108.522 Y110.453 E-0.03888 ; wipe and retract
G1 X108.538 Y110.549 E-0.02565 ; wipe and retract
G1 X108.521 Y110.675 E-0.03353 ; wipe and retract
;WIPE_END
G1 E-1.61049 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X110.396 Y113.053 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.552 Y112.952 E0.00861 ; perimeter
G1 X110.840 Y112.939 E0.01339 ; perimeter
G1 X110.949 Y112.972 E0.00525 ; perimeter
G1 X111.162 Y113.133 E0.01237 ; perimeter
G1 X111.279 Y113.326 E0.01044 ; perimeter
G1 X111.301 Y113.425 E0.00473 ; perimeter
G1 X111.288 Y113.547 E0.00567 ; perimeter
G1 X111.240 Y113.674 E0.00632 ; perimeter
G1 X111.190 Y113.727 E0.00337 ; perimeter
G1 X111.030 Y113.806 E0.00822 ; perimeter
G1 X110.944 Y113.813 E0.00404 ; perimeter
G1 X110.750 Y113.778 E0.00910 ; perimeter
G1 X110.585 Y113.689 E0.00869 ; perimeter
G1 X110.455 Y113.564 E0.00837 ; perimeter
G1 X110.360 Y113.391 E0.00912 ; perimeter
G1 X110.334 Y113.259 E0.00624 ; perimeter
G1 X110.371 Y113.108 E0.00723 ; perimeter
G1 X110.578 Y113.085 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.552 Y112.952 E-0.06287 ; wipe and retract
G1 X110.840 Y112.939 E-0.07627 ; wipe and retract
G1 X110.949 Y112.972 E-0.02989 ; wipe and retract
G1 X111.162 Y113.133 E-0.07049 ; wipe and retract
G1 X111.279 Y113.326 E-0.05949 ; wipe and retract
G1 X111.301 Y113.425 E-0.02694 ; wipe and retract
G1 X111.288 Y113.547 E-0.03229 ; wipe and retract
G1 X111.240 Y113.674 E-0.03601 ; wipe and retract
G1 X111.190 Y113.727 E-0.01920 ; wipe and retract
G1 X111.030 Y113.806 E-0.04684 ; wipe and retract
G1 X110.944 Y113.813 E-0.02304 ; wipe and retract
G1 X110.750 Y113.778 E-0.05183 ; wipe and retract
G1 X110.585 Y113.689 E-0.04951 ; wipe and retract
G1 X110.455 Y113.564 E-0.04768 ; wipe and retract
G1 X110.360 Y113.391 E-0.05195 ; wipe and retract
G1 X110.334 Y113.259 E-0.03554 ; wipe and retract
G1 X110.371 Y113.108 E-0.04121 ; wipe and retract
;WIPE_END
G1 E-1.63897 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X113.097 Y115.526 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.226 Y115.402 E0.00829 ; perimeter
G1 X113.367 Y115.359 E0.00686 ; perimeter
G1 X113.671 Y115.316 E0.01422 ; perimeter
G1 X113.882 Y115.374 E0.01014 ; perimeter
G1 X114.328 Y115.291 E0.02099 ; perimeter
G1 X114.515 Y115.173 E0.01025 ; perimeter
G1 X114.674 Y115.108 E0.00797 ; perimeter
G1 X114.955 Y114.792 E0.01956 ; perimeter
G1 X115.210 Y114.560 E0.01602 ; perimeter
G1 X115.349 Y114.497 E0.00703 ; perimeter
G1 X115.453 Y114.488 E0.00485 ; perimeter
G1 X115.548 Y114.516 E0.00459 ; perimeter
G1 X115.652 Y114.568 E0.00540 ; perimeter
G1 X115.775 Y114.704 E0.00846 ; perimeter
G1 X115.815 Y114.963 E0.01217 ; perimeter
G1 X115.770 Y115.121 E0.00762 ; perimeter
G1 X115.224 Y115.799 E0.04033 ; perimeter
G1 X115.081 Y115.915 E0.00852 ; perimeter
G1 X114.922 Y115.979 E0.00791 ; perimeter
G1 X114.730 Y116.000 E0.00897 ; perimeter
G1 X114.641 Y115.986 E0.00418 ; perimeter
G1 X114.143 Y116.047 E0.02323 ; perimeter
G1 X113.880 Y116.113 E0.01255 ; perimeter
G1 X113.489 Y116.136 E0.01814 ; perimeter
G1 X113.237 Y116.096 E0.01182 ; perimeter
G1 X113.106 Y115.994 E0.00770 ; perimeter
G1 X113.035 Y115.858 E0.00712 ; perimeter
G1 X113.037 Y115.713 E0.00669 ; perimeter
G1 X113.078 Y115.583 E0.00632 ; perimeter
G1 X113.275 Y115.539 F10800.000 ; move inwards before travel
G1 X113.329 Y115.637 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.324843
G1 F2400.000
G1 X113.430 Y115.739 E0.00337 ; infill
;WIDTH:0.334376
G1 X113.451 Y115.738 E0.00052 ; infill
;WIDTH:0.351797
G1 X113.509 Y115.739 E0.00150 ; infill
;WIDTH:0.36301
G1 X113.734 Y115.734 E0.00600 ; infill
;WIDTH:0.270028
G1 X113.894 Y115.738 E0.00301 ; infill
G1 X114.085 Y115.697 E0.00369 ; infill
;WIDTH:0.292559
G1 X114.440 Y115.642 E0.00746 ; infill
;WIDTH:0.3049
G1 X115.195 Y115.450 E0.01697 ; infill
G1 X115.405 Y114.929 F10800.000 ; move to first infill point
;WIDTH:0.403509
G1 F2400.000
G1 X114.909 Y115.487 E0.02238 ; infill
G1 X114.812 Y115.538 E0.00331 ; infill
G1 X114.626 Y115.581 E0.00572 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.812 Y115.538 E-0.05035 ; wipe and retract
G1 X114.909 Y115.487 E-0.02918 ; wipe and retract
G1 X115.405 Y114.929 E-0.19701 ; wipe and retract
;WIPE_END
G1 E-2.12346 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X115.399 Y112.056 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.266 Y111.981 E0.00706 ; perimeter
G1 X115.169 Y111.839 E0.00795 ; perimeter
G1 X115.134 Y111.683 E0.00742 ; perimeter
G1 X115.183 Y111.424 E0.01222 ; perimeter
G1 X115.264 Y111.306 E0.00661 ; perimeter
G1 X115.378 Y111.241 E0.00612 ; perimeter
G1 X115.572 Y111.227 E0.00899 ; perimeter
G1 X115.658 Y111.247 E0.00411 ; perimeter
G1 X115.816 Y111.364 E0.00911 ; perimeter
G1 X115.877 Y111.481 E0.00609 ; perimeter
G1 X115.893 Y111.723 E0.01122 ; perimeter
G1 X115.874 Y111.818 E0.00450 ; perimeter
G1 X115.808 Y111.941 E0.00647 ; perimeter
G1 X115.717 Y112.018 E0.00551 ; perimeter
G1 X115.606 Y112.060 E0.00550 ; perimeter
G1 X115.459 Y112.057 E0.00684 ; perimeter
G1 X115.365 Y111.907 F10800.000 ; move inwards before travel
G1 X115.516 Y111.685 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.306662
G1 F2400.000
G1 X115.529 Y111.697 E0.00039 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.516 Y111.685 E-0.00473 ; wipe and retract
;WIPE_END
G1 E-2.39527 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X115.557 Y105.918 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.428 Y105.915 E0.00598 ; perimeter
G1 X115.297 Y105.861 E0.00659 ; perimeter
G1 X115.242 Y105.804 E0.00368 ; perimeter
G1 X115.153 Y105.570 E0.01162 ; perimeter
G1 X115.147 Y105.368 E0.00934 ; perimeter
G1 X115.220 Y105.162 E0.01012 ; perimeter
G1 X115.292 Y105.070 E0.00541 ; perimeter
G1 X115.411 Y105.004 E0.00631 ; perimeter
G1 X115.537 Y104.984 E0.00592 ; perimeter
G1 X115.687 Y105.063 E0.00785 ; perimeter
G1 X115.812 Y105.196 E0.00844 ; perimeter
G1 X115.875 Y105.385 E0.00925 ; perimeter
G1 X115.870 Y105.588 E0.00938 ; perimeter
G1 X115.806 Y105.761 E0.00854 ; perimeter
G1 X115.691 Y105.879 E0.00763 ; perimeter
G1 X115.615 Y105.901 E0.00368 ; perimeter
G1 X115.475 Y105.819 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.428 Y105.915 E-0.04936 ; wipe and retract
G1 X115.297 Y105.861 E-0.03755 ; wipe and retract
G1 X115.242 Y105.804 E-0.02095 ; wipe and retract
G1 X115.153 Y105.570 E-0.06622 ; wipe and retract
G1 X115.147 Y105.368 E-0.05318 ; wipe and retract
G1 X115.220 Y105.162 E-0.05768 ; wipe and retract
G1 X115.292 Y105.070 E-0.03082 ; wipe and retract
G1 X115.411 Y105.004 E-0.03595 ; wipe and retract
G1 X115.537 Y104.984 E-0.03375 ; wipe and retract
G1 X115.687 Y105.063 E-0.04473 ; wipe and retract
G1 X115.812 Y105.196 E-0.04807 ; wipe and retract
G1 X115.875 Y105.385 E-0.05272 ; wipe and retract
G1 X115.870 Y105.588 E-0.05346 ; wipe and retract
G1 X115.806 Y105.761 E-0.04865 ; wipe and retract
G1 X115.691 Y105.879 E-0.04345 ; wipe and retract
G1 X115.615 Y105.901 E-0.02098 ; wipe and retract
;WIPE_END
G1 E-1.70245 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X115.246 Y103.916 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.162 Y103.890 E0.00408 ; perimeter
G1 X115.066 Y103.791 E0.00638 ; perimeter
G1 X114.985 Y103.741 E0.00443 ; perimeter
G1 X114.833 Y103.546 E0.01143 ; perimeter
G1 X114.677 Y103.219 E0.01682 ; perimeter
G1 X114.600 Y102.985 E0.01141 ; perimeter
G1 X114.519 Y102.517 E0.02201 ; perimeter
G1 X114.514 Y102.337 E0.00834 ; perimeter
G1 X114.308 Y101.725 E0.02992 ; perimeter
G1 X114.143 Y101.641 E0.00855 ; perimeter
G1 X113.883 Y101.358 E0.01780 ; perimeter
G1 X113.759 Y101.161 E0.01080 ; perimeter
G1 X113.740 Y100.877 E0.01317 ; perimeter
G1 X113.697 Y100.739 E0.00672 ; perimeter
G1 X113.774 Y100.571 E0.00853 ; perimeter
G1 X113.823 Y100.544 E0.00259 ; perimeter
G1 X114.034 Y100.603 E0.01016 ; perimeter
G1 X114.155 Y100.609 E0.00557 ; perimeter
G1 X114.402 Y100.757 E0.01336 ; perimeter
G1 X114.682 Y101.104 E0.02062 ; perimeter
G1 X114.793 Y101.475 E0.01796 ; perimeter
G1 X114.976 Y101.924 E0.02243 ; perimeter
G1 X115.201 Y102.312 E0.02081 ; perimeter
G1 X115.298 Y102.533 E0.01117 ; perimeter
G1 X115.388 Y102.888 E0.01696 ; perimeter
G1 X115.437 Y103.301 E0.01927 ; perimeter
G1 X115.371 Y103.727 E0.01997 ; perimeter
G1 X115.294 Y103.885 E0.00814 ; perimeter
G1 X115.186 Y103.851 F10800.000 ; move inwards before travel
G1 X115.158 Y103.525 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.281497
G1 F2400.000
G1 X115.029 Y103.078 E0.00923 ; infill
G1 X114.790 Y102.085 E0.02027 ; infill
G1 X114.826 Y102.292 F10800.000 ; move to first infill point
;WIDTH:0.188576
G1 F2400.000
G1 X114.819 Y102.272 E0.00026 ; infill
;WIDTH:0.181214
G1 X114.720 Y102.053 E0.00277 ; infill
;WIDTH:0.133056
G1 X114.539 Y101.566 E0.00389 ; infill
;WIDTH:0.0998104
G1 X114.170 Y100.899 E0.00360 ; infill
G1 X113.982 Y100.892 F10800.000 ; move to first infill point
;WIDTH:0.345134
G1 F2400.000
G1 X114.158 Y101.064 E0.00618 ; infill
G1 X114.565 Y101.556 E0.01604 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.158 Y101.064 E-0.16849 ; wipe and retract
G1 X113.982 Y100.892 E-0.06492 ; wipe and retract
;WIPE_END
G1 E-2.16659 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X113.219 Y99.757 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.129 Y99.795 E0.00451 ; perimeter
G1 X112.995 Y99.740 E0.00672 ; perimeter
G1 X112.738 Y99.572 E0.01421 ; perimeter
G1 X112.489 Y99.303 E0.01700 ; perimeter
G1 X112.294 Y99.023 E0.01576 ; perimeter
G1 X112.164 Y98.790 E0.01237 ; perimeter
G1 X111.884 Y98.024 E0.03777 ; perimeter
G1 X111.589 Y97.840 E0.01612 ; perimeter
G1 X111.369 Y97.659 E0.01320 ; perimeter
G1 X111.213 Y97.447 E0.01220 ; perimeter
G1 X111.199 Y97.340 E0.00501 ; perimeter
G1 X111.114 Y97.212 E0.00710 ; perimeter
G1 X111.134 Y97.128 E0.00404 ; perimeter
G1 X111.116 Y97.046 E0.00388 ; perimeter
G1 X111.169 Y96.992 E0.00352 ; perimeter
G1 X111.157 Y96.892 E0.00466 ; perimeter
G1 X111.325 Y96.931 E0.00796 ; perimeter
G1 X111.525 Y96.887 E0.00950 ; perimeter
G1 X111.687 Y96.921 E0.00768 ; perimeter
G1 X111.869 Y97.022 E0.00963 ; perimeter
G1 X112.012 Y97.177 E0.00977 ; perimeter
G1 X112.173 Y97.513 E0.01726 ; perimeter
G1 X112.256 Y97.769 E0.01245 ; perimeter
G1 X112.472 Y98.093 E0.01802 ; perimeter
G1 X112.640 Y98.217 E0.00968 ; perimeter
G1 X112.861 Y98.461 E0.01524 ; perimeter
G1 X113.107 Y98.873 E0.02222 ; perimeter
G1 X113.231 Y99.233 E0.01767 ; perimeter
G1 X113.266 Y99.629 E0.01839 ; perimeter
G1 X113.238 Y99.700 E0.00357 ; perimeter
G1 X113.125 Y99.731 F10800.000 ; move inwards before travel
G1 X113.001 Y99.456 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.226693
G1 F2400.000
G1 X112.765 Y99.038 E0.00733 ; infill
;WIDTH:0.335076
G1 X112.508 Y98.633 E0.01167 ; infill
;WIDTH:0.314719
G1 X112.380 Y98.421 E0.00558 ; infill
;WIDTH:0.278474
G1 X112.253 Y98.210 E0.00484 ; infill
G1 X111.973 Y97.678 F10800.000 ; move to first infill point
;WIDTH:0.35788
G1 F2400.000
G1 X111.660 Y97.383 E0.01128 ; infill
G1 X111.465 Y97.147 E0.00800 ; infill
G1 X111.393 Y97.163 F10800.000 ; move to first infill point
;WIDTH:0.211309
G1 F2400.000
G1 X111.460 Y97.198 E0.00106 ; infill
;WIDTH:0.238574
G1 X111.527 Y97.234 E0.00123 ; infill
;WIDTH:0.248636
G1 X111.533 Y97.240 E0.00015 ; infill
;WIDTH:0.292152
G1 X111.558 Y97.268 E0.00078 ; infill
;WIDTH:0.327509
G1 X111.874 Y97.734 E0.01333 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.558 Y97.268 E-0.14868 ; wipe and retract
;WIPE_END
G1 E-2.25132 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X109.951 Y96.265 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.795 Y96.319 E0.00763 ; perimeter
G1 X109.343 Y96.289 E0.02098 ; perimeter
G1 X108.825 Y96.173 E0.02461 ; perimeter
G1 X108.507 Y96.029 E0.01616 ; perimeter
G1 X108.439 Y95.986 E0.00372 ; perimeter
G1 X108.321 Y95.836 E0.00886 ; perimeter
G1 X108.313 Y95.745 E0.00423 ; perimeter
G1 X108.356 Y95.474 E0.01272 ; perimeter
G1 X108.630 Y95.294 E0.01517 ; perimeter
G1 X108.785 Y95.259 E0.00738 ; perimeter
G1 X108.835 Y95.261 E0.00231 ; perimeter
G1 X109.032 Y95.337 E0.00978 ; perimeter
G1 X109.313 Y95.497 E0.01498 ; perimeter
G1 X109.375 Y95.609 E0.00592 ; perimeter
G1 X109.792 Y95.932 E0.02445 ; perimeter
G1 X109.816 Y96.007 E0.00366 ; perimeter
G1 X109.959 Y96.206 E0.01137 ; perimeter
G1 X109.788 Y96.240 F10800.000 ; move inwards before travel
G1 X108.768 Y95.510 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334598
G1 F2400.000
G1 X108.788 Y95.694 E0.00449 ; infill
G1 X109.010 Y95.795 E0.00593 ; infill
G1 X109.407 Y96.052 E0.01146 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.010 Y95.795 E-0.12470 ; wipe and retract
G1 X108.788 Y95.694 E-0.06447 ; wipe and retract
G1 X108.768 Y95.510 E-0.04889 ; wipe and retract
;WIPE_END
G1 E-2.16193 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X99.956 Y96.507 ; move to first perimeter point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.890 Y96.795 E0.01366 ; perimeter
G1 X99.955 Y96.912 E0.00618 ; perimeter
G1 X99.934 Y97.062 E0.00705 ; perimeter
G1 X99.978 Y97.325 E0.01233 ; perimeter
G1 X99.977 Y97.575 E0.01159 ; perimeter
G1 X99.916 Y97.924 E0.01641 ; perimeter
G1 X99.677 Y98.830 E0.04341 ; perimeter
G1 X99.645 Y99.056 E0.01055 ; perimeter
G1 X99.509 Y99.459 E0.01971 ; perimeter
G1 X99.541 Y100.000 E0.02511 ; perimeter
G1 X99.692 Y100.567 E0.02718 ; perimeter
G1 X99.728 Y100.819 E0.01180 ; perimeter
G1 X99.855 Y101.276 E0.02197 ; perimeter
G1 X100.077 Y101.881 E0.02986 ; perimeter
G1 X100.159 Y102.033 E0.00801 ; perimeter
G1 X100.210 Y102.353 E0.01501 ; perimeter
G1 X100.213 Y102.428 E0.00345 ; perimeter
G1 X100.144 Y102.678 E0.01204 ; perimeter
G1 X100.068 Y102.786 E0.00612 ; perimeter
G1 X99.937 Y102.836 E0.00646 ; perimeter
G1 X99.786 Y102.813 E0.00709 ; perimeter
G1 X99.672 Y102.750 E0.00602 ; perimeter
G1 X99.470 Y102.509 E0.01456 ; perimeter
G1 X99.387 Y102.299 E0.01049 ; perimeter
G1 X99.269 Y101.640 E0.03100 ; perimeter
G1 X98.869 Y100.481 E0.05680 ; perimeter
G1 X98.764 Y100.009 E0.02240 ; perimeter
G1 X98.737 Y99.695 E0.01459 ; perimeter
G1 X98.807 Y99.107 E0.02742 ; perimeter
G1 X98.952 Y98.574 E0.02558 ; perimeter
G1 X99.084 Y98.192 E0.01875 ; perimeter
G1 X99.213 Y97.393 E0.03750 ; perimeter
G1 X99.358 Y97.022 E0.01842 ; perimeter
G1 X99.417 Y96.927 E0.00522 ; perimeter
G1 X99.582 Y96.780 E0.01022 ; perimeter
G1 X99.727 Y96.729 E0.00710 ; perimeter
G1 X99.907 Y96.538 E0.01215 ; perimeter
G1 X99.824 Y96.772 F10800.000 ; move inwards before travel
G1 X100.262 Y96.101 ; move to first perimeter point
G1 F1800.000
G1 X100.393 Y95.756 E0.01710 ; perimeter
G1 X100.641 Y95.368 E0.02129 ; perimeter
G1 X100.761 Y95.251 E0.00780 ; perimeter
G1 X100.842 Y95.193 E0.00457 ; perimeter
G1 X101.313 Y95.006 E0.02350 ; perimeter
G1 X101.504 Y94.899 E0.01015 ; perimeter
G1 X101.979 Y94.618 E0.02555 ; perimeter
G1 X102.410 Y94.308 E0.02461 ; perimeter
G1 X102.641 Y94.170 E0.01244 ; perimeter
G1 X102.877 Y94.133 E0.01105 ; perimeter
G1 X102.967 Y94.098 E0.00447 ; perimeter
G1 X103.271 Y94.068 E0.01415 ; perimeter
G1 X103.703 Y94.131 E0.02024 ; perimeter
G1 X104.085 Y94.010 E0.01856 ; perimeter
G1 X104.591 Y93.950 E0.02363 ; perimeter
G1 X105.288 Y94.034 E0.03251 ; perimeter
G1 X105.441 Y94.113 E0.00800 ; perimeter
G1 X105.483 Y94.167 E0.00315 ; perimeter
G1 X105.496 Y94.257 E0.00423 ; perimeter
G1 X105.573 Y94.452 E0.00971 ; perimeter
G1 X105.555 Y94.577 E0.00582 ; perimeter
G1 X105.420 Y94.741 E0.00987 ; perimeter
G1 X105.201 Y94.800 E0.01047 ; perimeter
G1 X104.452 Y94.720 E0.03492 ; perimeter
G1 X104.151 Y94.602 E0.01497 ; perimeter
G1 X103.608 Y94.606 E0.02514 ; perimeter
G1 X103.372 Y94.768 E0.01327 ; perimeter
G1 X103.017 Y94.899 E0.01750 ; perimeter
G1 X102.411 Y95.255 E0.03260 ; perimeter
G1 X102.244 Y95.383 E0.00972 ; perimeter
G1 X101.845 Y95.590 E0.02082 ; perimeter
G1 X101.471 Y95.828 E0.02053 ; perimeter
G1 X101.312 Y95.907 E0.00824 ; perimeter
G1 X101.121 Y95.986 E0.00958 ; perimeter
G1 X100.727 Y96.033 E0.01837 ; perimeter
G1 X100.640 Y96.066 E0.00429 ; perimeter
G1 X100.322 Y96.092 E0.01482 ; perimeter
G1 X100.505 Y95.822 F10800.000 ; move inwards before travel
G1 X100.693 Y95.794 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.386078
G1 F2400.000
G1 X101.044 Y95.564 E0.01196 ; infill
G1 X101.472 Y95.364 E0.01349 ; infill
;WIDTH:0.290986
G1 X102.031 Y95.047 E0.01325 ; infill
G1 X102.783 Y94.562 E0.01845 ; infill
G1 X103.219 Y94.436 E0.00937 ; infill
G1 X103.919 Y94.346 F10800.000 ; move to first infill point
;WIDTH:0.267634
G1 F2400.000
G1 X104.595 Y94.342 E0.01263 ; infill
G1 X105.137 Y94.404 E0.01020 ; infill
G1 X105.175 Y94.361 E0.00106 ; infill
;WIDTH:0.168403
G1 X105.254 Y94.292 E0.00109 ; infill
G1 X105.306 Y94.500 F10800.000 ; move to first infill point
;WIDTH:0.258235
G1 F2400.000
G1 X104.655 Y94.198 E0.01285 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.306 Y94.500 E-0.18935 ; wipe and retract
;WIPE_END
G1 E-2.21065 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 X99.676 Y97.043 ; move to first infill point
G1 Z18.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.310501
G1 F2400.000
G1 X99.444 Y98.271 E0.02781 ; infill
;WIDTH:0.296581
G1 X99.318 Y98.687 E0.00917 ; infill
G1 X99.145 Y99.385 E0.01516 ; infill
G1 X99.131 Y99.702 E0.00669 ; infill
G1 X99.167 Y100.074 E0.00789 ; infill
G1 X99.376 Y100.885 E0.01766 ; infill
;WIDTH:0.276362
G1 X99.532 Y101.376 E0.01000 ; infill
;WIDTH:0.235819
G1 X99.661 Y101.797 E0.00706 ; infill
;WIDTH:0.330648
G1 X99.884 Y102.584 E0.01957 ; infill
;LAYER_CHANGE
;Z:19
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;19
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.661 Y101.797 E-0.21584 ; wipe and retract
;WIPE_END
G1 E-2.18416 F2400.000 ; retract
G1 Z18.875 F10800.000 ; lift Z
G1 Z19.000 ; move to next layer (94)
;AFTER_LAYER_CHANGE
;19
G1 Z19.075 ; lift Z
G1 X101.128 Y105.668 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.386 Y105.654 E0.01195 ; perimeter
G1 X101.730 Y105.784 E0.01705 ; perimeter
G1 X101.878 Y106.050 E0.01411 ; perimeter
G1 X102.231 Y106.519 E0.02717 ; perimeter
G1 X103.144 Y107.400 E0.05878 ; perimeter
G1 X103.478 Y107.617 E0.01846 ; perimeter
G1 X103.862 Y107.810 E0.01991 ; perimeter
G1 X104.145 Y108.022 E0.01638 ; perimeter
G1 X104.308 Y108.345 E0.01674 ; perimeter
G1 X104.275 Y108.488 E0.00681 ; perimeter
G1 X104.202 Y108.569 E0.00506 ; perimeter
G1 X104.067 Y108.583 E0.00627 ; perimeter
G1 X104.011 Y108.621 E0.00315 ; perimeter
G1 X103.876 Y108.620 E0.00625 ; perimeter
G1 X103.675 Y108.588 E0.00941 ; perimeter
G1 X103.278 Y108.416 E0.02006 ; perimeter
G1 X102.959 Y108.202 E0.01777 ; perimeter
G1 X102.049 Y107.395 E0.05635 ; perimeter
G1 X101.188 Y106.575 E0.05509 ; perimeter
G1 X101.034 Y106.359 E0.01228 ; perimeter
G1 X100.969 Y106.156 E0.00989 ; perimeter
G1 X100.949 Y106.023 E0.00621 ; perimeter
G1 X101.009 Y105.799 E0.01074 ; perimeter
G1 X101.088 Y105.712 E0.00546 ; perimeter
G1 X101.335 Y105.822 F10800.000 ; move inwards before travel
G1 X101.328 Y105.898 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.392156
G1 F2400.000
G1 X101.436 Y106.159 E0.00818 ; infill
G1 X101.517 Y106.290 E0.00448 ; infill
G1 X101.799 Y106.607 E0.01231 ; infill
;WIDTH:0.283692
G1 X101.953 Y106.779 E0.00463 ; infill
G1 X102.928 Y107.691 E0.02672 ; infill
;WIDTH:0.309171
G1 X103.062 Y107.793 E0.00374 ; infill
;WIDTH:0.337293
G1 X103.292 Y107.958 E0.00692 ; infill
;WIDTH:0.351614
G1 X103.998 Y108.348 E0.02069 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.292 Y107.958 E-0.21272 ; wipe and retract
;WIPE_END
G1 E-2.18728 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X108.549 Y110.854 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.516 Y110.882 E0.00201 ; perimeter
G1 X108.311 Y110.943 E0.00990 ; perimeter
G1 X108.106 Y110.938 E0.00949 ; perimeter
G1 X107.934 Y110.879 E0.00842 ; perimeter
G1 X107.733 Y110.713 E0.01208 ; perimeter
G1 X107.646 Y110.445 E0.01307 ; perimeter
G1 X107.648 Y110.307 E0.00638 ; perimeter
G1 X107.723 Y110.196 E0.00618 ; perimeter
G1 X107.797 Y110.138 E0.00438 ; perimeter
G1 X107.993 Y110.104 E0.00921 ; perimeter
G1 X108.313 Y110.167 E0.01510 ; perimeter
G1 X108.463 Y110.252 E0.00801 ; perimeter
G1 X108.569 Y110.368 E0.00725 ; perimeter
G1 X108.628 Y110.504 E0.00688 ; perimeter
G1 X108.634 Y110.698 E0.00896 ; perimeter
G1 X108.582 Y110.804 E0.00548 ; perimeter
G1 X108.506 Y110.848 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.516 Y110.882 E-0.02704 ; wipe and retract
G1 X108.311 Y110.943 E-0.05638 ; wipe and retract
G1 X108.106 Y110.938 E-0.05406 ; wipe and retract
G1 X107.934 Y110.879 E-0.04799 ; wipe and retract
G1 X107.733 Y110.713 E-0.06880 ; wipe and retract
G1 X107.646 Y110.445 E-0.07444 ; wipe and retract
G1 X107.648 Y110.307 E-0.03635 ; wipe and retract
G1 X107.723 Y110.196 E-0.03521 ; wipe and retract
G1 X107.797 Y110.138 E-0.02494 ; wipe and retract
G1 X107.993 Y110.104 E-0.05248 ; wipe and retract
G1 X108.313 Y110.167 E-0.08601 ; wipe and retract
G1 X108.463 Y110.252 E-0.04564 ; wipe and retract
G1 X108.569 Y110.368 E-0.04133 ; wipe and retract
G1 X108.628 Y110.504 E-0.03922 ; wipe and retract
G1 X108.634 Y110.698 E-0.05107 ; wipe and retract
G1 X108.582 Y110.804 E-0.03123 ; wipe and retract
;WIPE_END
G1 E-1.62782 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X110.432 Y113.337 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.451 Y113.203 E0.00628 ; perimeter
G1 X110.540 Y113.074 E0.00728 ; perimeter
G1 X110.648 Y113.014 E0.00569 ; perimeter
G1 X110.933 Y113.007 E0.01322 ; perimeter
G1 X111.054 Y113.049 E0.00595 ; perimeter
G1 X111.225 Y113.170 E0.00967 ; perimeter
G1 X111.298 Y113.256 E0.00523 ; perimeter
G1 X111.363 Y113.366 E0.00592 ; perimeter
G1 X111.396 Y113.507 E0.00668 ; perimeter
G1 X111.389 Y113.570 E0.00293 ; perimeter
G1 X111.332 Y113.747 E0.00861 ; perimeter
G1 X111.288 Y113.794 E0.00299 ; perimeter
G1 X111.150 Y113.869 E0.00729 ; perimeter
G1 X111.042 Y113.883 E0.00504 ; perimeter
G1 X110.851 Y113.851 E0.00897 ; perimeter
G1 X110.649 Y113.732 E0.01090 ; perimeter
G1 X110.554 Y113.638 E0.00619 ; perimeter
G1 X110.460 Y113.470 E0.00892 ; perimeter
G1 X110.444 Y113.396 E0.00348 ; perimeter
G1 X110.547 Y113.265 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.451 Y113.203 E-0.05096 ; wipe and retract
G1 X110.540 Y113.074 E-0.04148 ; wipe and retract
G1 X110.648 Y113.014 E-0.03242 ; wipe and retract
G1 X110.933 Y113.007 E-0.07531 ; wipe and retract
G1 X111.054 Y113.049 E-0.03387 ; wipe and retract
G1 X111.225 Y113.170 E-0.05507 ; wipe and retract
G1 X111.298 Y113.256 E-0.02982 ; wipe and retract
G1 X111.363 Y113.366 E-0.03374 ; wipe and retract
G1 X111.396 Y113.507 E-0.03808 ; wipe and retract
G1 X111.389 Y113.570 E-0.01670 ; wipe and retract
G1 X111.332 Y113.747 E-0.04903 ; wipe and retract
G1 X111.288 Y113.794 E-0.01705 ; wipe and retract
G1 X111.150 Y113.869 E-0.04153 ; wipe and retract
G1 X111.042 Y113.883 E-0.02871 ; wipe and retract
G1 X110.851 Y113.851 E-0.05110 ; wipe and retract
G1 X110.649 Y113.732 E-0.06210 ; wipe and retract
G1 X110.554 Y113.638 E-0.03528 ; wipe and retract
G1 X110.460 Y113.470 E-0.05080 ; wipe and retract
G1 X110.444 Y113.396 E-0.01984 ; wipe and retract
;WIPE_END
G1 E-1.63709 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X113.096 Y115.691 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.165 Y115.532 E0.00801 ; perimeter
G1 X113.337 Y115.375 E0.01080 ; perimeter
G1 X114.334 Y115.252 E0.04655 ; perimeter
G1 X114.680 Y115.090 E0.01767 ; perimeter
G1 X114.877 Y114.868 E0.01380 ; perimeter
G1 X115.194 Y114.570 E0.02015 ; perimeter
G1 X115.257 Y114.533 E0.00338 ; perimeter
G1 X115.419 Y114.496 E0.00767 ; perimeter
G1 X115.548 Y114.525 E0.00614 ; perimeter
G1 X115.646 Y114.575 E0.00512 ; perimeter
G1 X115.774 Y114.716 E0.00878 ; perimeter
G1 X115.809 Y114.838 E0.00591 ; perimeter
G1 X115.815 Y114.957 E0.00548 ; perimeter
G1 X115.774 Y115.113 E0.00750 ; perimeter
G1 X115.234 Y115.794 E0.04025 ; perimeter
G1 X115.123 Y115.883 E0.00659 ; perimeter
G1 X114.910 Y115.984 E0.01093 ; perimeter
G1 X113.610 Y116.132 E0.06064 ; perimeter
G1 X113.322 Y116.091 E0.01347 ; perimeter
G1 X113.198 Y115.996 E0.00721 ; perimeter
G1 X113.096 Y115.807 E0.00994 ; perimeter
G1 X113.096 Y115.751 E0.00261 ; perimeter
G1 X113.258 Y115.630 F10800.000 ; move inwards before travel
G1 X113.478 Y115.743 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.320251
G1 F2400.000
G1 X113.507 Y115.734 E0.00070 ; infill
;WIDTH:0.35847
G1 X113.687 Y115.731 E0.00474 ; infill
G1 X114.420 Y115.643 E0.01936 ; infill
;WIDTH:0.36569
G1 X114.469 Y115.633 E0.00135 ; infill
;WIDTH:0.399844
G1 X114.574 Y115.603 E0.00322 ; infill
;WIDTH:0.433998
G1 X114.678 Y115.573 E0.00353 ; infill
;WIDTH:0.456805
G1 X114.879 Y115.497 E0.00740 ; infill
G1 X114.974 Y115.418 E0.00424 ; infill
;WIDTH:0.35072
G1 X115.418 Y114.899 E0.01747 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.974 Y115.418 E-0.18017 ; wipe and retract
;WIPE_END
G1 E-2.21983 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X115.538 Y112.017 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.402 Y112.006 E0.00629 ; perimeter
G1 X115.273 Y111.936 E0.00685 ; perimeter
G1 X115.163 Y111.776 E0.00897 ; perimeter
G1 X115.134 Y111.658 E0.00564 ; perimeter
G1 X115.192 Y111.338 E0.01505 ; perimeter
G1 X115.261 Y111.252 E0.00511 ; perimeter
G1 X115.421 Y111.180 E0.00814 ; perimeter
G1 X115.542 Y111.170 E0.00560 ; perimeter
G1 X115.661 Y111.199 E0.00568 ; perimeter
G1 X115.804 Y111.301 E0.00816 ; perimeter
G1 X115.876 Y111.428 E0.00673 ; perimeter
G1 X115.894 Y111.637 E0.00973 ; perimeter
G1 X115.862 Y111.802 E0.00779 ; perimeter
G1 X115.811 Y111.889 E0.00466 ; perimeter
G1 X115.722 Y111.962 E0.00534 ; perimeter
G1 X115.595 Y112.000 E0.00613 ; perimeter
G1 X115.459 Y111.906 F10800.000 ; move inwards before travel
G1 X115.512 Y111.527 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.289986
G1 F2400.000
G1 X115.520 Y111.546 E0.00043 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.512 Y111.527 E-0.00553 ; wipe and retract
;WIPE_END
G1 E-2.39447 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X115.553 Y105.988 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.427 Y105.985 E0.00582 ; perimeter
G1 X115.297 Y105.931 E0.00654 ; perimeter
G1 X115.231 Y105.855 E0.00464 ; perimeter
G1 X115.155 Y105.638 E0.01064 ; perimeter
G1 X115.154 Y105.460 E0.00827 ; perimeter
G1 X115.217 Y105.259 E0.00976 ; perimeter
G1 X115.369 Y105.140 E0.00894 ; perimeter
G1 X115.603 Y105.122 E0.01088 ; perimeter
G1 X115.701 Y105.152 E0.00474 ; perimeter
G1 X115.807 Y105.262 E0.00706 ; perimeter
G1 X115.872 Y105.452 E0.00933 ; perimeter
G1 X115.869 Y105.655 E0.00939 ; perimeter
G1 X115.764 Y105.890 E0.01191 ; perimeter
G1 X115.711 Y105.935 E0.00325 ; perimeter
G1 X115.609 Y105.969 E0.00495 ; perimeter
G1 X115.476 Y105.888 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.427 Y105.985 E-0.04834 ; wipe and retract
G1 X115.297 Y105.931 E-0.03727 ; wipe and retract
G1 X115.231 Y105.855 E-0.02642 ; wipe and retract
G1 X115.155 Y105.638 E-0.06060 ; wipe and retract
G1 X115.154 Y105.460 E-0.04711 ; wipe and retract
G1 X115.217 Y105.259 E-0.05558 ; wipe and retract
G1 X115.369 Y105.140 E-0.05095 ; wipe and retract
G1 X115.603 Y105.122 E-0.06196 ; wipe and retract
G1 X115.701 Y105.152 E-0.02702 ; wipe and retract
G1 X115.807 Y105.262 E-0.04023 ; wipe and retract
G1 X115.872 Y105.452 E-0.05314 ; wipe and retract
G1 X115.869 Y105.655 E-0.05351 ; wipe and retract
G1 X115.764 Y105.890 E-0.06786 ; wipe and retract
G1 X115.711 Y105.935 E-0.01851 ; wipe and retract
G1 X115.609 Y105.969 E-0.02818 ; wipe and retract
;WIPE_END
G1 E-1.72332 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X115.216 Y103.534 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.179 Y103.559 E0.00207 ; perimeter
G1 X115.076 Y103.547 E0.00479 ; perimeter
G1 X114.960 Y103.475 E0.00636 ; perimeter
G1 X114.811 Y103.311 E0.01026 ; perimeter
G1 X114.729 Y103.119 E0.00967 ; perimeter
G1 X114.667 Y103.037 E0.00474 ; perimeter
G1 X114.540 Y102.732 E0.01531 ; perimeter
G1 X114.451 Y102.251 E0.02265 ; perimeter
G1 X114.298 Y101.865 E0.01926 ; perimeter
G1 X114.017 Y101.507 E0.02107 ; perimeter
G1 X113.891 Y101.316 E0.01060 ; perimeter
G1 X113.852 Y101.204 E0.00550 ; perimeter
G1 X113.837 Y100.922 E0.01310 ; perimeter
G1 X113.909 Y100.763 E0.00806 ; perimeter
G1 X114.001 Y100.730 E0.00452 ; perimeter
G1 X114.177 Y100.728 E0.00816 ; perimeter
G1 X114.378 Y100.795 E0.00979 ; perimeter
G1 X114.598 Y100.960 E0.01274 ; perimeter
G1 X114.758 Y101.167 E0.01213 ; perimeter
G1 X114.910 Y101.481 E0.01618 ; perimeter
G1 X115.222 Y102.223 E0.03727 ; perimeter
G1 X115.325 Y102.645 E0.02013 ; perimeter
G1 X115.355 Y102.944 E0.01389 ; perimeter
G1 X115.334 Y103.197 E0.01176 ; perimeter
G1 X115.236 Y103.477 E0.01377 ; perimeter
G1 X115.173 Y103.525 F10800.000 ; move inwards before travel
G1 X115.073 Y103.214 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3279
G1 F2400.000
G1 X114.803 Y102.162 E0.02572 ; infill
;WIDTH:0.285508
G1 X114.616 Y101.700 E0.01005 ; infill
;WIDTH:0.277195
G1 X114.419 Y101.377 E0.00738 ; infill
G1 X114.216 Y101.133 E0.00618 ; infill
G1 X114.129 Y100.970 E0.00360 ; infill
G1 X115.026 Y102.436 F10800.000 ; move to first infill point
;WIDTH:0.137586
G1 F2400.000
G1 X115.053 Y103.219 E0.00616 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.026 Y102.436 E-0.20666 ; wipe and retract
;WIPE_END
G1 E-2.19334 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X112.835 Y99.443 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.579 Y99.295 E0.01372 ; perimeter
G1 X112.405 Y99.129 E0.01115 ; perimeter
G1 X112.167 Y98.818 E0.01811 ; perimeter
G1 X112.057 Y98.620 E0.01051 ; perimeter
G1 X111.940 Y98.332 E0.01441 ; perimeter
G1 X111.801 Y98.152 E0.01051 ; perimeter
G1 X111.736 Y98.000 E0.00766 ; perimeter
G1 X111.533 Y97.852 E0.01162 ; perimeter
G1 X111.413 Y97.706 E0.00880 ; perimeter
G1 X111.379 Y97.627 E0.00396 ; perimeter
G1 X111.283 Y97.498 E0.00746 ; perimeter
G1 X111.247 Y97.276 E0.01040 ; perimeter
G1 X111.283 Y97.129 E0.00700 ; perimeter
G1 X111.390 Y97.011 E0.00737 ; perimeter
G1 X111.618 Y96.965 E0.01080 ; perimeter
G1 X111.773 Y97.007 E0.00744 ; perimeter
G1 X111.942 Y97.093 E0.00881 ; perimeter
G1 X112.064 Y97.216 E0.00800 ; perimeter
G1 X112.316 Y97.605 E0.02146 ; perimeter
G1 X112.425 Y97.854 E0.01260 ; perimeter
G1 X112.516 Y97.990 E0.00756 ; perimeter
G1 X112.657 Y98.127 E0.00913 ; perimeter
G1 X112.957 Y98.627 E0.02701 ; perimeter
G1 X113.055 Y98.914 E0.01405 ; perimeter
G1 X113.083 Y99.282 E0.01709 ; perimeter
G1 X113.017 Y99.444 E0.00810 ; perimeter
G1 X112.938 Y99.466 E0.00381 ; perimeter
G1 X112.894 Y99.456 E0.00208 ; perimeter
G1 X112.784 Y99.151 F10800.000 ; move inwards before travel
G1 X112.810 Y99.150 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311147
G1 F2400.000
G1 X112.359 Y98.363 E0.02023 ; infill
G1 X112.260 Y98.216 F10800.000 ; move to first infill point
;WIDTH:0.24111
G1 F2400.000
G1 X112.238 Y98.176 E0.00076 ; infill
;WIDTH:0.229573
G1 X112.101 Y97.976 E0.00376 ; infill
G1 X112.008 Y97.770 E0.00349 ; infill
G1 X111.903 Y97.658 E0.00240 ; infill
;WIDTH:0.360526
G1 X111.711 Y97.416 E0.00815 ; infill
;WIDTH:0.344619
G1 X111.547 Y97.225 E0.00632 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.711 Y97.416 E-0.06652 ; wipe and retract
;WIPE_END
G1 E-2.33348 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X109.533 Y95.897 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.519 Y96.038 E0.00657 ; perimeter
G1 X109.376 Y96.157 E0.00864 ; perimeter
G1 X109.164 Y96.169 E0.00980 ; perimeter
G1 X108.748 Y96.088 E0.01965 ; perimeter
G1 X108.463 Y95.923 E0.01527 ; perimeter
G1 X108.416 Y95.856 E0.00377 ; perimeter
G1 X108.379 Y95.586 E0.01262 ; perimeter
G1 X108.435 Y95.402 E0.00892 ; perimeter
G1 X108.638 Y95.242 E0.01194 ; perimeter
G1 X108.884 Y95.235 E0.01140 ; perimeter
G1 X109.000 Y95.280 E0.00575 ; perimeter
G1 X109.051 Y95.333 E0.00339 ; perimeter
G1 X109.253 Y95.447 E0.01073 ; perimeter
G1 X109.400 Y95.758 E0.01595 ; perimeter
G1 X109.512 Y95.844 E0.00653 ; perimeter
G1 X109.420 Y95.982 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.519 Y96.038 E-0.05119 ; wipe and retract
G1 X109.376 Y96.157 E-0.04924 ; wipe and retract
G1 X109.164 Y96.169 E-0.05585 ; wipe and retract
G1 X108.748 Y96.088 E-0.11194 ; wipe and retract
G1 X108.463 Y95.923 E-0.08698 ; wipe and retract
G1 X108.416 Y95.856 E-0.02150 ; wipe and retract
G1 X108.379 Y95.586 E-0.07191 ; wipe and retract
G1 X108.435 Y95.402 E-0.05084 ; wipe and retract
G1 X108.638 Y95.242 E-0.06802 ; wipe and retract
G1 X108.884 Y95.235 E-0.06496 ; wipe and retract
G1 X109.000 Y95.280 E-0.03275 ; wipe and retract
G1 X109.051 Y95.333 E-0.01932 ; wipe and retract
G1 X109.253 Y95.447 E-0.06115 ; wipe and retract
G1 X109.400 Y95.758 E-0.09086 ; wipe and retract
G1 X109.512 Y95.844 E-0.03722 ; wipe and retract
;WIPE_END
G1 E-1.52627 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X105.683 Y94.565 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.491 Y94.776 E0.01324 ; perimeter
G1 X105.268 Y94.815 E0.01051 ; perimeter
G1 X103.882 Y94.655 E0.06461 ; perimeter
G1 X103.578 Y94.693 E0.01422 ; perimeter
G1 X103.179 Y94.824 E0.01942 ; perimeter
G1 X102.878 Y94.966 E0.01544 ; perimeter
G1 X102.434 Y95.231 E0.02394 ; perimeter
G1 X102.118 Y95.472 E0.01842 ; perimeter
G1 X101.951 Y95.559 E0.00873 ; perimeter
G1 X101.654 Y95.761 E0.01660 ; perimeter
G1 X101.202 Y95.972 E0.02310 ; perimeter
G1 X100.889 Y95.951 E0.01454 ; perimeter
G1 X100.692 Y95.852 E0.01025 ; perimeter
G1 X100.627 Y95.731 E0.00634 ; perimeter
G1 X100.692 Y95.447 E0.01349 ; perimeter
G1 X100.940 Y95.176 E0.01702 ; perimeter
G1 X101.333 Y95.012 E0.01972 ; perimeter
G1 X101.676 Y94.834 E0.01789 ; perimeter
G1 X102.501 Y94.322 E0.04496 ; perimeter
G1 X102.594 Y94.213 E0.00666 ; perimeter
G1 X102.799 Y94.094 E0.01098 ; perimeter
G1 X103.032 Y94.020 E0.01131 ; perimeter
G1 X103.648 Y93.958 E0.02865 ; perimeter
G1 X104.345 Y93.922 E0.03236 ; perimeter
G1 X105.374 Y94.039 E0.04798 ; perimeter
G1 X105.546 Y94.118 E0.00876 ; perimeter
G1 X105.602 Y94.192 E0.00428 ; perimeter
G1 X105.703 Y94.458 E0.01318 ; perimeter
G1 X105.694 Y94.506 E0.00225 ; perimeter
G1 X105.399 Y94.594 F10800.000 ; move inwards before travel
G1 X105.409 Y94.508 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341177
G1 F2400.000
G1 X105.268 Y94.421 E0.00411 ; infill
G1 X104.335 Y94.314 E0.02328 ; infill
G1 X104.114 Y94.307 E0.00547 ; infill
;WIDTH:0.305378
G1 X103.894 Y94.300 E0.00481 ; infill
;WIDTH:0.26858
G1 X103.509 Y94.336 E0.00725 ; infill
G1 X103.307 Y94.378 E0.00388 ; infill
;WIDTH:0.367843
G1 X103.128 Y94.416 E0.00495 ; infill
G1 X102.857 Y94.529 E0.00793 ; infill
G1 X103.330 Y94.233 F10800.000 ; move to first infill point
;WIDTH:0.321574
G1 F2400.000
G1 X102.730 Y94.621 E0.01657 ; infill
;WIDTH:0.310199
G1 X102.233 Y94.922 E0.01290 ; infill
;WIDTH:0.298598
G1 X101.910 Y95.144 E0.00835 ; infill
G1 X101.498 Y95.380 E0.01009 ; infill
G1 X101.141 Y95.553 E0.00843 ; infill
G1 X100.885 Y95.652 E0.00583 ; infill
G1 X100.905 Y95.689 F10800.000 ; move to first infill point
;WIDTH:0.226978
G1 F2400.000
G1 X101.228 Y95.430 E0.00634 ; infill
;WIDTH:0.252751
G1 X101.551 Y95.170 E0.00723 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.228 Y95.430 E-0.10935 ; wipe and retract
;WIPE_END
G1 E-2.29065 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 X99.573 Y97.011 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.669 Y96.971 E0.00485 ; perimeter
G1 X99.787 Y97.017 E0.00586 ; perimeter
G1 X99.897 Y97.198 E0.00979 ; perimeter
G1 X99.951 Y97.384 E0.00898 ; perimeter
G1 X99.980 Y97.679 E0.01376 ; perimeter
G1 X99.916 Y98.071 E0.01838 ; perimeter
G1 X99.839 Y98.360 E0.01387 ; perimeter
G1 X99.455 Y99.450 E0.05352 ; perimeter
G1 X99.455 Y99.972 E0.02417 ; perimeter
G1 X99.595 Y100.343 E0.01839 ; perimeter
G1 X99.675 Y100.661 E0.01520 ; perimeter
G1 X100.139 Y101.881 E0.06043 ; perimeter
G1 X100.177 Y102.111 E0.01080 ; perimeter
G1 X100.169 Y102.271 E0.00744 ; perimeter
G1 X100.087 Y102.492 E0.01093 ; perimeter
G1 X100.014 Y102.584 E0.00541 ; perimeter
G1 X99.933 Y102.632 E0.00438 ; perimeter
G1 X99.783 Y102.635 E0.00693 ; perimeter
G1 X99.604 Y102.542 E0.00934 ; perimeter
G1 X99.435 Y102.357 E0.01164 ; perimeter
G1 X99.356 Y102.170 E0.00939 ; perimeter
G1 X99.271 Y101.871 E0.01442 ; perimeter
G1 X99.224 Y101.604 E0.01254 ; perimeter
G1 X99.096 Y101.236 E0.01806 ; perimeter
G1 X98.976 Y100.793 E0.02126 ; perimeter
G1 X98.873 Y100.092 E0.03283 ; perimeter
G1 X98.867 Y99.223 E0.04025 ; perimeter
G1 X98.926 Y98.741 E0.02251 ; perimeter
G1 X99.038 Y98.241 E0.02370 ; perimeter
G1 X99.087 Y98.101 E0.00686 ; perimeter
G1 X99.217 Y97.435 E0.03147 ; perimeter
G1 X99.309 Y97.252 E0.00946 ; perimeter
G1 X99.412 Y97.116 E0.00792 ; perimeter
G1 X99.522 Y97.044 E0.00612 ; perimeter
G1 X99.663 Y97.065 F10800.000 ; move inwards before travel
G1 X99.571 Y97.705 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.36876
G1 F2400.000
G1 X99.472 Y98.194 E0.01350 ; infill
;WIDTH:0.353963
G1 X99.356 Y98.577 E0.01035 ; infill
;WIDTH:0.327394
G1 X99.291 Y98.804 E0.00558 ; infill
;WIDTH:0.299467
G1 X99.239 Y99.023 E0.00480 ; infill
;WIDTH:0.250962
G1 X99.188 Y99.241 E0.00389 ; infill
;WIDTH:0.202458
G1 X99.175 Y99.316 E0.00100 ; infill
;WIDTH:0.176437
G1 X99.163 Y99.391 E0.00084 ; infill
;WIDTH:0.150416
G1 X99.164 Y100.015 E0.00559 ; infill
G1 X99.219 Y100.259 E0.00223 ; infill
;WIDTH:0.251095
G1 X99.339 Y100.774 E0.00915 ; infill
G1 X99.595 Y101.518 E0.01362 ; infill
;WIDTH:0.346564
G1 X99.761 Y102.085 E0.01490 ; infill
;LAYER_CHANGE
;Z:19.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;19.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.595 Y101.518 E-0.15571 ; wipe and retract
;WIPE_END
G1 E-2.24429 F2400.000 ; retract
G1 Z19.075 F10800.000 ; lift Z
G1 Z19.200 ; move to next layer (95)
;AFTER_LAYER_CHANGE
;19.2
G1 Z19.275 ; lift Z
G1 X101.061 Y105.567 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.275 Y105.560 E0.00993 ; perimeter
G1 X101.344 Y105.583 E0.00340 ; perimeter
G1 X101.573 Y105.739 E0.01283 ; perimeter
G1 X101.647 Y105.766 E0.00364 ; perimeter
G1 X101.735 Y105.850 E0.00564 ; perimeter
G1 X101.815 Y106.005 E0.00807 ; perimeter
G1 X102.171 Y106.449 E0.02635 ; perimeter
G1 X103.083 Y107.340 E0.05910 ; perimeter
G1 X103.794 Y107.753 E0.03806 ; perimeter
G1 X104.018 Y107.937 E0.01342 ; perimeter
G1 X104.145 Y108.239 E0.01517 ; perimeter
G1 X104.151 Y108.376 E0.00638 ; perimeter
G1 X104.096 Y108.436 E0.00377 ; perimeter
G1 X103.956 Y108.530 E0.00780 ; perimeter
G1 X103.744 Y108.546 E0.00985 ; perimeter
G1 X103.506 Y108.508 E0.01115 ; perimeter
G1 X103.278 Y108.421 E0.01131 ; perimeter
G1 X102.966 Y108.216 E0.01732 ; perimeter
G1 X102.369 Y107.695 E0.03669 ; perimeter
G1 X101.746 Y107.100 E0.03993 ; perimeter
G1 X101.409 Y106.808 E0.02064 ; perimeter
G1 X101.017 Y106.361 E0.02752 ; perimeter
G1 X100.934 Y106.215 E0.00781 ; perimeter
G1 X100.891 Y105.935 E0.01309 ; perimeter
G1 X101.022 Y105.614 E0.01609 ; perimeter
G1 X101.242 Y105.682 F10800.000 ; move inwards before travel
G1 X101.393 Y106.136 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.406787
G1 F2400.000
G1 X101.695 Y106.512 E0.01460 ; infill
;WIDTH:0.298959
G1 X102.872 Y107.644 E0.03477 ; infill
;WIDTH:0.33897
G1 X103.043 Y107.767 E0.00517 ; infill
;WIDTH:0.379224
G1 X103.469 Y108.047 E0.01427 ; infill
G1 X103.904 Y108.290 E0.01392 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.469 Y108.047 E-0.13132 ; wipe and retract
G1 X103.043 Y107.767 E-0.13463 ; wipe and retract
;WIPE_END
G1 E-2.13405 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X107.751 Y110.519 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.779 Y110.349 E0.00795 ; perimeter
G1 X107.822 Y110.270 E0.00418 ; perimeter
G1 X107.921 Y110.198 E0.00564 ; perimeter
G1 X108.139 Y110.161 E0.01026 ; perimeter
G1 X108.366 Y110.193 E0.01062 ; perimeter
G1 X108.583 Y110.313 E0.01149 ; perimeter
G1 X108.676 Y110.419 E0.00650 ; perimeter
G1 X108.729 Y110.544 E0.00631 ; perimeter
G1 X108.743 Y110.710 E0.00773 ; perimeter
G1 X108.721 Y110.795 E0.00408 ; perimeter
G1 X108.617 Y110.932 E0.00794 ; perimeter
G1 X108.467 Y110.987 E0.00743 ; perimeter
G1 X108.197 Y110.984 E0.01250 ; perimeter
G1 X108.055 Y110.934 E0.00695 ; perimeter
G1 X107.842 Y110.759 E0.01278 ; perimeter
G1 X107.771 Y110.575 E0.00914 ; perimeter
G1 X107.890 Y110.418 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.779 Y110.349 E-0.05955 ; wipe and retract
G1 X107.822 Y110.270 E-0.02381 ; wipe and retract
G1 X107.921 Y110.198 E-0.03215 ; wipe and retract
G1 X108.139 Y110.161 E-0.05847 ; wipe and retract
G1 X108.366 Y110.193 E-0.06049 ; wipe and retract
G1 X108.583 Y110.313 E-0.06547 ; wipe and retract
G1 X108.676 Y110.419 E-0.03703 ; wipe and retract
G1 X108.729 Y110.544 E-0.03592 ; wipe and retract
G1 X108.743 Y110.710 E-0.04404 ; wipe and retract
G1 X108.721 Y110.795 E-0.02323 ; wipe and retract
G1 X108.617 Y110.932 E-0.04523 ; wipe and retract
G1 X108.467 Y110.987 E-0.04232 ; wipe and retract
G1 X108.197 Y110.984 E-0.07122 ; wipe and retract
G1 X108.055 Y110.934 E-0.03959 ; wipe and retract
G1 X107.842 Y110.759 E-0.07280 ; wipe and retract
G1 X107.771 Y110.575 E-0.05205 ; wipe and retract
;WIPE_END
G1 E-1.63663 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X110.554 Y113.268 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.649 Y113.131 E0.00769 ; perimeter
G1 X110.776 Y113.075 E0.00646 ; perimeter
G1 X111.044 Y113.078 E0.01241 ; perimeter
G1 X111.276 Y113.200 E0.01211 ; perimeter
G1 X111.444 Y113.405 E0.01231 ; perimeter
G1 X111.484 Y113.588 E0.00865 ; perimeter
G1 X111.423 Y113.823 E0.01127 ; perimeter
G1 X111.283 Y113.926 E0.00807 ; perimeter
G1 X111.138 Y113.953 E0.00681 ; perimeter
G1 X110.966 Y113.928 E0.00808 ; perimeter
G1 X110.789 Y113.841 E0.00914 ; perimeter
G1 X110.658 Y113.720 E0.00826 ; perimeter
G1 X110.558 Y113.545 E0.00935 ; perimeter
G1 X110.530 Y113.416 E0.00610 ; perimeter
G1 X110.545 Y113.327 E0.00419 ; perimeter
G1 X110.719 Y113.247 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.649 Y113.131 E-0.05853 ; wipe and retract
G1 X110.776 Y113.075 E-0.03678 ; wipe and retract
G1 X111.044 Y113.078 E-0.07070 ; wipe and retract
G1 X111.276 Y113.200 E-0.06902 ; wipe and retract
G1 X111.444 Y113.405 E-0.07012 ; wipe and retract
G1 X111.484 Y113.588 E-0.04929 ; wipe and retract
G1 X111.423 Y113.823 E-0.06420 ; wipe and retract
G1 X111.283 Y113.926 E-0.04595 ; wipe and retract
G1 X111.138 Y113.953 E-0.03880 ; wipe and retract
G1 X110.966 Y113.928 E-0.04605 ; wipe and retract
G1 X110.789 Y113.841 E-0.05207 ; wipe and retract
G1 X110.658 Y113.720 E-0.04706 ; wipe and retract
G1 X110.558 Y113.545 E-0.05329 ; wipe and retract
G1 X110.530 Y113.416 E-0.03473 ; wipe and retract
G1 X110.545 Y113.327 E-0.02384 ; wipe and retract
;WIPE_END
G1 E-1.63956 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X113.171 Y115.576 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.220 Y115.496 E0.00436 ; perimeter
G1 X113.409 Y115.359 E0.01080 ; perimeter
G1 X113.828 Y115.282 E0.01973 ; perimeter
G1 X113.955 Y115.290 E0.00589 ; perimeter
G1 X114.344 Y115.220 E0.01829 ; perimeter
G1 X114.666 Y115.088 E0.01612 ; perimeter
G1 X115.168 Y114.590 E0.03279 ; perimeter
G1 X115.247 Y114.544 E0.00424 ; perimeter
G1 X115.401 Y114.497 E0.00743 ; perimeter
G1 X115.523 Y114.523 E0.00577 ; perimeter
G1 X115.687 Y114.619 E0.00882 ; perimeter
G1 X115.769 Y114.723 E0.00613 ; perimeter
G1 X115.812 Y114.949 E0.01065 ; perimeter
G1 X115.758 Y115.133 E0.00887 ; perimeter
G1 X115.248 Y115.782 E0.03823 ; perimeter
G1 X115.079 Y115.906 E0.00975 ; perimeter
G1 X114.913 Y115.983 E0.00845 ; perimeter
G1 X113.753 Y116.124 E0.05413 ; perimeter
G1 X113.401 Y116.085 E0.01640 ; perimeter
G1 X113.269 Y115.989 E0.00756 ; perimeter
G1 X113.157 Y115.762 E0.01170 ; perimeter
G1 X113.153 Y115.633 E0.00602 ; perimeter
G1 X113.263 Y115.554 F10800.000 ; move inwards before travel
G1 X113.423 Y115.756 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323866
G1 F2400.000
G1 X113.563 Y115.719 E0.00339 ; infill
;WIDTH:0.351389
G1 X113.657 Y115.715 E0.00242 ; infill
;WIDTH:0.365604
G1 X113.997 Y115.690 E0.00915 ; infill
;WIDTH:0.394672
G1 X114.478 Y115.616 E0.01424 ; infill
;WIDTH:0.437245
G1 X114.632 Y115.576 E0.00522 ; infill
;WIDTH:0.477063
G1 X114.882 Y115.489 E0.00954 ; infill
;WIDTH:0.374427
G1 X114.947 Y115.440 E0.00225 ; infill
G1 X115.405 Y114.917 E0.01917 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.947 Y115.440 E-0.18353 ; wipe and retract
G1 X114.882 Y115.489 E-0.02155 ; wipe and retract
;WIPE_END
G1 E-2.19492 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X115.410 Y111.956 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.280 Y111.891 E0.00674 ; perimeter
G1 X115.155 Y111.704 E0.01041 ; perimeter
G1 X115.134 Y111.525 E0.00836 ; perimeter
G1 X115.166 Y111.349 E0.00825 ; perimeter
G1 X115.259 Y111.201 E0.00815 ; perimeter
G1 X115.413 Y111.130 E0.00784 ; perimeter
G1 X115.544 Y111.120 E0.00608 ; perimeter
G1 X115.637 Y111.143 E0.00442 ; perimeter
G1 X115.796 Y111.242 E0.00868 ; perimeter
G1 X115.875 Y111.374 E0.00714 ; perimeter
G1 X115.897 Y111.556 E0.00846 ; perimeter
G1 X115.866 Y111.741 E0.00868 ; perimeter
G1 X115.811 Y111.835 E0.00506 ; perimeter
G1 X115.719 Y111.912 E0.00555 ; perimeter
G1 X115.510 Y111.970 E0.01005 ; perimeter
G1 X115.469 Y111.964 E0.00189 ; perimeter
G1 X115.372 Y111.816 F10800.000 ; move inwards before travel
G1 X115.516 Y111.507 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318144
G1 F2400.000
G1 X115.512 Y111.557 E0.00117 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.516 Y111.507 E-0.01346 ; wipe and retract
;WIPE_END
G1 E-2.38654 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X115.562 Y106.058 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.426 Y106.055 E0.00630 ; perimeter
G1 X115.295 Y105.999 E0.00656 ; perimeter
G1 X115.220 Y105.907 E0.00554 ; perimeter
G1 X115.156 Y105.707 E0.00971 ; perimeter
G1 X115.155 Y105.523 E0.00851 ; perimeter
G1 X115.212 Y105.345 E0.00867 ; perimeter
G1 X115.242 Y105.300 E0.00252 ; perimeter
G1 X115.353 Y105.219 E0.00636 ; perimeter
G1 X115.587 Y105.193 E0.01088 ; perimeter
G1 X115.706 Y105.231 E0.00579 ; perimeter
G1 X115.801 Y105.327 E0.00624 ; perimeter
G1 X115.873 Y105.536 E0.01025 ; perimeter
G1 X115.868 Y105.732 E0.00912 ; perimeter
G1 X115.791 Y105.916 E0.00923 ; perimeter
G1 X115.682 Y106.025 E0.00713 ; perimeter
G1 X115.620 Y106.042 E0.00299 ; perimeter
G1 X115.475 Y105.953 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.426 Y106.055 E-0.05129 ; wipe and retract
G1 X115.295 Y105.999 E-0.03735 ; wipe and retract
G1 X115.220 Y105.907 E-0.03156 ; wipe and retract
G1 X115.156 Y105.707 E-0.05531 ; wipe and retract
G1 X115.155 Y105.523 E-0.04850 ; wipe and retract
G1 X115.212 Y105.345 E-0.04941 ; wipe and retract
G1 X115.242 Y105.300 E-0.01434 ; wipe and retract
G1 X115.353 Y105.219 E-0.03624 ; wipe and retract
G1 X115.587 Y105.193 E-0.06200 ; wipe and retract
G1 X115.706 Y105.231 E-0.03300 ; wipe and retract
G1 X115.801 Y105.327 E-0.03553 ; wipe and retract
G1 X115.873 Y105.536 E-0.05837 ; wipe and retract
G1 X115.868 Y105.732 E-0.05194 ; wipe and retract
G1 X115.791 Y105.916 E-0.05256 ; wipe and retract
G1 X115.682 Y106.025 E-0.04061 ; wipe and retract
G1 X115.620 Y106.042 E-0.01704 ; wipe and retract
;WIPE_END
G1 E-1.72493 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X114.497 Y100.909 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.746 Y101.120 E0.01509 ; perimeter
G1 X114.982 Y101.517 E0.02138 ; perimeter
G1 X115.147 Y101.915 E0.01997 ; perimeter
G1 X115.263 Y102.405 E0.02332 ; perimeter
G1 X115.272 Y102.669 E0.01226 ; perimeter
G1 X115.211 Y103.068 E0.01867 ; perimeter
G1 X115.098 Y103.236 E0.00939 ; perimeter
G1 X114.923 Y103.183 E0.00849 ; perimeter
G1 X114.794 Y103.056 E0.00840 ; perimeter
G1 X114.764 Y102.986 E0.00349 ; perimeter
G1 X114.650 Y102.835 E0.00879 ; perimeter
G1 X114.460 Y102.432 E0.02064 ; perimeter
G1 X114.415 Y102.185 E0.01161 ; perimeter
G1 X114.323 Y101.953 E0.01156 ; perimeter
G1 X114.177 Y101.768 E0.01091 ; perimeter
G1 X114.091 Y101.609 E0.00838 ; perimeter
G1 X114.058 Y101.474 E0.00646 ; perimeter
G1 X113.972 Y101.360 E0.00659 ; perimeter
G1 X113.943 Y101.274 E0.00422 ; perimeter
G1 X113.936 Y101.076 E0.00917 ; perimeter
G1 X113.973 Y100.970 E0.00522 ; perimeter
G1 X114.015 Y100.913 E0.00325 ; perimeter
G1 X114.151 Y100.847 E0.00703 ; perimeter
G1 X114.281 Y100.852 E0.00602 ; perimeter
G1 X114.439 Y100.894 E0.00759 ; perimeter
G1 X114.496 Y101.235 F10800.000 ; move inwards before travel
G1 X114.193 Y101.094 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.294353
G1 F2400.000
G1 X114.380 Y101.291 E0.00568 ; infill
;WIDTH:0.317607
G1 X114.414 Y101.335 E0.00125 ; infill
;WIDTH:0.349208
G1 X114.441 Y101.378 E0.00130 ; infill
;WIDTH:0.379629
G1 X114.521 Y101.543 E0.00512 ; infill
G1 X114.626 Y101.695 E0.00519 ; infill
;WIDTH:0.283462
G1 X114.775 Y102.035 E0.00743 ; infill
G1 X114.997 Y102.871 E0.01729 ; infill
G1 X114.805 Y101.719 F10800.000 ; move to first infill point
;WIDTH:0.155734
G1 F2400.000
G1 X114.496 Y101.408 E0.00411 ; infill
;WIDTH:0.129023
G1 X114.186 Y101.098 E0.00314 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.496 Y101.408 E-0.11566 ; wipe and retract
;WIPE_END
G1 E-2.28434 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X112.659 Y99.146 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.450 Y99.041 E0.01085 ; perimeter
G1 X112.275 Y98.890 E0.01069 ; perimeter
G1 X112.016 Y98.561 E0.01939 ; perimeter
G1 X111.933 Y98.387 E0.00892 ; perimeter
G1 X111.645 Y97.979 E0.02317 ; perimeter
G1 X111.447 Y97.737 E0.01448 ; perimeter
G1 X111.352 Y97.546 E0.00989 ; perimeter
G1 X111.329 Y97.399 E0.00689 ; perimeter
G1 X111.365 Y97.239 E0.00758 ; perimeter
G1 X111.534 Y97.068 E0.01115 ; perimeter
G1 X111.734 Y97.044 E0.00929 ; perimeter
G1 X112.020 Y97.168 E0.01447 ; perimeter
G1 X112.103 Y97.244 E0.00519 ; perimeter
G1 X112.487 Y97.833 E0.03258 ; perimeter
G1 X112.782 Y98.330 E0.02678 ; perimeter
G1 X112.903 Y98.704 E0.01821 ; perimeter
G1 X112.925 Y98.962 E0.01199 ; perimeter
G1 X112.899 Y99.068 E0.00504 ; perimeter
G1 X112.848 Y99.144 E0.00425 ; perimeter
G1 X112.719 Y99.146 E0.00598 ; perimeter
G1 X112.586 Y98.924 F10800.000 ; move inwards before travel
G1 X112.640 Y98.867 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.280712
G1 F2400.000
G1 X112.255 Y98.185 E0.01548 ; infill
G1 X111.954 Y97.736 E0.01069 ; infill
;WIDTH:0.375972
G1 X111.793 Y97.512 E0.00764 ; infill
G1 X111.846 Y97.449 E0.00231 ; infill
;WIDTH:0.347922
G1 X111.900 Y97.385 E0.00211 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.846 Y97.449 E-0.02200 ; wipe and retract
;WIPE_END
G1 E-2.37800 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X108.588 Y95.204 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.653 Y95.174 E0.00332 ; perimeter
G1 X108.866 Y95.176 E0.00988 ; perimeter
G1 X109.003 Y95.236 E0.00692 ; perimeter
G1 X109.118 Y95.352 E0.00756 ; perimeter
G1 X109.197 Y95.403 E0.00437 ; perimeter
G1 X109.311 Y95.637 E0.01207 ; perimeter
G1 X109.275 Y95.756 E0.00576 ; perimeter
G1 X109.289 Y95.960 E0.00944 ; perimeter
G1 X109.269 Y95.978 E0.00129 ; perimeter
G1 X109.185 Y96.032 E0.00458 ; perimeter
G1 X109.013 Y96.072 E0.00821 ; perimeter
G1 X108.725 Y96.021 E0.01354 ; perimeter
G1 X108.508 Y95.896 E0.01161 ; perimeter
G1 X108.423 Y95.801 E0.00589 ; perimeter
G1 X108.377 Y95.592 E0.00993 ; perimeter
G1 X108.431 Y95.432 E0.00783 ; perimeter
G1 X108.441 Y95.323 E0.00504 ; perimeter
G1 X108.541 Y95.242 E0.00600 ; perimeter
G1 X108.653 Y95.235 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.653 Y95.174 E-0.03448 ; wipe and retract
G1 X108.866 Y95.176 E-0.05628 ; wipe and retract
G1 X109.003 Y95.236 E-0.03941 ; wipe and retract
G1 X109.118 Y95.352 E-0.04307 ; wipe and retract
G1 X109.197 Y95.403 E-0.02487 ; wipe and retract
G1 X109.311 Y95.637 E-0.06875 ; wipe and retract
G1 X109.275 Y95.756 E-0.03284 ; wipe and retract
G1 X109.289 Y95.960 E-0.05376 ; wipe and retract
G1 X109.269 Y95.978 E-0.00732 ; wipe and retract
G1 X109.185 Y96.032 E-0.02607 ; wipe and retract
G1 X109.013 Y96.072 E-0.04679 ; wipe and retract
G1 X108.725 Y96.021 E-0.07712 ; wipe and retract
G1 X108.508 Y95.896 E-0.06612 ; wipe and retract
G1 X108.423 Y95.801 E-0.03356 ; wipe and retract
G1 X108.377 Y95.592 E-0.05657 ; wipe and retract
G1 X108.431 Y95.432 E-0.04461 ; wipe and retract
G1 X108.441 Y95.323 E-0.02873 ; wipe and retract
G1 X108.541 Y95.242 E-0.03418 ; wipe and retract
;WIPE_END
G1 E-1.62548 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X105.807 Y94.576 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.710 Y94.706 E0.00752 ; perimeter
G1 X105.579 Y94.774 E0.00683 ; perimeter
G1 X105.550 Y94.811 E0.00221 ; perimeter
G1 X105.335 Y94.831 E0.00996 ; perimeter
G1 X104.128 Y94.668 E0.05644 ; perimeter
G1 X103.339 Y94.767 E0.03681 ; perimeter
G1 X102.768 Y94.926 E0.02747 ; perimeter
G1 X102.391 Y95.167 E0.02072 ; perimeter
G1 X102.209 Y95.368 E0.01257 ; perimeter
G1 X101.960 Y95.584 E0.01525 ; perimeter
G1 X101.718 Y95.749 E0.01357 ; perimeter
G1 X101.375 Y95.924 E0.01783 ; perimeter
G1 X101.215 Y95.976 E0.00782 ; perimeter
G1 X101.077 Y95.960 E0.00644 ; perimeter
G1 X100.946 Y95.894 E0.00680 ; perimeter
G1 X100.851 Y95.877 E0.00445 ; perimeter
G1 X100.816 Y95.845 E0.00221 ; perimeter
G1 X100.780 Y95.649 E0.00922 ; perimeter
G1 X100.829 Y95.356 E0.01376 ; perimeter
G1 X100.974 Y95.187 E0.01031 ; perimeter
G1 X101.800 Y94.828 E0.04171 ; perimeter
G1 X101.930 Y94.749 E0.00704 ; perimeter
G1 X102.247 Y94.629 E0.01574 ; perimeter
G1 X102.406 Y94.446 E0.01122 ; perimeter
G1 X102.573 Y94.340 E0.00917 ; perimeter
G1 X102.747 Y94.137 E0.01239 ; perimeter
G1 X103.109 Y93.955 E0.01876 ; perimeter
G1 X103.611 Y93.918 E0.02332 ; perimeter
G1 X104.259 Y93.909 E0.03002 ; perimeter
G1 X105.481 Y94.051 E0.05697 ; perimeter
G1 X105.647 Y94.123 E0.00839 ; perimeter
G1 X105.759 Y94.243 E0.00758 ; perimeter
G1 X105.833 Y94.460 E0.01064 ; perimeter
G1 X105.820 Y94.517 E0.00272 ; perimeter
G1 X105.646 Y94.599 F10800.000 ; move inwards before travel
G1 X105.578 Y94.458 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316886
G1 F2400.000
G1 X104.112 Y94.289 E0.03362 ; infill
G1 X103.208 Y94.368 E0.02067 ; infill
G1 X102.569 Y94.628 E0.01573 ; infill
G1 X102.266 Y94.879 F10800.000 ; move to first infill point
;WIDTH:0.242977
G1 F2400.000
G1 X101.970 Y95.123 E0.00639 ; infill
G1 X101.725 Y95.279 E0.00482 ; infill
;WIDTH:0.375157
G1 X101.228 Y95.531 E0.01539 ; infill
G1 X101.199 Y95.562 E0.00117 ; infill
;WIDTH:0.358474
G1 X101.182 Y95.581 E0.00068 ; infill
;WIDTH:0.331575
G1 X101.177 Y95.655 E0.00177 ; infill
;WIDTH:0.295047
G1 X101.171 Y95.728 E0.00155 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.177 Y95.655 E-0.01946 ; wipe and retract
;WIPE_END
G1 E-2.38054 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 X99.779 Y97.210 ; move to first perimeter point
G1 Z19.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.944 Y97.431 E0.01273 ; perimeter
G1 X100.009 Y97.656 E0.01088 ; perimeter
G1 X99.947 Y98.047 E0.01834 ; perimeter
G1 X99.808 Y98.430 E0.01890 ; perimeter
G1 X99.637 Y98.739 E0.01636 ; perimeter
G1 X99.365 Y99.305 E0.02908 ; perimeter
G1 X99.245 Y99.723 E0.02011 ; perimeter
G1 X99.390 Y100.189 E0.02260 ; perimeter
G1 X99.435 Y100.227 E0.00274 ; perimeter
G1 X99.781 Y100.965 E0.03775 ; perimeter
G1 X99.905 Y101.311 E0.01701 ; perimeter
G1 X100.029 Y101.459 E0.00896 ; perimeter
G1 X100.148 Y101.792 E0.01638 ; perimeter
G1 X100.183 Y101.996 E0.00956 ; perimeter
G1 X100.166 Y102.062 E0.00317 ; perimeter
G1 X100.068 Y102.206 E0.00808 ; perimeter
G1 X99.987 Y102.385 E0.00911 ; perimeter
G1 X99.872 Y102.458 E0.00633 ; perimeter
G1 X99.735 Y102.462 E0.00632 ; perimeter
G1 X99.509 Y102.333 E0.01207 ; perimeter
G1 X99.425 Y102.250 E0.00548 ; perimeter
G1 X99.331 Y102.053 E0.01008 ; perimeter
G1 X99.196 Y101.577 E0.02292 ; perimeter
G1 X99.086 Y101.033 E0.02575 ; perimeter
G1 X99.022 Y100.591 E0.02067 ; perimeter
G1 X99.053 Y100.066 E0.02438 ; perimeter
G1 X99.006 Y99.246 E0.03804 ; perimeter
G1 X99.019 Y98.813 E0.02003 ; perimeter
G1 X99.001 Y98.716 E0.00457 ; perimeter
G1 X99.119 Y97.963 E0.03533 ; perimeter
G1 X99.227 Y97.498 E0.02210 ; perimeter
G1 X99.330 Y97.346 E0.00848 ; perimeter
G1 X99.437 Y97.232 E0.00726 ; perimeter
G1 X99.591 Y97.169 E0.00771 ; perimeter
G1 X99.727 Y97.183 E0.00633 ; perimeter
G1 X99.759 Y97.484 F10800.000 ; move inwards before travel
G1 X99.591 Y97.429 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.365691
G1 F2400.000
G1 X99.598 Y97.682 E0.00678 ; infill
G1 X99.458 Y98.271 E0.01626 ; infill
;WIDTH:0.326813
G1 X99.422 Y98.377 E0.00264 ; infill
;WIDTH:0.287904
G1 X99.386 Y98.483 E0.00228 ; infill
;WIDTH:0.248995
G1 X99.349 Y98.588 E0.00191 ; infill
;WIDTH:0.210087
G1 X99.261 Y98.872 E0.00413 ; infill
G1 X99.288 Y100.529 F10800.000 ; move to first infill point
;WIDTH:0.108828
G1 F2400.000
G1 X99.297 Y100.579 E0.00028 ; infill
;WIDTH:0.149273
G1 X99.337 Y100.711 E0.00122 ; infill
;WIDTH:0.189717
G1 X99.377 Y100.843 E0.00168 ; infill
;WIDTH:0.230161
G1 X99.416 Y100.975 E0.00215 ; infill
;WIDTH:0.261135
G1 X99.457 Y101.099 E0.00235 ; infill
;WIDTH:0.290339
G1 X99.511 Y101.293 E0.00414 ; infill
;WIDTH:0.31973
G1 X99.565 Y101.488 E0.00467 ; infill
;WIDTH:0.33624
G1 X99.844 Y102.115 E0.01674 ; infill
;LAYER_CHANGE
;Z:19.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;19.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.565 Y101.488 E-0.18115 ; wipe and retract
;WIPE_END
G1 E-2.21885 F2400.000 ; retract
G1 Z19.275 F10800.000 ; lift Z
G1 Z19.400 ; move to next layer (96)
;AFTER_LAYER_CHANGE
;19.4
G1 Z19.475 ; lift Z
G1 X107.859 Y110.511 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.911 Y110.351 E0.00779 ; perimeter
G1 X108.067 Y110.242 E0.00880 ; perimeter
G1 X108.229 Y110.206 E0.00771 ; perimeter
G1 X108.426 Y110.228 E0.00916 ; perimeter
G1 X108.627 Y110.312 E0.01008 ; perimeter
G1 X108.781 Y110.466 E0.01013 ; perimeter
G1 X108.837 Y110.598 E0.00663 ; perimeter
G1 X108.841 Y110.798 E0.00925 ; perimeter
G1 X108.762 Y110.944 E0.00771 ; perimeter
G1 X108.722 Y110.980 E0.00246 ; perimeter
G1 X108.584 Y111.034 E0.00691 ; perimeter
G1 X108.459 Y111.047 E0.00579 ; perimeter
G1 X108.276 Y111.025 E0.00855 ; perimeter
G1 X108.178 Y110.990 E0.00481 ; perimeter
G1 X107.955 Y110.824 E0.01288 ; perimeter
G1 X107.858 Y110.570 E0.01258 ; perimeter
G1 X108.005 Y110.428 F10800.000 ; move inwards before travel
G1 X108.427 Y110.651 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35659
G1 F2400.000
G1 X108.369 Y110.635 E0.00158 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.427 Y110.651 E-0.01594 ; wipe and retract
;WIPE_END
G1 E-2.38406 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X110.737 Y113.202 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.904 Y113.136 E0.00829 ; perimeter
G1 X111.125 Y113.147 E0.01027 ; perimeter
G1 X111.371 Y113.263 E0.01256 ; perimeter
G1 X111.529 Y113.463 E0.01183 ; perimeter
G1 X111.577 Y113.692 E0.01082 ; perimeter
G1 X111.521 Y113.893 E0.00966 ; perimeter
G1 X111.403 Y113.990 E0.00708 ; perimeter
G1 X111.238 Y114.024 E0.00782 ; perimeter
G1 X111.091 Y114.008 E0.00685 ; perimeter
G1 X110.894 Y113.919 E0.01004 ; perimeter
G1 X110.797 Y113.837 E0.00585 ; perimeter
G1 X110.660 Y113.631 E0.01149 ; perimeter
G1 X110.627 Y113.468 E0.00769 ; perimeter
G1 X110.655 Y113.319 E0.00704 ; perimeter
G1 X110.703 Y113.251 E0.00385 ; perimeter
G1 X110.902 Y113.272 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.904 Y113.136 E-0.06107 ; wipe and retract
G1 X111.125 Y113.147 E-0.05853 ; wipe and retract
G1 X111.371 Y113.263 E-0.07157 ; wipe and retract
G1 X111.529 Y113.463 E-0.06742 ; wipe and retract
G1 X111.577 Y113.692 E-0.06162 ; wipe and retract
G1 X111.521 Y113.893 E-0.05505 ; wipe and retract
G1 X111.403 Y113.990 E-0.04031 ; wipe and retract
G1 X111.238 Y114.024 E-0.04453 ; wipe and retract
G1 X111.091 Y114.008 E-0.03902 ; wipe and retract
G1 X110.894 Y113.919 E-0.05717 ; wipe and retract
G1 X110.797 Y113.837 E-0.03330 ; wipe and retract
G1 X110.660 Y113.631 E-0.06548 ; wipe and retract
G1 X110.627 Y113.468 E-0.04380 ; wipe and retract
G1 X110.655 Y113.319 E-0.04010 ; wipe and retract
G1 X110.703 Y113.251 E-0.02194 ; wipe and retract
;WIPE_END
G1 E-1.63909 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X113.287 Y115.429 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.414 Y115.318 E0.00778 ; perimeter
G1 X113.739 Y115.259 E0.01533 ; perimeter
G1 X113.918 Y115.290 E0.00841 ; perimeter
G1 X114.287 Y115.236 E0.01727 ; perimeter
G1 X114.665 Y115.076 E0.01903 ; perimeter
G1 X115.152 Y114.603 E0.03144 ; perimeter
G1 X115.362 Y114.507 E0.01070 ; perimeter
G1 X115.429 Y114.504 E0.00311 ; perimeter
G1 X115.523 Y114.531 E0.00451 ; perimeter
G1 X115.636 Y114.588 E0.00585 ; perimeter
G1 X115.719 Y114.661 E0.00513 ; perimeter
G1 X115.773 Y114.744 E0.00459 ; perimeter
G1 X115.801 Y114.845 E0.00485 ; perimeter
G1 X115.808 Y114.957 E0.00518 ; perimeter
G1 X115.761 Y115.128 E0.00822 ; perimeter
G1 X115.284 Y115.747 E0.03622 ; perimeter
G1 X115.087 Y115.895 E0.01139 ; perimeter
G1 X114.917 Y115.968 E0.00860 ; perimeter
G1 X114.557 Y116.037 E0.01695 ; perimeter
G1 X113.739 Y116.106 E0.03806 ; perimeter
G1 X113.454 Y116.071 E0.01326 ; perimeter
G1 X113.274 Y115.950 E0.01006 ; perimeter
G1 X113.175 Y115.731 E0.01114 ; perimeter
G1 X113.194 Y115.604 E0.00596 ; perimeter
G1 X113.259 Y115.482 E0.00639 ; perimeter
G1 X113.453 Y115.456 F10800.000 ; move inwards before travel
G1 X113.599 Y115.688 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.362008
G1 F2400.000
G1 X113.937 Y115.689 E0.00896 ; infill
;WIDTH:0.383792
G1 X114.377 Y115.639 E0.01255 ; infill
;WIDTH:0.392208
G1 X114.421 Y115.631 E0.00129 ; infill
;WIDTH:0.417714
G1 X114.499 Y115.612 E0.00251 ; infill
;WIDTH:0.448815
G1 X114.640 Y115.569 E0.00497 ; infill
;WIDTH:0.471386
G1 X114.781 Y115.526 E0.00525 ; infill
G1 X114.939 Y115.446 E0.00632 ; infill
G1 X115.170 Y115.188 E0.01232 ; infill
;WIDTH:0.368174
G1 X115.405 Y114.918 E0.00968 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.170 Y115.188 E-0.09442 ; wipe and retract
;WIPE_END
G1 E-2.30558 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X115.507 Y111.920 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.414 Y111.904 E0.00436 ; perimeter
G1 X115.272 Y111.837 E0.00727 ; perimeter
G1 X115.192 Y111.734 E0.00603 ; perimeter
G1 X115.135 Y111.585 E0.00741 ; perimeter
G1 X115.154 Y111.327 E0.01197 ; perimeter
G1 X115.222 Y111.194 E0.00690 ; perimeter
G1 X115.312 Y111.112 E0.00569 ; perimeter
G1 X115.404 Y111.080 E0.00447 ; perimeter
G1 X115.546 Y111.070 E0.00662 ; perimeter
G1 X115.681 Y111.106 E0.00646 ; perimeter
G1 X115.786 Y111.178 E0.00590 ; perimeter
G1 X115.875 Y111.320 E0.00776 ; perimeter
G1 X115.899 Y111.475 E0.00726 ; perimeter
G1 X115.870 Y111.679 E0.00954 ; perimeter
G1 X115.811 Y111.782 E0.00551 ; perimeter
G1 X115.717 Y111.861 E0.00570 ; perimeter
G1 X115.565 Y111.904 E0.00730 ; perimeter
G1 X115.458 Y111.840 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.414 Y111.904 E-0.03975 ; wipe and retract
G1 X115.272 Y111.837 E-0.04144 ; wipe and retract
G1 X115.192 Y111.734 E-0.03434 ; wipe and retract
G1 X115.135 Y111.585 E-0.04220 ; wipe and retract
G1 X115.154 Y111.327 E-0.06822 ; wipe and retract
G1 X115.222 Y111.194 E-0.03929 ; wipe and retract
G1 X115.312 Y111.112 E-0.03241 ; wipe and retract
G1 X115.404 Y111.080 E-0.02549 ; wipe and retract
G1 X115.546 Y111.070 E-0.03773 ; wipe and retract
G1 X115.681 Y111.106 E-0.03681 ; wipe and retract
G1 X115.786 Y111.178 E-0.03363 ; wipe and retract
G1 X115.875 Y111.320 E-0.04420 ; wipe and retract
G1 X115.899 Y111.475 E-0.04134 ; wipe and retract
G1 X115.870 Y111.679 E-0.05433 ; wipe and retract
G1 X115.811 Y111.782 E-0.03139 ; wipe and retract
G1 X115.717 Y111.861 E-0.03246 ; wipe and retract
G1 X115.565 Y111.904 E-0.04157 ; wipe and retract
;WIPE_END
G1 E-1.72342 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X115.565 Y106.127 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.424 Y106.124 E0.00654 ; perimeter
G1 X115.297 Y106.070 E0.00640 ; perimeter
G1 X115.210 Y105.959 E0.00651 ; perimeter
G1 X115.156 Y105.779 E0.00870 ; perimeter
G1 X115.156 Y105.591 E0.00873 ; perimeter
G1 X115.214 Y105.422 E0.00827 ; perimeter
G1 X115.274 Y105.337 E0.00483 ; perimeter
G1 X115.412 Y105.261 E0.00728 ; perimeter
G1 X115.517 Y105.245 E0.00490 ; perimeter
G1 X115.708 Y105.307 E0.00933 ; perimeter
G1 X115.795 Y105.392 E0.00562 ; perimeter
G1 X115.873 Y105.619 E0.01112 ; perimeter
G1 X115.867 Y105.811 E0.00890 ; perimeter
G1 X115.814 Y105.948 E0.00678 ; perimeter
G1 X115.722 Y106.065 E0.00691 ; perimeter
G1 X115.623 Y106.112 E0.00508 ; perimeter
G1 X115.472 Y106.021 F10800.000 ; move inwards before travel
G1 X115.513 Y105.732 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.274714
G1 F2400.000
G1 X115.510 Y105.596 E0.00262 ; infill
;WIDTH:0.233358
G1 X115.502 Y105.582 E0.00026 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.510 Y105.596 E-0.00427 ; wipe and retract
;WIPE_END
G1 E-2.39573 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X114.878 Y102.872 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.742 Y102.765 E0.00805 ; perimeter
G1 X114.606 Y102.593 E0.01012 ; perimeter
G1 X114.515 Y102.437 E0.00838 ; perimeter
G1 X114.358 Y102.066 E0.01867 ; perimeter
G1 X114.132 Y101.651 E0.02188 ; perimeter
G1 X114.072 Y101.409 E0.01155 ; perimeter
G1 X114.028 Y101.351 E0.00340 ; perimeter
G1 X114.033 Y101.251 E0.00464 ; perimeter
G1 X114.099 Y101.046 E0.00996 ; perimeter
G1 X114.280 Y100.951 E0.00950 ; perimeter
G1 X114.577 Y100.995 E0.01389 ; perimeter
G1 X114.813 Y101.188 E0.01415 ; perimeter
G1 X115.011 Y101.477 E0.01622 ; perimeter
G1 X115.190 Y102.130 E0.03135 ; perimeter
G1 X115.189 Y102.449 E0.01481 ; perimeter
G1 X115.122 Y102.761 E0.01475 ; perimeter
G1 X114.991 Y102.898 E0.00879 ; perimeter
G1 X114.937 Y102.885 E0.00256 ; perimeter
G1 X114.840 Y102.702 F10800.000 ; move inwards before travel
G1 X114.397 Y101.208 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35091
G1 F2400.000
G1 X114.524 Y101.499 E0.00814 ; infill
G1 X114.619 Y101.655 E0.00467 ; infill
G1 X114.929 Y102.511 E0.02332 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.619 Y101.655 E-0.24025 ; wipe and retract
G1 X114.524 Y101.499 E-0.04815 ; wipe and retract
G1 X114.397 Y101.208 E-0.08384 ; wipe and retract
;WIPE_END
G1 E-2.02776 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X112.682 Y98.874 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.513 Y98.874 E0.00783 ; perimeter
G1 X112.333 Y98.794 E0.00911 ; perimeter
G1 X112.135 Y98.637 E0.01171 ; perimeter
G1 X111.862 Y98.312 E0.01966 ; perimeter
G1 X111.626 Y97.946 E0.02020 ; perimeter
G1 X111.484 Y97.772 E0.01039 ; perimeter
G1 X111.415 Y97.617 E0.00788 ; perimeter
G1 X111.386 Y97.452 E0.00776 ; perimeter
G1 X111.429 Y97.319 E0.00647 ; perimeter
G1 X111.658 Y97.119 E0.01407 ; perimeter
G1 X111.780 Y97.096 E0.00573 ; perimeter
G1 X112.060 Y97.202 E0.01388 ; perimeter
G1 X112.142 Y97.272 E0.00500 ; perimeter
G1 X112.403 Y97.663 E0.02179 ; perimeter
G1 X112.599 Y98.016 E0.01870 ; perimeter
G1 X112.685 Y98.244 E0.01125 ; perimeter
G1 X112.691 Y98.374 E0.00606 ; perimeter
G1 X112.743 Y98.516 E0.00698 ; perimeter
G1 X112.749 Y98.745 E0.01063 ; perimeter
G1 X112.721 Y98.830 E0.00415 ; perimeter
G1 X112.541 Y98.781 F10800.000 ; move inwards before travel
G1 X111.665 Y97.433 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.300639
G1 F2400.000
G1 X111.839 Y97.558 E0.00458 ; infill
G1 X111.945 Y97.701 E0.00383 ; infill
G1 X112.500 Y98.604 E0.02271 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.945 Y97.701 E-0.27960 ; wipe and retract
G1 X111.839 Y97.558 E-0.04719 ; wipe and retract
G1 X111.665 Y97.433 E-0.05642 ; wipe and retract
;WIPE_END
G1 E-2.01679 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X109.179 Y95.826 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.055 Y95.944 E0.00793 ; perimeter
G1 X108.889 Y95.988 E0.00795 ; perimeter
G1 X108.713 Y95.965 E0.00822 ; perimeter
G1 X108.584 Y95.907 E0.00657 ; perimeter
G1 X108.443 Y95.771 E0.00907 ; perimeter
G1 X108.369 Y95.524 E0.01196 ; perimeter
G1 X108.385 Y95.331 E0.00895 ; perimeter
G1 X108.471 Y95.202 E0.00716 ; perimeter
G1 X108.538 Y95.145 E0.00408 ; perimeter
G1 X108.688 Y95.104 E0.00722 ; perimeter
G1 X108.849 Y95.114 E0.00749 ; perimeter
G1 X109.006 Y95.190 E0.00804 ; perimeter
G1 X109.113 Y95.301 E0.00718 ; perimeter
G1 X109.197 Y95.423 E0.00687 ; perimeter
G1 X109.252 Y95.580 E0.00769 ; perimeter
G1 X109.196 Y95.768 E0.00909 ; perimeter
G1 X109.008 Y95.821 F10800.000 ; move inwards before travel
G1 X108.815 Y95.573 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.363143
G1 F2400.000
G1 X108.773 Y95.511 E0.00200 ; infill
;WIDTH:0.34197
G1 X108.757 Y95.493 E0.00059 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.773 Y95.511 E-0.00630 ; wipe and retract
;WIPE_END
G1 E-2.39370 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X105.857 Y94.736 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.688 Y94.824 E0.00883 ; perimeter
G1 X105.487 Y94.854 E0.00942 ; perimeter
G1 X105.072 Y94.794 E0.01942 ; perimeter
G1 X104.862 Y94.675 E0.01121 ; perimeter
G1 X104.232 Y94.644 E0.02920 ; perimeter
G1 X103.357 Y94.757 E0.04086 ; perimeter
G1 X103.058 Y94.759 E0.01385 ; perimeter
G1 X102.859 Y94.813 E0.00957 ; perimeter
G1 X102.677 Y94.783 E0.00854 ; perimeter
G1 X102.446 Y94.886 E0.01171 ; perimeter
G1 X102.190 Y95.111 E0.01579 ; perimeter
G1 X102.144 Y95.284 E0.00832 ; perimeter
G1 X102.029 Y95.462 E0.00980 ; perimeter
G1 X101.794 Y95.697 E0.01537 ; perimeter
G1 X101.378 Y95.944 E0.02245 ; perimeter
G1 X101.236 Y95.983 E0.00682 ; perimeter
G1 X101.075 Y95.973 E0.00745 ; perimeter
G1 X100.934 Y95.924 E0.00690 ; perimeter
G1 X100.824 Y95.746 E0.00972 ; perimeter
G1 X100.797 Y95.627 E0.00566 ; perimeter
G1 X100.907 Y95.364 E0.01320 ; perimeter
G1 X100.918 Y95.299 E0.00307 ; perimeter
G1 X101.000 Y95.202 E0.00588 ; perimeter
G1 X101.309 Y95.063 E0.01569 ; perimeter
G1 X101.492 Y95.017 E0.00877 ; perimeter
G1 X101.736 Y94.918 E0.01217 ; perimeter
G1 X101.925 Y94.914 E0.00877 ; perimeter
G1 X102.187 Y94.822 E0.01286 ; perimeter
G1 X102.464 Y94.683 E0.01434 ; perimeter
G1 X102.695 Y94.298 E0.02080 ; perimeter
G1 X102.885 Y94.072 E0.01367 ; perimeter
G1 X103.210 Y93.909 E0.01687 ; perimeter
G1 X103.539 Y93.880 E0.01527 ; perimeter
G1 X104.002 Y93.893 E0.02146 ; perimeter
G1 X104.348 Y93.992 E0.01668 ; perimeter
G1 X104.703 Y94.053 E0.01665 ; perimeter
G1 X105.163 Y94.008 E0.02144 ; perimeter
G1 X105.587 Y94.064 E0.01980 ; perimeter
G1 X105.784 Y94.143 E0.00985 ; perimeter
G1 X105.911 Y94.272 E0.00839 ; perimeter
G1 X105.991 Y94.499 E0.01112 ; perimeter
G1 X105.977 Y94.599 E0.00468 ; perimeter
G1 X105.897 Y94.691 E0.00565 ; perimeter
G1 X105.680 Y94.666 F10800.000 ; move inwards before travel
G1 X105.728 Y94.517 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35678
G1 F2400.000
G1 X105.485 Y94.452 E0.00658 ; infill
G1 X105.203 Y94.413 E0.00743 ; infill
G1 X104.819 Y94.284 E0.01057 ; infill
G1 X105.712 Y94.433 F10800.000 ; move to first infill point
;WIDTH:0.224051
G1 F2400.000
G1 X104.939 Y94.355 E0.01171 ; infill
;WIDTH:0.208599
G1 X104.700 Y94.359 E0.00329 ; infill
;WIDTH:0.169049
G1 X104.203 Y94.305 E0.00524 ; infill
G1 X104.476 Y94.258 F10800.000 ; move to first infill point
;WIDTH:0.37802
G1 F2400.000
G1 X102.970 Y94.346 E0.04202 ; infill
G1 X102.838 Y94.527 F10800.000 ; move to first infill point
;WIDTH:0.229683
G1 F2400.000
G1 X103.577 Y94.123 E0.01309 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.838 Y94.527 E-0.22241 ; wipe and retract
;WIPE_END
G1 E-2.17759 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X101.188 Y95.739 ; move to first infill point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.214769
G1 F2400.000
G1 X101.894 Y95.156 E0.01308 ; infill
G1 X101.932 Y95.155 F10800.000 ; move to first infill point
;WIDTH:0.294253
G1 F2400.000
G1 X101.599 Y95.371 E0.00830 ; infill
G1 X101.441 Y95.445 E0.00363 ; infill
;WIDTH:0.390924
G1 X101.289 Y95.527 E0.00501 ; infill
G1 X101.116 Y95.732 E0.00776 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.289 Y95.527 E-0.07075 ; wipe and retract
G1 X101.441 Y95.445 E-0.04573 ; wipe and retract
;WIPE_END
G1 E-2.28352 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X99.816 Y97.279 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.975 Y97.430 E0.01015 ; perimeter
G1 X100.038 Y97.637 E0.01003 ; perimeter
G1 X99.990 Y97.957 E0.01500 ; perimeter
G1 X99.878 Y98.198 E0.01231 ; perimeter
G1 X99.682 Y98.489 E0.01624 ; perimeter
G1 X99.507 Y98.629 E0.01038 ; perimeter
G1 X99.349 Y98.867 E0.01323 ; perimeter
G1 X99.238 Y98.907 E0.00549 ; perimeter
G1 X99.222 Y98.895 E0.00092 ; perimeter
G1 X99.137 Y98.475 E0.01984 ; perimeter
G1 X99.109 Y98.272 E0.00948 ; perimeter
G1 X99.181 Y97.812 E0.02155 ; perimeter
G1 X99.249 Y97.519 E0.01395 ; perimeter
G1 X99.325 Y97.419 E0.00579 ; perimeter
G1 X99.525 Y97.261 E0.01182 ; perimeter
G1 X99.661 Y97.205 E0.00681 ; perimeter
G1 X99.762 Y97.253 E0.00516 ; perimeter
G1 X99.815 Y97.498 F10800.000 ; move inwards before travel
G1 X99.668 Y97.470 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.210357
G1 F2400.000
G1 X99.653 Y97.645 E0.00244 ; infill
;WIDTH:0.328359
G1 X99.620 Y97.706 E0.00166 ; infill
G1 X99.427 Y98.383 E0.01670 ; infill
G1 X99.368 Y98.389 F10800.000 ; move to first infill point
;WIDTH:0.212115
G1 F2400.000
G1 X99.791 Y97.660 E0.01185 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.368 Y98.389 E-0.22222 ; wipe and retract
;WIPE_END
G1 E-2.17778 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X99.302 Y100.513 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.468 Y100.654 E0.01007 ; perimeter
G1 X99.706 Y101.004 E0.01959 ; perimeter
G1 X99.841 Y101.158 E0.00947 ; perimeter
G1 X99.882 Y101.269 E0.00549 ; perimeter
G1 X100.039 Y101.434 E0.01057 ; perimeter
G1 X100.159 Y101.715 E0.01418 ; perimeter
G1 X100.191 Y101.890 E0.00824 ; perimeter
G1 X100.172 Y102.024 E0.00625 ; perimeter
G1 X100.038 Y102.214 E0.01075 ; perimeter
G1 X99.893 Y102.307 E0.00800 ; perimeter
G1 X99.676 Y102.303 E0.01005 ; perimeter
G1 X99.437 Y102.171 E0.01267 ; perimeter
G1 X99.380 Y102.066 E0.00551 ; perimeter
G1 X99.261 Y101.663 E0.01944 ; perimeter
G1 X99.181 Y101.112 E0.02582 ; perimeter
G1 X99.222 Y100.621 E0.02281 ; perimeter
G1 X99.260 Y100.534 E0.00440 ; perimeter
G1 X99.408 Y100.703 F10800.000 ; move inwards before travel
G1 X99.495 Y101.122 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.377316
G1 F2400.000
G1 X99.777 Y101.903 E0.02309 ; infill
;WIDTH:0.276846
G1 X99.854 Y102.052 E0.00326 ; infill
G1 X99.805 Y102.055 F10800.000 ; move to first infill point
;WIDTH:0.268218
G1 F2400.000
G1 X99.576 Y101.435 E0.01237 ; infill
;WIDTH:0.2497
G1 X99.497 Y101.125 E0.00550 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.576 Y101.435 E-0.08446 ; wipe and retract
;WIPE_END
G1 E-2.31554 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 X100.992 Y105.462 ; move to first perimeter point
G1 Z19.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.171 Y105.452 E0.00830 ; perimeter
G1 X101.374 Y105.522 E0.00996 ; perimeter
G1 X101.553 Y105.675 E0.01088 ; perimeter
G1 X101.621 Y105.803 E0.00675 ; perimeter
G1 X101.717 Y105.896 E0.00619 ; perimeter
G1 X101.923 Y106.170 E0.01588 ; perimeter
G1 X102.006 Y106.331 E0.00840 ; perimeter
G1 X102.713 Y107.032 E0.04611 ; perimeter
G1 X103.037 Y107.306 E0.01965 ; perimeter
G1 X103.814 Y107.737 E0.04115 ; perimeter
G1 X103.993 Y107.884 E0.01073 ; perimeter
G1 X104.097 Y108.104 E0.01129 ; perimeter
G1 X104.075 Y108.255 E0.00708 ; perimeter
G1 X103.997 Y108.414 E0.00821 ; perimeter
G1 X103.742 Y108.522 E0.01282 ; perimeter
G1 X103.504 Y108.489 E0.01115 ; perimeter
G1 X103.301 Y108.417 E0.00996 ; perimeter
G1 X102.980 Y108.203 E0.01787 ; perimeter
G1 X102.214 Y107.483 E0.04870 ; perimeter
G1 X101.858 Y107.187 E0.02145 ; perimeter
G1 X101.638 Y106.952 E0.01487 ; perimeter
G1 X101.335 Y106.687 E0.01868 ; perimeter
G1 X100.988 Y106.326 E0.02320 ; perimeter
G1 X100.882 Y106.107 E0.01125 ; perimeter
G1 X100.834 Y105.852 E0.01202 ; perimeter
G1 X100.837 Y105.764 E0.00407 ; perimeter
G1 X100.954 Y105.509 E0.01302 ; perimeter
G1 X101.138 Y105.565 F10800.000 ; move inwards before travel
G1 X101.170 Y105.707 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341539
G1 F2400.000
G1 X101.258 Y105.970 E0.00689 ; infill
G1 X101.313 Y106.069 E0.00282 ; infill
G1 X101.654 Y106.468 E0.01303 ; infill
;WIDTH:0.231132
G1 X102.102 Y106.927 E0.01005 ; infill
G1 X102.489 Y107.282 E0.00821 ; infill
;WIDTH:0.257868
G1 X102.847 Y107.600 E0.00855 ; infill
;WIDTH:0.297547
G1 X102.976 Y107.694 E0.00338 ; infill
;WIDTH:0.337227
G1 X103.105 Y107.788 E0.00391 ; infill
;WIDTH:0.376906
G1 X103.234 Y107.882 E0.00444 ; infill
;WIDTH:0.384581
G1 X103.826 Y108.217 E0.01930 ; infill
;LAYER_CHANGE
;Z:19.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;19.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.234 Y107.882 E-0.17927 ; wipe and retract
;WIPE_END
G1 E-2.22073 F2400.000 ; retract
G1 Z19.475 F10800.000 ; lift Z
G1 Z19.600 ; move to next layer (97)
;AFTER_LAYER_CHANGE
;19.6
G1 Z19.675 ; lift Z
G1 X108.027 Y110.399 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.143 Y110.302 E0.00701 ; perimeter
G1 X108.306 Y110.256 E0.00783 ; perimeter
G1 X108.504 Y110.266 E0.00919 ; perimeter
G1 X108.661 Y110.320 E0.00770 ; perimeter
G1 X108.823 Y110.434 E0.00918 ; perimeter
G1 X108.885 Y110.511 E0.00460 ; perimeter
G1 X108.945 Y110.654 E0.00716 ; perimeter
G1 X108.959 Y110.759 E0.00493 ; perimeter
G1 X108.942 Y110.858 E0.00464 ; perimeter
G1 X108.875 Y110.984 E0.00663 ; perimeter
G1 X108.819 Y111.035 E0.00348 ; perimeter
G1 X108.705 Y111.081 E0.00570 ; perimeter
G1 X108.580 Y111.095 E0.00581 ; perimeter
G1 X108.316 Y111.054 E0.01238 ; perimeter
G1 X108.080 Y110.892 E0.01325 ; perimeter
G1 X108.021 Y110.808 E0.00476 ; perimeter
G1 X107.973 Y110.688 E0.00600 ; perimeter
G1 X107.964 Y110.582 E0.00492 ; perimeter
G1 X108.007 Y110.456 E0.00617 ; perimeter
G1 X108.177 Y110.417 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.143 Y110.302 E-0.05417 ; wipe and retract
G1 X108.306 Y110.256 E-0.04463 ; wipe and retract
G1 X108.504 Y110.266 E-0.05235 ; wipe and retract
G1 X108.661 Y110.320 E-0.04389 ; wipe and retract
G1 X108.823 Y110.434 E-0.05230 ; wipe and retract
G1 X108.885 Y110.511 E-0.02623 ; wipe and retract
G1 X108.945 Y110.654 E-0.04082 ; wipe and retract
G1 X108.959 Y110.759 E-0.02807 ; wipe and retract
G1 X108.942 Y110.858 E-0.02646 ; wipe and retract
G1 X108.875 Y110.984 E-0.03775 ; wipe and retract
G1 X108.819 Y111.035 E-0.01984 ; wipe and retract
G1 X108.705 Y111.081 E-0.03247 ; wipe and retract
G1 X108.580 Y111.095 E-0.03307 ; wipe and retract
G1 X108.316 Y111.054 E-0.07053 ; wipe and retract
G1 X108.080 Y110.892 E-0.07548 ; wipe and retract
G1 X108.021 Y110.808 E-0.02714 ; wipe and retract
G1 X107.973 Y110.688 E-0.03416 ; wipe and retract
G1 X107.964 Y110.582 E-0.02803 ; wipe and retract
G1 X108.007 Y110.456 E-0.03516 ; wipe and retract
;WIPE_END
G1 E-1.63745 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X110.820 Y113.280 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.892 Y113.232 E0.00402 ; perimeter
G1 X111.028 Y113.197 E0.00650 ; perimeter
G1 X111.222 Y113.214 E0.00898 ; perimeter
G1 X111.479 Y113.325 E0.01297 ; perimeter
G1 X111.632 Y113.543 E0.01234 ; perimeter
G1 X111.671 Y113.788 E0.01152 ; perimeter
G1 X111.609 Y113.979 E0.00929 ; perimeter
G1 X111.485 Y114.075 E0.00725 ; perimeter
G1 X111.381 Y114.096 E0.00493 ; perimeter
G1 X111.215 Y114.086 E0.00771 ; perimeter
G1 X111.003 Y113.997 E0.01064 ; perimeter
G1 X110.868 Y113.885 E0.00814 ; perimeter
G1 X110.763 Y113.717 E0.00917 ; perimeter
G1 X110.724 Y113.518 E0.00937 ; perimeter
G1 X110.755 Y113.374 E0.00683 ; perimeter
G1 X110.786 Y113.329 E0.00253 ; perimeter
G1 X110.904 Y113.302 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.892 Y113.232 E-0.03810 ; wipe and retract
G1 X111.028 Y113.197 E-0.03704 ; wipe and retract
G1 X111.222 Y113.214 E-0.05118 ; wipe and retract
G1 X111.479 Y113.325 E-0.07386 ; wipe and retract
G1 X111.632 Y113.543 E-0.07031 ; wipe and retract
G1 X111.671 Y113.788 E-0.06564 ; wipe and retract
G1 X111.609 Y113.979 E-0.05294 ; wipe and retract
G1 X111.485 Y114.075 E-0.04131 ; wipe and retract
G1 X111.381 Y114.096 E-0.02810 ; wipe and retract
G1 X111.215 Y114.086 E-0.04395 ; wipe and retract
G1 X111.003 Y113.997 E-0.06059 ; wipe and retract
G1 X110.868 Y113.885 E-0.04640 ; wipe and retract
G1 X110.763 Y113.717 E-0.05225 ; wipe and retract
G1 X110.724 Y113.518 E-0.05338 ; wipe and retract
G1 X110.755 Y113.374 E-0.03892 ; wipe and retract
G1 X110.786 Y113.329 E-0.01440 ; wipe and retract
;WIPE_END
G1 E-1.63160 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X113.201 Y115.538 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.258 Y115.426 E0.00584 ; perimeter
G1 X113.391 Y115.298 E0.00854 ; perimeter
G1 X113.445 Y115.273 E0.00277 ; perimeter
G1 X113.667 Y115.232 E0.01045 ; perimeter
G1 X113.948 Y115.281 E0.01318 ; perimeter
G1 X114.218 Y115.255 E0.01260 ; perimeter
G1 X114.566 Y115.144 E0.01693 ; perimeter
G1 X114.859 Y114.908 E0.01741 ; perimeter
G1 X115.150 Y114.608 E0.01933 ; perimeter
G1 X115.338 Y114.521 E0.00961 ; perimeter
G1 X115.427 Y114.511 E0.00416 ; perimeter
G1 X115.630 Y114.594 E0.01016 ; perimeter
G1 X115.712 Y114.666 E0.00504 ; perimeter
G1 X115.773 Y114.762 E0.00529 ; perimeter
G1 X115.805 Y114.961 E0.00935 ; perimeter
G1 X115.764 Y115.122 E0.00767 ; perimeter
G1 X115.271 Y115.766 E0.03758 ; perimeter
G1 X115.089 Y115.886 E0.01009 ; perimeter
G1 X114.930 Y115.949 E0.00792 ; perimeter
G1 X114.689 Y115.995 E0.01140 ; perimeter
G1 X114.267 Y116.015 E0.01956 ; perimeter
G1 X113.680 Y116.073 E0.02733 ; perimeter
G1 X113.481 Y116.051 E0.00925 ; perimeter
G1 X113.284 Y115.935 E0.01061 ; perimeter
G1 X113.171 Y115.694 E0.01231 ; perimeter
G1 X113.190 Y115.597 E0.00459 ; perimeter
G1 X113.322 Y115.503 F10800.000 ; move inwards before travel
G1 X113.597 Y115.658 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.328639
G1 F2400.000
G1 X113.952 Y115.663 E0.00842 ; infill
G1 X114.311 Y115.628 E0.00857 ; infill
;WIDTH:0.372367
G1 X114.474 Y115.599 E0.00456 ; infill
;WIDTH:0.416096
G1 X114.638 Y115.570 E0.00516 ; infill
;WIDTH:0.428866
G1 X114.741 Y115.543 E0.00341 ; infill
;WIDTH:0.450232
G1 X114.810 Y115.518 E0.00248 ; infill
;WIDTH:0.473373
G1 X114.877 Y115.479 E0.00278 ; infill
;WIDTH:0.482144
G1 X115.046 Y115.328 E0.00827 ; infill
;WIDTH:0.364901
G1 X115.400 Y114.927 E0.01432 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.046 Y115.328 E-0.14114 ; wipe and retract
;WIPE_END
G1 E-2.25886 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X115.811 Y111.730 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.719 Y111.807 E0.00558 ; perimeter
G1 X115.501 Y111.870 E0.01050 ; perimeter
G1 X115.414 Y111.854 E0.00412 ; perimeter
G1 X115.268 Y111.784 E0.00750 ; perimeter
G1 X115.210 Y111.716 E0.00412 ; perimeter
G1 X115.138 Y111.559 E0.00801 ; perimeter
G1 X115.142 Y111.324 E0.01086 ; perimeter
G1 X115.264 Y111.105 E0.01163 ; perimeter
G1 X115.419 Y111.029 E0.00801 ; perimeter
G1 X115.563 Y111.025 E0.00665 ; perimeter
G1 X115.694 Y111.062 E0.00630 ; perimeter
G1 X115.794 Y111.134 E0.00573 ; perimeter
G1 X115.873 Y111.261 E0.00692 ; perimeter
G1 X115.900 Y111.415 E0.00722 ; perimeter
G1 X115.874 Y111.616 E0.00939 ; perimeter
G1 X115.840 Y111.677 E0.00325 ; perimeter
G1 X115.692 Y111.712 F10800.000 ; move inwards before travel
G1 X115.519 Y111.399 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.313406
G1 F2400.000
G1 X115.514 Y111.477 E0.00174 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.519 Y111.399 E-0.02042 ; wipe and retract
;WIPE_END
G1 E-2.37958 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X115.564 Y106.197 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.421 Y106.194 E0.00662 ; perimeter
G1 X115.301 Y106.142 E0.00606 ; perimeter
G1 X115.200 Y106.010 E0.00771 ; perimeter
G1 X115.156 Y105.852 E0.00763 ; perimeter
G1 X115.157 Y105.663 E0.00876 ; perimeter
G1 X115.241 Y105.455 E0.01039 ; perimeter
G1 X115.278 Y105.405 E0.00289 ; perimeter
G1 X115.409 Y105.332 E0.00694 ; perimeter
G1 X115.528 Y105.317 E0.00556 ; perimeter
G1 X115.706 Y105.374 E0.00864 ; perimeter
G1 X115.802 Y105.466 E0.00617 ; perimeter
G1 X115.861 Y105.617 E0.00751 ; perimeter
G1 X115.866 Y105.892 E0.01272 ; perimeter
G1 X115.821 Y106.025 E0.00651 ; perimeter
G1 X115.767 Y106.102 E0.00435 ; perimeter
G1 X115.683 Y106.166 E0.00492 ; perimeter
G1 X115.622 Y106.182 E0.00288 ; perimeter
G1 X115.477 Y106.084 F10800.000 ; move inwards before travel
G1 X115.519 Y105.667 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.269774
G1 F2400.000
G1 X115.515 Y105.850 E0.00344 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.519 Y105.667 E-0.04812 ; wipe and retract
;WIPE_END
G1 E-2.35188 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X114.880 Y102.591 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.714 Y102.488 E0.00909 ; perimeter
G1 X114.540 Y102.311 E0.01146 ; perimeter
G1 X114.441 Y102.106 E0.01057 ; perimeter
G1 X114.330 Y101.976 E0.00789 ; perimeter
G1 X114.172 Y101.692 E0.01507 ; perimeter
G1 X114.107 Y101.435 E0.01227 ; perimeter
G1 X114.113 Y101.222 E0.00987 ; perimeter
G1 X114.140 Y101.184 E0.00216 ; perimeter
G1 X114.413 Y101.048 E0.01416 ; perimeter
G1 X114.659 Y101.077 E0.01147 ; perimeter
G1 X114.812 Y101.189 E0.00878 ; perimeter
G1 X114.987 Y101.420 E0.01343 ; perimeter
G1 X115.103 Y101.807 E0.01871 ; perimeter
G1 X115.105 Y102.227 E0.01946 ; perimeter
G1 X115.041 Y102.441 E0.01037 ; perimeter
G1 X114.931 Y102.560 E0.00750 ; perimeter
G1 X114.787 Y102.418 F10800.000 ; move inwards before travel
G1 X114.846 Y102.249 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291306
G1 F2400.000
G1 X114.738 Y101.891 E0.00772 ; infill
G1 X114.519 Y101.303 E0.01297 ; infill
G1 X114.863 Y101.971 F10800.000 ; move to first infill point
;WIDTH:0.359699
G1 F2400.000
G1 X114.512 Y101.451 E0.01653 ; infill
;WIDTH:0.338883
G1 X114.495 Y101.436 E0.00055 ; infill
;WIDTH:0.313583
G1 X114.479 Y101.422 E0.00050 ; infill
;WIDTH:0.288282
G1 X114.414 Y101.392 E0.00144 ; infill
;WIDTH:0.247997
G1 X114.350 Y101.363 E0.00120 ; infill
G1 X114.414 Y101.317 F10800.000 ; move to first infill point
;WIDTH:0.399575
G1 F2400.000
G1 X114.608 Y101.614 E0.01052 ; infill
G1 X114.860 Y102.205 E0.01905 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.608 Y101.614 E-0.16953 ; wipe and retract
G1 X114.414 Y101.317 E-0.09357 ; wipe and retract
;WIPE_END
G1 E-2.13689 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X112.490 Y98.604 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.385 Y98.602 E0.00489 ; perimeter
G1 X112.048 Y98.421 E0.01769 ; perimeter
G1 X111.925 Y98.320 E0.00738 ; perimeter
G1 X111.736 Y98.116 E0.01290 ; perimeter
G1 X111.527 Y97.819 E0.01682 ; perimeter
G1 X111.443 Y97.640 E0.00916 ; perimeter
G1 X111.440 Y97.490 E0.00694 ; perimeter
G1 X111.513 Y97.261 E0.01111 ; perimeter
G1 X111.687 Y97.112 E0.01063 ; perimeter
G1 X111.797 Y97.096 E0.00515 ; perimeter
G1 X112.066 Y97.204 E0.01345 ; perimeter
G1 X112.178 Y97.295 E0.00667 ; perimeter
G1 X112.339 Y97.541 E0.01359 ; perimeter
G1 X112.474 Y97.805 E0.01376 ; perimeter
G1 X112.491 Y97.963 E0.00737 ; perimeter
G1 X112.563 Y98.128 E0.00831 ; perimeter
G1 X112.581 Y98.351 E0.01037 ; perimeter
G1 X112.537 Y98.567 E0.01023 ; perimeter
G1 X112.402 Y98.546 F10800.000 ; move inwards before travel
G1 X112.332 Y98.266 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.367203
G1 F2400.000
G1 X111.844 Y97.540 E0.02361 ; infill
;WIDTH:0.345241
G1 X111.825 Y97.512 E0.00083 ; infill
G1 X111.771 Y97.358 F10800.000 ; move to first infill point
;WIDTH:0.249935
G1 F2400.000
G1 X112.160 Y98.068 E0.01394 ; infill
G1 X112.297 Y98.277 E0.00430 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.160 Y98.068 E-0.06597 ; wipe and retract
G1 X111.771 Y97.358 E-0.21373 ; wipe and retract
;WIPE_END
G1 E-2.12030 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X109.003 Y95.873 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.812 Y95.902 E0.00892 ; perimeter
G1 X108.565 Y95.838 E0.01183 ; perimeter
G1 X108.424 Y95.710 E0.00881 ; perimeter
G1 X108.323 Y95.479 E0.01170 ; perimeter
G1 X108.329 Y95.303 E0.00817 ; perimeter
G1 X108.414 Y95.142 E0.00842 ; perimeter
G1 X108.510 Y95.063 E0.00578 ; perimeter
G1 X108.665 Y95.036 E0.00728 ; perimeter
G1 X108.830 Y95.051 E0.00767 ; perimeter
G1 X109.009 Y95.151 E0.00949 ; perimeter
G1 X109.059 Y95.205 E0.00340 ; perimeter
G1 X109.165 Y95.379 E0.00944 ; perimeter
G1 X109.195 Y95.522 E0.00676 ; perimeter
G1 X109.158 Y95.654 E0.00638 ; perimeter
G1 X109.045 Y95.831 E0.00972 ; perimeter
G1 X108.843 Y95.766 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.812 Y95.902 E-0.06429 ; wipe and retract
G1 X108.565 Y95.838 E-0.06738 ; wipe and retract
G1 X108.424 Y95.710 E-0.05019 ; wipe and retract
G1 X108.323 Y95.479 E-0.06665 ; wipe and retract
G1 X108.329 Y95.303 E-0.04655 ; wipe and retract
G1 X108.414 Y95.142 E-0.04794 ; wipe and retract
G1 X108.510 Y95.063 E-0.03295 ; wipe and retract
G1 X108.665 Y95.036 E-0.04147 ; wipe and retract
G1 X108.830 Y95.051 E-0.04369 ; wipe and retract
G1 X109.009 Y95.151 E-0.05409 ; wipe and retract
G1 X109.059 Y95.205 E-0.01940 ; wipe and retract
G1 X109.165 Y95.379 E-0.05379 ; wipe and retract
G1 X109.195 Y95.522 E-0.03851 ; wipe and retract
G1 X109.158 Y95.654 E-0.03632 ; wipe and retract
G1 X109.045 Y95.831 E-0.05540 ; wipe and retract
;WIPE_END
G1 E-1.68138 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X106.158 Y94.530 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.143 Y94.635 E0.00494 ; perimeter
G1 X105.994 Y94.776 E0.00949 ; perimeter
G1 X105.861 Y94.851 E0.00707 ; perimeter
G1 X105.655 Y94.880 E0.00966 ; perimeter
G1 X105.288 Y94.830 E0.01713 ; perimeter
G1 X104.853 Y94.583 E0.02319 ; perimeter
G1 X104.438 Y94.577 E0.01921 ; perimeter
G1 X104.270 Y94.550 E0.00789 ; perimeter
G1 X103.886 Y94.644 E0.01832 ; perimeter
G1 X103.393 Y94.730 E0.02319 ; perimeter
G1 X103.057 Y94.735 E0.01557 ; perimeter
G1 X102.987 Y94.697 E0.00369 ; perimeter
G1 X102.880 Y94.679 E0.00502 ; perimeter
G1 X102.790 Y94.548 E0.00737 ; perimeter
G1 X102.762 Y94.439 E0.00520 ; perimeter
G1 X102.861 Y94.165 E0.01348 ; perimeter
G1 X102.952 Y94.050 E0.00681 ; perimeter
G1 X103.268 Y93.886 E0.01651 ; perimeter
G1 X103.658 Y93.874 E0.01805 ; perimeter
G1 X104.006 Y93.962 E0.01663 ; perimeter
G1 X104.156 Y94.053 E0.00817 ; perimeter
G1 X104.573 Y94.132 E0.01962 ; perimeter
G1 X105.428 Y94.038 E0.03986 ; perimeter
G1 X105.694 Y94.076 E0.01245 ; perimeter
G1 X105.919 Y94.159 E0.01111 ; perimeter
G1 X106.073 Y94.300 E0.00967 ; perimeter
G1 X106.142 Y94.472 E0.00857 ; perimeter
G1 X106.071 Y94.591 F10800.000 ; move inwards before travel
G1 X105.904 Y94.517 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.21233
G1 F2400.000
G1 X105.741 Y94.496 E0.00231 ; infill
;WIDTH:0.318596
G1 X105.150 Y94.311 E0.01420 ; infill
G1 X105.087 Y94.439 F10800.000 ; move to first infill point
;WIDTH:0.362943
G1 F2400.000
G1 X105.421 Y94.443 E0.00889 ; infill
G1 X105.892 Y94.541 E0.01279 ; infill
G1 X104.127 Y94.293 F10800.000 ; move to first infill point
;WIDTH:0.292337
G1 F2400.000
G1 X103.086 Y94.268 E0.02160 ; infill
G1 X103.041 Y94.378 F10800.000 ; move to first infill point
;WIDTH:0.366117
G1 F2400.000
G1 X103.364 Y94.306 E0.00892 ; infill
G1 X103.650 Y94.277 E0.00770 ; infill
G1 X103.670 Y94.116 E0.00436 ; infill
G1 X103.675 Y94.116 F10800.000 ; move to first infill point
;WIDTH:0.333905
G1 F2400.000
G1 X103.018 Y94.441 E0.01775 ; infill
G1 X103.015 Y94.448 F10800.000 ; move to first infill point
;WIDTH:0.166986
G1 F2400.000
G1 X103.095 Y94.411 E0.00091 ; infill
;WIDTH:0.204163
G1 X103.439 Y94.279 E0.00494 ; infill
;WIDTH:0.241342
G1 X103.783 Y94.148 E0.00608 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.439 Y94.279 E-0.09722 ; wipe and retract
;WIPE_END
G1 E-2.30278 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X101.981 Y95.139 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.930 Y95.384 E0.01162 ; perimeter
G1 X101.786 Y95.655 E0.01421 ; perimeter
G1 X101.628 Y95.811 E0.01029 ; perimeter
G1 X101.419 Y95.940 E0.01137 ; perimeter
G1 X101.151 Y96.028 E0.01309 ; perimeter
G1 X100.979 Y96.036 E0.00796 ; perimeter
G1 X100.925 Y96.061 E0.00274 ; perimeter
G1 X100.855 Y96.025 E0.00366 ; perimeter
G1 X100.787 Y95.914 E0.00605 ; perimeter
G1 X100.786 Y95.593 E0.01486 ; perimeter
G1 X100.874 Y95.358 E0.01162 ; perimeter
G1 X101.009 Y95.226 E0.00877 ; perimeter
G1 X101.258 Y95.118 E0.01254 ; perimeter
G1 X101.575 Y95.047 E0.01507 ; perimeter
G1 X101.876 Y95.059 E0.01395 ; perimeter
G1 X101.956 Y95.095 E0.00405 ; perimeter
G1 X101.813 Y95.325 F10800.000 ; move inwards before travel
G1 X101.696 Y95.311 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.180405
G1 F2400.000
G1 X101.034 Y95.620 E0.00835 ; infill
G1 X101.037 Y95.685 F10800.000 ; move to first infill point
;WIDTH:0.357862
G1 F2400.000
G1 X101.374 Y95.502 E0.01004 ; infill
G1 X101.673 Y95.301 E0.00945 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.374 Y95.502 E-0.09524 ; wipe and retract
G1 X101.037 Y95.685 E-0.10118 ; wipe and retract
;WIPE_END
G1 E-2.20358 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X100.022 Y97.309 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.070 Y97.599 E0.01361 ; perimeter
G1 X100.038 Y97.869 E0.01260 ; perimeter
G1 X99.957 Y98.054 E0.00937 ; perimeter
G1 X99.765 Y98.247 E0.01259 ; perimeter
G1 X99.532 Y98.414 E0.01329 ; perimeter
G1 X99.389 Y98.394 E0.00669 ; perimeter
G1 X99.248 Y98.200 E0.01111 ; perimeter
G1 X99.202 Y97.923 E0.01299 ; perimeter
G1 X99.276 Y97.533 E0.01840 ; perimeter
G1 X99.383 Y97.376 E0.00878 ; perimeter
G1 X99.562 Y97.241 E0.01041 ; perimeter
G1 X99.753 Y97.191 E0.00916 ; perimeter
G1 X99.830 Y97.191 E0.00358 ; perimeter
G1 X99.902 Y97.196 E0.00331 ; perimeter
G1 X99.997 Y97.232 E0.00471 ; perimeter
G1 X100.003 Y97.252 E0.00097 ; perimeter
G1 X99.841 Y97.540 F10800.000 ; move inwards before travel
G1 X99.748 Y97.441 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.364568
G1 F2400.000
G1 X99.655 Y97.690 E0.00711 ; infill
G1 X99.538 Y98.102 E0.01145 ; infill
G1 X99.500 Y98.131 F10800.000 ; move to first infill point
;WIDTH:0.227084
G1 F2400.000
G1 X99.730 Y97.533 E0.00982 ; infill
;WIDTH:0.210661
G1 X99.687 Y97.457 E0.00121 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.730 Y97.533 E-0.02288 ; wipe and retract
;WIPE_END
G1 E-2.37712 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X99.526 Y101.108 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.712 Y101.172 E0.00912 ; perimeter
G1 X99.850 Y101.316 E0.00924 ; perimeter
G1 X99.971 Y101.357 E0.00590 ; perimeter
G1 X100.088 Y101.470 E0.00753 ; perimeter
G1 X100.165 Y101.622 E0.00789 ; perimeter
G1 X100.197 Y101.770 E0.00702 ; perimeter
G1 X100.181 Y101.986 E0.01006 ; perimeter
G1 X100.115 Y102.084 E0.00544 ; perimeter
G1 X99.921 Y102.209 E0.01067 ; perimeter
G1 X99.649 Y102.203 E0.01262 ; perimeter
G1 X99.484 Y102.139 E0.00819 ; perimeter
G1 X99.420 Y102.051 E0.00502 ; perimeter
G1 X99.325 Y101.746 E0.01482 ; perimeter
G1 X99.295 Y101.478 E0.01247 ; perimeter
G1 X99.385 Y101.360 E0.00688 ; perimeter
G1 X99.413 Y101.117 E0.01134 ; perimeter
G1 X99.462 Y101.041 E0.00418 ; perimeter
G1 X99.489 Y101.061 E0.00151 ; perimeter
G1 X99.589 Y101.294 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.712 Y101.172 E-0.06583 ; wipe and retract
G1 X99.850 Y101.316 E-0.05262 ; wipe and retract
G1 X99.971 Y101.357 E-0.03362 ; wipe and retract
G1 X100.088 Y101.470 E-0.04287 ; wipe and retract
G1 X100.165 Y101.622 E-0.04496 ; wipe and retract
G1 X100.197 Y101.770 E-0.04000 ; wipe and retract
G1 X100.181 Y101.986 E-0.05734 ; wipe and retract
G1 X100.115 Y102.084 E-0.03100 ; wipe and retract
G1 X99.921 Y102.209 E-0.06079 ; wipe and retract
G1 X99.649 Y102.203 E-0.07187 ; wipe and retract
G1 X99.484 Y102.139 E-0.04666 ; wipe and retract
G1 X99.420 Y102.051 E-0.02858 ; wipe and retract
G1 X99.325 Y101.746 E-0.08446 ; wipe and retract
G1 X99.295 Y101.478 E-0.07107 ; wipe and retract
G1 X99.385 Y101.360 E-0.03920 ; wipe and retract
G1 X99.413 Y101.117 E-0.06461 ; wipe and retract
G1 X99.462 Y101.041 E-0.02381 ; wipe and retract
G1 X99.489 Y101.061 E-0.00858 ; wipe and retract
;WIPE_END
G1 E-1.53214 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X100.918 Y105.335 ; move to first perimeter point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.084 Y105.292 E0.00796 ; perimeter
G1 X101.122 Y105.300 E0.00178 ; perimeter
G1 X101.203 Y105.365 E0.00482 ; perimeter
G1 X101.358 Y105.416 E0.00757 ; perimeter
G1 X101.542 Y105.627 E0.01295 ; perimeter
G1 X101.833 Y106.222 E0.03071 ; perimeter
G1 X101.970 Y106.364 E0.00912 ; perimeter
G1 X102.060 Y106.528 E0.00866 ; perimeter
G1 X102.574 Y107.011 E0.03268 ; perimeter
G1 X102.713 Y107.175 E0.00999 ; perimeter
G1 X102.849 Y107.260 E0.00741 ; perimeter
G1 X103.062 Y107.472 E0.01391 ; perimeter
G1 X103.285 Y107.490 E0.01038 ; perimeter
G1 X103.412 Y107.562 E0.00675 ; perimeter
G1 X103.675 Y107.629 E0.01257 ; perimeter
G1 X103.831 Y107.718 E0.00834 ; perimeter
G1 X103.985 Y107.840 E0.00909 ; perimeter
G1 X104.091 Y108.039 E0.01042 ; perimeter
G1 X104.104 Y108.206 E0.00774 ; perimeter
G1 X103.999 Y108.369 E0.00897 ; perimeter
G1 X103.731 Y108.498 E0.01380 ; perimeter
G1 X103.521 Y108.474 E0.00979 ; perimeter
G1 X103.353 Y108.406 E0.00840 ; perimeter
G1 X103.011 Y108.166 E0.01934 ; perimeter
G1 X102.719 Y107.850 E0.01995 ; perimeter
G1 X102.610 Y107.701 E0.00856 ; perimeter
G1 X101.861 Y107.054 E0.04585 ; perimeter
G1 X101.493 Y106.690 E0.02399 ; perimeter
G1 X101.279 Y106.559 E0.01162 ; perimeter
G1 X100.990 Y106.272 E0.01888 ; perimeter
G1 X100.836 Y106.006 E0.01422 ; perimeter
G1 X100.785 Y105.807 E0.00952 ; perimeter
G1 X100.780 Y105.619 E0.00872 ; perimeter
G1 X100.873 Y105.376 E0.01207 ; perimeter
G1 X101.073 Y105.409 F10800.000 ; move inwards before travel
G1 X101.090 Y105.581 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.308911
G1 F2400.000
G1 X101.377 Y106.318 E0.01748 ; infill
G1 X101.078 Y105.956 F10800.000 ; move to first infill point
;WIDTH:0.129092
G1 F2400.000
G1 X101.667 Y106.461 E0.00555 ; infill
G1 X101.823 Y106.645 E0.00173 ; infill
G1 X101.694 Y106.549 F10800.000 ; move to first infill point
;WIDTH:0.231213
G1 F2400.000
G1 X101.365 Y106.117 E0.00851 ; infill
;WIDTH:0.348904
G1 X101.240 Y105.924 E0.00585 ; infill
G1 X101.111 Y105.588 E0.00914 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.240 Y105.924 E-0.09483 ; wipe and retract
G1 X101.365 Y106.117 E-0.06063 ; wipe and retract
;WIPE_END
G1 E-2.24453 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 X103.026 Y107.711 ; move to first infill point
G1 Z19.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.290471
G1 F2400.000
G1 X103.260 Y107.895 E0.00614 ; infill
;WIDTH:0.298167
G1 X103.290 Y107.911 E0.00072 ; infill
;WIDTH:0.343358
G1 X103.404 Y107.964 E0.00314 ; infill
;WIDTH:0.354939
G1 X103.662 Y108.091 E0.00746 ; infill
G1 X103.855 Y108.112 E0.00503 ; infill
;LAYER_CHANGE
;Z:19.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;19.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.662 Y108.091 E-0.05116 ; wipe and retract
G1 X103.404 Y107.964 E-0.07592 ; wipe and retract
;WIPE_END
G1 E-2.27292 F2400.000 ; retract
G1 Z19.675 F10800.000 ; lift Z
G1 Z19.800 ; move to next layer (98)
;AFTER_LAYER_CHANGE
;19.8
G1 Z19.875 ; lift Z
G1 X108.129 Y110.449 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.218 Y110.370 E0.00550 ; perimeter
G1 X108.401 Y110.305 E0.00901 ; perimeter
G1 X108.582 Y110.308 E0.00835 ; perimeter
G1 X108.785 Y110.376 E0.00995 ; perimeter
G1 X108.929 Y110.481 E0.00827 ; perimeter
G1 X108.990 Y110.559 E0.00456 ; perimeter
G1 X109.054 Y110.712 E0.00767 ; perimeter
G1 X109.065 Y110.785 E0.00342 ; perimeter
G1 X109.049 Y110.891 E0.00499 ; perimeter
G1 X108.983 Y111.028 E0.00703 ; perimeter
G1 X108.915 Y111.091 E0.00431 ; perimeter
G1 X108.857 Y111.115 E0.00290 ; perimeter
G1 X108.655 Y111.142 E0.00945 ; perimeter
G1 X108.428 Y111.101 E0.01070 ; perimeter
G1 X108.203 Y110.958 E0.01234 ; perimeter
G1 X108.106 Y110.817 E0.00790 ; perimeter
G1 X108.075 Y110.724 E0.00458 ; perimeter
G1 X108.072 Y110.602 E0.00564 ; perimeter
G1 X108.108 Y110.506 E0.00476 ; perimeter
G1 X108.248 Y110.462 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.218 Y110.370 E-0.04594 ; wipe and retract
G1 X108.401 Y110.305 E-0.05131 ; wipe and retract
G1 X108.582 Y110.308 E-0.04758 ; wipe and retract
G1 X108.785 Y110.376 E-0.05671 ; wipe and retract
G1 X108.929 Y110.481 E-0.04712 ; wipe and retract
G1 X108.990 Y110.559 E-0.02599 ; wipe and retract
G1 X109.054 Y110.712 E-0.04367 ; wipe and retract
G1 X109.065 Y110.785 E-0.01948 ; wipe and retract
G1 X109.049 Y110.891 E-0.02841 ; wipe and retract
G1 X108.983 Y111.028 E-0.04007 ; wipe and retract
G1 X108.915 Y111.091 E-0.02454 ; wipe and retract
G1 X108.857 Y111.115 E-0.01650 ; wipe and retract
G1 X108.655 Y111.142 E-0.05385 ; wipe and retract
G1 X108.428 Y111.101 E-0.06094 ; wipe and retract
G1 X108.203 Y110.958 E-0.07030 ; wipe and retract
G1 X108.106 Y110.817 E-0.04502 ; wipe and retract
G1 X108.075 Y110.724 E-0.02607 ; wipe and retract
G1 X108.072 Y110.602 E-0.03213 ; wipe and retract
G1 X108.108 Y110.506 E-0.02711 ; wipe and retract
;WIPE_END
G1 E-1.63726 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X110.903 Y113.359 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.004 Y113.293 E0.00557 ; perimeter
G1 X111.159 Y113.257 E0.00739 ; perimeter
G1 X111.392 Y113.287 E0.01089 ; perimeter
G1 X111.598 Y113.401 E0.01089 ; perimeter
G1 X111.659 Y113.478 E0.00457 ; perimeter
G1 X111.738 Y113.648 E0.00870 ; perimeter
G1 X111.763 Y113.892 E0.01135 ; perimeter
G1 X111.702 Y114.049 E0.00779 ; perimeter
G1 X111.537 Y114.167 E0.00940 ; perimeter
G1 X111.322 Y114.160 E0.00993 ; perimeter
G1 X111.116 Y114.078 E0.01031 ; perimeter
G1 X110.950 Y113.942 E0.00995 ; perimeter
G1 X110.859 Y113.798 E0.00788 ; perimeter
G1 X110.815 Y113.589 E0.00987 ; perimeter
G1 X110.869 Y113.408 E0.00877 ; perimeter
G1 X111.022 Y113.379 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.004 Y113.293 E-0.04683 ; wipe and retract
G1 X111.159 Y113.257 E-0.04208 ; wipe and retract
G1 X111.392 Y113.287 E-0.06205 ; wipe and retract
G1 X111.598 Y113.401 E-0.06204 ; wipe and retract
G1 X111.659 Y113.478 E-0.02604 ; wipe and retract
G1 X111.738 Y113.648 E-0.04956 ; wipe and retract
G1 X111.763 Y113.892 E-0.06467 ; wipe and retract
G1 X111.702 Y114.049 E-0.04438 ; wipe and retract
G1 X111.537 Y114.167 E-0.05353 ; wipe and retract
G1 X111.322 Y114.160 E-0.05655 ; wipe and retract
G1 X111.116 Y114.078 E-0.05876 ; wipe and retract
G1 X110.950 Y113.942 E-0.05668 ; wipe and retract
G1 X110.859 Y113.798 E-0.04488 ; wipe and retract
G1 X110.815 Y113.589 E-0.05622 ; wipe and retract
G1 X110.869 Y113.408 E-0.04995 ; wipe and retract
;WIPE_END
G1 E-1.62580 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X113.202 Y115.471 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.367 Y115.279 E0.01173 ; perimeter
G1 X113.478 Y115.227 E0.00569 ; perimeter
G1 X113.595 Y115.206 E0.00550 ; perimeter
G1 X113.970 Y115.271 E0.01764 ; perimeter
G1 X114.276 Y115.270 E0.01415 ; perimeter
G1 X114.478 Y115.205 E0.00985 ; perimeter
G1 X114.823 Y114.948 E0.01993 ; perimeter
G1 X115.144 Y114.616 E0.02140 ; perimeter
G1 X115.312 Y114.536 E0.00861 ; perimeter
G1 X115.423 Y114.518 E0.00523 ; perimeter
G1 X115.625 Y114.601 E0.01010 ; perimeter
G1 X115.706 Y114.670 E0.00495 ; perimeter
G1 X115.773 Y114.781 E0.00598 ; perimeter
G1 X115.794 Y114.852 E0.00345 ; perimeter
G1 X115.802 Y114.965 E0.00526 ; perimeter
G1 X115.765 Y115.122 E0.00748 ; perimeter
G1 X115.456 Y115.539 E0.02402 ; perimeter
G1 X115.261 Y115.772 E0.01406 ; perimeter
G1 X115.095 Y115.875 E0.00905 ; perimeter
G1 X114.944 Y115.930 E0.00742 ; perimeter
G1 X114.820 Y115.953 E0.00585 ; perimeter
G1 X114.111 Y115.957 E0.03285 ; perimeter
G1 X114.006 Y115.996 E0.00520 ; perimeter
G1 X113.623 Y116.040 E0.01787 ; perimeter
G1 X113.532 Y116.030 E0.00423 ; perimeter
G1 X113.417 Y115.993 E0.00560 ; perimeter
G1 X113.285 Y115.897 E0.00756 ; perimeter
G1 X113.169 Y115.631 E0.01347 ; perimeter
G1 X113.190 Y115.530 E0.00477 ; perimeter
G1 X113.454 Y115.442 F10800.000 ; move inwards before travel
G1 X113.578 Y115.454 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341238
G1 F2400.000
G1 X113.597 Y115.602 E0.00371 ; infill
;WIDTH:0.382218
G1 X113.619 Y115.627 E0.00092 ; infill
G1 X113.771 Y115.631 E0.00430 ; infill
;WIDTH:0.251945
G1 X114.346 Y115.610 E0.00999 ; infill
;WIDTH:0.296376
G1 X114.490 Y115.587 E0.00309 ; infill
;WIDTH:0.340807
G1 X114.635 Y115.564 E0.00363 ; infill
;WIDTH:0.365342
G1 X115.247 Y115.414 E0.01688 ; infill
G1 X115.400 Y114.934 F10800.000 ; move to first infill point
;WIDTH:0.365874
G1 F2400.000
G1 X115.395 Y114.936 E0.00012 ; infill
;WIDTH:0.373672
G1 X115.389 Y114.947 E0.00036 ; infill
;WIDTH:0.400372
G1 X115.255 Y115.105 E0.00615 ; infill
;WIDTH:0.432477
G1 X115.099 Y115.286 E0.00773 ; infill
;WIDTH:0.449608
G1 X114.895 Y115.463 E0.00915 ; infill
G1 X114.338 Y115.715 E0.02068 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.895 Y115.463 E-0.16139 ; wipe and retract
G1 X115.099 Y115.286 E-0.07138 ; wipe and retract
;WIPE_END
G1 E-2.16724 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X115.424 Y110.975 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.542 Y110.968 E0.00544 ; perimeter
G1 X115.685 Y111.009 E0.00691 ; perimeter
G1 X115.804 Y111.095 E0.00681 ; perimeter
G1 X115.870 Y111.200 E0.00575 ; perimeter
G1 X115.900 Y111.367 E0.00786 ; perimeter
G1 X115.879 Y111.552 E0.00863 ; perimeter
G1 X115.811 Y111.677 E0.00658 ; perimeter
G1 X115.722 Y111.754 E0.00546 ; perimeter
G1 X115.493 Y111.821 E0.01103 ; perimeter
G1 X115.420 Y111.807 E0.00345 ; perimeter
G1 X115.255 Y111.720 E0.00865 ; perimeter
G1 X115.182 Y111.600 E0.00653 ; perimeter
G1 X115.142 Y111.507 E0.00469 ; perimeter
G1 X115.145 Y111.260 E0.01144 ; perimeter
G1 X115.265 Y111.056 E0.01094 ; perimeter
G1 X115.371 Y111.002 E0.00551 ; perimeter
G1 X115.511 Y111.054 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.542 Y110.968 E-0.04600 ; wipe and retract
G1 X115.685 Y111.009 E-0.03937 ; wipe and retract
G1 X115.804 Y111.095 E-0.03881 ; wipe and retract
G1 X115.870 Y111.200 E-0.03273 ; wipe and retract
G1 X115.900 Y111.367 E-0.04479 ; wipe and retract
G1 X115.879 Y111.552 E-0.04914 ; wipe and retract
G1 X115.811 Y111.677 E-0.03747 ; wipe and retract
G1 X115.722 Y111.754 E-0.03108 ; wipe and retract
G1 X115.493 Y111.821 E-0.06283 ; wipe and retract
G1 X115.420 Y111.807 E-0.01965 ; wipe and retract
G1 X115.255 Y111.720 E-0.04925 ; wipe and retract
G1 X115.182 Y111.600 E-0.03720 ; wipe and retract
G1 X115.142 Y111.507 E-0.02672 ; wipe and retract
G1 X115.145 Y111.260 E-0.06520 ; wipe and retract
G1 X115.265 Y111.056 E-0.06230 ; wipe and retract
G1 X115.371 Y111.002 E-0.03138 ; wipe and retract
;WIPE_END
G1 E-1.72607 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X115.557 Y106.271 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.418 Y106.265 E0.00644 ; perimeter
G1 X115.278 Y106.204 E0.00711 ; perimeter
G1 X115.194 Y106.076 E0.00707 ; perimeter
G1 X115.155 Y105.925 E0.00723 ; perimeter
G1 X115.158 Y105.733 E0.00887 ; perimeter
G1 X115.267 Y105.492 E0.01225 ; perimeter
G1 X115.383 Y105.413 E0.00650 ; perimeter
G1 X115.555 Y105.392 E0.00806 ; perimeter
G1 X115.708 Y105.446 E0.00748 ; perimeter
G1 X115.796 Y105.527 E0.00557 ; perimeter
G1 X115.854 Y105.660 E0.00670 ; perimeter
G1 X115.875 Y105.766 E0.00500 ; perimeter
G1 X115.867 Y105.948 E0.00845 ; perimeter
G1 X115.821 Y106.099 E0.00730 ; perimeter
G1 X115.784 Y106.157 E0.00319 ; perimeter
G1 X115.691 Y106.234 E0.00561 ; perimeter
G1 X115.615 Y106.255 E0.00364 ; perimeter
G1 X115.473 Y106.160 F10800.000 ; move inwards before travel
G1 X115.513 Y105.922 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273666
G1 F2400.000
G1 X115.523 Y105.758 E0.00315 ; infill
;WIDTH:0.247548
G1 X115.524 Y105.734 E0.00041 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.523 Y105.758 E-0.00635 ; wipe and retract
;WIPE_END
G1 E-2.39365 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X114.880 Y102.243 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.792 Y102.257 E0.00411 ; perimeter
G1 X114.656 Y102.210 E0.00667 ; perimeter
G1 X114.494 Y102.055 E0.01041 ; perimeter
G1 X114.400 Y102.011 E0.00476 ; perimeter
G1 X114.321 Y101.919 E0.00565 ; perimeter
G1 X114.184 Y101.698 E0.01203 ; perimeter
G1 X114.093 Y101.435 E0.01289 ; perimeter
G1 X114.169 Y101.213 E0.01086 ; perimeter
G1 X114.346 Y101.086 E0.01008 ; perimeter
G1 X114.435 Y101.047 E0.00450 ; perimeter
G1 X114.678 Y101.092 E0.01145 ; perimeter
G1 X114.815 Y101.191 E0.00784 ; perimeter
G1 X114.960 Y101.374 E0.01081 ; perimeter
G1 X115.034 Y101.636 E0.01260 ; perimeter
G1 X115.030 Y101.978 E0.01585 ; perimeter
G1 X114.960 Y102.147 E0.00849 ; perimeter
G1 X114.918 Y102.197 E0.00300 ; perimeter
G1 X114.806 Y102.193 F10800.000 ; move inwards before travel
G1 X114.782 Y101.947 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.268026
G1 F2400.000
G1 X114.447 Y101.310 E0.01347 ; infill
G1 X114.360 Y101.400 F10800.000 ; move to first infill point
;WIDTH:0.317143
G1 F2400.000
G1 X114.497 Y101.443 E0.00327 ; infill
;WIDTH:0.346275
G1 X114.586 Y101.565 E0.00380 ; infill
G1 X114.737 Y101.954 E0.01054 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.586 Y101.565 E-0.11025 ; wipe and retract
G1 X114.497 Y101.443 E-0.03980 ; wipe and retract
;WIPE_END
G1 E-2.24995 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X112.207 Y98.339 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.027 Y98.260 E0.00907 ; perimeter
G1 X111.819 Y98.119 E0.01165 ; perimeter
G1 X111.612 Y97.922 E0.01324 ; perimeter
G1 X111.452 Y97.622 E0.01575 ; perimeter
G1 X111.457 Y97.492 E0.00603 ; perimeter
G1 X111.557 Y97.228 E0.01308 ; perimeter
G1 X111.709 Y97.105 E0.00909 ; perimeter
G1 X111.815 Y97.095 E0.00493 ; perimeter
G1 X112.065 Y97.202 E0.01259 ; perimeter
G1 X112.172 Y97.281 E0.00615 ; perimeter
G1 X112.369 Y97.638 E0.01887 ; perimeter
G1 X112.402 Y97.950 E0.01453 ; perimeter
G1 X112.430 Y98.013 E0.00321 ; perimeter
G1 X112.353 Y98.308 E0.01413 ; perimeter
G1 X112.322 Y98.331 E0.00177 ; perimeter
G1 X112.264 Y98.329 E0.00267 ; perimeter
G1 X112.146 Y98.152 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.027 Y98.260 E-0.06518 ; wipe and retract
G1 X111.819 Y98.119 E-0.06635 ; wipe and retract
G1 X111.612 Y97.922 E-0.07541 ; wipe and retract
G1 X111.452 Y97.622 E-0.08974 ; wipe and retract
G1 X111.457 Y97.492 E-0.03433 ; wipe and retract
G1 X111.557 Y97.228 E-0.07452 ; wipe and retract
G1 X111.709 Y97.105 E-0.05179 ; wipe and retract
G1 X111.815 Y97.095 E-0.02810 ; wipe and retract
G1 X112.065 Y97.202 E-0.07175 ; wipe and retract
G1 X112.172 Y97.281 E-0.03505 ; wipe and retract
G1 X112.369 Y97.638 E-0.10751 ; wipe and retract
G1 X112.402 Y97.950 E-0.08276 ; wipe and retract
G1 X112.430 Y98.013 E-0.01830 ; wipe and retract
G1 X112.353 Y98.308 E-0.08051 ; wipe and retract
G1 X112.322 Y98.331 E-0.01009 ; wipe and retract
G1 X112.264 Y98.329 E-0.01522 ; wipe and retract
;WIPE_END
G1 E-1.49339 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X108.986 Y95.780 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.953 Y95.808 E0.00200 ; perimeter
G1 X108.737 Y95.829 E0.01005 ; perimeter
G1 X108.558 Y95.781 E0.00857 ; perimeter
G1 X108.347 Y95.597 E0.01298 ; perimeter
G1 X108.279 Y95.458 E0.00716 ; perimeter
G1 X108.283 Y95.399 E0.00273 ; perimeter
G1 X108.236 Y95.264 E0.00662 ; perimeter
G1 X108.234 Y95.190 E0.00345 ; perimeter
G1 X108.315 Y95.056 E0.00722 ; perimeter
G1 X108.448 Y94.983 E0.00703 ; perimeter
G1 X108.592 Y94.953 E0.00685 ; perimeter
G1 X108.826 Y94.996 E0.01103 ; perimeter
G1 X109.023 Y95.138 E0.01121 ; perimeter
G1 X109.135 Y95.340 E0.01070 ; perimeter
G1 X109.150 Y95.437 E0.00455 ; perimeter
G1 X109.130 Y95.559 E0.00574 ; perimeter
G1 X109.018 Y95.729 E0.00944 ; perimeter
G1 X108.943 Y95.771 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.953 Y95.808 E-0.02696 ; wipe and retract
G1 X108.737 Y95.829 E-0.05723 ; wipe and retract
G1 X108.558 Y95.781 E-0.04885 ; wipe and retract
G1 X108.347 Y95.597 E-0.07396 ; wipe and retract
G1 X108.279 Y95.458 E-0.04082 ; wipe and retract
G1 X108.283 Y95.399 E-0.01554 ; wipe and retract
G1 X108.236 Y95.264 E-0.03770 ; wipe and retract
G1 X108.234 Y95.190 E-0.01967 ; wipe and retract
G1 X108.315 Y95.056 E-0.04115 ; wipe and retract
G1 X108.448 Y94.983 E-0.04005 ; wipe and retract
G1 X108.592 Y94.953 E-0.03900 ; wipe and retract
G1 X108.826 Y94.996 E-0.06286 ; wipe and retract
G1 X109.023 Y95.138 E-0.06385 ; wipe and retract
G1 X109.135 Y95.340 E-0.06096 ; wipe and retract
G1 X109.150 Y95.437 E-0.02594 ; wipe and retract
G1 X109.130 Y95.559 E-0.03270 ; wipe and retract
G1 X109.018 Y95.729 E-0.05380 ; wipe and retract
;WIPE_END
G1 E-1.65896 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X104.973 Y94.403 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.605 Y94.351 E0.01721 ; perimeter
G1 X104.987 Y94.311 E0.01777 ; perimeter
G1 X105.054 Y94.237 E0.00463 ; perimeter
G1 X105.321 Y94.100 E0.01389 ; perimeter
G1 X105.579 Y94.068 E0.01204 ; perimeter
G1 X105.809 Y94.091 E0.01073 ; perimeter
G1 X106.078 Y94.179 E0.01309 ; perimeter
G1 X106.209 Y94.292 E0.00806 ; perimeter
G1 X106.282 Y94.430 E0.00720 ; perimeter
G1 X106.325 Y94.472 E0.00276 ; perimeter
G1 X106.330 Y94.625 E0.00710 ; perimeter
G1 X106.298 Y94.684 E0.00313 ; perimeter
G1 X106.041 Y94.878 E0.01493 ; perimeter
G1 X105.822 Y94.906 E0.01020 ; perimeter
G1 X105.495 Y94.865 E0.01528 ; perimeter
G1 X105.130 Y94.663 E0.01933 ; perimeter
G1 X105.004 Y94.455 E0.01127 ; perimeter
G1 X104.904 Y94.039 F10800.000 ; move inwards before travel
G1 X104.372 Y94.331 ; move to first perimeter point
G1 F1800.000
G1 X104.041 Y94.505 E0.01731 ; perimeter
G1 X103.937 Y94.527 E0.00494 ; perimeter
G1 X103.713 Y94.656 E0.01195 ; perimeter
G1 X103.433 Y94.709 E0.01323 ; perimeter
G1 X103.213 Y94.712 E0.01019 ; perimeter
G1 X103.023 Y94.615 E0.00986 ; perimeter
G1 X102.934 Y94.513 E0.00627 ; perimeter
G1 X102.927 Y94.264 E0.01156 ; perimeter
G1 X103.010 Y94.048 E0.01075 ; perimeter
G1 X103.129 Y93.958 E0.00691 ; perimeter
G1 X103.251 Y93.899 E0.00625 ; perimeter
G1 X103.594 Y93.886 E0.01592 ; perimeter
G1 X103.921 Y94.017 E0.01629 ; perimeter
G1 X104.171 Y94.187 E0.01399 ; perimeter
G1 X104.222 Y94.285 E0.00512 ; perimeter
G1 X104.315 Y94.313 E0.00449 ; perimeter
G1 X104.001 Y94.374 F10800.000 ; move inwards before travel
G1 X103.837 Y94.252 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.376114
G1 F2400.000
G1 X103.329 Y94.317 E0.01420 ; infill
;WIDTH:0.348278
G1 X103.310 Y94.329 E0.00057 ; infill
;WIDTH:0.323078
G1 X103.206 Y94.438 E0.00350 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.310 Y94.329 E-0.03967 ; wipe and retract
;WIPE_END
G1 E-2.36033 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X105.296 Y94.383 ; move to first infill point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.366783
G1 F2400.000
G1 X105.613 Y94.475 E0.00888 ; infill
G1 X106.065 Y94.564 E0.01241 ; infill
G1 X106.060 Y94.525 F10800.000 ; move to first infill point
;WIDTH:0.296401
G1 F2400.000
G1 X105.915 Y94.524 E0.00306 ; infill
G1 X105.352 Y94.355 E0.01238 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.915 Y94.524 E-0.15501 ; wipe and retract
G1 X106.060 Y94.525 E-0.03831 ; wipe and retract
;WIPE_END
G1 E-2.20669 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X99.903 Y98.055 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.791 Y98.144 E0.00665 ; perimeter
G1 X99.619 Y98.182 E0.00814 ; perimeter
G1 X99.574 Y98.218 E0.00265 ; perimeter
G1 X99.486 Y98.210 E0.00412 ; perimeter
G1 X99.327 Y98.069 E0.00981 ; perimeter
G1 X99.305 Y97.912 E0.00734 ; perimeter
G1 X99.252 Y97.828 E0.00462 ; perimeter
G1 X99.298 Y97.553 E0.01291 ; perimeter
G1 X99.453 Y97.312 E0.01330 ; perimeter
G1 X99.590 Y97.179 E0.00883 ; perimeter
G1 X99.691 Y97.156 E0.00477 ; perimeter
G1 X99.863 Y97.035 E0.00975 ; perimeter
G1 X99.954 Y97.002 E0.00451 ; perimeter
G1 X100.219 Y96.782 E0.01595 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.272 Y96.737 E0.00291 ; perimeter (bridge)
G1 X100.258 Y96.797 E0.00255 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.156 Y97.229 E0.02057 ; perimeter
G1 X100.185 Y97.409 E0.00844 ; perimeter
G1 X100.142 Y97.524 E0.00569 ; perimeter
G1 X100.118 Y97.728 E0.00949 ; perimeter
G1 X100.026 Y97.933 E0.01042 ; perimeter
G1 X99.946 Y98.013 E0.00524 ; perimeter
G1 X99.765 Y98.016 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.791 Y98.144 E-0.05367 ; wipe and retract
G1 X99.619 Y98.182 E-0.04636 ; wipe and retract
G1 X99.574 Y98.218 E-0.01507 ; wipe and retract
G1 X99.486 Y98.210 E-0.02346 ; wipe and retract
G1 X99.327 Y98.069 E-0.05591 ; wipe and retract
G1 X99.305 Y97.912 E-0.04184 ; wipe and retract
G1 X99.252 Y97.828 E-0.02630 ; wipe and retract
G1 X99.298 Y97.553 E-0.07354 ; wipe and retract
G1 X99.453 Y97.312 E-0.07579 ; wipe and retract
G1 X99.590 Y97.179 E-0.05031 ; wipe and retract
G1 X99.691 Y97.156 E-0.02720 ; wipe and retract
G1 X99.863 Y97.035 E-0.05554 ; wipe and retract
G1 X99.954 Y97.002 E-0.02570 ; wipe and retract
G1 X100.219 Y96.782 E-0.09084 ; wipe and retract
;WIPE_END
G1 E-1.73849 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X101.771 Y95.463 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.668 Y95.727 E0.01311 ; perimeter
G1 X101.491 Y95.903 E0.01158 ; perimeter
G1 X101.427 Y95.942 E0.00348 ; perimeter
G1 X101.270 Y95.985 E0.00753 ; perimeter
G1 X101.077 Y96.101 E0.01043 ; perimeter
G1 X101.017 Y96.104 E0.00278 ; perimeter
G1 X100.662 Y96.272 E0.01821 ; perimeter
G1 X100.483 Y96.458 E0.01197 ; perimeter
G1 X100.485 Y96.393 E0.00303 ; perimeter
G1 X100.606 Y96.117 E0.01396 ; perimeter
G1 X100.650 Y95.722 E0.01839 ; perimeter
G1 X100.758 Y95.540 E0.00979 ; perimeter
G1 X100.798 Y95.430 E0.00545 ; perimeter
G1 X101.006 Y95.251 E0.01268 ; perimeter
G1 X101.184 Y95.182 E0.00886 ; perimeter
G1 X101.525 Y95.154 E0.01582 ; perimeter
G1 X101.599 Y95.172 E0.00353 ; perimeter
G1 X101.727 Y95.291 E0.00810 ; perimeter
G1 X101.748 Y95.408 E0.00551 ; perimeter
G1 X101.517 Y95.587 F10800.000 ; move inwards before travel
G1 X101.513 Y95.469 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.197287
G1 F2400.000
G1 X100.955 Y95.803 E0.00834 ; infill
;WIDTH:0.167788
G1 X100.935 Y95.818 E0.00026 ; infill
;WIDTH:0.148684
G1 X100.876 Y95.871 E0.00071 ; infill
G1 X100.890 Y95.897 F10800.000 ; move to first infill point
;WIDTH:0.269835
G1 F2400.000
G1 X101.083 Y95.683 E0.00545 ; infill
;WIDTH:0.30085
G1 X101.113 Y95.647 E0.00099 ; infill
;WIDTH:0.310748
G1 X101.492 Y95.418 E0.00986 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.113 Y95.647 E-0.11682 ; wipe and retract
;WIPE_END
G1 E-2.28318 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X99.901 Y97.303 ; move to first infill point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.371748
G1 F2400.000
G1 X99.661 Y97.744 E0.01373 ; infill
;WIDTH:0.342895
G1 X99.657 Y97.777 E0.00082 ; infill
;WIDTH:0.303823
G1 X99.645 Y97.812 E0.00080 ; infill
;WIDTH:0.262877
G1 X99.593 Y97.941 E0.00255 ; infill
G1 X99.559 Y97.949 F10800.000 ; move to first infill point
;WIDTH:0.327441
G1 F2400.000
G1 X99.864 Y97.329 E0.01636 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.559 Y97.949 E-0.18247 ; wipe and retract
;WIPE_END
G1 E-2.21753 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X99.822 Y101.327 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.987 Y101.380 E0.00802 ; perimeter
G1 X100.138 Y101.504 E0.00905 ; perimeter
G1 X100.216 Y101.639 E0.00720 ; perimeter
G1 X100.238 Y101.759 E0.00565 ; perimeter
G1 X100.205 Y101.947 E0.00887 ; perimeter
G1 X100.140 Y102.072 E0.00652 ; perimeter
G1 X99.959 Y102.181 E0.00979 ; perimeter
G1 X99.705 Y102.185 E0.01175 ; perimeter
G1 X99.521 Y102.112 E0.00919 ; perimeter
G1 X99.387 Y101.815 E0.01509 ; perimeter
G1 X99.361 Y101.573 E0.01128 ; perimeter
G1 X99.408 Y101.496 E0.00414 ; perimeter
G1 X99.501 Y101.393 E0.00645 ; perimeter
G1 X99.763 Y101.339 E0.01242 ; perimeter
G1 X99.896 Y101.483 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.987 Y101.380 E-0.05998 ; wipe and retract
G1 X100.138 Y101.504 E-0.05158 ; wipe and retract
G1 X100.216 Y101.639 E-0.04103 ; wipe and retract
G1 X100.238 Y101.759 E-0.03219 ; wipe and retract
G1 X100.205 Y101.947 E-0.05056 ; wipe and retract
G1 X100.140 Y102.072 E-0.03716 ; wipe and retract
G1 X99.959 Y102.181 E-0.05577 ; wipe and retract
G1 X99.705 Y102.185 E-0.06692 ; wipe and retract
G1 X99.521 Y102.112 E-0.05236 ; wipe and retract
G1 X99.387 Y101.815 E-0.08596 ; wipe and retract
G1 X99.361 Y101.573 E-0.06425 ; wipe and retract
G1 X99.408 Y101.496 E-0.02358 ; wipe and retract
G1 X99.501 Y101.393 E-0.03672 ; wipe and retract
G1 X99.763 Y101.339 E-0.07075 ; wipe and retract
;WIPE_END
G1 E-1.67119 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X102.720 Y107.456 ; move to first perimeter point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.933 Y107.499 E0.01007 ; perimeter
G1 X103.088 Y107.601 E0.00857 ; perimeter
G1 X103.548 Y107.621 E0.02133 ; perimeter
G1 X103.847 Y107.702 E0.01438 ; perimeter
G1 X104.097 Y107.867 E0.01386 ; perimeter
G1 X104.181 Y108.019 E0.00804 ; perimeter
G1 X104.175 Y108.164 E0.00674 ; perimeter
G1 X104.109 Y108.325 E0.00804 ; perimeter
G1 X104.070 Y108.376 E0.00296 ; perimeter
G1 X103.755 Y108.479 E0.01539 ; perimeter
G1 X103.541 Y108.460 E0.00995 ; perimeter
G1 X103.398 Y108.392 E0.00733 ; perimeter
G1 X103.169 Y108.218 E0.01333 ; perimeter
G1 X102.925 Y107.827 E0.02136 ; perimeter
G1 X102.917 Y107.716 E0.00514 ; perimeter
G1 X102.759 Y107.560 E0.01029 ; perimeter
G1 X102.741 Y107.512 E0.00237 ; perimeter
G1 X102.917 Y107.549 F10800.000 ; move inwards before travel
G1 X101.822 Y106.669 ; move to first perimeter point
G1 F1800.000
G1 X101.552 Y106.478 E0.01532 ; perimeter
G1 X101.486 Y106.486 E0.00307 ; perimeter
G1 X101.187 Y106.340 E0.01539 ; perimeter
G1 X100.976 Y106.179 E0.01228 ; perimeter
G1 X100.783 Y105.880 E0.01649 ; perimeter
G1 X100.725 Y105.664 E0.01037 ; perimeter
G1 X100.719 Y105.470 E0.00900 ; perimeter
G1 X100.805 Y105.232 E0.01173 ; perimeter
G1 X100.894 Y105.149 E0.00563 ; perimeter
G1 X100.983 Y105.129 E0.00420 ; perimeter
G1 X101.162 Y105.172 E0.00853 ; perimeter
G1 X101.352 Y105.311 E0.01091 ; perimeter
G1 X101.482 Y105.486 E0.01007 ; perimeter
G1 X101.506 Y105.596 E0.00524 ; perimeter
G1 X101.647 Y105.942 E0.01730 ; perimeter
G1 X101.634 Y106.031 E0.00417 ; perimeter
G1 X101.679 Y106.200 E0.00810 ; perimeter
G1 X101.623 Y106.394 E0.00933 ; perimeter
G1 X101.787 Y106.621 E0.01296 ; perimeter
G1 X101.600 Y106.424 F10800.000 ; move inwards before travel
G1 X101.403 Y106.177 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.171972
G1 F2400.000
G1 X101.326 Y106.061 E0.00149 ; infill
;WIDTH:0.198287
G1 X101.312 Y106.034 E0.00040 ; infill
;WIDTH:0.224776
G1 X101.181 Y105.714 E0.00522 ; infill
;WIDTH:0.251266
G1 X101.051 Y105.395 E0.00598 ; infill
G1 X101.025 Y105.389 F10800.000 ; move to first infill point
;WIDTH:0.317346
G1 F2400.000
G1 X101.101 Y105.608 E0.00531 ; infill
;WIDTH:0.332961
G1 X101.140 Y105.721 E0.00287 ; infill
G1 X101.369 Y106.160 E0.01195 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.140 Y105.721 E-0.13076 ; wipe and retract
G1 X101.101 Y105.608 E-0.03144 ; wipe and retract
;WIPE_END
G1 E-2.23780 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 X103.795 Y108.212 ; move to first infill point
G1 Z19.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.131144
G1 F2400.000
G1 X103.245 Y107.849 E0.00483 ; infill
G1 X103.242 Y107.863 F10800.000 ; move to first infill point
;WIDTH:0.326405
G1 F2400.000
G1 X103.505 Y108.006 E0.00706 ; infill
;WIDTH:0.360788
G1 X103.918 Y108.155 E0.01160 ; infill
;LAYER_CHANGE
;Z:20
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;20
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.505 Y108.006 E-0.11578 ; wipe and retract
;WIPE_END
G1 E-2.28422 F2400.000 ; retract
G1 Z19.875 F10800.000 ; lift Z
G1 Z20.000 ; move to next layer (99)
;AFTER_LAYER_CHANGE
;20
G1 Z20.075 ; lift Z
G1 X99.826 Y98.041 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.668 Y98.084 E0.00760 ; perimeter
G1 X99.571 Y98.082 E0.00449 ; perimeter
G1 X99.402 Y97.951 E0.00990 ; perimeter
G1 X99.309 Y97.804 E0.00801 ; perimeter
G1 X99.303 Y97.707 E0.00451 ; perimeter
G1 X99.349 Y97.477 E0.01090 ; perimeter
G1 X99.559 Y97.143 E0.01826 ; perimeter
G1 X99.692 Y97.035 E0.00795 ; perimeter
G1 X99.833 Y96.853 E0.01063 ; perimeter
G1 X100.149 Y96.535 E0.02076 ; perimeter
G1 X100.265 Y96.268 E0.01349 ; perimeter
G1 X100.687 Y95.524 E0.03963 ; perimeter
G1 X100.977 Y95.281 E0.01754 ; perimeter
G1 X101.097 Y95.244 E0.00580 ; perimeter
G1 X101.431 Y95.263 E0.01550 ; perimeter
G1 X101.578 Y95.370 E0.00843 ; perimeter
G1 X101.618 Y95.467 E0.00486 ; perimeter
G1 X101.625 Y95.639 E0.00799 ; perimeter
G1 X101.586 Y95.759 E0.00581 ; perimeter
G1 X101.435 Y95.933 E0.01071 ; perimeter
G1 X101.328 Y95.978 E0.00534 ; perimeter
G1 X101.017 Y96.167 E0.01687 ; perimeter
G1 X100.588 Y96.612 E0.02862 ; perimeter
G1 X100.329 Y97.130 E0.02683 ; perimeter
G1 X100.320 Y97.218 E0.00412 ; perimeter
G1 X100.197 Y97.586 E0.01794 ; perimeter
G1 X100.091 Y97.822 E0.01198 ; perimeter
G1 X99.950 Y97.982 E0.00989 ; perimeter
G1 X99.880 Y98.015 E0.00358 ; perimeter
G1 X99.694 Y97.943 F10800.000 ; move inwards before travel
G1 X99.601 Y97.800 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.236887
G1 F2400.000
G1 X99.942 Y97.264 E0.01025 ; infill
G1 X100.136 Y96.916 E0.00642 ; infill
G1 X100.061 Y96.965 F10800.000 ; move to first infill point
;WIDTH:0.325579
G1 F2400.000
G1 X99.813 Y97.479 E0.01341 ; infill
G1 X99.694 Y97.684 E0.00558 ; infill
;WIDTH:0.31823
G1 X99.678 Y97.701 E0.00051 ; infill
;WIDTH:0.294653
G1 X99.557 Y97.746 E0.00270 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.678 Y97.701 E-0.03404 ; wipe and retract
;WIPE_END
G1 E-2.36596 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X100.725 Y95.941 ; move to first infill point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.256538
G1 F2400.000
G1 X101.156 Y95.633 E0.00939 ; infill
G1 X101.372 Y95.555 E0.00408 ; infill
G1 X101.194 Y95.492 F10800.000 ; move to first infill point
;WIDTH:0.197988
G1 F2400.000
G1 X100.812 Y95.926 E0.00746 ; infill
G1 X100.603 Y96.196 E0.00441 ; infill
G1 X100.613 Y96.204 F10800.000 ; move to first infill point
;WIDTH:0.151517
G1 F2400.000
G1 X100.759 Y96.013 E0.00217 ; infill
G1 X101.085 Y95.505 E0.00545 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.759 Y96.013 E-0.15933 ; wipe and retract
G1 X100.613 Y96.204 E-0.06338 ; wipe and retract
;WIPE_END
G1 E-2.17729 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X102.985 Y94.441 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.973 Y94.260 E0.00842 ; perimeter
G1 X103.052 Y94.044 E0.01066 ; perimeter
G1 X103.245 Y93.910 E0.01087 ; perimeter
G1 X103.529 Y93.895 E0.01314 ; perimeter
G1 X103.783 Y93.985 E0.01250 ; perimeter
G1 X104.002 Y94.295 E0.01756 ; perimeter
G1 X103.852 Y94.540 E0.01331 ; perimeter
G1 X103.798 Y94.589 E0.00338 ; perimeter
G1 X103.716 Y94.636 E0.00437 ; perimeter
G1 X103.458 Y94.708 E0.01243 ; perimeter
G1 X103.331 Y94.701 E0.00587 ; perimeter
G1 X103.091 Y94.608 E0.01193 ; perimeter
G1 X103.025 Y94.486 E0.00643 ; perimeter
G1 X103.101 Y94.301 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.973 Y94.260 E-0.06118 ; wipe and retract
G1 X103.052 Y94.044 E-0.06074 ; wipe and retract
G1 X103.245 Y93.910 E-0.06191 ; wipe and retract
G1 X103.529 Y93.895 E-0.07487 ; wipe and retract
G1 X103.783 Y93.985 E-0.07124 ; wipe and retract
G1 X104.002 Y94.295 E-0.10004 ; wipe and retract
G1 X103.852 Y94.540 E-0.07584 ; wipe and retract
G1 X103.798 Y94.589 E-0.01926 ; wipe and retract
G1 X103.716 Y94.636 E-0.02488 ; wipe and retract
G1 X103.458 Y94.708 E-0.07080 ; wipe and retract
G1 X103.331 Y94.701 E-0.03344 ; wipe and retract
G1 X103.091 Y94.608 E-0.06797 ; wipe and retract
G1 X103.025 Y94.486 E-0.03662 ; wipe and retract
;WIPE_END
G1 E-1.64120 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X105.204 Y94.479 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.252 Y94.320 E0.00773 ; perimeter
G1 X105.362 Y94.198 E0.00758 ; perimeter
G1 X105.527 Y94.117 E0.00854 ; perimeter
G1 X105.836 Y94.091 E0.01433 ; perimeter
G1 X106.240 Y94.199 E0.01937 ; perimeter
G1 X106.343 Y94.277 E0.00597 ; perimeter
G1 X106.529 Y94.473 E0.01254 ; perimeter
G1 X106.530 Y94.641 E0.00781 ; perimeter
G1 X106.576 Y94.681 E0.00285 ; perimeter
G1 X106.506 Y94.694 E0.00331 ; perimeter
G1 X106.204 Y94.908 E0.01714 ; perimeter
G1 X105.990 Y94.932 E0.00999 ; perimeter
G1 X105.716 Y94.901 E0.01276 ; perimeter
G1 X105.629 Y94.854 E0.00462 ; perimeter
G1 X105.543 Y94.839 E0.00404 ; perimeter
G1 X105.339 Y94.706 E0.01126 ; perimeter
G1 X105.235 Y94.531 E0.00944 ; perimeter
G1 X105.344 Y94.388 F10800.000 ; move inwards before travel
G1 X105.480 Y94.472 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325969
G1 F2400.000
G1 X105.734 Y94.484 E0.00597 ; infill
;WIDTH:0.346248
G1 X105.782 Y94.490 E0.00122 ; infill
;WIDTH:0.374625
G1 X106.240 Y94.587 E0.01293 ; infill
G1 X106.225 Y94.503 F10800.000 ; move to first infill point
;WIDTH:0.273472
G1 F2400.000
G1 X105.590 Y94.465 E0.01219 ; infill
;WIDTH:0.240521
