Group assignment

Individual assignment

I used CNC to cut the Wax that I wanted to get a shape for casting

MDX-40A

So I choose the (Styrenefoam)bluefoam for the testing first.

Here is the setting for bluefoam I used on the SRP Player

Since my STL-file (modle) with a lot of concave shapes, so I chose (Modle with many curved surfaces )

Choosing Partial and Adjusting the outer contour as close as possible to the edge of the model

When I finished the molding, I chose flexible silicone that this material is very soft and translucent for casting. The mixing ratio is 1:1.

Here is the Wax -- Ferris Machinable Wax Block

All materials:

Ferris Machinable Wax Block

SMOOTH-ON CALCULATOR

AB Transparent Silicone

Flexible silicone

Dental Alginate Impression Material

Xencast P2 Resin