WS2813 WS2813 AVR Devices Version 7 - August 1, 2011. Added ATmega164P/324P/644P devices for DIP and TQFP. Version 4 - March 11, 2008. This library now includes ONLY ATMEL AVR microcontrollers. It is the result of merging all other available device libraries available at http://www.cadsoft.de/download as of the time it was made. In addition to the legacy AT90* devices, it includes most ATMEGA devices including the new 48/88/168, most ATTiny devices and a set of ISP and JTAG pin headers. Based on the following sources: <ul> <li>www.atmel.com <li> file at90smcu_v400.zip <li>avr.lbr and atmel.lbr as provided by CadSoft <li>avr-1.lbr by David Blundell <li>avr-2.lbr by Boris Zalokar <li>avr-3.lbr by Carson Reynolds <li>attiny24_44_84.lbr by Pawel Szramowski (ATTiny24/44/84 devices) <li>atmel.lbr by Bob Starr (ISP headers) <li>moates_custom_parts.lbr (edge ISP) <li>other misc sources </ul> <author>Revised by David Blundell (blundar at gmail dot com) and others.</author> <author>Added Mega162, Tiny2313 John Lussmyer (cougar at casadelgato.com)</author> <author>Added XMega A1,A3,A4,D3,D4 John Lussmyer Aug 1, 2011(cougar at casadelgato.com)</author> Wide Plastic Gull Wing Small Outline Package >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE Pin header 1x1 for 0.1" spacing With round pins Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.