G1 X105.477 Y94.431 E0.00194 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.590 Y94.465 E-0.03123 ; wipe and retract
;WIPE_END
G1 E-2.36877 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X108.152 Y95.348 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.128 Y95.142 E0.00965 ; perimeter
G1 X108.038 Y95.018 E0.00709 ; perimeter
G1 X108.118 Y94.962 E0.00455 ; perimeter
G1 X108.140 Y94.904 E0.00286 ; perimeter
G1 X108.240 Y94.877 E0.00482 ; perimeter
G1 X108.449 Y94.883 E0.00967 ; perimeter
G1 X108.528 Y94.866 E0.00374 ; perimeter
G1 X108.772 Y94.914 E0.01154 ; perimeter
G1 X108.994 Y95.062 E0.01237 ; perimeter
G1 X109.121 Y95.278 E0.01157 ; perimeter
G1 X109.139 Y95.373 E0.00452 ; perimeter
G1 X109.116 Y95.479 E0.00501 ; perimeter
G1 X108.943 Y95.714 E0.01354 ; perimeter
G1 X108.903 Y95.745 E0.00232 ; perimeter
G1 X108.671 Y95.760 E0.01077 ; perimeter
G1 X108.556 Y95.727 E0.00551 ; perimeter
G1 X108.237 Y95.502 E0.01809 ; perimeter
G1 X108.181 Y95.401 E0.00536 ; perimeter
G1 X108.286 Y95.189 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.128 Y95.142 E-0.06990 ; wipe and retract
G1 X108.038 Y95.018 E-0.04041 ; wipe and retract
G1 X108.118 Y94.962 E-0.02591 ; wipe and retract
G1 X108.140 Y94.904 E-0.01631 ; wipe and retract
G1 X108.240 Y94.877 E-0.02745 ; wipe and retract
G1 X108.449 Y94.883 E-0.05509 ; wipe and retract
G1 X108.528 Y94.866 E-0.02131 ; wipe and retract
G1 X108.772 Y94.914 E-0.06575 ; wipe and retract
G1 X108.994 Y95.062 E-0.07049 ; wipe and retract
G1 X109.121 Y95.278 E-0.06589 ; wipe and retract
G1 X109.139 Y95.373 E-0.02575 ; wipe and retract
G1 X109.116 Y95.479 E-0.02856 ; wipe and retract
G1 X108.943 Y95.714 E-0.07712 ; wipe and retract
G1 X108.903 Y95.745 E-0.01321 ; wipe and retract
G1 X108.671 Y95.760 E-0.06133 ; wipe and retract
G1 X108.556 Y95.727 E-0.03141 ; wipe and retract
G1 X108.237 Y95.502 E-0.10305 ; wipe and retract
G1 X108.181 Y95.401 E-0.03051 ; wipe and retract
;WIPE_END
G1 E-1.57054 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X111.496 Y97.253 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.570 Y97.163 E0.00540 ; perimeter
G1 X111.702 Y97.097 E0.00681 ; perimeter
G1 X111.849 Y97.090 E0.00683 ; perimeter
G1 X112.037 Y97.152 E0.00916 ; perimeter
G1 X112.153 Y97.248 E0.00698 ; perimeter
G1 X112.296 Y97.534 E0.01481 ; perimeter
G1 X112.312 Y97.798 E0.01229 ; perimeter
G1 X112.215 Y98.046 E0.01232 ; perimeter
G1 X112.121 Y98.104 E0.00513 ; perimeter
G1 X112.021 Y98.070 E0.00489 ; perimeter
G1 X111.926 Y98.080 E0.00441 ; perimeter
G1 X111.787 Y98.000 E0.00746 ; perimeter
G1 X111.562 Y97.816 E0.01344 ; perimeter
G1 X111.460 Y97.607 E0.01077 ; perimeter
G1 X111.459 Y97.352 E0.01181 ; perimeter
G1 X111.475 Y97.309 E0.00211 ; perimeter
G1 X111.613 Y97.249 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.570 Y97.163 E-0.04606 ; wipe and retract
G1 X111.702 Y97.097 E-0.03881 ; wipe and retract
G1 X111.849 Y97.090 E-0.03891 ; wipe and retract
G1 X112.037 Y97.152 E-0.05218 ; wipe and retract
G1 X112.153 Y97.248 E-0.03977 ; wipe and retract
G1 X112.296 Y97.534 E-0.08436 ; wipe and retract
G1 X112.312 Y97.798 E-0.07003 ; wipe and retract
G1 X112.215 Y98.046 E-0.07018 ; wipe and retract
G1 X112.121 Y98.104 E-0.02920 ; wipe and retract
G1 X112.021 Y98.070 E-0.02788 ; wipe and retract
G1 X111.926 Y98.080 E-0.02512 ; wipe and retract
G1 X111.787 Y98.000 E-0.04248 ; wipe and retract
G1 X111.562 Y97.816 E-0.07656 ; wipe and retract
G1 X111.460 Y97.607 E-0.06136 ; wipe and retract
G1 X111.459 Y97.352 E-0.06728 ; wipe and retract
G1 X111.475 Y97.309 E-0.01205 ; wipe and retract
;WIPE_END
G1 E-1.61780 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X114.259 Y101.073 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.467 Y101.029 E0.00984 ; perimeter
G1 X114.662 Y101.069 E0.00923 ; perimeter
G1 X114.796 Y101.172 E0.00782 ; perimeter
G1 X114.941 Y101.413 E0.01301 ; perimeter
G1 X114.972 Y101.522 E0.00526 ; perimeter
G1 X114.961 Y101.761 E0.01106 ; perimeter
G1 X114.874 Y101.966 E0.01033 ; perimeter
G1 X114.825 Y101.989 E0.00249 ; perimeter
G1 X114.529 Y101.971 E0.01375 ; perimeter
G1 X114.398 Y101.936 E0.00627 ; perimeter
G1 X114.335 Y101.886 E0.00373 ; perimeter
G1 X114.169 Y101.672 E0.01256 ; perimeter
G1 X114.078 Y101.453 E0.01094 ; perimeter
G1 X114.064 Y101.366 E0.00410 ; perimeter
G1 X114.122 Y101.185 E0.00879 ; perimeter
G1 X114.213 Y101.111 E0.00545 ; perimeter
G1 X114.437 Y101.189 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.467 Y101.029 E-0.07047 ; wipe and retract
G1 X114.662 Y101.069 E-0.05257 ; wipe and retract
G1 X114.796 Y101.172 E-0.04456 ; wipe and retract
G1 X114.941 Y101.413 E-0.07413 ; wipe and retract
G1 X114.972 Y101.522 E-0.02998 ; wipe and retract
G1 X114.961 Y101.761 E-0.06303 ; wipe and retract
G1 X114.874 Y101.966 E-0.05883 ; wipe and retract
G1 X114.825 Y101.989 E-0.01420 ; wipe and retract
G1 X114.529 Y101.971 E-0.07835 ; wipe and retract
G1 X114.398 Y101.936 E-0.03571 ; wipe and retract
G1 X114.335 Y101.886 E-0.02125 ; wipe and retract
G1 X114.169 Y101.672 E-0.07155 ; wipe and retract
G1 X114.078 Y101.453 E-0.06234 ; wipe and retract
G1 X114.064 Y101.366 E-0.02335 ; wipe and retract
G1 X114.122 Y101.185 E-0.05008 ; wipe and retract
G1 X114.213 Y101.111 E-0.03105 ; wipe and retract
;WIPE_END
G1 E-1.61856 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X115.692 Y106.303 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.551 Y106.345 E0.00683 ; perimeter
G1 X115.414 Y106.337 E0.00633 ; perimeter
G1 X115.288 Y106.280 E0.00640 ; perimeter
G1 X115.241 Y106.234 E0.00303 ; perimeter
G1 X115.178 Y106.091 E0.00726 ; perimeter
G1 X115.155 Y105.996 E0.00455 ; perimeter
G1 X115.158 Y105.805 E0.00881 ; perimeter
G1 X115.276 Y105.562 E0.01252 ; perimeter
G1 X115.380 Y105.491 E0.00583 ; perimeter
G1 X115.584 Y105.471 E0.00951 ; perimeter
G1 X115.710 Y105.517 E0.00621 ; perimeter
G1 X115.781 Y105.581 E0.00441 ; perimeter
G1 X115.847 Y105.713 E0.00687 ; perimeter
G1 X115.876 Y105.867 E0.00723 ; perimeter
G1 X115.870 Y105.986 E0.00555 ; perimeter
G1 X115.804 Y106.199 E0.01030 ; perimeter
G1 X115.737 Y106.264 E0.00432 ; perimeter
G1 X115.563 Y106.232 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.551 Y106.345 E-0.05370 ; wipe and retract
G1 X115.414 Y106.337 E-0.03605 ; wipe and retract
G1 X115.288 Y106.280 E-0.03648 ; wipe and retract
G1 X115.241 Y106.234 E-0.01726 ; wipe and retract
G1 X115.178 Y106.091 E-0.04133 ; wipe and retract
G1 X115.155 Y105.996 E-0.02591 ; wipe and retract
G1 X115.158 Y105.805 E-0.05020 ; wipe and retract
G1 X115.276 Y105.562 E-0.07132 ; wipe and retract
G1 X115.380 Y105.491 E-0.03322 ; wipe and retract
G1 X115.584 Y105.471 E-0.05420 ; wipe and retract
G1 X115.710 Y105.517 E-0.03535 ; wipe and retract
G1 X115.781 Y105.581 E-0.02511 ; wipe and retract
G1 X115.847 Y105.713 E-0.03913 ; wipe and retract
G1 X115.876 Y105.867 E-0.04120 ; wipe and retract
G1 X115.870 Y105.986 E-0.03162 ; wipe and retract
G1 X115.804 Y106.199 E-0.05869 ; wipe and retract
G1 X115.737 Y106.264 E-0.02461 ; wipe and retract
;WIPE_END
G1 E-1.72462 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X115.540 Y110.914 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.689 Y110.956 E0.00717 ; perimeter
G1 X115.810 Y111.049 E0.00707 ; perimeter
G1 X115.869 Y111.146 E0.00527 ; perimeter
G1 X115.901 Y111.319 E0.00815 ; perimeter
G1 X115.883 Y111.489 E0.00790 ; perimeter
G1 X115.812 Y111.624 E0.00705 ; perimeter
G1 X115.722 Y111.702 E0.00551 ; perimeter
G1 X115.530 Y111.764 E0.00935 ; perimeter
G1 X115.408 Y111.752 E0.00570 ; perimeter
G1 X115.276 Y111.678 E0.00700 ; perimeter
G1 X115.142 Y111.453 E0.01216 ; perimeter
G1 X115.139 Y111.215 E0.01102 ; perimeter
G1 X115.256 Y111.004 E0.01115 ; perimeter
G1 X115.423 Y110.923 E0.00863 ; perimeter
G1 X115.480 Y110.919 E0.00264 ; perimeter
G1 X115.606 Y111.054 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.689 Y110.956 E-0.05600 ; wipe and retract
G1 X115.810 Y111.049 E-0.04029 ; wipe and retract
G1 X115.869 Y111.146 E-0.03005 ; wipe and retract
G1 X115.901 Y111.319 E-0.04643 ; wipe and retract
G1 X115.883 Y111.489 E-0.04503 ; wipe and retract
G1 X115.812 Y111.624 E-0.04018 ; wipe and retract
G1 X115.722 Y111.702 E-0.03137 ; wipe and retract
G1 X115.530 Y111.764 E-0.05327 ; wipe and retract
G1 X115.408 Y111.752 E-0.03247 ; wipe and retract
G1 X115.276 Y111.678 E-0.03990 ; wipe and retract
G1 X115.142 Y111.453 E-0.06928 ; wipe and retract
G1 X115.139 Y111.215 E-0.06277 ; wipe and retract
G1 X115.256 Y111.004 E-0.06354 ; wipe and retract
G1 X115.423 Y110.923 E-0.04916 ; wipe and retract
G1 X115.480 Y110.919 E-0.01501 ; wipe and retract
;WIPE_END
G1 E-1.72525 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X115.418 Y114.524 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.619 Y114.607 E0.01011 ; perimeter
G1 X115.700 Y114.675 E0.00488 ; perimeter
G1 X115.774 Y114.799 E0.00668 ; perimeter
G1 X115.799 Y114.967 E0.00786 ; perimeter
G1 X115.759 Y115.131 E0.00781 ; perimeter
G1 X115.467 Y115.530 E0.02294 ; perimeter
G1 X115.245 Y115.782 E0.01553 ; perimeter
G1 X115.106 Y115.863 E0.00744 ; perimeter
G1 X114.936 Y115.912 E0.00819 ; perimeter
G1 X114.765 Y115.908 E0.00794 ; perimeter
G1 X114.681 Y115.881 E0.00411 ; perimeter
G1 X114.247 Y115.839 E0.02017 ; perimeter
G1 X113.893 Y115.970 E0.01749 ; perimeter
G1 X113.594 Y116.005 E0.01395 ; perimeter
G1 X113.401 Y115.950 E0.00929 ; perimeter
G1 X113.261 Y115.837 E0.00833 ; perimeter
G1 X113.180 Y115.685 E0.00796 ; perimeter
G1 X113.164 Y115.589 E0.00453 ; perimeter
G1 X113.214 Y115.402 E0.00899 ; perimeter
G1 X113.349 Y115.251 E0.00935 ; perimeter
G1 X113.530 Y115.178 E0.00908 ; perimeter
G1 X113.959 Y115.253 E0.02014 ; perimeter
G1 X114.366 Y115.287 E0.01893 ; perimeter
G1 X114.789 Y114.987 E0.02401 ; perimeter
G1 X115.131 Y114.629 E0.02296 ; perimeter
G1 X115.359 Y114.536 E0.01138 ; perimeter
G1 X115.517 Y114.718 F10800.000 ; move inwards before travel
G1 X115.397 Y114.942 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.370295
G1 F2400.000
G1 X115.060 Y115.330 E0.01399 ; infill
;WIDTH:0.468245
G1 X114.953 Y115.427 E0.00510 ; infill
G1 X114.879 Y115.467 E0.00299 ; infill
;WIDTH:0.447523
G1 X114.404 Y115.612 E0.01668 ; infill
G1 X114.258 Y115.598 F10800.000 ; move to first infill point
;WIDTH:0.367107
G1 F2400.000
G1 X115.273 Y115.385 E0.02794 ; infill
G1 X115.166 Y115.507 F10800.000 ; move to first infill point
;WIDTH:0.134077
G1 F2400.000
G1 X114.430 Y115.574 E0.00560 ; infill
;WIDTH:0.122954
G1 X114.219 Y115.555 E0.00141 ; infill
G1 X113.417 Y115.575 E0.00534 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.219 Y115.555 E-0.21166 ; wipe and retract
G1 X114.430 Y115.574 E-0.05601 ; wipe and retract
;WIPE_END
G1 E-2.13233 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X111.843 Y114.118 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.664 Y114.236 E0.00993 ; perimeter
G1 X111.404 Y114.228 E0.01206 ; perimeter
G1 X111.230 Y114.160 E0.00866 ; perimeter
G1 X111.035 Y114.002 E0.01164 ; perimeter
G1 X110.956 Y113.873 E0.00700 ; perimeter
G1 X110.903 Y113.665 E0.00995 ; perimeter
G1 X110.926 Y113.520 E0.00683 ; perimeter
G1 X110.989 Y113.433 E0.00497 ; perimeter
G1 X111.135 Y113.329 E0.00828 ; perimeter
G1 X111.256 Y113.305 E0.00572 ; perimeter
G1 X111.526 Y113.357 E0.01274 ; perimeter
G1 X111.717 Y113.476 E0.01044 ; perimeter
G1 X111.870 Y113.774 E0.01549 ; perimeter
G1 X111.899 Y113.978 E0.00955 ; perimeter
G1 X111.866 Y114.062 E0.00420 ; perimeter
G1 X111.632 Y114.083 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.664 Y114.236 E-0.07013 ; wipe and retract
G1 X111.404 Y114.228 E-0.06869 ; wipe and retract
G1 X111.230 Y114.160 E-0.04932 ; wipe and retract
G1 X111.035 Y114.002 E-0.06629 ; wipe and retract
G1 X110.956 Y113.873 E-0.03986 ; wipe and retract
G1 X110.903 Y113.665 E-0.05666 ; wipe and retract
G1 X110.926 Y113.520 E-0.03892 ; wipe and retract
G1 X110.989 Y113.433 E-0.02829 ; wipe and retract
G1 X111.135 Y113.329 E-0.04719 ; wipe and retract
G1 X111.256 Y113.305 E-0.03259 ; wipe and retract
G1 X111.526 Y113.357 E-0.07256 ; wipe and retract
G1 X111.717 Y113.476 E-0.05949 ; wipe and retract
G1 X111.870 Y113.774 E-0.08824 ; wipe and retract
G1 X111.899 Y113.978 E-0.05439 ; wipe and retract
G1 X111.866 Y114.062 E-0.02393 ; wipe and retract
;WIPE_END
G1 E-1.60345 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X109.092 Y111.071 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.017 Y111.141 E0.00477 ; perimeter
G1 X108.928 Y111.175 E0.00440 ; perimeter
G1 X108.733 Y111.192 E0.00905 ; perimeter
G1 X108.545 Y111.155 E0.00890 ; perimeter
G1 X108.318 Y111.015 E0.01235 ; perimeter
G1 X108.203 Y110.847 E0.00940 ; perimeter
G1 X108.175 Y110.737 E0.00529 ; perimeter
G1 X108.181 Y110.615 E0.00565 ; perimeter
G1 X108.226 Y110.505 E0.00551 ; perimeter
G1 X108.305 Y110.429 E0.00508 ; perimeter
G1 X108.486 Y110.355 E0.00906 ; perimeter
G1 X108.702 Y110.358 E0.00999 ; perimeter
G1 X108.902 Y110.429 E0.00985 ; perimeter
G1 X109.034 Y110.528 E0.00764 ; perimeter
G1 X109.097 Y110.608 E0.00471 ; perimeter
G1 X109.157 Y110.755 E0.00738 ; perimeter
G1 X109.167 Y110.875 E0.00557 ; perimeter
G1 X109.116 Y111.016 E0.00694 ; perimeter
G1 X108.989 Y111.061 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.017 Y111.141 E-0.04219 ; wipe and retract
G1 X108.928 Y111.175 E-0.02506 ; wipe and retract
G1 X108.733 Y111.192 E-0.05157 ; wipe and retract
G1 X108.545 Y111.155 E-0.05068 ; wipe and retract
G1 X108.318 Y111.015 E-0.07035 ; wipe and retract
G1 X108.203 Y110.847 E-0.05354 ; wipe and retract
G1 X108.175 Y110.737 E-0.03014 ; wipe and retract
G1 X108.181 Y110.615 E-0.03218 ; wipe and retract
G1 X108.226 Y110.505 E-0.03137 ; wipe and retract
G1 X108.305 Y110.429 E-0.02894 ; wipe and retract
G1 X108.486 Y110.355 E-0.05160 ; wipe and retract
G1 X108.702 Y110.358 E-0.05691 ; wipe and retract
G1 X108.902 Y110.429 E-0.05614 ; wipe and retract
G1 X109.034 Y110.528 E-0.04350 ; wipe and retract
G1 X109.097 Y110.608 E-0.02681 ; wipe and retract
G1 X109.157 Y110.755 E-0.04202 ; wipe and retract
G1 X109.167 Y110.875 E-0.03174 ; wipe and retract
G1 X109.116 Y111.016 E-0.03952 ; wipe and retract
;WIPE_END
G1 E-1.63576 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X104.298 Y108.204 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.267 Y108.287 E0.00408 ; perimeter
G1 X104.194 Y108.346 E0.00436 ; perimeter
G1 X104.130 Y108.431 E0.00494 ; perimeter
G1 X103.925 Y108.508 E0.01013 ; perimeter
G1 X103.570 Y108.450 E0.01665 ; perimeter
G1 X103.360 Y108.316 E0.01154 ; perimeter
G1 X103.301 Y108.243 E0.00435 ; perimeter
G1 X103.219 Y108.095 E0.00783 ; perimeter
G1 X103.212 Y107.811 E0.01316 ; perimeter
G1 X103.233 Y107.756 E0.00274 ; perimeter
G1 X103.338 Y107.719 E0.00514 ; perimeter
G1 X103.406 Y107.667 E0.00399 ; perimeter
G1 X103.685 Y107.694 E0.01299 ; perimeter
G1 X103.783 Y107.668 E0.00467 ; perimeter
G1 X103.916 Y107.705 E0.00641 ; perimeter
G1 X104.201 Y107.881 E0.01551 ; perimeter
G1 X104.280 Y108.015 E0.00719 ; perimeter
G1 X104.289 Y108.145 E0.00604 ; perimeter
G1 X104.216 Y108.238 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.267 Y108.287 E-0.03795 ; wipe and retract
G1 X104.194 Y108.346 E-0.02486 ; wipe and retract
G1 X104.130 Y108.431 E-0.02816 ; wipe and retract
G1 X103.925 Y108.508 E-0.05773 ; wipe and retract
G1 X103.570 Y108.450 E-0.09487 ; wipe and retract
G1 X103.360 Y108.316 E-0.06575 ; wipe and retract
G1 X103.301 Y108.243 E-0.02480 ; wipe and retract
G1 X103.219 Y108.095 E-0.04460 ; wipe and retract
G1 X103.212 Y107.811 E-0.07497 ; wipe and retract
G1 X103.233 Y107.756 E-0.01561 ; wipe and retract
G1 X103.338 Y107.719 E-0.02928 ; wipe and retract
G1 X103.406 Y107.667 E-0.02275 ; wipe and retract
G1 X103.685 Y107.694 E-0.07400 ; wipe and retract
G1 X103.783 Y107.668 E-0.02663 ; wipe and retract
G1 X103.916 Y107.705 E-0.03654 ; wipe and retract
G1 X104.201 Y107.881 E-0.08839 ; wipe and retract
G1 X104.280 Y108.015 E-0.04095 ; wipe and retract
G1 X104.289 Y108.145 E-0.03440 ; wipe and retract
;WIPE_END
G1 E-1.57775 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X101.240 Y106.207 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.903 Y106.004 E0.01823 ; perimeter
G1 X100.731 Y105.750 E0.01423 ; perimeter
G1 X100.671 Y105.555 E0.00943 ; perimeter
G1 X100.655 Y105.283 E0.01261 ; perimeter
G1 X100.742 Y105.061 E0.01106 ; perimeter
G1 X100.854 Y104.970 E0.00669 ; perimeter
G1 X100.972 Y104.953 E0.00550 ; perimeter
G1 X101.161 Y105.020 E0.00930 ; perimeter
G1 X101.277 Y105.116 E0.00698 ; perimeter
G1 X101.436 Y105.354 E0.01326 ; perimeter
G1 X101.504 Y105.664 E0.01469 ; perimeter
G1 X101.549 Y105.773 E0.00548 ; perimeter
G1 X101.517 Y105.993 E0.01030 ; perimeter
G1 X101.403 Y106.196 E0.01075 ; perimeter
G1 X101.300 Y106.208 E0.00480 ; perimeter
G1 X101.094 Y105.842 F10800.000 ; move inwards before travel
G1 X101.289 Y105.890 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.270199
G1 F2400.000
G1 X101.007 Y105.348 E0.01153 ; infill
G1 X100.989 Y105.277 E0.00138 ; infill
;WIDTH:0.2345
G1 X100.970 Y105.206 E0.00117 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.989 Y105.277 E-0.01933 ; wipe and retract
;WIPE_END
G1 E-2.38067 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 X100.091 Y102.129 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.996 Y102.168 E0.00477 ; perimeter
G1 X99.763 Y102.167 E0.01081 ; perimeter
G1 X99.585 Y102.096 E0.00888 ; perimeter
G1 X99.443 Y101.843 E0.01340 ; perimeter
G1 X99.429 Y101.686 E0.00730 ; perimeter
G1 X99.497 Y101.511 E0.00874 ; perimeter
G1 X99.583 Y101.399 E0.00649 ; perimeter
G1 X99.896 Y101.349 E0.01469 ; perimeter
G1 X100.060 Y101.416 E0.00825 ; perimeter
G1 X100.178 Y101.503 E0.00677 ; perimeter
G1 X100.264 Y101.643 E0.00761 ; perimeter
G1 X100.287 Y101.773 E0.00611 ; perimeter
G1 X100.259 Y101.951 E0.00836 ; perimeter
G1 X100.186 Y102.058 E0.00599 ; perimeter
G1 X100.139 Y102.093 E0.00269 ; perimeter
G1 X100.002 Y102.078 F10800.000 ; move inwards before travel
G1 X99.921 Y101.812 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.304234
G1 F2400.000
G1 X99.907 Y101.796 E0.00046 ; infill
;WIDTH:0.336338
G1 X99.893 Y101.780 E0.00052 ; infill
;LAYER_CHANGE
;Z:20.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;20.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.907 Y101.796 E-0.00559 ; wipe and retract
;WIPE_END
G1 E-2.39441 F2400.000 ; retract
G1 Z20.075 F10800.000 ; lift Z
G1 Z20.200 ; move to next layer (100)
;AFTER_LAYER_CHANGE
;20.2
G1 Z20.275 ; lift Z
G1 X111.438 Y97.569 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.452 Y97.269 E0.01391 ; perimeter
G1 X111.588 Y97.081 E0.01077 ; perimeter
G1 X111.671 Y97.032 E0.00445 ; perimeter
G1 X111.817 Y97.027 E0.00675 ; perimeter
G1 X111.990 Y97.088 E0.00850 ; perimeter
G1 X112.144 Y97.224 E0.00953 ; perimeter
G1 X112.248 Y97.468 E0.01229 ; perimeter
G1 X112.253 Y97.701 E0.01078 ; perimeter
G1 X112.137 Y97.876 E0.00976 ; perimeter
G1 X111.989 Y97.966 E0.00802 ; perimeter
G1 X111.911 Y97.973 E0.00359 ; perimeter
G1 X111.800 Y97.908 E0.00596 ; perimeter
G1 X111.700 Y97.882 E0.00477 ; perimeter
G1 X111.524 Y97.748 E0.01022 ; perimeter
G1 X111.462 Y97.625 E0.00643 ; perimeter
G1 X111.663 Y97.370 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.452 Y97.269 E-0.09377 ; wipe and retract
G1 X111.588 Y97.081 E-0.06138 ; wipe and retract
G1 X111.671 Y97.032 E-0.02534 ; wipe and retract
G1 X111.817 Y97.027 E-0.03847 ; wipe and retract
G1 X111.990 Y97.088 E-0.04843 ; wipe and retract
G1 X112.144 Y97.224 E-0.05428 ; wipe and retract
G1 X112.248 Y97.468 E-0.07003 ; wipe and retract
G1 X112.253 Y97.701 E-0.06140 ; wipe and retract
G1 X112.137 Y97.876 E-0.05559 ; wipe and retract
G1 X111.989 Y97.966 E-0.04570 ; wipe and retract
G1 X111.911 Y97.973 E-0.02046 ; wipe and retract
G1 X111.800 Y97.908 E-0.03394 ; wipe and retract
G1 X111.700 Y97.882 E-0.02716 ; wipe and retract
G1 X111.524 Y97.748 E-0.05825 ; wipe and retract
G1 X111.462 Y97.625 E-0.03666 ; wipe and retract
;WIPE_END
G1 E-1.66914 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X114.179 Y101.042 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.449 Y100.989 E0.01272 ; perimeter
G1 X114.642 Y101.039 E0.00925 ; perimeter
G1 X114.760 Y101.135 E0.00703 ; perimeter
G1 X114.911 Y101.444 E0.01593 ; perimeter
G1 X114.893 Y101.670 E0.01051 ; perimeter
G1 X114.751 Y101.861 E0.01102 ; perimeter
G1 X114.704 Y101.887 E0.00249 ; perimeter
G1 X114.511 Y101.885 E0.00895 ; perimeter
G1 X114.393 Y101.855 E0.00565 ; perimeter
G1 X114.226 Y101.737 E0.00946 ; perimeter
G1 X114.154 Y101.653 E0.00512 ; perimeter
G1 X114.064 Y101.475 E0.00925 ; perimeter
G1 X114.035 Y101.288 E0.00877 ; perimeter
G1 X114.072 Y101.136 E0.00723 ; perimeter
G1 X114.134 Y101.082 E0.00385 ; perimeter
G1 X114.411 Y101.191 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.449 Y100.989 E-0.08657 ; wipe and retract
G1 X114.642 Y101.039 E-0.05269 ; wipe and retract
G1 X114.760 Y101.135 E-0.04004 ; wipe and retract
G1 X114.911 Y101.444 E-0.09077 ; wipe and retract
G1 X114.893 Y101.670 E-0.05989 ; wipe and retract
G1 X114.751 Y101.861 E-0.06278 ; wipe and retract
G1 X114.704 Y101.887 E-0.01416 ; wipe and retract
G1 X114.511 Y101.885 E-0.05101 ; wipe and retract
G1 X114.393 Y101.855 E-0.03218 ; wipe and retract
G1 X114.226 Y101.737 E-0.05392 ; wipe and retract
G1 X114.154 Y101.653 E-0.02914 ; wipe and retract
G1 X114.064 Y101.475 E-0.05267 ; wipe and retract
G1 X114.035 Y101.288 E-0.04994 ; wipe and retract
G1 X114.072 Y101.136 E-0.04118 ; wipe and retract
G1 X114.134 Y101.082 E-0.02192 ; wipe and retract
;WIPE_END
G1 E-1.66112 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X115.679 Y106.377 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.544 Y106.418 E0.00653 ; perimeter
G1 X115.409 Y106.409 E0.00625 ; perimeter
G1 X115.309 Y106.362 E0.00516 ; perimeter
G1 X115.237 Y106.286 E0.00482 ; perimeter
G1 X115.155 Y106.050 E0.01158 ; perimeter
G1 X115.158 Y105.865 E0.00859 ; perimeter
G1 X115.245 Y105.659 E0.01035 ; perimeter
G1 X115.453 Y105.534 E0.01120 ; perimeter
G1 X115.546 Y105.533 E0.00432 ; perimeter
G1 X115.713 Y105.589 E0.00815 ; perimeter
G1 X115.777 Y105.644 E0.00391 ; perimeter
G1 X115.839 Y105.758 E0.00602 ; perimeter
G1 X115.873 Y106.025 E0.01247 ; perimeter
G1 X115.798 Y106.263 E0.01156 ; perimeter
G1 X115.722 Y106.336 E0.00487 ; perimeter
G1 X115.555 Y106.310 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.544 Y106.418 E-0.05181 ; wipe and retract
G1 X115.409 Y106.409 E-0.03563 ; wipe and retract
G1 X115.309 Y106.362 E-0.02937 ; wipe and retract
G1 X115.237 Y106.286 E-0.02746 ; wipe and retract
G1 X115.155 Y106.050 E-0.06597 ; wipe and retract
G1 X115.158 Y105.865 E-0.04893 ; wipe and retract
G1 X115.245 Y105.659 E-0.05899 ; wipe and retract
G1 X115.453 Y105.534 E-0.06381 ; wipe and retract
G1 X115.546 Y105.533 E-0.02461 ; wipe and retract
G1 X115.713 Y105.589 E-0.04642 ; wipe and retract
G1 X115.777 Y105.644 E-0.02228 ; wipe and retract
G1 X115.839 Y105.758 E-0.03427 ; wipe and retract
G1 X115.873 Y106.025 E-0.07105 ; wipe and retract
G1 X115.798 Y106.263 E-0.06585 ; wipe and retract
G1 X115.722 Y106.336 E-0.02777 ; wipe and retract
;WIPE_END
G1 E-1.72576 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X115.570 Y110.868 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.675 Y110.896 E0.00507 ; perimeter
G1 X115.818 Y111.007 E0.00835 ; perimeter
G1 X115.869 Y111.094 E0.00467 ; perimeter
G1 X115.901 Y111.271 E0.00836 ; perimeter
G1 X115.889 Y111.408 E0.00635 ; perimeter
G1 X115.810 Y111.573 E0.00847 ; perimeter
G1 X115.723 Y111.650 E0.00539 ; perimeter
G1 X115.569 Y111.704 E0.00758 ; perimeter
G1 X115.387 Y111.690 E0.00846 ; perimeter
G1 X115.272 Y111.623 E0.00612 ; perimeter
G1 X115.142 Y111.408 E0.01166 ; perimeter
G1 X115.125 Y111.283 E0.00587 ; perimeter
G1 X115.141 Y111.151 E0.00612 ; perimeter
G1 X115.253 Y110.951 E0.01063 ; perimeter
G1 X115.413 Y110.874 E0.00823 ; perimeter
G1 X115.510 Y110.870 E0.00448 ; perimeter
G1 X115.616 Y110.967 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.675 Y110.896 E-0.04426 ; wipe and retract
G1 X115.818 Y111.007 E-0.04756 ; wipe and retract
G1 X115.869 Y111.094 E-0.02662 ; wipe and retract
G1 X115.901 Y111.271 E-0.04761 ; wipe and retract
G1 X115.889 Y111.408 E-0.03617 ; wipe and retract
G1 X115.810 Y111.573 E-0.04827 ; wipe and retract
G1 X115.723 Y111.650 E-0.03073 ; wipe and retract
G1 X115.569 Y111.704 E-0.04321 ; wipe and retract
G1 X115.387 Y111.690 E-0.04819 ; wipe and retract
G1 X115.272 Y111.623 E-0.03487 ; wipe and retract
G1 X115.142 Y111.408 E-0.06643 ; wipe and retract
G1 X115.125 Y111.283 E-0.03342 ; wipe and retract
G1 X115.141 Y111.151 E-0.03489 ; wipe and retract
G1 X115.253 Y110.951 E-0.06054 ; wipe and retract
G1 X115.413 Y110.874 E-0.04690 ; wipe and retract
G1 X115.510 Y110.870 E-0.02551 ; wipe and retract
;WIPE_END
G1 E-1.72481 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X115.531 Y114.572 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.694 Y114.681 E0.00907 ; perimeter
G1 X115.774 Y114.818 E0.00738 ; perimeter
G1 X115.796 Y114.968 E0.00705 ; perimeter
G1 X115.754 Y115.137 E0.00806 ; perimeter
G1 X115.374 Y115.651 E0.02961 ; perimeter
G1 X115.236 Y115.788 E0.00898 ; perimeter
G1 X115.114 Y115.852 E0.00639 ; perimeter
G1 X115.006 Y115.880 E0.00520 ; perimeter
G1 X114.791 Y115.874 E0.00994 ; perimeter
G1 X114.546 Y115.797 E0.01191 ; perimeter
G1 X114.222 Y115.792 E0.01502 ; perimeter
G1 X113.785 Y115.943 E0.02141 ; perimeter
G1 X113.561 Y115.967 E0.01045 ; perimeter
G1 X113.379 Y115.908 E0.00885 ; perimeter
G1 X113.232 Y115.786 E0.00884 ; perimeter
G1 X113.166 Y115.658 E0.00668 ; perimeter
G1 X113.151 Y115.532 E0.00589 ; perimeter
G1 X113.194 Y115.363 E0.00805 ; perimeter
G1 X113.324 Y115.211 E0.00929 ; perimeter
G1 X113.489 Y115.153 E0.00809 ; perimeter
G1 X113.741 Y115.179 E0.01176 ; perimeter
G1 X113.957 Y115.236 E0.01036 ; perimeter
G1 X114.381 Y115.285 E0.01974 ; perimeter
G1 X114.755 Y115.024 E0.02111 ; perimeter
G1 X115.131 Y114.630 E0.02525 ; perimeter
G1 X115.342 Y114.542 E0.01056 ; perimeter
G1 X115.473 Y114.560 E0.00612 ; perimeter
G1 X115.566 Y114.764 F10800.000 ; move inwards before travel
G1 X115.379 Y114.959 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.374912
G1 F2400.000
G1 X115.040 Y115.362 E0.01454 ; infill
G1 X114.954 Y115.431 E0.00305 ; infill
G1 X115.001 Y115.632 E0.00572 ; infill
G1 X115.305 Y115.339 F10800.000 ; move to first infill point
;WIDTH:0.165007
G1 F2400.000
G1 X114.472 Y115.527 E0.00867 ; infill
G1 X114.190 Y115.537 F10800.000 ; move to first infill point
;WIDTH:0.218912
G1 F2400.000
G1 X113.404 Y115.594 E0.01153 ; infill
G1 X111.962 Y114.232 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.816 Y114.309 E0.00764 ; perimeter
G1 X111.495 Y114.297 E0.01488 ; perimeter
G1 X111.320 Y114.219 E0.00889 ; perimeter
G1 X111.108 Y114.036 E0.01295 ; perimeter
G1 X111.045 Y113.930 E0.00571 ; perimeter
G1 X110.997 Y113.757 E0.00831 ; perimeter
G1 X111.008 Y113.596 E0.00750 ; perimeter
G1 X111.069 Y113.512 E0.00483 ; perimeter
G1 X111.090 Y113.442 E0.00337 ; perimeter
G1 X111.325 Y113.306 E0.01259 ; perimeter
G1 X111.587 Y113.347 E0.01231 ; perimeter
G1 X111.797 Y113.505 E0.01215 ; perimeter
G1 X112.008 Y113.870 E0.01956 ; perimeter
G1 X112.033 Y114.084 E0.00999 ; perimeter
G1 X111.998 Y114.185 E0.00492 ; perimeter
G1 X111.802 Y114.193 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.816 Y114.309 E-0.05804 ; wipe and retract
G1 X111.495 Y114.297 E-0.08479 ; wipe and retract
G1 X111.320 Y114.219 E-0.05067 ; wipe and retract
G1 X111.108 Y114.036 E-0.07378 ; wipe and retract
G1 X111.045 Y113.930 E-0.03255 ; wipe and retract
G1 X110.997 Y113.757 E-0.04736 ; wipe and retract
G1 X111.008 Y113.596 E-0.04271 ; wipe and retract
G1 X111.069 Y113.512 E-0.02751 ; wipe and retract
G1 X111.090 Y113.442 E-0.01917 ; wipe and retract
G1 X111.325 Y113.306 E-0.07170 ; wipe and retract
G1 X111.587 Y113.347 E-0.07014 ; wipe and retract
G1 X111.797 Y113.505 E-0.06920 ; wipe and retract
G1 X112.008 Y113.870 E-0.11140 ; wipe and retract
G1 X112.033 Y114.084 E-0.05694 ; wipe and retract
G1 X111.998 Y114.185 E-0.02805 ; wipe and retract
;WIPE_END
G1 E-1.55597 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X109.165 Y111.148 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.120 Y111.190 E0.00284 ; perimeter
G1 X109.011 Y111.227 E0.00534 ; perimeter
G1 X108.816 Y111.240 E0.00904 ; perimeter
G1 X108.616 Y111.185 E0.00963 ; perimeter
G1 X108.435 Y111.074 E0.00981 ; perimeter
G1 X108.301 Y110.871 E0.01127 ; perimeter
G1 X108.275 Y110.756 E0.00548 ; perimeter
G1 X108.288 Y110.647 E0.00508 ; perimeter
G1 X108.333 Y110.551 E0.00492 ; perimeter
G1 X108.404 Y110.481 E0.00460 ; perimeter
G1 X108.595 Y110.400 E0.00963 ; perimeter
G1 X108.815 Y110.408 E0.01017 ; perimeter
G1 X109.008 Y110.478 E0.00956 ; perimeter
G1 X109.140 Y110.577 E0.00761 ; perimeter
G1 X109.201 Y110.654 E0.00456 ; perimeter
G1 X109.263 Y110.809 E0.00771 ; perimeter
G1 X109.268 Y110.918 E0.00509 ; perimeter
G1 X109.202 Y111.103 E0.00906 ; perimeter
G1 X109.104 Y111.141 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.120 Y111.190 E-0.03159 ; wipe and retract
G1 X109.011 Y111.227 E-0.03041 ; wipe and retract
G1 X108.816 Y111.240 E-0.05152 ; wipe and retract
G1 X108.616 Y111.185 E-0.05487 ; wipe and retract
G1 X108.435 Y111.074 E-0.05590 ; wipe and retract
G1 X108.301 Y110.871 E-0.06419 ; wipe and retract
G1 X108.275 Y110.756 E-0.03122 ; wipe and retract
G1 X108.288 Y110.647 E-0.02893 ; wipe and retract
G1 X108.333 Y110.551 E-0.02800 ; wipe and retract
G1 X108.404 Y110.481 E-0.02623 ; wipe and retract
G1 X108.595 Y110.400 E-0.05486 ; wipe and retract
G1 X108.815 Y110.408 E-0.05795 ; wipe and retract
G1 X109.008 Y110.478 E-0.05446 ; wipe and retract
G1 X109.140 Y110.577 E-0.04336 ; wipe and retract
G1 X109.201 Y110.654 E-0.02599 ; wipe and retract
G1 X109.263 Y110.809 E-0.04391 ; wipe and retract
G1 X109.268 Y110.918 E-0.02902 ; wipe and retract
G1 X109.202 Y111.103 E-0.05161 ; wipe and retract
;WIPE_END
G1 E-1.63597 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X104.363 Y108.404 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.309 Y108.452 E0.00335 ; perimeter
G1 X104.080 Y108.543 E0.01138 ; perimeter
G1 X103.722 Y108.495 E0.01675 ; perimeter
G1 X103.521 Y108.381 E0.01069 ; perimeter
G1 X103.411 Y108.262 E0.00751 ; perimeter
G1 X103.356 Y108.104 E0.00778 ; perimeter
G1 X103.347 Y107.971 E0.00614 ; perimeter
G1 X103.373 Y107.906 E0.00325 ; perimeter
G1 X103.435 Y107.795 E0.00588 ; perimeter
G1 X103.527 Y107.730 E0.00524 ; perimeter
G1 X103.849 Y107.655 E0.01532 ; perimeter
G1 X104.070 Y107.726 E0.01076 ; perimeter
G1 X104.345 Y107.915 E0.01547 ; perimeter
G1 X104.422 Y108.046 E0.00705 ; perimeter
G1 X104.437 Y108.204 E0.00731 ; perimeter
G1 X104.383 Y108.348 E0.00713 ; perimeter
G1 X104.291 Y108.397 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.309 Y108.452 E-0.03387 ; wipe and retract
G1 X104.080 Y108.543 E-0.06480 ; wipe and retract
G1 X103.722 Y108.495 E-0.09544 ; wipe and retract
G1 X103.521 Y108.381 E-0.06090 ; wipe and retract
G1 X103.411 Y108.262 E-0.04277 ; wipe and retract
G1 X103.356 Y108.104 E-0.04433 ; wipe and retract
G1 X103.347 Y107.971 E-0.03501 ; wipe and retract
G1 X103.373 Y107.906 E-0.01851 ; wipe and retract
G1 X103.435 Y107.795 E-0.03352 ; wipe and retract
G1 X103.527 Y107.730 E-0.02983 ; wipe and retract
G1 X103.849 Y107.655 E-0.08727 ; wipe and retract
G1 X104.070 Y107.726 E-0.06128 ; wipe and retract
G1 X104.345 Y107.915 E-0.08812 ; wipe and retract
G1 X104.422 Y108.046 E-0.04016 ; wipe and retract
G1 X104.437 Y108.204 E-0.04164 ; wipe and retract
G1 X104.383 Y108.348 E-0.04063 ; wipe and retract
;WIPE_END
G1 E-1.58192 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X101.245 Y106.018 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.116 Y106.002 E0.00599 ; perimeter
G1 X100.962 Y105.936 E0.00775 ; perimeter
G1 X100.827 Y105.823 E0.00817 ; perimeter
G1 X100.678 Y105.613 E0.01192 ; perimeter
G1 X100.615 Y105.434 E0.00879 ; perimeter
G1 X100.583 Y105.182 E0.01178 ; perimeter
G1 X100.602 Y105.055 E0.00593 ; perimeter
G1 X100.695 Y104.845 E0.01067 ; perimeter
G1 X100.771 Y104.773 E0.00486 ; perimeter
G1 X100.927 Y104.767 E0.00722 ; perimeter
G1 X101.161 Y104.892 E0.01229 ; perimeter
G1 X101.272 Y105.016 E0.00770 ; perimeter
G1 X101.391 Y105.222 E0.01102 ; perimeter
G1 X101.474 Y105.589 E0.01745 ; perimeter
G1 X101.450 Y105.802 E0.00995 ; perimeter
G1 X101.298 Y105.990 E0.01120 ; perimeter
G1 X101.152 Y105.927 F10800.000 ; move inwards before travel
G1 X101.179 Y105.760 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.301982
G1 F2400.000
G1 X100.949 Y105.189 E0.01327 ; infill
;WIDTH:0.285385
G1 X100.873 Y105.039 E0.00340 ; infill
G1 X100.868 Y105.049 F10800.000 ; move to first infill point
;WIDTH:0.320945
G1 F2400.000
G1 X101.097 Y105.574 E0.01322 ; infill
;WIDTH:0.220067
G1 X101.191 Y105.746 E0.00289 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.097 Y105.574 E-0.05178 ; wipe and retract
;WIPE_END
G1 E-2.34822 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X100.018 Y102.162 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.821 Y102.178 E0.00918 ; perimeter
G1 X99.627 Y102.081 E0.01002 ; perimeter
G1 X99.500 Y101.868 E0.01148 ; perimeter
G1 X99.494 Y101.687 E0.00839 ; perimeter
G1 X99.521 Y101.591 E0.00461 ; perimeter
G1 X99.631 Y101.436 E0.00885 ; perimeter
G1 X99.687 Y101.402 E0.00300 ; perimeter
G1 X99.981 Y101.379 E0.01369 ; perimeter
G1 X100.214 Y101.494 E0.01201 ; perimeter
G1 X100.313 Y101.646 E0.00841 ; perimeter
G1 X100.336 Y101.787 E0.00658 ; perimeter
G1 X100.310 Y101.962 E0.00821 ; perimeter
G1 X100.199 Y102.095 E0.00802 ; perimeter
G1 X100.074 Y102.141 E0.00616 ; perimeter
G1 X99.879 Y102.021 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.821 Y102.178 E-0.06765 ; wipe and retract
G1 X99.627 Y102.081 E-0.05711 ; wipe and retract
G1 X99.500 Y101.868 E-0.06538 ; wipe and retract
G1 X99.494 Y101.687 E-0.04779 ; wipe and retract
G1 X99.521 Y101.591 E-0.02628 ; wipe and retract
G1 X99.631 Y101.436 E-0.05039 ; wipe and retract
G1 X99.687 Y101.402 E-0.01710 ; wipe and retract
G1 X99.981 Y101.379 E-0.07801 ; wipe and retract
G1 X100.214 Y101.494 E-0.06844 ; wipe and retract
G1 X100.313 Y101.646 E-0.04790 ; wipe and retract
G1 X100.336 Y101.787 E-0.03749 ; wipe and retract
G1 X100.310 Y101.962 E-0.04678 ; wipe and retract
G1 X100.199 Y102.095 E-0.04568 ; wipe and retract
G1 X100.074 Y102.141 E-0.03512 ; wipe and retract
;WIPE_END
G1 E-1.70888 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X99.967 Y97.948 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.614 Y98.011 E0.01662 ; perimeter
G1 X99.413 Y97.858 E0.01169 ; perimeter
G1 X99.367 Y97.783 E0.00408 ; perimeter
G1 X99.354 Y97.584 E0.00927 ; perimeter
G1 X99.395 Y97.404 E0.00854 ; perimeter
G1 X99.683 Y96.935 E0.02547 ; perimeter
G1 X99.917 Y96.654 E0.01696 ; perimeter
G1 X100.570 Y95.612 E0.05694 ; perimeter
G1 X100.685 Y95.501 E0.00743 ; perimeter
G1 X100.805 Y95.434 E0.00634 ; perimeter
G1 X100.960 Y95.302 E0.00945 ; perimeter
G1 X101.169 Y95.270 E0.00981 ; perimeter
G1 X101.287 Y95.281 E0.00545 ; perimeter
G1 X101.429 Y95.344 E0.00719 ; perimeter
G1 X101.457 Y95.362 E0.00159 ; perimeter
G1 X101.536 Y95.529 E0.00856 ; perimeter
G1 X101.536 Y95.660 E0.00605 ; perimeter
G1 X101.500 Y95.815 E0.00735 ; perimeter
G1 X101.376 Y95.981 E0.00962 ; perimeter
G1 X101.300 Y96.022 E0.00400 ; perimeter
G1 X100.796 Y96.531 E0.03319 ; perimeter
G1 X100.361 Y97.249 E0.03890 ; perimeter
G1 X100.134 Y97.783 E0.02687 ; perimeter
G1 X100.006 Y97.902 E0.00810 ; perimeter
G1 X99.666 Y97.752 F10800.000 ; move inwards before travel
G1 X99.649 Y97.725 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.339972
G1 F2400.000
G1 X99.745 Y97.599 E0.00392 ; infill
;WIDTH:0.350647
G1 X99.811 Y97.512 E0.00280 ; infill
G1 X99.974 Y97.190 E0.00923 ; infill
;WIDTH:0.242903
G1 X100.534 Y96.312 E0.01732 ; infill
;WIDTH:0.284375
G1 X100.651 Y96.164 E0.00379 ; infill
;WIDTH:0.330786
G1 X100.885 Y95.868 E0.00903 ; infill
G1 X101.087 Y95.699 E0.00629 ; infill
;WIDTH:0.338491
G1 X101.132 Y95.662 E0.00144 ; infill
;WIDTH:0.245098
G1 X101.200 Y95.600 E0.00155 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.132 Y95.662 E-0.02430 ; wipe and retract
;WIPE_END
G1 E-2.37570 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 X103.139 Y94.608 ; move to first perimeter point
G1 Z20.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.021 Y94.385 E0.01165 ; perimeter
G1 X102.999 Y94.276 E0.00517 ; perimeter
G1 X103.070 Y94.065 E0.01029 ; perimeter
G1 X103.114 Y94.013 E0.00317 ; perimeter
G1 X103.259 Y93.927 E0.00782 ; perimeter
G1 X103.330 Y93.910 E0.00338 ; perimeter
G1 X103.440 Y93.904 E0.00510 ; perimeter
G1 X103.702 Y93.976 E0.01258 ; perimeter
G1 X103.907 Y94.293 E0.01750 ; perimeter
G1 X103.806 Y94.510 E0.01110 ; perimeter
G1 X103.661 Y94.650 E0.00935 ; perimeter
G1 X103.497 Y94.712 E0.00811 ; perimeter
G1 X103.349 Y94.705 E0.00687 ; perimeter
G1 X103.193 Y94.633 E0.00793 ; perimeter
G1 X103.212 Y94.367 F10800.000 ; move inwards before travel
G1 X103.435 Y94.310 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350825
G1 F2400.000
G1 X103.439 Y94.313 E0.00013 ; infill
G1 X105.395 Y94.493 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.436 Y94.346 E0.00709 ; perimeter
G1 X105.606 Y94.187 E0.01077 ; perimeter
G1 X105.729 Y94.135 E0.00619 ; perimeter
G1 X106.045 Y94.123 E0.01465 ; perimeter
G1 X106.392 Y94.216 E0.01664 ; perimeter
G1 X106.513 Y94.308 E0.00706 ; perimeter
G1 X106.642 Y94.363 E0.00649 ; perimeter
G1 X106.803 Y94.518 E0.01032 ; perimeter
G1 X107.283 Y94.674 E0.02338 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.360 Y94.699 E0.00339 ; perimeter (bridge)
G1 X107.601 Y94.712 E0.01009 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.268 Y94.750 E0.03097 ; perimeter
G1 X108.725 Y94.844 E0.02160 ; perimeter
G1 X109.018 Y95.018 E0.01577 ; perimeter
G1 X109.114 Y95.185 E0.00892 ; perimeter
G1 X109.136 Y95.307 E0.00573 ; perimeter
G1 X109.105 Y95.428 E0.00583 ; perimeter
G1 X109.004 Y95.603 E0.00934 ; perimeter
G1 X108.881 Y95.683 E0.00678 ; perimeter
G1 X108.615 Y95.691 E0.01235 ; perimeter
G1 X108.376 Y95.599 E0.01186 ; perimeter
G1 X108.265 Y95.512 E0.00653 ; perimeter
G1 X108.109 Y95.432 E0.00814 ; perimeter
G1 X107.993 Y95.225 E0.01100 ; perimeter
G1 X107.750 Y95.147 E0.01181 ; perimeter
G1 X107.680 Y95.051 E0.00550 ; perimeter
G1 X107.337 Y94.896 E0.01746 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.113 Y94.846 E0.00957 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.985 Y94.824 E0.00606 ; perimeter
G1 X106.751 Y94.849 E0.01089 ; perimeter
G1 X106.486 Y94.926 E0.01275 ; perimeter
G1 X106.197 Y94.968 E0.01353 ; perimeter
G1 X105.894 Y94.933 E0.01415 ; perimeter
G1 X105.710 Y94.872 E0.00898 ; perimeter
G1 X105.530 Y94.741 E0.01029 ; perimeter
G1 X105.422 Y94.591 E0.00860 ; perimeter
G1 X105.414 Y94.550 E0.00192 ; perimeter
G1 X105.528 Y94.419 F10800.000 ; move inwards before travel
G1 X105.642 Y94.485 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.349455
G1 F2400.000
G1 X106.192 Y94.570 E0.01417 ; infill
G1 X106.530 Y94.590 E0.00865 ; infill
G1 X106.514 Y94.574 F10800.000 ; move to first infill point
;WIDTH:0.28747
G1 F2400.000
G1 X105.807 Y94.495 E0.01446 ; infill
G1 X105.656 Y94.504 E0.00307 ; infill
G1 X105.657 Y94.470 F10800.000 ; move to first infill point
;WIDTH:0.250527
G1 F2400.000
G1 X106.577 Y94.649 E0.01618 ; infill
G1 X108.192 Y95.087 F10800.000 ; move to first infill point
;WIDTH:0.327865
G1 F2400.000
G1 X108.460 Y95.181 E0.00674 ; infill
;WIDTH:0.338221
G1 X108.872 Y95.349 E0.01091 ; infill
G1 X108.859 Y95.371 F10800.000 ; move to first infill point
;WIDTH:0.351709
G1 F2400.000
G1 X108.588 Y95.238 E0.00776 ; infill
G1 X108.216 Y95.129 E0.00997 ; infill
;LAYER_CHANGE
;Z:20.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;20.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.588 Y95.238 E-0.10243 ; wipe and retract
G1 X108.859 Y95.371 E-0.07973 ; wipe and retract
;WIPE_END
G1 E-2.21783 F2400.000 ; retract
G1 Z20.275 F10800.000 ; lift Z
G1 Z20.400 ; move to next layer (101)
;AFTER_LAYER_CHANGE
;20.4
G1 Z20.475 ; lift Z
G1 X101.504 Y95.850 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.399 Y95.990 E0.00809 ; perimeter
G1 X101.262 Y96.082 E0.00767 ; perimeter
G1 X100.891 Y96.458 E0.02444 ; perimeter
G1 X100.370 Y97.361 E0.04831 ; perimeter
G1 X100.152 Y97.800 E0.02268 ; perimeter
G1 X100.030 Y97.891 E0.00705 ; perimeter
G1 X99.786 Y97.974 E0.01192 ; perimeter
G1 X99.649 Y97.947 E0.00646 ; perimeter
G1 X99.492 Y97.877 E0.00796 ; perimeter
G1 X99.414 Y97.746 E0.00709 ; perimeter
G1 X99.380 Y97.579 E0.00786 ; perimeter
G1 X99.451 Y97.317 E0.01260 ; perimeter
G1 X99.762 Y96.802 E0.02785 ; perimeter
G1 X100.516 Y95.657 E0.06351 ; perimeter
G1 X100.703 Y95.464 E0.01246 ; perimeter
G1 X100.932 Y95.332 E0.01221 ; perimeter
G1 X101.219 Y95.290 E0.01345 ; perimeter
G1 X101.434 Y95.374 E0.01068 ; perimeter
G1 X101.518 Y95.571 E0.00992 ; perimeter
G1 X101.507 Y95.790 E0.01015 ; perimeter
G1 X101.331 Y95.875 F10800.000 ; move inwards before travel
G1 X101.253 Y95.783 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.324718
G1 F2400.000
G1 X101.115 Y95.705 E0.00371 ; infill
G1 X101.014 Y95.757 E0.00268 ; infill
G1 X100.835 Y95.925 E0.00575 ; infill
G1 X100.601 Y96.215 E0.00874 ; infill
;WIDTH:0.315758
G1 X100.102 Y97.019 E0.02148 ; infill
G1 X99.836 Y97.492 E0.01231 ; infill
G1 X99.825 Y97.519 E0.00066 ; infill
G1 X99.943 Y97.655 E0.00408 ; infill
G1 X100.546 Y96.043 F10800.000 ; move to first infill point
;WIDTH:0.230784
G1 F2400.000
G1 X101.260 Y95.582 E0.01329 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.546 Y96.043 E-0.22449 ; wipe and retract
;WIPE_END
G1 E-2.17551 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X103.121 Y94.626 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.025 Y94.442 E0.00959 ; perimeter
G1 X103.025 Y94.292 E0.00696 ; perimeter
G1 X103.092 Y94.074 E0.01060 ; perimeter
G1 X103.132 Y94.027 E0.00284 ; perimeter
G1 X103.247 Y93.963 E0.00611 ; perimeter
G1 X103.424 Y93.927 E0.00837 ; perimeter
G1 X103.650 Y93.989 E0.01085 ; perimeter
G1 X103.792 Y94.126 E0.00913 ; perimeter
G1 X103.847 Y94.295 E0.00825 ; perimeter
G1 X103.793 Y94.540 E0.01162 ; perimeter
G1 X103.672 Y94.663 E0.00797 ; perimeter
G1 X103.533 Y94.716 E0.00690 ; perimeter
G1 X103.343 Y94.711 E0.00881 ; perimeter
G1 X103.177 Y94.647 E0.00821 ; perimeter
G1 X103.178 Y94.427 F10800.000 ; move inwards before travel
G1 X103.452 Y94.332 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333298
G1 F2400.000
G1 X103.417 Y94.323 E0.00087 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.452 Y94.332 E-0.00951 ; wipe and retract
;WIPE_END
G1 E-2.39049 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X105.572 Y94.529 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.625 Y94.347 E0.00876 ; perimeter
G1 X105.796 Y94.197 E0.01056 ; perimeter
G1 X105.924 Y94.152 E0.00626 ; perimeter
G1 X106.212 Y94.150 E0.01337 ; perimeter
G1 X106.582 Y94.242 E0.01763 ; perimeter
G1 X107.058 Y94.435 E0.02383 ; perimeter
G1 X107.562 Y94.565 E0.02409 ; perimeter
G1 X108.550 Y94.744 E0.04649 ; perimeter
G1 X108.772 Y94.821 E0.01090 ; perimeter
G1 X108.953 Y94.913 E0.00940 ; perimeter
G1 X109.092 Y95.028 E0.00837 ; perimeter
G1 X109.142 Y95.284 E0.01208 ; perimeter
G1 X109.139 Y95.415 E0.00605 ; perimeter
G1 X109.072 Y95.513 E0.00554 ; perimeter
G1 X108.934 Y95.636 E0.00854 ; perimeter
G1 X108.670 Y95.651 E0.01227 ; perimeter
G1 X108.541 Y95.630 E0.00605 ; perimeter
G1 X107.992 Y95.382 E0.02791 ; perimeter
G1 X107.953 Y95.312 E0.00371 ; perimeter
G1 X106.863 Y94.976 E0.05284 ; perimeter
G1 X106.519 Y95.032 E0.01613 ; perimeter
G1 X105.988 Y94.942 E0.02496 ; perimeter
G1 X105.825 Y94.874 E0.00817 ; perimeter
G1 X105.648 Y94.729 E0.01059 ; perimeter
G1 X105.598 Y94.660 E0.00397 ; perimeter
G1 X105.584 Y94.588 E0.00338 ; perimeter
G1 X105.742 Y94.446 F10800.000 ; move inwards before travel
G1 X106.179 Y94.564 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35517
G1 F2400.000
G1 X106.881 Y94.729 E0.01874 ; infill
G1 X106.871 Y94.676 F10800.000 ; move to first infill point
;WIDTH:0.134606
G1 F2400.000
G1 X106.971 Y94.709 E0.00080 ; infill
;WIDTH:0.160876
G1 X107.500 Y94.858 E0.00539 ; infill
;WIDTH:0.200424
G1 X107.823 Y94.937 E0.00435 ; infill
;WIDTH:0.239971
G1 X108.145 Y95.016 E0.00544 ; infill
;WIDTH:0.283057
G1 X108.880 Y95.361 E0.01620 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.145 Y95.016 E-0.21413 ; wipe and retract
;WIPE_END
G1 E-2.18587 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X111.412 Y97.179 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.516 Y97.035 E0.00821 ; perimeter
G1 X111.594 Y96.980 E0.00443 ; perimeter
G1 X111.803 Y96.968 E0.00971 ; perimeter
G1 X111.965 Y97.035 E0.00811 ; perimeter
G1 X112.114 Y97.179 E0.00959 ; perimeter
G1 X112.201 Y97.422 E0.01196 ; perimeter
G1 X112.196 Y97.637 E0.00996 ; perimeter
G1 X112.096 Y97.780 E0.00807 ; perimeter
G1 X111.949 Y97.873 E0.00806 ; perimeter
G1 X111.872 Y97.870 E0.00358 ; perimeter
G1 X111.641 Y97.800 E0.01115 ; perimeter
G1 X111.515 Y97.705 E0.00734 ; perimeter
G1 X111.453 Y97.626 E0.00462 ; perimeter
G1 X111.388 Y97.443 E0.00901 ; perimeter
G1 X111.396 Y97.237 E0.00957 ; perimeter
G1 X111.588 Y97.155 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.516 Y97.035 E-0.06185 ; wipe and retract
G1 X111.594 Y96.980 E-0.02525 ; wipe and retract
G1 X111.803 Y96.968 E-0.05533 ; wipe and retract
G1 X111.965 Y97.035 E-0.04619 ; wipe and retract
G1 X112.114 Y97.179 E-0.05466 ; wipe and retract
G1 X112.201 Y97.422 E-0.06814 ; wipe and retract
G1 X112.196 Y97.637 E-0.05673 ; wipe and retract
G1 X112.096 Y97.780 E-0.04597 ; wipe and retract
G1 X111.949 Y97.873 E-0.04590 ; wipe and retract
G1 X111.872 Y97.870 E-0.02038 ; wipe and retract
G1 X111.641 Y97.800 E-0.06354 ; wipe and retract
G1 X111.515 Y97.705 E-0.04183 ; wipe and retract
G1 X111.453 Y97.626 E-0.02634 ; wipe and retract
G1 X111.388 Y97.443 E-0.05134 ; wipe and retract
G1 X111.396 Y97.237 E-0.05453 ; wipe and retract
;WIPE_END
G1 E-1.68201 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X114.141 Y100.964 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.376 Y100.914 E0.01113 ; perimeter
G1 X114.609 Y100.994 E0.01140 ; perimeter
G1 X114.725 Y101.096 E0.00715 ; perimeter
G1 X114.849 Y101.351 E0.01315 ; perimeter
G1 X114.848 Y101.510 E0.00735 ; perimeter
G1 X114.804 Y101.631 E0.00598 ; perimeter
G1 X114.722 Y101.733 E0.00606 ; perimeter
G1 X114.594 Y101.797 E0.00661 ; perimeter
G1 X114.494 Y101.800 E0.00463 ; perimeter
G1 X114.378 Y101.772 E0.00551 ; perimeter
G1 X114.127 Y101.613 E0.01378 ; perimeter
G1 X113.998 Y101.380 E0.01230 ; perimeter
G1 X113.979 Y101.225 E0.00728 ; perimeter
G1 X114.012 Y101.091 E0.00639 ; perimeter
G1 X114.098 Y101.006 E0.00558 ; perimeter
G1 X114.343 Y101.094 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.376 Y100.914 E-0.07725 ; wipe and retract
G1 X114.609 Y100.994 E-0.06497 ; wipe and retract
G1 X114.725 Y101.096 E-0.04071 ; wipe and retract
G1 X114.849 Y101.351 E-0.07490 ; wipe and retract
G1 X114.848 Y101.510 E-0.04188 ; wipe and retract
G1 X114.804 Y101.631 E-0.03406 ; wipe and retract
G1 X114.722 Y101.733 E-0.03450 ; wipe and retract
G1 X114.594 Y101.797 E-0.03766 ; wipe and retract
G1 X114.494 Y101.800 E-0.02639 ; wipe and retract
G1 X114.378 Y101.772 E-0.03141 ; wipe and retract
G1 X114.127 Y101.613 E-0.07848 ; wipe and retract
G1 X113.998 Y101.380 E-0.07008 ; wipe and retract
G1 X113.979 Y101.225 E-0.04146 ; wipe and retract
G1 X114.012 Y101.091 E-0.03641 ; wipe and retract
G1 X114.098 Y101.006 E-0.03177 ; wipe and retract
;WIPE_END
G1 E-1.67807 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X115.677 Y106.448 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.539 Y106.492 E0.00671 ; perimeter
G1 X115.401 Y106.479 E0.00643 ; perimeter
G1 X115.318 Y106.439 E0.00426 ; perimeter
G1 X115.215 Y106.304 E0.00787 ; perimeter
G1 X115.155 Y106.095 E0.01009 ; perimeter
G1 X115.158 Y105.923 E0.00795 ; perimeter
G1 X115.212 Y105.774 E0.00734 ; perimeter
G1 X115.282 Y105.684 E0.00532 ; perimeter
G1 X115.461 Y105.600 E0.00913 ; perimeter
G1 X115.522 Y105.601 E0.00282 ; perimeter
G1 X115.706 Y105.657 E0.00894 ; perimeter
G1 X115.773 Y105.708 E0.00390 ; perimeter
G1 X115.832 Y105.810 E0.00544 ; perimeter
G1 X115.869 Y106.065 E0.01194 ; perimeter
G1 X115.787 Y106.348 E0.01362 ; perimeter
G1 X115.721 Y106.408 E0.00413 ; perimeter
G1 X115.548 Y106.382 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.539 Y106.492 E-0.05303 ; wipe and retract
G1 X115.401 Y106.479 E-0.03661 ; wipe and retract
G1 X115.318 Y106.439 E-0.02426 ; wipe and retract
G1 X115.215 Y106.304 E-0.04483 ; wipe and retract
G1 X115.155 Y106.095 E-0.05747 ; wipe and retract
G1 X115.158 Y105.923 E-0.04529 ; wipe and retract
G1 X115.212 Y105.774 E-0.04181 ; wipe and retract
G1 X115.282 Y105.684 E-0.03029 ; wipe and retract
G1 X115.461 Y105.600 E-0.05203 ; wipe and retract
G1 X115.522 Y105.601 E-0.01609 ; wipe and retract
G1 X115.706 Y105.657 E-0.05091 ; wipe and retract
G1 X115.773 Y105.708 E-0.02222 ; wipe and retract
G1 X115.832 Y105.810 E-0.03102 ; wipe and retract
G1 X115.869 Y106.065 E-0.06802 ; wipe and retract
G1 X115.787 Y106.348 E-0.07762 ; wipe and retract
G1 X115.721 Y106.408 E-0.02353 ; wipe and retract
;WIPE_END
G1 E-1.72497 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X115.569 Y110.815 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.663 Y110.837 E0.00448 ; perimeter
G1 X115.815 Y110.954 E0.00888 ; perimeter
G1 X115.869 Y111.044 E0.00488 ; perimeter
G1 X115.899 Y111.206 E0.00764 ; perimeter
G1 X115.853 Y111.446 E0.01129 ; perimeter
G1 X115.818 Y111.514 E0.00355 ; perimeter
G1 X115.726 Y111.596 E0.00570 ; perimeter
G1 X115.545 Y111.656 E0.00883 ; perimeter
G1 X115.371 Y111.632 E0.00814 ; perimeter
G1 X115.282 Y111.581 E0.00478 ; perimeter
G1 X115.144 Y111.367 E0.01175 ; perimeter
G1 X115.123 Y111.250 E0.00550 ; perimeter
G1 X115.142 Y111.093 E0.00735 ; perimeter
G1 X115.248 Y110.904 E0.01002 ; perimeter
G1 X115.407 Y110.822 E0.00826 ; perimeter
G1 X115.509 Y110.818 E0.00474 ; perimeter
G1 X115.612 Y110.902 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.663 Y110.837 E-0.04100 ; wipe and retract
G1 X115.815 Y110.954 E-0.05060 ; wipe and retract
G1 X115.869 Y111.044 E-0.02779 ; wipe and retract
G1 X115.899 Y111.206 E-0.04352 ; wipe and retract
G1 X115.853 Y111.446 E-0.06430 ; wipe and retract
G1 X115.818 Y111.514 E-0.02025 ; wipe and retract
G1 X115.726 Y111.596 E-0.03246 ; wipe and retract
G1 X115.545 Y111.656 E-0.05032 ; wipe and retract
G1 X115.371 Y111.632 E-0.04639 ; wipe and retract
G1 X115.282 Y111.581 E-0.02725 ; wipe and retract
G1 X115.144 Y111.367 E-0.06693 ; wipe and retract
G1 X115.123 Y111.250 E-0.03135 ; wipe and retract
G1 X115.142 Y111.093 E-0.04186 ; wipe and retract
G1 X115.248 Y110.904 E-0.05711 ; wipe and retract
G1 X115.407 Y110.822 E-0.04705 ; wipe and retract
G1 X115.509 Y110.818 E-0.02700 ; wipe and retract
;WIPE_END
G1 E-1.72481 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X114.434 Y115.257 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.718 Y115.059 E0.01605 ; perimeter
G1 X115.124 Y114.638 E0.02710 ; perimeter
G1 X115.216 Y114.589 E0.00480 ; perimeter
G1 X115.342 Y114.554 E0.00607 ; perimeter
G1 X115.508 Y114.571 E0.00773 ; perimeter
G1 X115.678 Y114.676 E0.00926 ; perimeter
G1 X115.754 Y114.778 E0.00587 ; perimeter
G1 X115.792 Y114.955 E0.00840 ; perimeter
G1 X115.747 Y115.148 E0.00916 ; perimeter
G1 X115.414 Y115.605 E0.02621 ; perimeter
G1 X115.222 Y115.795 E0.01253 ; perimeter
G1 X115.133 Y115.837 E0.00454 ; perimeter
G1 X115.041 Y115.854 E0.00430 ; perimeter
G1 X114.913 Y115.830 E0.00607 ; perimeter
G1 X114.794 Y115.837 E0.00550 ; perimeter
G1 X114.426 Y115.746 E0.01757 ; perimeter
G1 X114.197 Y115.746 E0.01062 ; perimeter
G1 X113.678 Y115.915 E0.02524 ; perimeter
G1 X113.536 Y115.927 E0.00663 ; perimeter
G1 X113.356 Y115.869 E0.00873 ; perimeter
G1 X113.246 Y115.789 E0.00632 ; perimeter
G1 X113.146 Y115.620 E0.00909 ; perimeter
G1 X113.123 Y115.469 E0.00706 ; perimeter
G1 X113.175 Y115.301 E0.00818 ; perimeter
G1 X113.331 Y115.153 E0.00998 ; perimeter
G1 X113.398 Y115.127 E0.00333 ; perimeter
G1 X113.498 Y115.108 E0.00470 ; perimeter
G1 X113.669 Y115.124 E0.00797 ; perimeter
G1 X113.838 Y115.192 E0.00841 ; perimeter
G1 X114.054 Y115.225 E0.01014 ; perimeter
G1 X114.244 Y115.285 E0.00923 ; perimeter
G1 X114.374 Y115.266 E0.00610 ; perimeter
G1 X114.705 Y115.472 F10800.000 ; move inwards before travel
G1 X114.537 Y115.525 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.409959
G1 F2400.000
G1 X114.998 Y115.399 E0.01458 ; infill
G1 X115.368 Y114.974 E0.01719 ; infill
;WIDTH:0.378429
G1 X115.376 Y114.963 E0.00037 ; infill
;WIDTH:0.368141
G1 X115.400 Y114.946 E0.00080 ; infill
;WIDTH:0.329046
G1 X115.401 Y114.946 E0.00002 ; infill
G1 X114.089 Y115.520 F10800.000 ; move to first infill point
;WIDTH:0.262994
G1 F2400.000
G1 X113.377 Y115.537 E0.01302 ; infill
G1 X112.075 Y114.355 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.992 Y114.403 E0.00444 ; perimeter
G1 X111.593 Y114.369 E0.01857 ; perimeter
G1 X111.401 Y114.272 E0.00996 ; perimeter
G1 X111.220 Y114.120 E0.01093 ; perimeter
G1 X111.131 Y113.978 E0.00778 ; perimeter
G1 X111.069 Y113.767 E0.01017 ; perimeter
G1 X111.083 Y113.639 E0.00600 ; perimeter
G1 X111.133 Y113.482 E0.00762 ; perimeter
G1 X111.215 Y113.418 E0.00485 ; perimeter
G1 X111.318 Y113.382 E0.00505 ; perimeter
G1 X111.425 Y113.312 E0.00590 ; perimeter
G1 X111.636 Y113.313 E0.00979 ; perimeter
G1 X111.849 Y113.473 E0.01237 ; perimeter
G1 X112.103 Y113.869 E0.02180 ; perimeter
G1 X112.149 Y113.982 E0.00563 ; perimeter
G1 X112.170 Y114.188 E0.00961 ; perimeter
G1 X112.147 Y114.266 E0.00377 ; perimeter
G1 X112.113 Y114.308 E0.00250 ; perimeter
G1 X111.985 Y114.323 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.992 Y114.403 E-0.04048 ; wipe and retract
G1 X111.593 Y114.369 E-0.10577 ; wipe and retract
G1 X111.401 Y114.272 E-0.05676 ; wipe and retract
G1 X111.220 Y114.120 E-0.06225 ; wipe and retract
G1 X111.131 Y113.978 E-0.04433 ; wipe and retract
G1 X111.069 Y113.767 E-0.05793 ; wipe and retract
G1 X111.083 Y113.639 E-0.03419 ; wipe and retract
G1 X111.133 Y113.482 E-0.04339 ; wipe and retract
G1 X111.215 Y113.418 E-0.02762 ; wipe and retract
G1 X111.318 Y113.382 E-0.02877 ; wipe and retract
G1 X111.425 Y113.312 E-0.03359 ; wipe and retract
G1 X111.636 Y113.313 E-0.05579 ; wipe and retract
G1 X111.849 Y113.473 E-0.07048 ; wipe and retract
G1 X112.103 Y113.869 E-0.12416 ; wipe and retract
G1 X112.149 Y113.982 E-0.03206 ; wipe and retract
G1 X112.170 Y114.188 E-0.05473 ; wipe and retract
G1 X112.147 Y114.266 E-0.02148 ; wipe and retract
G1 X112.113 Y114.308 E-0.01425 ; wipe and retract
;WIPE_END
G1 E-1.49197 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X109.228 Y111.236 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.093 Y111.278 E0.00658 ; perimeter
G1 X108.896 Y111.286 E0.00910 ; perimeter
G1 X108.684 Y111.214 E0.01036 ; perimeter
G1 X108.540 Y111.126 E0.00782 ; perimeter
G1 X108.400 Y110.906 E0.01208 ; perimeter
G1 X108.378 Y110.787 E0.00560 ; perimeter
G1 X108.436 Y110.602 E0.00898 ; perimeter
G1 X108.518 Y110.523 E0.00529 ; perimeter
G1 X108.712 Y110.442 E0.00975 ; perimeter
G1 X108.912 Y110.451 E0.00926 ; perimeter
G1 X109.115 Y110.528 E0.01005 ; perimeter
G1 X109.246 Y110.625 E0.00759 ; perimeter
G1 X109.306 Y110.702 E0.00450 ; perimeter
G1 X109.369 Y110.860 E0.00788 ; perimeter
G1 X109.371 Y110.989 E0.00598 ; perimeter
G1 X109.309 Y111.160 E0.00839 ; perimeter
G1 X109.272 Y111.195 E0.00236 ; perimeter
G1 X109.103 Y111.168 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.093 Y111.278 E-0.05220 ; wipe and retract
G1 X108.896 Y111.286 E-0.05187 ; wipe and retract
G1 X108.684 Y111.214 E-0.05904 ; wipe and retract
G1 X108.540 Y111.126 E-0.04457 ; wipe and retract
G1 X108.400 Y110.906 E-0.06883 ; wipe and retract
G1 X108.378 Y110.787 E-0.03189 ; wipe and retract
G1 X108.436 Y110.602 E-0.05113 ; wipe and retract
G1 X108.518 Y110.523 E-0.03012 ; wipe and retract
G1 X108.712 Y110.442 E-0.05557 ; wipe and retract
G1 X108.912 Y110.451 E-0.05273 ; wipe and retract
G1 X109.115 Y110.528 E-0.05724 ; wipe and retract
G1 X109.246 Y110.625 E-0.04324 ; wipe and retract
G1 X109.306 Y110.702 E-0.02563 ; wipe and retract
G1 X109.369 Y110.860 E-0.04491 ; wipe and retract
G1 X109.371 Y110.989 E-0.03408 ; wipe and retract
G1 X109.309 Y111.160 E-0.04779 ; wipe and retract
G1 X109.272 Y111.195 E-0.01346 ; wipe and retract
;WIPE_END
G1 E-1.63568 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X103.491 Y107.770 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.638 Y107.680 E0.00795 ; perimeter
G1 X103.915 Y107.642 E0.01294 ; perimeter
G1 X104.127 Y107.702 E0.01025 ; perimeter
G1 X104.531 Y107.986 E0.02284 ; perimeter
G1 X104.610 Y108.103 E0.00655 ; perimeter
G1 X104.620 Y108.250 E0.00682 ; perimeter
G1 X104.644 Y108.327 E0.00374 ; perimeter
G1 X104.606 Y108.442 E0.00564 ; perimeter
G1 X104.494 Y108.534 E0.00672 ; perimeter
G1 X104.321 Y108.545 E0.00805 ; perimeter
G1 X104.239 Y108.579 E0.00410 ; perimeter
G1 X103.893 Y108.549 E0.01607 ; perimeter
G1 X103.561 Y108.351 E0.01792 ; perimeter
G1 X103.448 Y108.209 E0.00841 ; perimeter
G1 X103.420 Y108.090 E0.00566 ; perimeter
G1 X103.478 Y107.828 E0.01245 ; perimeter
G1 X103.660 Y107.802 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.638 Y107.680 E-0.05740 ; wipe and retract
G1 X103.915 Y107.642 E-0.07374 ; wipe and retract
G1 X104.127 Y107.702 E-0.05839 ; wipe and retract
G1 X104.531 Y107.986 E-0.13011 ; wipe and retract
G1 X104.610 Y108.103 E-0.03732 ; wipe and retract
G1 X104.620 Y108.250 E-0.03888 ; wipe and retract
G1 X104.644 Y108.327 E-0.02132 ; wipe and retract
G1 X104.606 Y108.442 E-0.03214 ; wipe and retract
G1 X104.494 Y108.534 E-0.03827 ; wipe and retract
G1 X104.321 Y108.545 E-0.04584 ; wipe and retract
G1 X104.239 Y108.579 E-0.02336 ; wipe and retract
G1 X103.893 Y108.549 E-0.09154 ; wipe and retract
G1 X103.561 Y108.351 E-0.10210 ; wipe and retract
G1 X103.448 Y108.209 E-0.04788 ; wipe and retract
G1 X103.420 Y108.090 E-0.03224 ; wipe and retract
G1 X103.478 Y107.828 E-0.07094 ; wipe and retract
;WIPE_END
G1 E-1.49851 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X101.399 Y105.605 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.357 Y105.692 E0.00447 ; perimeter
G1 X101.211 Y105.835 E0.00944 ; perimeter
G1 X101.128 Y105.847 E0.00387 ; perimeter
G1 X100.920 Y105.788 E0.01003 ; perimeter
G1 X100.775 Y105.682 E0.00832 ; perimeter
G1 X100.629 Y105.483 E0.01142 ; perimeter
G1 X100.565 Y105.295 E0.00924 ; perimeter
G1 X100.516 Y105.053 E0.01143 ; perimeter
G1 X100.565 Y104.751 E0.01416 ; perimeter
G1 X100.682 Y104.562 E0.01029 ; perimeter
G1 X100.868 Y104.520 E0.00882 ; perimeter
G1 X101.089 Y104.728 E0.01406 ; perimeter
G1 X101.150 Y104.763 E0.00325 ; perimeter
G1 X101.263 Y104.914 E0.00873 ; perimeter
G1 X101.365 Y105.121 E0.01071 ; perimeter
G1 X101.432 Y105.424 E0.01438 ; perimeter
G1 X101.409 Y105.546 E0.00576 ; perimeter
G1 X101.305 Y105.629 F10800.000 ; move inwards before travel
G1 X101.162 Y105.541 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.200943
G1 F2400.000
G1 X101.092 Y105.504 E0.00105 ; infill
;WIDTH:0.249477
G1 X101.073 Y105.473 E0.00062 ; infill
;WIDTH:0.298233
G1 X101.056 Y105.431 E0.00097 ; infill
;WIDTH:0.314117
G1 X100.770 Y104.994 E0.01177 ; infill
G1 X101.183 Y105.445 F10800.000 ; move to first infill point
;WIDTH:0.308801
G1 F2400.000
G1 X100.883 Y105.021 E0.01149 ; infill
;WIDTH:0.27529
G1 X100.800 Y104.811 E0.00436 ; infill
G1 X100.803 Y104.792 F10800.000 ; move to first infill point
;WIDTH:0.373898
G1 F2400.000
G1 X100.975 Y105.237 E0.01312 ; infill
G1 X101.070 Y105.580 E0.00980 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.975 Y105.237 E-0.09400 ; wipe and retract
G1 X100.803 Y104.792 E-0.12576 ; wipe and retract
;WIPE_END
G1 E-2.18024 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 X100.076 Y102.192 ; move to first perimeter point
G1 Z20.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.877 Y102.201 E0.00921 ; perimeter
G1 X99.683 Y102.113 E0.00989 ; perimeter
G1 X99.548 Y101.882 E0.01238 ; perimeter
G1 X99.532 Y101.733 E0.00694 ; perimeter
G1 X99.548 Y101.663 E0.00335 ; perimeter
G1 X99.672 Y101.473 E0.01050 ; perimeter
G1 X99.779 Y101.412 E0.00570 ; perimeter
G1 X100.055 Y101.391 E0.01282 ; perimeter
G1 X100.264 Y101.507 E0.01107 ; perimeter
G1 X100.361 Y101.650 E0.00798 ; perimeter
G1 X100.384 Y101.801 E0.00707 ; perimeter
G1 X100.360 Y101.983 E0.00852 ; perimeter
G1 X100.290 Y102.074 E0.00535 ; perimeter
G1 X100.130 Y102.167 E0.00856 ; perimeter
G1 X99.938 Y102.049 F10800.000 ; move inwards before travel
G1 X99.959 Y101.798 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.354559
G1 F2400.000
G1 X99.992 Y101.799 E0.00086 ; infill
;LAYER_CHANGE
;Z:20.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;20.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.959 Y101.798 E-0.00877 ; wipe and retract
;WIPE_END
G1 E-2.39123 F2400.000 ; retract
G1 Z20.475 F10800.000 ; lift Z
G1 Z20.600 ; move to next layer (102)
;AFTER_LAYER_CHANGE
;20.6
G1 X99.769 Y102.155 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.698 Y102.088 E0.00452 ; perimeter
G1 X99.599 Y101.903 E0.00969 ; perimeter
G1 X99.577 Y101.737 E0.00776 ; perimeter
G1 X99.595 Y101.624 E0.00532 ; perimeter
G1 X99.674 Y101.510 E0.00640 ; perimeter
G1 X99.772 Y101.456 E0.00522 ; perimeter
G1 X99.868 Y101.372 E0.00589 ; perimeter
G1 X100.148 Y101.362 E0.01300 ; perimeter
G1 X100.302 Y101.456 E0.00834 ; perimeter
G1 X100.407 Y101.639 E0.00981 ; perimeter
G1 X100.435 Y101.825 E0.00869 ; perimeter
G1 X100.412 Y102.002 E0.00830 ; perimeter
G1 X100.332 Y102.154 E0.00795 ; perimeter
G1 X100.239 Y102.211 E0.00507 ; perimeter
G1 X100.122 Y102.236 E0.00553 ; perimeter
G1 X99.943 Y102.227 E0.00832 ; perimeter
G1 X99.824 Y102.178 E0.00594 ; perimeter
G1 X99.775 Y102.058 F10800.000 ; move inwards before travel
G1 X100.012 Y101.795 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.359826
G1 F2400.000
G1 X100.050 Y101.854 E0.00186 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.012 Y101.795 E-0.01863 ; wipe and retract
;WIPE_END
G1 E-2.38137 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X101.181 Y105.681 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.061 Y105.698 E0.00562 ; perimeter
G1 X100.857 Y105.647 E0.00974 ; perimeter
G1 X100.746 Y105.577 E0.00612 ; perimeter
G1 X100.582 Y105.355 E0.01278 ; perimeter
G1 X100.516 Y105.157 E0.00964 ; perimeter
G1 X100.456 Y104.845 E0.01475 ; perimeter
G1 X100.467 Y104.674 E0.00795 ; perimeter
G1 X100.512 Y104.487 E0.00887 ; perimeter
G1 X100.630 Y104.319 E0.00952 ; perimeter
G1 X100.757 Y104.268 E0.00633 ; perimeter
G1 X100.810 Y104.279 E0.00254 ; perimeter
G1 X101.054 Y104.483 E0.01468 ; perimeter
G1 X101.242 Y104.757 E0.01541 ; perimeter
G1 X101.352 Y105.050 E0.01450 ; perimeter
G1 X101.392 Y105.277 E0.01067 ; perimeter
G1 X101.365 Y105.441 E0.00770 ; perimeter
G1 X101.271 Y105.606 E0.00879 ; perimeter
G1 X101.227 Y105.642 E0.00264 ; perimeter
G1 X101.084 Y105.608 F10800.000 ; move inwards before travel
G1 X101.072 Y105.450 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.375228
G1 F2400.000
G1 X100.948 Y105.165 E0.00859 ; infill
G1 X100.776 Y104.565 E0.01725 ; infill
G1 X100.777 Y104.565 F10800.000 ; move to first infill point
;WIDTH:0.243907
G1 F2400.000
G1 X100.932 Y105.409 E0.01434 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.777 Y104.565 E-0.22637 ; wipe and retract
;WIPE_END
G1 E-2.17363 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X103.507 Y107.738 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.723 Y107.587 E0.01219 ; perimeter
G1 X103.893 Y107.574 E0.00789 ; perimeter
G1 X104.150 Y107.659 E0.01255 ; perimeter
G1 X104.513 Y107.889 E0.01990 ; perimeter
G1 X104.718 Y108.057 E0.01229 ; perimeter
G1 X104.800 Y108.163 E0.00621 ; perimeter
G1 X104.890 Y108.437 E0.01335 ; perimeter
G1 X104.885 Y108.467 E0.00140 ; perimeter
G1 X104.678 Y108.620 E0.01192 ; perimeter
G1 X104.476 Y108.638 E0.00941 ; perimeter
G1 X104.071 Y108.606 E0.01881 ; perimeter
G1 X103.828 Y108.475 E0.01276 ; perimeter
G1 X103.586 Y108.305 E0.01374 ; perimeter
G1 X103.496 Y108.174 E0.00735 ; perimeter
G1 X103.457 Y107.980 E0.00914 ; perimeter
G1 X103.495 Y107.797 E0.00870 ; perimeter
G1 X103.768 Y107.771 F10800.000 ; move inwards before travel
G1 X103.830 Y107.821 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.274811
G1 F2400.000
G1 X103.838 Y107.891 E0.00136 ; infill
;WIDTH:0.314816
G1 X103.846 Y107.961 E0.00160 ; infill
;WIDTH:0.344119
G1 X103.857 Y107.981 E0.00057 ; infill
;WIDTH:0.388213
G1 X103.902 Y108.022 E0.00173 ; infill
;WIDTH:0.422268
G1 X104.537 Y108.390 E0.02317 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.902 Y108.022 E-0.19388 ; wipe and retract
;WIPE_END
G1 E-2.20612 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X108.554 Y110.639 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.632 Y110.564 E0.00500 ; perimeter
G1 X108.823 Y110.486 E0.00959 ; perimeter
G1 X109.027 Y110.501 E0.00946 ; perimeter
G1 X109.221 Y110.578 E0.00964 ; perimeter
G1 X109.353 Y110.674 E0.00757 ; perimeter
G1 X109.412 Y110.750 E0.00444 ; perimeter
G1 X109.474 Y110.912 E0.00805 ; perimeter
G1 X109.472 Y111.065 E0.00713 ; perimeter
G1 X109.421 Y111.204 E0.00682 ; perimeter
G1 X109.342 Y111.283 E0.00518 ; perimeter
G1 X109.184 Y111.330 E0.00760 ; perimeter
G1 X108.974 Y111.328 E0.00975 ; perimeter
G1 X108.752 Y111.242 E0.01104 ; perimeter
G1 X108.669 Y111.192 E0.00448 ; perimeter
G1 X108.581 Y111.095 E0.00610 ; perimeter
G1 X108.503 Y110.942 E0.00796 ; perimeter
G1 X108.490 Y110.832 E0.00509 ; perimeter
G1 X108.535 Y110.696 E0.00665 ; perimeter
G1 X108.662 Y110.647 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.632 Y110.564 E-0.04315 ; wipe and retract
G1 X108.823 Y110.486 E-0.05462 ; wipe and retract
G1 X109.027 Y110.501 E-0.05389 ; wipe and retract
G1 X109.221 Y110.578 E-0.05491 ; wipe and retract
G1 X109.353 Y110.674 E-0.04315 ; wipe and retract
G1 X109.412 Y110.750 E-0.02527 ; wipe and retract
G1 X109.474 Y110.912 E-0.04584 ; wipe and retract
G1 X109.472 Y111.065 E-0.04060 ; wipe and retract
G1 X109.421 Y111.204 E-0.03887 ; wipe and retract
G1 X109.342 Y111.283 E-0.02950 ; wipe and retract
G1 X109.184 Y111.330 E-0.04332 ; wipe and retract
G1 X108.974 Y111.328 E-0.05556 ; wipe and retract
G1 X108.752 Y111.242 E-0.06287 ; wipe and retract
G1 X108.669 Y111.192 E-0.02550 ; wipe and retract
G1 X108.581 Y111.095 E-0.03474 ; wipe and retract
G1 X108.503 Y110.942 E-0.04534 ; wipe and retract
G1 X108.490 Y110.832 E-0.02901 ; wipe and retract
G1 X108.535 Y110.696 E-0.03788 ; wipe and retract
;WIPE_END
G1 E-1.63598 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X111.320 Y113.345 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.510 Y113.275 E0.00938 ; perimeter
G1 X111.682 Y113.274 E0.00797 ; perimeter
G1 X111.894 Y113.431 E0.01222 ; perimeter
G1 X112.219 Y113.918 E0.02714 ; perimeter
G1 X112.298 Y114.104 E0.00936 ; perimeter
G1 X112.312 Y114.230 E0.00584 ; perimeter
G1 X112.290 Y114.371 E0.00661 ; perimeter
G1 X112.246 Y114.458 E0.00453 ; perimeter
G1 X112.156 Y114.508 E0.00474 ; perimeter
G1 X111.770 Y114.475 E0.01795 ; perimeter
G1 X111.481 Y114.323 E0.01516 ; perimeter
G1 X111.369 Y114.228 E0.00677 ; perimeter
G1 X111.216 Y114.029 E0.01166 ; perimeter
G1 X111.119 Y113.747 E0.01383 ; perimeter
G1 X111.191 Y113.480 E0.01276 ; perimeter
G1 X111.279 Y113.389 E0.00587 ; perimeter
G1 X111.503 Y113.432 F10800.000 ; move inwards before travel
G1 X112.029 Y114.262 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.326377
G1 F2400.000
G1 X111.415 Y113.595 E0.02137 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.029 Y114.262 E-0.23928 ; wipe and retract
;WIPE_END
G1 E-2.16072 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X113.160 Y115.242 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.290 Y115.120 E0.00824 ; perimeter
G1 X113.529 Y115.067 E0.01135 ; perimeter
G1 X113.588 Y115.070 E0.00275 ; perimeter
G1 X114.237 Y115.285 E0.03166 ; perimeter
G1 X114.451 Y115.254 E0.01003 ; perimeter
G1 X114.681 Y115.093 E0.01298 ; perimeter
G1 X115.117 Y114.646 E0.02896 ; perimeter
G1 X115.325 Y114.563 E0.01035 ; perimeter
G1 X115.510 Y114.582 E0.00864 ; perimeter
G1 X115.605 Y114.628 E0.00487 ; perimeter
G1 X115.692 Y114.700 E0.00523 ; perimeter
G1 X115.762 Y114.814 E0.00622 ; perimeter
G1 X115.788 Y114.979 E0.00771 ; perimeter
G1 X115.743 Y115.155 E0.00840 ; perimeter
G1 X115.453 Y115.560 E0.02309 ; perimeter
G1 X115.244 Y115.769 E0.01369 ; perimeter
G1 X115.146 Y115.814 E0.00500 ; perimeter
G1 X115.043 Y115.832 E0.00486 ; perimeter
G1 X114.193 Y115.691 E0.03991 ; perimeter
G1 X113.640 Y115.881 E0.02710 ; perimeter
G1 X113.511 Y115.887 E0.00598 ; perimeter
G1 X113.335 Y115.834 E0.00848 ; perimeter
G1 X113.188 Y115.706 E0.00905 ; perimeter
G1 X113.127 Y115.582 E0.00639 ; perimeter
G1 X113.095 Y115.411 E0.00807 ; perimeter
G1 X113.137 Y115.298 E0.00562 ; perimeter
G1 X113.338 Y115.251 F10800.000 ; move inwards before travel
G1 X114.566 Y115.508 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.388722
G1 F2400.000
G1 X114.962 Y115.399 E0.01180 ; infill
;WIDTH:0.409816
G1 X115.011 Y115.383 E0.00159 ; infill
G1 X115.117 Y115.275 E0.00461 ; infill
G1 X115.364 Y114.980 E0.01173 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.117 Y115.275 E-0.10142 ; wipe and retract
G1 X115.011 Y115.383 E-0.03985 ; wipe and retract
G1 X114.962 Y115.399 E-0.01374 ; wipe and retract
;WIPE_END
G1 E-2.24499 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X115.870 Y110.997 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.897 Y111.149 E0.00713 ; perimeter
G1 X115.822 Y111.458 E0.01476 ; perimeter
G1 X115.727 Y111.543 E0.00588 ; perimeter
G1 X115.523 Y111.609 E0.00995 ; perimeter
G1 X115.356 Y111.574 E0.00787 ; perimeter
G1 X115.291 Y111.537 E0.00348 ; perimeter
G1 X115.150 Y111.331 E0.01156 ; perimeter
G1 X115.123 Y111.195 E0.00642 ; perimeter
G1 X115.144 Y111.035 E0.00750 ; perimeter
G1 X115.253 Y110.850 E0.00994 ; perimeter
G1 X115.389 Y110.778 E0.00713 ; perimeter
G1 X115.605 Y110.777 E0.01001 ; perimeter
G1 X115.674 Y110.792 E0.00328 ; perimeter
G1 X115.801 Y110.888 E0.00735 ; perimeter
G1 X115.838 Y110.946 E0.00322 ; perimeter
G1 X115.774 Y111.118 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.897 Y111.149 E-0.05564 ; wipe and retract
G1 X115.822 Y111.458 E-0.08410 ; wipe and retract
G1 X115.727 Y111.543 E-0.03348 ; wipe and retract
G1 X115.523 Y111.609 E-0.05666 ; wipe and retract
G1 X115.356 Y111.574 E-0.04485 ; wipe and retract
G1 X115.291 Y111.537 E-0.01984 ; wipe and retract
G1 X115.150 Y111.331 E-0.06586 ; wipe and retract
G1 X115.123 Y111.195 E-0.03656 ; wipe and retract
G1 X115.144 Y111.035 E-0.04275 ; wipe and retract
G1 X115.253 Y110.850 E-0.05662 ; wipe and retract
G1 X115.389 Y110.778 E-0.04060 ; wipe and retract
G1 X115.605 Y110.777 E-0.05704 ; wipe and retract
G1 X115.674 Y110.792 E-0.01866 ; wipe and retract
G1 X115.801 Y110.888 E-0.04187 ; wipe and retract
G1 X115.838 Y110.946 E-0.01836 ; wipe and retract
;WIPE_END
G1 E-1.72710 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X115.547 Y106.562 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.350 Y106.528 E0.00928 ; perimeter
G1 X115.260 Y106.461 E0.00520 ; perimeter
G1 X115.176 Y106.294 E0.00865 ; perimeter
G1 X115.158 Y105.994 E0.01393 ; perimeter
G1 X115.221 Y105.828 E0.00822 ; perimeter
G1 X115.294 Y105.739 E0.00533 ; perimeter
G1 X115.433 Y105.678 E0.00707 ; perimeter
G1 X115.513 Y105.673 E0.00369 ; perimeter
G1 X115.700 Y105.724 E0.00899 ; perimeter
G1 X115.768 Y105.772 E0.00383 ; perimeter
G1 X115.827 Y105.871 E0.00535 ; perimeter
G1 X115.869 Y106.129 E0.01211 ; perimeter
G1 X115.806 Y106.384 E0.01218 ; perimeter
G1 X115.665 Y106.523 E0.00915 ; perimeter
G1 X115.604 Y106.543 E0.00296 ; perimeter
G1 X115.432 Y106.398 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.350 Y106.528 E-0.06729 ; wipe and retract
G1 X115.260 Y106.461 E-0.02960 ; wipe and retract
G1 X115.176 Y106.294 E-0.04927 ; wipe and retract
G1 X115.158 Y105.994 E-0.07935 ; wipe and retract
G1 X115.221 Y105.828 E-0.04683 ; wipe and retract
G1 X115.294 Y105.739 E-0.03039 ; wipe and retract
G1 X115.433 Y105.678 E-0.04026 ; wipe and retract
G1 X115.513 Y105.673 E-0.02103 ; wipe and retract
G1 X115.700 Y105.724 E-0.05120 ; wipe and retract
G1 X115.768 Y105.772 E-0.02184 ; wipe and retract
G1 X115.827 Y105.871 E-0.03049 ; wipe and retract
G1 X115.869 Y106.129 E-0.06901 ; wipe and retract
G1 X115.806 Y106.384 E-0.06940 ; wipe and retract
G1 X115.665 Y106.523 E-0.05213 ; wipe and retract
G1 X115.604 Y106.543 E-0.01689 ; wipe and retract
;WIPE_END
G1 E-1.72501 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X113.954 Y101.038 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.068 Y100.892 E0.00858 ; perimeter
G1 X114.264 Y100.843 E0.00937 ; perimeter
G1 X114.383 Y100.854 E0.00554 ; perimeter
G1 X114.549 Y100.924 E0.00832 ; perimeter
G1 X114.690 Y101.055 E0.00894 ; perimeter
G1 X114.793 Y101.274 E0.01119 ; perimeter
G1 X114.792 Y101.390 E0.00538 ; perimeter
G1 X114.717 Y101.588 E0.00978 ; perimeter
G1 X114.649 Y101.665 E0.00479 ; perimeter
G1 X114.546 Y101.699 E0.00500 ; perimeter
G1 X114.310 Y101.684 E0.01098 ; perimeter
G1 X114.065 Y101.540 E0.01317 ; perimeter
G1 X113.933 Y101.309 E0.01232 ; perimeter
G1 X113.917 Y101.168 E0.00656 ; perimeter
G1 X113.937 Y101.095 E0.00351 ; perimeter
G1 X114.139 Y101.027 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.068 Y100.892 E-0.06383 ; wipe and retract
G1 X114.264 Y100.843 E-0.05337 ; wipe and retract
G1 X114.383 Y100.854 E-0.03155 ; wipe and retract
G1 X114.549 Y100.924 E-0.04737 ; wipe and retract
G1 X114.690 Y101.055 E-0.05092 ; wipe and retract
G1 X114.793 Y101.274 E-0.06373 ; wipe and retract
G1 X114.792 Y101.390 E-0.03062 ; wipe and retract
G1 X114.717 Y101.588 E-0.05571 ; wipe and retract
G1 X114.649 Y101.665 E-0.02728 ; wipe and retract
G1 X114.546 Y101.699 E-0.02849 ; wipe and retract
G1 X114.310 Y101.684 E-0.06255 ; wipe and retract
G1 X114.065 Y101.540 E-0.07500 ; wipe and retract
G1 X113.933 Y101.309 E-0.07019 ; wipe and retract
G1 X113.917 Y101.168 E-0.03740 ; wipe and retract
G1 X113.937 Y101.095 E-0.01998 ; wipe and retract
;WIPE_END
G1 E-1.68200 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X112.049 Y97.697 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.893 Y97.782 E0.00821 ; perimeter
G1 X111.689 Y97.762 E0.00950 ; perimeter
G1 X111.587 Y97.722 E0.00506 ; perimeter
G1 X111.504 Y97.661 E0.00477 ; perimeter
G1 X111.392 Y97.517 E0.00847 ; perimeter
G1 X111.339 Y97.345 E0.00831 ; perimeter
G1 X111.339 Y97.211 E0.00621 ; perimeter
G1 X111.420 Y97.023 E0.00948 ; perimeter
G1 X111.549 Y96.920 E0.00765 ; perimeter
G1 X111.648 Y96.897 E0.00471 ; perimeter
G1 X111.790 Y96.906 E0.00661 ; perimeter
G1 X111.908 Y96.952 E0.00586 ; perimeter
G1 X112.067 Y97.099 E0.01005 ; perimeter
G1 X112.156 Y97.343 E0.01202 ; perimeter
G1 X112.136 Y97.577 E0.01091 ; perimeter
G1 X112.084 Y97.648 E0.00407 ; perimeter
G1 X111.878 Y97.647 F10800.000 ; move inwards before travel
G1 X111.716 Y97.287 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.259831
G1 F2400.000
G1 X111.807 Y97.440 E0.00321 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.716 Y97.287 E-0.04693 ; wipe and retract
;WIPE_END
G1 E-2.35307 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X109.142 Y95.517 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.028 Y95.591 E0.00628 ; perimeter
G1 X108.769 Y95.630 E0.01214 ; perimeter
G1 X108.430 Y95.560 E0.01605 ; perimeter
G1 X107.836 Y95.308 E0.02986 ; perimeter
G1 X106.002 Y94.927 E0.08680 ; perimeter
G1 X105.770 Y94.706 E0.01484 ; perimeter
G1 X105.730 Y94.499 E0.00980 ; perimeter
G1 X105.784 Y94.349 E0.00737 ; perimeter
G1 X105.986 Y94.203 E0.01154 ; perimeter
G1 X106.103 Y94.172 E0.00561 ; perimeter
G1 X106.246 Y94.166 E0.00661 ; perimeter
G1 X106.405 Y94.185 E0.00743 ; perimeter
G1 X107.511 Y94.473 E0.05292 ; perimeter
G1 X108.373 Y94.655 E0.04082 ; perimeter
G1 X108.853 Y94.815 E0.02346 ; perimeter
G1 X109.008 Y94.895 E0.00806 ; perimeter
G1 X109.147 Y95.024 E0.00877 ; perimeter
G1 X109.207 Y95.144 E0.00624 ; perimeter
G1 X109.229 Y95.245 E0.00476 ; perimeter
G1 X109.167 Y95.463 E0.01051 ; perimeter
G1 X109.009 Y95.491 F10800.000 ; move inwards before travel
G1 X108.953 Y95.315 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.358332
G1 F2400.000
G1 X108.777 Y95.224 E0.00518 ; infill
G1 X108.114 Y95.001 E0.01836 ; infill
;WIDTH:0.343652
G1 X107.961 Y94.953 E0.00400 ; infill
;WIDTH:0.312918
G1 X105.983 Y94.506 E0.04552 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.961 Y94.953 E-0.53504 ; wipe and retract
;WIPE_END
G1 E-1.86496 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X103.863 Y94.350 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.849 Y94.428 E0.00364 ; perimeter
G1 X103.776 Y94.574 E0.00759 ; perimeter
G1 X103.682 Y94.676 E0.00640 ; perimeter
G1 X103.558 Y94.725 E0.00617 ; perimeter
G1 X103.327 Y94.740 E0.01076 ; perimeter
G1 X103.110 Y94.655 E0.01078 ; perimeter
G1 X103.014 Y94.470 E0.00969 ; perimeter
G1 X103.031 Y94.294 E0.00817 ; perimeter
G1 X103.081 Y94.119 E0.00846 ; perimeter
G1 X103.135 Y94.048 E0.00413 ; perimeter
G1 X103.254 Y93.985 E0.00622 ; perimeter
G1 X103.421 Y93.943 E0.00796 ; perimeter
G1 X103.640 Y93.998 E0.01048 ; perimeter
G1 X103.812 Y94.179 E0.01158 ; perimeter
G1 X103.846 Y94.293 E0.00547 ; perimeter
G1 X103.798 Y94.395 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.849 Y94.428 E-0.03565 ; wipe and retract
G1 X103.776 Y94.574 E-0.04324 ; wipe and retract
G1 X103.682 Y94.676 E-0.03648 ; wipe and retract
G1 X103.558 Y94.725 E-0.03516 ; wipe and retract
G1 X103.327 Y94.740 E-0.06129 ; wipe and retract
G1 X103.110 Y94.655 E-0.06143 ; wipe and retract
G1 X103.014 Y94.470 E-0.05519 ; wipe and retract
G1 X103.031 Y94.294 E-0.04652 ; wipe and retract
G1 X103.081 Y94.119 E-0.04819 ; wipe and retract
G1 X103.135 Y94.048 E-0.02351 ; wipe and retract
G1 X103.254 Y93.985 E-0.03543 ; wipe and retract
G1 X103.421 Y93.943 E-0.04535 ; wipe and retract
G1 X103.640 Y93.998 E-0.05970 ; wipe and retract
G1 X103.812 Y94.179 E-0.06594 ; wipe and retract
G1 X103.846 Y94.293 E-0.03117 ; wipe and retract
;WIPE_END
G1 E-1.71576 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 X101.564 Y95.394 ; move to first perimeter point
G1 Z20.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.635 Y95.544 E0.00770 ; perimeter
G1 X101.561 Y95.825 E0.01347 ; perimeter
G1 X101.466 Y95.965 E0.00783 ; perimeter
G1 X101.103 Y96.215 E0.02039 ; perimeter
G1 X100.938 Y96.383 E0.01093 ; perimeter
G1 X100.749 Y96.659 E0.01545 ; perimeter
G1 X100.453 Y97.162 E0.02706 ; perimeter
G1 X100.170 Y97.814 E0.03295 ; perimeter
G1 X100.025 Y97.946 E0.00907 ; perimeter
G1 X99.898 Y97.988 E0.00620 ; perimeter
G1 X99.800 Y97.969 E0.00458 ; perimeter
G1 X99.679 Y97.973 E0.00561 ; perimeter
G1 X99.543 Y97.884 E0.00757 ; perimeter
G1 X99.429 Y97.753 E0.00804 ; perimeter
G1 X99.399 Y97.615 E0.00654 ; perimeter
G1 X99.504 Y97.237 E0.01818 ; perimeter
G1 X100.014 Y96.466 E0.04279 ; perimeter
G1 X100.352 Y95.916 E0.02992 ; perimeter
G1 X100.637 Y95.549 E0.02150 ; perimeter
G1 X100.800 Y95.414 E0.00982 ; perimeter
G1 X100.943 Y95.331 E0.00765 ; perimeter
G1 X101.329 Y95.246 E0.01833 ; perimeter
G1 X101.413 Y95.279 E0.00416 ; perimeter
G1 X101.516 Y95.357 E0.00601 ; perimeter
G1 X101.497 Y95.546 F10800.000 ; move inwards before travel
G1 X101.372 Y95.553 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291798
G1 F2400.000
G1 X101.194 Y95.674 E0.00447 ; infill
G1 X101.036 Y95.752 E0.00364 ; infill
G1 X100.852 Y95.912 E0.00504 ; infill
G1 X100.642 Y96.155 E0.00665 ; infill
G1 X100.321 Y96.665 E0.01246 ; infill
;WIDTH:0.31403
G1 X100.110 Y97.004 E0.00901 ; infill
;WIDTH:0.346982
G1 X99.843 Y97.540 E0.01514 ; infill
G1 X99.808 Y97.575 E0.00125 ; infill
;LAYER_CHANGE
;Z:20.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;20.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.843 Y97.540 E-0.01310 ; wipe and retract
G1 X100.110 Y97.004 E-0.15804 ; wipe and retract
;WIPE_END
G1 E-2.22886 F2400.000 ; retract
G1 Z20.675 F10800.000 ; lift Z
G1 Z20.800 ; move to next layer (103)
;AFTER_LAYER_CHANGE
;20.8
G1 X100.053 Y97.993 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.939 Y98.033 E0.00561 ; perimeter
G1 X99.806 Y98.034 E0.00616 ; perimeter
G1 X99.646 Y97.994 E0.00765 ; perimeter
G1 X99.449 Y97.784 E0.01333 ; perimeter
G1 X99.419 Y97.655 E0.00610 ; perimeter
G1 X99.510 Y97.310 E0.01654 ; perimeter
G1 X99.735 Y96.961 E0.01923 ; perimeter
G1 X99.964 Y96.680 E0.01679 ; perimeter
G1 X100.133 Y96.365 E0.01656 ; perimeter
G1 X100.419 Y95.910 E0.02488 ; perimeter
G1 X100.659 Y95.580 E0.01891 ; perimeter
G1 X100.942 Y95.349 E0.01692 ; perimeter
G1 X101.159 Y95.248 E0.01110 ; perimeter
G1 X101.425 Y95.196 E0.01255 ; perimeter
G1 X101.638 Y95.248 E0.01014 ; perimeter
G1 X101.841 Y95.394 E0.01159 ; perimeter
G1 X101.793 Y95.607 E0.01009 ; perimeter
G1 X101.697 Y95.791 E0.00960 ; perimeter
G1 X101.556 Y95.932 E0.00926 ; perimeter
G1 X100.963 Y96.291 E0.03207 ; perimeter
G1 X100.659 Y96.660 E0.02219 ; perimeter
G1 X100.393 Y97.089 E0.02336 ; perimeter
G1 X100.399 Y97.206 E0.00544 ; perimeter
G1 X100.173 Y97.858 E0.03198 ; perimeter
G1 X100.093 Y97.948 E0.00557 ; perimeter
G1 X99.943 Y97.942 F10800.000 ; move inwards before travel
G1 X99.927 Y97.772 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.283792
G1 F2400.000
G1 X99.837 Y97.623 E0.00350 ; infill
G1 X99.882 Y97.474 E0.00312 ; infill
G1 X100.038 Y97.155 E0.00711 ; infill
G1 X99.729 Y97.734 F10800.000 ; move to first infill point
;WIDTH:0.141218
G1 F2400.000
G1 X100.097 Y96.994 E0.00675 ; infill
G1 X100.208 Y96.837 E0.00157 ; infill
;WIDTH:0.162894
G1 X100.416 Y96.481 E0.00411 ; infill
;WIDTH:0.193277
G1 X100.555 Y96.289 E0.00297 ; infill
;WIDTH:0.227521
G1 X100.732 Y96.047 E0.00461 ; infill
;WIDTH:0.234845
G1 X101.260 Y95.474 E0.01243 ; infill
G1 X101.561 Y95.523 F10800.000 ; move to first infill point
;WIDTH:0.364252
G1 F2400.000
G1 X101.211 Y95.664 E0.01008 ; infill
G1 X100.582 Y96.104 E0.02051 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.211 Y95.664 E-0.20254 ; wipe and retract
G1 X101.561 Y95.523 E-0.09957 ; wipe and retract
;WIPE_END
G1 E-2.09789 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X103.001 Y94.752 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.951 Y94.721 E0.00270 ; perimeter
G1 X102.937 Y94.645 E0.00360 ; perimeter
G1 X103.015 Y94.417 E0.01114 ; perimeter
G1 X103.058 Y94.181 E0.01114 ; perimeter
G1 X103.138 Y94.068 E0.00640 ; perimeter
G1 X103.261 Y94.004 E0.00643 ; perimeter
G1 X103.417 Y93.966 E0.00745 ; perimeter
G1 X103.646 Y94.011 E0.01080 ; perimeter
G1 X103.711 Y94.048 E0.00345 ; perimeter
G1 X103.824 Y94.202 E0.00886 ; perimeter
G1 X103.874 Y94.386 E0.00880 ; perimeter
G1 X103.818 Y94.569 E0.00889 ; perimeter
G1 X103.697 Y94.691 E0.00798 ; perimeter
G1 X103.562 Y94.756 E0.00690 ; perimeter
G1 X103.321 Y94.774 E0.01120 ; perimeter
G1 X103.275 Y94.756 E0.00228 ; perimeter
G1 X103.061 Y94.753 E0.00994 ; perimeter
G1 X102.993 Y94.694 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.951 Y94.721 E-0.03011 ; wipe and retract
G1 X102.937 Y94.645 E-0.02049 ; wipe and retract
G1 X103.015 Y94.417 E-0.06345 ; wipe and retract
G1 X103.058 Y94.181 E-0.06349 ; wipe and retract
G1 X103.138 Y94.068 E-0.03643 ; wipe and retract
G1 X103.261 Y94.004 E-0.03662 ; wipe and retract
G1 X103.417 Y93.966 E-0.04246 ; wipe and retract
G1 X103.646 Y94.011 E-0.06152 ; wipe and retract
G1 X103.711 Y94.048 E-0.01968 ; wipe and retract
G1 X103.824 Y94.202 E-0.05045 ; wipe and retract
G1 X103.874 Y94.386 E-0.05016 ; wipe and retract
G1 X103.818 Y94.569 E-0.05063 ; wipe and retract
G1 X103.697 Y94.691 E-0.04549 ; wipe and retract
G1 X103.562 Y94.756 E-0.03928 ; wipe and retract
G1 X103.321 Y94.774 E-0.06380 ; wipe and retract
G1 X103.275 Y94.756 E-0.01301 ; wipe and retract
G1 X103.061 Y94.753 E-0.05665 ; wipe and retract
;WIPE_END
G1 E-1.65630 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X105.867 Y94.488 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.941 Y94.337 E0.00777 ; perimeter
G1 X106.090 Y94.229 E0.00853 ; perimeter
G1 X106.263 Y94.196 E0.00816 ; perimeter
G1 X106.524 Y94.215 E0.01213 ; perimeter
G1 X108.414 Y94.675 E0.09008 ; perimeter
G1 X108.923 Y94.816 E0.02446 ; perimeter
G1 X109.091 Y94.903 E0.00877 ; perimeter
G1 X109.251 Y95.061 E0.01040 ; perimeter
G1 X109.346 Y95.267 E0.01051 ; perimeter
G1 X109.307 Y95.419 E0.00728 ; perimeter
G1 X109.235 Y95.523 E0.00583 ; perimeter
G1 X109.137 Y95.601 E0.00582 ; perimeter
G1 X108.868 Y95.644 E0.01264 ; perimeter
G1 X108.402 Y95.522 E0.02232 ; perimeter
G1 X107.843 Y95.314 E0.02762 ; perimeter
G1 X106.076 Y94.934 E0.08371 ; perimeter
G1 X105.919 Y94.763 E0.01073 ; perimeter
G1 X105.878 Y94.547 E0.01022 ; perimeter
G1 X106.024 Y94.428 F10800.000 ; move inwards before travel
G1 X106.121 Y94.533 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31669
G1 F2400.000
G1 X106.283 Y94.587 E0.00389 ; infill
G1 X106.820 Y94.689 E0.01244 ; infill
G1 X107.957 Y94.953 E0.02658 ; infill
;WIDTH:0.356656
G1 X108.773 Y95.198 E0.02221 ; infill
G1 X109.063 Y95.348 E0.00853 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.773 Y95.198 E-0.08630 ; wipe and retract
G1 X107.957 Y94.953 E-0.22470 ; wipe and retract
;WIPE_END
G1 E-2.08900 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X111.361 Y96.973 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.486 Y96.863 E0.00771 ; perimeter
G1 X111.638 Y96.824 E0.00730 ; perimeter
G1 X111.748 Y96.835 E0.00508 ; perimeter
G1 X111.881 Y96.889 E0.00666 ; perimeter
G1 X112.037 Y97.028 E0.00969 ; perimeter
G1 X112.120 Y97.273 E0.01200 ; perimeter
G1 X112.075 Y97.521 E0.01165 ; perimeter
G1 X111.983 Y97.640 E0.00696 ; perimeter
G1 X111.850 Y97.704 E0.00687 ; perimeter
G1 X111.664 Y97.696 E0.00862 ; perimeter
G1 X111.487 Y97.609 E0.00915 ; perimeter
G1 X111.348 Y97.431 E0.01043 ; perimeter
G1 X111.287 Y97.214 E0.01045 ; perimeter
G1 X111.286 Y97.159 E0.00256 ; perimeter
G1 X111.339 Y97.029 E0.00650 ; perimeter
G1 X111.526 Y96.996 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.486 Y96.863 E-0.05853 ; wipe and retract
G1 X111.638 Y96.824 E-0.04160 ; wipe and retract
G1 X111.748 Y96.835 E-0.02894 ; wipe and retract
G1 X111.881 Y96.889 E-0.03796 ; wipe and retract
G1 X112.037 Y97.028 E-0.05521 ; wipe and retract
G1 X112.120 Y97.273 E-0.06834 ; wipe and retract
G1 X112.075 Y97.521 E-0.06640 ; wipe and retract
G1 X111.983 Y97.640 E-0.03968 ; wipe and retract
G1 X111.850 Y97.704 E-0.03913 ; wipe and retract
G1 X111.664 Y97.696 E-0.04909 ; wipe and retract
G1 X111.487 Y97.609 E-0.05210 ; wipe and retract
G1 X111.348 Y97.431 E-0.05940 ; wipe and retract
G1 X111.287 Y97.214 E-0.05954 ; wipe and retract
G1 X111.286 Y97.159 E-0.01457 ; wipe and retract
G1 X111.339 Y97.029 E-0.03701 ; wipe and retract
;WIPE_END
G1 E-1.69251 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X113.985 Y100.834 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.173 Y100.774 E0.00914 ; perimeter
G1 X114.368 Y100.792 E0.00905 ; perimeter
G1 X114.485 Y100.851 E0.00609 ; perimeter
G1 X114.655 Y101.016 E0.01094 ; perimeter
G1 X114.728 Y101.179 E0.00828 ; perimeter
G1 X114.733 Y101.315 E0.00631 ; perimeter
G1 X114.647 Y101.526 E0.01056 ; perimeter
G1 X114.578 Y101.596 E0.00457 ; perimeter
G1 X114.479 Y101.628 E0.00482 ; perimeter
G1 X114.253 Y101.610 E0.01051 ; perimeter
G1 X114.008 Y101.479 E0.01285 ; perimeter
G1 X113.906 Y101.324 E0.00859 ; perimeter
G1 X113.862 Y101.181 E0.00691 ; perimeter
G1 X113.857 Y101.098 E0.00385 ; perimeter
G1 X113.898 Y100.953 E0.00700 ; perimeter
G1 X113.950 Y100.882 E0.00407 ; perimeter
G1 X114.161 Y100.923 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.173 Y100.774 E-0.06553 ; wipe and retract
G1 X114.368 Y100.792 E-0.05158 ; wipe and retract
G1 X114.485 Y100.851 E-0.03471 ; wipe and retract
G1 X114.655 Y101.016 E-0.06235 ; wipe and retract
G1 X114.728 Y101.179 E-0.04717 ; wipe and retract
G1 X114.733 Y101.315 E-0.03597 ; wipe and retract
G1 X114.647 Y101.526 E-0.06016 ; wipe and retract
G1 X114.578 Y101.596 E-0.02603 ; wipe and retract
G1 X114.479 Y101.628 E-0.02745 ; wipe and retract
G1 X114.253 Y101.610 E-0.05988 ; wipe and retract
G1 X114.008 Y101.479 E-0.07322 ; wipe and retract
G1 X113.906 Y101.324 E-0.04896 ; wipe and retract
G1 X113.862 Y101.181 E-0.03935 ; wipe and retract
G1 X113.857 Y101.098 E-0.02195 ; wipe and retract
G1 X113.898 Y100.953 E-0.03987 ; wipe and retract
G1 X113.950 Y100.882 E-0.02316 ; wipe and retract
;WIPE_END
G1 E-1.68267 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X115.232 Y106.504 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.191 Y106.420 E0.00428 ; perimeter
G1 X115.156 Y106.141 E0.01307 ; perimeter
G1 X115.157 Y106.066 E0.00345 ; perimeter
G1 X115.229 Y105.883 E0.00910 ; perimeter
G1 X115.292 Y105.812 E0.00439 ; perimeter
G1 X115.407 Y105.758 E0.00588 ; perimeter
G1 X115.542 Y105.748 E0.00629 ; perimeter
G1 X115.685 Y105.785 E0.00683 ; perimeter
G1 X115.756 Y105.832 E0.00392 ; perimeter
G1 X115.831 Y105.947 E0.00639 ; perimeter
G1 X115.872 Y106.148 E0.00950 ; perimeter
G1 X115.822 Y106.429 E0.01322 ; perimeter
G1 X115.663 Y106.607 E0.01102 ; perimeter
G1 X115.564 Y106.634 E0.00475 ; perimeter
G1 X115.366 Y106.600 E0.00933 ; perimeter
G1 X115.280 Y106.539 E0.00488 ; perimeter
G1 X115.263 Y106.417 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.191 Y106.420 E-0.03907 ; wipe and retract
G1 X115.156 Y106.141 E-0.07446 ; wipe and retract
G1 X115.157 Y106.066 E-0.01963 ; wipe and retract
G1 X115.229 Y105.883 E-0.05184 ; wipe and retract
G1 X115.292 Y105.812 E-0.02503 ; wipe and retract
G1 X115.407 Y105.758 E-0.03350 ; wipe and retract
G1 X115.542 Y105.748 E-0.03584 ; wipe and retract
G1 X115.685 Y105.785 E-0.03890 ; wipe and retract
G1 X115.756 Y105.832 E-0.02234 ; wipe and retract
G1 X115.831 Y105.947 E-0.03642 ; wipe and retract
G1 X115.872 Y106.148 E-0.05411 ; wipe and retract
G1 X115.822 Y106.429 E-0.07529 ; wipe and retract
G1 X115.663 Y106.607 E-0.06279 ; wipe and retract
G1 X115.564 Y106.634 E-0.02706 ; wipe and retract
G1 X115.366 Y106.600 E-0.05317 ; wipe and retract
G1 X115.280 Y106.539 E-0.02779 ; wipe and retract
;WIPE_END
G1 E-1.72278 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X115.416 Y110.718 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.642 Y110.742 E0.01054 ; perimeter
G1 X115.785 Y110.820 E0.00757 ; perimeter
G1 X115.870 Y110.950 E0.00717 ; perimeter
G1 X115.896 Y111.093 E0.00676 ; perimeter
G1 X115.802 Y111.424 E0.01593 ; perimeter
G1 X115.721 Y111.497 E0.00505 ; perimeter
G1 X115.561 Y111.558 E0.00794 ; perimeter
G1 X115.514 Y111.567 E0.00220 ; perimeter
G1 X115.375 Y111.531 E0.00666 ; perimeter
G1 X115.298 Y111.491 E0.00401 ; perimeter
G1 X115.156 Y111.295 E0.01120 ; perimeter
G1 X115.123 Y111.141 E0.00733 ; perimeter
G1 X115.143 Y110.996 E0.00677 ; perimeter
G1 X115.248 Y110.814 E0.00973 ; perimeter
G1 X115.364 Y110.748 E0.00618 ; perimeter
G1 X115.565 Y110.889 F10800.000 ; move inwards before travel
G1 X115.509 Y111.101 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273248
G1 F2400.000
G1 X115.544 Y111.077 E0.00080 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.509 Y111.101 E-0.01109 ; wipe and retract
;WIPE_END
G1 E-2.38891 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X115.207 Y114.602 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.320 Y114.572 E0.00543 ; perimeter
G1 X115.504 Y114.589 E0.00857 ; perimeter
G1 X115.601 Y114.635 E0.00495 ; perimeter
G1 X115.687 Y114.705 E0.00515 ; perimeter
G1 X115.747 Y114.792 E0.00488 ; perimeter
G1 X115.784 Y114.977 E0.00877 ; perimeter
G1 X115.737 Y115.165 E0.00894 ; perimeter
G1 X115.492 Y115.515 E0.01979 ; perimeter
G1 X115.267 Y115.742 E0.01483 ; perimeter
G1 X115.159 Y115.791 E0.00546 ; perimeter
G1 X115.052 Y115.809 E0.00506 ; perimeter
G1 X114.183 Y115.638 E0.04098 ; perimeter
G1 X113.611 Y115.845 E0.02820 ; perimeter
G1 X113.485 Y115.847 E0.00585 ; perimeter
G1 X113.295 Y115.784 E0.00924 ; perimeter
G1 X113.164 Y115.661 E0.00835 ; perimeter
G1 X113.108 Y115.544 E0.00599 ; perimeter
G1 X113.071 Y115.372 E0.00818 ; perimeter
G1 X113.118 Y115.242 E0.00639 ; perimeter
G1 X113.111 Y115.163 E0.00367 ; perimeter
G1 X113.187 Y115.095 E0.00473 ; perimeter
G1 X113.548 Y115.026 E0.01701 ; perimeter
G1 X114.225 Y115.286 E0.03360 ; perimeter
G1 X114.484 Y115.248 E0.01213 ; perimeter
G1 X114.776 Y115.001 E0.01773 ; perimeter
G1 X115.112 Y114.652 E0.02244 ; perimeter
G1 X115.154 Y114.630 E0.00217 ; perimeter
G1 X115.302 Y114.671 F10800.000 ; move inwards before travel
G1 X115.322 Y114.821 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.334531
G1 F2400.000
G1 X115.356 Y114.992 E0.00422 ; infill
;WIDTH:0.432236
G1 X115.156 Y115.235 E0.01019 ; infill
G1 X114.852 Y115.524 E0.01359 ; infill
G1 X114.850 Y115.524 F10800.000 ; move to first infill point
;WIDTH:0.308173
G1 F2400.000
G1 X115.410 Y114.951 E0.01766 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.850 Y115.524 E-0.21124 ; wipe and retract
;WIPE_END
G1 E-2.18876 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X112.333 Y114.606 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.151 Y114.606 E0.00843 ; perimeter
G1 X111.917 Y114.573 E0.01092 ; perimeter
G1 X111.819 Y114.534 E0.00491 ; perimeter
G1 X111.584 Y114.391 E0.01273 ; perimeter
G1 X111.295 Y114.059 E0.02040 ; perimeter
G1 X111.168 Y113.725 E0.01656 ; perimeter
G1 X111.260 Y113.423 E0.01461 ; perimeter
G1 X111.403 Y113.273 E0.00959 ; perimeter
G1 X111.521 Y113.211 E0.00620 ; perimeter
G1 X111.759 Y113.243 E0.01111 ; perimeter
G1 X111.812 Y113.271 E0.00277 ; perimeter
G1 X111.942 Y113.399 E0.00848 ; perimeter
G1 X112.058 Y113.592 E0.01043 ; perimeter
G1 X112.300 Y113.908 E0.01840 ; perimeter
G1 X112.427 Y114.153 E0.01280 ; perimeter
G1 X112.444 Y114.200 E0.00231 ; perimeter
G1 X112.439 Y114.387 E0.00867 ; perimeter
G1 X112.472 Y114.520 E0.00635 ; perimeter
G1 X112.386 Y114.577 E0.00480 ; perimeter
G1 X112.190 Y114.492 F10800.000 ; move inwards before travel
G1 X112.199 Y114.363 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350355
G1 F2400.000
G1 X111.437 Y113.674 E0.02624 ; infill
G1 X111.597 Y113.465 F10800.000 ; move to first infill point
;WIDTH:0.42759
G1 F2400.000
G1 X111.626 Y113.712 E0.00795 ; infill
G1 X111.682 Y113.827 E0.00409 ; infill
G1 X111.867 Y114.056 E0.00941 ; infill
G1 X112.199 Y114.354 E0.01427 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.867 Y114.056 E-0.11774 ; wipe and retract
G1 X111.682 Y113.827 E-0.07768 ; wipe and retract
G1 X111.626 Y113.712 E-0.03376 ; wipe and retract
G1 X111.597 Y113.465 E-0.06560 ; wipe and retract
;WIPE_END
G1 E-2.10522 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X109.432 Y111.339 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.262 Y111.381 E0.00811 ; perimeter
G1 X109.051 Y111.372 E0.00979 ; perimeter
G1 X108.801 Y111.259 E0.01267 ; perimeter
G1 X108.667 Y111.115 E0.00913 ; perimeter
G1 X108.610 Y110.990 E0.00634 ; perimeter
G1 X108.602 Y110.863 E0.00590 ; perimeter
G1 X108.652 Y110.697 E0.00806 ; perimeter
G1 X108.746 Y110.606 E0.00605 ; perimeter
G1 X108.915 Y110.538 E0.00845 ; perimeter
G1 X109.156 Y110.557 E0.01116 ; perimeter
G1 X109.319 Y110.621 E0.00812 ; perimeter
G1 X109.415 Y110.692 E0.00551 ; perimeter
G1 X109.529 Y110.821 E0.00800 ; perimeter
G1 X109.587 Y110.974 E0.00756 ; perimeter
G1 X109.575 Y111.138 E0.00765 ; perimeter
G1 X109.533 Y111.248 E0.00543 ; perimeter
G1 X109.480 Y111.304 E0.00359 ; perimeter
G1 X109.284 Y111.245 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.262 Y111.381 E-0.06096 ; wipe and retract
G1 X109.051 Y111.372 E-0.05580 ; wipe and retract
G1 X108.801 Y111.259 E-0.07216 ; wipe and retract
G1 X108.667 Y111.115 E-0.05202 ; wipe and retract
G1 X108.610 Y110.990 E-0.03613 ; wipe and retract
G1 X108.602 Y110.863 E-0.03362 ; wipe and retract
G1 X108.652 Y110.697 E-0.04590 ; wipe and retract
G1 X108.746 Y110.606 E-0.03444 ; wipe and retract
G1 X108.915 Y110.538 E-0.04816 ; wipe and retract
G1 X109.156 Y110.557 E-0.06357 ; wipe and retract
G1 X109.319 Y110.621 E-0.04628 ; wipe and retract
G1 X109.415 Y110.692 E-0.03141 ; wipe and retract
G1 X109.529 Y110.821 E-0.04556 ; wipe and retract
G1 X109.587 Y110.974 E-0.04306 ; wipe and retract
G1 X109.575 Y111.138 E-0.04358 ; wipe and retract
G1 X109.533 Y111.248 E-0.03096 ; wipe and retract
G1 X109.480 Y111.304 E-0.02043 ; wipe and retract
;WIPE_END
G1 E-1.63595 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X103.483 Y108.095 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.414 Y107.882 E0.01036 ; perimeter
G1 X103.426 Y107.827 E0.00264 ; perimeter
G1 X103.389 Y107.553 E0.01280 ; perimeter
G1 X103.607 Y107.437 E0.01142 ; perimeter
G1 X103.705 Y107.500 E0.00540 ; perimeter
G1 X103.889 Y107.482 E0.00856 ; perimeter
G1 X104.042 Y107.543 E0.00761 ; perimeter
G1 X104.682 Y107.938 E0.03483 ; perimeter
G1 X104.930 Y108.132 E0.01463 ; perimeter
G1 X105.057 Y108.290 E0.00937 ; perimeter
G1 X105.157 Y108.477 E0.00983 ; perimeter
G1 X105.153 Y108.611 E0.00622 ; perimeter
G1 X105.086 Y108.679 E0.00440 ; perimeter
G1 X104.984 Y108.720 E0.00509 ; perimeter
G1 X104.743 Y108.750 E0.01127 ; perimeter
G1 X104.437 Y108.671 E0.01463 ; perimeter
G1 X104.245 Y108.661 E0.00889 ; perimeter
G1 X103.998 Y108.531 E0.01295 ; perimeter
G1 X103.596 Y108.249 E0.02272 ; perimeter
G1 X103.519 Y108.143 E0.00608 ; perimeter
G1 X103.600 Y107.904 F10800.000 ; move inwards before travel
G1 X103.705 Y107.990 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.366074
G1 F2400.000
G1 X104.489 Y108.283 E0.02249 ; infill
;WIDTH:0.260879
G1 X104.683 Y108.383 E0.00396 ; infill
G1 X104.843 Y108.494 E0.00353 ; infill
G1 X104.813 Y108.498 F10800.000 ; move to first infill point
;WIDTH:0.424374
G1 F2400.000
G1 X104.223 Y108.162 E0.02153 ; infill
G1 X103.894 Y107.946 E0.01247 ; infill
;WIDTH:0.401108
G1 X103.856 Y107.910 E0.00155 ; infill
;WIDTH:0.381114
G1 X103.832 Y107.886 E0.00095 ; infill
;WIDTH:0.354206
G1 X103.815 Y107.875 E0.00055 ; infill
;WIDTH:0.327692
G1 X103.797 Y107.863 E0.00050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.815 Y107.875 E-0.00557 ; wipe and retract
;WIPE_END
G1 E-2.39443 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X101.282 Y105.460 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.183 Y105.561 E0.00658 ; perimeter
G1 X101.050 Y105.577 E0.00618 ; perimeter
G1 X100.830 Y105.568 E0.01022 ; perimeter
G1 X100.728 Y105.501 E0.00565 ; perimeter
G1 X100.565 Y105.286 E0.01250 ; perimeter
G1 X100.454 Y104.956 E0.01613 ; perimeter
G1 X100.401 Y104.626 E0.01548 ; perimeter
G1 X100.451 Y104.242 E0.01794 ; perimeter
G1 X100.531 Y104.066 E0.00893 ; perimeter
G1 X100.587 Y103.997 E0.00412 ; perimeter
G1 X100.703 Y103.994 E0.00540 ; perimeter
G1 X100.860 Y104.082 E0.00831 ; perimeter
G1 X100.972 Y104.194 E0.00734 ; perimeter
G1 X101.148 Y104.473 E0.01530 ; perimeter
G1 X101.349 Y105.004 E0.02629 ; perimeter
G1 X101.345 Y105.345 E0.01576 ; perimeter
G1 X101.311 Y105.407 E0.00331 ; perimeter
G1 X101.140 Y105.454 F10800.000 ; move inwards before travel
G1 X101.075 Y105.327 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.1681
G1 F2400.000
G1 X101.039 Y105.272 E0.00068 ; infill
;WIDTH:0.186186
G1 X100.644 Y104.575 E0.00954 ; infill
G1 X100.695 Y104.288 F10800.000 ; move to first infill point
;WIDTH:0.318614
G1 F2400.000
G1 X100.781 Y104.601 E0.00745 ; infill
;WIDTH:0.338457
G1 X100.799 Y104.647 E0.00122 ; infill
;WIDTH:0.382266
G1 X100.854 Y104.857 E0.00614 ; infill
;WIDTH:0.391097
G1 X100.933 Y105.078 E0.00677 ; infill
G1 X100.973 Y105.332 E0.00746 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.933 Y105.078 E-0.06801 ; wipe and retract
G1 X100.854 Y104.857 E-0.06173 ; wipe and retract
;WIPE_END
G1 E-2.27025 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 X100.383 Y102.243 ; move to first perimeter point
G1 Z20.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.334 Y102.300 E0.00350 ; perimeter
G1 X100.097 Y102.348 E0.01119 ; perimeter
G1 X99.864 Y102.221 E0.01229 ; perimeter
G1 X99.726 Y102.077 E0.00927 ; perimeter
G1 X99.651 Y101.926 E0.00779 ; perimeter
G1 X99.622 Y101.746 E0.00845 ; perimeter
G1 X99.640 Y101.592 E0.00717 ; perimeter
G1 X99.693 Y101.523 E0.00401 ; perimeter
G1 X99.896 Y101.347 E0.01250 ; perimeter
G1 X99.997 Y101.324 E0.00479 ; perimeter
G1 X100.238 Y101.330 E0.01116 ; perimeter
G1 X100.376 Y101.447 E0.00839 ; perimeter
G1 X100.435 Y101.541 E0.00509 ; perimeter
G1 X100.487 Y101.856 E0.01480 ; perimeter
G1 X100.467 Y102.144 E0.01337 ; perimeter
G1 X100.434 Y102.212 E0.00348 ; perimeter
G1 X100.308 Y102.240 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:21
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;21
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.334 Y102.300 E-0.03525 ; wipe and retract
G1 X100.097 Y102.348 E-0.06375 ; wipe and retract
G1 X99.864 Y102.221 E-0.07004 ; wipe and retract
G1 X99.726 Y102.077 E-0.05282 ; wipe and retract
G1 X99.651 Y101.926 E-0.04438 ; wipe and retract
G1 X99.622 Y101.746 E-0.04816 ; wipe and retract
G1 X99.640 Y101.592 E-0.04085 ; wipe and retract
G1 X99.693 Y101.523 E-0.02287 ; wipe and retract
G1 X99.896 Y101.347 E-0.07118 ; wipe and retract
G1 X99.997 Y101.324 E-0.02729 ; wipe and retract
G1 X100.238 Y101.330 E-0.06357 ; wipe and retract
G1 X100.376 Y101.447 E-0.04782 ; wipe and retract
G1 X100.435 Y101.541 E-0.02902 ; wipe and retract
G1 X100.487 Y101.856 E-0.08430 ; wipe and retract
G1 X100.467 Y102.144 E-0.07618 ; wipe and retract
G1 X100.434 Y102.212 E-0.01981 ; wipe and retract
;WIPE_END
G1 E-1.60270 F2400.000 ; retract
G1 Z20.875 F10800.000 ; lift Z
G1 Z21.000 ; move to next layer (104)
;AFTER_LAYER_CHANGE
;21
G1 Z21.075 ; lift Z
G1 X101.194 Y105.478 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.070 Y105.517 E0.00602 ; perimeter
G1 X100.784 Y105.491 E0.01328 ; perimeter
G1 X100.711 Y105.455 E0.00377 ; perimeter
G1 X100.570 Y105.260 E0.01116 ; perimeter
G1 X100.440 Y104.879 E0.01866 ; perimeter
G1 X100.350 Y104.410 E0.02209 ; perimeter
G1 X100.385 Y103.963 E0.02080 ; perimeter
G1 X100.412 Y103.884 E0.00383 ; perimeter
G1 X100.581 Y103.655 E0.01318 ; perimeter
G1 X100.640 Y103.760 E0.00557 ; perimeter
G1 X100.903 Y103.913 E0.01410 ; perimeter
G1 X101.077 Y104.223 E0.01645 ; perimeter
G1 X101.346 Y104.958 E0.03626 ; perimeter
G1 X101.338 Y105.251 E0.01359 ; perimeter
G1 X101.294 Y105.386 E0.00653 ; perimeter
G1 X101.238 Y105.437 E0.00353 ; perimeter
G1 X101.080 Y105.415 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.070 Y105.517 E-0.04910 ; wipe and retract
G1 X100.784 Y105.491 E-0.07567 ; wipe and retract
G1 X100.711 Y105.455 E-0.02150 ; wipe and retract
G1 X100.570 Y105.260 E-0.06358 ; wipe and retract
G1 X100.440 Y104.879 E-0.10628 ; wipe and retract
G1 X100.350 Y104.410 E-0.12586 ; wipe and retract
G1 X100.385 Y103.963 E-0.11848 ; wipe and retract
G1 X100.412 Y103.884 E-0.02180 ; wipe and retract
G1 X100.581 Y103.655 E-0.07509 ; wipe and retract
G1 X100.640 Y103.760 E-0.03172 ; wipe and retract
G1 X100.903 Y103.913 E-0.08031 ; wipe and retract
G1 X101.077 Y104.223 E-0.09374 ; wipe and retract
G1 X101.346 Y104.958 E-0.20656 ; wipe and retract
G1 X101.338 Y105.251 E-0.07744 ; wipe and retract
G1 X101.294 Y105.386 E-0.03722 ; wipe and retract
G1 X101.238 Y105.437 E-0.02009 ; wipe and retract
;WIPE_END
G1 E-1.19558 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X100.155 Y102.452 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X99.897 Y102.308 E0.01370 ; perimeter
G1 X99.779 Y102.156 E0.00890 ; perimeter
G1 X99.718 Y102.013 E0.00718 ; perimeter
G1 X99.668 Y101.755 E0.01219 ; perimeter
G1 X99.684 Y101.556 E0.00927 ; perimeter
G1 X99.736 Y101.490 E0.00387 ; perimeter
G1 X99.767 Y101.390 E0.00484 ; perimeter
G1 X99.917 Y101.287 E0.00845 ; perimeter
G1 X100.093 Y101.215 E0.00879 ; perimeter
G1 X100.263 Y101.254 E0.00806 ; perimeter
G1 X100.462 Y101.452 E0.01305 ; perimeter
G1 X100.544 Y101.925 E0.02220 ; perimeter
G1 X100.548 Y102.281 E0.01652 ; perimeter
G1 X100.492 Y102.382 E0.00535 ; perimeter
G1 X100.483 Y102.504 E0.00565 ; perimeter
G1 X100.374 Y102.647 E0.00834 ; perimeter
G1 X100.280 Y102.654 E0.00436 ; perimeter
G1 X100.187 Y102.503 E0.00824 ; perimeter
G1 X100.173 Y102.157 F10800.000 ; move inwards before travel
G1 X100.230 Y102.218 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.369747
G1 F2400.000
G1 X100.117 Y101.892 E0.00937 ; infill
G1 X100.088 Y101.732 E0.00440 ; infill
G1 X100.098 Y101.648 E0.00231 ; infill
;WIDTH:0.346052
G1 X100.096 Y101.633 E0.00037 ; infill
;WIDTH:0.333951
G1 X100.111 Y101.468 E0.00401 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.096 Y101.633 E-0.04375 ; wipe and retract
;WIPE_END
G1 E-2.35625 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X100.689 Y104.066 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.321185
G1 F2400.000
G1 X100.733 Y104.389 E0.00754 ; infill
;WIDTH:0.352853
G1 X100.786 Y104.581 E0.00513 ; infill
;WIDTH:0.375026
G1 X100.997 Y105.268 E0.01985 ; infill
G1 X101.078 Y105.257 F10800.000 ; move to first infill point
;WIDTH:0.152446
G1 F2400.000
G1 X101.038 Y105.217 E0.00052 ; infill
;WIDTH:0.189232
G1 X100.632 Y104.599 E0.00900 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.038 Y105.217 E-0.19523 ; wipe and retract
;WIPE_END
G1 E-2.20477 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X103.231 Y107.536 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.256 Y107.341 E0.00911 ; perimeter
G1 X103.307 Y107.287 E0.00343 ; perimeter
G1 X103.503 Y107.265 E0.00915 ; perimeter
G1 X103.795 Y107.354 E0.01413 ; perimeter
G1 X104.306 Y107.687 E0.02826 ; perimeter
G1 X104.591 Y107.912 E0.01684 ; perimeter
G1 X104.822 Y108.001 E0.01147 ; perimeter
G1 X105.145 Y108.209 E0.01777 ; perimeter
G1 X105.346 Y108.428 E0.01376 ; perimeter
G1 X105.421 Y108.575 E0.00766 ; perimeter
G1 X105.435 Y108.662 E0.00408 ; perimeter
G1 X105.409 Y108.741 E0.00382 ; perimeter
G1 X105.292 Y108.831 E0.00685 ; perimeter
G1 X105.004 Y108.864 E0.01346 ; perimeter
G1 X104.706 Y108.814 E0.01397 ; perimeter
G1 X104.457 Y108.736 E0.01207 ; perimeter
G1 X104.195 Y108.603 E0.01362 ; perimeter
G1 X103.598 Y108.188 E0.03368 ; perimeter
G1 X103.449 Y108.023 E0.01031 ; perimeter
G1 X103.408 Y107.901 E0.00593 ; perimeter
G1 X103.248 Y107.661 E0.01339 ; perimeter
G1 X103.239 Y107.596 E0.00305 ; perimeter
G1 X103.395 Y107.427 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.256 Y107.341 E-0.06731 ; wipe and retract
G1 X103.307 Y107.287 E-0.01953 ; wipe and retract
G1 X103.503 Y107.265 E-0.05212 ; wipe and retract
G1 X103.795 Y107.354 E-0.08052 ; wipe and retract
G1 X104.306 Y107.687 E-0.16102 ; wipe and retract
G1 X104.591 Y107.912 E-0.09594 ; wipe and retract
G1 X104.822 Y108.001 E-0.06536 ; wipe and retract
G1 X105.145 Y108.209 E-0.10124 ; wipe and retract
G1 X105.346 Y108.428 E-0.07840 ; wipe and retract
G1 X105.421 Y108.575 E-0.04364 ; wipe and retract
G1 X105.435 Y108.662 E-0.02326 ; wipe and retract
G1 X105.409 Y108.741 E-0.02176 ; wipe and retract
G1 X105.292 Y108.831 E-0.03904 ; wipe and retract
G1 X105.004 Y108.864 E-0.07668 ; wipe and retract
G1 X104.706 Y108.814 E-0.07960 ; wipe and retract
G1 X104.457 Y108.736 E-0.06875 ; wipe and retract
G1 X104.195 Y108.603 E-0.07757 ; wipe and retract
G1 X103.598 Y108.188 E-0.19187 ; wipe and retract
G1 X103.449 Y108.023 E-0.05871 ; wipe and retract
G1 X103.408 Y107.901 E-0.03378 ; wipe and retract
G1 X103.248 Y107.661 E-0.07627 ; wipe and retract
G1 X103.239 Y107.596 E-0.01740 ; wipe and retract
;WIPE_END
G1 E-0.87023 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X105.138 Y108.557 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.338267
G1 F2400.000
G1 X104.797 Y108.435 E0.00891 ; infill
G1 X104.399 Y108.262 E0.01065 ; infill
G1 X103.867 Y107.883 E0.01604 ; infill
G1 X103.476 Y107.549 E0.01262 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.867 Y107.883 E-0.13558 ; wipe and retract
G1 X104.399 Y108.262 E-0.17233 ; wipe and retract
G1 X104.797 Y108.435 E-0.11447 ; wipe and retract
G1 X105.138 Y108.557 E-0.09571 ; wipe and retract
;WIPE_END
G1 E-1.88192 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X108.747 Y110.754 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.858 Y110.645 E0.00722 ; perimeter
G1 X108.964 Y110.601 E0.00529 ; perimeter
G1 X109.245 Y110.601 E0.01302 ; perimeter
G1 X109.401 Y110.654 E0.00762 ; perimeter
G1 X109.642 Y110.877 E0.01524 ; perimeter
G1 X109.705 Y111.044 E0.00827 ; perimeter
G1 X109.687 Y111.195 E0.00703 ; perimeter
G1 X109.642 Y111.296 E0.00510 ; perimeter
G1 X109.585 Y111.361 E0.00403 ; perimeter
G1 X109.519 Y111.400 E0.00355 ; perimeter
G1 X109.357 Y111.437 E0.00772 ; perimeter
G1 X109.128 Y111.416 E0.01063 ; perimeter
G1 X108.922 Y111.315 E0.01061 ; perimeter
G1 X108.761 Y111.144 E0.01089 ; perimeter
G1 X108.717 Y111.038 E0.00533 ; perimeter
G1 X108.734 Y110.813 E0.01046 ; perimeter
G1 X108.903 Y110.753 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.858 Y110.645 E-0.05521 ; wipe and retract
G1 X108.964 Y110.601 E-0.03011 ; wipe and retract
G1 X109.245 Y110.601 E-0.07420 ; wipe and retract
G1 X109.401 Y110.654 E-0.04343 ; wipe and retract
G1 X109.642 Y110.877 E-0.08679 ; wipe and retract
G1 X109.705 Y111.044 E-0.04711 ; wipe and retract
G1 X109.687 Y111.195 E-0.04005 ; wipe and retract
G1 X109.642 Y111.296 E-0.02907 ; wipe and retract
G1 X109.585 Y111.361 E-0.02294 ; wipe and retract
G1 X109.519 Y111.400 E-0.02025 ; wipe and retract
G1 X109.357 Y111.437 E-0.04400 ; wipe and retract
G1 X109.128 Y111.416 E-0.06055 ; wipe and retract
G1 X108.922 Y111.315 E-0.06045 ; wipe and retract
G1 X108.761 Y111.144 E-0.06204 ; wipe and retract
G1 X108.717 Y111.038 E-0.03039 ; wipe and retract
G1 X108.734 Y110.813 E-0.05958 ; wipe and retract
;WIPE_END
G1 E-1.63384 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X114.403 Y115.262 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.585 Y115.186 E0.00911 ; perimeter
G1 X115.105 Y114.660 E0.03426 ; perimeter
G1 X115.201 Y114.609 E0.00506 ; perimeter
G1 X115.321 Y114.580 E0.00573 ; perimeter
G1 X115.493 Y114.593 E0.00796 ; perimeter
G1 X115.597 Y114.641 E0.00532 ; perimeter
G1 X115.682 Y114.711 E0.00509 ; perimeter
G1 X115.742 Y114.796 E0.00481 ; perimeter
G1 X115.771 Y114.881 E0.00416 ; perimeter
G1 X115.781 Y114.971 E0.00420 ; perimeter
G1 X115.731 Y115.174 E0.00968 ; perimeter
G1 X115.519 Y115.482 E0.01732 ; perimeter
G1 X115.296 Y115.713 E0.01488 ; perimeter
G1 X115.173 Y115.769 E0.00626 ; perimeter
G1 X115.054 Y115.787 E0.00557 ; perimeter
G1 X114.825 Y115.745 E0.01077 ; perimeter
G1 X114.602 Y115.663 E0.01100 ; perimeter
G1 X114.245 Y115.571 E0.01707 ; perimeter
G1 X113.906 Y115.672 E0.01640 ; perimeter
G1 X113.779 Y115.745 E0.00675 ; perimeter
G1 X113.585 Y115.811 E0.00949 ; perimeter
G1 X113.477 Y115.810 E0.00500 ; perimeter
G1 X113.324 Y115.773 E0.00734 ; perimeter
G1 X113.236 Y115.720 E0.00473 ; perimeter
G1 X113.141 Y115.623 E0.00627 ; perimeter
G1 X113.070 Y115.494 E0.00684 ; perimeter
G1 X113.012 Y115.203 E0.01374 ; perimeter
G1 X112.986 Y115.168 E0.00202 ; perimeter
G1 X112.965 Y114.929 E0.01115 ; perimeter
G1 X112.512 Y114.707 E0.02334 ; perimeter
G1 X112.266 Y114.709 E0.01140 ; perimeter
G1 X112.083 Y114.675 E0.00864 ; perimeter
G1 X111.912 Y114.607 E0.00850 ; perimeter
G1 X111.705 Y114.467 E0.01159 ; perimeter
G1 X111.440 Y114.161 E0.01874 ; perimeter
G1 X111.315 Y113.980 E0.01022 ; perimeter
G1 X111.223 Y113.727 E0.01244 ; perimeter
G1 X111.277 Y113.339 E0.01815 ; perimeter
G1 X111.373 Y113.244 E0.00626 ; perimeter
G1 X111.562 Y113.139 E0.01003 ; perimeter
G1 X111.762 Y113.166 E0.00937 ; perimeter
G1 X111.864 Y113.218 E0.00531 ; perimeter
G1 X111.979 Y113.344 E0.00787 ; perimeter
G1 X112.149 Y113.628 E0.01535 ; perimeter
G1 X112.474 Y114.053 E0.02479 ; perimeter
G1 X112.618 Y114.358 E0.01562 ; perimeter
G1 X112.637 Y114.512 E0.00717 ; perimeter
G1 X112.740 Y114.800 E0.01419 ; perimeter
G1 X113.113 Y114.981 E0.01920 ; perimeter
G1 X113.475 Y114.971 E0.01674 ; perimeter
G1 X113.812 Y115.097 E0.01670 ; perimeter
G1 X113.945 Y115.192 E0.00757 ; perimeter
G1 X114.212 Y115.278 E0.01296 ; perimeter
G1 X114.343 Y115.267 E0.00611 ; perimeter
G1 X114.535 Y115.407 F10800.000 ; move inwards before travel
G1 X115.351 Y114.995 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.344983
G1 F2400.000
G1 X115.396 Y114.962 E0.00141 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.351 Y114.995 E-0.01477 ; wipe and retract
;WIPE_END
G1 E-2.38523 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X112.387 Y114.458 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.37895
G1 F2400.000
G1 X111.995 Y114.140 E0.01412 ; infill
G1 X111.789 Y113.886 E0.00912 ; infill
G1 X111.683 Y113.705 E0.00587 ; infill
G1 X111.545 Y113.420 F10800.000 ; move to first infill point
;WIDTH:0.323144
G1 F2400.000
G1 X111.637 Y113.535 E0.00343 ; infill
;WIDTH:0.36522
G1 X111.905 Y114.311 E0.02199 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.637 Y113.535 E-0.21654 ; wipe and retract
;WIPE_END
G1 E-2.18346 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X115.401 Y110.670 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.568 Y110.672 E0.00773 ; perimeter
G1 X115.777 Y110.758 E0.01044 ; perimeter
G1 X115.867 Y110.886 E0.00725 ; perimeter
G1 X115.898 Y111.095 E0.00977 ; perimeter
G1 X115.807 Y111.369 E0.01341 ; perimeter
G1 X115.721 Y111.446 E0.00535 ; perimeter
G1 X115.569 Y111.504 E0.00752 ; perimeter
G1 X115.488 Y111.519 E0.00381 ; perimeter
G1 X115.305 Y111.446 E0.00913 ; perimeter
G1 X115.162 Y111.257 E0.01096 ; perimeter
G1 X115.127 Y111.053 E0.00959 ; perimeter
G1 X115.143 Y110.941 E0.00525 ; perimeter
G1 X115.245 Y110.764 E0.00946 ; perimeter
G1 X115.350 Y110.701 E0.00565 ; perimeter
G1 X115.520 Y110.788 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.568 Y110.672 E-0.05814 ; wipe and retract
G1 X115.777 Y110.758 E-0.05950 ; wipe and retract
G1 X115.867 Y110.886 E-0.04133 ; wipe and retract
G1 X115.898 Y111.095 E-0.05568 ; wipe and retract
G1 X115.807 Y111.369 E-0.07637 ; wipe and retract
G1 X115.721 Y111.446 E-0.03048 ; wipe and retract
G1 X115.569 Y111.504 E-0.04286 ; wipe and retract
G1 X115.488 Y111.519 E-0.02168 ; wipe and retract
G1 X115.305 Y111.446 E-0.05202 ; wipe and retract
G1 X115.162 Y111.257 E-0.06245 ; wipe and retract
G1 X115.127 Y111.053 E-0.05465 ; wipe and retract
G1 X115.143 Y110.941 E-0.02991 ; wipe and retract
G1 X115.245 Y110.764 E-0.05391 ; wipe and retract
G1 X115.350 Y110.701 E-0.03216 ; wipe and retract
;WIPE_END
G1 E-1.72886 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X115.682 Y106.684 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.578 Y106.707 E0.00494 ; perimeter
G1 X115.373 Y106.692 E0.00952 ; perimeter
G1 X115.252 Y106.611 E0.00675 ; perimeter
G1 X115.198 Y106.526 E0.00464 ; perimeter
G1 X115.174 Y106.444 E0.00397 ; perimeter
G1 X115.161 Y106.128 E0.01464 ; perimeter
G1 X115.237 Y105.940 E0.00942 ; perimeter
G1 X115.288 Y105.887 E0.00338 ; perimeter
G1 X115.401 Y105.832 E0.00582 ; perimeter
G1 X115.607 Y105.829 E0.00957 ; perimeter
G1 X115.674 Y105.849 E0.00321 ; perimeter
G1 X115.742 Y105.891 E0.00371 ; perimeter
G1 X115.824 Y106.007 E0.00658 ; perimeter
G1 X115.871 Y106.192 E0.00884 ; perimeter
G1 X115.831 Y106.500 E0.01439 ; perimeter
G1 X115.725 Y106.642 E0.00823 ; perimeter
G1 X115.588 Y106.633 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.578 Y106.707 E-0.04242 ; wipe and retract
G1 X115.373 Y106.692 E-0.05421 ; wipe and retract
G1 X115.252 Y106.611 E-0.03843 ; wipe and retract
G1 X115.198 Y106.526 E-0.02645 ; wipe and retract
G1 X115.174 Y106.444 E-0.02260 ; wipe and retract
G1 X115.161 Y106.128 E-0.08342 ; wipe and retract
G1 X115.237 Y105.940 E-0.05366 ; wipe and retract
G1 X115.288 Y105.887 E-0.01926 ; wipe and retract
G1 X115.401 Y105.832 E-0.03313 ; wipe and retract
G1 X115.607 Y105.829 E-0.05453 ; wipe and retract
G1 X115.674 Y105.849 E-0.01829 ; wipe and retract
G1 X115.742 Y105.891 E-0.02113 ; wipe and retract
G1 X115.824 Y106.007 E-0.03750 ; wipe and retract
G1 X115.871 Y106.192 E-0.05037 ; wipe and retract
G1 X115.831 Y106.500 E-0.08197 ; wipe and retract
G1 X115.725 Y106.642 E-0.04688 ; wipe and retract
;WIPE_END
G1 E-1.71574 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X113.969 Y100.736 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.100 Y100.704 E0.00624 ; perimeter
G1 X114.307 Y100.720 E0.00963 ; perimeter
G1 X114.418 Y100.773 E0.00568 ; perimeter
G1 X114.600 Y100.950 E0.01175 ; perimeter
G1 X114.661 Y101.082 E0.00673 ; perimeter
G1 X114.672 Y101.236 E0.00717 ; perimeter
G1 X114.619 Y101.412 E0.00850 ; perimeter
G1 X114.508 Y101.526 E0.00741 ; perimeter
G1 X114.408 Y101.558 E0.00484 ; perimeter
G1 X114.206 Y101.543 E0.00941 ; perimeter
G1 X114.018 Y101.460 E0.00951 ; perimeter
G1 X113.942 Y101.403 E0.00438 ; perimeter
G1 X113.853 Y101.275 E0.00723 ; perimeter
G1 X113.805 Y101.145 E0.00639 ; perimeter
G1 X113.797 Y101.027 E0.00548 ; perimeter
G1 X113.841 Y100.870 E0.00758 ; perimeter
G1 X113.919 Y100.768 E0.00592 ; perimeter
G1 X114.084 Y100.806 F10800.000 ; move inwards before travel
G1 X114.222 Y101.125 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.338609
G1 F2400.000
G1 X114.200 Y101.099 E0.00083 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.222 Y101.125 E-0.00895 ; wipe and retract
;WIPE_END
G1 E-2.39105 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X111.959 Y97.560 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.792 Y97.629 E0.00837 ; perimeter
G1 X111.632 Y97.625 E0.00741 ; perimeter
G1 X111.430 Y97.523 E0.01049 ; perimeter
G1 X111.296 Y97.338 E0.01057 ; perimeter
G1 X111.233 Y97.096 E0.01159 ; perimeter
G1 X111.298 Y96.933 E0.00809 ; perimeter
G1 X111.303 Y96.859 E0.00347 ; perimeter
G1 X111.435 Y96.769 E0.00741 ; perimeter
G1 X111.486 Y96.754 E0.00246 ; perimeter
G1 X111.723 Y96.767 E0.01097 ; perimeter
G1 X111.832 Y96.815 E0.00556 ; perimeter
G1 X111.992 Y96.949 E0.00965 ; perimeter
G1 X112.031 Y97.014 E0.00351 ; perimeter
G1 X112.084 Y97.208 E0.00933 ; perimeter
G1 X112.035 Y97.464 E0.01205 ; perimeter
G1 X111.996 Y97.513 E0.00288 ; perimeter
G1 X111.791 Y97.493 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.792 Y97.629 E-0.06199 ; wipe and retract
G1 X111.632 Y97.625 E-0.04221 ; wipe and retract
G1 X111.430 Y97.523 E-0.05979 ; wipe and retract
G1 X111.296 Y97.338 E-0.06022 ; wipe and retract
G1 X111.233 Y97.096 E-0.06601 ; wipe and retract
G1 X111.298 Y96.933 E-0.04606 ; wipe and retract
G1 X111.303 Y96.859 E-0.01977 ; wipe and retract
G1 X111.435 Y96.769 E-0.04223 ; wipe and retract
G1 X111.486 Y96.754 E-0.01402 ; wipe and retract
G1 X111.723 Y96.767 E-0.06251 ; wipe and retract
G1 X111.832 Y96.815 E-0.03166 ; wipe and retract
G1 X111.992 Y96.949 E-0.05496 ; wipe and retract
G1 X112.031 Y97.014 E-0.01999 ; wipe and retract
G1 X112.084 Y97.208 E-0.05317 ; wipe and retract
G1 X112.035 Y97.464 E-0.06865 ; wipe and retract
G1 X111.996 Y97.513 E-0.01643 ; wipe and retract
;WIPE_END
G1 E-1.68032 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X109.285 Y95.630 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.970 Y95.661 E0.01468 ; perimeter
G1 X108.303 Y95.462 E0.03226 ; perimeter
G1 X108.074 Y95.341 E0.01197 ; perimeter
G1 X107.844 Y95.252 E0.01143 ; perimeter
G1 X107.476 Y95.174 E0.01744 ; perimeter
G1 X106.694 Y95.069 E0.03655 ; perimeter
G1 X106.117 Y94.927 E0.02751 ; perimeter
G1 X105.982 Y94.773 E0.00951 ; perimeter
G1 X105.955 Y94.586 E0.00874 ; perimeter
G1 X105.984 Y94.419 E0.00784 ; perimeter
G1 X106.019 Y94.364 E0.00304 ; perimeter
G1 X106.170 Y94.251 E0.00873 ; perimeter
G1 X106.428 Y94.218 E0.01206 ; perimeter
G1 X106.609 Y94.245 E0.00846 ; perimeter
G1 X108.441 Y94.747 E0.08797 ; perimeter
G1 X108.611 Y94.747 E0.00790 ; perimeter
G1 X108.951 Y94.826 E0.01616 ; perimeter
G1 X109.219 Y94.947 E0.01363 ; perimeter
G1 X109.387 Y95.099 E0.01051 ; perimeter
G1 X109.461 Y95.298 E0.00981 ; perimeter
G1 X109.414 Y95.520 E0.01051 ; perimeter
G1 X109.331 Y95.591 E0.00506 ; perimeter
G1 X109.028 Y95.446 F10800.000 ; move inwards before travel
G1 X109.205 Y95.340 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.30853
G1 F2400.000
G1 X108.815 Y95.204 E0.00914 ; infill
G1 X108.407 Y95.108 E0.00924 ; infill
;WIDTH:0.283851
G1 X108.377 Y95.099 E0.00063 ; infill
;WIDTH:0.272893
G1 X108.220 Y95.036 E0.00325 ; infill
;WIDTH:0.236057
G1 X107.943 Y94.944 E0.00468 ; infill
;WIDTH:0.204921
G1 X107.275 Y94.792 E0.00923 ; infill
;WIDTH:0.298573
G1 X106.528 Y94.627 E0.01625 ; infill
G1 X106.328 Y94.601 E0.00429 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.528 Y94.627 E-0.05330 ; wipe and retract
G1 X107.275 Y94.792 E-0.20177 ; wipe and retract
;WIPE_END
G1 E-2.14493 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X103.909 Y94.381 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.870 Y94.562 E0.00857 ; perimeter
G1 X103.731 Y94.710 E0.00939 ; perimeter
G1 X103.565 Y94.796 E0.00867 ; perimeter
G1 X103.355 Y94.811 E0.00973 ; perimeter
G1 X103.209 Y94.866 E0.00724 ; perimeter
G1 X102.925 Y94.880 E0.01319 ; perimeter
G1 X102.735 Y94.995 E0.01028 ; perimeter
G1 X102.511 Y95.038 E0.01055 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.476 Y95.044 E0.00149 ; perimeter (bridge)
G1 X102.310 Y95.185 E0.00909 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.025 Y95.495 E0.01953 ; perimeter
G1 X102.012 Y95.554 E0.00280 ; perimeter
G1 X101.853 Y95.709 E0.01029 ; perimeter
G1 X101.814 Y95.786 E0.00398 ; perimeter
G1 X101.768 Y95.829 E0.00295 ; perimeter
G1 X101.458 Y96.005 E0.01647 ; perimeter
G1 X101.320 Y96.039 E0.00659 ; perimeter
G1 X100.864 Y96.251 E0.02330 ; perimeter
G1 X100.549 Y96.636 E0.02306 ; perimeter
G1 X100.295 Y97.005 E0.02074 ; perimeter
G1 X100.309 Y97.271 E0.01232 ; perimeter
G1 X100.270 Y97.608 E0.01575 ; perimeter
G1 X100.187 Y97.835 E0.01118 ; perimeter
G1 X100.177 Y97.945 E0.00511 ; perimeter
G1 X100.077 Y98.047 E0.00663 ; perimeter
G1 X99.914 Y98.121 E0.00829 ; perimeter
G1 X99.839 Y98.117 E0.00348 ; perimeter
G1 X99.657 Y98.040 E0.00919 ; perimeter
G1 X99.470 Y97.821 E0.01331 ; perimeter
G1 X99.436 Y97.690 E0.00627 ; perimeter
G1 X99.504 Y97.419 E0.01296 ; perimeter
G1 X99.695 Y97.145 E0.01548 ; perimeter
G1 X99.912 Y96.965 E0.01305 ; perimeter
G1 X100.219 Y96.539 E0.02431 ; perimeter
G1 X100.521 Y96.010 E0.02824 ; perimeter
G1 X100.640 Y95.746 E0.01342 ; perimeter
G1 X100.843 Y95.476 E0.01563 ; perimeter
G1 X101.070 Y95.295 E0.01348 ; perimeter
G1 X101.347 Y95.172 E0.01403 ; perimeter
G1 X101.588 Y95.134 E0.01132 ; perimeter
G1 X102.167 Y95.112 E0.02681 ; perimeter
G1 X102.245 Y95.079 E0.00397 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.482 Y94.942 E0.01144 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.597 Y94.866 E0.00636 ; perimeter
G1 X102.802 Y94.682 E0.01278 ; perimeter
G1 X102.919 Y94.351 E0.01625 ; perimeter
G1 X103.005 Y94.280 E0.00515 ; perimeter
G1 X103.138 Y94.090 E0.01073 ; perimeter
G1 X103.267 Y94.022 E0.00676 ; perimeter
G1 X103.414 Y93.989 E0.00695 ; perimeter
G1 X103.608 Y94.016 E0.00908 ; perimeter
G1 X103.778 Y94.106 E0.00892 ; perimeter
G1 X103.881 Y94.267 E0.00887 ; perimeter
G1 X103.895 Y94.323 E0.00267 ; perimeter
G1 X103.749 Y94.474 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.870 Y94.562 E-0.06343 ; wipe and retract
G1 X103.731 Y94.710 E-0.05351 ; wipe and retract
G1 X103.565 Y94.796 E-0.04937 ; wipe and retract
G1 X103.355 Y94.811 E-0.05542 ; wipe and retract
G1 X103.209 Y94.866 E-0.04123 ; wipe and retract
G1 X102.925 Y94.880 E-0.07515 ; wipe and retract
G1 X102.735 Y94.995 E-0.05855 ; wipe and retract
G1 X102.511 Y95.038 E-0.06011 ; wipe and retract
;WIPE_END
G1 E-1.94323 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X101.803 Y95.377 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.25777
G1 F2400.000
G1 X101.459 Y95.552 E0.00690 ; infill
;WIDTH:0.363705
G1 X101.309 Y95.628 E0.00450 ; infill
G1 X100.933 Y95.757 E0.01059 ; infill
G1 X100.834 Y95.903 F10800.000 ; move to first infill point
;WIDTH:0.314367
G1 F2400.000
G1 X101.183 Y95.687 E0.00927 ; infill
;WIDTH:0.323532
G1 X101.759 Y95.369 E0.01537 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.183 Y95.687 E-0.17386 ; wipe and retract
;WIPE_END
G1 E-2.22614 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 X99.722 Y97.745 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.144683
G1 F2400.000
G1 X100.063 Y97.180 E0.00559 ; infill
G1 X100.019 Y97.189 F10800.000 ; move to first infill point
;WIDTH:0.293054
G1 F2400.000
G1 X99.790 Y97.825 E0.01405 ; infill
;LAYER_CHANGE
;Z:21.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;21.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.019 Y97.189 E-0.17826 ; wipe and retract
;WIPE_END
G1 E-2.22174 F2400.000 ; retract
G1 Z21.075 F10800.000 ; lift Z
G1 Z21.200 ; move to next layer (105)
;AFTER_LAYER_CHANGE
;21.2
G1 Z21.275 ; lift Z
G1 X100.417 Y101.190 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.481 Y101.314 E0.00649 ; perimeter
G1 X100.617 Y102.142 E0.03885 ; perimeter
G1 X100.640 Y102.575 E0.02011 ; perimeter
G1 X100.619 Y103.264 E0.03193 ; perimeter
G1 X100.815 Y103.551 E0.01609 ; perimeter
G1 X100.854 Y103.679 E0.00620 ; perimeter
G1 X101.043 Y104.030 E0.01845 ; perimeter
G1 X101.068 Y104.175 E0.00680 ; perimeter
G1 X101.343 Y104.916 E0.03664 ; perimeter
G1 X101.338 Y105.114 E0.00914 ; perimeter
G1 X101.366 Y105.234 E0.00574 ; perimeter
G1 X101.342 Y105.319 E0.00408 ; perimeter
G1 X101.235 Y105.481 E0.00899 ; perimeter
G1 X101.026 Y105.505 E0.00973 ; perimeter
G1 X100.829 Y105.491 E0.00917 ; perimeter
G1 X100.705 Y105.422 E0.00656 ; perimeter
G1 X100.579 Y105.240 E0.01026 ; perimeter
G1 X100.433 Y104.743 E0.02398 ; perimeter
G1 X100.280 Y104.110 E0.03017 ; perimeter
G1 X100.314 Y103.591 E0.02412 ; perimeter
G1 X100.294 Y103.494 E0.00457 ; perimeter
G1 X100.307 Y103.049 E0.02064 ; perimeter
G1 X100.017 Y102.608 E0.02442 ; perimeter
G1 X99.950 Y102.415 E0.00945 ; perimeter
G1 X99.826 Y102.236 E0.01010 ; perimeter
G1 X99.714 Y101.767 E0.02237 ; perimeter
G1 X99.731 Y101.468 E0.01388 ; perimeter
G1 X99.802 Y101.264 E0.01000 ; perimeter
G1 X99.875 Y101.218 E0.00399 ; perimeter
G1 X99.935 Y101.121 E0.00527 ; perimeter
G1 X100.190 Y101.038 E0.01239 ; perimeter
G1 X100.284 Y101.044 E0.00438 ; perimeter
G1 X100.376 Y101.145 E0.00633 ; perimeter
G1 X100.362 Y101.318 F10800.000 ; move inwards before travel
G1 X100.141 Y101.470 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325045
G1 F2400.000
G1 X100.126 Y101.511 E0.00104 ; infill
;WIDTH:0.333228
G1 X100.123 Y101.518 E0.00018 ; infill
;WIDTH:0.346707
G1 X100.120 Y101.545 E0.00069 ; infill
;WIDTH:0.388621
G1 X100.130 Y101.734 E0.00544 ; infill
G1 X100.295 Y102.591 E0.02509 ; infill
G1 X100.543 Y103.794 F10800.000 ; move to first infill point
;WIDTH:0.311343
G1 F2400.000
G1 X100.681 Y104.155 E0.00863 ; infill
G1 X100.709 Y104.285 E0.00296 ; infill
;WIDTH:0.355487
G1 X100.817 Y104.641 E0.00968 ; infill
;WIDTH:0.380785
G1 X100.931 Y104.984 E0.01017 ; infill
G1 X100.967 Y105.259 E0.00778 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.931 Y104.984 E-0.07312 ; wipe and retract
G1 X100.817 Y104.641 E-0.09551 ; wipe and retract
;WIPE_END
G1 E-2.23137 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X103.062 Y107.483 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.026 Y107.321 E0.00770 ; perimeter
G1 X103.045 Y107.144 E0.00823 ; perimeter
G1 X103.129 Y107.070 E0.00515 ; perimeter
G1 X103.221 Y107.056 E0.00435 ; perimeter
G1 X103.316 Y107.075 E0.00449 ; perimeter
G1 X103.593 Y107.166 E0.01347 ; perimeter
G1 X104.034 Y107.471 E0.02486 ; perimeter
G1 X104.147 Y107.610 E0.00826 ; perimeter
G1 X104.593 Y107.924 E0.02528 ; perimeter
G1 X104.979 Y108.073 E0.01916 ; perimeter
G1 X105.372 Y108.300 E0.02101 ; perimeter
G1 X105.577 Y108.510 E0.01363 ; perimeter
G1 X105.677 Y108.670 E0.00872 ; perimeter
G1 X105.693 Y108.747 E0.00366 ; perimeter
G1 X105.639 Y108.903 E0.00762 ; perimeter
G1 X105.559 Y108.951 E0.00432 ; perimeter
G1 X105.260 Y108.979 E0.01392 ; perimeter
G1 X104.886 Y108.914 E0.01758 ; perimeter
G1 X104.751 Y108.868 E0.00662 ; perimeter
G1 X104.398 Y108.684 E0.01842 ; perimeter
G1 X104.239 Y108.555 E0.00948 ; perimeter
G1 X103.748 Y108.238 E0.02707 ; perimeter
G1 X103.339 Y107.899 E0.02462 ; perimeter
G1 X103.090 Y107.536 E0.02037 ; perimeter
G1 X103.164 Y107.351 F10800.000 ; move inwards before travel
G1 X103.280 Y107.353 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.232031
G1 F2400.000
G1 X103.442 Y107.470 E0.00314 ; infill
;WIDTH:0.272492
G1 X103.528 Y107.555 E0.00231 ; infill
;WIDTH:0.290397
G1 X103.968 Y107.938 E0.01201 ; infill
G1 X104.459 Y108.264 E0.01212 ; infill
;WIDTH:0.318764
G1 X104.984 Y108.531 E0.01352 ; infill
G1 X105.400 Y108.682 E0.01015 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.984 Y108.531 E-0.11672 ; wipe and retract
G1 X104.459 Y108.264 E-0.15550 ; wipe and retract
;WIPE_END
G1 E-2.12778 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X108.909 Y110.752 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.950 Y110.679 E0.00386 ; perimeter
G1 X109.021 Y110.655 E0.00347 ; perimeter
G1 X109.271 Y110.628 E0.01166 ; perimeter
G1 X109.454 Y110.671 E0.00872 ; perimeter
G1 X109.718 Y110.879 E0.01554 ; perimeter
G1 X109.822 Y111.115 E0.01194 ; perimeter
G1 X109.803 Y111.240 E0.00586 ; perimeter
G1 X109.692 Y111.420 E0.00979 ; perimeter
G1 X109.619 Y111.469 E0.00407 ; perimeter
G1 X109.458 Y111.500 E0.00760 ; perimeter
G1 X109.297 Y111.485 E0.00747 ; perimeter
G1 X109.197 Y111.454 E0.00486 ; perimeter
