Assignment-16

Design and produce something with a digital fabrication process (incorporating computer-aided design and manufacturing) not covered in another assignment, documenting the requirements that your assignment meets, and including everything necessary to reproduce it. Possibilities include (but are not limited to):

Shape ball

In this week, I plan to make the shape ball.
I start to draw in coreldraw and I made duplicate and then I cut with laser cutter

Qries

Here below, I made the duplicate my shape

Qries

I started to print the drawing

Qries

Setting the EPILOG, I selected the vector as you see

Qries

I cut the plywood sheet with the laser cutter

Qries

my final result, i made the ball in wood

Qries

here below, there are clothes I used when i was covering my ball

Qries

The safety precaution, I used the glove

Qries

here below, there the composites and the digital scale

Qries

I had 2 liquid products and I mixed. the first had 30g and the second had 30g. it means that they were equal qantity

Qries

after mixing the my that ball I covered the clothes and i vanish the epoxy. after vanishing my ball I kept it to the sun like 3hours and see. it was stronger than before

Qries

The original files used for this assignment can be downloaded here