When I was thinking what I can do, I saw that I need the office table. I started to draw with SolidWors. When I was in my work, because of the small place, i would had big table to the small place.
The first, I made FRONT VIEW
The second, I made RIGHT SIDE
The third , I made LEFT SIDE
After, I made TOP
After making the views, I made assembing for correcting the joining mistake I made before
Here I imported all table parts for assembly.
Below is the image of the table assembled.
After making the drawing in SolidWorks I saved in DXFfile
I imported the DXF file in Vcarve software which is used to generate Gcode used by the shopbot.
The original files used for this assignment can be downloaded here.