G1 X109.001 Y111.347 E0.01037 ; perimeter
G1 X108.858 Y111.182 E0.01011 ; perimeter
G1 X108.823 Y111.085 E0.00479 ; perimeter
G1 X108.831 Y110.853 E0.01076 ; perimeter
G1 X108.866 Y110.794 E0.00317 ; perimeter
G1 X108.992 Y110.744 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.950 Y110.679 E-0.03743 ; wipe and retract
G1 X109.021 Y110.655 E-0.01979 ; wipe and retract
G1 X109.271 Y110.628 E-0.06644 ; wipe and retract
G1 X109.454 Y110.671 E-0.04966 ; wipe and retract
G1 X109.718 Y110.879 E-0.08856 ; wipe and retract
G1 X109.822 Y111.115 E-0.06804 ; wipe and retract
G1 X109.803 Y111.240 E-0.03339 ; wipe and retract
G1 X109.692 Y111.420 E-0.05576 ; wipe and retract
G1 X109.619 Y111.469 E-0.02320 ; wipe and retract
G1 X109.458 Y111.500 E-0.04332 ; wipe and retract
G1 X109.297 Y111.485 E-0.04256 ; wipe and retract
G1 X109.197 Y111.454 E-0.02771 ; wipe and retract
G1 X109.001 Y111.347 E-0.05906 ; wipe and retract
G1 X108.858 Y111.182 E-0.05757 ; wipe and retract
G1 X108.823 Y111.085 E-0.02726 ; wipe and retract
G1 X108.831 Y110.853 E-0.06132 ; wipe and retract
G1 X108.866 Y110.794 E-0.01805 ; wipe and retract
;WIPE_END
G1 E-1.62088 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X111.318 Y113.248 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.506 Y113.098 E0.01113 ; perimeter
G1 X111.614 Y113.068 E0.00520 ; perimeter
G1 X111.765 Y113.082 E0.00703 ; perimeter
G1 X111.899 Y113.154 E0.00703 ; perimeter
G1 X112.019 Y113.297 E0.00866 ; perimeter
G1 X112.158 Y113.565 E0.01401 ; perimeter
G1 X112.312 Y113.796 E0.01284 ; perimeter
G1 X112.668 Y114.224 E0.02578 ; perimeter
G1 X112.868 Y114.615 E0.02035 ; perimeter
G1 X113.164 Y114.875 E0.01823 ; perimeter
G1 X113.462 Y114.917 E0.01398 ; perimeter
G1 X113.760 Y115.048 E0.01506 ; perimeter
G1 X113.977 Y115.202 E0.01230 ; perimeter
G1 X114.199 Y115.273 E0.01083 ; perimeter
G1 X114.525 Y115.246 E0.01516 ; perimeter
G1 X115.099 Y114.667 E0.03775 ; perimeter
G1 X115.196 Y114.616 E0.00508 ; perimeter
G1 X115.318 Y114.589 E0.00581 ; perimeter
G1 X115.488 Y114.600 E0.00789 ; perimeter
G1 X115.593 Y114.647 E0.00533 ; perimeter
G1 X115.677 Y114.717 E0.00504 ; perimeter
G1 X115.738 Y114.803 E0.00492 ; perimeter
G1 X115.777 Y114.979 E0.00834 ; perimeter
G1 X115.736 Y115.168 E0.00892 ; perimeter
G1 X115.539 Y115.454 E0.01609 ; perimeter
G1 X115.345 Y115.662 E0.01316 ; perimeter
G1 X115.186 Y115.746 E0.00837 ; perimeter
G1 X115.058 Y115.765 E0.00599 ; perimeter
G1 X114.972 Y115.749 E0.00403 ; perimeter
G1 X114.300 Y115.503 E0.03315 ; perimeter
G1 X113.912 Y115.617 E0.01871 ; perimeter
G1 X113.746 Y115.712 E0.00887 ; perimeter
G1 X113.557 Y115.776 E0.00924 ; perimeter
G1 X113.312 Y115.741 E0.01148 ; perimeter
G1 X113.227 Y115.691 E0.00457 ; perimeter
G1 X113.127 Y115.592 E0.00650 ; perimeter
G1 X113.020 Y115.420 E0.00940 ; perimeter
G1 X112.985 Y115.244 E0.00828 ; perimeter
G1 X112.796 Y114.996 E0.01446 ; perimeter
G1 X112.494 Y114.828 E0.01600 ; perimeter
G1 X112.210 Y114.771 E0.01341 ; perimeter
G1 X112.035 Y114.695 E0.00883 ; perimeter
G1 X111.831 Y114.546 E0.01171 ; perimeter
G1 X111.624 Y114.309 E0.01460 ; perimeter
G1 X111.325 Y113.875 E0.02439 ; perimeter
G1 X111.250 Y113.643 E0.01131 ; perimeter
G1 X111.289 Y113.300 E0.01596 ; perimeter
G1 X111.558 Y113.265 F10800.000 ; move inwards before travel
G1 X111.583 Y113.345 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.422632
G1 F2400.000
G1 X111.723 Y113.679 E0.01143 ; infill
G1 X111.963 Y114.045 E0.01383 ; infill
;WIDTH:0.328101
G1 X112.241 Y114.338 E0.00956 ; infill
G1 X112.572 Y114.565 E0.00953 ; infill
G1 X111.912 Y114.272 F10800.000 ; move to first infill point
;WIDTH:0.387017
G1 F2400.000
G1 X111.658 Y113.481 E0.02375 ; infill
;WIDTH:0.349924
G1 X111.660 Y113.463 E0.00047 ; infill
;WIDTH:0.323739
G1 X111.662 Y113.445 E0.00043 ; infill
;WIDTH:0.297553
G1 X111.650 Y113.314 E0.00279 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.662 Y113.445 E-0.03473 ; wipe and retract
;WIPE_END
G1 E-2.36527 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X115.345 Y115.006 ; move to first infill point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.367707
G1 F2400.000
G1 X115.393 Y114.974 E0.00157 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.345 Y115.006 E-0.01530 ; wipe and retract
;WIPE_END
G1 E-2.38470 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X115.244 Y110.712 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.381 Y110.626 E0.00752 ; perimeter
G1 X115.550 Y110.610 E0.00786 ; perimeter
G1 X115.630 Y110.631 E0.00380 ; perimeter
G1 X115.770 Y110.706 E0.00739 ; perimeter
G1 X115.863 Y110.829 E0.00712 ; perimeter
G1 X115.901 Y111.023 E0.00918 ; perimeter
G1 X115.809 Y111.317 E0.01424 ; perimeter
G1 X115.721 Y111.396 E0.00547 ; perimeter
G1 X115.599 Y111.443 E0.00604 ; perimeter
G1 X115.435 Y111.447 E0.00762 ; perimeter
G1 X115.314 Y111.398 E0.00605 ; perimeter
G1 X115.164 Y111.224 E0.01066 ; perimeter
G1 X115.124 Y111.028 E0.00924 ; perimeter
G1 X115.145 Y110.884 E0.00674 ; perimeter
G1 X115.214 Y110.764 E0.00641 ; perimeter
G1 X115.400 Y110.756 F10800.000 ; move inwards before travel
G1 X115.514 Y110.994 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.321943
G1 F2400.000
G1 X115.509 Y111.050 E0.00131 ; infill
;WIDTH:0.307473
G1 X115.516 Y111.074 E0.00056 ; infill
;WIDTH:0.278274
G1 X115.521 Y111.100 E0.00052 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.516 Y111.074 E-0.00696 ; wipe and retract
;WIPE_END
G1 E-2.39304 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X115.486 Y106.822 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.435 Y106.822 E0.00237 ; perimeter
G1 X115.313 Y106.749 E0.00660 ; perimeter
G1 X115.227 Y106.661 E0.00570 ; perimeter
G1 X115.158 Y106.452 E0.01018 ; perimeter
G1 X115.157 Y106.205 E0.01141 ; perimeter
G1 X115.246 Y105.994 E0.01063 ; perimeter
G1 X115.284 Y105.956 E0.00248 ; perimeter
G1 X115.417 Y105.895 E0.00676 ; perimeter
G1 X115.540 Y105.892 E0.00568 ; perimeter
G1 X115.664 Y105.917 E0.00588 ; perimeter
G1 X115.731 Y105.952 E0.00349 ; perimeter
G1 X115.824 Y106.076 E0.00718 ; perimeter
G1 X115.876 Y106.242 E0.00808 ; perimeter
G1 X115.843 Y106.573 E0.01539 ; perimeter
G1 X115.778 Y106.688 E0.00613 ; perimeter
G1 X115.687 Y106.772 E0.00575 ; perimeter
G1 X115.544 Y106.807 E0.00682 ; perimeter
G1 X115.454 Y106.782 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.435 Y106.822 E-0.02912 ; wipe and retract
G1 X115.313 Y106.749 E-0.03759 ; wipe and retract
G1 X115.227 Y106.661 E-0.03247 ; wipe and retract
G1 X115.158 Y106.452 E-0.05798 ; wipe and retract
G1 X115.157 Y106.205 E-0.06502 ; wipe and retract
G1 X115.246 Y105.994 E-0.06055 ; wipe and retract
G1 X115.284 Y105.956 E-0.01413 ; wipe and retract
G1 X115.417 Y105.895 E-0.03854 ; wipe and retract
G1 X115.540 Y105.892 E-0.03235 ; wipe and retract
G1 X115.664 Y105.917 E-0.03351 ; wipe and retract
G1 X115.731 Y105.952 E-0.01986 ; wipe and retract
G1 X115.824 Y106.076 E-0.04093 ; wipe and retract
G1 X115.876 Y106.242 E-0.04603 ; wipe and retract
G1 X115.843 Y106.573 E-0.08766 ; wipe and retract
G1 X115.778 Y106.688 E-0.03493 ; wipe and retract
G1 X115.687 Y106.772 E-0.03275 ; wipe and retract
G1 X115.544 Y106.807 E-0.03885 ; wipe and retract
;WIPE_END
G1 E-1.69772 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X114.173 Y101.487 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.001 Y101.421 E0.00852 ; perimeter
G1 X113.877 Y101.329 E0.00714 ; perimeter
G1 X113.796 Y101.214 E0.00654 ; perimeter
G1 X113.750 Y101.093 E0.00599 ; perimeter
G1 X113.741 Y100.931 E0.00749 ; perimeter
G1 X113.782 Y100.789 E0.00687 ; perimeter
G1 X113.842 Y100.708 E0.00464 ; perimeter
G1 X113.911 Y100.663 E0.00382 ; perimeter
G1 X114.029 Y100.630 E0.00569 ; perimeter
G1 X114.244 Y100.648 E0.00998 ; perimeter
G1 X114.352 Y100.696 E0.00548 ; perimeter
G1 X114.542 Y100.881 E0.01230 ; perimeter
G1 X114.598 Y100.996 E0.00590 ; perimeter
G1 X114.613 Y101.145 E0.00694 ; perimeter
G1 X114.563 Y101.330 E0.00890 ; perimeter
G1 X114.516 Y101.400 E0.00387 ; perimeter
G1 X114.467 Y101.438 E0.00290 ; perimeter
G1 X114.323 Y101.491 E0.00711 ; perimeter
G1 X114.233 Y101.489 E0.00416 ; perimeter
G1 X114.113 Y101.314 F10800.000 ; move inwards before travel
G1 X114.137 Y101.026 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.335415
G1 F2400.000
G1 X114.229 Y101.103 E0.00292 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.137 Y101.026 E-0.03165 ; wipe and retract
;WIPE_END
G1 E-2.36835 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X111.199 Y96.773 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.380 Y96.678 E0.00949 ; perimeter
G1 X111.645 Y96.667 E0.01225 ; perimeter
G1 X111.785 Y96.735 E0.00723 ; perimeter
G1 X111.928 Y96.850 E0.00848 ; perimeter
G1 X112.006 Y96.971 E0.00668 ; perimeter
G1 X112.049 Y97.173 E0.00958 ; perimeter
G1 X112.022 Y97.357 E0.00861 ; perimeter
G1 X111.936 Y97.497 E0.00762 ; perimeter
G1 X111.737 Y97.566 E0.00973 ; perimeter
G1 X111.593 Y97.557 E0.00669 ; perimeter
G1 X111.370 Y97.441 E0.01167 ; perimeter
G1 X111.223 Y97.234 E0.01176 ; perimeter
G1 X111.180 Y96.990 E0.01149 ; perimeter
G1 X111.194 Y96.833 E0.00728 ; perimeter
G1 X111.400 Y96.811 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.380 Y96.678 E-0.06401 ; wipe and retract
G1 X111.645 Y96.667 E-0.06979 ; wipe and retract
G1 X111.785 Y96.735 E-0.04120 ; wipe and retract
G1 X111.928 Y96.850 E-0.04833 ; wipe and retract
G1 X112.006 Y96.971 E-0.03808 ; wipe and retract
G1 X112.049 Y97.173 E-0.05457 ; wipe and retract
G1 X112.022 Y97.357 E-0.04903 ; wipe and retract
G1 X111.936 Y97.497 E-0.04341 ; wipe and retract
G1 X111.737 Y97.566 E-0.05540 ; wipe and retract
G1 X111.593 Y97.557 E-0.03812 ; wipe and retract
G1 X111.370 Y97.441 E-0.06648 ; wipe and retract
G1 X111.223 Y97.234 E-0.06698 ; wipe and retract
G1 X111.180 Y96.990 E-0.06547 ; wipe and retract
G1 X111.194 Y96.833 E-0.04148 ; wipe and retract
;WIPE_END
G1 E-1.65765 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X109.452 Y95.678 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.150 Y95.723 E0.01413 ; perimeter
G1 X108.740 Y95.608 E0.01975 ; perimeter
G1 X108.495 Y95.445 E0.01363 ; perimeter
G1 X108.134 Y95.282 E0.01834 ; perimeter
G1 X107.847 Y95.124 E0.01517 ; perimeter
G1 X107.423 Y95.054 E0.01993 ; perimeter
G1 X107.234 Y95.071 E0.00879 ; perimeter
G1 X106.958 Y95.016 E0.01300 ; perimeter
G1 X106.838 Y95.047 E0.00573 ; perimeter
G1 X106.612 Y95.012 E0.01060 ; perimeter
G1 X106.478 Y95.022 E0.00624 ; perimeter
G1 X106.165 Y94.929 E0.01511 ; perimeter
G1 X106.033 Y94.768 E0.00964 ; perimeter
G1 X105.994 Y94.594 E0.00827 ; perimeter
G1 X106.072 Y94.397 E0.00980 ; perimeter
G1 X106.258 Y94.264 E0.01058 ; perimeter
G1 X106.439 Y94.234 E0.00853 ; perimeter
G1 X106.649 Y94.270 E0.00987 ; perimeter
G1 X107.037 Y94.389 E0.01881 ; perimeter
G1 X107.142 Y94.458 E0.00583 ; perimeter
G1 X107.930 Y94.737 E0.03869 ; perimeter
G1 X108.459 Y94.853 E0.02512 ; perimeter
G1 X108.625 Y94.816 E0.00786 ; perimeter
G1 X108.777 Y94.816 E0.00705 ; perimeter
G1 X109.034 Y94.860 E0.01207 ; perimeter
G1 X109.320 Y94.976 E0.01430 ; perimeter
G1 X109.456 Y95.067 E0.00758 ; perimeter
G1 X109.544 Y95.158 E0.00587 ; perimeter
G1 X109.617 Y95.383 E0.01096 ; perimeter
G1 X109.578 Y95.558 E0.00831 ; perimeter
G1 X109.495 Y95.636 E0.00528 ; perimeter
G1 X109.199 Y95.507 F10800.000 ; move inwards before travel
G1 X109.360 Y95.429 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341984
G1 F2400.000
G1 X108.924 Y95.247 E0.01174 ; infill
G1 X108.398 Y95.120 E0.01346 ; infill
G1 X108.399 Y95.117 F10800.000 ; move to first infill point
;WIDTH:0.235356
G1 F2400.000
G1 X108.662 Y95.152 E0.00424 ; infill
G1 X109.355 Y95.357 E0.01157 ; infill
G1 X109.367 Y95.395 F10800.000 ; move to first infill point
;WIDTH:0.285224
G1 F2400.000
G1 X108.481 Y95.095 E0.01886 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.367 Y95.395 E-0.24701 ; wipe and retract
;WIPE_END
G1 E-2.15299 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X106.250 Y94.633 ; move to first infill point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.246162
G1 F2400.000
G1 X106.353 Y94.617 E0.00176 ; infill
;WIDTH:0.270759
G1 X106.371 Y94.620 E0.00034 ; infill
;WIDTH:0.288334
G1 X106.640 Y94.648 E0.00552 ; infill
G1 X107.320 Y94.804 E0.01424 ; infill
G1 X107.321 Y94.800 F10800.000 ; move to first infill point
;WIDTH:0.116341
G1 F2400.000
G1 X106.933 Y94.697 E0.00245 ; infill
;WIDTH:0.221448
G1 X106.257 Y94.585 E0.01018 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.933 Y94.697 E-0.18089 ; wipe and retract
;WIPE_END
G1 E-2.21911 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 X100.188 Y97.178 ; move to first perimeter point
G1 Z21.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.183 Y97.342 E0.00762 ; perimeter
G1 X100.273 Y97.473 E0.00737 ; perimeter
G1 X100.237 Y97.925 E0.02099 ; perimeter
G1 X100.194 Y98.037 E0.00554 ; perimeter
G1 X100.066 Y98.152 E0.00795 ; perimeter
G1 X99.907 Y98.213 E0.00791 ; perimeter
G1 X99.788 Y98.206 E0.00551 ; perimeter
G1 X99.675 Y98.163 E0.00559 ; perimeter
G1 X99.485 Y97.909 E0.01466 ; perimeter
G1 X99.452 Y97.725 E0.00868 ; perimeter
G1 X99.503 Y97.510 E0.01021 ; perimeter
G1 X99.668 Y97.296 E0.01255 ; perimeter
G1 X99.845 Y97.155 E0.01048 ; perimeter
G1 X100.121 Y97.103 E0.01301 ; perimeter
G1 X100.148 Y97.133 E0.00186 ; perimeter
G1 X100.100 Y97.317 F10800.000 ; move inwards before travel
G1 X100.722 Y96.087 ; move to first perimeter point
G1 F1800.000
G1 X100.795 Y95.764 E0.01532 ; perimeter
G1 X100.873 Y95.585 E0.00905 ; perimeter
G1 X101.028 Y95.371 E0.01224 ; perimeter
G1 X101.226 Y95.222 E0.01147 ; perimeter
G1 X101.551 Y95.070 E0.01658 ; perimeter
G1 X101.917 Y94.996 E0.01733 ; perimeter
G1 X102.087 Y94.906 E0.00888 ; perimeter
G1 X102.443 Y94.771 E0.01767 ; perimeter
G1 X102.769 Y94.484 E0.02008 ; perimeter
G1 X102.878 Y94.345 E0.00822 ; perimeter
G1 X103.071 Y94.207 E0.01098 ; perimeter
G1 X103.137 Y94.113 E0.00531 ; perimeter
G1 X103.223 Y94.068 E0.00449 ; perimeter
G1 X103.419 Y94.013 E0.00944 ; perimeter
G1 X103.694 Y94.047 E0.01281 ; perimeter
G1 X103.836 Y94.144 E0.00798 ; perimeter
G1 X103.951 Y94.341 E0.01055 ; perimeter
G1 X103.921 Y94.563 E0.01037 ; perimeter
G1 X103.787 Y94.730 E0.00993 ; perimeter
G1 X103.574 Y94.835 E0.01100 ; perimeter
G1 X103.205 Y94.962 E0.01807 ; perimeter
G1 X103.105 Y94.967 E0.00463 ; perimeter
G1 X102.400 Y95.386 E0.03801 ; perimeter
G1 X102.002 Y95.721 E0.02406 ; perimeter
G1 X101.620 Y95.928 E0.02015 ; perimeter
G1 X101.290 Y96.008 E0.01571 ; perimeter
G1 X101.132 Y96.076 E0.00799 ; perimeter
G1 X100.777 Y96.108 E0.01649 ; perimeter
G1 X100.916 Y95.818 F10800.000 ; move inwards before travel
G1 X101.031 Y95.826 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.202679
G1 F2400.000
G1 X101.182 Y95.705 E0.00257 ; infill
;WIDTH:0.211422
G1 X101.775 Y95.271 E0.01030 ; infill
G1 X102.160 Y95.273 F10800.000 ; move to first infill point
;WIDTH:0.351077
G1 F2400.000
G1 X101.101 Y95.681 E0.02908 ; infill
G1 X102.700 Y94.898 F10800.000 ; move to first infill point
;WIDTH:0.126596
G1 F2400.000
G1 X102.841 Y94.796 E0.00121 ; infill
;WIDTH:0.156272
G1 X102.982 Y94.693 E0.00164 ; infill
;WIDTH:0.16488
G1 X103.002 Y94.676 E0.00027 ; infill
;WIDTH:0.185229
G1 X103.592 Y94.278 E0.00843 ; infill
G1 X103.552 Y94.414 F10800.000 ; move to first infill point
;WIDTH:0.337854
G1 F2400.000
G1 X102.918 Y94.674 E0.01681 ; infill
;LAYER_CHANGE
;Z:21.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;21.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.552 Y94.414 E-0.18084 ; wipe and retract
;WIPE_END
G1 E-2.21916 F2400.000 ; retract
G1 Z21.275 F10800.000 ; lift Z
G1 Z21.400 ; move to next layer (106)
;AFTER_LAYER_CHANGE
;21.4
G1 Z21.475 ; lift Z
G1 X104.485 Y108.018 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.892 Y108.068 E0.01897 ; perimeter
G1 X105.299 Y108.225 E0.02022 ; perimeter
G1 X105.663 Y108.444 E0.01967 ; perimeter
G1 X105.780 Y108.565 E0.00782 ; perimeter
G1 X105.937 Y108.774 E0.01209 ; perimeter
G1 X105.971 Y108.954 E0.00851 ; perimeter
G1 X105.927 Y109.020 E0.00369 ; perimeter
G1 X105.818 Y109.078 E0.00569 ; perimeter
G1 X105.494 Y109.100 E0.01505 ; perimeter
G1 X105.032 Y108.995 E0.02194 ; perimeter
G1 X104.680 Y108.817 E0.01826 ; perimeter
G1 X104.161 Y108.380 E0.03144 ; perimeter
G1 X103.521 Y108.027 E0.03386 ; perimeter
G1 X103.204 Y107.781 E0.01857 ; perimeter
G1 X103.000 Y107.542 E0.01459 ; perimeter
G1 X102.852 Y107.260 E0.01472 ; perimeter
G1 X102.820 Y107.126 E0.00637 ; perimeter
G1 X102.834 Y106.927 E0.00927 ; perimeter
G1 X102.910 Y106.873 E0.00432 ; perimeter
G1 X103.028 Y106.860 E0.00551 ; perimeter
G1 X103.162 Y106.890 E0.00638 ; perimeter
G1 X103.262 Y106.919 E0.00481 ; perimeter
G1 X103.583 Y107.099 E0.01705 ; perimeter
G1 X103.757 Y107.217 E0.00975 ; perimeter
G1 X103.898 Y107.346 E0.00885 ; perimeter
G1 X104.145 Y107.713 E0.02048 ; perimeter
G1 X104.342 Y107.841 E0.01092 ; perimeter
G1 X104.448 Y107.971 E0.00775 ; perimeter
G1 X104.564 Y108.410 F10800.000 ; move inwards before travel
G1 X104.518 Y108.265 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316636
G1 F2400.000
G1 X104.897 Y108.489 E0.01002 ; infill
G1 X105.667 Y108.816 E0.01903 ; infill
G1 X103.982 Y108.005 F10800.000 ; move to first infill point
;WIDTH:0.307497
G1 F2400.000
G1 X103.603 Y107.601 E0.01219 ; infill
G1 X103.077 Y107.163 E0.01505 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.603 Y107.601 E-0.18051 ; wipe and retract
G1 X103.982 Y108.005 E-0.14627 ; wipe and retract
;WIPE_END
G1 E-2.07322 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X101.400 Y105.403 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.256 Y105.533 E0.00899 ; perimeter
G1 X100.837 Y105.505 E0.01945 ; perimeter
G1 X100.705 Y105.395 E0.00796 ; perimeter
G1 X100.601 Y105.226 E0.00918 ; perimeter
G1 X100.400 Y104.484 E0.03561 ; perimeter
G1 X100.262 Y104.091 E0.01932 ; perimeter
G1 X100.203 Y103.790 E0.01421 ; perimeter
G1 X100.216 Y103.583 E0.00957 ; perimeter
G1 X100.107 Y103.005 E0.02727 ; perimeter
G1 X99.896 Y102.395 E0.02987 ; perimeter
G1 X99.779 Y101.903 E0.02344 ; perimeter
G1 X99.733 Y101.614 E0.01354 ; perimeter
G1 X99.749 Y101.328 E0.01328 ; perimeter
G1 X99.846 Y101.045 E0.01388 ; perimeter
G1 X99.938 Y100.888 E0.00843 ; perimeter
G1 X100.025 Y100.806 E0.00555 ; perimeter
G1 X100.121 Y100.756 E0.00502 ; perimeter
G1 X100.279 Y100.806 E0.00767 ; perimeter
G1 X100.418 Y100.985 E0.01051 ; perimeter
G1 X100.503 Y101.190 E0.01027 ; perimeter
G1 X100.597 Y101.708 E0.02436 ; perimeter
G1 X100.761 Y103.062 E0.06318 ; perimeter
G1 X100.925 Y103.682 E0.02972 ; perimeter
G1 X101.022 Y103.864 E0.00957 ; perimeter
G1 X101.069 Y104.132 E0.01259 ; perimeter
G1 X101.142 Y104.335 E0.00998 ; perimeter
G1 X101.177 Y104.510 E0.00829 ; perimeter
G1 X101.355 Y104.917 E0.02058 ; perimeter
G1 X101.411 Y105.175 E0.01224 ; perimeter
G1 X101.381 Y105.282 E0.00515 ; perimeter
G1 X101.390 Y105.344 E0.00289 ; perimeter
G1 X101.206 Y105.394 F10800.000 ; move inwards before travel
G1 X101.090 Y105.280 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.347194
G1 F2400.000
G1 X100.997 Y105.119 E0.00471 ; infill
G1 X100.897 Y104.839 E0.00754 ; infill
;WIDTH:0.336791
G1 X100.826 Y104.635 E0.00526 ; infill
;WIDTH:0.304897
G1 X100.587 Y103.831 E0.01828 ; infill
;WIDTH:0.297679
G1 X100.570 Y103.766 E0.00143 ; infill
;WIDTH:0.289909
G1 X100.561 Y103.670 E0.00197 ; infill
;WIDTH:0.258944
G1 X100.551 Y103.575 E0.00172 ; infill
;WIDTH:0.227978
G1 X100.451 Y103.126 E0.00707 ; infill
;WIDTH:0.191855
G1 X100.370 Y102.706 E0.00530 ; infill
;WIDTH:0.297992
G1 X100.231 Y102.054 E0.01414 ; infill
;WIDTH:0.397414
G1 X100.152 Y101.593 E0.01378 ; infill
G1 X100.119 Y101.055 E0.01589 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.152 Y101.593 E-0.14225 ; wipe and retract
G1 X100.231 Y102.054 E-0.12335 ; wipe and retract
;WIPE_END
G1 E-2.13440 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X99.923 Y98.365 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.827 Y98.359 E0.00445 ; perimeter
G1 X99.697 Y98.298 E0.00669 ; perimeter
G1 X99.509 Y98.038 E0.01483 ; perimeter
G1 X99.455 Y97.853 E0.00893 ; perimeter
G1 X99.487 Y97.645 E0.00973 ; perimeter
G1 X99.526 Y97.563 E0.00422 ; perimeter
G1 X99.668 Y97.393 E0.01028 ; perimeter
G1 X99.767 Y97.358 E0.00483 ; perimeter
G1 X99.827 Y97.310 E0.00357 ; perimeter
G1 X99.919 Y97.304 E0.00427 ; perimeter
G1 X100.162 Y97.418 E0.01241 ; perimeter
G1 X100.260 Y97.564 E0.00815 ; perimeter
G1 X100.304 Y97.809 E0.01153 ; perimeter
G1 X100.296 Y97.902 E0.00435 ; perimeter
G1 X100.207 Y98.136 E0.01161 ; perimeter
G1 X99.973 Y98.332 E0.01412 ; perimeter
G1 X99.856 Y98.297 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.827 Y98.359 E-0.03918 ; wipe and retract
G1 X99.697 Y98.298 E-0.03809 ; wipe and retract
G1 X99.509 Y98.038 E-0.08451 ; wipe and retract
G1 X99.455 Y97.853 E-0.05086 ; wipe and retract
G1 X99.487 Y97.645 E-0.05543 ; wipe and retract
G1 X99.526 Y97.563 E-0.02402 ; wipe and retract
G1 X99.668 Y97.393 E-0.05854 ; wipe and retract
G1 X99.767 Y97.358 E-0.02752 ; wipe and retract
G1 X99.827 Y97.310 E-0.02034 ; wipe and retract
G1 X99.919 Y97.304 E-0.02434 ; wipe and retract
G1 X100.162 Y97.418 E-0.07067 ; wipe and retract
G1 X100.260 Y97.564 E-0.04644 ; wipe and retract
G1 X100.304 Y97.809 E-0.06566 ; wipe and retract
G1 X100.296 Y97.902 E-0.02479 ; wipe and retract
G1 X100.207 Y98.136 E-0.06612 ; wipe and retract
G1 X99.973 Y98.332 E-0.08043 ; wipe and retract
;WIPE_END
G1 E-1.62306 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X101.190 Y95.907 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.041 Y95.808 E0.00827 ; perimeter
G1 X101.001 Y95.669 E0.00669 ; perimeter
G1 X101.086 Y95.452 E0.01079 ; perimeter
G1 X101.215 Y95.282 E0.00990 ; perimeter
G1 X101.321 Y95.202 E0.00615 ; perimeter
G1 X101.515 Y95.082 E0.01055 ; perimeter
G1 X101.826 Y94.947 E0.01572 ; perimeter
G1 X102.435 Y94.630 E0.03179 ; perimeter
G1 X103.086 Y94.163 E0.03713 ; perimeter
G1 X103.259 Y94.079 E0.00888 ; perimeter
G1 X103.455 Y94.033 E0.00935 ; perimeter
G1 X103.752 Y94.053 E0.01378 ; perimeter
G1 X103.936 Y94.173 E0.01019 ; perimeter
G1 X104.039 Y94.369 E0.01025 ; perimeter
G1 X104.044 Y94.598 E0.01061 ; perimeter
G1 X103.894 Y94.733 E0.00935 ; perimeter
G1 X103.603 Y94.883 E0.01513 ; perimeter
G1 X103.148 Y95.050 E0.02245 ; perimeter
G1 X102.664 Y95.316 E0.02561 ; perimeter
G1 X102.123 Y95.715 E0.03113 ; perimeter
G1 X101.805 Y95.882 E0.01662 ; perimeter
G1 X101.678 Y95.883 E0.00590 ; perimeter
G1 X101.459 Y95.935 E0.01042 ; perimeter
G1 X101.250 Y95.911 E0.00976 ; perimeter
G1 X101.164 Y95.730 F10800.000 ; move inwards before travel
G1 X101.328 Y95.675 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.386655
G1 F2400.000
G1 X101.993 Y95.312 E0.02167 ; infill
;WIDTH:0.273426
G1 X102.628 Y94.929 E0.01421 ; infill
;WIDTH:0.326902
G1 X102.999 Y94.696 E0.01034 ; infill
;WIDTH:0.373772
G1 X103.153 Y94.615 E0.00479 ; infill
;WIDTH:0.420643
G1 X103.307 Y94.534 E0.00546 ; infill
;WIDTH:0.428553
G1 X103.762 Y94.361 E0.01563 ; infill
G1 X102.398 Y95.213 F10800.000 ; move to first infill point
;WIDTH:0.371881
G1 F2400.000
G1 X101.612 Y95.490 E0.02279 ; infill
;WIDTH:0.355855
G1 X101.275 Y95.630 E0.00949 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.612 Y95.490 E-0.09627 ; wipe and retract
;WIPE_END
G1 E-2.30373 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X106.014 Y94.581 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.079 Y94.404 E0.00871 ; perimeter
G1 X106.277 Y94.280 E0.01085 ; perimeter
G1 X106.459 Y94.248 E0.00852 ; perimeter
G1 X106.800 Y94.329 E0.01628 ; perimeter
G1 X106.941 Y94.389 E0.00708 ; perimeter
G1 X107.104 Y94.567 E0.01115 ; perimeter
G1 X107.474 Y94.800 E0.02028 ; perimeter
G1 X107.490 Y94.836 E0.00183 ; perimeter
G1 X107.202 Y94.855 E0.01336 ; perimeter
G1 X107.155 Y94.921 E0.00374 ; perimeter
G1 X106.808 Y94.995 E0.01644 ; perimeter
G1 X106.744 Y94.985 E0.00298 ; perimeter
G1 X106.401 Y95.012 E0.01597 ; perimeter
G1 X106.186 Y94.941 E0.01048 ; perimeter
G1 X106.044 Y94.785 E0.00977 ; perimeter
G1 X106.023 Y94.640 E0.00677 ; perimeter
G1 X106.184 Y94.501 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.079 Y94.404 E-0.06396 ; wipe and retract
G1 X106.277 Y94.280 E-0.06182 ; wipe and retract
G1 X106.459 Y94.248 E-0.04855 ; wipe and retract
G1 X106.800 Y94.329 E-0.09273 ; wipe and retract
G1 X106.941 Y94.389 E-0.04035 ; wipe and retract
G1 X107.104 Y94.567 E-0.06353 ; wipe and retract
G1 X107.474 Y94.800 E-0.11554 ; wipe and retract
G1 X107.490 Y94.836 E-0.01040 ; wipe and retract
G1 X107.202 Y94.855 E-0.07613 ; wipe and retract
G1 X107.155 Y94.921 E-0.02129 ; wipe and retract
G1 X106.808 Y94.995 E-0.09365 ; wipe and retract
G1 X106.744 Y94.985 E-0.01697 ; wipe and retract
G1 X106.401 Y95.012 E-0.09099 ; wipe and retract
G1 X106.186 Y94.941 E-0.05973 ; wipe and retract
G1 X106.044 Y94.785 E-0.05567 ; wipe and retract
G1 X106.023 Y94.640 E-0.03857 ; wipe and retract
;WIPE_END
G1 E-1.45013 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X108.336 Y95.053 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.785 Y94.899 E0.02198 ; perimeter
G1 X108.932 Y94.887 E0.00681 ; perimeter
G1 X109.173 Y94.917 E0.01124 ; perimeter
G1 X109.423 Y95.005 E0.01229 ; perimeter
G1 X109.624 Y95.137 E0.01115 ; perimeter
G1 X109.703 Y95.218 E0.00524 ; perimeter
G1 X109.738 Y95.331 E0.00546 ; perimeter
G1 X109.813 Y95.456 E0.00677 ; perimeter
G1 X109.786 Y95.664 E0.00970 ; perimeter
G1 X109.709 Y95.727 E0.00460 ; perimeter
G1 X109.363 Y95.785 E0.01627 ; perimeter
G1 X109.167 Y95.763 E0.00916 ; perimeter
G1 X108.998 Y95.710 E0.00817 ; perimeter
G1 X108.852 Y95.637 E0.00758 ; perimeter
G1 X108.643 Y95.470 E0.01240 ; perimeter
G1 X108.606 Y95.322 E0.00702 ; perimeter
G1 X108.493 Y95.233 E0.00668 ; perimeter
G1 X108.489 Y95.151 E0.00381 ; perimeter
G1 X108.387 Y95.086 E0.00562 ; perimeter
G1 X108.736 Y95.079 F10800.000 ; move inwards before travel
G1 X108.788 Y95.153 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.10042
G1 F2400.000
G1 X108.842 Y95.165 E0.00026 ; infill
;WIDTH:0.121325
G1 X109.474 Y95.522 E0.00474 ; infill
G1 X109.484 Y95.339 F10800.000 ; move to first infill point
;WIDTH:0.247457
G1 F2400.000
G1 X109.384 Y95.414 E0.00212 ; infill
G1 X108.849 Y95.302 E0.00929 ; infill
G1 X108.831 Y95.231 F10800.000 ; move to first infill point
;WIDTH:0.362118
G1 F2400.000
G1 X109.243 Y95.367 E0.01151 ; infill
G1 X109.546 Y95.510 E0.00888 ; infill
G1 X109.552 Y95.509 F10800.000 ; move to first infill point
;WIDTH:0.190543
G1 F2400.000
G1 X108.858 Y95.135 E0.00968 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.552 Y95.509 E-0.20803 ; wipe and retract
;WIPE_END
G1 E-2.19197 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X106.886 Y94.732 ; move to first infill point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.195335
G1 F2400.000
G1 X106.749 Y94.659 E0.00196 ; infill
G1 X106.272 Y94.578 E0.00614 ; infill
G1 X106.270 Y94.583 F10800.000 ; move to first infill point
;WIDTH:0.222295
G1 F2400.000
G1 X106.321 Y94.606 E0.00084 ; infill
;WIDTH:0.254565
G1 X106.372 Y94.630 E0.00099 ; infill
;WIDTH:0.274218
G1 X106.387 Y94.632 E0.00029 ; infill
;WIDTH:0.281485
G1 X106.868 Y94.666 E0.00956 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.387 Y94.632 E-0.12714 ; wipe and retract
;WIPE_END
G1 E-2.27286 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X111.260 Y96.540 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.343 Y96.581 E0.00430 ; perimeter
G1 X111.562 Y96.570 E0.01015 ; perimeter
G1 X111.740 Y96.658 E0.00921 ; perimeter
G1 X111.889 Y96.780 E0.00890 ; perimeter
G1 X111.973 Y96.915 E0.00739 ; perimeter
G1 X112.009 Y97.180 E0.01238 ; perimeter
G1 X111.997 Y97.259 E0.00372 ; perimeter
G1 X111.925 Y97.418 E0.00808 ; perimeter
G1 X111.810 Y97.480 E0.00607 ; perimeter
G1 X111.685 Y97.505 E0.00587 ; perimeter
G1 X111.543 Y97.489 E0.00662 ; perimeter
G1 X111.308 Y97.359 E0.01243 ; perimeter
G1 X111.130 Y97.114 E0.01405 ; perimeter
G1 X111.100 Y96.904 E0.00983 ; perimeter
G1 X111.049 Y96.820 E0.00455 ; perimeter
G1 X111.091 Y96.579 E0.01133 ; perimeter
G1 X111.152 Y96.514 E0.00411 ; perimeter
G1 X111.201 Y96.526 E0.00233 ; perimeter
G1 X111.287 Y96.629 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.343 Y96.581 E-0.04009 ; wipe and retract
G1 X111.562 Y96.570 E-0.05784 ; wipe and retract
G1 X111.740 Y96.658 E-0.05246 ; wipe and retract
G1 X111.889 Y96.780 E-0.05069 ; wipe and retract
G1 X111.973 Y96.915 E-0.04208 ; wipe and retract
G1 X112.009 Y97.180 E-0.07053 ; wipe and retract
G1 X111.997 Y97.259 E-0.02119 ; wipe and retract
G1 X111.925 Y97.418 E-0.04603 ; wipe and retract
G1 X111.810 Y97.480 E-0.03455 ; wipe and retract
G1 X111.685 Y97.505 E-0.03345 ; wipe and retract
G1 X111.543 Y97.489 E-0.03769 ; wipe and retract
G1 X111.308 Y97.359 E-0.07083 ; wipe and retract
G1 X111.130 Y97.114 E-0.08007 ; wipe and retract
G1 X111.100 Y96.904 E-0.05602 ; wipe and retract
G1 X111.049 Y96.820 E-0.02594 ; wipe and retract
G1 X111.091 Y96.579 E-0.06455 ; wipe and retract
G1 X111.152 Y96.514 E-0.02341 ; wipe and retract
G1 X111.201 Y96.526 E-0.01330 ; wipe and retract
;WIPE_END
G1 E-1.57929 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X113.850 Y100.591 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.961 Y100.558 E0.00536 ; perimeter
G1 X114.168 Y100.574 E0.00960 ; perimeter
G1 X114.344 Y100.665 E0.00922 ; perimeter
G1 X114.480 Y100.805 E0.00900 ; perimeter
G1 X114.538 Y100.931 E0.00644 ; perimeter
G1 X114.552 Y101.064 E0.00623 ; perimeter
G1 X114.496 Y101.270 E0.00985 ; perimeter
G1 X114.453 Y101.333 E0.00353 ; perimeter
G1 X114.380 Y101.385 E0.00418 ; perimeter
G1 X114.255 Y101.423 E0.00606 ; perimeter
G1 X114.132 Y101.426 E0.00569 ; perimeter
G1 X113.948 Y101.356 E0.00913 ; perimeter
G1 X113.821 Y101.261 E0.00732 ; perimeter
G1 X113.697 Y101.045 E0.01156 ; perimeter
G1 X113.693 Y100.798 E0.01142 ; perimeter
G1 X113.720 Y100.717 E0.00398 ; perimeter
G1 X113.801 Y100.625 E0.00565 ; perimeter
G1 X113.949 Y100.652 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.961 Y100.558 E-0.04586 ; wipe and retract
G1 X114.168 Y100.574 E-0.05467 ; wipe and retract
G1 X114.344 Y100.665 E-0.05251 ; wipe and retract
G1 X114.480 Y100.805 E-0.05126 ; wipe and retract
G1 X114.538 Y100.931 E-0.03668 ; wipe and retract
G1 X114.552 Y101.064 E-0.03548 ; wipe and retract
G1 X114.496 Y101.270 E-0.05613 ; wipe and retract
G1 X114.453 Y101.333 E-0.02011 ; wipe and retract
G1 X114.380 Y101.385 E-0.02380 ; wipe and retract
G1 X114.255 Y101.423 E-0.03450 ; wipe and retract
G1 X114.132 Y101.426 E-0.03240 ; wipe and retract
G1 X113.948 Y101.356 E-0.05202 ; wipe and retract
G1 X113.821 Y101.261 E-0.04169 ; wipe and retract
G1 X113.697 Y101.045 E-0.06586 ; wipe and retract
G1 X113.693 Y100.798 E-0.06504 ; wipe and retract
G1 X113.720 Y100.717 E-0.02270 ; wipe and retract
G1 X113.801 Y100.625 E-0.03218 ; wipe and retract
;WIPE_END
G1 E-1.67711 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X115.231 Y106.081 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.290 Y106.019 E0.00398 ; perimeter
G1 X115.414 Y105.966 E0.00626 ; perimeter
G1 X115.667 Y105.980 E0.01172 ; perimeter
G1 X115.714 Y106.006 E0.00247 ; perimeter
G1 X115.826 Y106.142 E0.00817 ; perimeter
G1 X115.877 Y106.278 E0.00676 ; perimeter
G1 X115.861 Y106.617 E0.01569 ; perimeter
G1 X115.780 Y106.787 E0.00874 ; perimeter
G1 X115.646 Y106.919 E0.00872 ; perimeter
G1 X115.452 Y106.950 E0.00907 ; perimeter
G1 X115.290 Y106.889 E0.00804 ; perimeter
G1 X115.236 Y106.797 E0.00495 ; perimeter
G1 X115.142 Y106.469 E0.01582 ; perimeter
G1 X115.146 Y106.292 E0.00820 ; perimeter
G1 X115.208 Y106.137 E0.00773 ; perimeter
G1 X115.316 Y106.087 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.290 Y106.019 E-0.03781 ; wipe and retract
G1 X115.414 Y105.966 E-0.03567 ; wipe and retract
G1 X115.667 Y105.980 E-0.06679 ; wipe and retract
G1 X115.714 Y106.006 E-0.01409 ; wipe and retract
G1 X115.826 Y106.142 E-0.04656 ; wipe and retract
G1 X115.877 Y106.278 E-0.03849 ; wipe and retract
G1 X115.861 Y106.617 E-0.08936 ; wipe and retract
G1 X115.780 Y106.787 E-0.04978 ; wipe and retract
G1 X115.646 Y106.919 E-0.04970 ; wipe and retract
G1 X115.452 Y106.950 E-0.05166 ; wipe and retract
G1 X115.290 Y106.889 E-0.04580 ; wipe and retract
G1 X115.236 Y106.797 E-0.02820 ; wipe and retract
G1 X115.142 Y106.469 E-0.09013 ; wipe and retract
G1 X115.146 Y106.292 E-0.04671 ; wipe and retract
G1 X115.208 Y106.137 E-0.04402 ; wipe and retract
;WIPE_END
G1 E-1.66522 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X115.542 Y110.555 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.650 Y110.583 E0.00515 ; perimeter
G1 X115.780 Y110.662 E0.00705 ; perimeter
G1 X115.860 Y110.773 E0.00633 ; perimeter
G1 X115.900 Y110.975 E0.00955 ; perimeter
G1 X115.889 Y111.084 E0.00509 ; perimeter
G1 X115.821 Y111.255 E0.00851 ; perimeter
G1 X115.721 Y111.345 E0.00623 ; perimeter
G1 X115.616 Y111.386 E0.00524 ; perimeter
G1 X115.385 Y111.380 E0.01071 ; perimeter
G1 X115.234 Y111.297 E0.00795 ; perimeter
G1 X115.163 Y111.172 E0.00667 ; perimeter
G1 X115.123 Y110.983 E0.00896 ; perimeter
G1 X115.149 Y110.821 E0.00763 ; perimeter
G1 X115.240 Y110.663 E0.00846 ; perimeter
G1 X115.371 Y110.579 E0.00720 ; perimeter
G1 X115.483 Y110.563 E0.00521 ; perimeter
G1 X115.593 Y110.654 F10800.000 ; move inwards before travel
G1 X115.513 Y110.935 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.315209
G1 F2400.000
G1 X115.534 Y111.029 E0.00217 ; infill
;WIDTH:0.271455
G1 X115.549 Y111.049 E0.00048 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.534 Y111.029 E-0.00665 ; wipe and retract
;WIPE_END
G1 E-2.39335 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X115.735 Y114.811 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.773 Y114.981 E0.00805 ; perimeter
G1 X115.730 Y115.176 E0.00925 ; perimeter
G1 X115.560 Y115.426 E0.01402 ; perimeter
G1 X115.354 Y115.648 E0.01401 ; perimeter
G1 X115.201 Y115.722 E0.00788 ; perimeter
G1 X115.067 Y115.738 E0.00624 ; perimeter
G1 X114.775 Y115.647 E0.01421 ; perimeter
G1 X114.286 Y115.427 E0.02484 ; perimeter
G1 X113.883 Y115.578 E0.01993 ; perimeter
G1 X113.711 Y115.680 E0.00925 ; perimeter
G1 X113.563 Y115.730 E0.00727 ; perimeter
G1 X113.453 Y115.735 E0.00506 ; perimeter
G1 X113.305 Y115.707 E0.00702 ; perimeter
G1 X113.204 Y115.652 E0.00529 ; perimeter
G1 X113.089 Y115.536 E0.00758 ; perimeter
G1 X112.977 Y115.380 E0.00891 ; perimeter
G1 X112.958 Y115.286 E0.00445 ; perimeter
G1 X112.832 Y115.121 E0.00959 ; perimeter
G1 X112.601 Y114.961 E0.01303 ; perimeter
G1 X112.256 Y114.834 E0.01704 ; perimeter
G1 X111.963 Y114.627 E0.01662 ; perimeter
G1 X111.337 Y113.769 E0.04918 ; perimeter
G1 X111.263 Y113.483 E0.01371 ; perimeter
G1 X111.280 Y113.296 E0.00867 ; perimeter
G1 X111.353 Y113.161 E0.00711 ; perimeter
G1 X111.556 Y113.005 E0.01191 ; perimeter
G1 X111.628 Y112.986 E0.00342 ; perimeter
G1 X111.776 Y112.999 E0.00686 ; perimeter
G1 X111.923 Y113.073 E0.00765 ; perimeter
G1 X112.047 Y113.229 E0.00924 ; perimeter
G1 X112.166 Y113.504 E0.01387 ; perimeter
G1 X112.311 Y113.722 E0.01211 ; perimeter
G1 X112.378 Y113.882 E0.00808 ; perimeter
G1 X112.541 Y114.006 E0.00944 ; perimeter
G1 X112.725 Y114.200 E0.01239 ; perimeter
G1 X112.826 Y114.345 E0.00822 ; perimeter
G1 X112.951 Y114.460 E0.00786 ; perimeter
G1 X113.074 Y114.662 E0.01094 ; perimeter
G1 X113.276 Y114.839 E0.01243 ; perimeter
G1 X113.457 Y114.865 E0.00848 ; perimeter
G1 X113.614 Y114.936 E0.00800 ; perimeter
G1 X114.003 Y115.210 E0.02204 ; perimeter
G1 X114.166 Y115.262 E0.00793 ; perimeter
G1 X114.522 Y115.281 E0.01650 ; perimeter
G1 X114.981 Y114.774 E0.03169 ; perimeter
G1 X115.087 Y114.677 E0.00665 ; perimeter
G1 X115.190 Y114.623 E0.00541 ; perimeter
G1 X115.315 Y114.598 E0.00589 ; perimeter
G1 X115.483 Y114.608 E0.00783 ; perimeter
G1 X115.589 Y114.654 E0.00534 ; perimeter
G1 X115.700 Y114.762 E0.00719 ; perimeter
G1 X115.636 Y114.954 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.773 Y114.981 E-0.06075 ; wipe and retract
G1 X115.730 Y115.176 E-0.05267 ; wipe and retract
G1 X115.560 Y115.426 E-0.07987 ; wipe and retract
G1 X115.354 Y115.648 E-0.07982 ; wipe and retract
G1 X115.201 Y115.722 E-0.04489 ; wipe and retract
G1 X115.067 Y115.738 E-0.03555 ; wipe and retract
G1 X114.775 Y115.647 E-0.08095 ; wipe and retract
G1 X114.286 Y115.427 E-0.14153 ; wipe and retract
G1 X113.883 Y115.578 E-0.11354 ; wipe and retract
G1 X113.711 Y115.680 E-0.05267 ; wipe and retract
G1 X113.563 Y115.730 E-0.04142 ; wipe and retract
G1 X113.453 Y115.735 E-0.02882 ; wipe and retract
G1 X113.305 Y115.707 E-0.03999 ; wipe and retract
G1 X113.204 Y115.652 E-0.03013 ; wipe and retract
G1 X113.089 Y115.536 E-0.04317 ; wipe and retract
G1 X112.977 Y115.380 E-0.05079 ; wipe and retract
G1 X112.958 Y115.286 E-0.02532 ; wipe and retract
G1 X112.832 Y115.121 E-0.05464 ; wipe and retract
G1 X112.601 Y114.961 E-0.07421 ; wipe and retract
G1 X112.256 Y114.834 E-0.09707 ; wipe and retract
G1 X111.963 Y114.627 E-0.09468 ; wipe and retract
G1 X111.337 Y113.769 E-0.28017 ; wipe and retract
G1 X111.263 Y113.483 E-0.07809 ; wipe and retract
G1 X111.280 Y113.296 E-0.04937 ; wipe and retract
G1 X111.353 Y113.161 E-0.04050 ; wipe and retract
G1 X111.556 Y113.005 E-0.06784 ; wipe and retract
G1 X111.628 Y112.986 E-0.01946 ; wipe and retract
G1 X111.776 Y112.999 E-0.03908 ; wipe and retract
G1 X111.923 Y113.073 E-0.04360 ; wipe and retract
G1 X112.047 Y113.229 E-0.05265 ; wipe and retract
G1 X112.166 Y113.504 E-0.07904 ; wipe and retract
G1 X112.311 Y113.722 E-0.06898 ; wipe and retract
G1 X112.378 Y113.882 E-0.04604 ; wipe and retract
G1 X112.541 Y114.006 E-0.05378 ; wipe and retract
G1 X112.642 Y114.113 E-0.03889 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X112.695 Y114.739 ; move to first infill point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.363237
G1 F2400.000
G1 X112.093 Y114.150 E0.02241 ; infill
;WIDTH:0.332879
G1 X111.793 Y113.689 E0.01328 ; infill
G1 X111.732 Y113.583 E0.00295 ; infill
G1 X111.680 Y113.427 E0.00395 ; infill
G1 X111.528 Y113.344 E0.00418 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.680 Y113.427 E-0.04578 ; wipe and retract
G1 X111.732 Y113.583 E-0.04322 ; wipe and retract
G1 X111.793 Y113.689 E-0.03226 ; wipe and retract
G1 X112.093 Y114.150 E-0.14539 ; wipe and retract
;WIPE_END
G1 E-2.13336 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 X109.846 Y111.478 ; move to first perimeter point
G1 Z21.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.725 Y111.536 E0.00622 ; perimeter
G1 X109.494 Y111.556 E0.01072 ; perimeter
G1 X109.257 Y111.485 E0.01147 ; perimeter
G1 X109.056 Y111.353 E0.01114 ; perimeter
G1 X108.938 Y111.201 E0.00892 ; perimeter
G1 X108.879 Y111.078 E0.00633 ; perimeter
G1 X108.933 Y110.847 E0.01100 ; perimeter
G1 X109.005 Y110.722 E0.00666 ; perimeter
G1 X109.266 Y110.652 E0.01252 ; perimeter
G1 X109.549 Y110.707 E0.01336 ; perimeter
G1 X109.800 Y110.893 E0.01448 ; perimeter
G1 X109.910 Y111.036 E0.00835 ; perimeter
G1 X109.946 Y111.182 E0.00695 ; perimeter
G1 X109.931 Y111.303 E0.00567 ; perimeter
G1 X109.872 Y111.424 E0.00625 ; perimeter
G1 X109.719 Y111.434 F10800.000 ; move inwards before travel
G1 X109.591 Y111.206 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.254892
G1 F2400.000
G1 X109.594 Y111.207 E0.00006 ; infill
;LAYER_CHANGE
;Z:21.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;21.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.591 Y111.206 E-0.00087 ; wipe and retract
;WIPE_END
G1 E-2.39913 F2400.000 ; retract
G1 Z21.475 F10800.000 ; lift Z
G1 Z21.600 ; move to next layer (107)
;AFTER_LAYER_CHANGE
;21.6
G1 Z21.675 ; lift Z
G1 X104.380 Y108.124 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.841 Y108.157 E0.02144 ; perimeter
G1 X105.219 Y108.221 E0.01775 ; perimeter
G1 X105.652 Y108.391 E0.02155 ; perimeter
G1 X105.947 Y108.584 E0.01631 ; perimeter
G1 X106.179 Y108.842 E0.01610 ; perimeter
G1 X106.246 Y109.023 E0.00891 ; perimeter
G1 X106.174 Y109.154 E0.00692 ; perimeter
G1 X106.071 Y109.205 E0.00533 ; perimeter
G1 X105.721 Y109.221 E0.01625 ; perimeter
G1 X105.321 Y109.127 E0.01902 ; perimeter
G1 X104.954 Y108.947 E0.01896 ; perimeter
G1 X104.544 Y108.587 E0.02523 ; perimeter
G1 X104.251 Y108.211 E0.02209 ; perimeter
G1 X103.674 Y107.972 E0.02893 ; perimeter
G1 X103.596 Y107.958 E0.00364 ; perimeter
G1 X103.290 Y107.815 E0.01566 ; perimeter
G1 X102.987 Y107.583 E0.01767 ; perimeter
G1 X102.788 Y107.346 E0.01433 ; perimeter
G1 X102.618 Y106.995 E0.01808 ; perimeter
G1 X102.626 Y106.671 E0.01502 ; perimeter
G1 X102.862 Y106.669 E0.01094 ; perimeter
G1 X103.129 Y106.757 E0.01301 ; perimeter
G1 X103.516 Y106.991 E0.02095 ; perimeter
G1 X103.733 Y107.198 E0.01391 ; perimeter
G1 X103.972 Y107.547 E0.01958 ; perimeter
G1 X104.016 Y107.627 E0.00421 ; perimeter
G1 X104.026 Y107.730 E0.00478 ; perimeter
G1 X104.340 Y108.080 E0.02177 ; perimeter
G1 X104.445 Y108.519 F10800.000 ; move inwards before travel
G1 X104.729 Y108.421 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323443
G1 F2400.000
G1 X105.117 Y108.591 E0.00987 ; infill
;WIDTH:0.337577
G1 X105.160 Y108.615 E0.00122 ; infill
;WIDTH:0.363073
G1 X105.591 Y108.803 E0.01250 ; infill
;WIDTH:0.269917
G1 X105.909 Y108.971 E0.00680 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.591 Y108.803 E-0.09510 ; wipe and retract
;WIPE_END
G1 E-2.30490 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X103.712 Y107.734 ; move to first infill point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.326516
G1 F2400.000
G1 X103.440 Y107.448 E0.00931 ; infill
G1 X103.065 Y107.130 E0.01159 ; infill
;WIDTH:0.311609
G1 X102.870 Y106.963 E0.00573 ; infill
G1 X101.500 Y105.522 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.507 Y105.560 E0.00181 ; perimeter
G1 X101.457 Y105.579 E0.00247 ; perimeter
G1 X101.391 Y105.649 E0.00445 ; perimeter
G1 X101.014 Y105.596 E0.01764 ; perimeter
G1 X100.919 Y105.534 E0.00526 ; perimeter
G1 X100.854 Y105.526 E0.00303 ; perimeter
G1 X100.731 Y105.413 E0.00775 ; perimeter
G1 X100.620 Y105.210 E0.01070 ; perimeter
G1 X100.504 Y104.647 E0.02663 ; perimeter
G1 X100.430 Y104.416 E0.01124 ; perimeter
G1 X100.364 Y104.318 E0.00545 ; perimeter
G1 X100.228 Y103.958 E0.01782 ; perimeter
G1 X100.110 Y103.389 E0.02696 ; perimeter
G1 X100.061 Y103.011 E0.01763 ; perimeter
G1 X99.967 Y102.741 E0.01324 ; perimeter
G1 X99.747 Y101.392 E0.06330 ; perimeter
G1 X99.751 Y101.096 E0.01375 ; perimeter
G1 X99.815 Y100.844 E0.01202 ; perimeter
G1 X99.890 Y100.686 E0.00809 ; perimeter
G1 X99.982 Y100.628 E0.00502 ; perimeter
G1 X100.120 Y100.478 E0.00945 ; perimeter
G1 X100.173 Y100.473 E0.00248 ; perimeter
G1 X100.257 Y100.510 E0.00425 ; perimeter
G1 X100.326 Y100.652 E0.00732 ; perimeter
G1 X100.445 Y100.806 E0.00903 ; perimeter
G1 X100.517 Y101.023 E0.01057 ; perimeter
G1 X100.556 Y101.241 E0.01027 ; perimeter
G1 X100.575 Y101.784 E0.02516 ; perimeter
G1 X100.610 Y102.058 E0.01282 ; perimeter
G1 X100.753 Y102.711 E0.03097 ; perimeter
G1 X100.995 Y103.659 E0.04529 ; perimeter
G1 X101.039 Y103.939 E0.01313 ; perimeter
G1 X101.033 Y104.023 E0.00390 ; perimeter
G1 X101.107 Y104.419 E0.01866 ; perimeter
G1 X101.310 Y104.849 E0.02203 ; perimeter
G1 X101.424 Y104.998 E0.00870 ; perimeter
G1 X101.480 Y105.235 E0.01126 ; perimeter
G1 X101.517 Y105.287 E0.00296 ; perimeter
G1 X101.508 Y105.462 E0.00813 ; perimeter
G1 X101.469 Y105.546 F10800.000 ; move inwards before travel
G1 X101.040 Y105.150 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.355424
G1 F2400.000
G1 X100.985 Y105.066 E0.00262 ; infill
;WIDTH:0.339573
G1 X100.972 Y105.037 E0.00078 ; infill
;WIDTH:0.331449
G1 X100.943 Y104.958 E0.00203 ; infill
;WIDTH:0.317142
G1 X100.902 Y104.830 E0.00306 ; infill
;WIDTH:0.281876
G1 X100.862 Y104.702 E0.00266 ; infill
;WIDTH:0.24661
G1 X100.821 Y104.574 E0.00227 ; infill
;WIDTH:0.211343
G1 X100.803 Y104.528 E0.00070 ; infill
;WIDTH:0.204128
G1 X100.731 Y104.255 E0.00379 ; infill
G1 X100.645 Y103.955 F10800.000 ; move to first infill point
;WIDTH:0.366796
G1 F2400.000
G1 X100.501 Y103.323 E0.01747 ; infill
;WIDTH:0.353008
G1 X100.427 Y102.939 E0.01008 ; infill
;WIDTH:0.305489
G1 X100.344 Y102.648 E0.00661 ; infill
G1 X100.204 Y101.820 E0.01832 ; infill
G1 X100.142 Y101.148 E0.01475 ; infill
G1 X100.153 Y100.823 E0.00710 ; infill
G1 X100.149 Y100.818 F10800.000 ; move to first infill point
;WIDTH:0.235831
G1 F2400.000
G1 X100.053 Y101.710 E0.01439 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.149 Y100.818 E-0.23673 ; wipe and retract
;WIPE_END
G1 E-2.16327 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X99.900 Y98.553 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X99.710 Y98.464 E0.00971 ; perimeter
G1 X99.538 Y98.176 E0.01551 ; perimeter
G1 X99.466 Y97.988 E0.00936 ; perimeter
G1 X99.470 Y97.801 E0.00863 ; perimeter
G1 X99.510 Y97.686 E0.00565 ; perimeter
G1 X99.556 Y97.605 E0.00430 ; perimeter
G1 X99.718 Y97.424 E0.01128 ; perimeter
G1 X99.801 Y97.392 E0.00411 ; perimeter
G1 X100.006 Y97.408 E0.00954 ; perimeter
G1 X100.190 Y97.479 E0.00914 ; perimeter
G1 X100.322 Y97.621 E0.00896 ; perimeter
G1 X100.325 Y97.758 E0.00638 ; perimeter
G1 X100.353 Y97.890 E0.00624 ; perimeter
G1 X100.210 Y98.290 E0.01968 ; perimeter
G1 X100.027 Y98.533 E0.01410 ; perimeter
G1 X99.959 Y98.544 E0.00319 ; perimeter
G1 X99.805 Y98.365 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.710 Y98.464 E-0.06907 ; wipe and retract
G1 X99.538 Y98.176 E-0.08835 ; wipe and retract
G1 X99.466 Y97.988 E-0.05330 ; wipe and retract
G1 X99.470 Y97.801 E-0.04915 ; wipe and retract
G1 X99.510 Y97.686 E-0.03221 ; wipe and retract
G1 X99.556 Y97.605 E-0.02452 ; wipe and retract
G1 X99.718 Y97.424 E-0.06425 ; wipe and retract
G1 X99.801 Y97.392 E-0.02340 ; wipe and retract
G1 X100.006 Y97.408 E-0.05433 ; wipe and retract
G1 X100.190 Y97.479 E-0.05206 ; wipe and retract
G1 X100.322 Y97.621 E-0.05102 ; wipe and retract
G1 X100.325 Y97.758 E-0.03633 ; wipe and retract
G1 X100.353 Y97.890 E-0.03553 ; wipe and retract
G1 X100.210 Y98.290 E-0.11212 ; wipe and retract
G1 X100.027 Y98.533 E-0.08031 ; wipe and retract
G1 X99.959 Y98.544 E-0.01815 ; wipe and retract
;WIPE_END
G1 E-1.55588 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X101.361 Y95.819 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.286 Y95.756 E0.00455 ; perimeter
G1 X101.216 Y95.504 E0.01210 ; perimeter
G1 X101.223 Y95.440 E0.00302 ; perimeter
G1 X101.267 Y95.360 E0.00421 ; perimeter
G1 X101.393 Y95.205 E0.00926 ; perimeter
G1 X101.827 Y94.929 E0.02380 ; perimeter
G1 X102.093 Y94.799 E0.01373 ; perimeter
G1 X102.649 Y94.469 E0.02992 ; perimeter
G1 X102.823 Y94.345 E0.00992 ; perimeter
G1 X103.256 Y94.111 E0.02281 ; perimeter
G1 X103.627 Y94.045 E0.01742 ; perimeter
G1 X103.898 Y94.091 E0.01275 ; perimeter
G1 X104.074 Y94.211 E0.00988 ; perimeter
G1 X104.191 Y94.400 E0.01027 ; perimeter
G1 X104.193 Y94.642 E0.01121 ; perimeter
G1 X104.111 Y94.725 E0.00540 ; perimeter
G1 X103.707 Y94.905 E0.02048 ; perimeter
G1 X103.170 Y95.091 E0.02634 ; perimeter
G1 X102.661 Y95.343 E0.02630 ; perimeter
G1 X102.530 Y95.504 E0.00963 ; perimeter
G1 X102.233 Y95.715 E0.01687 ; perimeter
G1 X101.989 Y95.848 E0.01288 ; perimeter
G1 X101.635 Y95.875 E0.01644 ; perimeter
G1 X101.420 Y95.831 E0.01019 ; perimeter
G1 X101.357 Y95.721 F10800.000 ; move inwards before travel
G1 X101.543 Y95.610 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.439077
G1 F2400.000
G1 X102.240 Y95.195 E0.02673 ; infill
;WIDTH:0.324398
G1 X102.447 Y95.028 E0.00622 ; infill
;WIDTH:0.353097
G1 X102.871 Y94.797 E0.01244 ; infill
;WIDTH:0.377779
G1 X103.002 Y94.718 E0.00428 ; infill
;WIDTH:0.389321
G1 X103.042 Y94.697 E0.00130 ; infill
;WIDTH:0.421726
G1 X103.228 Y94.615 E0.00640 ; infill
;WIDTH:0.454131
G1 X103.532 Y94.500 E0.01111 ; infill
;WIDTH:0.361168
G1 X103.701 Y94.456 E0.00462 ; infill
G1 X103.939 Y94.451 E0.00630 ; infill
G1 X102.302 Y95.371 F10800.000 ; move to first infill point
;WIDTH:0.326577
G1 F2400.000
G1 X101.472 Y95.524 E0.01992 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.302 Y95.371 E-0.22287 ; wipe and retract
;WIPE_END
G1 E-2.17713 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X105.983 Y94.585 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.073 Y94.408 E0.00918 ; perimeter
G1 X106.246 Y94.288 E0.00976 ; perimeter
G1 X106.320 Y94.293 E0.00345 ; perimeter
G1 X106.480 Y94.262 E0.00752 ; perimeter
G1 X106.645 Y94.297 E0.00782 ; perimeter
G1 X106.833 Y94.386 E0.00964 ; perimeter
G1 X106.951 Y94.555 E0.00955 ; perimeter
G1 X107.024 Y94.733 E0.00895 ; perimeter
G1 X106.936 Y94.864 E0.00731 ; perimeter
G1 X106.797 Y94.901 E0.00665 ; perimeter
G1 X106.664 Y94.980 E0.00713 ; perimeter
G1 X106.325 Y95.008 E0.01577 ; perimeter
G1 X106.123 Y94.935 E0.00994 ; perimeter
G1 X106.040 Y94.823 E0.00648 ; perimeter
G1 X106.000 Y94.642 E0.00858 ; perimeter
G1 X106.170 Y94.519 F10800.000 ; move inwards before travel
G1 X106.338 Y94.622 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.239349
G1 F2400.000
G1 X106.355 Y94.632 E0.00033 ; infill
;WIDTH:0.257532
G1 X106.367 Y94.639 E0.00025 ; infill
;WIDTH:0.274612
G1 X106.378 Y94.646 E0.00024 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.367 Y94.639 E-0.00333 ; wipe and retract
;WIPE_END
G1 E-2.39667 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X109.121 Y94.951 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.305 Y94.971 E0.00855 ; perimeter
G1 X109.533 Y95.039 E0.01103 ; perimeter
G1 X109.785 Y95.197 E0.01378 ; perimeter
G1 X109.883 Y95.299 E0.00655 ; perimeter
G1 X110.044 Y95.601 E0.01585 ; perimeter
G1 X110.254 Y95.805 E0.01359 ; perimeter
G1 X110.276 Y95.879 E0.00355 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.323 Y96.037 E0.00691 ; perimeter (bridge)
G1 X110.653 Y96.120 E0.01420 ; perimeter (bridge)
G1 X110.771 Y96.190 E0.00573 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.851 Y96.236 E0.00428 ; perimeter
G1 X111.082 Y96.275 E0.01084 ; perimeter
G1 X111.693 Y96.580 E0.03164 ; perimeter
G1 X111.833 Y96.697 E0.00849 ; perimeter
G1 X111.931 Y96.845 E0.00819 ; perimeter
G1 X111.964 Y96.935 E0.00445 ; perimeter
G1 X111.964 Y97.182 E0.01144 ; perimeter
G1 X111.894 Y97.352 E0.00851 ; perimeter
G1 X111.780 Y97.434 E0.00650 ; perimeter
G1 X111.634 Y97.445 E0.00678 ; perimeter
G1 X111.437 Y97.416 E0.00924 ; perimeter
G1 X111.244 Y97.288 E0.01074 ; perimeter
G1 X111.035 Y96.993 E0.01673 ; perimeter
G1 X111.030 Y96.956 E0.00174 ; perimeter
G1 X110.630 Y96.294 E0.03584 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.597 Y96.239 E0.00268 ; perimeter (bridge)
G1 X110.307 Y96.028 E0.01497 ; perimeter (bridge)
G1 X110.236 Y95.941 E0.00469 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.164 Y95.853 E0.00526 ; perimeter
G1 X110.000 Y95.899 E0.00787 ; perimeter
G1 X109.745 Y95.862 E0.01196 ; perimeter
G1 X109.662 Y95.876 E0.00389 ; perimeter
G1 X109.272 Y95.814 E0.01833 ; perimeter
G1 X109.033 Y95.704 E0.01216 ; perimeter
G1 X108.791 Y95.464 E0.01578 ; perimeter
G1 X108.743 Y95.279 E0.00884 ; perimeter
G1 X108.777 Y95.085 E0.00911 ; perimeter
G1 X108.994 Y94.973 E0.01132 ; perimeter
G1 X109.062 Y94.962 E0.00321 ; perimeter
G1 X109.222 Y95.106 F10800.000 ; move inwards before travel
G1 X109.053 Y95.225 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.297542
G1 F2400.000
G1 X109.770 Y95.600 E0.01711 ; infill
G1 X111.167 Y96.587 F10800.000 ; move to first infill point
;WIDTH:0.365795
G1 F2400.000
G1 X111.562 Y97.016 E0.01566 ; infill
G1 X111.661 Y97.201 E0.00564 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.562 Y97.016 E-0.05547 ; wipe and retract
G1 X111.167 Y96.587 E-0.15394 ; wipe and retract
;WIPE_END
G1 E-2.19059 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X113.789 Y100.520 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.893 Y100.487 E0.00504 ; perimeter
G1 X114.009 Y100.488 E0.00536 ; perimeter
G1 X114.141 Y100.518 E0.00629 ; perimeter
G1 X114.334 Y100.633 E0.01040 ; perimeter
G1 X114.416 Y100.725 E0.00572 ; perimeter
G1 X114.475 Y100.857 E0.00670 ; perimeter
G1 X114.485 Y101.054 E0.00911 ; perimeter
G1 X114.460 Y101.156 E0.00487 ; perimeter
G1 X114.400 Y101.253 E0.00530 ; perimeter
G1 X114.315 Y101.316 E0.00489 ; perimeter
G1 X114.191 Y101.351 E0.00595 ; perimeter
G1 X114.069 Y101.350 E0.00568 ; perimeter
G1 X113.877 Y101.279 E0.00949 ; perimeter
G1 X113.766 Y101.195 E0.00644 ; perimeter
G1 X113.639 Y100.964 E0.01220 ; perimeter
G1 X113.629 Y100.737 E0.01055 ; perimeter
G1 X113.656 Y100.656 E0.00395 ; perimeter
G1 X113.740 Y100.554 E0.00613 ; perimeter
G1 X113.883 Y100.575 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.893 Y100.487 E-0.04405 ; wipe and retract
G1 X114.009 Y100.488 E-0.03053 ; wipe and retract
G1 X114.141 Y100.518 E-0.03584 ; wipe and retract
G1 X114.334 Y100.633 E-0.05922 ; wipe and retract
G1 X114.416 Y100.725 E-0.03258 ; wipe and retract
G1 X114.475 Y100.857 E-0.03816 ; wipe and retract
G1 X114.485 Y101.054 E-0.05188 ; wipe and retract
G1 X114.460 Y101.156 E-0.02776 ; wipe and retract
G1 X114.400 Y101.253 E-0.03019 ; wipe and retract
G1 X114.315 Y101.316 E-0.02785 ; wipe and retract
G1 X114.191 Y101.351 E-0.03392 ; wipe and retract
G1 X114.069 Y101.350 E-0.03233 ; wipe and retract
G1 X113.877 Y101.279 E-0.05407 ; wipe and retract
G1 X113.766 Y101.195 E-0.03668 ; wipe and retract
G1 X113.639 Y100.964 E-0.06947 ; wipe and retract
G1 X113.629 Y100.737 E-0.06011 ; wipe and retract
G1 X113.656 Y100.656 E-0.02248 ; wipe and retract
G1 X113.740 Y100.554 E-0.03492 ; wipe and retract
;WIPE_END
G1 E-1.67795 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X115.189 Y106.201 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.296 Y106.077 E0.00758 ; perimeter
G1 X115.444 Y106.023 E0.00731 ; perimeter
G1 X115.633 Y106.024 E0.00874 ; perimeter
G1 X115.727 Y106.071 E0.00486 ; perimeter
G1 X115.827 Y106.179 E0.00684 ; perimeter
G1 X115.881 Y106.314 E0.00675 ; perimeter
G1 X115.874 Y106.670 E0.01649 ; perimeter
G1 X115.775 Y106.974 E0.01479 ; perimeter
G1 X115.619 Y107.216 E0.01336 ; perimeter
G1 X115.504 Y107.294 E0.00643 ; perimeter
G1 X115.446 Y107.258 E0.00316 ; perimeter
G1 X115.354 Y107.074 E0.00952 ; perimeter
G1 X115.277 Y107.046 E0.00381 ; perimeter
G1 X115.196 Y106.830 E0.01070 ; perimeter
G1 X115.186 Y106.687 E0.00663 ; perimeter
G1 X115.124 Y106.475 E0.01026 ; perimeter
G1 X115.127 Y106.366 E0.00502 ; perimeter
G1 X115.159 Y106.253 E0.00546 ; perimeter
G1 X115.352 Y106.206 F10800.000 ; move inwards before travel
G1 X115.505 Y106.415 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318976
G1 F2400.000
G1 X115.512 Y106.395 E0.00051 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.505 Y106.415 E-0.00582 ; wipe and retract
;WIPE_END
G1 E-2.39418 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X115.554 Y110.508 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.667 Y110.535 E0.00537 ; perimeter
G1 X115.783 Y110.614 E0.00654 ; perimeter
G1 X115.859 Y110.726 E0.00625 ; perimeter
G1 X115.899 Y110.921 E0.00923 ; perimeter
G1 X115.873 Y111.102 E0.00848 ; perimeter
G1 X115.821 Y111.206 E0.00538 ; perimeter
G1 X115.721 Y111.294 E0.00615 ; perimeter
G1 X115.621 Y111.334 E0.00501 ; perimeter
G1 X115.407 Y111.334 E0.00989 ; perimeter
G1 X115.244 Y111.254 E0.00841 ; perimeter
G1 X115.162 Y111.119 E0.00733 ; perimeter
G1 X115.124 Y110.932 E0.00883 ; perimeter
G1 X115.153 Y110.757 E0.00825 ; perimeter
G1 X115.236 Y110.614 E0.00765 ; perimeter
G1 X115.356 Y110.538 E0.00658 ; perimeter
G1 X115.494 Y110.517 E0.00647 ; perimeter
G1 X115.607 Y110.611 F10800.000 ; move inwards before travel
G1 X115.531 Y110.865 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.285478
G1 F2400.000
G1 X115.510 Y110.894 E0.00071 ; infill
G1 X115.531 Y110.978 E0.00174 ; infill
;WIDTH:0.273563
G1 X115.548 Y110.998 E0.00051 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.531 Y110.978 E-0.00697 ; wipe and retract
;WIPE_END
G1 E-2.39303 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X115.769 Y114.987 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.736 Y115.148 E0.00758 ; perimeter
G1 X115.577 Y115.400 E0.01381 ; perimeter
G1 X115.355 Y115.637 E0.01505 ; perimeter
G1 X115.213 Y115.700 E0.00722 ; perimeter
G1 X115.084 Y115.716 E0.00601 ; perimeter
G1 X114.831 Y115.638 E0.01228 ; perimeter
G1 X114.640 Y115.524 E0.01029 ; perimeter
G1 X114.263 Y115.357 E0.01908 ; perimeter
G1 X113.607 Y115.671 E0.03372 ; perimeter
G1 X113.441 Y115.695 E0.00774 ; perimeter
G1 X113.298 Y115.671 E0.00674 ; perimeter
G1 X113.181 Y115.612 E0.00604 ; perimeter
G1 X113.064 Y115.495 E0.00767 ; perimeter
G1 X112.855 Y115.229 E0.01566 ; perimeter
G1 X112.105 Y114.725 E0.04187 ; perimeter
G1 X111.764 Y114.226 E0.02799 ; perimeter
G1 X111.605 Y113.930 E0.01555 ; perimeter
G1 X111.489 Y113.838 E0.00687 ; perimeter
G1 X111.345 Y113.657 E0.01071 ; perimeter
G1 X111.276 Y113.351 E0.01452 ; perimeter
G1 X111.286 Y113.255 E0.00448 ; perimeter
G1 X111.406 Y113.029 E0.01184 ; perimeter
G1 X111.579 Y112.915 E0.00962 ; perimeter
G1 X111.770 Y112.915 E0.00885 ; perimeter
G1 X111.928 Y112.981 E0.00792 ; perimeter
G1 X112.057 Y113.129 E0.00911 ; perimeter
G1 X112.143 Y113.370 E0.01184 ; perimeter
G1 X112.377 Y113.886 E0.02623 ; perimeter
G1 X112.756 Y114.175 E0.02210 ; perimeter
G1 X112.914 Y114.360 E0.01126 ; perimeter
G1 X113.334 Y114.763 E0.02698 ; perimeter
G1 X113.703 Y114.957 E0.01930 ; perimeter
G1 X114.049 Y115.233 E0.02050 ; perimeter
G1 X114.548 Y115.315 E0.02342 ; perimeter
G1 X114.694 Y115.089 E0.01249 ; perimeter
G1 X114.962 Y114.794 E0.01845 ; perimeter
G1 X115.081 Y114.684 E0.00750 ; perimeter
G1 X115.185 Y114.629 E0.00543 ; perimeter
G1 X115.311 Y114.607 E0.00597 ; perimeter
G1 X115.479 Y114.615 E0.00776 ; perimeter
G1 X115.585 Y114.660 E0.00534 ; perimeter
G1 X115.667 Y114.729 E0.00494 ; perimeter
G1 X115.730 Y114.816 E0.00498 ; perimeter
G1 X115.763 Y114.928 E0.00541 ; perimeter
G1 X115.626 Y115.068 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.736 Y115.148 E-0.05848 ; wipe and retract
G1 X115.577 Y115.400 E-0.07867 ; wipe and retract
G1 X115.355 Y115.637 E-0.08572 ; wipe and retract
G1 X115.213 Y115.700 E-0.04115 ; wipe and retract
G1 X115.084 Y115.716 E-0.03424 ; wipe and retract
G1 X114.831 Y115.638 E-0.06995 ; wipe and retract
G1 X114.640 Y115.524 E-0.05862 ; wipe and retract
G1 X114.263 Y115.357 E-0.10872 ; wipe and retract
G1 X113.607 Y115.671 E-0.19208 ; wipe and retract
G1 X113.441 Y115.695 E-0.04410 ; wipe and retract
G1 X113.298 Y115.671 E-0.03842 ; wipe and retract
G1 X113.181 Y115.612 E-0.03443 ; wipe and retract
G1 X113.064 Y115.495 E-0.04371 ; wipe and retract
G1 X112.855 Y115.229 E-0.08920 ; wipe and retract
G1 X112.105 Y114.725 E-0.23851 ; wipe and retract
G1 X111.764 Y114.226 E-0.15945 ; wipe and retract
G1 X111.605 Y113.930 E-0.08859 ; wipe and retract
G1 X111.489 Y113.838 E-0.03915 ; wipe and retract
G1 X111.345 Y113.657 E-0.06102 ; wipe and retract
G1 X111.276 Y113.351 E-0.08273 ; wipe and retract
G1 X111.286 Y113.255 E-0.02550 ; wipe and retract
G1 X111.406 Y113.029 E-0.06744 ; wipe and retract
G1 X111.579 Y112.915 E-0.05483 ; wipe and retract
G1 X111.770 Y112.915 E-0.05039 ; wipe and retract
G1 X111.928 Y112.981 E-0.04511 ; wipe and retract
G1 X112.057 Y113.129 E-0.05188 ; wipe and retract
G1 X112.143 Y113.370 E-0.06743 ; wipe and retract
G1 X112.377 Y113.886 E-0.14945 ; wipe and retract
G1 X112.741 Y114.164 E-0.12100 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X113.550 Y115.436 ; move to first infill point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.240904
G1 F2400.000
G1 X113.126 Y115.030 E0.00967 ; infill
;WIDTH:0.233206
G1 X112.784 Y114.743 E0.00706 ; infill
;WIDTH:0.32753
G1 X112.415 Y114.440 E0.01129 ; infill
G1 X112.217 Y114.230 E0.00683 ; infill
;WIDTH:0.302768
G1 X112.117 Y114.126 E0.00312 ; infill
;WIDTH:0.256768
G1 X111.901 Y113.714 E0.00827 ; infill
G1 X111.578 Y113.203 E0.01076 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.901 Y113.714 E-0.15963 ; wipe and retract
G1 X112.117 Y114.126 E-0.12270 ; wipe and retract
;WIPE_END
G1 E-2.11767 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 X109.989 Y111.576 ; move to first perimeter point
G1 Z21.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.917 Y111.611 E0.00370 ; perimeter
G1 X109.671 Y111.622 E0.01141 ; perimeter
G1 X109.308 Y111.511 E0.01757 ; perimeter
G1 X109.111 Y111.364 E0.01144 ; perimeter
G1 X108.954 Y111.180 E0.01119 ; perimeter
G1 X108.904 Y111.053 E0.00634 ; perimeter
G1 X108.933 Y110.903 E0.00705 ; perimeter
G1 X109.039 Y110.770 E0.00791 ; perimeter
G1 X109.291 Y110.678 E0.01243 ; perimeter
G1 X109.629 Y110.737 E0.01588 ; perimeter
G1 X109.912 Y110.931 E0.01589 ; perimeter
G1 X110.047 Y111.081 E0.00934 ; perimeter
G1 X110.086 Y111.279 E0.00935 ; perimeter
G1 X110.110 Y111.317 E0.00208 ; perimeter
G1 X110.105 Y111.463 E0.00678 ; perimeter
G1 X110.029 Y111.532 E0.00479 ; perimeter
G1 X109.915 Y111.547 F10800.000 ; move inwards before travel
G1 X109.236 Y110.955 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.350496
G1 F2400.000
G1 X109.496 Y111.141 E0.00818 ; infill
G1 X109.846 Y111.310 E0.00995 ; infill
;LAYER_CHANGE
;Z:21.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;21.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.496 Y111.141 E-0.10266 ; wipe and retract
G1 X109.236 Y110.955 E-0.08445 ; wipe and retract
;WIPE_END
G1 E-2.21289 F2400.000 ; retract
G1 Z21.675 F10800.000 ; lift Z
G1 Z21.800 ; move to next layer (108)
;AFTER_LAYER_CHANGE
;21.8
G1 Z21.875 ; lift Z
G1 X103.825 Y107.693 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.774 Y107.773 E0.00442 ; perimeter
G1 X103.490 Y107.780 E0.01316 ; perimeter
G1 X103.091 Y107.635 E0.01964 ; perimeter
G1 X102.773 Y107.386 E0.01872 ; perimeter
G1 X102.563 Y107.134 E0.01522 ; perimeter
G1 X102.479 Y106.954 E0.00917 ; perimeter
G1 X102.192 Y106.563 E0.02247 ; perimeter
G1 X102.099 Y106.307 E0.01263 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.079 Y106.251 E0.00248 ; perimeter (bridge)
G1 X101.856 Y106.139 E0.01042 ; perimeter (bridge)
G1 X101.733 Y106.017 E0.00727 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.538 Y105.825 E0.01267 ; perimeter
G1 X101.361 Y105.800 E0.00829 ; perimeter
G1 X101.245 Y105.710 E0.00679 ; perimeter
G1 X101.076 Y105.680 E0.00796 ; perimeter
G1 X100.917 Y105.586 E0.00854 ; perimeter
G1 X100.745 Y105.407 E0.01152 ; perimeter
G1 X100.650 Y105.224 E0.00955 ; perimeter
G1 X100.625 Y104.903 E0.01491 ; perimeter
G1 X100.647 Y104.764 E0.00655 ; perimeter
G1 X100.466 Y104.270 E0.02435 ; perimeter
G1 X100.295 Y104.016 E0.01420 ; perimeter
G1 X100.198 Y103.777 E0.01193 ; perimeter
G1 X100.034 Y103.057 E0.03423 ; perimeter
G1 X99.955 Y102.516 E0.02530 ; perimeter
G1 X99.943 Y101.993 E0.02423 ; perimeter
G1 X99.867 Y101.771 E0.01088 ; perimeter
G1 X99.830 Y101.486 E0.01331 ; perimeter
G1 X99.753 Y101.184 E0.01443 ; perimeter
G1 X99.744 Y100.900 E0.01315 ; perimeter
G1 X99.783 Y100.646 E0.01192 ; perimeter
G1 X99.934 Y100.284 E0.01818 ; perimeter
G1 X100.082 Y100.115 E0.01038 ; perimeter
G1 X100.323 Y100.287 E0.01370 ; perimeter
G1 X100.397 Y100.406 E0.00651 ; perimeter
G1 X100.474 Y100.600 E0.00966 ; perimeter
G1 X100.525 Y100.829 E0.01085 ; perimeter
G1 X100.553 Y101.248 E0.01944 ; perimeter
G1 X100.546 Y101.708 E0.02132 ; perimeter
G1 X100.511 Y101.819 E0.00541 ; perimeter
G1 X100.729 Y102.547 E0.03521 ; perimeter
G1 X100.983 Y103.534 E0.04720 ; perimeter
G1 X100.996 Y103.706 E0.00798 ; perimeter
G1 X100.978 Y103.953 E0.01147 ; perimeter
G1 X101.017 Y104.339 E0.01796 ; perimeter
G1 X101.233 Y104.717 E0.02018 ; perimeter
G1 X101.426 Y104.940 E0.01369 ; perimeter
G1 X101.492 Y105.043 E0.00563 ; perimeter
G1 X101.511 Y105.124 E0.00389 ; perimeter
G1 X101.672 Y105.351 E0.01288 ; perimeter
G1 X101.680 Y105.438 E0.00404 ; perimeter
G1 X101.826 Y105.607 E0.01035 ; perimeter
G1 X101.843 Y105.748 E0.00657 ; perimeter
G1 X102.017 Y105.902 E0.01076 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.287 Y106.197 E0.01671 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.522 Y106.372 E0.01356 ; perimeter
G1 X102.593 Y106.378 E0.00332 ; perimeter
G1 X102.778 Y106.505 E0.01037 ; perimeter
G1 X103.013 Y106.591 E0.01161 ; perimeter
G1 X103.312 Y106.789 E0.01661 ; perimeter
G1 X103.571 Y107.043 E0.01680 ; perimeter
G1 X103.747 Y107.337 E0.01588 ; perimeter
G1 X103.804 Y107.475 E0.00690 ; perimeter
G1 X103.819 Y107.634 E0.00739 ; perimeter
G1 X103.732 Y107.714 F10800.000 ; move inwards before travel
G1 X103.540 Y107.536 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.320247
G1 F2400.000
G1 X102.874 Y106.937 E0.02067 ; infill
;WIDTH:0.29075
G1 X102.697 Y106.732 E0.00558 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.874 Y106.937 E-0.07140 ; wipe and retract
;WIPE_END
G1 E-2.32860 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X101.150 Y105.444 ; move to first infill point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.114077
G1 F2400.000
G1 X100.925 Y104.729 E0.00443 ; infill
;WIDTH:0.106711
G1 X100.889 Y104.651 E0.00045 ; infill
G1 X100.901 Y104.645 F10800.000 ; move to first infill point
;WIDTH:0.232863
G1 F2400.000
G1 X100.962 Y104.917 E0.00439 ; infill
G1 X101.182 Y105.454 E0.00917 ; infill
G1 X101.330 Y105.480 F10800.000 ; move to first infill point
;WIDTH:0.377938
G1 F2400.000
G1 X101.079 Y105.165 E0.01122 ; infill
G1 X100.875 Y104.867 E0.01006 ; infill
G1 X100.881 Y104.828 F10800.000 ; move to first infill point
;WIDTH:0.312285
G1 F2400.000
G1 X101.157 Y105.283 E0.01193 ; infill
G1 X101.448 Y105.553 E0.00890 ; infill
G1 X101.445 Y105.512 F10800.000 ; move to first infill point
;WIDTH:0.145465
G1 F2400.000
G1 X100.877 Y105.036 E0.00632 ; infill
G1 X100.728 Y104.258 F10800.000 ; move to first infill point
;WIDTH:0.362001
G1 F2400.000
G1 X100.361 Y102.650 E0.04377 ; infill
;WIDTH:0.25266
G1 X100.268 Y102.128 E0.00925 ; infill
;WIDTH:0.158089
G1 X100.204 Y101.834 E0.00288 ; infill
;WIDTH:0.170491
G1 X100.198 Y101.798 E0.00038 ; infill
G1 X100.176 Y101.931 F10800.000 ; move to first infill point
;WIDTH:0.253768
G1 F2400.000
G1 X100.201 Y101.652 E0.00491 ; infill
G1 X100.168 Y101.258 E0.00693 ; infill
;WIDTH:0.353276
G1 X100.138 Y100.924 E0.00865 ; infill
;WIDTH:0.34589
G1 X100.139 Y100.884 E0.00100 ; infill
;WIDTH:0.337148
G1 X100.137 Y100.814 E0.00171 ; infill
;WIDTH:0.31146
G1 X100.135 Y100.745 E0.00156 ; infill
;WIDTH:0.285772
G1 X100.158 Y100.479 E0.00538 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.135 Y100.745 E-0.07035 ; wipe and retract
;WIPE_END
G1 E-2.32965 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X100.365 Y97.542 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.417 Y97.614 E0.00411 ; perimeter
G1 X100.438 Y97.853 E0.01115 ; perimeter
G1 X100.249 Y98.468 E0.02980 ; perimeter
G1 X100.164 Y98.622 E0.00815 ; perimeter
G1 X100.126 Y98.807 E0.00874 ; perimeter
G1 X100.011 Y98.954 E0.00867 ; perimeter
G1 X99.988 Y98.956 E0.00106 ; perimeter
G1 X99.962 Y98.934 E0.00156 ; perimeter
G1 X99.897 Y98.776 E0.00791 ; perimeter
G1 X99.710 Y98.689 E0.00958 ; perimeter
G1 X99.623 Y98.502 E0.00955 ; perimeter
G1 X99.478 Y98.069 E0.02113 ; perimeter
G1 X99.493 Y97.845 E0.01041 ; perimeter
G1 X99.601 Y97.632 E0.01106 ; perimeter
G1 X99.768 Y97.454 E0.01136 ; perimeter
G1 X99.897 Y97.400 E0.00646 ; perimeter
G1 X100.117 Y97.406 E0.01018 ; perimeter
G1 X100.276 Y97.458 E0.00775 ; perimeter
G1 X100.321 Y97.500 E0.00288 ; perimeter
G1 X100.341 Y97.627 F10800.000 ; move inwards before travel
G1 X99.991 Y97.653 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.240366
G1 F2400.000
G1 X99.913 Y98.518 E0.01425 ; infill
G1 X99.930 Y98.525 F10800.000 ; move to first infill point
;WIDTH:0.325195
G1 F2400.000
G1 X99.910 Y97.656 E0.02042 ; infill
G1 X100.001 Y97.834 F10800.000 ; move to first infill point
;WIDTH:0.416276
G1 F2400.000
G1 X99.992 Y97.841 E0.00036 ; infill
;WIDTH:0.439412
G1 X99.964 Y97.887 E0.00178 ; infill
;WIDTH:0.453446
G1 X99.927 Y97.975 E0.00327 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.964 Y97.887 E-0.02526 ; wipe and retract
;WIPE_END
G1 E-2.37474 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X101.386 Y95.577 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.366 Y95.423 E0.00719 ; perimeter
G1 X101.452 Y95.267 E0.00823 ; perimeter
G1 X101.622 Y95.098 E0.01111 ; perimeter
G1 X102.540 Y94.555 E0.04938 ; perimeter
G1 X103.071 Y94.283 E0.02767 ; perimeter
G1 X103.268 Y94.140 E0.01126 ; perimeter
G1 X103.564 Y94.076 E0.01404 ; perimeter
G1 X103.842 Y94.072 E0.01288 ; perimeter
G1 X104.053 Y94.128 E0.01012 ; perimeter
G1 X104.263 Y94.271 E0.01177 ; perimeter
G1 X104.381 Y94.448 E0.00983 ; perimeter
G1 X104.376 Y94.618 E0.00790 ; perimeter
G1 X104.309 Y94.726 E0.00587 ; perimeter
G1 X104.118 Y94.838 E0.01025 ; perimeter
G1 X103.365 Y95.037 E0.03611 ; perimeter
G1 X103.267 Y95.042 E0.00452 ; perimeter
G1 X103.015 Y95.167 E0.01300 ; perimeter
G1 X102.912 Y95.249 E0.00611 ; perimeter
G1 X102.690 Y95.355 E0.01142 ; perimeter
G1 X102.468 Y95.627 E0.01628 ; perimeter
G1 X102.086 Y95.863 E0.02079 ; perimeter
G1 X101.792 Y95.892 E0.01368 ; perimeter
G1 X101.543 Y95.794 E0.01240 ; perimeter
G1 X101.404 Y95.634 E0.00983 ; perimeter
G1 X101.481 Y95.454 F10800.000 ; move inwards before travel
G1 X101.686 Y95.578 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.453145
G1 F2400.000
G1 X102.099 Y95.338 E0.01628 ; infill
G1 X102.248 Y95.222 E0.00645 ; infill
;WIDTH:0.326906
G1 X102.477 Y95.035 E0.00698 ; infill
G1 X103.142 Y94.677 E0.01783 ; infill
;WIDTH:0.33979
G1 X103.197 Y94.656 E0.00145 ; infill
G1 X103.273 Y94.636 F10800.000 ; move to first infill point
;WIDTH:0.368576
G1 F2400.000
G1 X103.453 Y94.552 E0.00537 ; infill
G1 X103.614 Y94.511 E0.00452 ; infill
G1 X103.790 Y94.489 E0.00480 ; infill
G1 X104.120 Y94.490 E0.00892 ; infill
G1 X104.132 Y94.508 F10800.000 ; move to first infill point
;WIDTH:0.285072
G1 F2400.000
G1 X103.195 Y94.491 E0.01888 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.132 Y94.508 E-0.24747 ; wipe and retract
;WIPE_END
G1 E-2.15253 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X105.940 Y94.553 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.025 Y94.407 E0.00783 ; perimeter
G1 X106.199 Y94.301 E0.00944 ; perimeter
G1 X106.498 Y94.275 E0.01389 ; perimeter
G1 X106.629 Y94.308 E0.00627 ; perimeter
G1 X106.718 Y94.365 E0.00491 ; perimeter
G1 X106.833 Y94.506 E0.00840 ; perimeter
G1 X106.867 Y94.654 E0.00702 ; perimeter
G1 X106.777 Y94.862 E0.01051 ; perimeter
G1 X106.579 Y94.980 E0.01066 ; perimeter
G1 X106.269 Y95.017 E0.01446 ; perimeter
G1 X106.168 Y94.986 E0.00493 ; perimeter
G1 X106.065 Y94.919 E0.00568 ; perimeter
G1 X105.947 Y94.742 E0.00987 ; perimeter
G1 X105.940 Y94.613 E0.00599 ; perimeter
G1 X106.102 Y94.506 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.025 Y94.407 E-0.05875 ; wipe and retract
G1 X106.199 Y94.301 E-0.05380 ; wipe and retract
G1 X106.498 Y94.275 E-0.07910 ; wipe and retract
G1 X106.629 Y94.308 E-0.03575 ; wipe and retract
G1 X106.718 Y94.365 E-0.02795 ; wipe and retract
G1 X106.833 Y94.506 E-0.04784 ; wipe and retract
G1 X106.867 Y94.654 E-0.04001 ; wipe and retract
G1 X106.777 Y94.862 E-0.05989 ; wipe and retract
G1 X106.579 Y94.980 E-0.06070 ; wipe and retract
G1 X106.269 Y95.017 E-0.08240 ; wipe and retract
G1 X106.168 Y94.986 E-0.02807 ; wipe and retract
G1 X106.065 Y94.919 E-0.03236 ; wipe and retract
G1 X105.947 Y94.742 E-0.05621 ; wipe and retract
G1 X105.940 Y94.613 E-0.03411 ; wipe and retract
;WIPE_END
G1 E-1.70305 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X108.956 Y95.509 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.909 Y95.337 E0.00826 ; perimeter
G1 X108.972 Y95.154 E0.00894 ; perimeter
G1 X109.104 Y95.054 E0.00770 ; perimeter
G1 X109.260 Y95.016 E0.00744 ; perimeter
G1 X109.397 Y95.022 E0.00635 ; perimeter
G1 X109.683 Y95.100 E0.01370 ; perimeter
G1 X109.957 Y95.264 E0.01479 ; perimeter
G1 X110.212 Y95.492 E0.01583 ; perimeter
G1 X110.288 Y95.609 E0.00650 ; perimeter
G1 X110.488 Y95.785 E0.01232 ; perimeter
G1 X111.149 Y96.169 E0.03542 ; perimeter
G1 X111.358 Y96.339 E0.01248 ; perimeter
G1 X111.627 Y96.489 E0.01427 ; perimeter
G1 X111.822 Y96.676 E0.01248 ; perimeter
G1 X111.886 Y96.770 E0.00530 ; perimeter
G1 X111.953 Y96.950 E0.00888 ; perimeter
G1 X111.949 Y97.149 E0.00924 ; perimeter
G1 X111.856 Y97.342 E0.00989 ; perimeter
G1 X111.807 Y97.402 E0.00363 ; perimeter
G1 X111.583 Y97.444 E0.01054 ; perimeter
G1 X111.365 Y97.373 E0.01064 ; perimeter
G1 X111.173 Y97.220 E0.01135 ; perimeter
G1 X111.040 Y97.028 E0.01082 ; perimeter
G1 X110.621 Y96.624 E0.02697 ; perimeter
G1 X110.526 Y96.491 E0.00756 ; perimeter
G1 X110.318 Y96.271 E0.01403 ; perimeter
G1 X109.941 Y95.984 E0.02194 ; perimeter
G1 X109.547 Y95.931 E0.01841 ; perimeter
G1 X109.168 Y95.777 E0.01898 ; perimeter
G1 X108.992 Y95.557 E0.01306 ; perimeter
G1 X109.050 Y95.357 F10800.000 ; move inwards before travel
G1 X109.169 Y95.323 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.20035
G1 F2400.000
G1 X109.244 Y95.349 E0.00104 ; infill
;WIDTH:0.229978
G1 X109.262 Y95.360 E0.00033 ; infill
;WIDTH:0.268701
G1 X109.295 Y95.372 E0.00066 ; infill
;WIDTH:0.311911
G1 X110.015 Y95.751 E0.01819 ; infill
G1 X110.094 Y95.754 F10800.000 ; move to first infill point
;WIDTH:0.387054
G1 F2400.000
G1 X109.416 Y95.446 E0.02133 ; infill
;WIDTH:0.369526
G1 X109.181 Y95.298 E0.00754 ; infill
G1 X110.526 Y96.136 F10800.000 ; move to first infill point
;WIDTH:0.258321
G1 F2400.000
G1 X110.950 Y96.457 E0.00953 ; infill
;WIDTH:0.284679
G1 X111.163 Y96.645 E0.00571 ; infill
;WIDTH:0.31079
G1 X111.245 Y96.705 E0.00226 ; infill
;WIDTH:0.3369
G1 X111.326 Y96.766 E0.00248 ; infill
;WIDTH:0.347282
G1 X111.349 Y96.784 E0.00074 ; infill
;WIDTH:0.368988
G1 X111.385 Y96.817 E0.00131 ; infill
;WIDTH:0.396094
G1 X111.684 Y97.144 E0.01302 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.385 Y96.817 E-0.11702 ; wipe and retract
;WIPE_END
G1 E-2.28298 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X113.656 Y100.500 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.723 Y100.450 E0.00385 ; perimeter
G1 X113.825 Y100.415 E0.00502 ; perimeter
G1 X113.954 Y100.417 E0.00598 ; perimeter
G1 X114.143 Y100.473 E0.00913 ; perimeter
G1 X114.210 Y100.512 E0.00357 ; perimeter
G1 X114.362 Y100.668 E0.01011 ; perimeter
G1 X114.419 Y100.800 E0.00664 ; perimeter
G1 X114.417 Y101.035 E0.01086 ; perimeter
G1 X114.339 Y101.181 E0.00768 ; perimeter
G1 X114.250 Y101.246 E0.00509 ; perimeter
G1 X114.129 Y101.279 E0.00583 ; perimeter
G1 X114.004 Y101.275 E0.00578 ; perimeter
G1 X113.811 Y101.204 E0.00953 ; perimeter
G1 X113.693 Y101.106 E0.00711 ; perimeter
G1 X113.579 Y100.884 E0.01157 ; perimeter
G1 X113.567 Y100.693 E0.00885 ; perimeter
G1 X113.589 Y100.601 E0.00440 ; perimeter
G1 X113.623 Y100.550 E0.00285 ; perimeter
G1 X113.737 Y100.520 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.723 Y100.450 E-0.03718 ; wipe and retract
G1 X113.825 Y100.415 E-0.02862 ; wipe and retract
G1 X113.954 Y100.417 E-0.03410 ; wipe and retract
G1 X114.143 Y100.473 E-0.05202 ; wipe and retract
G1 X114.210 Y100.512 E-0.02034 ; wipe and retract
G1 X114.362 Y100.668 E-0.05761 ; wipe and retract
G1 X114.419 Y100.800 E-0.03784 ; wipe and retract
G1 X114.417 Y101.035 E-0.06189 ; wipe and retract
G1 X114.339 Y101.181 E-0.04375 ; wipe and retract
G1 X114.250 Y101.246 E-0.02901 ; wipe and retract
G1 X114.129 Y101.279 E-0.03320 ; wipe and retract
G1 X114.004 Y101.275 E-0.03294 ; wipe and retract
G1 X113.811 Y101.204 E-0.05428 ; wipe and retract
G1 X113.693 Y101.106 E-0.04051 ; wipe and retract
G1 X113.579 Y100.884 E-0.06591 ; wipe and retract
G1 X113.567 Y100.693 E-0.05040 ; wipe and retract
G1 X113.589 Y100.601 E-0.02507 ; wipe and retract
G1 X113.623 Y100.550 E-0.01624 ; wipe and retract
;WIPE_END
G1 E-1.67910 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X115.407 Y106.053 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.599 Y106.069 E0.00893 ; perimeter
G1 X115.757 Y106.139 E0.00801 ; perimeter
G1 X115.827 Y106.210 E0.00464 ; perimeter
G1 X115.884 Y106.348 E0.00690 ; perimeter
G1 X115.894 Y106.562 E0.00994 ; perimeter
G1 X115.863 Y106.974 E0.01912 ; perimeter
G1 X115.766 Y107.388 E0.01970 ; perimeter
G1 X115.675 Y107.522 E0.00752 ; perimeter
G1 X115.629 Y107.654 E0.00645 ; perimeter
G1 X115.495 Y107.760 E0.00789 ; perimeter
G1 X115.323 Y107.519 E0.01371 ; perimeter
G1 X115.166 Y106.947 E0.02749 ; perimeter
G1 X115.112 Y106.501 E0.02082 ; perimeter
G1 X115.144 Y106.292 E0.00977 ; perimeter
G1 X115.306 Y106.086 E0.01215 ; perimeter
G1 X115.350 Y106.072 E0.00214 ; perimeter
G1 X115.533 Y106.198 F10800.000 ; move inwards before travel
G1 X115.507 Y106.450 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325198
G1 F2400.000
G1 X115.514 Y106.720 E0.00635 ; infill
;WIDTH:0.294959
G1 X115.515 Y106.884 E0.00343 ; infill
;WIDTH:0.267961
G1 X115.551 Y107.252 E0.00692 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.515 Y106.884 E-0.09758 ; wipe and retract
;WIPE_END
G1 E-2.30242 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X115.678 Y110.479 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.789 Y110.567 E0.00657 ; perimeter
G1 X115.854 Y110.662 E0.00535 ; perimeter
G1 X115.901 Y110.878 E0.01022 ; perimeter
G1 X115.887 Y111.010 E0.00616 ; perimeter
G1 X115.817 Y111.159 E0.00762 ; perimeter
G1 X115.721 Y111.243 E0.00590 ; perimeter
G1 X115.625 Y111.282 E0.00480 ; perimeter
G1 X115.429 Y111.288 E0.00909 ; perimeter
G1 X115.254 Y111.212 E0.00884 ; perimeter
G1 X115.162 Y111.066 E0.00800 ; perimeter
G1 X115.123 Y110.876 E0.00898 ; perimeter
G1 X115.156 Y110.695 E0.00850 ; perimeter
G1 X115.231 Y110.568 E0.00686 ; perimeter
G1 X115.365 Y110.486 E0.00728 ; perimeter
G1 X115.619 Y110.467 E0.01178 ; perimeter
G1 X115.698 Y110.619 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.789 Y110.567 E-0.05204 ; wipe and retract
G1 X115.854 Y110.662 E-0.03049 ; wipe and retract
G1 X115.901 Y110.878 E-0.05823 ; wipe and retract
G1 X115.887 Y111.010 E-0.03510 ; wipe and retract
G1 X115.817 Y111.159 E-0.04344 ; wipe and retract
G1 X115.721 Y111.243 E-0.03359 ; wipe and retract
G1 X115.625 Y111.282 E-0.02735 ; wipe and retract
G1 X115.429 Y111.288 E-0.05176 ; wipe and retract
G1 X115.254 Y111.212 E-0.05034 ; wipe and retract
G1 X115.162 Y111.066 E-0.04560 ; wipe and retract
G1 X115.123 Y110.876 E-0.05114 ; wipe and retract
G1 X115.156 Y110.695 E-0.04845 ; wipe and retract
G1 X115.231 Y110.568 E-0.03910 ; wipe and retract
G1 X115.365 Y110.486 E-0.04147 ; wipe and retract
G1 X115.619 Y110.467 E-0.06714 ; wipe and retract
;WIPE_END
G1 E-1.72476 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X112.200 Y113.855 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.686 Y114.130 E0.02586 ; perimeter
G1 X112.918 Y114.304 E0.01345 ; perimeter
G1 X113.485 Y114.803 E0.03499 ; perimeter
G1 X113.677 Y114.912 E0.01025 ; perimeter
G1 X114.065 Y115.240 E0.02351 ; perimeter
G1 X114.552 Y115.333 E0.02296 ; perimeter
G1 X114.726 Y115.063 E0.01491 ; perimeter
G1 X114.948 Y114.808 E0.01565 ; perimeter
G1 X115.075 Y114.691 E0.00800 ; perimeter
G1 X115.179 Y114.636 E0.00547 ; perimeter
G1 X115.308 Y114.616 E0.00602 ; perimeter
G1 X115.474 Y114.622 E0.00771 ; perimeter
G1 X115.581 Y114.666 E0.00536 ; perimeter
G1 X115.660 Y114.733 E0.00481 ; perimeter
G1 X115.725 Y114.824 E0.00518 ; perimeter
G1 X115.757 Y114.921 E0.00471 ; perimeter
G1 X115.736 Y115.140 E0.01021 ; perimeter
G1 X115.602 Y115.368 E0.01225 ; perimeter
G1 X115.377 Y115.611 E0.01532 ; perimeter
G1 X115.227 Y115.677 E0.00763 ; perimeter
G1 X115.089 Y115.692 E0.00641 ; perimeter
G1 X114.869 Y115.623 E0.01067 ; perimeter
G1 X114.738 Y115.547 E0.00700 ; perimeter
G1 X114.626 Y115.442 E0.00712 ; perimeter
G1 X114.237 Y115.292 E0.01931 ; perimeter
G1 X113.838 Y115.491 E0.02065 ; perimeter
G1 X113.654 Y115.607 E0.01008 ; perimeter
G1 X113.440 Y115.656 E0.01016 ; perimeter
G1 X113.290 Y115.635 E0.00700 ; perimeter
G1 X113.150 Y115.568 E0.00718 ; perimeter
G1 X112.929 Y115.372 E0.01369 ; perimeter
G1 X112.799 Y115.211 E0.00958 ; perimeter
G1 X112.385 Y114.937 E0.02302 ; perimeter
G1 X112.238 Y114.811 E0.00895 ; perimeter
G1 X112.074 Y114.556 E0.01405 ; perimeter
G1 X112.023 Y114.357 E0.00953 ; perimeter
G1 X111.747 Y113.909 E0.02436 ; perimeter
G1 X111.482 Y113.700 E0.01565 ; perimeter
G1 X111.352 Y113.540 E0.00954 ; perimeter
G1 X111.287 Y113.260 E0.01334 ; perimeter
G1 X111.293 Y113.205 E0.00253 ; perimeter
G1 X111.350 Y113.058 E0.00732 ; perimeter
G1 X111.459 Y112.908 E0.00859 ; perimeter
G1 X111.623 Y112.821 E0.00858 ; perimeter
G1 X111.804 Y112.830 E0.00840 ; perimeter
G1 X111.935 Y112.885 E0.00662 ; perimeter
G1 X112.072 Y113.035 E0.00938 ; perimeter
G1 X112.150 Y113.254 E0.01076 ; perimeter
G1 X112.147 Y113.377 E0.00571 ; perimeter
G1 X112.247 Y113.617 E0.01208 ; perimeter
G1 X112.212 Y113.796 E0.00844 ; perimeter
G1 X112.079 Y114.236 F10800.000 ; move inwards before travel
G1 X111.970 Y113.774 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.341261
G1 F2400.000
G1 X111.757 Y113.421 E0.01023 ; infill
G1 X111.639 Y113.082 E0.00889 ; infill
G1 X111.772 Y113.078 F10800.000 ; move to first infill point
;WIDTH:0.104796
G1 F2400.000
G1 X111.967 Y113.789 E0.00379 ; infill
G1 X112.203 Y114.167 F10800.000 ; move to first infill point
;WIDTH:0.319088
G1 F2400.000
G1 X112.550 Y114.540 E0.01170 ; infill
G1 X113.071 Y114.943 E0.01513 ; infill
;WIDTH:0.358455
G1 X113.267 Y115.138 E0.00725 ; infill
;WIDTH:0.381153
G1 X113.423 Y115.239 E0.00523 ; infill
G1 X113.717 Y115.282 E0.00836 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.423 Y115.239 E-0.07848 ; wipe and retract
G1 X113.267 Y115.138 E-0.04903 ; wipe and retract
;WIPE_END
G1 E-2.27248 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X108.902 Y110.888 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.992 Y110.749 E0.00766 ; perimeter
G1 X109.116 Y110.668 E0.00686 ; perimeter
G1 X109.294 Y110.636 E0.00840 ; perimeter
G1 X109.605 Y110.697 E0.01466 ; perimeter
G1 X110.016 Y110.965 E0.02270 ; perimeter
G1 X110.193 Y111.145 E0.01169 ; perimeter
G1 X110.202 Y111.195 E0.00236 ; perimeter
G1 X110.338 Y111.406 E0.01162 ; perimeter
G1 X110.356 Y111.500 E0.00446 ; perimeter
G1 X110.328 Y111.602 E0.00487 ; perimeter
G1 X110.264 Y111.668 E0.00427 ; perimeter
G1 X110.143 Y111.724 E0.00616 ; perimeter
G1 X109.885 Y111.726 E0.01199 ; perimeter
G1 X109.494 Y111.613 E0.01883 ; perimeter
G1 X109.384 Y111.550 E0.00590 ; perimeter
G1 X109.115 Y111.342 E0.01572 ; perimeter
G1 X108.973 Y111.167 E0.01044 ; perimeter
G1 X108.901 Y110.948 E0.01068 ; perimeter
G1 X109.061 Y110.841 F10800.000 ; move inwards before travel
G1 X109.155 Y110.946 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.273905
G1 F2400.000
G1 X109.950 Y111.241 E0.01627 ; infill
G1 X110.053 Y111.409 F10800.000 ; move to first infill point
;WIDTH:0.392093
G1 F2400.000
G1 X109.658 Y111.228 E0.01263 ; infill
G1 X109.191 Y110.900 E0.01654 ; infill
G1 X109.171 Y110.920 F10800.000 ; move to first infill point
;WIDTH:0.352716
G1 F2400.000
G1 X110.087 Y111.484 E0.02772 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.171 Y110.920 E-0.28395 ; wipe and retract
;WIPE_END
G1 E-2.11605 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 X104.741 Y108.571 ; move to first perimeter point
G1 Z21.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.776 Y108.409 E0.00767 ; perimeter
G1 X105.106 Y108.308 E0.01598 ; perimeter
G1 X105.414 Y108.328 E0.01431 ; perimeter
G1 X105.632 Y108.386 E0.01046 ; perimeter
G1 X105.895 Y108.501 E0.01329 ; perimeter
G1 X106.247 Y108.733 E0.01953 ; perimeter
G1 X106.404 Y108.891 E0.01031 ; perimeter
G1 X106.488 Y109.039 E0.00787 ; perimeter
G1 X106.512 Y109.163 E0.00586 ; perimeter
G1 X106.460 Y109.269 E0.00548 ; perimeter
G1 X106.383 Y109.325 E0.00442 ; perimeter
G1 X105.944 Y109.342 E0.02034 ; perimeter
G1 X105.736 Y109.294 E0.00989 ; perimeter
G1 X105.524 Y109.219 E0.01040 ; perimeter
G1 X105.231 Y109.077 E0.01509 ; perimeter
G1 X105.056 Y108.942 E0.01024 ; perimeter
G1 X104.899 Y108.785 E0.01029 ; perimeter
G1 X104.777 Y108.619 E0.00955 ; perimeter
G1 X104.876 Y108.475 F10800.000 ; move inwards before travel
G1 X105.053 Y108.588 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.151913
G1 F2400.000
G1 X105.887 Y108.784 E0.00776 ; infill
G1 X106.217 Y109.050 F10800.000 ; move to first infill point
;WIDTH:0.275268
G1 F2400.000
G1 X105.978 Y108.984 E0.00479 ; infill
G1 X105.500 Y108.764 E0.01017 ; infill
G1 X105.063 Y108.602 E0.00900 ; infill
;LAYER_CHANGE
;Z:22
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;22
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.500 Y108.764 E-0.12295 ; wipe and retract
G1 X105.978 Y108.984 E-0.13885 ; wipe and retract
G1 X106.217 Y109.050 E-0.06547 ; wipe and retract
;WIPE_END
G1 E-2.07273 F2400.000 ; retract
G1 Z21.875 F10800.000 ; lift Z
G1 Z22.000 ; move to next layer (109)
;AFTER_LAYER_CHANGE
;22
G1 X105.048 Y108.621 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.117 Y108.490 E0.00684 ; perimeter
G1 X105.347 Y108.429 E0.01106 ; perimeter
G1 X105.557 Y108.437 E0.00973 ; perimeter
G1 X105.880 Y108.505 E0.01531 ; perimeter
G1 X106.146 Y108.615 E0.01332 ; perimeter
G1 X106.547 Y108.879 E0.02222 ; perimeter
G1 X106.666 Y108.999 E0.00781 ; perimeter
G1 X106.770 Y109.187 E0.00997 ; perimeter
G1 X106.780 Y109.303 E0.00542 ; perimeter
G1 X106.759 Y109.344 E0.00211 ; perimeter
G1 X106.615 Y109.458 E0.00852 ; perimeter
G1 X106.449 Y109.475 E0.00775 ; perimeter
G1 X106.165 Y109.459 E0.01317 ; perimeter
G1 X106.044 Y109.430 E0.00573 ; perimeter
G1 X105.738 Y109.313 E0.01521 ; perimeter
G1 X105.641 Y109.248 E0.00538 ; perimeter
G1 X105.449 Y109.162 E0.00974 ; perimeter
G1 X105.293 Y109.041 E0.00915 ; perimeter
G1 X105.052 Y108.681 E0.02010 ; perimeter
G1 X105.183 Y108.561 F10800.000 ; move inwards before travel
G1 X105.361 Y108.671 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.264512
G1 F2400.000
G1 X106.192 Y109.218 E0.01834 ; infill
G1 X106.515 Y109.226 F10800.000 ; move to first infill point
;WIDTH:0.312048
G1 F2400.000
G1 X105.765 Y108.878 E0.01850 ; infill
G1 X105.386 Y108.755 E0.00892 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.765 Y108.878 E-0.10519 ; wipe and retract
G1 X106.515 Y109.226 E-0.21818 ; wipe and retract
;WIPE_END
G1 E-2.07664 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X108.855 Y110.726 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.878 Y110.632 E0.00445 ; perimeter
G1 X108.956 Y110.574 E0.00452 ; perimeter
G1 X109.215 Y110.564 E0.01199 ; perimeter
G1 X109.272 Y110.592 E0.00297 ; perimeter
G1 X109.578 Y110.658 E0.01452 ; perimeter
G1 X110.210 Y111.073 E0.03500 ; perimeter
G1 X110.430 Y111.289 E0.01429 ; perimeter
G1 X110.547 Y111.467 E0.00986 ; perimeter
G1 X110.595 Y111.740 E0.01283 ; perimeter
G1 X110.510 Y111.817 E0.00533 ; perimeter
G1 X110.420 Y111.847 E0.00437 ; perimeter
G1 X110.107 Y111.843 E0.01450 ; perimeter
G1 X109.674 Y111.706 E0.02106 ; perimeter
G1 X109.429 Y111.566 E0.01305 ; perimeter
G1 X109.080 Y111.295 E0.02048 ; perimeter
G1 X108.783 Y110.870 E0.02400 ; perimeter
G1 X108.788 Y110.802 E0.00319 ; perimeter
G1 X108.816 Y110.771 E0.00191 ; perimeter
G1 X108.949 Y110.706 F10800.000 ; move inwards before travel
G1 X109.089 Y110.887 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.376431
G1 F2400.000
G1 X109.418 Y111.041 E0.01006 ; infill
;WIDTH:0.388096
G1 X109.841 Y111.325 E0.01462 ; infill
G1 X110.313 Y111.549 E0.01500 ; infill
G1 X111.473 Y112.816 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.657 Y112.738 E0.00931 ; perimeter
G1 X111.812 Y112.740 E0.00714 ; perimeter
G1 X111.923 Y112.782 E0.00554 ; perimeter
G1 X112.088 Y112.945 E0.01074 ; perimeter
G1 X112.156 Y113.129 E0.00907 ; perimeter
G1 X112.147 Y113.418 E0.01340 ; perimeter
G1 X112.171 Y113.476 E0.00290 ; perimeter
G1 X112.096 Y113.852 E0.01777 ; perimeter
G1 X112.109 Y113.860 E0.00070 ; perimeter
G1 X111.951 Y113.862 E0.00729 ; perimeter
G1 X111.875 Y113.753 E0.00616 ; perimeter
G1 X111.683 Y113.703 E0.00921 ; perimeter
G1 X111.469 Y113.563 E0.01183 ; perimeter
G1 X111.366 Y113.455 E0.00693 ; perimeter
G1 X111.299 Y113.160 E0.01399 ; perimeter
G1 X111.362 Y112.945 E0.01039 ; perimeter
G1 X111.434 Y112.862 E0.00508 ; perimeter
G1 X111.657 Y112.897 F10800.000 ; move inwards before travel
G1 X112.253 Y113.953 ; move to first perimeter point
G1 F1800.000
G1 X112.344 Y114.012 E0.00501 ; perimeter
G1 X112.516 Y114.184 E0.01128 ; perimeter
G1 X112.661 Y114.202 E0.00677 ; perimeter
G1 X112.956 Y114.328 E0.01487 ; perimeter
G1 X113.175 Y114.480 E0.01235 ; perimeter
G1 X113.670 Y114.881 E0.02948 ; perimeter
G1 X113.929 Y115.129 E0.01663 ; perimeter
G1 X114.064 Y115.297 E0.00997 ; perimeter
G1 X113.853 Y115.408 E0.01101 ; perimeter
G1 X113.626 Y115.578 E0.01316 ; perimeter
G1 X113.451 Y115.618 E0.00832 ; perimeter
G1 X113.284 Y115.599 E0.00778 ; perimeter
G1 X113.124 Y115.527 E0.00813 ; perimeter
G1 X112.366 Y114.892 E0.04581 ; perimeter
G1 X112.234 Y114.692 E0.01109 ; perimeter
G1 X112.218 Y114.656 E0.00185 ; perimeter
G1 X112.217 Y114.425 E0.01069 ; perimeter
G1 X112.154 Y114.253 E0.00847 ; perimeter
G1 X112.235 Y114.010 E0.01188 ; perimeter
G1 X112.318 Y114.040 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.344 Y114.012 E-0.02898 ; wipe and retract
G1 X112.516 Y114.184 E-0.06423 ; wipe and retract
G1 X112.661 Y114.202 E-0.03856 ; wipe and retract
G1 X112.956 Y114.328 E-0.08469 ; wipe and retract
G1 X113.175 Y114.480 E-0.07036 ; wipe and retract
G1 X113.670 Y114.881 E-0.16794 ; wipe and retract
G1 X113.929 Y115.129 E-0.09476 ; wipe and retract
G1 X114.064 Y115.297 E-0.05682 ; wipe and retract
G1 X113.853 Y115.408 E-0.06273 ; wipe and retract
G1 X113.626 Y115.578 E-0.07497 ; wipe and retract
G1 X113.451 Y115.618 E-0.04738 ; wipe and retract
G1 X113.284 Y115.599 E-0.04429 ; wipe and retract
G1 X113.124 Y115.527 E-0.04631 ; wipe and retract
G1 X112.366 Y114.892 E-0.26100 ; wipe and retract
G1 X112.234 Y114.692 E-0.06317 ; wipe and retract
G1 X112.218 Y114.656 E-0.01054 ; wipe and retract
G1 X112.217 Y114.425 E-0.06088 ; wipe and retract
G1 X112.154 Y114.253 E-0.04823 ; wipe and retract
G1 X112.235 Y114.010 E-0.06765 ; wipe and retract
;WIPE_END
G1 E-1.00650 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X115.236 Y115.657 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.095 Y115.668 E0.00653 ; perimeter
G1 X114.907 Y115.608 E0.00913 ; perimeter
G1 X114.788 Y115.541 E0.00632 ; perimeter
G1 X114.560 Y115.344 E0.01397 ; perimeter
G1 X114.758 Y115.037 E0.01693 ; perimeter
G1 X114.958 Y114.797 E0.01447 ; perimeter
G1 X115.068 Y114.699 E0.00681 ; perimeter
G1 X115.178 Y114.640 E0.00579 ; perimeter
G1 X115.298 Y114.620 E0.00563 ; perimeter
G1 X115.466 Y114.628 E0.00780 ; perimeter
G1 X115.577 Y114.673 E0.00551 ; perimeter
G1 X115.695 Y114.794 E0.00786 ; perimeter
G1 X115.756 Y114.947 E0.00763 ; perimeter
G1 X115.745 Y115.106 E0.00735 ; perimeter
G1 X115.622 Y115.340 E0.01225 ; perimeter
G1 X115.399 Y115.585 E0.01535 ; perimeter
G1 X115.291 Y115.633 E0.00550 ; perimeter
G1 X115.134 Y115.559 F10800.000 ; move inwards before travel
G1 X113.639 Y115.267 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.3695
G1 F2400.000
G1 X113.428 Y115.209 E0.00594 ; infill
G1 X113.351 Y115.166 E0.00240 ; infill
G1 X112.925 Y114.815 E0.01499 ; infill
G1 X112.698 Y114.657 E0.00750 ; infill
;WIDTH:0.346888
G1 X112.459 Y114.502 E0.00721 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.698 Y114.657 E-0.07528 ; wipe and retract
;WIPE_END
G1 E-2.32472 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X115.162 Y111.015 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.124 Y110.828 E0.00883 ; perimeter
G1 X115.161 Y110.618 E0.00988 ; perimeter
G1 X115.215 Y110.520 E0.00517 ; perimeter
G1 X115.317 Y110.438 E0.00607 ; perimeter
G1 X115.520 Y110.375 E0.00985 ; perimeter
G1 X115.676 Y110.418 E0.00752 ; perimeter
G1 X115.841 Y110.570 E0.01041 ; perimeter
G1 X115.901 Y110.830 E0.01234 ; perimeter
G1 X115.890 Y110.933 E0.00481 ; perimeter
G1 X115.821 Y111.104 E0.00856 ; perimeter
G1 X115.724 Y111.189 E0.00595 ; perimeter
G1 X115.597 Y111.236 E0.00627 ; perimeter
G1 X115.453 Y111.243 E0.00672 ; perimeter
G1 X115.255 Y111.156 E0.00999 ; perimeter
G1 X115.195 Y111.065 E0.00504 ; perimeter
G1 X115.271 Y110.859 F10800.000 ; move inwards before travel
G1 X115.523 Y110.867 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31246
G1 F2400.000
G1 X115.520 Y110.862 E0.00014 ; infill
;WIDTH:0.319747
G1 X115.517 Y110.856 E0.00014 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.520 Y110.862 E-0.00163 ; wipe and retract
;WIPE_END
G1 E-2.39837 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X115.394 Y106.077 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.582 Y106.078 E0.00874 ; perimeter
G1 X115.751 Y106.151 E0.00851 ; perimeter
G1 X115.823 Y106.231 E0.00498 ; perimeter
G1 X115.887 Y106.378 E0.00746 ; perimeter
G1 X115.902 Y106.590 E0.00985 ; perimeter
G1 X115.846 Y107.453 E0.04004 ; perimeter
G1 X115.756 Y107.855 E0.01907 ; perimeter
G1 X115.560 Y108.240 E0.02004 ; perimeter
G1 X115.508 Y108.276 E0.00291 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.465 Y108.265 E0.00184 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.372 Y108.144 E0.00706 ; perimeter
G1 X115.275 Y107.717 E0.02028 ; perimeter
G1 X115.208 Y107.543 E0.00865 ; perimeter
G1 X115.092 Y106.537 E0.04691 ; perimeter
G1 X115.141 Y106.296 E0.01139 ; perimeter
G1 X115.302 Y106.102 E0.01171 ; perimeter
G1 X115.336 Y106.093 E0.00160 ; perimeter
G1 X115.523 Y106.214 F10800.000 ; move inwards before travel
G1 X115.584 Y106.341 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33597
G1 F2400.000
G1 X115.503 Y106.467 E0.00364 ; infill
G1 X115.508 Y106.863 E0.00966 ; infill
;WIDTH:0.312104
G1 X115.515 Y107.135 E0.00608 ; infill
;WIDTH:0.263425
G1 X115.522 Y107.406 E0.00498 ; infill
;WIDTH:0.214747
G1 X115.509 Y107.653 E0.00353 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.522 Y107.406 E-0.06512 ; wipe and retract
;WIPE_END
G1 E-2.33488 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X114.185 Y101.177 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.062 Y101.208 E0.00591 ; perimeter
G1 X113.848 Y101.179 E0.00999 ; perimeter
G1 X113.743 Y101.132 E0.00532 ; perimeter
G1 X113.618 Y101.024 E0.00769 ; perimeter
G1 X113.534 Y100.872 E0.00800 ; perimeter
G1 X113.506 Y100.645 E0.01062 ; perimeter
G1 X113.531 Y100.532 E0.00534 ; perimeter
G1 X113.595 Y100.424 E0.00581 ; perimeter
G1 X113.636 Y100.390 E0.00250 ; perimeter
G1 X113.765 Y100.345 E0.00630 ; perimeter
G1 X113.953 Y100.352 E0.00875 ; perimeter
G1 X114.099 Y100.408 E0.00721 ; perimeter
G1 X114.313 Y100.620 E0.01396 ; perimeter
G1 X114.351 Y100.714 E0.00470 ; perimeter
G1 X114.346 Y100.990 E0.01278 ; perimeter
G1 X114.283 Y101.104 E0.00602 ; perimeter
G1 X114.234 Y101.141 E0.00288 ; perimeter
G1 X114.080 Y101.105 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.062 Y101.208 E-0.04867 ; wipe and retract
G1 X113.848 Y101.179 E-0.05689 ; wipe and retract
G1 X113.743 Y101.132 E-0.03032 ; wipe and retract
G1 X113.618 Y101.024 E-0.04378 ; wipe and retract
G1 X113.534 Y100.872 E-0.04559 ; wipe and retract
G1 X113.506 Y100.645 E-0.06051 ; wipe and retract
G1 X113.531 Y100.532 E-0.03039 ; wipe and retract
G1 X113.595 Y100.424 E-0.03311 ; wipe and retract
G1 X113.636 Y100.390 E-0.01424 ; wipe and retract
G1 X113.765 Y100.345 E-0.03587 ; wipe and retract
G1 X113.953 Y100.352 E-0.04985 ; wipe and retract
G1 X114.099 Y100.408 E-0.04110 ; wipe and retract
G1 X114.313 Y100.620 E-0.07956 ; wipe and retract
G1 X114.351 Y100.714 E-0.02678 ; wipe and retract
G1 X114.346 Y100.990 E-0.07283 ; wipe and retract
G1 X114.283 Y101.104 E-0.03427 ; wipe and retract
G1 X114.234 Y101.141 E-0.01638 ; wipe and retract
;WIPE_END
G1 E-1.67986 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X111.915 Y97.288 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.814 Y97.399 E0.00694 ; perimeter
G1 X111.540 Y97.473 E0.01315 ; perimeter
G1 X111.377 Y97.417 E0.00799 ; perimeter
G1 X110.434 Y96.495 E0.06106 ; perimeter
G1 X109.796 Y96.039 E0.03636 ; perimeter
G1 X109.302 Y95.846 E0.02456 ; perimeter
G1 X109.147 Y95.669 E0.01089 ; perimeter
G1 X109.071 Y95.489 E0.00907 ; perimeter
G1 X109.053 Y95.387 E0.00480 ; perimeter
G1 X109.099 Y95.243 E0.00699 ; perimeter
G1 X109.221 Y95.132 E0.00764 ; perimeter
G1 X109.391 Y95.082 E0.00821 ; perimeter
G1 X109.575 Y95.084 E0.00855 ; perimeter
G1 X109.827 Y95.157 E0.01213 ; perimeter
G1 X110.123 Y95.327 E0.01582 ; perimeter
G1 X110.565 Y95.695 E0.02667 ; perimeter
G1 X111.389 Y96.287 E0.04696 ; perimeter
G1 X111.645 Y96.505 E0.01560 ; perimeter
G1 X111.841 Y96.720 E0.01348 ; perimeter
G1 X111.943 Y96.974 E0.01268 ; perimeter
G1 X111.941 Y97.234 E0.01203 ; perimeter
G1 X111.766 Y97.299 F10800.000 ; move inwards before travel
G1 X111.700 Y97.167 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.39917
G1 F2400.000
G1 X111.136 Y96.609 E0.02348 ; infill
;WIDTH:0.37892
G1 X110.906 Y96.416 E0.00841 ; infill
;WIDTH:0.333467
G1 X110.675 Y96.222 E0.00727 ; infill
;WIDTH:0.288014
G1 X109.896 Y95.653 E0.01966 ; infill
;WIDTH:0.390576
G1 X109.544 Y95.501 E0.01110 ; infill
;WIDTH:0.37942
G1 X109.516 Y95.483 E0.00092 ; infill
;WIDTH:0.360963
G1 X109.474 Y95.464 E0.00121 ; infill
;WIDTH:0.323658
G1 X109.325 Y95.364 E0.00420 ; infill
G1 X109.302 Y95.410 F10800.000 ; move to first infill point
;WIDTH:0.147627
G1 F2400.000
G1 X109.355 Y95.407 E0.00046 ; infill
;WIDTH:0.188214
G1 X110.019 Y95.553 E0.00821 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.355 Y95.407 E-0.17940 ; wipe and retract
;WIPE_END
G1 E-2.22060 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X106.812 Y94.698 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.744 Y94.835 E0.00711 ; perimeter
G1 X106.544 Y94.977 E0.01134 ; perimeter
G1 X106.333 Y95.026 E0.01004 ; perimeter
G1 X106.229 Y95.031 E0.00483 ; perimeter
G1 X105.982 Y94.887 E0.01325 ; perimeter
G1 X105.933 Y94.876 E0.00231 ; perimeter
G1 X105.874 Y94.827 E0.00355 ; perimeter
G1 X105.766 Y94.638 E0.01010 ; perimeter
G1 X105.788 Y94.567 E0.00342 ; perimeter
G1 X105.934 Y94.465 E0.00824 ; perimeter
G1 X105.975 Y94.397 E0.00371 ; perimeter
G1 X106.143 Y94.302 E0.00892 ; perimeter
G1 X106.276 Y94.282 E0.00622 ; perimeter
G1 X106.504 Y94.291 E0.01055 ; perimeter
G1 X106.617 Y94.325 E0.00548 ; perimeter
G1 X106.685 Y94.372 E0.00382 ; perimeter
G1 X106.792 Y94.532 E0.00894 ; perimeter
G1 X106.823 Y94.640 E0.00517 ; perimeter
G1 X106.667 Y94.749 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.744 Y94.835 E-0.05564 ; wipe and retract
G1 X106.544 Y94.977 E-0.06462 ; wipe and retract
G1 X106.333 Y95.026 E-0.05717 ; wipe and retract
G1 X106.229 Y95.031 E-0.02751 ; wipe and retract
G1 X105.982 Y94.887 E-0.07548 ; wipe and retract
G1 X105.933 Y94.876 E-0.01318 ; wipe and retract
G1 X105.874 Y94.827 E-0.02021 ; wipe and retract
G1 X105.766 Y94.638 E-0.05751 ; wipe and retract
G1 X105.788 Y94.567 E-0.01946 ; wipe and retract
G1 X105.934 Y94.465 E-0.04696 ; wipe and retract
G1 X105.975 Y94.397 E-0.02114 ; wipe and retract
G1 X106.143 Y94.302 E-0.05080 ; wipe and retract
G1 X106.276 Y94.282 E-0.03543 ; wipe and retract
G1 X106.504 Y94.291 E-0.06010 ; wipe and retract
G1 X106.617 Y94.325 E-0.03124 ; wipe and retract
G1 X106.685 Y94.372 E-0.02174 ; wipe and retract
G1 X106.792 Y94.532 E-0.05094 ; wipe and retract
G1 X106.823 Y94.640 E-0.02945 ; wipe and retract
;WIPE_END
G1 E-1.66142 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X101.731 Y95.906 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.695 Y95.851 E0.00306 ; perimeter
G1 X101.582 Y95.790 E0.00594 ; perimeter
G1 X101.539 Y95.670 E0.00588 ; perimeter
G1 X101.548 Y95.580 E0.00422 ; perimeter
G1 X101.519 Y95.382 E0.00924 ; perimeter
G1 X101.584 Y95.249 E0.00689 ; perimeter
G1 X101.869 Y95.005 E0.01735 ; perimeter
G1 X102.530 Y94.659 E0.03457 ; perimeter
G1 X103.066 Y94.341 E0.02886 ; perimeter
G1 X103.412 Y94.164 E0.01802 ; perimeter
G1 X103.633 Y94.096 E0.01070 ; perimeter
G1 X103.899 Y94.081 E0.01233 ; perimeter
G1 X104.205 Y94.139 E0.01446 ; perimeter
G1 X104.273 Y94.167 E0.00337 ; perimeter
G1 X104.551 Y94.370 E0.01598 ; perimeter
G1 X104.689 Y94.606 E0.01262 ; perimeter
G1 X104.542 Y94.753 E0.00964 ; perimeter
G1 X104.261 Y94.884 E0.01437 ; perimeter
G1 X104.028 Y94.929 E0.01096 ; perimeter
G1 X103.748 Y94.910 E0.01303 ; perimeter
G1 X103.546 Y94.968 E0.00974 ; perimeter
G1 X103.362 Y94.978 E0.00853 ; perimeter
G1 X102.989 Y95.117 E0.01842 ; perimeter
G1 X102.784 Y95.279 E0.01211 ; perimeter
G1 X102.405 Y95.750 E0.02801 ; perimeter
G1 X102.176 Y95.911 E0.01298 ; perimeter
G1 X102.116 Y95.939 E0.00305 ; perimeter
G1 X101.900 Y95.957 E0.01006 ; perimeter
G1 X101.789 Y95.923 E0.00537 ; perimeter
G1 X101.742 Y95.841 F10800.000 ; move inwards before travel
G1 X101.983 Y95.508 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.442878
G1 F2400.000
G1 X101.983 Y95.507 E0.00003 ; infill
;WIDTH:0.459051
G1 X101.989 Y95.493 E0.00053 ; infill
;WIDTH:0.471724
G1 X102.091 Y95.414 E0.00458 ; infill
G1 X102.586 Y94.902 E0.02542 ; infill
G1 X102.534 Y95.043 F10800.000 ; move to first infill point
;WIDTH:0.186499
G1 F2400.000
G1 X102.844 Y94.837 E0.00445 ; infill
;WIDTH:0.225433
G1 X103.040 Y94.743 E0.00330 ; infill
;WIDTH:0.269082
G1 X103.273 Y94.633 E0.00483 ; infill
;WIDTH:0.278573
G1 X104.058 Y94.356 E0.01632 ; infill
G1 X104.343 Y94.516 F10800.000 ; move to first infill point
;WIDTH:0.379456
G1 F2400.000
G1 X103.733 Y94.500 E0.01706 ; infill
G1 X103.565 Y94.541 E0.00487 ; infill
;WIDTH:0.371531
G1 X103.479 Y94.574 E0.00250 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.565 Y94.541 E-0.02416 ; wipe and retract
;WIPE_END
G1 E-2.37584 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X100.613 Y104.113 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.428 Y104.015 E0.00971 ; perimeter
G1 X100.235 Y103.767 E0.01455 ; perimeter
G1 X100.170 Y103.603 E0.00815 ; perimeter
G1 X100.083 Y103.221 E0.01815 ; perimeter
G1 X100.029 Y102.800 E0.01968 ; perimeter
G1 X100.091 Y102.563 E0.01133 ; perimeter
G1 X100.072 Y102.115 E0.02080 ; perimeter
G1 X100.103 Y101.975 E0.00666 ; perimeter
G1 X99.857 Y101.348 E0.03118 ; perimeter
G1 X99.748 Y100.984 E0.01761 ; perimeter
G1 X99.726 Y100.752 E0.01077 ; perimeter
G1 X99.747 Y100.453 E0.01389 ; perimeter
G1 X99.900 Y99.953 E0.02424 ; perimeter
G1 X99.945 Y99.558 E0.01841 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X99.938 Y99.480 E0.00326 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X99.935 Y99.437 E0.00201 ; perimeter
G1 X99.747 Y99.027 E0.02090 ; perimeter
G1 X99.493 Y98.158 E0.04192 ; perimeter
G1 X99.534 Y97.844 E0.01470 ; perimeter
G1 X99.654 Y97.641 E0.01089 ; perimeter
G1 X99.815 Y97.486 E0.01036 ; perimeter
G1 X100.022 Y97.395 E0.01049 ; perimeter
G1 X100.264 Y97.371 E0.01124 ; perimeter
G1 X100.482 Y97.417 E0.01035 ; perimeter
G1 X100.519 Y97.496 E0.00400 ; perimeter
G1 X100.577 Y97.538 E0.00336 ; perimeter
G1 X100.610 Y97.677 E0.00659 ; perimeter
G1 X100.385 Y98.272 E0.02948 ; perimeter
G1 X100.264 Y98.710 E0.02103 ; perimeter
G1 X100.194 Y99.139 E0.02014 ; perimeter
G1 X100.213 Y99.441 E0.01400 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.203 Y99.630 E0.00791 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.252 Y99.851 E0.01049 ; perimeter
G1 X100.320 Y99.927 E0.00477 ; perimeter
G1 X100.464 Y100.265 E0.01701 ; perimeter
G1 X100.522 Y100.578 E0.01474 ; perimeter
G1 X100.536 Y100.982 E0.01873 ; perimeter
G1 X100.484 Y101.263 E0.01323 ; perimeter
G1 X100.484 Y101.428 E0.00765 ; perimeter
G1 X100.337 Y101.891 E0.02246 ; perimeter
G1 X100.449 Y102.169 E0.01388 ; perimeter
G1 X100.539 Y102.325 E0.00839 ; perimeter
G1 X100.583 Y102.508 E0.00869 ; perimeter
G1 X100.755 Y102.669 E0.01093 ; perimeter
G1 X100.852 Y102.920 E0.01243 ; perimeter
G1 X100.900 Y103.106 E0.00892 ; perimeter
G1 X100.968 Y103.396 E0.01379 ; perimeter
G1 X100.917 Y103.853 E0.02129 ; perimeter
G1 X100.904 Y104.265 E0.01910 ; perimeter
G1 X101.142 Y104.624 E0.01996 ; perimeter
G1 X101.275 Y104.721 E0.00763 ; perimeter
G1 X101.448 Y104.917 E0.01209 ; perimeter
G1 X101.866 Y105.484 E0.03264 ; perimeter
G1 X102.451 Y106.155 E0.04124 ; perimeter
G1 X102.807 Y106.373 E0.01934 ; perimeter
G1 X103.112 Y106.588 E0.01728 ; perimeter
G1 X103.419 Y106.885 E0.01979 ; perimeter
G1 X103.555 Y107.164 E0.01436 ; perimeter
G1 X103.599 Y107.520 E0.01666 ; perimeter
G1 X103.555 Y107.599 E0.00417 ; perimeter
G1 X103.353 Y107.615 E0.00939 ; perimeter
G1 X103.104 Y107.555 E0.01183 ; perimeter
G1 X102.900 Y107.460 E0.01043 ; perimeter
G1 X102.455 Y107.083 E0.02701 ; perimeter
G1 X102.173 Y106.714 E0.02152 ; perimeter
G1 X101.809 Y106.298 E0.02560 ; perimeter
G1 X101.301 Y105.867 E0.03087 ; perimeter
G1 X100.869 Y105.544 E0.02497 ; perimeter
G1 X100.760 Y105.406 E0.00816 ; perimeter
G1 X100.669 Y105.202 E0.01035 ; perimeter
G1 X100.689 Y104.818 E0.01782 ; perimeter
G1 X100.771 Y104.638 E0.00913 ; perimeter
G1 X100.674 Y104.419 E0.01111 ; perimeter
G1 X100.625 Y104.171 E0.01169 ; perimeter
G1 X100.660 Y103.908 F10800.000 ; move inwards before travel
G1 X100.572 Y103.797 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.384851
G1 F2400.000
G1 X100.551 Y103.421 E0.01072 ; infill
G1 X100.467 Y103.044 E0.01098 ; infill
;WIDTH:0.36807
G1 X100.363 Y102.631 E0.01151 ; infill
G1 X100.226 Y101.444 F10800.000 ; move to first infill point
;WIDTH:0.351832
G1 F2400.000
G1 X100.138 Y100.908 E0.01394 ; infill
G1 X100.101 Y100.122 E0.02022 ; infill
G1 X99.947 Y98.852 F10800.000 ; move to first infill point
;WIDTH:0.470542
G1 F2400.000
G1 X99.957 Y98.117 E0.02613 ; infill
;WIDTH:0.500031
G1 X99.987 Y98.000 E0.00460 ; infill
G1 X100.172 Y97.623 E0.01596 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.987 Y98.000 E-0.11083 ; wipe and retract
G1 X99.957 Y98.117 E-0.03195 ; wipe and retract
;WIPE_END
G1 E-2.25722 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 X100.926 Y104.903 ; move to first infill point
G1 Z22.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.349717
G1 F2400.000
G1 X101.180 Y105.261 E0.01120 ; infill
G1 X101.406 Y105.485 E0.00812 ; infill
;WIDTH:0.254776
G1 X101.605 Y105.689 E0.00502 ; infill
;WIDTH:0.139465
G1 X102.010 Y106.089 E0.00457 ; infill
G1 X102.269 Y106.383 E0.00315 ; infill
;WIDTH:0.169183
G1 X102.344 Y106.446 E0.00103 ; infill
;WIDTH:0.200681
G1 X102.423 Y106.513 E0.00136 ; infill
;WIDTH:0.246269
G1 X102.515 Y106.596 E0.00209 ; infill
;WIDTH:0.291857
G1 X102.606 Y106.679 E0.00256 ; infill
;WIDTH:0.321632
G1 X102.677 Y106.747 E0.00228 ; infill
;WIDTH:0.342933
G1 X103.098 Y107.118 E0.01400 ; infill
G1 X103.286 Y107.351 E0.00745 ; infill
;LAYER_CHANGE
;Z:22.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;22.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.098 Y107.118 E-0.07885 ; wipe and retract
G1 X102.677 Y106.747 E-0.14808 ; wipe and retract
;WIPE_END
G1 E-2.17307 F2400.000 ; retract
G1 Z22.075 F10800.000 ; lift Z
G1 Z22.200 ; move to next layer (110)
;AFTER_LAYER_CHANGE
;22.2
G1 Z22.275 ; lift Z
G1 X105.348 Y108.632 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.401 Y108.601 E0.00281 ; perimeter
G1 X105.604 Y108.551 E0.00971 ; perimeter
G1 X105.843 Y108.560 E0.01106 ; perimeter
G1 X106.121 Y108.621 E0.01321 ; perimeter
G1 X106.389 Y108.727 E0.01332 ; perimeter
G1 X106.829 Y109.010 E0.02426 ; perimeter
G1 X106.958 Y109.155 E0.00896 ; perimeter
G1 X107.039 Y109.310 E0.00811 ; perimeter
G1 X107.050 Y109.437 E0.00592 ; perimeter
G1 X106.989 Y109.528 E0.00506 ; perimeter
G1 X106.838 Y109.593 E0.00762 ; perimeter
G1 X106.660 Y109.609 E0.00824 ; perimeter
G1 X106.389 Y109.574 E0.01269 ; perimeter
G1 X105.932 Y109.401 E0.02263 ; perimeter
G1 X105.679 Y109.253 E0.01359 ; perimeter
G1 X105.523 Y109.119 E0.00951 ; perimeter
G1 X105.306 Y108.810 E0.01751 ; perimeter
G1 X105.300 Y108.744 E0.00303 ; perimeter
G1 X105.322 Y108.686 E0.00289 ; perimeter
G1 X105.407 Y108.647 F10800.000 ; move inwards before travel
G1 X105.636 Y108.862 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.307431
G1 F2400.000
G1 X105.953 Y108.967 E0.00734 ; infill
;WIDTH:0.317639
G1 X106.765 Y109.358 E0.02058 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.953 Y108.967 E-0.23780 ; wipe and retract
;WIPE_END
G1 E-2.16220 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X108.659 Y110.784 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.670 Y110.497 E0.01326 ; perimeter
G1 X108.787 Y110.417 E0.00659 ; perimeter
G1 X109.002 Y110.403 E0.00997 ; perimeter
G1 X109.169 Y110.446 E0.00802 ; perimeter
G1 X109.548 Y110.618 E0.01929 ; perimeter
G1 X110.020 Y110.948 E0.02665 ; perimeter
G1 X110.411 Y111.186 E0.02119 ; perimeter
G1 X110.695 Y111.450 E0.01799 ; perimeter
G1 X110.845 Y111.696 E0.01332 ; perimeter
G1 X110.847 Y111.890 E0.00897 ; perimeter
G1 X110.692 Y112.009 E0.00907 ; perimeter
G1 X110.347 Y111.982 E0.01602 ; perimeter
G1 X109.859 Y111.802 E0.02408 ; perimeter
G1 X109.565 Y111.625 E0.01594 ; perimeter
G1 X109.016 Y111.224 E0.03146 ; perimeter
G1 X108.794 Y110.988 E0.01503 ; perimeter
G1 X108.692 Y110.834 E0.00857 ; perimeter
G1 X108.873 Y110.594 F10800.000 ; move inwards before travel
G1 X108.921 Y110.650 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.244633
G1 F2400.000
G1 X109.063 Y110.775 E0.00318 ; infill
;WIDTH:0.291243
G1 X109.168 Y110.853 E0.00272 ; infill
;WIDTH:0.337852
G1 X109.274 Y110.932 E0.00323 ; infill
;WIDTH:0.351972
G1 X109.345 Y110.974 E0.00212 ; infill
;WIDTH:0.365633
G1 X109.384 Y110.995 E0.00119 ; infill
;WIDTH:0.374216
G1 X109.790 Y111.285 E0.01375 ; infill
G1 X110.036 Y111.434 E0.00792 ; infill
G1 X110.565 Y111.689 E0.01618 ; infill
G1 X111.557 Y112.608 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.622 Y112.647 E0.00354 ; perimeter
G1 X111.836 Y112.651 E0.00990 ; perimeter
G1 X111.942 Y112.690 E0.00525 ; perimeter
G1 X112.094 Y112.837 E0.00980 ; perimeter
G1 X112.162 Y113.009 E0.00858 ; perimeter
G1 X112.158 Y113.241 E0.01074 ; perimeter
G1 X112.059 Y113.444 E0.01047 ; perimeter
G1 X112.043 Y113.517 E0.00346 ; perimeter
G1 X111.977 Y113.603 E0.00502 ; perimeter
G1 X111.870 Y113.610 E0.00499 ; perimeter
G1 X111.633 Y113.560 E0.01123 ; perimeter
G1 X111.503 Y113.493 E0.00675 ; perimeter
G1 X111.381 Y113.364 E0.00823 ; perimeter
G1 X111.315 Y113.100 E0.01259 ; perimeter
G1 X111.348 Y112.804 E0.01382 ; perimeter
G1 X111.497 Y112.617 E0.01107 ; perimeter
G1 X111.595 Y112.674 F10800.000 ; move inwards before travel
G1 X112.462 Y114.310 ; move to first perimeter point
G1 F1800.000
G1 X112.514 Y114.280 E0.00278 ; perimeter
G1 X112.764 Y114.306 E0.01168 ; perimeter
G1 X113.110 Y114.420 E0.01686 ; perimeter
G1 X113.633 Y114.818 E0.03045 ; perimeter
G1 X114.003 Y115.247 E0.02620 ; perimeter
G1 X113.805 Y115.368 E0.01073 ; perimeter
G1 X113.607 Y115.549 E0.01243 ; perimeter
G1 X113.464 Y115.581 E0.00683 ; perimeter
G1 X113.276 Y115.564 E0.00872 ; perimeter
G1 X113.097 Y115.484 E0.00909 ; perimeter
G1 X112.522 Y114.999 E0.03484 ; perimeter
G1 X112.405 Y114.842 E0.00906 ; perimeter
G1 X112.357 Y114.732 E0.00556 ; perimeter
G1 X112.357 Y114.472 E0.01205 ; perimeter
G1 X112.411 Y114.341 E0.00657 ; perimeter
G1 X112.520 Y114.325 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.514 Y114.280 E-0.03152 ; wipe and retract
G1 X112.764 Y114.306 E-0.06653 ; wipe and retract
G1 X113.110 Y114.420 E-0.09605 ; wipe and retract
G1 X113.633 Y114.818 E-0.17348 ; wipe and retract
G1 X114.003 Y115.247 E-0.14929 ; wipe and retract
G1 X113.805 Y115.368 E-0.06114 ; wipe and retract
G1 X113.607 Y115.549 E-0.07082 ; wipe and retract
G1 X113.464 Y115.581 E-0.03889 ; wipe and retract
G1 X113.276 Y115.564 E-0.04966 ; wipe and retract
G1 X113.097 Y115.484 E-0.05176 ; wipe and retract
G1 X112.522 Y114.999 E-0.19847 ; wipe and retract
G1 X112.405 Y114.842 E-0.05160 ; wipe and retract
G1 X112.357 Y114.732 E-0.03166 ; wipe and retract
G1 X112.357 Y114.472 E-0.06867 ; wipe and retract
G1 X112.411 Y114.341 E-0.03740 ; wipe and retract
;WIPE_END
G1 E-1.22306 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X115.752 Y114.956 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.740 Y115.106 E0.00698 ; perimeter
G1 X115.657 Y115.289 E0.00929 ; perimeter
G1 X115.429 Y115.556 E0.01626 ; perimeter
G1 X115.245 Y115.636 E0.00930 ; perimeter
G1 X115.104 Y115.643 E0.00652 ; perimeter
G1 X114.919 Y115.580 E0.00906 ; perimeter
G1 X114.846 Y115.540 E0.00385 ; perimeter
G1 X114.601 Y115.300 E0.01591 ; perimeter
G1 X114.891 Y114.868 E0.02412 ; perimeter
G1 X115.065 Y114.704 E0.01108 ; perimeter
G1 X115.177 Y114.645 E0.00586 ; perimeter
G1 X115.289 Y114.624 E0.00525 ; perimeter
G1 X115.459 Y114.635 E0.00789 ; perimeter
G1 X115.573 Y114.679 E0.00565 ; perimeter
G1 X115.647 Y114.742 E0.00450 ; perimeter
G1 X115.734 Y114.899 E0.00833 ; perimeter
G1 X115.633 Y115.049 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.740 Y115.106 E-0.05473 ; wipe and retract
G1 X115.657 Y115.289 E-0.05293 ; wipe and retract
G1 X115.429 Y115.556 E-0.09261 ; wipe and retract
G1 X115.245 Y115.636 E-0.05299 ; wipe and retract
G1 X115.104 Y115.643 E-0.03712 ; wipe and retract
G1 X114.919 Y115.580 E-0.05163 ; wipe and retract
G1 X114.846 Y115.540 E-0.02193 ; wipe and retract
G1 X114.601 Y115.300 E-0.09063 ; wipe and retract
G1 X114.891 Y114.868 E-0.13739 ; wipe and retract
G1 X115.065 Y114.704 E-0.06315 ; wipe and retract
G1 X115.177 Y114.645 E-0.03340 ; wipe and retract
G1 X115.289 Y114.624 E-0.02990 ; wipe and retract
G1 X115.459 Y114.635 E-0.04498 ; wipe and retract
G1 X115.573 Y114.679 E-0.03221 ; wipe and retract
G1 X115.647 Y114.742 E-0.02563 ; wipe and retract
G1 X115.734 Y114.899 E-0.04746 ; wipe and retract
;WIPE_END
G1 E-1.53131 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X113.562 Y115.264 ; move to first infill point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.414149
G1 F2400.000
G1 X113.327 Y115.119 E0.00853 ; infill
G1 X112.923 Y114.795 E0.01597 ; infill
;WIDTH:0.389325
G1 X112.761 Y114.704 E0.00537 ; infill
;WIDTH:0.363895
G1 X112.598 Y114.613 E0.00497 ; infill
G1 X112.670 Y114.793 F10800.000 ; move to first infill point
;WIDTH:0.386461
G1 F2400.000
G1 X113.425 Y115.181 E0.02425 ; infill
;WIDTH:0.350225
G1 X113.450 Y115.256 E0.00203 ; infill
;WIDTH:0.30364
G1 X113.476 Y115.331 E0.00172 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.450 Y115.256 E-0.02093 ; wipe and retract
;WIPE_END
G1 E-2.37907 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X115.523 Y110.302 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.674 Y110.351 E0.00736 ; perimeter
G1 X115.831 Y110.487 E0.00961 ; perimeter
G1 X115.902 Y110.781 E0.01399 ; perimeter
G1 X115.824 Y111.049 E0.01293 ; perimeter
G1 X115.727 Y111.135 E0.00602 ; perimeter
G1 X115.562 Y111.191 E0.00806 ; perimeter
G1 X115.452 Y111.196 E0.00511 ; perimeter
G1 X115.254 Y111.098 E0.01024 ; perimeter
G1 X115.167 Y110.975 E0.00698 ; perimeter
G1 X115.122 Y110.766 E0.00987 ; perimeter
G1 X115.152 Y110.533 E0.01089 ; perimeter
G1 X115.181 Y110.490 E0.00240 ; perimeter
G1 X115.291 Y110.381 E0.00717 ; perimeter
G1 X115.466 Y110.321 E0.00859 ; perimeter
G1 X115.596 Y110.443 F10800.000 ; move inwards before travel
G1 X115.514 Y110.810 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.318243
G1 F2400.000
G1 X115.503 Y110.698 E0.00257 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.514 Y110.810 E-0.02958 ; wipe and retract
;WIPE_END
G1 E-2.37042 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X115.411 Y106.032 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.588 Y106.041 E0.00824 ; perimeter
G1 X115.730 Y106.097 E0.00708 ; perimeter
G1 X115.819 Y106.183 E0.00573 ; perimeter
G1 X115.882 Y106.315 E0.00677 ; perimeter
G1 X115.907 Y106.597 E0.01310 ; perimeter
G1 X115.837 Y107.877 E0.05940 ; perimeter
G1 X115.739 Y108.405 E0.02484 ; perimeter
G1 X115.610 Y108.706 E0.01519 ; perimeter
G1 X115.546 Y108.769 E0.00415 ; perimeter
G1 X115.441 Y108.739 E0.00505 ; perimeter
G1 X115.354 Y108.604 E0.00746 ; perimeter
G1 X115.174 Y107.749 E0.04047 ; perimeter
G1 X115.085 Y106.491 E0.05839 ; perimeter
G1 X115.135 Y106.295 E0.00937 ; perimeter
G1 X115.308 Y106.080 E0.01280 ; perimeter
G1 X115.357 Y106.057 E0.00247 ; perimeter
G1 X115.531 Y106.162 F10800.000 ; move inwards before travel
G1 X115.515 Y106.282 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.371044
G1 F2400.000
G1 X115.494 Y106.520 E0.00651 ; infill
G1 X115.503 Y106.970 E0.01229 ; infill
;WIDTH:0.327092
G1 X115.506 Y107.336 E0.00865 ; infill
;WIDTH:0.281429
G1 X115.509 Y107.702 E0.00726 ; infill
;WIDTH:0.235768
G1 X115.519 Y107.839 E0.00221 ; infill
;WIDTH:0.199804
G1 X115.520 Y107.937 E0.00127 ; infill
;WIDTH:0.16551
G1 X115.522 Y108.034 E0.00099 ; infill
;WIDTH:0.131215
G1 X115.523 Y108.132 E0.00072 ; infill
G1 X115.517 Y106.412 F10800.000 ; move to first infill point
;WIDTH:0.302704
G1 F2400.000
G1 X115.519 Y106.409 E0.00009 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.517 Y106.412 E-0.00104 ; wipe and retract
;WIPE_END
G1 E-2.39896 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X114.122 Y101.109 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.010 Y101.134 E0.00531 ; perimeter
G1 X113.784 Y101.107 E0.01055 ; perimeter
G1 X113.603 Y101.000 E0.00973 ; perimeter
G1 X113.535 Y100.923 E0.00474 ; perimeter
G1 X113.486 Y100.834 E0.00475 ; perimeter
G1 X113.443 Y100.587 E0.01161 ; perimeter
G1 X113.460 Y100.464 E0.00573 ; perimeter
G1 X113.559 Y100.322 E0.00802 ; perimeter
G1 X113.703 Y100.262 E0.00726 ; perimeter
G1 X113.752 Y100.281 E0.00242 ; perimeter
G1 X113.936 Y100.289 E0.00852 ; perimeter
G1 X114.065 Y100.355 E0.00673 ; perimeter
G1 X114.263 Y100.569 E0.01354 ; perimeter
G1 X114.295 Y100.652 E0.00413 ; perimeter
G1 X114.294 Y100.901 E0.01152 ; perimeter
G1 X114.226 Y101.030 E0.00674 ; perimeter
G1 X114.170 Y101.073 E0.00329 ; perimeter
G1 X114.028 Y101.044 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.010 Y101.134 E-0.04514 ; wipe and retract
G1 X113.784 Y101.107 E-0.06009 ; wipe and retract
G1 X113.603 Y101.000 E-0.05541 ; wipe and retract
G1 X113.535 Y100.923 E-0.02700 ; wipe and retract
G1 X113.486 Y100.834 E-0.02706 ; wipe and retract
G1 X113.443 Y100.587 E-0.06612 ; wipe and retract
G1 X113.460 Y100.464 E-0.03266 ; wipe and retract
G1 X113.559 Y100.322 E-0.04571 ; wipe and retract
G1 X113.703 Y100.262 E-0.04137 ; wipe and retract
G1 X113.752 Y100.281 E-0.01376 ; wipe and retract
G1 X113.936 Y100.289 E-0.04855 ; wipe and retract
G1 X114.065 Y100.355 E-0.03832 ; wipe and retract
G1 X114.263 Y100.569 E-0.07712 ; wipe and retract
G1 X114.295 Y100.652 E-0.02352 ; wipe and retract
G1 X114.294 Y100.901 E-0.06562 ; wipe and retract
G1 X114.226 Y101.030 E-0.03842 ; wipe and retract
G1 X114.170 Y101.073 E-0.01876 ; wipe and retract
;WIPE_END
G1 E-1.67537 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X111.820 Y97.533 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.728 Y97.568 E0.00457 ; perimeter
G1 X111.571 Y97.585 E0.00730 ; perimeter
G1 X111.402 Y97.502 E0.00873 ; perimeter
G1 X111.188 Y97.294 E0.01381 ; perimeter
G1 X111.012 Y97.034 E0.01453 ; perimeter
G1 X110.591 Y96.661 E0.02607 ; perimeter
G1 X110.096 Y96.271 E0.02920 ; perimeter
G1 X109.705 Y96.024 E0.02144 ; perimeter
G1 X109.439 Y95.920 E0.01323 ; perimeter
G1 X109.241 Y95.709 E0.01340 ; perimeter
G1 X109.241 Y95.567 E0.00657 ; perimeter
G1 X109.187 Y95.451 E0.00591 ; perimeter
G1 X109.246 Y95.269 E0.00886 ; perimeter
G1 X109.349 Y95.180 E0.00634 ; perimeter
G1 X109.472 Y95.138 E0.00600 ; perimeter
G1 X109.624 Y95.125 E0.00709 ; perimeter
G1 X109.964 Y95.213 E0.01628 ; perimeter
G1 X110.206 Y95.366 E0.01323 ; perimeter
G1 X110.667 Y95.710 E0.02667 ; perimeter
G1 X111.069 Y96.037 E0.02398 ; perimeter
G1 X111.285 Y96.246 E0.01393 ; perimeter
G1 X111.517 Y96.409 E0.01314 ; perimeter
G1 X111.838 Y96.768 E0.02231 ; perimeter
G1 X111.933 Y96.996 E0.01145 ; perimeter
G1 X111.936 Y97.284 E0.01333 ; perimeter
G1 X111.845 Y97.478 E0.00993 ; perimeter
G1 X111.728 Y97.499 F10800.000 ; move inwards before travel
G1 X111.655 Y97.311 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.393096
G1 F2400.000
G1 X111.473 Y96.973 E0.01118 ; infill
G1 X111.326 Y96.786 E0.00691 ; infill
;WIDTH:0.35774
G1 X111.048 Y96.551 E0.00952 ; infill
;WIDTH:0.331895
G1 X110.808 Y96.331 E0.00783 ; infill
G1 X110.331 Y95.953 E0.01464 ; infill
G1 X109.905 Y95.663 E0.01236 ; infill
G1 X109.649 Y95.548 E0.00675 ; infill
G1 X109.612 Y95.499 E0.00147 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.649 Y95.548 E-0.01617 ; wipe and retract
G1 X109.905 Y95.663 E-0.07417 ; wipe and retract
G1 X110.331 Y95.953 E-0.13571 ; wipe and retract
G1 X110.808 Y96.331 E-0.16078 ; wipe and retract
G1 X111.048 Y96.551 E-0.08594 ; wipe and retract
;WIPE_END
G1 E-1.92723 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X102.926 Y95.024 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.864 Y95.215 E0.00931 ; perimeter
G1 X102.631 Y95.518 E0.01770 ; perimeter
G1 X102.497 Y95.787 E0.01390 ; perimeter
G1 X102.396 Y95.890 E0.00667 ; perimeter
G1 X102.059 Y96.064 E0.01760 ; perimeter
G1 X101.783 Y96.101 E0.01291 ; perimeter
G1 X101.747 Y96.080 E0.00190 ; perimeter
G1 X101.654 Y95.943 E0.00768 ; perimeter
G1 X101.658 Y95.877 E0.00305 ; perimeter
G1 X101.593 Y95.626 E0.01205 ; perimeter
G1 X101.615 Y95.426 E0.00930 ; perimeter
G1 X101.720 Y95.223 E0.01061 ; perimeter
G1 X101.826 Y95.132 E0.00647 ; perimeter
G1 X102.300 Y94.905 E0.02434 ; perimeter
G1 X102.771 Y94.722 E0.02342 ; perimeter
G1 X102.902 Y94.618 E0.00775 ; perimeter
G1 X103.254 Y94.436 E0.01834 ; perimeter
G1 X103.337 Y94.329 E0.00626 ; perimeter
G1 X103.384 Y94.298 E0.00264 ; perimeter
G1 X103.613 Y94.181 E0.01190 ; perimeter
G1 X103.766 Y94.123 E0.00758 ; perimeter
G1 X104.160 Y94.115 E0.01823 ; perimeter
G1 X104.359 Y94.152 E0.00942 ; perimeter
G1 X104.545 Y94.216 E0.00910 ; perimeter
G1 X104.867 Y94.421 E0.01768 ; perimeter
G1 X105.191 Y94.493 E0.01536 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.281 Y94.513 E0.00389 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.486 Y94.558 E0.00968 ; perimeter
G1 X105.689 Y94.420 E0.01137 ; perimeter
G1 X105.904 Y94.401 E0.01002 ; perimeter
G1 X106.094 Y94.295 E0.01005 ; perimeter
G1 X106.288 Y94.279 E0.00905 ; perimeter
G1 X106.461 Y94.291 E0.00802 ; perimeter
G1 X106.596 Y94.335 E0.00656 ; perimeter
G1 X106.653 Y94.379 E0.00335 ; perimeter
G1 X106.778 Y94.617 E0.01245 ; perimeter
G1 X106.757 Y94.747 E0.00608 ; perimeter
G1 X106.693 Y94.872 E0.00649 ; perimeter
G1 X106.582 Y94.961 E0.00659 ; perimeter
G1 X106.350 Y95.033 E0.01128 ; perimeter
G1 X106.184 Y95.041 E0.00768 ; perimeter
G1 X106.077 Y94.970 E0.00595 ; perimeter
G1 X105.893 Y94.929 E0.00871 ; perimeter
G1 X105.787 Y94.841 E0.00640 ; perimeter
G1 X105.307 Y94.677 E0.02348 ; perimeter
G1 X105.254 Y94.691 E0.00253 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.203 Y94.703 E0.00220 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.810 Y94.800 E0.01875 ; perimeter
G1 X104.452 Y94.923 E0.01751 ; perimeter
G1 X104.143 Y94.955 E0.01443 ; perimeter
G1 X103.831 Y94.925 E0.01452 ; perimeter
G1 X103.758 Y94.885 E0.00387 ; perimeter
G1 X103.312 Y94.862 E0.02067 ; perimeter
G1 X102.981 Y95.001 E0.01664 ; perimeter
G1 X102.727 Y94.993 F10800.000 ; move inwards before travel
G1 X102.625 Y95.038 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323097
G1 F2400.000
G1 X101.865 Y95.717 E0.02373 ; infill
G1 X101.883 Y95.783 F10800.000 ; move to first infill point
;WIDTH:0.500111
G1 F2400.000
G1 X102.099 Y95.522 E0.01291 ; infill
G1 X102.600 Y95.163 E0.02341 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.099 Y95.522 E-0.16251 ; wipe and retract
G1 X101.883 Y95.783 E-0.08962 ; wipe and retract
;WIPE_END
G1 E-2.14787 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X104.608 Y94.615 ; move to first infill point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.347351
G1 F2400.000
G1 X103.840 Y94.505 E0.01964 ; infill
;WIDTH:0.327314
G1 X103.464 Y94.559 E0.00898 ; infill
G1 X103.501 Y94.511 F10800.000 ; move to first infill point
;WIDTH:0.306317
G1 F2400.000
G1 X104.626 Y94.553 E0.02465 ; infill
G1 X106.287 Y94.658 F10800.000 ; move to first infill point
;WIDTH:0.276359
G1 F2400.000
G1 X106.415 Y94.654 E0.00248 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.287 Y94.658 E-0.03367 ; wipe and retract
;WIPE_END
G1 E-2.36633 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X100.576 Y97.290 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.737 Y97.280 E0.00746 ; perimeter
G1 X100.780 Y97.487 E0.00976 ; perimeter
G1 X100.731 Y97.676 E0.00906 ; perimeter
G1 X100.639 Y97.909 E0.01159 ; perimeter
G1 X100.467 Y98.159 E0.01407 ; perimeter
G1 X100.366 Y98.399 E0.01207 ; perimeter
G1 X100.306 Y98.780 E0.01784 ; perimeter
G1 X100.339 Y98.922 E0.00675 ; perimeter
G1 X100.326 Y99.120 E0.00919 ; perimeter
G1 X100.367 Y99.438 E0.01486 ; perimeter
G1 X100.379 Y99.746 E0.01428 ; perimeter
G1 X100.446 Y99.903 E0.00790 ; perimeter
G1 X100.521 Y100.330 E0.02012 ; perimeter
G1 X100.522 Y100.743 E0.01909 ; perimeter
G1 X100.455 Y101.084 E0.01611 ; perimeter
G1 X100.347 Y101.339 E0.01283 ; perimeter
G1 X100.197 Y101.426 E0.00804 ; perimeter
G1 X100.169 Y101.392 E0.00204 ; perimeter
G1 X100.024 Y101.356 E0.00693 ; perimeter
G1 X99.824 Y101.009 E0.01855 ; perimeter
G1 X99.746 Y100.777 E0.01132 ; perimeter
G1 X99.718 Y100.565 E0.00990 ; perimeter
G1 X99.735 Y100.346 E0.01020 ; perimeter
G1 X99.720 Y100.046 E0.01393 ; perimeter
G1 X99.778 Y99.770 E0.01304 ; perimeter
G1 X99.655 Y98.885 E0.04139 ; perimeter
G1 X99.556 Y98.530 E0.01709 ; perimeter
G1 X99.526 Y98.139 E0.01814 ; perimeter
G1 X99.540 Y98.023 E0.00540 ; perimeter
G1 X99.655 Y97.734 E0.01442 ; perimeter
G1 X99.926 Y97.420 E0.01921 ; perimeter
G1 X100.115 Y97.334 E0.00964 ; perimeter
G1 X100.339 Y97.266 E0.01084 ; perimeter
G1 X100.517 Y97.280 E0.00827 ; perimeter
G1 X100.667 Y97.424 F10800.000 ; move inwards before travel
G1 X100.411 Y97.507 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.465852
G1 F2400.000
G1 X100.060 Y97.950 E0.01987 ; infill
G1 X99.984 Y98.136 E0.00705 ; infill
G1 X99.844 Y98.667 E0.01932 ; infill
G1 X99.970 Y98.774 F10800.000 ; move to first infill point
;WIDTH:0.227718
G1 F2400.000
G1 X99.975 Y98.808 E0.00053 ; infill
;WIDTH:0.21955
G1 X100.008 Y99.123 E0.00464 ; infill
;WIDTH:0.195551
G1 X100.080 Y99.771 E0.00827 ; infill
;WIDTH:0.160004
G1 X100.080 Y99.825 E0.00053 ; infill
G1 X100.191 Y101.063 F10800.000 ; move to first infill point
;WIDTH:0.344663
G1 F2400.000
G1 X100.130 Y100.689 E0.00951 ; infill
G1 X100.128 Y100.361 E0.00823 ; infill
G1 X100.096 Y100.075 E0.00720 ; infill
;WIDTH:0.309016
G1 X100.110 Y99.322 E0.01667 ; infill
G1 X99.926 Y99.088 F10800.000 ; move to first infill point
;WIDTH:0.395939
G1 F2400.000
G1 X99.958 Y98.306 E0.02297 ; infill
;WIDTH:0.411562
G1 X100.022 Y97.672 E0.01952 ; infill
G1 X99.779 Y98.075 F10800.000 ; move to first infill point
;WIDTH:0.392439
G1 F2400.000
G1 X100.518 Y97.537 E0.02656 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X99.779 Y98.075 E-0.24112 ; wipe and retract
;WIPE_END
G1 E-2.15888 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 X100.963 Y104.474 ; move to first perimeter point
G1 Z22.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.038 Y104.563 E0.00537 ; perimeter
G1 X101.161 Y104.590 E0.00585 ; perimeter
G1 X101.288 Y104.691 E0.00749 ; perimeter
G1 X101.483 Y104.916 E0.01381 ; perimeter
G1 X101.887 Y105.450 E0.03099 ; perimeter
G1 X102.284 Y105.833 E0.02557 ; perimeter
G1 X102.473 Y106.054 E0.01346 ; perimeter
G1 X102.602 Y106.133 E0.00702 ; perimeter
G1 X102.908 Y106.395 E0.01865 ; perimeter
G1 X103.114 Y106.541 E0.01169 ; perimeter
G1 X103.268 Y106.720 E0.01094 ; perimeter
G1 X103.408 Y107.023 E0.01546 ; perimeter
G1 X103.375 Y107.217 E0.00912 ; perimeter
G1 X103.388 Y107.364 E0.00683 ; perimeter
G1 X103.299 Y107.426 E0.00501 ; perimeter
G1 X103.175 Y107.449 E0.00587 ; perimeter
G1 X102.954 Y107.416 E0.01034 ; perimeter
G1 X102.741 Y107.309 E0.01103 ; perimeter
G1 X102.127 Y106.766 E0.03800 ; perimeter
G1 X101.227 Y105.824 E0.06033 ; perimeter
G1 X100.934 Y105.601 E0.01704 ; perimeter
G1 X100.779 Y105.404 E0.01161 ; perimeter
G1 X100.679 Y105.149 E0.01270 ; perimeter
G1 X100.680 Y105.063 E0.00397 ; perimeter
G1 X100.742 Y104.906 E0.00785 ; perimeter
G1 X100.752 Y104.765 E0.00652 ; perimeter
G1 X100.930 Y104.524 E0.01389 ; perimeter
G1 X100.998 Y104.585 F10800.000 ; move inwards before travel
G1 X100.740 Y103.994 ; move to first perimeter point
G1 F1800.000
G1 X100.429 Y103.829 E0.01630 ; perimeter
G1 X100.220 Y103.610 E0.01402 ; perimeter
G1 X100.129 Y103.365 E0.01211 ; perimeter
G1 X100.070 Y102.876 E0.02283 ; perimeter
G1 X100.129 Y102.738 E0.00695 ; perimeter
G1 X100.168 Y102.580 E0.00755 ; perimeter
G1 X100.364 Y102.443 E0.01106 ; perimeter
G1 X100.425 Y102.443 E0.00284 ; perimeter
G1 X100.539 Y102.520 E0.00639 ; perimeter
G1 X100.767 Y102.737 E0.01456 ; perimeter
G1 X100.902 Y103.017 E0.01444 ; perimeter
G1 X100.961 Y103.288 E0.01281 ; perimeter
G1 X100.940 Y103.431 E0.00671 ; perimeter
G1 X100.762 Y103.938 E0.02489 ; perimeter
G1 X100.535 Y103.708 F10800.000 ; move inwards before travel
G1 X100.615 Y103.655 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.207971
G1 F2400.000
G1 X100.398 Y102.718 E0.01320 ; infill
G1 X100.367 Y102.780 F10800.000 ; move to first infill point
;WIDTH:0.311793
G1 F2400.000
G1 X100.458 Y102.961 E0.00454 ; infill
;WIDTH:0.344001
G1 X100.486 Y103.056 E0.00247 ; infill
;WIDTH:0.36242
G1 X100.544 Y103.303 E0.00675 ; infill
G1 X100.555 Y103.603 E0.00795 ; infill
G1 X100.984 Y104.908 F10800.000 ; move to first infill point
;WIDTH:0.412806
G1 F2400.000
G1 X101.154 Y105.190 E0.01011 ; infill
G1 X101.354 Y105.414 E0.00925 ; infill
;WIDTH:0.297159
G1 X101.618 Y105.701 E0.00825 ; infill
;WIDTH:0.305672
G1 X102.246 Y106.352 E0.01976 ; infill
;WIDTH:0.346889
G1 X102.370 Y106.452 E0.00403 ; infill
;WIDTH:0.357089
G1 X102.669 Y106.714 E0.01038 ; infill
;WIDTH:0.380141
G1 X102.836 Y106.846 E0.00597 ; infill
G1 X103.141 Y107.156 E0.01219 ; infill
;LAYER_CHANGE
;Z:22.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;22.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.836 Y106.846 E-0.11476 ; wipe and retract
G1 X102.669 Y106.714 E-0.05616 ; wipe and retract
;WIPE_END
G1 E-2.22908 F2400.000 ; retract
G1 Z22.275 F10800.000 ; lift Z
G1 Z22.400 ; move to next layer (111)
;AFTER_LAYER_CHANGE
;22.4
G1 Z22.475 ; lift Z
G1 X114.683 Y115.180 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.861 Y114.900 E0.01537 ; perimeter
G1 X115.060 Y114.710 E0.01273 ; perimeter
G1 X115.176 Y114.649 E0.00609 ; perimeter
G1 X115.284 Y114.628 E0.00508 ; perimeter
G1 X115.455 Y114.638 E0.00794 ; perimeter
G1 X115.566 Y114.683 E0.00553 ; perimeter
G1 X115.640 Y114.746 E0.00452 ; perimeter
G1 X115.713 Y114.857 E0.00616 ; perimeter
G1 X115.742 Y114.950 E0.00451 ; perimeter
G1 X115.731 Y115.116 E0.00768 ; perimeter
G1 X115.643 Y115.307 E0.00974 ; perimeter
G1 X115.437 Y115.540 E0.01443 ; perimeter
G1 X115.270 Y115.616 E0.00848 ; perimeter
G1 X115.107 Y115.620 E0.00757 ; perimeter
G1 X114.895 Y115.532 E0.01063 ; perimeter
G1 X114.688 Y115.312 E0.01396 ; perimeter
G1 X114.666 Y115.237 E0.00365 ; perimeter
G1 X114.997 Y115.074 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.861 Y114.900 E-0.10274 ; wipe and retract
G1 X115.060 Y114.710 E-0.07250 ; wipe and retract
G1 X115.176 Y114.649 E-0.03470 ; wipe and retract
G1 X115.284 Y114.628 E-0.02894 ; wipe and retract
G1 X115.455 Y114.638 E-0.04521 ; wipe and retract
G1 X115.566 Y114.683 E-0.03153 ; wipe and retract
G1 X115.640 Y114.746 E-0.02573 ; wipe and retract
G1 X115.713 Y114.857 E-0.03508 ; wipe and retract
G1 X115.742 Y114.950 E-0.02569 ; wipe and retract
G1 X115.731 Y115.116 E-0.04376 ; wipe and retract
G1 X115.643 Y115.307 E-0.05549 ; wipe and retract
G1 X115.437 Y115.540 E-0.08220 ; wipe and retract
G1 X115.270 Y115.616 E-0.04831 ; wipe and retract
G1 X115.107 Y115.620 E-0.04313 ; wipe and retract
G1 X114.895 Y115.532 E-0.06056 ; wipe and retract
G1 X114.688 Y115.312 E-0.07954 ; wipe and retract
G1 X114.666 Y115.237 E-0.02080 ; wipe and retract
;WIPE_END
G1 E-1.56409 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X112.484 Y114.637 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.553 Y114.466 E0.00853 ; perimeter
G1 X112.662 Y114.412 E0.00564 ; perimeter
G1 X112.937 Y114.399 E0.01276 ; perimeter
G1 X113.262 Y114.511 E0.01593 ; perimeter
G1 X113.645 Y114.795 E0.02206 ; perimeter
G1 X113.794 Y114.983 E0.01111 ; perimeter
G1 X113.877 Y115.186 E0.01016 ; perimeter
G1 X113.806 Y115.276 E0.00534 ; perimeter
G1 X113.778 Y115.360 E0.00408 ; perimeter
G1 X113.606 Y115.516 E0.01080 ; perimeter
G1 X113.467 Y115.545 E0.00653 ; perimeter
G1 X113.315 Y115.544 E0.00706 ; perimeter
G1 X113.147 Y115.479 E0.00834 ; perimeter
G1 X113.017 Y115.391 E0.00726 ; perimeter
G1 X112.680 Y115.106 E0.02043 ; perimeter
G1 X112.562 Y114.964 E0.00858 ; perimeter
G1 X112.492 Y114.802 E0.00816 ; perimeter
G1 X112.487 Y114.697 E0.00488 ; perimeter
G1 X112.658 Y114.575 F10800.000 ; move inwards before travel
G1 X112.728 Y114.694 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.398255
G1 F2400.000
G1 X113.071 Y114.888 E0.01165 ; infill
;WIDTH:0.411764
G1 X113.341 Y115.096 E0.01045 ; infill
G1 X113.524 Y115.265 E0.00763 ; infill
G1 X113.536 Y115.045 F10800.000 ; move to first infill point
;WIDTH:0.305826
G1 F2400.000
G1 X112.729 Y114.710 E0.01911 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.536 Y115.045 E-0.23066 ; wipe and retract
;WIPE_END
G1 E-2.16934 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X111.365 Y112.494 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.597 Y112.460 E0.01084 ; perimeter
G1 X111.763 Y112.560 E0.00897 ; perimeter
G1 X111.890 Y112.565 E0.00589 ; perimeter
G1 X112.100 Y112.731 E0.01238 ; perimeter
G1 X112.169 Y112.894 E0.00819 ; perimeter
G1 X112.173 Y113.081 E0.00871 ; perimeter
G1 X112.110 Y113.278 E0.00956 ; perimeter
G1 X112.054 Y113.368 E0.00491 ; perimeter
G1 X111.896 Y113.454 E0.00832 ; perimeter
G1 X111.871 Y113.485 E0.00183 ; perimeter
G1 X111.692 Y113.489 E0.00830 ; perimeter
G1 X111.539 Y113.424 E0.00768 ; perimeter
G1 X111.401 Y113.277 E0.00938 ; perimeter
G1 X111.309 Y112.968 E0.01494 ; perimeter
G1 X111.323 Y112.474 E0.02290 ; perimeter
G1 X111.098 Y112.359 E0.01171 ; perimeter
G1 X110.975 Y112.170 E0.01042 ; perimeter
G1 X110.574 Y112.133 E0.01866 ; perimeter
G1 X110.095 Y111.932 E0.02407 ; perimeter
G1 X109.744 Y111.706 E0.01933 ; perimeter
G1 X109.326 Y111.381 E0.02453 ; perimeter
G1 X108.877 Y111.108 E0.02433 ; perimeter
G1 X108.657 Y110.884 E0.01454 ; perimeter
G1 X108.501 Y110.649 E0.01306 ; perimeter
G1 X108.428 Y110.308 E0.01616 ; perimeter
G1 X108.550 Y110.228 E0.00676 ; perimeter
G1 X108.733 Y110.238 E0.00850 ; perimeter
G1 X109.108 Y110.338 E0.01797 ; perimeter
G1 X109.318 Y110.448 E0.01097 ; perimeter
G1 X109.864 Y110.868 E0.03188 ; perimeter
G1 X110.628 Y111.310 E0.04090 ; perimeter
G1 X110.957 Y111.608 E0.02058 ; perimeter
G1 X111.108 Y111.837 E0.01269 ; perimeter
G1 X111.115 Y112.124 E0.01332 ; perimeter
G1 X111.275 Y112.267 E0.00995 ; perimeter
G1 X111.343 Y112.439 E0.00856 ; perimeter
G1 X111.433 Y112.718 F10800.000 ; move inwards before travel
G1 X110.818 Y111.913 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.327442
G1 F2400.000
G1 X109.666 Y111.179 E0.03233 ; infill
;WIDTH:0.29774
G1 X108.974 Y110.683 E0.01803 ; infill
G1 X108.725 Y110.538 E0.00609 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.974 Y110.683 E-0.07589 ; wipe and retract
G1 X109.666 Y111.179 E-0.22456 ; wipe and retract
;WIPE_END
G1 E-2.09955 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X105.572 Y108.924 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.586 Y108.812 E0.00524 ; perimeter
G1 X105.660 Y108.732 E0.00502 ; perimeter
G1 X105.854 Y108.678 E0.00936 ; perimeter
G1 X106.052 Y108.681 E0.00917 ; perimeter
G1 X106.404 Y108.755 E0.01664 ; perimeter
G1 X106.801 Y108.927 E0.02004 ; perimeter
G1 X107.055 Y109.100 E0.01425 ; perimeter
G1 X107.234 Y109.289 E0.01203 ; perimeter
G1 X107.335 Y109.486 E0.01029 ; perimeter
G1 X107.338 Y109.564 E0.00361 ; perimeter
G1 X107.263 Y109.661 E0.00567 ; perimeter
G1 X107.033 Y109.734 E0.01119 ; perimeter
G1 X106.954 Y109.741 E0.00369 ; perimeter
G1 X106.622 Y109.692 E0.01553 ; perimeter
G1 X106.389 Y109.610 E0.01144 ; perimeter
G1 X106.124 Y109.487 E0.01355 ; perimeter
G1 X105.888 Y109.332 E0.01306 ; perimeter
G1 X105.754 Y109.198 E0.00879 ; perimeter
G1 X105.599 Y108.978 E0.01247 ; perimeter
G1 X105.661 Y108.854 F10800.000 ; move inwards before travel
G1 X105.878 Y108.958 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.304359
G1 F2400.000
G1 X106.081 Y109.043 E0.00480 ; infill
;WIDTH:0.344901
G1 X106.611 Y109.272 E0.01448 ; infill
G1 X107.028 Y109.483 E0.01173 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.611 Y109.272 E-0.12329 ; wipe and retract
G1 X106.081 Y109.043 E-0.15223 ; wipe and retract
;WIPE_END
G1 E-2.12448 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X103.251 Y107.194 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.176 Y107.294 E0.00580 ; perimeter
G1 X102.867 Y107.305 E0.01431 ; perimeter
G1 X102.560 Y107.141 E0.01610 ; perimeter
G1 X102.103 Y106.742 E0.02811 ; perimeter
G1 X101.208 Y105.812 E0.05978 ; perimeter
G1 X101.090 Y105.724 E0.00679 ; perimeter
G1 X100.787 Y105.384 E0.02112 ; perimeter
G1 X100.690 Y105.112 E0.01336 ; perimeter
G1 X100.692 Y104.950 E0.00749 ; perimeter
G1 X100.774 Y104.735 E0.01066 ; perimeter
G1 X100.926 Y104.540 E0.01147 ; perimeter
G1 X101.042 Y104.492 E0.00579 ; perimeter
G1 X101.140 Y104.514 E0.00467 ; perimeter
G1 X101.295 Y104.631 E0.00901 ; perimeter
G1 X101.766 Y105.243 E0.03576 ; perimeter
G1 X101.857 Y105.419 E0.00920 ; perimeter
G1 X102.433 Y105.962 E0.03665 ; perimeter
G1 X102.601 Y106.066 E0.00915 ; perimeter
G1 X103.125 Y106.496 E0.03138 ; perimeter
G1 X103.255 Y106.676 E0.01031 ; perimeter
G1 X103.315 Y106.886 E0.01012 ; perimeter
G1 X103.263 Y107.135 E0.01179 ; perimeter
G1 X103.126 Y107.206 F10800.000 ; move inwards before travel
G1 X103.055 Y106.953 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.41677
G1 F2400.000
G1 X102.805 Y106.787 E0.00935 ; infill
G1 X102.393 Y106.438 E0.01677 ; infill
;WIDTH:0.39926
G1 X102.206 Y106.282 E0.00721 ; infill
;WIDTH:0.345238
G1 X101.574 Y105.660 E0.02229 ; infill
;WIDTH:0.304904
G1 X100.974 Y104.887 E0.02131 ; infill
G1 X101.052 Y104.771 F10800.000 ; move to first infill point
;WIDTH:0.306145
G1 F2400.000
G1 X101.079 Y104.981 E0.00463 ; infill
;WIDTH:0.350277
G1 X101.086 Y105.025 E0.00113 ; infill
;WIDTH:0.363644
G1 X101.092 Y105.044 E0.00053 ; infill
;WIDTH:0.391632
G1 X101.159 Y105.163 E0.00397 ; infill
G1 X101.423 Y105.466 E0.01165 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.159 Y105.163 E-0.10600 ; wipe and retract
G1 X101.092 Y105.044 E-0.03617 ; wipe and retract
;WIPE_END
G1 E-2.25782 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X100.488 Y102.615 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.622 Y102.619 E0.00622 ; perimeter
G1 X100.810 Y102.777 E0.01136 ; perimeter
G1 X100.918 Y102.984 E0.01084 ; perimeter
G1 X100.952 Y103.170 E0.00874 ; perimeter
G1 X100.917 Y103.412 E0.01134 ; perimeter
G1 X100.882 Y103.517 E0.00511 ; perimeter
G1 X100.709 Y103.783 E0.01471 ; perimeter
G1 X100.595 Y103.788 E0.00531 ; perimeter
G1 X100.420 Y103.698 E0.00911 ; perimeter
G1 X100.232 Y103.521 E0.01198 ; perimeter
G1 X100.145 Y103.323 E0.01003 ; perimeter
G1 X100.107 Y102.941 E0.01774 ; perimeter
G1 X100.203 Y102.758 E0.00959 ; perimeter
G1 X100.354 Y102.620 E0.00947 ; perimeter
G1 X100.428 Y102.617 E0.00341 ; perimeter
G1 X100.570 Y102.721 F10800.000 ; move inwards before travel
G1 X100.177 Y101.110 ; move to first perimeter point
G1 F1800.000
G1 X100.039 Y101.077 E0.00658 ; perimeter
G1 X99.975 Y101.028 E0.00373 ; perimeter
G1 X99.827 Y100.755 E0.01435 ; perimeter
G1 X99.747 Y100.552 E0.01012 ; perimeter
G1 X99.714 Y100.330 E0.01038 ; perimeter
G1 X99.695 Y99.575 E0.03499 ; perimeter
G1 X99.621 Y98.964 E0.02852 ; perimeter
G1 X99.582 Y98.346 E0.02871 ; perimeter
G1 X99.624 Y98.023 E0.01505 ; perimeter
G1 X99.830 Y97.579 E0.02269 ; perimeter
G1 X100.054 Y97.323 E0.01575 ; perimeter
G1 X100.422 Y97.187 E0.01817 ; perimeter
G1 X100.546 Y97.110 E0.00677 ; perimeter
G1 X100.970 Y96.986 E0.02047 ; perimeter
G1 X101.108 Y96.891 E0.00778 ; perimeter
G1 X101.081 Y97.137 E0.01148 ; perimeter
G1 X100.997 Y97.264 E0.00707 ; perimeter
G1 X100.880 Y97.580 E0.01560 ; perimeter
G1 X100.601 Y97.998 E0.02325 ; perimeter
G1 X100.476 Y98.129 E0.00843 ; perimeter
G1 X100.462 Y98.248 E0.00555 ; perimeter
G1 X100.352 Y98.508 E0.01306 ; perimeter
G1 X100.317 Y98.734 E0.01061 ; perimeter
G1 X100.407 Y99.125 E0.01857 ; perimeter
G1 X100.446 Y99.626 E0.02326 ; perimeter
G1 X100.519 Y100.084 E0.02148 ; perimeter
G1 X100.511 Y100.488 E0.01872 ; perimeter
G1 X100.434 Y100.811 E0.01540 ; perimeter
G1 X100.311 Y101.024 E0.01139 ; perimeter
G1 X100.227 Y101.078 E0.00461 ; perimeter
G1 X100.091 Y100.997 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.039 Y101.077 E-0.04975 ; wipe and retract
G1 X99.975 Y101.028 E-0.02124 ; wipe and retract
G1 X99.827 Y100.755 E-0.08174 ; wipe and retract
G1 X99.747 Y100.552 E-0.05765 ; wipe and retract
G1 X99.714 Y100.330 E-0.05915 ; wipe and retract
G1 X99.695 Y99.575 E-0.19933 ; wipe and retract
G1 X99.621 Y98.964 E-0.16246 ; wipe and retract
G1 X99.582 Y98.346 E-0.16355 ; wipe and retract
G1 X99.624 Y98.023 E-0.08575 ; wipe and retract
G1 X99.830 Y97.579 E-0.12929 ; wipe and retract
G1 X100.054 Y97.323 E-0.08970 ; wipe and retract
G1 X100.422 Y97.187 E-0.10351 ; wipe and retract
G1 X100.546 Y97.110 E-0.03855 ; wipe and retract
G1 X100.970 Y96.986 E-0.11662 ; wipe and retract
G1 X101.108 Y96.891 E-0.04434 ; wipe and retract
G1 X101.081 Y97.137 E-0.06541 ; wipe and retract
G1 X100.997 Y97.264 E-0.04027 ; wipe and retract
G1 X100.880 Y97.580 E-0.08888 ; wipe and retract
G1 X100.601 Y97.998 E-0.13244 ; wipe and retract
G1 X100.476 Y98.129 E-0.04800 ; wipe and retract
G1 X100.462 Y98.248 E-0.03162 ; wipe and retract
G1 X100.352 Y98.508 E-0.07439 ; wipe and retract
G1 X100.317 Y98.734 E-0.06046 ; wipe and retract
G1 X100.407 Y99.125 E-0.10578 ; wipe and retract
G1 X100.446 Y99.626 E-0.13253 ; wipe and retract
G1 X100.504 Y99.991 E-0.09758 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X102.785 Y95.090 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.788 Y95.437 E0.01606 ; perimeter
G1 X102.623 Y95.788 E0.01799 ; perimeter
G1 X102.448 Y95.983 E0.01215 ; perimeter
G1 X101.990 Y96.270 E0.02503 ; perimeter
G1 X101.778 Y96.362 E0.01070 ; perimeter
G1 X101.534 Y96.544 E0.01410 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.456 Y96.602 E0.00406 ; perimeter (bridge)
G1 X101.464 Y96.512 E0.00380 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.479 Y96.347 E0.00765 ; perimeter
G1 X101.574 Y96.084 E0.01296 ; perimeter
G1 X101.569 Y95.979 E0.00488 ; perimeter
G1 X101.667 Y95.449 E0.02494 ; perimeter
G1 X101.819 Y95.241 E0.01196 ; perimeter
G1 X102.043 Y95.136 E0.01143 ; perimeter
G1 X102.376 Y95.111 E0.01549 ; perimeter
G1 X102.563 Y95.054 E0.00906 ; perimeter
G1 X102.726 Y95.080 E0.00763 ; perimeter
G1 X102.619 Y95.394 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.788 Y95.437 E-0.09547 ; wipe and retract
G1 X102.623 Y95.788 E-0.10247 ; wipe and retract
G1 X102.448 Y95.983 E-0.06924 ; wipe and retract
G1 X101.990 Y96.270 E-0.14258 ; wipe and retract
G1 X101.778 Y96.362 E-0.06096 ; wipe and retract
G1 X101.534 Y96.544 E-0.08035 ; wipe and retract
;WIPE_END
G1 E-1.84894 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X100.510 Y97.412 ; move to first infill point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.415161
G1 F2400.000
G1 X100.124 Y97.905 E0.01937 ; infill
;WIDTH:0.382714
G1 X100.077 Y98.001 E0.00303 ; infill
G1 X99.982 Y98.359 E0.01045 ; infill
;WIDTH:0.358588
G1 X99.978 Y98.383 E0.00063 ; infill
;WIDTH:0.347621
G1 X99.974 Y98.419 E0.00093 ; infill
;WIDTH:0.335127
G1 X99.967 Y98.573 E0.00373 ; infill
;WIDTH:0.301847
G1 X99.960 Y98.726 E0.00330 ; infill
;WIDTH:0.268566
G1 X100.030 Y99.183 E0.00867 ; infill
G1 X100.093 Y99.894 E0.01339 ; infill
;WIDTH:0.371027
G1 X100.114 Y100.295 E0.01097 ; infill
;WIDTH:0.362566
G1 X100.123 Y100.438 E0.00381 ; infill
;WIDTH:0.337851
G1 X100.110 Y100.770 E0.00814 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.123 Y100.438 E-0.08764 ; wipe and retract
;WIPE_END
G1 E-2.31236 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X103.599 Y94.767 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.456 Y94.643 E0.00878 ; perimeter
G1 X103.505 Y94.448 E0.00929 ; perimeter
G1 X103.582 Y94.342 E0.00607 ; perimeter
G1 X103.810 Y94.202 E0.01239 ; perimeter
G1 X103.972 Y94.151 E0.00787 ; perimeter
G1 X104.281 Y94.135 E0.01436 ; perimeter
G1 X104.415 Y94.147 E0.00620 ; perimeter
G1 X104.835 Y94.242 E0.01998 ; perimeter
G1 X105.007 Y94.351 E0.00941 ; perimeter
G1 X105.456 Y94.364 E0.02085 ; perimeter
G1 X105.994 Y94.317 E0.02499 ; perimeter
G1 X106.046 Y94.288 E0.00274 ; perimeter
G1 X106.433 Y94.298 E0.01797 ; perimeter
G1 X106.576 Y94.347 E0.00699 ; perimeter
G1 X106.626 Y94.388 E0.00298 ; perimeter
G1 X106.742 Y94.620 E0.01203 ; perimeter
G1 X106.737 Y94.730 E0.00510 ; perimeter
G1 X106.633 Y94.939 E0.01082 ; perimeter
G1 X106.360 Y95.051 E0.01369 ; perimeter
G1 X106.127 Y95.053 E0.01076 ; perimeter
G1 X105.806 Y94.966 E0.01542 ; perimeter
G1 X105.354 Y94.887 E0.02127 ; perimeter
G1 X104.794 Y94.908 E0.02593 ; perimeter
G1 X104.608 Y94.972 E0.00912 ; perimeter
G1 X104.280 Y94.990 E0.01522 ; perimeter
G1 X103.917 Y94.924 E0.01710 ; perimeter
G1 X103.656 Y94.779 E0.01381 ; perimeter
G1 X103.610 Y94.578 F10800.000 ; move inwards before travel
G1 X103.806 Y94.487 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.35598
G1 F2400.000
G1 X104.053 Y94.545 E0.00660 ; infill
;WIDTH:0.378338
G1 X105.226 Y94.637 E0.03280 ; infill
G1 X105.424 Y94.630 F10800.000 ; move to first infill point
;WIDTH:0.0992862
G1 F2400.000
G1 X105.466 Y94.634 E0.00020 ; infill
;WIDTH:0.134398
G1 X105.601 Y94.639 E0.00103 ; infill
;WIDTH:0.169509
G1 X105.737 Y94.645 E0.00143 ; infill
;WIDTH:0.206944
G1 X105.880 Y94.651 E0.00195 ; infill
;WIDTH:0.241531
G1 X105.978 Y94.660 E0.00163 ; infill
;WIDTH:0.276119
G1 X106.076 Y94.668 E0.00191 ; infill
;WIDTH:0.306082
G1 X106.130 Y94.667 E0.00117 ; infill
;WIDTH:0.319278
G1 X106.147 Y94.665 E0.00040 ; infill
;WIDTH:0.329287
G1 X106.494 Y94.679 E0.00825 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.147 Y94.665 E-0.09146 ; wipe and retract
;WIPE_END
G1 E-2.30854 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X109.282 Y95.694 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.305 Y95.404 E0.01349 ; perimeter
G1 X109.387 Y95.323 E0.00533 ; perimeter
G1 X109.418 Y95.261 E0.00321 ; perimeter
G1 X109.483 Y95.212 E0.00377 ; perimeter
G1 X109.626 Y95.173 E0.00686 ; perimeter
G1 X109.818 Y95.190 E0.00896 ; perimeter
G1 X109.929 Y95.221 E0.00532 ; perimeter
G1 X110.240 Y95.378 E0.01616 ; perimeter
G1 X110.359 Y95.462 E0.00672 ; perimeter
G1 X110.725 Y95.777 E0.02239 ; perimeter
G1 X111.685 Y96.676 E0.06091 ; perimeter
G1 X111.774 Y96.738 E0.00505 ; perimeter
G1 X111.828 Y96.813 E0.00429 ; perimeter
G1 X111.959 Y97.083 E0.01389 ; perimeter
G1 X111.983 Y97.170 E0.00417 ; perimeter
G1 X111.974 Y97.439 E0.01245 ; perimeter
G1 X111.892 Y97.637 E0.00997 ; perimeter
G1 X111.751 Y97.705 E0.00724 ; perimeter
G1 X111.579 Y97.700 E0.00796 ; perimeter
G1 X111.455 Y97.638 E0.00641 ; perimeter
G1 X111.241 Y97.396 E0.01500 ; perimeter
G1 X111.139 Y97.245 E0.00841 ; perimeter
G1 X111.001 Y96.948 E0.01516 ; perimeter
G1 X110.664 Y96.625 E0.02161 ; perimeter
G1 X110.412 Y96.482 E0.01342 ; perimeter
G1 X110.264 Y96.363 E0.00883 ; perimeter
G1 X109.969 Y96.183 E0.01600 ; perimeter
G1 X109.565 Y95.993 E0.02067 ; perimeter
G1 X109.362 Y95.835 E0.01194 ; perimeter
G1 X109.320 Y95.740 E0.00482 ; perimeter
G1 X109.500 Y95.501 F10800.000 ; move inwards before travel
G1 X109.698 Y95.585 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.338827
G1 F2400.000
G1 X110.104 Y95.789 E0.01118 ; infill
G1 X110.472 Y96.052 E0.01114 ; infill
;WIDTH:0.223678
G1 X110.871 Y96.366 E0.00763 ; infill
;WIDTH:0.234635
G1 X111.287 Y96.765 E0.00918 ; infill
;WIDTH:0.282239
G1 X111.361 Y96.867 E0.00250 ; infill
;WIDTH:0.329844
G1 X111.435 Y96.969 E0.00300 ; infill
;WIDTH:0.339838
G1 X111.736 Y97.353 E0.01205 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.435 Y96.969 E-0.12882 ; wipe and retract
;WIPE_END
G1 E-2.27118 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X113.490 Y100.251 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.645 Y100.181 E0.00784 ; perimeter
G1 X113.760 Y100.176 E0.00535 ; perimeter
G1 X113.873 Y100.210 E0.00545 ; perimeter
G1 X114.067 Y100.331 E0.01060 ; perimeter
G1 X114.215 Y100.520 E0.01110 ; perimeter
G1 X114.243 Y100.596 E0.00378 ; perimeter
G1 X114.243 Y100.810 E0.00990 ; perimeter
G1 X114.167 Y100.962 E0.00789 ; perimeter
G1 X114.061 Y101.040 E0.00611 ; perimeter
G1 X113.939 Y101.065 E0.00578 ; perimeter
G1 X113.732 Y101.039 E0.00965 ; perimeter
G1 X113.549 Y100.932 E0.00981 ; perimeter
G1 X113.437 Y100.793 E0.00827 ; perimeter
G1 X113.374 Y100.529 E0.01257 ; perimeter
G1 X113.384 Y100.402 E0.00592 ; perimeter
G1 X113.456 Y100.300 E0.00580 ; perimeter
G1 X113.648 Y100.312 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.645 Y100.181 E-0.05890 ; wipe and retract
G1 X113.760 Y100.176 E-0.03048 ; wipe and retract
G1 X113.873 Y100.210 E-0.03106 ; wipe and retract
G1 X114.067 Y100.331 E-0.06038 ; wipe and retract
G1 X114.215 Y100.520 E-0.06326 ; wipe and retract
G1 X114.243 Y100.596 E-0.02153 ; wipe and retract
G1 X114.243 Y100.810 E-0.05642 ; wipe and retract
G1 X114.167 Y100.962 E-0.04496 ; wipe and retract
G1 X114.061 Y101.040 E-0.03479 ; wipe and retract
G1 X113.939 Y101.065 E-0.03291 ; wipe and retract
G1 X113.732 Y101.039 E-0.05499 ; wipe and retract
G1 X113.549 Y100.932 E-0.05591 ; wipe and retract
G1 X113.437 Y100.793 E-0.04709 ; wipe and retract
G1 X113.374 Y100.529 E-0.07162 ; wipe and retract
G1 X113.384 Y100.402 E-0.03371 ; wipe and retract
G1 X113.456 Y100.300 E-0.03304 ; wipe and retract
;WIPE_END
G1 E-1.66896 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X115.386 Y105.974 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.596 Y105.991 E0.00974 ; perimeter
G1 X115.706 Y106.035 E0.00548 ; perimeter
G1 X115.814 Y106.125 E0.00652 ; perimeter
G1 X115.879 Y106.255 E0.00676 ; perimeter
G1 X115.899 Y106.481 E0.01050 ; perimeter
G1 X115.854 Y106.780 E0.01401 ; perimeter
G1 X115.842 Y107.313 E0.02468 ; perimeter
G1 X115.875 Y107.688 E0.01742 ; perimeter
G1 X115.857 Y108.068 E0.01764 ; perimeter
G1 X115.797 Y108.412 E0.01619 ; perimeter
G1 X115.796 Y108.642 E0.01064 ; perimeter
G1 X115.709 Y108.988 E0.01650 ; perimeter
G1 X115.615 Y109.118 E0.00745 ; perimeter
G1 X115.566 Y109.294 E0.00849 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.513 Y109.438 E0.00639 ; perimeter (bridge)
G1 X115.478 Y109.411 E0.00185 ; perimeter (bridge)
G1 X115.470 Y109.263 E0.00621 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.326 Y109.053 E0.01178 ; perimeter
G1 X115.221 Y108.617 E0.02075 ; perimeter
G1 X115.142 Y107.729 E0.04131 ; perimeter
G1 X115.136 Y107.239 E0.02269 ; perimeter
G1 X115.164 Y107.027 E0.00991 ; perimeter
G1 X115.100 Y106.784 E0.01164 ; perimeter
G1 X115.082 Y106.394 E0.01809 ; perimeter
G1 X115.139 Y106.207 E0.00906 ; perimeter
G1 X115.331 Y105.998 E0.01315 ; perimeter
G1 X115.535 Y106.123 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.596 Y105.991 E-0.06990 ; wipe and retract
G1 X115.706 Y106.035 E-0.03119 ; wipe and retract
G1 X115.814 Y106.125 E-0.03712 ; wipe and retract
G1 X115.879 Y106.255 E-0.03854 ; wipe and retract
G1 X115.899 Y106.481 E-0.05985 ; wipe and retract
G1 X115.854 Y106.780 E-0.07982 ; wipe and retract
G1 X115.842 Y107.313 E-0.14060 ; wipe and retract
G1 X115.875 Y107.688 E-0.09924 ; wipe and retract
G1 X115.857 Y108.068 E-0.10049 ; wipe and retract
G1 X115.797 Y108.412 E-0.09226 ; wipe and retract
G1 X115.796 Y108.642 E-0.06060 ; wipe and retract
G1 X115.709 Y108.988 E-0.09399 ; wipe and retract
G1 X115.615 Y109.118 E-0.04244 ; wipe and retract
G1 X115.566 Y109.294 E-0.04836 ; wipe and retract
;WIPE_END
G1 E-1.40560 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X115.254 Y111.052 ; move to first perimeter point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.171 Y110.936 E0.00661 ; perimeter
G1 X115.119 Y110.717 E0.01040 ; perimeter
G1 X115.140 Y110.486 E0.01078 ; perimeter
G1 X115.220 Y110.387 E0.00587 ; perimeter
G1 X115.299 Y110.234 E0.00801 ; perimeter
G1 X115.400 Y110.149 E0.00611 ; perimeter
G1 X115.455 Y109.919 E0.01093 ; perimeter
G1 X115.558 Y110.062 E0.00818 ; perimeter
G1 X115.599 Y110.082 E0.00207 ; perimeter
G1 X115.676 Y110.267 E0.00928 ; perimeter
G1 X115.815 Y110.382 E0.00837 ; perimeter
G1 X115.898 Y110.711 E0.01569 ; perimeter
G1 X115.829 Y110.990 E0.01332 ; perimeter
G1 X115.732 Y111.082 E0.00617 ; perimeter
G1 X115.478 Y111.148 E0.01218 ; perimeter
G1 X115.308 Y111.079 E0.00852 ; perimeter
G1 X115.273 Y110.910 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.171 Y110.936 E-0.05226 ; wipe and retract
G1 X115.119 Y110.717 E-0.05926 ; wipe and retract
G1 X115.140 Y110.486 E-0.06143 ; wipe and retract
G1 X115.220 Y110.387 E-0.03345 ; wipe and retract
G1 X115.299 Y110.234 E-0.04562 ; wipe and retract
G1 X115.400 Y110.149 E-0.03479 ; wipe and retract
G1 X115.455 Y109.919 E-0.06225 ; wipe and retract
G1 X115.558 Y110.062 E-0.04660 ; wipe and retract
G1 X115.599 Y110.082 E-0.01178 ; wipe and retract
G1 X115.676 Y110.267 E-0.05289 ; wipe and retract
G1 X115.815 Y110.382 E-0.04769 ; wipe and retract
G1 X115.898 Y110.711 E-0.08939 ; wipe and retract
G1 X115.829 Y110.990 E-0.07586 ; wipe and retract
G1 X115.732 Y111.082 E-0.03515 ; wipe and retract
G1 X115.478 Y111.148 E-0.06938 ; wipe and retract
G1 X115.308 Y111.079 E-0.04854 ; wipe and retract
;WIPE_END
G1 E-1.57365 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 X115.523 Y108.702 ; move to first infill point
G1 Z22.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.138349
G1 F2400.000
G1 X115.507 Y108.570 E0.00105 ; infill
;WIDTH:0.156921
G1 X115.500 Y108.381 E0.00179 ; infill
;WIDTH:0.202954
G1 X115.507 Y108.206 E0.00234 ; infill
;WIDTH:0.245247
G1 X115.490 Y107.319 E0.01493 ; infill
G1 X115.507 Y106.986 E0.00561 ; infill
;WIDTH:0.277311
G1 X115.494 Y106.871 E0.00225 ; infill
;WIDTH:0.315395
G1 X115.479 Y106.739 E0.00301 ; infill
;WIDTH:0.326908
G1 X115.490 Y106.439 E0.00710 ; infill
G1 X115.510 Y106.364 E0.00182 ; infill
G1 X115.542 Y106.229 F10800.000 ; move to first infill point
;WIDTH:0.132479
G1 F2400.000
G1 X115.384 Y106.914 E0.00524 ; infill
;LAYER_CHANGE
;Z:22.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;22.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.542 Y106.229 E-0.18554 ; wipe and retract
;WIPE_END
G1 E-2.21446 F2400.000 ; retract
G1 Z22.475 F10800.000 ; lift Z
G1 Z22.600 ; move to next layer (112)
;AFTER_LAYER_CHANGE
;22.6
G1 Z22.675 ; lift Z
G1 X115.176 Y114.653 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.276 Y114.632 E0.00476 ; perimeter
G1 X115.452 Y114.642 E0.00817 ; perimeter
G1 X115.559 Y114.687 E0.00534 ; perimeter
G1 X115.633 Y114.751 E0.00455 ; perimeter
G1 X115.709 Y114.869 E0.00649 ; perimeter
G1 X115.738 Y114.966 E0.00471 ; perimeter
G1 X115.726 Y115.117 E0.00702 ; perimeter
G1 X115.641 Y115.308 E0.00969 ; perimeter
G1 X115.472 Y115.502 E0.01191 ; perimeter
G1 X115.279 Y115.596 E0.00993 ; perimeter
G1 X115.125 Y115.595 E0.00716 ; perimeter
G1 X114.938 Y115.519 E0.00936 ; perimeter
G1 X114.781 Y115.348 E0.01075 ; perimeter
G1 X114.717 Y115.242 E0.00571 ; perimeter
G1 X114.729 Y115.118 E0.00581 ; perimeter
G1 X114.835 Y114.928 E0.01007 ; perimeter
G1 X115.050 Y114.719 E0.01389 ; perimeter
G1 X115.123 Y114.681 E0.00378 ; perimeter
G1 X115.255 Y114.718 F10800.000 ; move inwards before travel
G1 X115.200 Y115.167 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.392008
G1 F2400.000
G1 X115.313 Y115.042 E0.00491 ; infill
G1 X113.806 Y114.944 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.817 Y115.143 E0.00922 ; perimeter
G1 X113.746 Y115.359 E0.01054 ; perimeter
G1 X113.599 Y115.488 E0.00906 ; perimeter
G1 X113.475 Y115.520 E0.00590 ; perimeter
G1 X113.344 Y115.523 E0.00609 ; perimeter
G1 X113.204 Y115.474 E0.00688 ; perimeter
G1 X112.841 Y115.213 E0.02070 ; perimeter
G1 X112.676 Y115.000 E0.01248 ; perimeter
G1 X112.633 Y114.899 E0.00508 ; perimeter
G1 X112.617 Y114.774 E0.00583 ; perimeter
G1 X112.669 Y114.598 E0.00852 ; perimeter
G1 X112.847 Y114.504 E0.00930 ; perimeter
G1 X113.067 Y114.477 E0.01029 ; perimeter
G1 X113.399 Y114.590 E0.01624 ; perimeter
G1 X113.671 Y114.785 E0.01554 ; perimeter
G1 X113.768 Y114.899 E0.00688 ; perimeter
G1 X113.674 Y115.093 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.817 Y115.143 E-0.06581 ; wipe and retract
G1 X113.746 Y115.359 E-0.06004 ; wipe and retract
G1 X113.599 Y115.488 E-0.05162 ; wipe and retract
G1 X113.475 Y115.520 E-0.03363 ; wipe and retract
G1 X113.344 Y115.523 E-0.03469 ; wipe and retract
G1 X113.204 Y115.474 E-0.03922 ; wipe and retract
G1 X112.841 Y115.213 E-0.11791 ; wipe and retract
G1 X112.676 Y115.000 E-0.07112 ; wipe and retract
G1 X112.633 Y114.899 E-0.02893 ; wipe and retract
G1 X112.617 Y114.774 E-0.03320 ; wipe and retract
G1 X112.669 Y114.598 E-0.04855 ; wipe and retract
G1 X112.847 Y114.504 E-0.05296 ; wipe and retract
G1 X113.067 Y114.477 E-0.05859 ; wipe and retract
G1 X113.399 Y114.590 E-0.09252 ; wipe and retract
G1 X113.671 Y114.785 E-0.08851 ; wipe and retract
G1 X113.768 Y114.899 E-0.03919 ; wipe and retract
;WIPE_END
G1 E-1.48351 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X105.932 Y108.864 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.101 Y108.810 E0.00819 ; perimeter
G1 X106.310 Y108.807 E0.00967 ; perimeter
G1 X106.656 Y108.881 E0.01640 ; perimeter
G1 X107.034 Y109.037 E0.01895 ; perimeter
G1 X107.277 Y109.188 E0.01327 ; perimeter
G1 X107.474 Y109.375 E0.01257 ; perimeter
G1 X107.588 Y109.591 E0.01134 ; perimeter
G1 X107.798 Y109.787 E0.01327 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.797 Y109.861 E0.00309 ; perimeter (bridge)
G1 X107.736 Y109.869 E0.00259 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.584 Y109.891 E0.00714 ; perimeter
G1 X107.315 Y109.850 E0.01258 ; perimeter
G1 X107.225 Y109.870 E0.00428 ; perimeter
G1 X106.924 Y109.824 E0.01410 ; perimeter
G1 X106.472 Y109.653 E0.02241 ; perimeter
G1 X106.153 Y109.451 E0.01748 ; perimeter
G1 X105.980 Y109.271 E0.01158 ; perimeter
G1 X105.916 Y109.183 E0.00505 ; perimeter
G1 X105.857 Y108.947 E0.01124 ; perimeter
G1 X105.892 Y108.908 E0.00243 ; perimeter
G1 X106.099 Y108.922 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.101 Y108.810 E-0.06087 ; wipe and retract
G1 X106.310 Y108.807 E-0.05507 ; wipe and retract
G1 X106.656 Y108.881 E-0.09342 ; wipe and retract
G1 X107.034 Y109.037 E-0.10796 ; wipe and retract
G1 X107.277 Y109.188 E-0.07560 ; wipe and retract
G1 X107.474 Y109.375 E-0.07160 ; wipe and retract
G1 X107.588 Y109.591 E-0.06458 ; wipe and retract
G1 X107.798 Y109.787 E-0.07560 ; wipe and retract
;WIPE_END
G1 E-1.79530 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X111.267 Y112.531 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.796 Y112.271 E0.02492 ; perimeter
G1 X110.346 Y112.074 E0.02276 ; perimeter
G1 X109.963 Y111.816 E0.02135 ; perimeter
G1 X109.735 Y111.609 E0.01429 ; perimeter
G1 X109.598 Y111.439 E0.01009 ; perimeter
G1 X109.094 Y111.220 E0.02546 ; perimeter
G1 X108.725 Y110.989 E0.02017 ; perimeter
G1 X108.473 Y110.757 E0.01589 ; perimeter
G1 X108.227 Y110.403 E0.01994 ; perimeter
G1 X108.174 Y110.235 E0.00814 ; perimeter
G1 X108.097 Y110.140 E0.00569 ; perimeter
G1 X108.289 Y110.015 E0.01059 ; perimeter
G1 X108.589 Y110.071 E0.01414 ; perimeter
G1 X108.996 Y110.232 E0.02029 ; perimeter
G1 X109.266 Y110.420 E0.01524 ; perimeter
G1 X109.534 Y110.640 E0.01605 ; perimeter
G1 X109.606 Y110.755 E0.00626 ; perimeter
G1 X109.809 Y110.964 E0.01353 ; perimeter
G1 X110.173 Y111.099 E0.01799 ; perimeter
G1 X110.387 Y111.228 E0.01155 ; perimeter
G1 X110.756 Y111.383 E0.01853 ; perimeter
G1 X110.951 Y111.510 E0.01078 ; perimeter
G1 X111.230 Y111.772 E0.01771 ; perimeter
G1 X111.439 Y112.089 E0.01761 ; perimeter
G1 X111.824 Y112.431 E0.02387 ; perimeter
G1 X112.117 Y112.649 E0.01690 ; perimeter
G1 X112.190 Y112.806 E0.00802 ; perimeter
G1 X112.199 Y112.999 E0.00898 ; perimeter
G1 X112.088 Y113.256 E0.01298 ; perimeter
G1 X112.042 Y113.310 E0.00327 ; perimeter
G1 X111.881 Y113.392 E0.00837 ; perimeter
G1 X111.722 Y113.404 E0.00737 ; perimeter
G1 X111.541 Y113.328 E0.00911 ; perimeter
G1 X111.439 Y113.221 E0.00683 ; perimeter
G1 X111.382 Y113.109 E0.00582 ; perimeter
G1 X111.286 Y112.809 E0.01459 ; perimeter
G1 X111.259 Y112.780 E0.00182 ; perimeter
G1 X111.265 Y112.591 E0.00876 ; perimeter
G1 X111.390 Y112.151 F10800.000 ; move inwards before travel
G1 X111.185 Y112.143 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23503
G1 F2400.000
G1 X110.827 Y111.890 E0.00701 ; infill
;WIDTH:0.331422
G1 X110.384 Y111.640 E0.01220 ; infill
;WIDTH:0.323283
G1 X110.230 Y111.557 E0.00409 ; infill
;WIDTH:0.28933
G1 X110.024 Y111.409 E0.00518 ; infill
;WIDTH:0.245725
G1 X109.748 Y111.242 E0.00545 ; infill
G1 X109.504 Y111.136 F10800.000 ; move to first infill point
;WIDTH:0.296331
G1 F2400.000
G1 X109.254 Y110.886 E0.00744 ; infill
G1 X108.961 Y110.679 E0.00755 ; infill
G1 X108.481 Y110.296 E0.01294 ; infill
G1 X107.303 Y109.569 F10800.000 ; move to first infill point
;WIDTH:0.304841
G1 F2400.000
G1 X107.013 Y109.462 E0.00673 ; infill
G1 X106.341 Y109.164 E0.01600 ; infill
;WIDTH:0.291571
G1 X106.141 Y109.082 E0.00449 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.341 Y109.164 E-0.05729 ; wipe and retract
;WIPE_END
G1 E-2.34271 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X103.253 Y107.079 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.106 Y107.179 E0.00823 ; perimeter
G1 X102.989 Y107.230 E0.00591 ; perimeter
G1 X102.743 Y107.187 E0.01158 ; perimeter
G1 X102.574 Y107.101 E0.00880 ; perimeter
G1 X102.227 Y106.808 E0.02101 ; perimeter
G1 X101.109 Y105.669 E0.07397 ; perimeter
G1 X100.784 Y105.291 E0.02306 ; perimeter
G1 X100.702 Y105.069 E0.01098 ; perimeter
G1 X100.703 Y104.833 E0.01091 ; perimeter
G1 X100.786 Y104.592 E0.01183 ; perimeter
G1 X100.857 Y104.511 E0.00497 ; perimeter
G1 X100.921 Y104.297 E0.01036 ; perimeter
G1 X101.297 Y104.519 E0.02022 ; perimeter
G1 X101.589 Y104.966 E0.02476 ; perimeter
G1 X101.827 Y105.428 E0.02406 ; perimeter
G1 X102.314 Y105.895 E0.03127 ; perimeter
G1 X102.408 Y105.939 E0.00480 ; perimeter
G1 X102.667 Y106.128 E0.01487 ; perimeter
G1 X102.813 Y106.186 E0.00727 ; perimeter
G1 X103.140 Y106.457 E0.01969 ; perimeter
G1 X103.327 Y106.757 E0.01637 ; perimeter
G1 X103.273 Y107.022 E0.01255 ; perimeter
G1 X103.075 Y107.068 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.106 Y107.179 E-0.06044 ; wipe and retract
G1 X102.989 Y107.230 E-0.03365 ; wipe and retract
G1 X102.743 Y107.187 E-0.06596 ; wipe and retract
G1 X102.574 Y107.101 E-0.05012 ; wipe and retract
G1 X102.227 Y106.808 E-0.11969 ; wipe and retract
G1 X101.109 Y105.669 E-0.42138 ; wipe and retract
G1 X100.784 Y105.291 E-0.13136 ; wipe and retract
G1 X100.702 Y105.069 E-0.06253 ; wipe and retract
G1 X100.703 Y104.833 E-0.06213 ; wipe and retract
G1 X100.786 Y104.592 E-0.06742 ; wipe and retract
G1 X100.857 Y104.511 E-0.02831 ; wipe and retract
G1 X100.921 Y104.297 E-0.05903 ; wipe and retract
G1 X101.297 Y104.519 E-0.11519 ; wipe and retract
G1 X101.589 Y104.966 E-0.14105 ; wipe and retract
G1 X101.827 Y105.428 E-0.13705 ; wipe and retract
G1 X102.314 Y105.895 E-0.17813 ; wipe and retract
G1 X102.408 Y105.939 E-0.02733 ; wipe and retract
G1 X102.667 Y106.128 E-0.08469 ; wipe and retract
G1 X102.813 Y106.186 E-0.04140 ; wipe and retract
G1 X103.140 Y106.457 E-0.11215 ; wipe and retract
G1 X103.327 Y106.757 E-0.09323 ; wipe and retract
G1 X103.273 Y107.022 E-0.07151 ; wipe and retract
;WIPE_END
G1 E-0.23626 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X100.738 Y103.799 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.608 Y103.693 E0.00775 ; perimeter
G1 X100.426 Y103.608 E0.00932 ; perimeter
G1 X100.242 Y103.430 E0.01186 ; perimeter
G1 X100.153 Y103.240 E0.00970 ; perimeter
G1 X100.141 Y102.978 E0.01217 ; perimeter
G1 X100.214 Y102.771 E0.01017 ; perimeter
G1 X100.375 Y102.640 E0.00963 ; perimeter
G1 X100.488 Y102.605 E0.00546 ; perimeter
G1 X100.690 Y102.642 E0.00951 ; perimeter
G1 X100.808 Y102.708 E0.00626 ; perimeter
G1 X100.934 Y102.943 E0.01234 ; perimeter
G1 X100.952 Y103.086 E0.00672 ; perimeter
G1 X100.900 Y103.367 E0.01323 ; perimeter
G1 X100.850 Y103.465 E0.00508 ; perimeter
G1 X100.762 Y103.748 E0.01373 ; perimeter
G1 X100.662 Y103.650 F10800.000 ; move inwards before travel
G1 X100.989 Y104.744 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.356418
G1 F2400.000
G1 X101.155 Y105.073 E0.00961 ; infill
G1 X101.389 Y105.411 E0.01071 ; infill
;WIDTH:0.245514
G1 X101.562 Y105.645 E0.00491 ; infill
;WIDTH:0.263331
G1 X102.099 Y106.176 E0.01384 ; infill
;WIDTH:0.270521
G1 X102.128 Y106.200 E0.00070 ; infill
;WIDTH:0.309349
G1 X102.217 Y106.263 E0.00241 ; infill
;WIDTH:0.335311
G1 X102.336 Y106.366 E0.00385 ; infill
;WIDTH:0.361272
G1 X102.456 Y106.470 E0.00419 ; infill
;WIDTH:0.373422
G1 X102.489 Y106.495 E0.00114 ; infill
;WIDTH:0.382229
G1 X102.507 Y106.507 E0.00060 ; infill
;WIDTH:0.417391
G1 X103.059 Y106.903 E0.02118 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.507 Y106.507 E-0.17953 ; wipe and retract
;WIPE_END
G1 E-2.22047 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X100.159 Y100.819 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.063 Y100.799 E0.00459 ; perimeter
G1 X99.927 Y100.687 E0.00814 ; perimeter
G1 X99.748 Y100.324 E0.01876 ; perimeter
G1 X99.712 Y100.133 E0.00900 ; perimeter
G1 X99.649 Y99.234 E0.04172 ; perimeter
G1 X99.642 Y98.762 E0.02190 ; perimeter
G1 X99.701 Y98.275 E0.02272 ; perimeter
G1 X99.807 Y97.835 E0.02097 ; perimeter
G1 X100.020 Y97.417 E0.02173 ; perimeter
G1 X100.165 Y97.246 E0.01037 ; perimeter
G1 X100.609 Y96.952 E0.02468 ; perimeter
G1 X100.954 Y96.782 E0.01782 ; perimeter
G1 X101.307 Y96.402 E0.02400 ; perimeter
G1 X101.407 Y96.154 E0.01238 ; perimeter
G1 X101.551 Y95.908 E0.01322 ; perimeter
G1 X101.580 Y95.775 E0.00628 ; perimeter
G1 X101.718 Y95.527 E0.01315 ; perimeter
G1 X101.728 Y95.455 E0.00337 ; perimeter
G1 X101.859 Y95.312 E0.00900 ; perimeter
G1 X101.988 Y95.260 E0.00642 ; perimeter
G1 X102.558 Y95.232 E0.02644 ; perimeter
G1 X102.856 Y95.320 E0.01441 ; perimeter
G1 X102.913 Y95.435 E0.00591 ; perimeter
G1 X102.941 Y95.449 E0.00146 ; perimeter
G1 X102.951 Y95.519 E0.00328 ; perimeter
G1 X102.849 Y95.776 E0.01279 ; perimeter
G1 X102.685 Y95.944 E0.01089 ; perimeter
G1 X102.479 Y96.065 E0.01104 ; perimeter
G1 X101.974 Y96.433 E0.02898 ; perimeter
G1 X101.353 Y96.963 E0.03781 ; perimeter
G1 X101.183 Y97.221 E0.01435 ; perimeter
G1 X101.131 Y97.356 E0.00669 ; perimeter
G1 X100.887 Y97.686 E0.01901 ; perimeter
G1 X100.605 Y97.956 E0.01806 ; perimeter
G1 X100.371 Y98.236 E0.01689 ; perimeter
G1 X100.308 Y98.680 E0.02079 ; perimeter
G1 X100.454 Y99.263 E0.02786 ; perimeter
G1 X100.518 Y99.834 E0.02660 ; perimeter
G1 X100.507 Y100.217 E0.01773 ; perimeter
G1 X100.407 Y100.562 E0.01666 ; perimeter
G1 X100.275 Y100.755 E0.01083 ; perimeter
G1 X100.210 Y100.786 E0.00336 ; perimeter
G1 X100.099 Y100.741 F10800.000 ; move inwards before travel
G1 X100.100 Y100.493 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.308859
G1 F2400.000
G1 X100.116 Y100.155 E0.00748 ; infill
G1 X100.106 Y99.851 E0.00673 ; infill
G1 X100.001 Y98.926 E0.02059 ; infill
;WIDTH:0.206588
G1 X99.979 Y98.681 E0.00334 ; infill
G1 X100.065 Y98.123 E0.00769 ; infill
G1 X100.288 Y97.474 E0.00934 ; infill
G1 X100.977 Y97.065 F10800.000 ; move to first infill point
;WIDTH:0.293734
G1 F2400.000
G1 X100.356 Y97.640 E0.01766 ; infill
G1 X99.958 Y98.236 E0.01494 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.356 Y97.640 E-0.18898 ; wipe and retract
G1 X100.977 Y97.065 E-0.22347 ; wipe and retract
;WIPE_END
G1 E-1.98755 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X101.591 Y96.433 ; move to first infill point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.302469
G1 F2400.000
G1 X102.319 Y95.485 E0.02579 ; infill
G1 X102.678 Y95.524 F10800.000 ; move to first infill point
;WIDTH:0.347302
G1 F2400.000
G1 X101.794 Y95.922 E0.02452 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.678 Y95.524 E-0.25567 ; wipe and retract
;WIPE_END
G1 E-2.14433 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X103.794 Y94.890 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.751 Y94.802 E0.00455 ; perimeter
G1 X103.734 Y94.529 E0.01265 ; perimeter
G1 X103.844 Y94.335 E0.01035 ; perimeter
G1 X103.979 Y94.238 E0.00769 ; perimeter
G1 X104.178 Y94.179 E0.00963 ; perimeter
G1 X104.470 Y94.164 E0.01351 ; perimeter
G1 X104.670 Y94.181 E0.00933 ; perimeter
G1 X105.197 Y94.275 E0.02476 ; perimeter
G1 X105.866 Y94.280 E0.03103 ; perimeter
G1 X106.405 Y94.309 E0.02498 ; perimeter
G1 X106.587 Y94.375 E0.00900 ; perimeter
G1 X106.627 Y94.410 E0.00245 ; perimeter
G1 X106.729 Y94.617 E0.01066 ; perimeter
G1 X106.723 Y94.757 E0.00649 ; perimeter
G1 X106.622 Y94.957 E0.01042 ; perimeter
G1 X106.361 Y95.084 E0.01343 ; perimeter
G1 X105.988 Y95.063 E0.01728 ; perimeter
G1 X105.603 Y94.979 E0.01830 ; perimeter
G1 X105.290 Y94.951 E0.01453 ; perimeter
G1 X104.774 Y95.021 E0.02414 ; perimeter
G1 X104.317 Y95.054 E0.02119 ; perimeter
G1 X103.936 Y94.970 E0.01809 ; perimeter
G1 X103.846 Y94.920 E0.00479 ; perimeter
G1 X103.825 Y94.797 F10800.000 ; move inwards before travel
G1 X103.984 Y94.581 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.438667
G1 F2400.000
G1 X104.350 Y94.611 E0.01206 ; infill
G1 X104.614 Y94.605 E0.00870 ; infill
;WIDTH:0.341537
G1 X105.014 Y94.617 E0.00994 ; infill
;WIDTH:0.23549
G1 X105.293 Y94.613 E0.00447 ; infill
;WIDTH:0.266012
G1 X105.663 Y94.631 E0.00687 ; infill
;WIDTH:0.296956
G1 X106.282 Y94.691 E0.01314 ; infill
G1 X106.468 Y94.633 E0.00412 ; infill
G1 X104.865 Y94.461 F10800.000 ; move to first infill point
;WIDTH:0.368444
G1 F2400.000
G1 X104.148 Y94.608 E0.01982 ; infill
;WIDTH:0.359179
G1 X104.002 Y94.545 E0.00419 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.148 Y94.608 E-0.04200 ; wipe and retract
;WIPE_END
G1 E-2.35800 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X109.321 Y95.746 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.318 Y95.583 E0.00755 ; perimeter
G1 X109.348 Y95.398 E0.00870 ; perimeter
G1 X109.427 Y95.319 E0.00516 ; perimeter
G1 X109.575 Y95.248 E0.00762 ; perimeter
G1 X109.729 Y95.217 E0.00729 ; perimeter
G1 X109.888 Y95.236 E0.00743 ; perimeter
G1 X110.208 Y95.393 E0.01651 ; perimeter
G1 X110.511 Y95.666 E0.01887 ; perimeter
G1 X110.879 Y96.058 E0.02493 ; perimeter
G1 X111.173 Y96.459 E0.02304 ; perimeter
G1 X111.742 Y96.817 E0.03112 ; perimeter
G1 X111.841 Y96.900 E0.00597 ; perimeter
G1 X111.977 Y97.144 E0.01293 ; perimeter
G1 X112.048 Y97.407 E0.01262 ; perimeter
G1 X112.027 Y97.573 E0.00775 ; perimeter
G1 X111.981 Y97.707 E0.00656 ; perimeter
G1 X111.919 Y97.773 E0.00422 ; perimeter
G1 X111.744 Y97.848 E0.00880 ; perimeter
G1 X111.661 Y97.842 E0.00385 ; perimeter
G1 X111.494 Y97.766 E0.00852 ; perimeter
G1 X111.304 Y97.530 E0.01402 ; perimeter
G1 X111.049 Y96.839 E0.03413 ; perimeter
G1 X110.875 Y96.690 E0.01060 ; perimeter
G1 X110.774 Y96.547 E0.00815 ; perimeter
G1 X110.532 Y96.451 E0.01205 ; perimeter
G1 X110.265 Y96.291 E0.01441 ; perimeter
G1 X109.848 Y96.104 E0.02117 ; perimeter
G1 X109.559 Y96.017 E0.01397 ; perimeter
G1 X109.368 Y95.842 E0.01200 ; perimeter
G1 X109.348 Y95.800 E0.00214 ; perimeter
G1 X109.438 Y95.632 F10800.000 ; move inwards before travel
G1 X109.592 Y95.507 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.319584
G1 F2400.000
G1 X109.698 Y95.610 E0.00340 ; infill
;WIDTH:0.351312
G1 X109.714 Y95.623 E0.00053 ; infill
;WIDTH:0.381113
G1 X109.746 Y95.632 E0.00093 ; infill
;WIDTH:0.397122
G1 X109.978 Y95.726 E0.00739 ; infill
;WIDTH:0.286994
G1 X110.639 Y96.155 E0.01599 ; infill
G1 X111.719 Y97.596 F10800.000 ; move to first infill point
;WIDTH:0.323525
G1 F2400.000
G1 X111.621 Y97.288 E0.00754 ; infill
G1 X111.552 Y97.139 E0.00384 ; infill
;WIDTH:0.298042
G1 X111.354 Y96.858 E0.00729 ; infill
G1 X111.346 Y96.859 F10800.000 ; move to first infill point
;WIDTH:0.23193
G1 F2400.000
G1 X111.705 Y97.501 E0.01155 ; infill
;WIDTH:0.218913
G1 X111.743 Y97.586 E0.00137 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.705 Y97.501 E-0.02468 ; wipe and retract
;WIPE_END
G1 E-2.37532 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X113.406 Y100.165 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.575 Y100.096 E0.00841 ; perimeter
G1 X113.724 Y100.089 E0.00693 ; perimeter
G1 X113.984 Y100.230 E0.01372 ; perimeter
G1 X114.036 Y100.278 E0.00328 ; perimeter
G1 X114.151 Y100.435 E0.00898 ; perimeter
G1 X114.190 Y100.538 E0.00514 ; perimeter
G1 X114.191 Y100.721 E0.00845 ; perimeter
G1 X114.106 Y100.899 E0.00916 ; perimeter
G1 X114.009 Y100.970 E0.00555 ; perimeter
G1 X113.841 Y100.997 E0.00789 ; perimeter
G1 X113.641 Y100.957 E0.00947 ; perimeter
G1 X113.499 Y100.875 E0.00757 ; perimeter
G1 X113.392 Y100.749 E0.00769 ; perimeter
G1 X113.303 Y100.470 E0.01355 ; perimeter
G1 X113.303 Y100.336 E0.00620 ; perimeter
G1 X113.380 Y100.219 E0.00651 ; perimeter
G1 X113.576 Y100.231 F10800.000 ; move inwards before travel
G1 X113.825 Y100.629 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.317095
G1 F2400.000
G1 X113.812 Y100.613 E0.00049 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.825 Y100.629 E-0.00563 ; wipe and retract
;WIPE_END
G1 E-2.39437 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 X115.295 Y105.947 ; move to first perimeter point
G1 Z22.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.367 Y105.917 E0.00359 ; perimeter
G1 X115.570 Y105.915 E0.00942 ; perimeter
G1 X115.670 Y105.950 E0.00489 ; perimeter
G1 X115.804 Y106.058 E0.00801 ; perimeter
G1 X115.870 Y106.183 E0.00650 ; perimeter
G1 X115.892 Y106.385 E0.00944 ; perimeter
G1 X115.767 Y107.209 E0.03857 ; perimeter
G1 X115.840 Y107.615 E0.01914 ; perimeter
G1 X115.871 Y108.287 E0.03114 ; perimeter
G1 X115.836 Y108.935 E0.03008 ; perimeter
G1 X115.663 Y109.765 E0.03929 ; perimeter
G1 X115.768 Y110.090 E0.01581 ; perimeter
G1 X115.896 Y110.671 E0.02753 ; perimeter
G1 X115.808 Y110.963 E0.01412 ; perimeter
G1 X115.731 Y111.039 E0.00502 ; perimeter
G1 X115.483 Y111.096 E0.01176 ; perimeter
G1 X115.376 Y111.071 E0.00511 ; perimeter
G1 X115.250 Y111.003 E0.00664 ; perimeter
G1 X115.176 Y110.899 E0.00592 ; perimeter
G1 X115.116 Y110.672 E0.01086 ; perimeter
G1 X115.130 Y110.430 E0.01126 ; perimeter
G1 X115.153 Y110.418 E0.00117 ; perimeter
G1 X115.213 Y110.036 E0.01790 ; perimeter
G1 X115.312 Y109.734 E0.01472 ; perimeter
G1 X115.256 Y109.176 E0.02595 ; perimeter
G1 X115.189 Y108.843 E0.01575 ; perimeter
G1 X115.151 Y108.174 E0.03103 ; perimeter
G1 X115.174 Y107.606 E0.02636 ; perimeter
G1 X115.243 Y107.084 E0.02439 ; perimeter
G1 X115.081 Y106.468 E0.02946 ; perimeter
G1 X115.077 Y106.318 E0.00699 ; perimeter
G1 X115.109 Y106.198 E0.00572 ; perimeter
G1 X115.167 Y106.085 E0.00591 ; perimeter
G1 X115.252 Y105.988 E0.00596 ; perimeter
G1 X115.364 Y105.982 F10800.000 ; move inwards before travel
G1 X115.495 Y107.189 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.13983
G1 F2400.000
G1 X115.499 Y107.337 E0.00120 ; infill
;WIDTH:0.182738
G1 X115.502 Y107.486 E0.00172 ; infill
;WIDTH:0.216583
G1 X115.515 Y108.801 E0.01900 ; infill
G1 X115.541 Y109.159 E0.00518 ; infill
G1 X115.498 Y110.631 F10800.000 ; move to first infill point
;WIDTH:0.319664
G1 F2400.000
G1 X115.500 Y110.596 E0.00082 ; infill
;WIDTH:0.301957
G1 X115.496 Y110.459 E0.00294 ; infill
;WIDTH:0.26194
G1 X115.492 Y110.323 E0.00248 ; infill
;WIDTH:0.221922
G1 X115.488 Y110.187 E0.00203 ; infill
;WIDTH:0.181905
G1 X115.484 Y110.050 E0.00158 ; infill
G1 X115.482 Y110.050 F10800.000 ; move to first infill point
;WIDTH:0.111323
G1 F2400.000
G1 X115.481 Y110.848 E0.00454 ; infill
;LAYER_CHANGE
;Z:22.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;22.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.482 Y110.050 E-0.21046 ; wipe and retract
;WIPE_END
G1 E-2.18954 F2400.000 ; retract
G1 Z22.675 F10800.000 ; lift Z
G1 Z22.800 ; move to next layer (113)
;AFTER_LAYER_CHANGE
;22.8
G1 Z22.875 ; lift Z
G1 X106.666 Y95.019 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.369 Y95.118 E0.01449 ; perimeter
G1 X105.255 Y95.015 E0.05183 ; perimeter
G1 X104.289 Y95.142 E0.04515 ; perimeter
G1 X103.754 Y95.136 E0.02475 ; perimeter
G1 X103.524 Y95.311 E0.01341 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.500 Y95.330 E0.00129 ; perimeter (bridge)
G1 X103.508 Y95.303 E0.00120 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.559 Y95.146 E0.00761 ; perimeter
G1 X103.744 Y95.063 E0.00940 ; perimeter
G1 X103.788 Y94.772 E0.01362 ; perimeter
G1 X104.020 Y94.367 E0.02160 ; perimeter
G1 X104.103 Y94.297 E0.00507 ; perimeter
G1 X104.388 Y94.208 E0.01382 ; perimeter
G1 X104.700 Y94.195 E0.01445 ; perimeter
G1 X105.210 Y94.231 E0.02369 ; perimeter
G1 X105.418 Y94.270 E0.00983 ; perimeter
G1 X106.369 Y94.317 E0.04408 ; perimeter
G1 X106.612 Y94.409 E0.01206 ; perimeter
G1 X106.664 Y94.453 E0.00315 ; perimeter
G1 X106.743 Y94.614 E0.00828 ; perimeter
G1 X106.756 Y94.792 E0.00826 ; perimeter
G1 X106.693 Y94.966 E0.00858 ; perimeter
G1 X106.375 Y94.906 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.369 Y95.118 E-0.09446 ; wipe and retract
G1 X105.255 Y95.015 E-0.29530 ; wipe and retract
G1 X104.289 Y95.142 E-0.25719 ; wipe and retract
G1 X103.754 Y95.136 E-0.14098 ; wipe and retract
G1 X103.524 Y95.311 E-0.07640 ; wipe and retract
;WIPE_END
G1 E-1.53566 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X100.160 Y98.549 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.387 Y99.017 E0.02410 ; perimeter
G1 X100.499 Y99.384 E0.01781 ; perimeter
G1 X100.540 Y99.717 E0.01552 ; perimeter
G1 X100.515 Y100.003 E0.01331 ; perimeter
G1 X100.422 Y100.285 E0.01375 ; perimeter
G1 X100.266 Y100.483 E0.01168 ; perimeter
G1 X100.154 Y100.543 E0.00586 ; perimeter
G1 X100.086 Y100.539 E0.00314 ; perimeter
G1 X99.879 Y100.350 E0.01300 ; perimeter
G1 X99.755 Y100.135 E0.01149 ; perimeter
G1 X99.712 Y99.952 E0.00869 ; perimeter
G1 X99.677 Y99.490 E0.02146 ; perimeter
G1 X99.696 Y99.003 E0.02257 ; perimeter
G1 X99.772 Y98.643 E0.01708 ; perimeter
G1 X99.871 Y98.440 E0.01046 ; perimeter
G1 X100.014 Y97.638 E0.03771 ; perimeter
G1 X100.116 Y97.454 E0.00972 ; perimeter
G1 X100.174 Y97.304 E0.00748 ; perimeter
G1 X100.294 Y97.147 E0.00915 ; perimeter
G1 X100.492 Y96.968 E0.01233 ; perimeter
G1 X100.693 Y96.841 E0.01103 ; perimeter
G1 X100.820 Y96.708 E0.00852 ; perimeter
G1 X100.960 Y96.615 E0.00777 ; perimeter
G1 X101.288 Y96.224 E0.02366 ; perimeter
G1 X101.437 Y95.982 E0.01318 ; perimeter
G1 X101.548 Y95.864 E0.00750 ; perimeter
G1 X101.729 Y95.545 E0.01700 ; perimeter
G1 X101.952 Y95.353 E0.01363 ; perimeter
G1 X102.181 Y95.252 E0.01158 ; perimeter
G1 X102.256 Y95.238 E0.00356 ; perimeter
G1 X102.615 Y95.232 E0.01664 ; perimeter
G1 X102.905 Y95.279 E0.01358 ; perimeter
G1 X103.102 Y95.283 E0.00911 ; perimeter
G1 X103.379 Y95.422 E0.01436 ; perimeter
G1 X103.226 Y95.645 E0.01251 ; perimeter
G1 X102.919 Y95.907 E0.01868 ; perimeter
G1 X102.740 Y96.013 E0.00962 ; perimeter
G1 X102.463 Y96.136 E0.01404 ; perimeter
G1 X101.998 Y96.484 E0.02692 ; perimeter
G1 X101.390 Y97.128 E0.04102 ; perimeter
G1 X101.004 Y97.594 E0.02804 ; perimeter
G1 X100.770 Y97.800 E0.01445 ; perimeter
G1 X100.598 Y97.859 E0.00839 ; perimeter
G1 X100.335 Y98.117 E0.01709 ; perimeter
G1 X100.218 Y98.326 E0.01109 ; perimeter
G1 X100.175 Y98.490 E0.00787 ; perimeter
G1 X99.853 Y98.805 F10800.000 ; move inwards before travel
G1 X100.004 Y98.778 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.316785
G1 F2400.000
G1 X100.033 Y99.009 E0.00530 ; infill
;WIDTH:0.352852
G1 X100.063 Y99.240 E0.00600 ; infill
;WIDTH:0.375198
G1 X100.117 Y99.725 E0.01348 ; infill
G1 X100.142 Y100.251 E0.01456 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.117 Y99.725 E-0.13910 ; wipe and retract
G1 X100.063 Y99.240 E-0.12873 ; wipe and retract
;WIPE_END
G1 E-2.13217 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X100.229 Y97.807 ; move to first infill point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.326413
G1 F2400.000
G1 X100.591 Y97.421 E0.01247 ; infill
G1 X100.912 Y97.133 E0.01018 ; infill
;WIDTH:0.226536
G1 X101.191 Y96.855 E0.00602 ; infill
;WIDTH:0.25895
G1 X101.576 Y96.422 E0.01040 ; infill
;WIDTH:0.286176
G1 X101.657 Y96.317 E0.00267 ; infill
;WIDTH:0.315336
G1 X101.755 Y96.194 E0.00357 ; infill
;WIDTH:0.336754
G1 X101.850 Y96.110 E0.00310 ; infill
;WIDTH:0.347574
G1 X101.876 Y96.083 E0.00094 ; infill
G1 X101.836 Y95.846 F10800.000 ; move to first infill point
;WIDTH:0.384973
G1 F2400.000
G1 X102.971 Y95.528 E0.03355 ; infill
G1 X102.762 Y95.500 F10800.000 ; move to first infill point
;WIDTH:0.483552
G1 F2400.000
G1 X102.202 Y95.750 E0.02246 ; infill
G1 X101.531 Y96.290 E0.03156 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.202 Y95.750 E-0.22734 ; wipe and retract
G1 X102.762 Y95.500 E-0.16174 ; wipe and retract
;WIPE_END
G1 E-2.01092 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X104.093 Y94.742 ; move to first infill point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.449796
G1 F2400.000
G1 X104.466 Y94.660 E0.01292 ; infill
G1 X104.926 Y94.633 E0.01558 ; infill
;WIDTH:0.31802
G1 X105.231 Y94.628 E0.00699 ; infill
G1 X105.383 Y94.647 E0.00349 ; infill
;WIDTH:0.355742
G1 X106.299 Y94.714 E0.02390 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.383 Y94.647 E-0.24248 ; wipe and retract
;WIPE_END
G1 E-2.15752 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X111.232 Y97.072 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.430 Y96.797 E0.01570 ; perimeter
G1 X111.634 Y96.860 E0.00985 ; perimeter
G1 X111.872 Y97.024 E0.01340 ; perimeter
G1 X112.008 Y97.240 E0.01183 ; perimeter
G1 X112.088 Y97.518 E0.01339 ; perimeter
G1 X112.073 Y97.725 E0.00964 ; perimeter
G1 X112.041 Y97.853 E0.00609 ; perimeter
G1 X111.946 Y97.971 E0.00702 ; perimeter
G1 X111.730 Y97.981 E0.01004 ; perimeter
G1 X111.562 Y97.920 E0.00829 ; perimeter
G1 X111.421 Y97.786 E0.00900 ; perimeter
G1 X111.332 Y97.622 E0.00864 ; perimeter
G1 X111.317 Y97.526 E0.00450 ; perimeter
G1 X111.257 Y97.365 E0.00796 ; perimeter
G1 X111.268 Y97.171 E0.00898 ; perimeter
G1 X111.252 Y97.128 E0.00210 ; perimeter
G1 X111.568 Y97.026 F10800.000 ; move inwards before travel
G1 X110.625 Y96.193 ; move to first perimeter point
G1 F1800.000
G1 X110.505 Y96.157 E0.00580 ; perimeter
G1 X110.185 Y96.129 E0.01490 ; perimeter
G1 X110.026 Y96.060 E0.00804 ; perimeter
G1 X109.740 Y96.080 E0.01327 ; perimeter
G1 X109.612 Y96.035 E0.00631 ; perimeter
G1 X109.452 Y96.011 E0.00746 ; perimeter
G1 X109.328 Y95.889 E0.00806 ; perimeter
G1 X109.271 Y95.741 E0.00735 ; perimeter
G1 X109.278 Y95.592 E0.00691 ; perimeter
G1 X109.353 Y95.424 E0.00851 ; perimeter
G1 X109.438 Y95.340 E0.00553 ; perimeter
G1 X109.565 Y95.281 E0.00650 ; perimeter
G1 X109.769 Y95.258 E0.00950 ; perimeter
G1 X109.854 Y95.270 E0.00401 ; perimeter
G1 X110.107 Y95.386 E0.01288 ; perimeter
G1 X110.300 Y95.566 E0.01222 ; perimeter
G1 X110.317 Y95.616 E0.00245 ; perimeter
G1 X110.521 Y95.866 E0.01494 ; perimeter
G1 X110.532 Y95.974 E0.00502 ; perimeter
G1 X110.631 Y96.102 E0.00749 ; perimeter
G1 X110.629 Y96.133 E0.00145 ; perimeter
G1 X110.521 Y96.124 F10800.000 ; move inwards before travel
G1 X109.670 Y95.656 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.328293
G1 F2400.000
G1 X109.645 Y95.669 E0.00067 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.670 Y95.656 E-0.00748 ; wipe and retract
;WIPE_END
G1 E-2.39252 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X111.509 Y97.174 ; move to first infill point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.162644
G1 F2400.000
G1 X111.806 Y97.736 E0.00633 ; infill
G1 X111.754 Y97.733 F10800.000 ; move to first infill point
;WIDTH:0.298139
G1 F2400.000
G1 X111.674 Y97.420 E0.00686 ; infill
G1 X111.623 Y97.309 E0.00259 ; infill
;WIDTH:0.285082
G1 X111.571 Y97.110 E0.00415 ; infill
G1 X111.517 Y97.096 F10800.000 ; move to first infill point
;WIDTH:0.103034
G1 F2400.000
G1 X111.540 Y97.124 E0.00018 ; infill
;WIDTH:0.114645
G1 X111.840 Y97.612 E0.00341 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.540 Y97.124 E-0.15099 ; wipe and retract
;WIPE_END
G1 E-2.24901 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X113.371 Y100.018 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.475 Y99.972 E0.00527 ; perimeter
G1 X113.682 Y100.007 E0.00972 ; perimeter
G1 X113.870 Y100.109 E0.00990 ; perimeter
G1 X114.043 Y100.288 E0.01156 ; perimeter
G1 X114.137 Y100.493 E0.01045 ; perimeter
G1 X114.140 Y100.633 E0.00649 ; perimeter
G1 X114.056 Y100.819 E0.00945 ; perimeter
G1 X113.944 Y100.908 E0.00663 ; perimeter
G1 X113.733 Y100.929 E0.00983 ; perimeter
G1 X113.592 Y100.907 E0.00659 ; perimeter
G1 X113.448 Y100.822 E0.00772 ; perimeter
G1 X113.288 Y100.617 E0.01208 ; perimeter
G1 X113.235 Y100.437 E0.00869 ; perimeter
G1 X113.235 Y100.292 E0.00671 ; perimeter
G1 X113.211 Y100.198 E0.00451 ; perimeter
G1 X113.311 Y100.014 E0.00972 ; perimeter
G1 X113.476 Y100.062 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.475 Y99.972 E-0.04463 ; wipe and retract
G1 X113.682 Y100.007 E-0.05538 ; wipe and retract
G1 X113.870 Y100.109 E-0.05642 ; wipe and retract
G1 X114.043 Y100.288 E-0.06583 ; wipe and retract
G1 X114.137 Y100.493 E-0.05951 ; wipe and retract
G1 X114.140 Y100.633 E-0.03696 ; wipe and retract
G1 X114.056 Y100.819 E-0.05381 ; wipe and retract
G1 X113.944 Y100.908 E-0.03778 ; wipe and retract
G1 X113.733 Y100.929 E-0.05602 ; wipe and retract
G1 X113.592 Y100.907 E-0.03752 ; wipe and retract
G1 X113.448 Y100.822 E-0.04400 ; wipe and retract
G1 X113.288 Y100.617 E-0.06880 ; wipe and retract
G1 X113.235 Y100.437 E-0.04948 ; wipe and retract
G1 X113.235 Y100.292 E-0.03821 ; wipe and retract
G1 X113.211 Y100.198 E-0.02570 ; wipe and retract
G1 X113.311 Y100.014 E-0.05538 ; wipe and retract
;WIPE_END
G1 E-1.61457 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X115.391 Y107.066 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.295 Y106.977 E0.00609 ; perimeter
G1 X115.254 Y106.738 E0.01122 ; perimeter
G1 X115.162 Y106.603 E0.00758 ; perimeter
G1 X115.119 Y106.415 E0.00895 ; perimeter
G1 X115.079 Y106.341 E0.00386 ; perimeter
G1 X115.076 Y106.223 E0.00547 ; perimeter
G1 X115.184 Y105.985 E0.01209 ; perimeter
G1 X115.292 Y105.881 E0.00697 ; perimeter
G1 X115.373 Y105.848 E0.00402 ; perimeter
G1 X115.541 Y105.842 E0.00781 ; perimeter
G1 X115.609 Y105.860 E0.00328 ; perimeter
G1 X115.798 Y105.997 E0.01079 ; perimeter
G1 X115.866 Y106.120 E0.00651 ; perimeter
G1 X115.886 Y106.286 E0.00776 ; perimeter
G1 X115.853 Y106.561 E0.01281 ; perimeter
G1 X115.799 Y106.681 E0.00612 ; perimeter
G1 X115.644 Y106.895 E0.01224 ; perimeter
G1 X115.634 Y107.269 E0.01735 ; perimeter
G1 X115.711 Y107.437 E0.00854 ; perimeter
G1 X115.789 Y107.806 E0.01744 ; perimeter
G1 X115.795 Y108.116 E0.01440 ; perimeter
G1 X115.862 Y108.491 E0.01760 ; perimeter
G1 X115.846 Y109.303 E0.03766 ; perimeter
G1 X115.793 Y109.615 E0.01465 ; perimeter
G1 X115.810 Y109.950 E0.01552 ; perimeter
G1 X115.895 Y110.411 E0.02174 ; perimeter
G1 X115.904 Y110.592 E0.00837 ; perimeter
G1 X115.812 Y110.909 E0.01529 ; perimeter
G1 X115.736 Y110.989 E0.00513 ; perimeter
G1 X115.514 Y111.051 E0.01063 ; perimeter
G1 X115.370 Y111.021 E0.00681 ; perimeter
G1 X115.244 Y110.952 E0.00670 ; perimeter
G1 X115.180 Y110.862 E0.00510 ; perimeter
G1 X115.112 Y110.627 E0.01135 ; perimeter
G1 X115.123 Y110.235 E0.01816 ; perimeter
G1 X115.173 Y109.976 E0.01218 ; perimeter
G1 X115.202 Y109.437 E0.02504 ; perimeter
G1 X115.163 Y108.998 E0.02041 ; perimeter
G1 X115.184 Y108.686 E0.01450 ; perimeter
G1 X115.177 Y108.280 E0.01877 ; perimeter
G1 X115.197 Y108.025 E0.01187 ; perimeter
G1 X115.251 Y107.793 E0.01102 ; perimeter
G1 X115.306 Y107.290 E0.02344 ; perimeter
G1 X115.370 Y107.122 E0.00833 ; perimeter
G1 X115.461 Y106.955 F10800.000 ; move inwards before travel
G1 X115.517 Y107.793 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.102943
G1 F2400.000
G1 X115.519 Y107.841 E0.00024 ; infill
;WIDTH:0.13202
G1 X115.506 Y107.956 E0.00086 ; infill
;WIDTH:0.158903
G1 X115.492 Y108.141 E0.00179 ; infill
G1 X115.521 Y108.517 E0.00364 ; infill
G1 X115.518 Y109.272 E0.00728 ; infill
G1 X115.493 Y109.604 E0.00320 ; infill
;WIDTH:0.200223
G1 X115.493 Y109.992 E0.00508 ; infill
;WIDTH:0.208075
G1 X115.494 Y110.022 E0.00041 ; infill
;WIDTH:0.255235
G1 X115.494 Y110.149 E0.00224 ; infill
;WIDTH:0.302394
G1 X115.493 Y110.275 E0.00273 ; infill
;WIDTH:0.347511
G1 X115.508 Y110.546 E0.00685 ; infill
G1 X115.469 Y110.795 E0.00640 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.508 Y110.546 E-0.06669 ; wipe and retract
G1 X115.493 Y110.275 E-0.07137 ; wipe and retract
;WIPE_END
G1 E-2.26194 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X115.452 Y114.646 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.537 Y114.682 E0.00426 ; perimeter
G1 X115.628 Y114.758 E0.00551 ; perimeter
G1 X115.706 Y114.880 E0.00671 ; perimeter
G1 X115.735 Y114.981 E0.00488 ; perimeter
G1 X115.722 Y115.118 E0.00636 ; perimeter
G1 X115.636 Y115.314 E0.00992 ; perimeter
G1 X115.551 Y115.420 E0.00628 ; perimeter
G1 X115.441 Y115.512 E0.00665 ; perimeter
G1 X115.278 Y115.575 E0.00809 ; perimeter
G1 X115.130 Y115.572 E0.00688 ; perimeter
G1 X114.969 Y115.506 E0.00805 ; perimeter
G1 X114.862 Y115.401 E0.00695 ; perimeter
G1 X114.723 Y115.197 E0.01143 ; perimeter
G1 X114.721 Y115.122 E0.00347 ; perimeter
G1 X114.806 Y114.957 E0.00858 ; perimeter
G1 X115.030 Y114.734 E0.01466 ; perimeter
G1 X115.175 Y114.657 E0.00759 ; perimeter
G1 X115.269 Y114.636 E0.00444 ; perimeter
G1 X115.392 Y114.642 E0.00572 ; perimeter
G1 X115.476 Y114.734 F10800.000 ; move inwards before travel
G1 X115.341 Y115.025 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.37117
G1 F2400.000
G1 X115.312 Y115.043 E0.00093 ; infill
;WIDTH:0.4003
G1 X115.282 Y115.076 E0.00131 ; infill
;WIDTH:0.41019
G1 X115.211 Y115.149 E0.00312 ; infill
G1 X113.822 Y114.898 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.844 Y115.122 E0.01042 ; perimeter
G1 X113.756 Y115.333 E0.01064 ; perimeter
G1 X113.596 Y115.460 E0.00942 ; perimeter
G1 X113.395 Y115.502 E0.00953 ; perimeter
G1 X113.248 Y115.462 E0.00702 ; perimeter
G1 X112.955 Y115.261 E0.01648 ; perimeter
G1 X112.789 Y115.034 E0.01302 ; perimeter
G1 X112.753 Y114.815 E0.01030 ; perimeter
G1 X112.801 Y114.694 E0.00600 ; perimeter
G1 X112.910 Y114.612 E0.00633 ; perimeter
G1 X113.238 Y114.552 E0.01544 ; perimeter
G1 X113.477 Y114.613 E0.01144 ; perimeter
G1 X113.725 Y114.771 E0.01362 ; perimeter
G1 X113.786 Y114.850 E0.00462 ; perimeter
G1 X113.680 Y115.071 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.844 Y115.122 E-0.07327 ; wipe and retract
G1 X113.756 Y115.333 E-0.06061 ; wipe and retract
G1 X113.596 Y115.460 E-0.05367 ; wipe and retract
G1 X113.395 Y115.502 E-0.05432 ; wipe and retract
G1 X113.248 Y115.462 E-0.04002 ; wipe and retract
G1 X112.955 Y115.261 E-0.09389 ; wipe and retract
G1 X112.789 Y115.034 E-0.07415 ; wipe and retract
G1 X112.753 Y114.815 E-0.05869 ; wipe and retract
G1 X112.801 Y114.694 E-0.03417 ; wipe and retract
G1 X112.910 Y114.612 E-0.03608 ; wipe and retract
G1 X113.238 Y114.552 E-0.08798 ; wipe and retract
G1 X113.477 Y114.613 E-0.06519 ; wipe and retract
G1 X113.725 Y114.771 E-0.07760 ; wipe and retract
G1 X113.786 Y114.850 E-0.02633 ; wipe and retract
;WIPE_END
G1 E-1.56402 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X109.693 Y111.140 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.392 Y111.197 E0.01420 ; perimeter
G1 X109.166 Y111.122 E0.01099 ; perimeter
G1 X109.073 Y111.109 E0.00438 ; perimeter
G1 X108.588 Y110.876 E0.02491 ; perimeter
G1 X108.278 Y110.625 E0.01847 ; perimeter
G1 X108.213 Y110.531 E0.00532 ; perimeter
G1 X107.782 Y110.105 E0.02806 ; perimeter
G1 X107.585 Y110.075 E0.00921 ; perimeter
G1 X107.420 Y109.978 E0.00886 ; perimeter
G1 X107.153 Y109.939 E0.01253 ; perimeter
G1 X106.846 Y109.832 E0.01504 ; perimeter
G1 X106.600 Y109.701 E0.01294 ; perimeter
G1 X106.392 Y109.550 E0.01188 ; perimeter
G1 X106.199 Y109.329 E0.01357 ; perimeter
G1 X106.137 Y109.179 E0.00754 ; perimeter
G1 X106.132 Y109.046 E0.00617 ; perimeter
G1 X106.152 Y109.020 E0.00151 ; perimeter
G1 X106.346 Y108.944 E0.00966 ; perimeter
G1 X106.661 Y108.941 E0.01456 ; perimeter
G1 X106.941 Y109.005 E0.01330 ; perimeter
G1 X107.217 Y109.119 E0.01382 ; perimeter
G1 X107.474 Y109.256 E0.01350 ; perimeter
G1 X108.063 Y109.743 E0.03544 ; perimeter
G1 X108.252 Y109.809 E0.00926 ; perimeter
G1 X108.807 Y110.073 E0.02846 ; perimeter
G1 X109.264 Y110.438 E0.02709 ; perimeter
G1 X109.407 Y110.659 E0.01219 ; perimeter
G1 X109.460 Y110.797 E0.00688 ; perimeter
G1 X109.659 Y111.091 E0.01642 ; perimeter
G1 X109.394 Y111.073 F10800.000 ; move inwards before travel
G1 X109.737 Y111.156 ; move to first perimeter point
G1 F1800.000
G1 X110.204 Y111.315 E0.02284 ; perimeter
G1 X110.592 Y111.345 E0.01802 ; perimeter
G1 X110.908 Y111.473 E0.01582 ; perimeter
G1 X111.283 Y111.715 E0.02064 ; perimeter
G1 X111.586 Y112.001 E0.01930 ; perimeter
G1 X111.685 Y112.151 E0.00833 ; perimeter
G1 X112.124 Y112.535 E0.02704 ; perimeter
G1 X112.221 Y112.733 E0.01018 ; perimeter
G1 X112.227 Y112.885 E0.00707 ; perimeter
G1 X112.211 Y112.999 E0.00532 ; perimeter
G1 X112.128 Y113.162 E0.00848 ; perimeter
G1 X112.030 Y113.251 E0.00614 ; perimeter
G1 X111.894 Y113.311 E0.00688 ; perimeter
G1 X111.723 Y113.318 E0.00791 ; perimeter
G1 X111.604 Y113.275 E0.00588 ; perimeter
G1 X111.479 Y113.163 E0.00776 ; perimeter
G1 X111.436 Y113.075 E0.00451 ; perimeter
G1 X111.358 Y112.982 E0.00561 ; perimeter
G1 X111.295 Y112.775 E0.01001 ; perimeter
G1 X111.207 Y112.678 E0.00611 ; perimeter
G1 X111.209 Y112.605 E0.00338 ; perimeter
G1 X110.772 Y112.293 E0.02489 ; perimeter
G1 X110.598 Y112.217 E0.00878 ; perimeter
G1 X110.230 Y111.963 E0.02071 ; perimeter
G1 X110.036 Y111.756 E0.01314 ; perimeter
G1 X109.949 Y111.598 E0.00837 ; perimeter
G1 X109.861 Y111.508 E0.00580 ; perimeter
G1 X109.757 Y111.212 E0.01454 ; perimeter
G1 X110.069 Y111.379 F10800.000 ; move inwards before travel
G1 X110.238 Y111.612 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.296202
G1 F2400.000
G1 X110.507 Y111.707 E0.00600 ; infill
;WIDTH:0.326838
G1 X110.972 Y111.968 E0.01260 ; infill
G1 X111.308 Y112.234 E0.01011 ; infill
;WIDTH:0.210604
G1 X111.501 Y112.418 E0.00371 ; infill
;WIDTH:0.239117
G1 X111.942 Y113.005 E0.01199 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.501 Y112.418 E-0.19391 ; wipe and retract
;WIPE_END
G1 E-2.20609 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X108.639 Y110.260 ; move to first infill point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.174078
G1 F2400.000
G1 X109.212 Y110.885 E0.00925 ; infill
G1 X109.208 Y110.812 F10800.000 ; move to first infill point
;WIDTH:0.298964
G1 F2400.000
G1 X108.794 Y110.551 E0.01041 ; infill
G1 X108.612 Y110.404 E0.00499 ; infill
G1 X108.101 Y110.081 E0.01287 ; infill
G1 X107.620 Y109.690 F10800.000 ; move to first infill point
;WIDTH:0.325021
G1 F2400.000
G1 X107.244 Y109.566 E0.00929 ; infill
G1 X106.822 Y109.378 E0.01085 ; infill
G1 X106.434 Y109.231 E0.00972 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.822 Y109.378 E-0.10936 ; wipe and retract
G1 X107.244 Y109.566 E-0.12209 ; wipe and retract
G1 X107.620 Y109.690 E-0.10457 ; wipe and retract
;WIPE_END
G1 E-2.06398 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X103.291 Y107.063 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.207 Y107.131 E0.00501 ; perimeter
G1 X103.025 Y107.194 E0.00892 ; perimeter
G1 X102.774 Y107.159 E0.01175 ; perimeter
G1 X102.644 Y107.097 E0.00666 ; perimeter
G1 X102.360 Y106.880 E0.01658 ; perimeter
G1 X102.136 Y106.607 E0.01635 ; perimeter
G1 X102.066 Y106.486 E0.00646 ; perimeter
G1 X101.703 Y106.069 E0.02561 ; perimeter
G1 X101.371 Y105.738 E0.02171 ; perimeter
G1 X101.304 Y105.702 E0.00352 ; perimeter
G1 X101.077 Y105.475 E0.01487 ; perimeter
G1 X100.901 Y105.340 E0.01029 ; perimeter
G1 X100.778 Y105.179 E0.00940 ; perimeter
G1 X100.712 Y105.016 E0.00810 ; perimeter
G1 X100.700 Y104.702 E0.01457 ; perimeter
G1 X100.866 Y104.168 E0.02591 ; perimeter
G1 X100.855 Y103.934 E0.01087 ; perimeter
G1 X100.905 Y104.082 E0.00725 ; perimeter
G1 X101.298 Y104.406 E0.02357 ; perimeter
G1 X101.514 Y104.740 E0.01847 ; perimeter
G1 X101.510 Y104.943 E0.00939 ; perimeter
G1 X101.660 Y105.218 E0.01452 ; perimeter
G1 X101.644 Y105.287 E0.00326 ; perimeter
G1 X101.853 Y105.641 E0.01905 ; perimeter
G1 X102.237 Y105.986 E0.02392 ; perimeter
G1 X102.351 Y106.010 E0.00540 ; perimeter
G1 X102.485 Y106.111 E0.00776 ; perimeter
G1 X102.662 Y106.122 E0.00822 ; perimeter
G1 X102.755 Y106.190 E0.00534 ; perimeter
G1 X103.008 Y106.289 E0.01259 ; perimeter
G1 X103.231 Y106.465 E0.01314 ; perimeter
G1 X103.369 Y106.712 E0.01309 ; perimeter
G1 X103.380 Y106.896 E0.00855 ; perimeter
G1 X103.312 Y107.007 E0.00604 ; perimeter
G1 X103.184 Y107.047 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.207 Y107.131 E-0.04289 ; wipe and retract
G1 X103.025 Y107.194 E-0.05080 ; wipe and retract
G1 X102.774 Y107.159 E-0.06692 ; wipe and retract
G1 X102.644 Y107.097 E-0.03794 ; wipe and retract
G1 X102.360 Y106.880 E-0.09444 ; wipe and retract
G1 X102.136 Y106.607 E-0.09316 ; wipe and retract
G1 X102.066 Y106.486 E-0.03681 ; wipe and retract
G1 X101.703 Y106.069 E-0.14589 ; wipe and retract
G1 X101.371 Y105.738 E-0.12371 ; wipe and retract
G1 X101.304 Y105.702 E-0.02005 ; wipe and retract
G1 X101.077 Y105.475 E-0.08471 ; wipe and retract
G1 X100.901 Y105.340 E-0.05860 ; wipe and retract
G1 X100.778 Y105.179 E-0.05352 ; wipe and retract
G1 X100.712 Y105.016 E-0.04616 ; wipe and retract
G1 X100.700 Y104.702 E-0.08300 ; wipe and retract
G1 X100.866 Y104.168 E-0.14762 ; wipe and retract
G1 X100.855 Y103.934 E-0.06192 ; wipe and retract
G1 X100.905 Y104.082 E-0.04132 ; wipe and retract
G1 X101.298 Y104.406 E-0.13428 ; wipe and retract
G1 X101.514 Y104.740 E-0.10521 ; wipe and retract
G1 X101.510 Y104.943 E-0.05347 ; wipe and retract
G1 X101.660 Y105.218 E-0.08270 ; wipe and retract
G1 X101.644 Y105.287 E-0.01855 ; wipe and retract
G1 X101.853 Y105.641 E-0.10853 ; wipe and retract
G1 X102.237 Y105.986 E-0.13626 ; wipe and retract
G1 X102.351 Y106.010 E-0.03076 ; wipe and retract
G1 X102.485 Y106.111 E-0.04422 ; wipe and retract
G1 X102.662 Y106.122 E-0.04685 ; wipe and retract
G1 X102.755 Y106.190 E-0.03039 ; wipe and retract
G1 X103.008 Y106.289 E-0.07175 ; wipe and retract
G1 X103.231 Y106.465 E-0.07488 ; wipe and retract
G1 X103.328 Y106.639 E-0.05268 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 X100.838 Y103.883 ; move to first perimeter point
G1 Z22.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.633 Y103.664 E0.01390 ; perimeter
G1 X100.452 Y103.537 E0.01021 ; perimeter
G1 X100.245 Y103.342 E0.01320 ; perimeter
G1 X100.157 Y103.131 E0.01057 ; perimeter
G1 X100.150 Y102.977 E0.00715 ; perimeter
G1 X100.223 Y102.741 E0.01146 ; perimeter
G1 X100.323 Y102.634 E0.00675 ; perimeter
G1 X100.508 Y102.576 E0.00899 ; perimeter
G1 X100.671 Y102.572 E0.00758 ; perimeter
G1 X100.796 Y102.641 E0.00659 ; perimeter
G1 X100.870 Y102.720 E0.00501 ; perimeter
G1 X100.944 Y102.889 E0.00854 ; perimeter
G1 X100.954 Y103.084 E0.00905 ; perimeter
G1 X100.802 Y103.777 E0.03285 ; perimeter
G1 X100.819 Y103.826 E0.00240 ; perimeter
G1 X100.706 Y103.613 F10800.000 ; move inwards before travel
G1 X101.118 Y104.582 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.370272
G1 F2400.000
G1 X101.109 Y104.931 E0.00951 ; infill
;WIDTH:0.361189
G1 X101.116 Y104.980 E0.00132 ; infill
;WIDTH:0.337664
G1 X101.150 Y105.056 E0.00202 ; infill
;WIDTH:0.301542
G1 X101.425 Y105.480 E0.01088 ; infill
G1 X101.443 Y105.466 F10800.000 ; move to first infill point
;WIDTH:0.128327
G1 F2400.000
G1 X101.350 Y105.347 E0.00107 ; infill
G1 X101.319 Y105.264 E0.00063 ; infill
G1 X100.945 Y104.794 E0.00427 ; infill
G1 X102.290 Y106.266 F10800.000 ; move to first infill point
;WIDTH:0.324116
G1 F2400.000
G1 X102.555 Y106.516 E0.00852 ; infill
;WIDTH:0.338257
G1 X103.053 Y106.929 E0.01589 ; infill
;LAYER_CHANGE
;Z:23
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;23
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.555 Y106.516 E-0.17072 ; wipe and retract
;WIPE_END
G1 E-2.22928 F2400.000 ; retract
G1 Z22.875 F10800.000 ; lift Z
G1 Z23.000 ; move to next layer (114)
;AFTER_LAYER_CHANGE
;23
G1 X102.247 Y106.492 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.285 Y106.309 E0.00864 ; perimeter
G1 X102.561 Y106.241 E0.01318 ; perimeter
G1 X102.911 Y106.272 E0.01624 ; perimeter
G1 X103.186 Y106.377 E0.01364 ; perimeter
G1 X103.354 Y106.498 E0.00962 ; perimeter
G1 X103.489 Y106.725 E0.01222 ; perimeter
G1 X103.482 Y106.867 E0.00658 ; perimeter
G1 X103.420 Y107.048 E0.00889 ; perimeter
G1 X103.373 Y107.081 E0.00266 ; perimeter
G1 X103.042 Y107.172 E0.01590 ; perimeter
G1 X102.884 Y107.175 E0.00733 ; perimeter
G1 X102.726 Y107.100 E0.00812 ; perimeter
G1 X102.505 Y106.928 E0.01294 ; perimeter
G1 X102.271 Y106.547 E0.02072 ; perimeter
G1 X102.400 Y106.385 F10800.000 ; move inwards before travel
G1 X101.475 Y105.483 ; move to first perimeter point
G1 F1800.000
G1 X101.380 Y105.431 E0.00503 ; perimeter
G1 X101.305 Y105.447 E0.00356 ; perimeter
G1 X100.999 Y105.287 E0.01600 ; perimeter
G1 X100.834 Y105.144 E0.01011 ; perimeter
G1 X100.773 Y105.064 E0.00468 ; perimeter
G1 X100.703 Y104.882 E0.00902 ; perimeter
G1 X100.684 Y104.566 E0.01466 ; perimeter
G1 X100.786 Y104.172 E0.01885 ; perimeter
G1 X100.769 Y103.777 E0.01831 ; perimeter
G1 X100.243 Y103.252 E0.03443 ; perimeter
G1 X100.162 Y103.036 E0.01070 ; perimeter
G1 X100.159 Y102.972 E0.00296 ; perimeter
G1 X100.233 Y102.671 E0.01439 ; perimeter
G1 X100.322 Y102.574 E0.00607 ; perimeter
G1 X100.482 Y102.511 E0.00795 ; perimeter
G1 X100.652 Y102.500 E0.00787 ; perimeter
G1 X100.805 Y102.584 E0.00810 ; perimeter
G1 X100.903 Y102.698 E0.00693 ; perimeter
G1 X100.958 Y102.843 E0.00720 ; perimeter
G1 X100.957 Y103.079 E0.01096 ; perimeter
G1 X100.860 Y103.599 E0.02449 ; perimeter
G1 X100.911 Y103.773 E0.00840 ; perimeter
G1 X101.032 Y104.016 E0.01257 ; perimeter
G1 X101.275 Y104.251 E0.01565 ; perimeter
G1 X101.465 Y104.552 E0.01648 ; perimeter
G1 X101.500 Y104.757 E0.00961 ; perimeter
G1 X101.478 Y105.002 E0.01139 ; perimeter
G1 X101.538 Y105.113 E0.00587 ; perimeter
G1 X101.485 Y105.424 E0.01462 ; perimeter
G1 X101.404 Y105.401 F10800.000 ; move inwards before travel
G1 X101.246 Y105.150 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.154215
G1 F2400.000
G1 X101.176 Y105.049 E0.00114 ; infill
G1 X100.951 Y104.499 E0.00550 ; infill
G1 X101.093 Y105.049 F10800.000 ; move to first infill point
;WIDTH:0.360842
G1 F2400.000
G1 X101.097 Y104.773 E0.00730 ; infill
G1 X101.050 Y104.369 E0.01075 ; infill
G1 X100.974 Y104.409 F10800.000 ; move to first infill point
;WIDTH:0.320367
G1 F2400.000
G1 X101.176 Y105.113 E0.01690 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.974 Y104.409 E-0.19332 ; wipe and retract
;WIPE_END
G1 E-2.20668 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X100.253 Y100.278 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.117 Y100.300 E0.00638 ; perimeter
G1 X99.874 Y100.144 E0.01341 ; perimeter
G1 X99.769 Y99.965 E0.00960 ; perimeter
G1 X99.735 Y99.825 E0.00665 ; perimeter
G1 X99.719 Y99.544 E0.01303 ; perimeter
G1 X99.745 Y99.247 E0.01385 ; perimeter
G1 X99.944 Y98.797 E0.02278 ; perimeter
G1 X100.153 Y98.788 E0.00966 ; perimeter
G1 X100.457 Y99.172 E0.02266 ; perimeter
G1 X100.542 Y99.438 E0.01298 ; perimeter
G1 X100.564 Y99.618 E0.00838 ; perimeter
G1 X100.537 Y99.878 E0.01212 ; perimeter
G1 X100.467 Y100.018 E0.00723 ; perimeter
G1 X100.291 Y100.231 E0.01282 ; perimeter
G1 X100.141 Y100.198 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.117 Y100.300 E-0.04943 ; wipe and retract
G1 X99.874 Y100.144 E-0.07641 ; wipe and retract
G1 X99.769 Y99.965 E-0.05468 ; wipe and retract
G1 X99.735 Y99.825 E-0.03787 ; wipe and retract
G1 X99.719 Y99.544 E-0.07426 ; wipe and retract
G1 X99.745 Y99.247 E-0.07892 ; wipe and retract
G1 X99.944 Y98.797 E-0.12979 ; wipe and retract
G1 X100.153 Y98.788 E-0.05504 ; wipe and retract
G1 X100.457 Y99.172 E-0.12909 ; wipe and retract
G1 X100.542 Y99.438 E-0.07394 ; wipe and retract
G1 X100.564 Y99.618 E-0.04777 ; wipe and retract
G1 X100.537 Y99.878 E-0.06902 ; wipe and retract
G1 X100.467 Y100.018 E-0.04119 ; wipe and retract
G1 X100.291 Y100.231 E-0.07303 ; wipe and retract
;WIPE_END
G1 E-1.40955 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X100.232 Y97.914 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.177 Y97.829 E0.00470 ; perimeter
G1 X100.204 Y97.480 E0.01622 ; perimeter
G1 X100.312 Y97.210 E0.01346 ; perimeter
G1 X100.416 Y97.060 E0.00844 ; perimeter
G1 X101.034 Y96.454 E0.04012 ; perimeter
G1 X101.601 Y95.831 E0.03902 ; perimeter
G1 X101.663 Y95.722 E0.00581 ; perimeter
G1 X102.043 Y95.395 E0.02322 ; perimeter
G1 X102.351 Y95.254 E0.01572 ; perimeter
G1 X102.541 Y95.217 E0.00897 ; perimeter
G1 X102.780 Y95.224 E0.01104 ; perimeter
G1 X103.057 Y95.180 E0.01302 ; perimeter
G1 X103.320 Y95.172 E0.01219 ; perimeter
G1 X103.672 Y95.000 E0.01815 ; perimeter
G1 X103.964 Y94.684 E0.01991 ; perimeter
G1 X104.114 Y94.449 E0.01292 ; perimeter
G1 X104.216 Y94.360 E0.00630 ; perimeter
G1 X104.480 Y94.276 E0.01281 ; perimeter
G1 X104.954 Y94.261 E0.02200 ; perimeter
G1 X106.332 Y94.325 E0.06387 ; perimeter
G1 X106.637 Y94.444 E0.01518 ; perimeter
G1 X106.701 Y94.496 E0.00381 ; perimeter
G1 X106.771 Y94.642 E0.00750 ; perimeter
G1 X106.797 Y94.785 E0.00675 ; perimeter
G1 X106.764 Y94.986 E0.00943 ; perimeter
G1 X106.672 Y95.099 E0.00677 ; perimeter
G1 X106.445 Y95.162 E0.01088 ; perimeter
G1 X105.924 Y95.104 E0.02430 ; perimeter
G1 X105.771 Y95.056 E0.00744 ; perimeter
G1 X105.182 Y95.028 E0.02730 ; perimeter
G1 X104.225 Y95.280 E0.04584 ; perimeter
G1 X104.026 Y95.278 E0.00921 ; perimeter
G1 X103.827 Y95.419 E0.01131 ; perimeter
G1 X103.663 Y95.490 E0.00829 ; perimeter
G1 X103.408 Y95.691 E0.01505 ; perimeter
G1 X103.083 Y95.911 E0.01819 ; perimeter
G1 X102.383 Y96.209 E0.03523 ; perimeter
G1 X102.018 Y96.488 E0.02125 ; perimeter
G1 X101.740 Y96.821 E0.02010 ; perimeter
G1 X101.414 Y97.162 E0.02188 ; perimeter
G1 X101.340 Y97.271 E0.00609 ; perimeter
G1 X100.967 Y97.663 E0.02504 ; perimeter
G1 X100.777 Y97.744 E0.00959 ; perimeter
G1 X100.316 Y97.874 E0.02219 ; perimeter
G1 X100.291 Y97.900 E0.00165 ; perimeter
G1 X100.236 Y97.812 F10800.000 ; move inwards before travel
G1 X100.453 Y97.507 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.312744
G1 F2400.000
G1 X100.756 Y97.302 E0.00821 ; infill
G1 X101.769 Y96.206 E0.03348 ; infill
;WIDTH:0.347169
G1 X101.910 Y96.076 E0.00487 ; infill
;WIDTH:0.357362
G1 X102.499 Y95.471 E0.02206 ; infill
G1 X101.989 Y95.989 F10800.000 ; move to first infill point
;WIDTH:0.402267
G1 F2400.000
G1 X102.151 Y95.857 E0.00625 ; infill
;WIDTH:0.410682
G1 X102.188 Y95.830 E0.00140 ; infill
;WIDTH:0.451154
G1 X102.488 Y95.680 E0.01138 ; infill
G1 X103.316 Y95.427 E0.02937 ; infill
G1 X104.874 Y94.505 F10800.000 ; move to first infill point
;WIDTH:0.290078
G1 F2400.000
G1 X104.044 Y95.037 E0.02027 ; infill
G1 X104.121 Y94.869 F10800.000 ; move to first infill point
;WIDTH:0.454536
G1 F2400.000
G1 X104.555 Y94.721 E0.01570 ; infill
G1 X104.755 Y94.694 E0.00689 ; infill
;WIDTH:0.327069
G1 X105.165 Y94.647 E0.00976 ; infill
G1 X105.856 Y94.681 E0.01635 ; infill
;WIDTH:0.364466
G1 X106.005 Y94.709 E0.00403 ; infill
;WIDTH:0.373531
G1 X106.244 Y94.727 E0.00661 ; infill
G1 X106.403 Y94.764 E0.00447 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.244 Y94.727 E-0.04295 ; wipe and retract
G1 X106.005 Y94.709 E-0.06345 ; wipe and retract
;WIPE_END
G1 E-2.29360 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X100.130 Y99.147 ; move to first infill point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.393939
G1 F2400.000
G1 X100.140 Y99.763 E0.01797 ; infill
;WIDTH:0.375138
G1 X100.135 Y99.802 E0.00110 ; infill
;WIDTH:0.348531
G1 X100.091 Y99.990 E0.00491 ; infill
G1 X100.059 Y99.972 F10800.000 ; move to first infill point
;WIDTH:0.321718
G1 F2400.000
G1 X100.116 Y99.327 E0.01500 ; infill
;WIDTH:0.288227
G1 X100.114 Y99.302 E0.00051 ; infill
;WIDTH:0.26042
G1 X100.091 Y99.098 E0.00371 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.114 Y99.302 E-0.05419 ; wipe and retract
;WIPE_END
G1 E-2.34581 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X109.253 Y95.892 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.217 Y95.764 E0.00613 ; perimeter
G1 X109.238 Y95.550 E0.01000 ; perimeter
G1 X109.271 Y95.463 E0.00431 ; perimeter
G1 X109.396 Y95.369 E0.00722 ; perimeter
G1 X109.549 Y95.313 E0.00755 ; perimeter
G1 X109.782 Y95.299 E0.01080 ; perimeter
G1 X110.033 Y95.409 E0.01272 ; perimeter
G1 X110.176 Y95.556 E0.00949 ; perimeter
G1 X110.274 Y95.798 E0.01210 ; perimeter
G1 X110.284 Y95.874 E0.00353 ; perimeter
G1 X110.253 Y95.933 E0.00312 ; perimeter
G1 X110.033 Y96.040 E0.01136 ; perimeter
G1 X109.663 Y96.077 E0.01721 ; perimeter
G1 X109.398 Y96.028 E0.01250 ; perimeter
G1 X109.297 Y95.933 E0.00644 ; perimeter
G1 X109.314 Y95.774 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.217 Y95.764 E-0.04922 ; wipe and retract
G1 X109.238 Y95.550 E-0.05695 ; wipe and retract
G1 X109.271 Y95.463 E-0.02453 ; wipe and retract
G1 X109.396 Y95.369 E-0.04112 ; wipe and retract
G1 X109.549 Y95.313 E-0.04303 ; wipe and retract
G1 X109.782 Y95.299 E-0.06151 ; wipe and retract
G1 X110.033 Y95.409 E-0.07244 ; wipe and retract
G1 X110.176 Y95.556 E-0.05408 ; wipe and retract
G1 X110.274 Y95.798 E-0.06891 ; wipe and retract
G1 X110.284 Y95.874 E-0.02013 ; wipe and retract
G1 X110.253 Y95.933 E-0.01775 ; wipe and retract
G1 X110.033 Y96.040 E-0.06470 ; wipe and retract
G1 X109.663 Y96.077 E-0.09803 ; wipe and retract
G1 X109.398 Y96.028 E-0.07123 ; wipe and retract
G1 X109.297 Y95.933 E-0.03670 ; wipe and retract
;WIPE_END
G1 E-1.61968 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X111.340 Y97.162 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.418 Y97.066 E0.00572 ; perimeter
G1 X111.668 Y97.023 E0.01176 ; perimeter
G1 X111.784 Y97.056 E0.00559 ; perimeter
G1 X111.885 Y97.128 E0.00574 ; perimeter
G1 X111.944 Y97.225 E0.00527 ; perimeter
G1 X112.019 Y97.303 E0.00501 ; perimeter
G1 X112.131 Y97.640 E0.01648 ; perimeter
G1 X112.139 Y97.850 E0.00971 ; perimeter
G1 X112.107 Y98.025 E0.00822 ; perimeter
G1 X112.018 Y98.151 E0.00718 ; perimeter
G1 X111.894 Y98.185 E0.00596 ; perimeter
G1 X111.668 Y98.107 E0.01107 ; perimeter
G1 X111.505 Y97.977 E0.00965 ; perimeter
G1 X111.429 Y97.873 E0.00597 ; perimeter
G1 X111.343 Y97.689 E0.00944 ; perimeter
G1 X111.312 Y97.525 E0.00769 ; perimeter
G1 X111.327 Y97.220 E0.01414 ; perimeter
G1 X111.463 Y97.153 F10800.000 ; move inwards before travel
G1 X111.696 Y97.829 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.274065
G1 F2400.000
G1 X111.778 Y97.747 E0.00223 ; infill
G1 X111.615 Y97.277 E0.00957 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.778 Y97.747 E-0.13140 ; wipe and retract
G1 X111.696 Y97.829 E-0.03058 ; wipe and retract
;WIPE_END
G1 E-2.23801 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X113.709 Y100.906 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.582 Y100.881 E0.00601 ; perimeter
G1 X113.387 Y100.763 E0.01054 ; perimeter
G1 X113.278 Y100.637 E0.00769 ; perimeter
G1 X113.164 Y100.460 E0.00980 ; perimeter
G1 X113.049 Y100.114 E0.01686 ; perimeter
G1 X113.081 Y100.051 E0.00328 ; perimeter
G1 X112.924 Y99.670 E0.01909 ; perimeter
G1 X112.909 Y99.568 E0.00477 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.858 Y99.428 E0.00622 ; perimeter (bridge)
G1 X112.940 Y99.443 E0.00345 ; perimeter (bridge)
G1 X113.027 Y99.507 E0.00452 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.370 Y99.695 E0.01811 ; perimeter
G1 X113.549 Y99.870 E0.01160 ; perimeter
G1 X113.785 Y99.992 E0.01231 ; perimeter
G1 X113.964 Y100.178 E0.01196 ; perimeter
G1 X114.088 Y100.444 E0.01359 ; perimeter
G1 X114.099 Y100.594 E0.00695 ; perimeter
G1 X114.003 Y100.797 E0.01042 ; perimeter
G1 X113.912 Y100.874 E0.00552 ; perimeter
G1 X113.765 Y100.886 E0.00683 ; perimeter
G1 X113.645 Y100.793 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.582 Y100.881 E-0.04835 ; wipe and retract
G1 X113.387 Y100.763 E-0.06007 ; wipe and retract
G1 X113.278 Y100.637 E-0.04381 ; wipe and retract
G1 X113.164 Y100.460 E-0.05581 ; wipe and retract
G1 X113.049 Y100.114 E-0.09604 ; wipe and retract
G1 X113.081 Y100.051 E-0.01866 ; wipe and retract
G1 X112.924 Y99.670 E-0.10873 ; wipe and retract
G1 X112.909 Y99.568 E-0.02719 ; wipe and retract
;WIPE_END
G1 E-1.94134 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X115.373 Y105.776 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.530 Y105.775 E0.00726 ; perimeter
G1 X115.642 Y105.806 E0.00539 ; perimeter
G1 X115.793 Y105.926 E0.00896 ; perimeter
G1 X115.858 Y106.047 E0.00636 ; perimeter
G1 X115.877 Y106.174 E0.00595 ; perimeter
G1 X115.863 Y106.387 E0.00988 ; perimeter
G1 X115.779 Y106.572 E0.00940 ; perimeter
G1 X115.651 Y106.727 E0.00930 ; perimeter
G1 X115.410 Y106.786 E0.01151 ; perimeter
G1 X115.288 Y106.679 E0.00749 ; perimeter
G1 X115.201 Y106.551 E0.00717 ; perimeter
G1 X115.185 Y106.484 E0.00319 ; perimeter
G1 X115.082 Y106.292 E0.01011 ; perimeter
G1 X115.079 Y106.143 E0.00690 ; perimeter
G1 X115.193 Y105.897 E0.01255 ; perimeter
G1 X115.318 Y105.800 E0.00735 ; perimeter
G1 X115.489 Y105.883 F10800.000 ; move inwards before travel
G1 X115.516 Y107.645 ; move to first perimeter point
G1 F1800.000
G1 X115.571 Y107.684 E0.00315 ; perimeter
G1 X115.746 Y108.097 E0.02078 ; perimeter
G1 X115.858 Y108.796 E0.03277 ; perimeter
G1 X115.902 Y110.576 E0.08247 ; perimeter
G1 X115.833 Y110.835 E0.01244 ; perimeter
G1 X115.774 Y110.909 E0.00437 ; perimeter
G1 X115.745 Y110.939 E0.00194 ; perimeter
G1 X115.546 Y111.012 E0.00983 ; perimeter
G1 X115.401 Y110.985 E0.00683 ; perimeter
G1 X115.231 Y110.896 E0.00886 ; perimeter
G1 X115.173 Y110.817 E0.00457 ; perimeter
G1 X115.112 Y110.603 E0.01030 ; perimeter
G1 X115.158 Y109.115 E0.06897 ; perimeter
G1 X115.236 Y108.350 E0.03559 ; perimeter
G1 X115.336 Y107.923 E0.02035 ; perimeter
G1 X115.467 Y107.679 E0.01278 ; perimeter
G1 X115.549 Y107.704 F10800.000 ; move inwards before travel
G1 X115.515 Y108.315 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.116977
G1 F2400.000
G1 X115.512 Y108.394 E0.00049 ; infill
;WIDTH:0.152052
G1 X115.517 Y108.538 E0.00131 ; infill
;WIDTH:0.187126
G1 X115.523 Y108.682 E0.00173 ; infill
;WIDTH:0.2222
G1 X115.528 Y108.826 E0.00215 ; infill
;WIDTH:0.251025
G1 X115.520 Y109.082 E0.00442 ; infill
;WIDTH:0.271036
G1 X115.512 Y109.161 E0.00151 ; infill
;WIDTH:0.309004
G1 X115.510 Y109.845 E0.01514 ; infill
;WIDTH:0.346972
G1 X115.507 Y110.529 E0.01730 ; infill
G1 X115.475 Y110.752 E0.00568 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.507 Y110.529 E-0.05934 ; wipe and retract
G1 X115.510 Y109.845 E-0.18056 ; wipe and retract
;WIPE_END
G1 E-2.16010 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X109.288 Y110.792 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.270 Y110.942 E0.00704 ; perimeter
G1 X109.109 Y110.970 E0.00756 ; perimeter
G1 X108.812 Y110.918 E0.01400 ; perimeter
G1 X108.319 Y110.681 E0.02534 ; perimeter
G1 X107.837 Y110.292 E0.02864 ; perimeter
G1 X107.417 Y110.058 E0.02226 ; perimeter
G1 X107.222 Y110.006 E0.00938 ; perimeter
G1 X106.839 Y109.807 E0.02001 ; perimeter
G1 X106.621 Y109.643 E0.01260 ; perimeter
G1 X106.481 Y109.476 E0.01008 ; perimeter
G1 X106.389 Y109.248 E0.01140 ; perimeter
G1 X106.403 Y109.154 E0.00440 ; perimeter
G1 X106.619 Y109.067 E0.01081 ; perimeter
G1 X106.862 Y109.063 E0.01124 ; perimeter
G1 X107.192 Y109.125 E0.01555 ; perimeter
G1 X107.400 Y109.201 E0.01024 ; perimeter
G1 X107.695 Y109.347 E0.01526 ; perimeter
G1 X107.926 Y109.491 E0.01261 ; perimeter
G1 X108.216 Y109.716 E0.01703 ; perimeter
G1 X108.562 Y109.883 E0.01779 ; perimeter
G1 X108.753 Y110.020 E0.01087 ; perimeter
G1 X109.000 Y110.236 E0.01523 ; perimeter
G1 X109.137 Y110.409 E0.01018 ; perimeter
G1 X109.266 Y110.736 E0.01628 ; perimeter
G1 X109.163 Y110.878 F10800.000 ; move inwards before travel
G1 X108.967 Y110.635 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31216
G1 F2400.000
G1 X108.203 Y110.117 E0.02066 ; infill
;WIDTH:0.293702
G1 X108.044 Y110.016 E0.00394 ; infill
;WIDTH:0.250654
G1 X107.507 Y109.684 E0.01090 ; infill
;WIDTH:0.360213
G1 X107.089 Y109.500 E0.01205 ; infill
;WIDTH:0.335632
G1 X106.704 Y109.367 E0.00991 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.089 Y109.500 E-0.10741 ; wipe and retract
;WIPE_END
G1 E-2.29259 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X110.260 Y111.469 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.295 Y111.452 E0.00181 ; perimeter
G1 X110.690 Y111.463 E0.01827 ; perimeter
G1 X110.854 Y111.493 E0.00775 ; perimeter
G1 X111.124 Y111.602 E0.01347 ; perimeter
G1 X111.566 Y111.881 E0.02423 ; perimeter
G1 X111.915 Y112.207 E0.02213 ; perimeter
G1 X112.174 Y112.491 E0.01779 ; perimeter
G1 X112.251 Y112.654 E0.00836 ; perimeter
G1 X112.254 Y112.771 E0.00538 ; perimeter
G1 X112.226 Y112.977 E0.00963 ; perimeter
G1 X112.144 Y113.098 E0.00677 ; perimeter
G1 X112.022 Y113.190 E0.00707 ; perimeter
G1 X111.876 Y113.232 E0.00703 ; perimeter
G1 X111.732 Y113.231 E0.00670 ; perimeter
G1 X111.634 Y113.199 E0.00479 ; perimeter
G1 X111.496 Y113.087 E0.00819 ; perimeter
G1 X111.345 Y112.892 E0.01143 ; perimeter
G1 X111.308 Y112.769 E0.00596 ; perimeter
G1 X111.157 Y112.596 E0.01061 ; perimeter
G1 X110.480 Y112.099 E0.03891 ; perimeter
G1 X110.326 Y111.910 E0.01132 ; perimeter
G1 X110.228 Y111.734 E0.00931 ; perimeter
G1 X110.201 Y111.584 E0.00707 ; perimeter
G1 X110.233 Y111.522 E0.00323 ; perimeter
G1 X110.298 Y111.479 F10800.000 ; move inwards before travel
G1 X110.508 Y111.741 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291926
G1 F2400.000
G1 X110.753 Y111.846 E0.00552 ; infill
;WIDTH:0.319794
G1 X110.851 Y111.901 E0.00258 ; infill
;WIDTH:0.347661
G1 X110.948 Y111.955 E0.00284 ; infill
;WIDTH:0.362225
G1 X111.231 Y112.143 E0.00902 ; infill
G1 X111.442 Y112.313 E0.00719 ; infill
;WIDTH:0.389957
G1 X111.654 Y112.536 E0.00888 ; infill
;WIDTH:0.407396
G1 X111.946 Y112.945 E0.01523 ; infill
G1 X111.823 Y112.808 F10800.000 ; move to first infill point
;WIDTH:0.436055
G1 F2400.000
G1 X111.811 Y112.779 E0.00102 ; infill
;WIDTH:0.454091
G1 X111.805 Y112.756 E0.00080 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.811 Y112.779 E-0.00614 ; wipe and retract
;WIPE_END
G1 E-2.39386 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 X112.965 Y114.708 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.059 Y114.636 E0.00545 ; perimeter
G1 X113.297 Y114.570 E0.01147 ; perimeter
G1 X113.357 Y114.570 E0.00278 ; perimeter
G1 X113.523 Y114.620 E0.00801 ; perimeter
G1 X113.791 Y114.758 E0.01396 ; perimeter
G1 X113.984 Y115.058 E0.01654 ; perimeter
G1 X113.944 Y115.100 E0.00265 ; perimeter
G1 X113.893 Y115.256 E0.00762 ; perimeter
G1 X113.642 Y115.417 E0.01379 ; perimeter
G1 X113.436 Y115.474 E0.00993 ; perimeter
G1 X113.271 Y115.434 E0.00783 ; perimeter
G1 X113.039 Y115.269 E0.01320 ; perimeter
G1 X112.925 Y115.103 E0.00935 ; perimeter
G1 X112.891 Y114.867 E0.01104 ; perimeter
G1 X112.940 Y114.762 E0.00532 ; perimeter
G1 X113.082 Y114.722 F10800.000 ; move inwards before travel
G1 X114.586 Y115.105 ; move to first perimeter point
G1 F1800.000
G1 X114.764 Y114.998 E0.00962 ; perimeter
G1 X115.010 Y114.749 E0.01621 ; perimeter
G1 X115.175 Y114.662 E0.00866 ; perimeter
G1 X115.261 Y114.641 E0.00412 ; perimeter
G1 X115.452 Y114.649 E0.00884 ; perimeter
G1 X115.556 Y114.696 E0.00528 ; perimeter
G1 X115.617 Y114.754 E0.00392 ; perimeter
G1 X115.702 Y114.892 E0.00747 ; perimeter
G1 X115.732 Y114.996 E0.00504 ; perimeter
G1 X115.717 Y115.118 E0.00570 ; perimeter
G1 X115.635 Y115.311 E0.00968 ; perimeter
G1 X115.523 Y115.445 E0.00808 ; perimeter
G1 X115.450 Y115.497 E0.00420 ; perimeter
G1 X115.291 Y115.555 E0.00783 ; perimeter
G1 X115.132 Y115.547 E0.00737 ; perimeter
G1 X114.996 Y115.491 E0.00678 ; perimeter
G1 X114.891 Y115.403 E0.00638 ; perimeter
G1 X114.674 Y115.137 E0.01589 ; perimeter
G1 X114.642 Y115.125 E0.00157 ; perimeter
G1 X114.793 Y115.084 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:23.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;23.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.764 Y114.998 E-0.04643 ; wipe and retract
G1 X115.010 Y114.749 E-0.09236 ; wipe and retract
G1 X115.175 Y114.662 E-0.04932 ; wipe and retract
G1 X115.261 Y114.641 E-0.02347 ; wipe and retract
G1 X115.452 Y114.649 E-0.05034 ; wipe and retract
G1 X115.556 Y114.696 E-0.03010 ; wipe and retract
G1 X115.617 Y114.754 E-0.02232 ; wipe and retract
G1 X115.702 Y114.892 E-0.04257 ; wipe and retract
G1 X115.732 Y114.996 E-0.02870 ; wipe and retract
G1 X115.717 Y115.118 E-0.03250 ; wipe and retract
G1 X115.635 Y115.311 E-0.05514 ; wipe and retract
G1 X115.523 Y115.445 E-0.04600 ; wipe and retract
G1 X115.450 Y115.497 E-0.02395 ; wipe and retract
G1 X115.291 Y115.555 E-0.04462 ; wipe and retract
G1 X115.132 Y115.547 E-0.04197 ; wipe and retract
G1 X114.996 Y115.491 E-0.03864 ; wipe and retract
G1 X114.891 Y115.403 E-0.03637 ; wipe and retract
G1 X114.674 Y115.137 E-0.09050 ; wipe and retract
G1 X114.642 Y115.125 E-0.00895 ; wipe and retract
;WIPE_END
G1 E-1.59573 F2400.000 ; retract
G1 Z23.075 F10800.000 ; lift Z
G1 Z23.200 ; move to next layer (115)
;AFTER_LAYER_CHANGE
;23.2
G1 Z23.275 ; lift Z
G1 X113.848 Y100.870 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.761 Y100.903 E0.00431 ; perimeter
G1 X113.592 Y100.864 E0.00801 ; perimeter
G1 X113.553 Y100.872 E0.00184 ; perimeter
G1 X113.381 Y100.781 E0.00899 ; perimeter
G1 X113.247 Y100.616 E0.00986 ; perimeter
G1 X113.036 Y100.289 E0.01803 ; perimeter
G1 X112.992 Y100.169 E0.00594 ; perimeter
G1 X112.772 Y99.792 E0.02022 ; perimeter
G1 X112.725 Y99.666 E0.00622 ; perimeter
G1 X112.516 Y99.295 E0.01968 ; perimeter
G1 X112.504 Y99.050 E0.01140 ; perimeter
G1 X112.442 Y98.980 E0.00434 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.266 Y98.785 E0.01097 ; perimeter (bridge)
G1 X112.188 Y98.647 E0.00661 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.864 Y98.389 E0.01923 ; perimeter
G1 X111.809 Y98.309 E0.00450 ; perimeter
G1 X111.567 Y98.136 E0.01376 ; perimeter
G1 X111.423 Y97.933 E0.01153 ; perimeter
G1 X111.346 Y97.738 E0.00972 ; perimeter
G1 X111.345 Y97.529 E0.00968 ; perimeter
G1 X111.380 Y97.486 E0.00256 ; perimeter
G1 X111.451 Y97.241 E0.01182 ; perimeter
G1 X111.499 Y97.195 E0.00309 ; perimeter
G1 X111.662 Y97.160 E0.00773 ; perimeter
G1 X111.817 Y97.176 E0.00719 ; perimeter
G1 X111.926 Y97.253 E0.00620 ; perimeter
G1 X112.039 Y97.376 E0.00771 ; perimeter
G1 X112.212 Y97.840 E0.02296 ; perimeter
G1 X112.219 Y97.930 E0.00419 ; perimeter
G1 X112.176 Y98.177 E0.01161 ; perimeter
G1 X112.317 Y98.407 E0.01247 ; perimeter
G1 X112.343 Y98.549 E0.00668 ; perimeter
G1 X112.371 Y98.583 E0.00205 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.595 Y98.838 E0.01420 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X113.332 Y99.501 E0.04591 ; perimeter
G1 X113.585 Y99.805 E0.01831 ; perimeter
G1 X113.740 Y99.899 E0.00839 ; perimeter
G1 X113.937 Y100.157 E0.01506 ; perimeter
G1 X114.060 Y100.430 E0.01386 ; perimeter
G1 X114.064 Y100.546 E0.00536 ; perimeter
G1 X113.965 Y100.770 E0.01135 ; perimeter
G1 X113.893 Y100.831 E0.00434 ; perimeter
G1 X113.765 Y100.827 F10800.000 ; move inwards before travel
G1 X113.784 Y100.582 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.313237
G1 F2400.000
G1 X113.340 Y100.073 E0.01519 ; infill
;WIDTH:0.280443
G1 X113.314 Y100.027 E0.00104 ; infill
;WIDTH:0.262581
G1 X113.202 Y99.867 E0.00356 ; infill
;WIDTH:0.228427
G1 X113.101 Y99.723 E0.00271 ; infill
;WIDTH:0.199108
G1 X112.923 Y99.503 E0.00368 ; infill
G1 X111.921 Y98.093 F10800.000 ; move to first infill point
;WIDTH:0.205139
G1 F2400.000
G1 X111.681 Y97.407 E0.00981 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.921 Y98.093 E-0.19184 ; wipe and retract
;WIPE_END
G1 E-2.20816 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X110.068 Y95.887 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.931 Y96.005 E0.00838 ; perimeter
G1 X109.639 Y96.051 E0.01370 ; perimeter
G1 X109.569 Y96.086 E0.00364 ; perimeter
G1 X109.314 Y96.039 E0.01202 ; perimeter
G1 X109.174 Y95.913 E0.00872 ; perimeter
G1 X109.143 Y95.807 E0.00509 ; perimeter
G1 X109.185 Y95.510 E0.01394 ; perimeter
G1 X109.334 Y95.377 E0.00927 ; perimeter
G1 X109.494 Y95.339 E0.00762 ; perimeter
G1 X109.791 Y95.347 E0.01373 ; perimeter
G1 X109.956 Y95.431 E0.00860 ; perimeter
G1 X110.058 Y95.549 E0.00722 ; perimeter
G1 X110.108 Y95.670 E0.00607 ; perimeter
G1 X110.073 Y95.828 E0.00748 ; perimeter
G1 X109.887 Y95.880 F10800.000 ; move inwards before travel
G1 X109.523 Y95.705 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.225992
G1 F2400.000
G1 X109.708 Y95.691 E0.00282 ; infill
G1 X109.772 Y95.707 E0.00101 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.708 Y95.691 E-0.01748 ; wipe and retract
G1 X109.523 Y95.705 E-0.04895 ; wipe and retract
;WIPE_END
G1 E-2.33358 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X106.701 Y95.177 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.506 Y95.233 E0.00939 ; perimeter
G1 X106.259 Y95.159 E0.01195 ; perimeter
G1 X106.044 Y95.139 E0.01002 ; perimeter
G1 X105.719 Y95.036 E0.01577 ; perimeter
G1 X105.124 Y95.029 E0.02758 ; perimeter
G1 X104.821 Y95.103 E0.01444 ; perimeter
G1 X104.687 Y95.209 E0.00792 ; perimeter
G1 X104.459 Y95.321 E0.01176 ; perimeter
G1 X104.210 Y95.389 E0.01194 ; perimeter
G1 X103.738 Y95.624 E0.02446 ; perimeter
G1 X103.426 Y95.810 E0.01681 ; perimeter
G1 X103.078 Y95.949 E0.01735 ; perimeter
G1 X102.291 Y96.206 E0.03835 ; perimeter
G1 X101.951 Y96.506 E0.02102 ; perimeter
G1 X101.905 Y96.605 E0.00505 ; perimeter
G1 X101.688 Y96.841 E0.01484 ; perimeter
G1 X101.584 Y97.044 E0.01058 ; perimeter
G1 X101.446 Y97.188 E0.00922 ; perimeter
G1 X101.305 Y97.396 E0.01167 ; perimeter
G1 X101.143 Y97.548 E0.01028 ; perimeter
G1 X100.849 Y97.708 E0.01549 ; perimeter
G1 X100.647 Y97.679 E0.00947 ; perimeter
G1 X100.556 Y97.699 E0.00427 ; perimeter
G1 X100.427 Y97.646 E0.00647 ; perimeter
G1 X100.365 Y97.517 E0.00661 ; perimeter
G1 X100.365 Y97.408 E0.00507 ; perimeter
G1 X100.454 Y97.110 E0.01439 ; perimeter
G1 X100.540 Y96.973 E0.00749 ; perimeter
G1 X101.237 Y96.235 E0.04703 ; perimeter
G1 X101.487 Y95.994 E0.01609 ; perimeter
G1 X101.617 Y95.902 E0.00737 ; perimeter
G1 X102.002 Y95.551 E0.02412 ; perimeter
G1 X102.170 Y95.427 E0.00968 ; perimeter
G1 X102.532 Y95.251 E0.01865 ; perimeter
G1 X102.981 Y95.134 E0.02150 ; perimeter
G1 X103.381 Y95.083 E0.01865 ; perimeter
G1 X103.749 Y94.932 E0.01843 ; perimeter
G1 X104.028 Y94.678 E0.01748 ; perimeter
G1 X104.121 Y94.563 E0.00684 ; perimeter
G1 X104.311 Y94.428 E0.01081 ; perimeter
G1 X104.550 Y94.353 E0.01160 ; perimeter
G1 X105.432 Y94.347 E0.04085 ; perimeter
G1 X106.372 Y94.368 E0.04355 ; perimeter
G1 X106.664 Y94.480 E0.01448 ; perimeter
G1 X106.743 Y94.542 E0.00466 ; perimeter
G1 X106.814 Y94.678 E0.00711 ; perimeter
G1 X106.857 Y94.827 E0.00716 ; perimeter
G1 X106.813 Y95.044 E0.01028 ; perimeter
G1 X106.739 Y95.132 E0.00528 ; perimeter
G1 X106.521 Y95.085 F10800.000 ; move inwards before travel
G1 X106.581 Y94.945 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.323584
G1 F2400.000
G1 X106.446 Y94.811 E0.00445 ; infill
G1 X106.294 Y94.764 E0.00371 ; infill
G1 X105.955 Y94.726 E0.00796 ; infill
;WIDTH:0.294408
G1 X105.789 Y94.698 E0.00354 ; infill
;WIDTH:0.24647
G1 X105.097 Y94.689 E0.01170 ; infill
G1 X104.678 Y94.739 E0.00715 ; infill
;WIDTH:0.365468
G1 X104.613 Y94.755 E0.00179 ; infill
G1 X104.413 Y94.873 E0.00624 ; infill
G1 X103.751 Y95.348 F10800.000 ; move to first infill point
;WIDTH:0.333271
G1 F2400.000
G1 X102.677 Y95.642 E0.02690 ; infill
G1 X102.375 Y95.764 E0.00785 ; infill
G1 X102.087 Y95.913 E0.00784 ; infill
;WIDTH:0.322403
G1 X101.798 Y96.062 E0.00754 ; infill
G1 X102.763 Y95.440 F10800.000 ; move to first infill point
;WIDTH:0.249128
G1 F2400.000
G1 X102.104 Y95.918 E0.01397 ; infill
;WIDTH:0.240087
G1 X101.685 Y96.281 E0.00908 ; infill
G1 X101.370 Y96.641 E0.00784 ; infill
;WIDTH:0.33909
G1 X101.252 Y96.807 E0.00504 ; infill
G1 X100.982 Y97.120 E0.01017 ; infill
G1 X100.612 Y97.424 E0.01181 ; infill
G1 X100.251 Y98.989 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.352 Y99.062 E0.00577 ; perimeter
G1 X100.531 Y99.272 E0.01276 ; perimeter
G1 X100.587 Y99.532 E0.01234 ; perimeter
G1 X100.558 Y99.768 E0.01100 ; perimeter
G1 X100.441 Y99.977 E0.01110 ; perimeter
G1 X100.321 Y100.087 E0.00755 ; perimeter
G1 X100.098 Y100.126 E0.01049 ; perimeter
G1 X99.883 Y99.980 E0.01204 ; perimeter
G1 X99.799 Y99.863 E0.00666 ; perimeter
G1 X99.760 Y99.591 E0.01275 ; perimeter
G1 X99.787 Y99.337 E0.01182 ; perimeter
G1 X99.938 Y99.075 E0.01404 ; perimeter
G1 X100.051 Y99.000 E0.00627 ; perimeter
G1 X100.193 Y99.003 E0.00655 ; perimeter
G1 X100.276 Y99.111 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.352 Y99.062 E-0.04494 ; wipe and retract
G1 X100.531 Y99.272 E-0.07271 ; wipe and retract
G1 X100.587 Y99.532 E-0.07033 ; wipe and retract
G1 X100.558 Y99.768 E-0.06268 ; wipe and retract
G1 X100.441 Y99.977 E-0.06324 ; wipe and retract
G1 X100.321 Y100.087 E-0.04299 ; wipe and retract
G1 X100.098 Y100.126 E-0.05976 ; wipe and retract
G1 X99.883 Y99.980 E-0.06857 ; wipe and retract
G1 X99.799 Y99.863 E-0.03795 ; wipe and retract
G1 X99.760 Y99.591 E-0.07262 ; wipe and retract
G1 X99.787 Y99.337 E-0.06733 ; wipe and retract
G1 X99.938 Y99.075 E-0.07996 ; wipe and retract
G1 X100.051 Y99.000 E-0.03570 ; wipe and retract
G1 X100.193 Y99.003 E-0.03729 ; wipe and retract
;WIPE_END
G1 E-1.58395 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X100.447 Y102.444 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.639 Y102.432 E0.00890 ; perimeter
G1 X100.840 Y102.534 E0.01047 ; perimeter
G1 X100.923 Y102.637 E0.00611 ; perimeter
G1 X100.973 Y102.796 E0.00774 ; perimeter
G1 X100.942 Y103.263 E0.02166 ; perimeter
G1 X100.900 Y103.457 E0.00923 ; perimeter
G1 X101.039 Y103.860 E0.01972 ; perimeter
G1 X101.264 Y104.109 E0.01557 ; perimeter
G1 X101.415 Y104.362 E0.01366 ; perimeter
G1 X101.476 Y104.704 E0.01605 ; perimeter
G1 X101.452 Y104.865 E0.00755 ; perimeter
G1 X101.384 Y104.984 E0.00638 ; perimeter
G1 X101.326 Y105.158 E0.00849 ; perimeter
G1 X101.291 Y105.196 E0.00240 ; perimeter
G1 X101.179 Y105.206 E0.00521 ; perimeter
G1 X100.968 Y105.125 E0.01047 ; perimeter
G1 X100.878 Y105.053 E0.00533 ; perimeter
G1 X100.760 Y104.924 E0.00811 ; perimeter
G1 X100.681 Y104.690 E0.01142 ; perimeter
G1 X100.668 Y104.437 E0.01176 ; perimeter
G1 X100.726 Y104.189 E0.01178 ; perimeter
G1 X100.734 Y103.989 E0.00929 ; perimeter
G1 X100.691 Y103.702 E0.01344 ; perimeter
G1 X100.369 Y103.278 E0.02466 ; perimeter
G1 X100.242 Y103.159 E0.00806 ; perimeter
G1 X100.175 Y102.966 E0.00947 ; perimeter
G1 X100.223 Y102.617 E0.01629 ; perimeter
G1 X100.345 Y102.487 E0.00826 ; perimeter
G1 X100.392 Y102.467 E0.00238 ; perimeter
G1 X100.583 Y102.580 F10800.000 ; move inwards before travel
G1 X100.492 Y102.686 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.240232
G1 F2400.000
G1 X100.694 Y103.268 E0.01011 ; infill
G1 X100.966 Y104.214 F10800.000 ; move to first infill point
;WIDTH:0.314491
G1 F2400.000
G1 X101.151 Y104.921 E0.01649 ; infill
G1 X101.133 Y104.930 F10800.000 ; move to first infill point
;WIDTH:0.143681
G1 F2400.000
G1 X101.115 Y104.870 E0.00053 ; infill
;WIDTH:0.160339
G1 X101.112 Y104.856 E0.00013 ; infill
;WIDTH:0.18907
G1 X101.046 Y104.505 E0.00434 ; infill
;WIDTH:0.217801
G1 X100.980 Y104.154 E0.00520 ; infill
G1 X100.976 Y104.149 F10800.000 ; move to first infill point
;WIDTH:0.114586
G1 F2400.000
G1 X101.189 Y104.841 E0.00431 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.976 Y104.149 E-0.19092 ; wipe and retract
;WIPE_END
G1 E-2.20908 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X102.503 Y106.620 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.558 Y106.491 E0.00650 ; perimeter
G1 X102.851 Y106.325 E0.01558 ; perimeter
G1 X103.046 Y106.329 E0.00904 ; perimeter
G1 X103.297 Y106.407 E0.01219 ; perimeter
G1 X103.488 Y106.536 E0.01067 ; perimeter
G1 X103.611 Y106.731 E0.01066 ; perimeter
G1 X103.610 Y106.893 E0.00752 ; perimeter
G1 X103.545 Y107.056 E0.00813 ; perimeter
G1 X103.487 Y107.109 E0.00364 ; perimeter
G1 X103.209 Y107.196 E0.01346 ; perimeter
G1 X102.997 Y107.194 E0.00984 ; perimeter
G1 X102.807 Y107.103 E0.00974 ; perimeter
G1 X102.636 Y106.966 E0.01015 ; perimeter
G1 X102.524 Y106.791 E0.00960 ; perimeter
G1 X102.511 Y106.680 E0.00521 ; perimeter
G1 X102.634 Y106.568 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.558 Y106.491 E-0.05135 ; wipe and retract
G1 X102.851 Y106.325 E-0.08877 ; wipe and retract
G1 X103.046 Y106.329 E-0.05149 ; wipe and retract
G1 X103.297 Y106.407 E-0.06942 ; wipe and retract
G1 X103.488 Y106.536 E-0.06076 ; wipe and retract
G1 X103.611 Y106.731 E-0.06075 ; wipe and retract
G1 X103.610 Y106.893 E-0.04285 ; wipe and retract
G1 X103.545 Y107.056 E-0.04633 ; wipe and retract
G1 X103.487 Y107.109 E-0.02075 ; wipe and retract
G1 X103.209 Y107.196 E-0.07669 ; wipe and retract
G1 X102.997 Y107.194 E-0.05607 ; wipe and retract
G1 X102.807 Y107.103 E-0.05551 ; wipe and retract
G1 X102.636 Y106.966 E-0.05781 ; wipe and retract
G1 X102.524 Y106.791 E-0.05469 ; wipe and retract
G1 X102.511 Y106.680 E-0.02968 ; wipe and retract
;WIPE_END
G1 E-1.57708 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X106.767 Y109.227 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.947 Y109.185 E0.00855 ; perimeter
G1 X107.609 Y109.292 E0.03108 ; perimeter
G1 X107.805 Y109.371 E0.00981 ; perimeter
G1 X108.323 Y109.694 E0.02826 ; perimeter
G1 X108.796 Y110.087 E0.02850 ; perimeter
G1 X108.851 Y110.212 E0.00632 ; perimeter
G1 X108.955 Y110.340 E0.00763 ; perimeter
G1 X109.020 Y110.503 E0.00814 ; perimeter
G1 X109.010 Y110.717 E0.00993 ; perimeter
G1 X108.916 Y110.773 E0.00507 ; perimeter
G1 X108.690 Y110.762 E0.01046 ; perimeter
G1 X108.464 Y110.705 E0.01080 ; perimeter
G1 X108.073 Y110.501 E0.02043 ; perimeter
G1 X107.921 Y110.379 E0.00905 ; perimeter
G1 X107.080 Y109.915 E0.04449 ; perimeter
G1 X106.983 Y109.841 E0.00564 ; perimeter
G1 X106.743 Y109.588 E0.01615 ; perimeter
G1 X106.663 Y109.382 E0.01026 ; perimeter
G1 X106.666 Y109.333 E0.00227 ; perimeter
G1 X106.725 Y109.271 E0.00396 ; perimeter
G1 X106.923 Y109.326 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.947 Y109.185 E-0.06258 ; wipe and retract
G1 X107.609 Y109.292 E-0.17703 ; wipe and retract
G1 X107.805 Y109.371 E-0.05589 ; wipe and retract
G1 X108.323 Y109.694 E-0.16100 ; wipe and retract
G1 X108.796 Y110.087 E-0.16235 ; wipe and retract
G1 X108.851 Y110.212 E-0.03599 ; wipe and retract
G1 X108.955 Y110.340 E-0.04345 ; wipe and retract
G1 X109.020 Y110.503 E-0.04638 ; wipe and retract
G1 X109.010 Y110.717 E-0.05656 ; wipe and retract
G1 X108.916 Y110.773 E-0.02888 ; wipe and retract
G1 X108.690 Y110.762 E-0.05962 ; wipe and retract
G1 X108.464 Y110.705 E-0.06155 ; wipe and retract
G1 X108.073 Y110.501 E-0.11636 ; wipe and retract
G1 X107.921 Y110.379 E-0.05155 ; wipe and retract
G1 X107.080 Y109.915 E-0.25346 ; wipe and retract
G1 X106.983 Y109.841 E-0.03211 ; wipe and retract
G1 X106.743 Y109.588 E-0.09199 ; wipe and retract
G1 X106.663 Y109.382 E-0.05846 ; wipe and retract
G1 X106.666 Y109.333 E-0.01296 ; wipe and retract
G1 X106.725 Y109.271 E-0.02258 ; wipe and retract
;WIPE_END
G1 E-0.80924 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X108.757 Y110.493 ; move to first infill point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.319511
G1 F2400.000
G1 X108.094 Y110.020 E0.01873 ; infill
G1 X107.617 Y109.740 E0.01270 ; infill
G1 X106.996 Y109.504 E0.01529 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.617 Y109.740 E-0.17542 ; wipe and retract
G1 X108.094 Y110.020 E-0.14572 ; wipe and retract
G1 X108.757 Y110.493 E-0.21496 ; wipe and retract
;WIPE_END
G1 E-1.86389 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X110.513 Y111.645 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.585 Y111.605 E0.00382 ; perimeter
G1 X110.852 Y111.596 E0.01236 ; perimeter
G1 X111.083 Y111.632 E0.01085 ; perimeter
G1 X111.345 Y111.733 E0.01299 ; perimeter
G1 X111.604 Y111.868 E0.01354 ; perimeter
G1 X111.949 Y112.140 E0.02034 ; perimeter
G1 X112.222 Y112.446 E0.01898 ; perimeter
G1 X112.283 Y112.579 E0.00681 ; perimeter
G1 X112.291 Y112.790 E0.00974 ; perimeter
G1 X112.258 Y112.905 E0.00556 ; perimeter
G1 X112.155 Y113.043 E0.00799 ; perimeter
G1 X112.012 Y113.142 E0.00804 ; perimeter
G1 X111.846 Y113.158 E0.00773 ; perimeter
G1 X111.652 Y113.115 E0.00924 ; perimeter
G1 X111.534 Y113.032 E0.00665 ; perimeter
G1 X111.244 Y112.673 E0.02139 ; perimeter
G1 X110.734 Y112.241 E0.03094 ; perimeter
G1 X110.571 Y112.031 E0.01234 ; perimeter
G1 X110.477 Y111.833 E0.01014 ; perimeter
G1 X110.466 Y111.739 E0.00441 ; perimeter
G1 X110.486 Y111.698 E0.00210 ; perimeter
G1 X110.593 Y111.665 F10800.000 ; move inwards before travel
G1 X110.797 Y111.839 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.287399
G1 F2400.000
G1 X111.181 Y112.097 E0.00941 ; infill
;WIDTH:0.384895
G1 X111.568 Y112.381 E0.01367 ; infill
G1 X111.840 Y112.699 E0.01188 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.568 Y112.381 E-0.11023 ; wipe and retract
G1 X111.181 Y112.097 E-0.12686 ; wipe and retract
;WIPE_END
G1 E-2.16291 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X113.241 Y114.621 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.324 Y114.598 E0.00403 ; perimeter
G1 X113.493 Y114.597 E0.00782 ; perimeter
G1 X113.674 Y114.635 E0.00854 ; perimeter
G1 X113.861 Y114.738 E0.00993 ; perimeter
G1 X113.912 Y114.822 E0.00453 ; perimeter
G1 X114.131 Y115.001 E0.01309 ; perimeter
G1 X114.413 Y115.085 E0.01365 ; perimeter
G1 X114.729 Y114.978 E0.01548 ; perimeter
G1 X114.975 Y114.771 E0.01487 ; perimeter
G1 X115.175 Y114.665 E0.01047 ; perimeter
G1 X115.254 Y114.645 E0.00380 ; perimeter
G1 X115.452 Y114.653 E0.00916 ; perimeter
G1 X115.603 Y114.744 E0.00817 ; perimeter
G1 X115.698 Y114.902 E0.00853 ; perimeter
G1 X115.727 Y115.007 E0.00505 ; perimeter
G1 X115.712 Y115.120 E0.00530 ; perimeter
G1 X115.632 Y115.313 E0.00966 ; perimeter
G1 X115.554 Y115.410 E0.00575 ; perimeter
G1 X115.448 Y115.486 E0.00606 ; perimeter
G1 X115.306 Y115.534 E0.00693 ; perimeter
G1 X115.120 Y115.516 E0.00867 ; perimeter
G1 X115.035 Y115.481 E0.00423 ; perimeter
G1 X114.735 Y115.229 E0.01819 ; perimeter
G1 X114.243 Y115.059 E0.02410 ; perimeter
G1 X113.779 Y115.349 E0.02534 ; perimeter
G1 X113.534 Y115.436 E0.01204 ; perimeter
G1 X113.345 Y115.420 E0.00880 ; perimeter
G1 X113.269 Y115.389 E0.00380 ; perimeter
G1 X113.122 Y115.277 E0.00855 ; perimeter
G1 X113.018 Y115.123 E0.00864 ; perimeter
G1 X113.006 Y114.941 E0.00842 ; perimeter
G1 X113.124 Y114.720 E0.01159 ; perimeter
G1 X113.195 Y114.660 E0.00431 ; perimeter
G1 X113.314 Y114.667 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.324 Y114.598 E-0.03792 ; wipe and retract
G1 X113.493 Y114.597 E-0.04453 ; wipe and retract
G1 X113.674 Y114.635 E-0.04867 ; wipe and retract
G1 X113.861 Y114.738 E-0.05656 ; wipe and retract
G1 X113.912 Y114.822 E-0.02583 ; wipe and retract
G1 X114.131 Y115.001 E-0.07457 ; wipe and retract
G1 X114.413 Y115.085 E-0.07774 ; wipe and retract
G1 X114.729 Y114.978 E-0.08817 ; wipe and retract
G1 X114.975 Y114.771 E-0.08473 ; wipe and retract
G1 X115.175 Y114.665 E-0.05967 ; wipe and retract
G1 X115.254 Y114.645 E-0.02166 ; wipe and retract
G1 X115.452 Y114.653 E-0.05220 ; wipe and retract
G1 X115.603 Y114.744 E-0.04656 ; wipe and retract
G1 X115.698 Y114.902 E-0.04859 ; wipe and retract
G1 X115.727 Y115.007 E-0.02878 ; wipe and retract
G1 X115.712 Y115.120 E-0.03022 ; wipe and retract
G1 X115.632 Y115.313 E-0.05505 ; wipe and retract
G1 X115.554 Y115.410 E-0.03278 ; wipe and retract
G1 X115.448 Y115.486 E-0.03455 ; wipe and retract
G1 X115.306 Y115.534 E-0.03948 ; wipe and retract
G1 X115.120 Y115.516 E-0.04940 ; wipe and retract
G1 X115.035 Y115.481 E-0.02408 ; wipe and retract
G1 X114.735 Y115.229 E-0.10363 ; wipe and retract
G1 X114.243 Y115.059 E-0.13727 ; wipe and retract
G1 X113.779 Y115.349 E-0.14438 ; wipe and retract
G1 X113.534 Y115.436 E-0.06859 ; wipe and retract
G1 X113.345 Y115.420 E-0.05014 ; wipe and retract
G1 X113.269 Y115.389 E-0.02163 ; wipe and retract
G1 X113.122 Y115.277 E-0.04872 ; wipe and retract
G1 X113.018 Y115.123 E-0.04923 ; wipe and retract
G1 X113.006 Y114.941 E-0.04799 ; wipe and retract
G1 X113.124 Y114.720 E-0.06603 ; wipe and retract
G1 X113.195 Y114.660 E-0.02453 ; wipe and retract
;WIPE_END
G1 E-0.57614 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X115.157 Y110.759 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.119 Y110.626 E0.00639 ; perimeter
G1 X115.114 Y110.065 E0.02598 ; perimeter
G1 X115.185 Y109.150 E0.04250 ; perimeter
G1 X115.333 Y108.447 E0.03330 ; perimeter
G1 X115.430 Y108.253 E0.01001 ; perimeter
G1 X115.470 Y108.203 E0.00299 ; perimeter
G1 X115.527 Y108.179 E0.00285 ; perimeter
G1 X115.670 Y108.402 E0.01230 ; perimeter
G1 X115.757 Y108.635 E0.01151 ; perimeter
G1 X115.864 Y109.335 E0.03281 ; perimeter
G1 X115.901 Y110.141 E0.03739 ; perimeter
G1 X115.899 Y110.561 E0.01945 ; perimeter
G1 X115.856 Y110.751 E0.00903 ; perimeter
G1 X115.748 Y110.887 E0.00805 ; perimeter
G1 X115.542 Y110.968 E0.01026 ; perimeter
G1 X115.431 Y110.949 E0.00521 ; perimeter
G1 X115.242 Y110.853 E0.00984 ; perimeter
G1 X115.197 Y110.803 E0.00311 ; perimeter
G1 X115.228 Y110.640 F10800.000 ; move inwards before travel
G1 X115.505 Y110.553 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.342235
G1 F2400.000
G1 X115.511 Y109.724 E0.02065 ; infill
;WIDTH:0.300763
G1 X115.517 Y109.369 E0.00760 ; infill
;WIDTH:0.256672
G1 X115.511 Y109.197 E0.00306 ; infill
;WIDTH:0.217413
G1 X115.514 Y109.075 E0.00177 ; infill
;WIDTH:0.177249
G1 X115.518 Y108.954 E0.00136 ; infill
;WIDTH:0.137085
G1 X115.521 Y108.832 E0.00095 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.518 Y108.954 E-0.03210 ; wipe and retract
;WIPE_END
G1 E-2.36790 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 X115.440 Y106.635 ; move to first perimeter point
G1 Z23.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.421 Y106.636 E0.00084 ; perimeter
G1 X115.163 Y106.389 E0.01652 ; perimeter
G1 X115.084 Y106.242 E0.00776 ; perimeter
G1 X115.080 Y106.044 E0.00915 ; perimeter
G1 X115.194 Y105.816 E0.01180 ; perimeter
G1 X115.278 Y105.742 E0.00517 ; perimeter
G1 X115.379 Y105.701 E0.00506 ; perimeter
G1 X115.508 Y105.697 E0.00597 ; perimeter
G1 X115.679 Y105.757 E0.00840 ; perimeter
G1 X115.793 Y105.858 E0.00705 ; perimeter
G1 X115.843 Y105.953 E0.00497 ; perimeter
G1 X115.872 Y106.154 E0.00941 ; perimeter
G1 X115.861 Y106.297 E0.00662 ; perimeter
G1 X115.776 Y106.480 E0.00935 ; perimeter
G1 X115.685 Y106.579 E0.00625 ; perimeter
G1 X115.500 Y106.633 E0.00894 ; perimeter
G1 X115.428 Y106.621 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:23.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;23.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.421 Y106.636 E-0.02061 ; wipe and retract
G1 X115.163 Y106.389 E-0.09413 ; wipe and retract
G1 X115.084 Y106.242 E-0.04423 ; wipe and retract
G1 X115.080 Y106.044 E-0.05213 ; wipe and retract
G1 X115.194 Y105.816 E-0.06725 ; wipe and retract
G1 X115.278 Y105.742 E-0.02943 ; wipe and retract
G1 X115.379 Y105.701 E-0.02882 ; wipe and retract
G1 X115.508 Y105.697 E-0.03402 ; wipe and retract
G1 X115.679 Y105.757 E-0.04787 ; wipe and retract
G1 X115.793 Y105.858 E-0.04018 ; wipe and retract
G1 X115.843 Y105.953 E-0.02831 ; wipe and retract
G1 X115.872 Y106.154 E-0.05359 ; wipe and retract
G1 X115.861 Y106.297 E-0.03771 ; wipe and retract
G1 X115.776 Y106.480 E-0.05324 ; wipe and retract
G1 X115.685 Y106.579 E-0.03558 ; wipe and retract
G1 X115.500 Y106.633 E-0.05094 ; wipe and retract
;WIPE_END
G1 E-1.68196 F2400.000 ; retract
G1 Z23.275 F10800.000 ; lift Z
G1 Z23.400 ; move to next layer (116)
;AFTER_LAYER_CHANGE
;23.4
G1 X115.536 Y106.513 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.395 Y106.500 E0.00657 ; perimeter
G1 X115.199 Y106.371 E0.01084 ; perimeter
G1 X115.085 Y106.184 E0.01015 ; perimeter
G1 X115.079 Y105.957 E0.01051 ; perimeter
G1 X115.196 Y105.734 E0.01166 ; perimeter
G1 X115.270 Y105.671 E0.00450 ; perimeter
G1 X115.381 Y105.628 E0.00550 ; perimeter
G1 X115.514 Y105.624 E0.00617 ; perimeter
G1 X115.685 Y105.687 E0.00848 ; perimeter
G1 X115.795 Y105.792 E0.00702 ; perimeter
G1 X115.848 Y105.906 E0.00582 ; perimeter
G1 X115.858 Y106.207 E0.01397 ; perimeter
G1 X115.777 Y106.381 E0.00891 ; perimeter
G1 X115.719 Y106.433 E0.00358 ; perimeter
G1 X115.591 Y106.489 E0.00649 ; perimeter
G1 X115.452 Y106.399 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.395 Y106.500 E-0.05182 ; wipe and retract
G1 X115.199 Y106.371 E-0.06175 ; wipe and retract
G1 X115.085 Y106.184 E-0.05784 ; wipe and retract
G1 X115.079 Y105.957 E-0.05989 ; wipe and retract
G1 X115.196 Y105.734 E-0.06640 ; wipe and retract
G1 X115.270 Y105.671 E-0.02564 ; wipe and retract
G1 X115.381 Y105.628 E-0.03135 ; wipe and retract
G1 X115.514 Y105.624 E-0.03516 ; wipe and retract
G1 X115.685 Y105.687 E-0.04829 ; wipe and retract
G1 X115.795 Y105.792 E-0.04000 ; wipe and retract
G1 X115.848 Y105.906 E-0.03315 ; wipe and retract
G1 X115.858 Y106.207 E-0.07957 ; wipe and retract
G1 X115.777 Y106.381 E-0.05076 ; wipe and retract
G1 X115.719 Y106.433 E-0.02042 ; wipe and retract
G1 X115.591 Y106.489 E-0.03699 ; wipe and retract
;WIPE_END
G1 E-1.70098 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X115.502 Y108.716 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.636 Y108.822 E0.00789 ; perimeter
G1 X115.748 Y109.101 E0.01393 ; perimeter
G1 X115.846 Y109.632 E0.02503 ; perimeter
G1 X115.871 Y110.091 E0.02127 ; perimeter
G1 X115.897 Y110.196 E0.00502 ; perimeter
G1 X115.895 Y110.554 E0.01657 ; perimeter
G1 X115.864 Y110.746 E0.00902 ; perimeter
G1 X115.747 Y110.915 E0.00952 ; perimeter
G1 X115.552 Y110.970 E0.00942 ; perimeter
G1 X115.389 Y110.953 E0.00757 ; perimeter
G1 X115.262 Y110.876 E0.00690 ; perimeter
G1 X115.146 Y110.720 E0.00903 ; perimeter
G1 X115.128 Y110.656 E0.00306 ; perimeter
G1 X115.128 Y110.159 E0.02301 ; perimeter
G1 X115.193 Y109.571 E0.02743 ; perimeter
G1 X115.359 Y108.894 E0.03230 ; perimeter
G1 X115.460 Y108.755 E0.00794 ; perimeter
G1 X115.581 Y108.867 F10800.000 ; move inwards before travel
G1 X115.503 Y109.327 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.224733
G1 F2400.000
G1 X115.516 Y109.672 E0.00521 ; infill
;WIDTH:0.262806
G1 X115.509 Y109.903 E0.00422 ; infill
;WIDTH:0.284596
G1 X115.509 Y110.560 E0.01321 ; infill
G1 X115.521 Y110.603 E0.00091 ; infill
G1 X115.613 Y110.686 E0.00249 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.521 Y110.603 E-0.03271 ; wipe and retract
G1 X115.509 Y110.560 E-0.01190 ; wipe and retract
G1 X115.509 Y109.903 E-0.17343 ; wipe and retract
;WIPE_END
G1 E-2.18196 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X115.434 Y114.658 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.591 Y114.734 E0.00809 ; perimeter
G1 X115.693 Y114.911 E0.00948 ; perimeter
G1 X115.719 Y115.011 E0.00478 ; perimeter
G1 X115.706 Y115.126 E0.00534 ; perimeter
G1 X115.630 Y115.313 E0.00936 ; perimeter
G1 X115.566 Y115.393 E0.00477 ; perimeter
G1 X115.449 Y115.474 E0.00659 ; perimeter
G1 X115.321 Y115.514 E0.00620 ; perimeter
G1 X115.074 Y115.472 E0.01159 ; perimeter
G1 X114.894 Y115.320 E0.01089 ; perimeter
G1 X114.728 Y115.228 E0.00878 ; perimeter
G1 X114.534 Y115.158 E0.00956 ; perimeter
G1 X114.260 Y115.108 E0.01293 ; perimeter
G1 X113.925 Y115.292 E0.01771 ; perimeter
G1 X113.554 Y115.411 E0.01804 ; perimeter
G1 X113.426 Y115.404 E0.00595 ; perimeter
G1 X113.288 Y115.349 E0.00684 ; perimeter
G1 X113.202 Y115.282 E0.00505 ; perimeter
G1 X113.098 Y115.125 E0.00873 ; perimeter
G1 X113.090 Y114.968 E0.00727 ; perimeter
G1 X113.197 Y114.733 E0.01196 ; perimeter
G1 X113.400 Y114.620 E0.01079 ; perimeter
G1 X113.602 Y114.601 E0.00939 ; perimeter
G1 X113.772 Y114.635 E0.00805 ; perimeter
G1 X114.045 Y114.798 E0.01472 ; perimeter
G1 X114.518 Y114.987 E0.02358 ; perimeter
G1 X114.759 Y114.905 E0.01181 ; perimeter
G1 X114.906 Y114.791 E0.00861 ; perimeter
G1 X115.037 Y114.723 E0.00684 ; perimeter
G1 X115.254 Y114.649 E0.01062 ; perimeter
G1 X115.374 Y114.655 E0.00555 ; perimeter
G1 X115.481 Y114.826 F10800.000 ; move inwards before travel
G1 X113.518 Y115.007 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.352259
G1 F2400.000
G1 X113.511 Y115.013 E0.00025 ; infill
;WIDTH:0.344723
G1 X113.507 Y115.016 E0.00012 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.511 Y115.013 E-0.00125 ; wipe and retract
;WIPE_END
G1 E-2.39875 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X112.225 Y112.982 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.079 Y113.035 E0.00717 ; perimeter
G1 X112.016 Y113.081 E0.00360 ; perimeter
G1 X111.850 Y113.058 E0.00775 ; perimeter
G1 X111.700 Y113.070 E0.00699 ; perimeter
G1 X111.581 Y112.989 E0.00668 ; perimeter
G1 X111.290 Y112.657 E0.02044 ; perimeter
G1 X110.965 Y112.364 E0.02028 ; perimeter
G1 X110.818 Y112.157 E0.01172 ; perimeter
G1 X110.732 Y111.932 E0.01114 ; perimeter
G1 X110.729 Y111.890 E0.00196 ; perimeter
G1 X110.765 Y111.814 E0.00389 ; perimeter
G1 X110.835 Y111.768 E0.00390 ; perimeter
G1 X111.086 Y111.734 E0.01172 ; perimeter
G1 X111.298 Y111.766 E0.00993 ; perimeter
G1 X111.544 Y111.851 E0.01205 ; perimeter
G1 X111.770 Y111.955 E0.01154 ; perimeter
G1 X112.084 Y112.191 E0.01821 ; perimeter
G1 X112.272 Y112.402 E0.01306 ; perimeter
G1 X112.323 Y112.517 E0.00584 ; perimeter
G1 X112.330 Y112.828 E0.01444 ; perimeter
G1 X112.261 Y112.934 E0.00587 ; perimeter
G1 X112.080 Y112.928 F10800.000 ; move inwards before travel
G1 X111.846 Y112.605 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.466211
G1 F2400.000
G1 X111.602 Y112.364 E0.01207 ; infill
;WIDTH:0.416277
G1 X111.551 Y112.321 E0.00206 ; infill
;WIDTH:0.408965
G1 X111.295 Y112.153 E0.00934 ; infill
;WIDTH:0.381001
G1 X111.039 Y111.984 E0.00862 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.295 Y112.153 E-0.08094 ; wipe and retract
;WIPE_END
G1 E-2.31906 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X108.525 Y110.596 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.196 Y110.511 E0.01576 ; perimeter
G1 X107.904 Y110.366 E0.01512 ; perimeter
G1 X107.330 Y110.027 E0.03088 ; perimeter
G1 X107.019 Y109.718 E0.02029 ; perimeter
G1 X106.942 Y109.528 E0.00951 ; perimeter
G1 X106.972 Y109.397 E0.00623 ; perimeter
G1 X107.109 Y109.361 E0.00654 ; perimeter
G1 X107.230 Y109.303 E0.00621 ; perimeter
G1 X107.524 Y109.361 E0.01388 ; perimeter
G1 X107.693 Y109.331 E0.00796 ; perimeter
G1 X107.814 Y109.352 E0.00567 ; perimeter
G1 X107.904 Y109.388 E0.00450 ; perimeter
G1 X108.310 Y109.651 E0.02242 ; perimeter
G1 X108.411 Y109.800 E0.00832 ; perimeter
G1 X108.651 Y109.996 E0.01436 ; perimeter
G1 X108.764 Y110.246 E0.01271 ; perimeter
G1 X108.771 Y110.531 E0.01320 ; perimeter
G1 X108.703 Y110.582 E0.00394 ; perimeter
G1 X108.585 Y110.591 E0.00546 ; perimeter
G1 X108.380 Y110.288 F10800.000 ; move inwards before travel
G1 X108.525 Y110.312 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311097
G1 F2400.000
G1 X108.115 Y110.044 E0.01093 ; infill
G1 X107.597 Y109.593 E0.01532 ; infill
G1 X108.212 Y109.936 F10800.000 ; move to first infill point
;WIDTH:0.302346
G1 F2400.000
G1 X107.541 Y109.726 E0.01517 ; infill
;WIDTH:0.286493
G1 X107.243 Y109.602 E0.00654 ; infill
G1 X107.225 Y109.583 F10800.000 ; move to first infill point
;WIDTH:0.401475
G1 F2400.000
G1 X107.709 Y109.763 E0.01540 ; infill
G1 X108.503 Y110.254 E0.02784 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.709 Y109.763 E-0.24640 ; wipe and retract
G1 X107.225 Y109.583 E-0.13632 ; wipe and retract
;WIPE_END
G1 E-2.01727 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X103.675 Y107.076 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.625 Y107.125 E0.00328 ; perimeter
G1 X103.351 Y107.225 E0.01348 ; perimeter
G1 X103.117 Y107.216 E0.01087 ; perimeter
G1 X102.898 Y107.111 E0.01126 ; perimeter
G1 X102.766 Y107.003 E0.00788 ; perimeter
G1 X102.687 Y106.882 E0.00670 ; perimeter
G1 X102.648 Y106.694 E0.00889 ; perimeter
G1 X102.666 Y106.645 E0.00242 ; perimeter
G1 X102.800 Y106.478 E0.00994 ; perimeter
G1 X102.983 Y106.376 E0.00970 ; perimeter
G1 X103.166 Y106.372 E0.00851 ; perimeter
G1 X103.406 Y106.436 E0.01147 ; perimeter
G1 X103.608 Y106.564 E0.01107 ; perimeter
G1 X103.724 Y106.728 E0.00932 ; perimeter
G1 X103.743 Y106.797 E0.00334 ; perimeter
G1 X103.739 Y106.926 E0.00596 ; perimeter
G1 X103.699 Y107.021 E0.00476 ; perimeter
G1 X103.605 Y107.069 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.625 Y107.125 E-0.03380 ; wipe and retract
G1 X103.351 Y107.225 E-0.07677 ; wipe and retract
G1 X103.117 Y107.216 E-0.06192 ; wipe and retract
G1 X102.898 Y107.111 E-0.06412 ; wipe and retract
G1 X102.766 Y107.003 E-0.04491 ; wipe and retract
G1 X102.687 Y106.882 E-0.03817 ; wipe and retract
G1 X102.648 Y106.694 E-0.05065 ; wipe and retract
G1 X102.666 Y106.645 E-0.01377 ; wipe and retract
G1 X102.800 Y106.478 E-0.05663 ; wipe and retract
G1 X102.983 Y106.376 E-0.05525 ; wipe and retract
G1 X103.166 Y106.372 E-0.04847 ; wipe and retract
G1 X103.406 Y106.436 E-0.06537 ; wipe and retract
G1 X103.608 Y106.564 E-0.06308 ; wipe and retract
G1 X103.724 Y106.728 E-0.05312 ; wipe and retract
G1 X103.743 Y106.797 E-0.01900 ; wipe and retract
G1 X103.739 Y106.926 E-0.03395 ; wipe and retract
G1 X103.699 Y107.021 E-0.02710 ; wipe and retract
;WIPE_END
G1 E-1.59392 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X101.312 Y104.934 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.175 Y105.018 E0.00745 ; perimeter
G1 X101.135 Y105.023 E0.00182 ; perimeter
G1 X100.894 Y104.932 E0.01195 ; perimeter
G1 X100.746 Y104.781 E0.00978 ; perimeter
G1 X100.660 Y104.488 E0.01415 ; perimeter
G1 X100.651 Y104.312 E0.00818 ; perimeter
G1 X100.679 Y104.195 E0.00556 ; perimeter
G1 X100.691 Y103.780 E0.01926 ; perimeter
G1 X100.557 Y103.467 E0.01578 ; perimeter
G1 X100.246 Y103.073 E0.02323 ; perimeter
G1 X100.183 Y102.893 E0.00883 ; perimeter
G1 X100.227 Y102.549 E0.01610 ; perimeter
G1 X100.372 Y102.395 E0.00978 ; perimeter
G1 X100.459 Y102.351 E0.00453 ; perimeter
G1 X100.625 Y102.338 E0.00773 ; perimeter
G1 X100.879 Y102.485 E0.01360 ; perimeter
G1 X100.939 Y102.561 E0.00447 ; perimeter
G1 X100.990 Y102.759 E0.00948 ; perimeter
G1 X100.950 Y103.322 E0.02616 ; perimeter
G1 X101.048 Y103.693 E0.01775 ; perimeter
G1 X101.257 Y103.969 E0.01601 ; perimeter
G1 X101.395 Y104.192 E0.01218 ; perimeter
G1 X101.457 Y104.541 E0.01641 ; perimeter
G1 X101.404 Y104.633 E0.00490 ; perimeter
G1 X101.380 Y104.814 E0.00845 ; perimeter
G1 X101.341 Y104.882 E0.00364 ; perimeter
G1 X101.156 Y104.894 F10800.000 ; move inwards before travel
G1 X101.132 Y104.763 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.256091
G1 F2400.000
G1 X100.965 Y103.983 E0.01413 ; infill
G1 X101.042 Y104.085 F10800.000 ; move to first infill point
;WIDTH:0.318179
G1 F2400.000
G1 X101.047 Y104.732 E0.01481 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.042 Y104.085 E-0.17075 ; wipe and retract
;WIPE_END
G1 E-2.22925 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X100.358 Y100.020 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.081 Y100.024 E0.01281 ; perimeter
G1 X99.897 Y99.888 E0.01061 ; perimeter
G1 X99.847 Y99.830 E0.00355 ; perimeter
G1 X99.804 Y99.617 E0.01007 ; perimeter
G1 X99.836 Y99.362 E0.01191 ; perimeter
G1 X99.960 Y99.140 E0.01175 ; perimeter
G1 X100.080 Y99.054 E0.00685 ; perimeter
G1 X100.375 Y98.967 E0.01428 ; perimeter
G1 X100.480 Y99.052 E0.00628 ; perimeter
G1 X100.595 Y99.262 E0.01109 ; perimeter
G1 X100.629 Y99.414 E0.00721 ; perimeter
G1 X100.605 Y99.686 E0.01262 ; perimeter
G1 X100.450 Y99.940 E0.01380 ; perimeter
G1 X100.403 Y99.981 E0.00288 ; perimeter
G1 X100.151 Y99.837 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.081 Y100.024 E-0.08571 ; wipe and retract
G1 X99.897 Y99.888 E-0.06047 ; wipe and retract
G1 X99.847 Y99.830 E-0.02023 ; wipe and retract
G1 X99.804 Y99.617 E-0.05736 ; wipe and retract
G1 X99.836 Y99.362 E-0.06784 ; wipe and retract
G1 X99.960 Y99.140 E-0.06696 ; wipe and retract
G1 X100.080 Y99.054 E-0.03904 ; wipe and retract
G1 X100.375 Y98.967 E-0.08137 ; wipe and retract
G1 X100.480 Y99.052 E-0.03576 ; wipe and retract
G1 X100.595 Y99.262 E-0.06315 ; wipe and retract
G1 X100.629 Y99.414 E-0.04107 ; wipe and retract
G1 X100.605 Y99.686 E-0.07190 ; wipe and retract
G1 X100.450 Y99.940 E-0.07860 ; wipe and retract
G1 X100.403 Y99.981 E-0.01640 ; wipe and retract
;WIPE_END
G1 E-1.61412 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X100.880 Y97.738 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.775 Y97.717 E0.00496 ; perimeter
G1 X100.598 Y97.599 E0.00983 ; perimeter
G1 X100.520 Y97.322 E0.01335 ; perimeter
G1 X100.560 Y97.052 E0.01261 ; perimeter
G1 X100.659 Y96.893 E0.00869 ; perimeter
G1 X100.810 Y96.728 E0.01039 ; perimeter
G1 X101.251 Y96.316 E0.02792 ; perimeter
G1 X101.731 Y95.974 E0.02733 ; perimeter
G1 X102.110 Y95.630 E0.02371 ; perimeter
G1 X102.376 Y95.433 E0.01532 ; perimeter
G1 X102.884 Y95.157 E0.02676 ; perimeter
G1 X103.450 Y95.008 E0.02711 ; perimeter
G1 X103.834 Y94.868 E0.01895 ; perimeter
G1 X104.314 Y94.508 E0.02778 ; perimeter
G1 X104.518 Y94.450 E0.00981 ; perimeter
G1 X105.075 Y94.442 E0.02583 ; perimeter
G1 X105.340 Y94.499 E0.01257 ; perimeter
G1 X105.906 Y94.415 E0.02647 ; perimeter
G1 X106.442 Y94.426 E0.02483 ; perimeter
G1 X106.692 Y94.516 E0.01231 ; perimeter
G1 X106.792 Y94.594 E0.00591 ; perimeter
G1 X106.894 Y94.749 E0.00858 ; perimeter
G1 X106.938 Y94.887 E0.00669 ; perimeter
G1 X106.886 Y95.135 E0.01172 ; perimeter
G1 X106.812 Y95.232 E0.00570 ; perimeter
G1 X106.631 Y95.289 E0.00877 ; perimeter
G1 X106.538 Y95.296 E0.00434 ; perimeter
G1 X106.233 Y95.203 E0.01474 ; perimeter
G1 X106.146 Y95.133 E0.00519 ; perimeter
G1 X105.543 Y94.848 E0.03091 ; perimeter
G1 X104.968 Y95.024 E0.02784 ; perimeter
G1 X104.895 Y95.112 E0.00529 ; perimeter
G1 X104.621 Y95.293 E0.01522 ; perimeter
G1 X103.683 Y95.749 E0.04832 ; perimeter
G1 X103.308 Y95.879 E0.01837 ; perimeter
G1 X102.830 Y95.989 E0.02274 ; perimeter
G1 X102.398 Y96.121 E0.02090 ; perimeter
G1 X102.272 Y96.118 E0.00587 ; perimeter
G1 X101.859 Y96.464 E0.02494 ; perimeter
G1 X101.727 Y96.748 E0.01449 ; perimeter
G1 X101.677 Y96.803 E0.00342 ; perimeter
G1 X101.440 Y97.270 E0.02427 ; perimeter
G1 X101.298 Y97.475 E0.01158 ; perimeter
G1 X101.222 Y97.546 E0.00479 ; perimeter
G1 X100.932 Y97.709 E0.01542 ; perimeter
G1 X100.821 Y97.649 F10800.000 ; move inwards before travel
G1 X100.786 Y97.376 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.399303
G1 F2400.000
G1 X100.969 Y97.200 E0.00753 ; infill
G1 X101.104 Y97.019 E0.00668 ; infill
;WIDTH:0.301582
G1 X101.326 Y96.723 E0.00796 ; infill
;WIDTH:0.206227
G1 X101.416 Y96.607 E0.00199 ; infill
G1 X101.610 Y96.430 E0.00357 ; infill
G1 X102.245 Y95.876 F10800.000 ; move to first infill point
;WIDTH:0.199056
G1 F2400.000
G1 X102.402 Y95.797 E0.00227 ; infill
;WIDTH:0.237336
G1 X102.558 Y95.719 E0.00283 ; infill
;WIDTH:0.277327
G1 X102.741 Y95.642 E0.00387 ; infill
;WIDTH:0.286634
G1 X103.032 Y95.532 E0.00630 ; infill
G1 X103.533 Y95.389 E0.01056 ; infill
G1 X104.023 Y95.180 E0.01079 ; infill
;WIDTH:0.327975
G1 X104.209 Y95.067 E0.00515 ; infill
;WIDTH:0.371101
G1 X104.497 Y94.878 E0.00941 ; infill
G1 X104.945 Y94.685 E0.01330 ; infill
G1 X105.092 Y94.713 F10800.000 ; move to first infill point
;WIDTH:0.105452
G1 F2400.000
G1 X104.809 Y94.752 E0.00149 ; infill
G1 X104.081 Y94.985 E0.00398 ; infill
G1 X105.873 Y94.664 F10800.000 ; move to first infill point
;WIDTH:0.339323
G1 F2400.000
G1 X106.368 Y94.813 E0.01275 ; infill
;WIDTH:0.355403
G1 X106.497 Y94.868 E0.00364 ; infill
G1 X106.594 Y94.746 E0.00406 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.497 Y94.868 E-0.04128 ; wipe and retract
G1 X106.368 Y94.813 E-0.03695 ; wipe and retract
;WIPE_END
G1 E-2.32177 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X109.108 Y95.532 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.198 Y95.421 E0.00657 ; perimeter
G1 X109.275 Y95.379 E0.00410 ; perimeter
G1 X109.439 Y95.349 E0.00772 ; perimeter
G1 X109.707 Y95.368 E0.01245 ; perimeter
G1 X109.875 Y95.452 E0.00867 ; perimeter
G1 X110.003 Y95.653 E0.01102 ; perimeter
G1 X109.953 Y95.882 E0.01088 ; perimeter
G1 X109.843 Y95.999 E0.00742 ; perimeter
G1 X109.612 Y96.114 E0.01197 ; perimeter
G1 X109.453 Y96.127 E0.00737 ; perimeter
G1 X109.257 Y96.085 E0.00925 ; perimeter
G1 X109.078 Y95.941 E0.01066 ; perimeter
G1 X109.054 Y95.879 E0.00308 ; perimeter
G1 X109.099 Y95.591 E0.01351 ; perimeter
G1 X109.250 Y95.525 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.198 Y95.421 E-0.05176 ; wipe and retract
G1 X109.275 Y95.379 E-0.02339 ; wipe and retract
G1 X109.439 Y95.349 E-0.04398 ; wipe and retract
G1 X109.707 Y95.368 E-0.07093 ; wipe and retract
G1 X109.875 Y95.452 E-0.04937 ; wipe and retract
G1 X110.003 Y95.653 E-0.06277 ; wipe and retract
G1 X109.953 Y95.882 E-0.06197 ; wipe and retract
G1 X109.843 Y95.999 E-0.04230 ; wipe and retract
G1 X109.612 Y96.114 E-0.06820 ; wipe and retract
G1 X109.453 Y96.127 E-0.04199 ; wipe and retract
G1 X109.257 Y96.085 E-0.05272 ; wipe and retract
G1 X109.078 Y95.941 E-0.06074 ; wipe and retract
G1 X109.054 Y95.879 E-0.01754 ; wipe and retract
G1 X109.099 Y95.591 E-0.07696 ; wipe and retract
;WIPE_END
G1 E-1.67539 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 X111.514 Y97.363 ; move to first perimeter point
G1 Z23.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.581 Y97.315 E0.00379 ; perimeter
G1 X111.688 Y97.283 E0.00517 ; perimeter
G1 X111.848 Y97.296 E0.00743 ; perimeter
G1 X112.041 Y97.457 E0.01166 ; perimeter
G1 X112.156 Y97.649 E0.01037 ; perimeter
G1 X112.298 Y98.045 E0.01950 ; perimeter
G1 X112.295 Y98.104 E0.00271 ; perimeter
G1 X112.493 Y98.489 E0.02007 ; perimeter
G1 X113.424 Y99.507 E0.06393 ; perimeter
G1 X113.911 Y100.138 E0.03690 ; perimeter
G1 X114.040 Y100.429 E0.01473 ; perimeter
G1 X114.037 Y100.554 E0.00584 ; perimeter
G1 X113.975 Y100.823 E0.01276 ; perimeter
G1 X113.923 Y100.885 E0.00374 ; perimeter
G1 X113.710 Y100.956 E0.01042 ; perimeter
G1 X113.631 Y100.969 E0.00369 ; perimeter
G1 X113.563 Y100.948 E0.00331 ; perimeter
G1 X113.402 Y100.834 E0.00915 ; perimeter
G1 X113.213 Y100.591 E0.01425 ; perimeter
G1 X112.763 Y99.926 E0.03720 ; perimeter
G1 X111.995 Y98.709 E0.06668 ; perimeter
G1 X111.940 Y98.665 E0.00323 ; perimeter
G1 X111.712 Y98.332 E0.01869 ; perimeter
G1 X111.553 Y98.220 E0.00900 ; perimeter
G1 X111.408 Y98.004 E0.01202 ; perimeter
G1 X111.344 Y97.747 E0.01228 ; perimeter
G1 X111.369 Y97.577 E0.00798 ; perimeter
G1 X111.498 Y97.420 E0.00938 ; perimeter
G1 X111.594 Y97.383 F10800.000 ; move inwards before travel
G1 X111.639 Y97.627 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.182167
G1 F2400.000
G1 X111.957 Y98.095 E0.00655 ; infill
G1 X111.989 Y98.187 E0.00113 ; infill
G1 X112.155 Y98.465 E0.00375 ; infill
G1 X112.128 Y98.507 F10800.000 ; move to first infill point
;WIDTH:0.379735
G1 F2400.000
G1 X111.749 Y97.737 E0.02402 ; infill
;WIDTH:0.350923
G1 X111.671 Y97.720 E0.00203 ; infill
;WIDTH:0.318292
G1 X111.594 Y97.703 E0.00181 ; infill
G1 X112.198 Y98.519 F10800.000 ; move to first infill point
;WIDTH:0.0974628
G1 F2400.000
G1 X112.273 Y98.646 E0.00067 ; infill
;WIDTH:0.145216
G1 X112.436 Y98.860 E0.00228 ; infill
;WIDTH:0.192969
G1 X112.599 Y99.073 E0.00335 ; infill
;WIDTH:0.240721
G1 X112.762 Y99.287 E0.00442 ; infill
;WIDTH:0.288474
G1 X112.925 Y99.500 E0.00548 ; infill
;WIDTH:0.336226
G1 X113.088 Y99.714 E0.00655 ; infill
;WIDTH:0.346864
G1 X113.552 Y100.351 E0.01994 ; infill
G1 X113.645 Y100.506 E0.00455 ; infill
G1 X113.797 Y100.492 E0.00388 ; infill
G1 X113.707 Y100.694 F10800.000 ; move to first infill point
;WIDTH:0.293746
G1 F2400.000
G1 X113.384 Y99.849 E0.01886 ; infill
;LAYER_CHANGE
;Z:23.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;23.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.707 Y100.694 E-0.23860 ; wipe and retract
;WIPE_END
G1 E-2.16140 F2400.000 ; retract
G1 Z23.475 F10800.000 ; lift Z
G1 Z23.600 ; move to next layer (117)
;AFTER_LAYER_CHANGE
;23.6
G1 Z23.675 ; lift Z
G1 X101.440 Y104.393 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.415 Y104.497 E0.00495 ; perimeter
G1 X101.324 Y104.653 E0.00839 ; perimeter
G1 X101.309 Y104.761 E0.00505 ; perimeter
G1 X101.189 Y104.852 E0.00695 ; perimeter
G1 X101.109 Y104.868 E0.00381 ; perimeter
G1 X100.866 Y104.790 E0.01179 ; perimeter
G1 X100.728 Y104.641 E0.00939 ; perimeter
G1 X100.662 Y104.438 E0.00992 ; perimeter
G1 X100.632 Y104.136 E0.01403 ; perimeter
G1 X100.636 Y103.696 E0.02038 ; perimeter
G1 X100.465 Y103.306 E0.01973 ; perimeter
G1 X100.260 Y103.024 E0.01612 ; perimeter
G1 X100.188 Y102.830 E0.00960 ; perimeter
G1 X100.178 Y102.712 E0.00547 ; perimeter
G1 X100.198 Y102.558 E0.00719 ; perimeter
G1 X100.238 Y102.443 E0.00564 ; perimeter
G1 X100.342 Y102.335 E0.00697 ; perimeter
G1 X100.481 Y102.252 E0.00748 ; perimeter
G1 X100.680 Y102.220 E0.00937 ; perimeter
G1 X100.875 Y102.371 E0.01141 ; perimeter
G1 X100.955 Y102.482 E0.00634 ; perimeter
G1 X101.009 Y102.729 E0.01173 ; perimeter
G1 X100.992 Y103.173 E0.02058 ; perimeter
G1 X101.050 Y103.496 E0.01520 ; perimeter
G1 X101.375 Y104.020 E0.02854 ; perimeter
G1 X101.430 Y104.334 E0.01478 ; perimeter
G1 X101.346 Y104.445 F10800.000 ; move inwards before travel
G1 X101.094 Y104.568 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.33287
G1 F2400.000
G1 X101.015 Y104.157 E0.01008 ; infill
;WIDTH:0.317858
G1 X100.876 Y103.750 E0.00983 ; infill
G1 X100.965 Y103.816 F10800.000 ; move to first infill point
;WIDTH:0.253261
G1 F2400.000
G1 X101.036 Y104.481 E0.01169 ; infill
G1 X100.741 Y103.278 F10800.000 ; move to first infill point
;WIDTH:0.11324
G1 F2400.000
G1 X100.715 Y103.189 E0.00054 ; infill
;WIDTH:0.126871
G1 X100.545 Y102.494 E0.00499 ; infill
G1 X100.588 Y102.646 F10800.000 ; move to first infill point
;WIDTH:0.355097
G1 F2400.000
G1 X100.586 Y102.654 E0.00022 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.588 Y102.646 E-0.00227 ; wipe and retract
;WIPE_END
G1 E-2.39773 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X103.808 Y107.104 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.751 Y107.156 E0.00359 ; perimeter
G1 X103.521 Y107.251 E0.01149 ; perimeter
G1 X103.388 Y107.260 E0.00621 ; perimeter
G1 X103.233 Y107.236 E0.00727 ; perimeter
G1 X103.004 Y107.130 E0.01168 ; perimeter
G1 X102.896 Y107.039 E0.00656 ; perimeter
G1 X102.844 Y106.963 E0.00422 ; perimeter
G1 X102.788 Y106.765 E0.00953 ; perimeter
G1 X102.828 Y106.625 E0.00677 ; perimeter
G1 X102.927 Y106.509 E0.00704 ; perimeter
G1 X103.105 Y106.427 E0.00909 ; perimeter
G1 X103.288 Y106.415 E0.00850 ; perimeter
G1 X103.515 Y106.464 E0.01074 ; perimeter
G1 X103.727 Y106.591 E0.01147 ; perimeter
G1 X103.842 Y106.743 E0.00880 ; perimeter
G1 X103.871 Y106.844 E0.00487 ; perimeter
G1 X103.868 Y106.952 E0.00501 ; perimeter
G1 X103.830 Y107.048 E0.00479 ; perimeter
G1 X103.731 Y107.095 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.751 Y107.156 E-0.03537 ; wipe and retract
G1 X103.521 Y107.251 E-0.06548 ; wipe and retract
G1 X103.388 Y107.260 E-0.03537 ; wipe and retract
G1 X103.233 Y107.236 E-0.04139 ; wipe and retract
G1 X103.004 Y107.130 E-0.06655 ; wipe and retract
G1 X102.896 Y107.039 E-0.03739 ; wipe and retract
G1 X102.844 Y106.963 E-0.02402 ; wipe and retract
G1 X102.788 Y106.765 E-0.05427 ; wipe and retract
G1 X102.828 Y106.625 E-0.03855 ; wipe and retract
G1 X102.927 Y106.509 E-0.04012 ; wipe and retract
G1 X103.105 Y106.427 E-0.05179 ; wipe and retract
G1 X103.288 Y106.415 E-0.04844 ; wipe and retract
G1 X103.515 Y106.464 E-0.06118 ; wipe and retract
G1 X103.727 Y106.591 E-0.06532 ; wipe and retract
G1 X103.842 Y106.743 E-0.05015 ; wipe and retract
G1 X103.871 Y106.844 E-0.02773 ; wipe and retract
G1 X103.868 Y106.952 E-0.02853 ; wipe and retract
G1 X103.830 Y107.048 E-0.02727 ; wipe and retract
;WIPE_END
G1 E-1.60106 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X108.585 Y110.323 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.510 Y110.409 E0.00528 ; perimeter
G1 X108.352 Y110.446 E0.00754 ; perimeter
G1 X108.063 Y110.389 E0.01362 ; perimeter
G1 X107.842 Y110.291 E0.01122 ; perimeter
G1 X107.397 Y110.014 E0.02427 ; perimeter
G1 X107.262 Y109.872 E0.00911 ; perimeter
G1 X107.217 Y109.806 E0.00369 ; perimeter
G1 X107.214 Y109.717 E0.00413 ; perimeter
G1 X107.162 Y109.583 E0.00665 ; perimeter
G1 X107.197 Y109.509 E0.00379 ; perimeter
G1 X107.445 Y109.394 E0.01263 ; perimeter
G1 X107.699 Y109.356 E0.01191 ; perimeter
G1 X107.988 Y109.406 E0.01358 ; perimeter
G1 X108.311 Y109.616 E0.01788 ; perimeter
G1 X108.484 Y109.868 E0.01413 ; perimeter
G1 X108.588 Y110.172 E0.01488 ; perimeter
G1 X108.586 Y110.263 E0.00424 ; perimeter
G1 X108.472 Y110.337 F10800.000 ; move inwards before travel
G1 X108.335 Y110.177 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23821
G1 F2400.000
G1 X108.158 Y110.032 E0.00372 ; infill
G1 X107.470 Y109.648 E0.01279 ; infill
G1 X107.456 Y109.655 F10800.000 ; move to first infill point
;WIDTH:0.359397
G1 F2400.000
G1 X107.645 Y109.727 E0.00532 ; infill
;WIDTH:0.383291
G1 X107.833 Y109.799 E0.00572 ; infill
G1 X108.018 Y109.917 E0.00621 ; infill
G1 X108.297 Y110.183 E0.01091 ; infill
G1 X108.159 Y109.820 F10800.000 ; move to first infill point
;WIDTH:0.195147
G1 F2400.000
G1 X107.455 Y109.685 E0.00907 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.159 Y109.820 E-0.18912 ; wipe and retract
;WIPE_END
G1 E-2.21088 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X111.000 Y111.996 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.083 Y111.928 E0.00497 ; perimeter
G1 X111.382 Y111.876 E0.01407 ; perimeter
G1 X111.728 Y111.960 E0.01647 ; perimeter
G1 X111.937 Y112.047 E0.01050 ; perimeter
G1 X112.328 Y112.366 E0.02338 ; perimeter
G1 X112.416 Y112.532 E0.00868 ; perimeter
G1 X112.376 Y112.820 E0.01347 ; perimeter
G1 X112.269 Y112.956 E0.00803 ; perimeter
G1 X112.061 Y113.039 E0.01039 ; perimeter
G1 X111.830 Y113.053 E0.01068 ; perimeter
G1 X111.730 Y113.014 E0.00498 ; perimeter
G1 X111.632 Y112.948 E0.00548 ; perimeter
G1 X111.322 Y112.599 E0.02160 ; perimeter
G1 X111.192 Y112.482 E0.00815 ; perimeter
G1 X111.059 Y112.279 E0.01120 ; perimeter
G1 X110.995 Y112.052 E0.01092 ; perimeter
G1 X111.107 Y111.990 F10800.000 ; move inwards before travel
G1 X112.148 Y112.710 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.339851
G1 F2400.000
G1 X111.600 Y112.328 E0.01648 ; infill
G1 X111.269 Y112.136 E0.00944 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.600 Y112.328 E-0.10092 ; wipe and retract
G1 X112.148 Y112.710 E-0.17619 ; wipe and retract
;WIPE_END
G1 E-2.12289 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X114.289 Y115.141 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.055 Y115.270 E0.01237 ; perimeter
G1 X113.691 Y115.385 E0.01765 ; perimeter
G1 X113.499 Y115.385 E0.00892 ; perimeter
G1 X113.365 Y115.336 E0.00661 ; perimeter
G1 X113.275 Y115.277 E0.00499 ; perimeter
G1 X113.178 Y115.115 E0.00875 ; perimeter
G1 X113.174 Y114.974 E0.00652 ; perimeter
G1 X113.255 Y114.751 E0.01099 ; perimeter
G1 X113.284 Y114.718 E0.00205 ; perimeter
G1 X113.458 Y114.618 E0.00928 ; perimeter
G1 X113.669 Y114.587 E0.00987 ; perimeter
G1 X113.886 Y114.639 E0.01034 ; perimeter
G1 X114.144 Y114.772 E0.01345 ; perimeter
G1 X114.665 Y114.877 E0.02460 ; perimeter
G1 X115.251 Y114.654 E0.02905 ; perimeter
G1 X115.447 Y114.662 E0.00912 ; perimeter
G1 X115.582 Y114.728 E0.00694 ; perimeter
G1 X115.691 Y114.911 E0.00988 ; perimeter
G1 X115.712 Y115.015 E0.00493 ; perimeter
G1 X115.705 Y115.130 E0.00532 ; perimeter
G1 X115.631 Y115.309 E0.00897 ; perimeter
G1 X115.567 Y115.386 E0.00467 ; perimeter
G1 X115.453 Y115.461 E0.00630 ; perimeter
G1 X115.322 Y115.496 E0.00628 ; perimeter
G1 X115.118 Y115.459 E0.00958 ; perimeter
G1 X114.775 Y115.250 E0.01860 ; perimeter
G1 X114.628 Y115.195 E0.00727 ; perimeter
G1 X114.348 Y115.151 E0.01314 ; perimeter
G1 X114.100 Y114.953 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.055 Y115.270 E-0.08356 ; wipe and retract
G1 X113.691 Y115.385 E-0.10057 ; wipe and retract
G1 X113.499 Y115.385 E-0.05079 ; wipe and retract
G1 X113.365 Y115.336 E-0.03766 ; wipe and retract
G1 X113.275 Y115.277 E-0.02840 ; wipe and retract
G1 X113.178 Y115.115 E-0.04982 ; wipe and retract
G1 X113.174 Y114.974 E-0.03716 ; wipe and retract
G1 X113.255 Y114.751 E-0.06263 ; wipe and retract
G1 X113.284 Y114.718 E-0.01167 ; wipe and retract
G1 X113.458 Y114.618 E-0.05285 ; wipe and retract
G1 X113.669 Y114.587 E-0.05623 ; wipe and retract
G1 X113.886 Y114.639 E-0.05889 ; wipe and retract
G1 X114.144 Y114.772 E-0.07660 ; wipe and retract
G1 X114.665 Y114.877 E-0.14017 ; wipe and retract
G1 X115.251 Y114.654 E-0.16547 ; wipe and retract
G1 X115.447 Y114.662 E-0.05196 ; wipe and retract
G1 X115.582 Y114.728 E-0.03955 ; wipe and retract
G1 X115.691 Y114.911 E-0.05628 ; wipe and retract
G1 X115.712 Y115.015 E-0.02807 ; wipe and retract
G1 X115.705 Y115.130 E-0.03028 ; wipe and retract
G1 X115.631 Y115.309 E-0.05108 ; wipe and retract
G1 X115.567 Y115.386 E-0.02660 ; wipe and retract
G1 X115.453 Y115.461 E-0.03589 ; wipe and retract
G1 X115.322 Y115.496 E-0.03580 ; wipe and retract
G1 X115.118 Y115.459 E-0.05457 ; wipe and retract
G1 X114.775 Y115.250 E-0.10594 ; wipe and retract
G1 X114.628 Y115.195 E-0.04144 ; wipe and retract
G1 X114.348 Y115.151 E-0.07484 ; wipe and retract
;WIPE_END
G1 E-0.75521 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X115.354 Y110.979 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.247 Y110.917 E0.00573 ; perimeter
G1 X115.198 Y110.751 E0.00799 ; perimeter
G1 X115.138 Y110.679 E0.00434 ; perimeter
G1 X115.144 Y110.277 E0.01867 ; perimeter
G1 X115.216 Y109.875 E0.01890 ; perimeter
G1 X115.353 Y109.400 E0.02288 ; perimeter
G1 X115.457 Y109.250 E0.00848 ; perimeter
G1 X115.558 Y109.227 E0.00478 ; perimeter
G1 X115.611 Y109.277 E0.00338 ; perimeter
G1 X115.742 Y109.560 E0.01443 ; perimeter
G1 X115.809 Y109.848 E0.01372 ; perimeter
G1 X115.819 Y110.074 E0.01046 ; perimeter
G1 X115.892 Y110.372 E0.01422 ; perimeter
G1 X115.892 Y110.545 E0.00802 ; perimeter
G1 X115.863 Y110.789 E0.01138 ; perimeter
G1 X115.788 Y110.903 E0.00630 ; perimeter
G1 X115.694 Y110.971 E0.00540 ; perimeter
G1 X115.523 Y111.023 E0.00829 ; perimeter
G1 X115.412 Y110.994 E0.00531 ; perimeter
G1 X115.332 Y110.858 F10800.000 ; move inwards before travel
G1 X115.488 Y110.765 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.207337
G1 F2400.000
G1 X115.511 Y109.944 E0.01124 ; infill
;WIDTH:0.165116
G1 X115.533 Y109.762 E0.00186 ; infill
G1 X115.459 Y109.903 F10800.000 ; move to first infill point
;WIDTH:0.27091
G1 F2400.000
G1 X115.531 Y110.660 E0.01441 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.459 Y109.903 E-0.20057 ; wipe and retract
;WIPE_END
G1 E-2.19943 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X115.492 Y106.434 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.398 Y106.426 E0.00438 ; perimeter
G1 X115.240 Y106.342 E0.00830 ; perimeter
G1 X115.135 Y106.216 E0.00758 ; perimeter
G1 X115.078 Y106.100 E0.00597 ; perimeter
G1 X115.077 Y105.873 E0.01051 ; perimeter
G1 X115.198 Y105.653 E0.01165 ; perimeter
G1 X115.263 Y105.599 E0.00393 ; perimeter
G1 X115.383 Y105.552 E0.00598 ; perimeter
G1 X115.518 Y105.550 E0.00622 ; perimeter
G1 X115.665 Y105.602 E0.00723 ; perimeter
G1 X115.791 Y105.722 E0.00805 ; perimeter
G1 X115.846 Y105.854 E0.00661 ; perimeter
G1 X115.850 Y106.130 E0.01281 ; perimeter
G1 X115.768 Y106.302 E0.00880 ; perimeter
G1 X115.714 Y106.354 E0.00349 ; perimeter
G1 X115.548 Y106.414 E0.00816 ; perimeter
G1 X115.438 Y106.357 F10800.000 ; move inwards before travel
G1 X115.471 Y105.936 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.330922
G1 F2400.000
G1 X115.463 Y106.009 E0.00175 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.471 Y105.936 E-0.01923 ; wipe and retract
;WIPE_END
G1 E-2.38077 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X113.760 Y101.065 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.534 Y100.998 E0.01088 ; perimeter
G1 X113.431 Y100.932 E0.00570 ; perimeter
G1 X113.128 Y100.485 E0.02500 ; perimeter
G1 X112.972 Y100.200 E0.01505 ; perimeter
G1 X112.632 Y99.728 E0.02693 ; perimeter
G1 X112.101 Y99.046 E0.04005 ; perimeter
G1 X111.613 Y98.355 E0.03917 ; perimeter
G1 X111.531 Y98.297 E0.00465 ; perimeter
G1 X111.363 Y98.071 E0.01306 ; perimeter
G1 X111.347 Y97.881 E0.00880 ; perimeter
G1 X111.397 Y97.616 E0.01249 ; perimeter
G1 X111.474 Y97.514 E0.00594 ; perimeter
G1 X111.516 Y97.507 E0.00195 ; perimeter
G1 X111.668 Y97.395 E0.00874 ; perimeter
G1 X111.874 Y97.415 E0.00957 ; perimeter
G1 X112.057 Y97.557 E0.01072 ; perimeter
G1 X112.222 Y97.796 E0.01348 ; perimeter
G1 X112.291 Y97.965 E0.00843 ; perimeter
G1 X112.594 Y98.460 E0.02690 ; perimeter
G1 X112.965 Y98.913 E0.02712 ; perimeter
G1 X113.046 Y99.049 E0.00732 ; perimeter
G1 X113.693 Y99.869 E0.04837 ; perimeter
G1 X113.917 Y100.190 E0.01815 ; perimeter
G1 X114.030 Y100.450 E0.01314 ; perimeter
G1 X114.054 Y100.748 E0.01386 ; perimeter
G1 X114.041 Y100.805 E0.00272 ; perimeter
G1 X113.946 Y100.972 E0.00888 ; perimeter
G1 X113.819 Y101.062 E0.00723 ; perimeter
G1 X113.631 Y100.868 F10800.000 ; move inwards before travel
G1 X113.775 Y100.786 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.379423
G1 F2400.000
G1 X113.558 Y100.390 E0.01262 ; infill
G1 X113.373 Y100.106 E0.00949 ; infill
;WIDTH:0.356324
G1 X113.304 Y100.001 E0.00327 ; infill
;WIDTH:0.335347
G1 X112.932 Y99.507 E0.01505 ; infill
;WIDTH:0.306942
G1 X112.287 Y98.667 E0.02324 ; infill
G1 X111.655 Y97.704 E0.02530 ; infill
G1 X112.021 Y98.515 F10800.000 ; move to first infill point
;WIDTH:0.360591
G1 F2400.000
G1 X111.700 Y97.670 E0.02386 ; infill
G1 X111.695 Y97.674 F10800.000 ; move to first infill point
;WIDTH:0.415941
G1 F2400.000
G1 X111.781 Y97.913 E0.00786 ; infill
G1 X111.834 Y97.987 E0.00285 ; infill
G1 X112.329 Y98.489 E0.02186 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.834 Y97.987 E-0.18600 ; wipe and retract
G1 X111.781 Y97.913 E-0.02425 ; wipe and retract
G1 X111.695 Y97.674 E-0.06686 ; wipe and retract
;WIPE_END
G1 E-2.12289 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X109.682 Y96.118 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.625 Y96.169 E0.00356 ; perimeter
G1 X109.269 Y96.177 E0.01646 ; perimeter
G1 X109.069 Y96.063 E0.01069 ; perimeter
G1 X108.962 Y95.966 E0.00670 ; perimeter
G1 X108.881 Y95.841 E0.00686 ; perimeter
G1 X108.886 Y95.651 E0.00882 ; perimeter
G1 X109.026 Y95.473 E0.01051 ; perimeter
G1 X109.230 Y95.378 E0.01044 ; perimeter
G1 X109.383 Y95.358 E0.00712 ; perimeter
G1 X109.661 Y95.389 E0.01295 ; perimeter
G1 X109.808 Y95.483 E0.00807 ; perimeter
G1 X109.895 Y95.650 E0.00873 ; perimeter
G1 X109.896 Y95.849 E0.00922 ; perimeter
G1 X109.860 Y95.886 E0.00239 ; perimeter
G1 X109.792 Y96.060 E0.00863 ; perimeter
G1 X109.735 Y96.090 E0.00300 ; perimeter
G1 X109.607 Y96.098 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.625 Y96.169 E-0.03584 ; wipe and retract
G1 X109.269 Y96.177 E-0.09377 ; wipe and retract
G1 X109.069 Y96.063 E-0.06090 ; wipe and retract
G1 X108.962 Y95.966 E-0.03817 ; wipe and retract
G1 X108.881 Y95.841 E-0.03906 ; wipe and retract
G1 X108.886 Y95.651 E-0.05026 ; wipe and retract
G1 X109.026 Y95.473 E-0.05988 ; wipe and retract
G1 X109.230 Y95.378 E-0.05948 ; wipe and retract
G1 X109.383 Y95.358 E-0.04056 ; wipe and retract
G1 X109.661 Y95.389 E-0.07376 ; wipe and retract
G1 X109.808 Y95.483 E-0.04595 ; wipe and retract
G1 X109.895 Y95.650 E-0.04974 ; wipe and retract
G1 X109.896 Y95.849 E-0.05252 ; wipe and retract
G1 X109.860 Y95.886 E-0.01362 ; wipe and retract
G1 X109.792 Y96.060 E-0.04914 ; wipe and retract
G1 X109.735 Y96.090 E-0.01710 ; wipe and retract
;WIPE_END
G1 E-1.62024 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X100.603 Y99.055 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.699 Y99.240 E0.00962 ; perimeter
G1 X100.667 Y99.590 E0.01630 ; perimeter
G1 X100.546 Y99.844 E0.01302 ; perimeter
G1 X100.521 Y99.882 E0.00214 ; perimeter
G1 X100.389 Y99.969 E0.00731 ; perimeter
G1 X100.250 Y99.991 E0.00655 ; perimeter
G1 X100.090 Y99.944 E0.00770 ; perimeter
G1 X99.885 Y99.778 E0.01224 ; perimeter
G1 X99.841 Y99.589 E0.00897 ; perimeter
G1 X99.890 Y99.297 E0.01370 ; perimeter
G1 X99.994 Y99.132 E0.00903 ; perimeter
G1 X100.221 Y98.907 E0.01482 ; perimeter
G1 X100.317 Y98.855 E0.00505 ; perimeter
G1 X100.488 Y98.836 E0.00796 ; perimeter
G1 X100.614 Y98.705 E0.00843 ; perimeter
G1 X100.627 Y98.760 E0.00261 ; perimeter
G1 X100.608 Y98.995 E0.01095 ; perimeter
G1 X100.463 Y99.209 F10800.000 ; move inwards before travel
G1 X100.882 Y97.847 ; move to first perimeter point
G1 F1800.000
G1 X100.819 Y97.950 E0.00557 ; perimeter
G1 X100.787 Y97.810 E0.00664 ; perimeter
G1 X100.709 Y97.746 E0.00467 ; perimeter
G1 X100.673 Y97.570 E0.00832 ; perimeter
G1 X100.594 Y97.457 E0.00636 ; perimeter
G1 X100.580 Y97.405 E0.00253 ; perimeter
G1 X100.626 Y97.049 E0.01662 ; perimeter
G1 X100.767 Y96.827 E0.01216 ; perimeter
G1 X100.896 Y96.708 E0.00814 ; perimeter
G1 X101.113 Y96.558 E0.01224 ; perimeter
G1 X101.609 Y96.303 E0.02585 ; perimeter
G1 X101.735 Y96.212 E0.00717 ; perimeter
G1 X102.279 Y95.774 E0.03235 ; perimeter
G1 X102.625 Y95.407 E0.02341 ; perimeter
G1 X102.996 Y95.166 E0.02046 ; perimeter
G1 X103.260 Y95.047 E0.01340 ; perimeter
G1 X103.961 Y94.835 E0.03396 ; perimeter
G1 X104.318 Y94.586 E0.02015 ; perimeter
G1 X104.671 Y94.553 E0.01640 ; perimeter
G1 X104.976 Y94.633 E0.01462 ; perimeter
G1 X105.119 Y94.715 E0.00765 ; perimeter
G1 X104.974 Y94.791 E0.00759 ; perimeter
G1 X104.892 Y94.995 E0.01017 ; perimeter
G1 X104.802 Y95.075 E0.00559 ; perimeter
G1 X104.739 Y95.214 E0.00706 ; perimeter
G1 X104.503 Y95.401 E0.01397 ; perimeter
G1 X103.931 Y95.692 E0.02972 ; perimeter
G1 X103.438 Y95.836 E0.02377 ; perimeter
G1 X103.095 Y95.882 E0.01606 ; perimeter
G1 X102.727 Y95.908 E0.01709 ; perimeter
G1 X102.259 Y95.894 E0.02166 ; perimeter
G1 X101.806 Y96.238 E0.02635 ; perimeter
G1 X101.601 Y96.623 E0.02019 ; perimeter
G1 X101.646 Y96.697 E0.00401 ; perimeter
G1 X101.575 Y96.854 E0.00800 ; perimeter
G1 X101.547 Y97.068 E0.01001 ; perimeter
G1 X101.311 Y97.525 E0.02381 ; perimeter
G1 X101.214 Y97.603 E0.00578 ; perimeter
G1 X101.041 Y97.795 E0.01194 ; perimeter
G1 X100.939 Y97.829 E0.00501 ; perimeter
G1 X100.763 Y97.829 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.819 Y97.950 E-0.04498 ; wipe and retract
G1 X100.787 Y97.810 E-0.03785 ; wipe and retract
G1 X100.709 Y97.746 E-0.02661 ; wipe and retract
G1 X100.673 Y97.570 E-0.04737 ; wipe and retract
G1 X100.594 Y97.457 E-0.03621 ; wipe and retract
G1 X100.580 Y97.405 E-0.01441 ; wipe and retract
G1 X100.626 Y97.049 E-0.09469 ; wipe and retract
G1 X100.767 Y96.827 E-0.06928 ; wipe and retract
G1 X100.896 Y96.708 E-0.04636 ; wipe and retract
G1 X101.113 Y96.558 E-0.06970 ; wipe and retract
G1 X101.609 Y96.303 E-0.14727 ; wipe and retract
G1 X101.735 Y96.212 E-0.04082 ; wipe and retract
G1 X102.279 Y95.774 E-0.18428 ; wipe and retract
G1 X102.625 Y95.407 E-0.13334 ; wipe and retract
G1 X102.996 Y95.166 E-0.11657 ; wipe and retract
G1 X103.260 Y95.047 E-0.07633 ; wipe and retract
G1 X103.961 Y94.835 E-0.19350 ; wipe and retract
G1 X104.318 Y94.586 E-0.11478 ; wipe and retract
G1 X104.671 Y94.553 E-0.09343 ; wipe and retract
G1 X104.976 Y94.633 E-0.08329 ; wipe and retract
G1 X105.119 Y94.715 E-0.04360 ; wipe and retract
G1 X104.974 Y94.791 E-0.04322 ; wipe and retract
G1 X104.892 Y94.995 E-0.05793 ; wipe and retract
G1 X104.802 Y95.075 E-0.03183 ; wipe and retract
G1 X104.739 Y95.214 E-0.04021 ; wipe and retract
G1 X104.503 Y95.401 E-0.07956 ; wipe and retract
G1 X103.931 Y95.692 E-0.16932 ; wipe and retract
G1 X103.438 Y95.836 E-0.13542 ; wipe and retract
G1 X103.409 Y95.840 E-0.00784 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X106.040 Y94.848 ; move to first perimeter point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.875 Y94.742 E0.00909 ; perimeter
G1 X105.841 Y94.663 E0.00401 ; perimeter
G1 X105.867 Y94.621 E0.00230 ; perimeter
G1 X106.045 Y94.596 E0.00834 ; perimeter
G1 X106.246 Y94.490 E0.01051 ; perimeter
G1 X106.513 Y94.488 E0.01237 ; perimeter
G1 X106.771 Y94.581 E0.01273 ; perimeter
G1 X106.854 Y94.645 E0.00484 ; perimeter
G1 X106.972 Y94.811 E0.00942 ; perimeter
G1 X107.020 Y94.950 E0.00680 ; perimeter
G1 X106.966 Y95.227 E0.01310 ; perimeter
G1 X106.921 Y95.290 E0.00356 ; perimeter
G1 X106.734 Y95.354 E0.00915 ; perimeter
G1 X106.577 Y95.360 E0.00729 ; perimeter
G1 X106.309 Y95.273 E0.01306 ; perimeter
G1 X106.058 Y95.067 E0.01504 ; perimeter
G1 X106.045 Y94.908 E0.00737 ; perimeter
G1 X106.077 Y94.656 F10800.000 ; move inwards before travel
G1 X104.551 Y95.044 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.311902
G1 F2400.000
G1 X104.446 Y94.951 E0.00314 ; infill
G1 X104.277 Y95.085 E0.00482 ; infill
G1 X104.079 Y95.200 E0.00512 ; infill
G1 X103.787 Y95.312 E0.00700 ; infill
G1 X102.762 Y95.613 E0.02389 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.787 Y95.312 E-0.28188 ; wipe and retract
G1 X104.079 Y95.200 E-0.08262 ; wipe and retract
G1 X104.277 Y95.085 E-0.06043 ; wipe and retract
G1 X104.446 Y94.951 E-0.05681 ; wipe and retract
G1 X104.551 Y95.044 E-0.03710 ; wipe and retract
;WIPE_END
G1 E-1.88117 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 X100.856 Y97.411 ; move to first infill point
G1 Z23.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.117834
G1 F2400.000
G1 X101.347 Y96.729 E0.00523 ; infill
G1 X101.351 Y96.733 F10800.000 ; move to first infill point
;WIDTH:0.370724
G1 F2400.000
G1 X101.080 Y97.089 E0.01218 ; infill
G1 X100.996 Y97.272 E0.00549 ; infill
;WIDTH:0.35266
G1 X100.972 Y97.313 E0.00124 ; infill
;WIDTH:0.314674
G1 X100.959 Y97.338 E0.00063 ; infill
;WIDTH:0.295239
G1 X100.945 Y97.541 E0.00427 ; infill
;LAYER_CHANGE
;Z:23.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;23.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.959 Y97.338 E-0.05376 ; wipe and retract
;WIPE_END
G1 E-2.34624 F2400.000 ; retract
G1 Z23.675 F10800.000 ; lift Z
G1 Z23.800 ; move to next layer (118)
;AFTER_LAYER_CHANGE
;23.8
G1 Z23.875 ; lift Z
G1 X115.266 Y105.521 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.387 Y105.475 E0.00599 ; perimeter
G1 X115.521 Y105.475 E0.00623 ; perimeter
G1 X115.644 Y105.516 E0.00600 ; perimeter
G1 X115.793 Y105.661 E0.00963 ; perimeter
G1 X115.846 Y105.798 E0.00684 ; perimeter
G1 X115.847 Y106.044 E0.01136 ; perimeter
G1 X115.767 Y106.224 E0.00914 ; perimeter
G1 X115.703 Y106.285 E0.00409 ; perimeter
G1 X115.523 Y106.354 E0.00895 ; perimeter
G1 X115.427 Y106.351 E0.00444 ; perimeter
G1 X115.255 Y106.283 E0.00857 ; perimeter
G1 X115.111 Y106.111 E0.01037 ; perimeter
G1 X115.072 Y106.018 E0.00469 ; perimeter
G1 X115.074 Y105.795 E0.01034 ; perimeter
G1 X115.187 Y105.589 E0.01087 ; perimeter
G1 X115.220 Y105.560 E0.00205 ; perimeter
G1 X115.381 Y105.582 F10800.000 ; move inwards before travel
G1 X115.458 Y105.828 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.295578
G1 F2400.000
G1 X115.462 Y105.851 E0.00048 ; infill
;WIDTH:0.32311
G1 X115.465 Y105.873 E0.00053 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.462 Y105.851 E-0.00599 ; wipe and retract
;WIPE_END
G1 E-2.39401 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X115.470 Y109.709 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.618 Y109.798 E0.00801 ; perimeter
G1 X115.779 Y110.077 E0.01489 ; perimeter
G1 X115.859 Y110.349 E0.01314 ; perimeter
G1 X115.887 Y110.526 E0.00833 ; perimeter
G1 X115.866 Y110.835 E0.01431 ; perimeter
G1 X115.802 Y110.947 E0.00599 ; perimeter
G1 X115.691 Y111.051 E0.00704 ; perimeter
G1 X115.496 Y111.087 E0.00918 ; perimeter
G1 X115.324 Y111.037 E0.00829 ; perimeter
G1 X115.257 Y110.982 E0.00401 ; perimeter
G1 X115.198 Y110.883 E0.00534 ; perimeter
G1 X115.147 Y110.715 E0.00814 ; perimeter
G1 X115.154 Y110.441 E0.01269 ; perimeter
G1 X115.234 Y110.281 E0.00828 ; perimeter
G1 X115.281 Y110.037 E0.01151 ; perimeter
G1 X115.338 Y109.862 E0.00853 ; perimeter
G1 X115.402 Y109.816 E0.00367 ; perimeter
G1 X115.438 Y109.760 E0.00305 ; perimeter
G1 X115.545 Y109.865 F10800.000 ; move inwards before travel
G1 X115.542 Y110.149 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.204708
G1 F2400.000
G1 X115.537 Y110.396 E0.00332 ; infill
;WIDTH:0.223888
G1 X115.497 Y110.836 E0.00666 ; infill
G1 X115.520 Y110.722 F10800.000 ; move to first infill point
;WIDTH:0.294363
G1 F2400.000
G1 X115.495 Y110.198 E0.01096 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.520 Y110.722 E-0.13834 ; wipe and retract
;WIPE_END
G1 E-2.26166 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X115.446 Y114.666 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.562 Y114.724 E0.00599 ; perimeter
G1 X115.691 Y114.912 E0.01057 ; perimeter
G1 X115.704 Y115.135 E0.01032 ; perimeter
G1 X115.632 Y115.305 E0.00855 ; perimeter
G1 X115.568 Y115.379 E0.00457 ; perimeter
G1 X115.457 Y115.447 E0.00601 ; perimeter
G1 X115.319 Y115.479 E0.00658 ; perimeter
G1 X115.099 Y115.428 E0.01046 ; perimeter
G1 X114.726 Y115.231 E0.01954 ; perimeter
G1 X114.318 Y115.175 E0.01905 ; perimeter
G1 X114.185 Y115.248 E0.00708 ; perimeter
G1 X113.830 Y115.359 E0.01719 ; perimeter
G1 X113.611 Y115.371 E0.01017 ; perimeter
G1 X113.445 Y115.323 E0.00802 ; perimeter
G1 X113.353 Y115.264 E0.00504 ; perimeter
G1 X113.300 Y115.193 E0.00410 ; perimeter
G1 X113.256 Y115.079 E0.00568 ; perimeter
G1 X113.256 Y114.936 E0.00664 ; perimeter
G1 X113.310 Y114.783 E0.00749 ; perimeter
G1 X113.390 Y114.691 E0.00564 ; perimeter
G1 X113.522 Y114.609 E0.00725 ; perimeter
G1 X113.732 Y114.572 E0.00985 ; perimeter
G1 X113.982 Y114.636 E0.01193 ; perimeter
G1 X114.254 Y114.763 E0.01394 ; perimeter
G1 X114.681 Y114.832 E0.02006 ; perimeter
G1 X114.895 Y114.786 E0.01014 ; perimeter
G1 X115.240 Y114.658 E0.01702 ; perimeter
G1 X115.386 Y114.664 E0.00679 ; perimeter
G1 X115.483 Y114.790 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.562 Y114.724 E-0.04900 ; wipe and retract
G1 X115.691 Y114.912 E-0.06024 ; wipe and retract
G1 X115.704 Y115.135 E-0.05880 ; wipe and retract
G1 X115.632 Y115.305 E-0.04872 ; wipe and retract
G1 X115.568 Y115.379 E-0.02603 ; wipe and retract
G1 X115.457 Y115.447 E-0.03425 ; wipe and retract
G1 X115.319 Y115.479 E-0.03747 ; wipe and retract
G1 X115.099 Y115.428 E-0.05960 ; wipe and retract
G1 X114.726 Y115.231 E-0.11129 ; wipe and retract
G1 X114.318 Y115.175 E-0.10851 ; wipe and retract
G1 X114.185 Y115.248 E-0.04031 ; wipe and retract
G1 X113.830 Y115.359 E-0.09790 ; wipe and retract
G1 X113.611 Y115.371 E-0.05796 ; wipe and retract
G1 X113.445 Y115.323 E-0.04570 ; wipe and retract
G1 X113.353 Y115.264 E-0.02872 ; wipe and retract
G1 X113.300 Y115.193 E-0.02335 ; wipe and retract
G1 X113.256 Y115.079 E-0.03234 ; wipe and retract
G1 X113.256 Y114.936 E-0.03780 ; wipe and retract
G1 X113.310 Y114.783 E-0.04269 ; wipe and retract
G1 X113.390 Y114.691 E-0.03211 ; wipe and retract
G1 X113.522 Y114.609 E-0.04131 ; wipe and retract
G1 X113.732 Y114.572 E-0.05612 ; wipe and retract
G1 X113.982 Y114.636 E-0.06796 ; wipe and retract
G1 X114.254 Y114.763 E-0.07939 ; wipe and retract
G1 X114.681 Y114.832 E-0.11430 ; wipe and retract
G1 X114.895 Y114.786 E-0.05778 ; wipe and retract
G1 X115.240 Y114.658 E-0.09696 ; wipe and retract
G1 X115.386 Y114.664 E-0.03868 ; wipe and retract
;WIPE_END
G1 E-0.81472 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X112.482 Y112.831 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.375 Y112.972 E0.00822 ; perimeter
G1 X112.180 Y113.048 E0.00966 ; perimeter
G1 X111.957 Y113.034 E0.01039 ; perimeter
G1 X111.759 Y112.956 E0.00984 ; perimeter
G1 X111.682 Y112.907 E0.00422 ; perimeter
G1 X111.421 Y112.616 E0.01813 ; perimeter
G1 X111.290 Y112.401 E0.01165 ; perimeter
G1 X111.285 Y112.251 E0.00694 ; perimeter
G1 X111.258 Y112.142 E0.00522 ; perimeter
G1 X111.364 Y112.067 E0.00603 ; perimeter
G1 X111.708 Y112.025 E0.01604 ; perimeter
G1 X111.913 Y112.070 E0.00974 ; perimeter
G1 X112.108 Y112.140 E0.00957 ; perimeter
G1 X112.418 Y112.386 E0.01835 ; perimeter
G1 X112.512 Y112.552 E0.00883 ; perimeter
G1 X112.489 Y112.771 E0.01022 ; perimeter
G1 X112.307 Y112.855 F10800.000 ; move inwards before travel
G1 X112.229 Y112.765 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.287629
G1 F2400.000
G1 X111.557 Y112.286 E0.01680 ; infill
G1 X111.961 Y112.573 F10800.000 ; move to first infill point
;WIDTH:0.370264
G1 F2400.000
G1 X112.107 Y112.641 E0.00441 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.961 Y112.573 E-0.04273 ; wipe and retract
;WIPE_END
G1 E-2.35727 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X108.432 Y110.150 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.331 Y110.259 E0.00688 ; perimeter
G1 X108.166 Y110.308 E0.00794 ; perimeter
G1 X107.976 Y110.290 E0.00886 ; perimeter
G1 X107.781 Y110.216 E0.00966 ; perimeter
G1 X107.511 Y110.034 E0.01508 ; perimeter
G1 X107.371 Y109.825 E0.01169 ; perimeter
G1 X107.365 Y109.610 E0.00995 ; perimeter
G1 X107.394 Y109.546 E0.00324 ; perimeter
G1 X107.561 Y109.404 E0.01014 ; perimeter
G1 X107.743 Y109.364 E0.00862 ; perimeter
G1 X108.082 Y109.412 E0.01589 ; perimeter
G1 X108.308 Y109.575 E0.01292 ; perimeter
G1 X108.379 Y109.679 E0.00584 ; perimeter
G1 X108.406 Y109.739 E0.00302 ; perimeter
G1 X108.407 Y109.872 E0.00619 ; perimeter
G1 X108.447 Y110.092 E0.01033 ; perimeter
G1 X108.284 Y110.157 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.331 Y110.259 E-0.05366 ; wipe and retract
G1 X108.166 Y110.308 E-0.04525 ; wipe and retract
G1 X107.976 Y110.290 E-0.05050 ; wipe and retract
G1 X107.781 Y110.216 E-0.05506 ; wipe and retract
G1 X107.511 Y110.034 E-0.08591 ; wipe and retract
G1 X107.371 Y109.825 E-0.06658 ; wipe and retract
G1 X107.365 Y109.610 E-0.05668 ; wipe and retract
G1 X107.394 Y109.546 E-0.01848 ; wipe and retract
G1 X107.561 Y109.404 E-0.05779 ; wipe and retract
G1 X107.743 Y109.364 E-0.04911 ; wipe and retract
G1 X108.082 Y109.412 E-0.09051 ; wipe and retract
G1 X108.308 Y109.575 E-0.07361 ; wipe and retract
G1 X108.379 Y109.679 E-0.03326 ; wipe and retract
G1 X108.406 Y109.739 E-0.01720 ; wipe and retract
G1 X108.407 Y109.872 E-0.03529 ; wipe and retract
G1 X108.447 Y110.092 E-0.05886 ; wipe and retract
;WIPE_END
G1 E-1.55226 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X103.939 Y107.131 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.848 Y107.208 E0.00551 ; perimeter
G1 X103.685 Y107.278 E0.00820 ; perimeter
G1 X103.542 Y107.294 E0.00667 ; perimeter
G1 X103.336 Y107.261 E0.00967 ; perimeter
G1 X103.117 Y107.152 E0.01131 ; perimeter
G1 X103.019 Y107.065 E0.00609 ; perimeter
G1 X102.979 Y107.007 E0.00327 ; perimeter
G1 X102.924 Y106.837 E0.00828 ; perimeter
G1 X102.939 Y106.700 E0.00638 ; perimeter
G1 X102.969 Y106.629 E0.00356 ; perimeter
G1 X103.052 Y106.540 E0.00565 ; perimeter
G1 X103.208 Y106.475 E0.00784 ; perimeter
G1 X103.441 Y106.455 E0.01082 ; perimeter
G1 X103.641 Y106.497 E0.00948 ; perimeter
G1 X103.866 Y106.633 E0.01217 ; perimeter
G1 X103.952 Y106.745 E0.00653 ; perimeter
G1 X104.005 Y106.897 E0.00747 ; perimeter
G1 X103.959 Y107.075 E0.00850 ; perimeter
G1 X103.820 Y107.123 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.848 Y107.208 E-0.04576 ; wipe and retract
G1 X103.685 Y107.278 E-0.04672 ; wipe and retract
G1 X103.542 Y107.294 E-0.03797 ; wipe and retract
G1 X103.336 Y107.261 E-0.05507 ; wipe and retract
G1 X103.117 Y107.152 E-0.06443 ; wipe and retract
G1 X103.019 Y107.065 E-0.03467 ; wipe and retract
G1 X102.979 Y107.007 E-0.01860 ; wipe and retract
G1 X102.924 Y106.837 E-0.04715 ; wipe and retract
G1 X102.939 Y106.700 E-0.03634 ; wipe and retract
G1 X102.969 Y106.629 E-0.02026 ; wipe and retract
G1 X103.052 Y106.540 E-0.03216 ; wipe and retract
G1 X103.208 Y106.475 E-0.04468 ; wipe and retract
G1 X103.441 Y106.455 E-0.06162 ; wipe and retract
G1 X103.641 Y106.497 E-0.05400 ; wipe and retract
G1 X103.866 Y106.633 E-0.06931 ; wipe and retract
G1 X103.952 Y106.745 E-0.03718 ; wipe and retract
G1 X104.005 Y106.897 E-0.04257 ; wipe and retract
G1 X103.959 Y107.075 E-0.04845 ; wipe and retract
;WIPE_END
G1 E-1.60308 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X100.189 Y102.501 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.249 Y102.315 E0.00903 ; perimeter
G1 X100.393 Y102.226 E0.00787 ; perimeter
G1 X100.501 Y102.057 E0.00930 ; perimeter
G1 X100.554 Y102.028 E0.00280 ; perimeter
G1 X100.670 Y102.024 E0.00538 ; perimeter
G1 X100.822 Y102.163 E0.00953 ; perimeter
G1 X100.972 Y102.401 E0.01301 ; perimeter
G1 X101.033 Y102.721 E0.01511 ; perimeter
G1 X101.028 Y103.053 E0.01536 ; perimeter
G1 X101.066 Y103.191 E0.00661 ; perimeter
G1 X101.067 Y103.326 E0.00628 ; perimeter
G1 X101.354 Y103.841 E0.02730 ; perimeter
G1 X101.427 Y104.239 E0.01873 ; perimeter
G1 X101.373 Y104.455 E0.01030 ; perimeter
G1 X101.270 Y104.648 E0.01016 ; perimeter
G1 X101.198 Y104.699 E0.00407 ; perimeter
G1 X101.095 Y104.718 E0.00485 ; perimeter
G1 X100.890 Y104.675 E0.00971 ; perimeter
G1 X100.770 Y104.575 E0.00722 ; perimeter
G1 X100.688 Y104.446 E0.00710 ; perimeter
G1 X100.580 Y103.774 E0.03150 ; perimeter
G1 X100.582 Y103.621 E0.00709 ; perimeter
G1 X100.412 Y103.204 E0.02086 ; perimeter
G1 X100.297 Y103.046 E0.00903 ; perimeter
G1 X100.203 Y102.795 E0.01246 ; perimeter
G1 X100.183 Y102.561 E0.01089 ; perimeter
G1 X100.370 Y102.428 F10800.000 ; move inwards before travel
G1 X100.542 Y102.418 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.223226
G1 F2400.000
G1 X100.703 Y103.054 E0.00984 ; infill
;WIDTH:0.211727
G1 X100.708 Y103.082 E0.00040 ; infill
;WIDTH:0.200315
G1 X100.757 Y103.233 E0.00208 ; infill
;WIDTH:0.178245
G1 X100.773 Y103.312 E0.00090 ; infill
;WIDTH:0.148251
G1 X100.789 Y103.390 E0.00070 ; infill
;WIDTH:0.118257
G1 X100.873 Y103.576 E0.00127 ; infill
G1 X100.725 Y103.334 F10800.000 ; move to first infill point
;WIDTH:0.377015
G1 F2400.000
G1 X100.592 Y102.581 E0.02126 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.725 Y103.334 E-0.20196 ; wipe and retract
;WIPE_END
G1 E-2.19804 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X100.435 Y99.992 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.127 Y99.953 E0.01436 ; perimeter
G1 X100.018 Y99.825 E0.00781 ; perimeter
G1 X99.930 Y99.754 E0.00525 ; perimeter
G1 X99.878 Y99.556 E0.00947 ; perimeter
G1 X99.955 Y99.207 E0.01656 ; perimeter
G1 X100.129 Y98.923 E0.01542 ; perimeter
G1 X100.328 Y98.735 E0.01271 ; perimeter
G1 X100.438 Y98.540 E0.01037 ; perimeter
G1 X100.687 Y98.313 E0.01559 ; perimeter
G1 X100.621 Y98.065 E0.01188 ; perimeter
G1 X100.664 Y97.920 E0.00703 ; perimeter
G1 X100.601 Y97.556 E0.01708 ; perimeter
G1 X100.678 Y97.048 E0.02381 ; perimeter
G1 X100.818 Y96.846 E0.01138 ; perimeter
G1 X101.045 Y96.724 E0.01195 ; perimeter
G1 X101.369 Y96.667 E0.01523 ; perimeter
G1 X101.486 Y96.859 E0.01043 ; perimeter
G1 X101.433 Y97.342 E0.02251 ; perimeter
G1 X101.261 Y97.715 E0.01904 ; perimeter
G1 X101.042 Y97.959 E0.01519 ; perimeter
G1 X100.855 Y98.578 E0.02993 ; perimeter
G1 X100.833 Y98.864 E0.01332 ; perimeter
G1 X100.799 Y98.988 E0.00594 ; perimeter
G1 X100.723 Y99.527 E0.02520 ; perimeter
G1 X100.562 Y99.875 E0.01778 ; perimeter
G1 X100.479 Y99.951 E0.00521 ; perimeter
G1 X100.217 Y99.771 F10800.000 ; move inwards before travel
G1 X100.144 Y99.617 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.0993723
G1 F2400.000
G1 X100.559 Y98.865 E0.00403 ; infill
G1 X100.872 Y97.711 F10800.000 ; move to first infill point
;WIDTH:0.265532
G1 F2400.000
G1 X100.963 Y97.519 E0.00393 ; infill
;WIDTH:0.307269
G1 X101.006 Y97.377 E0.00326 ; infill
;WIDTH:0.349004
G1 X101.049 Y97.235 E0.00378 ; infill
G1 X101.082 Y96.977 E0.00661 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.049 Y97.235 E-0.06858 ; wipe and retract
G1 X101.006 Y97.377 E-0.03914 ; wipe and retract
;WIPE_END
G1 E-2.29227 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X104.761 Y94.919 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.604 Y95.318 E0.01985 ; perimeter
G1 X104.476 Y95.461 E0.00892 ; perimeter
G1 X104.219 Y95.614 E0.01384 ; perimeter
G1 X103.763 Y95.761 E0.02220 ; perimeter
G1 X103.509 Y95.757 E0.01179 ; perimeter
G1 X103.191 Y95.791 E0.01481 ; perimeter
G1 X102.863 Y95.720 E0.01554 ; perimeter
G1 X102.763 Y95.632 E0.00619 ; perimeter
G1 X102.806 Y95.588 E0.00287 ; perimeter
G1 X102.896 Y95.389 E0.01009 ; perimeter
G1 X102.993 Y95.281 E0.00671 ; perimeter
G1 X103.185 Y95.155 E0.01066 ; perimeter
G1 X103.587 Y94.955 E0.02083 ; perimeter
G1 X104.098 Y94.796 E0.02476 ; perimeter
G1 X104.237 Y94.700 E0.00784 ; perimeter
G1 X104.533 Y94.679 E0.01374 ; perimeter
G1 X104.580 Y94.720 E0.00288 ; perimeter
G1 X104.718 Y94.760 E0.00663 ; perimeter
G1 X104.745 Y94.861 E0.00485 ; perimeter
G1 X104.414 Y95.117 F10800.000 ; move inwards before travel
G1 X104.404 Y95.166 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.283603
G1 F2400.000
G1 X104.304 Y95.092 E0.00249 ; infill
G1 X104.210 Y95.167 E0.00240 ; infill
;WIDTH:0.378469
G1 X103.233 Y95.544 E0.02923 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.210 Y95.167 E-0.27646 ; wipe and retract
;WIPE_END
G1 E-2.12354 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X106.153 Y95.050 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.147 Y94.788 E0.01216 ; perimeter
G1 X106.195 Y94.645 E0.00696 ; perimeter
G1 X106.338 Y94.559 E0.00773 ; perimeter
G1 X106.580 Y94.549 E0.01123 ; perimeter
G1 X106.828 Y94.627 E0.01203 ; perimeter
G1 X106.946 Y94.710 E0.00666 ; perimeter
G1 X107.059 Y94.865 E0.00892 ; perimeter
G1 X107.113 Y95.034 E0.00823 ; perimeter
G1 X107.111 Y95.283 E0.01153 ; perimeter
G1 X107.032 Y95.350 E0.00479 ; perimeter
G1 X106.834 Y95.427 E0.00984 ; perimeter
G1 X106.619 Y95.425 E0.00997 ; perimeter
G1 X106.365 Y95.336 E0.01246 ; perimeter
G1 X106.263 Y95.233 E0.00672 ; perimeter
G1 X106.184 Y95.101 E0.00712 ; perimeter
G1 X106.345 Y94.871 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.147 Y94.788 E-0.08339 ; wipe and retract
G1 X106.195 Y94.645 E-0.03966 ; wipe and retract
G1 X106.338 Y94.559 E-0.04406 ; wipe and retract
G1 X106.580 Y94.549 E-0.06395 ; wipe and retract
G1 X106.828 Y94.627 E-0.06856 ; wipe and retract
G1 X106.946 Y94.710 E-0.03797 ; wipe and retract
G1 X107.059 Y94.865 E-0.05080 ; wipe and retract
G1 X107.113 Y95.034 E-0.04687 ; wipe and retract
G1 X107.111 Y95.283 E-0.06571 ; wipe and retract
G1 X107.032 Y95.350 E-0.02727 ; wipe and retract
G1 X106.834 Y95.427 E-0.05603 ; wipe and retract
G1 X106.619 Y95.425 E-0.05681 ; wipe and retract
G1 X106.365 Y95.336 E-0.07096 ; wipe and retract
G1 X106.263 Y95.233 E-0.03830 ; wipe and retract
G1 X106.184 Y95.101 E-0.04059 ; wipe and retract
;WIPE_END
G1 E-1.60906 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X109.763 Y96.227 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.694 Y96.288 E0.00430 ; perimeter
G1 X109.471 Y96.327 E0.01047 ; perimeter
G1 X109.321 Y96.291 E0.00715 ; perimeter
G1 X108.728 Y95.940 E0.03191 ; perimeter
G1 X108.659 Y95.835 E0.00583 ; perimeter
G1 X108.651 Y95.691 E0.00668 ; perimeter
G1 X108.751 Y95.530 E0.00876 ; perimeter
G1 X109.018 Y95.388 E0.01404 ; perimeter
G1 X109.326 Y95.367 E0.01426 ; perimeter
G1 X109.479 Y95.378 E0.00712 ; perimeter
G1 X109.632 Y95.425 E0.00741 ; perimeter
G1 X109.774 Y95.538 E0.00842 ; perimeter
G1 X109.863 Y95.746 E0.01047 ; perimeter
G1 X109.863 Y95.879 E0.00616 ; perimeter
G1 X109.761 Y96.167 E0.01416 ; perimeter
G1 X109.671 Y96.217 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.694 Y96.288 E-0.03657 ; wipe and retract
G1 X109.471 Y96.327 E-0.05966 ; wipe and retract
G1 X109.321 Y96.291 E-0.04073 ; wipe and retract
G1 X108.728 Y95.940 E-0.18180 ; wipe and retract
G1 X108.659 Y95.835 E-0.03320 ; wipe and retract
G1 X108.651 Y95.691 E-0.03804 ; wipe and retract
G1 X108.751 Y95.530 E-0.04991 ; wipe and retract
G1 X109.018 Y95.388 E-0.07998 ; wipe and retract
G1 X109.326 Y95.367 E-0.08125 ; wipe and retract
G1 X109.479 Y95.378 E-0.04058 ; wipe and retract
G1 X109.632 Y95.425 E-0.04219 ; wipe and retract
G1 X109.774 Y95.538 E-0.04796 ; wipe and retract
G1 X109.863 Y95.746 E-0.05963 ; wipe and retract
G1 X109.863 Y95.879 E-0.03510 ; wipe and retract
G1 X109.761 Y96.167 E-0.08069 ; wipe and retract
;WIPE_END
G1 E-1.49272 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 X111.274 Y97.724 ; move to first perimeter point
G1 Z23.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.307 Y97.657 E0.00346 ; perimeter
G1 X111.437 Y97.599 E0.00661 ; perimeter
G1 X111.495 Y97.521 E0.00449 ; perimeter
G1 X111.635 Y97.500 E0.00657 ; perimeter
G1 X111.909 Y97.533 E0.01277 ; perimeter
G1 X112.048 Y97.629 E0.00783 ; perimeter
G1 X112.309 Y97.978 E0.02017 ; perimeter
G1 X112.676 Y98.571 E0.03234 ; perimeter
G1 X112.881 Y98.804 E0.01434 ; perimeter
G1 X113.121 Y99.175 E0.02048 ; perimeter
G1 X113.395 Y99.538 E0.02106 ; perimeter
G1 X113.614 Y99.951 E0.02167 ; perimeter
G1 X113.804 Y100.100 E0.01118 ; perimeter
G1 X113.945 Y100.293 E0.01106 ; perimeter
G1 X114.051 Y100.537 E0.01234 ; perimeter
G1 X114.078 Y100.913 E0.01748 ; perimeter
G1 X113.980 Y101.134 E0.01118 ; perimeter
G1 X113.898 Y101.190 E0.00458 ; perimeter
G1 X113.771 Y101.194 E0.00588 ; perimeter
G1 X113.564 Y101.120 E0.01016 ; perimeter
G1 X113.467 Y101.049 E0.00559 ; perimeter
G1 X113.272 Y100.751 E0.01652 ; perimeter
G1 X113.203 Y100.531 E0.01067 ; perimeter
G1 X112.944 Y100.059 E0.02493 ; perimeter
G1 X111.304 Y98.114 E0.11786 ; perimeter
G1 X111.297 Y98.030 E0.00389 ; perimeter
G1 X111.241 Y97.863 E0.00817 ; perimeter
G1 X111.260 Y97.783 E0.00383 ; perimeter
G1 X111.346 Y97.706 F10800.000 ; move inwards before travel
G1 X111.707 Y97.931 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.417176
G1 F2400.000
G1 X111.743 Y97.955 E0.00134 ; infill
G1 X112.091 Y98.409 E0.01781 ; infill
;WIDTH:0.384552
G1 X112.229 Y98.598 E0.00664 ; infill
;WIDTH:0.350552
G1 X112.366 Y98.787 E0.00598 ; infill
;WIDTH:0.316551
G1 X112.703 Y99.204 E0.01219 ; infill
;WIDTH:0.294545
G1 X112.829 Y99.374 E0.00443 ; infill
;WIDTH:0.267686
G1 X113.106 Y99.722 E0.00830 ; infill
;WIDTH:0.243782
G1 X113.206 Y99.870 E0.00298 ; infill
;WIDTH:0.20549
G1 X113.356 Y100.146 E0.00425 ; infill
G1 X113.831 Y100.839 E0.01136 ; infill
;LAYER_CHANGE
;Z:24
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;24
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.356 Y100.146 E-0.22170 ; wipe and retract
G1 X113.206 Y99.870 E-0.08289 ; wipe and retract
;WIPE_END
G1 E-2.09541 F2400.000 ; retract
G1 Z23.875 F10800.000 ; lift Z
G1 Z24.000 ; move to next layer (119)
;AFTER_LAYER_CHANGE
;24
G1 Z24.075 ; lift Z
G1 X115.279 Y105.438 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.389 Y105.398 E0.00542 ; perimeter
G1 X115.518 Y105.397 E0.00594 ; perimeter
G1 X115.642 Y105.440 E0.00609 ; perimeter
G1 X115.786 Y105.570 E0.00898 ; perimeter
G1 X115.846 Y105.744 E0.00851 ; perimeter
G1 X115.846 Y105.962 E0.01013 ; perimeter
G1 X115.766 Y106.145 E0.00921 ; perimeter
G1 X115.692 Y106.217 E0.00481 ; perimeter
G1 X115.558 Y106.271 E0.00670 ; perimeter
G1 X115.416 Y106.271 E0.00658 ; perimeter
G1 X115.242 Y106.209 E0.00852 ; perimeter
G1 X115.091 Y106.013 E0.01147 ; perimeter
G1 X115.063 Y105.933 E0.00393 ; perimeter
G1 X115.062 Y105.751 E0.00845 ; perimeter
G1 X115.149 Y105.557 E0.00982 ; perimeter
G1 X115.235 Y105.478 E0.00541 ; perimeter
G1 X115.382 Y105.493 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.389 Y105.398 E-0.04589 ; wipe and retract
G1 X115.518 Y105.397 E-0.03384 ; wipe and retract
G1 X115.642 Y105.440 E-0.03467 ; wipe and retract
G1 X115.786 Y105.570 E-0.05118 ; wipe and retract
G1 X115.846 Y105.744 E-0.04848 ; wipe and retract
G1 X115.846 Y105.962 E-0.05769 ; wipe and retract
G1 X115.766 Y106.145 E-0.05245 ; wipe and retract
G1 X115.692 Y106.217 E-0.02739 ; wipe and retract
G1 X115.558 Y106.271 E-0.03820 ; wipe and retract
G1 X115.416 Y106.271 E-0.03750 ; wipe and retract
G1 X115.242 Y106.209 E-0.04852 ; wipe and retract
G1 X115.091 Y106.013 E-0.06536 ; wipe and retract
G1 X115.063 Y105.933 E-0.02237 ; wipe and retract
G1 X115.062 Y105.751 E-0.04812 ; wipe and retract
G1 X115.149 Y105.557 E-0.05596 ; wipe and retract
G1 X115.235 Y105.478 E-0.03081 ; wipe and retract
;WIPE_END
G1 E-1.70157 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X115.525 Y110.083 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.638 Y110.121 E0.00551 ; perimeter
G1 X115.674 Y110.184 E0.00336 ; perimeter
G1 X115.788 Y110.296 E0.00742 ; perimeter
G1 X115.883 Y110.713 E0.01982 ; perimeter
G1 X115.867 Y110.882 E0.00784 ; perimeter
G1 X115.778 Y111.070 E0.00965 ; perimeter
G1 X115.696 Y111.139 E0.00499 ; perimeter
G1 X115.483 Y111.175 E0.01001 ; perimeter
G1 X115.304 Y111.104 E0.00892 ; perimeter
G1 X115.240 Y111.032 E0.00445 ; perimeter
G1 X115.176 Y110.900 E0.00677 ; perimeter
G1 X115.153 Y110.755 E0.00679 ; perimeter
G1 X115.162 Y110.550 E0.00950 ; perimeter
G1 X115.200 Y110.442 E0.00535 ; perimeter
G1 X115.340 Y110.193 E0.01318 ; perimeter
G1 X115.466 Y110.091 E0.00751 ; perimeter
G1 X115.591 Y110.182 F10800.000 ; move inwards before travel
G1 X115.526 Y110.376 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.24419
G1 F2400.000
G1 X115.508 Y110.617 E0.00405 ; infill
G1 X115.518 Y110.821 E0.00342 ; infill
G1 X115.556 Y110.918 E0.00174 ; infill
G1 X115.486 Y110.917 F10800.000 ; move to first infill point
;WIDTH:0.155487
G1 F2400.000
G1 X115.537 Y110.387 E0.00498 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.486 Y110.917 E-0.14039 ; wipe and retract
;WIPE_END
G1 E-2.25961 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X112.518 Y112.419 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.616 Y112.584 E0.00891 ; perimeter
G1 X112.607 Y112.820 E0.01094 ; perimeter
G1 X112.577 Y112.893 E0.00367 ; perimeter
G1 X112.477 Y112.998 E0.00673 ; perimeter
G1 X112.261 Y113.068 E0.01047 ; perimeter
G1 X112.082 Y113.046 E0.00838 ; perimeter
G1 X111.883 Y112.976 E0.00977 ; perimeter
G1 X111.745 Y112.879 E0.00782 ; perimeter
G1 X111.566 Y112.659 E0.01313 ; perimeter
G1 X111.539 Y112.546 E0.00538 ; perimeter
G1 X111.497 Y112.481 E0.00359 ; perimeter
G1 X111.491 Y112.345 E0.00631 ; perimeter
G1 X111.558 Y112.207 E0.00714 ; perimeter
G1 X111.672 Y112.152 E0.00583 ; perimeter
G1 X111.796 Y112.132 E0.00585 ; perimeter
G1 X112.087 Y112.161 E0.01354 ; perimeter
G1 X112.276 Y112.229 E0.00931 ; perimeter
G1 X112.470 Y112.382 E0.01144 ; perimeter
G1 X112.453 Y112.600 F10800.000 ; move inwards before travel
G1 X112.369 Y112.729 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.305423
G1 F2400.000
G1 X112.173 Y112.655 E0.00457 ; infill
G1 X112.027 Y112.576 E0.00363 ; infill
G1 X111.755 Y112.383 E0.00729 ; infill
G1 X111.742 Y112.417 F10800.000 ; move to first infill point
;WIDTH:0.257571
G1 F2400.000
G1 X111.889 Y112.504 E0.00304 ; infill
;WIDTH:0.273179
G1 X112.368 Y112.761 E0.01041 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.889 Y112.504 E-0.14343 ; wipe and retract
;WIPE_END
G1 E-2.25657 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X113.582 Y114.600 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.795 Y114.557 E0.01005 ; perimeter
G1 X114.062 Y114.616 E0.01265 ; perimeter
G1 X114.352 Y114.750 E0.01480 ; perimeter
G1 X114.710 Y114.800 E0.01678 ; perimeter
G1 X115.071 Y114.721 E0.01711 ; perimeter
G1 X115.230 Y114.662 E0.00785 ; perimeter
G1 X115.445 Y114.670 E0.00996 ; perimeter
G1 X115.570 Y114.734 E0.00650 ; perimeter
G1 X115.688 Y114.903 E0.00954 ; perimeter
G1 X115.702 Y115.142 E0.01110 ; perimeter
G1 X115.633 Y115.300 E0.00800 ; perimeter
G1 X115.569 Y115.373 E0.00446 ; perimeter
G1 X115.461 Y115.434 E0.00575 ; perimeter
G1 X115.307 Y115.465 E0.00729 ; perimeter
G1 X115.103 Y115.420 E0.00965 ; perimeter
G1 X114.806 Y115.266 E0.01548 ; perimeter
G1 X114.403 Y115.207 E0.01889 ; perimeter
G1 X113.977 Y115.331 E0.02052 ; perimeter
G1 X113.663 Y115.353 E0.01457 ; perimeter
G1 X113.534 Y115.316 E0.00625 ; perimeter
G1 X113.429 Y115.249 E0.00578 ; perimeter
G1 X113.344 Y115.108 E0.00761 ; perimeter
G1 X113.327 Y114.958 E0.00702 ; perimeter
G1 X113.373 Y114.795 E0.00784 ; perimeter
G1 X113.471 Y114.670 E0.00735 ; perimeter
G1 X113.532 Y114.632 E0.00331 ; perimeter
G1 X113.753 Y114.734 F10800.000 ; move inwards before travel
G1 X113.689 Y114.990 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.302508
G1 F2400.000
G1 X113.785 Y114.955 E0.00222 ; infill
G1 X114.212 Y114.951 E0.00921 ; infill
G1 X113.689 Y114.990 F10800.000 ; move to first infill point
;WIDTH:0.272962
G1 F2400.000
G1 X113.676 Y115.001 E0.00033 ; infill
;WIDTH:0.244553
G1 X113.631 Y115.029 E0.00089 ; infill
;WIDTH:0.19697
G1 X113.585 Y115.057 E0.00068 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.631 Y115.029 E-0.01404 ; wipe and retract
;WIPE_END
G1 E-2.38596 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X108.317 Y110.089 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.235 Y110.112 E0.00394 ; perimeter
G1 X108.074 Y110.220 E0.00900 ; perimeter
G1 X107.939 Y110.213 E0.00628 ; perimeter
G1 X107.758 Y110.153 E0.00882 ; perimeter
G1 X107.548 Y110.003 E0.01195 ; perimeter
G1 X107.479 Y109.862 E0.00727 ; perimeter
G1 X107.460 Y109.664 E0.00920 ; perimeter
G1 X107.529 Y109.555 E0.00599 ; perimeter
G1 X107.557 Y109.464 E0.00439 ; perimeter
G1 X107.834 Y109.337 E0.01412 ; perimeter
G1 X108.093 Y109.370 E0.01210 ; perimeter
G1 X108.286 Y109.521 E0.01133 ; perimeter
G1 X108.375 Y109.710 E0.00968 ; perimeter
G1 X108.377 Y109.929 E0.01014 ; perimeter
G1 X108.338 Y110.033 E0.00514 ; perimeter
G1 X108.239 Y110.057 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.235 Y110.112 E-0.03429 ; wipe and retract
G1 X108.074 Y110.220 E-0.05126 ; wipe and retract
G1 X107.939 Y110.213 E-0.03577 ; wipe and retract
G1 X107.758 Y110.153 E-0.05025 ; wipe and retract
G1 X107.548 Y110.003 E-0.06806 ; wipe and retract
G1 X107.479 Y109.862 E-0.04144 ; wipe and retract
G1 X107.460 Y109.664 E-0.05240 ; wipe and retract
G1 X107.529 Y109.555 E-0.03411 ; wipe and retract
G1 X107.557 Y109.464 E-0.02504 ; wipe and retract
G1 X107.834 Y109.337 E-0.08046 ; wipe and retract
G1 X108.093 Y109.370 E-0.06892 ; wipe and retract
G1 X108.286 Y109.521 E-0.06454 ; wipe and retract
G1 X108.375 Y109.710 E-0.05516 ; wipe and retract
G1 X108.377 Y109.929 E-0.05774 ; wipe and retract
G1 X108.338 Y110.033 E-0.02927 ; wipe and retract
;WIPE_END
G1 E-1.65127 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X104.070 Y107.159 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.871 Y107.301 E0.01131 ; perimeter
G1 X103.696 Y107.328 E0.00817 ; perimeter
G1 X103.439 Y107.285 E0.01209 ; perimeter
G1 X103.231 Y107.176 E0.01086 ; perimeter
G1 X103.142 Y107.091 E0.00569 ; perimeter
G1 X103.066 Y106.928 E0.00836 ; perimeter
G1 X103.070 Y106.744 E0.00852 ; perimeter
G1 X103.118 Y106.633 E0.00558 ; perimeter
G1 X103.161 Y106.589 E0.00285 ; perimeter
G1 X103.313 Y106.515 E0.00783 ; perimeter
G1 X103.522 Y106.483 E0.00981 ; perimeter
G1 X103.779 Y106.533 E0.01214 ; perimeter
G1 X104.016 Y106.684 E0.01301 ; perimeter
G1 X104.056 Y106.736 E0.00301 ; perimeter
G1 X104.138 Y106.945 E0.01039 ; perimeter
G1 X104.088 Y107.102 E0.00766 ; perimeter
G1 X103.827 Y107.135 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.871 Y107.301 E-0.07770 ; wipe and retract
G1 X103.696 Y107.328 E-0.04655 ; wipe and retract
G1 X103.439 Y107.285 E-0.06887 ; wipe and retract
G1 X103.231 Y107.176 E-0.06187 ; wipe and retract
G1 X103.142 Y107.091 E-0.03239 ; wipe and retract
G1 X103.066 Y106.928 E-0.04764 ; wipe and retract
G1 X103.070 Y106.744 E-0.04856 ; wipe and retract
G1 X103.118 Y106.633 E-0.03180 ; wipe and retract
G1 X103.161 Y106.589 E-0.01626 ; wipe and retract
G1 X103.313 Y106.515 E-0.04460 ; wipe and retract
G1 X103.522 Y106.483 E-0.05589 ; wipe and retract
G1 X103.779 Y106.533 E-0.06914 ; wipe and retract
G1 X104.016 Y106.684 E-0.07410 ; wipe and retract
G1 X104.056 Y106.736 E-0.01715 ; wipe and retract
G1 X104.138 Y106.945 E-0.05921 ; wipe and retract
G1 X104.088 Y107.102 E-0.04364 ; wipe and retract
;WIPE_END
G1 E-1.60464 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X101.434 Y104.172 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.299 Y104.453 E0.01446 ; perimeter
G1 X101.195 Y104.548 E0.00652 ; perimeter
G1 X101.033 Y104.578 E0.00763 ; perimeter
G1 X100.916 Y104.558 E0.00553 ; perimeter
G1 X100.794 Y104.477 E0.00676 ; perimeter
G1 X100.652 Y104.248 E0.01249 ; perimeter
G1 X100.555 Y103.617 E0.02960 ; perimeter
G1 X100.381 Y103.133 E0.02382 ; perimeter
G1 X100.335 Y103.070 E0.00363 ; perimeter
G1 X100.217 Y102.760 E0.01535 ; perimeter
G1 X100.188 Y102.414 E0.01608 ; perimeter
G1 X100.278 Y102.067 E0.01660 ; perimeter
G1 X100.462 Y101.787 E0.01554 ; perimeter
G1 X100.587 Y101.671 E0.00788 ; perimeter
G1 X100.619 Y101.672 E0.00147 ; perimeter
G1 X100.794 Y101.839 E0.01119 ; perimeter
G1 X100.925 Y102.224 E0.01883 ; perimeter
G1 X100.992 Y102.331 E0.00586 ; perimeter
G1 X101.067 Y102.748 E0.01961 ; perimeter
G1 X101.065 Y102.909 E0.00747 ; perimeter
G1 X101.142 Y103.255 E0.01641 ; perimeter
G1 X101.342 Y103.673 E0.02148 ; perimeter
G1 X101.434 Y104.112 E0.02078 ; perimeter
G1 X101.138 Y104.272 F10800.000 ; move inwards before travel
G1 X100.996 Y104.322 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.353237
G1 F2400.000
G1 X101.030 Y104.098 E0.00585 ; infill
G1 X100.974 Y103.799 E0.00784 ; infill
;WIDTH:0.334197
G1 X100.934 Y103.670 E0.00327 ; infill
;WIDTH:0.294513
G1 X100.895 Y103.541 E0.00282 ; infill
;WIDTH:0.254829
G1 X100.826 Y103.375 E0.00316 ; infill
;WIDTH:0.234914
G1 X100.693 Y102.932 E0.00739 ; infill
;WIDTH:0.334983
G1 X100.586 Y102.402 E0.01313 ; infill
;WIDTH:0.324614
G1 X100.556 Y102.084 E0.00748 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.586 Y102.402 E-0.08427 ; wipe and retract
;WIPE_END
G1 E-2.31573 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X100.406 Y100.075 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X100.245 Y100.010 E0.00802 ; perimeter
G1 X100.091 Y99.915 E0.00836 ; perimeter
G1 X99.980 Y99.778 E0.00818 ; perimeter
G1 X99.919 Y99.546 E0.01110 ; perimeter
G1 X100.028 Y99.068 E0.02270 ; perimeter
G1 X100.184 Y98.816 E0.01374 ; perimeter
G1 X100.477 Y98.179 E0.03249 ; perimeter
G1 X100.697 Y97.069 E0.05243 ; perimeter
G1 X100.825 Y96.944 E0.00827 ; perimeter
G1 X100.883 Y96.854 E0.00499 ; perimeter
G1 X100.919 Y96.834 E0.00190 ; perimeter
G1 X101.215 Y96.792 E0.01383 ; perimeter
G1 X101.425 Y96.865 E0.01030 ; perimeter
G1 X101.481 Y96.920 E0.00364 ; perimeter
G1 X101.469 Y97.362 E0.02049 ; perimeter
G1 X101.272 Y97.850 E0.02434 ; perimeter
G1 X101.208 Y97.953 E0.00566 ; perimeter
G1 X100.981 Y98.649 E0.03391 ; perimeter
G1 X100.921 Y98.940 E0.01372 ; perimeter
G1 X100.787 Y99.339 E0.01952 ; perimeter
G1 X100.754 Y99.598 E0.01210 ; perimeter
G1 X100.698 Y99.792 E0.00933 ; perimeter
G1 X100.525 Y100.032 E0.01369 ; perimeter
G1 X100.462 Y100.054 E0.00312 ; perimeter
G1 X100.319 Y99.925 F10800.000 ; move inwards before travel
G1 X100.287 Y99.753 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.385355
G1 F2400.000
G1 X100.393 Y99.265 E0.01420 ; infill
;WIDTH:0.286253
G1 X100.615 Y98.707 E0.01216 ; infill
;WIDTH:0.183806
G1 X100.778 Y98.266 E0.00552 ; infill
;WIDTH:0.214327
G1 X100.835 Y98.043 E0.00328 ; infill
;WIDTH:0.251148
G1 X100.899 Y97.796 E0.00441 ; infill
;WIDTH:0.296397
G1 X100.943 Y97.682 E0.00257 ; infill
;WIDTH:0.332086
G1 X100.993 Y97.512 E0.00427 ; infill
;WIDTH:0.367776
G1 X101.042 Y97.341 E0.00480 ; infill
;WIDTH:0.375509
G1 X101.062 Y97.282 E0.00174 ; infill
G1 X101.218 Y97.048 E0.00777 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.062 Y97.282 E-0.07411 ; wipe and retract
G1 X101.042 Y97.341 E-0.01657 ; wipe and retract
;WIPE_END
G1 E-2.30932 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X103.108 Y95.449 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.356 Y95.159 E0.01767 ; perimeter
G1 X103.682 Y94.944 E0.01810 ; perimeter
G1 X104.112 Y94.797 E0.02105 ; perimeter
G1 X104.503 Y94.795 E0.01810 ; perimeter
G1 X104.541 Y94.826 E0.00225 ; perimeter
G1 X104.624 Y95.039 E0.01058 ; perimeter
G1 X104.560 Y95.404 E0.01718 ; perimeter
G1 X104.497 Y95.493 E0.00504 ; perimeter
G1 X104.232 Y95.646 E0.01419 ; perimeter
G1 X103.972 Y95.726 E0.01259 ; perimeter
G1 X103.477 Y95.701 E0.02299 ; perimeter
G1 X103.380 Y95.661 E0.00485 ; perimeter
G1 X103.197 Y95.627 E0.00862 ; perimeter
G1 X103.147 Y95.568 E0.00358 ; perimeter
G1 X103.127 Y95.505 E0.00304 ; perimeter
G1 X103.481 Y95.370 F10800.000 ; move inwards before travel
G1 X104.323 Y95.037 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.378174
G1 F2400.000
G1 X104.173 Y95.208 E0.00634 ; infill
G1 X104.063 Y95.258 E0.00337 ; infill
G1 X103.920 Y95.304 E0.00420 ; infill
G1 X103.496 Y95.364 E0.01193 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.920 Y95.304 E-0.11296 ; wipe and retract
G1 X104.063 Y95.258 E-0.03980 ; wipe and retract
G1 X104.173 Y95.208 E-0.03187 ; wipe and retract
G1 X104.323 Y95.037 E-0.06006 ; wipe and retract
;WIPE_END
G1 E-2.15533 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X106.273 Y95.266 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.206 Y95.062 E0.00996 ; perimeter
G1 X106.218 Y94.914 E0.00686 ; perimeter
G1 X106.262 Y94.843 E0.00388 ; perimeter
G1 X106.291 Y94.726 E0.00560 ; perimeter
G1 X106.415 Y94.637 E0.00706 ; perimeter
G1 X106.599 Y94.611 E0.00861 ; perimeter
G1 X106.914 Y94.690 E0.01504 ; perimeter
G1 X107.024 Y94.758 E0.00597 ; perimeter
G1 X107.103 Y94.874 E0.00651 ; perimeter
G1 X107.212 Y94.967 E0.00664 ; perimeter
G1 X107.277 Y95.171 E0.00993 ; perimeter
G1 X107.254 Y95.400 E0.01063 ; perimeter
G1 X107.193 Y95.455 E0.00381 ; perimeter
G1 X107.006 Y95.507 E0.00901 ; perimeter
G1 X106.689 Y95.497 E0.01468 ; perimeter
G1 X106.415 Y95.397 E0.01352 ; perimeter
G1 X106.317 Y95.307 E0.00618 ; perimeter
G1 X106.373 Y95.075 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X106.206 Y95.062 E-0.07099 ; wipe and retract
G1 X106.218 Y94.914 E-0.03908 ; wipe and retract
G1 X106.262 Y94.843 E-0.02210 ; wipe and retract
G1 X106.291 Y94.726 E-0.03188 ; wipe and retract
G1 X106.415 Y94.637 E-0.04023 ; wipe and retract
G1 X106.599 Y94.611 E-0.04905 ; wipe and retract
G1 X106.914 Y94.690 E-0.08565 ; wipe and retract
G1 X107.024 Y94.758 E-0.03404 ; wipe and retract
G1 X107.103 Y94.874 E-0.03707 ; wipe and retract
G1 X107.212 Y94.967 E-0.03783 ; wipe and retract
G1 X107.277 Y95.171 E-0.05658 ; wipe and retract
G1 X107.254 Y95.400 E-0.06054 ; wipe and retract
G1 X107.193 Y95.455 E-0.02173 ; wipe and retract
G1 X107.006 Y95.507 E-0.05135 ; wipe and retract
G1 X106.689 Y95.497 E-0.08361 ; wipe and retract
G1 X106.415 Y95.397 E-0.07700 ; wipe and retract
G1 X106.317 Y95.307 E-0.03518 ; wipe and retract
;WIPE_END
G1 E-1.56609 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X109.898 Y96.335 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.886 Y96.431 E0.00448 ; perimeter
G1 X109.851 Y96.470 E0.00244 ; perimeter
G1 X109.672 Y96.508 E0.00849 ; perimeter
G1 X109.362 Y96.407 E0.01508 ; perimeter
G1 X108.753 Y96.044 E0.03285 ; perimeter
G1 X108.504 Y95.928 E0.01272 ; perimeter
G1 X108.439 Y95.829 E0.00548 ; perimeter
G1 X108.310 Y95.714 E0.00802 ; perimeter
G1 X108.325 Y95.601 E0.00528 ; perimeter
G1 X108.496 Y95.475 E0.00985 ; perimeter
G1 X108.773 Y95.392 E0.01338 ; perimeter
G1 X109.105 Y95.360 E0.01547 ; perimeter
G1 X109.342 Y95.381 E0.01098 ; perimeter
G1 X109.565 Y95.453 E0.01088 ; perimeter
G1 X109.757 Y95.618 E0.01173 ; perimeter
G1 X109.775 Y95.658 E0.00204 ; perimeter
G1 X109.847 Y95.887 E0.01112 ; perimeter
G1 X109.890 Y96.275 E0.01808 ; perimeter
G1 X109.813 Y96.381 F10800.000 ; move inwards before travel
G1 X109.618 Y96.063 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.47496
G1 F2400.000
G1 X109.337 Y95.860 E0.01248 ; infill
G1 X109.257 Y95.823 E0.00316 ; infill
;WIDTH:0.455041
G1 X109.206 Y95.807 E0.00183 ; infill
;WIDTH:0.430252
G1 X108.745 Y95.659 E0.01560 ; infill
G1 X108.676 Y95.684 F10800.000 ; move to first infill point
;WIDTH:0.26906
G1 F2400.000
G1 X109.587 Y95.865 E0.01747 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.676 Y95.684 E-0.24516 ; wipe and retract
;WIPE_END
G1 E-2.15484 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 X111.218 Y97.600 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.342 Y97.538 E0.00641 ; perimeter
G1 X111.744 Y97.565 E0.01866 ; perimeter
G1 X111.889 Y97.600 E0.00689 ; perimeter
G1 X112.010 Y97.680 E0.00673 ; perimeter
G1 X112.367 Y98.118 E0.02620 ; perimeter
G1 X112.773 Y98.725 E0.03380 ; perimeter
G1 X113.134 Y99.403 E0.03559 ; perimeter
G1 X113.406 Y99.790 E0.02193 ; perimeter
G1 X113.525 Y100.004 E0.01132 ; perimeter
G1 X113.881 Y100.282 E0.02093 ; perimeter
G1 X113.993 Y100.427 E0.00847 ; perimeter
G1 X114.142 Y100.768 E0.01725 ; perimeter
G1 X114.150 Y100.974 E0.00956 ; perimeter
G1 X114.129 Y101.128 E0.00719 ; perimeter
G1 X114.050 Y101.282 E0.00800 ; perimeter
G1 X113.985 Y101.320 E0.00347 ; perimeter
G1 X113.764 Y101.331 E0.01025 ; perimeter
G1 X113.610 Y101.264 E0.00781 ; perimeter
G1 X113.506 Y101.172 E0.00641 ; perimeter
G1 X113.352 Y100.921 E0.01363 ; perimeter
G1 X113.264 Y100.639 E0.01371 ; perimeter
G1 X113.226 Y100.376 E0.01230 ; perimeter
G1 X113.119 Y100.151 E0.01154 ; perimeter
G1 X113.049 Y99.910 E0.01162 ; perimeter
G1 X112.845 Y99.774 E0.01135 ; perimeter
G1 X112.669 Y99.563 E0.01273 ; perimeter
G1 X112.511 Y99.444 E0.00915 ; perimeter
G1 X112.428 Y99.335 E0.00636 ; perimeter
G1 X111.736 Y98.644 E0.04530 ; perimeter
G1 X111.551 Y98.427 E0.01322 ; perimeter
G1 X111.324 Y98.267 E0.01282 ; perimeter
G1 X111.190 Y98.102 E0.00985 ; perimeter
G1 X111.094 Y97.834 E0.01319 ; perimeter
G1 X111.099 Y97.707 E0.00588 ; perimeter
G1 X111.174 Y97.640 E0.00466 ; perimeter
G1 X111.347 Y97.651 F10800.000 ; move inwards before travel
G1 X111.354 Y97.845 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.389502
G1 F2400.000
G1 X111.714 Y98.007 E0.01137 ; infill
G1 X111.846 Y98.135 E0.00529 ; infill
G1 X112.036 Y98.363 E0.00856 ; infill
;WIDTH:0.291471
G1 X112.478 Y98.901 E0.01440 ; infill
;WIDTH:0.158424
G1 X112.786 Y99.344 E0.00518 ; infill
G1 X113.465 Y100.263 F10800.000 ; move to first infill point
;WIDTH:0.285479
G1 F2400.000
G1 X113.796 Y100.956 E0.01549 ; infill
;WIDTH:0.267727
G1 X113.800 Y100.966 E0.00019 ; infill
;WIDTH:0.257842
G1 X113.811 Y100.988 E0.00044 ; infill
;WIDTH:0.228195
G1 X113.823 Y101.009 E0.00038 ; infill
;WIDTH:0.198548
G1 X113.854 Y101.042 E0.00059 ; infill
;WIDTH:0.166088
G1 X113.884 Y101.076 E0.00046 ; infill
G1 X113.881 Y101.083 F10800.000 ; move to first infill point
;WIDTH:0.343257
G1 F2400.000
G1 X113.711 Y100.758 E0.00916 ; infill
G1 X113.661 Y100.624 E0.00358 ; infill
;WIDTH:0.327807
G1 X113.626 Y100.557 E0.00179 ; infill
;WIDTH:0.300995
G1 X113.519 Y100.305 E0.00586 ; infill
;LAYER_CHANGE
;Z:24.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;24.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.626 Y100.557 E-0.07206 ; wipe and retract
;WIPE_END
G1 E-2.32794 F2400.000 ; retract
G1 Z24.075 F10800.000 ; lift Z
G1 Z24.200 ; move to next layer (120)
;AFTER_LAYER_CHANGE
;24.2
G1 Z24.275 ; lift Z
G1 X104.161 Y106.733 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.261 Y106.966 E0.01176 ; perimeter
G1 X104.209 Y107.194 E0.01083 ; perimeter
G1 X104.024 Y107.330 E0.01063 ; perimeter
G1 X103.852 Y107.362 E0.00811 ; perimeter
G1 X103.542 Y107.309 E0.01459 ; perimeter
G1 X103.353 Y107.205 E0.00998 ; perimeter
G1 X103.246 Y107.081 E0.00757 ; perimeter
G1 X103.192 Y106.935 E0.00723 ; perimeter
G1 X103.197 Y106.782 E0.00708 ; perimeter
G1 X103.261 Y106.649 E0.00683 ; perimeter
G1 X103.414 Y106.557 E0.00826 ; perimeter
G1 X103.626 Y106.517 E0.01001 ; perimeter
G1 X103.747 Y106.526 E0.00561 ; perimeter
G1 X103.918 Y106.569 E0.00816 ; perimeter
G1 X104.112 Y106.699 E0.01082 ; perimeter
G1 X104.061 Y106.966 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.261 Y106.966 E-0.08074 ; wipe and retract
G1 X104.209 Y107.194 E-0.06170 ; wipe and retract
G1 X104.024 Y107.330 E-0.06055 ; wipe and retract
G1 X103.852 Y107.362 E-0.04619 ; wipe and retract
G1 X103.542 Y107.309 E-0.08310 ; wipe and retract
G1 X103.353 Y107.205 E-0.05686 ; wipe and retract
G1 X103.246 Y107.081 E-0.04313 ; wipe and retract
G1 X103.192 Y106.935 E-0.04120 ; wipe and retract
G1 X103.197 Y106.782 E-0.04032 ; wipe and retract
G1 X103.261 Y106.649 E-0.03892 ; wipe and retract
G1 X103.414 Y106.557 E-0.04707 ; wipe and retract
G1 X103.626 Y106.517 E-0.05701 ; wipe and retract
G1 X103.747 Y106.526 E-0.03193 ; wipe and retract
G1 X103.918 Y106.569 E-0.04649 ; wipe and retract
G1 X104.112 Y106.699 E-0.06163 ; wipe and retract
;WIPE_END
G1 E-1.60318 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X107.743 Y109.353 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.891 Y109.305 E0.00719 ; perimeter
G1 X108.097 Y109.327 E0.00962 ; perimeter
G1 X108.283 Y109.466 E0.01074 ; perimeter
G1 X108.365 Y109.637 E0.00880 ; perimeter
G1 X108.343 Y109.744 E0.00506 ; perimeter
G1 X108.345 Y109.910 E0.00766 ; perimeter
G1 X108.272 Y110.039 E0.00690 ; perimeter
G1 X108.091 Y110.153 E0.00987 ; perimeter
G1 X107.942 Y110.153 E0.00690 ; perimeter
G1 X107.748 Y110.095 E0.00941 ; perimeter
G1 X107.596 Y109.985 E0.00869 ; perimeter
G1 X107.511 Y109.637 E0.01657 ; perimeter
G1 X107.621 Y109.447 E0.01018 ; perimeter
G1 X107.696 Y109.390 E0.00435 ; perimeter
G1 X107.876 Y109.433 F10800.000 ; move inwards before travel
G1 X107.941 Y109.717 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.364676
G1 F2400.000
G1 X107.928 Y109.705 E0.00046 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.941 Y109.717 E-0.00458 ; wipe and retract
;WIPE_END
G1 E-2.39542 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X113.640 Y114.593 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.882 Y114.541 E0.01146 ; perimeter
G1 X114.131 Y114.591 E0.01175 ; perimeter
G1 X114.408 Y114.719 E0.01415 ; perimeter
G1 X114.740 Y114.766 E0.01552 ; perimeter
G1 X115.202 Y114.664 E0.02191 ; perimeter
G1 X115.444 Y114.669 E0.01121 ; perimeter
G1 X115.577 Y114.741 E0.00700 ; perimeter
G1 X115.691 Y114.903 E0.00920 ; perimeter
G1 X115.704 Y115.139 E0.01092 ; perimeter
G1 X115.634 Y115.296 E0.00799 ; perimeter
G1 X115.570 Y115.366 E0.00436 ; perimeter
G1 X115.463 Y115.423 E0.00565 ; perimeter
G1 X115.302 Y115.453 E0.00757 ; perimeter
G1 X115.105 Y115.411 E0.00934 ; perimeter
G1 X114.821 Y115.275 E0.01458 ; perimeter
G1 X114.550 Y115.231 E0.01269 ; perimeter
G1 X114.405 Y115.225 E0.00675 ; perimeter
G1 X114.121 Y115.303 E0.01362 ; perimeter
G1 X113.765 Y115.339 E0.01656 ; perimeter
G1 X113.616 Y115.305 E0.00709 ; perimeter
G1 X113.519 Y115.244 E0.00531 ; perimeter
G1 X113.456 Y115.169 E0.00457 ; perimeter
G1 X113.405 Y114.992 E0.00851 ; perimeter
G1 X113.417 Y114.866 E0.00586 ; perimeter
G1 X113.471 Y114.742 E0.00624 ; perimeter
G1 X113.590 Y114.625 E0.00772 ; perimeter
G1 X113.843 Y114.735 F10800.000 ; move inwards before travel
G1 X115.457 Y115.036 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.112997
G1 F2400.000
G1 X114.842 Y115.012 E0.00358 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.457 Y115.036 E-0.16223 ; wipe and retract
;WIPE_END
G1 E-2.23777 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X112.679 Y112.932 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.556 Y113.042 E0.00766 ; perimeter
G1 X112.370 Y113.092 E0.00892 ; perimeter
G1 X112.147 Y113.074 E0.01034 ; perimeter
G1 X111.980 Y113.009 E0.00829 ; perimeter
G1 X111.816 Y112.861 E0.01023 ; perimeter
G1 X111.694 Y112.692 E0.00965 ; perimeter
G1 X111.676 Y112.389 E0.01406 ; perimeter
G1 X111.774 Y112.282 E0.00675 ; perimeter
G1 X111.925 Y112.218 E0.00757 ; perimeter
G1 X112.201 Y112.219 E0.01276 ; perimeter
G1 X112.460 Y112.318 E0.01289 ; perimeter
G1 X112.615 Y112.447 E0.00931 ; perimeter
G1 X112.731 Y112.630 E0.01004 ; perimeter
G1 X112.735 Y112.797 E0.00772 ; perimeter
G1 X112.702 Y112.877 E0.00398 ; perimeter
G1 X112.514 Y112.916 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.556 Y113.042 E-0.05829 ; wipe and retract
G1 X112.370 Y113.092 E-0.05083 ; wipe and retract
G1 X112.147 Y113.074 E-0.05891 ; wipe and retract
G1 X111.980 Y113.009 E-0.04725 ; wipe and retract
G1 X111.816 Y112.861 E-0.05827 ; wipe and retract
G1 X111.694 Y112.692 E-0.05496 ; wipe and retract
G1 X111.676 Y112.389 E-0.08011 ; wipe and retract
G1 X111.774 Y112.282 E-0.03848 ; wipe and retract
G1 X111.925 Y112.218 E-0.04312 ; wipe and retract
G1 X112.201 Y112.219 E-0.07272 ; wipe and retract
G1 X112.460 Y112.318 E-0.07342 ; wipe and retract
G1 X112.615 Y112.447 E-0.05304 ; wipe and retract
G1 X112.731 Y112.630 E-0.05722 ; wipe and retract
G1 X112.735 Y112.797 E-0.04399 ; wipe and retract
G1 X112.702 Y112.877 E-0.02267 ; wipe and retract
;WIPE_END
G1 E-1.58672 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X115.209 Y111.064 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.188 Y111.024 E0.00210 ; perimeter
G1 X115.160 Y110.777 E0.01152 ; perimeter
G1 X115.166 Y110.662 E0.00529 ; perimeter
G1 X115.238 Y110.479 E0.00912 ; perimeter
G1 X115.312 Y110.371 E0.00607 ; perimeter
G1 X115.489 Y110.299 E0.00883 ; perimeter
G1 X115.560 Y110.329 E0.00357 ; perimeter
G1 X115.703 Y110.343 E0.00668 ; perimeter
G1 X115.775 Y110.421 E0.00489 ; perimeter
G1 X115.881 Y110.815 E0.01893 ; perimeter
G1 X115.864 Y110.961 E0.00679 ; perimeter
G1 X115.809 Y111.119 E0.00774 ; perimeter
G1 X115.694 Y111.234 E0.00755 ; perimeter
G1 X115.524 Y111.268 E0.00803 ; perimeter
G1 X115.427 Y111.263 E0.00452 ; perimeter
G1 X115.313 Y111.208 E0.00583 ; perimeter
G1 X115.244 Y111.112 E0.00547 ; perimeter
G1 X115.228 Y111.023 F10800.000 ; move inwards before travel
G1 X115.480 Y111.021 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.140121
G1 F2400.000
G1 X115.504 Y110.977 E0.00040 ; infill
;WIDTH:0.184014
G1 X115.513 Y110.953 E0.00031 ; infill
;WIDTH:0.227908
G1 X115.523 Y110.928 E0.00040 ; infill
;WIDTH:0.246428
G1 X115.520 Y110.909 E0.00034 ; infill
;WIDTH:0.253941
G1 X115.523 Y110.567 E0.00599 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.520 Y110.909 E-0.09008 ; wipe and retract
;WIPE_END
G1 E-2.30992 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X115.681 Y106.147 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.581 Y106.190 E0.00504 ; perimeter
G1 X115.328 Y106.178 E0.01173 ; perimeter
G1 X115.256 Y106.149 E0.00359 ; perimeter
G1 X115.199 Y106.100 E0.00352 ; perimeter
G1 X115.090 Y105.945 E0.00876 ; perimeter
G1 X115.057 Y105.829 E0.00560 ; perimeter
G1 X115.066 Y105.636 E0.00895 ; perimeter
G1 X115.121 Y105.519 E0.00599 ; perimeter
G1 X115.290 Y105.355 E0.01091 ; perimeter
G1 X115.392 Y105.320 E0.00497 ; perimeter
G1 X115.514 Y105.320 E0.00566 ; perimeter
G1 X115.650 Y105.372 E0.00676 ; perimeter
G1 X115.787 Y105.501 E0.00868 ; perimeter
G1 X115.846 Y105.689 E0.00913 ; perimeter
G1 X115.844 Y105.881 E0.00889 ; perimeter
G1 X115.766 Y106.065 E0.00929 ; perimeter
G1 X115.725 Y106.105 E0.00268 ; perimeter
G1 X115.583 Y106.101 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.581 Y106.190 E-0.04387 ; wipe and retract
G1 X115.328 Y106.178 E-0.06682 ; wipe and retract
G1 X115.256 Y106.149 E-0.02044 ; wipe and retract
G1 X115.199 Y106.100 E-0.02003 ; wipe and retract
G1 X115.090 Y105.945 E-0.04989 ; wipe and retract
G1 X115.057 Y105.829 E-0.03192 ; wipe and retract
G1 X115.066 Y105.636 E-0.05098 ; wipe and retract
G1 X115.121 Y105.519 E-0.03410 ; wipe and retract
G1 X115.290 Y105.355 E-0.06215 ; wipe and retract
G1 X115.392 Y105.320 E-0.02830 ; wipe and retract
G1 X115.514 Y105.320 E-0.03224 ; wipe and retract
G1 X115.650 Y105.372 E-0.03852 ; wipe and retract
G1 X115.787 Y105.501 E-0.04946 ; wipe and retract
G1 X115.846 Y105.689 E-0.05203 ; wipe and retract
G1 X115.844 Y105.881 E-0.05063 ; wipe and retract
G1 X115.766 Y106.065 E-0.05292 ; wipe and retract
G1 X115.725 Y106.105 E-0.01524 ; wipe and retract
;WIPE_END
G1 E-1.70046 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X114.042 Y101.488 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.820 Y101.494 E0.01029 ; perimeter
G1 X113.656 Y101.408 E0.00858 ; perimeter
G1 X113.567 Y101.322 E0.00572 ; perimeter
G1 X113.437 Y101.100 E0.01194 ; perimeter
G1 X113.340 Y100.702 E0.01895 ; perimeter
G1 X113.383 Y100.533 E0.00810 ; perimeter
G1 X113.361 Y100.429 E0.00492 ; perimeter
G1 X113.432 Y100.253 E0.00877 ; perimeter
G1 X113.458 Y100.277 E0.00162 ; perimeter
G1 X113.738 Y100.318 E0.01310 ; perimeter
G1 X113.964 Y100.472 E0.01266 ; perimeter
G1 X114.059 Y100.588 E0.00697 ; perimeter
G1 X114.194 Y100.892 E0.01541 ; perimeter
G1 X114.208 Y100.968 E0.00355 ; perimeter
G1 X114.178 Y101.321 E0.01641 ; perimeter
G1 X114.093 Y101.456 E0.00740 ; perimeter
G1 X113.859 Y101.361 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.820 Y101.494 E-0.07267 ; wipe and retract
G1 X113.656 Y101.408 E-0.04887 ; wipe and retract
G1 X113.567 Y101.322 E-0.03256 ; wipe and retract
G1 X113.437 Y101.100 E-0.06803 ; wipe and retract
G1 X113.340 Y100.702 E-0.10797 ; wipe and retract
G1 X113.383 Y100.533 E-0.04613 ; wipe and retract
G1 X113.361 Y100.429 E-0.02805 ; wipe and retract
G1 X113.432 Y100.253 E-0.04994 ; wipe and retract
G1 X113.458 Y100.277 E-0.00922 ; wipe and retract
G1 X113.738 Y100.318 E-0.07462 ; wipe and retract
G1 X113.964 Y100.472 E-0.07210 ; wipe and retract
G1 X114.059 Y100.588 E-0.03973 ; wipe and retract
G1 X114.194 Y100.892 E-0.08778 ; wipe and retract
G1 X114.208 Y100.968 E-0.02024 ; wipe and retract
G1 X114.178 Y101.321 E-0.09351 ; wipe and retract
G1 X114.093 Y101.456 E-0.04216 ; wipe and retract
;WIPE_END
G1 E-1.50640 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X112.966 Y99.528 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.704 Y99.332 E0.01516 ; perimeter
G1 X112.626 Y99.321 E0.00368 ; perimeter
G1 X112.404 Y99.129 E0.01358 ; perimeter
G1 X112.223 Y98.923 E0.01272 ; perimeter
G1 X111.142 Y98.165 E0.06115 ; perimeter
G1 X110.981 Y97.971 E0.01164 ; perimeter
G1 X110.910 Y97.803 E0.00848 ; perimeter
G1 X110.903 Y97.641 E0.00748 ; perimeter
G1 X110.962 Y97.492 E0.00745 ; perimeter
G1 X111.276 Y97.457 E0.01460 ; perimeter
G1 X111.805 Y97.603 E0.02545 ; perimeter
G1 X111.959 Y97.716 E0.00885 ; perimeter
G1 X112.284 Y98.125 E0.02419 ; perimeter
G1 X112.751 Y98.960 E0.04432 ; perimeter
G1 X112.797 Y99.118 E0.00761 ; perimeter
G1 X112.952 Y99.470 E0.01780 ; perimeter
G1 X112.746 Y99.286 F10800.000 ; move inwards before travel
G1 X112.265 Y98.585 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.31404
G1 F2400.000
G1 X111.666 Y98.021 E0.01856 ; infill
G1 X111.157 Y97.769 E0.01279 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.666 Y98.021 E-0.14976 ; wipe and retract
G1 X112.265 Y98.585 E-0.21723 ; wipe and retract
;WIPE_END
G1 E-2.03300 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X113.635 Y100.539 ; move to first infill point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.260918
G1 F2400.000
G1 X113.901 Y101.254 E0.01383 ; infill
G1 X113.943 Y101.235 F10800.000 ; move to first infill point
;WIDTH:0.333316
G1 F2400.000
G1 X113.798 Y100.953 E0.00766 ; infill
G1 X113.741 Y100.784 E0.00431 ; infill
;WIDTH:0.301626
G1 X113.719 Y100.740 E0.00107 ; infill
;WIDTH:0.279452
G1 X113.616 Y100.591 E0.00355 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.719 Y100.740 E-0.04760 ; wipe and retract
;WIPE_END
G1 E-2.35240 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X106.247 Y94.894 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.279 Y94.836 E0.00306 ; perimeter
G1 X106.487 Y94.716 E0.01113 ; perimeter
G1 X106.738 Y94.681 E0.01176 ; perimeter
G1 X106.991 Y94.749 E0.01214 ; perimeter
G1 X107.137 Y94.838 E0.00790 ; perimeter
G1 X107.354 Y95.031 E0.01344 ; perimeter
G1 X107.401 Y95.180 E0.00727 ; perimeter
G1 X107.766 Y95.342 E0.01846 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.821 Y95.367 E0.00253 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.943 Y95.421 E0.00620 ; perimeter
G1 X108.425 Y95.364 E0.02248 ; perimeter
G1 X108.723 Y95.371 E0.01381 ; perimeter
G1 X108.895 Y95.353 E0.00802 ; perimeter
G1 X109.200 Y95.383 E0.01421 ; perimeter
G1 X109.407 Y95.450 E0.01009 ; perimeter
G1 X109.594 Y95.558 E0.00995 ; perimeter
G1 X109.739 Y95.695 E0.00926 ; perimeter
G1 X110.029 Y96.275 E0.03007 ; perimeter
G1 X110.023 Y96.457 E0.00839 ; perimeter
G1 X110.063 Y96.702 E0.01152 ; perimeter
G1 X110.035 Y96.766 E0.00323 ; perimeter
G1 X109.892 Y96.774 E0.00662 ; perimeter
G1 X109.694 Y96.706 E0.00970 ; perimeter
G1 X109.582 Y96.598 E0.00723 ; perimeter
G1 X109.444 Y96.556 E0.00665 ; perimeter
G1 X109.315 Y96.431 E0.00834 ; perimeter
G1 X109.149 Y96.342 E0.00875 ; perimeter
G1 X108.875 Y96.149 E0.01550 ; perimeter
G1 X108.283 Y95.912 E0.02955 ; perimeter
G1 X108.151 Y95.881 E0.00626 ; perimeter
G1 X108.041 Y95.792 E0.00657 ; perimeter
G1 X107.985 Y95.694 E0.00520 ; perimeter
G1 X107.791 Y95.647 E0.00923 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.732 Y95.633 E0.00254 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X107.436 Y95.562 E0.01410 ; perimeter
G1 X107.339 Y95.614 E0.00514 ; perimeter
G1 X106.953 Y95.621 E0.01788 ; perimeter
G1 X106.656 Y95.542 E0.01420 ; perimeter
G1 X106.396 Y95.446 E0.01287 ; perimeter
G1 X106.260 Y95.318 E0.00862 ; perimeter
G1 X106.205 Y95.087 E0.01102 ; perimeter
G1 X106.234 Y94.952 E0.00638 ; perimeter
G1 X106.311 Y94.881 F10800.000 ; move inwards before travel
G1 X106.466 Y95.019 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.32839
G1 F2400.000
G1 X107.191 Y95.313 E0.01856 ; infill
G1 X107.187 Y95.301 F10800.000 ; move to first infill point
;WIDTH:0.413487
G1 F2400.000
G1 X106.822 Y95.145 E0.01225 ; infill
G1 X106.463 Y95.033 E0.01158 ; infill
G1 X108.371 Y95.613 F10800.000 ; move to first infill point
;WIDTH:0.379664
G1 F2400.000
G1 X109.053 Y95.780 E0.01967 ; infill
;WIDTH:0.395836
G1 X109.092 Y95.792 E0.00119 ; infill
;WIDTH:0.407042
G1 X109.113 Y95.799 E0.00067 ; infill
;WIDTH:0.445292
G1 X109.378 Y95.963 E0.01043 ; infill
G1 X109.783 Y96.433 E0.02076 ; infill
G1 X109.771 Y96.445 F10800.000 ; move to first infill point
;WIDTH:0.30094
G1 F2400.000
G1 X109.548 Y96.141 E0.00807 ; infill
G1 X109.102 Y95.615 E0.01480 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.548 Y96.141 E-0.18203 ; wipe and retract
G1 X109.771 Y96.445 E-0.09929 ; wipe and retract
;WIPE_END
G1 E-2.11868 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X104.634 Y95.353 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.520 Y95.522 E0.00943 ; perimeter
G1 X104.262 Y95.664 E0.01363 ; perimeter
G1 X104.175 Y95.691 E0.00423 ; perimeter
G1 X103.489 Y95.630 E0.03190 ; perimeter
G1 X103.385 Y95.547 E0.00618 ; perimeter
G1 X103.378 Y95.376 E0.00792 ; perimeter
G1 X103.515 Y95.126 E0.01318 ; perimeter
G1 X103.769 Y94.934 E0.01480 ; perimeter
G1 X104.033 Y94.833 E0.01309 ; perimeter
G1 X104.191 Y94.817 E0.00734 ; perimeter
G1 X104.478 Y94.857 E0.01342 ; perimeter
G1 X104.563 Y94.921 E0.00493 ; perimeter
G1 X104.641 Y95.090 E0.00861 ; perimeter
G1 X104.633 Y95.293 E0.00944 ; perimeter
G1 X104.434 Y95.390 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.520 Y95.522 E-0.06725 ; wipe and retract
G1 X104.262 Y95.664 E-0.07767 ; wipe and retract
G1 X104.175 Y95.691 E-0.02408 ; wipe and retract
G1 X103.489 Y95.630 E-0.18175 ; wipe and retract
G1 X103.385 Y95.547 E-0.03521 ; wipe and retract
G1 X103.378 Y95.376 E-0.04511 ; wipe and retract
G1 X103.515 Y95.126 E-0.07508 ; wipe and retract
G1 X103.769 Y94.934 E-0.08430 ; wipe and retract
G1 X104.033 Y94.833 E-0.07455 ; wipe and retract
G1 X104.191 Y94.817 E-0.04180 ; wipe and retract
G1 X104.478 Y94.857 E-0.07646 ; wipe and retract
G1 X104.563 Y94.921 E-0.02811 ; wipe and retract
G1 X104.641 Y95.090 E-0.04906 ; wipe and retract
G1 X104.633 Y95.293 E-0.05376 ; wipe and retract
;WIPE_END
G1 E-1.48581 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X101.436 Y104.120 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.369 Y104.238 E0.00630 ; perimeter
G1 X101.213 Y104.402 E0.01049 ; perimeter
G1 X100.970 Y104.441 E0.01140 ; perimeter
G1 X100.771 Y104.329 E0.01061 ; perimeter
G1 X100.673 Y104.164 E0.00890 ; perimeter
G1 X100.612 Y104.012 E0.00756 ; perimeter
G1 X100.563 Y103.697 E0.01477 ; perimeter
G1 X100.232 Y102.731 E0.04733 ; perimeter
G1 X100.191 Y102.239 E0.02284 ; perimeter
G1 X100.247 Y101.873 E0.01714 ; perimeter
G1 X100.315 Y101.619 E0.01222 ; perimeter
G1 X100.494 Y101.355 E0.01477 ; perimeter
G1 X100.571 Y101.170 E0.00930 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.584 Y101.170 E0.00054 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.788 Y101.487 E0.01743 ; perimeter
G1 X100.932 Y101.867 E0.01884 ; perimeter
G1 X101.104 Y102.805 E0.04416 ; perimeter
G1 X101.208 Y103.173 E0.01772 ; perimeter
G1 X101.396 Y103.586 E0.02103 ; perimeter
G1 X101.448 Y103.889 E0.01423 ; perimeter
G1 X101.440 Y104.060 E0.00794 ; perimeter
G1 X101.303 Y104.148 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.369 Y104.238 E-0.05054 ; wipe and retract
G1 X101.213 Y104.402 E-0.05979 ; wipe and retract
G1 X100.970 Y104.441 E-0.06496 ; wipe and retract
G1 X100.771 Y104.329 E-0.06044 ; wipe and retract
G1 X100.673 Y104.164 E-0.05071 ; wipe and retract
G1 X100.612 Y104.012 E-0.04307 ; wipe and retract
G1 X100.563 Y103.697 E-0.08417 ; wipe and retract
G1 X100.232 Y102.731 E-0.26962 ; wipe and retract
G1 X100.191 Y102.239 E-0.13010 ; wipe and retract
G1 X100.247 Y101.873 E-0.09767 ; wipe and retract
G1 X100.315 Y101.619 E-0.06959 ; wipe and retract
G1 X100.494 Y101.355 E-0.08413 ; wipe and retract
G1 X100.571 Y101.170 E-0.05299 ; wipe and retract
;WIPE_END
G1 E-1.28221 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X100.570 Y100.216 ; move to first perimeter point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.565 Y100.270 E0.00248 ; perimeter
G1 X100.526 Y100.290 E0.00203 ; perimeter
G1 X100.314 Y100.190 E0.01085 ; perimeter
G1 X100.160 Y100.020 E0.01060 ; perimeter
G1 X100.008 Y99.807 E0.01214 ; perimeter
G1 X99.949 Y99.542 E0.01258 ; perimeter
G1 X99.991 Y99.282 E0.01221 ; perimeter
G1 X100.104 Y98.898 E0.01853 ; perimeter
G1 X100.485 Y97.950 E0.04732 ; perimeter
G1 X100.553 Y97.617 E0.01571 ; perimeter
G1 X100.729 Y97.049 E0.02756 ; perimeter
G1 X100.923 Y96.854 E0.01271 ; perimeter
G1 X101.126 Y96.758 E0.01044 ; perimeter
G1 X101.251 Y96.754 E0.00578 ; perimeter
G1 X101.398 Y96.709 E0.00712 ; perimeter
G1 X101.506 Y96.760 E0.00553 ; perimeter
G1 X101.555 Y97.018 E0.01217 ; perimeter
G1 X101.512 Y97.359 E0.01589 ; perimeter
G1 X101.204 Y98.154 E0.03953 ; perimeter
G1 X100.846 Y99.171 E0.04995 ; perimeter
G1 X100.719 Y100.010 E0.03928 ; perimeter
G1 X100.605 Y100.168 E0.00903 ; perimeter
G1 X100.520 Y100.236 F10800.000 ; move inwards before travel
G1 X100.385 Y99.894 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310856
G1 F2400.000
G1 X100.371 Y99.520 E0.00834 ; infill
G1 X100.459 Y99.090 E0.00978 ; infill
G1 X100.853 Y98.022 E0.02535 ; infill
;WIDTH:0.337722
G1 X100.898 Y97.870 E0.00390 ; infill
;WIDTH:0.364591
G1 X100.942 Y97.717 E0.00425 ; infill
;WIDTH:0.39673
G1 X101.098 Y97.271 E0.01391 ; infill
G1 X101.278 Y96.994 E0.00972 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.098 Y97.271 E-0.08715 ; wipe and retract
G1 X100.942 Y97.717 E-0.12475 ; wipe and retract
;WIPE_END
G1 E-2.18810 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 X100.561 Y101.685 ; move to first infill point
G1 Z24.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.266647
G1 F2400.000
G1 X100.590 Y101.962 E0.00519 ; infill
;WIDTH:0.314934
G1 X100.592 Y102.108 E0.00329 ; infill
;WIDTH:0.341131
G1 X100.647 Y102.644 E0.01336 ; infill
G1 X100.846 Y103.318 E0.01743 ; infill
;WIDTH:0.374652
G1 X100.962 Y103.614 E0.00878 ; infill
;WIDTH:0.405752
G1 X101.099 Y104.172 E0.01733 ; infill
;LAYER_CHANGE
;Z:24.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;24.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.962 Y103.614 E-0.15161 ; wipe and retract
;WIPE_END
G1 E-2.24839 F2400.000 ; retract
G1 Z24.275 F10800.000 ; lift Z
G1 Z24.400 ; move to next layer (121)
;AFTER_LAYER_CHANGE
;24.4
G1 Z24.475 ; lift Z
G1 X104.289 Y107.328 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.246 Y107.359 E0.00245 ; perimeter
G1 X104.012 Y107.401 E0.01102 ; perimeter
G1 X103.663 Y107.342 E0.01639 ; perimeter
G1 X103.498 Y107.252 E0.00873 ; perimeter
G1 X103.400 Y107.153 E0.00644 ; perimeter
G1 X103.312 Y106.919 E0.01158 ; perimeter
G1 X103.320 Y106.813 E0.00493 ; perimeter
G1 X103.388 Y106.692 E0.00645 ; perimeter
G1 X103.522 Y106.595 E0.00762 ; perimeter
G1 X103.716 Y106.551 E0.00922 ; perimeter
G1 X103.901 Y106.562 E0.00862 ; perimeter
G1 X104.057 Y106.605 E0.00746 ; perimeter
G1 X104.284 Y106.761 E0.01278 ; perimeter
G1 X104.429 Y107.044 E0.01473 ; perimeter
G1 X104.411 Y107.203 E0.00742 ; perimeter
G1 X104.331 Y107.285 E0.00531 ; perimeter
G1 X104.238 Y107.315 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.246 Y107.359 E-0.02970 ; wipe and retract
G1 X104.012 Y107.401 E-0.06276 ; wipe and retract
G1 X103.663 Y107.342 E-0.09336 ; wipe and retract
G1 X103.498 Y107.252 E-0.04975 ; wipe and retract
G1 X103.400 Y107.153 E-0.03669 ; wipe and retract
G1 X103.312 Y106.919 E-0.06595 ; wipe and retract
G1 X103.320 Y106.813 E-0.02811 ; wipe and retract
G1 X103.388 Y106.692 E-0.03676 ; wipe and retract
G1 X103.522 Y106.595 E-0.04343 ; wipe and retract
G1 X103.716 Y106.551 E-0.05250 ; wipe and retract
G1 X103.901 Y106.562 E-0.04911 ; wipe and retract
G1 X104.057 Y106.605 E-0.04250 ; wipe and retract
G1 X104.284 Y106.761 E-0.07278 ; wipe and retract
G1 X104.429 Y107.044 E-0.08390 ; wipe and retract
G1 X104.411 Y107.203 E-0.04227 ; wipe and retract
G1 X104.331 Y107.285 E-0.03025 ; wipe and retract
;WIPE_END
G1 E-1.58017 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X107.634 Y109.422 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.781 Y109.309 E0.00859 ; perimeter
G1 X107.958 Y109.271 E0.00840 ; perimeter
G1 X108.091 Y109.282 E0.00617 ; perimeter
G1 X108.148 Y109.306 E0.00286 ; perimeter
G1 X108.302 Y109.428 E0.00910 ; perimeter
G1 X108.372 Y109.579 E0.00771 ; perimeter
G1 X108.327 Y109.881 E0.01412 ; perimeter
G1 X108.225 Y110.015 E0.00781 ; perimeter
G1 X108.079 Y110.089 E0.00758 ; perimeter
G1 X107.949 Y110.094 E0.00605 ; perimeter
G1 X107.749 Y110.040 E0.00958 ; perimeter
G1 X107.604 Y109.927 E0.00854 ; perimeter
G1 X107.592 Y109.890 E0.00180 ; perimeter
G1 X107.564 Y109.590 E0.01394 ; perimeter
G1 X107.611 Y109.477 E0.00567 ; perimeter
G1 X107.818 Y109.444 F10800.000 ; move inwards before travel
G1 X107.965 Y109.671 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.345738
G1 F2400.000
G1 X107.977 Y109.714 E0.00111 ; infill
;WIDTH:0.309135
G1 X107.989 Y109.733 E0.00050 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.977 Y109.714 E-0.00592 ; wipe and retract
;WIPE_END
G1 E-2.39408 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X113.605 Y115.236 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.533 Y115.153 E0.00507 ; perimeter
G1 X113.482 Y114.968 E0.00889 ; perimeter
G1 X113.496 Y114.845 E0.00575 ; perimeter
G1 X113.559 Y114.707 E0.00699 ; perimeter
G1 X113.623 Y114.636 E0.00443 ; perimeter
G1 X113.731 Y114.569 E0.00587 ; perimeter
G1 X113.954 Y114.519 E0.01063 ; perimeter
G1 X114.199 Y114.567 E0.01155 ; perimeter
G1 X114.402 Y114.661 E0.01034 ; perimeter
G1 X114.833 Y114.710 E0.02010 ; perimeter
G1 X115.178 Y114.651 E0.01620 ; perimeter
G1 X115.442 Y114.661 E0.01225 ; perimeter
G1 X115.572 Y114.732 E0.00687 ; perimeter
G1 X115.703 Y114.916 E0.01046 ; perimeter
G1 X115.719 Y115.025 E0.00513 ; perimeter
G1 X115.713 Y115.120 E0.00439 ; perimeter
G1 X115.634 Y115.292 E0.00877 ; perimeter
G1 X115.570 Y115.360 E0.00434 ; perimeter
G1 X115.473 Y115.410 E0.00505 ; perimeter
G1 X115.299 Y115.442 E0.00821 ; perimeter
G1 X115.116 Y115.404 E0.00866 ; perimeter
G1 X114.959 Y115.323 E0.00815 ; perimeter
G1 X114.658 Y115.248 E0.01438 ; perimeter
G1 X114.436 Y115.238 E0.01028 ; perimeter
G1 X114.260 Y115.286 E0.00846 ; perimeter
G1 X113.873 Y115.327 E0.01803 ; perimeter
G1 X113.700 Y115.295 E0.00815 ; perimeter
G1 X113.656 Y115.267 E0.00240 ; perimeter
G1 X113.622 Y115.128 F10800.000 ; move inwards before travel
G1 X113.726 Y114.952 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.114243
G1 F2400.000
G1 X114.411 Y114.950 E0.00406 ; infill
G1 X114.701 Y114.974 E0.00173 ; infill
;WIDTH:0.135305
G1 X115.472 Y115.067 E0.00596 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.701 Y114.974 E-0.20489 ; wipe and retract
;WIPE_END
G1 E-2.19511 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X112.790 Y112.992 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.693 Y113.079 E0.00604 ; perimeter
G1 X112.500 Y113.131 E0.00923 ; perimeter
G1 X112.183 Y113.091 E0.01480 ; perimeter
G1 X112.097 Y113.053 E0.00436 ; perimeter
G1 X111.949 Y112.925 E0.00908 ; perimeter
G1 X111.823 Y112.724 E0.01099 ; perimeter
G1 X111.808 Y112.666 E0.00277 ; perimeter
G1 X111.855 Y112.430 E0.01115 ; perimeter
G1 X111.952 Y112.318 E0.00685 ; perimeter
G1 X112.031 Y112.285 E0.00398 ; perimeter
G1 X112.221 Y112.272 E0.00881 ; perimeter
G1 X112.325 Y112.280 E0.00485 ; perimeter
G1 X112.612 Y112.391 E0.01427 ; perimeter
G1 X112.713 Y112.478 E0.00615 ; perimeter
G1 X112.838 Y112.665 E0.01042 ; perimeter
G1 X112.855 Y112.827 E0.00756 ; perimeter
G1 X112.812 Y112.936 E0.00543 ; perimeter
G1 X112.660 Y112.981 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.693 Y113.079 E-0.04910 ; wipe and retract
G1 X112.500 Y113.131 E-0.05260 ; wipe and retract
G1 X112.183 Y113.091 E-0.08432 ; wipe and retract
G1 X112.097 Y113.053 E-0.02481 ; wipe and retract
G1 X111.949 Y112.925 E-0.05170 ; wipe and retract
G1 X111.823 Y112.724 E-0.06260 ; wipe and retract
G1 X111.808 Y112.666 E-0.01579 ; wipe and retract
G1 X111.855 Y112.430 E-0.06353 ; wipe and retract
G1 X111.952 Y112.318 E-0.03901 ; wipe and retract
G1 X112.031 Y112.285 E-0.02266 ; wipe and retract
G1 X112.221 Y112.272 E-0.05018 ; wipe and retract
G1 X112.325 Y112.280 E-0.02763 ; wipe and retract
G1 X112.612 Y112.391 E-0.08130 ; wipe and retract
G1 X112.713 Y112.478 E-0.03502 ; wipe and retract
G1 X112.838 Y112.665 E-0.05938 ; wipe and retract
G1 X112.855 Y112.827 E-0.04307 ; wipe and retract
G1 X112.812 Y112.936 E-0.03091 ; wipe and retract
;WIPE_END
G1 E-1.60640 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X115.268 Y111.265 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.189 Y111.118 E0.00775 ; perimeter
G1 X115.169 Y111.008 E0.00514 ; perimeter
G1 X115.174 Y110.741 E0.01238 ; perimeter
G1 X115.271 Y110.525 E0.01096 ; perimeter
G1 X115.313 Y110.478 E0.00296 ; perimeter
G1 X115.474 Y110.424 E0.00784 ; perimeter
G1 X115.688 Y110.435 E0.00995 ; perimeter
G1 X115.772 Y110.531 E0.00589 ; perimeter
G1 X115.876 Y110.872 E0.01654 ; perimeter
G1 X115.837 Y111.142 E0.01262 ; perimeter
G1 X115.773 Y111.262 E0.00632 ; perimeter
G1 X115.691 Y111.330 E0.00493 ; perimeter
G1 X115.564 Y111.362 E0.00606 ; perimeter
G1 X115.404 Y111.355 E0.00741 ; perimeter
G1 X115.308 Y111.309 E0.00491 ; perimeter
G1 X115.318 Y111.105 F10800.000 ; move inwards before travel
G1 X115.486 Y110.674 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.200369
G1 F2400.000
G1 X115.525 Y110.899 E0.00299 ; infill
G1 X115.518 Y111.027 E0.00169 ; infill
G1 X115.569 Y111.112 E0.00130 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.518 Y111.027 E-0.02611 ; wipe and retract
G1 X115.525 Y110.899 E-0.03397 ; wipe and retract
G1 X115.486 Y110.674 E-0.06026 ; wipe and retract
;WIPE_END
G1 E-2.27966 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X115.677 Y106.072 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.533 Y106.126 E0.00712 ; perimeter
G1 X115.339 Y106.115 E0.00903 ; perimeter
G1 X115.267 Y106.086 E0.00355 ; perimeter
G1 X115.175 Y106.009 E0.00559 ; perimeter
G1 X115.089 Y105.877 E0.00727 ; perimeter
G1 X115.049 Y105.703 E0.00829 ; perimeter
G1 X115.061 Y105.558 E0.00675 ; perimeter
G1 X115.092 Y105.478 E0.00394 ; perimeter
G1 X115.278 Y105.293 E0.01214 ; perimeter
G1 X115.402 Y105.246 E0.00617 ; perimeter
G1 X115.506 Y105.245 E0.00479 ; perimeter
G1 X115.656 Y105.303 E0.00747 ; perimeter
G1 X115.789 Y105.443 E0.00893 ; perimeter
G1 X115.844 Y105.660 E0.01037 ; perimeter
G1 X115.841 Y105.800 E0.00649 ; perimeter
G1 X115.766 Y105.986 E0.00931 ; perimeter
G1 X115.720 Y106.030 E0.00293 ; perimeter
G1 X115.540 Y106.003 F10800.000 ; move inwards before travel
G1 X115.458 Y105.633 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.343216
G1 F2400.000
G1 X115.455 Y105.740 E0.00266 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.458 Y105.633 E-0.02807 ; wipe and retract
;WIPE_END
G1 E-2.37193 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X114.108 Y101.647 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.952 Y101.668 E0.00728 ; perimeter
G1 X113.860 Y101.643 E0.00438 ; perimeter
G1 X113.691 Y101.541 E0.00915 ; perimeter
G1 X113.501 Y101.247 E0.01621 ; perimeter
G1 X113.469 Y101.132 E0.00554 ; perimeter
G1 X113.482 Y101.046 E0.00400 ; perimeter
G1 X113.425 Y100.801 E0.01165 ; perimeter
G1 X113.462 Y100.655 E0.00701 ; perimeter
G1 X113.593 Y100.510 E0.00904 ; perimeter
G1 X113.808 Y100.505 E0.00997 ; perimeter
G1 X113.887 Y100.533 E0.00391 ; perimeter
G1 X114.001 Y100.610 E0.00635 ; perimeter
G1 X114.127 Y100.751 E0.00877 ; perimeter
G1 X114.231 Y100.981 E0.01167 ; perimeter
G1 X114.277 Y101.225 E0.01152 ; perimeter
G1 X114.228 Y101.538 E0.01468 ; perimeter
G1 X114.156 Y101.612 E0.00479 ; perimeter
G1 X113.975 Y101.563 F10800.000 ; move inwards before travel
G1 X113.996 Y101.419 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.149471
G1 F2400.000
G1 X113.969 Y101.350 E0.00065 ; infill
;WIDTH:0.165985
G1 X113.686 Y100.766 E0.00664 ; infill
G1 X113.757 Y100.747 F10800.000 ; move to first infill point
;WIDTH:0.276606
G1 F2400.000
G1 X113.953 Y101.407 E0.01338 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.757 Y100.747 E-0.18164 ; wipe and retract
;WIPE_END
G1 E-2.21836 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X111.902 Y98.516 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.698 Y98.499 E0.00950 ; perimeter
G1 X111.328 Y98.278 E0.01995 ; perimeter
G1 X111.164 Y98.212 E0.00817 ; perimeter
G1 X110.956 Y98.061 E0.01192 ; perimeter
G1 X110.739 Y97.824 E0.01486 ; perimeter
G1 X110.580 Y97.374 E0.02211 ; perimeter
G1 X110.495 Y97.315 E0.00482 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.366 Y97.226 E0.00653 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.879 Y96.937 E0.02624 ; perimeter
G1 X109.719 Y96.885 E0.00778 ; perimeter
G1 X109.536 Y96.737 E0.01091 ; perimeter
G1 X109.273 Y96.475 E0.01721 ; perimeter
G1 X108.986 Y96.239 E0.01721 ; perimeter
G1 X108.395 Y96.013 E0.02930 ; perimeter
G1 X107.726 Y95.855 E0.03184 ; perimeter
G1 X107.651 Y95.791 E0.00455 ; perimeter
G1 X107.423 Y95.737 E0.01086 ; perimeter
G1 X107.218 Y95.742 E0.00951 ; perimeter
G1 X106.281 Y95.474 E0.04513 ; perimeter
G1 X106.095 Y95.308 E0.01155 ; perimeter
G1 X106.098 Y95.139 E0.00782 ; perimeter
G1 X106.160 Y94.974 E0.00818 ; perimeter
G1 X106.240 Y94.910 E0.00476 ; perimeter
G1 X106.264 Y94.859 E0.00260 ; perimeter
G1 X106.309 Y94.836 E0.00232 ; perimeter
G1 X106.498 Y94.765 E0.00936 ; perimeter
G1 X106.706 Y94.730 E0.00976 ; perimeter
G1 X107.080 Y94.812 E0.01773 ; perimeter
G1 X107.290 Y94.919 E0.01094 ; perimeter
G1 X107.537 Y95.130 E0.01501 ; perimeter
G1 X107.765 Y95.182 E0.01086 ; perimeter
G1 X107.956 Y95.287 E0.01012 ; perimeter
G1 X108.111 Y95.280 E0.00715 ; perimeter
G1 X108.219 Y95.313 E0.00523 ; perimeter
G1 X108.649 Y95.323 E0.01993 ; perimeter
G1 X109.029 Y95.377 E0.01779 ; perimeter
G1 X109.234 Y95.446 E0.01002 ; perimeter
G1 X109.645 Y95.682 E0.02196 ; perimeter
G1 X109.829 Y95.854 E0.01167 ; perimeter
G1 X109.976 Y96.116 E0.01389 ; perimeter
G1 X110.048 Y96.200 E0.00513 ; perimeter
G1 X110.153 Y96.440 E0.01214 ; perimeter
G1 X110.220 Y96.548 E0.00592 ; perimeter
G1 X110.276 Y96.882 E0.01565 ; perimeter
G1 X110.457 Y97.057 E0.01169 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.552 Y97.181 E0.00649 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.654 Y97.332 E0.00845 ; perimeter
G1 X110.910 Y97.302 E0.01197 ; perimeter
G1 X111.156 Y97.383 E0.01201 ; perimeter
G1 X111.231 Y97.381 E0.00348 ; perimeter
G1 X111.332 Y97.409 E0.00485 ; perimeter
G1 X111.463 Y97.460 E0.00649 ; perimeter
G1 X111.707 Y97.595 E0.01294 ; perimeter
G1 X111.900 Y97.751 E0.01147 ; perimeter
G1 X112.095 Y98.031 E0.01584 ; perimeter
G1 X112.128 Y98.156 E0.00599 ; perimeter
G1 X112.289 Y98.445 E0.01532 ; perimeter
G1 X112.354 Y98.738 E0.01388 ; perimeter
G1 X112.146 Y98.689 E0.00993 ; perimeter
G1 X111.951 Y98.551 E0.01104 ; perimeter
G1 X111.838 Y98.321 F10800.000 ; move inwards before travel
G1 X111.867 Y98.272 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.229274
G1 F2400.000
G1 X111.476 Y97.752 E0.01008 ; infill
G1 X110.912 Y97.588 F10800.000 ; move to first infill point
;WIDTH:0.326885
G1 F2400.000
G1 X111.212 Y97.773 E0.00833 ; infill
;WIDTH:0.336459
G1 X111.513 Y97.937 E0.00835 ; infill
G1 X111.891 Y98.200 E0.01125 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.513 Y97.937 E-0.12162 ; wipe and retract
G1 X111.212 Y97.773 E-0.09031 ; wipe and retract
;WIPE_END
G1 E-2.18807 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X109.933 Y96.701 ; move to first infill point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.308235
G1 F2400.000
G1 X109.728 Y96.401 E0.00802 ; infill
G1 X109.496 Y96.116 E0.00812 ; infill
;WIDTH:0.406968
G1 X109.213 Y95.901 E0.01076 ; infill
;WIDTH:0.371127
G1 X109.063 Y95.825 E0.00457 ; infill
G1 X108.776 Y95.738 E0.00819 ; infill
;WIDTH:0.347038
G1 X108.618 Y95.697 E0.00413 ; infill
;WIDTH:0.31062
G1 X108.507 Y95.675 E0.00252 ; infill
;WIDTH:0.272203
G1 X108.335 Y95.653 E0.00330 ; infill
;WIDTH:0.235139
G1 X108.179 Y95.632 E0.00252 ; infill
;WIDTH:0.202221
G1 X107.902 Y95.589 E0.00371 ; infill
;WIDTH:0.159026
G1 X107.795 Y95.531 E0.00118 ; infill
;WIDTH:0.145099
G1 X107.654 Y95.474 E0.00130 ; infill
G1 X107.371 Y95.414 E0.00245 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.654 Y95.474 E-0.07618 ; wipe and retract
G1 X107.795 Y95.531 E-0.04026 ; wipe and retract
;WIPE_END
G1 E-2.28357 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X104.697 Y95.521 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.353 Y95.662 E0.01721 ; perimeter
G1 X103.834 Y95.676 E0.02408 ; perimeter
G1 X103.630 Y95.627 E0.00971 ; perimeter
G1 X103.377 Y95.605 E0.01178 ; perimeter
G1 X103.302 Y95.445 E0.00816 ; perimeter
G1 X103.348 Y95.367 E0.00419 ; perimeter
G1 X103.350 Y95.285 E0.00380 ; perimeter
G1 X103.602 Y95.034 E0.01646 ; perimeter
G1 X103.944 Y94.873 E0.01753 ; perimeter
G1 X104.294 Y94.838 E0.01628 ; perimeter
G1 X104.498 Y94.872 E0.00957 ; perimeter
G1 X104.637 Y94.952 E0.00742 ; perimeter
G1 X104.712 Y95.116 E0.00837 ; perimeter
G1 X104.822 Y95.200 E0.00643 ; perimeter
G1 X104.842 Y95.296 E0.00453 ; perimeter
G1 X104.730 Y95.471 E0.00961 ; perimeter
G1 X104.353 Y95.381 F10800.000 ; move inwards before travel
G1 X104.484 Y95.199 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.382483
G1 F2400.000
G1 X104.267 Y95.253 E0.00632 ; infill
G1 X103.672 Y95.291 E0.01684 ; infill
G1 X103.594 Y95.377 F10800.000 ; move to first infill point
;WIDTH:0.127863
G1 F2400.000
G1 X103.678 Y95.347 E0.00063 ; infill
;WIDTH:0.168842
G1 X104.437 Y95.115 E0.00831 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.678 Y95.347 E-0.20937 ; wipe and retract
;WIPE_END
G1 E-2.19063 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X101.442 Y104.066 ; move to first perimeter point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.360 Y104.191 E0.00693 ; perimeter
G1 X101.247 Y104.257 E0.00605 ; perimeter
G1 X100.950 Y104.296 E0.01388 ; perimeter
G1 X100.750 Y104.184 E0.01061 ; perimeter
G1 X100.563 Y103.753 E0.02173 ; perimeter
G1 X100.248 Y102.635 E0.05382 ; perimeter
G1 X100.192 Y101.997 E0.02965 ; perimeter
G1 X100.216 Y101.697 E0.01395 ; perimeter
G1 X100.301 Y101.215 E0.02268 ; perimeter
G1 X100.422 Y100.906 E0.01537 ; perimeter
G1 X100.386 Y100.597 E0.01443 ; perimeter
G1 X100.319 Y100.383 E0.01039 ; perimeter
G1 X100.257 Y100.310 E0.00442 ; perimeter
G1 X100.224 Y100.171 E0.00660 ; perimeter
G1 X100.153 Y100.086 E0.00514 ; perimeter
G1 X100.142 Y99.968 E0.00546 ; perimeter
G1 X100.032 Y99.828 E0.00825 ; perimeter
G1 X99.987 Y99.631 E0.00936 ; perimeter
G1 X100.003 Y99.349 E0.01311 ; perimeter
G1 X100.763 Y97.031 E0.11300 ; perimeter
G1 X100.922 Y96.875 E0.01034 ; perimeter
G1 X100.969 Y96.781 E0.00484 ; perimeter
G1 X101.062 Y96.684 E0.00622 ; perimeter
G1 X101.148 Y96.644 E0.00440 ; perimeter
G1 X101.276 Y96.544 E0.00755 ; perimeter
G1 X101.579 Y96.453 E0.01464 ; perimeter
G1 X101.771 Y96.333 E0.01049 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.948 Y96.222 E0.00873 ; perimeter (bridge)
G1 X101.855 Y96.367 E0.00721 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.786 Y96.473 E0.00585 ; perimeter
G1 X101.760 Y96.758 E0.01323 ; perimeter
G1 X101.669 Y96.929 E0.00900 ; perimeter
G1 X101.605 Y97.236 E0.01453 ; perimeter
G1 X101.503 Y97.413 E0.00944 ; perimeter
G1 X101.166 Y98.243 E0.04152 ; perimeter
G1 X100.903 Y99.009 E0.03750 ; perimeter
G1 X100.793 Y99.708 E0.03276 ; perimeter
G1 X100.810 Y99.838 E0.00608 ; perimeter
G1 X100.699 Y100.642 E0.03758 ; perimeter
G1 X100.749 Y100.991 E0.01637 ; perimeter
G1 X100.836 Y101.180 E0.00963 ; perimeter
G1 X100.889 Y101.429 E0.01179 ; perimeter
G1 X100.944 Y101.575 E0.00724 ; perimeter
G1 X100.953 Y101.791 E0.01000 ; perimeter
G1 X100.986 Y101.977 E0.00875 ; perimeter
G1 X100.991 Y102.280 E0.01403 ; perimeter
G1 X101.110 Y102.807 E0.02506 ; perimeter
G1 X101.164 Y102.986 E0.00865 ; perimeter
G1 X101.293 Y103.225 E0.01255 ; perimeter
G1 X101.357 Y103.295 E0.00444 ; perimeter
G1 X101.455 Y103.510 E0.01093 ; perimeter
G1 X101.485 Y103.672 E0.00760 ; perimeter
G1 X101.448 Y104.006 E0.01560 ; perimeter
G1 X101.293 Y104.085 F10800.000 ; move inwards before travel
G1 X101.190 Y104.004 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.439682
G1 F2400.000
G1 X100.927 Y103.455 E0.02007 ; infill
;WIDTH:0.42335
G1 X100.866 Y103.304 E0.00517 ; infill
;WIDTH:0.387392
G1 X100.805 Y103.152 E0.00468 ; infill
;WIDTH:0.351435
G1 X100.733 Y102.912 E0.00643 ; infill
;WIDTH:0.34388
G1 X100.644 Y102.563 E0.00903 ; infill
G1 X100.609 Y102.340 E0.00563 ; infill
;WIDTH:0.332261
G1 X100.581 Y101.841 E0.01204 ; infill
;WIDTH:0.311408
G1 X100.582 Y101.744 E0.00216 ; infill
;WIDTH:0.29855
G1 X100.612 Y101.288 E0.00971 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.582 Y101.744 E-0.12061 ; wipe and retract
;WIPE_END
G1 E-2.27939 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 X100.278 Y99.286 ; move to first infill point
G1 Z24.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.252178
G1 F2400.000
G1 X100.467 Y99.836 E0.01013 ; infill
;WIDTH:0.24088
G1 X100.469 Y99.866 E0.00050 ; infill
;WIDTH:0.229244
G1 X100.463 Y100.133 E0.00414 ; infill
G1 X100.535 Y100.062 F10800.000 ; move to first infill point
;WIDTH:0.302513
G1 F2400.000
G1 X100.407 Y99.682 E0.00866 ; infill
G1 X100.398 Y99.597 E0.00184 ; infill
G1 X100.416 Y99.427 E0.00368 ; infill
G1 X100.536 Y98.930 E0.01104 ; infill
G1 X100.808 Y98.114 E0.01858 ; infill
G1 X101.123 Y97.255 E0.01975 ; infill
G1 X101.241 Y97.097 E0.00424 ; infill
G1 X101.402 Y96.758 E0.00812 ; infill
;LAYER_CHANGE
;Z:24.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;24.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.241 Y97.097 E-0.09924 ; wipe and retract
G1 X101.123 Y97.255 E-0.05183 ; wipe and retract
G1 X100.808 Y98.114 E-0.24139 ; wipe and retract
G1 X100.536 Y98.930 E-0.22714 ; wipe and retract
G1 X100.416 Y99.427 E-0.13497 ; wipe and retract
G1 X100.398 Y99.597 E-0.04498 ; wipe and retract
G1 X100.407 Y99.682 E-0.02253 ; wipe and retract
G1 X100.535 Y100.062 E-0.10591 ; wipe and retract
;WIPE_END
G1 E-1.47200 F2400.000 ; retract
G1 Z24.475 F10800.000 ; lift Z
G1 Z24.600 ; move to next layer (122)
;AFTER_LAYER_CHANGE
;24.6
G1 Z24.675 ; lift Z
G1 X101.574 Y103.945 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.358 Y104.123 E0.01296 ; perimeter
G1 X101.312 Y104.185 E0.00359 ; perimeter
G1 X101.013 Y104.236 E0.01406 ; perimeter
G1 X100.825 Y104.139 E0.00980 ; perimeter
G1 X100.751 Y104.061 E0.00500 ; perimeter
G1 X100.562 Y103.592 E0.02340 ; perimeter
G1 X100.471 Y103.295 E0.01438 ; perimeter
G1 X100.240 Y102.287 E0.04790 ; perimeter
G1 X100.193 Y101.721 E0.02631 ; perimeter
G1 X100.252 Y101.101 E0.02885 ; perimeter
G1 X100.241 Y100.632 E0.02173 ; perimeter
G1 X100.190 Y100.295 E0.01582 ; perimeter
G1 X100.150 Y100.192 E0.00510 ; perimeter
G1 X100.127 Y99.940 E0.01173 ; perimeter
G1 X100.055 Y99.850 E0.00532 ; perimeter
G1 X100.032 Y99.750 E0.00477 ; perimeter
G1 X100.085 Y99.347 E0.01880 ; perimeter
G1 X100.188 Y98.957 E0.01868 ; perimeter
G1 X100.348 Y98.534 E0.02099 ; perimeter
G1 X100.545 Y97.798 E0.03529 ; perimeter
G1 X100.800 Y97.008 E0.03842 ; perimeter
G1 X100.883 Y96.927 E0.00537 ; perimeter
G1 X100.969 Y96.754 E0.00895 ; perimeter
G1 X101.210 Y96.490 E0.01655 ; perimeter
G1 X101.539 Y96.231 E0.01942 ; perimeter
G1 X102.061 Y95.881 E0.02911 ; perimeter
G1 X102.598 Y95.577 E0.02857 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.672 Y95.529 E0.00370 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.206 Y95.177 E0.02961 ; perimeter
G1 X103.791 Y94.924 E0.02954 ; perimeter
G1 X104.441 Y94.843 E0.03032 ; perimeter
G1 X104.727 Y94.887 E0.01340 ; perimeter
G1 X105.125 Y95.174 E0.02274 ; perimeter
G1 X105.180 Y95.179 E0.00254 ; perimeter
G1 X105.224 Y95.209 E0.00246 ; perimeter
G1 X105.152 Y95.369 E0.00812 ; perimeter
G1 X104.973 Y95.412 E0.00856 ; perimeter
G1 X104.893 Y95.530 E0.00658 ; perimeter
G1 X104.573 Y95.663 E0.01608 ; perimeter
G1 X103.599 Y95.697 E0.04513 ; perimeter
G1 X103.296 Y95.672 E0.01411 ; perimeter
G1 X102.825 Y95.781 E0.02240 ; perimeter
G1 X102.657 Y95.957 E0.01125 ; perimeter
G1 X102.259 Y96.296 E0.02421 ; perimeter
G1 X102.029 Y96.550 E0.01585 ; perimeter
G1 X101.826 Y96.839 E0.01638 ; perimeter
G1 X101.770 Y96.982 E0.00710 ; perimeter
G1 X101.359 Y97.693 E0.03805 ; perimeter
G1 X100.956 Y98.676 E0.04923 ; perimeter
G1 X100.835 Y98.911 E0.01223 ; perimeter
G1 X100.799 Y99.153 E0.01134 ; perimeter
G1 X100.829 Y99.448 E0.01372 ; perimeter
G1 X100.803 Y99.612 E0.00772 ; perimeter
G1 X100.851 Y99.999 E0.01805 ; perimeter
G1 X100.831 Y100.184 E0.00861 ; perimeter
G1 X100.865 Y100.772 E0.02727 ; perimeter
G1 X100.956 Y101.272 E0.02357 ; perimeter
G1 X100.994 Y102.319 E0.04852 ; perimeter
G1 X101.101 Y102.843 E0.02476 ; perimeter
G1 X101.352 Y103.226 E0.02123 ; perimeter
G1 X101.485 Y103.373 E0.00918 ; perimeter
G1 X101.512 Y103.433 E0.00307 ; perimeter
G1 X101.535 Y103.552 E0.00559 ; perimeter
G1 X101.597 Y103.674 E0.00634 ; perimeter
G1 X101.582 Y103.885 E0.00983 ; perimeter
G1 X101.294 Y103.936 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.358 Y104.123 E-0.08606 ; wipe and retract
G1 X101.312 Y104.185 E-0.02046 ; wipe and retract
G1 X101.013 Y104.236 E-0.08008 ; wipe and retract
G1 X100.825 Y104.139 E-0.05583 ; wipe and retract
G1 X100.751 Y104.061 E-0.02851 ; wipe and retract
G1 X100.562 Y103.592 E-0.13329 ; wipe and retract
G1 X100.471 Y103.295 E-0.08194 ; wipe and retract
G1 X100.240 Y102.287 E-0.27286 ; wipe and retract
G1 X100.193 Y101.721 E-0.14989 ; wipe and retract
G1 X100.252 Y101.101 E-0.16438 ; wipe and retract
G1 X100.241 Y100.632 E-0.12377 ; wipe and retract
G1 X100.190 Y100.295 E-0.09013 ; wipe and retract
G1 X100.150 Y100.192 E-0.02904 ; wipe and retract
G1 X100.127 Y99.940 E-0.06685 ; wipe and retract
G1 X100.055 Y99.850 E-0.03031 ; wipe and retract
G1 X100.032 Y99.750 E-0.02718 ; wipe and retract
G1 X100.085 Y99.347 E-0.10710 ; wipe and retract
G1 X100.188 Y98.957 E-0.10643 ; wipe and retract
G1 X100.348 Y98.534 E-0.11956 ; wipe and retract
G1 X100.545 Y97.798 E-0.20102 ; wipe and retract
G1 X100.800 Y97.008 E-0.21890 ; wipe and retract
G1 X100.883 Y96.927 E-0.03059 ; wipe and retract
G1 X100.969 Y96.754 E-0.05097 ; wipe and retract
G1 X100.981 Y96.741 E-0.00485 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X110.730 Y97.137 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.021 Y97.232 E0.01418 ; perimeter
G1 X111.519 Y97.499 E0.02617 ; perimeter
G1 X111.794 Y97.775 E0.01804 ; perimeter
G1 X111.909 Y97.972 E0.01056 ; perimeter
G1 X111.949 Y98.114 E0.00683 ; perimeter
G1 X111.968 Y98.278 E0.00766 ; perimeter
G1 X111.947 Y98.300 E0.00143 ; perimeter
G1 X111.844 Y98.282 E0.00484 ; perimeter
G1 X111.723 Y98.317 E0.00585 ; perimeter
G1 X111.402 Y98.277 E0.01498 ; perimeter
G1 X110.978 Y98.098 E0.02133 ; perimeter
G1 X110.721 Y97.924 E0.01437 ; perimeter
G1 X110.472 Y97.662 E0.01675 ; perimeter
G1 X110.425 Y97.530 E0.00648 ; perimeter
G1 X110.004 Y97.231 E0.02393 ; perimeter
G1 X109.693 Y96.975 E0.01867 ; perimeter
G1 X109.577 Y96.798 E0.00977 ; perimeter
G1 X109.425 Y96.643 E0.01006 ; perimeter
G1 X109.373 Y96.543 E0.00522 ; perimeter
G1 X108.991 Y96.213 E0.02340 ; perimeter
G1 X108.502 Y96.023 E0.02433 ; perimeter
G1 X108.087 Y96.017 E0.01920 ; perimeter
G1 X107.423 Y95.866 E0.03157 ; perimeter
G1 X106.143 Y95.496 E0.06169 ; perimeter
G1 X106.020 Y95.407 E0.00704 ; perimeter
G1 X105.915 Y95.378 E0.00505 ; perimeter
G1 X105.867 Y95.268 E0.00555 ; perimeter
G1 X105.704 Y95.222 E0.00784 ; perimeter
G1 X105.874 Y95.070 E0.01054 ; perimeter
G1 X105.939 Y95.060 E0.00308 ; perimeter
G1 X106.116 Y94.921 E0.01041 ; perimeter
G1 X106.652 Y94.778 E0.02567 ; perimeter
G1 X107.172 Y94.875 E0.02454 ; perimeter
G1 X107.445 Y94.990 E0.01369 ; perimeter
G1 X107.554 Y95.083 E0.00664 ; perimeter
G1 X108.292 Y95.268 E0.03525 ; perimeter
G1 X108.486 Y95.281 E0.00902 ; perimeter
G1 X109.038 Y95.436 E0.02655 ; perimeter
G1 X109.450 Y95.650 E0.02149 ; perimeter
G1 X109.695 Y95.822 E0.01388 ; perimeter
G1 X109.920 Y96.016 E0.01375 ; perimeter
G1 X110.161 Y96.314 E0.01775 ; perimeter
G1 X110.413 Y96.745 E0.02315 ; perimeter
G1 X110.692 Y97.090 E0.02055 ; perimeter
G1 X110.727 Y97.443 F10800.000 ; move inwards before travel
G1 X110.474 Y97.240 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.145038
G1 F2400.000
G1 X110.142 Y96.925 E0.00388 ; infill
;WIDTH:0.259249
G1 X109.622 Y96.258 E0.01521 ; infill
G1 X109.159 Y95.898 E0.01056 ; infill
G1 X108.901 Y95.781 E0.00508 ; infill
G1 X108.589 Y95.677 E0.00592 ; infill
G1 X108.134 Y95.629 E0.00824 ; infill
G1 X107.403 Y95.451 E0.01352 ; infill
;WIDTH:0.361678
G1 X107.337 Y95.424 E0.00189 ; infill
G1 X107.217 Y95.360 F10800.000 ; move to first infill point
;WIDTH:0.440302
G1 F2400.000
G1 X106.937 Y95.273 E0.00967 ; infill
;WIDTH:0.429512
G1 X106.652 Y95.206 E0.00943 ; infill
;WIDTH:0.401198
G1 X106.173 Y95.183 E0.01427 ; infill
G1 X104.773 Y95.277 F10800.000 ; move to first infill point
;WIDTH:0.381291
G1 F2400.000
G1 X104.435 Y95.257 E0.00953 ; infill
G1 X103.894 Y95.301 E0.01528 ; infill
;WIDTH:0.333216
G1 X103.704 Y95.343 E0.00469 ; infill
;WIDTH:0.297002
G1 X103.515 Y95.386 E0.00411 ; infill
;WIDTH:0.260788
G1 X103.325 Y95.429 E0.00352 ; infill
G1 X101.659 Y96.443 F10800.000 ; move to first infill point
;WIDTH:0.321449
G1 F2400.000
G1 X101.157 Y97.229 E0.02159 ; infill
G1 X101.028 Y97.520 E0.00738 ; infill
;WIDTH:0.308601
G1 X100.888 Y97.899 E0.00891 ; infill
;WIDTH:0.276013
G1 X100.779 Y98.222 E0.00661 ; infill
;WIDTH:0.232415
G1 X100.670 Y98.545 E0.00537 ; infill
;WIDTH:0.188818
G1 X100.640 Y98.624 E0.00103 ; infill
;WIDTH:0.170669
G1 X100.556 Y98.812 E0.00219 ; infill
;WIDTH:0.147632
G1 X100.472 Y99.156 E0.00308 ; infill
;WIDTH:0.258807
G1 X100.426 Y99.625 E0.00847 ; infill
G1 X100.425 Y100.233 E0.01091 ; infill
G1 X100.498 Y100.168 F10800.000 ; move to first infill point
;WIDTH:0.227005
G1 F2400.000
G1 X100.505 Y100.201 E0.00052 ; infill
;WIDTH:0.215114
G1 X100.547 Y100.602 E0.00577 ; infill
;WIDTH:0.175683
G1 X100.591 Y101.215 E0.00679 ; infill
;WIDTH:0.284047
G1 X100.583 Y101.724 E0.01020 ; infill
G1 X100.626 Y102.352 E0.01263 ; infill
G1 X100.759 Y102.959 E0.01246 ; infill
G1 X100.854 Y103.191 E0.00502 ; infill
;WIDTH:0.395086
G1 X101.009 Y103.512 E0.01043 ; infill
;WIDTH:0.495806
G1 X101.088 Y103.672 E0.00671 ; infill
;WIDTH:0.48465
G1 X101.202 Y103.939 E0.01066 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.088 Y103.672 E-0.07658 ; wipe and retract
;WIPE_END
G1 E-2.32342 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X100.485 Y100.771 ; move to first infill point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.275846
G1 F2400.000
G1 X100.491 Y100.002 E0.01490 ; infill
G1 X100.473 Y99.836 E0.00323 ; infill
G1 X100.340 Y99.326 E0.01022 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.473 Y99.836 E-0.13922 ; wipe and retract
G1 X100.491 Y100.002 E-0.04408 ; wipe and retract
G1 X100.485 Y100.771 E-0.20305 ; wipe and retract
;WIPE_END
G1 E-2.01366 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X110.626 Y97.376 ; move to first infill point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.285883
G1 F2400.000
G1 X110.959 Y97.626 E0.00841 ; infill
G1 X111.275 Y97.803 E0.00730 ; infill
G1 X111.666 Y98.067 E0.00953 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.275 Y97.803 E-0.12450 ; wipe and retract
G1 X110.959 Y97.626 E-0.09537 ; wipe and retract
G1 X110.626 Y97.376 E-0.10985 ; wipe and retract
;WIPE_END
G1 E-2.07027 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X113.667 Y100.657 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.782 Y100.654 E0.00530 ; perimeter
G1 X114.034 Y100.744 E0.01240 ; perimeter
G1 X114.167 Y100.885 E0.00898 ; perimeter
G1 X114.299 Y101.154 E0.01389 ; perimeter
G1 X114.342 Y101.317 E0.00783 ; perimeter
G1 X114.348 Y101.473 E0.00722 ; perimeter
G1 X114.261 Y101.745 E0.01324 ; perimeter
G1 X114.187 Y101.814 E0.00470 ; perimeter
G1 X114.038 Y101.848 E0.00705 ; perimeter
G1 X113.878 Y101.790 E0.00790 ; perimeter
G1 X113.750 Y101.691 E0.00752 ; perimeter
G1 X113.556 Y101.379 E0.01702 ; perimeter
G1 X113.524 Y101.192 E0.00876 ; perimeter
G1 X113.497 Y101.137 E0.00282 ; perimeter
G1 X113.496 Y100.966 E0.00793 ; perimeter
G1 X113.538 Y100.795 E0.00818 ; perimeter
G1 X113.626 Y100.701 E0.00598 ; perimeter
G1 X113.756 Y100.729 F10800.000 ; move inwards before travel
G1 X113.755 Y100.919 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.237855
G1 F2400.000
G1 X113.835 Y101.026 E0.00215 ; infill
;WIDTH:0.266683
G1 X113.856 Y101.069 E0.00090 ; infill
;WIDTH:0.279144
G1 X113.872 Y101.098 E0.00064 ; infill
;WIDTH:0.316679
G1 X114.065 Y101.568 E0.01157 ; infill
G1 X114.016 Y101.584 F10800.000 ; move to first infill point
;WIDTH:0.259793
G1 F2400.000
G1 X113.943 Y100.998 E0.01065 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.016 Y101.584 E-0.15579 ; wipe and retract
;WIPE_END
G1 E-2.24421 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X115.391 Y105.166 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.506 Y105.171 E0.00533 ; perimeter
G1 X115.639 Y105.224 E0.00664 ; perimeter
G1 X115.784 Y105.368 E0.00949 ; perimeter
G1 X115.840 Y105.635 E0.01266 ; perimeter
G1 X115.839 Y105.720 E0.00392 ; perimeter
G1 X115.766 Y105.907 E0.00929 ; perimeter
G1 X115.669 Y106.000 E0.00622 ; perimeter
G1 X115.485 Y106.062 E0.00902 ; perimeter
G1 X115.353 Y106.052 E0.00613 ; perimeter
G1 X115.268 Y106.016 E0.00431 ; perimeter
G1 X115.174 Y105.938 E0.00562 ; perimeter
G1 X115.085 Y105.801 E0.00757 ; perimeter
G1 X115.041 Y105.588 E0.01008 ; perimeter
G1 X115.088 Y105.391 E0.00937 ; perimeter
G1 X115.214 Y105.262 E0.00837 ; perimeter
G1 X115.339 Y105.196 E0.00651 ; perimeter
G1 X115.466 Y105.253 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.506 Y105.171 E-0.04457 ; wipe and retract
G1 X115.639 Y105.224 E-0.03780 ; wipe and retract
G1 X115.784 Y105.368 E-0.05407 ; wipe and retract
G1 X115.840 Y105.635 E-0.07210 ; wipe and retract
G1 X115.839 Y105.720 E-0.02236 ; wipe and retract
G1 X115.766 Y105.907 E-0.05292 ; wipe and retract
G1 X115.669 Y106.000 E-0.03542 ; wipe and retract
G1 X115.485 Y106.062 E-0.05137 ; wipe and retract
G1 X115.353 Y106.052 E-0.03492 ; wipe and retract
G1 X115.268 Y106.016 E-0.02453 ; wipe and retract
G1 X115.174 Y105.938 E-0.03204 ; wipe and retract
G1 X115.085 Y105.801 E-0.04315 ; wipe and retract
G1 X115.041 Y105.588 E-0.05743 ; wipe and retract
G1 X115.088 Y105.391 E-0.05338 ; wipe and retract
G1 X115.214 Y105.262 E-0.04771 ; wipe and retract
G1 X115.339 Y105.196 E-0.03710 ; wipe and retract
;WIPE_END
G1 E-1.69913 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X115.591 Y110.528 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.697 Y110.549 E0.00498 ; perimeter
G1 X115.780 Y110.641 E0.00575 ; perimeter
G1 X115.875 Y110.928 E0.01400 ; perimeter
G1 X115.833 Y111.247 E0.01491 ; perimeter
G1 X115.770 Y111.361 E0.00604 ; perimeter
G1 X115.682 Y111.432 E0.00525 ; perimeter
G1 X115.602 Y111.456 E0.00386 ; perimeter
G1 X115.421 Y111.454 E0.00837 ; perimeter
G1 X115.299 Y111.397 E0.00627 ; perimeter
G1 X115.239 Y111.327 E0.00427 ; perimeter
G1 X115.184 Y111.174 E0.00750 ; perimeter
G1 X115.157 Y111.017 E0.00740 ; perimeter
G1 X115.169 Y110.847 E0.00788 ; perimeter
G1 X115.256 Y110.664 E0.00940 ; perimeter
G1 X115.381 Y110.604 E0.00641 ; perimeter
G1 X115.426 Y110.541 E0.00361 ; perimeter
G1 X115.531 Y110.524 E0.00494 ; perimeter
G1 X115.643 Y110.622 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.697 Y110.549 E-0.04408 ; wipe and retract
G1 X115.780 Y110.641 E-0.03276 ; wipe and retract
G1 X115.875 Y110.928 E-0.07974 ; wipe and retract
G1 X115.833 Y111.247 E-0.08494 ; wipe and retract
G1 X115.770 Y111.361 E-0.03440 ; wipe and retract
G1 X115.682 Y111.432 E-0.02988 ; wipe and retract
G1 X115.602 Y111.456 E-0.02199 ; wipe and retract
G1 X115.421 Y111.454 E-0.04767 ; wipe and retract
G1 X115.299 Y111.397 E-0.03570 ; wipe and retract
G1 X115.239 Y111.327 E-0.02432 ; wipe and retract
G1 X115.184 Y111.174 E-0.04274 ; wipe and retract
G1 X115.157 Y111.017 E-0.04217 ; wipe and retract
G1 X115.169 Y110.847 E-0.04492 ; wipe and retract
G1 X115.256 Y110.664 E-0.05357 ; wipe and retract
G1 X115.381 Y110.604 E-0.03654 ; wipe and retract
G1 X115.426 Y110.541 E-0.02059 ; wipe and retract
G1 X115.531 Y110.524 E-0.02815 ; wipe and retract
;WIPE_END
G1 E-1.69586 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X112.943 Y112.695 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.975 Y112.807 E0.00539 ; perimeter
G1 X112.972 Y112.886 E0.00368 ; perimeter
G1 X112.910 Y113.047 E0.00800 ; perimeter
G1 X112.831 Y113.121 E0.00500 ; perimeter
G1 X112.633 Y113.182 E0.00960 ; perimeter
G1 X112.346 Y113.154 E0.01334 ; perimeter
G1 X112.214 Y113.098 E0.00664 ; perimeter
G1 X112.081 Y112.989 E0.00795 ; perimeter
G1 X111.954 Y112.782 E0.01125 ; perimeter
G1 X111.934 Y112.700 E0.00393 ; perimeter
G1 X111.972 Y112.533 E0.00792 ; perimeter
G1 X112.125 Y112.356 E0.01082 ; perimeter
G1 X112.267 Y112.336 E0.00667 ; perimeter
G1 X112.460 Y112.343 E0.00892 ; perimeter
G1 X112.699 Y112.429 E0.01179 ; perimeter
G1 X112.818 Y112.519 E0.00691 ; perimeter
G1 X112.909 Y112.646 E0.00723 ; perimeter
G1 X112.876 Y112.790 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.975 Y112.807 E-0.04592 ; wipe and retract
G1 X112.972 Y112.886 E-0.02094 ; wipe and retract
G1 X112.910 Y113.047 E-0.04560 ; wipe and retract
G1 X112.831 Y113.121 E-0.02848 ; wipe and retract
G1 X112.633 Y113.182 E-0.05469 ; wipe and retract
G1 X112.346 Y113.154 E-0.07601 ; wipe and retract
G1 X112.214 Y113.098 E-0.03784 ; wipe and retract
G1 X112.081 Y112.989 E-0.04530 ; wipe and retract
G1 X111.954 Y112.782 E-0.06410 ; wipe and retract
G1 X111.934 Y112.700 E-0.02241 ; wipe and retract
G1 X111.972 Y112.533 E-0.04514 ; wipe and retract
G1 X112.125 Y112.356 E-0.06161 ; wipe and retract
G1 X112.267 Y112.336 E-0.03799 ; wipe and retract
G1 X112.460 Y112.343 E-0.05081 ; wipe and retract
G1 X112.699 Y112.429 E-0.06717 ; wipe and retract
G1 X112.818 Y112.519 E-0.03935 ; wipe and retract
G1 X112.909 Y112.646 E-0.04122 ; wipe and retract
;WIPE_END
G1 E-1.61542 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X113.696 Y114.621 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.820 Y114.547 E0.00665 ; perimeter
G1 X114.057 Y114.503 E0.01119 ; perimeter
G1 X114.267 Y114.543 E0.00993 ; perimeter
G1 X114.394 Y114.601 E0.00644 ; perimeter
G1 X114.918 Y114.655 E0.02441 ; perimeter
G1 X115.146 Y114.636 E0.01061 ; perimeter
G1 X115.441 Y114.653 E0.01367 ; perimeter
G1 X115.591 Y114.732 E0.00784 ; perimeter
G1 X115.709 Y114.916 E0.01013 ; perimeter
G1 X115.731 Y115.025 E0.00518 ; perimeter
G1 X115.720 Y115.107 E0.00379 ; perimeter
G1 X115.635 Y115.288 E0.00929 ; perimeter
G1 X115.569 Y115.357 E0.00444 ; perimeter
G1 X115.498 Y115.393 E0.00369 ; perimeter
G1 X115.295 Y115.430 E0.00956 ; perimeter
G1 X115.122 Y115.396 E0.00815 ; perimeter
G1 X114.763 Y115.265 E0.01771 ; perimeter
G1 X114.490 Y115.253 E0.01265 ; perimeter
G1 X113.980 Y115.314 E0.02377 ; perimeter
G1 X113.789 Y115.284 E0.00899 ; perimeter
G1 X113.689 Y115.226 E0.00537 ; perimeter
G1 X113.613 Y115.139 E0.00534 ; perimeter
G1 X113.573 Y115.043 E0.00478 ; perimeter
G1 X113.559 Y114.969 E0.00351 ; perimeter
G1 X113.575 Y114.827 E0.00664 ; perimeter
G1 X113.655 Y114.665 E0.00836 ; perimeter
G1 X113.834 Y114.662 F10800.000 ; move inwards before travel
G1 X113.810 Y114.895 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.183615
G1 F2400.000
G1 X114.826 Y114.959 E0.01191 ; infill
;WIDTH:0.204961
G1 X114.923 Y114.978 E0.00132 ; infill
;WIDTH:0.249407
G1 X115.037 Y114.991 E0.00197 ; infill
;WIDTH:0.297649
G1 X115.166 Y115.006 E0.00276 ; infill
;WIDTH:0.304967
G1 X115.469 Y115.075 E0.00676 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.166 Y115.006 E-0.08193 ; wipe and retract
;WIPE_END
G1 E-2.31807 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X108.369 Y109.504 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.381 Y109.583 E0.00369 ; perimeter
G1 X108.332 Y109.820 E0.01121 ; perimeter
G1 X108.202 Y109.982 E0.00964 ; perimeter
G1 X108.082 Y110.036 E0.00611 ; perimeter
G1 X107.947 Y110.043 E0.00624 ; perimeter
G1 X107.753 Y109.989 E0.00931 ; perimeter
G1 X107.620 Y109.880 E0.00798 ; perimeter
G1 X107.584 Y109.782 E0.00484 ; perimeter
G1 X107.579 Y109.533 E0.01152 ; perimeter
G1 X107.632 Y109.403 E0.00650 ; perimeter
G1 X107.810 Y109.260 E0.01059 ; perimeter
G1 X107.947 Y109.225 E0.00656 ; perimeter
G1 X108.085 Y109.238 E0.00642 ; perimeter
G1 X108.180 Y109.278 E0.00480 ; perimeter
G1 X108.297 Y109.370 E0.00687 ; perimeter
G1 X108.344 Y109.449 E0.00429 ; perimeter
G1 X108.317 Y109.564 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.381 Y109.583 E-0.03649 ; wipe and retract
G1 X108.332 Y109.820 E-0.06384 ; wipe and retract
G1 X108.202 Y109.982 E-0.05490 ; wipe and retract
G1 X108.082 Y110.036 E-0.03479 ; wipe and retract
G1 X107.947 Y110.043 E-0.03554 ; wipe and retract
G1 X107.753 Y109.989 E-0.05306 ; wipe and retract
G1 X107.620 Y109.880 E-0.04546 ; wipe and retract
G1 X107.584 Y109.782 E-0.02759 ; wipe and retract
G1 X107.579 Y109.533 E-0.06563 ; wipe and retract
G1 X107.632 Y109.403 E-0.03705 ; wipe and retract
G1 X107.810 Y109.260 E-0.06033 ; wipe and retract
G1 X107.947 Y109.225 E-0.03738 ; wipe and retract
G1 X108.085 Y109.238 E-0.03655 ; wipe and retract
G1 X108.180 Y109.278 E-0.02735 ; wipe and retract
G1 X108.297 Y109.370 E-0.03912 ; wipe and retract
G1 X108.344 Y109.449 E-0.02442 ; wipe and retract
;WIPE_END
G1 E-1.72049 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 X103.650 Y107.301 ; move to first perimeter point
G1 Z24.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.525 Y107.175 E0.00823 ; perimeter
G1 X103.439 Y106.898 E0.01343 ; perimeter
G1 X103.449 Y106.828 E0.00328 ; perimeter
G1 X103.517 Y106.721 E0.00585 ; perimeter
G1 X103.620 Y106.633 E0.00629 ; perimeter
G1 X103.914 Y106.572 E0.01388 ; perimeter
G1 X103.984 Y106.575 E0.00328 ; perimeter
G1 X104.204 Y106.643 E0.01067 ; perimeter
G1 X104.410 Y106.770 E0.01119 ; perimeter
G1 X104.522 Y106.872 E0.00704 ; perimeter
G1 X104.660 Y107.117 E0.01301 ; perimeter
G1 X104.636 Y107.269 E0.00714 ; perimeter
G1 X104.663 Y107.327 E0.00299 ; perimeter
G1 X104.557 Y107.404 E0.00606 ; perimeter
G1 X104.438 Y107.404 E0.00552 ; perimeter
G1 X104.168 Y107.462 E0.01279 ; perimeter
G1 X103.872 Y107.412 E0.01393 ; perimeter
G1 X103.704 Y107.328 E0.00870 ; perimeter
G1 X103.669 Y107.125 F10800.000 ; move inwards before travel
G1 X103.884 Y106.979 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.346717
G1 F2400.000
G1 X103.700 Y106.924 E0.00487 ; infill
G1 X103.884 Y106.979 F10800.000 ; move to first infill point
;WIDTH:0.359681
G1 F2400.000
G1 X104.159 Y107.069 E0.00761 ; infill
;WIDTH:0.251252
G1 X104.391 Y107.167 E0.00437 ; infill
;LAYER_CHANGE
;Z:24.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;24.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.159 Y107.069 E-0.06650 ; wipe and retract
;WIPE_END
G1 E-2.33350 F2400.000 ; retract
G1 Z24.675 F10800.000 ; lift Z
G1 Z24.800 ; move to next layer (123)
;AFTER_LAYER_CHANGE
;24.8
G1 Z24.875 ; lift Z
G1 X101.028 Y102.879 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.128 Y103.020 E0.00799 ; perimeter
G1 X101.445 Y103.274 E0.01882 ; perimeter
G1 X101.620 Y103.450 E0.01152 ; perimeter
G1 X101.724 Y103.655 E0.01062 ; perimeter
G1 X101.723 Y103.818 E0.00757 ; perimeter
G1 X101.623 Y103.988 E0.00912 ; perimeter
G1 X101.389 Y104.157 E0.01339 ; perimeter
G1 X101.062 Y104.175 E0.01515 ; perimeter
G1 X100.863 Y104.065 E0.01052 ; perimeter
G1 X100.748 Y103.922 E0.00854 ; perimeter
G1 X100.584 Y103.469 E0.02231 ; perimeter
G1 X100.419 Y102.549 E0.04328 ; perimeter
G1 X100.366 Y102.420 E0.00648 ; perimeter
G1 X100.230 Y101.813 E0.02879 ; perimeter
G1 X100.192 Y101.426 E0.01803 ; perimeter
G1 X100.193 Y100.811 E0.02846 ; perimeter
G1 X100.159 Y100.339 E0.02195 ; perimeter
G1 X100.095 Y99.905 E0.02033 ; perimeter
G1 X100.147 Y99.514 E0.01824 ; perimeter
G1 X100.225 Y99.379 E0.00726 ; perimeter
G1 X100.486 Y98.547 E0.04037 ; perimeter
G1 X100.599 Y98.002 E0.02577 ; perimeter
G1 X100.714 Y97.618 E0.01858 ; perimeter
G1 X100.744 Y97.364 E0.01182 ; perimeter
G1 X100.735 Y97.302 E0.00289 ; perimeter
G1 X100.849 Y96.945 E0.01740 ; perimeter
G1 X100.995 Y96.688 E0.01366 ; perimeter
G1 X101.287 Y96.324 E0.02163 ; perimeter
G1 X101.752 Y95.953 E0.02757 ; perimeter
G1 X102.411 Y95.498 E0.03706 ; perimeter
G1 X102.876 Y95.215 E0.02524 ; perimeter
G1 X103.308 Y95.036 E0.02165 ; perimeter
G1 X103.576 Y94.954 E0.01300 ; perimeter
G1 X104.582 Y94.846 E0.04682 ; perimeter
G1 X105.496 Y95.009 E0.04304 ; perimeter
G1 X105.932 Y94.914 E0.02066 ; perimeter
G1 X106.587 Y94.825 E0.03063 ; perimeter
G1 X107.163 Y94.932 E0.02713 ; perimeter
G1 X108.504 Y95.320 E0.06465 ; perimeter
G1 X108.776 Y95.420 E0.01345 ; perimeter
G1 X109.115 Y95.626 E0.01839 ; perimeter
G1 X109.325 Y95.804 E0.01273 ; perimeter
G1 X109.745 Y95.981 E0.02113 ; perimeter
G1 X110.011 Y96.186 E0.01554 ; perimeter
G1 X110.369 Y96.568 E0.02424 ; perimeter
G1 X110.490 Y96.770 E0.01092 ; perimeter
G1 X110.801 Y97.068 E0.01994 ; perimeter
G1 X111.318 Y97.380 E0.02797 ; perimeter
G1 X111.601 Y97.674 E0.01891 ; perimeter
G1 X111.700 Y97.897 E0.01129 ; perimeter
G1 X111.688 Y98.063 E0.00773 ; perimeter
G1 X111.648 Y98.132 E0.00367 ; perimeter
G1 X111.555 Y98.168 E0.00463 ; perimeter
G1 X111.420 Y98.175 E0.00625 ; perimeter
G1 X111.184 Y98.144 E0.01102 ; perimeter
G1 X110.870 Y98.028 E0.01550 ; perimeter
G1 X110.483 Y97.796 E0.02092 ; perimeter
G1 X110.291 Y97.618 E0.01214 ; perimeter
G1 X110.184 Y97.552 E0.00579 ; perimeter
G1 X109.855 Y97.222 E0.02160 ; perimeter
G1 X109.648 Y96.967 E0.01521 ; perimeter
G1 X109.433 Y96.577 E0.02065 ; perimeter
G1 X109.301 Y96.462 E0.00809 ; perimeter
G1 X109.150 Y96.200 E0.01399 ; perimeter
G1 X108.645 Y95.997 E0.02524 ; perimeter
G1 X107.742 Y96.026 E0.04183 ; perimeter
G1 X107.451 Y95.966 E0.01376 ; perimeter
G1 X107.263 Y95.891 E0.00938 ; perimeter
G1 X106.848 Y95.768 E0.02008 ; perimeter
G1 X106.653 Y95.672 E0.01007 ; perimeter
G1 X106.051 Y95.513 E0.02881 ; perimeter
G1 X105.959 Y95.513 E0.00428 ; perimeter
G1 X105.621 Y95.428 E0.01615 ; perimeter
G1 X105.115 Y95.530 E0.02389 ; perimeter
G1 X104.792 Y95.664 E0.01621 ; perimeter
G1 X103.392 Y95.730 E0.06492 ; perimeter
G1 X103.144 Y95.842 E0.01261 ; perimeter
G1 X102.930 Y95.887 E0.01014 ; perimeter
G1 X102.240 Y96.481 E0.04216 ; perimeter
G1 X101.777 Y96.989 E0.03185 ; perimeter
G1 X101.596 Y97.317 E0.01735 ; perimeter
G1 X101.484 Y97.437 E0.00761 ; perimeter
G1 X101.268 Y97.778 E0.01870 ; perimeter
G1 X101.159 Y98.025 E0.01251 ; perimeter
G1 X100.942 Y98.298 E0.01613 ; perimeter
G1 X100.897 Y98.487 E0.00903 ; perimeter
G1 X100.760 Y98.851 E0.01798 ; perimeter
G1 X100.698 Y99.247 E0.01856 ; perimeter
G1 X100.804 Y99.650 E0.01930 ; perimeter
G1 X100.860 Y99.753 E0.00545 ; perimeter
G1 X100.905 Y100.106 E0.01646 ; perimeter
G1 X100.940 Y100.810 E0.03266 ; perimeter
G1 X100.969 Y101.018 E0.00974 ; perimeter
G1 X100.979 Y101.451 E0.02006 ; perimeter
G1 X100.914 Y102.271 E0.03812 ; perimeter
G1 X101.017 Y102.820 E0.02587 ; perimeter
G1 X100.927 Y103.019 F10800.000 ; move inwards before travel
G1 X100.775 Y102.994 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.105233
G1 F2400.000
G1 X100.629 Y102.292 E0.00372 ; infill
G1 X100.618 Y102.149 E0.00074 ; infill
;WIDTH:0.209287
G1 X100.590 Y101.755 E0.00547 ; infill
;WIDTH:0.315985
G1 X100.567 Y100.839 E0.02081 ; infill
;WIDTH:0.30861
G1 X100.489 Y99.873 E0.02142 ; infill
G1 X100.413 Y99.868 E0.00168 ; infill
;WIDTH:0.282577
G1 X100.342 Y99.874 E0.00143 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.413 Y99.868 E-0.01896 ; wipe and retract
;WIPE_END
G1 E-2.38104 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X100.955 Y97.890 ; move to first infill point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.291474
G1 F2400.000
G1 X101.110 Y97.345 E0.01171 ; infill
;WIDTH:0.298575
G1 X101.112 Y97.335 E0.00022 ; infill
;WIDTH:0.333261
G1 X101.169 Y97.212 E0.00328 ; infill
;WIDTH:0.342862
G1 X101.182 Y97.187 E0.00069 ; infill
G1 X100.976 Y97.453 F10800.000 ; move to first infill point
;WIDTH:0.391001
G1 F2400.000
G1 X101.256 Y97.071 E0.01370 ; infill
G1 X101.441 Y96.771 E0.01019 ; infill
;WIDTH:0.27673
G1 X101.574 Y96.611 E0.00405 ; infill
G1 X101.968 Y96.243 E0.01048 ; infill
G1 X102.290 Y95.993 E0.00793 ; infill
;WIDTH:0.15949
G1 X102.808 Y95.607 E0.00626 ; infill
;WIDTH:0.199761
G1 X102.919 Y95.563 E0.00156 ; infill
;WIDTH:0.238053
G1 X103.330 Y95.394 E0.00721 ; infill
;WIDTH:0.272916
G1 X103.429 Y95.372 E0.00194 ; infill
;WIDTH:0.30155
G1 X103.541 Y95.352 E0.00246 ; infill
;WIDTH:0.330183
G1 X103.654 Y95.333 E0.00273 ; infill
;WIDTH:0.357504
G1 X104.111 Y95.297 E0.01198 ; infill
;WIDTH:0.384823
G1 X104.567 Y95.262 E0.01302 ; infill
G1 X105.063 Y95.294 E0.01412 ; infill
G1 X106.121 Y95.131 F10800.000 ; move to first infill point
;WIDTH:0.385053
G1 F2400.000
G1 X106.781 Y95.280 E0.01925 ; infill
G1 X107.815 Y95.585 E0.03066 ; infill
G1 X108.293 Y95.643 E0.01371 ; infill
;WIDTH:0.359697
G1 X108.533 Y95.671 E0.00635 ; infill
;WIDTH:0.312755
G1 X108.772 Y95.700 E0.00541 ; infill
G1 X109.564 Y96.166 F10800.000 ; move to first infill point
;WIDTH:0.313331
G1 F2400.000
G1 X110.175 Y96.996 E0.02318 ; infill
G1 X110.427 Y97.247 E0.00799 ; infill
G1 X110.584 Y97.377 E0.00460 ; infill
;WIDTH:0.346593
G1 X111.041 Y97.672 E0.01372 ; infill
G1 X111.419 Y97.854 E0.01061 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.041 Y97.672 E-0.11085 ; wipe and retract
G1 X110.584 Y97.377 E-0.14342 ; wipe and retract
;WIPE_END
G1 E-2.14573 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X100.738 Y102.961 ; move to first infill point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.237309
G1 F2400.000
G1 X101.228 Y103.929 E0.01753 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.738 Y102.961 E-0.28627 ; wipe and retract
;WIPE_END
G1 E-2.11373 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X113.710 Y100.839 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.780 Y100.811 E0.00349 ; perimeter
G1 X113.852 Y100.811 E0.00336 ; perimeter
G1 X114.063 Y100.883 E0.01033 ; perimeter
G1 X114.205 Y101.015 E0.00898 ; perimeter
G1 X114.310 Y101.191 E0.00949 ; perimeter
G1 X114.407 Y101.455 E0.01302 ; perimeter
G1 X114.414 Y101.649 E0.00899 ; perimeter
G1 X114.357 Y101.897 E0.01181 ; perimeter
G1 X114.313 Y101.952 E0.00327 ; perimeter
G1 X114.083 Y102.024 E0.01116 ; perimeter
G1 X113.933 Y101.966 E0.00745 ; perimeter
G1 X113.792 Y101.836 E0.00887 ; perimeter
G1 X113.610 Y101.515 E0.01711 ; perimeter
G1 X113.557 Y101.246 E0.01268 ; perimeter
G1 X113.616 Y100.933 E0.01475 ; perimeter
G1 X113.667 Y100.881 E0.00339 ; perimeter
G1 X113.779 Y100.867 F10800.000 ; move inwards before travel
G1 X113.831 Y101.079 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.279822
G1 F2400.000
G1 X113.923 Y101.244 E0.00372 ; infill
;WIDTH:0.325133
G1 X114.143 Y101.750 E0.01295 ; infill
G1 X114.088 Y101.767 F10800.000 ; move to first infill point
;WIDTH:0.25448
G1 F2400.000
G1 X113.999 Y101.153 E0.01093 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.088 Y101.767 E-0.16392 ; wipe and retract
;WIPE_END
G1 E-2.23608 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X115.382 Y105.083 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.507 Y105.097 E0.00583 ; perimeter
G1 X115.632 Y105.146 E0.00618 ; perimeter
G1 X115.780 Y105.299 E0.00990 ; perimeter
G1 X115.837 Y105.625 E0.01531 ; perimeter
G1 X115.767 Y105.827 E0.00989 ; perimeter
G1 X115.660 Y105.929 E0.00684 ; perimeter
G1 X115.442 Y105.995 E0.01054 ; perimeter
G1 X115.355 Y105.983 E0.00409 ; perimeter
G1 X115.259 Y105.938 E0.00492 ; perimeter
G1 X115.174 Y105.868 E0.00510 ; perimeter
G1 X115.077 Y105.721 E0.00818 ; perimeter
G1 X115.034 Y105.522 E0.00944 ; perimeter
G1 X115.081 Y105.313 E0.00988 ; perimeter
G1 X115.194 Y105.190 E0.00776 ; perimeter
G1 X115.330 Y105.113 E0.00725 ; perimeter
G1 X115.460 Y105.182 F10800.000 ; move inwards before travel
G1 X115.448 Y105.598 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.328938
G1 F2400.000
G1 X115.425 Y105.508 E0.00221 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.448 Y105.598 E-0.02458 ; wipe and retract
;WIPE_END
G1 E-2.37542 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X115.603 Y110.625 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.703 Y110.660 E0.00491 ; perimeter
G1 X115.788 Y110.750 E0.00574 ; perimeter
G1 X115.875 Y110.989 E0.01178 ; perimeter
G1 X115.850 Y111.283 E0.01366 ; perimeter
G1 X115.760 Y111.467 E0.00950 ; perimeter
G1 X115.676 Y111.532 E0.00490 ; perimeter
G1 X115.438 Y111.552 E0.01107 ; perimeter
G1 X115.292 Y111.482 E0.00749 ; perimeter
G1 X115.228 Y111.392 E0.00512 ; perimeter
G1 X115.185 Y111.241 E0.00729 ; perimeter
G1 X115.195 Y111.141 E0.00466 ; perimeter
G1 X115.160 Y111.020 E0.00584 ; perimeter
G1 X115.168 Y110.945 E0.00347 ; perimeter
G1 X115.268 Y110.743 E0.01046 ; perimeter
G1 X115.543 Y110.623 E0.01390 ; perimeter
G1 X115.655 Y110.718 F10800.000 ; move inwards before travel
G1 X115.525 Y110.888 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.250493
G1 F2400.000
G1 X115.530 Y111.094 E0.00355 ; infill
;WIDTH:0.23121
G1 X115.519 Y111.211 E0.00185 ; infill
;WIDTH:0.219523
G1 X115.518 Y111.223 E0.00017 ; infill
;WIDTH:0.211372
G1 X115.464 Y111.297 E0.00129 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.518 Y111.223 E-0.02423 ; wipe and retract
;WIPE_END
G1 E-2.37577 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X113.093 Y112.863 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.088 Y112.946 E0.00385 ; perimeter
G1 X113.030 Y113.104 E0.00781 ; perimeter
G1 X112.968 Y113.162 E0.00395 ; perimeter
G1 X112.754 Y113.238 E0.01051 ; perimeter
G1 X112.649 Y113.239 E0.00485 ; perimeter
G1 X112.509 Y113.219 E0.00659 ; perimeter
G1 X112.341 Y113.153 E0.00835 ; perimeter
G1 X112.196 Y113.040 E0.00851 ; perimeter
G1 X112.088 Y112.871 E0.00928 ; perimeter
G1 X112.059 Y112.732 E0.00658 ; perimeter
G1 X112.098 Y112.566 E0.00789 ; perimeter
G1 X112.280 Y112.418 E0.01085 ; perimeter
G1 X112.597 Y112.405 E0.01471 ; perimeter
G1 X112.785 Y112.466 E0.00916 ; perimeter
G1 X112.925 Y112.559 E0.00776 ; perimeter
G1 X113.051 Y112.731 E0.00985 ; perimeter
G1 X113.075 Y112.805 E0.00365 ; perimeter
G1 X113.027 Y112.913 F10800.000 ; move inwards before travel
G1 X113.771 Y114.605 ; move to first perimeter point
G1 F1800.000
G1 X113.915 Y114.521 E0.00774 ; perimeter
G1 X114.132 Y114.481 E0.01022 ; perimeter
G1 X114.959 Y114.635 E0.03895 ; perimeter
G1 X115.128 Y114.621 E0.00785 ; perimeter
G1 X115.435 Y114.644 E0.01425 ; perimeter
G1 X115.608 Y114.742 E0.00921 ; perimeter
G1 X115.715 Y114.916 E0.00945 ; perimeter
G1 X115.739 Y115.023 E0.00507 ; perimeter
G1 X115.725 Y115.099 E0.00358 ; perimeter
G1 X115.619 Y115.306 E0.01078 ; perimeter
G1 X115.573 Y115.349 E0.00291 ; perimeter
G1 X115.466 Y115.401 E0.00553 ; perimeter
G1 X115.300 Y115.421 E0.00774 ; perimeter
G1 X115.105 Y115.383 E0.00920 ; perimeter
G1 X114.762 Y115.271 E0.01671 ; perimeter
G1 X114.521 Y115.263 E0.01113 ; perimeter
G1 X114.095 Y115.301 E0.01983 ; perimeter
G1 X113.880 Y115.274 E0.01006 ; perimeter
G1 X113.772 Y115.215 E0.00568 ; perimeter
G1 X113.692 Y115.124 E0.00563 ; perimeter
G1 X113.641 Y114.997 E0.00630 ; perimeter
G1 X113.655 Y114.807 E0.00885 ; perimeter
G1 X113.730 Y114.649 E0.00811 ; perimeter
G1 X113.931 Y114.651 F10800.000 ; move inwards before travel
G1 X113.995 Y114.933 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.291024
G1 F2400.000
G1 X114.009 Y114.922 E0.00036 ; infill
;WIDTH:0.31558
G1 X114.045 Y114.900 E0.00096 ; infill
G1 X114.131 Y114.892 E0.00197 ; infill
G1 X114.505 Y114.910 E0.00848 ; infill
;WIDTH:0.221207
G1 X114.831 Y114.947 E0.00487 ; infill
;WIDTH:0.240856
G1 X115.468 Y115.071 E0.01068 ; infill
G1 X113.995 Y114.933 F10800.000 ; move to first infill point
;WIDTH:0.265953
G1 F2400.000
G1 X113.989 Y114.941 E0.00018 ; infill
;WIDTH:0.249646
G1 X113.941 Y115.033 E0.00179 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.989 Y114.941 E-0.02742 ; wipe and retract
;WIPE_END
G1 E-2.37258 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X108.341 Y109.376 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.387 Y109.565 E0.00901 ; perimeter
G1 X108.344 Y109.769 E0.00964 ; perimeter
G1 X108.219 Y109.927 E0.00935 ; perimeter
G1 X108.074 Y109.992 E0.00734 ; perimeter
G1 X107.937 Y109.998 E0.00638 ; perimeter
G1 X107.782 Y109.957 E0.00742 ; perimeter
G1 X107.638 Y109.834 E0.00879 ; perimeter
G1 X107.576 Y109.671 E0.00809 ; perimeter
G1 X107.570 Y109.579 E0.00426 ; perimeter
G1 X107.604 Y109.410 E0.00797 ; perimeter
G1 X107.618 Y109.376 E0.00172 ; perimeter
G1 X107.790 Y109.225 E0.01060 ; perimeter
G1 X107.951 Y109.179 E0.00775 ; perimeter
G1 X108.045 Y109.189 E0.00436 ; perimeter
G1 X108.199 Y109.241 E0.00754 ; perimeter
G1 X108.305 Y109.328 E0.00636 ; perimeter
G1 X108.239 Y109.541 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.387 Y109.565 E-0.06615 ; wipe and retract
G1 X108.344 Y109.769 E-0.05494 ; wipe and retract
G1 X108.219 Y109.927 E-0.05325 ; wipe and retract
G1 X108.074 Y109.992 E-0.04182 ; wipe and retract
G1 X107.937 Y109.998 E-0.03637 ; wipe and retract
G1 X107.782 Y109.957 E-0.04227 ; wipe and retract
G1 X107.638 Y109.834 E-0.05005 ; wipe and retract
G1 X107.576 Y109.671 E-0.04606 ; wipe and retract
G1 X107.570 Y109.579 E-0.02428 ; wipe and retract
G1 X107.604 Y109.410 E-0.04542 ; wipe and retract
G1 X107.618 Y109.376 E-0.00981 ; wipe and retract
G1 X107.790 Y109.225 E-0.06037 ; wipe and retract
G1 X107.951 Y109.179 E-0.04415 ; wipe and retract
G1 X108.045 Y109.189 E-0.02481 ; wipe and retract
G1 X108.199 Y109.241 E-0.04296 ; wipe and retract
G1 X108.305 Y109.328 E-0.03620 ; wipe and retract
;WIPE_END
G1 E-1.72107 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 X103.705 Y106.675 ; move to first perimeter point
G1 Z24.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.106 Y106.600 E0.01889 ; perimeter
G1 X104.285 Y106.610 E0.00831 ; perimeter
G1 X104.482 Y106.740 E0.01094 ; perimeter
G1 X104.782 Y107.013 E0.01880 ; perimeter
G1 X104.894 Y107.192 E0.00981 ; perimeter
G1 X105.049 Y107.346 E0.01007 ; perimeter
G1 X105.153 Y107.544 E0.01038 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.164 Y107.573 E0.00128 ; perimeter (bridge)
G1 X105.140 Y107.577 E0.00101 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.025 Y107.601 E0.00541 ; perimeter
G1 X104.392 Y107.537 E0.02948 ; perimeter
G1 X104.082 Y107.483 E0.01457 ; perimeter
G1 X103.799 Y107.350 E0.01450 ; perimeter
G1 X103.654 Y107.209 E0.00938 ; perimeter
G1 X103.570 Y106.975 E0.01154 ; perimeter
G1 X103.583 Y106.831 E0.00667 ; perimeter
G1 X103.668 Y106.722 E0.00642 ; perimeter
G1 X104.048 Y106.881 F10800.000 ; move inwards before travel
G1 X104.642 Y107.243 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.414269
G1 F2400.000
G1 X104.212 Y107.073 E0.01429 ; infill
G1 X103.880 Y106.887 E0.01173 ; infill
;LAYER_CHANGE
;Z:25
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;25
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.212 Y107.073 E-0.10029 ; wipe and retract
G1 X104.642 Y107.243 E-0.12215 ; wipe and retract
;WIPE_END
G1 E-2.17756 F2400.000 ; retract
G1 Z24.875 F10800.000 ; lift Z
G1 Z25.000 ; move to next layer (124)
;AFTER_LAYER_CHANGE
;25
G1 Z25.075 ; lift Z
G1 X100.845 Y103.021 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.213 Y103.148 E0.01802 ; perimeter
G1 X101.547 Y103.318 E0.01738 ; perimeter
G1 X101.760 Y103.471 E0.01213 ; perimeter
G1 X101.836 Y103.608 E0.00723 ; perimeter
G1 X101.868 Y103.726 E0.00570 ; perimeter
G1 X101.865 Y103.804 E0.00359 ; perimeter
G1 X101.799 Y103.962 E0.00792 ; perimeter
G1 X101.545 Y104.116 E0.01377 ; perimeter
G1 X101.128 Y104.127 E0.01933 ; perimeter
G1 X101.028 Y104.089 E0.00493 ; perimeter
G1 X100.862 Y103.925 E0.01083 ; perimeter
G1 X100.705 Y103.475 E0.02206 ; perimeter
G1 X100.705 Y102.780 E0.03223 ; perimeter
G1 X100.529 Y102.237 E0.02644 ; perimeter
G1 X100.377 Y101.905 E0.01690 ; perimeter
G1 X100.251 Y101.555 E0.01723 ; perimeter
G1 X100.189 Y101.056 E0.02327 ; perimeter
G1 X100.189 Y100.727 E0.01528 ; perimeter
G1 X100.138 Y100.215 E0.02380 ; perimeter
G1 X100.141 Y100.013 E0.00938 ; perimeter
G1 X100.196 Y99.738 E0.01300 ; perimeter
G1 X100.372 Y99.442 E0.01597 ; perimeter
G1 X100.517 Y99.317 E0.00885 ; perimeter
G1 X100.625 Y99.375 E0.00566 ; perimeter
G1 X100.778 Y99.573 E0.01160 ; perimeter
G1 X100.923 Y99.866 E0.01515 ; perimeter
G1 X100.966 Y100.125 E0.01217 ; perimeter
G1 X100.989 Y100.718 E0.02750 ; perimeter
G1 X100.910 Y101.664 E0.04395 ; perimeter
G1 X100.677 Y102.405 E0.03599 ; perimeter
G1 X100.796 Y102.705 E0.01494 ; perimeter
G1 X100.836 Y102.962 E0.01206 ; perimeter
G1 X100.794 Y103.407 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.213 Y103.148 E-0.11092 ; wipe and retract
G1 X101.547 Y103.318 E-0.09902 ; wipe and retract
G1 X101.760 Y103.471 E-0.06909 ; wipe and retract
G1 X101.836 Y103.608 E-0.04122 ; wipe and retract
G1 X101.868 Y103.726 E-0.03245 ; wipe and retract
G1 X101.865 Y103.804 E-0.02043 ; wipe and retract
G1 X101.799 Y103.962 E-0.04510 ; wipe and retract
G1 X101.545 Y104.116 E-0.07847 ; wipe and retract
G1 X101.128 Y104.127 E-0.11014 ; wipe and retract
G1 X101.028 Y104.089 E-0.02808 ; wipe and retract
G1 X100.862 Y103.925 E-0.06168 ; wipe and retract
G1 X100.705 Y103.475 E-0.12568 ; wipe and retract
G1 X100.705 Y102.780 E-0.18358 ; wipe and retract
G1 X100.529 Y102.237 E-0.15062 ; wipe and retract
G1 X100.377 Y101.905 E-0.09627 ; wipe and retract
G1 X100.251 Y101.555 E-0.09815 ; wipe and retract
G1 X100.189 Y101.056 E-0.13259 ; wipe and retract
G1 X100.189 Y100.727 E-0.08705 ; wipe and retract
G1 X100.138 Y100.215 E-0.13556 ; wipe and retract
G1 X100.141 Y100.013 E-0.05345 ; wipe and retract
G1 X100.196 Y99.738 E-0.07404 ; wipe and retract
G1 X100.372 Y99.442 E-0.09096 ; wipe and retract
G1 X100.517 Y99.317 E-0.05039 ; wipe and retract
G1 X100.625 Y99.375 E-0.03223 ; wipe and retract
G1 X100.778 Y99.573 E-0.06608 ; wipe and retract
G1 X100.923 Y99.866 E-0.08633 ; wipe and retract
G1 X100.966 Y100.125 E-0.06930 ; wipe and retract
G1 X100.973 Y100.319 E-0.05110 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X100.844 Y98.173 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.829 Y97.751 E0.01956 ; perimeter
G1 X100.799 Y97.550 E0.00943 ; perimeter
G1 X100.818 Y97.386 E0.00764 ; perimeter
G1 X100.793 Y97.199 E0.00873 ; perimeter
G1 X100.915 Y96.850 E0.01714 ; perimeter
G1 X101.077 Y96.549 E0.01582 ; perimeter
G1 X101.302 Y96.288 E0.01596 ; perimeter
G1 X101.730 Y95.975 E0.02457 ; perimeter
G1 X101.877 Y95.815 E0.01006 ; perimeter
G1 X102.439 Y95.400 E0.03237 ; perimeter
G1 X102.796 Y95.172 E0.01961 ; perimeter
G1 X103.348 Y94.991 E0.02691 ; perimeter
G1 X104.775 Y94.845 E0.06644 ; perimeter
G1 X104.997 Y94.848 E0.01031 ; perimeter
G1 X105.569 Y94.920 E0.02670 ; perimeter
G1 X105.744 Y94.884 E0.00828 ; perimeter
G1 X106.473 Y94.860 E0.03376 ; perimeter
G1 X107.508 Y95.069 E0.04893 ; perimeter
G1 X108.055 Y95.223 E0.02632 ; perimeter
G1 X108.496 Y95.399 E0.02200 ; perimeter
G1 X108.734 Y95.564 E0.01341 ; perimeter
G1 X108.772 Y95.688 E0.00602 ; perimeter
G1 X108.898 Y95.775 E0.00707 ; perimeter
G1 X108.884 Y95.931 E0.00723 ; perimeter
G1 X108.781 Y95.889 E0.00516 ; perimeter
G1 X108.391 Y95.972 E0.01848 ; perimeter
G1 X108.229 Y95.979 E0.00751 ; perimeter
G1 X108.033 Y96.053 E0.00969 ; perimeter
G1 X107.816 Y96.056 E0.01003 ; perimeter
G1 X107.664 Y96.090 E0.00724 ; perimeter
G1 X107.457 Y96.061 E0.00967 ; perimeter
G1 X107.192 Y95.958 E0.01316 ; perimeter
G1 X106.715 Y95.708 E0.02497 ; perimeter
G1 X106.151 Y95.567 E0.02692 ; perimeter
G1 X105.892 Y95.565 E0.01200 ; perimeter
G1 X105.703 Y95.518 E0.00902 ; perimeter
G1 X105.151 Y95.607 E0.02592 ; perimeter
G1 X105.012 Y95.665 E0.00696 ; perimeter
G1 X103.476 Y95.748 E0.07128 ; perimeter
G1 X102.960 Y95.967 E0.02595 ; perimeter
G1 X102.194 Y96.543 E0.04441 ; perimeter
G1 X101.917 Y96.897 E0.02082 ; perimeter
G1 X101.709 Y97.123 E0.01419 ; perimeter
G1 X101.625 Y97.276 E0.00812 ; perimeter
G1 X101.265 Y97.662 E0.02443 ; perimeter
G1 X101.182 Y97.815 E0.00808 ; perimeter
G1 X101.047 Y97.984 E0.01001 ; perimeter
G1 X100.888 Y98.132 E0.01006 ; perimeter
G1 X100.935 Y97.784 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.829 Y97.751 E-0.10179 ; wipe and retract
G1 X100.799 Y97.550 E-0.05375 ; wipe and retract
G1 X100.818 Y97.386 E-0.04355 ; wipe and retract
G1 X100.793 Y97.199 E-0.04973 ; wipe and retract
G1 X100.915 Y96.850 E-0.09766 ; wipe and retract
G1 X101.077 Y96.549 E-0.09014 ; wipe and retract
G1 X101.302 Y96.288 E-0.09091 ; wipe and retract
G1 X101.730 Y95.975 E-0.13997 ; wipe and retract
G1 X101.877 Y95.815 E-0.05732 ; wipe and retract
G1 X102.439 Y95.400 E-0.18438 ; wipe and retract
G1 X102.796 Y95.172 E-0.11170 ; wipe and retract
G1 X103.348 Y94.991 E-0.15330 ; wipe and retract
G1 X104.775 Y94.845 E-0.37852 ; wipe and retract
G1 X104.997 Y94.848 E-0.05871 ; wipe and retract
G1 X105.569 Y94.920 E-0.15208 ; wipe and retract
G1 X105.744 Y94.884 E-0.04720 ; wipe and retract
G1 X106.473 Y94.860 E-0.19235 ; wipe and retract
G1 X107.501 Y95.068 E-0.27695 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X109.309 Y96.102 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.654 Y96.126 E0.01599 ; perimeter
G1 X110.015 Y96.290 E0.01838 ; perimeter
G1 X110.272 Y96.496 E0.01525 ; perimeter
G1 X110.554 Y96.816 E0.01975 ; perimeter
G1 X111.015 Y97.199 E0.02777 ; perimeter
G1 X111.117 Y97.261 E0.00555 ; perimeter
G1 X111.368 Y97.515 E0.01655 ; perimeter
G1 X111.462 Y97.729 E0.01079 ; perimeter
G1 X111.469 Y97.927 E0.00922 ; perimeter
G1 X111.444 Y97.972 E0.00237 ; perimeter
G1 X111.381 Y98.019 E0.00362 ; perimeter
G1 X111.186 Y98.044 E0.00913 ; perimeter
G1 X110.967 Y98.020 E0.01019 ; perimeter
G1 X110.650 Y97.930 E0.01528 ; perimeter
G1 X110.454 Y97.822 E0.01035 ; perimeter
G1 X110.268 Y97.762 E0.00906 ; perimeter
G1 X110.000 Y97.583 E0.01491 ; perimeter
G1 X109.890 Y97.472 E0.00722 ; perimeter
G1 X109.797 Y97.340 E0.00750 ; perimeter
G1 X109.650 Y96.991 E0.01753 ; perimeter
G1 X109.690 Y96.885 E0.00525 ; perimeter
G1 X109.559 Y96.667 E0.01180 ; perimeter
G1 X109.534 Y96.567 E0.00477 ; perimeter
G1 X109.443 Y96.410 E0.00840 ; perimeter
G1 X109.365 Y96.124 E0.01373 ; perimeter
G1 X109.624 Y96.242 F10800.000 ; move inwards before travel
G1 X109.760 Y96.473 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.178488
G1 F2400.000
G1 X109.852 Y96.555 E0.00139 ; infill
;WIDTH:0.224723
G1 X109.939 Y96.654 E0.00200 ; infill
;WIDTH:0.270958
G1 X110.026 Y96.754 E0.00250 ; infill
;WIDTH:0.281097
G1 X110.059 Y96.799 E0.00112 ; infill
;WIDTH:0.322893
G1 X110.210 Y97.167 E0.00924 ; infill
;WIDTH:0.364691
G1 X110.361 Y97.534 E0.01062 ; infill
G1 X111.195 Y97.719 F10800.000 ; move to first infill point
;WIDTH:0.377147
G1 F2400.000
G1 X110.806 Y97.550 E0.01179 ; infill
G1 X110.540 Y97.383 E0.00874 ; infill
;WIDTH:0.479981
G1 X110.241 Y97.162 E0.01348 ; infill
G1 X109.994 Y96.783 E0.01646 ; infill
;WIDTH:0.457669
G1 X109.785 Y96.450 E0.01353 ; infill
G1 X108.481 Y95.706 F10800.000 ; move to first infill point
;WIDTH:0.169754
G1 F2400.000
G1 X107.849 Y95.524 E0.00694 ; infill
G1 X107.339 Y95.503 F10800.000 ; move to first infill point
;WIDTH:0.429076
G1 F2400.000
G1 X107.102 Y95.423 E0.00802 ; infill
;WIDTH:0.389728
G1 X106.866 Y95.342 E0.00720 ; infill
;WIDTH:0.350378
G1 X106.429 Y95.241 E0.01146 ; infill
;WIDTH:0.326528
G1 X106.286 Y95.222 E0.00340 ; infill
;WIDTH:0.295281
G1 X106.209 Y95.214 E0.00162 ; infill
;WIDTH:0.272115
G1 X105.935 Y95.220 E0.00522 ; infill
;WIDTH:0.252043
G1 X105.786 Y95.206 E0.00261 ; infill
G1 X105.476 Y95.151 F10800.000 ; move to first infill point
;WIDTH:0.383515
G1 F2400.000
G1 X104.919 Y95.258 E0.01604 ; infill
G1 X104.111 Y95.314 E0.02296 ; infill
;WIDTH:0.359104
G1 X103.428 Y95.368 E0.01800 ; infill
;WIDTH:0.325985
G1 X102.967 Y95.533 E0.01153 ; infill
G1 X102.785 Y95.629 E0.00484 ; infill
G1 X102.136 Y96.104 E0.01892 ; infill
G1 X101.984 Y96.241 E0.00483 ; infill
;WIDTH:0.29523
G1 X101.705 Y96.501 E0.00800 ; infill
;WIDTH:0.423298
G1 X101.432 Y96.793 E0.01264 ; infill
;WIDTH:0.415996
G1 X101.383 Y96.862 E0.00262 ; infill
;WIDTH:0.395053
G1 X101.079 Y97.499 E0.02069 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.383 Y96.862 E-0.18646 ; wipe and retract
;WIPE_END
G1 E-2.21354 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X100.551 Y99.673 ; move to first infill point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.369239
G1 F2400.000
G1 X100.545 Y100.056 E0.01039 ; infill
G1 X100.588 Y100.699 E0.01747 ; infill
;WIDTH:0.36067
G1 X100.575 Y101.032 E0.00883 ; infill
;WIDTH:0.333539
G1 X100.583 Y101.401 E0.00892 ; infill
;WIDTH:0.287501
G1 X100.590 Y101.771 E0.00751 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.583 Y101.401 E-0.09740 ; wipe and retract
;WIPE_END
G1 E-2.30260 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X113.687 Y101.076 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.761 Y101.002 E0.00488 ; perimeter
G1 X113.831 Y100.977 E0.00345 ; perimeter
G1 X113.944 Y100.971 E0.00522 ; perimeter
G1 X114.132 Y101.042 E0.00934 ; perimeter
G1 X114.237 Y101.137 E0.00653 ; perimeter
G1 X114.348 Y101.292 E0.00883 ; perimeter
G1 X114.463 Y101.570 E0.01391 ; perimeter
G1 X114.492 Y101.943 E0.01738 ; perimeter
G1 X114.480 Y102.021 E0.00364 ; perimeter
G1 X114.346 Y102.256 E0.01252 ; perimeter
G1 X114.244 Y102.276 E0.00483 ; perimeter
G1 X114.189 Y102.226 E0.00346 ; perimeter
G1 X113.992 Y102.150 E0.00977 ; perimeter
G1 X113.755 Y101.905 E0.01580 ; perimeter
G1 X113.623 Y101.634 E0.01398 ; perimeter
G1 X113.600 Y101.404 E0.01069 ; perimeter
G1 X113.672 Y101.134 E0.01293 ; perimeter
G1 X113.792 Y101.080 F10800.000 ; move inwards before travel
G1 X113.886 Y101.264 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.265789
G1 F2400.000
G1 X114.206 Y101.974 E0.01443 ; infill
G1 X114.141 Y101.949 F10800.000 ; move to first infill point
;WIDTH:0.349525
G1 F2400.000
G1 X114.070 Y101.651 E0.00781 ; infill
G1 X114.024 Y101.550 E0.00283 ; infill
G1 X113.934 Y101.225 E0.00859 ; infill
G1 X113.928 Y101.223 F10800.000 ; move to first infill point
;WIDTH:0.239957
G1 F2400.000
G1 X113.950 Y101.298 E0.00128 ; infill
;WIDTH:0.2651
G1 X113.973 Y101.373 E0.00144 ; infill
;WIDTH:0.310297
G1 X114.066 Y101.880 E0.01146 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.973 Y101.373 E-0.13607 ; wipe and retract
;WIPE_END
G1 E-2.26393 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X115.362 Y104.999 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.485 Y105.015 E0.00577 ; perimeter
G1 X115.633 Y105.071 E0.00732 ; perimeter
G1 X115.773 Y105.209 E0.00909 ; perimeter
G1 X115.798 Y105.255 E0.00244 ; perimeter
G1 X115.828 Y105.576 E0.01493 ; perimeter
G1 X115.767 Y105.747 E0.00839 ; perimeter
G1 X115.645 Y105.864 E0.00787 ; perimeter
G1 X115.480 Y105.918 E0.00800 ; perimeter
G1 X115.370 Y105.912 E0.00510 ; perimeter
G1 X115.244 Y105.857 E0.00639 ; perimeter
G1 X115.172 Y105.798 E0.00429 ; perimeter
G1 X115.070 Y105.642 E0.00867 ; perimeter
G1 X115.026 Y105.455 E0.00888 ; perimeter
G1 X115.076 Y105.226 E0.01087 ; perimeter
G1 X115.201 Y105.072 E0.00917 ; perimeter
G1 X115.307 Y105.024 E0.00540 ; perimeter
G1 X115.438 Y105.097 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.485 Y105.015 E-0.04708 ; wipe and retract
G1 X115.633 Y105.071 E-0.04169 ; wipe and retract
G1 X115.773 Y105.209 E-0.05177 ; wipe and retract
G1 X115.798 Y105.255 E-0.01391 ; wipe and retract
G1 X115.828 Y105.576 E-0.08508 ; wipe and retract
G1 X115.767 Y105.747 E-0.04778 ; wipe and retract
G1 X115.645 Y105.864 E-0.04482 ; wipe and retract
G1 X115.480 Y105.918 E-0.04558 ; wipe and retract
G1 X115.370 Y105.912 E-0.02905 ; wipe and retract
G1 X115.244 Y105.857 E-0.03641 ; wipe and retract
G1 X115.172 Y105.798 E-0.02444 ; wipe and retract
G1 X115.070 Y105.642 E-0.04941 ; wipe and retract
G1 X115.026 Y105.455 E-0.05057 ; wipe and retract
G1 X115.076 Y105.226 E-0.06192 ; wipe and retract
G1 X115.201 Y105.072 E-0.05223 ; wipe and retract
G1 X115.307 Y105.024 E-0.03076 ; wipe and retract
;WIPE_END
G1 E-1.68749 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X115.802 Y111.493 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.760 Y111.570 E0.00408 ; perimeter
G1 X115.675 Y111.630 E0.00480 ; perimeter
G1 X115.456 Y111.650 E0.01021 ; perimeter
G1 X115.286 Y111.569 E0.00869 ; perimeter
G1 X115.214 Y111.453 E0.00635 ; perimeter
G1 X115.171 Y111.266 E0.00890 ; perimeter
G1 X115.188 Y111.102 E0.00761 ; perimeter
G1 X115.170 Y111.041 E0.00298 ; perimeter
G1 X115.277 Y110.827 E0.01105 ; perimeter
G1 X115.479 Y110.725 E0.01051 ; perimeter
G1 X115.606 Y110.723 E0.00586 ; perimeter
G1 X115.705 Y110.761 E0.00490 ; perimeter
G1 X115.791 Y110.851 E0.00577 ; perimeter
G1 X115.879 Y111.098 E0.01215 ; perimeter
G1 X115.868 Y111.324 E0.01044 ; perimeter
G1 X115.824 Y111.437 E0.00564 ; perimeter
G1 X115.715 Y111.504 F10800.000 ; move inwards before travel
G1 X115.544 Y110.965 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.257415
G1 F2400.000
G1 X115.523 Y111.244 E0.00499 ; infill
G1 X115.537 Y111.400 E0.00280 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.523 Y111.244 E-0.04142 ; wipe and retract
G1 X115.544 Y110.965 E-0.07390 ; wipe and retract
;WIPE_END
G1 E-2.28468 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X113.212 Y112.915 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.205 Y113.001 E0.00399 ; perimeter
G1 X113.141 Y113.167 E0.00822 ; perimeter
G1 X113.101 Y113.206 E0.00261 ; perimeter
G1 X112.884 Y113.289 E0.01076 ; perimeter
G1 X112.654 Y113.277 E0.01065 ; perimeter
G1 X112.469 Y113.209 E0.00915 ; perimeter
G1 X112.313 Y113.091 E0.00906 ; perimeter
G1 X112.218 Y112.954 E0.00772 ; perimeter
G1 X112.178 Y112.789 E0.00783 ; perimeter
G1 X112.194 Y112.672 E0.00551 ; perimeter
G1 X112.250 Y112.572 E0.00526 ; perimeter
G1 X112.309 Y112.526 E0.00349 ; perimeter
G1 X112.387 Y112.478 E0.00426 ; perimeter
G1 X112.714 Y112.456 E0.01517 ; perimeter
G1 X112.865 Y112.501 E0.00732 ; perimeter
G1 X113.043 Y112.615 E0.00979 ; perimeter
G1 X113.170 Y112.791 E0.01004 ; perimeter
G1 X113.192 Y112.858 E0.00328 ; perimeter
G1 X113.143 Y112.967 F10800.000 ; move inwards before travel
G1 X113.853 Y114.581 ; move to first perimeter point
G1 F1800.000
G1 X114.015 Y114.493 E0.00854 ; perimeter
G1 X114.192 Y114.453 E0.00842 ; perimeter
G1 X114.988 Y114.611 E0.03761 ; perimeter
G1 X115.445 Y114.639 E0.02118 ; perimeter
G1 X115.609 Y114.726 E0.00860 ; perimeter
G1 X115.718 Y114.912 E0.01000 ; perimeter
G1 X115.743 Y115.017 E0.00502 ; perimeter
G1 X115.728 Y115.102 E0.00401 ; perimeter
G1 X115.631 Y115.288 E0.00973 ; perimeter
G1 X115.571 Y115.345 E0.00383 ; perimeter
G1 X115.467 Y115.394 E0.00532 ; perimeter
G1 X115.298 Y115.410 E0.00786 ; perimeter
G1 X115.063 Y115.368 E0.01106 ; perimeter
G1 X114.727 Y115.272 E0.01617 ; perimeter
G1 X114.231 Y115.298 E0.02300 ; perimeter
G1 X113.976 Y115.266 E0.01193 ; perimeter
G1 X113.852 Y115.201 E0.00649 ; perimeter
G1 X113.773 Y115.113 E0.00548 ; perimeter
G1 X113.715 Y114.947 E0.00813 ; perimeter
G1 X113.730 Y114.794 E0.00711 ; perimeter
G1 X113.812 Y114.625 E0.00868 ; perimeter
G1 X114.028 Y114.638 F10800.000 ; move inwards before travel
G1 X114.099 Y114.901 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.337156
G1 F2400.000
G1 X114.111 Y114.892 E0.00036 ; infill
;WIDTH:0.352857
G1 X114.122 Y114.885 E0.00034 ; infill
;WIDTH:0.372189
G1 X114.454 Y114.899 E0.00909 ; infill
;WIDTH:0.261865
G1 X114.785 Y114.926 E0.00604 ; infill
;WIDTH:0.27365
G1 X114.950 Y114.965 E0.00326 ; infill
;WIDTH:0.316981
G1 X115.148 Y115.000 E0.00458 ; infill
;WIDTH:0.335743
G1 X115.334 Y115.019 E0.00455 ; infill
G1 X114.099 Y114.901 F10800.000 ; move to first infill point
;WIDTH:0.315904
G1 F2400.000
G1 X114.085 Y114.919 E0.00053 ; infill
;WIDTH:0.276597
G1 X114.039 Y114.958 E0.00117 ; infill
;WIDTH:0.229916
G1 X113.993 Y114.998 E0.00094 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.039 Y114.958 E-0.01588 ; wipe and retract
;WIPE_END
G1 E-2.38412 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X108.357 Y109.717 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.236 Y109.873 E0.00910 ; perimeter
G1 X108.067 Y109.948 E0.00857 ; perimeter
G1 X107.926 Y109.953 E0.00656 ; perimeter
G1 X107.806 Y109.924 E0.00570 ; perimeter
G1 X107.642 Y109.785 E0.00993 ; perimeter
G1 X107.571 Y109.579 E0.01010 ; perimeter
G1 X107.625 Y109.328 E0.01188 ; perimeter
G1 X107.773 Y109.186 E0.00954 ; perimeter
G1 X107.952 Y109.133 E0.00861 ; perimeter
G1 X108.195 Y109.187 E0.01154 ; perimeter
G1 X108.289 Y109.257 E0.00541 ; perimeter
G1 X108.365 Y109.360 E0.00595 ; perimeter
G1 X108.393 Y109.551 E0.00894 ; perimeter
G1 X108.369 Y109.659 E0.00509 ; perimeter
G1 X108.161 Y109.732 F10800.000 ; move inwards before travel
G1 X107.981 Y109.554 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.358027
G1 F2400.000
G1 X107.987 Y109.542 E0.00034 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.981 Y109.554 E-0.00342 ; wipe and retract
;WIPE_END
G1 E-2.39658 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 X104.213 Y106.545 ; move to first perimeter point
G1 Z25.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.318 Y106.544 E0.00485 ; perimeter
G1 X104.554 Y106.710 E0.01338 ; perimeter
G1 X105.009 Y107.120 E0.02837 ; perimeter
G1 X105.192 Y107.249 E0.01035 ; perimeter
G1 X105.502 Y107.547 E0.01992 ; perimeter
G1 X105.668 Y107.769 E0.01283 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.720 Y107.886 E0.00537 ; perimeter (bridge)
G1 X105.611 Y107.930 E0.00494 ; perimeter (bridge)
G1 X105.571 Y107.927 E0.00166 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.115 Y107.838 E0.02153 ; perimeter
G1 X104.876 Y107.747 E0.01186 ; perimeter
G1 X104.462 Y107.638 E0.01983 ; perimeter
G1 X104.012 Y107.439 E0.02278 ; perimeter
G1 X103.754 Y107.215 E0.01582 ; perimeter
G1 X103.724 Y107.166 E0.00269 ; perimeter
G1 X103.680 Y106.995 E0.00816 ; perimeter
G1 X103.682 Y106.814 E0.00838 ; perimeter
G1 X103.838 Y106.661 E0.01014 ; perimeter
G1 X104.155 Y106.558 E0.01542 ; perimeter
G1 X104.280 Y106.626 F10800.000 ; move inwards before travel
G1 X105.010 Y107.540 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.381609
G1 F2400.000
G1 X104.199 Y107.014 E0.02722 ; infill
G1 X104.230 Y106.788 E0.00641 ; infill
;LAYER_CHANGE
;Z:25.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;25.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.199 Y107.014 E-0.06010 ; wipe and retract
G1 X105.010 Y107.540 E-0.25509 ; wipe and retract
;WIPE_END
G1 E-2.08481 F2400.000 ; retract
G1 Z25.075 F10800.000 ; lift Z
G1 Z25.200 ; move to next layer (125)
;AFTER_LAYER_CHANGE
;25.2
G1 Z25.275 ; lift Z
G1 X107.617 Y109.216 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.751 Y109.109 E0.00791 ; perimeter
G1 X107.922 Y109.087 E0.00800 ; perimeter
G1 X108.199 Y109.139 E0.01304 ; perimeter
G1 X108.281 Y109.198 E0.00469 ; perimeter
G1 X108.367 Y109.318 E0.00685 ; perimeter
G1 X108.400 Y109.545 E0.01061 ; perimeter
G1 X108.366 Y109.687 E0.00677 ; perimeter
G1 X108.258 Y109.817 E0.00783 ; perimeter
G1 X108.075 Y109.903 E0.00935 ; perimeter
G1 X107.921 Y109.907 E0.00713 ; perimeter
G1 X107.805 Y109.875 E0.00555 ; perimeter
G1 X107.614 Y109.715 E0.01156 ; perimeter
G1 X107.588 Y109.667 E0.00251 ; perimeter
G1 X107.541 Y109.461 E0.00980 ; perimeter
G1 X107.563 Y109.318 E0.00669 ; perimeter
G1 X107.589 Y109.269 E0.00259 ; perimeter
G1 X107.785 Y109.245 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.751 Y109.109 E-0.05996 ; wipe and retract
G1 X107.922 Y109.087 E-0.04557 ; wipe and retract
G1 X108.199 Y109.139 E-0.07431 ; wipe and retract
G1 X108.281 Y109.198 E-0.02671 ; wipe and retract
G1 X108.367 Y109.318 E-0.03901 ; wipe and retract
G1 X108.400 Y109.545 E-0.06047 ; wipe and retract
G1 X108.366 Y109.687 E-0.03859 ; wipe and retract
G1 X108.258 Y109.817 E-0.04460 ; wipe and retract
G1 X108.075 Y109.903 E-0.05328 ; wipe and retract
G1 X107.921 Y109.907 E-0.04063 ; wipe and retract
G1 X107.805 Y109.875 E-0.03164 ; wipe and retract
G1 X107.614 Y109.715 E-0.06588 ; wipe and retract
G1 X107.588 Y109.667 E-0.01428 ; wipe and retract
G1 X107.541 Y109.461 E-0.05582 ; wipe and retract
G1 X107.563 Y109.318 E-0.03813 ; wipe and retract
G1 X107.589 Y109.269 E-0.01477 ; wipe and retract
;WIPE_END
G1 E-1.69635 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X103.747 Y106.761 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.994 Y106.531 E0.01566 ; perimeter
G1 X104.204 Y106.457 E0.01029 ; perimeter
G1 X104.353 Y106.476 E0.00698 ; perimeter
G1 X104.577 Y106.632 E0.01262 ; perimeter
G1 X104.620 Y106.691 E0.00339 ; perimeter
G1 X105.135 Y107.130 E0.03133 ; perimeter
G1 X105.708 Y107.535 E0.03251 ; perimeter
G1 X105.966 Y107.769 E0.01615 ; perimeter
G1 X106.224 Y108.068 E0.01830 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.272 Y108.166 E0.00455 ; perimeter (bridge)
G1 X106.272 Y108.232 E0.00273 ; perimeter (bridge)
G1 X106.173 Y108.251 E0.00425 ; perimeter (bridge)
G1 X106.079 Y108.241 E0.00393 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.903 Y108.222 E0.00819 ; perimeter
G1 X105.456 Y108.093 E0.02159 ; perimeter
G1 X104.419 Y107.639 E0.05243 ; perimeter
G1 X104.152 Y107.471 E0.01460 ; perimeter
G1 X103.874 Y107.237 E0.01685 ; perimeter
G1 X103.796 Y107.110 E0.00687 ; perimeter
G1 X103.746 Y106.821 E0.01359 ; perimeter
G1 X104.084 Y106.740 F10800.000 ; move inwards before travel
G1 X104.225 Y106.940 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.470883
G1 F2400.000
G1 X104.274 Y106.982 E0.00229 ; infill
;WIDTH:0.374462
G1 X104.621 Y107.258 E0.01223 ; infill
G1 X104.894 Y107.429 E0.00888 ; infill
;WIDTH:0.27735
G1 X105.310 Y107.664 E0.00932 ; infill
;WIDTH:0.183548
G1 X105.710 Y107.906 E0.00546 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.310 Y107.664 E-0.12328 ; wipe and retract
;WIPE_END
G1 E-2.27672 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X101.946 Y103.968 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.672 Y104.156 E0.01543 ; perimeter
G1 X101.321 Y104.147 E0.01626 ; perimeter
G1 X101.151 Y104.090 E0.00831 ; perimeter
G1 X101.012 Y103.967 E0.00859 ; perimeter
G1 X100.943 Y103.844 E0.00652 ; perimeter
G1 X100.864 Y103.582 E0.01269 ; perimeter
G1 X100.903 Y103.353 E0.01076 ; perimeter
G1 X100.934 Y103.309 E0.00249 ; perimeter
G1 X100.973 Y103.314 E0.00186 ; perimeter
G1 X101.090 Y103.259 E0.00600 ; perimeter
G1 X101.222 Y103.297 E0.00634 ; perimeter
G1 X101.443 Y103.275 E0.01029 ; perimeter
G1 X101.767 Y103.382 E0.01582 ; perimeter
G1 X101.890 Y103.471 E0.00701 ; perimeter
G1 X101.958 Y103.577 E0.00585 ; perimeter
G1 X102.000 Y103.796 E0.01032 ; perimeter
G1 X101.964 Y103.910 E0.00554 ; perimeter
G1 X101.616 Y103.923 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.672 Y104.156 E-0.10081 ; wipe and retract
G1 X101.321 Y104.147 E-0.09262 ; wipe and retract
G1 X101.151 Y104.090 E-0.04733 ; wipe and retract
G1 X101.012 Y103.967 E-0.04891 ; wipe and retract
G1 X100.943 Y103.844 E-0.03712 ; wipe and retract
G1 X100.864 Y103.582 E-0.07231 ; wipe and retract
G1 X100.903 Y103.353 E-0.06131 ; wipe and retract
G1 X100.934 Y103.309 E-0.01421 ; wipe and retract
G1 X100.973 Y103.314 E-0.01060 ; wipe and retract
G1 X101.090 Y103.259 E-0.03418 ; wipe and retract
G1 X101.222 Y103.297 E-0.03613 ; wipe and retract
G1 X101.443 Y103.275 E-0.05865 ; wipe and retract
G1 X101.767 Y103.382 E-0.09011 ; wipe and retract
G1 X101.890 Y103.471 E-0.03996 ; wipe and retract
G1 X101.958 Y103.577 E-0.03331 ; wipe and retract
G1 X102.000 Y103.796 E-0.05880 ; wipe and retract
G1 X101.964 Y103.910 E-0.03156 ; wipe and retract
;WIPE_END
G1 E-1.53208 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X100.664 Y101.663 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.538 Y101.736 E0.00673 ; perimeter
G1 X100.502 Y101.711 E0.00202 ; perimeter
G1 X100.260 Y101.200 E0.02620 ; perimeter
G1 X100.185 Y100.674 E0.02460 ; perimeter
G1 X100.176 Y100.086 E0.02723 ; perimeter
G1 X100.238 Y99.791 E0.01397 ; perimeter
G1 X100.420 Y99.589 E0.01263 ; perimeter
G1 X100.664 Y99.517 E0.01179 ; perimeter
G1 X100.791 Y99.555 E0.00609 ; perimeter
G1 X100.895 Y99.691 E0.00797 ; perimeter
G1 X100.982 Y99.885 E0.00984 ; perimeter
G1 X101.026 Y100.142 E0.01209 ; perimeter
G1 X101.035 Y100.371 E0.01059 ; perimeter
G1 X101.015 Y100.537 E0.00776 ; perimeter
G1 X100.960 Y100.695 E0.00774 ; perimeter
G1 X100.926 Y101.130 E0.02023 ; perimeter
G1 X100.737 Y101.498 E0.01915 ; perimeter
G1 X100.695 Y101.616 E0.00580 ; perimeter
G1 X100.526 Y101.616 F10800.000 ; move inwards before travel
G1 X100.593 Y101.250 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.296226
G1 F2400.000
G1 X100.583 Y100.947 E0.00639 ; infill
;WIDTH:0.340013
G1 X100.574 Y100.633 E0.00774 ; infill
;WIDTH:0.354386
G1 X100.607 Y100.355 E0.00727 ; infill
G1 X100.576 Y99.791 E0.01462 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.607 Y100.355 E-0.14899 ; wipe and retract
G1 X100.574 Y100.633 E-0.07407 ; wipe and retract
;WIPE_END
G1 E-2.17695 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X107.437 Y95.651 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X107.520 Y95.668 E0.00288 ; perimeter
G1 X107.494 Y95.669 E0.00089 ; perimeter
G1 X108.415 Y95.775 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.325 Y95.798 E0.00434 ; perimeter
G1 X108.095 Y95.988 E0.01381 ; perimeter
G1 X107.896 Y96.077 E0.01010 ; perimeter
G1 X107.548 Y96.153 E0.01649 ; perimeter
G1 X107.398 Y96.147 E0.00697 ; perimeter
G1 X107.160 Y96.068 E0.01161 ; perimeter
G1 X107.105 Y96.004 E0.00391 ; perimeter
G1 X106.695 Y95.713 E0.02328 ; perimeter
G1 X106.248 Y95.620 E0.02114 ; perimeter
G1 X105.752 Y95.612 E0.02299 ; perimeter
G1 X105.270 Y95.670 E0.02250 ; perimeter
G1 X104.695 Y95.691 E0.02664 ; perimeter
G1 X104.604 Y95.665 E0.00440 ; perimeter
G1 X104.228 Y95.671 E0.01742 ; perimeter
G1 X103.995 Y95.690 E0.01082 ; perimeter
G1 X103.544 Y95.773 E0.02126 ; perimeter
G1 X102.975 Y95.990 E0.02822 ; perimeter
G1 X102.149 Y96.605 E0.04767 ; perimeter
G1 X101.677 Y97.215 E0.03574 ; perimeter
G1 X101.215 Y97.727 E0.03197 ; perimeter
G1 X101.009 Y97.905 E0.01259 ; perimeter
G1 X100.955 Y97.791 E0.00586 ; perimeter
G1 X100.862 Y97.372 E0.01989 ; perimeter
G1 X100.872 Y97.253 E0.00551 ; perimeter
G1 X100.849 Y97.087 E0.00776 ; perimeter
G1 X100.992 Y96.728 E0.01792 ; perimeter
G1 X101.088 Y96.549 E0.00942 ; perimeter
G1 X101.468 Y96.178 E0.02455 ; perimeter
G1 X101.650 Y96.050 E0.01031 ; perimeter
G1 X102.136 Y95.623 E0.02998 ; perimeter
G1 X102.567 Y95.295 E0.02511 ; perimeter
G1 X102.766 Y95.179 E0.01065 ; perimeter
G1 X103.210 Y95.016 E0.02194 ; perimeter
G1 X103.732 Y94.952 E0.02434 ; perimeter
G1 X104.270 Y94.930 E0.02495 ; perimeter
G1 X104.979 Y94.842 E0.03308 ; perimeter
G1 X106.312 Y94.880 E0.06178 ; perimeter
G1 X106.642 Y94.946 E0.01557 ; perimeter
G1 X106.989 Y95.090 E0.01742 ; perimeter
G1 X107.271 Y95.159 E0.01342 ; perimeter
G1 X107.411 Y95.153 E0.00652 ; perimeter
G1 X107.884 Y95.252 E0.02237 ; perimeter
G1 X108.220 Y95.383 E0.01671 ; perimeter
G1 X108.431 Y95.547 E0.01238 ; perimeter
G1 X108.452 Y95.628 E0.00388 ; perimeter
G1 X108.417 Y95.715 E0.00432 ; perimeter
G1 X108.328 Y95.740 F10800.000 ; move inwards before travel
G1 X107.205 Y95.569 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.333019
G1 F2400.000
G1 X107.047 Y95.496 E0.00421 ; infill
;WIDTH:0.295224
G1 X106.888 Y95.424 E0.00366 ; infill
;WIDTH:0.257428
G1 X106.852 Y95.404 E0.00073 ; infill
;WIDTH:0.247095
G1 X106.534 Y95.302 E0.00568 ; infill
G1 X106.277 Y95.250 E0.00444 ; infill
G1 X105.723 Y95.236 E0.00940 ; infill
;WIDTH:0.350128
G1 X104.745 Y95.282 E0.02502 ; infill
G1 X104.678 Y95.276 F10800.000 ; move to first infill point
;WIDTH:0.34845
G1 F2400.000
G1 X104.633 Y95.276 E0.00114 ; infill
;WIDTH:0.336951
G1 X104.306 Y95.299 E0.00803 ; infill
;WIDTH:0.30197
G1 X103.939 Y95.319 E0.00791 ; infill
G1 X103.450 Y95.387 E0.01063 ; infill
G1 X103.308 Y95.420 E0.00314 ; infill
G1 X102.944 Y95.557 E0.00838 ; infill
G1 X102.762 Y95.649 E0.00438 ; infill
G1 X102.388 Y95.931 E0.01009 ; infill
G1 X101.900 Y96.326 E0.01352 ; infill
G1 X101.719 Y96.498 E0.00538 ; infill
;WIDTH:0.409237
G1 X101.445 Y96.805 E0.01255 ; infill
G1 X101.356 Y96.946 E0.00508 ; infill
;WIDTH:0.399215
G1 X101.231 Y97.143 E0.00690 ; infill
;WIDTH:0.362764
G1 X101.107 Y97.340 E0.00619 ; infill
G1 X101.127 Y97.454 F10800.000 ; move to first infill point
;WIDTH:0.232178
G1 F2400.000
G1 X101.484 Y96.485 E0.01625 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.127 Y97.454 E-0.27250 ; wipe and retract
;WIPE_END
G1 E-2.12750 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X110.166 Y97.235 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.177 Y97.166 E0.00238 ; perimeter
G1 X110.396 Y97.349 E0.00967 ; perimeter
G1 X110.185 Y97.289 E0.00742 ; perimeter
G1 X109.751 Y96.560 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.722 Y96.456 E0.00500 ; perimeter
G1 X109.953 Y96.436 E0.01072 ; perimeter
G1 X110.180 Y96.534 E0.01148 ; perimeter
G1 X110.389 Y96.678 E0.01176 ; perimeter
G1 X110.544 Y96.854 E0.01087 ; perimeter
G1 X110.859 Y97.099 E0.01848 ; perimeter
G1 X111.136 Y97.366 E0.01782 ; perimeter
G1 X111.251 Y97.600 E0.01208 ; perimeter
G1 X111.259 Y97.786 E0.00863 ; perimeter
G1 X111.237 Y97.831 E0.00233 ; perimeter
G1 X111.183 Y97.869 E0.00305 ; perimeter
G1 X110.993 Y97.918 E0.00910 ; perimeter
G1 X110.854 Y97.904 E0.00643 ; perimeter
G1 X110.716 Y97.922 E0.00648 ; perimeter
G1 X110.389 Y97.832 E0.01570 ; perimeter
G1 X110.319 Y97.836 E0.00324 ; perimeter
G1 X110.107 Y97.770 E0.01029 ; perimeter
G1 X110.022 Y97.768 E0.00394 ; perimeter
G1 X109.823 Y97.628 E0.01127 ; perimeter
G1 X109.721 Y97.480 E0.00833 ; perimeter
G1 X109.673 Y97.263 E0.01027 ; perimeter
G1 X109.700 Y97.091 E0.00810 ; perimeter
G1 X109.668 Y97.018 E0.00370 ; perimeter
G1 X109.738 Y96.831 E0.00927 ; perimeter
G1 X109.687 Y96.695 E0.00674 ; perimeter
G1 X109.725 Y96.615 E0.00411 ; perimeter
G1 X109.834 Y96.492 F10800.000 ; move inwards before travel
G1 X110.558 Y97.605 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.13765
G1 F2400.000
G1 X110.737 Y97.625 E0.00142 ; infill
G1 X110.856 Y97.615 E0.00094 ; infill
;WIDTH:0.149549
G1 X110.936 Y97.617 E0.00071 ; infill
G1 X111.004 Y97.666 E0.00075 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.936 Y97.617 E-0.02238 ; wipe and retract
G1 X110.856 Y97.615 E-0.02112 ; wipe and retract
;WIPE_END
G1 E-2.35649 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X113.699 Y101.232 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.813 Y101.161 E0.00622 ; perimeter
G1 X114.056 Y101.133 E0.01134 ; perimeter
G1 X114.134 Y101.156 E0.00380 ; perimeter
G1 X114.271 Y101.262 E0.00800 ; perimeter
G1 X114.386 Y101.393 E0.00810 ; perimeter
G1 X114.512 Y101.676 E0.01432 ; perimeter
G1 X114.604 Y102.308 E0.02958 ; perimeter
G1 X114.625 Y102.712 E0.01874 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.596 Y102.944 E0.00977 ; perimeter (bridge)
G1 X114.433 Y102.748 E0.01064 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.138 Y102.477 E0.01853 ; perimeter
G1 X114.082 Y102.383 E0.00511 ; perimeter
G1 X113.685 Y101.955 E0.02702 ; perimeter
G1 X113.563 Y101.657 E0.01490 ; perimeter
G1 X113.586 Y101.425 E0.01083 ; perimeter
G1 X113.657 Y101.371 E0.00411 ; perimeter
G1 X113.681 Y101.290 E0.00393 ; perimeter
G1 X113.826 Y101.276 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.813 Y101.161 E-0.04846 ; wipe and retract
G1 X114.056 Y101.133 E-0.06461 ; wipe and retract
G1 X114.134 Y101.156 E-0.02166 ; wipe and retract
G1 X114.271 Y101.262 E-0.04559 ; wipe and retract
G1 X114.386 Y101.393 E-0.04614 ; wipe and retract
G1 X114.512 Y101.676 E-0.08158 ; wipe and retract
G1 X114.604 Y102.308 E-0.16852 ; wipe and retract
G1 X114.625 Y102.712 E-0.10674 ; wipe and retract
;WIPE_END
G1 E-1.81670 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X115.326 Y104.892 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.515 Y104.915 E0.00882 ; perimeter
G1 X115.610 Y104.971 E0.00511 ; perimeter
G1 X115.732 Y105.083 E0.00766 ; perimeter
G1 X115.813 Y105.235 E0.00800 ; perimeter
G1 X115.831 Y105.476 E0.01118 ; perimeter
G1 X115.767 Y105.668 E0.00935 ; perimeter
G1 X115.630 Y105.798 E0.00875 ; perimeter
G1 X115.510 Y105.839 E0.00590 ; perimeter
G1 X115.369 Y105.836 E0.00651 ; perimeter
G1 X115.246 Y105.789 E0.00608 ; perimeter
G1 X115.144 Y105.701 E0.00627 ; perimeter
G1 X115.064 Y105.587 E0.00645 ; perimeter
G1 X115.020 Y105.399 E0.00892 ; perimeter
G1 X115.074 Y105.134 E0.01253 ; perimeter
G1 X115.278 Y104.878 E0.01512 ; perimeter
G1 X115.461 Y105.027 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.515 Y104.915 E-0.06339 ; wipe and retract
G1 X115.610 Y104.971 E-0.02909 ; wipe and retract
G1 X115.732 Y105.083 E-0.04362 ; wipe and retract
G1 X115.813 Y105.235 E-0.04558 ; wipe and retract
G1 X115.831 Y105.476 E-0.06370 ; wipe and retract
G1 X115.767 Y105.668 E-0.05328 ; wipe and retract
G1 X115.630 Y105.798 E-0.04984 ; wipe and retract
G1 X115.510 Y105.839 E-0.03360 ; wipe and retract
G1 X115.369 Y105.836 E-0.03711 ; wipe and retract
G1 X115.246 Y105.789 E-0.03466 ; wipe and retract
G1 X115.144 Y105.701 E-0.03574 ; wipe and retract
G1 X115.064 Y105.587 E-0.03676 ; wipe and retract
G1 X115.020 Y105.399 E-0.05083 ; wipe and retract
G1 X115.074 Y105.134 E-0.07138 ; wipe and retract
G1 X115.278 Y104.878 E-0.08616 ; wipe and retract
;WIPE_END
G1 E-1.66526 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X115.280 Y111.666 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.198 Y111.513 E0.00804 ; perimeter
G1 X115.156 Y111.286 E0.01067 ; perimeter
G1 X115.169 Y111.142 E0.00668 ; perimeter
G1 X115.284 Y110.911 E0.01199 ; perimeter
G1 X115.393 Y110.841 E0.00599 ; perimeter
G1 X115.567 Y110.814 E0.00816 ; perimeter
G1 X115.703 Y110.857 E0.00662 ; perimeter
G1 X115.793 Y110.950 E0.00597 ; perimeter
G1 X115.882 Y111.210 E0.01274 ; perimeter
G1 X115.879 Y111.375 E0.00765 ; perimeter
G1 X115.822 Y111.552 E0.00860 ; perimeter
G1 X115.759 Y111.665 E0.00598 ; perimeter
G1 X115.685 Y111.718 E0.00424 ; perimeter
G1 X115.452 Y111.750 E0.01090 ; perimeter
G1 X115.334 Y111.692 E0.00609 ; perimeter
G1 X115.321 Y111.497 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.198 Y111.513 E-0.05940 ; wipe and retract
G1 X115.156 Y111.286 E-0.06076 ; wipe and retract
G1 X115.169 Y111.142 E-0.03807 ; wipe and retract
G1 X115.284 Y110.911 E-0.06832 ; wipe and retract
G1 X115.393 Y110.841 E-0.03410 ; wipe and retract
G1 X115.567 Y110.814 E-0.04646 ; wipe and retract
G1 X115.703 Y110.857 E-0.03769 ; wipe and retract
G1 X115.793 Y110.950 E-0.03402 ; wipe and retract
G1 X115.882 Y111.210 E-0.07259 ; wipe and retract
G1 X115.879 Y111.375 E-0.04360 ; wipe and retract
G1 X115.822 Y111.552 E-0.04897 ; wipe and retract
G1 X115.759 Y111.665 E-0.03410 ; wipe and retract
G1 X115.685 Y111.718 E-0.02416 ; wipe and retract
G1 X115.452 Y111.750 E-0.06208 ; wipe and retract
G1 X115.334 Y111.692 E-0.03470 ; wipe and retract
;WIPE_END
G1 E-1.70097 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 X113.282 Y112.835 ; move to first perimeter point
G1 Z25.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.316 Y112.936 E0.00494 ; perimeter
G1 X113.316 Y113.070 E0.00623 ; perimeter
G1 X113.257 Y113.217 E0.00732 ; perimeter
G1 X113.171 Y113.288 E0.00517 ; perimeter
G1 X112.992 Y113.348 E0.00875 ; perimeter
G1 X112.811 Y113.340 E0.00838 ; perimeter
G1 X112.597 Y113.265 E0.01050 ; perimeter
G1 X112.429 Y113.141 E0.00972 ; perimeter
G1 X112.349 Y113.031 E0.00629 ; perimeter
G1 X112.286 Y112.825 E0.00997 ; perimeter
G1 X112.298 Y112.761 E0.00298 ; perimeter
G1 X112.385 Y112.604 E0.00831 ; perimeter
G1 X112.496 Y112.530 E0.00620 ; perimeter
G1 X112.757 Y112.499 E0.01219 ; perimeter
G1 X112.959 Y112.543 E0.00955 ; perimeter
G1 X113.176 Y112.680 E0.01193 ; perimeter
G1 X113.253 Y112.782 E0.00591 ; perimeter
G1 X113.226 Y112.926 F10800.000 ; move inwards before travel
G1 X113.950 Y114.533 ; move to first perimeter point
G1 F1800.000
G1 X114.048 Y114.481 E0.00513 ; perimeter
G1 X114.253 Y114.425 E0.00984 ; perimeter
G1 X115.033 Y114.589 E0.03696 ; perimeter
G1 X115.442 Y114.630 E0.01901 ; perimeter
G1 X115.622 Y114.727 E0.00949 ; perimeter
G1 X115.723 Y114.900 E0.00926 ; perimeter
G1 X115.748 Y115.010 E0.00521 ; perimeter
G1 X115.730 Y115.105 E0.00448 ; perimeter
G1 X115.641 Y115.273 E0.00882 ; perimeter
G1 X115.568 Y115.342 E0.00463 ; perimeter
G1 X115.468 Y115.387 E0.00509 ; perimeter
G1 X115.296 Y115.399 E0.00801 ; perimeter
G1 X114.948 Y115.345 E0.01630 ; perimeter
G1 X114.711 Y115.278 E0.01142 ; perimeter
G1 X114.364 Y115.295 E0.01607 ; perimeter
G1 X114.062 Y115.257 E0.01412 ; perimeter
G1 X113.918 Y115.176 E0.00763 ; perimeter
G1 X113.851 Y115.099 E0.00474 ; perimeter
G1 X113.791 Y114.938 E0.00797 ; perimeter
G1 X113.798 Y114.803 E0.00629 ; perimeter
G1 X113.861 Y114.637 E0.00819 ; perimeter
G1 X113.911 Y114.578 E0.00358 ; perimeter
G1 X114.053 Y114.573 F10800.000 ; move inwards before travel
G1 X114.184 Y114.881 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.383845
G1 F2400.000
G1 X114.269 Y114.858 E0.00250 ; infill
G1 X114.556 Y114.891 E0.00817 ; infill
;WIDTH:0.349346
G1 X114.732 Y114.905 E0.00450 ; infill
;WIDTH:0.303312
G1 X115.030 Y114.972 E0.00662 ; infill
G1 X115.340 Y115.010 E0.00677 ; infill
G1 X115.471 Y115.079 E0.00319 ; infill
;LAYER_CHANGE
;Z:25.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;25.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.340 Y115.010 E-0.03890 ; wipe and retract
G1 X115.030 Y114.972 E-0.08253 ; wipe and retract
G1 X114.732 Y114.905 E-0.08066 ; wipe and retract
;WIPE_END
G1 E-2.19790 F2400.000 ; retract
G1 Z25.275 F10800.000 ; lift Z
G1 Z25.400 ; move to next layer (126)
;AFTER_LAYER_CHANGE
;25.4
G1 Z25.475 ; lift Z
G1 X104.007 Y106.388 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.180 Y106.340 E0.00832 ; perimeter
G1 X104.346 Y106.343 E0.00772 ; perimeter
G1 X104.520 Y106.461 E0.00972 ; perimeter
G1 X104.638 Y106.674 E0.01128 ; perimeter
G1 X104.958 Y106.953 E0.01967 ; perimeter
G1 X105.102 Y107.118 E0.01015 ; perimeter
G1 X105.396 Y107.268 E0.01528 ; perimeter
G1 X105.753 Y107.483 E0.01933 ; perimeter
G1 X105.942 Y107.632 E0.01113 ; perimeter
G1 X106.117 Y107.739 E0.00949 ; perimeter
G1 X106.238 Y107.856 E0.00779 ; perimeter
G1 X106.420 Y107.988 E0.01044 ; perimeter
G1 X106.778 Y108.354 E0.02373 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.924 Y108.607 E0.01220 ; perimeter (bridge)
G1 X106.709 Y108.573 E0.00912 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X106.296 Y108.507 E0.01937 ; perimeter
G1 X105.897 Y108.375 E0.01946 ; perimeter
G1 X105.125 Y108.013 E0.03951 ; perimeter
G1 X104.776 Y107.818 E0.01850 ; perimeter
G1 X104.335 Y107.528 E0.02445 ; perimeter
G1 X103.992 Y107.259 E0.02018 ; perimeter
G1 X103.842 Y107.031 E0.01267 ; perimeter
G1 X103.816 Y106.711 E0.01487 ; perimeter
G1 X103.857 Y106.583 E0.00623 ; perimeter
G1 X103.966 Y106.431 E0.00866 ; perimeter
G1 X104.162 Y106.477 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.180 Y106.340 E-0.06128 ; wipe and retract
G1 X104.346 Y106.343 E-0.04397 ; wipe and retract
G1 X104.520 Y106.461 E-0.05538 ; wipe and retract
G1 X104.638 Y106.674 E-0.06429 ; wipe and retract
G1 X104.958 Y106.953 E-0.11209 ; wipe and retract
G1 X105.102 Y107.118 E-0.05782 ; wipe and retract
G1 X105.396 Y107.268 E-0.08703 ; wipe and retract
G1 X105.753 Y107.483 E-0.11012 ; wipe and retract
G1 X105.942 Y107.632 E-0.06340 ; wipe and retract
G1 X106.117 Y107.739 E-0.05406 ; wipe and retract
G1 X106.238 Y107.856 E-0.04436 ; wipe and retract
G1 X106.420 Y107.988 E-0.05947 ; wipe and retract
G1 X106.778 Y108.354 E-0.13520 ; wipe and retract
;WIPE_END
G1 E-1.45153 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X107.591 Y109.030 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.903 Y109.006 E0.01447 ; perimeter
G1 X108.060 Y109.072 E0.00790 ; perimeter
G1 X108.194 Y109.094 E0.00628 ; perimeter
G1 X108.324 Y109.179 E0.00721 ; perimeter
G1 X108.377 Y109.259 E0.00443 ; perimeter
G1 X108.407 Y109.534 E0.01281 ; perimeter
G1 X108.374 Y109.660 E0.00603 ; perimeter
G1 X108.281 Y109.762 E0.00643 ; perimeter
G1 X108.091 Y109.857 E0.00984 ; perimeter
G1 X107.942 Y109.865 E0.00691 ; perimeter
G1 X107.799 Y109.823 E0.00690 ; perimeter
G1 X107.606 Y109.661 E0.01167 ; perimeter
G1 X107.536 Y109.532 E0.00680 ; perimeter
G1 X107.473 Y109.258 E0.01301 ; perimeter
G1 X107.478 Y109.163 E0.00442 ; perimeter
G1 X107.545 Y109.027 E0.00700 ; perimeter
G1 X107.844 Y109.215 F10800.000 ; move inwards before travel
G1 X106.291 Y108.230 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.112918
G1 F2400.000
G1 X106.014 Y108.081 E0.00183 ; infill
;WIDTH:0.236319
G1 X105.539 Y107.793 E0.00893 ; infill
;WIDTH:0.339972
G1 X104.888 Y107.436 E0.01834 ; infill
;WIDTH:0.326579
G1 X104.582 Y107.185 E0.00934 ; infill
;WIDTH:0.422677
G1 X104.314 Y106.963 E0.01097 ; infill
G1 X104.113 Y106.639 E0.01206 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.314 Y106.963 E-0.10075 ; wipe and retract
G1 X104.582 Y107.185 E-0.09167 ; wipe and retract
;WIPE_END
G1 E-2.20758 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X102.014 Y104.120 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.802 Y104.184 E0.01025 ; perimeter
G1 X101.506 Y104.167 E0.01372 ; perimeter
G1 X101.273 Y104.092 E0.01133 ; perimeter
G1 X101.128 Y103.958 E0.00915 ; perimeter
G1 X101.036 Y103.756 E0.01029 ; perimeter
G1 X101.021 Y103.640 E0.00541 ; perimeter
G1 X101.057 Y103.471 E0.00801 ; perimeter
G1 X101.131 Y103.400 E0.00474 ; perimeter
G1 X101.221 Y103.362 E0.00450 ; perimeter
G1 X101.505 Y103.319 E0.01331 ; perimeter
G1 X101.782 Y103.353 E0.01295 ; perimeter
G1 X101.985 Y103.445 E0.01030 ; perimeter
G1 X102.145 Y103.643 E0.01182 ; perimeter
G1 X102.174 Y103.737 E0.00456 ; perimeter
G1 X102.183 Y103.820 E0.00383 ; perimeter
G1 X102.136 Y104.052 E0.01099 ; perimeter
G1 X102.066 Y104.091 E0.00369 ; perimeter
G1 X101.820 Y104.014 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.802 Y104.184 E-0.07396 ; wipe and retract
G1 X101.506 Y104.167 E-0.07817 ; wipe and retract
G1 X101.273 Y104.092 E-0.06455 ; wipe and retract
G1 X101.128 Y103.958 E-0.05215 ; wipe and retract
G1 X101.036 Y103.756 E-0.05863 ; wipe and retract
G1 X101.021 Y103.640 E-0.03082 ; wipe and retract
G1 X101.057 Y103.471 E-0.04562 ; wipe and retract
G1 X101.131 Y103.400 E-0.02703 ; wipe and retract
G1 X101.221 Y103.362 E-0.02564 ; wipe and retract
G1 X101.505 Y103.319 E-0.07582 ; wipe and retract
G1 X101.782 Y103.353 E-0.07379 ; wipe and retract
G1 X101.985 Y103.445 E-0.05869 ; wipe and retract
G1 X102.145 Y103.643 E-0.06732 ; wipe and retract
G1 X102.174 Y103.737 E-0.02599 ; wipe and retract
G1 X102.183 Y103.820 E-0.02181 ; wipe and retract
G1 X102.136 Y104.052 E-0.06260 ; wipe and retract
G1 X102.066 Y104.091 E-0.02102 ; wipe and retract
;WIPE_END
G1 E-1.53637 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X100.688 Y101.234 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X100.520 Y101.299 E0.00833 ; perimeter
G1 X100.419 Y101.168 E0.00765 ; perimeter
G1 X100.276 Y100.856 E0.01590 ; perimeter
G1 X100.217 Y100.424 E0.02018 ; perimeter
G1 X100.215 Y100.101 E0.01496 ; perimeter
G1 X100.236 Y99.928 E0.00807 ; perimeter
G1 X100.275 Y99.823 E0.00520 ; perimeter
G1 X100.420 Y99.623 E0.01145 ; perimeter
G1 X100.723 Y99.423 E0.01682 ; perimeter
G1 X100.857 Y99.377 E0.00657 ; perimeter
G1 X101.036 Y99.793 E0.02098 ; perimeter
G1 X101.083 Y100.102 E0.01450 ; perimeter
G1 X101.042 Y100.370 E0.01254 ; perimeter
G1 X100.942 Y100.656 E0.01403 ; perimeter
G1 X100.931 Y100.788 E0.00616 ; perimeter
G1 X100.717 Y101.182 E0.02075 ; perimeter
G1 X100.524 Y101.161 F10800.000 ; move inwards before travel
G1 X100.538 Y100.849 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.401311
G1 F2400.000
G1 X100.634 Y100.268 E0.01755 ; infill
G1 X100.677 Y99.742 E0.01571 ; infill
G1 X100.625 Y99.776 F10800.000 ; move to first infill point
;WIDTH:0.272025
G1 F2400.000
G1 X100.595 Y100.597 E0.01565 ; infill
;WIDTH:0.26199
G1 X100.597 Y100.700 E0.00188 ; infill
;WIDTH:0.240081
G1 X100.595 Y100.716 E0.00026 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.597 Y100.700 E-0.00418 ; wipe and retract
;WIPE_END
G1 E-2.39582 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X101.029 Y98.024 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.000 Y98.007 E0.00156 ; perimeter
G1 X100.978 Y97.891 E0.00549 ; perimeter
G1 X100.930 Y97.781 E0.00556 ; perimeter
G1 X100.918 Y97.551 E0.01069 ; perimeter
G1 X100.860 Y97.341 E0.01007 ; perimeter
G1 X100.880 Y97.060 E0.01305 ; perimeter
G1 X101.073 Y96.609 E0.02270 ; perimeter
G1 X101.469 Y96.244 E0.02495 ; perimeter
G1 X101.801 Y96.001 E0.01909 ; perimeter
G1 X101.957 Y95.846 E0.01018 ; perimeter
G1 X102.645 Y95.257 E0.04192 ; perimeter
G1 X102.755 Y95.178 E0.00629 ; perimeter
G1 X103.101 Y95.036 E0.01731 ; perimeter
G1 X103.561 Y94.977 E0.02152 ; perimeter
G1 X103.806 Y95.001 E0.01137 ; perimeter
G1 X104.344 Y94.976 E0.02494 ; perimeter
G1 X104.655 Y94.907 E0.01479 ; perimeter
G1 X105.198 Y94.841 E0.02531 ; perimeter
G1 X106.149 Y94.900 E0.04413 ; perimeter
G1 X106.381 Y94.973 E0.01126 ; perimeter
G1 X106.489 Y95.064 E0.00657 ; perimeter
G1 X106.674 Y95.139 E0.00926 ; perimeter
G1 X106.788 Y95.231 E0.00678 ; perimeter
G1 X107.221 Y95.283 E0.02018 ; perimeter
G1 X107.474 Y95.271 E0.01175 ; perimeter
G1 X107.875 Y95.352 E0.01894 ; perimeter
G1 X107.942 Y95.378 E0.00331 ; perimeter
G1 X108.137 Y95.536 E0.01164 ; perimeter
G1 X108.167 Y95.815 E0.01298 ; perimeter
G1 X107.984 Y95.984 E0.01153 ; perimeter
G1 X107.718 Y96.150 E0.01454 ; perimeter
G1 X107.620 Y96.202 E0.00513 ; perimeter
G1 X107.396 Y96.239 E0.01052 ; perimeter
G1 X107.093 Y96.164 E0.01446 ; perimeter
G1 X106.979 Y96.063 E0.00708 ; perimeter
G1 X106.930 Y95.975 E0.00464 ; perimeter
G1 X106.534 Y95.676 E0.02298 ; perimeter
G1 X105.927 Y95.656 E0.02813 ; perimeter
G1 X105.459 Y95.703 E0.02178 ; perimeter
G1 X104.956 Y95.697 E0.02330 ; perimeter
G1 X104.591 Y95.648 E0.01706 ; perimeter
G1 X104.173 Y95.655 E0.01936 ; perimeter
G1 X103.696 Y95.753 E0.02259 ; perimeter
G1 X102.911 Y96.065 E0.03910 ; perimeter
G1 X102.420 Y96.399 E0.02752 ; perimeter
G1 X102.253 Y96.536 E0.01000 ; perimeter
G1 X102.133 Y96.664 E0.00811 ; perimeter
G1 X101.785 Y97.140 E0.02731 ; perimeter
G1 X101.570 Y97.374 E0.01475 ; perimeter
G1 X101.073 Y97.982 E0.03637 ; perimeter
G1 X101.014 Y97.994 F10800.000 ; move inwards before travel
G1 X101.121 Y97.381 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.338367
G1 F2400.000
G1 X101.278 Y97.118 E0.00752 ; infill
;WIDTH:0.357156
G1 X101.439 Y96.868 E0.00778 ; infill
G1 X101.782 Y96.492 E0.01329 ; infill
;WIDTH:0.261045
G1 X102.036 Y96.262 E0.00622 ; infill
;WIDTH:0.283416
G1 X102.208 Y96.106 E0.00464 ; infill
;WIDTH:0.318428
G1 X102.459 Y95.914 E0.00724 ; infill
;WIDTH:0.353441
G1 X102.711 Y95.723 E0.00817 ; infill
;WIDTH:0.36102
G1 X102.739 Y95.703 E0.00091 ; infill
;WIDTH:0.394138
G1 X102.826 Y95.651 E0.00295 ; infill
;WIDTH:0.427256
G1 X102.912 Y95.599 E0.00323 ; infill
;WIDTH:0.44627
G1 X103.215 Y95.468 E0.01105 ; infill
G1 X103.391 Y95.423 E0.00611 ; infill
;WIDTH:0.3438
G1 X103.567 Y95.377 E0.00456 ; infill
G1 X103.692 Y95.369 E0.00312 ; infill
;WIDTH:0.23117
G1 X104.145 Y95.320 E0.00713 ; infill
;WIDTH:0.239034
G1 X104.397 Y95.312 E0.00411 ; infill
;WIDTH:0.283326
G1 X104.612 Y95.287 E0.00433 ; infill
;WIDTH:0.316806
G1 X104.719 Y95.280 E0.00245 ; infill
;WIDTH:0.36421
G1 X104.940 Y95.277 E0.00589 ; infill
;WIDTH:0.373667
G1 X104.970 Y95.278 E0.00084 ; infill
;WIDTH:0.392463
G1 X105.017 Y95.282 E0.00137 ; infill
;WIDTH:0.417894
G1 X105.440 Y95.280 E0.01319 ; infill
;WIDTH:0.320511
G1 X106.099 Y95.279 E0.01520 ; infill
G1 X106.581 Y95.373 E0.01134 ; infill
G1 X106.708 Y95.500 F10800.000 ; move to first infill point
;WIDTH:0.368783
G1 F2400.000
G1 X107.220 Y95.688 E0.01477 ; infill
;WIDTH:0.402496
G1 X107.448 Y95.790 E0.00749 ; infill
;WIDTH:0.436209
G1 X107.677 Y95.892 E0.00819 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.448 Y95.790 E-0.06608 ; wipe and retract
;WIPE_END
G1 E-2.33392 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X110.108 Y97.302 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.157 Y97.225 E0.00309 ; perimeter
G1 X110.245 Y97.274 E0.00340 ; perimeter
G1 X110.327 Y97.353 E0.00383 ; perimeter
G1 X110.109 Y97.342 E0.00738 ; perimeter
G1 X111.052 Y97.645 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.031 Y97.701 E0.00278 ; perimeter
G1 X110.750 Y97.821 E0.01416 ; perimeter
G1 X110.494 Y97.852 E0.01197 ; perimeter
G1 X110.417 Y97.831 E0.00368 ; perimeter
G1 X110.143 Y97.845 E0.01270 ; perimeter
G1 X110.077 Y97.824 E0.00320 ; perimeter
G1 X109.817 Y97.819 E0.01203 ; perimeter
G1 X109.763 Y97.799 E0.00268 ; perimeter
G1 X109.605 Y97.671 E0.00943 ; perimeter
G1 X109.548 Y97.569 E0.00541 ; perimeter
G1 X109.604 Y97.229 E0.01595 ; perimeter
G1 X109.627 Y97.209 E0.00143 ; perimeter
G1 X109.713 Y96.985 E0.01108 ; perimeter
G1 X109.749 Y96.961 E0.00203 ; perimeter
G1 X109.845 Y96.761 E0.01027 ; perimeter
G1 X110.007 Y96.661 E0.00884 ; perimeter
G1 X110.291 Y96.747 E0.01374 ; perimeter
G1 X110.534 Y96.884 E0.01291 ; perimeter
G1 X110.909 Y97.241 E0.02400 ; perimeter
G1 X111.041 Y97.485 E0.01284 ; perimeter
G1 X111.048 Y97.585 E0.00464 ; perimeter
G1 X110.997 Y97.668 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.031 Y97.701 E-0.03098 ; wipe and retract
G1 X110.750 Y97.821 E-0.08069 ; wipe and retract
G1 X110.494 Y97.852 E-0.06817 ; wipe and retract
G1 X110.417 Y97.831 E-0.02094 ; wipe and retract
G1 X110.143 Y97.845 E-0.07238 ; wipe and retract
G1 X110.077 Y97.824 E-0.01823 ; wipe and retract
G1 X109.817 Y97.819 E-0.06855 ; wipe and retract
G1 X109.763 Y97.799 E-0.01528 ; wipe and retract
G1 X109.605 Y97.671 E-0.05375 ; wipe and retract
G1 X109.548 Y97.569 E-0.03081 ; wipe and retract
G1 X109.604 Y97.229 E-0.09086 ; wipe and retract
G1 X109.627 Y97.209 E-0.00814 ; wipe and retract
G1 X109.713 Y96.985 E-0.06311 ; wipe and retract
G1 X109.749 Y96.961 E-0.01158 ; wipe and retract
G1 X109.845 Y96.761 E-0.05849 ; wipe and retract
G1 X110.007 Y96.661 E-0.05037 ; wipe and retract
G1 X110.291 Y96.747 E-0.07825 ; wipe and retract
G1 X110.534 Y96.884 E-0.07355 ; wipe and retract
G1 X110.909 Y97.241 E-0.13675 ; wipe and retract
G1 X111.041 Y97.485 E-0.07317 ; wipe and retract
G1 X111.048 Y97.585 E-0.02643 ; wipe and retract
;WIPE_END
G1 E-1.26953 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X113.532 Y101.434 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.764 Y101.286 E0.01277 ; perimeter
G1 X114.121 Y101.262 E0.01656 ; perimeter
G1 X114.251 Y101.336 E0.00694 ; perimeter
G1 X114.417 Y101.510 E0.01113 ; perimeter
G1 X114.491 Y101.635 E0.00674 ; perimeter
G1 X114.647 Y102.026 E0.01950 ; perimeter
G1 X114.694 Y102.273 E0.01163 ; perimeter
G1 X114.801 Y102.634 E0.01746 ; perimeter
G1 X114.850 Y102.875 E0.01137 ; perimeter
G1 X114.843 Y102.924 E0.00229 ; perimeter
G1 X114.949 Y103.395 E0.02237 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.027 Y103.744 E0.01495 ; perimeter (bridge)
G1 X115.070 Y104.070 E0.01375 ; perimeter (bridge)
G1 X114.841 Y103.727 E0.01724 ; perimeter (bridge)
G1 X114.704 Y103.569 E0.00875 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.036 Y102.497 E0.05850 ; perimeter
G1 X113.754 Y102.134 E0.02130 ; perimeter
G1 X113.522 Y101.918 E0.01465 ; perimeter
G1 X113.471 Y101.693 E0.01069 ; perimeter
G1 X113.521 Y101.562 E0.00653 ; perimeter
G1 X113.527 Y101.494 E0.00313 ; perimeter
G1 X113.801 Y101.495 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.764 Y101.286 E-0.08327 ; wipe and retract
G1 X114.121 Y101.262 E-0.09437 ; wipe and retract
G1 X114.251 Y101.336 E-0.03952 ; wipe and retract
G1 X114.417 Y101.510 E-0.06342 ; wipe and retract
G1 X114.491 Y101.635 E-0.03841 ; wipe and retract
G1 X114.647 Y102.026 E-0.11106 ; wipe and retract
G1 X114.694 Y102.273 E-0.06628 ; wipe and retract
G1 X114.801 Y102.634 E-0.09948 ; wipe and retract
G1 X114.850 Y102.875 E-0.06480 ; wipe and retract
G1 X114.843 Y102.924 E-0.01304 ; wipe and retract
G1 X114.949 Y103.395 E-0.12744 ; wipe and retract
;WIPE_END
G1 E-1.59892 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X115.765 Y105.591 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X115.636 Y105.719 E0.00842 ; perimeter
G1 X115.524 Y105.763 E0.00556 ; perimeter
G1 X115.348 Y105.765 E0.00815 ; perimeter
G1 X115.270 Y105.735 E0.00388 ; perimeter
G1 X115.060 Y105.536 E0.01343 ; perimeter
G1 X115.009 Y105.322 E0.01020 ; perimeter
G1 X115.056 Y104.946 E0.01755 ; perimeter
G1 X115.194 Y104.737 E0.01158 ; perimeter
G1 X115.184 Y104.537 E0.00924 ; perimeter
G1 X115.219 Y104.598 E0.00324 ; perimeter
G1 X115.488 Y104.806 E0.01576 ; perimeter
G1 X115.559 Y104.814 E0.00328 ; perimeter
G1 X115.708 Y104.974 E0.01013 ; perimeter
G1 X115.824 Y105.204 E0.01193 ; perimeter
G1 X115.830 Y105.379 E0.00814 ; perimeter
G1 X115.783 Y105.534 E0.00747 ; perimeter
G1 X115.584 Y105.581 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.636 Y105.719 E-0.06235 ; wipe and retract
G1 X115.524 Y105.763 E-0.03167 ; wipe and retract
G1 X115.348 Y105.765 E-0.04642 ; wipe and retract
G1 X115.270 Y105.735 E-0.02212 ; wipe and retract
G1 X115.060 Y105.536 E-0.07648 ; wipe and retract
G1 X115.009 Y105.322 E-0.05811 ; wipe and retract
G1 X115.056 Y104.946 E-0.09999 ; wipe and retract
G1 X115.194 Y104.737 E-0.06600 ; wipe and retract
G1 X115.184 Y104.537 E-0.05266 ; wipe and retract
G1 X115.219 Y104.598 E-0.01846 ; wipe and retract
G1 X115.488 Y104.806 E-0.08977 ; wipe and retract
G1 X115.559 Y104.814 E-0.01870 ; wipe and retract
G1 X115.708 Y104.974 E-0.05770 ; wipe and retract
G1 X115.824 Y105.204 E-0.06799 ; wipe and retract
G1 X115.830 Y105.379 E-0.04635 ; wipe and retract
G1 X115.783 Y105.534 E-0.04257 ; wipe and retract
;WIPE_END
G1 E-1.54267 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X113.803 Y101.547 ; move to first infill point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.406519
G1 F2400.000
G1 X114.088 Y101.834 E0.01224 ; infill
G1 X114.552 Y102.643 E0.02820 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.088 Y101.834 E-0.24618 ; wipe and retract
G1 X113.803 Y101.547 E-0.10683 ; wipe and retract
;WIPE_END
G1 E-2.04699 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X115.420 Y111.836 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.272 Y111.759 E0.00772 ; perimeter
G1 X115.187 Y111.570 E0.00964 ; perimeter
G1 X115.169 Y111.241 E0.01523 ; perimeter
G1 X115.283 Y111.010 E0.01197 ; perimeter
G1 X115.413 Y110.929 E0.00706 ; perimeter
G1 X115.613 Y110.916 E0.00932 ; perimeter
G1 X115.702 Y110.952 E0.00444 ; perimeter
G1 X115.792 Y111.046 E0.00602 ; perimeter
G1 X115.883 Y111.318 E0.01328 ; perimeter
G1 X115.881 Y111.447 E0.00598 ; perimeter
G1 X115.840 Y111.615 E0.00802 ; perimeter
G1 X115.770 Y111.745 E0.00685 ; perimeter
G1 X115.674 Y111.819 E0.00563 ; perimeter
G1 X115.479 Y111.849 E0.00914 ; perimeter
G1 X115.372 Y111.676 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.272 Y111.759 E-0.05941 ; wipe and retract
G1 X115.187 Y111.570 E-0.05490 ; wipe and retract
G1 X115.169 Y111.241 E-0.08675 ; wipe and retract
G1 X115.283 Y111.010 E-0.06820 ; wipe and retract
G1 X115.413 Y110.929 E-0.04023 ; wipe and retract
G1 X115.613 Y110.916 E-0.05307 ; wipe and retract
G1 X115.702 Y110.952 E-0.02527 ; wipe and retract
G1 X115.792 Y111.046 E-0.03428 ; wipe and retract
G1 X115.883 Y111.318 E-0.07567 ; wipe and retract
G1 X115.881 Y111.447 E-0.03409 ; wipe and retract
G1 X115.840 Y111.615 E-0.04570 ; wipe and retract
G1 X115.770 Y111.745 E-0.03902 ; wipe and retract
G1 X115.674 Y111.819 E-0.03205 ; wipe and retract
G1 X115.479 Y111.849 E-0.05209 ; wipe and retract
;WIPE_END
G1 E-1.69927 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 X113.355 Y112.817 ; move to first perimeter point
G1 Z25.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.421 Y112.966 E0.00758 ; perimeter
G1 X113.431 Y113.121 E0.00719 ; perimeter
G1 X113.369 Y113.272 E0.00756 ; perimeter
G1 X113.240 Y113.371 E0.00752 ; perimeter
G1 X113.109 Y113.406 E0.00630 ; perimeter
G1 X112.921 Y113.392 E0.00874 ; perimeter
G1 X112.701 Y113.312 E0.01083 ; perimeter
G1 X112.528 Y113.178 E0.01015 ; perimeter
G1 X112.436 Y113.026 E0.00825 ; perimeter
G1 X112.405 Y112.910 E0.00553 ; perimeter
G1 X112.417 Y112.798 E0.00524 ; perimeter
G1 X112.509 Y112.646 E0.00823 ; perimeter
G1 X112.627 Y112.572 E0.00646 ; perimeter
G1 X112.686 Y112.558 E0.00280 ; perimeter
G1 X112.926 Y112.553 E0.01112 ; perimeter
G1 X113.069 Y112.594 E0.00688 ; perimeter
G1 X113.287 Y112.730 E0.01189 ; perimeter
G1 X113.318 Y112.769 E0.00232 ; perimeter
G1 X113.281 Y112.963 F10800.000 ; move inwards before travel
G1 X114.035 Y114.496 ; move to first perimeter point
G1 F1800.000
G1 X114.301 Y114.395 E0.01318 ; perimeter
G1 X114.579 Y114.438 E0.01304 ; perimeter
G1 X114.738 Y114.506 E0.00801 ; perimeter
G1 X115.213 Y114.598 E0.02240 ; perimeter
G1 X115.443 Y114.623 E0.01070 ; perimeter
G1 X115.635 Y114.729 E0.01017 ; perimeter
G1 X115.727 Y114.888 E0.00853 ; perimeter
G1 X115.753 Y115.002 E0.00542 ; perimeter
G1 X115.732 Y115.105 E0.00484 ; perimeter
G1 X115.644 Y115.263 E0.00839 ; perimeter
G1 X115.565 Y115.339 E0.00505 ; perimeter
G1 X115.468 Y115.381 E0.00491 ; perimeter
G1 X115.299 Y115.391 E0.00785 ; perimeter
G1 X114.678 Y115.283 E0.02920 ; perimeter
G1 X114.497 Y115.293 E0.00838 ; perimeter
G1 X114.161 Y115.250 E0.01570 ; perimeter
G1 X113.978 Y115.144 E0.00980 ; perimeter
G1 X113.938 Y115.099 E0.00281 ; perimeter
G1 X113.857 Y114.909 E0.00956 ; perimeter
G1 X113.863 Y114.819 E0.00415 ; perimeter
G1 X113.925 Y114.634 E0.00906 ; perimeter
G1 X113.998 Y114.543 E0.00539 ; perimeter
G1 X114.292 Y114.618 F10800.000 ; move inwards before travel
G1 X115.489 Y114.958 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.328744
G1 F2400.000
G1 X115.349 Y115.003 E0.00349 ; infill
G1 X114.717 Y114.897 E0.01523 ; infill
G1 X114.116 Y114.824 E0.01440 ; infill
;LAYER_CHANGE
;Z:25.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;25.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.717 Y114.897 E-0.15992 ; wipe and retract
G1 X115.349 Y115.003 E-0.16909 ; wipe and retract
G1 X115.489 Y114.958 E-0.03876 ; wipe and retract
;WIPE_END
G1 E-2.03224 F2400.000 ; retract
G1 Z25.475 F10800.000 ; lift Z
G1 Z25.600 ; move to next layer (127)
;AFTER_LAYER_CHANGE
;25.6
G1 Z25.675 ; lift Z
G1 X108.383 Y109.635 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.287 Y109.730 E0.00626 ; perimeter
G1 X108.115 Y109.812 E0.00883 ; perimeter
G1 X107.964 Y109.823 E0.00701 ; perimeter
G1 X107.792 Y109.770 E0.00834 ; perimeter
G1 X107.597 Y109.607 E0.01173 ; perimeter
G1 X107.526 Y109.475 E0.00695 ; perimeter
G1 X107.456 Y109.402 E0.00472 ; perimeter
G1 X107.406 Y109.205 E0.00941 ; perimeter
G1 X107.207 Y109.047 E0.01177 ; perimeter
G1 X107.214 Y108.911 E0.00632 ; perimeter
G1 X106.885 Y108.851 E0.01548 ; perimeter
G1 X106.316 Y108.645 E0.02805 ; perimeter
G1 X105.761 Y108.382 E0.02841 ; perimeter
G1 X105.035 Y107.951 E0.03913 ; perimeter
G1 X104.530 Y107.594 E0.02868 ; perimeter
G1 X104.026 Y107.177 E0.03028 ; perimeter
G1 X103.869 Y106.949 E0.01282 ; perimeter
G1 X103.831 Y106.799 E0.00715 ; perimeter
G1 X103.819 Y106.569 E0.01068 ; perimeter
G1 X103.897 Y106.343 E0.01107 ; perimeter
G1 X104.040 Y106.226 E0.00857 ; perimeter
G1 X104.226 Y106.182 E0.00886 ; perimeter
G1 X104.362 Y106.212 E0.00645 ; perimeter
G1 X104.489 Y106.304 E0.00726 ; perimeter
G1 X104.691 Y106.687 E0.02009 ; perimeter
G1 X104.803 Y106.790 E0.00704 ; perimeter
G1 X105.028 Y107.091 E0.01739 ; perimeter
G1 X105.646 Y107.406 E0.03212 ; perimeter
G1 X106.535 Y107.947 E0.04822 ; perimeter
G1 X106.878 Y108.206 E0.01992 ; perimeter
G1 X107.383 Y108.682 E0.03216 ; perimeter
G1 X107.838 Y108.932 E0.02403 ; perimeter
G1 X107.930 Y108.924 E0.00425 ; perimeter
G1 X108.197 Y109.037 E0.01342 ; perimeter
G1 X108.378 Y109.164 E0.01023 ; perimeter
G1 X108.442 Y109.274 E0.00592 ; perimeter
G1 X108.442 Y109.455 E0.00840 ; perimeter
G1 X108.399 Y109.577 E0.00598 ; perimeter
G1 X108.248 Y109.627 F10800.000 ; move inwards before travel
G1 X106.888 Y108.559 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.222077
G1 F2400.000
G1 X106.326 Y108.246 E0.00959 ; infill
;WIDTH:0.318562
G1 X105.032 Y107.502 E0.03421 ; infill
;WIDTH:0.290139
G1 X104.820 Y107.375 E0.00508 ; infill
;WIDTH:0.258325
G1 X104.626 Y107.184 E0.00487 ; infill
;WIDTH:0.356511
G1 X104.333 Y106.895 E0.01072 ; infill
G1 X104.261 Y106.772 E0.00373 ; infill
G1 X104.143 Y106.449 E0.00897 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.261 Y106.772 E-0.09073 ; wipe and retract
G1 X104.333 Y106.895 E-0.03774 ; wipe and retract
G1 X104.626 Y107.184 E-0.10851 ; wipe and retract
;WIPE_END
G1 E-2.16302 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X101.217 Y103.535 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.333 Y103.420 E0.00758 ; perimeter
G1 X101.695 Y103.322 E0.01734 ; perimeter
G1 X101.928 Y103.339 E0.01083 ; perimeter
G1 X102.150 Y103.474 E0.01205 ; perimeter
G1 X102.321 Y103.690 E0.01277 ; perimeter
G1 X102.388 Y103.933 E0.01165 ; perimeter
G1 X102.368 Y104.124 E0.00892 ; perimeter
G1 X102.287 Y104.182 E0.00464 ; perimeter
G1 X102.034 Y104.233 E0.01191 ; perimeter
G1 X101.647 Y104.198 E0.01800 ; perimeter
G1 X101.546 Y104.141 E0.00540 ; perimeter
G1 X101.396 Y104.094 E0.00725 ; perimeter
G1 X101.251 Y103.954 E0.00935 ; perimeter
G1 X101.201 Y103.856 E0.00511 ; perimeter
G1 X101.171 Y103.660 E0.00918 ; perimeter
G1 X101.196 Y103.591 E0.00341 ; perimeter
G1 X101.381 Y103.538 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.333 Y103.420 E-0.05792 ; wipe and retract
G1 X101.695 Y103.322 E-0.09878 ; wipe and retract
G1 X101.928 Y103.339 E-0.06171 ; wipe and retract
G1 X102.150 Y103.474 E-0.06863 ; wipe and retract
G1 X102.321 Y103.690 E-0.07276 ; wipe and retract
G1 X102.388 Y103.933 E-0.06637 ; wipe and retract
G1 X102.368 Y104.124 E-0.05080 ; wipe and retract
G1 X102.287 Y104.182 E-0.02644 ; wipe and retract
G1 X102.034 Y104.233 E-0.06785 ; wipe and retract
G1 X101.647 Y104.198 E-0.10254 ; wipe and retract
G1 X101.546 Y104.141 E-0.03075 ; wipe and retract
G1 X101.396 Y104.094 E-0.04128 ; wipe and retract
G1 X101.251 Y103.954 E-0.05327 ; wipe and retract
G1 X101.201 Y103.856 E-0.02911 ; wipe and retract
G1 X101.171 Y103.660 E-0.05230 ; wipe and retract
G1 X101.196 Y103.591 E-0.01941 ; wipe and retract
;WIPE_END
G1 E-1.50008 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X106.659 Y95.417 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X107.148 Y95.434 E0.02267 ; perimeter
G1 X107.541 Y95.392 E0.01830 ; perimeter
G1 X107.792 Y95.448 E0.01190 ; perimeter
G1 X107.993 Y95.608 E0.01191 ; perimeter
G1 X108.017 Y95.801 E0.00899 ; perimeter
G1 X107.936 Y95.876 E0.00513 ; perimeter
G1 X107.827 Y96.092 E0.01119 ; perimeter
G1 X107.796 Y96.118 E0.00190 ; perimeter
G1 X107.518 Y96.286 E0.01503 ; perimeter
G1 X107.266 Y96.322 E0.01178 ; perimeter
G1 X106.971 Y96.263 E0.01393 ; perimeter
G1 X106.801 Y96.131 E0.01002 ; perimeter
G1 X106.673 Y95.901 E0.01218 ; perimeter
G1 X106.179 Y95.687 E0.02495 ; perimeter
G1 X105.637 Y95.737 E0.02524 ; perimeter
G1 X105.169 Y95.742 E0.02165 ; perimeter
G1 X104.779 Y95.673 E0.01838 ; perimeter
G1 X104.297 Y95.650 E0.02232 ; perimeter
G1 X103.911 Y95.721 E0.01821 ; perimeter
G1 X103.282 Y95.958 E0.03112 ; perimeter
G1 X102.673 Y96.249 E0.03126 ; perimeter
G1 X102.189 Y96.660 E0.02941 ; perimeter
G1 X102.083 Y96.806 E0.00834 ; perimeter
G1 X101.959 Y97.060 E0.01313 ; perimeter
G1 X101.757 Y97.283 E0.01394 ; perimeter
G1 X101.402 Y97.729 E0.02637 ; perimeter
G1 X101.260 Y98.126 E0.01955 ; perimeter
G1 X101.163 Y98.222 E0.00632 ; perimeter
G1 X101.110 Y98.633 E0.01918 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X101.060 Y98.866 E0.00996 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X101.030 Y99.293 E0.01985 ; perimeter
G1 X101.122 Y99.588 E0.01433 ; perimeter
G1 X101.109 Y99.757 E0.00782 ; perimeter
G1 X101.148 Y100.003 E0.01154 ; perimeter
G1 X101.105 Y100.162 E0.00764 ; perimeter
G1 X101.065 Y100.206 E0.00274 ; perimeter
G1 X100.978 Y100.455 E0.01221 ; perimeter
G1 X100.913 Y100.518 E0.00423 ; perimeter
G1 X100.814 Y100.744 E0.01143 ; perimeter
G1 X100.632 Y100.859 E0.00995 ; perimeter
G1 X100.584 Y100.927 E0.00385 ; perimeter
G1 X100.418 Y100.785 E0.01011 ; perimeter
G1 X100.305 Y100.543 E0.01241 ; perimeter
G1 X100.256 Y100.112 E0.02007 ; perimeter
G1 X100.287 Y99.858 E0.01187 ; perimeter
G1 X100.332 Y99.714 E0.00700 ; perimeter
G1 X100.500 Y99.477 E0.01344 ; perimeter
G1 X100.546 Y99.448 E0.00253 ; perimeter
G1 X100.803 Y99.041 E0.02229 ; perimeter
G1 X100.842 Y98.854 E0.00882 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X100.856 Y98.504 E0.01468 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X100.863 Y98.268 E0.01089 ; perimeter
G1 X100.810 Y97.708 E0.02606 ; perimeter
G1 X100.838 Y97.177 E0.02464 ; perimeter
G1 X101.026 Y96.728 E0.02256 ; perimeter
G1 X101.201 Y96.550 E0.01156 ; perimeter
G1 X101.623 Y96.310 E0.02249 ; perimeter
G1 X101.877 Y96.080 E0.01586 ; perimeter
G1 X102.196 Y95.829 E0.01879 ; perimeter
G1 X102.327 Y95.715 E0.00808 ; perimeter
G1 X102.719 Y95.284 E0.02698 ; perimeter
G1 X102.863 Y95.167 E0.00859 ; perimeter
G1 X103.164 Y95.040 E0.01514 ; perimeter
G1 X103.585 Y94.986 E0.01964 ; perimeter
G1 X103.974 Y95.019 E0.01811 ; perimeter
G1 X104.433 Y94.998 E0.02127 ; perimeter
G1 X104.621 Y94.984 E0.00873 ; perimeter
G1 X104.888 Y94.914 E0.01278 ; perimeter
G1 X105.152 Y94.880 E0.01235 ; perimeter
G1 X105.582 Y94.870 E0.01991 ; perimeter
G1 X105.953 Y94.921 E0.01735 ; perimeter
G1 X106.203 Y95.027 E0.01262 ; perimeter
G1 X106.614 Y95.378 E0.02499 ; perimeter
G1 X106.776 Y95.800 F10800.000 ; move inwards before travel
G1 X106.174 Y95.320 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.393527
G1 F2400.000
G1 X105.074 Y95.306 E0.03208 ; infill
;WIDTH:0.386194
G1 X104.964 Y95.303 E0.00315 ; infill
G1 X104.828 Y95.309 F10800.000 ; move to first infill point
;WIDTH:0.294172
G1 F2400.000
G1 X104.687 Y95.323 E0.00295 ; infill
;WIDTH:0.250253
G1 X104.454 Y95.327 E0.00402 ; infill
;WIDTH:0.220094
G1 X104.285 Y95.327 E0.00249 ; infill
;WIDTH:0.204867
G1 X103.810 Y95.371 E0.00642 ; infill
G1 X104.234 Y95.248 F10800.000 ; move to first infill point
;WIDTH:0.394699
G1 F2400.000
G1 X103.282 Y95.476 E0.02863 ; infill
G1 X103.096 Y95.552 E0.00588 ; infill
G1 X102.928 Y95.669 E0.00598 ; infill
;WIDTH:0.38681
G1 X102.835 Y95.738 E0.00329 ; infill
;WIDTH:0.34254
G1 X102.743 Y95.807 E0.00287 ; infill
;WIDTH:0.298271
G1 X102.650 Y95.876 E0.00245 ; infill
;WIDTH:0.254001
G1 X102.558 Y95.944 E0.00202 ; infill
;WIDTH:0.209731
G1 X102.508 Y95.977 E0.00083 ; infill
;WIDTH:0.193274
G1 X101.961 Y96.435 E0.00893 ; infill
G1 X101.774 Y96.631 E0.00338 ; infill
G1 X102.160 Y96.368 F10800.000 ; move to first infill point
;WIDTH:0.469596
G1 F2400.000
G1 X101.477 Y96.916 E0.03108 ; infill
G1 X101.416 Y96.978 E0.00308 ; infill
G1 X101.232 Y97.289 E0.01283 ; infill
;WIDTH:0.424543
G1 X101.058 Y97.584 E0.01086 ; infill
G1 X100.844 Y99.506 F10800.000 ; move to first infill point
;WIDTH:0.209238
G1 F2400.000
G1 X100.746 Y99.757 E0.00372 ; infill
;WIDTH:0.305713
G1 X100.538 Y100.458 E0.01597 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.746 Y99.757 E-0.19289 ; wipe and retract
;WIPE_END
G1 E-2.20711 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X106.871 Y95.760 ; move to first infill point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.415847
G1 F2400.000
G1 X107.151 Y95.861 E0.00923 ; infill
;WIDTH:0.423814
G1 X107.177 Y95.864 E0.00084 ; infill
;WIDTH:0.454415
G1 X107.279 Y95.869 E0.00348 ; infill
G1 X107.696 Y95.817 E0.01439 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.279 Y95.869 E-0.11096 ; wipe and retract
G1 X107.177 Y95.864 E-0.02680 ; wipe and retract
;WIPE_END
G1 E-2.26224 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X109.450 Y97.309 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.733 Y97.066 E0.01728 ; perimeter
G1 X109.873 Y96.970 E0.00784 ; perimeter
G1 X110.075 Y96.875 E0.01035 ; perimeter
G1 X110.264 Y96.895 E0.00876 ; perimeter
G1 X110.531 Y97.036 E0.01401 ; perimeter
G1 X110.744 Y97.206 E0.01262 ; perimeter
G1 X110.824 Y97.392 E0.00938 ; perimeter
G1 X110.841 Y97.502 E0.00513 ; perimeter
G1 X110.800 Y97.633 E0.00637 ; perimeter
G1 X110.599 Y97.751 E0.01079 ; perimeter
G1 X110.233 Y97.849 E0.01753 ; perimeter
G1 X109.606 Y97.868 E0.02908 ; perimeter
G1 X109.529 Y97.847 E0.00367 ; perimeter
G1 X109.376 Y97.697 E0.00992 ; perimeter
G1 X109.439 Y97.368 E0.01554 ; perimeter
G1 X109.823 Y97.309 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.733 Y97.066 E-0.11127 ; wipe and retract
G1 X109.873 Y96.970 E-0.04468 ; wipe and retract
G1 X110.075 Y96.875 E-0.05899 ; wipe and retract
G1 X110.264 Y96.895 E-0.04993 ; wipe and retract
G1 X110.531 Y97.036 E-0.07984 ; wipe and retract
G1 X110.744 Y97.206 E-0.07189 ; wipe and retract
G1 X110.824 Y97.392 E-0.05347 ; wipe and retract
G1 X110.841 Y97.502 E-0.02920 ; wipe and retract
G1 X110.800 Y97.633 E-0.03627 ; wipe and retract
G1 X110.599 Y97.751 E-0.06147 ; wipe and retract
G1 X110.233 Y97.849 E-0.09986 ; wipe and retract
G1 X109.606 Y97.868 E-0.16568 ; wipe and retract
G1 X109.529 Y97.847 E-0.02090 ; wipe and retract
G1 X109.376 Y97.697 E-0.05652 ; wipe and retract
G1 X109.439 Y97.368 E-0.08852 ; wipe and retract
;WIPE_END
G1 E-1.37153 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X113.334 Y101.837 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.248 Y101.662 E0.00902 ; perimeter
G1 X113.274 Y101.572 E0.00436 ; perimeter
G1 X113.273 Y101.475 E0.00448 ; perimeter
G1 X113.654 Y101.399 E0.01802 ; perimeter
G1 X113.728 Y101.354 E0.00398 ; perimeter
G1 X113.927 Y101.346 E0.00922 ; perimeter
G1 X114.142 Y101.383 E0.01010 ; perimeter
G1 X114.318 Y101.492 E0.00962 ; perimeter
G1 X114.433 Y101.609 E0.00761 ; perimeter
G1 X114.611 Y101.909 E0.01615 ; perimeter
G1 X114.944 Y102.804 E0.04424 ; perimeter
G1 X115.245 Y103.842 E0.05004 ; perimeter
G1 X115.353 Y104.318 E0.02261 ; perimeter
G1 X115.525 Y104.698 E0.01932 ; perimeter
G1 X115.746 Y104.952 E0.01562 ; perimeter
G1 X115.801 Y105.060 E0.00559 ; perimeter
G1 X115.826 Y105.293 E0.01085 ; perimeter
G1 X115.763 Y105.514 E0.01063 ; perimeter
G1 X115.648 Y105.635 E0.00776 ; perimeter
G1 X115.533 Y105.688 E0.00583 ; perimeter
G1 X115.312 Y105.697 E0.01025 ; perimeter
G1 X115.272 Y105.680 E0.00204 ; perimeter
G1 X115.022 Y105.453 E0.01563 ; perimeter
G1 X114.963 Y105.285 E0.00826 ; perimeter
G1 X114.951 Y105.188 E0.00451 ; perimeter
G1 X114.963 Y105.001 E0.00871 ; perimeter
G1 X115.022 Y104.680 E0.01511 ; perimeter
G1 X114.985 Y104.551 E0.00622 ; perimeter
G1 X114.964 Y104.292 E0.01203 ; perimeter
G1 X114.793 Y104.065 E0.01317 ; perimeter
G1 X114.719 Y103.902 E0.00827 ; perimeter
G1 X114.445 Y103.437 E0.02501 ; perimeter
G1 X114.208 Y102.942 E0.02543 ; perimeter
G1 X113.849 Y102.362 E0.03157 ; perimeter
G1 X113.416 Y101.957 E0.02748 ; perimeter
G1 X113.368 Y101.886 E0.00395 ; perimeter
G1 X113.425 Y101.664 F10800.000 ; move inwards before travel
G1 X113.550 Y101.724 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.363098
G1 F2400.000
G1 X113.693 Y101.751 E0.00389 ; infill
;WIDTH:0.397938
G1 X113.837 Y101.778 E0.00432 ; infill
;WIDTH:0.421185
G1 X113.856 Y101.780 E0.00060 ; infill
;WIDTH:0.436474
G1 X113.875 Y101.787 E0.00065 ; infill
;WIDTH:0.448009
G1 X113.989 Y101.845 E0.00431 ; infill
G1 X114.052 Y101.901 E0.00286 ; infill
G1 X114.209 Y102.101 E0.00858 ; infill
G1 X114.316 Y102.320 E0.00821 ; infill
;WIDTH:0.351497
G1 X114.531 Y102.757 E0.01249 ; infill
;WIDTH:0.255261
G1 X114.738 Y103.282 E0.00995 ; infill
;WIDTH:0.139131
G1 X114.948 Y103.770 E0.00426 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.738 Y103.282 E-0.14045 ; wipe and retract
;WIPE_END
G1 E-2.25955 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X115.385 Y111.920 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.256 Y111.832 E0.00721 ; perimeter
G1 X115.179 Y111.611 E0.01086 ; perimeter
G1 X115.176 Y111.325 E0.01324 ; perimeter
G1 X115.282 Y111.102 E0.01145 ; perimeter
G1 X115.450 Y111.007 E0.00893 ; perimeter
G1 X115.601 Y111.007 E0.00699 ; perimeter
G1 X115.702 Y111.048 E0.00502 ; perimeter
G1 X115.792 Y111.143 E0.00608 ; perimeter
G1 X115.879 Y111.401 E0.01260 ; perimeter
G1 X115.882 Y111.517 E0.00538 ; perimeter
G1 X115.836 Y111.729 E0.01006 ; perimeter
G1 X115.795 Y111.809 E0.00418 ; perimeter
G1 X115.663 Y111.921 E0.00801 ; perimeter
G1 X115.515 Y111.948 E0.00696 ; perimeter
G1 X115.443 Y111.933 E0.00337 ; perimeter
G1 X115.366 Y111.766 F10800.000 ; move inwards before travel
G1 X115.479 Y111.694 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.20076
G1 F2400.000
G1 X115.521 Y111.621 E0.00110 ; infill
;WIDTH:0.219971
G1 X115.526 Y111.605 E0.00025 ; infill
;WIDTH:0.249064
G1 X115.523 Y111.551 E0.00092 ; infill
;WIDTH:0.263798
G1 X115.529 Y111.462 E0.00164 ; infill
G1 X115.495 Y111.259 E0.00378 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.529 Y111.462 E-0.05436 ; wipe and retract
G1 X115.523 Y111.551 E-0.02357 ; wipe and retract
;WIPE_END
G1 E-2.32207 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 X113.498 Y112.920 ; move to first perimeter point
G1 Z25.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.525 Y112.982 E0.00314 ; perimeter
G1 X113.547 Y113.159 E0.00827 ; perimeter
G1 X113.474 Y113.359 E0.00983 ; perimeter
G1 X113.361 Y113.448 E0.00666 ; perimeter
G1 X113.236 Y113.465 E0.00584 ; perimeter
G1 X113.007 Y113.439 E0.01066 ; perimeter
G1 X112.795 Y113.353 E0.01062 ; perimeter
G1 X112.641 Y113.228 E0.00920 ; perimeter
G1 X112.524 Y112.996 E0.01204 ; perimeter
G1 X112.520 Y112.891 E0.00485 ; perimeter
G1 X112.539 Y112.821 E0.00334 ; perimeter
G1 X112.622 Y112.694 E0.00703 ; perimeter
G1 X112.744 Y112.624 E0.00652 ; perimeter
G1 X112.858 Y112.597 E0.00545 ; perimeter
G1 X113.028 Y112.601 E0.00786 ; perimeter
G1 X113.179 Y112.646 E0.00730 ; perimeter
G1 X113.399 Y112.781 E0.01197 ; perimeter
G1 X113.463 Y112.871 E0.00511 ; perimeter
G1 X113.466 Y112.980 F10800.000 ; move inwards before travel
G1 X114.107 Y114.459 ; move to first perimeter point
G1 F1800.000
G1 X114.377 Y114.366 E0.01323 ; perimeter
G1 X114.658 Y114.409 E0.01316 ; perimeter
G1 X114.882 Y114.504 E0.01127 ; perimeter
G1 X115.436 Y114.612 E0.02615 ; perimeter
G1 X115.567 Y114.669 E0.00660 ; perimeter
G1 X115.648 Y114.730 E0.00471 ; perimeter
G1 X115.731 Y114.877 E0.00782 ; perimeter
G1 X115.758 Y114.995 E0.00563 ; perimeter
G1 X115.735 Y115.105 E0.00519 ; perimeter
G1 X115.647 Y115.253 E0.00795 ; perimeter
G1 X115.562 Y115.335 E0.00548 ; perimeter
G1 X115.467 Y115.376 E0.00478 ; perimeter
G1 X115.295 Y115.383 E0.00801 ; perimeter
G1 X114.261 Y115.243 E0.04830 ; perimeter
G1 X114.153 Y115.197 E0.00546 ; perimeter
G1 X114.037 Y115.112 E0.00667 ; perimeter
G1 X113.921 Y114.893 E0.01146 ; perimeter
G1 X113.929 Y114.781 E0.00518 ; perimeter
G1 X114.004 Y114.563 E0.01068 ; perimeter
G1 X114.065 Y114.502 E0.00403 ; perimeter
G1 X114.362 Y114.589 F10800.000 ; move inwards before travel
G1 X114.180 Y114.882 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.411585
G1 F2400.000
G1 X114.364 Y114.824 E0.00591 ; infill
;WIDTH:0.423955
G1 X114.376 Y114.823 E0.00040 ; infill
;WIDTH:0.441657
G1 X114.640 Y114.864 E0.00885 ; infill
;WIDTH:0.331035
G1 X115.352 Y114.995 E0.01734 ; infill
G1 X115.495 Y114.949 E0.00360 ; infill
;LAYER_CHANGE
;Z:25.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;25.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.352 Y114.995 E-0.03961 ; wipe and retract
G1 X114.640 Y114.864 E-0.19103 ; wipe and retract
;WIPE_END
G1 E-2.16936 F2400.000 ; retract
G1 Z25.675 F10800.000 ; lift Z
G1 Z25.800 ; move to next layer (128)
;AFTER_LAYER_CHANGE
;25.8
G1 Z25.875 ; lift Z
G1 X108.519 Y109.443 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.426 Y109.578 E0.00763 ; perimeter
G1 X108.286 Y109.711 E0.00894 ; perimeter
G1 X108.146 Y109.765 E0.00693 ; perimeter
G1 X107.986 Y109.781 E0.00747 ; perimeter
G1 X107.784 Y109.717 E0.00979 ; perimeter
G1 X107.558 Y109.527 E0.01367 ; perimeter
G1 X107.379 Y109.340 E0.01198 ; perimeter
G1 X107.369 Y109.299 E0.00197 ; perimeter
G1 X107.036 Y109.008 E0.02049 ; perimeter
G1 X106.209 Y108.653 E0.04167 ; perimeter
G1 X105.769 Y108.387 E0.02383 ; perimeter
G1 X104.974 Y107.810 E0.04549 ; perimeter
G1 X104.619 Y107.445 E0.02359 ; perimeter
G1 X104.242 Y107.209 E0.02060 ; perimeter
G1 X104.017 Y107.039 E0.01309 ; perimeter
G1 X103.882 Y106.843 E0.01103 ; perimeter
G1 X103.815 Y106.593 E0.01198 ; perimeter
G1 X103.808 Y106.432 E0.00747 ; perimeter
G1 X103.921 Y106.127 E0.01504 ; perimeter
G1 X104.035 Y106.039 E0.00667 ; perimeter
G1 X104.215 Y106.020 E0.00837 ; perimeter
G1 X104.350 Y106.061 E0.00654 ; perimeter
G1 X104.442 Y106.134 E0.00549 ; perimeter
G1 X104.556 Y106.307 E0.00958 ; perimeter
G1 X104.660 Y106.521 E0.01101 ; perimeter
G1 X104.679 Y106.662 E0.00658 ; perimeter
G1 X104.832 Y106.890 E0.01273 ; perimeter
G1 X104.847 Y107.053 E0.00756 ; perimeter
G1 X105.067 Y107.203 E0.01233 ; perimeter
G1 X105.342 Y107.305 E0.01361 ; perimeter
G1 X105.566 Y107.432 E0.01192 ; perimeter
G1 X105.960 Y107.601 E0.01983 ; perimeter
G1 X106.467 Y107.868 E0.02655 ; perimeter
G1 X106.919 Y108.141 E0.02443 ; perimeter
G1 X107.551 Y108.610 E0.03650 ; perimeter
G1 X107.927 Y108.840 E0.02039 ; perimeter
G1 X108.341 Y109.041 E0.02133 ; perimeter
G1 X108.376 Y109.105 E0.00336 ; perimeter
G1 X108.442 Y109.161 E0.00401 ; perimeter
G1 X108.517 Y109.306 E0.00756 ; perimeter
G1 X108.518 Y109.383 E0.00355 ; perimeter
G1 X108.358 Y109.477 F10800.000 ; move inwards before travel
G1 X108.168 Y109.490 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.326691
G1 F2400.000
G1 X107.719 Y109.152 E0.01327 ; infill
;WIDTH:0.311867
G1 X107.707 Y109.136 E0.00046 ; infill
;WIDTH:0.296406
G1 X107.656 Y109.085 E0.00152 ; infill
;WIDTH:0.261787
G1 X107.515 Y108.982 E0.00317 ; infill
;WIDTH:0.231861
G1 X107.375 Y108.878 E0.00274 ; infill
;WIDTH:0.201934
G1 X107.213 Y108.748 E0.00275 ; infill
;WIDTH:0.186679
G1 X106.870 Y108.548 E0.00474 ; infill
;WIDTH:0.31767
G1 X106.394 Y108.294 E0.01233 ; infill
G1 X105.611 Y107.836 E0.02072 ; infill
;WIDTH:0.26725
G1 X105.424 Y107.730 E0.00401 ; infill
;WIDTH:0.219871
G1 X105.209 Y107.592 E0.00376 ; infill
;WIDTH:0.190733
G1 X104.984 Y107.471 E0.00313 ; infill
G1 X104.322 Y106.967 F10800.000 ; move to first infill point
;WIDTH:0.390708
G1 F2400.000
G1 X104.258 Y106.642 E0.00959 ; infill
G1 X104.216 Y106.531 E0.00342 ; infill
;WIDTH:0.367753
G1 X104.209 Y106.505 E0.00075 ; infill
;WIDTH:0.356481
G1 X104.135 Y106.274 E0.00633 ; infill
G1 X104.132 Y106.276 F10800.000 ; move to first infill point
;WIDTH:0.158381
G1 F2400.000
G1 X104.158 Y106.310 E0.00041 ; infill
;WIDTH:0.19937
G1 X104.184 Y106.344 E0.00056 ; infill
;WIDTH:0.228399
G1 X104.366 Y107.001 E0.01051 ; infill
G1 X104.610 Y107.106 F10800.000 ; move to first infill point
;WIDTH:0.299359
G1 F2400.000
G1 X104.302 Y106.768 E0.00975 ; infill
G1 X104.082 Y106.391 E0.00931 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.302 Y106.768 E-0.11517 ; wipe and retract
G1 X104.610 Y107.106 E-0.12070 ; wipe and retract
;WIPE_END
G1 E-2.16413 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X107.256 Y108.880 ; move to first infill point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.414133
G1 F2400.000
G1 X108.031 Y109.352 E0.02800 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.256 Y108.880 E-0.23937 ; wipe and retract
;WIPE_END
G1 E-2.16063 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X101.309 Y103.684 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.355 Y103.562 E0.00602 ; perimeter
G1 X101.536 Y103.397 E0.01136 ; perimeter
G1 X101.866 Y103.297 E0.01597 ; perimeter
G1 X102.057 Y103.310 E0.00888 ; perimeter
G1 X102.111 Y103.343 E0.00292 ; perimeter
G1 X102.306 Y103.392 E0.00930 ; perimeter
G1 X102.501 Y103.729 E0.01807 ; perimeter
G1 X102.657 Y104.104 E0.01880 ; perimeter
G1 X102.787 Y104.328 E0.01202 ; perimeter
G1 X102.805 Y104.464 E0.00632 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.811 Y104.484 E0.00088 ; perimeter (bridge)
G1 X102.774 Y104.479 E0.00154 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.671 Y104.466 E0.00481 ; perimeter
G1 X102.357 Y104.366 E0.01530 ; perimeter
G1 X102.307 Y104.376 E0.00235 ; perimeter
G1 X102.142 Y104.336 E0.00785 ; perimeter
G1 X101.942 Y104.238 E0.01031 ; perimeter
G1 X101.752 Y104.227 E0.00884 ; perimeter
G1 X101.540 Y104.117 E0.01104 ; perimeter
G1 X101.387 Y103.965 E0.01000 ; perimeter
G1 X101.310 Y103.744 E0.01086 ; perimeter
G1 X101.426 Y103.628 F10800.000 ; move inwards before travel
G1 X101.925 Y103.772 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.490477
G1 F2400.000
G1 X101.906 Y103.771 E0.00073 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.925 Y103.772 E-0.00517 ; wipe and retract
;WIPE_END
G1 E-2.39483 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X101.403 Y97.104 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.406 Y97.100 E0.00015 ; perimeter
G1 X101.023 Y96.808 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.132 Y96.688 E0.00749 ; perimeter
G1 X102.037 Y96.276 E0.04605 ; perimeter
G1 X102.453 Y95.782 E0.02993 ; perimeter
G1 X102.570 Y95.615 E0.00946 ; perimeter
G1 X102.981 Y95.158 E0.02849 ; perimeter
G1 X103.251 Y95.041 E0.01358 ; perimeter
G1 X103.609 Y94.994 E0.01676 ; perimeter
G1 X104.029 Y95.021 E0.01947 ; perimeter
G1 X104.744 Y94.997 E0.03315 ; perimeter
G1 X105.120 Y94.922 E0.01775 ; perimeter
G1 X105.565 Y94.903 E0.02065 ; perimeter
G1 X105.781 Y94.948 E0.01024 ; perimeter
G1 X105.999 Y95.064 E0.01143 ; perimeter
G1 X106.208 Y95.314 E0.01511 ; perimeter
G1 X106.551 Y95.574 E0.01993 ; perimeter
G1 X106.951 Y95.580 E0.01853 ; perimeter
G1 X107.220 Y95.526 E0.01268 ; perimeter
G1 X107.517 Y95.498 E0.01382 ; perimeter
G1 X107.727 Y95.560 E0.01015 ; perimeter
G1 X107.824 Y95.632 E0.00562 ; perimeter
G1 X107.848 Y95.657 E0.00159 ; perimeter
G1 X107.873 Y95.779 E0.00576 ; perimeter
G1 X107.863 Y95.878 E0.00462 ; perimeter
G1 X107.724 Y96.156 E0.01440 ; perimeter
G1 X107.501 Y96.341 E0.01341 ; perimeter
G1 X107.411 Y96.354 E0.00420 ; perimeter
G1 X107.225 Y96.440 E0.00951 ; perimeter
G1 X106.859 Y96.393 E0.01706 ; perimeter
G1 X106.605 Y96.185 E0.01524 ; perimeter
G1 X106.113 Y95.894 E0.02647 ; perimeter
G1 X105.964 Y95.909 E0.00695 ; perimeter
G1 X105.439 Y95.827 E0.02463 ; perimeter
G1 X104.688 Y95.754 E0.03496 ; perimeter
G1 X104.129 Y95.748 E0.02588 ; perimeter
G1 X103.546 Y95.951 E0.02857 ; perimeter
G1 X103.019 Y96.199 E0.02700 ; perimeter
G1 X102.499 Y96.602 E0.03045 ; perimeter
G1 X102.252 Y96.857 E0.01649 ; perimeter
G1 X102.206 Y96.951 E0.00481 ; perimeter
G1 X102.075 Y97.110 E0.00957 ; perimeter
G1 X101.810 Y97.392 E0.01792 ; perimeter
G1 X101.637 Y97.537 E0.01044 ; perimeter
G1 X101.458 Y97.929 E0.01995 ; perimeter
G1 X101.308 Y98.409 E0.02330 ; perimeter
G1 X101.284 Y98.903 E0.02291 ; perimeter
G1 X101.221 Y99.140 E0.01135 ; perimeter
G1 X101.207 Y99.350 E0.00975 ; perimeter
G1 X101.236 Y99.442 E0.00448 ; perimeter
G1 X101.204 Y99.852 E0.01902 ; perimeter
G1 X101.215 Y99.919 E0.00317 ; perimeter
G1 X101.174 Y100.073 E0.00739 ; perimeter
G1 X101.013 Y100.251 E0.01112 ; perimeter
G1 X100.995 Y100.302 E0.00251 ; perimeter
G1 X100.774 Y100.539 E0.01499 ; perimeter
G1 X100.672 Y100.599 E0.00548 ; perimeter
G1 X100.588 Y100.597 E0.00389 ; perimeter
G1 X100.447 Y100.494 E0.00806 ; perimeter
G1 X100.333 Y100.232 E0.01325 ; perimeter
G1 X100.308 Y100.008 E0.01046 ; perimeter
G1 X100.335 Y99.789 E0.01022 ; perimeter
G1 X100.387 Y99.593 E0.00937 ; perimeter
G1 X100.495 Y99.442 E0.00860 ; perimeter
G1 X100.563 Y99.163 E0.01330 ; perimeter
G1 X100.651 Y98.988 E0.00909 ; perimeter
G1 X100.704 Y98.566 E0.01967 ; perimeter
G1 X100.718 Y98.114 E0.02096 ; perimeter
G1 X100.794 Y97.302 E0.03778 ; perimeter
G1 X100.986 Y96.855 E0.02253 ; perimeter
G1 X101.184 Y96.815 F10800.000 ; move inwards before travel
G1 X101.251 Y97.291 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.400536
G1 F2400.000
G1 X101.206 Y97.457 E0.00511 ; infill
;WIDTH:0.36564
G1 X101.162 Y97.623 E0.00461 ; infill
;WIDTH:0.330743
G1 X101.117 Y97.789 E0.00411 ; infill
;WIDTH:0.295848
G1 X101.081 Y97.970 E0.00387 ; infill
;WIDTH:0.256238
G1 X101.048 Y98.134 E0.00298 ; infill
;WIDTH:0.221031
G1 X101.030 Y98.241 E0.00161 ; infill
;WIDTH:0.191575
G1 X101.012 Y98.348 E0.00134 ; infill
;WIDTH:0.162121
G1 X100.978 Y98.856 E0.00504 ; infill
G1 X100.937 Y99.065 E0.00211 ; infill
;WIDTH:0.149199
G1 X100.878 Y99.279 E0.00196 ; infill
;WIDTH:0.243024
G1 X100.818 Y100.107 E0.01382 ; infill
G1 X100.662 Y100.291 F10800.000 ; move to first infill point
;WIDTH:0.312407
G1 F2400.000
G1 X100.863 Y99.484 E0.01862 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.662 Y100.291 E-0.21930 ; wipe and retract
;WIPE_END
G1 E-2.18070 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X101.632 Y96.956 ; move to first infill point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.215584
G1 F2400.000
G1 X102.096 Y96.582 E0.00855 ; infill
;WIDTH:0.119143
G1 X102.214 Y96.497 E0.00093 ; infill
;WIDTH:0.126981
G1 X102.312 Y96.388 E0.00102 ; infill
;WIDTH:0.166776
G1 X102.449 Y96.257 E0.00195 ; infill
;WIDTH:0.20657
G1 X102.586 Y96.126 E0.00258 ; infill
;WIDTH:0.248767
G1 X102.729 Y95.988 E0.00340 ; infill
;WIDTH:0.28732
G1 X102.817 Y95.895 E0.00261 ; infill
;WIDTH:0.298816
G1 X102.838 Y95.876 E0.00060 ; infill
;WIDTH:0.318896
G1 X102.868 Y95.851 E0.00089 ; infill
G1 X102.742 Y95.791 F10800.000 ; move to first infill point
;WIDTH:0.488047
G1 F2400.000
G1 X103.378 Y95.505 E0.02581 ; infill
G1 X103.624 Y95.446 E0.00937 ; infill
G1 X104.016 Y95.393 F10800.000 ; move to first infill point
;WIDTH:0.294199
G1 F2400.000
G1 X104.091 Y95.383 E0.00157 ; infill
;WIDTH:0.317366
G1 X104.714 Y95.376 E0.01422 ; infill
;WIDTH:0.330584
G1 X104.800 Y95.378 E0.00206 ; infill
;WIDTH:0.36699
G1 X104.924 Y95.372 E0.00335 ; infill
;WIDTH:0.403398
G1 X105.048 Y95.366 E0.00372 ; infill
;WIDTH:0.439806
G1 X105.172 Y95.360 E0.00410 ; infill
;WIDTH:0.486098
G1 X105.623 Y95.388 E0.01664 ; infill
G1 X106.128 Y95.556 E0.01962 ; infill
G1 X107.410 Y96.110 F10800.000 ; move to first infill point
;WIDTH:0.232879
G1 F2400.000
G1 X106.529 Y95.825 E0.01462 ; infill
G1 X106.525 Y95.839 F10800.000 ; move to first infill point
;WIDTH:0.378578
G1 F2400.000
G1 X107.006 Y95.986 E0.01404 ; infill
;WIDTH:0.405209
G1 X107.155 Y95.987 E0.00448 ; infill
G1 X107.281 Y95.947 E0.00399 ; infill
G1 X107.578 Y95.910 E0.00901 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.281 Y95.947 E-0.07889 ; wipe and retract
G1 X107.155 Y95.987 E-0.03499 ; wipe and retract
G1 X107.006 Y95.986 E-0.03921 ; wipe and retract
;WIPE_END
G1 E-2.24691 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X110.619 Y97.521 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.591 Y97.595 E0.00368 ; perimeter
G1 X110.464 Y97.669 E0.00678 ; perimeter
G1 X110.348 Y97.781 E0.00751 ; perimeter
G1 X110.060 Y97.874 E0.01397 ; perimeter
G1 X109.591 Y97.896 E0.02176 ; perimeter
G1 X109.451 Y97.938 E0.00680 ; perimeter
G1 X109.338 Y97.924 E0.00526 ; perimeter
G1 X109.161 Y97.769 E0.01088 ; perimeter
G1 X109.164 Y97.578 E0.00885 ; perimeter
G1 X109.218 Y97.444 E0.00669 ; perimeter
G1 X109.438 Y97.254 E0.01346 ; perimeter
G1 X110.070 Y97.009 E0.03140 ; perimeter
G1 X110.183 Y97.027 E0.00529 ; perimeter
G1 X110.506 Y97.188 E0.01673 ; perimeter
G1 X110.592 Y97.341 E0.00812 ; perimeter
G1 X110.610 Y97.461 E0.00566 ; perimeter
G1 X110.545 Y97.551 F10800.000 ; move inwards before travel
G1 X110.363 Y97.440 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.166586
G1 F2400.000
G1 X110.284 Y97.418 E0.00084 ; infill
G1 X109.528 Y97.495 E0.00781 ; infill
G1 X110.167 Y97.287 F10800.000 ; move to first infill point
;WIDTH:0.196491
G1 F2400.000
G1 X109.404 Y97.647 E0.01078 ; infill
G1 X109.418 Y97.593 F10800.000 ; move to first infill point
;WIDTH:0.283984
G1 F2400.000
G1 X109.609 Y97.554 E0.00391 ; infill
;WIDTH:0.323266
G1 X109.800 Y97.515 E0.00454 ; infill
;WIDTH:0.350696
G1 X110.097 Y97.437 E0.00784 ; infill
G1 X110.358 Y97.452 E0.00670 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.097 Y97.437 E-0.06908 ; wipe and retract
G1 X109.800 Y97.515 E-0.08088 ; wipe and retract
;WIPE_END
G1 E-2.25005 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X113.840 Y102.318 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.556 Y102.175 E0.01470 ; perimeter
G1 X113.271 Y101.950 E0.01686 ; perimeter
G1 X113.028 Y101.686 E0.01661 ; perimeter
G1 X112.960 Y101.544 E0.00729 ; perimeter
G1 X112.958 Y101.455 E0.00413 ; perimeter
G1 X113.025 Y101.356 E0.00554 ; perimeter
G1 X113.109 Y101.325 E0.00412 ; perimeter
G1 X113.317 Y101.331 E0.00965 ; perimeter
G1 X113.420 Y101.310 E0.00490 ; perimeter
G1 X113.512 Y101.317 E0.00428 ; perimeter
G1 X113.712 Y101.396 E0.00994 ; perimeter
G1 X113.917 Y101.384 E0.00952 ; perimeter
G1 X114.022 Y101.414 E0.00505 ; perimeter
G1 X114.213 Y101.518 E0.01007 ; perimeter
G1 X114.448 Y101.715 E0.01420 ; perimeter
G1 X114.695 Y102.147 E0.02306 ; perimeter
G1 X115.184 Y103.361 E0.06062 ; perimeter
G1 X115.455 Y104.269 E0.04390 ; perimeter
G1 X115.708 Y104.836 E0.02876 ; perimeter
G1 X115.784 Y104.942 E0.00601 ; perimeter
G1 X115.826 Y105.192 E0.01176 ; perimeter
G1 X115.761 Y105.437 E0.01171 ; perimeter
G1 X115.660 Y105.552 E0.00712 ; perimeter
G1 X115.520 Y105.626 E0.00732 ; perimeter
G1 X115.283 Y105.632 E0.01097 ; perimeter
G1 X115.088 Y105.597 E0.00919 ; perimeter
G1 X114.957 Y105.488 E0.00787 ; perimeter
G1 X114.883 Y105.038 E0.02116 ; perimeter
G1 X114.909 Y104.836 E0.00940 ; perimeter
G1 X114.838 Y104.588 E0.01199 ; perimeter
G1 X114.804 Y104.317 E0.01261 ; perimeter
G1 X114.606 Y103.935 E0.01995 ; perimeter
G1 X114.337 Y103.286 E0.03253 ; perimeter
G1 X114.064 Y102.693 E0.03023 ; perimeter
G1 X113.871 Y102.370 E0.01746 ; perimeter
G1 X113.888 Y102.004 F10800.000 ; move inwards before travel
G1 X114.119 Y101.990 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.314694
G1 F2400.000
G1 X114.418 Y102.516 E0.01367 ; infill
G1 X114.828 Y103.486 E0.02380 ; infill
G1 X114.933 Y103.783 E0.00712 ; infill
;WIDTH:0.195949
G1 X115.113 Y104.235 E0.00620 ; infill
;WIDTH:0.222441
G1 X115.146 Y104.390 E0.00236 ; infill
;WIDTH:0.261338
G1 X115.182 Y104.517 E0.00240 ; infill
;WIDTH:0.301227
G1 X115.279 Y104.782 E0.00606 ; infill
;WIDTH:0.320244
G1 X115.431 Y105.387 E0.01438 ; infill
G1 X115.441 Y105.387 F10800.000 ; move to first infill point
;WIDTH:0.445555
G1 F2400.000
G1 X115.322 Y105.037 E0.01237 ; infill
;WIDTH:0.430503
G1 X115.210 Y104.294 E0.02421 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.322 Y105.037 E-0.19826 ; wipe and retract
;WIPE_END
G1 E-2.20174 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X114.385 Y102.091 ; move to first infill point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.330313
G1 F2400.000
G1 X113.625 Y101.759 E0.01983 ; infill
;WIDTH:0.299793
G1 X113.301 Y101.572 E0.00798 ; infill
G1 X113.359 Y101.569 F10800.000 ; move to first infill point
;WIDTH:0.409086
G1 F2400.000
G1 X113.963 Y101.885 E0.02074 ; infill
G1 X114.119 Y101.990 E0.00573 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.963 Y101.885 E-0.04965 ; wipe and retract
G1 X113.359 Y101.569 E-0.17978 ; wipe and retract
;WIPE_END
G1 E-2.17057 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X115.522 Y112.048 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.368 Y112.010 E0.00736 ; perimeter
G1 X115.319 Y111.976 E0.00274 ; perimeter
G1 X115.231 Y111.863 E0.00662 ; perimeter
G1 X115.168 Y111.642 E0.01067 ; perimeter
G1 X115.174 Y111.428 E0.00992 ; perimeter
G1 X115.278 Y111.199 E0.01162 ; perimeter
G1 X115.387 Y111.118 E0.00631 ; perimeter
G1 X115.475 Y111.090 E0.00425 ; perimeter
G1 X115.585 Y111.098 E0.00512 ; perimeter
G1 X115.703 Y111.145 E0.00590 ; perimeter
G1 X115.790 Y111.233 E0.00571 ; perimeter
G1 X115.868 Y111.451 E0.01071 ; perimeter
G1 X115.881 Y111.585 E0.00625 ; perimeter
G1 X115.812 Y111.878 E0.01397 ; perimeter
G1 X115.654 Y112.021 E0.00986 ; perimeter
G1 X115.581 Y112.036 E0.00347 ; perimeter
G1 X115.441 Y111.911 F10800.000 ; move inwards before travel
G1 X115.492 Y111.338 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.267902
G1 F2400.000
G1 X115.524 Y111.561 E0.00421 ; infill
G1 X115.493 Y111.792 E0.00437 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.524 Y111.561 E-0.06168 ; wipe and retract
G1 X115.492 Y111.338 E-0.05941 ; wipe and retract
;WIPE_END
G1 E-2.27891 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 X113.617 Y112.997 ; move to first perimeter point
G1 Z25.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.668 Y113.219 E0.01058 ; perimeter
G1 X113.619 Y113.426 E0.00984 ; perimeter
G1 X113.491 Y113.526 E0.00756 ; perimeter
G1 X113.349 Y113.534 E0.00657 ; perimeter
G1 X113.098 Y113.488 E0.01182 ; perimeter
G1 X112.887 Y113.395 E0.01068 ; perimeter
G1 X112.752 Y113.280 E0.00822 ; perimeter
G1 X112.642 Y113.057 E0.01151 ; perimeter
G1 X112.631 Y112.957 E0.00465 ; perimeter
G1 X112.657 Y112.867 E0.00435 ; perimeter
G1 X112.746 Y112.742 E0.00714 ; perimeter
G1 X112.865 Y112.675 E0.00630 ; perimeter
G1 X112.999 Y112.643 E0.00638 ; perimeter
G1 X113.100 Y112.647 E0.00469 ; perimeter
G1 X113.293 Y112.700 E0.00927 ; perimeter
G1 X113.512 Y112.833 E0.01186 ; perimeter
G1 X113.585 Y112.946 E0.00624 ; perimeter
G1 X113.484 Y113.182 F10800.000 ; move inwards before travel
G1 X114.284 Y114.266 ; move to first perimeter point
G1 F1800.000
G1 X114.446 Y114.272 E0.00751 ; perimeter
G1 X115.087 Y114.526 E0.03194 ; perimeter
G1 X115.543 Y114.641 E0.02180 ; perimeter
G1 X115.661 Y114.730 E0.00684 ; perimeter
G1 X115.735 Y114.865 E0.00713 ; perimeter
G1 X115.762 Y114.987 E0.00578 ; perimeter
G1 X115.735 Y115.108 E0.00576 ; perimeter
G1 X115.691 Y115.187 E0.00418 ; perimeter
G1 X115.572 Y115.319 E0.00822 ; perimeter
G1 X115.457 Y115.372 E0.00588 ; perimeter
G1 X115.301 Y115.377 E0.00723 ; perimeter
G1 X114.367 Y115.237 E0.04374 ; perimeter
G1 X114.226 Y115.174 E0.00714 ; perimeter
G1 X114.101 Y115.075 E0.00739 ; perimeter
G1 X113.987 Y114.848 E0.01177 ; perimeter
G1 X113.996 Y114.697 E0.00700 ; perimeter
G1 X114.106 Y114.397 E0.01484 ; perimeter
G1 X114.236 Y114.302 E0.00744 ; perimeter
G1 X114.403 Y114.376 F10800.000 ; move inwards before travel
G1 X114.285 Y114.610 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.451334
G1 F2400.000
G1 X114.467 Y114.777 E0.00840 ; infill
G1 X114.796 Y114.872 E0.01161 ; infill
;WIDTH:0.342964
G1 X115.355 Y114.987 E0.01424 ; infill
;LAYER_CHANGE
;Z:26
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;26
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.796 Y114.872 E-0.15062 ; wipe and retract
;WIPE_END
G1 E-2.24938 F2400.000 ; retract
G1 Z25.875 F10800.000 ; lift Z
G1 Z26.000 ; move to next layer (129)
;AFTER_LAYER_CHANGE
;26
G1 X113.669 Y113.612 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.423 Y113.625 E0.01141 ; perimeter
G1 X113.298 Y113.589 E0.00605 ; perimeter
G1 X113.015 Y113.461 E0.01435 ; perimeter
G1 X112.877 Y113.344 E0.00840 ; perimeter
G1 X112.757 Y113.118 E0.01185 ; perimeter
G1 X112.745 Y113.009 E0.00508 ; perimeter
G1 X112.778 Y112.900 E0.00526 ; perimeter
G1 X112.857 Y112.798 E0.00597 ; perimeter
G1 X112.987 Y112.725 E0.00693 ; perimeter
G1 X113.173 Y112.693 E0.00872 ; perimeter
G1 X113.429 Y112.754 E0.01220 ; perimeter
G1 X113.636 Y112.885 E0.01135 ; perimeter
G1 X113.781 Y113.101 E0.01204 ; perimeter
G1 X113.833 Y113.316 E0.01026 ; perimeter
G1 X113.788 Y113.524 E0.00984 ; perimeter
G1 X113.926 Y113.772 E0.01314 ; perimeter
G1 X113.837 Y113.771 E0.00411 ; perimeter
G1 X113.713 Y113.653 E0.00794 ; perimeter
G1 X113.580 Y113.382 F10800.000 ; move inwards before travel
G1 X114.541 Y114.716 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.648 Y114.778 E0.00418 ; perimeter
G1 X114.584 Y114.753 E0.00231 ; perimeter
G1 X115.767 Y114.978 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.738 Y115.099 E0.00573 ; perimeter
G1 X115.652 Y115.234 E0.00741 ; perimeter
G1 X115.595 Y115.289 E0.00367 ; perimeter
G1 X115.445 Y115.367 E0.00784 ; perimeter
G1 X115.300 Y115.369 E0.00673 ; perimeter
G1 X114.792 Y115.298 E0.02376 ; perimeter
G1 X114.470 Y115.234 E0.01521 ; perimeter
G1 X114.295 Y115.148 E0.00904 ; perimeter
G1 X114.173 Y115.053 E0.00715 ; perimeter
G1 X114.040 Y114.799 E0.01330 ; perimeter
G1 X114.015 Y114.559 E0.01117 ; perimeter
G1 X114.082 Y114.361 E0.00966 ; perimeter
G1 X114.023 Y113.899 E0.02158 ; perimeter
G1 X114.197 Y114.055 E0.01081 ; perimeter
G1 X114.536 Y114.158 E0.01643 ; perimeter
G1 X114.964 Y114.403 E0.02283 ; perimeter
G1 X115.363 Y114.578 E0.02019 ; perimeter
G1 X115.535 Y114.625 E0.00825 ; perimeter
G1 X115.673 Y114.731 E0.00809 ; perimeter
G1 X115.739 Y114.853 E0.00642 ; perimeter
G1 X115.754 Y114.920 E0.00317 ; perimeter
G1 X115.657 Y115.036 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.738 Y115.099 E-0.04738 ; wipe and retract
G1 X115.652 Y115.234 E-0.04219 ; wipe and retract
G1 X115.595 Y115.289 E-0.02092 ; wipe and retract
G1 X115.445 Y115.367 E-0.04467 ; wipe and retract
G1 X115.300 Y115.369 E-0.03831 ; wipe and retract
G1 X114.792 Y115.298 E-0.13538 ; wipe and retract
G1 X114.470 Y115.234 E-0.08664 ; wipe and retract
G1 X114.295 Y115.148 E-0.05150 ; wipe and retract
G1 X114.173 Y115.053 E-0.04075 ; wipe and retract
G1 X114.040 Y114.799 E-0.07578 ; wipe and retract
G1 X114.015 Y114.559 E-0.06365 ; wipe and retract
G1 X114.082 Y114.361 E-0.05505 ; wipe and retract
G1 X114.023 Y113.899 E-0.12292 ; wipe and retract
G1 X114.197 Y114.055 E-0.06161 ; wipe and retract
G1 X114.536 Y114.158 E-0.09361 ; wipe and retract
G1 X114.964 Y114.403 E-0.13005 ; wipe and retract
G1 X115.363 Y114.578 E-0.11502 ; wipe and retract
G1 X115.535 Y114.625 E-0.04698 ; wipe and retract
G1 X115.673 Y114.731 E-0.04610 ; wipe and retract
G1 X115.739 Y114.853 E-0.03658 ; wipe and retract
G1 X115.754 Y114.920 E-0.01805 ; wipe and retract
;WIPE_END
G1 E-1.02687 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X113.050 Y112.966 ; move to first infill point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.29045
G1 F2400.000
G1 X113.442 Y113.251 E0.00997 ; infill
G1 X113.563 Y113.376 E0.00358 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.442 Y113.251 E-0.04584 ; wipe and retract
G1 X113.050 Y112.966 E-0.12777 ; wipe and retract
;WIPE_END
G1 E-2.22639 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X115.273 Y112.016 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.200 Y111.882 E0.00705 ; perimeter
G1 X115.160 Y111.720 E0.00776 ; perimeter
G1 X115.173 Y111.529 E0.00887 ; perimeter
G1 X115.265 Y111.314 E0.01081 ; perimeter
G1 X115.370 Y111.225 E0.00641 ; perimeter
G1 X115.588 Y111.196 E0.01015 ; perimeter
G1 X115.706 Y111.243 E0.00591 ; perimeter
G1 X115.780 Y111.312 E0.00469 ; perimeter
G1 X115.857 Y111.501 E0.00945 ; perimeter
G1 X115.882 Y111.657 E0.00730 ; perimeter
G1 X115.813 Y111.973 E0.01500 ; perimeter
G1 X115.663 Y112.117 E0.00962 ; perimeter
G1 X115.551 Y112.143 E0.00532 ; perimeter
G1 X115.374 Y112.105 E0.00841 ; perimeter
G1 X115.323 Y112.049 E0.00350 ; perimeter
G1 X115.323 Y111.872 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.200 Y111.882 E-0.05465 ; wipe and retract
G1 X115.160 Y111.720 E-0.04420 ; wipe and retract
G1 X115.173 Y111.529 E-0.05052 ; wipe and retract
G1 X115.265 Y111.314 E-0.06161 ; wipe and retract
G1 X115.370 Y111.225 E-0.03653 ; wipe and retract
G1 X115.588 Y111.196 E-0.05780 ; wipe and retract
G1 X115.706 Y111.243 E-0.03368 ; wipe and retract
G1 X115.780 Y111.312 E-0.02673 ; wipe and retract
G1 X115.857 Y111.501 E-0.05386 ; wipe and retract
G1 X115.882 Y111.657 E-0.04161 ; wipe and retract
G1 X115.813 Y111.973 E-0.08545 ; wipe and retract
G1 X115.663 Y112.117 E-0.05480 ; wipe and retract
G1 X115.551 Y112.143 E-0.03030 ; wipe and retract
G1 X115.374 Y112.105 E-0.04790 ; wipe and retract
G1 X115.323 Y112.049 E-0.01993 ; wipe and retract
;WIPE_END
G1 E-1.70044 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X115.321 Y105.099 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.291 Y105.098 E0.00101 ; perimeter
G1 X115.312 Y105.052 E0.00172 ; perimeter
G1 X114.911 Y105.547 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.850 Y105.511 E0.00325 ; perimeter
G1 X114.779 Y105.304 E0.01012 ; perimeter
G1 X114.790 Y105.034 E0.01252 ; perimeter
G1 X114.829 Y104.950 E0.00429 ; perimeter
G1 X114.802 Y104.522 E0.01985 ; perimeter
G1 X114.711 Y104.187 E0.01612 ; perimeter
G1 X114.573 Y103.924 E0.01373 ; perimeter
G1 X114.265 Y103.051 E0.04291 ; perimeter
G1 X114.005 Y102.521 E0.02735 ; perimeter
G1 X113.905 Y102.347 E0.00928 ; perimeter
G1 X113.643 Y102.192 E0.01411 ; perimeter
G1 X113.309 Y102.039 E0.01699 ; perimeter
G1 X112.969 Y101.810 E0.01900 ; perimeter
G1 X112.719 Y101.544 E0.01691 ; perimeter
G1 X112.650 Y101.406 E0.00713 ; perimeter
G1 X112.652 Y101.275 E0.00608 ; perimeter
G1 X112.726 Y101.213 E0.00449 ; perimeter
G1 X112.960 Y101.180 E0.01092 ; perimeter
G1 X113.440 Y101.252 E0.02250 ; perimeter
G1 X113.833 Y101.399 E0.01941 ; perimeter
G1 X114.100 Y101.539 E0.01399 ; perimeter
G1 X114.333 Y101.728 E0.01388 ; perimeter
G1 X114.632 Y102.177 E0.02501 ; perimeter
G1 X115.119 Y103.201 E0.05254 ; perimeter
G1 X115.754 Y104.806 E0.07991 ; perimeter
G1 X115.814 Y105.100 E0.01392 ; perimeter
G1 X115.759 Y105.352 E0.01191 ; perimeter
G1 X115.591 Y105.533 E0.01143 ; perimeter
G1 X115.485 Y105.583 E0.00546 ; perimeter
G1 X115.186 Y105.593 E0.01387 ; perimeter
G1 X114.970 Y105.556 E0.01014 ; perimeter
G1 X114.900 Y105.477 F10800.000 ; move inwards before travel
G1 X115.268 Y104.797 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.397893
G1 F2400.000
G1 X115.196 Y104.473 E0.00980 ; infill
;WIDTH:0.352908
G1 X115.061 Y104.064 E0.01112 ; infill
;WIDTH:0.302295
G1 X114.594 Y102.920 E0.02665 ; infill
;WIDTH:0.26774
G1 X114.321 Y102.354 E0.01175 ; infill
G1 X114.175 Y102.118 E0.00518 ; infill
G1 X113.790 Y101.649 E0.01135 ; infill
G1 X114.362 Y102.207 F10800.000 ; move to first infill point
;WIDTH:0.354374
G1 F2400.000
G1 X113.880 Y101.872 E0.01520 ; infill
G1 X112.990 Y101.431 E0.02573 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.880 Y101.872 E-0.26219 ; wipe and retract
G1 X114.362 Y102.207 E-0.15485 ; wipe and retract
;WIPE_END
G1 E-1.98296 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X110.362 Y97.602 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.152 Y97.802 E0.01345 ; perimeter
G1 X109.444 Y98.048 E0.03474 ; perimeter
G1 X109.151 Y98.015 E0.01367 ; perimeter
G1 X108.831 Y97.775 E0.01851 ; perimeter
G1 X108.815 Y97.655 E0.00561 ; perimeter
G1 X108.969 Y97.453 E0.01176 ; perimeter
G1 X109.155 Y97.362 E0.00960 ; perimeter
G1 X109.211 Y97.315 E0.00338 ; perimeter
G1 X109.470 Y97.258 E0.01228 ; perimeter
G1 X109.736 Y97.160 E0.01311 ; perimeter
G1 X110.015 Y97.165 E0.01292 ; perimeter
G1 X110.063 Y97.151 E0.00235 ; perimeter
G1 X110.155 Y97.193 E0.00467 ; perimeter
G1 X110.373 Y97.338 E0.01213 ; perimeter
G1 X110.399 Y97.463 E0.00592 ; perimeter
G1 X110.388 Y97.547 E0.00393 ; perimeter
G1 X110.072 Y97.593 F10800.000 ; move inwards before travel
G1 X109.156 Y97.717 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.24161
G1 F2400.000
G1 X109.565 Y97.615 E0.00698 ; infill
G1 X109.799 Y97.532 E0.00409 ; infill
G1 X109.971 Y97.505 E0.00288 ; infill
G1 X110.108 Y97.451 E0.00243 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.971 Y97.505 E-0.03881 ; wipe and retract
G1 X109.799 Y97.532 E-0.04601 ; wipe and retract
G1 X109.565 Y97.615 E-0.06529 ; wipe and retract
G1 X109.156 Y97.717 E-0.11143 ; wipe and retract
;WIPE_END
G1 E-2.13846 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X105.580 Y95.556 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X105.062 Y95.455 E0.01786 ; perimeter
G1 X105.410 Y95.430 E0.01183 ; perimeter
G1 X105.517 Y95.462 E0.00378 ; perimeter
G1 X105.546 Y95.506 E0.00178 ; perimeter
G1 X103.739 Y95.488 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.465 Y95.601 E0.01003 ; perimeter
G1 X103.255 Y95.722 E0.00821 ; perimeter
G1 X103.401 Y95.546 E0.00775 ; perimeter
G1 X103.469 Y95.514 E0.00255 ; perimeter
G1 X103.679 Y95.491 E0.00713 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.465 Y95.601 E-0.06349 ; wipe and retract
G1 X103.255 Y95.722 E-0.06399 ; wipe and retract
G1 X103.401 Y95.546 E-0.06041 ; wipe and retract
G1 X103.469 Y95.514 E-0.01985 ; wipe and retract
G1 X103.679 Y95.491 E-0.05562 ; wipe and retract
;WIPE_END
G1 E-2.13663 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X106.461 Y95.693 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.649 Y95.713 E0.00874 ; perimeter
G1 X107.423 Y95.581 E0.03640 ; perimeter
G1 X107.657 Y95.678 E0.01169 ; perimeter
G1 X107.711 Y95.737 E0.00373 ; perimeter
G1 X107.736 Y95.818 E0.00394 ; perimeter
G1 X107.722 Y95.998 E0.00834 ; perimeter
G1 X107.619 Y96.223 E0.01147 ; perimeter
G1 X107.561 Y96.273 E0.00354 ; perimeter
G1 X107.432 Y96.454 E0.01029 ; perimeter
G1 X107.259 Y96.534 E0.00883 ; perimeter
G1 X107.186 Y96.631 E0.00564 ; perimeter
G1 X107.129 Y96.633 E0.00264 ; perimeter
G1 X106.684 Y96.548 E0.02098 ; perimeter
G1 X106.124 Y96.205 E0.03042 ; perimeter
G1 X105.827 Y96.103 E0.01453 ; perimeter
G1 X104.826 Y95.903 E0.04730 ; perimeter
G1 X104.411 Y95.867 E0.01931 ; perimeter
G1 X104.009 Y95.899 E0.01869 ; perimeter
G1 X103.677 Y96.035 E0.01658 ; perimeter
G1 X103.391 Y96.200 E0.01531 ; perimeter
G1 X103.211 Y96.381 E0.01183 ; perimeter
G1 X102.954 Y96.542 E0.01406 ; perimeter
G1 X102.705 Y96.645 E0.01245 ; perimeter
G1 X102.239 Y97.102 E0.03027 ; perimeter
G1 X101.854 Y97.386 E0.02215 ; perimeter
G1 X101.585 Y97.666 E0.01797 ; perimeter
G1 X101.450 Y98.112 E0.02159 ; perimeter
G1 X101.361 Y98.596 E0.02277 ; perimeter
G1 X101.324 Y99.201 E0.02810 ; perimeter
G1 X101.352 Y99.382 E0.00848 ; perimeter
G1 X101.382 Y99.454 E0.00363 ; perimeter
G1 X101.355 Y99.759 E0.01419 ; perimeter
G1 X101.270 Y99.883 E0.00696 ; perimeter
G1 X101.241 Y99.991 E0.00518 ; perimeter
G1 X101.140 Y100.113 E0.00733 ; perimeter
G1 X100.990 Y100.162 E0.00730 ; perimeter
G1 X100.844 Y100.305 E0.00948 ; perimeter
G1 X100.688 Y100.361 E0.00769 ; perimeter
G1 X100.603 Y100.352 E0.00395 ; perimeter
G1 X100.460 Y100.214 E0.00920 ; perimeter
G1 X100.396 Y100.047 E0.00828 ; perimeter
G1 X100.370 Y99.828 E0.01020 ; perimeter
G1 X100.472 Y99.277 E0.02599 ; perimeter
G1 X100.566 Y98.899 E0.01801 ; perimeter
G1 X100.782 Y97.360 E0.07201 ; perimeter
G1 X100.903 Y97.046 E0.01558 ; perimeter
G1 X101.044 Y96.857 E0.01095 ; perimeter
G1 X101.223 Y96.706 E0.01084 ; perimeter
G1 X101.591 Y96.527 E0.01897 ; perimeter
G1 X101.825 Y96.514 E0.01085 ; perimeter
G1 X102.269 Y96.242 E0.02411 ; perimeter
G1 X102.445 Y96.055 E0.01193 ; perimeter
G1 X102.741 Y95.642 E0.02352 ; perimeter
G1 X102.835 Y95.472 E0.00900 ; perimeter
G1 X103.123 Y95.144 E0.02022 ; perimeter
G1 X103.337 Y95.044 E0.01094 ; perimeter
G1 X103.703 Y95.004 E0.01704 ; perimeter
G1 X104.183 Y95.029 E0.02225 ; perimeter
G1 X104.830 Y95.008 E0.02999 ; perimeter
G1 X104.986 Y94.977 E0.00738 ; perimeter
G1 X105.427 Y94.946 E0.02049 ; perimeter
G1 X105.522 Y94.959 E0.00442 ; perimeter
G1 X105.636 Y94.983 E0.00541 ; perimeter
G1 X105.819 Y95.074 E0.00946 ; perimeter
G1 X105.884 Y95.143 E0.00437 ; perimeter
G1 X106.127 Y95.508 E0.02032 ; perimeter
G1 X106.409 Y95.664 E0.01492 ; perimeter
G1 X106.498 Y95.877 F10800.000 ; move inwards before travel
G1 X106.261 Y95.931 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.183288
G1 F2400.000
G1 X107.119 Y96.333 E0.01106 ; infill
G1 X107.280 Y96.252 F10800.000 ; move to first infill point
;WIDTH:0.32956
G1 F2400.000
G1 X106.137 Y95.955 E0.02815 ; infill
G1 X106.261 Y95.931 F10800.000 ; move to first infill point
;WIDTH:0.172575
G1 F2400.000
G1 X106.058 Y95.840 E0.00240 ; infill
G1 X104.820 Y95.455 F10800.000 ; move to first infill point
;WIDTH:0.430127
G1 F2400.000
G1 X104.427 Y95.444 E0.01265 ; infill
;WIDTH:0.406681
G1 X103.978 Y95.459 E0.01360 ; infill
G1 X103.104 Y95.917 F10800.000 ; move to first infill point
;WIDTH:0.161561
G1 F2400.000
G1 X102.462 Y96.469 E0.00835 ; infill
;WIDTH:0.153893
G1 X102.153 Y96.711 E0.00362 ; infill
;WIDTH:0.282407
G1 X101.906 Y96.884 E0.00601 ; infill
G1 X100.987 Y97.662 F10800.000 ; move to first infill point
;WIDTH:0.459537
G1 F2400.000
G1 X101.391 Y97.184 E0.02171 ; infill
G1 X101.480 Y97.101 E0.00420 ; infill
G1 X101.703 Y96.957 E0.00919 ; infill
G1 X101.535 Y96.822 F10800.000 ; move to first infill point
;WIDTH:0.432213
G1 F2400.000
G1 X101.200 Y97.465 E0.02349 ; infill
;WIDTH:0.417428
G1 X101.139 Y97.751 E0.00909 ; infill
;WIDTH:0.366311
G1 X101.083 Y98.015 E0.00725 ; infill
;WIDTH:0.320365
G1 X101.046 Y98.246 E0.00539 ; infill
;WIDTH:0.305917
G1 X100.995 Y98.543 E0.00660 ; infill
;WIDTH:0.298635
G1 X100.913 Y99.202 E0.01412 ; infill
;WIDTH:0.39213
G1 X100.837 Y99.974 E0.02252 ; infill
G1 X100.777 Y100.034 F10800.000 ; move to first infill point
;WIDTH:0.459952
G1 F2400.000
G1 X100.846 Y99.726 E0.01092 ; infill
;WIDTH:0.478755
G1 X101.099 Y98.936 E0.03009 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.846 Y99.726 E-0.21911 ; wipe and retract
;WIPE_END
G1 E-2.18089 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X104.713 Y107.123 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.508 Y107.148 E0.00957 ; perimeter
G1 X104.355 Y107.043 E0.00860 ; perimeter
G1 X104.153 Y107.005 E0.00951 ; perimeter
G1 X104.003 Y106.898 E0.00855 ; perimeter
G1 X103.894 Y106.756 E0.00827 ; perimeter
G1 X103.826 Y106.619 E0.00711 ; perimeter
G1 X103.787 Y106.473 E0.00697 ; perimeter
G1 X103.777 Y106.138 E0.01555 ; perimeter
G1 X103.813 Y105.654 E0.02247 ; perimeter
G1 X103.779 Y105.596 E0.00313 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.754 Y105.552 E0.00211 ; perimeter (bridge)
G1 X103.785 Y105.590 E0.00206 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.040 Y105.846 E0.01673 ; perimeter
G1 X104.237 Y105.826 E0.00918 ; perimeter
G1 X104.425 Y105.975 E0.01112 ; perimeter
G1 X104.614 Y106.328 E0.01856 ; perimeter
G1 X104.706 Y107.063 E0.03430 ; perimeter
G1 X104.520 Y107.050 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.508 Y107.148 E-0.05673 ; wipe and retract
G1 X104.355 Y107.043 E-0.04901 ; wipe and retract
G1 X104.153 Y107.005 E-0.05420 ; wipe and retract
G1 X104.003 Y106.898 E-0.04871 ; wipe and retract
G1 X103.894 Y106.756 E-0.04711 ; wipe and retract
G1 X103.826 Y106.619 E-0.04050 ; wipe and retract
G1 X103.787 Y106.473 E-0.03973 ; wipe and retract
G1 X103.777 Y106.138 E-0.08857 ; wipe and retract
G1 X103.813 Y105.654 E-0.12799 ; wipe and retract
G1 X103.779 Y105.596 E-0.01780 ; wipe and retract
;WIPE_END
G1 E-1.82966 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X102.151 Y103.857 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.987 Y103.765 E0.00636 ; perimeter
G1 X102.041 Y103.719 E0.00240 ; perimeter
G1 X102.121 Y103.708 E0.00272 ; perimeter
G1 X102.139 Y103.799 E0.00313 ; perimeter
G1 X102.626 Y103.773 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.275 Y104.684 E0.05182 ; perimeter
G1 X103.364 Y104.847 E0.00858 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.540 Y105.169 E0.01535 ; perimeter (bridge)
G1 X103.603 Y105.350 E0.00801 ; perimeter (bridge)
G1 X103.669 Y105.438 E0.00459 ; perimeter (bridge)
G1 X103.241 Y105.111 E0.02248 ; perimeter (bridge)
G1 X103.060 Y105.015 E0.00856 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.980 Y104.972 E0.00423 ; perimeter
G1 X102.598 Y104.669 E0.02257 ; perimeter
G1 X102.267 Y104.451 E0.01838 ; perimeter
G1 X101.719 Y104.182 E0.02828 ; perimeter
G1 X101.520 Y103.973 E0.01335 ; perimeter
G1 X101.460 Y103.807 E0.00819 ; perimeter
G1 X101.456 Y103.673 E0.00620 ; perimeter
G1 X101.493 Y103.555 E0.00576 ; perimeter
G1 X101.719 Y103.360 E0.01381 ; perimeter
G1 X101.752 Y103.301 E0.00313 ; perimeter
G1 X102.009 Y103.208 E0.01266 ; perimeter
G1 X102.130 Y103.223 E0.00562 ; perimeter
G1 X102.244 Y103.197 E0.00544 ; perimeter
G1 X102.428 Y103.258 E0.00895 ; perimeter
G1 X102.463 Y103.288 E0.00216 ; perimeter
G1 X102.563 Y103.465 E0.00943 ; perimeter
G1 X102.614 Y103.714 E0.01177 ; perimeter
G1 X102.425 Y104.119 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.275 Y104.684 E-0.30974 ; wipe and retract
G1 X103.364 Y104.847 E-0.04887 ; wipe and retract
;WIPE_END
G1 E-2.04139 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X105.002 Y107.504 ; move to first perimeter point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X105.371 Y107.499 E0.01706 ; perimeter
G1 X105.887 Y107.653 E0.02496 ; perimeter
G1 X106.324 Y107.829 E0.02180 ; perimeter
G1 X106.926 Y108.125 E0.03112 ; perimeter
G1 X107.278 Y108.325 E0.01871 ; perimeter
G1 X107.628 Y108.602 E0.02070 ; perimeter
G1 X107.930 Y108.738 E0.01534 ; perimeter
G1 X108.534 Y109.075 E0.03201 ; perimeter
G1 X108.647 Y109.312 E0.01215 ; perimeter
G1 X108.637 Y109.380 E0.00316 ; perimeter
G1 X108.547 Y109.529 E0.00807 ; perimeter
G1 X108.394 Y109.586 E0.00759 ; perimeter
G1 X108.275 Y109.699 E0.00760 ; perimeter
G1 X108.224 Y109.717 E0.00252 ; perimeter
G1 X108.013 Y109.739 E0.00982 ; perimeter
G1 X107.753 Y109.649 E0.01274 ; perimeter
G1 X107.487 Y109.450 E0.01540 ; perimeter
G1 X107.305 Y109.263 E0.01210 ; perimeter
G1 X106.224 Y108.644 E0.05768 ; perimeter
G1 X105.454 Y108.060 E0.04476 ; perimeter
G1 X105.062 Y107.627 E0.02704 ; perimeter
G1 X105.027 Y107.558 E0.00361 ; perimeter
G1 X105.355 Y107.608 F10800.000 ; move inwards before travel
G1 X105.609 Y107.842 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.100365
G1 F2400.000
G1 X105.637 Y107.860 E0.00016 ; infill
;WIDTH:0.130679
G1 X105.713 Y107.898 E0.00062 ; infill
;WIDTH:0.160995
G1 X105.788 Y107.937 E0.00083 ; infill
;WIDTH:0.200645
G1 X105.918 Y108.010 E0.00195 ; infill
;WIDTH:0.240296
G1 X106.047 Y108.084 E0.00245 ; infill
;WIDTH:0.279948
G1 X106.177 Y108.157 E0.00294 ; infill
;WIDTH:0.301376
G1 X107.054 Y108.658 E0.02170 ; infill
G1 X107.518 Y108.958 E0.01188 ; infill
;WIDTH:0.310076
G1 X107.550 Y108.977 E0.00082 ; infill
;WIDTH:0.353798
G1 X107.646 Y109.045 E0.00303 ; infill
;WIDTH:0.39752
G1 X107.742 Y109.112 E0.00346 ; infill
;WIDTH:0.408901
G1 X107.773 Y109.136 E0.00120 ; infill
;WIDTH:0.417199
G1 X107.942 Y109.249 E0.00634 ; infill
G1 X108.064 Y109.303 E0.00414 ; infill
G1 X108.321 Y109.356 E0.00816 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.064 Y109.303 E-0.06921 ; wipe and retract
G1 X107.942 Y109.249 E-0.03515 ; wipe and retract
G1 X107.773 Y109.136 E-0.05372 ; wipe and retract
;WIPE_END
G1 E-2.24192 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X104.428 Y106.785 ; move to first infill point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.284443
G1 F2400.000
G1 X104.077 Y106.084 E0.01574 ; infill
G1 X104.066 Y106.086 F10800.000 ; move to first infill point
;WIDTH:0.388503
G1 F2400.000
G1 X104.212 Y106.456 E0.01146 ; infill
G1 X104.311 Y106.790 E0.00999 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.212 Y106.456 E-0.09171 ; wipe and retract
G1 X104.066 Y106.086 E-0.10520 ; wipe and retract
;WIPE_END
G1 E-2.20308 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 X102.831 Y104.516 ; move to first infill point
G1 Z26.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.11691
G1 F2400.000
G1 X102.609 Y104.296 E0.00193 ; infill
;WIDTH:0.217009
G1 X102.456 Y104.149 E0.00306 ; infill
;LAYER_CHANGE
;Z:26.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;26.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.609 Y104.296 E-0.05570 ; wipe and retract
;WIPE_END
G1 E-2.34430 F2400.000 ; retract
G1 Z26.075 F10800.000 ; lift Z
G1 Z26.200 ; move to next layer (130)
;AFTER_LAYER_CHANGE
;26.2
G1 Z26.275 ; lift Z
G1 X115.186 Y105.112 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.275 Y104.897 E0.00785 ; perimeter
G1 X115.305 Y105.011 E0.00397 ; perimeter
G1 X115.290 Y105.081 E0.00242 ; perimeter
G1 X115.245 Y105.099 E0.00163 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.275 Y104.897 E-0.05388 ; wipe and retract
G1 X115.305 Y105.011 E-0.03094 ; wipe and retract
G1 X115.290 Y105.081 E-0.01886 ; wipe and retract
G1 X115.245 Y105.099 E-0.01273 ; wipe and retract
;WIPE_END
G1 E-2.28359 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X114.015 Y102.279 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.781 Y102.219 E0.01120 ; perimeter
G1 X113.652 Y102.130 E0.00727 ; perimeter
G1 X113.388 Y102.063 E0.01260 ; perimeter
G1 X112.858 Y101.796 E0.02750 ; perimeter
G1 X112.601 Y101.614 E0.01455 ; perimeter
G1 X112.443 Y101.442 E0.01084 ; perimeter
G1 X112.337 Y101.254 E0.01000 ; perimeter
G1 X112.335 Y101.124 E0.00602 ; perimeter
G1 X112.461 Y101.022 E0.00754 ; perimeter
G1 X112.705 Y101.020 E0.01132 ; perimeter
G1 X113.197 Y101.125 E0.02330 ; perimeter
G1 X113.604 Y101.303 E0.02056 ; perimeter
G1 X113.750 Y101.413 E0.00849 ; perimeter
G1 X113.919 Y101.506 E0.00892 ; perimeter
G1 X113.994 Y101.592 E0.00532 ; perimeter
G1 X114.170 Y101.731 E0.01036 ; perimeter
G1 X114.533 Y102.282 E0.03059 ; perimeter
G1 X114.949 Y102.975 E0.03746 ; perimeter
G1 X115.416 Y103.965 E0.05069 ; perimeter
G1 X115.731 Y104.737 E0.03864 ; perimeter
G1 X115.800 Y105.000 E0.01257 ; perimeter
G1 X115.741 Y105.275 E0.01302 ; perimeter
G1 X115.629 Y105.425 E0.00871 ; perimeter
G1 X115.519 Y105.521 E0.00675 ; perimeter
G1 X115.120 Y105.618 E0.01899 ; perimeter
G1 X114.737 Y105.664 E0.01790 ; perimeter
G1 X114.573 Y105.598 E0.00820 ; perimeter
G1 X114.561 Y105.461 E0.00636 ; perimeter
G1 X114.662 Y105.269 E0.01006 ; perimeter
G1 X114.689 Y105.039 E0.01070 ; perimeter
G1 X114.788 Y104.825 E0.01094 ; perimeter
G1 X114.775 Y104.613 E0.00982 ; perimeter
G1 X114.692 Y104.311 E0.01450 ; perimeter
G1 X114.676 Y104.147 E0.00765 ; perimeter
G1 X114.270 Y102.806 E0.06491 ; perimeter
G1 X114.041 Y102.333 E0.02433 ; perimeter
G1 X114.028 Y102.037 F10800.000 ; move inwards before travel
G1 X113.991 Y101.897 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.295523
G1 F2400.000
G1 X113.541 Y101.719 E0.01016 ; infill
G1 X113.089 Y101.489 E0.01067 ; infill
G1 X112.696 Y101.361 E0.00868 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.089 Y101.489 E-0.10906 ; wipe and retract
G1 X113.541 Y101.719 E-0.13404 ; wipe and retract
G1 X113.991 Y101.897 E-0.12764 ; wipe and retract
;WIPE_END
G1 E-2.02927 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X114.555 Y102.834 ; move to first infill point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.132062
G1 F2400.000
G1 X114.618 Y102.976 E0.00116 ; infill
;WIDTH:0.167204
G1 X114.682 Y103.119 E0.00161 ; infill
;WIDTH:0.216437
G1 X114.802 Y103.432 E0.00485 ; infill
;WIDTH:0.26567
G1 X114.923 Y103.746 E0.00623 ; infill
;WIDTH:0.321537
G1 X115.052 Y104.086 E0.00842 ; infill
;WIDTH:0.333935
G1 X115.062 Y104.121 E0.00088 ; infill
;WIDTH:0.368627
G1 X115.091 Y104.237 E0.00325 ; infill
;WIDTH:0.400708
G1 X115.234 Y104.660 E0.01327 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.091 Y104.237 E-0.11770 ; wipe and retract
;WIPE_END
G1 E-2.28230 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X110.177 Y97.540 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X110.075 Y97.730 E0.01002 ; perimeter
G1 X109.941 Y97.843 E0.00811 ; perimeter
G1 X109.451 Y98.149 E0.02675 ; perimeter
G1 X109.449 Y98.216 E0.00309 ; perimeter
G1 X109.165 Y98.250 E0.01321 ; perimeter
G1 X108.546 Y97.860 E0.03391 ; perimeter
G1 X108.312 Y97.677 E0.01375 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X107.999 Y97.416 E0.01702 ; perimeter (bridge)
G1 X108.173 Y97.508 E0.00822 ; perimeter (bridge)
G1 X108.305 Y97.486 E0.00560 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.618 Y97.434 E0.01472 ; perimeter
G1 X108.818 Y97.346 E0.01012 ; perimeter
G1 X109.082 Y97.323 E0.01224 ; perimeter
G1 X109.526 Y97.234 E0.02100 ; perimeter
G1 X109.874 Y97.234 E0.01610 ; perimeter
G1 X110.160 Y97.412 E0.01559 ; perimeter
G1 X110.171 Y97.480 E0.00321 ; perimeter
G1 X109.983 Y97.635 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.075 Y97.730 E-0.07081 ; wipe and retract
G1 X109.941 Y97.843 E-0.04621 ; wipe and retract
G1 X109.451 Y98.149 E-0.15240 ; wipe and retract
G1 X109.449 Y98.216 E-0.01760 ; wipe and retract
G1 X109.165 Y98.250 E-0.07528 ; wipe and retract
G1 X108.546 Y97.860 E-0.19316 ; wipe and retract
G1 X108.312 Y97.677 E-0.07836 ; wipe and retract
;WIPE_END
G1 E-1.76619 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X101.042 Y99.549 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X100.920 Y99.630 E0.00498 ; perimeter
G1 X100.967 Y99.347 E0.00972 ; perimeter
G1 X100.979 Y99.432 E0.00293 ; perimeter
G1 X101.014 Y99.496 E0.00245 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.920 Y99.630 E-0.04320 ; wipe and retract
G1 X100.967 Y99.347 E-0.07575 ; wipe and retract
G1 X100.979 Y99.432 E-0.02282 ; wipe and retract
G1 X101.014 Y99.496 E-0.01908 ; wipe and retract
;WIPE_END
G1 E-2.23916 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X102.931 Y96.276 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.223 Y95.922 E0.01553 ; perimeter
G1 X103.320 Y95.750 E0.00670 ; perimeter
G1 X103.403 Y95.652 E0.00433 ; perimeter
G1 X103.504 Y95.568 E0.00446 ; perimeter
G1 X103.767 Y95.524 E0.00905 ; perimeter
G1 X105.344 Y95.485 E0.05339 ; perimeter
G1 X105.758 Y95.910 E0.02007 ; perimeter
G1 X105.621 Y95.870 E0.00484 ; perimeter
G1 X105.150 Y95.834 E0.01599 ; perimeter
G1 X104.801 Y95.742 E0.01221 ; perimeter
G1 X104.396 Y95.743 E0.01369 ; perimeter
G1 X103.646 Y95.848 E0.02564 ; perimeter
G1 X103.202 Y96.165 E0.01846 ; perimeter
G1 X102.987 Y96.253 E0.00788 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.223 Y95.922 E-0.10737 ; wipe and retract
G1 X103.320 Y95.750 E-0.05220 ; wipe and retract
G1 X103.403 Y95.652 E-0.03372 ; wipe and retract
G1 X103.504 Y95.568 E-0.03475 ; wipe and retract
G1 X103.767 Y95.524 E-0.07055 ; wipe and retract
G1 X105.344 Y95.485 E-0.41622 ; wipe and retract
G1 X105.758 Y95.910 E-0.15651 ; wipe and retract
G1 X105.621 Y95.870 E-0.03776 ; wipe and retract
G1 X105.150 Y95.834 E-0.12468 ; wipe and retract
G1 X104.801 Y95.742 E-0.09521 ; wipe and retract
G1 X104.396 Y95.743 E-0.10672 ; wipe and retract
G1 X103.646 Y95.848 E-0.19991 ; wipe and retract
G1 X103.202 Y96.165 E-0.14394 ; wipe and retract
G1 X102.987 Y96.253 E-0.06144 ; wipe and retract
;WIPE_END
G1 E-0.75902 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X106.493 Y96.192 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.663 Y96.216 E0.00582 ; perimeter
G1 X107.059 Y96.153 E0.01358 ; perimeter
G1 X106.966 Y96.376 E0.00818 ; perimeter
G1 X106.616 Y96.273 E0.01236 ; perimeter
G1 X106.543 Y96.225 E0.00297 ; perimeter
G1 X107.378 Y96.628 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.417 Y96.850 E0.01042 ; perimeter
G1 X107.323 Y97.031 E0.00947 ; perimeter
G1 X107.032 Y96.898 E0.01479 ; perimeter
G1 X106.411 Y96.715 E0.03002 ; perimeter
G1 X106.105 Y96.513 E0.01698 ; perimeter
G1 X105.534 Y96.347 E0.02754 ; perimeter
G1 X105.069 Y96.311 E0.02160 ; perimeter
G1 X104.739 Y96.224 E0.01580 ; perimeter
G1 X104.431 Y96.225 E0.01428 ; perimeter
G1 X103.830 Y96.309 E0.02811 ; perimeter
G1 X103.437 Y96.589 E0.02234 ; perimeter
G1 X102.592 Y96.938 E0.04234 ; perimeter
G1 X102.540 Y96.989 E0.00338 ; perimeter
G1 X102.090 Y97.241 E0.02390 ; perimeter
G1 X101.978 Y97.323 E0.00642 ; perimeter
G1 X101.552 Y97.768 E0.02851 ; perimeter
G1 X101.335 Y98.539 E0.03710 ; perimeter
G1 X101.444 Y99.278 E0.03462 ; perimeter
G1 X101.547 Y99.469 E0.01009 ; perimeter
G1 X101.543 Y99.718 E0.01151 ; perimeter
G1 X101.430 Y99.887 E0.00942 ; perimeter
G1 X101.270 Y99.974 E0.00840 ; perimeter
G1 X101.217 Y100.040 E0.00394 ; perimeter
G1 X100.974 Y100.119 E0.01185 ; perimeter
G1 X100.652 Y100.140 E0.01492 ; perimeter
G1 X100.509 Y100.002 E0.00921 ; perimeter
G1 X100.462 Y99.868 E0.00657 ; perimeter
G1 X100.430 Y99.636 E0.01085 ; perimeter
G1 X100.792 Y97.454 E0.10247 ; perimeter
G1 X101.070 Y96.917 E0.02803 ; perimeter
G1 X101.374 Y96.684 E0.01773 ; perimeter
G1 X102.103 Y96.351 E0.03710 ; perimeter
G1 X102.456 Y96.095 E0.02023 ; perimeter
G1 X102.824 Y95.649 E0.02674 ; perimeter
G1 X102.922 Y95.473 E0.00936 ; perimeter
G1 X103.062 Y95.309 E0.01001 ; perimeter
G1 X103.268 Y95.137 E0.01241 ; perimeter
G1 X103.326 Y95.109 E0.00300 ; perimeter
G1 X103.718 Y95.043 E0.01838 ; perimeter
G1 X104.152 Y95.026 E0.02014 ; perimeter
G1 X104.389 Y95.038 E0.01098 ; perimeter
G1 X105.315 Y94.994 E0.04295 ; perimeter
G1 X105.477 Y95.017 E0.00758 ; perimeter
G1 X105.631 Y95.082 E0.00776 ; perimeter
G1 X105.864 Y95.345 E0.01628 ; perimeter
G1 X106.129 Y95.598 E0.01695 ; perimeter
G1 X106.315 Y95.680 E0.00942 ; perimeter
G1 X106.649 Y95.727 E0.01562 ; perimeter
G1 X106.863 Y95.685 E0.01008 ; perimeter
G1 X107.202 Y95.658 E0.01576 ; perimeter
G1 X107.347 Y95.672 E0.00674 ; perimeter
G1 X107.514 Y95.747 E0.00849 ; perimeter
G1 X107.586 Y95.830 E0.00511 ; perimeter
G1 X107.637 Y95.965 E0.00666 ; perimeter
G1 X107.625 Y96.066 E0.00472 ; perimeter
G1 X107.495 Y96.360 E0.01490 ; perimeter
G1 X107.502 Y96.394 E0.00160 ; perimeter
G1 X107.406 Y96.575 E0.00950 ; perimeter
G1 X107.181 Y96.736 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.417 Y96.850 E-0.07253 ; wipe and retract
G1 X107.323 Y97.031 E-0.05393 ; wipe and retract
G1 X107.032 Y96.898 E-0.08428 ; wipe and retract
G1 X106.411 Y96.715 E-0.17100 ; wipe and retract
G1 X106.105 Y96.513 E-0.09671 ; wipe and retract
G1 X105.534 Y96.347 E-0.15691 ; wipe and retract
G1 X105.069 Y96.311 E-0.12305 ; wipe and retract
G1 X104.739 Y96.224 E-0.09003 ; wipe and retract
G1 X104.431 Y96.225 E-0.08135 ; wipe and retract
G1 X103.830 Y96.309 E-0.16015 ; wipe and retract
G1 X103.437 Y96.589 E-0.12730 ; wipe and retract
G1 X102.592 Y96.938 E-0.24119 ; wipe and retract
G1 X102.540 Y96.989 E-0.01924 ; wipe and retract
G1 X102.090 Y97.241 E-0.13617 ; wipe and retract
G1 X101.978 Y97.323 E-0.03660 ; wipe and retract
G1 X101.552 Y97.768 E-0.16244 ; wipe and retract
G1 X101.335 Y98.539 E-0.21135 ; wipe and retract
G1 X101.444 Y99.278 E-0.19723 ; wipe and retract
G1 X101.547 Y99.469 E-0.05746 ; wipe and retract
G1 X101.547 Y99.474 E-0.00107 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X108.982 Y97.853 ; move to first infill point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.379552
G1 F2400.000
G1 X109.855 Y97.506 E0.02628 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.982 Y97.853 E-0.24772 ; wipe and retract
;WIPE_END
G1 E-2.15228 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X102.736 Y96.418 ; move to first infill point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.373473
G1 F2400.000
G1 X102.570 Y96.511 E0.00523 ; infill
;WIDTH:0.348387
G1 X102.404 Y96.603 E0.00483 ; infill
;WIDTH:0.323301
G1 X102.308 Y96.678 E0.00283 ; infill
G1 X101.684 Y97.012 E0.01651 ; infill
;WIDTH:0.452267
G1 X101.434 Y97.221 E0.01108 ; infill
G1 X101.288 Y97.426 E0.00855 ; infill
;WIDTH:0.415895
G1 X101.215 Y97.528 E0.00389 ; infill
;WIDTH:0.380258
G1 X101.178 Y97.600 E0.00226 ; infill
;WIDTH:0.371777
G1 X101.112 Y97.897 E0.00833 ; infill
;WIDTH:0.337997
G1 X101.046 Y98.194 E0.00748 ; infill
;WIDTH:0.304216
G1 X100.979 Y98.492 E0.00662 ; infill
;WIDTH:0.275294
G1 X100.970 Y98.917 E0.00822 ; infill
;WIDTH:0.395862
G1 X100.969 Y99.106 E0.00554 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X100.970 Y98.917 E-0.04981 ; wipe and retract
;WIPE_END
G1 E-2.35019 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X102.224 Y103.621 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.286 Y103.927 E0.01057 ; perimeter
G1 X102.228 Y103.898 E0.00222 ; perimeter
G1 X102.109 Y103.770 E0.00591 ; perimeter
G1 X102.192 Y103.671 E0.00435 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.286 Y103.927 E-0.07195 ; wipe and retract
G1 X102.228 Y103.898 E-0.01728 ; wipe and retract
G1 X102.109 Y103.770 E-0.04607 ; wipe and retract
G1 X102.192 Y103.671 E-0.03392 ; wipe and retract
;WIPE_END
G1 E-2.23079 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X103.662 Y105.776 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.209 Y105.338 E0.02918 ; perimeter
G1 X102.515 Y104.727 E0.04284 ; perimeter
G1 X102.243 Y104.442 E0.01823 ; perimeter
G1 X101.935 Y104.291 E0.01591 ; perimeter
G1 X101.667 Y104.002 E0.01823 ; perimeter
G1 X101.593 Y103.767 E0.01143 ; perimeter
G1 X101.633 Y103.543 E0.01055 ; perimeter
G1 X101.784 Y103.413 E0.00920 ; perimeter
G1 X101.918 Y103.207 E0.01142 ; perimeter
G1 X102.093 Y103.135 E0.00876 ; perimeter
G1 X102.237 Y103.022 E0.00847 ; perimeter
G1 X102.404 Y102.974 E0.00802 ; perimeter
G1 X102.500 Y103.003 E0.00468 ; perimeter
G1 X102.589 Y103.168 E0.00869 ; perimeter
G1 X102.632 Y103.204 E0.00259 ; perimeter
G1 X102.761 Y103.839 E0.03002 ; perimeter
G1 X103.322 Y104.527 E0.04111 ; perimeter
G1 X103.567 Y104.859 E0.01911 ; perimeter
G1 X103.691 Y105.063 E0.01106 ; perimeter
G1 X103.892 Y105.311 E0.01478 ; perimeter
G1 X104.408 Y105.809 E0.03324 ; perimeter
G1 X104.571 Y106.134 E0.01684 ; perimeter
G1 X104.630 Y106.462 E0.01546 ; perimeter
G1 X104.521 Y106.697 E0.01198 ; perimeter
G1 X104.530 Y106.791 E0.00437 ; perimeter
G1 X104.512 Y106.815 E0.00139 ; perimeter
G1 X104.332 Y106.880 E0.00889 ; perimeter
G1 X104.122 Y106.839 E0.00992 ; perimeter
G1 X103.917 Y106.679 E0.01202 ; perimeter
G1 X103.765 Y106.374 E0.01579 ; perimeter
G1 X103.762 Y106.224 E0.00696 ; perimeter
G1 X103.657 Y106.000 E0.01144 ; perimeter
G1 X103.661 Y105.836 E0.00763 ; perimeter
G1 X103.832 Y105.414 F10800.000 ; move inwards before travel
G1 X103.903 Y105.769 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.298871
G1 F2400.000
G1 X104.000 Y105.903 E0.00353 ; infill
;WIDTH:0.326555
G1 X104.132 Y106.111 E0.00580 ; infill
;WIDTH:0.342961
G1 X104.302 Y106.597 E0.01284 ; infill
G1 X104.224 Y106.612 F10800.000 ; move to first infill point
;WIDTH:0.34631
G1 F2400.000
G1 X104.222 Y106.412 E0.00506 ; infill
G1 X104.175 Y106.270 E0.00378 ; infill
G1 X104.143 Y105.888 E0.00967 ; infill
G1 X103.492 Y105.241 F10800.000 ; move to first infill point
;WIDTH:0.0972218
G1 F2400.000
G1 X103.315 Y105.028 E0.00125 ; infill
;WIDTH:0.208094
G1 X102.913 Y104.596 E0.00810 ; infill
;WIDTH:0.314988
G1 X102.745 Y104.419 E0.00554 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.913 Y104.596 E-0.06460 ; wipe and retract
;WIPE_END
G1 E-2.33540 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X105.635 Y107.854 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.914 Y107.853 E0.01290 ; perimeter
G1 X106.749 Y108.092 E0.04021 ; perimeter
G1 X107.215 Y108.307 E0.02381 ; perimeter
G1 X107.593 Y108.513 E0.01993 ; perimeter
G1 X107.684 Y108.586 E0.00541 ; perimeter
G1 X108.185 Y108.822 E0.02564 ; perimeter
G1 X108.347 Y108.845 E0.00759 ; perimeter
G1 X108.801 Y109.100 E0.02414 ; perimeter
G1 X108.861 Y109.251 E0.00754 ; perimeter
G1 X108.825 Y109.431 E0.00851 ; perimeter
G1 X108.714 Y109.502 E0.00610 ; perimeter
G1 X108.282 Y109.670 E0.02146 ; perimeter
G1 X108.074 Y109.706 E0.00977 ; perimeter
G1 X107.897 Y109.661 E0.00847 ; perimeter
G1 X107.476 Y109.420 E0.02244 ; perimeter
G1 X107.338 Y109.295 E0.00865 ; perimeter
G1 X107.064 Y109.103 E0.01547 ; perimeter
G1 X106.614 Y108.848 E0.02398 ; perimeter
G1 X106.284 Y108.601 E0.01910 ; perimeter
G1 X105.962 Y108.331 E0.01946 ; perimeter
G1 X105.758 Y108.104 E0.01414 ; perimeter
G1 X105.643 Y107.914 E0.01031 ; perimeter
G1 X105.900 Y107.942 F10800.000 ; move inwards before travel
G1 X106.231 Y108.225 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.23185
G1 F2400.000
G1 X106.429 Y108.323 E0.00346 ; infill
;WIDTH:0.260734
G1 X106.626 Y108.421 E0.00399 ; infill
;WIDTH:0.307164
G1 X106.818 Y108.535 E0.00491 ; infill
;WIDTH:0.333086
G1 X107.277 Y108.780 E0.01255 ; infill
;WIDTH:0.340524
G1 X107.492 Y108.927 E0.00643 ; infill
;WIDTH:0.362499
G1 X107.596 Y108.988 E0.00321 ; infill
;WIDTH:0.408773
G1 X107.727 Y109.075 E0.00479 ; infill
;WIDTH:0.43509
G1 X108.092 Y109.256 E0.01330 ; infill
G1 X108.543 Y109.232 E0.01473 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.092 Y109.256 E-0.11920 ; wipe and retract
G1 X107.727 Y109.075 E-0.10762 ; wipe and retract
;WIPE_END
G1 E-2.17318 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X114.513 Y114.560 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.877 Y114.766 E0.01415 ; perimeter
G1 X114.928 Y114.821 E0.00253 ; perimeter
G1 X114.793 Y114.801 E0.00462 ; perimeter
G1 X114.648 Y114.727 E0.00552 ; perimeter
G1 X114.539 Y114.615 E0.00530 ; perimeter
G1 X113.911 Y114.032 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.536 Y113.712 E0.02285 ; perimeter
G1 X113.197 Y113.562 E0.01713 ; perimeter
G1 X113.002 Y113.411 E0.01146 ; perimeter
G1 X112.880 Y113.199 E0.01130 ; perimeter
G1 X112.859 Y113.057 E0.00666 ; perimeter
G1 X112.888 Y112.966 E0.00442 ; perimeter
G1 X112.979 Y112.844 E0.00704 ; perimeter
G1 X113.083 Y112.780 E0.00562 ; perimeter
G1 X113.249 Y112.741 E0.00793 ; perimeter
G1 X113.572 Y112.808 E0.01528 ; perimeter
G1 X113.764 Y112.935 E0.01063 ; perimeter
G1 X113.942 Y113.196 E0.01465 ; perimeter
G1 X114.006 Y113.428 E0.01116 ; perimeter
G1 X114.316 Y113.815 E0.02298 ; perimeter
G1 X114.836 Y114.200 E0.02995 ; perimeter
G1 X115.172 Y114.377 E0.01759 ; perimeter
G1 X115.231 Y114.440 E0.00400 ; perimeter
G1 X115.534 Y114.576 E0.01535 ; perimeter
G1 X115.650 Y114.653 E0.00647 ; perimeter
G1 X115.741 Y114.808 E0.00832 ; perimeter
G1 X115.770 Y114.955 E0.00695 ; perimeter
G1 X115.737 Y115.099 E0.00682 ; perimeter
G1 X115.618 Y115.260 E0.00931 ; perimeter
G1 X115.446 Y115.360 E0.00920 ; perimeter
G1 X115.300 Y115.362 E0.00675 ; perimeter
G1 X114.676 Y115.271 E0.02922 ; perimeter
G1 X114.372 Y115.127 E0.01559 ; perimeter
G1 X114.146 Y114.912 E0.01443 ; perimeter
G1 X114.013 Y114.631 E0.01439 ; perimeter
G1 X113.982 Y114.389 E0.01131 ; perimeter
G1 X113.928 Y114.230 E0.00777 ; perimeter
G1 X113.916 Y114.092 E0.00645 ; perimeter
G1 X114.069 Y113.664 F10800.000 ; move inwards before travel
G1 X115.355 Y114.943 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.378855
G1 F2400.000
G1 X115.334 Y114.944 E0.00059 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.355 Y114.943 E-0.00556 ; wipe and retract
;WIPE_END
G1 E-2.39444 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 X115.497 Y112.232 ; move to first perimeter point
G1 Z26.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.427 Y112.228 E0.00328 ; perimeter
G1 X115.340 Y112.192 E0.00436 ; perimeter
G1 X115.241 Y112.091 E0.00654 ; perimeter
G1 X115.185 Y111.956 E0.00676 ; perimeter
G1 X115.156 Y111.800 E0.00735 ; perimeter
G1 X115.172 Y111.632 E0.00784 ; perimeter
G1 X115.262 Y111.420 E0.01062 ; perimeter
G1 X115.435 Y111.307 E0.00961 ; perimeter
G1 X115.571 Y111.296 E0.00633 ; perimeter
G1 X115.712 Y111.344 E0.00686 ; perimeter
G1 X115.761 Y111.381 E0.00286 ; perimeter
G1 X115.813 Y111.459 E0.00433 ; perimeter
G1 X115.882 Y111.738 E0.01332 ; perimeter
G1 X115.845 Y111.991 E0.01186 ; perimeter
G1 X115.764 Y112.152 E0.00835 ; perimeter
G1 X115.685 Y112.210 E0.00452 ; perimeter
G1 X115.557 Y112.236 E0.00605 ; perimeter
G1 X115.458 Y112.173 F10800.000 ; move inwards before travel
;LAYER_CHANGE
;Z:26.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;26.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.427 Y112.228 E-0.03450 ; wipe and retract
G1 X115.340 Y112.192 E-0.02485 ; wipe and retract
G1 X115.241 Y112.091 E-0.03724 ; wipe and retract
G1 X115.185 Y111.956 E-0.03851 ; wipe and retract
G1 X115.156 Y111.800 E-0.04188 ; wipe and retract
G1 X115.172 Y111.632 E-0.04466 ; wipe and retract
G1 X115.262 Y111.420 E-0.06050 ; wipe and retract
G1 X115.435 Y111.307 E-0.05474 ; wipe and retract
G1 X115.571 Y111.296 E-0.03604 ; wipe and retract
G1 X115.712 Y111.344 E-0.03908 ; wipe and retract
G1 X115.761 Y111.381 E-0.01629 ; wipe and retract
G1 X115.813 Y111.459 E-0.02469 ; wipe and retract
G1 X115.882 Y111.738 E-0.07587 ; wipe and retract
G1 X115.845 Y111.991 E-0.06757 ; wipe and retract
G1 X115.764 Y112.152 E-0.04757 ; wipe and retract
G1 X115.685 Y112.210 E-0.02574 ; wipe and retract
G1 X115.557 Y112.236 E-0.03446 ; wipe and retract
;WIPE_END
G1 E-1.69582 F2400.000 ; retract
G1 Z26.275 F10800.000 ; lift Z
G1 Z26.400 ; move to next layer (131)
;AFTER_LAYER_CHANGE
;26.4
G1 Z26.475 ; lift Z
G1 X114.124 Y102.109 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X113.842 Y102.015 E0.01375 ; perimeter
G1 X113.525 Y102.025 E0.01471 ; perimeter
G1 X113.102 Y101.918 E0.02021 ; perimeter
G1 X112.534 Y101.639 E0.02933 ; perimeter
G1 X112.205 Y101.381 E0.01936 ; perimeter
G1 X111.995 Y101.077 E0.01711 ; perimeter
G1 X111.996 Y100.948 E0.00597 ; perimeter
G1 X112.030 Y100.913 E0.00223 ; perimeter
G1 X112.227 Y100.861 E0.00944 ; perimeter
G1 X112.421 Y100.862 E0.00899 ; perimeter
G1 X112.849 Y100.959 E0.02035 ; perimeter
G1 X113.383 Y101.201 E0.02713 ; perimeter
G1 X113.731 Y101.451 E0.01988 ; perimeter
G1 X113.958 Y101.706 E0.01583 ; perimeter
G1 X113.998 Y101.767 E0.00336 ; perimeter
G1 X114.103 Y102.052 E0.01408 ; perimeter
G1 X113.880 Y101.939 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.842 Y102.015 E-0.06958 ; wipe and retract
G1 X113.525 Y102.025 E-0.08381 ; wipe and retract
G1 X113.102 Y101.918 E-0.11515 ; wipe and retract
G1 X112.534 Y101.639 E-0.16709 ; wipe and retract
G1 X112.205 Y101.381 E-0.11031 ; wipe and retract
G1 X111.995 Y101.077 E-0.09749 ; wipe and retract
G1 X111.996 Y100.948 E-0.03399 ; wipe and retract
G1 X112.030 Y100.913 E-0.01272 ; wipe and retract
G1 X112.227 Y100.861 E-0.05379 ; wipe and retract
G1 X112.421 Y100.862 E-0.05119 ; wipe and retract
G1 X112.849 Y100.959 E-0.11592 ; wipe and retract
G1 X113.383 Y101.201 E-0.15457 ; wipe and retract
G1 X113.731 Y101.451 E-0.11324 ; wipe and retract
G1 X113.958 Y101.706 E-0.09021 ; wipe and retract
G1 X113.998 Y101.767 E-0.01916 ; wipe and retract
G1 X114.103 Y102.052 E-0.08022 ; wipe and retract
;WIPE_END
G1 E-1.03156 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X115.237 Y104.969 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.252 Y105.027 E0.00201 ; perimeter
G1 X115.097 Y105.151 E0.00671 ; perimeter
G1 X115.201 Y105.017 E0.00573 ; perimeter
G1 X114.806 Y104.739 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.744 Y104.131 E0.02829 ; perimeter
G1 X114.640 Y103.658 E0.02246 ; perimeter
G1 X114.641 Y103.522 E0.00631 ; perimeter
G1 X114.543 Y103.041 E0.02274 ; perimeter
G1 X114.571 Y102.811 E0.01071 ; perimeter
G1 X114.832 Y103.140 E0.01944 ; perimeter
G1 X115.092 Y103.600 E0.02447 ; perimeter
G1 X115.164 Y103.665 E0.00451 ; perimeter
G1 X115.306 Y103.907 E0.01297 ; perimeter
G1 X115.469 Y104.236 E0.01702 ; perimeter
G1 X115.528 Y104.424 E0.00910 ; perimeter
G1 X115.705 Y104.836 E0.02079 ; perimeter
G1 X115.734 Y104.959 E0.00586 ; perimeter
G1 X115.735 Y105.138 E0.00827 ; perimeter
G1 X115.633 Y105.332 E0.01017 ; perimeter
G1 X115.404 Y105.539 E0.01431 ; perimeter
G1 X115.198 Y105.637 E0.01055 ; perimeter
G1 X114.895 Y105.741 E0.01486 ; perimeter
G1 X114.588 Y105.785 E0.01436 ; perimeter
G1 X114.354 Y105.774 E0.01083 ; perimeter
G1 X114.294 Y105.747 E0.00309 ; perimeter
G1 X114.276 Y105.709 E0.00196 ; perimeter
G1 X114.281 Y105.578 E0.00604 ; perimeter
G1 X114.390 Y105.343 E0.01202 ; perimeter
G1 X114.491 Y105.195 E0.00829 ; perimeter
G1 X114.550 Y105.149 E0.00347 ; perimeter
G1 X114.672 Y104.914 E0.01225 ; perimeter
G1 X114.770 Y104.787 E0.00745 ; perimeter
G1 X115.174 Y104.581 F10800.000 ; move inwards before travel
G1 X115.188 Y104.639 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.304917
G1 F2400.000
G1 X115.132 Y104.372 E0.00593 ; infill
;WIDTH:0.284464
G1 X115.105 Y104.277 E0.00199 ; infill
;WIDTH:0.249324
G1 X115.077 Y104.182 E0.00170 ; infill
;WIDTH:0.214184
G1 X115.050 Y104.086 E0.00141 ; infill
;WIDTH:0.179043
G1 X115.038 Y104.052 E0.00042 ; infill
;WIDTH:0.169692
G1 X114.996 Y103.944 E0.00122 ; infill
;WIDTH:0.133373
G1 X114.953 Y103.836 E0.00087 ; infill
;WIDTH:0.0970545
G1 X114.940 Y103.812 E0.00012 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.953 Y103.836 E-0.00718 ; wipe and retract
;WIPE_END
G1 E-2.39282 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X113.660 Y101.780 ; move to first infill point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.203312
G1 F2400.000
G1 X113.327 Y101.604 E0.00503 ; infill
;WIDTH:0.319111
G1 X112.723 Y101.314 E0.01539 ; infill
;WIDTH:0.310232
G1 X112.336 Y101.146 E0.00939 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.723 Y101.314 E-0.11145 ; wipe and retract
;WIPE_END
G1 E-2.28855 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X101.144 Y99.506 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.000 Y99.552 E0.00510 ; perimeter
G1 X100.984 Y99.382 E0.00580 ; perimeter
G1 X100.996 Y99.262 E0.00408 ; perimeter
G1 X101.113 Y99.455 E0.00764 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.000 Y99.552 E-0.03925 ; wipe and retract
G1 X100.984 Y99.382 E-0.04520 ; wipe and retract
G1 X100.996 Y99.262 E-0.03179 ; wipe and retract
G1 X101.113 Y99.455 E-0.05958 ; wipe and retract
;WIPE_END
G1 E-2.22418 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X102.790 Y96.454 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.206 Y95.953 E0.02203 ; perimeter
G1 X103.357 Y95.805 E0.00717 ; perimeter
G1 X103.595 Y95.616 E0.01030 ; perimeter
G1 X103.845 Y95.562 E0.00863 ; perimeter
G1 X104.581 Y95.534 E0.02494 ; perimeter
G1 X105.178 Y95.547 E0.02019 ; perimeter
G1 X105.306 Y95.573 E0.00442 ; perimeter
G1 X105.435 Y95.706 E0.00628 ; perimeter
G1 X105.915 Y96.063 E0.02026 ; perimeter
G1 X106.678 Y96.219 E0.02634 ; perimeter
G1 X106.977 Y96.204 E0.01013 ; perimeter
G1 X106.926 Y96.317 E0.00420 ; perimeter
G1 X107.045 Y96.679 E0.01290 ; perimeter
G1 X106.216 Y96.468 E0.02895 ; perimeter
G1 X105.468 Y96.213 E0.02676 ; perimeter
G1 X104.496 Y96.279 E0.03299 ; perimeter
G1 X103.948 Y96.342 E0.01866 ; perimeter
G1 X103.793 Y96.380 E0.00541 ; perimeter
G1 X103.180 Y96.359 E0.02077 ; perimeter
G1 X102.970 Y96.447 E0.00768 ; perimeter
G1 X102.850 Y96.452 E0.00409 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.206 Y95.953 E-0.16162 ; wipe and retract
G1 X103.357 Y95.805 E-0.05590 ; wipe and retract
G1 X103.595 Y95.616 E-0.08034 ; wipe and retract
G1 X103.845 Y95.562 E-0.06728 ; wipe and retract
G1 X104.581 Y95.534 E-0.19447 ; wipe and retract
G1 X105.178 Y95.547 E-0.15744 ; wipe and retract
G1 X105.306 Y95.573 E-0.03446 ; wipe and retract
G1 X105.435 Y95.706 E-0.04897 ; wipe and retract
G1 X105.915 Y96.063 E-0.15792 ; wipe and retract
G1 X106.678 Y96.219 E-0.20539 ; wipe and retract
G1 X106.977 Y96.204 E-0.07897 ; wipe and retract
G1 X106.926 Y96.317 E-0.03274 ; wipe and retract
G1 X107.045 Y96.679 E-0.10056 ; wipe and retract
G1 X106.216 Y96.468 E-0.22566 ; wipe and retract
G1 X105.468 Y96.213 E-0.20864 ; wipe and retract
G1 X104.496 Y96.279 E-0.25721 ; wipe and retract
G1 X103.948 Y96.342 E-0.14544 ; wipe and retract
G1 X103.793 Y96.380 E-0.04218 ; wipe and retract
G1 X103.699 Y96.377 E-0.02482 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X108.973 Y97.770 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.139 Y97.754 E0.00562 ; perimeter
G1 X109.131 Y97.878 E0.00422 ; perimeter
G1 X109.023 Y97.804 E0.00443 ; perimeter
G1 X109.607 Y98.029 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.595 Y98.310 E0.01304 ; perimeter
G1 X109.562 Y98.332 E0.00184 ; perimeter
G1 X109.521 Y98.591 E0.01212 ; perimeter
G1 X109.472 Y98.610 E0.00247 ; perimeter
G1 X109.220 Y98.522 E0.01236 ; perimeter
G1 X108.129 Y97.777 E0.06120 ; perimeter
G1 X107.645 Y97.509 E0.02561 ; perimeter
G1 X107.522 Y97.414 E0.00722 ; perimeter
G1 X107.005 Y97.172 E0.02643 ; perimeter
G1 X106.761 Y97.094 E0.01187 ; perimeter
G1 X106.082 Y96.931 E0.03232 ; perimeter
G1 X105.404 Y96.700 E0.03318 ; perimeter
G1 X104.752 Y96.745 E0.03026 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.949 Y96.838 E0.03379 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.843 Y96.864 E0.00508 ; perimeter
G1 X103.269 Y96.844 E0.02659 ; perimeter
G1 X103.077 Y96.925 E0.00965 ; perimeter
G1 X102.761 Y96.937 E0.01464 ; perimeter
G1 X102.527 Y97.010 E0.01134 ; perimeter
G1 X102.240 Y97.174 E0.01534 ; perimeter
G1 X101.982 Y97.271 E0.01276 ; perimeter
G1 X101.663 Y97.522 E0.01882 ; perimeter
G1 X101.399 Y97.815 E0.01824 ; perimeter
G1 X101.369 Y98.280 E0.02162 ; perimeter
G1 X101.319 Y98.457 E0.00853 ; perimeter
G1 X101.368 Y98.946 E0.02275 ; perimeter
G1 X101.766 Y99.576 E0.03452 ; perimeter
G1 X101.761 Y99.778 E0.00933 ; perimeter
G1 X101.622 Y99.913 E0.00900 ; perimeter
G1 X101.462 Y100.008 E0.00860 ; perimeter
G1 X101.240 Y99.982 E0.01036 ; perimeter
G1 X101.023 Y100.051 E0.01054 ; perimeter
G1 X100.841 Y100.038 E0.00845 ; perimeter
G1 X100.738 Y100.004 E0.00503 ; perimeter
G1 X100.597 Y99.865 E0.00915 ; perimeter
G1 X100.529 Y99.690 E0.00874 ; perimeter
G1 X100.500 Y99.381 E0.01436 ; perimeter
G1 X100.531 Y99.060 E0.01493 ; perimeter
G1 X100.785 Y97.993 E0.05083 ; perimeter
G1 X100.837 Y97.640 E0.01652 ; perimeter
G1 X101.014 Y97.193 E0.02224 ; perimeter
G1 X101.330 Y96.821 E0.02263 ; perimeter
G1 X101.654 Y96.571 E0.01895 ; perimeter
G1 X102.211 Y96.284 E0.02903 ; perimeter
G1 X102.480 Y96.083 E0.01555 ; perimeter
G1 X102.848 Y95.628 E0.02711 ; perimeter
G1 X103.038 Y95.443 E0.01227 ; perimeter
G1 X103.384 Y95.168 E0.02048 ; perimeter
G1 X103.784 Y95.082 E0.01897 ; perimeter
G1 X104.577 Y95.052 E0.03676 ; perimeter
G1 X105.231 Y95.066 E0.03029 ; perimeter
G1 X105.457 Y95.112 E0.01068 ; perimeter
G1 X105.593 Y95.177 E0.00699 ; perimeter
G1 X105.754 Y95.342 E0.01066 ; perimeter
G1 X106.117 Y95.612 E0.02099 ; perimeter
G1 X106.713 Y95.734 E0.02820 ; perimeter
G1 X106.994 Y95.719 E0.01303 ; perimeter
G1 X107.250 Y95.757 E0.01198 ; perimeter
G1 X107.348 Y95.803 E0.00499 ; perimeter
G1 X107.488 Y95.960 E0.00977 ; perimeter
G1 X107.541 Y96.105 E0.00717 ; perimeter
G1 X107.442 Y96.343 E0.01192 ; perimeter
G1 X107.518 Y96.574 E0.01125 ; perimeter
G1 X107.578 Y96.915 E0.01605 ; perimeter
G1 X107.912 Y97.131 E0.01839 ; perimeter
G1 X108.481 Y97.335 E0.02804 ; perimeter
G1 X109.230 Y97.260 E0.03487 ; perimeter
G1 X109.643 Y97.289 E0.01918 ; perimeter
G1 X109.711 Y97.310 E0.00329 ; perimeter
G1 X109.850 Y97.396 E0.00757 ; perimeter
G1 X109.962 Y97.519 E0.00769 ; perimeter
G1 X109.965 Y97.616 E0.00451 ; perimeter
G1 X109.929 Y97.701 E0.00425 ; perimeter
G1 X109.811 Y97.799 E0.00714 ; perimeter
G1 X109.772 Y97.926 E0.00616 ; perimeter
G1 X109.658 Y97.998 E0.00622 ; perimeter
G1 X109.335 Y98.100 F10800.000 ; move inwards before travel
G1 X108.356 Y97.569 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.10968
G1 F2400.000
G1 X108.272 Y97.547 E0.00048 ; infill
;WIDTH:0.101417
G1 X108.223 Y97.525 E0.00026 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.272 Y97.547 E-0.01424 ; wipe and retract
;WIPE_END
G1 E-2.38576 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X104.676 Y95.740 ; move to first infill point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.237677
G1 F2400.000
G1 X105.471 Y96.009 E0.01360 ; infill
G1 X105.192 Y95.758 F10800.000 ; move to first infill point
;WIDTH:0.324405
G1 F2400.000
G1 X105.134 Y95.890 E0.00339 ; infill
G1 X104.458 Y95.910 E0.01584 ; infill
;WIDTH:0.421042
G1 X103.894 Y95.953 E0.01778 ; infill
G1 X103.768 Y95.981 E0.00405 ; infill
G1 X103.397 Y96.163 E0.01298 ; infill
G1 X102.506 Y96.374 F10800.000 ; move to first infill point
;WIDTH:0.360411
G1 F2400.000
G1 X102.425 Y96.623 E0.00690 ; infill
G1 X102.385 Y96.640 E0.00116 ; infill
;WIDTH:0.351977
G1 X101.863 Y96.900 E0.01498 ; infill
;WIDTH:0.337806
G1 X101.814 Y96.928 E0.00139 ; infill
;WIDTH:0.320918
G1 X101.521 Y97.161 E0.00865 ; infill
;WIDTH:0.304453
G1 X101.425 Y97.254 E0.00290 ; infill
;WIDTH:0.275399
G1 X101.322 Y97.374 E0.00306 ; infill
;WIDTH:0.266037
G1 X101.258 Y97.477 E0.00226 ; infill
;WIDTH:0.222785
G1 X101.193 Y97.581 E0.00182 ; infill
;WIDTH:0.179533
G1 X101.129 Y97.684 E0.00138 ; infill
;WIDTH:0.136282
G1 X101.055 Y98.226 E0.00425 ; infill
G1 X101.001 Y98.443 E0.00173 ; infill
;WIDTH:0.237709
G1 X100.976 Y98.829 E0.00627 ; infill
;WIDTH:0.332588
G1 X100.963 Y99.022 E0.00466 ; infill
G1 X101.331 Y99.750 F10800.000 ; move to first infill point
;WIDTH:0.10757
G1 F2400.000
G1 X101.498 Y99.668 E0.00100 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.331 Y99.750 E-0.04901 ; wipe and retract
;WIPE_END
G1 E-2.35099 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X102.283 Y103.608 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.318 Y103.744 E0.00478 ; perimeter
G1 X102.316 Y103.870 E0.00424 ; perimeter
G1 X102.232 Y103.759 E0.00471 ; perimeter
G1 X102.258 Y103.662 E0.00338 ; perimeter
G1 X101.723 Y103.662 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X101.760 Y103.543 E0.00578 ; perimeter
G1 X101.798 Y103.510 E0.00233 ; perimeter
G1 X101.902 Y103.277 E0.01186 ; perimeter
G1 X102.137 Y102.928 E0.01944 ; perimeter
G1 X102.251 Y102.830 E0.00698 ; perimeter
G1 X102.396 Y102.743 E0.00784 ; perimeter
G1 X102.531 Y102.709 E0.00646 ; perimeter
G1 X102.629 Y102.748 E0.00489 ; perimeter
G1 X102.703 Y102.885 E0.00721 ; perimeter
G1 X102.763 Y103.196 E0.01470 ; perimeter
G1 X102.723 Y103.383 E0.00885 ; perimeter
G1 X102.800 Y103.686 E0.01448 ; perimeter
G1 X102.799 Y103.823 E0.00633 ; perimeter
G1 X102.908 Y103.998 E0.00954 ; perimeter
G1 X103.010 Y104.104 E0.00683 ; perimeter
G1 X103.168 Y104.326 E0.01261 ; perimeter
G1 X103.436 Y104.590 E0.01743 ; perimeter
G1 X103.719 Y104.954 E0.02136 ; perimeter
G1 X103.842 Y105.037 E0.00689 ; perimeter
G1 X104.428 Y105.639 E0.03890 ; perimeter
G1 X104.559 Y105.920 E0.01438 ; perimeter
G1 X104.609 Y106.274 E0.01657 ; perimeter
G1 X104.580 Y106.400 E0.00599 ; perimeter
G1 X104.509 Y106.550 E0.00768 ; perimeter
G1 X104.443 Y106.600 E0.00385 ; perimeter
G1 X104.382 Y106.698 E0.00537 ; perimeter
G1 X104.233 Y106.727 E0.00701 ; perimeter
G1 X104.168 Y106.713 E0.00309 ; perimeter
G1 X104.074 Y106.673 E0.00471 ; perimeter
G1 X103.885 Y106.520 E0.01130 ; perimeter
G1 X103.504 Y105.761 E0.03930 ; perimeter
G1 X101.884 Y104.113 E0.10707 ; perimeter
G1 X101.782 Y103.948 E0.00898 ; perimeter
G1 X101.727 Y103.721 E0.01081 ; perimeter
G1 X101.836 Y103.610 F10800.000 ; move inwards before travel
G1 X102.564 Y103.961 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.231327
G1 F2400.000
G1 X102.819 Y104.717 E0.01250 ; infill
G1 X102.580 Y103.957 F10800.000 ; move to first infill point
;WIDTH:0.278223
G1 F2400.000
G1 X102.713 Y104.379 E0.00867 ; infill
G1 X103.487 Y105.230 E0.02251 ; infill
;WIDTH:0.314312
G1 X103.825 Y105.559 E0.01064 ; infill
;WIDTH:0.351572
G1 X104.061 Y105.892 E0.01049 ; infill
G1 X104.135 Y106.046 E0.00438 ; infill
G1 X104.247 Y106.458 E0.01095 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.135 Y106.046 E-0.11261 ; wipe and retract
G1 X104.061 Y105.892 E-0.04507 ; wipe and retract
G1 X103.825 Y105.559 E-0.10781 ; wipe and retract
;WIPE_END
G1 E-2.13451 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X106.257 Y108.314 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.224 Y108.202 E0.00541 ; perimeter
G1 X106.314 Y108.190 E0.00420 ; perimeter
G1 X106.718 Y108.228 E0.01878 ; perimeter
G1 X107.182 Y108.364 E0.02242 ; perimeter
G1 X107.547 Y108.524 E0.01845 ; perimeter
G1 X107.816 Y108.679 E0.01438 ; perimeter
G1 X107.947 Y108.681 E0.00606 ; perimeter
G1 X108.231 Y108.818 E0.01459 ; perimeter
G1 X108.506 Y108.833 E0.01277 ; perimeter
G1 X108.794 Y108.923 E0.01395 ; perimeter
G1 X109.189 Y109.103 E0.02012 ; perimeter
G1 X109.232 Y109.144 E0.00276 ; perimeter
G1 X109.281 Y109.252 E0.00551 ; perimeter
G1 X109.091 Y109.445 E0.01253 ; perimeter
G1 X108.915 Y109.530 E0.00909 ; perimeter
G1 X108.722 Y109.561 E0.00903 ; perimeter
G1 X108.481 Y109.647 E0.01188 ; perimeter
G1 X108.190 Y109.681 E0.01354 ; perimeter
G1 X107.969 Y109.639 E0.01046 ; perimeter
G1 X107.422 Y109.330 E0.02909 ; perimeter
G1 X106.858 Y108.939 E0.03178 ; perimeter
G1 X106.453 Y108.568 E0.02543 ; perimeter
G1 X106.297 Y108.358 E0.01212 ; perimeter
G1 X106.323 Y108.218 F10800.000 ; move inwards before travel
G1 X106.814 Y108.507 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.227781
G1 F2400.000
G1 X107.066 Y108.678 E0.00468 ; infill
;WIDTH:0.255938
G1 X107.220 Y108.767 E0.00314 ; infill
;WIDTH:0.284097
G1 X107.373 Y108.856 E0.00355 ; infill
;WIDTH:0.293807
G1 X107.402 Y108.870 E0.00069 ; infill
;WIDTH:0.30099
G1 X107.418 Y108.877 E0.00036 ; infill
;WIDTH:0.323779
G1 X107.680 Y109.040 E0.00721 ; infill
;WIDTH:0.344498
G1 X108.488 Y109.388 E0.02207 ; infill
G1 X108.784 Y109.184 F10800.000 ; move to first infill point
;WIDTH:0.381009
G1 F2400.000
G1 X108.405 Y109.238 E0.01075 ; infill
G1 X108.193 Y109.245 E0.00599 ; infill
G1 X108.107 Y109.231 E0.00244 ; infill
G1 X107.848 Y109.098 E0.00818 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.107 Y109.231 E-0.07676 ; wipe and retract
G1 X108.193 Y109.245 E-0.02293 ; wipe and retract
G1 X108.405 Y109.238 E-0.05618 ; wipe and retract
G1 X108.784 Y109.184 E-0.10095 ; wipe and retract
;WIPE_END
G1 E-2.14317 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X114.446 Y114.316 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.737 Y114.500 E0.01167 ; perimeter
G1 X115.040 Y114.642 E0.01131 ; perimeter
G1 X115.239 Y114.859 E0.00997 ; perimeter
G1 X114.954 Y114.820 E0.00972 ; perimeter
G1 X114.734 Y114.712 E0.00830 ; perimeter
G1 X114.528 Y114.500 E0.01001 ; perimeter
G1 X114.470 Y114.371 E0.00479 ; perimeter
G1 X113.773 Y113.994 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.639 Y113.851 E0.00909 ; perimeter
G1 X113.121 Y113.466 E0.02991 ; perimeter
G1 X113.003 Y113.273 E0.01046 ; perimeter
G1 X112.977 Y113.097 E0.00825 ; perimeter
G1 X113.000 Y113.028 E0.00337 ; perimeter
G1 X113.090 Y112.892 E0.00756 ; perimeter
G1 X113.174 Y112.836 E0.00467 ; perimeter
G1 X113.368 Y112.791 E0.00919 ; perimeter
G1 X113.705 Y112.830 E0.01575 ; perimeter
G1 X113.888 Y112.977 E0.01086 ; perimeter
G1 X114.404 Y113.680 E0.04037 ; perimeter
G1 X114.598 Y113.842 E0.01172 ; perimeter
G1 X114.969 Y114.076 E0.02034 ; perimeter
G1 X115.323 Y114.243 E0.01811 ; perimeter
G1 X115.537 Y114.460 E0.01411 ; perimeter
G1 X115.741 Y114.724 E0.01547 ; perimeter
G1 X115.773 Y114.924 E0.00939 ; perimeter
G1 X115.733 Y115.106 E0.00866 ; perimeter
G1 X115.666 Y115.203 E0.00542 ; perimeter
G1 X115.570 Y115.282 E0.00576 ; perimeter
G1 X115.440 Y115.352 E0.00685 ; perimeter
G1 X115.298 Y115.354 E0.00658 ; perimeter
G1 X114.839 Y115.290 E0.02146 ; perimeter
G1 X114.682 Y115.234 E0.00774 ; perimeter
G1 X114.445 Y115.103 E0.01250 ; perimeter
G1 X114.218 Y114.884 E0.01464 ; perimeter
G1 X114.113 Y114.753 E0.00781 ; perimeter
G1 X113.798 Y114.048 E0.03572 ; perimeter
G1 X113.848 Y113.812 F10800.000 ; move inwards before travel
G1 X114.132 Y113.916 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.278556
G1 F2400.000
G1 X114.073 Y113.815 E0.00228 ; infill
;WIDTH:0.253874
G1 X113.775 Y113.472 E0.00797 ; infill
;WIDTH:0.371676
G1 X113.578 Y113.274 E0.00763 ; infill
G1 X113.294 Y113.055 E0.00979 ; infill
G1 X113.250 Y113.087 F10800.000 ; move to first infill point
;WIDTH:0.352241
G1 F2400.000
G1 X114.036 Y113.587 E0.02397 ; infill
G1 X114.132 Y113.916 F10800.000 ; move to first infill point
;WIDTH:0.288278
G1 F2400.000
G1 X114.281 Y114.140 E0.00550 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.132 Y113.916 E-0.07114 ; wipe and retract
;WIPE_END
G1 E-2.32886 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 X115.363 Y112.312 ; move to first perimeter point
G1 Z26.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.223 Y112.179 E0.00896 ; perimeter
G1 X115.153 Y111.872 E0.01459 ; perimeter
G1 X115.164 Y111.769 E0.00480 ; perimeter
G1 X115.177 Y111.705 E0.00305 ; perimeter
G1 X115.291 Y111.480 E0.01169 ; perimeter
G1 X115.436 Y111.393 E0.00781 ; perimeter
G1 X115.524 Y111.383 E0.00408 ; perimeter
G1 X115.690 Y111.430 E0.00800 ; perimeter
G1 X115.821 Y111.565 E0.00873 ; perimeter
G1 X115.881 Y111.799 E0.01115 ; perimeter
G1 X115.871 Y112.008 E0.00973 ; perimeter
G1 X115.830 Y112.144 E0.00656 ; perimeter
G1 X115.764 Y112.261 E0.00622 ; perimeter
G1 X115.678 Y112.324 E0.00495 ; perimeter
G1 X115.564 Y112.369 E0.00567 ; perimeter
G1 X115.450 Y112.364 E0.00531 ; perimeter
G1 X115.415 Y112.343 E0.00188 ; perimeter
G1 X115.377 Y112.119 F10800.000 ; move inwards before travel
G1 X115.531 Y112.123 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.178531
G1 F2400.000
G1 X115.528 Y112.051 E0.00081 ; infill
;WIDTH:0.196159
G1 X115.525 Y112.039 E0.00016 ; infill
;WIDTH:0.222564
G1 X115.577 Y111.649 E0.00588 ; infill
G1 X115.517 Y111.631 F10800.000 ; move to first infill point
;WIDTH:0.278465
G1 F2400.000
G1 X115.541 Y112.119 E0.00956 ; infill
;LAYER_CHANGE
;Z:26.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;26.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.517 Y111.631 E-0.12880 ; wipe and retract
;WIPE_END
G1 E-2.27120 F2400.000 ; retract
G1 Z26.475 F10800.000 ; lift Z
G1 Z26.600 ; move to next layer (132)
;AFTER_LAYER_CHANGE
;26.6
G1 Z26.675 ; lift Z
G1 X113.673 Y101.837 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.485 Y101.878 E0.00892 ; perimeter
G1 X113.300 Y101.875 E0.00856 ; perimeter
G1 X112.789 Y101.758 E0.02429 ; perimeter
G1 X112.397 Y101.589 E0.01976 ; perimeter
G1 X112.152 Y101.444 E0.01317 ; perimeter
G1 X111.907 Y101.254 E0.01438 ; perimeter
G1 X111.680 Y100.949 E0.01760 ; perimeter
G1 X111.656 Y100.846 E0.00487 ; perimeter
G1 X111.682 Y100.757 E0.00433 ; perimeter
G1 X111.724 Y100.736 E0.00219 ; perimeter
G1 X111.984 Y100.703 E0.01213 ; perimeter
G1 X112.453 Y100.779 E0.02201 ; perimeter
G1 X113.004 Y101.010 E0.02767 ; perimeter
G1 X113.428 Y101.306 E0.02394 ; perimeter
G1 X113.635 Y101.542 E0.01457 ; perimeter
G1 X113.715 Y101.768 E0.01109 ; perimeter
G1 X113.704 Y101.786 E0.00097 ; perimeter
G1 X113.491 Y101.773 F10800.000 ; move inwards before travel
G1 X113.369 Y101.605 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.224928
G1 F2400.000
G1 X112.906 Y101.400 E0.00766 ; infill
;WIDTH:0.334646
G1 X112.360 Y101.139 E0.01469 ; infill
;WIDTH:0.297054
G1 X112.047 Y100.957 E0.00764 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.360 Y101.139 E-0.09539 ; wipe and retract
;WIPE_END
G1 E-2.30461 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X114.909 Y104.739 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.896 Y104.188 E0.02557 ; perimeter
G1 X114.924 Y103.769 E0.01942 ; perimeter
G1 X115.293 Y104.202 E0.02636 ; perimeter
G1 X115.499 Y104.577 E0.01980 ; perimeter
G1 X115.636 Y104.890 E0.01582 ; perimeter
G1 X115.612 Y105.168 E0.01290 ; perimeter
G1 X115.490 Y105.383 E0.01146 ; perimeter
G1 X115.266 Y105.578 E0.01375 ; perimeter
G1 X114.972 Y105.746 E0.01570 ; perimeter
G1 X114.623 Y105.888 E0.01744 ; perimeter
G1 X114.259 Y105.961 E0.01722 ; perimeter
G1 X114.078 Y105.952 E0.00838 ; perimeter
G1 X114.009 Y105.921 E0.00350 ; perimeter
G1 X113.985 Y105.865 E0.00284 ; perimeter
G1 X113.997 Y105.750 E0.00537 ; perimeter
G1 X114.129 Y105.496 E0.01325 ; perimeter
G1 X114.269 Y105.316 E0.01055 ; perimeter
G1 X114.510 Y105.126 E0.01421 ; perimeter
G1 X114.639 Y104.934 E0.01072 ; perimeter
G1 X114.860 Y104.775 E0.01265 ; perimeter
G1 X115.294 Y104.632 F10800.000 ; move inwards before travel
G1 X115.235 Y104.810 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.208444
G1 F2400.000
G1 X115.183 Y104.508 E0.00421 ; infill
G1 X115.381 Y104.919 F10800.000 ; move to first infill point
;WIDTH:0.447648
G1 F2400.000
G1 X115.008 Y105.215 E0.01603 ; infill
G1 X114.315 Y105.661 E0.02773 ; infill
G1 X114.320 Y105.650 F10800.000 ; move to first infill point
;WIDTH:0.25194
G1 F2400.000
G1 X114.523 Y105.556 E0.00389 ; infill
;WIDTH:0.293391
G1 X114.651 Y105.481 E0.00309 ; infill
;WIDTH:0.334841
G1 X114.780 Y105.407 E0.00360 ; infill
;WIDTH:0.343549
G1 X114.800 Y105.393 E0.00061 ; infill
;WIDTH:0.352548
G1 X115.371 Y104.900 E0.01944 ; infill
G1 X115.235 Y104.810 F10800.000 ; move to first infill point
;WIDTH:0.230162
G1 F2400.000
G1 X115.247 Y104.859 E0.00078 ; infill
;WIDTH:0.276038
G1 X115.247 Y104.911 E0.00102 ; infill
;WIDTH:0.321913
G1 X115.247 Y104.964 E0.00122 ; infill
;WIDTH:0.336298
G1 X114.983 Y105.462 E0.01375 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.247 Y104.964 E-0.14875 ; wipe and retract
;WIPE_END
G1 E-2.25125 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X115.302 Y112.430 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.204 Y112.301 E0.00751 ; perimeter
G1 X115.150 Y111.964 E0.01580 ; perimeter
G1 X115.201 Y111.717 E0.01169 ; perimeter
G1 X115.230 Y111.654 E0.00321 ; perimeter
G1 X115.336 Y111.600 E0.00553 ; perimeter
G1 X115.372 Y111.520 E0.00406 ; perimeter
G1 X115.493 Y111.476 E0.00600 ; perimeter
G1 X115.646 Y111.510 E0.00723 ; perimeter
G1 X115.836 Y111.704 E0.01259 ; perimeter
G1 X115.878 Y111.858 E0.00741 ; perimeter
G1 X115.875 Y112.066 E0.00964 ; perimeter
G1 X115.836 Y112.231 E0.00782 ; perimeter
G1 X115.766 Y112.370 E0.00720 ; perimeter
G1 X115.549 Y112.506 E0.01191 ; perimeter
G1 X115.436 Y112.502 E0.00522 ; perimeter
G1 X115.355 Y112.458 E0.00426 ; perimeter
G1 X115.333 Y112.271 F10800.000 ; move inwards before travel
G1 X115.486 Y112.255 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.173815
G1 F2400.000
G1 X115.502 Y112.187 E0.00076 ; infill
;WIDTH:0.194409
G1 X115.504 Y112.172 E0.00018 ; infill
;WIDTH:0.209687
G1 X115.509 Y112.158 E0.00021 ; infill
;WIDTH:0.237097
G1 X115.569 Y111.775 E0.00626 ; infill
G1 X115.545 Y111.751 F10800.000 ; move to first infill point
;WIDTH:0.135548
G1 F2400.000
G1 X115.536 Y112.243 E0.00378 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.545 Y111.751 E-0.12968 ; wipe and retract
;WIPE_END
G1 E-2.27032 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X115.047 Y114.326 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.076 Y114.388 E0.00231 ; perimeter
G1 X115.159 Y114.473 E0.00403 ; perimeter
G1 X115.284 Y114.859 E0.01372 ; perimeter
G1 X115.140 Y114.840 E0.00493 ; perimeter
G1 X114.970 Y114.784 E0.00605 ; perimeter
G1 X114.831 Y114.704 E0.00542 ; perimeter
G1 X114.604 Y114.479 E0.01084 ; perimeter
G1 X114.444 Y114.284 E0.00853 ; perimeter
G1 X114.333 Y114.033 E0.00930 ; perimeter
G1 X114.878 Y114.319 E0.02084 ; perimeter
G1 X114.987 Y114.324 E0.00371 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.076 Y114.388 E-0.02896 ; wipe and retract
G1 X115.159 Y114.473 E-0.03142 ; wipe and retract
G1 X115.284 Y114.859 E-0.10693 ; wipe and retract
G1 X115.140 Y114.840 E-0.03847 ; wipe and retract
G1 X114.970 Y114.784 E-0.04718 ; wipe and retract
G1 X114.831 Y114.704 E-0.04227 ; wipe and retract
G1 X114.604 Y114.479 E-0.08450 ; wipe and retract
G1 X114.444 Y114.284 E-0.06650 ; wipe and retract
G1 X114.333 Y114.033 E-0.07247 ; wipe and retract
G1 X114.878 Y114.319 E-0.16243 ; wipe and retract
G1 X114.987 Y114.324 E-0.02890 ; wipe and retract
;WIPE_END
G1 E-1.68997 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X113.206 Y112.932 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.281 Y112.880 E0.00422 ; perimeter
G1 X113.543 Y112.781 E0.01298 ; perimeter
G1 X113.884 Y112.845 E0.01607 ; perimeter
G1 X114.008 Y112.916 E0.00660 ; perimeter
G1 X114.542 Y113.598 E0.04015 ; perimeter
G1 X115.006 Y113.842 E0.02429 ; perimeter
G1 X115.213 Y113.851 E0.00960 ; perimeter
G1 X115.409 Y113.962 E0.01041 ; perimeter
G1 X115.478 Y114.110 E0.00755 ; perimeter
G1 X115.581 Y114.215 E0.00683 ; perimeter
G1 X115.746 Y114.667 E0.02227 ; perimeter
G1 X115.774 Y114.889 E0.01040 ; perimeter
G1 X115.739 Y115.066 E0.00834 ; perimeter
G1 X115.670 Y115.191 E0.00662 ; perimeter
G1 X115.579 Y115.261 E0.00530 ; perimeter
G1 X115.427 Y115.339 E0.00791 ; perimeter
G1 X115.291 Y115.346 E0.00633 ; perimeter
G1 X115.033 Y115.312 E0.01205 ; perimeter
G1 X114.773 Y115.227 E0.01268 ; perimeter
G1 X114.536 Y115.091 E0.01263 ; perimeter
G1 X114.247 Y114.803 E0.01890 ; perimeter
G1 X114.030 Y114.539 E0.01583 ; perimeter
G1 X113.906 Y114.260 E0.01414 ; perimeter
G1 X113.695 Y113.950 E0.01738 ; perimeter
G1 X113.473 Y113.711 E0.01511 ; perimeter
G1 X113.261 Y113.550 E0.01233 ; perimeter
G1 X113.132 Y113.330 E0.01181 ; perimeter
G1 X113.111 Y113.098 E0.01079 ; perimeter
G1 X113.181 Y112.987 E0.00609 ; perimeter
G1 X113.296 Y112.949 F10800.000 ; move inwards before travel
G1 X114.172 Y113.853 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.444475
G1 F2400.000
G1 X113.793 Y113.384 E0.02013 ; infill
G1 X113.473 Y113.065 E0.01509 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.793 Y113.384 E-0.11925 ; wipe and retract
G1 X114.172 Y113.853 E-0.15908 ; wipe and retract
;WIPE_END
G1 E-2.12168 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X106.784 Y108.564 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X106.779 Y108.515 E0.00225 ; perimeter
G1 X106.954 Y108.495 E0.00817 ; perimeter
G1 X107.373 Y108.585 E0.01988 ; perimeter
G1 X107.479 Y108.635 E0.00540 ; perimeter
G1 X107.729 Y108.681 E0.01180 ; perimeter
G1 X107.868 Y108.760 E0.00742 ; perimeter
G1 X108.179 Y108.766 E0.01442 ; perimeter
G1 X108.278 Y108.814 E0.00509 ; perimeter
G1 X108.732 Y108.840 E0.02103 ; perimeter
G1 X109.282 Y108.960 E0.02612 ; perimeter
G1 X109.539 Y109.080 E0.01311 ; perimeter
G1 X109.638 Y109.163 E0.00598 ; perimeter
G1 X109.661 Y109.303 E0.00656 ; perimeter
G1 X109.587 Y109.395 E0.00545 ; perimeter
G1 X109.420 Y109.480 E0.00867 ; perimeter
G1 X109.236 Y109.508 E0.00863 ; perimeter
G1 X109.078 Y109.585 E0.00813 ; perimeter
G1 X108.693 Y109.645 E0.01807 ; perimeter
G1 X108.340 Y109.659 E0.01635 ; perimeter
G1 X108.037 Y109.598 E0.01435 ; perimeter
G1 X107.665 Y109.418 E0.01912 ; perimeter
G1 X107.208 Y109.073 E0.02653 ; perimeter
G1 X106.974 Y108.834 E0.01549 ; perimeter
G1 X106.969 Y108.791 E0.00201 ; perimeter
G1 X106.822 Y108.610 E0.01078 ; perimeter
G1 X106.818 Y108.529 F10800.000 ; move inwards before travel
G1 X107.487 Y108.882 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.374803
G1 F2400.000
G1 X108.207 Y109.217 E0.02193 ; infill
;WIDTH:0.398453
G1 X108.653 Y109.241 E0.01321 ; infill
;WIDTH:0.293445
G1 X109.265 Y109.258 E0.01274 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.653 Y109.241 E-0.16133 ; wipe and retract
;WIPE_END
G1 E-2.23867 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X104.323 Y106.545 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.169 Y106.573 E0.00725 ; perimeter
G1 X104.092 Y106.548 E0.00378 ; perimeter
G1 X103.892 Y106.404 E0.01139 ; perimeter
G1 X103.828 Y106.326 E0.00468 ; perimeter
G1 X103.753 Y106.171 E0.00797 ; perimeter
G1 X103.589 Y105.945 E0.01295 ; perimeter
G1 X103.523 Y105.809 E0.00701 ; perimeter
G1 X103.145 Y105.418 E0.02517 ; perimeter
G1 X102.436 Y104.629 E0.04914 ; perimeter
G1 X102.105 Y104.230 E0.02400 ; perimeter
G1 X101.905 Y103.906 E0.01762 ; perimeter
G1 X101.846 Y103.617 E0.01369 ; perimeter
G1 X101.897 Y103.473 E0.00707 ; perimeter
G1 X101.904 Y103.326 E0.00679 ; perimeter
G1 X102.116 Y102.861 E0.02372 ; perimeter
G1 X102.268 Y102.678 E0.01100 ; perimeter
G1 X102.347 Y102.539 E0.00738 ; perimeter
G1 X102.555 Y102.393 E0.01177 ; perimeter
G1 X102.667 Y102.403 E0.00521 ; perimeter
G1 X102.784 Y102.556 E0.00891 ; perimeter
G1 X102.843 Y102.753 E0.00951 ; perimeter
G1 X102.832 Y102.866 E0.00528 ; perimeter
G1 X102.853 Y102.968 E0.00481 ; perimeter
G1 X102.762 Y103.393 E0.02012 ; perimeter
G1 X102.797 Y103.528 E0.00647 ; perimeter
G1 X102.794 Y103.833 E0.01411 ; perimeter
G1 X102.988 Y104.145 E0.01703 ; perimeter
G1 X103.223 Y104.401 E0.01608 ; perimeter
G1 X103.414 Y104.571 E0.01189 ; perimeter
G1 X103.711 Y104.906 E0.02071 ; perimeter
G1 X104.018 Y105.111 E0.01708 ; perimeter
G1 X104.466 Y105.491 E0.02724 ; perimeter
G1 X104.580 Y105.732 E0.01233 ; perimeter
G1 X104.617 Y106.069 E0.01571 ; perimeter
G1 X104.544 Y106.299 E0.01117 ; perimeter
G1 X104.447 Y106.453 E0.00846 ; perimeter
G1 X104.372 Y106.509 E0.00435 ; perimeter
G1 X104.199 Y106.450 F10800.000 ; move inwards before travel
G1 X104.360 Y106.084 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.401573
G1 F2400.000
G1 X103.854 Y105.542 E0.02212 ; infill
G1 X103.610 Y105.321 E0.00981 ; infill
;WIDTH:0.294681
G1 X103.447 Y105.182 E0.00449 ; infill
G1 X102.688 Y104.358 E0.02345 ; infill
;WIDTH:0.325014
G1 X102.558 Y104.177 E0.00521 ; infill
;WIDTH:0.355351
G1 X102.420 Y103.983 E0.00621 ; infill
;WIDTH:0.381678
G1 X102.151 Y103.366 E0.01895 ; infill
G1 X102.569 Y102.680 F10800.000 ; move to first infill point
;WIDTH:0.357689
G1 F2400.000
G1 X102.344 Y103.361 E0.01877 ; infill
G1 X102.329 Y103.429 E0.00182 ; infill
G1 X102.339 Y103.529 E0.00263 ; infill
;WIDTH:0.471691
G1 X102.329 Y103.651 E0.00436 ; infill
G1 X102.380 Y104.183 E0.01906 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.329 Y103.651 E-0.14110 ; wipe and retract
G1 X102.339 Y103.529 E-0.03224 ; wipe and retract
;WIPE_END
G1 E-2.22666 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X101.245 Y99.538 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.126 Y99.501 E0.00422 ; perimeter
G1 X101.100 Y99.453 E0.00186 ; perimeter
G1 X101.093 Y99.375 E0.00263 ; perimeter
G1 X101.204 Y99.494 E0.00551 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.126 Y99.501 E-0.02067 ; wipe and retract
G1 X101.100 Y99.453 E-0.01450 ; wipe and retract
G1 X101.093 Y99.375 E-0.02053 ; wipe and retract
G1 X101.204 Y99.494 E-0.04293 ; wipe and retract
;WIPE_END
G1 E-2.30137 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X102.779 Y96.466 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.883 Y96.337 E0.00559 ; perimeter
G1 X103.386 Y95.894 E0.02270 ; perimeter
G1 X103.715 Y95.678 E0.01332 ; perimeter
G1 X104.513 Y95.602 E0.02712 ; perimeter
G1 X105.115 Y95.640 E0.02043 ; perimeter
G1 X105.295 Y95.688 E0.00629 ; perimeter
G1 X105.489 Y95.845 E0.00846 ; perimeter
G1 X105.986 Y96.107 E0.01901 ; perimeter
G1 X106.915 Y96.286 E0.03203 ; perimeter
G1 X106.986 Y96.642 E0.01226 ; perimeter
G1 X107.107 Y96.857 E0.00837 ; perimeter
G1 X107.043 Y96.828 E0.00238 ; perimeter
G1 X106.207 Y96.717 E0.02856 ; perimeter
G1 X105.801 Y96.710 E0.01374 ; perimeter
G1 X105.464 Y96.740 E0.01146 ; perimeter
G1 X104.837 Y96.660 E0.02141 ; perimeter
G1 X104.216 Y96.706 E0.02105 ; perimeter
G1 X103.929 Y96.635 E0.01004 ; perimeter
G1 X103.807 Y96.630 E0.00412 ; perimeter
G1 X103.326 Y96.478 E0.01708 ; perimeter
G1 X102.839 Y96.467 E0.01648 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.883 Y96.337 E-0.03617 ; wipe and retract
G1 X103.386 Y95.894 E-0.17694 ; wipe and retract
G1 X103.715 Y95.678 E-0.10381 ; wipe and retract
G1 X104.513 Y95.602 E-0.21143 ; wipe and retract
G1 X105.115 Y95.640 E-0.15930 ; wipe and retract
G1 X105.295 Y95.688 E-0.04905 ; wipe and retract
G1 X105.489 Y95.845 E-0.06595 ; wipe and retract
G1 X105.986 Y96.107 E-0.14821 ; wipe and retract
G1 X106.915 Y96.286 E-0.24972 ; wipe and retract
G1 X106.986 Y96.642 E-0.09558 ; wipe and retract
G1 X107.107 Y96.857 E-0.06527 ; wipe and retract
G1 X107.043 Y96.828 E-0.01856 ; wipe and retract
G1 X106.207 Y96.717 E-0.22265 ; wipe and retract
G1 X105.801 Y96.710 E-0.10709 ; wipe and retract
G1 X105.464 Y96.740 E-0.08932 ; wipe and retract
G1 X104.837 Y96.660 E-0.16690 ; wipe and retract
G1 X104.216 Y96.706 E-0.16410 ; wipe and retract
G1 X103.929 Y96.635 E-0.07824 ; wipe and retract
G1 X103.807 Y96.630 E-0.03211 ; wipe and retract
G1 X103.664 Y96.585 E-0.03958 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 X108.854 Y97.780 ; move to first perimeter point
G1 Z26.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.963 Y97.769 E0.00372 ; perimeter
G1 X109.226 Y97.808 E0.00899 ; perimeter
G1 X109.160 Y98.037 E0.00806 ; perimeter
G1 X108.899 Y97.818 E0.01152 ; perimeter
G1 X109.754 Y97.577 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.755 Y97.724 E0.00681 ; perimeter
G1 X109.645 Y98.093 E0.01783 ; perimeter
G1 X109.698 Y98.260 E0.00811 ; perimeter
G1 X109.681 Y98.408 E0.00689 ; perimeter
G1 X109.786 Y98.658 E0.01257 ; perimeter
G1 X109.774 Y98.795 E0.00634 ; perimeter
G1 X109.857 Y98.963 E0.00870 ; perimeter
G1 X109.873 Y99.081 E0.00553 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.876 Y99.105 E0.00101 ; perimeter (bridge)
G1 X109.818 Y99.083 E0.00259 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.510 Y98.961 E0.01536 ; perimeter
G1 X108.575 Y98.175 E0.05658 ; perimeter
G1 X107.613 Y97.619 E0.05146 ; perimeter
G1 X106.908 Y97.296 E0.03591 ; perimeter
G1 X106.171 Y97.198 E0.03446 ; perimeter
G1 X105.818 Y97.192 E0.01633 ; perimeter
G1 X105.455 Y97.225 E0.01691 ; perimeter
G1 X105.361 Y97.213 E0.00438 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.301 Y97.205 E0.00253 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.824 Y97.144 E0.02229 ; perimeter
G1 X104.175 Y97.192 E0.03012 ; perimeter
G1 X103.860 Y97.114 E0.01502 ; perimeter
G1 X103.724 Y97.109 E0.00635 ; perimeter
G1 X103.246 Y96.958 E0.02318 ; perimeter
G1 X102.841 Y96.949 E0.01879 ; perimeter
G1 X101.900 Y97.236 E0.04555 ; perimeter
G1 X101.551 Y97.449 E0.01896 ; perimeter
G1 X101.272 Y97.829 E0.02183 ; perimeter
G1 X101.186 Y98.481 E0.03048 ; perimeter
G1 X101.368 Y98.963 E0.02388 ; perimeter
G1 X101.638 Y99.252 E0.01829 ; perimeter
G1 X101.801 Y99.374 E0.00944 ; perimeter
G1 X101.876 Y99.497 E0.00668 ; perimeter
G1 X102.041 Y99.682 E0.01148 ; perimeter
G1 X102.008 Y99.949 E0.01249 ; perimeter
G1 X101.938 Y100.009 E0.00426 ; perimeter
G1 X101.622 Y100.081 E0.01502 ; perimeter
G1 X101.169 Y100.019 E0.02115 ; perimeter
G1 X100.853 Y99.921 E0.01534 ; perimeter
G1 X100.693 Y99.738 E0.01125 ; perimeter
G1 X100.625 Y99.562 E0.00873 ; perimeter
G1 X100.600 Y99.262 E0.01393 ; perimeter
G1 X100.808 Y98.335 E0.04404 ; perimeter
G1 X101.211 Y97.222 E0.05480 ; perimeter
G1 X101.428 Y96.907 E0.01777 ; perimeter
G1 X101.621 Y96.705 E0.01294 ; perimeter
G1 X102.151 Y96.305 E0.03076 ; perimeter
G1 X102.411 Y96.154 E0.01392 ; perimeter
G1 X102.534 Y96.002 E0.00905 ; perimeter
G1 X103.093 Y95.510 E0.03453 ; perimeter
G1 X103.534 Y95.221 E0.02440 ; perimeter
G1 X103.584 Y95.208 E0.00239 ; perimeter
G1 X104.509 Y95.119 E0.04307 ; perimeter
G1 X105.193 Y95.162 E0.03173 ; perimeter
G1 X105.488 Y95.240 E0.01413 ; perimeter
G1 X105.632 Y95.329 E0.00785 ; perimeter
G1 X105.764 Y95.445 E0.00813 ; perimeter
G1 X106.147 Y95.647 E0.02009 ; perimeter
G1 X107.036 Y95.818 E0.04190 ; perimeter
G1 X107.200 Y95.877 E0.00808 ; perimeter
G1 X107.285 Y95.944 E0.00503 ; perimeter
G1 X107.391 Y96.091 E0.00840 ; perimeter
G1 X107.436 Y96.221 E0.00635 ; perimeter
G1 X107.409 Y96.315 E0.00455 ; perimeter
G1 X107.442 Y96.469 E0.00730 ; perimeter
G1 X107.635 Y96.812 E0.01823 ; perimeter
G1 X108.089 Y97.100 E0.02491 ; perimeter
G1 X108.722 Y97.309 E0.03087 ; perimeter
G1 X108.967 Y97.284 E0.01138 ; perimeter
G1 X109.221 Y97.313 E0.01188 ; perimeter
G1 X109.487 Y97.373 E0.01261 ; perimeter
G1 X109.576 Y97.407 E0.00442 ; perimeter
G1 X109.719 Y97.528 E0.00867 ; perimeter
G1 X109.655 Y97.686 F10800.000 ; move inwards before travel
G1 X109.419 Y98.175 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.178656
G1 F2400.000
G1 X109.367 Y98.437 E0.00301 ; infill
G1 X109.457 Y98.600 E0.00210 ; infill
G1 X108.166 Y97.513 F10800.000 ; move to first infill point
;WIDTH:0.297542
G1 F2400.000
G1 X107.953 Y97.417 E0.00494 ; infill
;WIDTH:0.249542
G1 X107.392 Y97.104 E0.01105 ; infill
G1 X107.388 Y96.998 E0.00181 ; infill
;WIDTH:0.240687
G1 X107.386 Y96.911 E0.00144 ; infill
G1 X106.752 Y96.523 F10800.000 ; move to first infill point
;WIDTH:0.193927
G1 F2400.000
G1 X105.898 Y96.404 E0.01083 ; infill
G1 X105.728 Y96.362 E0.00220 ; infill
G1 X105.611 Y96.328 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.531415
G1 F3600.000
G1 X105.453 Y96.171 E0.00903 ; infill
G1 X105.321 Y96.101 E0.00610 ; infill
G1 X105.154 Y95.966 E0.00871 ; infill
G1 X105.066 Y95.943 E0.00369 ; infill
G1 X104.518 Y95.908 E0.02231 ; infill
G1 X104.501 Y95.910 E0.00068 ; infill
G1 X104.959 Y96.368 E0.02631 ; infill
G1 X104.845 Y96.353 E0.00469 ; infill
G1 X104.295 Y96.394 E0.02241 ; infill
G1 X103.721 Y95.821 E0.03293 ; infill
G1 X102.167 Y96.763 F10800.000 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.310855
G1 F2400.000
G1 X102.054 Y96.820 E0.00283 ; infill
;WIDTH:0.266505
G1 X101.940 Y96.878 E0.00237 ; infill
;WIDTH:0.222155
G1 X101.827 Y96.936 E0.00190 ; infill
;WIDTH:0.177806
G1 X101.785 Y96.962 E0.00055 ; infill
;WIDTH:0.152844
G1 X101.639 Y97.078 E0.00171 ; infill
;WIDTH:0.102261
G1 X101.610 Y97.105 E0.00020 ; infill
;LAYER_CHANGE
;Z:26.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;26.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.639 Y97.078 E-0.01050 ; wipe and retract
;WIPE_END
G1 E-2.38950 F2400.000 ; retract
G1 Z26.675 F10800.000 ; lift Z
G1 Z26.800 ; move to next layer (133)
;AFTER_LAYER_CHANGE
;26.8
G1 Z26.875 ; lift Z
G1 X107.409 Y108.827 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.670 Y108.816 E0.01210 ; perimeter
G1 X107.973 Y108.854 E0.01415 ; perimeter
G1 X108.583 Y108.825 E0.02827 ; perimeter
G1 X109.155 Y108.861 E0.02654 ; perimeter
G1 X109.739 Y108.985 E0.02765 ; perimeter
G1 X109.874 Y109.052 E0.00697 ; perimeter
G1 X110.063 Y109.189 E0.01083 ; perimeter
G1 X110.089 Y109.289 E0.00477 ; perimeter
G1 X109.975 Y109.425 E0.00820 ; perimeter
G1 X109.675 Y109.554 E0.01515 ; perimeter
G1 X109.161 Y109.651 E0.02423 ; perimeter
G1 X108.611 Y109.647 E0.02546 ; perimeter
G1 X108.304 Y109.588 E0.01450 ; perimeter
G1 X107.912 Y109.444 E0.01933 ; perimeter
G1 X107.593 Y109.201 E0.01857 ; perimeter
G1 X107.432 Y109.019 E0.01126 ; perimeter
G1 X107.416 Y108.886 E0.00621 ; perimeter
G1 X107.655 Y108.915 F10800.000 ; move inwards before travel
G1 X107.894 Y109.107 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.121954
G1 F2400.000
G1 X107.961 Y109.134 E0.00048 ; infill
;WIDTH:0.153982
G1 X108.773 Y109.407 E0.00790 ; infill
G1 X109.126 Y109.258 F10800.000 ; move to first infill point
;WIDTH:0.35293
G1 F2400.000
G1 X108.467 Y109.228 E0.01702 ; infill
;WIDTH:0.329682
G1 X108.397 Y109.222 E0.00166 ; infill
;WIDTH:0.314359
G1 X108.159 Y109.187 E0.00545 ; infill
;WIDTH:0.281464
G1 X107.920 Y109.152 E0.00479 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.159 Y109.187 E-0.06368 ; wipe and retract
;WIPE_END
G1 E-2.33632 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X115.406 Y112.649 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.280 Y112.590 E0.00645 ; perimeter
G1 X115.113 Y112.446 E0.01021 ; perimeter
G1 X115.065 Y112.159 E0.01347 ; perimeter
G1 X115.241 Y111.706 E0.02251 ; perimeter
G1 X115.452 Y111.590 E0.01114 ; perimeter
G1 X115.648 Y111.613 E0.00914 ; perimeter
G1 X115.825 Y111.765 E0.01082 ; perimeter
G1 X115.875 Y111.920 E0.00754 ; perimeter
G1 X115.880 Y112.123 E0.00940 ; perimeter
G1 X115.844 Y112.317 E0.00913 ; perimeter
G1 X115.754 Y112.516 E0.01011 ; perimeter
G1 X115.684 Y112.613 E0.00554 ; perimeter
G1 X115.519 Y112.703 E0.00869 ; perimeter
G1 X115.448 Y112.885 E0.00908 ; perimeter
G1 X115.416 Y112.708 E0.00831 ; perimeter
G1 X115.394 Y112.510 F10800.000 ; move inwards before travel
G1 X115.170 Y113.915 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.192 Y114.040 E0.00428 ; perimeter
G1 X115.264 Y114.246 E0.00739 ; perimeter
G1 X115.292 Y114.790 E0.01845 ; perimeter
G1 X115.278 Y114.843 E0.00183 ; perimeter
G1 X115.082 Y114.785 E0.00691 ; perimeter
G1 X114.868 Y114.590 E0.00980 ; perimeter
G1 X114.687 Y114.365 E0.00978 ; perimeter
G1 X114.467 Y114.194 E0.00942 ; perimeter
G1 X114.360 Y114.067 E0.00563 ; perimeter
G1 X114.306 Y113.946 E0.00448 ; perimeter
G1 X114.137 Y113.696 E0.01021 ; perimeter
G1 X113.778 Y113.319 E0.01761 ; perimeter
G1 X113.747 Y113.266 E0.00209 ; perimeter
G1 X113.890 Y113.224 E0.00501 ; perimeter
G1 X114.257 Y113.704 E0.02046 ; perimeter
G1 X114.589 Y113.872 E0.01259 ; perimeter
G1 X115.111 Y113.925 E0.01777 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.192 Y114.040 E-0.03703 ; wipe and retract
G1 X115.264 Y114.246 E-0.05758 ; wipe and retract
G1 X115.292 Y114.790 E-0.14381 ; wipe and retract
G1 X115.278 Y114.843 E-0.01428 ; wipe and retract
G1 X115.082 Y114.785 E-0.05391 ; wipe and retract
G1 X114.868 Y114.590 E-0.07641 ; wipe and retract
G1 X114.687 Y114.365 E-0.07626 ; wipe and retract
G1 X114.467 Y114.194 E-0.07345 ; wipe and retract
G1 X114.360 Y114.067 E-0.04391 ; wipe and retract
G1 X114.306 Y113.946 E-0.03491 ; wipe and retract
G1 X114.137 Y113.696 E-0.07961 ; wipe and retract
G1 X113.778 Y113.319 E-0.13733 ; wipe and retract
G1 X113.747 Y113.266 E-0.01626 ; wipe and retract
G1 X113.890 Y113.224 E-0.03904 ; wipe and retract
G1 X114.257 Y113.704 E-0.15948 ; wipe and retract
G1 X114.589 Y113.872 E-0.09814 ; wipe and retract
G1 X115.111 Y113.925 E-0.13853 ; wipe and retract
;WIPE_END
G1 E-1.12008 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X113.303 Y112.978 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.441 Y112.866 E0.00824 ; perimeter
G1 X113.729 Y112.757 E0.01428 ; perimeter
G1 X114.068 Y112.735 E0.01574 ; perimeter
G1 X114.201 Y112.800 E0.00686 ; perimeter
G1 X114.254 Y112.908 E0.00558 ; perimeter
G1 X114.573 Y113.324 E0.02425 ; perimeter
G1 X114.728 Y113.402 E0.00806 ; perimeter
G1 X115.085 Y113.441 E0.01663 ; perimeter
G1 X115.406 Y113.388 E0.01510 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X115.438 Y113.383 E0.00136 ; perimeter (bridge)
G1 X115.442 Y113.345 E0.00160 ; perimeter (bridge)
G1 X115.482 Y113.426 E0.00378 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X115.628 Y113.732 E0.01570 ; perimeter
G1 X115.660 Y113.918 E0.00876 ; perimeter
G1 X115.742 Y114.152 E0.01145 ; perimeter
G1 X115.777 Y114.839 E0.03190 ; perimeter
G1 X115.720 Y115.061 E0.01058 ; perimeter
G1 X115.652 Y115.195 E0.00697 ; perimeter
G1 X115.415 Y115.325 E0.01253 ; perimeter
G1 X115.289 Y115.335 E0.00582 ; perimeter
G1 X115.098 Y115.299 E0.00904 ; perimeter
G1 X114.808 Y115.188 E0.01438 ; perimeter
G1 X114.516 Y114.921 E0.01831 ; perimeter
G1 X114.346 Y114.711 E0.01251 ; perimeter
G1 X114.131 Y114.543 E0.01265 ; perimeter
G1 X113.947 Y114.325 E0.01320 ; perimeter
G1 X113.883 Y114.181 E0.00730 ; perimeter
G1 X113.757 Y113.995 E0.01041 ; perimeter
G1 X113.503 Y113.715 E0.01751 ; perimeter
G1 X113.410 Y113.644 E0.00545 ; perimeter
G1 X113.259 Y113.384 E0.01393 ; perimeter
G1 X113.246 Y113.103 E0.01299 ; perimeter
G1 X113.278 Y113.033 E0.00359 ; perimeter
G1 X113.480 Y112.997 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.441 Y112.866 E-0.06155 ; wipe and retract
G1 X113.729 Y112.757 E-0.08137 ; wipe and retract
G1 X114.068 Y112.735 E-0.08965 ; wipe and retract
G1 X114.201 Y112.800 E-0.03905 ; wipe and retract
G1 X114.254 Y112.908 E-0.03180 ; wipe and retract
G1 X114.573 Y113.324 E-0.13817 ; wipe and retract
G1 X114.728 Y113.402 E-0.04590 ; wipe and retract
G1 X115.085 Y113.441 E-0.09474 ; wipe and retract
G1 X115.406 Y113.388 E-0.08602 ; wipe and retract
;WIPE_END
G1 E-1.73177 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X115.070 Y114.444 ; move to first infill point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.225538
G1 F2400.000
G1 X114.883 Y114.109 E0.00583 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.070 Y114.444 E-0.10140 ; wipe and retract
;WIPE_END
G1 E-2.29860 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X115.069 Y104.615 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.142 Y104.555 E0.00436 ; perimeter
G1 X115.317 Y104.685 E0.01008 ; perimeter
G1 X115.414 Y104.858 E0.00918 ; perimeter
G1 X115.440 Y105.229 E0.01725 ; perimeter
G1 X115.297 Y105.464 E0.01274 ; perimeter
G1 X114.934 Y105.775 E0.02216 ; perimeter
G1 X114.628 Y105.922 E0.01572 ; perimeter
G1 X114.517 Y105.997 E0.00620 ; perimeter
G1 X114.323 Y106.062 E0.00946 ; perimeter
G1 X114.104 Y106.095 E0.01027 ; perimeter
G1 X114.017 Y106.128 E0.00432 ; perimeter
G1 X113.813 Y106.128 E0.00946 ; perimeter
G1 X113.721 Y106.095 E0.00453 ; perimeter
G1 X113.690 Y106.039 E0.00294 ; perimeter
G1 X113.710 Y105.922 E0.00550 ; perimeter
G1 X113.892 Y105.609 E0.01679 ; perimeter
G1 X114.104 Y105.393 E0.01399 ; perimeter
G1 X114.383 Y105.188 E0.01607 ; perimeter
G1 X114.563 Y105.101 E0.00921 ; perimeter
G1 X115.035 Y104.757 E0.02709 ; perimeter
G1 X115.055 Y104.673 E0.00399 ; perimeter
G1 X115.158 Y104.646 F10800.000 ; move inwards before travel
G1 X115.188 Y105.087 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.317016
G1 F2400.000
G1 X114.747 Y105.434 E0.01279 ; infill
G1 X114.465 Y105.588 E0.00733 ; infill
;WIDTH:0.302353
G1 X114.353 Y105.666 E0.00294 ; infill
;WIDTH:0.294413
G1 X114.040 Y105.827 E0.00736 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.353 Y105.666 E-0.09289 ; wipe and retract
;WIPE_END
G1 E-2.30711 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X113.380 Y101.633 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.244 Y101.679 E0.00662 ; perimeter
G1 X112.982 Y101.712 E0.01227 ; perimeter
G1 X112.497 Y101.609 E0.02296 ; perimeter
G1 X112.154 Y101.466 E0.01721 ; perimeter
G1 X111.866 Y101.307 E0.01522 ; perimeter
G1 X111.577 Y101.092 E0.01671 ; perimeter
G1 X111.346 Y100.813 E0.01676 ; perimeter
G1 X111.314 Y100.731 E0.00406 ; perimeter
G1 X111.263 Y100.670 E0.00368 ; perimeter
G1 X111.308 Y100.556 E0.00571 ; perimeter
G1 X111.807 Y100.564 E0.02313 ; perimeter
G1 X112.169 Y100.632 E0.01706 ; perimeter
G1 X112.427 Y100.718 E0.01259 ; perimeter
G1 X112.722 Y100.875 E0.01546 ; perimeter
G1 X113.089 Y101.133 E0.02082 ; perimeter
G1 X113.306 Y101.372 E0.01494 ; perimeter
G1 X113.380 Y101.530 E0.00809 ; perimeter
G1 X113.380 Y101.573 E0.00199 ; perimeter
G1 X113.240 Y101.602 F10800.000 ; move inwards before travel
G1 X112.999 Y101.467 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.329071
G1 F2400.000
G1 X112.521 Y101.203 E0.01299 ; infill
G1 X112.075 Y100.995 E0.01170 ; infill
;WIDTH:0.308222
G1 X111.697 Y100.859 E0.00885 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.075 Y100.995 E-0.10591 ; wipe and retract
;WIPE_END
G1 E-2.29409 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X109.118 Y98.074 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.840 Y97.814 E0.01286 ; perimeter
G1 X109.059 Y97.857 E0.00753 ; perimeter
G1 X109.131 Y97.896 E0.00280 ; perimeter
G1 X109.098 Y98.017 E0.00425 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.840 Y97.814 E-0.08654 ; wipe and retract
G1 X109.059 Y97.857 E-0.05872 ; wipe and retract
G1 X109.131 Y97.896 E-0.02179 ; wipe and retract
G1 X109.098 Y98.017 E-0.03314 ; wipe and retract
;WIPE_END
G1 E-2.19981 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X107.162 Y96.955 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X106.842 Y96.876 E0.01117 ; perimeter
G1 X106.343 Y96.804 E0.01705 ; perimeter
G1 X105.674 Y96.936 E0.02310 ; perimeter
G1 X105.302 Y96.976 E0.01265 ; perimeter
G1 X104.827 Y96.991 E0.01609 ; perimeter
G1 X104.695 Y97.024 E0.00460 ; perimeter
G1 X104.280 Y97.029 E0.01405 ; perimeter
G1 X103.917 Y96.743 E0.01564 ; perimeter
G1 X103.052 Y96.448 E0.03094 ; perimeter
G1 X102.863 Y96.457 E0.00641 ; perimeter
G1 X103.262 Y96.133 E0.01741 ; perimeter
G1 X103.429 Y96.022 E0.00680 ; perimeter
G1 X103.890 Y95.873 E0.01640 ; perimeter
G1 X104.542 Y95.755 E0.02242 ; perimeter
G1 X105.117 Y95.746 E0.01947 ; perimeter
G1 X105.269 Y95.789 E0.00534 ; perimeter
G1 X105.520 Y95.930 E0.00976 ; perimeter
G1 X105.997 Y96.151 E0.01780 ; perimeter
G1 X106.704 Y96.354 E0.02489 ; perimeter
G1 X106.846 Y96.426 E0.00538 ; perimeter
G1 X106.999 Y96.811 E0.01403 ; perimeter
G1 X107.130 Y96.904 E0.00545 ; perimeter
G1 X107.602 Y96.749 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.181 Y97.097 E0.03132 ; perimeter
G1 X108.480 Y97.189 E0.01447 ; perimeter
G1 X108.723 Y97.299 E0.01235 ; perimeter
G1 X109.224 Y97.398 E0.02367 ; perimeter
G1 X109.455 Y97.523 E0.01216 ; perimeter
G1 X109.598 Y97.706 E0.01076 ; perimeter
G1 X109.635 Y97.885 E0.00848 ; perimeter
G1 X109.603 Y97.999 E0.00548 ; perimeter
G1 X109.756 Y98.429 E0.02113 ; perimeter
G1 X109.899 Y98.608 E0.01061 ; perimeter
G1 X109.979 Y98.789 E0.00914 ; perimeter
G1 X110.132 Y99.034 E0.01343 ; perimeter
G1 X110.187 Y99.162 E0.00645 ; perimeter
G1 X110.206 Y99.302 E0.00651 ; perimeter
G1 X110.275 Y99.446 E0.00741 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.309 Y99.519 E0.00337 ; perimeter (bridge)
G1 X110.327 Y99.714 E0.00819 ; perimeter (bridge)
G1 X110.097 Y99.609 E0.01058 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.849 Y99.445 E0.01379 ; perimeter
G1 X109.263 Y98.918 E0.03649 ; perimeter
G1 X108.995 Y98.620 E0.01855 ; perimeter
G1 X108.529 Y98.182 E0.02963 ; perimeter
G1 X107.831 Y97.774 E0.03747 ; perimeter
G1 X107.007 Y97.413 E0.04164 ; perimeter
G1 X106.749 Y97.350 E0.01230 ; perimeter
G1 X106.355 Y97.293 E0.01843 ; perimeter
G1 X105.746 Y97.413 E0.02877 ; perimeter
G1 X105.335 Y97.457 E0.01914 ; perimeter
G1 X104.895 Y97.471 E0.02041 ; perimeter
G1 X104.757 Y97.506 E0.00659 ; perimeter
G1 X104.362 Y97.508 E0.01827 ; perimeter
G1 X104.277 Y97.534 E0.00412 ; perimeter
G1 X104.011 Y97.469 E0.01272 ; perimeter
G1 X103.919 Y97.353 E0.00682 ; perimeter
G1 X103.686 Y97.174 E0.01362 ; perimeter
G1 X102.983 Y96.934 E0.03441 ; perimeter
G1 X102.570 Y96.954 E0.01916 ; perimeter
G1 X102.349 Y97.022 E0.01072 ; perimeter
G1 X101.934 Y97.092 E0.01951 ; perimeter
G1 X101.666 Y97.102 E0.01241 ; perimeter
G1 X101.625 Y97.075 E0.00228 ; perimeter
G1 X101.647 Y96.990 E0.00410 ; perimeter
G1 X101.709 Y96.894 E0.00531 ; perimeter
G1 X101.803 Y96.808 E0.00588 ; perimeter
G1 X101.981 Y96.554 E0.01438 ; perimeter
G1 X102.976 Y95.743 E0.05945 ; perimeter
G1 X103.219 Y95.584 E0.01345 ; perimeter
G1 X103.772 Y95.405 E0.02695 ; perimeter
G1 X104.495 Y95.273 E0.03401 ; perimeter
G1 X105.180 Y95.263 E0.03173 ; perimeter
G1 X105.455 Y95.340 E0.01325 ; perimeter
G1 X105.740 Y95.501 E0.01515 ; perimeter
G1 X106.166 Y95.698 E0.02174 ; perimeter
G1 X106.881 Y95.903 E0.03448 ; perimeter
G1 X107.206 Y96.087 E0.01728 ; perimeter
G1 X107.300 Y96.227 E0.00781 ; perimeter
G1 X107.401 Y96.505 E0.01373 ; perimeter
G1 X107.490 Y96.569 E0.00507 ; perimeter
G1 X107.570 Y96.698 E0.00702 ; perimeter
G1 X107.549 Y97.146 F10800.000 ; move inwards before travel
G1 X107.828 Y97.344 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.325886
G1 F2400.000
G1 X108.041 Y97.454 E0.00564 ; infill
;WIDTH:0.362432
G1 X108.186 Y97.518 E0.00421 ; infill
;WIDTH:0.39898
G1 X108.331 Y97.581 E0.00469 ; infill
;WIDTH:0.412587
G1 X108.614 Y97.728 E0.00978 ; infill
G1 X109.845 Y99.030 F10800.000 ; move to first infill point
;WIDTH:0.252999
G1 F2400.000
G1 X109.459 Y98.615 E0.00990 ; infill
G1 X109.345 Y98.430 E0.00381 ; infill
;WIDTH:0.346635
G1 X109.252 Y98.274 E0.00458 ; infill
G1 X109.222 Y98.293 F10800.000 ; move to first infill point
;WIDTH:0.124498
G1 F2400.000
G1 X109.863 Y99.102 E0.00700 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.222 Y98.293 E-0.27246 ; wipe and retract
;WIPE_END
G1 E-2.12754 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X106.714 Y96.621 ; move to first infill point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.138793
G1 F2400.000
G1 X106.347 Y96.532 E0.00301 ; infill
G1 X105.988 Y96.487 E0.00289 ; infill
G1 X104.840 Y96.868 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.484212
G1 F3600.000
G1 X105.466 Y96.242 E0.03250 ; infill
G1 X105.151 Y96.073 E0.01314 ; infill
G1 X105.031 Y96.053 E0.00443 ; infill
G1 X104.371 Y96.713 E0.03425 ; infill
G1 X104.065 Y96.471 E0.01431 ; infill
G1 X104.008 Y96.452 E0.00221 ; infill
G1 X104.584 Y95.876 E0.02987 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.008 Y96.452 E-0.21483 ; wipe and retract
G1 X104.065 Y96.471 E-0.01587 ; wipe and retract
G1 X104.371 Y96.713 E-0.10292 ; wipe and retract
G1 X105.031 Y96.053 E-0.24632 ; wipe and retract
G1 X105.151 Y96.073 E-0.03189 ; wipe and retract
G1 X105.466 Y96.242 E-0.09450 ; wipe and retract
G1 X104.840 Y96.868 E-0.23370 ; wipe and retract
;WIPE_END
G1 E-1.45996 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X102.699 Y96.705 ; move to first infill point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.295602
G1 F2400.000
G1 X102.520 Y96.589 E0.00450 ; infill
G1 X102.493 Y96.601 E0.00061 ; infill
;WIDTH:0.281129
G1 X102.293 Y96.708 E0.00450 ; infill
;WIDTH:0.2343
G1 X102.092 Y96.815 E0.00362 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.293 Y96.708 E-0.06000 ; wipe and retract
;WIPE_END
G1 E-2.34000 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X103.990 Y105.618 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.133 Y105.656 E0.00500 ; perimeter
G1 X104.182 Y105.691 E0.00204 ; perimeter
G1 X104.185 Y105.867 E0.00598 ; perimeter
G1 X104.027 Y105.665 E0.00869 ; perimeter
G1 X104.192 Y106.428 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.062 Y106.394 E0.00623 ; perimeter
G1 X103.905 Y106.291 E0.00872 ; perimeter
G1 X103.437 Y105.694 E0.03512 ; perimeter
G1 X103.017 Y105.219 E0.02940 ; perimeter
G1 X102.429 Y104.438 E0.04525 ; perimeter
G1 X102.306 Y104.187 E0.01298 ; perimeter
G1 X102.127 Y103.988 E0.01239 ; perimeter
G1 X102.076 Y103.904 E0.00456 ; perimeter
G1 X102.018 Y103.753 E0.00747 ; perimeter
G1 X101.969 Y103.513 E0.01137 ; perimeter
G1 X101.995 Y103.141 E0.01728 ; perimeter
G1 X102.151 Y102.774 E0.01848 ; perimeter
G1 X102.182 Y102.641 E0.00631 ; perimeter
G1 X102.286 Y102.490 E0.00849 ; perimeter
G1 X102.456 Y102.125 E0.01865 ; perimeter
G1 X102.580 Y102.053 E0.00665 ; perimeter
G1 X102.618 Y101.897 E0.00744 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.637 Y101.823 E0.00319 ; perimeter (bridge)
G1 X102.657 Y101.818 E0.00085 ; perimeter (bridge)
G1 X102.693 Y101.903 E0.00387 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.838 Y102.106 E0.01154 ; perimeter
G1 X102.930 Y102.340 E0.01163 ; perimeter
G1 X102.938 Y102.464 E0.00575 ; perimeter
G1 X102.972 Y102.586 E0.00588 ; perimeter
G1 X102.957 Y102.730 E0.00671 ; perimeter
G1 X102.884 Y103.036 E0.01459 ; perimeter
G1 X102.750 Y103.379 E0.01701 ; perimeter
G1 X102.726 Y103.736 E0.01658 ; perimeter
G1 X102.802 Y104.019 E0.01361 ; perimeter
G1 X103.055 Y104.378 E0.02033 ; perimeter
G1 X103.236 Y104.494 E0.00998 ; perimeter
G1 X103.710 Y104.960 E0.03078 ; perimeter
G1 X103.826 Y104.979 E0.00545 ; perimeter
G1 X104.072 Y105.141 E0.01367 ; perimeter
G1 X104.338 Y105.213 E0.01276 ; perimeter
G1 X104.588 Y105.385 E0.01406 ; perimeter
G1 X104.675 Y105.580 E0.00988 ; perimeter
G1 X104.659 Y105.767 E0.00870 ; perimeter
G1 X104.676 Y105.888 E0.00567 ; perimeter
G1 X104.599 Y106.136 E0.01203 ; perimeter
G1 X104.472 Y106.291 E0.00925 ; perimeter
G1 X104.324 Y106.403 E0.00859 ; perimeter
G1 X104.251 Y106.417 E0.00344 ; perimeter
G1 X104.127 Y106.310 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.062 Y106.394 E-0.05030 ; wipe and retract
G1 X103.905 Y106.291 E-0.04968 ; wipe and retract
G1 X103.437 Y105.694 E-0.20009 ; wipe and retract
G1 X103.017 Y105.219 E-0.16747 ; wipe and retract
G1 X102.429 Y104.438 E-0.25776 ; wipe and retract
G1 X102.306 Y104.187 E-0.07393 ; wipe and retract
G1 X102.127 Y103.988 E-0.07056 ; wipe and retract
G1 X102.076 Y103.904 E-0.02600 ; wipe and retract
G1 X102.018 Y103.753 E-0.04254 ; wipe and retract
G1 X101.969 Y103.513 E-0.06476 ; wipe and retract
G1 X101.995 Y103.141 E-0.09843 ; wipe and retract
G1 X102.151 Y102.774 E-0.10528 ; wipe and retract
G1 X102.182 Y102.641 E-0.03597 ; wipe and retract
G1 X102.286 Y102.490 E-0.04838 ; wipe and retract
G1 X102.456 Y102.125 E-0.10623 ; wipe and retract
G1 X102.580 Y102.053 E-0.03788 ; wipe and retract
G1 X102.618 Y101.897 E-0.04238 ; wipe and retract
;WIPE_END
G1 E-0.92236 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X101.011 Y98.676 ; move to first perimeter point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.383 Y99.083 E0.02554 ; perimeter
G1 X101.612 Y99.220 E0.01240 ; perimeter
G1 X101.752 Y99.260 E0.00671 ; perimeter
G1 X101.898 Y99.368 E0.00842 ; perimeter
G1 X102.139 Y99.392 E0.01125 ; perimeter
G1 X102.267 Y99.491 E0.00748 ; perimeter
G1 X102.396 Y99.515 E0.00609 ; perimeter
G1 X102.330 Y99.893 E0.01779 ; perimeter
G1 X102.338 Y100.325 E0.02002 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.333 Y100.771 E0.01863 ; perimeter (bridge)
G1 X102.225 Y100.559 E0.00993 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.180 Y100.455 E0.00525 ; perimeter
G1 X101.929 Y100.321 E0.01318 ; perimeter
G1 X101.740 Y100.172 E0.01114 ; perimeter
G1 X101.571 Y100.154 E0.00790 ; perimeter
G1 X101.420 Y100.057 E0.00826 ; perimeter
G1 X101.314 Y100.046 E0.00498 ; perimeter
G1 X101.254 Y99.996 E0.00359 ; perimeter
G1 X101.013 Y99.926 E0.01163 ; perimeter
G1 X100.883 Y99.774 E0.00926 ; perimeter
G1 X100.779 Y99.533 E0.01213 ; perimeter
G1 X100.753 Y99.310 E0.01044 ; perimeter
G1 X100.812 Y99.021 E0.01365 ; perimeter
G1 X100.966 Y98.715 E0.01585 ; perimeter
G1 X101.153 Y99.050 F10800.000 ; move inwards before travel
G1 X101.033 Y99.142 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.303152
G1 F2400.000
G1 X101.132 Y99.359 E0.00518 ; infill
;WIDTH:0.335767
G1 X101.153 Y99.397 E0.00105 ; infill
;WIDTH:0.376961
G1 X101.509 Y99.828 E0.01550 ; infill
G1 X101.488 Y99.632 F10800.000 ; move to first infill point
;WIDTH:0.421159
G1 F2400.000
G1 X101.524 Y99.639 E0.00115 ; infill
;WIDTH:0.326328
G1 X101.713 Y99.750 E0.00516 ; infill
G1 X101.926 Y99.789 E0.00510 ; infill
G1 X102.069 Y100.124 E0.00859 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.926 Y99.789 E-0.09622 ; wipe and retract
G1 X101.713 Y99.750 E-0.05709 ; wipe and retract
G1 X101.524 Y99.639 E-0.05777 ; wipe and retract
;WIPE_END
G1 E-2.18892 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 X102.281 Y103.085 ; move to first infill point
G1 Z26.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.242096
G1 F2400.000
G1 X102.393 Y103.783 E0.01172 ; infill
;WIDTH:0.227765
G1 X102.506 Y104.048 E0.00443 ; infill
G1 X102.385 Y103.914 F10800.000 ; move to first infill point
;WIDTH:0.279782
G1 F2400.000
G1 X102.357 Y103.487 E0.00843 ; infill
G1 X102.375 Y103.272 E0.00425 ; infill
G1 X102.600 Y102.669 E0.01267 ; infill
G1 X102.683 Y102.370 E0.00611 ; infill
G1 X102.653 Y102.295 F10800.000 ; move to first infill point
;WIDTH:0.201673
G1 F2400.000
G1 X102.518 Y103.312 E0.01354 ; infill
G1 X102.619 Y104.222 F10800.000 ; move to first infill point
;WIDTH:0.101401
G1 F2400.000
G1 X102.869 Y104.580 E0.00212 ; infill
;WIDTH:0.127082
G1 X102.920 Y104.628 E0.00049 ; infill
;WIDTH:0.152761
G1 X102.971 Y104.676 E0.00064 ; infill
;WIDTH:0.185107
G1 X103.041 Y104.739 E0.00111 ; infill
;WIDTH:0.232749
G1 X103.276 Y105.004 E0.00559 ; infill
;WIDTH:0.257137
G1 X103.520 Y105.262 E0.00633 ; infill
;WIDTH:0.284419
G1 X103.797 Y105.473 E0.00698 ; infill
;LAYER_CHANGE
;Z:27
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;27
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.520 Y105.262 E-0.09172 ; wipe and retract
;WIPE_END
G1 E-2.30828 F2400.000 ; retract
G1 Z26.875 F10800.000 ; lift Z
G1 Z27.000 ; move to next layer (134)
;AFTER_LAYER_CHANGE
;27
G1 Z27.075 ; lift Z
G1 X115.097 Y104.984 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.151 Y104.999 E0.00259 ; perimeter
G1 X115.217 Y105.062 E0.00423 ; perimeter
G1 X115.236 Y105.239 E0.00824 ; perimeter
G1 X115.225 Y105.310 E0.00330 ; perimeter
G1 X115.038 Y105.615 E0.01658 ; perimeter
G1 X114.605 Y105.970 E0.02595 ; perimeter
G1 X114.269 Y106.155 E0.01776 ; perimeter
G1 X113.770 Y106.300 E0.02408 ; perimeter
G1 X113.612 Y106.309 E0.00733 ; perimeter
G1 X113.427 Y106.263 E0.00885 ; perimeter
G1 X113.410 Y106.133 E0.00608 ; perimeter
G1 X113.489 Y105.957 E0.00890 ; perimeter
G1 X113.652 Y105.734 E0.01282 ; perimeter
G1 X113.914 Y105.498 E0.01631 ; perimeter
G1 X114.260 Y105.276 E0.01906 ; perimeter
G1 X114.385 Y105.216 E0.00642 ; perimeter
G1 X115.039 Y104.979 E0.03220 ; perimeter
G1 X115.122 Y105.034 F10800.000 ; move inwards before travel
G1 X114.939 Y105.323 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.22437
G1 F2400.000
G1 X114.528 Y105.556 E0.00713 ; infill
;WIDTH:0.321862
G1 X114.155 Y105.789 E0.01021 ; infill
;WIDTH:0.311182
G1 X113.848 Y106.026 E0.00864 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.155 Y105.789 E-0.10225 ; wipe and retract
;WIPE_END
G1 E-2.29775 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X115.346 Y112.442 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X115.208 Y112.874 E0.01538 ; perimeter
G1 X115.310 Y114.039 E0.03959 ; perimeter
G1 X115.294 Y114.705 E0.02254 ; perimeter
G1 X115.268 Y114.802 E0.00340 ; perimeter
G1 X115.155 Y114.716 E0.00481 ; perimeter
G1 X114.798 Y114.269 E0.01937 ; perimeter
G1 X114.342 Y113.921 E0.01940 ; perimeter
G1 X113.959 Y113.474 E0.01992 ; perimeter
G1 X113.840 Y113.285 E0.00758 ; perimeter
G1 X113.996 Y113.124 E0.00757 ; perimeter
G1 X114.320 Y113.021 E0.01152 ; perimeter
G1 X114.351 Y112.994 E0.00138 ; perimeter
G1 X114.879 Y112.902 E0.01815 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.882 Y112.901 E0.00012 ; perimeter (bridge)
M107 ; disable fan
;TYPE:Perimeter
;WIDTH:0.45
;HEIGHT:0.2
G1 X114.930 Y112.893 E0.00164 ; perimeter
G1 X115.305 Y112.486 E0.01874 ; perimeter
G1 X115.209 Y111.787 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X115.442 Y111.668 E0.01211 ; perimeter
G1 X115.626 Y111.689 E0.00862 ; perimeter
G1 X115.731 Y111.744 E0.00547 ; perimeter
G1 X115.809 Y111.833 E0.00548 ; perimeter
G1 X115.884 Y112.097 E0.01273 ; perimeter
G1 X115.850 Y112.501 E0.01879 ; perimeter
G1 X115.792 Y112.625 E0.00636 ; perimeter
G1 X115.696 Y112.928 E0.01470 ; perimeter
G1 X115.793 Y114.024 E0.05097 ; perimeter
G1 X115.774 Y114.773 E0.03468 ; perimeter
G1 X115.690 Y115.063 E0.01403 ; perimeter
G1 X115.570 Y115.228 E0.00944 ; perimeter
G1 X115.413 Y115.301 E0.00802 ; perimeter
G1 X115.188 Y115.287 E0.01042 ; perimeter
G1 X115.027 Y115.227 E0.00795 ; perimeter
G1 X114.815 Y115.061 E0.01248 ; perimeter
G1 X114.458 Y114.616 E0.02641 ; perimeter
G1 X114.009 Y114.273 E0.02617 ; perimeter
G1 X113.570 Y113.761 E0.03125 ; perimeter
G1 X113.374 Y113.449 E0.01710 ; perimeter
G1 X113.352 Y113.173 E0.01279 ; perimeter
G1 X113.407 Y113.023 E0.00743 ; perimeter
G1 X113.563 Y112.887 E0.00956 ; perimeter
G1 X113.653 Y112.768 E0.00693 ; perimeter
G1 X113.795 Y112.682 E0.00770 ; perimeter
G1 X114.082 Y112.591 E0.01392 ; perimeter
G1 X114.139 Y112.542 E0.00347 ; perimeter
G1 X114.593 Y112.462 E0.02136 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.594 Y112.462 E0.00002 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.686 Y112.446 E0.00434 ; perimeter
G1 X115.114 Y111.982 E0.02927 ; perimeter
G1 X115.183 Y111.841 E0.00724 ; perimeter
G1 X115.446 Y111.896 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.442 Y111.668 E-0.08222 ; wipe and retract
G1 X115.626 Y111.689 E-0.04911 ; wipe and retract
G1 X115.731 Y111.744 E-0.03116 ; wipe and retract
G1 X115.809 Y111.833 E-0.03123 ; wipe and retract
G1 X115.884 Y112.097 E-0.07251 ; wipe and retract
G1 X115.850 Y112.501 E-0.10702 ; wipe and retract
G1 X115.792 Y112.625 E-0.03622 ; wipe and retract
G1 X115.696 Y112.928 E-0.08373 ; wipe and retract
G1 X115.793 Y114.024 E-0.29035 ; wipe and retract
G1 X115.774 Y114.773 E-0.19758 ; wipe and retract
G1 X115.690 Y115.063 E-0.07994 ; wipe and retract
G1 X115.570 Y115.228 E-0.05375 ; wipe and retract
G1 X115.413 Y115.301 E-0.04568 ; wipe and retract
G1 X115.188 Y115.287 E-0.05939 ; wipe and retract
G1 X115.027 Y115.227 E-0.04531 ; wipe and retract
G1 X114.815 Y115.061 E-0.07108 ; wipe and retract
G1 X114.458 Y114.616 E-0.15048 ; wipe and retract
G1 X114.009 Y114.273 E-0.14910 ; wipe and retract
G1 X113.570 Y113.761 E-0.17805 ; wipe and retract
G1 X113.374 Y113.449 E-0.09744 ; wipe and retract
G1 X113.352 Y113.173 E-0.07284 ; wipe and retract
G1 X113.407 Y113.023 E-0.04230 ; wipe and retract
G1 X113.563 Y112.887 E-0.05445 ; wipe and retract
G1 X113.653 Y112.768 E-0.03947 ; wipe and retract
G1 X113.795 Y112.682 E-0.04388 ; wipe and retract
G1 X114.082 Y112.591 E-0.07931 ; wipe and retract
G1 X114.139 Y112.542 E-0.01979 ; wipe and retract
G1 X114.201 Y112.531 E-0.01659 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X115.182 Y113.980 ; move to first infill (bridge) point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Bridge infill
;WIDTH:0.439324
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X114.227 Y113.178 E0.07856 ; infill (bridge)
M107 ; disable fan
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.182 Y113.980 E-0.32894 ; wipe and retract
;WIPE_END
G1 E-2.07106 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X107.871 Y109.124 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F1800.000
G1 X107.858 Y109.089 E0.00175 ; perimeter
G1 X108.061 Y108.999 E0.01026 ; perimeter
G1 X108.394 Y108.913 E0.01593 ; perimeter
G1 X108.496 Y108.914 E0.00474 ; perimeter
G1 X108.859 Y108.850 E0.01708 ; perimeter
G1 X109.205 Y108.856 E0.01601 ; perimeter
G1 X109.779 Y108.906 E0.02670 ; perimeter
G1 X110.140 Y108.993 E0.01721 ; perimeter
G1 X110.465 Y109.193 E0.01769 ; perimeter
G1 X110.504 Y109.259 E0.00353 ; perimeter
G1 X110.503 Y109.310 E0.00238 ; perimeter
G1 X110.440 Y109.391 E0.00470 ; perimeter
G1 X110.278 Y109.491 E0.00884 ; perimeter
G1 X109.982 Y109.593 E0.01451 ; perimeter
G1 X109.520 Y109.662 E0.02165 ; perimeter
G1 X108.922 Y109.651 E0.02769 ; perimeter
G1 X108.533 Y109.563 E0.01849 ; perimeter
G1 X108.179 Y109.446 E0.01727 ; perimeter
G1 X108.052 Y109.352 E0.00731 ; perimeter
G1 X107.909 Y109.171 E0.01068 ; perimeter
G1 X107.891 Y109.092 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.858 Y109.089 E-0.02549 ; wipe and retract
G1 X108.061 Y108.999 E-0.05847 ; wipe and retract
G1 X108.394 Y108.913 E-0.09077 ; wipe and retract
G1 X108.496 Y108.914 E-0.02701 ; wipe and retract
G1 X108.859 Y108.850 E-0.09728 ; wipe and retract
G1 X109.205 Y108.856 E-0.09118 ; wipe and retract
G1 X109.779 Y108.906 E-0.15209 ; wipe and retract
G1 X110.140 Y108.993 E-0.09807 ; wipe and retract
G1 X110.465 Y109.193 E-0.10075 ; wipe and retract
G1 X110.504 Y109.259 E-0.02010 ; wipe and retract
G1 X110.503 Y109.310 E-0.01354 ; wipe and retract
G1 X110.440 Y109.391 E-0.02680 ; wipe and retract
G1 X110.278 Y109.491 E-0.05038 ; wipe and retract
G1 X109.982 Y109.593 E-0.08264 ; wipe and retract
G1 X109.520 Y109.662 E-0.12336 ; wipe and retract
G1 X108.922 Y109.651 E-0.15777 ; wipe and retract
G1 X108.533 Y109.563 E-0.10532 ; wipe and retract
G1 X108.179 Y109.446 E-0.09838 ; wipe and retract
G1 X108.052 Y109.352 E-0.04164 ; wipe and retract
G1 X107.909 Y109.171 E-0.06081 ; wipe and retract
;WIPE_END
G1 E-0.87814 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X110.110 Y109.251 ; move to first infill point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.324933
G1 F2400.000
G1 X109.601 Y109.274 E0.01195 ; infill
G1 X108.970 Y109.252 E0.01481 ; infill
G1 X108.341 Y109.176 E0.01487 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.970 Y109.252 E-0.16733 ; wipe and retract
G1 X109.601 Y109.274 E-0.16663 ; wipe and retract
G1 X110.110 Y109.251 E-0.13445 ; wipe and retract
;WIPE_END
G1 E-1.93159 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X104.227 Y105.731 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.207 Y105.747 E0.00088 ; perimeter
G1 X104.057 Y105.570 E0.00784 ; perimeter
G1 X104.260 Y105.614 E0.00704 ; perimeter
G1 X104.244 Y105.673 E0.00207 ; perimeter
G1 X103.615 Y105.014 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.374 Y105.133 E0.03560 ; perimeter
G1 X104.567 Y105.186 E0.00927 ; perimeter
G1 X104.719 Y105.282 E0.00830 ; perimeter
G1 X104.800 Y105.455 E0.00887 ; perimeter
G1 X104.786 Y105.653 E0.00919 ; perimeter
G1 X104.713 Y105.786 E0.00706 ; perimeter
G1 X104.657 Y105.983 E0.00946 ; perimeter
G1 X104.550 Y106.091 E0.00708 ; perimeter
G1 X104.323 Y106.266 E0.01324 ; perimeter
G1 X104.215 Y106.285 E0.00512 ; perimeter
G1 X104.070 Y106.251 E0.00689 ; perimeter
G1 X103.894 Y106.124 E0.01005 ; perimeter
G1 X103.439 Y105.586 E0.03261 ; perimeter
G1 X103.073 Y105.094 E0.02840 ; perimeter
G1 X102.851 Y104.697 E0.02111 ; perimeter
G1 X102.753 Y104.459 E0.01189 ; perimeter
G1 X103.030 Y104.556 E0.01357 ; perimeter
G1 X103.070 Y104.608 E0.00307 ; perimeter
G1 X103.440 Y104.836 E0.02012 ; perimeter
G1 X103.573 Y104.971 E0.00879 ; perimeter
G1 X103.697 Y105.405 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.374 Y105.133 E-0.21570 ; wipe and retract
G1 X104.567 Y105.186 E-0.05281 ; wipe and retract
G1 X104.719 Y105.282 E-0.04726 ; wipe and retract
G1 X104.800 Y105.455 E-0.05055 ; wipe and retract
G1 X104.786 Y105.653 E-0.05234 ; wipe and retract
G1 X104.713 Y105.786 E-0.04021 ; wipe and retract
G1 X104.657 Y105.983 E-0.05388 ; wipe and retract
G1 X104.550 Y106.091 E-0.04031 ; wipe and retract
G1 X104.323 Y106.266 E-0.07543 ; wipe and retract
G1 X104.215 Y106.285 E-0.02915 ; wipe and retract
G1 X104.070 Y106.251 E-0.03922 ; wipe and retract
G1 X103.894 Y106.124 E-0.05725 ; wipe and retract
G1 X103.439 Y105.586 E-0.18577 ; wipe and retract
G1 X103.073 Y105.094 E-0.16181 ; wipe and retract
G1 X102.851 Y104.697 E-0.12026 ; wipe and retract
G1 X102.753 Y104.459 E-0.06772 ; wipe and retract
G1 X103.030 Y104.556 E-0.07732 ; wipe and retract
G1 X103.070 Y104.608 E-0.01749 ; wipe and retract
G1 X103.440 Y104.836 E-0.11460 ; wipe and retract
G1 X103.573 Y104.971 E-0.05008 ; wipe and retract
;WIPE_END
G1 E-0.85082 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X102.081 Y99.977 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X101.812 Y99.748 E0.01194 ; perimeter
G1 X101.996 Y99.787 E0.00636 ; perimeter
G1 X102.117 Y99.750 E0.00429 ; perimeter
G1 X102.090 Y99.917 E0.00574 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.812 Y99.748 E-0.08594 ; wipe and retract
G1 X101.996 Y99.787 E-0.04957 ; wipe and retract
G1 X102.117 Y99.750 E-0.03347 ; wipe and retract
G1 X102.090 Y99.917 E-0.04473 ; wipe and retract
;WIPE_END
G1 E-2.18630 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X102.525 Y103.910 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.600 Y104.126 E0.01059 ; perimeter
G1 X102.581 Y104.073 E0.00262 ; perimeter
G1 X102.430 Y103.898 E0.01070 ; perimeter
G1 X102.390 Y103.886 E0.00195 ; perimeter
G1 X102.132 Y103.521 E0.02067 ; perimeter
G1 X102.112 Y103.383 E0.00648 ; perimeter
G1 X102.080 Y103.309 E0.00372 ; perimeter
G1 X102.089 Y102.950 E0.01667 ; perimeter
G1 X102.227 Y102.403 E0.02611 ; perimeter
G1 X102.320 Y102.223 E0.00937 ; perimeter
G1 X102.404 Y101.813 E0.01938 ; perimeter
G1 X102.306 Y101.400 E0.01969 ; perimeter
G1 X101.986 Y100.530 E0.04294 ; perimeter
G1 X101.545 Y100.153 E0.02689 ; perimeter
G1 X101.446 Y100.102 E0.00514 ; perimeter
G1 X101.277 Y99.964 E0.01011 ; perimeter
G1 X101.178 Y99.935 E0.00481 ; perimeter
G1 X101.073 Y99.802 E0.00785 ; perimeter
G1 X100.964 Y99.567 E0.01198 ; perimeter
G1 X100.961 Y99.421 E0.00677 ; perimeter
G1 X100.997 Y99.246 E0.00827 ; perimeter
G1 X101.023 Y99.202 E0.00239 ; perimeter
G1 X101.120 Y99.150 E0.00506 ; perimeter
G1 X101.296 Y99.230 E0.00898 ; perimeter
G1 X101.573 Y99.204 E0.01290 ; perimeter
G1 X101.974 Y99.290 E0.01898 ; perimeter
G1 X102.131 Y99.241 E0.00764 ; perimeter
G1 X102.477 Y99.200 E0.01611 ; perimeter
G1 X102.679 Y99.216 E0.00941 ; perimeter
G1 X102.767 Y99.189 E0.00423 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X102.811 Y99.176 E0.00193 ; perimeter (bridge)
G1 X102.848 Y99.233 E0.00284 ; perimeter (bridge)
G1 X102.841 Y99.248 E0.00073 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X102.601 Y99.778 E0.02695 ; perimeter
G1 X102.541 Y100.149 E0.01736 ; perimeter
G1 X102.521 Y100.550 E0.01862 ; perimeter
G1 X102.858 Y101.626 E0.05223 ; perimeter
G1 X102.899 Y101.684 E0.00331 ; perimeter
G1 X103.108 Y102.208 E0.02613 ; perimeter
G1 X103.126 Y102.372 E0.00764 ; perimeter
G1 X103.103 Y102.417 E0.00236 ; perimeter
G1 X103.045 Y102.768 E0.01645 ; perimeter
G1 X102.821 Y103.092 E0.01827 ; perimeter
G1 X102.605 Y103.539 E0.02300 ; perimeter
G1 X102.621 Y103.653 E0.00534 ; perimeter
G1 X102.546 Y103.854 E0.00993 ; perimeter
G1 X102.347 Y104.053 F10800.000 ; move inwards before travel
G1 X102.332 Y103.285 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288802
G1 F2400.000
G1 X102.463 Y102.995 E0.00651 ; infill
;WIDTH:0.314517
G1 X102.500 Y102.893 E0.00245 ; infill
;WIDTH:0.354563
G1 X102.544 Y102.795 E0.00277 ; infill
;WIDTH:0.394611
G1 X102.587 Y102.698 E0.00312 ; infill
;WIDTH:0.402876
G1 X102.697 Y102.380 E0.01006 ; infill
;WIDTH:0.301926
G1 X102.714 Y102.305 E0.00165 ; infill
G1 X102.800 Y102.313 E0.00185 ; infill
;WIDTH:0.202322
G1 X102.878 Y102.322 E0.00105 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.800 Y102.313 E-0.02086 ; wipe and retract
;WIPE_END
G1 E-2.37914 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X104.331 Y97.317 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.323 Y97.265 E0.00178 ; perimeter
G1 X104.053 Y96.995 E0.01291 ; perimeter
G1 X103.911 Y96.781 E0.00868 ; perimeter
G1 X103.170 Y96.438 E0.02765 ; perimeter
G1 X103.490 Y96.329 E0.01145 ; perimeter
G1 X103.571 Y96.385 E0.00333 ; perimeter
G1 X104.564 Y96.169 E0.03439 ; perimeter
G1 X105.113 Y95.973 E0.01975 ; perimeter
G1 X105.282 Y95.977 E0.00572 ; perimeter
G1 X105.691 Y96.119 E0.01465 ; perimeter
G1 X106.099 Y96.332 E0.01557 ; perimeter
G1 X106.359 Y96.397 E0.00907 ; perimeter
G1 X106.761 Y96.603 E0.01531 ; perimeter
G1 X106.822 Y96.645 E0.00250 ; perimeter
G1 X106.893 Y96.841 E0.00705 ; perimeter
G1 X107.035 Y96.942 E0.00589 ; perimeter
G1 X106.834 Y96.927 E0.00681 ; perimeter
G1 X106.421 Y96.837 E0.01431 ; perimeter
G1 X104.387 Y97.295 E0.07059 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.323 Y97.265 E-0.01873 ; wipe and retract
G1 X104.053 Y96.995 E-0.10065 ; wipe and retract
G1 X103.911 Y96.781 E-0.06770 ; wipe and retract
G1 X103.170 Y96.438 E-0.21555 ; wipe and retract
G1 X103.490 Y96.329 E-0.08929 ; wipe and retract
G1 X103.571 Y96.385 E-0.02598 ; wipe and retract
G1 X104.564 Y96.169 E-0.26807 ; wipe and retract
G1 X105.113 Y95.973 E-0.15395 ; wipe and retract
G1 X105.282 Y95.977 E-0.04460 ; wipe and retract
G1 X105.691 Y96.119 E-0.11423 ; wipe and retract
G1 X106.099 Y96.332 E-0.12135 ; wipe and retract
G1 X106.359 Y96.397 E-0.07069 ; wipe and retract
G1 X106.761 Y96.603 E-0.11937 ; wipe and retract
G1 X106.822 Y96.645 E-0.01953 ; wipe and retract
G1 X106.893 Y96.841 E-0.05500 ; wipe and retract
G1 X107.035 Y96.942 E-0.04592 ; wipe and retract
G1 X106.834 Y96.927 E-0.05313 ; wipe and retract
G1 X106.421 Y96.837 E-0.11153 ; wipe and retract
G1 X104.387 Y97.295 E-0.55031 ; wipe and retract
;WIPE_END
G1 E-0.15442 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X107.295 Y96.536 ; move to first perimeter point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.562 Y96.726 E0.01517 ; perimeter
G1 X107.599 Y96.786 E0.00325 ; perimeter
G1 X108.081 Y97.072 E0.02596 ; perimeter
G1 X108.651 Y97.332 E0.02903 ; perimeter
G1 X108.800 Y97.361 E0.00706 ; perimeter
G1 X109.149 Y97.526 E0.01787 ; perimeter
G1 X109.332 Y97.656 E0.01040 ; perimeter
G1 X109.543 Y97.890 E0.01458 ; perimeter
G1 X109.577 Y98.080 E0.00896 ; perimeter
G1 X109.683 Y98.202 E0.00748 ; perimeter
G1 X109.759 Y98.400 E0.00980 ; perimeter
G1 X110.150 Y98.882 E0.02875 ; perimeter
G1 X110.495 Y99.408 E0.02915 ; perimeter
G1 X110.819 Y99.977 E0.03035 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.963 Y100.116 E0.00835 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.195 Y100.341 E0.01498 ; perimeter
G1 X111.302 Y100.338 E0.00496 ; perimeter
G1 X111.472 Y100.423 E0.00880 ; perimeter
G1 X111.657 Y100.429 E0.00858 ; perimeter
G1 X111.913 Y100.497 E0.01228 ; perimeter
G1 X112.224 Y100.625 E0.01557 ; perimeter
G1 X112.477 Y100.762 E0.01333 ; perimeter
G1 X112.812 Y101.020 E0.01961 ; perimeter
G1 X112.919 Y101.137 E0.00732 ; perimeter
G1 X113.048 Y101.353 E0.01167 ; perimeter
G1 X113.050 Y101.460 E0.00497 ; perimeter
G1 X112.813 Y101.538 E0.01155 ; perimeter
G1 X112.634 Y101.549 E0.00831 ; perimeter
G1 X112.310 Y101.483 E0.01533 ; perimeter
G1 X111.926 Y101.335 E0.01907 ; perimeter
G1 X111.627 Y101.194 E0.01532 ; perimeter
G1 X111.338 Y100.982 E0.01658 ; perimeter
G1 X111.232 Y100.944 E0.00523 ; perimeter
G1 X110.974 Y100.699 E0.01647 ; perimeter
G1 X110.932 Y100.688 E0.00200 ; perimeter
G1 X110.771 Y100.513 E0.01102 ; perimeter
G1 X110.727 Y100.500 E0.00214 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X110.613 Y100.466 E0.00496 ; perimeter (bridge)
G1 X110.444 Y100.254 E0.01131 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X110.202 Y99.950 E0.01802 ; perimeter
G1 X109.791 Y99.583 E0.02553 ; perimeter
G1 X109.104 Y98.794 E0.04842 ; perimeter
G1 X108.998 Y98.648 E0.00840 ; perimeter
G1 X108.523 Y98.137 E0.03228 ; perimeter
G1 X107.965 Y97.818 E0.02979 ; perimeter
G1 X107.097 Y97.431 E0.04401 ; perimeter
G1 X106.764 Y97.405 E0.01549 ; perimeter
G1 X106.422 Y97.331 E0.01620 ; perimeter
G1 X104.564 Y97.744 E0.08816 ; perimeter
G1 X104.080 Y97.927 E0.02401 ; perimeter
G1 X104.021 Y97.932 E0.00274 ; perimeter
G1 X104.053 Y97.830 E0.00495 ; perimeter
G1 X103.886 Y97.597 E0.01330 ; perimeter
G1 X103.870 Y97.493 E0.00486 ; perimeter
G1 X103.678 Y97.302 E0.01257 ; perimeter
G1 X103.585 Y97.161 E0.00779 ; perimeter
G1 X103.057 Y96.917 E0.02695 ; perimeter
G1 X102.833 Y96.928 E0.01039 ; perimeter
G1 X102.715 Y96.890 E0.00574 ; perimeter
G1 X102.415 Y96.843 E0.01407 ; perimeter
G1 X102.148 Y96.859 E0.01239 ; perimeter
G1 X102.108 Y96.807 E0.00304 ; perimeter
G1 X102.134 Y96.700 E0.00508 ; perimeter
G1 X102.310 Y96.451 E0.01414 ; perimeter
G1 X102.606 Y96.172 E0.01885 ; perimeter
G1 X102.831 Y96.018 E0.01260 ; perimeter
G1 X103.041 Y95.973 E0.00998 ; perimeter
G1 X103.564 Y95.794 E0.02560 ; perimeter
G1 X103.673 Y95.869 E0.00612 ; perimeter
G1 X104.431 Y95.704 E0.03593 ; perimeter
G1 X105.036 Y95.488 E0.02976 ; perimeter
G1 X105.370 Y95.497 E0.01546 ; perimeter
G1 X105.882 Y95.676 E0.02514 ; perimeter
G1 X106.271 Y95.878 E0.02029 ; perimeter
G1 X106.529 Y95.942 E0.01232 ; perimeter
G1 X107.011 Y96.189 E0.02506 ; perimeter
G1 X107.208 Y96.327 E0.01113 ; perimeter
G1 X107.275 Y96.479 E0.00772 ; perimeter
G1 X107.235 Y96.858 F10800.000 ; move inwards before travel
G1 X107.251 Y97.053 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.288058
G1 F2400.000
G1 X108.135 Y97.496 E0.02016 ; infill
;WIDTH:0.334187
G1 X108.548 Y97.706 E0.01122 ; infill
;WIDTH:0.37684
G1 X108.672 Y97.752 E0.00366 ; infill
;WIDTH:0.384622
G1 X108.760 Y97.798 E0.00282 ; infill
;WIDTH:0.396811
G1 X108.805 Y97.826 E0.00155 ; infill
;WIDTH:0.424594
G1 X108.864 Y97.869 E0.00233 ; infill
;WIDTH:0.452376
G1 X108.923 Y97.912 E0.00250 ; infill
;WIDTH:0.47
G1 X109.688 Y98.695 E0.03886 ; infill
G1 X108.763 Y97.610 F10800.000 ; move to first infill point
;WIDTH:0.372694
G1 F2400.000
G1 X109.226 Y98.296 E0.02270 ; infill
G1 X109.330 Y98.414 E0.00430 ; infill
G1 X109.406 Y98.554 E0.00436 ; infill
;WIDTH:0.251595
G1 X110.135 Y99.453 E0.02008 ; infill
;WIDTH:0.135372
G1 X110.391 Y99.766 E0.00311 ; infill
G1 X111.281 Y100.607 F10800.000 ; move to first infill point
;WIDTH:0.27088
G1 F2400.000
G1 X111.537 Y100.729 E0.00538 ; infill
;WIDTH:0.299986
G1 X112.275 Y101.073 E0.01740 ; infill
G1 X112.687 Y101.304 E0.01010 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.275 Y101.073 E-0.12473 ; wipe and retract
G1 X111.537 Y100.729 E-0.21486 ; wipe and retract
;WIPE_END
G1 E-2.06041 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X106.334 Y96.648 ; move to first infill point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.105786
G1 F2400.000
G1 X106.216 Y96.595 E0.00068 ; infill
G1 X105.628 Y96.888 F10800.000 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.485183
G1 F3600.000
G1 X105.057 Y96.317 E0.02971 ; infill
G1 X104.590 Y96.476 E0.01813 ; infill
G1 X105.116 Y97.002 E0.02738 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.590 Y96.476 E-0.19649 ; wipe and retract
G1 X105.057 Y96.317 E-0.13013 ; wipe and retract
G1 X105.628 Y96.888 E-0.21321 ; wipe and retract
;WIPE_END
G1 E-1.86018 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 X103.001 Y96.678 ; move to first infill point
G1 Z27.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.16593
G1 F2400.000
G1 X102.576 Y96.531 E0.00460 ; infill
;LAYER_CHANGE
;Z:27.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;27.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.001 Y96.678 E-0.11859 ; wipe and retract
;WIPE_END
G1 E-2.28141 F2400.000 ; retract
G1 Z27.075 F10800.000 ; lift Z
G1 Z27.200 ; move to next layer (135)
;AFTER_LAYER_CHANGE
;27.2
G1 Z27.275 ; lift Z
G1 X113.970 Y113.192 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.100 Y113.020 E0.00732 ; perimeter
G1 X114.149 Y112.998 E0.00181 ; perimeter
G1 X114.446 Y112.746 E0.01320 ; perimeter
G1 X115.087 Y112.515 E0.02306 ; perimeter
G1 X115.265 Y112.335 E0.00857 ; perimeter
G1 X115.323 Y112.331 E0.00197 ; perimeter
G1 X115.399 Y112.292 E0.00287 ; perimeter
G1 X115.382 Y112.590 E0.01010 ; perimeter
G1 X115.325 Y112.741 E0.00546 ; perimeter
G1 X115.356 Y113.238 E0.01685 ; perimeter
G1 X115.325 Y114.138 E0.03047 ; perimeter
G1 X115.278 Y114.581 E0.01509 ; perimeter
G1 X115.135 Y114.336 E0.00960 ; perimeter
G1 X114.736 Y113.922 E0.01947 ; perimeter
G1 X114.453 Y113.735 E0.01149 ; perimeter
G1 X114.282 Y113.676 E0.00613 ; perimeter
G1 X114.124 Y113.537 E0.00710 ; perimeter
G1 X113.947 Y113.306 E0.00986 ; perimeter
G1 X113.955 Y113.250 E0.00188 ; perimeter
G1 X113.488 Y113.128 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.524 Y112.991 E0.00654 ; perimeter
G1 X113.658 Y112.792 E0.01113 ; perimeter
G1 X113.809 Y112.622 E0.01049 ; perimeter
G1 X113.889 Y112.586 E0.00410 ; perimeter
G1 X114.219 Y112.306 E0.02004 ; perimeter
G1 X114.821 Y112.099 E0.02950 ; perimeter
G1 X115.041 Y111.876 E0.01450 ; perimeter
G1 X115.191 Y111.857 E0.00700 ; perimeter
G1 X115.423 Y111.739 E0.01204 ; perimeter
G1 X115.556 Y111.756 E0.00622 ; perimeter
G1 X115.727 Y111.825 E0.00856 ; perimeter
G1 X115.795 Y111.902 E0.00476 ; perimeter
G1 X115.889 Y112.262 E0.01721 ; perimeter
G1 X115.858 Y112.695 E0.02012 ; perimeter
G1 X115.813 Y112.815 E0.00595 ; perimeter
G1 X115.839 Y113.231 E0.01929 ; perimeter
G1 X115.806 Y114.169 E0.04349 ; perimeter
G1 X115.762 Y114.647 E0.02224 ; perimeter
G1 X115.666 Y114.967 E0.01546 ; perimeter
G1 X115.534 Y115.159 E0.01078 ; perimeter
G1 X115.472 Y115.200 E0.00347 ; perimeter
G1 X115.411 Y115.210 E0.00286 ; perimeter
G1 X115.201 Y115.202 E0.00973 ; perimeter
G1 X115.038 Y115.069 E0.00975 ; perimeter
G1 X114.935 Y114.950 E0.00730 ; perimeter
G1 X114.748 Y114.629 E0.01720 ; perimeter
G1 X114.426 Y114.295 E0.02151 ; perimeter
G1 X114.238 Y114.171 E0.01042 ; perimeter
G1 X114.035 Y114.101 E0.00995 ; perimeter
G1 X113.770 Y113.868 E0.01636 ; perimeter
G1 X113.496 Y113.509 E0.02088 ; perimeter
G1 X113.456 Y113.308 E0.00952 ; perimeter
G1 X113.473 Y113.186 E0.00570 ; perimeter
G1 X113.620 Y113.078 F10800.000 ; move inwards before travel
G1 X114.592 Y113.681 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.516812
G1 F3600.000
G1 X115.049 Y113.224 E0.02545 ; infill
G1 X115.027 Y112.861 E0.01431 ; infill
G1 X114.602 Y113.014 E0.01781 ; infill
G1 X114.187 Y113.416 E0.02275 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.602 Y113.014 E-0.15234 ; wipe and retract
G1 X115.027 Y112.861 E-0.11926 ; wipe and retract
G1 X115.049 Y113.224 E-0.09583 ; wipe and retract
G1 X114.592 Y113.681 E-0.17046 ; wipe and retract
;WIPE_END
G1 E-1.86210 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X108.377 Y109.280 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.383 Y109.184 E0.00446 ; perimeter
G1 X108.800 Y108.943 E0.02232 ; perimeter
G1 X109.184 Y108.873 E0.01806 ; perimeter
G1 X109.450 Y108.865 E0.01234 ; perimeter
G1 X110.197 Y108.907 E0.03464 ; perimeter
G1 X110.541 Y109.000 E0.01649 ; perimeter
G1 X110.838 Y109.150 E0.01544 ; perimeter
G1 X110.909 Y109.276 E0.00668 ; perimeter
G1 X110.760 Y109.454 E0.01075 ; perimeter
G1 X110.656 Y109.517 E0.00566 ; perimeter
G1 X110.185 Y109.649 E0.02263 ; perimeter
G1 X109.746 Y109.677 E0.02037 ; perimeter
G1 X109.242 Y109.657 E0.02340 ; perimeter
G1 X108.825 Y109.549 E0.01994 ; perimeter
G1 X108.529 Y109.426 E0.01484 ; perimeter
G1 X108.418 Y109.324 E0.00698 ; perimeter
G1 X108.442 Y109.210 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.383 Y109.184 E-0.03807 ; wipe and retract
G1 X108.800 Y108.943 E-0.12717 ; wipe and retract
G1 X109.184 Y108.873 E-0.10290 ; wipe and retract
G1 X109.450 Y108.865 E-0.07032 ; wipe and retract
G1 X110.197 Y108.907 E-0.19735 ; wipe and retract
G1 X110.541 Y109.000 E-0.09394 ; wipe and retract
G1 X110.838 Y109.150 E-0.08799 ; wipe and retract
G1 X110.909 Y109.276 E-0.03807 ; wipe and retract
G1 X110.760 Y109.454 E-0.06125 ; wipe and retract
G1 X110.656 Y109.517 E-0.03226 ; wipe and retract
G1 X110.185 Y109.649 E-0.12893 ; wipe and retract
G1 X109.746 Y109.677 E-0.11605 ; wipe and retract
G1 X109.242 Y109.657 E-0.13332 ; wipe and retract
G1 X108.825 Y109.549 E-0.11362 ; wipe and retract
G1 X108.529 Y109.426 E-0.08453 ; wipe and retract
G1 X108.418 Y109.324 E-0.03978 ; wipe and retract
;WIPE_END
G1 E-0.93447 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X110.496 Y109.314 ; move to first infill point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.306749
G1 F2400.000
G1 X110.139 Y109.278 E0.00787 ; infill
G1 X109.299 Y109.264 E0.01843 ; infill
G1 X108.808 Y109.210 E0.01084 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.299 Y109.264 E-0.13037 ; wipe and retract
G1 X110.139 Y109.278 E-0.22173 ; wipe and retract
G1 X110.496 Y109.314 E-0.09468 ; wipe and retract
;WIPE_END
G1 E-1.95322 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X114.932 Y105.254 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.976 Y105.330 E0.00405 ; perimeter
G1 X114.957 Y105.458 E0.00602 ; perimeter
G1 X114.820 Y105.713 E0.01337 ; perimeter
G1 X114.672 Y105.873 E0.01010 ; perimeter
G1 X114.381 Y106.102 E0.01716 ; perimeter
G1 X113.986 Y106.321 E0.02090 ; perimeter
G1 X113.835 Y106.374 E0.00742 ; perimeter
G1 X113.440 Y106.473 E0.01887 ; perimeter
G1 X113.293 Y106.486 E0.00681 ; perimeter
G1 X113.132 Y106.446 E0.00771 ; perimeter
G1 X113.104 Y106.404 E0.00234 ; perimeter
G1 X113.106 Y106.330 E0.00342 ; perimeter
G1 X113.181 Y106.133 E0.00980 ; perimeter
G1 X113.422 Y105.844 E0.01742 ; perimeter
G1 X113.775 Y105.560 E0.02095 ; perimeter
G1 X114.115 Y105.387 E0.01768 ; perimeter
G1 X114.409 Y105.279 E0.01453 ; perimeter
G1 X114.698 Y105.225 E0.01359 ; perimeter
G1 X114.872 Y105.249 E0.00817 ; perimeter
G1 X114.918 Y105.340 F10800.000 ; move inwards before travel
G1 X113.460 Y106.192 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.266074
G1 F2400.000
G1 X114.658 Y105.505 E0.02563 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.460 Y106.192 E-0.36452 ; wipe and retract
;WIPE_END
G1 E-2.03548 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X104.373 Y105.526 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.268 Y105.630 E0.00500 ; perimeter
G1 X104.211 Y105.573 E0.00273 ; perimeter
G1 X104.315 Y105.542 E0.00368 ; perimeter
G1 X103.725 Y105.249 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.883 Y105.121 E0.00943 ; perimeter
G1 X103.986 Y105.138 E0.00484 ; perimeter
G1 X104.250 Y105.057 E0.01276 ; perimeter
G1 X104.607 Y105.001 E0.01674 ; perimeter
G1 X104.843 Y105.057 E0.01127 ; perimeter
G1 X104.954 Y105.139 E0.00637 ; perimeter
G1 X104.990 Y105.254 E0.00555 ; perimeter
G1 X104.946 Y105.513 E0.01221 ; perimeter
G1 X104.794 Y105.785 E0.01440 ; perimeter
G1 X104.565 Y106.019 E0.01520 ; perimeter
G1 X104.357 Y106.128 E0.01085 ; perimeter
G1 X104.245 Y106.144 E0.00524 ; perimeter
G1 X104.061 Y106.094 E0.00883 ; perimeter
G1 X103.881 Y105.929 E0.01133 ; perimeter
G1 X103.733 Y105.755 E0.01058 ; perimeter
G1 X103.529 Y105.413 E0.01845 ; perimeter
G1 X103.512 Y105.304 E0.00508 ; perimeter
G1 X103.454 Y105.158 E0.00728 ; perimeter
G1 X103.668 Y105.230 E0.01045 ; perimeter
G1 X103.903 Y105.348 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.883 Y105.121 E-0.06362 ; wipe and retract
G1 X103.986 Y105.138 E-0.02759 ; wipe and retract
G1 X104.250 Y105.057 E-0.07271 ; wipe and retract
G1 X104.607 Y105.001 E-0.09539 ; wipe and retract
G1 X104.843 Y105.057 E-0.06419 ; wipe and retract
G1 X104.954 Y105.139 E-0.03631 ; wipe and retract
G1 X104.990 Y105.254 E-0.03160 ; wipe and retract
G1 X104.946 Y105.513 E-0.06957 ; wipe and retract
G1 X104.794 Y105.785 E-0.08203 ; wipe and retract
G1 X104.565 Y106.019 E-0.08657 ; wipe and retract
G1 X104.357 Y106.128 E-0.06180 ; wipe and retract
G1 X104.245 Y106.144 E-0.02988 ; wipe and retract
G1 X104.061 Y106.094 E-0.05031 ; wipe and retract
G1 X103.881 Y105.929 E-0.06455 ; wipe and retract
G1 X103.733 Y105.755 E-0.06027 ; wipe and retract
G1 X103.529 Y105.413 E-0.10512 ; wipe and retract
G1 X103.512 Y105.304 E-0.02892 ; wipe and retract
G1 X103.454 Y105.158 E-0.04148 ; wipe and retract
G1 X103.668 Y105.230 E-0.05950 ; wipe and retract
;WIPE_END
G1 E-1.26858 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X102.746 Y102.399 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.741 Y102.157 E0.00817 ; perimeter
G1 X102.761 Y102.034 E0.00421 ; perimeter
G1 X102.897 Y102.219 E0.00778 ; perimeter
G1 X102.798 Y102.369 E0.00609 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.741 Y102.157 E-0.05776 ; wipe and retract
G1 X102.761 Y102.034 E-0.03282 ; wipe and retract
G1 X102.897 Y102.219 E-0.06062 ; wipe and retract
G1 X102.798 Y102.369 E-0.04744 ; wipe and retract
;WIPE_END
G1 E-2.20136 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X102.171 Y100.186 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X101.968 Y99.894 E0.01203 ; perimeter
G1 X101.864 Y99.795 E0.00487 ; perimeter
G1 X102.278 Y99.666 E0.01467 ; perimeter
G1 X102.181 Y99.869 E0.00762 ; perimeter
G1 X102.173 Y100.126 E0.00870 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X101.968 Y99.894 E-0.08161 ; wipe and retract
G1 X101.864 Y99.795 E-0.03794 ; wipe and retract
G1 X102.278 Y99.666 E-0.11437 ; wipe and retract
G1 X102.181 Y99.869 E-0.05943 ; wipe and retract
G1 X102.173 Y100.126 E-0.06780 ; wipe and retract
;WIPE_END
G1 E-2.03885 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X104.220 Y97.540 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.185 Y97.277 E0.00897 ; perimeter
G1 X103.854 Y96.779 E0.02025 ; perimeter
G1 X103.761 Y96.717 E0.00377 ; perimeter
G1 X103.987 Y96.712 E0.00764 ; perimeter
G1 X104.613 Y96.537 E0.02202 ; perimeter
G1 X105.293 Y96.266 E0.02476 ; perimeter
G1 X105.536 Y96.265 E0.00824 ; perimeter
G1 X105.962 Y96.448 E0.01569 ; perimeter
G1 X106.092 Y96.539 E0.00537 ; perimeter
G1 X106.262 Y96.584 E0.00594 ; perimeter
G1 X106.756 Y96.837 E0.01879 ; perimeter
G1 X106.242 Y96.857 E0.01740 ; perimeter
G1 X105.906 Y96.974 E0.01206 ; perimeter
G1 X105.626 Y97.033 E0.00969 ; perimeter
G1 X104.613 Y97.325 E0.03568 ; perimeter
G1 X104.272 Y97.511 E0.01315 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.185 Y97.277 E-0.06587 ; wipe and retract
G1 X103.854 Y96.779 E-0.15790 ; wipe and retract
G1 X103.761 Y96.717 E-0.02935 ; wipe and retract
G1 X103.987 Y96.712 E-0.05957 ; wipe and retract
G1 X104.613 Y96.537 E-0.17164 ; wipe and retract
G1 X105.293 Y96.266 E-0.19302 ; wipe and retract
G1 X105.536 Y96.265 E-0.06426 ; wipe and retract
G1 X105.962 Y96.448 E-0.12233 ; wipe and retract
G1 X106.092 Y96.539 E-0.04188 ; wipe and retract
G1 X106.262 Y96.584 E-0.04633 ; wipe and retract
G1 X106.756 Y96.837 E-0.14647 ; wipe and retract
G1 X106.242 Y96.857 E-0.13563 ; wipe and retract
G1 X105.906 Y96.974 E-0.09399 ; wipe and retract
G1 X105.626 Y97.033 E-0.07554 ; wipe and retract
G1 X104.613 Y97.325 E-0.27816 ; wipe and retract
G1 X104.272 Y97.511 E-0.10254 ; wipe and retract
;WIPE_END
G1 E-0.61550 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X110.634 Y100.314 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.687 Y100.357 E0.00231 ; perimeter
G1 X110.665 Y100.353 E0.00076 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.687 Y100.357 E-0.00595 ; wipe and retract
G1 X110.665 Y100.353 E-0.00595 ; wipe and retract
;WIPE_END
G1 E-2.38810 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X112.611 Y101.366 ; move to first perimeter point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X112.367 Y101.391 E0.01132 ; perimeter
G1 X112.249 Y101.381 E0.00552 ; perimeter
G1 X111.842 Y101.272 E0.01951 ; perimeter
G1 X111.493 Y101.136 E0.01735 ; perimeter
G1 X111.430 Y101.090 E0.00361 ; perimeter
G1 X110.915 Y100.903 E0.02540 ; perimeter
G1 X110.189 Y100.720 E0.03466 ; perimeter
G1 X110.158 Y100.402 E0.01476 ; perimeter
G1 X110.041 Y100.041 E0.01761 ; perimeter
G1 X109.810 Y99.664 E0.02048 ; perimeter
G1 X109.016 Y98.644 E0.05988 ; perimeter
G1 X108.829 Y98.353 E0.01600 ; perimeter
G1 X108.493 Y98.024 E0.02179 ; perimeter
G1 X107.919 Y97.717 E0.03015 ; perimeter
G1 X107.027 Y97.342 E0.04482 ; perimeter
G1 X106.686 Y97.316 E0.01586 ; perimeter
G1 X106.337 Y97.334 E0.01620 ; perimeter
G1 X106.035 Y97.439 E0.01478 ; perimeter
G1 X105.742 Y97.501 E0.01387 ; perimeter
G1 X104.798 Y97.774 E0.04554 ; perimeter
G1 X104.361 Y98.012 E0.02305 ; perimeter
G1 X103.942 Y98.316 E0.02399 ; perimeter
G1 X103.809 Y98.472 E0.00948 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.737 Y98.557 E0.00466 ; perimeter (bridge)
G1 X103.688 Y98.567 E0.00206 ; perimeter (bridge)
G1 X103.353 Y99.028 E0.02385 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.241 Y99.182 E0.00879 ; perimeter
G1 X102.990 Y99.436 E0.01653 ; perimeter
G1 X102.897 Y99.488 E0.00496 ; perimeter
G1 X102.659 Y99.985 E0.02552 ; perimeter
G1 X102.651 Y100.244 E0.01198 ; perimeter
G1 X102.604 Y100.477 E0.01106 ; perimeter
G1 X102.826 Y101.081 E0.02980 ; perimeter
G1 X102.911 Y101.413 E0.01589 ; perimeter
G1 X103.205 Y101.828 E0.02352 ; perimeter
G1 X103.245 Y101.845 E0.00202 ; perimeter
G1 X103.413 Y102.071 E0.01306 ; perimeter
G1 X103.406 Y102.300 E0.01058 ; perimeter
G1 X103.224 Y102.619 E0.01700 ; perimeter
G1 X103.100 Y102.751 E0.00842 ; perimeter
G1 X102.995 Y102.811 E0.00560 ; perimeter
G1 X102.755 Y103.093 E0.01716 ; perimeter
G1 X102.693 Y103.205 E0.00592 ; perimeter
G1 X102.598 Y103.261 E0.00514 ; perimeter
G1 X102.463 Y103.411 E0.00932 ; perimeter
G1 X102.383 Y103.409 E0.00371 ; perimeter
G1 X102.279 Y103.339 E0.00578 ; perimeter
G1 X102.182 Y103.106 E0.01169 ; perimeter
G1 X102.172 Y102.742 E0.01691 ; perimeter
G1 X102.268 Y102.325 E0.01982 ; perimeter
G1 X102.257 Y102.133 E0.00887 ; perimeter
G1 X102.311 Y101.790 E0.01610 ; perimeter
G1 X101.904 Y100.593 E0.05858 ; perimeter
G1 X101.804 Y100.505 E0.00613 ; perimeter
G1 X101.599 Y100.209 E0.01669 ; perimeter
G1 X101.388 Y100.007 E0.01356 ; perimeter
G1 X101.245 Y99.815 E0.01107 ; perimeter
G1 X101.184 Y99.684 E0.00670 ; perimeter
G1 X101.173 Y99.512 E0.00800 ; perimeter
G1 X101.229 Y99.380 E0.00665 ; perimeter
G1 X101.368 Y99.299 E0.00742 ; perimeter
G1 X101.665 Y99.259 E0.01392 ; perimeter
G1 X101.842 Y99.297 E0.00838 ; perimeter
G1 X102.216 Y99.180 E0.01814 ; perimeter
G1 X102.663 Y98.987 E0.02255 ; perimeter
G1 X103.108 Y98.718 E0.02411 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.316 Y98.592 E0.01015 ; perimeter (bridge)
G1 X103.534 Y98.355 E0.01349 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.672 Y98.244 E0.00819 ; perimeter
G1 X103.768 Y97.810 E0.02058 ; perimeter
G1 X103.722 Y97.451 E0.01676 ; perimeter
G1 X103.505 Y97.126 E0.01811 ; perimeter
G1 X103.335 Y97.011 E0.00953 ; perimeter
G1 X103.268 Y96.897 E0.00610 ; perimeter
G1 X102.873 Y96.782 E0.01905 ; perimeter
G1 X102.590 Y96.643 E0.01461 ; perimeter
G1 X102.572 Y96.596 E0.00232 ; perimeter
G1 X102.635 Y96.445 E0.00760 ; perimeter
G1 X102.916 Y96.254 E0.01576 ; perimeter
G1 X103.343 Y96.189 E0.01999 ; perimeter
G1 X103.699 Y96.236 E0.01662 ; perimeter
G1 X103.915 Y96.231 E0.01005 ; perimeter
G1 X104.463 Y96.078 E0.02636 ; perimeter
G1 X105.219 Y95.784 E0.03754 ; perimeter
G1 X105.635 Y95.783 E0.01929 ; perimeter
G1 X106.198 Y96.025 E0.02837 ; perimeter
G1 X106.299 Y96.095 E0.00570 ; perimeter
G1 X106.430 Y96.130 E0.00631 ; perimeter
G1 X106.943 Y96.377 E0.02637 ; perimeter
G1 X107.820 Y97.015 E0.05021 ; perimeter
G1 X108.816 Y97.529 E0.05193 ; perimeter
G1 X109.271 Y97.844 E0.02562 ; perimeter
G1 X109.487 Y98.056 E0.01404 ; perimeter
G1 X109.497 Y98.112 E0.00265 ; perimeter
G1 X109.890 Y98.539 E0.02687 ; perimeter
G1 X110.410 Y99.163 E0.03763 ; perimeter
G1 X110.770 Y99.653 E0.02815 ; perimeter
G1 X110.935 Y99.937 E0.01524 ; perimeter
G1 X111.144 Y100.111 E0.01254 ; perimeter
G1 X111.333 Y100.194 E0.00959 ; perimeter
G1 X111.429 Y100.268 E0.00559 ; perimeter
G1 X111.684 Y100.398 E0.01328 ; perimeter
G1 X111.841 Y100.444 E0.00759 ; perimeter
G1 X112.102 Y100.579 E0.01360 ; perimeter
G1 X112.506 Y100.882 E0.02337 ; perimeter
G1 X112.722 Y101.202 E0.01787 ; perimeter
G1 X112.723 Y101.281 E0.00368 ; perimeter
G1 X112.666 Y101.343 E0.00389 ; perimeter
G1 X112.417 Y101.217 F10800.000 ; move inwards before travel
G1 X112.376 Y101.150 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.149228
G1 F2400.000
G1 X112.178 Y101.033 E0.00203 ; infill
;WIDTH:0.242824
G1 X111.537 Y100.736 E0.01175 ; infill
;WIDTH:0.338669
G1 X111.062 Y100.521 E0.01283 ; infill
G1 X110.824 Y100.625 E0.00638 ; infill
G1 X110.351 Y100.137 F10800.000 ; move to first infill point
;WIDTH:0.138524
G1 F2400.000
G1 X110.101 Y99.169 E0.00795 ; infill
G1 X110.251 Y99.621 F10800.000 ; move to first infill point
;WIDTH:0.359181
G1 F2400.000
G1 X110.136 Y99.449 E0.00546 ; infill
;WIDTH:0.341724
G1 X109.606 Y98.788 E0.02104 ; infill
;WIDTH:0.315393
G1 X109.309 Y98.436 E0.01044 ; infill
;WIDTH:0.277435
G1 X109.198 Y98.293 E0.00354 ; infill
;WIDTH:0.252752
G1 X109.098 Y98.148 E0.00307 ; infill
;WIDTH:0.235689
G1 X108.865 Y97.947 E0.00493 ; infill
;WIDTH:0.191454
G1 X108.675 Y97.789 E0.00305 ; infill
;WIDTH:0.14974
G1 X108.046 Y97.457 E0.00632 ; infill
;WIDTH:0.138571
G1 X107.482 Y97.176 E0.00501 ; infill
;WIDTH:0.264432
G1 X107.112 Y96.969 E0.00781 ; infill
G1 X106.923 Y97.082 E0.00406 ; infill
G1 X105.982 Y96.732 F10800.000 ; move to first infill point
;WIDTH:0.20776
G1 F2400.000
G1 X105.609 Y96.656 E0.00522 ; infill
G1 X105.127 Y96.766 F10800.000 ; move to first infill point
;WIDTH:0.4113
G1 F2400.000
G1 X104.738 Y96.895 E0.01253 ; infill
;WIDTH:0.393717
G1 X104.278 Y97.049 E0.01417 ; infill
G1 X103.501 Y96.749 F10800.000 ; move to first infill point
;WIDTH:0.180832
G1 F2400.000
G1 X103.440 Y96.587 E0.00198 ; infill
;WIDTH:0.285884
G1 X103.428 Y96.566 E0.00050 ; infill
G1 X103.027 Y96.481 E0.00827 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.428 Y96.566 E-0.10807 ; wipe and retract
G1 X103.440 Y96.587 E-0.00649 ; wipe and retract
;WIPE_END
G1 E-2.28544 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 X102.352 Y100.816 ; move to first infill point
G1 Z27.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.276255
G1 F2400.000
G1 X102.530 Y101.341 E0.01075 ; infill
G1 X102.738 Y102.707 F10800.000 ; move to first infill point
;WIDTH:0.145798
G1 F2400.000
G1 X102.494 Y102.910 E0.00272 ; infill
G1 X102.450 Y103.069 E0.00141 ; infill
;LAYER_CHANGE
;Z:27.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;27.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.494 Y102.910 E-0.04363 ; wipe and retract
G1 X102.738 Y102.707 E-0.08376 ; wipe and retract
;WIPE_END
G1 E-2.27261 F2400.000 ; retract
G1 Z27.275 F10800.000 ; lift Z
G1 Z27.400 ; move to next layer (136)
;AFTER_LAYER_CHANGE
;27.4
G1 Z27.475 ; lift Z
G1 X103.888 Y105.545 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.007 Y105.247 E0.01485 ; perimeter
G1 X104.632 Y104.654 E0.03992 ; perimeter
G1 X104.585 Y104.488 E0.00798 ; perimeter
G1 X104.762 Y104.677 E0.01198 ; perimeter
G1 X105.349 Y105.115 E0.03392 ; perimeter
G1 X105.423 Y105.114 E0.00342 ; perimeter
G1 X105.456 Y105.135 E0.00179 ; perimeter
G1 X104.770 Y105.809 E0.04453 ; perimeter
G1 X104.597 Y105.943 E0.01013 ; perimeter
G1 X104.413 Y106.008 E0.00905 ; perimeter
G1 X104.315 Y106.017 E0.00458 ; perimeter
G1 X104.141 Y105.978 E0.00823 ; perimeter
G1 X103.985 Y105.829 E0.00997 ; perimeter
G1 X103.954 Y105.682 E0.00699 ; perimeter
G1 X103.914 Y105.599 E0.00424 ; perimeter
G1 X104.186 Y105.426 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.007 Y105.247 E-0.09611 ; wipe and retract
G1 X104.632 Y104.654 E-0.22743 ; wipe and retract
G1 X104.585 Y104.488 E-0.04544 ; wipe and retract
G1 X104.762 Y104.677 E-0.06826 ; wipe and retract
G1 X105.349 Y105.115 E-0.19323 ; wipe and retract
G1 X105.423 Y105.114 E-0.01950 ; wipe and retract
G1 X105.456 Y105.135 E-0.01020 ; wipe and retract
G1 X104.770 Y105.809 E-0.25370 ; wipe and retract
G1 X104.597 Y105.943 E-0.05769 ; wipe and retract
G1 X104.413 Y106.008 E-0.05155 ; wipe and retract
G1 X104.315 Y106.017 E-0.02611 ; wipe and retract
G1 X104.141 Y105.978 E-0.04687 ; wipe and retract
G1 X103.985 Y105.829 E-0.05680 ; wipe and retract
G1 X103.954 Y105.682 E-0.03983 ; wipe and retract
G1 X103.914 Y105.599 E-0.02413 ; wipe and retract
;WIPE_END
G1 E-1.18315 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X102.764 Y102.397 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.741 Y101.994 E0.01368 ; perimeter
G1 X102.771 Y101.805 E0.00648 ; perimeter
G1 X102.825 Y101.821 E0.00190 ; perimeter
G1 X102.947 Y101.959 E0.00626 ; perimeter
G1 X103.325 Y102.120 E0.01389 ; perimeter
G1 X103.333 Y102.190 E0.00239 ; perimeter
G1 X103.162 Y102.157 E0.00590 ; perimeter
G1 X102.816 Y102.366 E0.01369 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.741 Y101.994 E-0.10025 ; wipe and retract
G1 X102.771 Y101.805 E-0.05049 ; wipe and retract
G1 X102.825 Y101.821 E-0.01484 ; wipe and retract
G1 X102.947 Y101.959 E-0.04882 ; wipe and retract
G1 X103.325 Y102.120 E-0.10830 ; wipe and retract
G1 X103.333 Y102.190 E-0.01867 ; wipe and retract
G1 X103.162 Y102.157 E-0.04596 ; wipe and retract
G1 X102.816 Y102.366 E-0.10675 ; wipe and retract
;WIPE_END
G1 E-1.90593 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X102.181 Y100.132 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X102.006 Y99.901 E0.00981 ; perimeter
G1 X101.955 Y99.784 E0.00432 ; perimeter
G1 X102.025 Y99.768 E0.00244 ; perimeter
G1 X102.162 Y99.681 E0.00548 ; perimeter
G1 X102.351 Y99.628 E0.00664 ; perimeter
G1 X102.220 Y99.939 E0.01143 ; perimeter
G1 X102.193 Y100.073 E0.00461 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.006 Y99.901 E-0.06712 ; wipe and retract
G1 X101.955 Y99.784 E-0.03368 ; wipe and retract
G1 X102.025 Y99.768 E-0.01900 ; wipe and retract
G1 X102.162 Y99.681 E-0.04274 ; wipe and retract
G1 X102.351 Y99.628 E-0.05178 ; wipe and retract
G1 X102.220 Y99.939 E-0.08909 ; wipe and retract
G1 X102.193 Y100.073 E-0.03595 ; wipe and retract
;WIPE_END
G1 E-2.06064 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X104.215 Y97.616 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X104.225 Y97.583 E0.00116 ; perimeter
G1 X104.151 Y97.395 E0.00684 ; perimeter
G1 X104.149 Y96.893 E0.01700 ; perimeter
G1 X104.553 Y96.837 E0.01379 ; perimeter
G1 X105.003 Y96.662 E0.01637 ; perimeter
G1 X105.387 Y96.575 E0.01332 ; perimeter
G1 X105.718 Y96.678 E0.01171 ; perimeter
G1 X106.016 Y96.879 E0.01216 ; perimeter
G1 X105.410 Y97.087 E0.02169 ; perimeter
G1 X104.917 Y97.219 E0.01729 ; perimeter
G1 X104.260 Y97.577 E0.02532 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.225 Y97.583 E-0.00927 ; wipe and retract
G1 X104.151 Y97.395 E-0.05336 ; wipe and retract
G1 X104.149 Y96.893 E-0.13255 ; wipe and retract
G1 X104.553 Y96.837 E-0.10754 ; wipe and retract
G1 X105.003 Y96.662 E-0.12764 ; wipe and retract
G1 X105.387 Y96.575 E-0.10387 ; wipe and retract
G1 X105.718 Y96.678 E-0.09128 ; wipe and retract
G1 X106.016 Y96.879 E-0.09482 ; wipe and retract
G1 X105.410 Y97.087 E-0.16907 ; wipe and retract
G1 X104.917 Y97.219 E-0.13476 ; wipe and retract
G1 X104.260 Y97.577 E-0.19740 ; wipe and retract
;WIPE_END
G1 E-1.17844 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X110.444 Y99.959 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.672 Y100.270 E0.01305 ; perimeter
G1 X110.982 Y100.497 E0.01303 ; perimeter
G1 X110.663 Y100.393 E0.01137 ; perimeter
G1 X110.476 Y100.440 E0.00652 ; perimeter
G1 X110.449 Y100.019 E0.01429 ; perimeter
G1 X109.993 Y100.333 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X109.972 Y100.096 E0.01103 ; perimeter
G1 X109.910 Y99.981 E0.00604 ; perimeter
G1 X109.881 Y99.787 E0.00907 ; perimeter
G1 X109.504 Y99.241 E0.03075 ; perimeter
G1 X109.069 Y98.541 E0.03814 ; perimeter
G1 X108.881 Y98.197 E0.01820 ; perimeter
G1 X108.740 Y98.041 E0.00973 ; perimeter
G1 X108.640 Y97.886 E0.00855 ; perimeter
G1 X107.981 Y97.538 E0.03451 ; perimeter
G1 X107.232 Y97.261 E0.03697 ; perimeter
G1 X106.823 Y97.218 E0.01904 ; perimeter
G1 X106.501 Y97.290 E0.01528 ; perimeter
G1 X106.262 Y97.303 E0.01108 ; perimeter
G1 X105.551 Y97.549 E0.03487 ; perimeter
G1 X105.097 Y97.670 E0.02177 ; perimeter
G1 X104.541 Y97.973 E0.02934 ; perimeter
G1 X104.012 Y98.507 E0.03481 ; perimeter
G1 X103.791 Y99.192 E0.03331 ; perimeter
G1 X103.539 Y99.329 E0.01329 ; perimeter
G1 X103.464 Y99.358 E0.00373 ; perimeter
G1 X103.306 Y99.377 E0.00738 ; perimeter
G1 X102.882 Y99.609 E0.02237 ; perimeter
G1 X102.683 Y100.082 E0.02378 ; perimeter
G1 X102.622 Y100.384 E0.01429 ; perimeter
G1 X102.743 Y100.800 E0.02006 ; perimeter
G1 X102.988 Y101.366 E0.02858 ; perimeter
G1 X103.094 Y101.397 E0.00511 ; perimeter
G1 X103.238 Y101.561 E0.01009 ; perimeter
G1 X103.431 Y101.645 E0.00973 ; perimeter
G1 X103.701 Y101.669 E0.01258 ; perimeter
G1 X103.778 Y101.725 E0.00442 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.785 Y101.734 E0.00049 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.773 Y101.817 E0.00386 ; perimeter
G1 X103.823 Y102.227 E0.01915 ; perimeter
G1 X103.831 Y102.594 E0.01697 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X103.837 Y102.646 E0.00221 ; perimeter (bridge)
G1 X103.751 Y102.705 E0.00437 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.662 Y102.766 E0.00495 ; perimeter
G1 X103.636 Y102.740 E0.00171 ; perimeter
G1 X103.253 Y102.666 E0.01809 ; perimeter
G1 X102.549 Y103.090 E0.03807 ; perimeter
G1 X102.464 Y103.102 E0.00397 ; perimeter
G1 X102.351 Y103.036 E0.00603 ; perimeter
G1 X102.275 Y102.865 E0.00867 ; perimeter
G1 X102.248 Y102.566 E0.01391 ; perimeter
G1 X102.283 Y102.417 E0.00709 ; perimeter
G1 X102.257 Y101.970 E0.02076 ; perimeter
G1 X102.285 Y101.793 E0.00829 ; perimeter
G1 X102.047 Y101.101 E0.03387 ; perimeter
G1 X101.955 Y100.713 E0.01851 ; perimeter
G1 X101.801 Y100.428 E0.01497 ; perimeter
G1 X101.586 Y100.146 E0.01644 ; perimeter
G1 X101.493 Y99.931 E0.01085 ; perimeter
G1 X101.412 Y99.823 E0.00625 ; perimeter
G1 X101.389 Y99.645 E0.00834 ; perimeter
G1 X101.450 Y99.521 E0.00636 ; perimeter
G1 X101.450 Y99.484 E0.00175 ; perimeter
G1 X101.593 Y99.369 E0.00850 ; perimeter
G1 X101.839 Y99.316 E0.01165 ; perimeter
G1 X101.964 Y99.236 E0.00685 ; perimeter
G1 X102.173 Y99.178 E0.01003 ; perimeter
G1 X102.447 Y99.042 E0.01418 ; perimeter
G1 X102.931 Y98.655 E0.02874 ; perimeter
G1 X103.089 Y98.559 E0.00855 ; perimeter
G1 X103.535 Y98.184 E0.02699 ; perimeter
G1 X103.715 Y97.603 E0.02818 ; perimeter
G1 X103.670 Y97.488 E0.00571 ; perimeter
G1 X103.668 Y97.138 E0.01620 ; perimeter
G1 X103.519 Y97.035 E0.00838 ; perimeter
G1 X103.370 Y96.781 E0.01366 ; perimeter
G1 X103.223 Y96.714 E0.00750 ; perimeter
G1 X103.145 Y96.619 E0.00572 ; perimeter
G1 X103.123 Y96.569 E0.00248 ; perimeter
G1 X103.231 Y96.521 E0.00545 ; perimeter
G1 X103.612 Y96.452 E0.01796 ; perimeter
G1 X103.717 Y96.466 E0.00492 ; perimeter
G1 X104.431 Y96.368 E0.03335 ; perimeter
G1 X104.862 Y96.200 E0.02144 ; perimeter
G1 X105.392 Y96.081 E0.02514 ; perimeter
G1 X105.683 Y96.149 E0.01385 ; perimeter
G1 X105.944 Y96.249 E0.01296 ; perimeter
G1 X106.203 Y96.429 E0.01458 ; perimeter
G1 X106.632 Y96.539 E0.02055 ; perimeter
G1 X107.061 Y96.720 E0.02157 ; perimeter
G1 X108.189 Y97.434 E0.06184 ; perimeter
G1 X109.077 Y97.957 E0.04776 ; perimeter
G1 X109.362 Y98.159 E0.01617 ; perimeter
G1 X109.753 Y98.483 E0.02350 ; perimeter
G1 X110.241 Y98.979 E0.03223 ; perimeter
G1 X110.719 Y99.520 E0.03346 ; perimeter
G1 X111.016 Y99.925 E0.02324 ; perimeter
G1 X111.363 Y100.178 E0.01991 ; perimeter
G1 X111.758 Y100.399 E0.02094 ; perimeter
G1 X112.179 Y100.717 E0.02444 ; perimeter
G1 X112.350 Y100.948 E0.01332 ; perimeter
G1 X112.385 Y101.106 E0.00752 ; perimeter
G1 X112.316 Y101.176 E0.00455 ; perimeter
G1 X112.132 Y101.231 E0.00889 ; perimeter
G1 X111.618 Y101.163 E0.02403 ; perimeter
G1 X111.320 Y101.056 E0.01466 ; perimeter
G1 X111.139 Y101.055 E0.00837 ; perimeter
G1 X110.646 Y100.895 E0.02402 ; perimeter
G1 X109.934 Y101.074 E0.03402 ; perimeter
G1 X109.689 Y101.076 E0.01135 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X109.405 Y101.090 E0.01186 ; perimeter (bridge)
G1 X109.512 Y100.980 E0.00639 ; perimeter (bridge)
G1 X109.683 Y100.852 E0.00892 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.850 Y100.627 E0.01299 ; perimeter
G1 X109.967 Y100.387 E0.01237 ; perimeter
G1 X110.212 Y100.239 F10800.000 ; move inwards before travel
G1 X110.135 Y99.858 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.285013
G1 F2400.000
G1 X110.245 Y99.599 E0.00567 ; infill
G1 X109.803 Y99.045 E0.01427 ; infill
;WIDTH:0.276222
G1 X109.673 Y98.879 E0.00410 ; infill
;WIDTH:0.229573
G1 X109.542 Y98.713 E0.00328 ; infill
;WIDTH:0.182923
G1 X109.445 Y98.601 E0.00172 ; infill
;WIDTH:0.139922
G1 X109.348 Y98.490 E0.00119 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.445 Y98.601 E-0.03897 ; wipe and retract
;WIPE_END
G1 E-2.36103 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X111.121 Y100.795 ; move to first infill point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.309801
G1 F2400.000
G1 X111.365 Y100.648 E0.00632 ; infill
G1 X111.545 Y100.725 E0.00436 ; infill
G1 X111.999 Y100.970 E0.01144 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.545 Y100.725 E-0.13609 ; wipe and retract
G1 X111.365 Y100.648 E-0.05184 ; wipe and retract
G1 X111.121 Y100.795 E-0.07519 ; wipe and retract
;WIPE_END
G1 E-2.13688 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X106.257 Y96.880 ; move to first infill point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.358999
G1 F2400.000
G1 X106.973 Y96.950 E0.01891 ; infill
G1 X106.966 Y96.970 F10800.000 ; move to first infill point
;WIDTH:0.0992766
G1 F2400.000
G1 X106.255 Y96.833 E0.00339 ; infill
G1 X105.478 Y96.806 F10800.000 ; move to first infill point
;WIDTH:0.140903
G1 F2400.000
G1 X104.831 Y96.990 E0.00548 ; infill
;WIDTH:0.12197
G1 X104.483 Y97.133 E0.00247 ; infill
;WIDTH:0.217886
G1 X104.354 Y97.175 E0.00197 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.483 Y97.133 E-0.03581 ; wipe and retract
;WIPE_END
G1 E-2.36419 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X102.362 Y100.821 ; move to first infill point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.310653
G1 F2400.000
G1 X102.393 Y100.935 E0.00263 ; infill
;WIDTH:0.321639
G1 X102.413 Y100.995 E0.00146 ; infill
;WIDTH:0.350946
G1 X102.548 Y101.344 E0.00958 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.413 Y100.995 E-0.09868 ; wipe and retract
;WIPE_END
G1 E-2.30132 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X104.390 Y105.527 ; move to first infill point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.472537
G1 F2400.000
G1 X104.384 Y105.535 E0.00039 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.390 Y105.527 E-0.00286 ; wipe and retract
;WIPE_END
G1 E-2.39714 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X114.666 Y105.453 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.688 Y105.517 E0.00314 ; perimeter
G1 X114.669 Y105.630 E0.00531 ; perimeter
G1 X114.543 Y105.871 E0.01263 ; perimeter
G1 X114.305 Y106.122 E0.01599 ; perimeter
G1 X114.172 Y106.224 E0.00779 ; perimeter
G1 X113.784 Y106.455 E0.02091 ; perimeter
G1 X113.433 Y106.606 E0.01770 ; perimeter
G1 X113.047 Y106.688 E0.01829 ; perimeter
G1 X112.812 Y106.625 E0.01125 ; perimeter
G1 X112.779 Y106.562 E0.00329 ; perimeter
G1 X112.837 Y106.348 E0.01024 ; perimeter
G1 X113.069 Y106.066 E0.01690 ; perimeter
G1 X113.198 Y105.955 E0.00789 ; perimeter
G1 X113.583 Y105.685 E0.02179 ; perimeter
G1 X113.967 Y105.503 E0.01967 ; perimeter
G1 X114.344 Y105.418 E0.01792 ; perimeter
G1 X114.606 Y105.448 E0.01219 ; perimeter
G1 X114.647 Y105.518 F10800.000 ; move inwards before travel
G1 X114.316 Y105.671 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.279309
G1 F2400.000
G1 X114.064 Y105.854 E0.00612 ; infill
G1 X113.414 Y106.232 E0.01478 ; infill
;WIDTH:0.262261
G1 X113.331 Y106.284 E0.00179 ; infill
;WIDTH:0.232313
G1 X113.116 Y106.391 E0.00378 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.331 Y106.284 E-0.06329 ; wipe and retract
;WIPE_END
G1 E-2.33671 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X108.771 Y109.217 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X108.774 Y109.182 E0.00165 ; perimeter
G1 X108.854 Y109.114 E0.00488 ; perimeter
G1 X109.182 Y108.959 E0.01678 ; perimeter
G1 X109.509 Y108.896 E0.01543 ; perimeter
G1 X109.854 Y108.870 E0.01606 ; perimeter
G1 X110.654 Y108.912 E0.03710 ; perimeter
G1 X111.205 Y109.096 E0.02690 ; perimeter
G1 X111.244 Y109.167 E0.00373 ; perimeter
G1 X111.338 Y109.265 E0.00630 ; perimeter
G1 X111.107 Y109.507 E0.01550 ; perimeter
G1 X110.684 Y109.651 E0.02070 ; perimeter
G1 X110.069 Y109.691 E0.02854 ; perimeter
G1 X109.583 Y109.655 E0.02256 ; perimeter
G1 X109.180 Y109.545 E0.01934 ; perimeter
G1 X108.910 Y109.417 E0.01386 ; perimeter
G1 X108.805 Y109.267 E0.00849 ; perimeter
G1 X108.797 Y109.192 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.774 Y109.182 E-0.02392 ; wipe and retract
G1 X108.854 Y109.114 E-0.02779 ; wipe and retract
G1 X109.182 Y108.959 E-0.09559 ; wipe and retract
G1 X109.509 Y108.896 E-0.08789 ; wipe and retract
G1 X109.854 Y108.870 E-0.09148 ; wipe and retract
G1 X110.654 Y108.912 E-0.21138 ; wipe and retract
G1 X111.205 Y109.096 E-0.15327 ; wipe and retract
G1 X111.244 Y109.167 E-0.02127 ; wipe and retract
G1 X111.338 Y109.265 E-0.03589 ; wipe and retract
G1 X111.107 Y109.507 E-0.08829 ; wipe and retract
G1 X110.684 Y109.651 E-0.11791 ; wipe and retract
G1 X110.069 Y109.691 E-0.16262 ; wipe and retract
G1 X109.583 Y109.655 E-0.12854 ; wipe and retract
G1 X109.180 Y109.545 E-0.11018 ; wipe and retract
G1 X108.910 Y109.417 E-0.07895 ; wipe and retract
G1 X108.805 Y109.267 E-0.04834 ; wipe and retract
;WIPE_END
G1 E-0.91670 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X110.898 Y109.324 ; move to first infill point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.308214
G1 F2400.000
G1 X110.585 Y109.283 E0.00696 ; infill
G1 X109.649 Y109.273 E0.02067 ; infill
G1 X109.169 Y109.227 E0.01062 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.649 Y109.273 E-0.12703 ; wipe and retract
G1 X110.585 Y109.283 E-0.24721 ; wipe and retract
G1 X110.898 Y109.324 E-0.08321 ; wipe and retract
;WIPE_END
G1 E-1.94255 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 X114.057 Y113.250 ; move to first perimeter point
G1 Z27.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.093 Y113.045 E0.00704 ; perimeter
G1 X114.190 Y112.884 E0.00637 ; perimeter
G1 X114.359 Y112.658 E0.00955 ; perimeter
G1 X114.448 Y112.582 E0.00395 ; perimeter
G1 X114.585 Y112.376 E0.00839 ; perimeter
G1 X114.755 Y112.323 E0.00602 ; perimeter
G1 X115.031 Y112.340 E0.00936 ; perimeter
G1 X115.231 Y112.266 E0.00722 ; perimeter
G1 X115.374 Y112.275 E0.00484 ; perimeter
G1 X115.401 Y112.364 E0.00316 ; perimeter
G1 X115.374 Y113.319 E0.03235 ; perimeter
G1 X115.337 Y113.819 E0.01697 ; perimeter
G1 X115.294 Y114.124 E0.01041 ; perimeter
G1 X115.166 Y113.892 E0.00894 ; perimeter
G1 X114.897 Y113.603 E0.01338 ; perimeter
G1 X114.348 Y113.407 E0.01972 ; perimeter
G1 X114.250 Y113.418 E0.00333 ; perimeter
G1 X114.139 Y113.382 E0.00396 ; perimeter
G1 X114.068 Y113.309 E0.00345 ; perimeter
G1 X113.616 Y113.507 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.566 Y113.254 E0.01193 ; perimeter
G1 X113.637 Y112.858 E0.01862 ; perimeter
G1 X113.735 Y112.715 E0.00806 ; perimeter
G1 X113.750 Y112.658 E0.00270 ; perimeter
G1 X113.923 Y112.450 E0.01255 ; perimeter
G1 X113.961 Y112.363 E0.00439 ; perimeter
G1 X114.084 Y112.258 E0.00752 ; perimeter
G1 X114.302 Y111.959 E0.01712 ; perimeter
G1 X114.696 Y111.837 E0.01913 ; perimeter
G1 X114.959 Y111.852 E0.01221 ; perimeter
G1 X115.133 Y111.788 E0.00859 ; perimeter
G1 X115.271 Y111.779 E0.00639 ; perimeter
G1 X115.551 Y111.802 E0.01300 ; perimeter
G1 X115.643 Y111.828 E0.00446 ; perimeter
G1 X115.788 Y111.982 E0.00980 ; perimeter
G1 X115.886 Y112.298 E0.01530 ; perimeter
G1 X115.855 Y113.344 E0.04846 ; perimeter
G1 X115.817 Y113.870 E0.02446 ; perimeter
G1 X115.742 Y114.402 E0.02488 ; perimeter
G1 X115.582 Y114.873 E0.02305 ; perimeter
G1 X115.499 Y115.004 E0.00718 ; perimeter
G1 X115.378 Y115.049 E0.00599 ; perimeter
G1 X115.235 Y115.011 E0.00684 ; perimeter
G1 X114.773 Y114.178 E0.04414 ; perimeter
G1 X114.624 Y114.018 E0.01013 ; perimeter
G1 X114.290 Y113.899 E0.01642 ; perimeter
G1 X114.200 Y113.908 E0.00418 ; perimeter
G1 X113.912 Y113.816 E0.01405 ; perimeter
G1 X113.721 Y113.669 E0.01116 ; perimeter
G1 X113.648 Y113.557 E0.00617 ; perimeter
G1 X113.774 Y113.304 F10800.000 ; move inwards before travel
G1 X115.247 Y113.376 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.531415
G1 F3600.000
G1 X114.538 Y112.666 E0.04076 ; infill
;LAYER_CHANGE
;Z:27.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;27.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X115.247 Y113.376 E-0.26482 ; wipe and retract
;WIPE_END
G1 E-2.13518 F2400.000 ; retract
G1 Z27.475 F10800.000 ; lift Z
G1 Z27.600 ; move to next layer (137)
;AFTER_LAYER_CHANGE
;27.6
G1 Z27.675 ; lift Z
G1 X114.179 Y105.595 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.367 Y105.648 E0.00908 ; perimeter
G1 X114.366 Y105.839 E0.00881 ; perimeter
G1 X114.265 Y106.031 E0.01008 ; perimeter
G1 X113.946 Y106.357 E0.02111 ; perimeter
G1 X113.561 Y106.607 E0.02125 ; perimeter
G1 X113.386 Y106.683 E0.00886 ; perimeter
G1 X113.156 Y106.832 E0.01268 ; perimeter
G1 X112.878 Y106.902 E0.01329 ; perimeter
G1 X112.786 Y106.995 E0.00606 ; perimeter
G1 X112.498 Y107.105 E0.01429 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X112.406 Y107.140 E0.00413 ; perimeter (bridge)
G1 X112.359 Y107.313 E0.00750 ; perimeter (bridge)
G1 X112.297 Y106.775 E0.02264 ; perimeter (bridge)
G1 X112.049 Y106.514 E0.01504 ; perimeter (bridge)
G1 X112.189 Y106.548 E0.00603 ; perimeter (bridge)
G1 X112.264 Y106.481 E0.00421 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X112.437 Y106.326 E0.01075 ; perimeter
G1 X112.635 Y106.261 E0.00967 ; perimeter
G1 X112.929 Y106.107 E0.01535 ; perimeter
G1 X113.098 Y105.983 E0.00974 ; perimeter
G1 X113.376 Y105.819 E0.01493 ; perimeter
G1 X113.784 Y105.643 E0.02058 ; perimeter
G1 X113.967 Y105.604 E0.00866 ; perimeter
G1 X114.119 Y105.598 E0.00706 ; perimeter
G1 X114.252 Y105.777 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.367 Y105.648 E-0.06695 ; wipe and retract
G1 X114.366 Y105.839 E-0.05021 ; wipe and retract
G1 X114.265 Y106.031 E-0.05744 ; wipe and retract
G1 X113.946 Y106.357 E-0.12026 ; wipe and retract
G1 X113.561 Y106.607 E-0.12106 ; wipe and retract
G1 X113.386 Y106.683 E-0.05050 ; wipe and retract
G1 X113.156 Y106.832 E-0.07226 ; wipe and retract
G1 X112.878 Y106.902 E-0.07571 ; wipe and retract
G1 X112.786 Y106.995 E-0.03450 ; wipe and retract
G1 X112.498 Y107.105 E-0.08140 ; wipe and retract
;WIPE_END
G1 E-1.66972 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X109.322 Y109.081 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X109.568 Y108.974 E0.01241 ; perimeter
G1 X109.844 Y108.917 E0.01307 ; perimeter
G1 X110.258 Y108.875 E0.01925 ; perimeter
G1 X111.104 Y108.917 E0.03927 ; perimeter
G1 X111.280 Y108.886 E0.00825 ; perimeter
G1 X111.529 Y108.885 E0.01156 ; perimeter
G1 X111.640 Y108.849 E0.00539 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X111.767 Y108.809 E0.00554 ; perimeter (bridge)
G1 X111.951 Y108.648 E0.01023 ; perimeter (bridge)
G1 X111.929 Y108.736 E0.00379 ; perimeter (bridge)
G1 X111.972 Y109.533 E0.03336 ; perimeter (bridge)
G1 X111.901 Y109.560 E0.00316 ; perimeter (bridge)
G1 X111.766 Y109.544 E0.00568 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X111.544 Y109.518 E0.01038 ; perimeter
G1 X111.169 Y109.663 E0.01860 ; perimeter
G1 X110.590 Y109.707 E0.02691 ; perimeter
G1 X109.921 Y109.653 E0.03110 ; perimeter
G1 X109.541 Y109.542 E0.01833 ; perimeter
G1 X109.246 Y109.370 E0.01583 ; perimeter
G1 X109.215 Y109.339 E0.00204 ; perimeter
G1 X109.187 Y109.211 E0.00606 ; perimeter
G1 X109.200 Y109.178 E0.00163 ; perimeter
G1 X109.275 Y109.118 E0.00446 ; perimeter
G1 X109.555 Y109.214 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.568 Y108.974 E-0.08607 ; wipe and retract
G1 X109.844 Y108.917 E-0.07444 ; wipe and retract
G1 X110.258 Y108.875 E-0.10965 ; wipe and retract
G1 X111.104 Y108.917 E-0.22375 ; wipe and retract
G1 X111.280 Y108.886 E-0.04702 ; wipe and retract
G1 X111.529 Y108.885 E-0.06583 ; wipe and retract
G1 X111.640 Y108.849 E-0.03073 ; wipe and retract
;WIPE_END
G1 E-1.76252 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X114.581 Y112.068 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X114.686 Y112.076 E0.00357 ; perimeter
G1 X115.005 Y112.210 E0.01172 ; perimeter
G1 X115.077 Y112.206 E0.00244 ; perimeter
G1 X115.189 Y112.268 E0.00433 ; perimeter
G1 X115.337 Y112.291 E0.00506 ; perimeter
G1 X115.359 Y112.321 E0.00127 ; perimeter
G1 X115.400 Y112.427 E0.00385 ; perimeter
G1 X115.401 Y112.985 E0.01889 ; perimeter
G1 X115.331 Y113.592 E0.02066 ; perimeter
G1 X115.172 Y113.315 E0.01080 ; perimeter
G1 X114.461 Y113.045 E0.02575 ; perimeter
G1 X114.183 Y113.076 E0.00948 ; perimeter
G1 X114.207 Y112.910 E0.00566 ; perimeter
G1 X114.271 Y112.718 E0.00687 ; perimeter
G1 X114.326 Y112.651 E0.00294 ; perimeter
G1 X114.458 Y112.343 E0.01133 ; perimeter
G1 X114.467 Y112.281 E0.00211 ; perimeter
G1 X114.573 Y112.126 E0.00637 ; perimeter
G1 X114.840 Y113.704 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X114.398 Y113.537 E0.02189 ; perimeter
G1 X114.028 Y113.577 E0.01726 ; perimeter
G1 X113.839 Y113.511 E0.00925 ; perimeter
G1 X113.726 Y113.359 E0.00882 ; perimeter
G1 X113.688 Y113.128 E0.01083 ; perimeter
G1 X113.746 Y112.730 E0.01863 ; perimeter
G1 X113.784 Y112.674 E0.00316 ; perimeter
G1 X113.831 Y112.492 E0.00867 ; perimeter
G1 X113.911 Y112.396 E0.00581 ; perimeter
G1 X113.990 Y112.213 E0.00924 ; perimeter
G1 X114.005 Y112.103 E0.00515 ; perimeter
G1 X114.106 Y111.956 E0.00827 ; perimeter
G1 X114.114 Y111.843 E0.00524 ; perimeter
G1 X114.292 Y111.642 E0.01242 ; perimeter
G1 X114.197 Y111.467 E0.00924 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X114.183 Y111.419 E0.00207 ; perimeter (bridge)
G1 X114.303 Y111.432 E0.00503 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X114.607 Y111.586 E0.01578 ; perimeter
G1 X114.800 Y111.601 E0.00899 ; perimeter
G1 X115.090 Y111.723 E0.01456 ; perimeter
G1 X115.190 Y111.717 E0.00463 ; perimeter
G1 X115.348 Y111.805 E0.00837 ; perimeter
G1 X115.554 Y111.837 E0.00964 ; perimeter
G1 X115.659 Y111.919 E0.00620 ; perimeter
G1 X115.785 Y112.084 E0.00959 ; perimeter
G1 X115.882 Y112.337 E0.01255 ; perimeter
G1 X115.884 Y113.009 E0.03116 ; perimeter
G1 X115.826 Y113.573 E0.02623 ; perimeter
G1 X115.744 Y113.999 E0.02009 ; perimeter
G1 X115.608 Y114.379 E0.01869 ; perimeter
G1 X115.423 Y114.688 E0.01672 ; perimeter
G1 X115.382 Y114.708 E0.00211 ; perimeter
G1 X115.306 Y114.639 E0.00472 ; perimeter
G1 X115.078 Y114.120 E0.02627 ; perimeter
G1 X114.870 Y113.756 E0.01941 ; perimeter
G1 X114.875 Y113.306 F10800.000 ; move inwards before travel
G1 X114.527 Y112.940 ; move to first infill point
;TYPE:Solid infill
;WIDTH:0.531415
G1 F3600.000
G1 X115.105 Y112.362 E0.03322 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.527 Y112.940 E-0.21583 ; wipe and retract
;WIPE_END
G1 E-2.18417 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X109.559 Y109.241 ; move to first infill point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.292432
G1 F2400.000
G1 X109.990 Y109.281 E0.00897 ; infill
G1 X110.594 Y109.299 E0.01255 ; infill
G1 X111.082 Y109.293 E0.01013 ; infill
G1 X111.311 Y109.234 E0.00489 ; infill
;WIDTH:0.193105
G1 X111.521 Y109.199 E0.00266 ; infill
;WIDTH:0.201208
G1 X111.592 Y109.201 E0.00093 ; infill
;WIDTH:0.215779
G1 X111.712 Y109.189 E0.00174 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.592 Y109.201 E-0.03189 ; wipe and retract
;WIPE_END
G1 E-2.36811 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X112.638 Y106.636 ; move to first infill point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.245506
G1 F2400.000
G1 X112.776 Y106.574 E0.00255 ; infill
;WIDTH:0.252646
G1 X113.006 Y106.487 E0.00429 ; infill
G1 X113.713 Y106.072 E0.01428 ; infill
G1 X114.048 Y105.842 E0.00708 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.713 Y106.072 E-0.10721 ; wipe and retract
G1 X113.006 Y106.487 E-0.21613 ; wipe and retract
G1 X112.776 Y106.574 E-0.06494 ; wipe and retract
;WIPE_END
G1 E-2.01172 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X111.026 Y100.527 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.682 Y100.527 E0.01165 ; perimeter
G1 X110.278 Y100.624 E0.01403 ; perimeter
G1 X110.350 Y100.518 E0.00433 ; perimeter
G1 X110.441 Y100.059 E0.01586 ; perimeter
G1 X110.430 Y99.986 E0.00250 ; perimeter
G1 X110.575 Y100.195 E0.00863 ; perimeter
G1 X110.977 Y100.492 E0.01691 ; perimeter
G1 X112.069 Y100.946 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X111.950 Y100.991 E0.00588 ; perimeter
G1 X111.858 Y101.063 E0.00541 ; perimeter
G1 X111.797 Y101.070 E0.00286 ; perimeter
G1 X111.292 Y101.009 E0.02355 ; perimeter
G1 X110.739 Y101.009 E0.02563 ; perimeter
G1 X109.017 Y101.446 E0.08230 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.740 Y101.527 E0.01203 ; perimeter (bridge)
G1 X108.622 Y101.648 E0.00709 ; perimeter (bridge)
G1 X108.481 Y101.644 E0.00588 ; perimeter (bridge)
G1 X108.419 Y101.489 E0.00700 ; perimeter (bridge)
G1 X108.620 Y101.318 E0.01103 ; perimeter (bridge)
G1 X108.852 Y101.194 E0.01101 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X109.464 Y100.753 E0.03493 ; perimeter
G1 X109.701 Y100.619 E0.01263 ; perimeter
G1 X109.896 Y100.329 E0.01617 ; perimeter
G1 X109.952 Y100.047 E0.01332 ; perimeter
G1 X109.920 Y99.836 E0.00988 ; perimeter
G1 X109.830 Y99.700 E0.00758 ; perimeter
G1 X109.756 Y99.467 E0.01133 ; perimeter
G1 X109.558 Y99.123 E0.01838 ; perimeter
G1 X109.351 Y98.641 E0.02430 ; perimeter
G1 X109.372 Y98.502 E0.00650 ; perimeter
G1 X109.548 Y98.568 E0.00870 ; perimeter
G1 X109.785 Y98.707 E0.01275 ; perimeter
G1 X109.968 Y98.851 E0.01079 ; perimeter
G1 X110.079 Y98.972 E0.00759 ; perimeter
G1 X110.465 Y99.303 E0.02358 ; perimeter
G1 X110.791 Y99.660 E0.02238 ; perimeter
G1 X110.926 Y99.855 E0.01099 ; perimeter
G1 X111.725 Y100.443 E0.04598 ; perimeter
G1 X112.011 Y100.752 E0.01948 ; perimeter
G1 X112.052 Y100.889 E0.00659 ; perimeter
G1 X111.942 Y100.935 F10800.000 ; move inwards before travel
G1 X111.488 Y100.568 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.211869
G1 F2400.000
G1 X111.202 Y100.762 E0.00485 ; infill
G1 X110.348 Y99.759 F10800.000 ; move to first infill point
;WIDTH:0.179054
G1 F2400.000
G1 X109.964 Y99.251 E0.00720 ; infill
;WIDTH:0.135262
G1 X109.894 Y99.166 E0.00085 ; infill
;WIDTH:0.0980059
G1 X109.875 Y99.141 E0.00014 ; infill
G1 X109.900 Y99.234 F10800.000 ; move to first infill point
;WIDTH:0.317629
G1 F2400.000
G1 X110.202 Y99.575 E0.01040 ; infill
G1 X110.253 Y99.642 E0.00192 ; infill
G1 X110.245 Y99.666 E0.00059 ; infill
;WIDTH:0.290942
G1 X110.238 Y99.691 E0.00053 ; infill
;WIDTH:0.251033
G1 X110.209 Y99.758 E0.00127 ; infill
;WIDTH:0.214509
G1 X110.180 Y99.825 E0.00104 ; infill
G1 X109.781 Y100.931 F10800.000 ; move to first infill point
;WIDTH:0.158736
G1 F2400.000
G1 X109.625 Y100.997 E0.00163 ; infill
;WIDTH:0.144419
G1 X109.485 Y101.068 E0.00133 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.625 Y100.997 E-0.04149 ; wipe and retract
;WIPE_END
G1 E-2.35851 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X104.909 Y105.099 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.732 Y105.234 E0.00756 ; perimeter
G1 X104.863 Y105.083 E0.00677 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.732 Y105.234 E-0.05281 ; wipe and retract
G1 X104.863 Y105.083 E-0.05281 ; wipe and retract
;WIPE_END
G1 E-2.29439 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X102.938 Y101.273 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.724 Y100.787 E0.02460 ; perimeter
G1 X102.618 Y100.252 E0.02529 ; perimeter
G1 X102.878 Y99.702 E0.02815 ; perimeter
G1 X103.344 Y99.499 E0.02357 ; perimeter
G1 X103.578 Y99.470 E0.01089 ; perimeter
G1 X103.947 Y99.676 E0.01959 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.066 Y99.743 E0.00573 ; perimeter (bridge)
G1 X104.155 Y100.020 E0.01215 ; perimeter (bridge)
G1 X104.310 Y100.341 E0.01491 ; perimeter (bridge)
G1 X104.072 Y100.856 E0.02370 ; perimeter (bridge)
G1 X104.026 Y101.065 E0.00896 ; perimeter (bridge)
G1 X104.010 Y101.074 E0.00076 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X103.851 Y101.167 E0.00852 ; perimeter
G1 X103.610 Y101.384 E0.01505 ; perimeter
G1 X103.285 Y101.434 E0.01523 ; perimeter
G1 X103.205 Y101.352 E0.00529 ; perimeter
G1 X102.995 Y101.290 E0.01013 ; perimeter
G1 X102.541 Y101.326 F10800.000 ; move inwards before travel
G1 X102.859 Y101.753 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X102.948 Y101.779 E0.00314 ; perimeter
G1 X103.112 Y101.948 E0.00799 ; perimeter
G1 X103.625 Y101.870 E0.01754 ; perimeter
G1 X103.595 Y102.135 E0.00904 ; perimeter
G1 X103.604 Y102.386 E0.00850 ; perimeter
G1 X103.031 Y102.192 E0.02047 ; perimeter
G1 X102.815 Y102.286 E0.00798 ; perimeter
G1 X102.751 Y101.721 E0.01925 ; perimeter
G1 X102.801 Y101.736 E0.00175 ; perimeter
G1 X102.189 Y100.031 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X102.111 Y99.824 E0.00749 ; perimeter
G1 X102.378 Y99.631 E0.01114 ; perimeter
G1 X102.215 Y99.977 E0.01293 ; perimeter
G1 X103.134 Y99.064 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.233 Y98.990 E0.00418 ; perimeter
G1 X103.636 Y98.584 E0.01938 ; perimeter
G1 X103.629 Y98.978 E0.01334 ; perimeter
G1 X103.189 Y99.040 E0.01504 ; perimeter
G1 X104.175 Y97.659 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X104.186 Y97.583 E0.00259 ; perimeter
G1 X104.295 Y97.346 E0.00883 ; perimeter
G1 X104.248 Y97.124 E0.00768 ; perimeter
G1 X104.670 Y97.034 E0.01461 ; perimeter
G1 X104.991 Y97.025 E0.01084 ; perimeter
G1 X105.211 Y97.074 E0.00765 ; perimeter
G1 X104.456 Y97.422 E0.02817 ; perimeter
G1 X104.221 Y97.620 E0.01039 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.186 Y97.583 E-0.01349 ; wipe and retract
G1 X104.295 Y97.346 E-0.06883 ; wipe and retract
G1 X104.248 Y97.124 E-0.05990 ; wipe and retract
G1 X104.670 Y97.034 E-0.11391 ; wipe and retract
G1 X104.991 Y97.025 E-0.08454 ; wipe and retract
G1 X105.211 Y97.074 E-0.05961 ; wipe and retract
G1 X104.456 Y97.422 E-0.21959 ; wipe and retract
G1 X104.221 Y97.620 E-0.08097 ; wipe and retract
;WIPE_END
G1 E-1.69917 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X104.356 Y104.763 ; move to first perimeter point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.451 Y104.652 E0.00675 ; perimeter
G1 X103.804 Y103.157 E0.07545 ; perimeter
G1 X103.508 Y102.863 E0.01934 ; perimeter
G1 X103.053 Y102.708 E0.02227 ; perimeter
G1 X102.875 Y102.786 E0.00900 ; perimeter
G1 X102.724 Y102.786 E0.00697 ; perimeter
G1 X102.649 Y102.830 E0.00404 ; perimeter
G1 X102.497 Y102.807 E0.00713 ; perimeter
G1 X102.450 Y102.773 E0.00270 ; perimeter
G1 X102.363 Y102.581 E0.00978 ; perimeter
G1 X102.270 Y101.751 E0.03865 ; perimeter
G1 X102.097 Y101.187 E0.02733 ; perimeter
G1 X102.002 Y100.769 E0.01985 ; perimeter
G1 X101.883 Y100.550 E0.01154 ; perimeter
G1 X101.813 Y100.335 E0.01048 ; perimeter
G1 X101.755 Y100.249 E0.00480 ; perimeter
G1 X101.637 Y99.969 E0.01408 ; perimeter
G1 X101.620 Y99.692 E0.01287 ; perimeter
G1 X101.647 Y99.587 E0.00500 ; perimeter
G1 X102.093 Y99.238 E0.02623 ; perimeter
G1 X102.277 Y99.138 E0.00969 ; perimeter
G1 X102.394 Y99.016 E0.00784 ; perimeter
G1 X102.916 Y98.626 E0.03019 ; perimeter
G1 X103.392 Y98.146 E0.03131 ; perimeter
G1 X103.685 Y97.679 E0.02554 ; perimeter
G1 X103.718 Y97.445 E0.01094 ; perimeter
G1 X103.790 Y97.289 E0.00797 ; perimeter
G1 X103.686 Y96.795 E0.02341 ; perimeter
G1 X103.727 Y96.743 E0.00303 ; perimeter
G1 X104.613 Y96.553 E0.04198 ; perimeter
G1 X105.044 Y96.541 E0.01996 ; perimeter
G1 X105.523 Y96.649 E0.02277 ; perimeter
G1 X106.081 Y96.727 E0.02610 ; perimeter
G1 X106.347 Y96.795 E0.01272 ; perimeter
G1 X106.789 Y96.991 E0.02238 ; perimeter
G1 X106.398 Y97.062 E0.01841 ; perimeter
G1 X105.907 Y97.286 E0.02499 ; perimeter
G1 X105.740 Y97.394 E0.00922 ; perimeter
G1 X105.407 Y97.514 E0.01638 ; perimeter
G1 X104.716 Y97.833 E0.03524 ; perimeter
G1 X104.452 Y98.055 E0.01600 ; perimeter
G1 X104.210 Y98.327 E0.01686 ; perimeter
G1 X104.118 Y98.618 E0.01416 ; perimeter
G1 X104.108 Y99.154 E0.02481 ; perimeter
G1 X104.160 Y99.297 E0.00708 ; perimeter
G1 X104.182 Y99.639 E0.01583 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X104.293 Y99.823 E0.00899 ; perimeter (bridge)
G1 X104.380 Y100.359 E0.02272 ; perimeter (bridge)
G1 X104.717 Y100.478 E0.01493 ; perimeter (bridge)
G1 X104.487 Y100.560 E0.01021 ; perimeter (bridge)
G1 X104.465 Y100.769 E0.00881 ; perimeter (bridge)
G1 X104.153 Y101.245 E0.02377 ; perimeter (bridge)
G1 X104.148 Y101.376 E0.00545 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X104.078 Y102.154 E0.03618 ; perimeter
G1 X104.090 Y102.491 E0.01562 ; perimeter
G1 X104.280 Y103.110 E0.03003 ; perimeter
G1 X104.446 Y103.521 E0.02051 ; perimeter
G1 X104.888 Y104.487 E0.04922 ; perimeter
G1 X105.354 Y104.827 E0.02669 ; perimeter
G1 X105.993 Y104.887 E0.02977 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X106.288 Y104.915 E0.01236 ; perimeter (bridge)
G1 X106.991 Y104.909 E0.02939 ; perimeter (bridge)
G1 X107.654 Y104.939 E0.02774 ; perimeter (bridge)
G1 X107.114 Y105.076 E0.02327 ; perimeter (bridge)
G1 X106.827 Y105.125 E0.01215 ; perimeter (bridge)
G1 X106.130 Y105.193 E0.02928 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X105.594 Y105.284 E0.02519 ; perimeter
G1 X105.442 Y105.388 E0.00854 ; perimeter
G1 X105.293 Y105.413 E0.00700 ; perimeter
G1 X104.845 Y105.753 E0.02603 ; perimeter
G1 X104.693 Y105.836 E0.00802 ; perimeter
G1 X104.467 Y105.890 E0.01078 ; perimeter
G1 X104.387 Y105.891 E0.00372 ; perimeter
G1 X104.247 Y105.859 E0.00663 ; perimeter
G1 X104.116 Y105.717 E0.00896 ; perimeter
G1 X104.080 Y105.554 E0.00776 ; perimeter
G1 X104.171 Y105.144 E0.01943 ; perimeter
G1 X104.373 Y104.912 E0.01426 ; perimeter
G1 X104.363 Y104.822 E0.00418 ; perimeter
G1 X104.501 Y104.777 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.451 Y104.652 E-0.05058 ; wipe and retract
G1 X103.804 Y103.157 E-0.42985 ; wipe and retract
G1 X103.508 Y102.863 E-0.11017 ; wipe and retract
G1 X103.053 Y102.708 E-0.12689 ; wipe and retract
G1 X102.875 Y102.786 E-0.05129 ; wipe and retract
G1 X102.724 Y102.786 E-0.03968 ; wipe and retract
G1 X102.649 Y102.830 E-0.02299 ; wipe and retract
G1 X102.497 Y102.807 E-0.04062 ; wipe and retract
G1 X102.450 Y102.773 E-0.01539 ; wipe and retract
G1 X102.363 Y102.581 E-0.05572 ; wipe and retract
G1 X102.270 Y101.751 E-0.22021 ; wipe and retract
G1 X102.097 Y101.187 E-0.15571 ; wipe and retract
G1 X102.002 Y100.769 E-0.11306 ; wipe and retract
G1 X101.883 Y100.550 E-0.06575 ; wipe and retract
G1 X101.813 Y100.335 E-0.05969 ; wipe and retract
G1 X101.755 Y100.249 E-0.02735 ; wipe and retract
G1 X101.637 Y99.969 E-0.08023 ; wipe and retract
G1 X101.620 Y99.692 E-0.07331 ; wipe and retract
G1 X101.647 Y99.587 E-0.02847 ; wipe and retract
G1 X102.093 Y99.238 E-0.14941 ; wipe and retract
G1 X102.277 Y99.138 E-0.05520 ; wipe and retract
G1 X102.394 Y99.016 E-0.04465 ; wipe and retract
G1 X102.916 Y98.626 E-0.17197 ; wipe and retract
G1 X103.161 Y98.379 E-0.09179 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X107.905 Y104.876 ; move to first perimeter (bridge) point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X108.159 Y104.712 E0.01264 ; perimeter (bridge)
G1 X108.255 Y104.841 E0.00672 ; perimeter (bridge)
G1 X108.470 Y104.586 E0.01391 ; perimeter (bridge)
G1 X108.549 Y104.816 E0.01016 ; perimeter (bridge)
G1 X108.609 Y104.902 E0.00434 ; perimeter (bridge)
G1 X108.031 Y104.844 E0.02424 ; perimeter (bridge)
G1 X107.963 Y104.861 E0.00294 ; perimeter (bridge)
M107 ; disable fan
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.159 Y104.712 E-0.06499 ; wipe and retract
G1 X108.255 Y104.841 E-0.04242 ; wipe and retract
G1 X108.470 Y104.586 E-0.08783 ; wipe and retract
G1 X108.549 Y104.816 E-0.06412 ; wipe and retract
G1 X108.609 Y104.902 E-0.02740 ; wipe and retract
G1 X108.031 Y104.844 E-0.15305 ; wipe and retract
G1 X107.963 Y104.861 E-0.01858 ; wipe and retract
;WIPE_END
G1 E-1.94161 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X105.406 Y105.074 ; move to first infill point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.117787
;HEIGHT:0.2
G1 F2400.000
G1 X105.273 Y105.151 E0.00096 ; infill
G1 X104.790 Y104.714 F10800.000 ; move to first infill point
;WIDTH:0.155584
G1 F2400.000
G1 X104.616 Y104.915 E0.00250 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.790 Y104.714 E-0.07034 ; wipe and retract
;WIPE_END
G1 E-2.32966 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X103.859 Y102.711 ; move to first infill point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.0988159
G1 F2400.000
G1 X103.883 Y102.735 E0.00016 ; infill
;WIDTH:0.133288
G1 X103.874 Y102.762 E0.00021 ; infill
;WIDTH:0.16776
G1 X103.864 Y102.789 E0.00030 ; infill
G1 X103.708 Y102.715 E0.00178 ; infill
G1 X102.453 Y101.444 F10800.000 ; move to first infill point
;WIDTH:0.10204
G1 F2400.000
G1 X102.442 Y101.390 E0.00027 ; infill
G1 X102.469 Y101.339 E0.00028 ; infill
;WIDTH:0.223583
G1 X102.508 Y101.262 E0.00131 ; infill
;WIDTH:0.320368
G1 X102.454 Y101.092 E0.00411 ; infill
;WIDTH:0.300086
G1 X102.392 Y100.904 E0.00423 ; infill
;WIDTH:0.262296
G1 X102.318 Y100.595 E0.00581 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.392 Y100.904 E-0.08400 ; wipe and retract
;WIPE_END
G1 E-2.31600 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 X103.903 Y98.419 ; move to first infill point
G1 Z27.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.140599
G1 F2400.000
G1 X103.945 Y98.168 E0.00207 ; infill
G1 X104.028 Y98.130 F10800.000 ; move to first infill point
;WIDTH:0.104045
G1 F2400.000
G1 X103.883 Y98.293 E0.00111 ; infill
G1 X103.718 Y98.126 F10800.000 ; move to first infill point
;WIDTH:0.134744
G1 F2400.000
G1 X103.898 Y97.899 E0.00221 ; infill
;LAYER_CHANGE
;Z:27.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;27.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.718 Y98.126 E-0.07639 ; wipe and retract
;WIPE_END
G1 E-2.32361 F2400.000 ; retract
G1 Z27.675 F10800.000 ; lift Z
G1 Z27.800 ; move to next layer (138)
;AFTER_LAYER_CHANGE
;27.8
G1 Z27.875 ; lift Z
G1 X104.767 Y104.793 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X105.067 Y105.043 E0.01322 ; perimeter
G1 X104.871 Y105.184 E0.00815 ; perimeter
G1 X104.730 Y105.229 E0.00502 ; perimeter
G1 X104.777 Y105.020 E0.00726 ; perimeter
G1 X104.770 Y104.853 E0.00564 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.067 Y105.043 E-0.09313 ; wipe and retract
G1 X104.871 Y105.184 E-0.06350 ; wipe and retract
G1 X104.730 Y105.229 E-0.03910 ; wipe and retract
G1 X104.777 Y105.020 E-0.05663 ; wipe and retract
G1 X104.770 Y104.853 E-0.04400 ; wipe and retract
;WIPE_END
G1 E-2.10363 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X103.706 Y102.490 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.619 Y102.394 E0.00441 ; perimeter
G1 X103.353 Y102.316 E0.00936 ; perimeter
G1 X103.186 Y102.191 E0.00706 ; perimeter
G1 X103.073 Y102.198 E0.00385 ; perimeter
G1 X102.935 Y102.175 E0.00471 ; perimeter
G1 X102.898 Y102.084 E0.00334 ; perimeter
G1 X102.870 Y101.821 E0.00896 ; perimeter
G1 X103.167 Y102.055 E0.01282 ; perimeter
G1 X103.787 Y101.694 E0.02429 ; perimeter
G1 X103.740 Y101.892 E0.00691 ; perimeter
G1 X103.749 Y102.203 E0.01053 ; perimeter
G1 X103.715 Y102.430 E0.00777 ; perimeter
G1 X103.208 Y101.474 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X102.888 Y101.222 E0.01888 ; perimeter
G1 X102.766 Y101.046 E0.00992 ; perimeter
G1 X102.608 Y100.675 E0.01865 ; perimeter
G1 X102.539 Y100.171 E0.02359 ; perimeter
G1 X102.650 Y99.936 E0.01201 ; perimeter
G1 X102.934 Y99.643 E0.01892 ; perimeter
G1 X103.134 Y99.590 E0.00961 ; perimeter
G1 X103.522 Y99.586 E0.01793 ; perimeter
G1 X103.773 Y99.774 E0.01455 ; perimeter
G1 X103.998 Y100.224 E0.02328 ; perimeter
G1 X103.937 Y100.526 E0.01428 ; perimeter
G1 X103.942 Y100.710 E0.00855 ; perimeter
G1 X103.852 Y100.886 E0.00912 ; perimeter
G1 X103.781 Y101.140 E0.01222 ; perimeter
G1 X103.260 Y101.444 E0.02796 ; perimeter
G1 X102.944 Y101.774 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.888 Y101.222 E-0.11431 ; wipe and retract
G1 X102.766 Y101.046 E-0.05653 ; wipe and retract
G1 X102.608 Y100.675 E-0.10622 ; wipe and retract
G1 X102.539 Y100.171 E-0.13439 ; wipe and retract
G1 X102.650 Y99.936 E-0.06841 ; wipe and retract
G1 X102.934 Y99.643 E-0.10781 ; wipe and retract
G1 X103.134 Y99.590 E-0.05474 ; wipe and retract
G1 X103.522 Y99.586 E-0.10215 ; wipe and retract
G1 X103.773 Y99.774 E-0.08291 ; wipe and retract
G1 X103.998 Y100.224 E-0.13264 ; wipe and retract
G1 X103.937 Y100.526 E-0.08132 ; wipe and retract
G1 X103.942 Y100.710 E-0.04869 ; wipe and retract
G1 X103.852 Y100.886 E-0.05194 ; wipe and retract
G1 X103.781 Y101.140 E-0.06960 ; wipe and retract
G1 X103.260 Y101.444 E-0.15927 ; wipe and retract
;WIPE_END
G1 E-1.02906 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X103.235 Y99.107 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X103.070 Y99.109 E0.00558 ; perimeter
G1 X103.656 Y98.554 E0.02728 ; perimeter
G1 X103.669 Y98.841 E0.00973 ; perimeter
G1 X103.742 Y99.149 E0.01072 ; perimeter
G1 X103.680 Y99.102 E0.00266 ; perimeter
G1 X103.295 Y99.106 E0.01301 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.070 Y99.109 E-0.05931 ; wipe and retract
G1 X103.656 Y98.554 E-0.21271 ; wipe and retract
G1 X103.669 Y98.841 E-0.07583 ; wipe and retract
G1 X103.742 Y99.149 E-0.08356 ; wipe and retract
G1 X103.680 Y99.102 E-0.02070 ; wipe and retract
G1 X103.295 Y99.106 E-0.10146 ; wipe and retract
;WIPE_END
G1 E-1.84644 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X110.252 Y100.654 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X110.509 Y100.146 E0.01928 ; perimeter
G1 X110.864 Y100.462 E0.01610 ; perimeter
G1 X110.440 Y100.573 E0.01484 ; perimeter
G1 X110.307 Y100.630 E0.00491 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.509 Y100.146 E-0.13858 ; wipe and retract
G1 X110.864 Y100.462 E-0.12550 ; wipe and retract
G1 X110.440 Y100.573 E-0.11569 ; wipe and retract
G1 X110.307 Y100.630 E-0.03825 ; wipe and retract
;WIPE_END
G1 E-1.98197 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X105.360 Y104.660 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.991 Y104.352 E0.02227 ; perimeter
G1 X104.708 Y103.827 E0.02762 ; perimeter
G1 X104.187 Y102.537 E0.06444 ; perimeter
G1 X104.232 Y102.232 E0.01431 ; perimeter
G1 X104.223 Y101.943 E0.01340 ; perimeter
G1 X104.381 Y101.288 E0.03118 ; perimeter
G1 X104.678 Y100.834 E0.02515 ; perimeter
G1 X105.009 Y100.782 E0.01551 ; perimeter
G1 X105.399 Y100.765 E0.01811 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X105.621 Y100.791 E0.00933 ; perimeter (bridge)
G1 X106.130 Y100.999 E0.02298 ; perimeter (bridge)
G1 X107.160 Y101.340 E0.04534 ; perimeter (bridge)
G1 X107.311 Y101.417 E0.00710 ; perimeter (bridge)
G1 X107.709 Y101.556 E0.01763 ; perimeter (bridge)
G1 X108.026 Y101.874 E0.01874 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.123 Y101.971 E0.00638 ; perimeter
G1 X108.187 Y102.361 E0.01828 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1
G1 X108.320 Y103.172 E0.03436 ; perimeter (bridge)
G1 X108.326 Y103.310 E0.00577 ; perimeter (bridge)
G1 X108.384 Y103.545 E0.01011 ; perimeter (bridge)
G1 X108.344 Y103.966 E0.01767 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 X108.332 Y104.094 E0.00595 ; perimeter
G1 X108.268 Y104.331 E0.01138 ; perimeter
G1 X107.754 Y104.699 E0.02930 ; perimeter
G1 X106.965 Y104.733 E0.03655 ; perimeter
G1 X105.956 Y104.724 E0.04675 ; perimeter
G1 X105.420 Y104.667 E0.02499 ; perimeter
G1 X105.023 Y104.876 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.991 Y104.352 E-0.14032 ; wipe and retract
G1 X104.708 Y103.827 E-0.15735 ; wipe and retract
G1 X104.187 Y102.537 E-0.36712 ; wipe and retract
G1 X104.232 Y102.232 E-0.08154 ; wipe and retract
G1 X104.223 Y101.943 E-0.07636 ; wipe and retract
G1 X104.381 Y101.288 E-0.17763 ; wipe and retract
G1 X104.678 Y100.834 E-0.14326 ; wipe and retract
G1 X105.009 Y100.782 E-0.08837 ; wipe and retract
G1 X105.399 Y100.765 E-0.10318 ; wipe and retract
;WIPE_END
G1 E-1.06487 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X112.440 Y106.718 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X112.643 Y106.662 E0.00712 ; perimeter
G1 X112.506 Y106.786 E0.00623 ; perimeter
G1 X112.482 Y106.761 E0.00117 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.643 Y106.662 E-0.04977 ; wipe and retract
G1 X112.506 Y106.786 E-0.04856 ; wipe and retract
G1 X112.482 Y106.761 E-0.00911 ; wipe and retract
;WIPE_END
G1 E-2.29256 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X111.785 Y109.188 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.820 Y109.287 E0.00354 ; perimeter
G1 X111.658 Y109.227 E0.00585 ; perimeter
G1 X111.530 Y109.230 E0.00432 ; perimeter
G1 X111.726 Y109.198 E0.00672 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.820 Y109.287 E-0.03416 ; wipe and retract
G1 X111.658 Y109.227 E-0.04562 ; wipe and retract
G1 X111.530 Y109.230 E-0.03371 ; wipe and retract
G1 X111.726 Y109.198 E-0.05238 ; wipe and retract
;WIPE_END
G1 E-2.23413 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X114.472 Y111.856 ; move to first perimeter point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.518 Y111.894 E0.00202 ; perimeter
G1 X114.803 Y112.018 E0.01052 ; perimeter
G1 X115.274 Y112.309 E0.01874 ; perimeter
G1 X115.348 Y112.414 E0.00435 ; perimeter
G1 X115.388 Y112.548 E0.00473 ; perimeter
G1 X115.388 Y112.706 E0.00536 ; perimeter
G1 X115.347 Y113.043 E0.01147 ; perimeter
G1 X114.661 Y112.752 E0.02524 ; perimeter
G1 X114.319 Y112.756 E0.01157 ; perimeter
G1 X114.332 Y112.625 E0.00443 ; perimeter
G1 X114.410 Y112.335 E0.01019 ; perimeter
G1 X114.465 Y111.915 E0.01430 ; perimeter
G1 X114.997 Y113.409 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.569 Y113.235 E0.02141 ; perimeter
G1 X114.342 Y113.238 E0.01050 ; perimeter
G1 X114.087 Y113.276 E0.01192 ; perimeter
G1 X113.908 Y113.220 E0.00869 ; perimeter
G1 X113.866 Y113.160 E0.00338 ; perimeter
G1 X113.812 Y112.977 E0.00886 ; perimeter
G1 X113.856 Y112.538 E0.02044 ; perimeter
G1 X113.936 Y112.241 E0.01426 ; perimeter
G1 X113.993 Y111.802 E0.02049 ; perimeter
G1 X113.959 Y111.745 E0.00309 ; perimeter
G1 X113.978 Y111.555 E0.00884 ; perimeter
G1 X113.679 Y111.217 E0.02090 ; perimeter
G1 X113.124 Y110.719 E0.03454 ; perimeter
G1 X112.108 Y109.907 E0.06025 ; perimeter
G1 X111.578 Y109.711 E0.02617 ; perimeter
G1 X111.113 Y109.724 E0.02152 ; perimeter
G1 X110.340 Y109.669 E0.03593 ; perimeter
G1 X109.900 Y109.529 E0.02137 ; perimeter
G1 X109.607 Y109.331 E0.01641 ; perimeter
G1 X109.587 Y109.242 E0.00422 ; perimeter
G1 X109.612 Y109.188 E0.00274 ; perimeter
G1 X109.757 Y109.079 E0.00840 ; perimeter
G1 X110.050 Y108.964 E0.01459 ; perimeter
G1 X110.645 Y108.881 E0.02783 ; perimeter
G1 X111.229 Y108.852 E0.02706 ; perimeter
G1 X111.351 Y108.770 E0.00682 ; perimeter
G1 X111.591 Y108.731 E0.01127 ; perimeter
G1 X111.892 Y108.177 E0.02920 ; perimeter
G1 X111.998 Y107.779 E0.01909 ; perimeter
G1 X112.103 Y107.063 E0.03355 ; perimeter
G1 X111.671 Y106.621 E0.02861 ; perimeter
G1 X110.820 Y106.182 E0.04438 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X110.088 Y105.804 E0.03444 ; perimeter (bridge)
G1 X109.757 Y105.601 E0.01619 ; perimeter (bridge)
G1 X109.490 Y105.508 E0.01185 ; perimeter (bridge)
G1 X108.956 Y105.268 E0.02446 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X108.544 Y105.207 E0.01929 ; perimeter
G1 X108.039 Y105.196 E0.02341 ; perimeter
G1 X105.778 Y105.412 E0.10517 ; perimeter
G1 X105.250 Y105.501 E0.02481 ; perimeter
G1 X105.098 Y105.617 E0.00888 ; perimeter
G1 X104.756 Y105.740 E0.01682 ; perimeter
G1 X104.579 Y105.772 E0.00834 ; perimeter
G1 X104.383 Y105.744 E0.00917 ; perimeter
G1 X104.337 Y105.721 E0.00238 ; perimeter
G1 X104.248 Y105.613 E0.00648 ; perimeter
G1 X104.226 Y105.511 E0.00484 ; perimeter
G1 X104.228 Y105.270 E0.01117 ; perimeter
G1 X104.292 Y104.977 E0.01389 ; perimeter
G1 X104.276 Y104.596 E0.01767 ; perimeter
G1 X104.211 Y104.407 E0.00926 ; perimeter
G1 X103.839 Y103.529 E0.04417 ; perimeter
G1 X103.582 Y103.069 E0.02442 ; perimeter
G1 X103.353 Y102.818 E0.01572 ; perimeter
G1 X103.135 Y102.754 E0.01055 ; perimeter
G1 X103.039 Y102.683 E0.00553 ; perimeter
G1 X102.905 Y102.691 E0.00619 ; perimeter
G1 X102.861 Y102.652 E0.00271 ; perimeter
G1 X102.656 Y102.629 E0.00955 ; perimeter
G1 X102.557 Y102.526 E0.00661 ; perimeter
G1 X102.426 Y102.203 E0.01615 ; perimeter
G1 X102.371 Y101.688 E0.02398 ; perimeter
G1 X102.227 Y101.317 E0.01843 ; perimeter
G1 X101.914 Y100.284 E0.05001 ; perimeter
G1 X101.872 Y100.027 E0.01206 ; perimeter
G1 X101.865 Y99.758 E0.01247 ; perimeter
G1 X101.896 Y99.626 E0.00628 ; perimeter
G1 X102.173 Y99.284 E0.02040 ; perimeter
G1 X102.347 Y99.169 E0.00962 ; perimeter
G1 X102.820 Y98.673 E0.03178 ; perimeter
G1 X103.332 Y98.197 E0.03241 ; perimeter
G1 X103.501 Y97.943 E0.01410 ; perimeter
G1 X103.768 Y97.683 E0.01725 ; perimeter
G1 X104.028 Y97.094 E0.02986 ; perimeter
G1 X104.225 Y96.970 E0.01075 ; perimeter
G1 X104.379 Y96.952 E0.00717 ; perimeter
G1 X105.526 Y97.056 E0.05334 ; perimeter
G1 X105.736 Y97.104 E0.00998 ; perimeter
G1 X105.729 Y97.136 E0.00151 ; perimeter
G1 X105.186 Y97.485 E0.02995 ; perimeter
G1 X104.862 Y97.636 E0.01653 ; perimeter
G1 X104.622 Y97.834 E0.01444 ; perimeter
G1 X104.326 Y98.160 E0.02038 ; perimeter
G1 X104.139 Y98.564 E0.02062 ; perimeter
G1 X104.149 Y98.773 E0.00972 ; perimeter
G1 X104.223 Y99.084 E0.01480 ; perimeter
G1 X104.423 Y99.605 E0.02584 ; perimeter
G1 X104.624 Y99.988 E0.02004 ; perimeter
G1 X104.884 Y100.110 E0.01330 ; perimeter
G1 X104.962 Y100.179 E0.00482 ; perimeter
G1 X105.318 Y100.278 E0.01712 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X105.964 Y100.545 E0.02920 ; perimeter (bridge)
G1 X106.432 Y100.682 E0.02037 ; perimeter (bridge)
G1 X107.134 Y100.930 E0.03113 ; perimeter (bridge)
G1 X107.444 Y101.077 E0.01435 ; perimeter (bridge)
G1 X107.843 Y101.165 E0.01708 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X108.049 Y101.210 E0.00975 ; perimeter
G1 X108.230 Y101.214 E0.00840 ; perimeter
G1 X108.702 Y101.069 E0.02287 ; perimeter
G1 X109.364 Y100.727 E0.03454 ; perimeter
G1 X109.774 Y100.477 E0.02225 ; perimeter
G1 X109.863 Y100.367 E0.00652 ; perimeter
G1 X110.045 Y99.997 E0.01912 ; perimeter
G1 X109.906 Y99.285 E0.03362 ; perimeter
G1 X109.829 Y99.111 E0.00877 ; perimeter
G1 X109.843 Y99.085 E0.00141 ; perimeter
G1 X109.903 Y99.098 E0.00283 ; perimeter
G1 X110.380 Y99.385 E0.02577 ; perimeter
G1 X111.517 Y100.399 E0.07058 ; perimeter
G1 X111.699 Y100.615 E0.01309 ; perimeter
G1 X111.760 Y100.782 E0.00824 ; perimeter
G1 X111.684 Y100.875 E0.00558 ; perimeter
G1 X111.495 Y100.898 E0.00883 ; perimeter
G1 X111.335 Y100.943 E0.00766 ; perimeter
G1 X110.943 Y100.940 E0.01817 ; perimeter
G1 X110.597 Y101.031 E0.01658 ; perimeter
G1 X110.245 Y101.181 E0.01772 ; perimeter
G1 X110.027 Y101.243 E0.01051 ; perimeter
G1 X109.244 Y101.529 E0.03861 ; perimeter
G1 X108.760 Y101.866 E0.02731 ; perimeter
G1 X108.685 Y102.029 E0.00830 ; perimeter
G1 X108.672 Y102.150 E0.00563 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X108.604 Y102.748 E0.02516 ; perimeter (bridge)
G1 X108.733 Y103.289 E0.02326 ; perimeter (bridge)
G1 X108.829 Y103.929 E0.02706 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X108.884 Y104.242 E0.01473 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X109.061 Y104.677 E0.01960 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X109.119 Y104.839 E0.00797 ; perimeter
G1 X109.205 Y104.884 E0.00452 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X109.779 Y105.186 E0.02709 ; perimeter (bridge)
G1 X111.147 Y105.845 E0.06346 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X111.728 Y106.094 E0.02930 ; perimeter
G1 X112.338 Y106.246 E0.02912 ; perimeter
G1 X112.925 Y106.085 E0.02819 ; perimeter
G1 X113.168 Y105.949 E0.01293 ; perimeter
G1 X113.568 Y105.798 E0.01978 ; perimeter
G1 X113.979 Y105.775 E0.01911 ; perimeter
G1 X114.105 Y105.836 E0.00649 ; perimeter
G1 X114.081 Y106.036 E0.00930 ; perimeter
G1 X113.987 Y106.202 E0.00887 ; perimeter
G1 X113.632 Y106.565 E0.02352 ; perimeter
G1 X113.016 Y106.975 E0.03426 ; perimeter
G1 X112.751 Y107.214 E0.01654 ; perimeter
G1 X112.651 Y107.414 E0.01037 ; perimeter
G1 X112.301 Y108.478 E0.05187 ; perimeter
G1 X112.298 Y108.641 E0.00754 ; perimeter
G1 X112.240 Y109.027 E0.01810 ; perimeter
G1 X112.404 Y109.493 E0.02288 ; perimeter
G1 X112.739 Y109.825 E0.02185 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X112.826 Y109.898 E0.00474 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X113.015 Y110.044 E0.01109 ; perimeter
;TYPE:Overhang perimeter
;WIDTH:0.357771
;HEIGHT:0.357771
M106 S63.75 ; enable fan
G1 F1800.000
G1 X113.230 Y110.231 E0.01190 ; perimeter (bridge)
M107 ; disable fan
;TYPE:External perimeter
;WIDTH:0.6
;HEIGHT:0.2
G1 F2400.000
G1 X113.348 Y110.344 E0.00760 ; perimeter
G1 X113.650 Y110.550 E0.01690 ; perimeter
G1 X114.773 Y111.479 E0.06756 ; perimeter
G1 X115.036 Y111.594 E0.01327 ; perimeter
G1 X115.214 Y111.714 E0.00993 ; perimeter
G1 X115.449 Y111.835 E0.01228 ; perimeter
G1 X115.627 Y111.972 E0.01039 ; perimeter
G1 X115.775 Y112.184 E0.01197 ; perimeter
G1 X115.870 Y112.491 E0.01489 ; perimeter
G1 X115.870 Y112.735 E0.01132 ; perimeter
G1 X115.803 Y113.291 E0.02595 ; perimeter
G1 X115.759 Y113.510 E0.01034 ; perimeter
G1 X115.602 Y113.919 E0.02028 ; perimeter
G1 X115.530 Y114.043 E0.00665 ; perimeter
G1 X115.379 Y114.137 E0.00824 ; perimeter
G1 X115.325 Y114.067 E0.00413 ; perimeter
G1 X115.240 Y113.865 E0.01015 ; perimeter
G1 X115.025 Y113.462 E0.02114 ; perimeter
G1 X115.038 Y113.012 F10800.000 ; move inwards before travel
G1 X115.060 Y112.566 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.300457
G1 F2400.000
G1 X114.755 Y112.410 E0.00734 ; infill
G1 X114.281 Y111.454 F10800.000 ; move to first infill point
;WIDTH:0.139685
G1 F2400.000
G1 X114.019 Y111.200 E0.00294 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.281 Y111.454 E-0.09636 ; wipe and retract
;WIPE_END
G1 E-2.30364 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X109.996 Y109.303 ; move to first infill point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.347826
G1 F2400.000
G1 X110.338 Y109.294 E0.00867 ; infill
;WIDTH:0.373529
G1 X110.680 Y109.286 E0.00940 ; infill
;WIDTH:0.42308
G1 X111.097 Y109.290 E0.01318 ; infill
G1 X111.334 Y109.477 E0.00954 ; infill
G1 X111.984 Y108.966 F10800.000 ; move to first infill point
;WIDTH:0.112825
G1 F2400.000
G1 X111.979 Y108.907 E0.00035 ; infill
;WIDTH:0.152627
G1 X111.963 Y108.880 E0.00029 ; infill
;WIDTH:0.192428
G1 X111.947 Y108.852 E0.00039 ; infill
;WIDTH:0.201111
G1 X111.928 Y108.822 E0.00047 ; infill
G1 X112.051 Y108.456 E0.00508 ; infill
G1 X112.279 Y107.696 F10800.000 ; move to first infill point
;WIDTH:0.12927
G1 F2400.000
G1 X112.325 Y107.500 E0.00145 ; infill
;WIDTH:0.163742
G1 X112.374 Y107.296 E0.00211 ; infill
;WIDTH:0.209229
G1 X112.445 Y107.068 E0.00330 ; infill
G1 X112.147 Y106.548 F10800.000 ; move to first infill point
;WIDTH:0.10533
G1 F2400.000
G1 X111.786 Y106.382 E0.00206 ; infill
G1 X112.859 Y106.556 F10800.000 ; move to first infill point
;WIDTH:0.33366
G1 F2400.000
G1 X113.059 Y106.464 E0.00532 ; infill
G1 X113.332 Y106.300 E0.00770 ; infill
G1 X113.779 Y106.070 E0.01213 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.332 Y106.300 E-0.13243 ; wipe and retract
G1 X113.059 Y106.464 E-0.08407 ; wipe and retract
G1 X112.859 Y106.556 E-0.05804 ; wipe and retract
;WIPE_END
G1 E-2.12546 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X111.392 Y100.624 ; move to first infill point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.144491
G1 F2400.000
G1 X111.090 Y100.676 E0.00259 ; infill
G1 X110.173 Y100.950 F10800.000 ; move to first infill point
;WIDTH:0.358564
G1 F2400.000
G1 X109.909 Y100.862 E0.00732 ; infill
G1 X109.721 Y100.952 E0.00546 ; infill
;WIDTH:0.317079
G1 X109.544 Y101.038 E0.00449 ; infill
;WIDTH:0.278132
G1 X109.319 Y101.136 E0.00480 ; infill
;WIDTH:0.246738
G1 X109.102 Y101.232 E0.00402 ; infill
;WIDTH:0.216757
G1 X108.707 Y101.453 E0.00654 ; infill
;WIDTH:0.338575
G1 X108.432 Y101.595 E0.00762 ; infill
;WIDTH:0.434492
G1 X108.391 Y101.622 E0.00158 ; infill
G1 X108.451 Y101.962 E0.01125 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.391 Y101.622 E-0.09117 ; wipe and retract
G1 X108.432 Y101.595 E-0.01282 ; wipe and retract
;WIPE_END
G1 E-2.29601 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X108.582 Y104.131 ; move to first infill point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.16118
G1 F2400.000
G1 X108.585 Y104.310 E0.00176 ; infill
;WIDTH:0.16969
G1 X108.592 Y104.396 E0.00091 ; infill
G1 X108.313 Y104.788 F10800.000 ; move to first infill point
;WIDTH:0.184653
G1 F2400.000
G1 X107.847 Y104.947 E0.00581 ; infill
G1 X107.527 Y104.976 F10800.000 ; move to first infill point
;WIDTH:0.124689
G1 F2400.000
G1 X106.284 Y105.044 E0.00847 ; infill
;WIDTH:0.231014
G1 X105.471 Y105.066 E0.01272 ; infill
G1 X104.483 Y104.151 F10800.000 ; move to first infill point
;WIDTH:0.263415
G1 F2400.000
G1 X104.401 Y103.978 E0.00351 ; infill
;WIDTH:0.245453
G1 X104.154 Y103.382 E0.01087 ; infill
G1 X103.897 Y102.846 E0.01001 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.154 Y103.382 E-0.15678 ; wipe and retract
G1 X104.401 Y103.978 E-0.17026 ; wipe and retract
;WIPE_END
G1 E-2.07296 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X102.523 Y101.233 ; move to first infill point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.109816
G1 F2400.000
G1 X102.341 Y100.744 E0.00290 ; infill
;WIDTH:0.15266
G1 X102.282 Y100.478 E0.00249 ; infill
;WIDTH:0.197337
G1 X102.214 Y100.143 E0.00439 ; infill
;WIDTH:0.212347
G1 X102.213 Y99.617 E0.00741 ; infill
G1 X102.278 Y99.537 F10800.000 ; move to first infill point
;WIDTH:0.118102
G1 F2400.000
G1 X102.798 Y99.390 E0.00338 ; infill
G1 X102.910 Y99.375 E0.00071 ; infill
G1 X102.717 Y99.354 F10800.000 ; move to first infill point
;WIDTH:0.353582
G1 F2400.000
G1 X102.442 Y99.581 E0.00921 ; infill
G1 X102.342 Y99.694 E0.00390 ; infill
;WIDTH:0.343873
G1 X102.268 Y99.805 E0.00334 ; infill
G1 X102.114 Y99.753 E0.00407 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X102.268 Y99.805 E-0.04294 ; wipe and retract
G1 X102.342 Y99.694 E-0.03519 ; wipe and retract
;WIPE_END
G1 E-2.32187 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 X105.035 Y100.449 ; move to first infill point
G1 Z27.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.464332
G1 F2400.000
G1 X104.434 Y100.412 E0.02110 ; infill
G1 X104.406 Y100.461 E0.00198 ; infill
;WIDTH:0.453775
G1 X104.378 Y100.510 E0.00193 ; infill
;WIDTH:0.417488
G1 X104.076 Y101.247 E0.02480 ; infill
G1 X104.152 Y101.203 F10800.000 ; move to first infill point
;WIDTH:0.135465
G1 F2400.000
G1 X104.125 Y101.178 E0.00028 ; infill
;WIDTH:0.180337
G1 X104.099 Y101.154 E0.00041 ; infill
;WIDTH:0.229127
G1 X104.165 Y101.008 E0.00248 ; infill
;WIDTH:0.252606
G1 X104.278 Y100.814 E0.00392 ; infill
;WIDTH:0.272214
G1 X104.532 Y100.211 E0.01247 ; infill
G1 X104.214 Y100.372 F10800.000 ; move to first infill point
;WIDTH:0.245076
G1 F2400.000
G1 X105.122 Y100.533 E0.01550 ; infill
G1 X105.163 Y100.508 F10800.000 ; move to first infill point
;WIDTH:0.123159
G1 F2400.000
G1 X104.203 Y100.426 E0.00642 ; infill
G1 X104.500 Y100.664 F10800.000 ; move to first infill point
;WIDTH:0.350032
G1 F2400.000
G1 X104.427 Y100.443 E0.00596 ; infill
;WIDTH:0.303494
G1 X104.354 Y100.221 E0.00505 ; infill
;WIDTH:0.256954
G1 X104.352 Y100.210 E0.00020 ; infill
;WIDTH:0.249429
G1 X104.333 Y100.149 E0.00111 ; infill
;WIDTH:0.226356
G1 X104.165 Y99.823 E0.00559 ; infill
G1 X103.997 Y97.981 F10800.000 ; move to first infill point
;WIDTH:0.298341
G1 F2400.000
G1 X104.083 Y97.879 E0.00284 ; infill
;WIDTH:0.340178
G1 X104.160 Y97.763 E0.00343 ; infill
;WIDTH:0.382015
G1 X104.237 Y97.647 E0.00392 ; infill
;WIDTH:0.423853
G1 X104.314 Y97.532 E0.00440 ; infill
;WIDTH:0.434166
G1 X104.545 Y97.209 E0.01290 ; infill
G1 X105.015 Y97.252 F10800.000 ; move to first infill point
;WIDTH:0.280543
G1 F2400.000
G1 X104.135 Y97.465 E0.01789 ; infill
;LAYER_CHANGE
;Z:28
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;28
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.015 Y97.252 E-0.23887 ; wipe and retract
;WIPE_END
G1 E-2.16113 F2400.000 ; retract
G1 Z27.875 F10800.000 ; lift Z
G1 Z28.000 ; move to next layer (139)
;AFTER_LAYER_CHANGE
;28
G1 Z28.075 ; lift Z
G1 X104.758 Y104.722 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X105.220 Y105.057 E0.01930 ; perimeter
G1 X104.901 Y105.156 E0.01131 ; perimeter
G1 X104.812 Y105.166 E0.00302 ; perimeter
G1 X104.824 Y105.040 E0.00428 ; perimeter
G1 X104.770 Y104.781 E0.00896 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X105.220 Y105.057 E-0.13918 ; wipe and retract
G1 X104.901 Y105.156 E-0.08818 ; wipe and retract
G1 X104.812 Y105.166 E-0.02357 ; wipe and retract
G1 X104.824 Y105.040 E-0.03337 ; wipe and retract
G1 X104.770 Y104.781 E-0.06982 ; wipe and retract
;WIPE_END
G1 E-2.04587 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X103.732 Y102.496 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.237 Y102.125 E0.02093 ; perimeter
G1 X103.197 Y102.128 E0.00137 ; perimeter
G1 X103.129 Y102.069 E0.00302 ; perimeter
G1 X103.102 Y102.004 E0.00240 ; perimeter
G1 X103.825 Y101.731 E0.02615 ; perimeter
G1 X103.846 Y101.701 E0.00122 ; perimeter
G1 X103.740 Y102.437 E0.02516 ; perimeter
G1 X104.217 Y102.510 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X104.326 Y101.749 E0.03559 ; perimeter
G1 X104.485 Y101.239 E0.02477 ; perimeter
G1 X104.622 Y101.028 E0.01166 ; perimeter
G1 X104.960 Y100.872 E0.01723 ; perimeter
G1 X105.519 Y100.942 E0.02610 ; perimeter
G1 X106.407 Y101.217 E0.04305 ; perimeter
G1 X106.889 Y101.417 E0.02419 ; perimeter
G1 X107.138 Y101.463 E0.01172 ; perimeter
G1 X107.695 Y101.749 E0.02900 ; perimeter
G1 X107.776 Y101.865 E0.00656 ; perimeter
G1 X108.015 Y102.099 E0.01549 ; perimeter
G1 X108.109 Y102.594 E0.02335 ; perimeter
G1 X108.259 Y103.895 E0.06069 ; perimeter
G1 X108.075 Y104.354 E0.02289 ; perimeter
G1 X107.911 Y104.428 E0.00831 ; perimeter
G1 X107.649 Y104.618 E0.01501 ; perimeter
G1 X106.830 Y104.667 E0.03804 ; perimeter
G1 X106.492 Y104.666 E0.01562 ; perimeter
G1 X105.969 Y104.649 E0.02426 ; perimeter
G1 X105.391 Y104.590 E0.02690 ; perimeter
G1 X105.001 Y104.302 E0.02246 ; perimeter
G1 X104.720 Y103.709 E0.03042 ; perimeter
G1 X104.240 Y102.565 E0.05744 ; perimeter
G1 X103.862 Y102.325 F10800.000 ; move inwards before travel
G1 X104.358 Y100.619 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.351 Y100.139 E0.01625 ; perimeter
G1 X104.719 Y100.452 E0.01635 ; perimeter
G1 X104.412 Y100.594 E0.01146 ; perimeter
G1 X103.773 Y99.184 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.234 Y99.065 E0.01868 ; perimeter
G1 X103.345 Y98.892 E0.00694 ; perimeter
G1 X103.654 Y98.561 E0.01531 ; perimeter
G1 X103.696 Y98.974 E0.01406 ; perimeter
G1 X103.752 Y99.127 E0.00551 ; perimeter
G1 X103.574 Y99.633 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X103.868 Y100.076 E0.02466 ; perimeter
G1 X103.875 Y100.582 E0.02342 ; perimeter
G1 X103.736 Y100.853 E0.01410 ; perimeter
G1 X103.676 Y101.092 E0.01140 ; perimeter
G1 X103.512 Y101.334 E0.01356 ; perimeter
G1 X102.892 Y101.568 E0.03070 ; perimeter
G1 X102.390 Y100.833 E0.04120 ; perimeter
G1 X102.270 Y100.462 E0.01807 ; perimeter
G1 X102.375 Y100.042 E0.02008 ; perimeter
G1 X102.726 Y99.646 E0.02449 ; perimeter
G1 X103.109 Y99.531 E0.01851 ; perimeter
G1 X103.515 Y99.620 E0.01927 ; perimeter
G1 X103.943 Y99.479 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.868 Y100.076 E-0.15228 ; wipe and retract
G1 X103.875 Y100.582 E-0.13343 ; wipe and retract
G1 X103.736 Y100.853 E-0.08033 ; wipe and retract
G1 X103.676 Y101.092 E-0.06493 ; wipe and retract
G1 X103.512 Y101.334 E-0.07723 ; wipe and retract
G1 X102.892 Y101.568 E-0.17489 ; wipe and retract
G1 X102.390 Y100.833 E-0.23471 ; wipe and retract
G1 X102.270 Y100.462 E-0.10293 ; wipe and retract
G1 X102.375 Y100.042 E-0.11439 ; wipe and retract
G1 X102.726 Y99.646 E-0.13954 ; wipe and retract
G1 X103.109 Y99.531 E-0.10543 ; wipe and retract
G1 X103.515 Y99.620 E-0.10981 ; wipe and retract
;WIPE_END
G1 E-0.91011 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X110.347 Y100.593 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X110.552 Y100.357 E0.01058 ; perimeter
G1 X110.687 Y100.468 E0.00593 ; perimeter
G1 X110.578 Y100.524 E0.00415 ; perimeter
G1 X110.405 Y100.576 E0.00611 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.552 Y100.357 E-0.06964 ; wipe and retract
G1 X110.687 Y100.468 E-0.04620 ; wipe and retract
G1 X110.578 Y100.524 E-0.03235 ; wipe and retract
G1 X110.405 Y100.576 E-0.04763 ; wipe and retract
;WIPE_END
G1 E-2.20418 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X108.537 Y101.512 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.411 Y101.812 E0.01099 ; perimeter
G1 X108.132 Y101.532 E0.01337 ; perimeter
G1 X108.300 Y101.544 E0.00570 ; perimeter
G1 X108.478 Y101.520 E0.00608 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.411 Y101.812 E-0.07884 ; wipe and retract
G1 X108.132 Y101.532 E-0.10424 ; wipe and retract
G1 X108.300 Y101.544 E-0.04441 ; wipe and retract
G1 X108.478 Y101.520 E-0.04738 ; wipe and retract
;WIPE_END
G1 E-2.12513 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X108.582 Y104.384 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.743 Y104.852 E0.01672 ; perimeter
G1 X108.677 Y104.831 E0.00234 ; perimeter
G1 X108.181 Y104.835 E0.01679 ; perimeter
G1 X108.450 Y104.715 E0.00998 ; perimeter
G1 X108.560 Y104.440 E0.01001 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.743 Y104.852 E-0.11885 ; wipe and retract
G1 X108.677 Y104.831 E-0.01824 ; wipe and retract
G1 X108.181 Y104.835 E-0.13089 ; wipe and retract
G1 X108.450 Y104.715 E-0.07783 ; wipe and retract
G1 X108.560 Y104.440 E-0.07801 ; wipe and retract
;WIPE_END
G1 E-1.97618 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X112.208 Y106.663 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.360 Y106.719 E0.00547 ; perimeter
G1 X112.787 Y106.617 E0.01485 ; perimeter
G1 X112.477 Y106.905 E0.01429 ; perimeter
G1 X112.451 Y106.962 E0.00214 ; perimeter
G1 X112.246 Y106.710 E0.01102 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.360 Y106.719 E-0.03016 ; wipe and retract
G1 X112.787 Y106.617 E-0.11574 ; wipe and retract
G1 X112.477 Y106.905 E-0.11140 ; wipe and retract
G1 X112.451 Y106.962 E-0.01668 ; wipe and retract
G1 X112.246 Y106.710 E-0.08595 ; wipe and retract
;WIPE_END
G1 E-2.04006 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X111.880 Y108.941 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.873 Y109.040 E0.00336 ; perimeter
G1 X112.008 Y109.420 E0.01365 ; perimeter
G1 X111.756 Y109.327 E0.00908 ; perimeter
G1 X111.615 Y109.328 E0.00476 ; perimeter
G1 X111.364 Y109.268 E0.00875 ; perimeter
G1 X111.403 Y109.266 E0.00132 ; perimeter
G1 X111.830 Y108.975 E0.01750 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.873 Y109.040 E-0.02055 ; wipe and retract
G1 X112.008 Y109.420 E-0.10638 ; wipe and retract
G1 X111.756 Y109.327 E-0.07082 ; wipe and retract
G1 X111.615 Y109.328 E-0.03708 ; wipe and retract
G1 X111.364 Y109.268 E-0.06823 ; wipe and retract
G1 X111.403 Y109.266 E-0.01025 ; wipe and retract
G1 X111.830 Y108.975 E-0.13641 ; wipe and retract
;WIPE_END
G1 E-1.95027 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X114.440 Y111.673 ; move to first perimeter point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.872 Y112.001 E0.01833 ; perimeter
G1 X114.993 Y112.134 E0.00611 ; perimeter
G1 X115.148 Y112.252 E0.00660 ; perimeter
G1 X115.298 Y112.461 E0.00868 ; perimeter
G1 X115.334 Y112.649 E0.00649 ; perimeter
G1 X115.325 Y112.721 E0.00247 ; perimeter
G1 X114.888 Y112.479 E0.01693 ; perimeter
G1 X114.418 Y112.491 E0.01590 ; perimeter
G1 X114.412 Y112.432 E0.00201 ; perimeter
G1 X114.499 Y112.098 E0.01166 ; perimeter
G1 X114.416 Y111.859 E0.00857 ; perimeter
G1 X114.433 Y111.733 E0.00432 ; perimeter
G1 X115.162 Y113.182 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.769 Y112.964 E0.02083 ; perimeter
G1 X114.097 Y112.965 E0.03111 ; perimeter
G1 X114.009 Y112.899 E0.00510 ; perimeter
G1 X113.952 Y112.750 E0.00738 ; perimeter
G1 X113.956 Y112.641 E0.00504 ; perimeter
G1 X113.924 Y112.470 E0.00806 ; perimeter
G1 X113.936 Y112.346 E0.00577 ; perimeter
G1 X113.996 Y112.118 E0.01096 ; perimeter
G1 X113.924 Y111.909 E0.01021 ; perimeter
G1 X113.943 Y111.758 E0.00706 ; perimeter
G1 X113.770 Y111.472 E0.01549 ; perimeter
G1 X113.368 Y111.093 E0.02562 ; perimeter
G1 X112.943 Y110.736 E0.02569 ; perimeter
G1 X112.877 Y110.636 E0.00555 ; perimeter
G1 X111.862 Y109.880 E0.05864 ; perimeter
G1 X111.672 Y109.810 E0.00936 ; perimeter
G1 X111.561 Y109.811 E0.00514 ; perimeter
G1 X111.186 Y109.722 E0.01787 ; perimeter
G1 X110.795 Y109.695 E0.01816 ; perimeter
G1 X110.535 Y109.625 E0.01246 ; perimeter
G1 X110.260 Y109.519 E0.01367 ; perimeter
G1 X110.023 Y109.344 E0.01363 ; perimeter
G1 X110.001 Y109.248 E0.00458 ; perimeter
G1 X110.028 Y109.193 E0.00283 ; perimeter
G1 X110.176 Y109.084 E0.00854 ; perimeter
G1 X110.533 Y108.955 E0.01757 ; perimeter
G1 X110.920 Y108.879 E0.01825 ; perimeter
G1 X111.072 Y108.806 E0.00783 ; perimeter
G1 X111.239 Y108.794 E0.00774 ; perimeter
G1 X111.557 Y108.578 E0.01782 ; perimeter
G1 X111.807 Y108.054 E0.02688 ; perimeter
G1 X111.925 Y107.641 E0.01989 ; perimeter
G1 X111.971 Y107.136 E0.02352 ; perimeter
G1 X111.677 Y106.775 E0.02154 ; perimeter
G1 X111.354 Y106.551 E0.01821 ; perimeter
G1 X110.919 Y106.370 E0.02184 ; perimeter
G1 X110.231 Y105.981 E0.03659 ; perimeter
G1 X109.988 Y105.914 E0.01170 ; perimeter
G1 X109.076 Y105.462 E0.04715 ; perimeter
G1 X108.605 Y105.314 E0.02288 ; perimeter
G1 X107.923 Y105.319 E0.03157 ; perimeter
G1 X106.700 Y105.414 E0.05681 ; perimeter
G1 X106.018 Y105.444 E0.03163 ; perimeter
G1 X105.711 Y105.498 E0.01445 ; perimeter
G1 X105.370 Y105.515 E0.01579 ; perimeter
G1 X105.000 Y105.631 E0.01797 ; perimeter
G1 X104.722 Y105.661 E0.01296 ; perimeter
G1 X104.515 Y105.625 E0.00970 ; perimeter
G1 X104.440 Y105.582 E0.00404 ; perimeter
G1 X104.376 Y105.501 E0.00477 ; perimeter
G1 X104.318 Y105.275 E0.01079 ; perimeter
G1 X104.337 Y105.067 E0.00965 ; perimeter
G1 X104.237 Y104.581 E0.02301 ; perimeter
G1 X104.065 Y104.146 E0.02167 ; perimeter
G1 X103.721 Y103.388 E0.03854 ; perimeter
G1 X103.368 Y102.824 E0.03084 ; perimeter
G1 X103.090 Y102.617 E0.01606 ; perimeter
G1 X103.030 Y102.620 E0.00281 ; perimeter
G1 X102.857 Y102.471 E0.01054 ; perimeter
G1 X102.791 Y102.455 E0.00316 ; perimeter
G1 X102.737 Y102.384 E0.00412 ; perimeter
G1 X102.612 Y102.079 E0.01528 ; perimeter
G1 X102.361 Y101.122 E0.04581 ; perimeter
G1 X102.414 Y100.900 E0.01058 ; perimeter
G1 X102.311 Y100.838 E0.00555 ; perimeter
G1 X102.261 Y100.434 E0.01885 ; perimeter
G1 X102.167 Y100.155 E0.01367 ; perimeter
G1 X102.111 Y99.865 E0.01367 ; perimeter
G1 X102.247 Y99.611 E0.01334 ; perimeter
G1 X102.279 Y99.447 E0.00772 ; perimeter
G1 X102.519 Y99.100 E0.01956 ; perimeter
G1 X102.881 Y98.736 E0.02380 ; perimeter
G1 X102.948 Y98.611 E0.00656 ; perimeter
G1 X103.213 Y98.321 E0.01819 ; perimeter
G1 X103.591 Y97.938 E0.02488 ; perimeter
G1 X103.692 Y97.866 E0.00580 ; perimeter
G1 X104.094 Y97.426 E0.02756 ; perimeter
G1 X104.288 Y97.352 E0.00964 ; perimeter
G1 X104.852 Y97.392 E0.02617 ; perimeter
G1 X104.668 Y97.605 E0.01301 ; perimeter
G1 X104.405 Y97.854 E0.01680 ; perimeter
G1 X104.369 Y97.982 E0.00614 ; perimeter
G1 X104.175 Y98.229 E0.01456 ; perimeter
G1 X104.135 Y98.529 E0.01401 ; perimeter
G1 X104.169 Y98.865 E0.01564 ; perimeter
G1 X104.293 Y99.199 E0.01652 ; perimeter
G1 X104.488 Y99.535 E0.01801 ; perimeter
G1 X104.731 Y99.842 E0.01815 ; perimeter
G1 X105.045 Y100.095 E0.01866 ; perimeter
G1 X105.576 Y100.230 E0.02536 ; perimeter
G1 X107.142 Y100.794 E0.07711 ; perimeter
G1 X107.906 Y101.033 E0.03706 ; perimeter
G1 X108.284 Y101.060 E0.01758 ; perimeter
G1 X108.697 Y101.004 E0.01929 ; perimeter
G1 X109.015 Y100.835 E0.01666 ; perimeter
G1 X109.780 Y100.513 E0.03845 ; perimeter
G1 X110.138 Y100.099 E0.02536 ; perimeter
G1 X110.292 Y99.640 E0.02245 ; perimeter
G1 X110.649 Y99.812 E0.01833 ; perimeter
G1 X111.269 Y100.324 E0.03725 ; perimeter
G1 X111.432 Y100.576 E0.01395 ; perimeter
G1 X111.441 Y100.633 E0.00266 ; perimeter
G1 X111.328 Y100.760 E0.00784 ; perimeter
G1 X110.961 Y100.869 E0.01773 ; perimeter
G1 X110.758 Y100.973 E0.01056 ; perimeter
G1 X110.403 Y101.080 E0.01717 ; perimeter
G1 X110.025 Y101.271 E0.01964 ; perimeter
G1 X109.486 Y101.480 E0.02678 ; perimeter
G1 X108.925 Y101.833 E0.03068 ; perimeter
G1 X108.759 Y102.228 E0.01987 ; perimeter
G1 X108.720 Y102.577 E0.01626 ; perimeter
G1 X108.837 Y103.029 E0.02163 ; perimeter
G1 X108.970 Y104.029 E0.04671 ; perimeter
G1 X109.202 Y104.704 E0.03305 ; perimeter
G1 X109.684 Y105.005 E0.02633 ; perimeter
G1 X110.050 Y105.162 E0.01845 ; perimeter
G1 X111.876 Y106.028 E0.09365 ; perimeter
G1 X112.389 Y106.216 E0.02531 ; perimeter
G1 X112.895 Y106.096 E0.02408 ; perimeter
G1 X113.334 Y105.964 E0.02121 ; perimeter
G1 X113.653 Y105.947 E0.01480 ; perimeter
G1 X113.796 Y105.976 E0.00677 ; perimeter
G1 X113.825 Y106.034 E0.00300 ; perimeter
G1 X113.781 Y106.261 E0.01071 ; perimeter
G1 X113.709 Y106.379 E0.00642 ; perimeter
G1 X113.317 Y106.782 E0.02603 ; perimeter
G1 X112.877 Y107.191 E0.02783 ; perimeter
G1 X112.653 Y107.690 E0.02531 ; perimeter
G1 X112.395 Y108.488 E0.03888 ; perimeter
G1 X112.361 Y108.973 E0.02252 ; perimeter
G1 X112.514 Y109.405 E0.02121 ; perimeter
G1 X112.877 Y109.755 E0.02337 ; perimeter
G1 X114.483 Y111.100 E0.09702 ; perimeter
G1 X115.199 Y111.643 E0.04162 ; perimeter
G1 X115.321 Y111.777 E0.00839 ; perimeter
G1 X115.498 Y111.913 E0.01034 ; perimeter
G1 X115.751 Y112.265 E0.02012 ; perimeter
G1 X115.822 Y112.633 E0.01733 ; perimeter
G1 X115.784 Y112.941 E0.01437 ; perimeter
G1 X115.584 Y113.451 E0.02538 ; perimeter
G1 X115.491 Y113.567 E0.00687 ; perimeter
G1 X115.427 Y113.579 E0.00302 ; perimeter
G1 X115.290 Y113.414 E0.00997 ; perimeter
G1 X115.191 Y113.235 E0.00946 ; perimeter
G1 X115.218 Y112.786 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.769 Y112.964 E-0.13232 ; wipe and retract
G1 X114.097 Y112.965 E-0.17723 ; wipe and retract
G1 X114.009 Y112.899 E-0.02906 ; wipe and retract
G1 X113.952 Y112.750 E-0.04206 ; wipe and retract
G1 X113.956 Y112.641 E-0.02874 ; wipe and retract
G1 X113.924 Y112.470 E-0.04593 ; wipe and retract
G1 X113.936 Y112.346 E-0.03284 ; wipe and retract
G1 X113.996 Y112.118 E-0.06243 ; wipe and retract
G1 X113.924 Y111.909 E-0.05814 ; wipe and retract
G1 X113.943 Y111.758 E-0.04019 ; wipe and retract
G1 X113.770 Y111.472 E-0.08824 ; wipe and retract
G1 X113.368 Y111.093 E-0.14593 ; wipe and retract
G1 X112.943 Y110.736 E-0.14635 ; wipe and retract
G1 X112.877 Y110.636 E-0.03164 ; wipe and retract
G1 X111.862 Y109.880 E-0.33407 ; wipe and retract
G1 X111.672 Y109.810 E-0.05333 ; wipe and retract
G1 X111.561 Y109.811 E-0.02929 ; wipe and retract
G1 X111.186 Y109.722 E-0.10179 ; wipe and retract
G1 X110.795 Y109.695 E-0.10344 ; wipe and retract
G1 X110.535 Y109.625 E-0.07099 ; wipe and retract
G1 X110.260 Y109.519 E-0.07790 ; wipe and retract
G1 X110.023 Y109.344 E-0.07767 ; wipe and retract
G1 X110.001 Y109.248 E-0.02610 ; wipe and retract
G1 X110.028 Y109.193 E-0.01609 ; wipe and retract
G1 X110.176 Y109.084 E-0.04864 ; wipe and retract
G1 X110.533 Y108.955 E-0.10007 ; wipe and retract
G1 X110.920 Y108.879 E-0.10397 ; wipe and retract
G1 X111.072 Y108.806 E-0.04458 ; wipe and retract
G1 X111.189 Y108.798 E-0.03096 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X114.229 Y111.429 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.327755
G1 F2400.000
G1 X114.075 Y111.249 E0.00559 ; infill
;WIDTH:0.313158
G1 X113.607 Y110.830 E0.01414 ; infill
;WIDTH:0.271522
G1 X113.211 Y110.498 E0.00982 ; infill
G1 X113.137 Y110.414 E0.00213 ; infill
;WIDTH:0.238071
G1 X112.504 Y109.902 E0.01320 ; infill
G1 X112.152 Y108.464 F10800.000 ; move to first infill point
;WIDTH:0.158232
G1 F2400.000
G1 X112.119 Y108.442 E0.00038 ; infill
;WIDTH:0.19154
G1 X112.086 Y108.419 E0.00049 ; infill
;WIDTH:0.237456
G1 X112.066 Y108.405 E0.00039 ; infill
;WIDTH:0.254075
G1 X112.047 Y108.390 E0.00043 ; infill
G1 X112.134 Y108.169 E0.00418 ; infill
;WIDTH:0.272129
G1 X112.277 Y107.696 E0.00942 ; infill
;WIDTH:0.306324
G1 X112.308 Y107.549 E0.00328 ; infill
;WIDTH:0.343359
G1 X112.383 Y107.261 E0.00745 ; infill
G1 X112.018 Y106.515 F10800.000 ; move to first infill point
;WIDTH:0.338545
G1 F2400.000
G1 X111.739 Y106.370 E0.00771 ; infill
;WIDTH:0.296879
G1 X111.531 Y106.250 E0.00508 ; infill
;WIDTH:0.257482
G1 X111.077 Y106.047 E0.00888 ; infill
G1 X110.368 Y105.679 E0.01424 ; infill
;WIDTH:0.222964
G1 X110.114 Y105.583 E0.00407 ; infill
G1 X109.533 Y105.310 E0.00961 ; infill
G1 X109.217 Y105.134 E0.00542 ; infill
G1 X109.124 Y105.221 E0.00190 ; infill
G1 X107.950 Y104.906 F10800.000 ; move to first infill point
;WIDTH:0.307289
G1 F2400.000
G1 X107.809 Y104.958 E0.00329 ; infill
;WIDTH:0.298565
G1 X106.836 Y105.035 E0.02076 ; infill
G1 X105.936 Y105.050 E0.01913 ; infill
;WIDTH:0.403238
G1 X105.663 Y105.060 E0.00820 ; infill
G1 X105.506 Y105.267 E0.00777 ; infill
G1 X104.431 Y104.011 F10800.000 ; move to first infill point
;WIDTH:0.341528
G1 F2400.000
G1 X104.078 Y103.209 E0.02175 ; infill
G1 X103.918 Y102.899 E0.00867 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.078 Y103.209 E-0.09215 ; wipe and retract
G1 X104.431 Y104.011 E-0.23118 ; wipe and retract
;WIPE_END
G1 E-2.07667 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X104.179 Y97.767 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.166336
G1 F2400.000
G1 X103.902 Y98.099 E0.00443 ; infill
;WIDTH:0.149636
G1 X103.898 Y98.126 E0.00024 ; infill
;WIDTH:0.135927
G1 X103.895 Y98.320 E0.00150 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.898 Y98.126 E-0.05133 ; wipe and retract
;WIPE_END
G1 E-2.34867 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X105.298 Y100.541 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.300685
G1 F2400.000
G1 X105.470 Y100.574 E0.00377 ; infill
;WIDTH:0.198967
G1 X106.513 Y100.911 E0.01422 ; infill
G1 X106.984 Y101.094 E0.00655 ; infill
G1 X107.252 Y101.162 E0.00359 ; infill
;WIDTH:0.225535
G1 X107.395 Y101.221 E0.00235 ; infill
;WIDTH:0.252105
G1 X107.539 Y101.280 E0.00269 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.395 Y101.221 E-0.04087 ; wipe and retract
;WIPE_END
G1 E-2.35913 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X108.568 Y103.598 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.167626
G1 F2400.000
G1 X108.506 Y103.094 E0.00527 ; infill
G1 X108.413 Y102.587 E0.00534 ; infill
;WIDTH:0.177329
G1 X108.413 Y102.545 E0.00047 ; infill
;WIDTH:0.215512
G1 X108.406 Y102.341 E0.00294 ; infill
;WIDTH:0.253694
G1 X108.398 Y102.136 E0.00359 ; infill
G1 X109.080 Y101.258 F10800.000 ; move to first infill point
;WIDTH:0.339542
G1 F2400.000
G1 X109.324 Y101.127 E0.00683 ; infill
;WIDTH:0.350169
G1 X110.028 Y100.827 E0.01956 ; infill
G1 X110.053 Y100.582 E0.00628 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X110.028 Y100.827 E-0.06491 ; wipe and retract
G1 X109.324 Y101.127 E-0.20206 ; wipe and retract
;WIPE_END
G1 E-2.13303 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X113.263 Y106.493 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.119986
G1 F2400.000
G1 X112.912 Y106.341 E0.00245 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X113.263 Y106.493 E-0.10072 ; wipe and retract
;WIPE_END
G1 E-2.29928 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 X110.377 Y109.268 ; move to first infill point
G1 Z28.000 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.263271
G1 F2400.000
G1 X111.117 Y109.332 E0.01361 ; infill
G1 X111.121 Y109.282 F10800.000 ; move to first infill point
;WIDTH:0.384113
G1 F2400.000
G1 X110.427 Y109.325 E0.01974 ; infill
;LAYER_CHANGE
;Z:28.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;28.2
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.121 Y109.282 E-0.18359 ; wipe and retract
;WIPE_END
G1 E-2.21641 F2400.000 ; retract
G1 Z28.075 F10800.000 ; lift Z
G1 Z28.200 ; move to next layer (140)
;AFTER_LAYER_CHANGE
;28.2
G1 Z28.275 ; lift Z
G1 X105.204 Y105.047 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.897 Y105.060 E0.01040 ; perimeter
G1 X104.826 Y104.800 E0.00912 ; perimeter
G1 X105.154 Y105.014 E0.01328 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.897 Y105.060 E-0.06881 ; wipe and retract
G1 X104.826 Y104.800 E-0.07108 ; wipe and retract
G1 X105.154 Y105.014 E-0.10352 ; wipe and retract
;WIPE_END
G1 E-2.15659 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X103.737 Y102.474 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X103.631 Y102.323 E0.00626 ; perimeter
G1 X103.431 Y102.139 E0.00917 ; perimeter
G1 X103.575 Y102.082 E0.00523 ; perimeter
G1 X103.804 Y101.837 E0.01134 ; perimeter
G1 X103.743 Y102.414 E0.01964 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.631 Y102.323 E-0.03829 ; wipe and retract
G1 X103.431 Y102.139 E-0.07151 ; wipe and retract
G1 X103.575 Y102.082 E-0.04076 ; wipe and retract
G1 X103.804 Y101.837 E-0.08843 ; wipe and retract
G1 X103.743 Y102.414 E-0.15310 ; wipe and retract
;WIPE_END
G1 E-2.00790 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X108.008 Y104.345 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.644 Y104.546 E0.01929 ; perimeter
G1 X107.499 Y104.592 E0.00703 ; perimeter
G1 X106.849 Y104.637 E0.03018 ; perimeter
G1 X105.952 Y104.665 E0.04156 ; perimeter
G1 X105.395 Y104.596 E0.02599 ; perimeter
G1 X105.025 Y104.354 E0.02048 ; perimeter
G1 X104.712 Y103.739 E0.03199 ; perimeter
G1 X104.413 Y103.054 E0.03460 ; perimeter
G1 X104.218 Y102.510 E0.02678 ; perimeter
G1 X104.281 Y101.913 E0.02782 ; perimeter
G1 X104.381 Y101.515 E0.01900 ; perimeter
G1 X104.516 Y101.224 E0.01484 ; perimeter
G1 X104.686 Y101.027 E0.01204 ; perimeter
G1 X104.856 Y101.008 E0.00792 ; perimeter
G1 X105.029 Y100.903 E0.00940 ; perimeter
G1 X105.331 Y100.939 E0.01408 ; perimeter
G1 X105.802 Y101.070 E0.02266 ; perimeter
G1 X107.180 Y101.558 E0.06768 ; perimeter
G1 X107.608 Y101.769 E0.02212 ; perimeter
G1 X107.933 Y102.144 E0.02298 ; perimeter
G1 X108.000 Y102.352 E0.01015 ; perimeter
G1 X108.056 Y102.800 E0.02090 ; perimeter
G1 X108.114 Y103.047 E0.01175 ; perimeter
G1 X108.192 Y103.884 E0.03896 ; perimeter
G1 X108.030 Y104.289 E0.02018 ; perimeter
G1 X108.130 Y104.725 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.644 Y104.546 E-0.12259 ; wipe and retract
G1 X107.499 Y104.592 E-0.04008 ; wipe and retract
G1 X106.849 Y104.637 E-0.17196 ; wipe and retract
G1 X105.952 Y104.665 E-0.23676 ; wipe and retract
G1 X105.395 Y104.596 E-0.14808 ; wipe and retract
G1 X105.025 Y104.354 E-0.11670 ; wipe and retract
G1 X104.712 Y103.739 E-0.18225 ; wipe and retract
G1 X104.413 Y103.054 E-0.19712 ; wipe and retract
G1 X104.218 Y102.510 E-0.15256 ; wipe and retract
G1 X104.281 Y101.913 E-0.15846 ; wipe and retract
G1 X104.381 Y101.515 E-0.10827 ; wipe and retract
G1 X104.516 Y101.224 E-0.08455 ; wipe and retract
G1 X104.686 Y101.027 E-0.06860 ; wipe and retract
G1 X104.856 Y101.008 E-0.04513 ; wipe and retract
G1 X105.029 Y100.903 E-0.05356 ; wipe and retract
G1 X105.331 Y100.939 E-0.08021 ; wipe and retract
G1 X105.802 Y101.070 E-0.12910 ; wipe and retract
G1 X106.460 Y101.303 E-0.18401 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X104.855 Y100.445 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.696 Y100.541 E0.00630 ; perimeter
G1 X104.443 Y100.570 E0.00860 ; perimeter
G1 X104.266 Y100.776 E0.00921 ; perimeter
G1 X104.353 Y100.444 E0.01164 ; perimeter
G1 X104.293 Y100.135 E0.01063 ; perimeter
G1 X104.292 Y100.024 E0.00376 ; perimeter
G1 X104.424 Y100.211 E0.00773 ; perimeter
G1 X104.802 Y100.416 E0.01456 ; perimeter
G1 X103.676 Y99.094 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X103.393 Y99.003 E0.01006 ; perimeter
G1 X103.607 Y98.760 E0.01095 ; perimeter
G1 X103.664 Y99.035 E0.00952 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.393 Y99.003 E-0.07192 ; wipe and retract
G1 X103.607 Y98.760 E-0.08538 ; wipe and retract
G1 X103.664 Y99.035 E-0.07419 ; wipe and retract
;WIPE_END
G1 E-2.16851 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X107.991 Y101.475 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.264 Y101.457 E0.00927 ; perimeter
G1 X108.692 Y101.471 E0.01451 ; perimeter
G1 X108.471 Y101.678 E0.01025 ; perimeter
G1 X108.394 Y102.001 E0.01125 ; perimeter
G1 X108.362 Y101.902 E0.00352 ; perimeter
G1 X108.030 Y101.520 E0.01713 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.264 Y101.457 E-0.06394 ; wipe and retract
G1 X108.692 Y101.471 E-0.11309 ; wipe and retract
G1 X108.471 Y101.678 E-0.07991 ; wipe and retract
G1 X108.394 Y102.001 E-0.08771 ; wipe and retract
G1 X108.362 Y101.902 E-0.02747 ; wipe and retract
G1 X108.030 Y101.520 E-0.13351 ; wipe and retract
;WIPE_END
G1 E-1.89437 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X108.578 Y104.217 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.790 Y104.902 E0.02427 ; perimeter
G1 X108.073 Y104.860 E0.02430 ; perimeter
G1 X108.392 Y104.683 E0.01233 ; perimeter
G1 X108.556 Y104.273 E0.01496 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.790 Y104.902 E-0.17716 ; wipe and retract
G1 X108.073 Y104.860 E-0.18948 ; wipe and retract
G1 X108.392 Y104.683 E-0.09616 ; wipe and retract
G1 X108.556 Y104.273 E-0.11664 ; wipe and retract
;WIPE_END
G1 E-1.82056 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X112.100 Y106.593 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.270 Y106.656 E0.00612 ; perimeter
G1 X112.542 Y106.693 E0.00929 ; perimeter
G1 X112.707 Y106.669 E0.00566 ; perimeter
G1 X112.464 Y106.895 E0.01124 ; perimeter
G1 X112.401 Y107.068 E0.00624 ; perimeter
G1 X112.259 Y106.782 E0.01080 ; perimeter
G1 X112.139 Y106.639 E0.00634 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.270 Y106.656 E-0.03488 ; wipe and retract
G1 X112.542 Y106.693 E-0.07243 ; wipe and retract
G1 X112.707 Y106.669 E-0.04416 ; wipe and retract
G1 X112.464 Y106.895 E-0.08761 ; wipe and retract
G1 X112.401 Y107.068 E-0.04867 ; wipe and retract
G1 X112.259 Y106.782 E-0.08418 ; wipe and retract
G1 X112.139 Y106.639 E-0.04941 ; wipe and retract
;WIPE_END
G1 E-1.97866 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X111.940 Y108.841 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.930 Y109.036 E0.00661 ; perimeter
G1 X112.042 Y109.447 E0.01439 ; perimeter
G1 X111.939 Y109.368 E0.00436 ; perimeter
G1 X111.417 Y109.257 E0.01808 ; perimeter
G1 X111.734 Y109.051 E0.01283 ; perimeter
G1 X111.846 Y108.906 E0.00616 ; perimeter
G1 X111.890 Y108.875 E0.00184 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.930 Y109.036 E-0.04378 ; wipe and retract
G1 X112.042 Y109.447 E-0.11217 ; wipe and retract
G1 X111.939 Y109.368 E-0.03403 ; wipe and retract
G1 X111.417 Y109.257 E-0.14093 ; wipe and retract
G1 X111.734 Y109.051 E-0.10001 ; wipe and retract
G1 X111.846 Y108.906 E-0.04806 ; wipe and retract
G1 X111.890 Y108.875 E-0.01436 ; wipe and retract
;WIPE_END
G1 E-1.90666 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X114.383 Y111.578 ; move to first perimeter point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.676 Y111.821 E0.01284 ; perimeter
G1 X114.963 Y112.119 E0.01403 ; perimeter
G1 X115.086 Y112.282 E0.00691 ; perimeter
G1 X114.807 Y112.210 E0.00976 ; perimeter
G1 X114.520 Y112.200 E0.00971 ; perimeter
G1 X114.509 Y112.136 E0.00219 ; perimeter
G1 X114.531 Y112.014 E0.00420 ; perimeter
G1 X114.403 Y111.635 E0.01354 ; perimeter
G1 X114.136 Y112.618 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.083 Y112.503 E0.00587 ; perimeter
G1 X114.020 Y112.136 E0.01726 ; perimeter
G1 X114.035 Y112.052 E0.00393 ; perimeter
G1 X113.892 Y111.629 E0.02067 ; perimeter
G1 X113.158 Y110.961 E0.04597 ; perimeter
G1 X112.334 Y110.290 E0.04922 ; perimeter
G1 X112.127 Y110.090 E0.01334 ; perimeter
G1 X111.966 Y109.997 E0.00862 ; perimeter
G1 X111.732 Y109.817 E0.01366 ; perimeter
G1 X110.916 Y109.644 E0.03864 ; perimeter
G1 X110.620 Y109.506 E0.01513 ; perimeter
G1 X110.441 Y109.371 E0.01041 ; perimeter
G1 X110.404 Y109.298 E0.00378 ; perimeter
G1 X110.432 Y109.219 E0.00385 ; perimeter
G1 X110.574 Y109.100 E0.00858 ; perimeter
G1 X110.750 Y109.037 E0.00864 ; perimeter
G1 X110.973 Y108.911 E0.01186 ; perimeter
G1 X111.064 Y108.892 E0.00430 ; perimeter
G1 X111.219 Y108.818 E0.00797 ; perimeter
G1 X111.400 Y108.695 E0.01014 ; perimeter
G1 X111.510 Y108.553 E0.00832 ; perimeter
G1 X111.600 Y108.490 E0.00508 ; perimeter
G1 X111.934 Y107.553 E0.04609 ; perimeter
G1 X111.960 Y107.264 E0.01344 ; perimeter
G1 X111.852 Y107.048 E0.01117 ; perimeter
G1 X111.622 Y106.773 E0.01662 ; perimeter
G1 X111.191 Y106.530 E0.02290 ; perimeter
G1 X109.318 Y105.622 E0.09642 ; perimeter
G1 X108.729 Y105.381 E0.02949 ; perimeter
G1 X108.147 Y105.340 E0.02701 ; perimeter
G1 X107.434 Y105.360 E0.03307 ; perimeter
G1 X106.532 Y105.433 E0.04191 ; perimeter
G1 X105.510 Y105.484 E0.04740 ; perimeter
G1 X105.397 Y105.520 E0.00549 ; perimeter
G1 X104.877 Y105.547 E0.02411 ; perimeter
G1 X104.715 Y105.515 E0.00764 ; perimeter
G1 X104.548 Y105.433 E0.00863 ; perimeter
G1 X104.523 Y105.402 E0.00183 ; perimeter
G1 X104.454 Y105.280 E0.00651 ; perimeter
G1 X104.399 Y105.045 E0.01119 ; perimeter
G1 X104.189 Y104.408 E0.03107 ; perimeter
G1 X103.878 Y103.677 E0.03678 ; perimeter
G1 X103.603 Y103.122 E0.02868 ; perimeter
G1 X103.273 Y102.652 E0.02664 ; perimeter
G1 X103.095 Y102.503 E0.01072 ; perimeter
G1 X102.949 Y102.286 E0.01213 ; perimeter
G1 X102.877 Y102.032 E0.01221 ; perimeter
G1 X102.902 Y101.933 E0.00474 ; perimeter
G1 X103.020 Y101.785 E0.00878 ; perimeter
G1 X103.296 Y101.674 E0.01378 ; perimeter
G1 X103.455 Y101.504 E0.01078 ; perimeter
G1 X103.544 Y101.279 E0.01122 ; perimeter
G1 X103.693 Y101.059 E0.01231 ; perimeter
G1 X103.859 Y100.428 E0.03020 ; perimeter
G1 X103.811 Y100.183 E0.01159 ; perimeter
G1 X103.810 Y99.954 E0.01059 ; perimeter
G1 X103.519 Y99.550 E0.02307 ; perimeter
G1 X102.851 Y99.334 E0.03251 ; perimeter
G1 X102.812 Y99.350 E0.00196 ; perimeter
G1 X102.693 Y99.294 E0.00607 ; perimeter
G1 X102.708 Y99.196 E0.00457 ; perimeter
G1 X102.934 Y98.795 E0.02132 ; perimeter
G1 X103.461 Y98.198 E0.03689 ; perimeter
G1 X103.943 Y97.844 E0.02772 ; perimeter
G1 X104.037 Y97.810 E0.00463 ; perimeter
G1 X104.199 Y97.818 E0.00747 ; perimeter
G1 X104.190 Y97.921 E0.00481 ; perimeter
G1 X104.121 Y98.169 E0.01191 ; perimeter
G1 X104.057 Y98.251 E0.00483 ; perimeter
G1 X104.033 Y98.434 E0.00856 ; perimeter
G1 X104.136 Y98.936 E0.02376 ; perimeter
G1 X104.288 Y99.233 E0.01544 ; perimeter
G1 X104.469 Y99.437 E0.01261 ; perimeter
G1 X104.753 Y99.841 E0.02291 ; perimeter
G1 X105.141 Y100.051 E0.02042 ; perimeter
G1 X105.658 Y100.209 E0.02507 ; perimeter
G1 X107.319 Y100.806 E0.08174 ; perimeter
G1 X107.989 Y100.992 E0.03219 ; perimeter
G1 X108.256 Y100.974 E0.01243 ; perimeter
G1 X108.618 Y100.986 E0.01676 ; perimeter
G1 X109.544 Y100.652 E0.04562 ; perimeter
G1 X110.517 Y100.248 E0.04879 ; perimeter
G1 X110.546 Y100.177 E0.00354 ; perimeter
G1 X110.836 Y100.233 E0.01372 ; perimeter
G1 X111.002 Y100.403 E0.01101 ; perimeter
G1 X111.060 Y100.500 E0.00520 ; perimeter
G1 X111.060 Y100.587 E0.00405 ; perimeter
G1 X110.846 Y100.765 E0.01287 ; perimeter
G1 X110.023 Y101.223 E0.04363 ; perimeter
G1 X109.719 Y101.356 E0.01537 ; perimeter
G1 X109.268 Y101.594 E0.02364 ; perimeter
G1 X108.906 Y101.931 E0.02290 ; perimeter
G1 X108.794 Y102.401 E0.02239 ; perimeter
G1 X108.900 Y103.087 E0.03216 ; perimeter
G1 X108.981 Y103.838 E0.03497 ; perimeter
G1 X109.094 Y104.294 E0.02175 ; perimeter
G1 X109.200 Y104.609 E0.01539 ; perimeter
G1 X109.542 Y104.851 E0.01940 ; perimeter
G1 X109.544 Y104.883 E0.00146 ; perimeter
G1 X111.883 Y105.998 E0.12004 ; perimeter
G1 X112.388 Y106.185 E0.02494 ; perimeter
G1 X112.540 Y106.206 E0.00713 ; perimeter
G1 X113.128 Y106.121 E0.02749 ; perimeter
G1 X113.502 Y106.144 E0.01735 ; perimeter
G1 X113.531 Y106.172 E0.00187 ; perimeter
G1 X113.552 Y106.228 E0.00277 ; perimeter
G1 X113.527 Y106.352 E0.00589 ; perimeter
G1 X113.413 Y106.581 E0.01183 ; perimeter
G1 X113.109 Y106.954 E0.02231 ; perimeter
G1 X112.877 Y107.170 E0.01466 ; perimeter
G1 X112.632 Y107.838 E0.03299 ; perimeter
G1 X112.606 Y107.981 E0.00674 ; perimeter
G1 X112.438 Y108.512 E0.02578 ; perimeter
G1 X112.415 Y108.986 E0.02199 ; perimeter
G1 X112.485 Y109.254 E0.01284 ; perimeter
G1 X112.579 Y109.431 E0.00923 ; perimeter
G1 X112.757 Y109.626 E0.01224 ; perimeter
G1 X113.211 Y109.979 E0.02663 ; perimeter
G1 X115.004 Y111.467 E0.10795 ; perimeter
G1 X115.330 Y111.805 E0.02176 ; perimeter
G1 X115.518 Y112.053 E0.01442 ; perimeter
G1 X115.644 Y112.318 E0.01356 ; perimeter
G1 X115.681 Y112.533 E0.01010 ; perimeter
G1 X115.681 Y112.619 E0.00400 ; perimeter
G1 X115.566 Y112.941 E0.01586 ; perimeter
G1 X115.445 Y113.038 E0.00717 ; perimeter
G1 X115.122 Y112.789 E0.01891 ; perimeter
G1 X114.738 Y112.690 E0.01839 ; perimeter
G1 X114.204 Y112.672 E0.02475 ; perimeter
G1 X114.182 Y112.656 E0.00123 ; perimeter
G1 X114.170 Y112.496 F10800.000 ; move inwards before travel
G1 X114.244 Y111.382 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.39252
G1 F2400.000
G1 X113.419 Y110.665 E0.03177 ; infill
;WIDTH:0.350403
G1 X112.504 Y109.918 E0.03021 ; infill
;WIDTH:0.332622
G1 X112.191 Y109.636 E0.01014 ; infill
G1 X112.025 Y108.489 F10800.000 ; move to first infill point
;WIDTH:0.282788
G1 F2400.000
G1 X112.286 Y107.685 E0.01685 ; infill
G1 X112.241 Y107.288 E0.00798 ; infill
G1 X111.905 Y106.452 F10800.000 ; move to first infill point
;WIDTH:0.370559
G1 F2400.000
G1 X111.376 Y106.187 E0.01610 ; infill
;WIDTH:0.338971
G1 X109.478 Y105.275 E0.05184 ; infill
;WIDTH:0.325756
G1 X109.279 Y105.187 E0.00511 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.478 Y105.275 E-0.05734 ; wipe and retract
;WIPE_END
G1 E-2.34266 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X112.909 Y106.531 ; move to first infill point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.17408
G1 F2400.000
G1 X113.241 Y106.385 E0.00396 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.909 Y106.531 E-0.09575 ; wipe and retract
;WIPE_END
G1 E-2.30425 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X110.754 Y100.486 ; move to first infill point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.170036
G1 F2400.000
G1 X110.673 Y100.513 E0.00090 ; infill
;WIDTH:0.204158
G1 X110.404 Y100.643 E0.00401 ; infill
;WIDTH:0.237521
G1 X109.865 Y100.904 E0.00969 ; infill
G1 X109.342 Y101.127 E0.00919 ; infill
G1 X109.028 Y101.170 E0.00513 ; infill
;WIDTH:0.143787
G1 X108.770 Y101.211 E0.00219 ; infill
G1 X108.566 Y102.236 F10800.000 ; move to first infill point
;WIDTH:0.314387
G1 F2400.000
G1 X108.399 Y102.392 E0.00517 ; infill
G1 X108.496 Y102.995 E0.01378 ; infill
G1 X108.598 Y103.977 E0.02229 ; infill
G1 X107.841 Y104.926 F10800.000 ; move to first infill point
;WIDTH:0.360673
G1 F2400.000
G1 X107.587 Y104.969 E0.00681 ; infill
;WIDTH:0.333761
G1 X107.417 Y104.979 E0.00413 ; infill
;WIDTH:0.322831
G1 X105.946 Y105.064 E0.03429 ; infill
G1 X105.454 Y105.047 E0.01145 ; infill
G1 X104.688 Y104.602 F10800.000 ; move to first infill point
;WIDTH:0.361255
G1 F2400.000
G1 X104.553 Y104.278 E0.00931 ; infill
;WIDTH:0.332779
G1 X104.377 Y103.901 E0.01002 ; infill
;WIDTH:0.304002
G1 X103.935 Y102.896 E0.02383 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.377 Y103.901 E-0.28968 ; wipe and retract
;WIPE_END
G1 E-2.11032 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 X105.435 Y100.556 ; move to first infill point
G1 Z28.200 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.316478
G1 F2400.000
G1 X105.922 Y100.708 E0.01161 ; infill
G1 X107.209 Y101.168 E0.03110 ; infill
;WIDTH:0.330676
G1 X107.356 Y101.216 E0.00369 ; infill
;LAYER_CHANGE
;Z:28.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;28.4
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.209 Y101.168 E-0.04073 ; wipe and retract
;WIPE_END
G1 E-2.35927 F2400.000 ; retract
G1 Z28.275 F10800.000 ; lift Z
G1 Z28.400 ; move to next layer (141)
;AFTER_LAYER_CHANGE
;28.4
G1 Z28.475 ; lift Z
G1 X108.591 Y104.277 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.701 Y104.827 E0.01899 ; perimeter
G1 X108.821 Y104.918 E0.00511 ; perimeter
G1 X108.182 Y104.846 E0.02176 ; perimeter
G1 X108.254 Y104.806 E0.00280 ; perimeter
G1 X108.540 Y104.403 E0.01673 ; perimeter
G1 X108.569 Y104.332 E0.00258 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.701 Y104.827 E-0.13513 ; wipe and retract
G1 X108.821 Y104.918 E-0.03984 ; wipe and retract
G1 X108.182 Y104.846 E-0.16968 ; wipe and retract
G1 X108.254 Y104.806 E-0.02180 ; wipe and retract
G1 X108.540 Y104.403 E-0.13044 ; wipe and retract
G1 X108.569 Y104.332 E-0.02013 ; wipe and retract
;WIPE_END
G1 E-1.88300 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X108.376 Y101.953 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.346 Y101.853 E0.00355 ; perimeter
G1 X108.010 Y101.482 E0.01694 ; perimeter
G1 X108.580 Y101.517 E0.01931 ; perimeter
G1 X108.530 Y101.564 E0.00232 ; perimeter
G1 X108.398 Y101.897 E0.01212 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.346 Y101.853 E-0.01813 ; wipe and retract
G1 X108.010 Y101.482 E-0.13207 ; wipe and retract
G1 X108.580 Y101.517 E-0.15057 ; wipe and retract
G1 X108.530 Y101.564 E-0.01809 ; wipe and retract
G1 X108.398 Y101.897 E-0.09450 ; wipe and retract
;WIPE_END
G1 E-1.98665 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X104.741 Y100.956 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X105.061 Y100.919 E0.01490 ; perimeter
G1 X105.280 Y100.927 E0.01018 ; perimeter
G1 X106.916 Y101.468 E0.07980 ; perimeter
G1 X107.606 Y101.754 E0.03460 ; perimeter
G1 X107.915 Y102.095 E0.02135 ; perimeter
G1 X108.058 Y102.573 E0.02309 ; perimeter
G1 X108.144 Y103.289 E0.03341 ; perimeter
G1 X108.195 Y103.971 E0.03170 ; perimeter
G1 X108.114 Y104.170 E0.00992 ; perimeter
G1 X107.924 Y104.438 E0.01522 ; perimeter
G1 X107.763 Y104.528 E0.00857 ; perimeter
G1 X107.405 Y104.640 E0.01735 ; perimeter
G1 X105.836 Y104.707 E0.07275 ; perimeter
G1 X105.467 Y104.682 E0.01714 ; perimeter
G1 X105.289 Y104.633 E0.00853 ; perimeter
G1 X105.064 Y104.515 E0.01176 ; perimeter
G1 X104.886 Y104.271 E0.01400 ; perimeter
G1 X104.773 Y104.061 E0.01103 ; perimeter
G1 X104.369 Y103.194 E0.04434 ; perimeter
G1 X104.132 Y102.612 E0.02911 ; perimeter
G1 X104.159 Y102.220 E0.01821 ; perimeter
G1 X104.221 Y101.791 E0.02007 ; perimeter
G1 X104.439 Y101.254 E0.02685 ; perimeter
G1 X104.542 Y101.187 E0.00568 ; perimeter
G1 X104.702 Y101.001 E0.01136 ; perimeter
G1 X104.801 Y100.640 F10800.000 ; move inwards before travel
G1 X104.337 Y100.687 ; move to first perimeter point
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.296 Y100.734 E0.00209 ; perimeter
G1 X104.383 Y100.413 E0.01123 ; perimeter
G1 X104.327 Y100.077 E0.01153 ; perimeter
G1 X104.610 Y100.345 E0.01319 ; perimeter
G1 X104.741 Y100.374 E0.00454 ; perimeter
G1 X104.873 Y100.455 E0.00524 ; perimeter
G1 X104.499 Y100.499 E0.01275 ; perimeter
G1 X104.376 Y100.641 E0.00638 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X104.296 Y100.734 E-0.03210 ; wipe and retract
G1 X104.383 Y100.413 E-0.08754 ; wipe and retract
G1 X104.327 Y100.077 E-0.08991 ; wipe and retract
G1 X104.610 Y100.345 E-0.10281 ; wipe and retract
G1 X104.741 Y100.374 E-0.03537 ; wipe and retract
G1 X104.873 Y100.455 E-0.04083 ; wipe and retract
G1 X104.499 Y100.499 E-0.09939 ; wipe and retract
G1 X104.376 Y100.641 E-0.04972 ; wipe and retract
;WIPE_END
G1 E-1.86232 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X112.263 Y106.700 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X112.565 Y106.742 E0.01032 ; perimeter
G1 X112.433 Y106.953 E0.00843 ; perimeter
G1 X112.386 Y107.083 E0.00470 ; perimeter
G1 X112.303 Y106.745 E0.01179 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X112.565 Y106.742 E-0.06907 ; wipe and retract
G1 X112.433 Y106.953 E-0.06569 ; wipe and retract
G1 X112.386 Y107.083 E-0.03665 ; wipe and retract
G1 X112.303 Y106.745 E-0.09194 ; wipe and retract
;WIPE_END
G1 E-2.13665 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X111.940 Y108.898 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X111.939 Y109.247 E0.01182 ; perimeter
G1 X112.033 Y109.427 E0.00687 ; perimeter
G1 X111.876 Y109.308 E0.00665 ; perimeter
G1 X111.613 Y109.253 E0.00911 ; perimeter
G1 X111.731 Y109.110 E0.00626 ; perimeter
G1 X111.826 Y109.046 E0.00388 ; perimeter
G1 X111.904 Y108.946 E0.00429 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X111.939 Y109.247 E-0.08014 ; wipe and retract
G1 X112.033 Y109.427 E-0.05353 ; wipe and retract
G1 X111.876 Y109.308 E-0.05182 ; wipe and retract
G1 X111.613 Y109.253 E-0.07101 ; wipe and retract
G1 X111.731 Y109.110 E-0.04877 ; wipe and retract
G1 X111.826 Y109.046 E-0.03028 ; wipe and retract
G1 X111.904 Y108.946 E-0.03342 ; wipe and retract
;WIPE_END
G1 E-2.03103 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X114.581 Y111.795 ; move to first perimeter point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X114.714 Y111.938 E0.00660 ; perimeter
G1 X114.608 Y111.929 E0.00360 ; perimeter
G1 X114.593 Y111.853 E0.00260 ; perimeter
G1 X114.264 Y112.328 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X114.169 Y112.193 E0.00763 ; perimeter
G1 X114.101 Y111.850 E0.01621 ; perimeter
G1 X113.995 Y111.737 E0.00715 ; perimeter
G1 X113.959 Y111.628 E0.00531 ; perimeter
G1 X113.385 Y111.118 E0.03557 ; perimeter
G1 X112.554 Y110.430 E0.04999 ; perimeter
G1 X111.671 Y109.757 E0.05141 ; perimeter
G1 X111.305 Y109.668 E0.01742 ; perimeter
G1 X110.855 Y109.387 E0.02457 ; perimeter
G1 X110.802 Y109.291 E0.00508 ; perimeter
G1 X111.013 Y109.067 E0.01427 ; perimeter
G1 X111.277 Y108.903 E0.01439 ; perimeter
G1 X111.404 Y108.750 E0.00923 ; perimeter
G1 X111.492 Y108.690 E0.00489 ; perimeter
G1 X111.599 Y108.552 E0.00812 ; perimeter
G1 X111.829 Y107.932 E0.03063 ; perimeter
G1 X111.985 Y107.355 E0.02765 ; perimeter
G1 X111.919 Y107.232 E0.00648 ; perimeter
G1 X111.865 Y106.978 E0.01201 ; perimeter
G1 X111.716 Y106.814 E0.01025 ; perimeter
G1 X111.317 Y106.574 E0.02157 ; perimeter
G1 X110.929 Y106.382 E0.02008 ; perimeter
G1 X108.845 Y105.406 E0.10660 ; perimeter
G1 X108.134 Y105.326 E0.03315 ; perimeter
G1 X105.544 Y105.417 E0.12004 ; perimeter
G1 X104.958 Y105.395 E0.02716 ; perimeter
G1 X104.668 Y105.282 E0.01440 ; perimeter
G1 X104.506 Y104.995 E0.01527 ; perimeter
G1 X104.443 Y104.801 E0.00945 ; perimeter
G1 X103.919 Y103.551 E0.06276 ; perimeter
G1 X103.475 Y102.663 E0.04601 ; perimeter
G1 X103.364 Y102.541 E0.00761 ; perimeter
G1 X103.236 Y102.264 E0.01416 ; perimeter
G1 X103.254 Y102.109 E0.00724 ; perimeter
G1 X103.331 Y102.037 E0.00487 ; perimeter
G1 X103.423 Y101.849 E0.00970 ; perimeter
G1 X103.491 Y101.776 E0.00463 ; perimeter
G1 X103.668 Y101.227 E0.02671 ; perimeter
G1 X103.741 Y101.072 E0.00793 ; perimeter
G1 X103.798 Y100.728 E0.01616 ; perimeter
G1 X103.891 Y100.389 E0.01629 ; perimeter
G1 X103.788 Y99.772 E0.02896 ; perimeter
G1 X103.468 Y99.268 E0.02766 ; perimeter
G1 X103.350 Y99.205 E0.00617 ; perimeter
G1 X103.210 Y99.038 E0.01009 ; perimeter
G1 X103.196 Y98.981 E0.00274 ; perimeter
G1 X103.235 Y98.794 E0.00883 ; perimeter
G1 X103.445 Y98.469 E0.01795 ; perimeter
G1 X103.666 Y98.325 E0.01222 ; perimeter
G1 X103.767 Y98.298 E0.00482 ; perimeter
G1 X103.796 Y98.298 E0.00137 ; perimeter
G1 X103.862 Y98.365 E0.00434 ; perimeter
G1 X103.832 Y98.480 E0.00554 ; perimeter
G1 X104.004 Y98.774 E0.01578 ; perimeter
G1 X104.041 Y98.973 E0.00938 ; perimeter
G1 X104.455 Y99.534 E0.03232 ; perimeter
G1 X104.845 Y99.904 E0.02487 ; perimeter
G1 X104.924 Y99.921 E0.00377 ; perimeter
G1 X105.213 Y100.098 E0.01567 ; perimeter
G1 X105.800 Y100.267 E0.02832 ; perimeter
G1 X107.587 Y100.892 E0.08767 ; perimeter
G1 X107.890 Y100.980 E0.01461 ; perimeter
G1 X108.223 Y101.023 E0.01558 ; perimeter
G1 X108.510 Y101.032 E0.01329 ; perimeter
G1 X108.689 Y100.966 E0.00883 ; perimeter
G1 X109.104 Y100.903 E0.01946 ; perimeter
G1 X109.289 Y100.828 E0.00924 ; perimeter
G1 X109.966 Y100.650 E0.03241 ; perimeter
G1 X110.352 Y100.600 E0.01805 ; perimeter
G1 X110.445 Y100.612 E0.00435 ; perimeter
G1 X110.330 Y100.838 E0.01178 ; perimeter
G1 X110.065 Y101.057 E0.01590 ; perimeter
G1 X109.280 Y101.516 E0.04214 ; perimeter
G1 X108.939 Y101.840 E0.02179 ; perimeter
G1 X108.836 Y102.101 E0.01297 ; perimeter
G1 X108.783 Y102.324 E0.01063 ; perimeter
G1 X108.970 Y103.711 E0.06485 ; perimeter
G1 X109.138 Y104.553 E0.03974 ; perimeter
G1 X109.588 Y104.893 E0.02613 ; perimeter
G1 X111.876 Y106.017 E0.11807 ; perimeter
G1 X112.380 Y106.230 E0.02538 ; perimeter
G1 X112.825 Y106.291 E0.02080 ; perimeter
G1 X112.932 Y106.276 E0.00498 ; perimeter
G1 X113.048 Y106.321 E0.00577 ; perimeter
G1 X113.225 Y106.332 E0.00823 ; perimeter
G1 X113.244 Y106.354 E0.00131 ; perimeter
G1 X113.257 Y106.477 E0.00574 ; perimeter
G1 X113.162 Y106.697 E0.01112 ; perimeter
G1 X112.869 Y107.165 E0.02555 ; perimeter
G1 X112.617 Y107.863 E0.03436 ; perimeter
G1 X112.423 Y108.545 E0.03285 ; perimeter
G1 X112.421 Y109.130 E0.02710 ; perimeter
G1 X112.613 Y109.497 E0.01917 ; perimeter
G1 X113.925 Y110.605 E0.07957 ; perimeter
G1 X114.069 Y110.755 E0.00960 ; perimeter
G1 X114.461 Y111.040 E0.02246 ; perimeter
G1 X114.864 Y111.395 E0.02491 ; perimeter
G1 X115.062 Y111.595 E0.01302 ; perimeter
G1 X115.271 Y111.891 E0.01681 ; perimeter
G1 X115.308 Y111.977 E0.00432 ; perimeter
G1 X115.336 Y112.145 E0.00786 ; perimeter
G1 X115.401 Y112.252 E0.00581 ; perimeter
G1 X115.412 Y112.499 E0.01148 ; perimeter
G1 X115.381 Y112.543 E0.00246 ; perimeter
G1 X115.249 Y112.562 E0.00620 ; perimeter
G1 X115.114 Y112.503 E0.00682 ; perimeter
G1 X114.839 Y112.432 E0.01316 ; perimeter
G1 X114.366 Y112.392 E0.02198 ; perimeter
G1 X114.314 Y112.360 E0.00282 ; perimeter
G1 X114.292 Y112.165 F10800.000 ; move inwards before travel
G1 X114.424 Y111.605 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.371992
G1 F2400.000
G1 X114.315 Y111.441 E0.00537 ; infill
;WIDTH:0.355872
G1 X114.264 Y111.382 E0.00205 ; infill
;WIDTH:0.334719
G1 X113.838 Y111.036 E0.01331 ; infill
;WIDTH:0.286497
G1 X113.624 Y110.836 E0.00593 ; infill
G1 X112.288 Y109.730 E0.03514 ; infill
G1 X112.332 Y109.491 E0.00493 ; infill
G1 X111.158 Y109.276 F10800.000 ; move to first infill point
;WIDTH:0.135322
G1 F2400.000
G1 X111.220 Y109.276 E0.00048 ; infill
G1 X111.331 Y109.180 E0.00113 ; infill
G1 X112.004 Y108.665 F10800.000 ; move to first infill point
;WIDTH:0.300144
G1 F2400.000
G1 X112.042 Y108.471 E0.00422 ; infill
G1 X112.183 Y108.039 E0.00973 ; infill
;WIDTH:0.309061
G1 X112.339 Y107.507 E0.01226 ; infill
G1 X111.548 Y106.275 F10800.000 ; move to first infill point
;WIDTH:0.312398
G1 F2400.000
G1 X109.395 Y105.233 E0.05360 ; infill
G1 X109.040 Y105.020 E0.00928 ; infill
G1 X108.614 Y104.037 F10800.000 ; move to first infill point
;WIDTH:0.366489
G1 F2400.000
G1 X108.579 Y103.782 E0.00692 ; infill
;WIDTH:0.26941
G1 X108.429 Y102.508 E0.02416 ; infill
G1 X108.394 Y102.342 E0.00319 ; infill
G1 X108.543 Y102.202 E0.00386 ; infill
G1 X108.661 Y101.257 F10800.000 ; move to first infill point
;WIDTH:0.12646
G1 F2400.000
G1 X109.158 Y101.217 E0.00346 ; infill
G1 X109.609 Y101.017 E0.00343 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X109.158 Y101.217 E-0.13025 ; wipe and retract
G1 X108.661 Y101.257 E-0.13161 ; wipe and retract
;WIPE_END
G1 E-2.13813 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X107.249 Y101.185 ; move to first infill point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.337821
G1 F2400.000
G1 X107.054 Y101.111 E0.00512 ; infill
;WIDTH:0.326165
G1 X105.681 Y100.644 E0.03417 ; infill
G1 X105.370 Y100.548 E0.00766 ; infill
G1 X105.109 Y100.503 E0.00622 ; infill
G1 X104.310 Y101.014 F10800.000 ; move to first infill point
;WIDTH:0.223058
G1 F2400.000
G1 X104.119 Y101.059 E0.00294 ; infill
G1 X103.887 Y101.687 E0.01004 ; infill
G1 X103.826 Y101.941 E0.00391 ; infill
;WIDTH:0.323206
G1 X103.635 Y102.482 E0.01338 ; infill
G1 X104.007 Y103.189 F10800.000 ; move to first infill point
;WIDTH:0.330815
G1 F2400.000
G1 X103.630 Y101.981 E0.03031 ; infill
G1 X103.613 Y102.009 F10800.000 ; move to first infill point
;WIDTH:0.185665
G1 F2400.000
G1 X103.826 Y102.676 E0.00831 ; infill
;WIDTH:0.175913
G1 X103.968 Y102.991 E0.00382 ; infill
;WIDTH:0.15002
G1 X104.111 Y103.306 E0.00308 ; infill
;WIDTH:0.124128
G1 X104.510 Y104.195 E0.00658 ; infill
G1 X104.694 Y104.559 E0.00276 ; infill
;WIDTH:0.24187
G1 X104.842 Y104.820 E0.00497 ; infill
G1 X105.129 Y105.161 E0.00736 ; infill
G1 X105.442 Y105.172 F10800.000 ; move to first infill point
;WIDTH:0.414169
G1 F2400.000
G1 X104.703 Y104.820 E0.02527 ; infill
G1 X104.740 Y104.919 F10800.000 ; move to first infill point
;WIDTH:0.363087
G1 F2400.000
G1 X105.160 Y105.007 E0.01141 ; infill
;WIDTH:0.260961
G1 X105.418 Y105.046 E0.00473 ; infill
G1 X105.837 Y105.057 E0.00762 ; infill
;WIDTH:0.277001
G1 X107.482 Y104.991 E0.03203 ; infill
;WIDTH:0.319071
G1 X107.716 Y104.951 E0.00545 ; infill
;WIDTH:0.36114
G1 X107.949 Y104.911 E0.00627 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.716 Y104.951 E-0.06258 ; wipe and retract
;WIPE_END
G1 E-2.33742 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 X104.226 Y99.858 ; move to first infill point
G1 Z28.400 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.254597
G1 F2400.000
G1 X104.102 Y99.630 E0.00456 ; infill
;WIDTH:0.24332
G1 X103.751 Y99.118 E0.01035 ; infill
;WIDTH:0.205397
G1 X103.550 Y98.740 E0.00579 ; infill
;LAYER_CHANGE
;Z:28.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
;28.6
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X103.751 Y99.118 E-0.11315 ; wipe and retract
;WIPE_END
G1 E-2.28685 F2400.000 ; retract
G1 Z28.475 F10800.000 ; lift Z
G1 Z28.600 ; move to next layer (142)
;AFTER_LAYER_CHANGE
;28.6
G1 Z28.675 ; lift Z
G1 X108.572 Y104.513 ; move to first perimeter point
G1 Z28.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X108.625 Y104.747 E0.00812 ; perimeter
G1 X108.718 Y104.851 E0.00476 ; perimeter
G1 X108.380 Y104.797 E0.01162 ; perimeter
G1 X108.538 Y104.562 E0.00959 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.625 Y104.747 E-0.05374 ; wipe and retract
G1 X108.718 Y104.851 E-0.03708 ; wipe and retract
G1 X108.380 Y104.797 E-0.09056 ; wipe and retract
G1 X108.538 Y104.562 E-0.07479 ; wipe and retract
;WIPE_END
G1 E-2.14383 F2400.000 ; retract
G1 Z28.675 F10800.000 ; lift Z
G1 X108.358 Y101.768 ; move to first perimeter point
G1 Z28.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
G1 F1800.000
G1 X108.253 Y101.586 E0.00711 ; perimeter
G1 X108.387 Y101.609 E0.00459 ; perimeter
G1 X108.368 Y101.709 E0.00345 ; perimeter
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X108.253 Y101.586 E-0.04451 ; wipe and retract
G1 X108.387 Y101.609 E-0.03576 ; wipe and retract
G1 X108.368 Y101.709 E-0.02689 ; wipe and retract
;WIPE_END
G1 E-2.29284 F2400.000 ; retract
G1 Z28.675 F10800.000 ; lift Z
G1 X107.946 Y104.577 ; move to first perimeter point
G1 Z28.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X107.188 Y104.723 E0.03577 ; perimeter
G1 X106.363 Y104.775 E0.03829 ; perimeter
G1 X105.521 Y104.869 E0.03922 ; perimeter
G1 X105.020 Y104.763 E0.02376 ; perimeter
G1 X104.684 Y104.296 E0.02665 ; perimeter
G1 X104.191 Y103.269 E0.05274 ; perimeter
G1 X103.974 Y102.922 E0.01900 ; perimeter
G1 X103.916 Y102.385 E0.02501 ; perimeter
G1 X104.121 Y101.702 E0.03301 ; perimeter
G1 X104.195 Y101.551 E0.00781 ; perimeter
G1 X104.313 Y101.189 E0.01763 ; perimeter
G1 X104.591 Y100.966 E0.01649 ; perimeter
G1 X104.779 Y100.864 E0.00993 ; perimeter
G1 X105.039 Y100.833 E0.01210 ; perimeter
G1 X105.297 Y100.898 E0.01231 ; perimeter
G1 X105.486 Y100.905 E0.00879 ; perimeter
G1 X107.453 Y101.612 E0.09679 ; perimeter
G1 X107.718 Y101.757 E0.01399 ; perimeter
G1 X107.880 Y101.899 E0.01000 ; perimeter
G1 X108.062 Y102.231 E0.01752 ; perimeter
G1 X108.201 Y103.292 E0.04956 ; perimeter
G1 X108.264 Y104.108 E0.03789 ; perimeter
G1 X107.980 Y104.528 E0.02349 ; perimeter
G1 X107.971 Y104.977 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.188 Y104.723 E-0.21525 ; wipe and retract
G1 X106.363 Y104.775 E-0.21811 ; wipe and retract
G1 X105.521 Y104.869 E-0.22345 ; wipe and retract
G1 X105.020 Y104.763 E-0.13537 ; wipe and retract
G1 X104.684 Y104.296 E-0.15182 ; wipe and retract
G1 X104.191 Y103.269 E-0.30047 ; wipe and retract
G1 X103.974 Y102.922 E-0.10824 ; wipe and retract
G1 X103.916 Y102.385 E-0.14249 ; wipe and retract
G1 X104.121 Y101.702 E-0.18806 ; wipe and retract
G1 X104.195 Y101.551 E-0.04446 ; wipe and retract
G1 X104.313 Y101.189 E-0.10043 ; wipe and retract
G1 X104.591 Y100.966 E-0.09394 ; wipe and retract
G1 X104.779 Y100.864 E-0.05656 ; wipe and retract
G1 X105.039 Y100.833 E-0.06894 ; wipe and retract
G1 X105.297 Y100.898 E-0.07015 ; wipe and retract
G1 X105.486 Y100.905 E-0.05010 ; wipe and retract
G1 X105.886 Y101.049 E-0.11217 ; wipe and retract
;WIPE_END
G1 E-0.12000 F2400.000 ; retract
G1 Z28.675 F10800.000 ; lift Z
G1 X104.615 Y100.404 ; move to first perimeter point
G1 Z28.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Perimeter
;WIDTH:0.45
G1 F1800.000
G1 X104.424 Y100.508 E0.00737 ; perimeter
G1 X104.446 Y100.261 E0.00841 ; perimeter
G1 X104.570 Y100.366 E0.00549 ; perimeter
G1 X103.778 Y98.992 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
;WIDTH:0.6
G1 F2400.000
G1 X104.081 Y99.274 E0.01917 ; perimeter
G1 X104.517 Y99.754 E0.03007 ; perimeter
G1 X104.696 Y99.841 E0.00920 ; perimeter
G1 X104.976 Y100.078 E0.01703 ; perimeter
G1 X105.320 Y100.155 E0.01629 ; perimeter
G1 X105.869 Y100.370 E0.02732 ; perimeter
G1 X107.752 Y101.010 E0.09211 ; perimeter
G1 X108.454 Y101.131 E0.03300 ; perimeter
G1 X108.933 Y101.050 E0.02251 ; perimeter
G1 X109.189 Y101.038 E0.01186 ; perimeter
G1 X109.567 Y100.965 E0.01784 ; perimeter
G1 X109.674 Y100.968 E0.00497 ; perimeter
G1 X109.441 Y101.240 E0.01659 ; perimeter
G1 X109.150 Y101.418 E0.01582 ; perimeter
G1 X109.023 Y101.608 E0.01058 ; perimeter
G1 X108.846 Y101.777 E0.01133 ; perimeter
G1 X108.777 Y102.152 E0.01765 ; perimeter
G1 X108.755 Y102.303 E0.00704 ; perimeter
G1 X108.785 Y102.821 E0.02406 ; perimeter
G1 X108.878 Y103.448 E0.02936 ; perimeter
G1 X108.915 Y103.841 E0.01830 ; perimeter
G1 X109.068 Y104.519 E0.03216 ; perimeter
G1 X109.378 Y104.866 E0.02155 ; perimeter
G1 X110.053 Y105.217 E0.03525 ; perimeter
G1 X111.747 Y106.045 E0.08737 ; perimeter
G1 X112.390 Y106.321 E0.03239 ; perimeter
G1 X112.892 Y106.475 E0.02433 ; perimeter
G1 X112.954 Y106.561 E0.00491 ; perimeter
G1 X112.948 Y106.722 E0.00748 ; perimeter
G1 X112.845 Y106.915 E0.01011 ; perimeter
G1 X112.634 Y107.580 E0.03233 ; perimeter
G1 X112.518 Y107.872 E0.01458 ; perimeter
G1 X112.360 Y108.467 E0.02851 ; perimeter
G1 X112.329 Y109.037 E0.02641 ; perimeter
G1 X112.538 Y109.587 E0.02730 ; perimeter
G1 X112.794 Y109.767 E0.01452 ; perimeter
G1 X113.382 Y110.271 E0.03583 ; perimeter
G1 X113.821 Y110.613 E0.02580 ; perimeter
G1 X114.187 Y110.943 E0.02283 ; perimeter
G1 X114.380 Y111.083 E0.01102 ; perimeter
G1 X114.844 Y111.520 E0.02951 ; perimeter
G1 X114.979 Y111.693 E0.01018 ; perimeter
G1 X115.060 Y111.899 E0.01027 ; perimeter
G1 X115.083 Y112.056 E0.00732 ; perimeter
G1 X114.808 Y112.134 E0.01323 ; perimeter
G1 X114.574 Y112.098 E0.01095 ; perimeter
G1 X114.327 Y111.971 E0.01285 ; perimeter
G1 X114.231 Y111.863 E0.00672 ; perimeter
G1 X114.209 Y111.747 E0.00546 ; perimeter
G1 X113.834 Y111.400 E0.02365 ; perimeter
G1 X112.857 Y110.571 E0.05937 ; perimeter
G1 X111.671 Y109.644 E0.06971 ; perimeter
G1 X111.301 Y109.420 E0.02002 ; perimeter
G1 X111.218 Y109.318 E0.00609 ; perimeter
G1 X111.217 Y109.291 E0.00129 ; perimeter
G1 X111.290 Y109.211 E0.00499 ; perimeter
G1 X111.391 Y108.985 E0.01147 ; perimeter
G1 X111.603 Y108.760 E0.01431 ; perimeter
G1 X111.718 Y108.526 E0.01209 ; perimeter
G1 X112.077 Y107.459 E0.05215 ; perimeter
G1 X112.061 Y107.135 E0.01500 ; perimeter
G1 X111.922 Y106.875 E0.01366 ; perimeter
G1 X111.509 Y106.574 E0.02369 ; perimeter
G1 X110.811 Y106.261 E0.03542 ; perimeter
G1 X109.759 Y105.754 E0.05409 ; perimeter
G1 X109.562 Y105.640 E0.01054 ; perimeter
G1 X109.008 Y105.418 E0.02765 ; perimeter
G1 X108.777 Y105.349 E0.01116 ; perimeter
G1 X108.209 Y105.258 E0.02668 ; perimeter
G1 X107.204 Y105.252 E0.04653 ; perimeter
G1 X106.642 Y105.273 E0.02607 ; perimeter
G1 X105.245 Y105.237 E0.06473 ; perimeter
G1 X105.078 Y105.223 E0.00774 ; perimeter
G1 X104.868 Y105.141 E0.01044 ; perimeter
G1 X104.676 Y104.883 E0.01493 ; perimeter
G1 X104.309 Y103.911 E0.04809 ; perimeter
G1 X103.972 Y103.176 E0.03746 ; perimeter
G1 X103.676 Y102.461 E0.03587 ; perimeter
G1 X103.612 Y102.231 E0.01104 ; perimeter
G1 X103.664 Y101.799 E0.02018 ; perimeter
G1 X103.852 Y101.156 E0.03100 ; perimeter
G1 X103.964 Y100.308 E0.03962 ; perimeter
G1 X103.851 Y99.696 E0.02881 ; perimeter
G1 X103.796 Y99.269 E0.01998 ; perimeter
G1 X103.709 Y99.064 E0.01031 ; perimeter
G1 X103.727 Y99.008 E0.00269 ; perimeter
G1 X103.993 Y99.329 F10800.000 ; move inwards before travel
G1 X104.225 Y100.919 ; move to first infill point
;TYPE:Gap fill
;WIDTH:0.107552
G1 F2400.000
G1 X104.117 Y100.991 E0.00070 ; infill
G1 X105.154 Y100.489 F10800.000 ; move to first infill point
;WIDTH:0.287093
G1 F2400.000
G1 X105.347 Y100.546 E0.00409 ; infill
;WIDTH:0.188631
G1 X105.555 Y100.591 E0.00258 ; infill
G1 X106.141 Y100.795 E0.00752 ; infill
;WIDTH:0.215567
G1 X107.181 Y101.163 E0.01583 ; infill
;WIDTH:0.229465
G1 X107.597 Y101.310 E0.00686 ; infill
;WIDTH:0.2456
G1 X107.675 Y101.344 E0.00143 ; infill
;WIDTH:0.287379
G1 X107.906 Y101.425 E0.00498 ; infill
G1 X107.964 Y101.633 E0.00440 ; infill
G1 X108.439 Y102.562 F10800.000 ; move to first infill point
;WIDTH:0.20769
G1 F2400.000
G1 X108.523 Y103.259 E0.00961 ; infill
;WIDTH:0.227015
G1 X108.586 Y103.897 E0.00982 ; infill
G1 X108.684 Y103.916 E0.00153 ; infill
G1 X108.009 Y104.914 F10800.000 ; move to first infill point
;WIDTH:0.223384
G1 F2400.000
G1 X107.746 Y104.938 E0.00397 ; infill
;WIDTH:0.181229
G1 X107.482 Y104.963 E0.00305 ; infill
;WIDTH:0.139074
G1 X107.218 Y104.987 E0.00212 ; infill
G1 E-3.60000 ; retract
;WIPE_START
G1 F8640.000
G1 X107.482 Y104.963 E-0.06989 ; wipe and retract
;WIPE_END
G1 E-2.33011 F2400.000 ; retract
G1 Z28.675 F10800.000 ; lift Z
G1 X109.413 Y105.240 ; move to first infill point
G1 Z28.600 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;WIDTH:0.14246
G1 F2400.000
G1 X111.660 Y106.324 E0.02065 ; infill
;WIDTH:0.186991
G1 X111.832 Y106.422 E0.00238 ; infill
;WIDTH:0.231521
G1 X112.004 Y106.521 E0.00311 ; infill
;WIDTH:0.27605
G1 X112.177 Y106.619 E0.00385 ; infill
;WIDTH:0.301383
G1 X112.222 Y106.652 E0.00121 ; infill
;WIDTH:0.326843
G1 X112.250 Y106.678 E0.00091 ; infill
;WIDTH:0.338622
G1 X112.577 Y106.962 E0.01065 ; infill
G1 X112.426 Y106.584 F10800.000 ; move to first infill point
;WIDTH:0.317431
G1 F2400.000
G1 X112.419 Y107.063 E0.01093 ; infill
;WIDTH:0.283453
G1 X112.405 Y107.168 E0.00212 ; infill
;WIDTH:0.245821
G1 X112.392 Y107.274 E0.00179 ; infill
;WIDTH:0.208188
G1 X112.378 Y107.379 E0.00146 ; infill
;WIDTH:0.170556
G1 X112.364 Y107.484 E0.00112 ; infill
;WIDTH:0.132923
G1 X112.257 Y107.784 E0.00239 ; infill
;WIDTH:0.110475
G1 X112.044 Y108.536 E0.00439 ; infill
;WIDTH:0.214605
G1 X112.018 Y108.664 E0.00187 ; infill
G1 X111.973 Y109.439 F10800.000 ; move to first infill point
;WIDTH:0.129746
G1 F2400.000
G1 X112.312 Y109.780 E0.00347 ; infill
G1 X112.613 Y110.002 E0.00269 ; infill
G1 X113.203 Y110.491 E0.00554 ; infill
;WIDTH:0.139989
G1 X114.026 Y111.184 E0.00869 ; infill
;WIDTH:0.164507
G1 X114.470 Y111.580 E0.00601 ; infill
;WIDTH:0.173024
G1 X114.697 Y111.873 E0.00402 ; infill
G1 X114.767 Y111.884 F10800.000 ; move to first infill point
;WIDTH:0.197337
G1 F2400.000
G1 X114.542 Y111.697 E0.00375 ; infill
G1 X114.502 Y111.729 E0.00065 ; infill
;WIDTH:0.190156
G1 X114.463 Y111.761 E0.00062 ; infill
;LAYER_CHANGE
;Z:28.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
;28.8
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.502 Y111.729 E-0.01332 ; wipe and retract
;WIPE_END
G1 E-2.38668 F2400.000 ; retract
G1 Z28.675 F10800.000 ; lift Z
G1 Z28.800 ; move to next layer (143)
;AFTER_LAYER_CHANGE
;28.8
G1 X114.520 Y111.534 ; move to first perimeter point
G1 E6.00000 F3000.000 ; unretract
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X113.958 Y111.227 E0.02964 ; perimeter
G1 X113.288 Y110.670 E0.04039 ; perimeter
G1 X113.197 Y110.530 E0.00772 ; perimeter
G1 X112.699 Y110.184 E0.02810 ; perimeter
G1 X112.122 Y109.696 E0.03499 ; perimeter
G1 X111.913 Y109.544 E0.01196 ; perimeter
G1 X111.881 Y109.432 E0.00542 ; perimeter
G1 X111.687 Y109.326 E0.01025 ; perimeter
G1 X111.645 Y109.268 E0.00330 ; perimeter
G1 X111.643 Y109.191 E0.00356 ; perimeter
G1 X111.748 Y108.975 E0.01113 ; perimeter
G1 X111.920 Y108.483 E0.02414 ; perimeter
G1 X112.030 Y108.339 E0.00842 ; perimeter
G1 X112.249 Y107.425 E0.04352 ; perimeter
G1 X112.217 Y107.145 E0.01306 ; perimeter
G1 X112.133 Y106.807 E0.01615 ; perimeter
G1 X111.843 Y106.469 E0.02062 ; perimeter
G1 X111.490 Y106.367 E0.01700 ; perimeter
G1 X111.299 Y106.277 E0.00977 ; perimeter
G1 X110.868 Y106.015 E0.02336 ; perimeter
G1 X110.533 Y105.916 E0.01620 ; perimeter
G1 X109.171 Y105.277 E0.06966 ; perimeter
G1 X108.694 Y105.167 E0.02271 ; perimeter
G1 X108.606 Y105.112 E0.00476 ; perimeter
G1 X106.749 Y104.994 E0.08620 ; perimeter
G1 X108.066 Y104.690 E0.06261 ; perimeter
G1 X108.407 Y104.253 E0.02569 ; perimeter
G1 X108.385 Y103.427 E0.03825 ; perimeter
G1 X108.316 Y103.081 E0.01633 ; perimeter
G1 X108.319 Y102.907 E0.00809 ; perimeter
G1 X108.188 Y102.236 E0.03167 ; perimeter
G1 X108.017 Y101.825 E0.02061 ; perimeter
G1 X107.697 Y101.586 E0.01851 ; perimeter
G1 X107.487 Y101.466 E0.01121 ; perimeter
G1 X106.152 Y100.971 E0.06596 ; perimeter
G1 X105.798 Y100.802 E0.01818 ; perimeter
G1 X105.327 Y100.688 E0.02245 ; perimeter
G1 X104.858 Y100.613 E0.02199 ; perimeter
G1 X104.390 Y100.780 E0.02301 ; perimeter
G1 X104.179 Y100.983 E0.01356 ; perimeter
G1 X104.112 Y101.098 E0.00618 ; perimeter
G1 X104.113 Y100.584 E0.02380 ; perimeter
G1 X104.154 Y100.233 E0.01636 ; perimeter
G1 X104.142 Y100.060 E0.00804 ; perimeter
G1 X104.175 Y99.824 E0.01104 ; perimeter
G1 X104.497 Y100.009 E0.01721 ; perimeter
G1 X105.101 Y100.276 E0.03063 ; perimeter
G1 X107.216 Y100.989 E0.10336 ; perimeter
G1 X107.594 Y101.137 E0.01883 ; perimeter
G1 X108.559 Y101.302 E0.04535 ; perimeter
G1 X108.946 Y101.324 E0.01795 ; perimeter
G1 X108.660 Y101.819 E0.02649 ; perimeter
G1 X108.604 Y102.486 E0.03099 ; perimeter
G1 X108.828 Y104.400 E0.08926 ; perimeter
G1 X109.167 Y104.924 E0.02894 ; perimeter
G1 X109.812 Y105.321 E0.03509 ; perimeter
G1 X110.300 Y105.561 E0.02517 ; perimeter
G1 X110.480 Y105.699 E0.01053 ; perimeter
G1 X110.602 Y105.713 E0.00566 ; perimeter
G1 X111.212 Y106.006 E0.03138 ; perimeter
G1 X111.318 Y106.086 E0.00614 ; perimeter
G1 X111.480 Y106.127 E0.00774 ; perimeter
G1 X111.740 Y106.263 E0.01358 ; perimeter
G1 X111.857 Y106.359 E0.00699 ; perimeter
G1 X112.310 Y106.532 E0.02250 ; perimeter
G1 X112.387 Y106.580 E0.00418 ; perimeter
G1 X112.533 Y106.755 E0.01058 ; perimeter
G1 X112.612 Y106.809 E0.00443 ; perimeter
G1 X112.534 Y107.273 E0.02178 ; perimeter
G1 X112.193 Y108.331 E0.05147 ; perimeter
G1 X112.110 Y109.133 E0.03739 ; perimeter
G1 X112.346 Y109.656 E0.02655 ; perimeter
G1 X112.853 Y110.115 E0.03168 ; perimeter
G1 X113.727 Y110.792 E0.05122 ; perimeter
G1 X113.998 Y111.027 E0.01659 ; perimeter
G1 X114.103 Y111.164 E0.00802 ; perimeter
G1 X114.293 Y111.289 E0.01051 ; perimeter
G1 X114.483 Y111.486 E0.01268 ; perimeter
G1 X114.184 Y111.316 F10800.000 ; move inwards before travel
G1 X114.594 Y111.630 ; move to first perimeter point
G1 F1800.000
G1 X114.638 Y111.686 E0.00331 ; perimeter
G1 X114.592 Y111.687 E0.00213 ; perimeter
G1 X114.624 Y111.694 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000
G1 X114.638 Y111.686 E-0.01213 ; wipe and retract
G1 X114.592 Y111.687 E-0.01213 ; wipe and retract
;WIPE_END
G1 E-2.37574 F2400.000 ; retract
G1 Z28.875 F10800.000 ; lift Z
G1 X108.892 Y104.943 ; move to first infill point
G1 Z28.800 ; restore layer Z
G1 E6.00000 F3000.000 ; unretract
;TYPE:Gap fill
;WIDTH:0.218418
G1 F2400.000
G1 X108.441 Y104.601 E0.00826 ; infill
G1 X108.575 Y104.428 F10800.000 ; move to first infill point
;WIDTH:0.117168
G1 F2400.000
G1 X108.509 Y104.865 E0.00273 ; infill
G1 E-3.60000 F2400.000 ; retract
;WIPE_START
G1 F8640.000;_WIPE
G1 X108.575 Y104.428 E-0.11649 ; wipe and retract
;WIPE_END
G1 E-2.28351 F2400.000 ; retract
G1 Z28.875 F10800.000 ; lift Z
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
G92 E0
G1 Z58.8 E-35 F1000 ; move print head up & retract filament
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
; filament used [mm] = 604.48
; filament used [cm3] = 1.45
; filament used [g] = 1.51
; filament cost = 0.04
; total filament used [g] = 1.51
; total filament cost = 0.04
; estimated printing time (normal mode) = 29m 35s

; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,210x0,210x210,0x210
; bed_temperature = 70
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 4
; bottom_solid_min_thickness = 0.5
; bridge_acceleration = 1800
; bridge_angle = 0
; bridge_fan_speed = 25
; bridge_flow_ratio = 0.8
; bridge_speed = 30
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
; complete_objects = 0
; cooling = 0
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1800
; default_filament_profile = "Generic PLA @MEGA"
; default_print_profile = 0.15mm QUALITY @MEGA
; deretract_speed = 50
; disable_fan_first_layers = 3
; dont_support_bridges = 1
; draft_shield = 0
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nG92 E0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-35 F1000 ; move print head up & retract filament\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.6
; external_perimeter_speed = 40
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 1
; extruder_clearance_height = 35
; extruder_clearance_radius = 60
; extruder_colour = #808080
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 0
; fan_below_layer_time = 20
; filament_colour = #FFF2EC
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 27.82
; filament_density = 1.04
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 11
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = ""
; filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "Generic ABS @MEGA _ 0302"
; filament_soluble = 0
; filament_spool_weight = 0
; filament_toolchange_delay = 0
; filament_type = ABS
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; fill_angle = 45
; fill_density = 15%
; fill_pattern = gyroid
; first_layer_acceleration = 1800
; first_layer_bed_temperature = 70
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 30
; first_layer_temperature = 240
; full_fan_speed_layer = 0
; gap_fill_speed = 40
; gcode_comments = 1
; gcode_flavor = marlin
; gcode_label_objects = 0
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1800
; infill_anchor = 600%
; infill_anchor_max = 50
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 60
; inherits_cummulative = ;"Generic ABS @MEGA";
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000
; machine_max_acceleration_extruding = 1250
; machine_max_acceleration_retracting = 1250
; machine_max_acceleration_x = 1000
; machine_max_acceleration_y = 1000
; machine_max_acceleration_z = 200
; machine_max_feedrate_e = 60
; machine_max_feedrate_x = 200
; machine_max_feedrate_y = 200
; machine_max_feedrate_z = 8
; machine_max_jerk_e = 5
; machine_max_jerk_x = 8
; machine_max_jerk_y = 8
; machine_max_jerk_z = 0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 30
; max_layer_height = 0.36
; max_print_height = 205
; max_print_speed = 80
; max_volumetric_speed = 0
; min_fan_speed = 20
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 0
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 1800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 60
; perimeters = 2
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.20mm QUALITY @MEGA
; printer_model = I3MEGAS
; printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
; printer_settings_id = Anycubic i3 Mega S
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_layers = 0
; remaining_times = 0
; resolution = 0
; retract_before_travel = 2
; retract_before_wipe = 60%
; retract_layer_change = 1
; retract_length = 6
; retract_length_toolchange = 10
; retract_lift = 0.075
; retract_lift_above = 0
; retract_lift_below = 204
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 40
; seam_position = nearest
; silent_mode = 0
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 6
; skirt_height = 1
; skirts = 0
; slice_closing_radius = 0.05
; slowdown_below_layer_time = 20
; small_perimeter_speed = 30
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0
; solid_infill_speed = 60
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "; Filament gcode\n"
; start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y0 Z1 F100 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0\nG1 E38 F1000; deretract filament\nG92 E0\nG1 X60 Z0 E9 ; intro line\nG1 X100 E12.5 ; intro line\nG92 E0
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_buildplate_only = 1
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 2
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 60
; support_material_synchronize_layers = 0
; support_material_threshold = 55
; support_material_with_sheath = 0
; support_material_xy_spacing = 50%
; temperature = 240
; template_custom_gcode = 
; thin_walls = 0
; threads = 8
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 40
; top_solid_layers = 5
; top_solid_min_thickness = 0.6
; travel_speed = 180
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 0
; wipe_tower_bridging = 10
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 180
; wipe_tower_y = 140
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0